User Manual www.lenco.com

Transcription

32" High Definition LED TV
User Manual
www.lenco.com
CONTENTS
Important Safety Instructions
4
Safety Information
5
Preparation
6
What is Included
6
Front View
7
Rear View
8
Installing the Base Stand
9
Removing the Stand for Wall-Mounting
9
Remote Control
10
Connecting External Devices
29
Viewing Photo
29
Listening to Music
30
Viewing Movies
30
My Text
31
2
11
Getting Started
12
Initial set up
12
General operation
12
Basic Features
Entertainment
13
How to Navigate menus-Selecting Source 13
Electronic Programme Guide (EPG) (DTV
Mode)
13
Teletext (ATV Mode)
14
Digital Teletext (DTV Mode)
15
Time Shift Function (DTV Mode)
16
Recording DTV Programme onto a USB
Storage Device
16
Timer Programming
17
Play Recorded Programme
18
Picture Management(ATV/DTV Mode)
18
Sound Management
19
Channel Management (ATV / DTV Mode)
20
Lock System management
24
Setup management
24
EN 3
IMPORTANT SAFETY INSTRUCTIONS
operated.
– All the safety and operating instructions should be read before this product is
– The safety and operating instructions should be retained for future reference.
– All warnings on the appliance and in the operating instructions should be adhered to.
– All operating and use instructions should be followed.
– The appliance should not be used near water or moisture – for
example, in a wet basement or near a swimming pool.
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade
electrician for replacement of the obsolete outlet.
and at the point where they exit from the apparatus.
particularly at the plugs, convenience receptacles,
sold with the apparatus. When a cart or rack is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
any way, such as the power supply cord or plug is damaged, liquid has been spilled, or objects have fallen
into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
such as vases should not be placed on the apparatus.
The wall socket plug is used as disconnect device, the disconnect device shall remain
readily operable.
To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instruction.
alert the user to the presence of non-insulated “dangerous voltage” within the product’s
sk of electric shock.
ed personnel.
triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical earth.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of
properly, have potential adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected
separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.
HDMI:
or registered trademarks of HDMI Licensing LLC.
EN 4
SAFETY INFORMATION
Electrical Safety
!
!
!
"
#
!
#
!
$
!
"
#
!
%
"!
#
#&
"
'
"
%
!
"
#
!!
*!
!
!+
;<
!
!"!
%
#
"
%
<
Physical Safety
#
"!
"!=
>?++@
#
"
"
#
!
J
#
!
>
<@
#
K
*OK
O
!Q!
<
'
"
X
Y!
<!
Z!
Z!
[!
\
%
\
O
!
!
PREPARATION
What is Included
Z
Y_
`
`Z
Z
Z
Z!
Z
^
=''
Quick
Start Guide
;"Z{
]
'Y'OYOQ&
Front View
1
2
3
4
5
6
7
1. IR>Q
Y!@
Y!QY
2. POWER Indicator
Q
Q
3. VOL +/'[!
4. CH
'
5. MENU
#&Z#>
@
6. SOURCE
'
7. POWER
Z
&
}Z
|
'Y'OYOQ&
Rear View
11
10
9
8
7
1
2
1. AV Input
_
Q#& OX#Q& >}Y@ " %
!!
2. SCART Socket
Q
%
!
3. PC AUDIO Input
_
4. VGA Input
_
!
{O
5. RF(|) Input
_
>|$}X$@
"Y%
6. MINI YPBPR
_
O!
>=}'}'@!
"
_&^'&Q#&OX#Q&
Q>}Y@
7. Headphone Socket
_
$
8. HDMI Inputs
_
$*#<
>$#@
!
~
3
4
5
6
9. CI Slot
X
_QO_Q
! 10. USB Port
_
XZ`!
>XZ`
@
11. COAXIAL Digital Audio Output
_
"
'Y'OYOQ&
Installing the Base Stand
*
!
2. % !
%
!
Removing the Stand for Wall-Mounting
1. *
!
2. X

!
