File

U.S. MADE PRODUCTS
AKM247
7.62X39
AKM247C
7.62X39
AKM247T
7.62x39
M214
7.62X39
M214S
7.62X39
POLISH IMPORTS
History of I.O. Inc.
I.O. Inc. was founded in 1995. Since its inception
I.O. Inc. has offered our customers the
highest quality merchandise at unsurpassed
prices.
In early 2013, we relocated to Florida from North
Carolina. With the transition to the Space Coast,
we have been able to hire top quality engineers
and assembly personel. In order to provide the
highest quality manufacturing and service, I.O.
Inc. has invested heavily in new production and
manufacturing equipment, as well as new
training policies and procedures for both
assembly and customer service, in order
to provide the highest quality manufacturing
and service. Many members of our
manufacturing team have served our country in
the armed forces.
Our rifles go through a vigorous quality
control inspection process after assembly. Every
rifle we make is test fired with three rounds and
then checked for blemishes or imperfections by
three different technicians (two gunsmiths and
one manager).
Purchasing an I.O. Inc. rifle assures that you
are buying U.S. quality made with U.S. labor.
Our staff is committed to manufacturing high
quality firearms, as well as efficient and professional customer service.
RADOM47
7.62X39
RADOM47W
7.62X39
THANK YOU FOR
PURCHASING AN I.O. Inc. AK.
PLEASE TAKE A MOMENT TO
READ YOUR AK INSTRUCTION
AND CARE MANUAL BEFORE
USING YOUR NEW FIREARM
RADOM47FS
7.62X39
RADOM47P
7.62X39
Sincerely yours,
I.O. Inc. Management
M214NANO
7.62X39
ARCHER
PolishBeryleRifle
5.56x45
INTRODUCTION
PARTS IDENTIFICATION
The AKM247 and M214 rifles are well made, reliable and
II. Field Stripping
have several interesting features, such as hard chrome-plated
(for right handed individuals)
pistons,and can be completely taken down without tools.
Our AKM247 and M214 rifles are far superior to other AKNote: SAFETY FIRST!! Make sure the magazine and rifle
are not loaded.
type rifles and are completely made and assembled in
1. Remove the magazine from the rifle by holding the rifle
America featuring the following:
forearm with the left hand. The thumb of the right hand
US- Made polymer plastic stock
depresses the magazines catch and the right hand US- Made fire control components
rotates the magazine forward and remove it from the CNC Scope mount rail
mechanism from the bolt carrier channel. (Fig 3)
from the bolt carrier by pulling it forward. (Fig 4) 1. Bolt Carrier
7. Front Sight
receiver,
US- Made receivers and barrels
6. Removing the bolt carrier with bolt from receiver: 2. Gas Tube
8. Forearm
2. Take the rifle off safety. Rotate the safety lever US- Made plastic magazine
3. Magazine
9. Butt Stock Holding the rifle by the forward portion of the receiver 8. For the AKM247 series: Remove the forearm by rotatdownward as far as possible with the thumb of the right
US- Made bolt hold open
4. Magazine Catch
10. Safety Lever
with the left hand, and the cocking handle with the right
ing the lever of the locking pin on the right side of the
hand.
5. Trigger
11. Barrel
hand, bring the bolt carrier with bolt to the rear as far as
rear sight base, upward. Once you have aligned the
3. Pull the bolt carrier to the rear to insure that there is no
6. Rear Sight Leaf
12. Receiver Cover
possible, then move the bolt carrier forward a distance
flat surface of the pin with the rear of the gas tube (upround in the chamber.
made metal magazines designed for these rifles.
of 1 to 2mm. Lift the rear portion of the bolt carrier and
per hand guard) you can lift the gas tube (upper hand
guard) up and take it out.
9. For the M214 series: Remove the Allen screws with the
I.
General
Instructions
matching Allen wrench from the upper hand guard. UpDISASSEMBLY AND ASSEBLY
per and lower hand guard will separate then and you
The following instructions should be observed during
can set them aside. Make sure that you do not lose any
assembly and disassembly:
Unlike other AK type rifles for sale in the US, our rifles are
of the screws!! Remove the gas tube by rotating the
made with 100% American parts right here in our homeland
lever of the locking pin on the right side of the rear sight
1. SAFETY FIRST!! Before the rifle is disassembled, make
by proud Floridians. We are proud to offer you a superior
base, upward. Once you have aligned the flat surface of
sure there is no round in the chamber or magazine!!
