Here - Equipment Journal

Transcription

Here - Equipment Journal
JULY 6, 2015
ISSUE NO. 9
NEXT ISSUE:
JULY 27, 2015
TRUCKS
From Start-up
to Specialist
SEE PAGE A16
Supplying Reconditioned Work Ready Equipment Since 1976
* Sales and Rentals *
2012 CAT D6T XL
Enclosed cab c/w
A/C & heater, PAT
blade, PACCAR PA-56
winch, drawbar,
system one U/C, rear
screen, 24” SG pads,
sweeps.
CAT 345DL (2009)
250 X3 LONG FRONT
AVAILABLE FOR RENT
705-566-8190
www.bmcdowell.com
416-770-7706
See Our Page on B8
1-800-268-0182
– 5586 Hours
– Variable Gauge U/C
– 30” Pads
– 12’10” Stick
– 60” Bucket
– Auxiliary Hydraulics are
Available
– Work Ready
Call for more Information and Pricing
SEE OUR AD
ON PAGE A6
Call John or Mark at: 1-800-265-5747
or Rosaire in Timmins at: 1-705-268-3311
www.marcelequipment.com
ÉQUIPEMENT
CONDEROC
EXCAVATOR MOUNTED
SIDE GRIP VIBRATORS
Maximum
Productivity
for the front
end of your
excavator.
EQUIPMENT
FULL-DEPTH
RECLAMATION
REPAIR
ROADS
& OPEN
TRENCHES
1-877-640-2862
www.magnumattachments.com
Tiltrotators • Hydraulic Breakers • Compactors •
Multi-Quick Processors • Pulverizers • Static Pulverizers •
Shears • Screening Buckets • Sorting Grapples
1-866-867-5438 x214
ASPHALT ZIPPER
647-235-0807 • 450-745-0303
www.conderoc.com
EB BREAKER SERIES
• Skid Steer/Backhoe Loader type
• Side Plate type/Side Bracket type
www.eagleequipmentsales.ca
DL550 - Rent or Buy
RENTALS • SALES • SERVICE
LOADSTAR TRAILERS INC.
Leading in Trailing
OFTEN IMITATED, NEVER DUPLICATED
See our ad on page A9
Give Paul a call !
416-918-5442
pdingley@essltd.com
www.essltd.com
since 1946
LOADSTAR TRAILERS INC. LOWBEDS - TAG-A-LONGS TRANSPORTERS - SPECIALIZED
905-885-0744
LARGE OR SMALL LOADSTAR - PARON CAN
OFFER THEM ALL
The GTA’s Compact Equipment Specialists!
Publications Mail Agreement: 40063867
$3.95 +H.S.T.
A2
|
July 6, 2015
www.equipmentjournal.com
Letter
From The Editor
(905) 629-7500
800-667-8541 CDN/USA
FAX: 1-800-210-5799
EMAIL US:
adsales@equipmentjournal.com
WEBSITE:
www.equipmentjournal.com
Nathan Medcalf
Editor
Published every third Monday at
6-5160 Explorer Dr., Mississauga,
(Toronto). Subscription $44. per
annum or $72. for 2 years including
applicable tax., payable in advance.
Single copy $3.95. Authorized
as Publications Mail Agreement
No. 40063867, by the Post Office
Dept. Ottawa and for payment in
cash. Advertising is accepted on
the condition that in the event of
typographical error, that portion of
the advertising space occupied by
the error together with reasonable
allowance for signature will not
be charged for, but the balance of
the advertisement will be paid for
at the applicable rate. In the event
of a typographical error advertising
goods or services may not be sold.
Advertising is merely an offer to sell
and may be withdrawn at any time.
We reserve the right to reject or
refuse any or all advertising.
H.S.T. # 10403 7957 RT
Equipment Journal permission
required to reproduce original ad
layout, artwork and photos.
Pace Publishing Limited
Editor:
Nathan Medcalf
Sales:
Tara Rosen
Publisher:
John Baker
General Manager:
Mark Baker
Creative Director:
Ryan Chuhaniuk
Circulation/Subs:
Carla Hernandez
Welcome to issue #9 Wheel Loaders.
It’s rabbit season. Duck
season. Rabbit season. Duck
season. Rabbit season. Duck
season. Rabbit season. Open
house season?
Equipment Journal has been
very busy and social since last
issue. Read the coverage of
the open houses at MacLean
Engineering, Bobcat of Parry
Sound, Cooper Rentals, Tallman Truck Centre, Economy
Auction, and Cummins. And,
based on how well attended
these events were, I would
say that the three words that
bring people together isn’t “I
love you”, it’s “Bar-B-Q”. Thank
you to all those companies for
their hospitality.
We also participated in
the Canadian Association of
Equipment Dealers (CAED)Ontario branch annual golf
tournament, which raises
money t hat goes towards
efforts of promoting careers in
the heavy equipment industry
to young people. The teams
on which we played didn’t
win, but we had a lot of fun.
Congratulations to all the
winners at the event.
I came across an article
showing a very useful application of a rather mundane
technolog y. The technology—a camera and a screen.
The application—they were
mounted to an OTR (over the
road) truck and trailer. The
screen is mounted to the rear
of the trailer. The camera is
mounted to the front of the
truck.
This means that what the
camera records can be seen
by drivers behind the truck
in real time, so the driver
This Issues
behind the truck can see if it
is safe to pass, before changing
lanes, seriously decreasing
risk of road accidents related
to overtaking trucks. Brilliant.
This simple solut ion is
provided by Samsung. The
company is running a pilot
test in Argentina with these
Samsung Safety Trucks.
If you have a print story idea
or press release or video idea,
please send it to me, at:
Top Stories...
A8
editor@equipmentjournal.com
We are also available on
Twitter at EQJnews. Follow us
for the latest equipment-related news.
Work hard. Be Simply brillant. Read Equipment Journal.
1-877-625-9677
www.shawbros.ca
info@shawbros.ca
Barrie, ON
A13
Who stole my elephant?
A20
Getting the most from your fleet: pipeline
projects and idle equipment
A22
Calendar of events
B2
The Best Quality
Attachments At The Lowest
Possible Price!
Canada North Resources Expo
Farm land turns into limestone cash cow
B17
Cummins redefines road shows
B18
On the move
Equipment Journal
Digital Exclusives
Tablet App available on iOS & Android Tablets
Follow that woman: why feminine skills are
the future of leadership
Passing the torch: a new generation of
owners is approaching
Augers | Breakers | Buckets | Crushers | Grapples | Rubber Tracks
Shears | Snow | Much More!
GEARED TO MEET YOUR PRODUCTION NEEDS
NEW
POWERSCREEN 1150 MAXTRAK CONE
Direct drive, accepts clean all in feed, excellent product shape, overload protection, dust suppression,
up to 300tph (330 US tph).
POWERSCREEN XH320SR IMPACT CRUSHER
4 bar- 42” rotor, double deck 11’ x 5’ screen & recirculating (SR) conveyor, vibrating pan feeder
under crusher, magnet, diesel power, ideal for recycling, demolition and quarry.
1975
2015
YEARS
POWERSCREEN WARRIOR 1800
5’x16’ double deck screen, variable speed belt feeder, mesh, finger screens or punch plates, quick-easy
to set up. Less costly than Trommels. Ideal for topsoil, demo., sand & gravel.