3. O *
" " ^
*
"
WARNING: X
"

'Y'OYOQ&
Remote Control

_&_Q{YO#Q_Z

GETTING STARTED
Initial Setup
Initial Setup
1. Connect one end of the RF coaxial cable to
the aerial socket on the wall and the other
2. Connect the mains cable to the mains socket
5. If you want to skip the DTV tuning, press the
MENU
may repeat the above step if you also want to
General Operation
3. In standby mode, press the POWER button at
the bottom of the TV or the button on the
4. The first time you turn the TV on, it will go
straight into First Time Setup
the
buttons to navigate the menu and
Press the SOURCE button on the remote
control and select DTV to switch the TV to
Information Banner
Whenever you change channel using the CH+/
CH- buttons or the number buttons, the TV
displays the broadcast picture along with an
information banner on the top left of the screen
First Time Setup
OSD Language
Mode Setting
Country
Tuner Type
Auto Scan
English
Home Mode
Hungary
Antenna
DTV+ATV
Start
Move
Adjust
MENU: Return
EXIT: Exit
OSD Language
Selects your desired language to be
Mode Setting
Store Mode: For store demo, the brightness
Country
Selects the country where you will operate
Tuner Type
Selects the Tunner Type：
Auto Scan
Selects the auto scan type: DTV+ATV / DTV
Start
Press the OK
the progress of the tuning and the number of
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip
EN 12
EXIT: Exit
The information banner can be displayed at
any time while watching TV by pressing the
DISPLAY
BASIC FEATURES
How to Navigate Menus - Selecting Source
1. Press the SOURCE button at the bottom of
the TV or the SOURCE button on the remote
SOURCE
DTV
ATV
SCART
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
USB
buttons to select the input
2. Press the
source that you want: DTV / ATV /SCART /
AV / YPbPr / HDMI1 / HDMI2 / HDMI3 / PC
3. Press OK
Electronic Programme Guide (EPG) (DTV Mode)
Info bar commands:
This system has an Electronic Programme
Guide (EPG) to help you navigate through all
RED
Press the RED button to view the schedule of
The EPG supplies information such as
programme listings, start and end times for
information about the programme is often
available in the EPG (the availability and amount
of programme information will vary, depending
This function can be used only when the EPG
information is broadcast by broadcasting
The EPG displays the programme details for the
1. Press the EPG
’s
e
wearing flippers and a mask he’s
009 BBC FOUR
10:00 Big Cook Little Cook
071 CBeebies
10:25 Bob the Builder
081 BBC Parliament
10:40 Me Too!
087 Community
11:00 Something Special
PrevDate
Move
BLUE (Reminder)
Press the BLUE button while on the selected
programme, the Reminder setting menu will be
11:35 Our Planet
Schedule
List will then be displayed with your preset
YELLOW button
REC
11:15 Doodle Do
NextDate
YELLOW
26 Dec 2008 10:21:43
26 Dec 2008 10:00 - 26 Dec 2008 10:25 Big Cook Little Cook
302 302
YELLOW (Schedule)
Press the YELLOW button to view the preset
Press the
buttons to adjust the settings
and then press the Save button to confirm the
PROGRAM GUIDE
301 301
GREEN (Next Date)
Press the GREEN button to view the schedule
Reminder
T: Exit
OK
Press to display detailed information of the
2. Press EPG button or EXIT button again
to switch off EPG and return to normal TV
EN 13
BASIC FEATURES
Teletext (ATV Mode)
Teletext is a free service broadcast by some
TV stations which gives up-to-the-minute
information on news, weather, television
programmes, share prices and many other
Page HOLD
If the page of text you have selected contains
subpages, these subpages will automatically be
displayed in order with a delay to allow you to
can view pages of information that are listed in
To Turn on Teletext Function
Make sure the TV channel you are watching
“No Teletext” sign will show on the screen if teletext
In ATV mode, press the
Press the
TTX button to enter
INDEX button to
To stop moving to the next sub page, press the
HOLD
To continue moving through the sub pages,
press the
HOLD
Alternative: Press the
SUBPAGE button,
and then use the 0-9 buttons to enter a 4-digit
page number.
To Reveal Information
Press the
REVEAL button to reveal
Press the
REVEAL button again to conceal
TTX button once to exit and the
To select a page of text
Find the number of the page in the index and
enter it using the 0-9
the page will appear on the top left corner of the
Fasttext
At the bottom of the teletext screen is a row of
The remote control has a row of colour buttons
corresponding to the row of coloured subjects
To move to the next page of text, press the
To move to the previous page, press the
To return to the index page, enter the “100” by
INDEX
using the 0-9 buttons or press the
Mix
To view a page of text while watching a TV
programme, press the
TTX
The text will be superimposed over the TV
Double height text
If you have difficulty reading the text on the TV
Press the
SIZE
Press the
SIZE
half of the page will be displayed in double
Press the
EN 14
SIZE button again to return to the
Pressing one of the colour buttons will take you
directly to the page corresponding to the subject
BASIC FEATURES
Digital Teletext (DTV Mode)
Digital teletext can access special digital teletext
services and specific services which broadcast
1. In DTV mode, press the
TTX button to
2. Press the 0-9 buttons to select a page
3. Follow the instructions on digital teletext and
move onto the next step by pressing OK,
, RED, GREEN, YELLOW, BLUE or 0-9
4. To change digital teletext service, select a
different service by pressing the 0-9 buttons
or the
Alternative: You may press the RED button
to the
TTX button to display the teletext
information when you see a red logo
displayed on the screen (e.g. BBC).
5. Press the
TTX
This function allows the TV to virtually record
Note: If the transfer rate of the USB storage
device is too slow for recording or time shift
function, a warning statement will be shown on
the screen. If this happens, please upgrade your
USB storage device.