4. Removing the receiver cover: Lean the rifle against a
product at a low price. All of our American Made products
the pin with the rear of the gas tube you can lift the gas
2. The rifle should be disassembled on a table or bench.
table and holding the forward part of the butt with the
are back by a lifetime warranty. Therefore, please be sure
tube up and take it out. (Fig. 5)
3. The parts should be laid out in order of disassembly.
right hand, depress the guide face with the thumb into
to register your firearm using the form on our website www.
remove it together with the bolt from the receiver.
4. Excessive force should not be used to remove or disthe cover hole and raise the cover with the left hand 7. Remove the bolt from bolt carrier: Take the bolt carrier
ioinc.us.
assemble parts as it may result in damage to the parts.
(Fig 2)
The use of reloaded, re-manufactured, hand-loaded or other
in the left hand with the cam surface facing upward,
5. Only accessories in good condition should be used.
2144 Franklin Dr. NE
5. Remove the recoil spring mechanism from the rifle:
non-standard ammunition may result in damage to the user
and rotate the bolt a small amount with the right hand
6. When tightening or loosening screws, hold the screw
Holding the rifle by the forward portion of the receivPalm Bay, 32905
or rifle!! The manufacturer cannot accept responsibility for
so that the guide lug leaves the wide part of the variable
driver firmly to prevent damage to the screw heads.
er with the left hand, move the recoil spring guide formalfunctions resulting from the use of non-standard and /or
Phone: (321)499-3819
groove in the bolt carrier and then move it to the rear as
ward until its rear face leaves the groove in the receiver
defective ammunition. Our rifles are delivered with IO-made
Fax: (321)499-3822
far
as
possible.
Rotating
the
bolt,
remove
its
lug
from
rear plate. Lift the guide rear face and remove the coil Poly-Carbonate magazines but also accept Warsaw Pact
the
variable
groove
of
the
bolt
carrier.
Remove
the
bolt
www.IOinc.us
III. RE-ASSEMBLY
1.
1. Attachment of the gas tube onto the barrel: Holding
the rifle by the forward portion of the receiver with the
left hand, install the gas tube on the gas block with the
right hand and depress the rear end of the gas tube as
far as possible, rotate the gas tube lock downward so
the lever lock enters the recess in the right wall of the
rear sight base.
2. Assembly of the bolt to the bolt carrier: Grasp the bolt
carrier with the left hand with the cam surface upward
and with the right hand install the bolt in the bolt carrier 5. Place the cover onto the receiver: Hold the rifle by the
2.
lug. Rotate the bolt so the guide edge enters the cam
forward portion of the receiver with the left hand and
groove in the bolt carrier and then pull the bolt forward.
with the right hand insert the cover so that its forward 3.
4.
3. Installation of the bolt carrier with bolt into the receiver:
face enters the semicircular groove in the rear sight
Hold the rifle by the forward portion of the receiver
base. Move the cover forward as far as possible and
with the left hand and with the thumb of the right hand,
press the rear portion of the cover forward and down- 5.
6.
hold the bolt in the forward position. Then insert the
ward, thus completing the installation.
7.
piston into the gas tube and insert the bolt carrier with 6. Install the magazine in the rifle: Hold the rifle by the
the bolt into the receiver, so that the guide lug of the
forearm with the left hand and rotate the rifle a little
8.
bolt carrier and the lugs of the bolt are opposite the
to the left. Insert the upward forward portion of the
notches in the guide on the receiver. Depress the rear
magazine into the opening in the receiver with the right
portion of the bolt carrier so that its guide grooves cohand so that the magazine front stop enters the notch
incide with the guides of the receiver and push the bolt
in the receiver and rotate the magazine to the rear so
carrier to the extreme forward position. (Fig. 6)
that the magazine catch is engaged by the magazine
4. Installation of the recoil spring assembly in the bolt
rear stop.
carrier: Hold the rifle by the forward portion of the re7. Release the hammer from the semiautomatic sear and
ceiver with the left hand and with the right hand insert
turn on the safety, rotating the selector lever upward.
the recoil spring assembly into the bolt carrier channel. Move the recoil spring assembly retainer forward
and placing its guide lugs opposite the grooves in the
receiver rear plate, depress the return mechanism
retainer until it enter the groove in the receiver rear
plate.