POWERSCREEN CHIEFTAIN 1700
5’ x 16’ - 2 deck screen, 230 sq. ft. screening area, 14’ wide feed hopper, hyd. folding
conveyors, hyd. screen angle adjustment, fast set-up.
POWERSCREEN OF CANADA LTD.
P: (905) 576-0037 F: (905) 576-0048
800 Farewell Ave., Oshawa, ON. L1H 6N5 E: psc@powerscreencanada.com
www.powerscreencanada.com
July 6, 2015
www.equipmentjournal.com
CAWIC Celebrates 10 Years of Support & Success
On May 13, CAWIC organized an intimate gathering
at the Paramount Conference
and Event Venue in honour
of their 10-year anniversary.
They celebrated in style with a
traditional banquet hall-style
set up. Guests were treated to
cocktails and appetizers.
Michael Atkinson, President
of the Canadian Construction
Association (CCA), delivered
the keynote speech of the
evening.
“We thought it would be
kind of neat to do a bit of crystal ball gazing tonight, (talk
about) where the industry is
going, and the trends that we
are seeing,” said Atkinson.
Atkinson pointed out that
as a national association, the
CCA has had the privilege and
opportunity to go across the
country and talk to industry
practitioners in all corners and
across sectors. In doing so, the
CCA has been able to “cobble
together a bit of a road map” as
to where the industry is going.
“O ne of m y m e s s a g e s
tonight is going to be about
how important groups like
(CAWIC) are going to be, and
even more so, as the industry
continues, because of the great
need we have for people. Not
just at the trade level, not just
at the site level, but also at the
managerial and professional
levels,” said Atkinson.
According to the CC A
President, there has been a
fairly significant increase in
women in the industry, but
not right across the board. In
his opinion, the biggest need
for people is in the trades.
“We have seen growth in the
supervisor, managerial and
occupational positions with no
question. But there’s more that
could be done,” said Atkinson.
As the cocktail hour transitioned into the dinner portion of the evening, CAWIC
President Tammy Evans took
the stage to speak about the
association’s ten-year involvement in supporting women in
construction and how far the
industry has come.
Both Evans and Atkinson
had messages that echoed each
other: change needs to happen
in order for the industry to grow
and compete economically.
“We started as a small group
of 11 women, those were the
founding members of CAWIC,
and it’s now grown to over 200
members,” said Evans.
“CAWIC has grown in its
initiatives over the past 10
years. Under our core pillars
of Leadership, Mentorship,
Membership, and Partnership,
we have made great strides in
becoming a leading resource
and support for women in
the Canadian construction
industry through our various program areas and our
social media outreach, which
includes an extensive reference
link list, regular skilled trades
profiling and an industry
awareness campaign,” says
Evans.
Unfortunately, despite the
efforts of organizations like
CAWIC, the construction
industry is still viewed as a
“man’s domain” by most,
and continues to be heavily
dominated by males. While
women represent 47.3% of
the overall Canadian labour
force, they hold just 11.8% of
construction jobs.
“With respect to the construction industry, society’s
A3
|
EMPLOYMENT OPPORTUNITY
Jade Equipment Company Ltd. has an immediate opening for a
Construction Equipment Mechanic at our Branch location in
Edmonton, Alberta. This is a permanent, full time position.
250X3 LONG REACH
Skill Requirements and Job Overview
Completion of college/CEGEP/vocational or technical training
Heavy Duty Equipment Mechanic Trade Certification
Experience an asset
Command of the English Language
Attention to detail
Duties:
Repair, Overhaul, Service, and Reconditioning of Heavy
Construction Equipment including, Graders and Wheel Loaders.
This includes Drive Trains including Final Drives, Hydraulic
Transmissions, Vehicle Brake Systems, and Differentials.
The applicant must have the ability to troubleshoot and inspect
equipment to detect faults and malfunctions, determine extent of
repair required, adjust equipment and repair or replace defective
parts. The applicant must be able to test repaired equipment for
proper performance.
Cleaning, lubrication and performing other maintenance work,
servicing attachments and working tools is also required.
Security and Safety:
Criminal record check, driving record check (abstract) required
Own Tools/Equipment:
Tools, Steel-toed safety boots
Work Location Information:
In shop, On-site customer service
Salary Range:
$31.00 to $40.00 Hourly, 40.00 Hours per week, Medical
Benefits, Dental Benefits, Disability Benefits, Life Insurance
Benefits
1-800-268-0182
info@aldenequipmentinc.com
Applications can be made too:
Jade Equipment Company Ltd.
In Person between 9:00am and 5:00pm Monday-Friday
10807 209 Street
Edmonton, Alberta T5S 1Z7
By Fax:
(780) 453-1477
By E-mail:
admin@jadeequipment.com
A19
QUALITY
MACHINES
FOR RENT
LINK-BELT
With Contractors Grapple.
Also Available: Hydraulic
Shear, Breaker & Compactor.
2011 John Deere
135D Excavator
“Certified”
2011 John Deere
240D Excavator
$119,000 “Certified”
2012 John Deere
624K Wheel Loader
“Certified”
2011 John Deere
750JLT Crawler Dozer
$169,000 “Certified”
2012 John Deere
544K Wheel Loader
$179,000 “Certified”
$189,000
2011 Bandit 2680 Beast
Track Recycler
20 Nortrax Canada Locations to Serve You.
WE STAND READY.
2011 John Deere
700J XLT Crawler Dozer
$155,000 “Certified”
$486,000
2010 Komatsu
PC800LC-8 Excavator
$129,000
$459,000
A4
|
July 6, 2015
www.equipmentjournal.com
ONE FOCUS. COMPLETE SOLUTIONS.
KCMA has the experience and technology
to design, engineer, manufacture, and
service your next wheel loader. The KCM
team is focused on wheel loaders. Flexibility,
responsiveness and ease of doing business
are foundations of that commitment.
> Outstanding parts availability
> Unmatched factory component exchange
program
> Customer and dealer training programs
> Wide range of services and programs
> Serving the North American market since 1962
The commitment of KCMA Corporation to the
North American market is significant.
> 17 Models
> .78–13.5 cu. yd.
> 45 HP–720 HP
2140 Barrett Park Drive, Suite 101
Kennesaw, Georgia 30144
770-499-7000
www.kawasakiloaders.com
DEALER IMPRINT AREA
Ontario
GREAT LAKES
NEW HOLLAND INC.
Mitchell
Joe Graul
1-888-903-8772
St. Thomas
Bryan MacPherson
1-888-378-0053
www.glnh.ca
Manitoba
MAZERGROUP LTD.
1-866-576-8099
Brandon (204) 728-2244
Winnipeg (204) 253-2900
Ontario
MCDOWELL B
EQUIPMENT LTD.
Sudbury (705) 566-8190
(416) 770-7706
Quebec
MICANIC INC.
St-Augustin
De Desmaures
(418) 878-2241
Alberta
MOODY’S EQUIPMENT
Calgary (403) 295-7824
Edmonton (780) 960-8945
Saskatchewan
MOODY’S EQUIPMENT
Saskatoon (306) 934-4686
Kindersley (306) 463-2335
Lloydminster (306) 825-6141
Quebec
TOP LIFT
ENTERPRISES
St-Laurent (514) 335-2953
Sherbrooke (819) 612-5438
July 6, 2015
www.equipmentjournal.com
A5
|
McLaren Industries Expands Popular Nu-Air
Solid Cushion Tires to Include Backhoes
Backhoe owners and operators can finally experience
the unparalleled durability,
comfort and traction of McLaren’s Nu-Air solid cushion
tires—now for both front and
rear backhoe tires.