1
Time Shift Mode and Recording functions
00:00:06
Stop the time-shift function before switching
2
00:01:36
Available Time
345:14:08 / 345:15:44
Pause
During normal TV viewing, you may press the
TIMESHIFT button to virtually pause the live
viewing broadcast programme if you want to
II
When you have returned, press the
button
to display the PVR Time Shift progress bar and
buttons to select “ ” on the
then press the
OK button to play the missed
” will show on the
FB
FF
Prev. Next
3
Stop
The ‘PVR Time Shift Progress Bar’
1 Indicates the status of the currently
displayed video ( / /
/
)
2 Indicates the time lagging behind
the live broadcast (PVR reviewing)
3 Indicates the available recording
time on your USB storage device
The video and sound may have a little bit of
delay or be out-of-sync for a few seconds when
the unit starts to playback the missed broadcast
EN 15
BASIC FEATURES
Using the Remote Control
or
You can shift playback to any point of the
TIMESHIFT button to display the PVR Time
TIMESHIFT
During playback, press the
TIMESHIFT button to display
screen and then press the
button to display a still
button again to resume
or
When playing,
OK /
button repeatedly to speed up
x2/x
button repeatedly to speed up
x2/x
If you want to exit the PVR Time Shift progress bar and
return to the current live broadcast, press the OK / button
and then press the
Recording DTV Programme onto a USB Storage Device
Use this function to record the DTV programme
you are watching on the main screen and save
programme or direct recording may have a
little bit of delay when it starts to record the
If a hard disk is used, make sure its mains
If a USB hub is used, make sure its mains
adapter is connected to the mains supply as the
The maximum supported storage space of the
1. Press the
REC button to record the
To display the recording information, press
the
If you want to store the video streaming of a DTV
programme, the transfer rate of the USB storage
device must not be less than 5MB/s, otherwise
the picture and sound of the programme will be
affected and a warning statement will be shown
The TV screen will be blank temporarily as it will
take time to start up and stabilise the connected
Recording
Recorded Time : 00 : 00 : 47
Available Time: 3837 Minute
16 QVC
A Traditional Christ
2. Press the
Recording will stop automatically when the
EN 16
may vary depending on the brand and the
Disconnect the USB storage device if it is not
BASIC FEATURES
Timer Programming
The recording from timer programme or direct
recording may have a little bit of delay when it
Start time (for Mode Once, Daily, Weekly,
buttons to adjust the
Weekday) Press the
End time (for Mode Once, Daily, Weekly,
buttons to adjust the
Weekday) Press the
3. After finishing all the recorder adjustments,
press the Save button to confirm your
1. Press the EPG
The EPG
26 Dec 2008 10:21:43
PROGRAM GUIDE
26 Dec 2008 10:00 - 26 Dec 2008 10:25 Big Cook Little Cook
’s
e
4. The Scheduled Record Setting List will
then be displayed with your preset reminders
wearing flippers and a mask he’s
Scheduled Record Setting List
009 BBC FOUR
10:00 Big Cook Little Cook
071 CBeebies
10:25 Bob the Builder
081 BBC Parliament
10:40 Me Too!
087 Community
11:35 Our Planet
NextDate
Schedule
10:03
Group Frequency
11:15 Doodle Do
302 302
25 Dec 2008
Standby
11:00 Something Special
301 301
PrevDate
Scheduled Record
Function
Reminder
Delete One
Delete All
T: Exit
Move
Move Up
2. Press the (REC) button on the remote
control while on the selected programme,
the Scheduled Record menu will be
buttons to select
the settings in the RECORD menu for the
Frequency, Channel, Start time, and End
Scheduled Record - Group 1
Move Down
Select
MENU
EXIT
Return
Exit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel
Date
Start Time
Duration
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
5. Press the EXIT
When the preset time is reached, the TV will start
Setting Status
Setting Is Not In Use
Frequency
Channel
1 BBC ONE
Move Down
Start Time
2008-12-25
1 0 : 0 5
Adjust
O
MENU
EXIT
Off
Move Up
Adjust
Select
Return
Exit
Frequency
Press the
If a programme recording starts when the TV is in
standby mode, the LED indicator will alternatively
End Time
2008-12-25
1 0 : 1 5
Save
buttons to select the frequency
Channel
Press the OK button and then press the
buttons to select the channel that you want to
EN 17
BASIC FEATURES
You can play a recorded programme from the
recorded programme list or from a USB Storage
FileName
VideoCodec :
Resolution
Bitrate :
AVI
MPEG4
640 x 480
4158120 bps
AudioCodec :
MP3
SampleRate :
44100 Hz
Channel :
2
1. Press the SOURCE button on the bottom
of the TV or the SOURCE button on the
remote control then press the
buttons to
select the USB mode and then press the OK
00 : 00 : 22
2. Press the
buttons to select MOVIE and
then press the OK
00 : 05 : 13
Quick Menu
Press the OK button or the DISPLAY button
buttons and then press the OK button to
/ FF / Stop / Quick Menu (Repeat / Encode
Photo
Music
Movie
Text
7. Press the EXIT button to return to the
buttons to select your storage
3. Press the