TO PREVENT MALFUNCTIONS
• Always understand the proper operation of your Safety First
firearm, and never allow the firearm to be used by anyFirearms
can
be
dangerous
and
can
cause
serious
injury
General procedure for prevention and elimination of
one who does not understand how to use the firearm
or death. Proper and safe firearms handling is the responstoppages: with proper maintenance, storage and
properly and safely.
handling the rifle is reliable in use. However, as result sibility of anyone who touches or uses a firearm. Safety has
•
Never pass a firearm to another person unless the acof carless handing, dirty parts, low-grade rounds and to be the primary consideration of anyone using a firearm.
tion is open and the firearm is in an unloaded and safe
When purchasing a firearm, you assume responsibility for
also as a result of parts wear caused by extensive
condition. Never put your finger into the trigger guard
its safe use, storage and transportation. Particularly, it is crituse, normal operation of the rifle can be affected,
until you are ready to shoot.
ical that firearms be kept from unauthorized users and this
causing stoppages during fire. The majority of stop•
When not using the firearm, ensure that it is unladed
especially
includes
children!
Your
responsibility
also
include
pages can be easily eliminated simply by cocking the
and kept away from children and other unqualified
but is not limited to, the need to protect yourself and others
rifle, i.e. by bringing the bolt carrier to the rear and
users.
from injury resulting from the misuse or abuse of a firearm.
releasing it.
•
Always
treat
firearms
as
though
they
are
loaded.
Properly prepare the rifle for firing.
SAFETY WARNING : Discharging firearms in
• Always be aware of where the muzzle is pointed.
Inspect, clean and lubricate the rifle.
poorly ventilated areas, cleaning firearms or handling
Carefully maintain the cleanliness and operation of the • Carry your firearm in a way that will preclude ac
ammunition my result in exposure to lead and other
cidental injury to yourself or others in the event bolt carrier, bolt gas channels and magazines.
substances known to cause birth defects, reproductive
ou should stumble fall or drop the firearm.
Perform timely maintenance.
harm and other serious physical injury. Have adequate
• Before shooting make certain the barrel has no Carefully inspect ammunition before firing.
ventilation at all times. Wash hands thoroughly after
obstructions.
Fire only factory loaded new, serviceable and clean
exposure.
• Do not allow a firearms or ammunition to be left ammunition.
unattended.
Disassemble and clean the rifle whenever it is dirty.
If the rifle is used in extremely cold weather for a
• Secure both the firearm and ammunition from access Store your firearm unloaded and in an area which is
secure from unauthorized access. Furthermore, store
considerable period of time, is necessary to move the
by unauthorized persons, especially children!
bolt carrier forward and rearward several times by
• When shooting, always be certain that the area beyond ammunition separately and in an area secure from
hand before loading. If a stoppage occurs whereby a
the target, including the backstop, is clear and safe. unauthorized access.
chambered round fails to fire, continue to point rifle in
Also make certain that shots fired presents no safety
a safe direction and wait approximately 30 seconds.
We specifically disclaim any responsibility for damage
hazards to yourself or others.
This is to avoid possible delayed ignition of a “hang
or injury whatsoever occurring in connection with, or
• Always use both ear and eye protection when fire” type. Immediately re-cock the rifle manually and
as a result of, the use of faulty, non-standard, “remanshooting.
continue firing. If re-cocking the rifle does not eliminate
ufactured” or hand-loaded (reloaded) ammunition.
•
Always
use
factor
loaded
ammunition
designed
for
and
the stoppage please send the warranty covered rifle
Additionally we disclaim any responsibility for damintended
to
be
used
in
the
firearm
you
are
back to the factory so that our technicians can assess
age or injury which results from any modifications or
shooting.
the problem and fix it for you. Do not interchange parts
changes not carried out by I.O. Inc !
of other rifles or try to fix severe problems by your
self since this will wave the warranty and can lead to
severe harm to you and/ or your firearm!