Two Nu-Air versions are
available for backhoes. The
Dirt Terrain (DT) tire excels
in off-road applications where
aggressive traction and high
stability are important. Their
deep t read lugs ensure a
solid grip on sand, rocks or
deep mud. The All Terrain
(AT) tire is a good option for
mixed-purpose vehicles. The
zigzag tread pattern provides
a smoother ride with less wear
on asphalt, concrete, and other
hard surfaces, yet still delivers
good traction when off road.
McLaren already manufactured backhoe front tires, and
their latest offerings cover the
larger rear tires. Backhoes can
now be completely fitted with
the Nu-Air series tires, which
use three layers of unique rubber compounds and multiple
shock-absorbing relief holes
to create a smooth ride and
unrivaled durability. Flat-proof
technology eliminates the
need for tire protection, while
the extra weight of the tires
lowers the backhoe’s center
of gravity and provides crucial
stability on harsh terrain.
This product integrates the
strength of a solid tire with the
smooth, cushioned ride of a
pneumatic tire. Featuring a
lower cost per hour, the solid
cushion Nu-Air tire series has
become widely known as the
economically smart alternative
to foam-filled or conventional
pneumatic tires.
“McLaren’s solid cushion
tires have become hugely
popular among owners and
operators of skid-steer loaders,
telehandlers, wheel loaders
and forklifts, so it was only
natural to add backhoe tires
in the mix,” said George Zafirov, Marketing Manager for
McLaren Industries.
www.colvoy.ca
email: sales@colvoy.ca
1.855.449.5858
1240 Colborne St. W., R.R. 4, Brantford, ON
Industrial Mowers, Boom Mowers and Mower Parts
See
Colvoy
for all your
wheel loader mowing
& brushing needs.
FOR MORE USED EQUIPMENT, VISIT
used.toromontcat.com
USED GENERATORS & PARTS
WANTED USED GEN. SETS, INDUSTRIAL AND MARINE ENGINES
Dependable Alternative Toromont Rebuilt and Used Generator Sets. If you don’t see what you
want, call me and I’ll get it for you. A transformer can be used to reduce 600 to 480 volts.
For pictures please visit: www.toromontpowersystems.com
MTU 600 KW 600 Volt
Sound Attenuated Gen Sets
$150,000
each
2014 0 hour new with base fuel tanks
CAT XQ100 Sound Attenuated Gen Set
100 KW @ 208/480/600 Volt with 14,672 hours.
CAT C32 skid mounted gen set
810 kw prime at 600 volt, 0 hour new surplus, skid
mounted, pending sale.
$15,000
PENDING
SALE
USED & RESTORED PARTS
Recent Arrivals
Engines
• IT28F arriving soon, forks and bucket
• 826C in for stripping, Carron wheels, (cab fire,
engine damage)
• D350D water tanker, complete working unit,
just arrived .................................................. $45,700
• Tri Axle 48” flat bed trailer just arrived .... $5,900
• Complete D3C,D4C,D5C, rippers, great take
offs-only 2 left
• Low hour take off 375 front end, boom, stick,
60’’ bucket, cylinders @ lines
• 235 48’’ and 85’’ buckets. Good undercarriage
• Numerours buckets, sticks, 950K new cat front
loader frame c/w cylinders
• New CAT 420 pin on front buckets, c/w bolt on
edge .........................................................$1,950 ea.
• Numerous Fusion couplers, IT couplers all new
take off’s .............................................................Call
• Numerous backhoe buckets, 420E 18’’ .$650 ea.
Final Drives and Differentials
Coming Soon ...
CAT 3512 1135 kw prime 600 volt in a 40 ft container/chassis.
Engines
• Various 3412 core engines available. Call for Pricing
Contact Pat McCart at Tel: 1 800-771-9145 or 705-436-7770, Cell: 416-522-8701
US PRICING SUBJECTED TO ACTUAL EXCHANGE RATES AT TIME OF SALE. ALL UNITS ARE SUBJECT TO PRIOR SALE.
Email: pmccart@toromont.com
• Complete 980H roll out axle groups, has 3300hrs
................................................................ $30,000 ea.
• Complete axle groups 725 articulated truck
• Rebuilt 16H differential (8D4290) ..............$24,500
• Complete 120 Grader tandem drive groups new
................................................................ $14,700 ea.
• 324 low hour, inspected, resealed p/ 267 6878
final drives c/w sprks .......................... $18,400 ea.
• Good GRTO 3412 engine from 657E scraper
.........................................................................$23,900
• Good running 3408 engine from 657E scraper
..........................................................................$16,800
• Several 3306 used industrial engines .........$4,200
• 1 3306 industrial used, 6000 hours s/n 64Z
...........................................................................$6,500
Transmissions (all rebuilt and tested)
• Rebuilt 980G transmission. (1066452) .... $19,500
• Check out our rebuilt 416 and 426 backhoe
transmissions (1920849)
• D6H Rebuilt transmission, 8E2946 ........ $15,500
• IT18F transmission (1082075).................. $10,500
• IT28G transmission (166 4467) ................ $13,500
• D6H transmission (8E2946) ..................... $15,500
• Rebuilt 966F transmission
• Rebuilt D8N torque
If we don’t stock it we
will find it for you.
PLEASE CALL SHAWN, ANDY, GREG, OR JOE AT OUR BARRIE LOCATION
Phone: 705-436-7770 or 1 800-771-9145
FOR WINNIPEG PARTS CALL
1 877-488-4343
|
Fax: 705-436-7820
A6
|
July 6, 2015
www.equipmentjournal.com
Cooper Equipment Rentals Celebrates Opening of 6th Location
Cooper Equipment Rentals hosted an open house on
June 18 at the company’s new
facility in Burlington, Ontario.
This is the company’s second
new location in the last 12
months; late last year, Cooper
Equipment Rentals purchased
Albion Equipment, based out
of Bolton, Ontario.
Sit uated on t wo acres,
the new 15,000-square-foot
facility features a showroom,
offices, a warehouse, three
ser v ice bays, and a stateof-t he-a r t f u l ly enclosed
environmental wash system.
All the water stays within
the system, and never enters
the environment. W hen a
machine gets washed, the
water is col lec ted i nto a
trough then goes into a tank
treatment system; this breaks
down oils and such, leaving
clean water for the next wash.
“The event went very well,
and we are pleased to serve
our neighbours f rom our
new state-of-the-art Burlington location,” says Pete
Rongits, Branch Manager,
Jade Equipment Company Ltd.
is pleased to announce our
new appointment as the
Easi-Pour® dealer in
Alberta and Ontario.
Cooper Equipment Rentals.
“At Cooper Equipment Rentals, we are passionate about
t he business and we love
helping people to succeed by
getting it right the first time.
As unrivaled experts in the
compact equipment rentals,
we have built a strong and
trusted network of industry
experts and partners whose
focus is to deliver the right
equipment for the right job,
every time.”
Cooper Equipment Rentals
Limited is a full service construction equipment rental company
servicing contractors in the
Greater Toronto Area (GTA). We
specialize in compact equipment
rentals and offer a broad range
of construction equipment and
supplies, backed by unparalleled
service and support.