device and then press the OK
Movie
Picture Management (ATV / DTV Mode)
USB1
USB1
1. Press the MENU button to display the
buttons to select
Picture in the main menu, then press the
or OK
Move
Change Page
OK Select
Quick Menu
EXIT Return
2. Press the
4. Press the
buttons to select the “
usbrecord ” folder and then press the OK
Movie
buttons to select the option you
3. Press the
buttons to change the
TIPS:
USB1/Movie
1/1
You can change the value of brightness,
contrast, sharpness and saturation when
AITEMP
MY PVR
Movie
Music
Photo
Text
LE32G
You can press P.MODE button on the
remote control to change the Picture Mode
Move
T Return
5. Press the
buttons to select your recorded
button to
programme and then press the
Picture
Picture Mode
Brightness
Contrast
Sharpness
Saturation
Hue
Color Temp
Aspect Ratio
Move
EN 18
Adjust
Standard
50
50
50
50
0
Standard
16:9
MENU: Return
EXIT: Exit
BASIC FEATURES
Sound Management
Picture Management
Picture Mode
Allows the selection of a picture-enhancement
technical from among the following options:
1. Press the MENU button to display the main
buttons to select Sound
in the main menu, then press the or OK
Brightness
This item can adjust the optical fiber output of
the entire picture; it will affect the dark region of
2. Press the
Contrast
This item can adjust the highlight intensity of
the picture, but the shadow of the picture is
3. Press the
TIPS:
You can change the value of treble and
You can press the S.MODE button on the
remote control to change the Sound Mode
Sharpness
This item can adjust the peaking in the detail of
Saturation
This item can adjust the saturation of the color
Sound
Sound Mode
Treble
Bass
Balance
Surround Sound
EQ Setting
AVL
SPDIF
Hue
This item may use in compensating color
changed with the transmission in the NTSC
Color Temp
This item can increase or reduce warm color of
the picture personally (red), and the cold color
that means it will increase the blue tone for the
Move
Adjust
Standard
0
0
0
Off
On
PCM
MENU: Return
EXIT: Exit
Sound Mode:
Allows the selection of an audio-enhancement
technical from among the following options:
change the value of Treble and Bass when the
Aspect Ratio
Allows you to watch the screen in various
picture formats: Auto / 4:3 / 16:9 / Zoom1 /
Advanced Settings
Noise Reduction: Reduces the noise level of
the connected device (Medium / Strong / Off
Dynamic Contrast: Adjusts the dynamic
4. Press the EXIT
Treble
Controls the relative intensity of higher-pitched
Bass
Controls the relative intensity of lower-pitched
Balance
Adjusts the relative volume of the speakers in a
Surround Sound
EQ Setting
Allows the selection of an equalizer mode: Off
AVL
EN 19
BASIC FEATURES
Sound Management (ATV / DTV Mode)
SPDIF Mode
Select the digital audio output mode: Auto / Off
Auto Scan
Use this to automatically find and store
Audio Description
recommended if some channels have been
added or removed by the broadcaster or you
Stereo / Dual Sound Reception (ATV Mode)
When a programme is selected, press the
NICAM button to display the sound information
Brodcast
buttons to select
Channel in the main menu, then press the
or OK
On Screen Display
Mono
Mono
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
Mono sound selection
If the stereo signal is weak in stereo reception, you
can switch to mono by pressing the NICAM
switch back to stereo, press the NICAM
Language selection for dual language broadcast
If a programme can be received in two languages
(dual language), you can swith to DUAL I, DUAL II,
DUAL I+II or Mono by pressing the NICAM button
DUAL I
Sends the primary broadcast language to
the loudspeakers
DUAL II
Sends the secondary broadcast language
to the loudspeakers
DUAL I+II
Sends the primary and secondary
broadcast languages to the loudspeakers
Channel
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
CICAM Profile Edit
Move
MENU: Return
EXIT: Exit
2. Press the
buttons to select Auto Scan
and then press the OK button to enter sub-
Auto Scan
Country
Mode
Start
Move
Hungary
DTV+ATV
Adjust
3. Press the
MENU: Return
EXIT: Exit
buttons to navigate the
Country
Selects the country where you will operate the
Mode
Selects the auto scan mode: DTV+ATV/DTV/
Start
Press the OK
EN 20
BASIC FEATURES
Manual Scan (ATV Mode)
Allows you to make manual fine tuning
adjustments if the channel reception is poor
under ATV mode.
Auto Scan
Scanning CH34
buttons to select
main menu. Press the
or OK button, it will highlight the first option.
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip
EXIT: Exit
If you stop the tuning before it has
finished, the TV will report a no signal
error. This is normal because all previous
channel memory has been cleared before
tuning is carried out.
Manual Scan (DTV Mode)
Allows you to make manual fine tuning
adjustments to the channel under DTV mode.
buttons to select
Channel
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
CICAM Profile Edit
Move
OK: Select
MENU: Return
EXIT: Exit
2. Press the
buttons to select Manual Scan
and then press the OK button. On the submenu, select Analog Manual Scan and then
press the OK button.