A group photo of the staff at the Cooper Equipment Rentals Burlington location.
www.jadeequipment.com info@jadeequipment.com
10807 - 209 Street
Edmonton, Alberta T5S 1Z7
Toll Free 1-800-663-0715
Tel: 780-452-7021
47 Forest Plain Road
Orillia, Ontario L3V 6H1
Toll Free 1-866-404-5233
Tel: 705-325-2777
Several of the manufacturers that Cooper Equipment Rentals represents
attended the event, including Skyjack.
Call John or Mark at:
1-800-265-5747 or 519-686-1123
Rosaire in Timmins at: 705-268-3311
EQUIPMENT RENTALS
CALL US
FOR DETAILS
LONDON • ONTARIO • CANADA
Visit our Website for Complete Inventory Listings at: www.marcelequipment.com
Email: sales@marcelequipment.com
Ask about
our WARRANTY
Available on Most Units
CAT 966K (2011) – 3694 Hours
(3) CAT D7E (2011) - 1700-4300 Hours
P.train Warranty, AC, Ride, Coupler, GP Bkt,R.Camera .... $329,000 SU Blades, Choice of MS Ripper or Winch.................$CALL.
CRAWLER DOZERS
CAT D10T (2010) 7641 Hours, AC, U Blade w/Twin Tilt, SS Ripper, 24” Pads, Pre-Lube Starter, Block Heater ..............$795,000.
DRESSTA TD25M (2011) 1135 Hours Since New, AC, 26” Pads, SU Blade w/Tilt, Ripper, Like New .....................$298,000.
(7) CAT D8T (2005-09) 4056-9034 Hours, AC, Choice of Blade, Winch/Ripper, 24”-28” Pads ..................... from $269,000.
CAT D7E (2012) 2612 Hours, Winch, 36” Pads, A Blade w/Twin Tilt, Straight Blade is Available ...........................$359,000.
(3) CAT D7E (2011) 1700-4300 Hours, SU Blades, Choice of MS Ripper or Winch ...................................... from $352,000.
CAT D7R II (2005) 5083 Hours, AC, 24” Pads, SU Blade w/Tilt, Winch, Rear Screen, Ripper Available .................$273,000.
CAT D6T LGP (2009) 3905 Hours - 1037 Idle Hours, AC, Block Heater, 36” Pads, New Chains, S Blade w/Tilt .....$244,000.
CAT D6T LGP (2008) 6439 Hours, New U/C, New 32” Pads, AC, Diff Steer, 6 Way PAT Blade...............................$249,000.
(3) CAT D6R LGP III (2006-07) 6225 - 6776 Hours, AC, 31”- 36” Pads, Choice of Blades ........................... from $199,000.
CAT D6R XW III (2006) 7580 Hours, New U/C, NEW 30” Pads, AC, 6 Way PAT Blade, Winch Available................$214,000.
CAT D6R XL III (2006) 8825 Hours, AC, SU Blade w/Tilt, New U/C with 24” Pads, Ripper Valve ...........................$209,000.
CAT D6N LGP (2012) 3889 Hours, Powertrain Warranty, AC, 6-Way PAT Blade, NEW 33” Pads, Ripper Valve ...............$255,000.
JOHN DEERE 850K WLT (2011) 4954 Hours, AC, Hydrostatic Drive, PAT Blade, 30” Pads, Multishank Ripper.............. $242,000.
PIPELAYERS
CAT 572R-II (2007) 5840 Hours, Cab, 90,000 LB. Lift, 20 Foot Boom, 26” Pads, Drawbar ..............................................$475,000.
JOHN DEERE 750J LGP (2008) 2625 Hours, NEW Midwestern 60,000 LB Lift and 24 Foot Boom, 34” Pads.................$285,000.
(7) JOHN DEERE 700J LGP (2006-09) NEW Midwestern 40,000 LB Lifts and 24 Foot Booms ...............................from $220,000.
JOHN DEERE 550J LGP (2005) 2915 Hours, Midwestern 20,000 LB Boom Unit, 24” Pads ..................................$125,000.
CAT D5N LGP (2005) 2651 Hours, Midwestern 40,000 LB. Lift with 20 Foot Boom, 6 Way PAT Blade .................$195,000.
CAT D5G LGP (2005) 2651 Hours, Midwestern 20,000 LB. Lift with 15 Foot Boom, 26” Pads..............................$130,000.
WHEEL LOADERS
CAT 966K (2011) 3694 Hours, Powertrain Warranty, Cold Weather Arrangement, AC, Ride, Coupler, GP Bkt.......................$329,000.
CAT 966H (2009) 7796 Hours, AC, Ride, Block Heater, 26.5 x 25 Tires, 5.25 CU YD Bucket .................................$219,000.
KOMATSU WA500-6 (2011) AC, Ride Control, 6.5 CU YD Spade Nose Bucket, 29.5 x 25 L5 Tires .......................$272,000.
KOMATSU WA250-6 (2012) 3939 Hours, AC, 3 CU YD GP Bkt, Ride Control, 28L-26 Forestry Tires ....................$162,000.
VOLVO L90G (2012) 3055 Hours, AC, Ride, Coupler, 6 CU YD Bkt, Autogrease, 28L-26 Firestone Tires, Rear Camera .............$210,000.
CAT IT38H (2012) 3780 Hours - 2030 Idle Hours, P.train Warranty, NEW 20.5R25 Tires, Ride, GP Bkt, 60” Forks ...... $196,000.
HITACHI ZX350L3-5N (2012) - 4613 Hours
Aux. Hyd. Thumb, 13 Foot Stick, 52” Bkt, Coupler .. $232,000.
OFF ROAD TRUCKS
CAT 772 (2006) Delivered New in 2008, 50 Ton, Block Heater, AC, Heated Body, 21.00R33 Tires .................. $310,000.
(4) CAT 740 (2003-05) 40 Ton, AC, Diff Lock, 29.5 x 25 Tires, 2 w/Tailgates Available...........................from $189,000.
(3) VOLVO A25E (2008) AC, 23.5 x 25 Tires, Engine Pre-Heat, Volvo Reports Available ....................... from $194,000.
(2) VOLVO A30F (2011-12) 3030-4000 Hours, AC, Tailgates, Rear Cameras, Box Heaters Available......each $320,000.
CAT 725 (2007) 5643 Hours - 880 Idle Hours, AC, Block Heater, Tailgate, Box Heater, 23.5 x 25 Tires .......... $208,000.
CAT 725 (2005) 6480 Hours – 3500 Idle Hours, AC, Block Heater, 23.5 x 25 Tires, Bed Liner ....................... $182,000.
EXCAVATORS/MATERIAL HANDLERS
SENNEBOGEN 830M (2011) 7055 Hours, Material Handler, Hyd. Elevating Cab, 32’2” Boom, 24’7” Stick...............$350,000.
CAT 345DL (2009) 5886 Hours, Variable Gauge U/C, 30” Pads, 12’10” Stick, 60” Bkt, Aux. Hyds. Available............$285,000.
KOBELCO SK210-8E (2011) 2920 Hours, Coupler, 36” Bucket, Auxiliary Hydraulics, Coming In .................................... $CALL
KOMATSU PC450LC-8 (2011) 5608 Hours, AC, 36” Pads, Coupler, Autogrease, 54” Bkt, Rear View Camera..........$226,000.
KOMATSU PC300LC-7E0 (2007) 4573 Hours, AC, Coupler, 24” Bucket, 31.5” Pads, 10’6” Stick, Aux Hydraulics ...$165,000.
VOLVO EC480DL (2012) 4380 Hours, AC, Coupler, 12’10” Stick, 62” Bkt, Pattern Changer, Rear View Camera ......$265,000.
LIEBHERR 954C HD (2009) 2905 Hours, LaBounty MSD4500R Rotating Shear, 30” Pads ............................ $550,000.
CAT 336DL (2009) 5490 Hours, AC, 33.5” Pads, 42” Bucket, 10’6” Stick, Heavy Lift System ........................ $175,000.
LANDFILL COMPACTORS
CAT 836H (2007) Extremely Well Maintained, AC, Caron SU Landfill Blade, Striker Bars, Fire Suppression ...........$CALL
(2) CAT 836G (2002-05) AC, Striker Bars, Fire Suppression System, One w/Rear View Camera ............................$CALL
(2) CAT 826H (2010) Ex-Municipal Units, AC, Caron Wheels/Blade, Strikers Bars .................................................$CALL
CAT 826H (2005) Ex-Municipal Unit, Coming In .....................................................................................................$CALL
(2) CAT 826G II (2004-05) Ex-Municipal Units, AC, 1 w/Cat Plus Wheels, Reconditioned in our Shops .................$CALL
(2) CAT 826C (1991-94) Rebuilt Components, Machines Reconditioned................................................................$CALL
(4) CAT 816F (1997-04) Ex-Municipal Units, AC, Work Ready, Cat Plus & Caron Wheels ......................................$CALL
(2) CAT 816B (1993-95) 7357/7492 Hours, Ex-Municipal Units, AC, Cat Plus/Terra Twist Wheels. ........................$CALL
CAT 518 (1986) Low Hour Components, Block Heater, AC, Caron Wheels, Records are Available .........................$CALL
July 6, 2015
www.equipmentjournal.com
A7
|
0% FINANCING
FOR UP TO
70 MONTHS
PLUS NO PAYMENTS FOR 90 DAYS*
Join in on the 70th birthday celebration of today’s safest, most comfortable and hardest
working machines! Make the switch to JCB this summer to qualify for a full 70 months
of zero-interest financing on our complete line of Skid Steers, Backhoes & Telehandlers.
JCB products offer you the utmost in safety, performance and reliability with our:
• Tier 4 Final engine solution
with no DPF for ultimate efficiency
70
$
We’ve got
• Industry leading jobsite visibility,
operator comfort and safety
• Standard 2-Year Warranty
on all JCB products
Take the Bet!
that says your
next machine will be a JCB.*
Test Drive a JCB
Only at your Ontario JCB dealer
*Offer valid until August 31st, 2015 on select new models manufactured by JCB Inc. Additional terms and conditions apply. Go to jcbontario.com for offer details.
Get the details at www.jcbontario.com or contact your local JCB dealer
Advance JCB
607 Colby Drive, WATERLOO
6297 Wellington County Rd. 109 S., HARRISTON
HJ Reis International
(519) 742-5878
(519) 510-5878
Brownlee JCB
332416 Hwy 11 North, EARLTON
Church’s Equipment
3560 7th Line, INNISFIL
Doughty & Williamson (D & W) Group
D & W Group Inc. – 2137 Hwy 3 East, JARVIS
Brant Tractor – 1324 Colborne St. W., BRANTFORD
Norfolk Tractor – 3503 Hwy 3 West, SIMCOE
Red Trac Intl. – 2695 Regional Rd. #24 S., VINELAND
105-001 EJ 10.375x15.25 4C.indd 1
(705) 563-2212
2265 Hwy 31, WINCHESTER
2726 Carp Road, CARP
4229 Stewarts Glen Rd., DUNVEGAN
479 O’Brien Road, RENFREW
Hub JCB
(705) 458-0870
14795 Hwy 12, PORT PERRY
12 Golden Mile Road, LINDSAY
(519) 587-2273
(519) 449-2500
(519) 426-1090
(905) 562-4136
John’s Equipment
324 Trent Street S., FRANKFORD
(613) 774-2273
(613) 836-3033
(613) 527-1501
(613) 432-5612
(888) 387-0562
(705) 324-6136
(613) 398-6522
Miller Technology
175 Eloy Road, NORTH BAY
(705) 476-4500
Moore JCB
370 Oakdale Road, TORONTO
(416) 747-1212
Wajax JCB
359 Tartan Drive, LONDON
105 Hempstead Drive, HAMILTON
3280 Wharton Way, MISSISSAUGA
4139 Belgreen Road, GLOUCESTER
140 Magill Street, LIVELY
1830 Riverside Drive, TIMMINS
675 Beaverhall Place, THUNDER BAY
2187 Huron Church Rd., Unit 310E, WINDSOR
(519) 685-1172
(905) 383-3654
(905) 624-5611
(613) 739-2990
(705) 692-3656
(705) 267-7000
(807) 577-1111
(519) 944-8118
2015-06-09 9:31 AM
A8
|
July 6, 2015
www.equipmentjournal.com
Strong 2015 Edition Cements CNRE as the Show
for Northern Canada’s Resources Sectors
Staff and management of members of the Resources report that the 2015 edition of place biennially, was held 8,451 visitors, an increase featured 30% more outdoor
the Canada North Resources Expo Society and CNRE steer- the show was a huge success. May 29-30 at the CN Centre in over 2013 attendance num- exhibit space than the first
Ex po (CNRE), along w it h ing committee are thrilled to
The event, which takes Prince George and welcomed bers. This year’s edition also edition, showing even more
Woodland Equipment Inc., is a privately owned company that specializes
in new and used equipment sales, parts, service, and equipment rentals
with several locatons across British Columbia.
Leavitt Machinery displays a Pettibone Cary-Lift model; the company is
the new Cary-Lift representative. Read the full story on page A14.
cool
operators
can do it all
day long.
Why let heat, dust and poor air conditions ruin a perfectly good production schedule?
With factory-style aftermarket AC from Arctic Wolf™, you can count on a full day’s work no matter what the day is like outside.
If your equipment has an engine and a cab on it, we can put cool, clean air into it ... no sweat.
Call today 1-800 2 MR COOL or visit www.hammondac.com
July 6, 2015
www.equipmentjournal.com
of the forestry, heav y construction, and project infrastructure equipment needed
to get the big jobs done.
“ V i sitor s represent i ng
Northern Canada’s varied
resources sectors came out
in droves to check out the
big iron and live equipment
demos,” said Mark Cusack,
Nat iona l Show Ma nager.
“We’ve been hearing great
feedback from visitors and
exhibitors alike.”
The 2015 edition of t he
show included a wide range
of exciting features, including
the first annual Northern BC
Safet y Conference, a Live
E qu ipment Demo Z one,
Bobby & Lori Goodson, stars
of the Discovery Channel’s
h it rea lit y show “Swa mp
Loggers”, a Health, Wellness
& Safety Zone, a Future of the
Industry Day, and a pancake
breakfast in support of Big
Brothers Big Sisters Prince
George.