Analog Manual Scan
Channel
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
CICAM Profile Edit
Move
Analog Scan
Channel to Save
Color System
Sound System
AFC
Start
Antenna
Move
OK: Select
MENU: Return
EXIT: Exit
buttons to select Manual Scan
2. Press the
and then press the OK button. On the submenu, select Digital Manual Scan and then
press the OK button.
Move
Adjust
CH21
474.00 MHz
0
0~9: Input
MENU: Return
0~9: Input
MENU: Return
EXIT: Exit
Analog Scan
Displays the current frequency, press the
buttons to change the frequency.
Channel to Save
buttons to select Channel to Save,
Press the
buttons to select channel number
press the
you want to store.
Color System
buttons to select Color System,
Press the
buttons to select: Auto / PAL/
press the
SECAM.
Digital Manual Scan
Digital Scan
Start
Frequency
Strength
Fine tune
420.25 MHz
CH001
Auto
Auto
Off
EXIT: Exit
Digital Scan
buttons to select the desired
Press the
channel.
Start
buttons to select Start and then
Press the
press the OK button to start tuning.
Sound System
buttons to select Sound System,
Press the
buttons to select: DK/I / BG/L.
press the
AFC
Press the
buttons to select AFC, press the
buttons to select On or Off.
Start
buttons to select Start, press the
Press the
buttons to start tuning.
EN 21
BASIC FEATURES
Channel Edit (DTV mode)
buttons to select
Channel Edit (ATV mode)
buttons to select
Channel
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
CICAM Profile Edit
Move
Channel
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
CICAM Profile Edit
Antenna
OK: Select
MENU: Return
EXIT: Exit
2. Press the
buttons to select Channel Edit
and then press the OK button to enter submenu.
Move
OK: Select
MENU: Return
EXIT: Exit
buttons to select Channel Edit
2. Press the
and then press the OK button to enter submenu.
Channel Edit
Channel Edit
Delete
Move
Delete
Move
Skip
Page
Move
OK: Select
MENU: Return
EXIT: Exit
Delete
Press the RED button to delete the selected
channel.
Skip
Press the GREEN button to select the channels
that you want to skip when you are selecting
channels. Press the GREEN button again to
undo it.
Move
Press the BLUE button and then press the
buttons to move to the selected channel. Press
the BLUE or the OK button to confirm.
Skip
Page
Rename
OK: Select
Move
MENU: Return
EXIT: Exit
Delete
Press the RED button to delete the selected channel.
Skip
Press the GREEN button to select the channels that
you want to skip when you are selecting channels.
Press the GREEN button again to undo it.
Rename
Press the YELLOW button to rename the selected
channel. Press the
buttons to select the
characters to represent the station name. Press the
buttons to move to the next character and then
press the OK button again to confirm the new name.
Move
Press the BLUE button and then press the
buttons to move to the selected channel. Press the
BLUE or the OK button to confirm.
Favorite List
Press the FAV button to display the Favorite List,
press the GREEN button to set the channel that
you are currently watching as one of the favorite
programmes. Press the RED button to delete the
selected channel from the favorite list.
EN 22
BASIC FEATURES
Common Interface (DTV mode)
To view the module information.
buttons to select
or OK button.
2. Press the
buttons to select Common
Interface and then press the OK button.
Common Access Module
Channel
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
CICAM Profile Edit
Move
Antenna
To insert the Common Access Module
OK: Select
MENU: Return
EXIT: Exit
3. A Common Interface main menu will pop up.
buttons to select the items and
Press the
press the OK button to confirm.
1. Before you insert the Common Access Module, ensure
that the TV is switched off and the viewing card is
inserted in accordance with the Service Provider’s
instructions.
2. Insert the Common Access Module into the slot. Flip
the Common Access Module to another side and try
again if you feel resistance.
3. Switch the TV on.
Common Interface
Viaccess Conditional Access
Main Menu
To remove the Common Access Module
1. Consultation
2. Settings
3. Upgrade
1. Before you remove the Common Access Module,
ensure that the TV is switched off.
2. Pull the Common Access Module from the slot.
Press ‘OK’ to confirm, ‘EXIT’ to quit
Move
OK: Select
MENU: Return
EXIT: Exit
4. Press the EXIT button to exit the menu.
The common interface allows the use of a
Common Access Module to enable you to
view scrambled (pay to view) services. These
services are provided by TopUp TV (UK only)
and others. The Common Access Module and
viewing card can be obtained from the service
provider.
3. Switch the TV on.
Signal Information (DTV mode)
buttons to select
or OK button.
2. Press the
buttons to select Signal
Information and then press the OK button to
view the Signal Information..
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface
and cause a malfunction.
This feature is not available in all country.
Signal Information
Network Name
Channel
Frequency
Modulation
Strength
Quality
South Yorkshire.
CH22
482.00 MHz
84 QAM
96
49
MENU: Return
CI (Common Interface)
Allows the Common Access Module to be
inserted and access the content that has been
encrypted.
EXIT: Exit
3. Press the EXIT button to exit the menu.
CICAM Profile Edit (DTV mode)
buttons to select CICAM
1. Press the
Profile Edit and then press the OK button to
enter sub-menu.
EN 23
BASIC FEATURES
Lock System Management
Lock System Management
buttons to select Lock
System in the main menu, then press the
or the OK button, it will highlight the first
Lock Keypad
2. Use the 0-9 buttons to input a 4-digit
New Password
Use the 0-9 buttons to input the new 4-digit
3. Press the
4. Press the
Clear Lock
Reset all the lock settings except the new
5. Press the EXIT
Lock System
____
Off
Enter Password
Enable
Channel Locks
Parental Rating
None
Off
____
New Password
Clear Lock
Move
System must be set On for this function to
0~9: Input
MENU: Return
EXIT: Exit
Setup Management
If you change the password, be sure to
remember the new password! If you forget
the new password, press the master
password
Enter Password
To access the Lock System menu, you must
“0000
OSD Language
buttons to select Setup
in the main menu, then press the or the OK
2. Press the
buttons to select OSD
Language and then press the
buttons
to select your desired on-screen display
Enable
The lock system is designed to prevent
accidental returning of the TV/losing channels
and prevent children watching unsuitable
Setup
The Lock System must be set to On for this
On, a valid password must be entered when you
access Auto Scan / Manual Scan / Channel Edit
Channel Locks
Channel Locks is designed to prevent children
channel is blocked, a valid password must be
Parental Rating
This function allows you to set up blocking
Press the
EN 24
buttons to select an age rating:
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
Adjust
3. Press the EXIT
English
On
Home Mode
MENU: Return
EXIT: Exit
BASIC FEATURES
Setup Management
Audio Languages (DTV Mode)
Subtitle
Mode
Subtitle Primary Language
Subtitle Secondary Language
Hearing Impaired
On
Magyar
English
Off
2. Press the
buttons to select Audio
Languages and then press the OK
Move
MENU: Return
EXIT: Exit
Mode:
Setup
English
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
Adjust
Subtitle Primary Language
buttons to select your desired
Press the
On
Home Mode
Adjust
MENU: Return
EXIT: Exit
3. Press the
button
buttons to select your
and then press the
Subtitle Secondary Language
Press the
Hearing Impaired
buttons to turn On/Off hearing
Press the
3. Press the EXIT
Audio Languages
Audio Primary Language
Audio Secondary Language
Magyar
English
Teletext
Move
Adjust
MENU: Return
EXIT: Exit
4. Press the EXIT
2. Press the
buttons to select Teletext and
then press the OK
Subtitle (DTV Mode)
3. Press the
button
and then press the
2. Press the
buttons to select Subtitle and
then press the OK
Teletext
Digital Teletext Language
Decoding Page Language
Magyar
East EUR
Setup
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
English
Move
Adjust
MENU: Return
EXIT: Exit
4. Press the EXIT
On
Home Mode
MENU: Return
EXIT: Exit
EN 25
BASIC FEATURES
Setup Management
Blue Screen
Time Settings
2. Press the
buttons to select Blue Screen
buttons to select On
and then press the
2. Press the
buttons to select Time
Settings and then press the OK
Time Settings
Setup
OSD Language
Audio Language
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
10 seconds
Off
4 hours
OSD Time
Sleep Timer
Auto Sleep
Time Zone
Time
English
On
Home Mode
Move
Adjust
MENU: Return
Adjust
MENU: Return
EXIT: Exit
EXIT: Exit
3. Press the EXIT
OSD Time
Displays time of the on-screen menu:
Mode Setting
2. Press the
buttons to select Mode Setting
and then press the
Sleep Timer
buttons to select a period of time
Press the
after which the TV automatically switches to
Auto Sleep
The unit will automatically switch to standby
mode 3/4/5 hours after the last time the remote
TV for a long period of time, turn off the auto
Store Mode: For store demo, the brightness
Time Zone
Setup
OSD Language
Audio Language
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
Adjust
Time Settings
English
Select Region
Lisbon GMT
London GMT
Amsterdam GMT+1
Berlin GMT+1
Budapest GMT+1
Madrid GMT+1
Paris GMT+1
On