CNRE is produced in partnership with the Resources
Expo Society, a not-for-profit
organization whose mandate
is to facilitate training and
educational opportunities
in the central and northern
BC resources sectors. Funding from the show helps the
society achieve its objectives,
including the establishment
of a legacy scholarship and
bu r s a r y prog r a m at t he
A9
|
College of New Caledona,
the establishment of a legacy
fund with the Prince George
Community Foundation, and
support for local heavy equipment operation training programs. The Resources Expo
Society also helps organize
fun events during CNRE, such
as the pancake breakfast,
with proceeds going to local
not-for-profit organizations.
The Canada North
Resources Expo will return
in May 2017 and the show’s
management, staff and steering committee are already
discussing how to continue
growing the show with more
exhibitors, more visitors and
more equipment.
Advance Construction Equipment
Waterloo Location (519) 742-5878
www.advanceequipment.net
Harriston Location (519) 510-5878
These Waratah harvesting heads are ideal for the forestry industry.
Attendees check out this Wood-Mizer portable sawmill at the Canada
North Resources Expo, May 29-30, in Prince George, British Columbia.
LOADSTAR
2009 JCB 8080, 3000 hours, hyd. thumb, coupler,
24” tooth bucket, local trade.................... $69,500.
MUDSLIDE 20 TON DUMP TRAILER
................................................................... $35,000.
JCB 532, cab, stabilizer, forks, 7000 lb., 39”,
2 available ........................................ from $39,500.
JCB 3CX-14, cab, 4x4, extradig.
4 available .........................................from $32,500.
JCB 930, forklift, 6000 lb., 22’ triplex mast ROPS,
tires 75%, 4 wheel drive ........................... $29,500.
KOBELCO SK250, hyd.thumb, coupler, tooth bucket,
ditch bucket, root rake ......................................P.O.A.
607 Colby Drive,
Waterloo, ON N2V 1A1
TEL (519) 742-5878
FAX (519) 742-0541
RR#3, 6297 City Road 109 South
Harriston, ON N0G 1Z0
TEL (519) 510-5878
FAX (519) 510-4283
“Large or Small LOADSTAR-PARON Offers Them All”
1/2 down with 6 cheques
no interest also lease
or finance options...
“Leading In Trailing”
LOADSTAR
TRAILERS INC.
Here to Serve you Better!
75/65 TON
... OUR THANKS TO
BECKER BROS. TRUCKING,
KITCHENER, ON -95812
35 TON
... OUR THANKS TO KG REID TRENCHING,
QUINTE WEST, ON -95814
905-885-0744
50 TON HYDRAULIC
FOLDING TAIL
... OUR THANKS TO
SPG HEAVY HAULERS,
WESTON, ON -95815
www.loadstartrailers.com
E-MAIL: loadstartrailers@cogeco.ca
2655 LAKESHORE ROAD,
PORT HOPE, ON L1A 3V9
34 TON
... OUR THANKS TO
PATRIOTS EXCAVATING,
CARRYING PLACE, ON -95816
75/65
... OUR THANKS TO BECKER BROS.
TRUCKING, KITCHENER, ON -95817
34 TON
... OUR THANKS TO
KETTLBY CONTRACTING,
AURORA, ON -95818
2015 PARON 85/70, 9’6” DROPSIDE QUAD AXLE IN STOCK
-94556
A10
|
July 6, 2015
www.equipmentjournal.com
Battlefield Equipment Rentals Opens New
Location in North Bay, Ontario
45 Shepherd Road, Oakville, Ontario L6K 2G6
Broderson IC-80
• 4 Wheel Drive
• 4 Wheel Steer
• Cummins Diesel
• Rated Capacity Limiter
• Block & Ball
Battlefield Equipment Rentals is pleased to announce the
opening of a new` location in
North Bay, Ontario. The new
branch has easy access from both
Highway 17 and Highway 11.
“With the new location, we
plan to focus on customers
by continuing to improve
excellence in service and quick
responsiveness to customer
needs,” stated David White,
Marketing Manager for Battlefield Equipment Rentals.
The North Bay location marks
the 31st Battlefield Equipment
Rentals location in Ontario,
bringing the company to 39
The new Battlefield Equipment Rentals facility in North Bay, Ontario.
facilities in Ontario, Manitoba,
Newfoundland and Labrador.
The new facility marks a significant investment for the organization. It encompasses 8,500
square feet, and sits on a total
RENTALS¬SALES¬SERVICE
In Stock Now
Available for
Immediate Delivery
8016 Wellington Cty. Rd. 7, RR1,
Moorefield/Drayton, ON
Tel: 519-638-8941 | Fax: 519-638-3292
www.countryair.ca / info@countryair.ca
COMPRESSORS
BLOWER MOTORS
“Simplicity is the ultimate sophistication. ” ~ Leonardo da Vinci
Tel: (905) 844-4164
www.highreachinc.com
High Reach Inc. your authorized Broderson carry deck crane, Orion and Versa-Lift heavy fork lift truck dealer.
A/C ADD-ON UNITS
RECEIVER DRIERS
CONDENSERS
FANS
CONSTRUCTION | HEAVY TRUCK | AGRICULTURE
Trust Your Mobile Air Conditioning
Parts Specialist To Keep Cool &
Productive In Your Machine.
Call Today For Free Quote!
“Mention this ad and get FREE freight on
retail sales over $500”
of 3.5 acres. The branch itself
includes a 2,500-square foot
showroom displaying building
products, safety supplies and
consumable items. It also
includes a 6,000-square foot
warehouse with two dedicated
service bays, one wash bay, and
one bay serving as pickup/drop
off location for construction
materials and equipment.
“We’re proud to offer a full
range of machines, tools, and
more,” added White. “All of our
equipment has been regularly
serviced by our factory-trained
technicians, and has undergone
a strict maintenance schedule
to ensure reliability, operability,
and customer satisfaction.”
In addition to providing
access to a full range of construction equipment, Battlefield Equipment Rentals
also delivers essential safety
training for clients to ensure
compliance with industry regulations. The company delivers
training programs dedicated
to ensuring worker safety in,
on, or around the jobsite via
credentialed Safety Trainers.
Your Canadian DIECI Distributor
QUALITY, SAFETY, RELIABILITY
Terrebonne, QC J6Y 6W1
PBoisvert@equipementsfds.com
800-361-3346
Ontario District Manager
Dan Greer: 905-572-0111
dgreer2@mac.com
www.dieci.com
CANADA’S DIECI DEALERS
FALCON SURREY
Surrey, BC V4N 3P8
1-800-914-7819
sales@falconequip.com
Service Contact: Blair Maundrell
Parts Contact: Kelly Truman
FALCON SASKATOON
Saskatoon, SK S7K 5H4
855-955-4266
sales@falconequip.com
Service Contact: Ed Leblanc
Parts Contact: Teresa Payne
FALCON PRINCE GEORGE
Prince George, BC V2N 5S5
250-562-9267 or 800-914-7819
sales@falconequip.com
Service Contact: Ceri Siemens
Parts Contact: Trish Crouch
FALCON REGINA
Regina, SK S4N 4E8
306-352-4266 or 855-955-4266
sales@falconequip.com
Service Contact: Terry Schweitzer
Parts Contact: Teresa Payne
FALCON CALGARY
Calgary, AB T2E 6V2
403-273-5438 or 800-914-7819
sales@falconequip.com
Service Contact: Blair Maundrell
Parts Contact: Kelly Truman
FALCON WINNIPEG
Winnipeg, MB R2C 2Z2
204-663-4377 or 800-914-7819
sales@falconequip.com
Service Contact: Kevin Hughes
Parts Contact: Jose Suazo
MCGAVIN FARM EQUIPMENT
Walton, ON N0K 1Z0
877-887-6365
chrisg@ezlink.ca
PROVINCIAL LIFT TRUCK INC.