Home Mode
MENU: Return
EXIT: Exit
Move
3. Press the EXIT
EN 26
OK: SelectM
ENU: Return
EXIT: Exit
BASIC FEATURES
Setup Management
Time
The clock is set automatically when receiving a
Device List
Select Device List to check the information of
Press the RED button to format the selected
Time
On
01 Jan 2010
22:33:11
Time
MENU: Return
Adjust
Move
Device List
On
01 Jan 2010
22:33:11
Auto Sync
Date
Time
Adjust
Device
Available Space
File System
USB1
1188 MB
FAT32
EXIT: Exit
MENU: Return
EXIT: Exit
Function
Format
3. Press the EXIT
Hot Key
Move Up
Move Down
PVR Settings
2. Press the
buttons to select PVR Settings
and then press the OK
OK
Select
MENU
Return
EXIT
Exit
Scheduled Record
Select Scheduled Record to view the scheduled
Scheduled Record Setting List
Scheduled Record
25 Dec 2008
Standby
10:03
Group Frequency
Function
Delete One
Delete All
Move Up
Move Down
buttons to select the following
3. Press the
PVR File System options and then press the
OK
File Manager
Select File Manager to display the recorded
buttons to select
programme list, press the
the recorded programme and then press the OK
or
Select
MENU
EXIT
Return
Exit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel
Date
Start Time
Duration
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
4. Press the EXIT
File Manager
Scheduled Record
Standby
BBC ONE_Pinky and Perky_20081225_100524,is
Function
Replay
Delete One
Delete All
Zoom In/Out
Move Up
Move Down
Select
MENU
EXIT
Return
Current Playing File Info
Channel Name
BBC ONE
Program Name
Pinky and Perky
Recorded Time
25 Dec 2008 10:05
Total Time
00:00:20
Exit
EN 27
BASIC FEATURES
Setup Management
First Time Setup
Auto Download
The TV auto detects the latest firmware through
the DTV signal and upgrades the firmware
2. Press the
buttons to select First Time
Setup and then press the OK
OAD
Manual OAD Download
Auto Download
Off
Setup
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
First Time Setup
OAD
Reset
On
Home Mode
Move
Move
t
3. Press the
MENU: Return
EXIT: Exit
MENU: Return
EXIT: Exit
4. Press the EXIT
buttons to navigate the
search automatically for analogue and digital
Reset
4. Press the EXIT
OAD (Over Air Download)
2. Press the
buttons to select Reset and
then press the OK
2. Press the
buttons to select OAD and then
press the OK
Setup
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
First Time Setup
OAD
Reset
Move
3. Press the
Setup
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
First Time Setup
OAD
Reset
Move
On
Home Mode
MENU: Return
3. Press the
t
MENU: Return
EXIT: Exit
buttons to select Yes or No on
EXIT: Exit
buttons to select the over air
Manual OAD Download
The TV auto detects the latest firmware through
the DTV signal and allows you to accept or
Setup
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
First Time Setup
OAD
Reset
Move
EN 28
On
Home Mode
Reset
On
Home Mode
No
Yes
t
MENU: Return
EXIT: Exit
ENTERTAINMENT
Entertainment
Using the Features via USB Port
Viewing Photo
1. Switch off the TV before connecting any USB
1. Press the SOURCE button on the bottom of
control then press the
buttons to select
the USB mode and then press the OK
2. Connect your USB storage device to the USB
3. Press the button on the bottom of the TV
button on the remote control to turn
or the
2. Press the
buttons to select Photo and
then press the OK
buttons to select USB and then press the
OK
Photo
Music
Movie
Text
Attention:
Some versions of portable hard disk may
require more power than the TV USB socket
3. Press the
1/1
Photo
USB1
If a USB hub is used make sure its mains
adapter is connected to the mains supply as
...
USB1
The maximum supported storage space of the
Move
If you want to store the video streaming of
a DTV programme, the transfer rate of the
USB storage device must not be less than
5MB/s, otherwise the picture and sound of
the programme will be affected and a warning
CH + / - Change Page
OK Select
Quick Menu
EXIT Return
4. Press the
buttons to navigate in the
picture folder and then press the OK
If you want to select the specified photos,
press the
buttons to select the picture
file and then press the OK
happens, please upgrade your USB storage
Photo
The TV screen will be blank temporarily as
it will take time to start up and stabilize the
USB1/Photo
...