Kitchener, ON N2B 2E1
519 894 9079
cglaubitz@provincial-lift.ca
REGIONAL TRACTOR SALES LTD.
Freelton, ON L0R 1K0
905-659-1094
Covering Hamilton, Niagara,
Guelph, Burlington & Oakville area
Contact John: rtsl@bellnet.ca
GREEN TRACTOR HALTON
Milton, ON L9T 1X9
905-878-2121
Karl: karldavis@greentractors.ca
Ken: ksvendsen@greentractors.ca
GREEN TRACTOR PORT PERRY
Port Perry, ON L9L 1A6
888-818-9400
Karl: karldavis@greentractors.ca
Ken: ksvendsen@greentractors.ca
GREEN TRACTOR BRAMPTON
Brampton, ON L7A 1A7
905-846-2511
Karl: karldavis@greentractors.ca
Ken: ksvendsen@greentractors.ca
GREEN TRACTOR OMEMEE
Omemee, ON K0L 2W0
800-563-5601
Karl: karldavis@greentractors.ca
Ken: ksvendsen@greentractors.ca
GREEN TRACTOR NOBLETON
Nobleton, ON L0G 1N0
905-859-0581
Karl: karldavis@greentractors.ca
Ken: ksvendsen@greentractors.ca
GREEN TRACTORS KINGSTON
Kingston, ON K7L 4V3
877-800-3912
Karl: karldavis@greentractors.ca
Ken: ksvendsen@greentractors.ca
CONSULTANTS F. DRAPEAU INC.
St Mathieu De Beloeil, QC H7S 1P7
800-361-3346
PBoisvert@equipementsfds.com
EQUIPEMENTS DE
LEVAGE GIRARD INC
hgirard@elgirard.com
Quebec,QC
418 871 8885
ZONE KUBOTA
jgarant@zonekubota.com
Chicoutimi, QC
418 698 1188
July 6, 2015
www.equipmentjournal.com
A11
|
Phone: 1.800.268.7004 or 1.905.565.3857
Email: jjlyons@strongco.com • Mississauga Ontario
Graders
2012 VOLVO G976, 1,277 hours, joystick (11897) CALL
2008 VOLVO G976, 7,248 hours, wing (17752) CALL
Excavators
1999 VOLVO L70C 18,875 hours, bucket, coupler ,
aux hyd (41517)
$40,000
2008 VOLVO EC700CL, 5,034 hours, 11’-8” arm,
bucket (19799)
CALL
2006 VOLVO EC460BL, approx. 12,000 hours, bucket, coupler, aux. hyd. (18665)
CALL
2005 VOLVO EC360BL, 16,152 hours, no bucket,
coupler, aux. hyd. (88009)
CALL
2009 VOLVO ECR305CL 7,574 hours, bucket, coupler, aux hyd (54098)
CALL
2005 VOLVO EC160BL, 10,289 hours, bucket, coupler, aux. hyd. (42152)
CALL
2007 VOLVO G960, 8,894 hours, wing (08411) CALL
Skid Steer / Compact Track Loader
2014 VOLVO MCT135C, 96 hours, bucket, A/C, hi
flow (21599)
CALL
Paver
2008 VOLVO PF6110, 4,862 hours, Omni 318 screed
(53145)
CALL
Loaders
2013 VOLVO SD115 CAB, 580 hours, shell kit,
(29044)
$120,000
2012 VOLVO L250G, 2,722 hours, 9 yd bucket
(20217)
$325,000
2012 VOLVO L70G, 3,808 hours, coupler, aux hyd,
(76703)
CALL
2006 VOLVO EC330BL, 8,800 hours, bucket, coupler
aux. hyd. (92309)
$76,000
RECENT TRADES
2008 HYUNDAI HL740TM, 3,429 hours, 2010 LIEBHERR R914CHDSL, 2,877
CALL
bucket, coupler, aux hyd (75307) CALL hours, bucket, coupler, (14441)
2007 LINKBELT 460LX, 10,417 hours,
bucket, a/c (72407)
CALL
2012 DEERE 300D, 6,505 hours,
body heat, tailgate (21340) $215,000
2011 LEEBOY 635B, 915 hours, 6’ blade,
8’ mold board (98788)
CALL
2011 POWERSCREEN Chieftain 1700, 3,093 hours, 5’x16’ double deck.
(96078)
CALL
Ontario Branches
Phone: 1.800.268.7004 or 1.905.565.3857
Email: jjlyons@strongco.com • Mississauga Ontario
Mississauga: 905-670-5100
Ottawa: 613-836-6633
Pickering: 905-428-3808
Grimsby: 905-643-4255
Kitchener: 519-744-3518
Thunder Bay: 807-475-3052
London: 519-652-3234
Sudbury: 705-692-5801
Orillia: 705-330-0004
2009 DEERE 270DL, 4,543 hours, bucket,
(10078)
CALL
Quebec Branches
Laval: 450-686-8911
St-Augustin: 418-870-1700
Val D’Or: 819-824-2791
Chicoutimi: 418-690-1724
Baie-Comeau: 418-589-4141
Boucherville: 450-449-4666
Atlantic Branches
Moncton: 506-857-8425
Dartmouth: 902-468-5010
Mount Pearl: 709-747-4026
Western Branches
Acheson: 780-948-3515
Calgary: 403-216-1010
Fort McMurray 780-799-4272
Grand Prairie: 780-513-3700
Red Deer: 403-346-3473
A12
|
July 6, 2015
www.equipmentjournal.com
First Crossover Hydraulic Excavator Allows Governments
& Contractors to Do More Work with Fewer Machines
and Freightliner engineers.
D152 models with twowheel-drive or D154 models
with four-wheel-drive travel
easily with an automatic
transmission and over-theroad travel at highway speeds.
And on the jobsite, the chassis
can efficiently be repositioned
along the length of a ditch
or around the site from the
upperstructure cab.
Discovery Series excavators
are fully powered by a single
Cummins 6.7-litre engine with
165 gross kW (220 hp) and 520
ft-lbs of torque.
Gradall’s full-tilting, telescoping boom ef f icient ly
posit ions attachments to
achieve greater productivity
on a wider range of jobs, in
effect, allowing you to use just
one machine to do the work
of a backhoe, crane, grader,
excavator, and a host of manual labourers.
T he ent i re
boom tilts 220
degrees without sacrificing
boom power,
which is
With a compact, near-zero tail swing, Discovery Series excavators can
handle ditching and grading work with minimal traffic flow interruption.
The advanced Bosch Rexroth
Discovery Series excavators are fully powered by a single Cummins 6.7-litre
designed
hydraulic system
engine with 165 gross kW (220 hp) and 520 ft-lbs of torque.
has pressure-compensated,
a problem with boom-end the booms on mini excavators load-sensing valves with reliefs
tilt mechanisms. Authorized and backhoes, Discovery Series on all circuits. This system
attachments include grading excavators can work under supplies the right amount of
buckets, pavement removal bridges, in tunnels, under hydraulic power for the job at
bucket, excavating bucket, trees and signage, and in other hand while also conserving
fuel.
grapple, tree limb shear, and low-overhead situations.