starting time may vary depending on the brand
and the memory size of the connected hard
Disconnect the USB storage device if it is not
AITEMP
MY PVR
Movie
Music
Photo
Text
LE32G
Photo
Move
CH + / - Change Page
5. Press the
OK Select
Quick Menu
EXIT Return
or OK
6/12
g
Date 2010-05-13 20:28:40
Resolution 1366x768
Previous / Next
Rotate
EXIT Back
Quick Menu
EN 29
ENTERTAINMENT
Entertainment
Press the OK button or the DISPLAY button to
display the function bar: Play / Pause / Previous
/ Next / Rotate / Quick Menu (Interval Time /
If this folder also contains music files,
you can select a music track to play at
5. Press the
or OK
Music
USB1/Music/Call Me Maybe.mp3
1/1
Call Me Maybe.mp3
1/2
Call Me Maybe.mp3
7.Press the EXIT button to return to the previous
Title
Artist
Album
Track
Year
Date
FileSize
Good Time.mp3
Call Me Maybe
Carly Rae Jepsen
Call Me Maybe
2012-02-27
2013-02-01
3.9MB
00 : 00 : 22
Move
Listening to Music
buttons to select
2. Press the
buttons to select Music and
then press the OK
CH+/- FileList
OK Select
00 : 03 : 13
Quick Menu
EXIT Return
Press the
buttons and then press the OK
button to select the function: Play / Previous /
Viewing Movies
buttons to select
PhotoM
usic
MovieT
2. Press the
buttons to select Movie and
then press the OK
ext
3. Press the
Music
Photo
Music
Movie
Text
USB1
USB1
Title
Artist
Album
Track
Year
Date
FileSize
00 : 00 : 00
Move
Change Page
CH+/- Player
OK Select
00 : 00 : 00
Quick Menu
3. Press the
EXI
T Return
Movie
USB1
4. Press the
music folder and then press the OK
you want to select the specified music, press
the
buttons to select the music file and
then press the OK
USB1
Move
Change Page
OK Select
Quick Menu
EXIT Return
Music
USB1/Music
1/1
AITEMP
Title
Artist
Album
Track
Year
Date
FileSize
MY PVR
Movie
Music
Photo
Text
LE32G
00 : 00 : 00
Move
EN 30
Change Page
CH+/- Player
OK Select
00 : 00 : 00
Quick Menu
EXI
T Return
4. Press the
movie folder and then press the OK
you want to select the specified movie, press
the
buttons to select the movie file and
then press the OK
ENTERTAINMENT
Entertainment
Movie
4. Press the
buttons to navigate in the text
folder and then press the OK
want to select the specified text file, press
buttons to select the text file and then
the
press the OK
USB1/Movie
1/1
AITEMP
MY PVR
Movie
Music
Photo
Text
LE32G
Text
Move
Change Page
OK Select
Quick Menu
USB1/Text
EXIT Return
1/1
AITEMP
MY PVR
5.Press the
Movie
or OK
FileName
VideoCodec :
Resolution
Bitrate :
Music
Photo
Text
AVI
MPEG4
640 x 480
4158120 bps
AudioCodec :
MP3
SampleRate :
44100 Hz
Channel :
2
LE32G
Move
Change Page
OK Select
Quick Menu
EXIT Return
Text
USB1/Text/English Music .txt
1/1
English Music .txt
1 Why are you so far from me?
In my arms is where you ought to be.
2 How long will you make me wait?
I don’t know how much more I can take.
00 : 00 : 22
3 (Chorus:)
I missed you
But I haven’t met you
Oh but I want to
How I do
Quick Menu
00 : 05 : 13
Press the OK button or the DISPLAY button to
buttons
and then press the OK button to select the
function: Pause / Previous / Next / FB / FF / Stop
4
Move
Change Page
5. Press the
OK Select
Slowly counting down the days
Quick Menu
EXIT Return
or OK
7.Press the EXIT button to return to the previous
1/12
1
Why are you so far from me?
2 How long will you make me wait?
I don’t know how much more I can take
3 (Chorus:)
I missed you
But I haven’t met you
Oh but I want to
How I do
My Text
buttons to select
2. Press the
buttons to select Text and then
press the OK
Photo
Music
Movie
Text
4
Slowly counting down the days
Previous / Next
0~9: Goto Page
Quick Menu
EXIT Return
Press the OK button or the DISPLAY button
buttons and then press the OK button to
select the function: Previous / Next / Goto
Page / Quick Menu (Repeat / Background
If this folder also contains music files, you
can select a music track to play at the
3. Press the
Text
USB1
USB1
Move
Change Page
OK Select
Quick Menu
EXIT Return
EN 31
SPECIFICATION
Panel Size
Display Type
Panel Technology
Panel 60 Hz Vs. 120 Hz
Display Resolution
Panel Resolution
Aspect Ratio
Dynamic Contrast Ratio-Panel
Brightness (Centre Typ.) Cd/M²
Response Time (G To G)
Lamp Life (Typ. Hours)
Horizontal Viewing Angle (At CR>10)
Vertical Viewing Angle (At CR>10)
Wall-mount(LxW-mm)
31.5 inch diagonally
LED
TFT
60 Hz
1366 x 768
1366 x 768
16:9
3750~5000:1
200~250
7 ms
30.000 hours
176
176
200*200(mm)
This symbol indicates that the relevant electrical product or battery should not be disposed of as
general household waste in Europe. To ensure the correct waste treatment of the product and
battery, please dispose them in accordance to any applicable local laws of requirement for disposal of
electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical
and Electronic Equipment Directive)
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
EN 32
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany
The Netherlands
Belgium
France
0900-1520530
0900-23553626
02-6200115
03-81484280
(Local charges)
(Local charges + 1ct p/min)
(Local charges)
(Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial number
of your product. The serial number can be found on the back of the device. Please
write down the serial number below:
Model: LED-3901-4K
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law, which means
that in case of repairs (both during and after the warranty period) you should contact
your local dealer.
Important note: It is not possible to send products that need repairs to Lenco
directly.
any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
®All rights reserved
www.lenco.com
EN 33