The roomy upperstructure
mower, some using optional
With a compact, near-zero
boom-end remote hydraulics. tail swing, Discovery Series operator cab features an
The boom has two overlap- excavators can handle ditching all-electric joystick control sysping sections that telescope and grading work along two- tem that allows the operator to
out to 8.5 metres (27.8 feet), lane roads with only minimal reposition the machine without
providing more reach and traffic flow interruption. For leaving his working position
range than can be achieved full working stability, the exca- and at speeds of 11 km/h (7
with a backhoe or mini exca- vators have front axle lockout mph). An in-cab switch lets the
vator. The telescoping boom cylinders and do not require operator choose the Gradall,
movements also enhance outriggers, even when working Deere, or SAE joystick pattern.
Gradall’s traditional low-work- at either side or to the rear of The cab includes standard
comfort and convenience
ing-profile advantage. Unlike the machine.
features like heating, air conditioning, radio and a storable
front window.
The chassis cab is a standard
Freightliner M 2 day cab with
two fixed or air ride seats.
A 2,500-square-inch tinted
windshield and downward
sloping aerodynamic hood
provide a wide-open view to
the front and sides of the cab.
The ergonomically designed
interior has an automotive style
flat dash with easy-to-read
LED backlit gauges and easyto-reach controls. A host of
standard convenience features
include adjustable steering
column, electric powered door
windows, dual reading lights,
radio, and an advanced heating
and air conditioning systems.
Product support for Discovery Series models is available
from the extensive networks
of Gradall and Freightliner
distributors.
V
e
ease
A
V
e
V
C
k W
liable
re
T
T
i
C
W
k
strong
versatile
versa
tile
strong
s
Discovery Series Gradall
excavators combine the versatility benefits of Gradall’s
full-tilting, telescoping boom
with the reliable over-the-road
mobility of Freightliner truck
chassis.
Specially designed to handle
projects frequently addressed
by county and state governments, the new excavators
are adept at grading, culvert
replacement, landscaping,
mowing, vegetation control,
removal and replacement of
curbs, gutters and sidewalks,
and more.
Discovery Series Gradall
hydraulic excavators can be
driven out to one or more
jobsites without the need for
a lowboy trailer. And, once
it’s on a jobsite, the excavator remains mobile both
on and off pavement with a
two-axle chassis with a reinforced frame and
a modif ied rear
suspension, specifically designed
in collaboration
between Gradall
C
strong
POWE
ea
s
B
July 6, 2015
www.equipmentjournal.com
A13
|
5 Reasons to Track Heavy Equipment with Satellite
Remote monitoring and
operat ions ma nagement
requires technolog y t hat
delivers consistent reliable
com mu n icat ion ser v ice.
However, the actual value to
business could be compromised if the communication
system doesn’t fit with the
application.
Remote monitoring solutions that include satellite as
a communication mode provide the real-time events and
statistics on equipment usage
and location that are vital to
improving profitability. That
said, it still might be hard to
envision how a satellite or
satellite/cellular remote monitoring telematics system will
provide a favorable return on
investment. The following five
reasons will help clarify the
value of integrating satellite
communications into the
tracking of heavy equipment puts additional wear and tear
on the asset that will likely
in remote areas.
increase maintenance costs.
1.EQUIPMENT SECURITY
With satellite or dual-mode
Heavy equipment theft is communications, the central
a big problem. The National office receives engine and
Crime Information Center other equipment alerts that
recorded more than 10,000 they can follow through on
thefts of construction and with immediate adjustments.
farm equipment in 2012 in The rewards can be powerful
the US. Satellite or dual-mode by reducing catastrophic failtracking devices can solve ures and increasing uptime
this expensive dilemma by with telematics diagnostics
monitoring the location of can make this a very powerful
heavy equipment even in the reason to track remote assets
most remote areas such as with satellite technology.
mines, construction sites and
oil and gas fields. Misplaced 3.PREVENTIVE
MAINTENANCE
or stolen equipment can be
W hen t he appropr iate
retrieved using accurate and
timely position information. tracking device is in place,
equ ipment ma i ntena nce
2.ENGINE ALERTS
s c he du l i ng i s no longer
When using heavy equip- guesswork. The transmitted
ment beyond specified limits, data helps identify trends and
employee risks rise. It also provide recommendations for
action without ever having
to make site visits or calling
the asset in to a maintenance
terminal. From afar, staff
can track the performance
of heav y equ ipment a nd
receive early warnings of
developing problems before
a catastrophic failure occurs.
Data may include diagnostic
fault codes, fuel consumption, idle time, temperature
and pressure to ensure assets
are operating at peak efficiency. Remote collection of
this important data notifies
supervisors in real time. This
reduces repair costs because
problems can be resolved
before the issue gets worse
and becomes more expensive
to repair.
equipment. This can lead
to accelerated deterioration
and declining longevity of
an asset. According to IBISWorld, prices for construction machinery have risen
at an estimated annualized
rate of 3.4%. By accurately
tracking the usage of equipment – even those located in
the most remote areas – it is
easier to spread usage across
every piece of equipment.
By extending the lifetime of
assets, capital investments
can be reduced or deferred.
5.LOWER FUEL & OTHER
OPERATING COSTS
Ongoing costs ca n add
up so it is important to save
wherever possible. Continuous monitoring of equipment
4.LOWER CAPITAL COSTS
and alerts using satellite or
Sometimes, field workers dual-mode tracking devices
have “favor ite” pieces of can warn the appropriate
personnel about events like
fuel theft, excessive idling,
rough driving and other situations that take a bite out
of profitabilit y. Track ing
is also useful for collecting
overtime hours and ensuring
that billing accurately reflect
usage.
Track i ng de v ic es w it h
satellite communications
capabilities deliver all the
same benefits of its solely
cellular counterparts but
of fer increased v isibi lit y
of assets even in the most
remote regions. With the
increasing demand for richer
information in mobile and
f i xed remote mon itor i ng
applications, satellite terminals are a valuable way to
achieve a unified view of fixed
and mobile resources without
the unnecessary excess.
LOAD UP ON HIGH
PRODUCTIVITY.
Work with more power and performance from John Deere Commercial Worksite Products.
204K Compact Wheel Loader
•Interim Tier 4 emission-certified engine
•Overall height 2446-mm (8 ft.)
•Standard canopy or optional cab
•Skid-style quick coupler
•Net Power: 44 kW (59 hp) @ 2,200 rpm
•Operating Weight: 5355 kg (11,806 lb.)
•Bucket Width: 1.90 m (6 ft. 3 in.)
•Breakout Force: 4170 kg (9,190 lb.)
0% financing available!
*
e
bl
r
se
eli
a
ERFUL
e
til
s
r
i
rsa
B
G
ve
W
H
V
GreenTractors.ca
HuronTractor.com
McLarenEquipment.com
PremierEquipment.ca
GreenTech.ca
vers
atile
HutchinsonFarmSupply.com
For more information, stop by your nearest Ontario John Deere dealer or visit online.
*Financing valid through July 30, 2015 and is subject to John Deere Financial approval. For personal or commercial use. Minimum finance amount may be required. See your dealer for
complete details and other financing options. Program subject to change, without notice, at any time. Additional fees may be required.
A14
|
July 6, 2015
www.equipmentjournal.com
Leavitt Machinery Named Dealer
for Pettibone/Traverse Lift, LLC
70
$
We’ve got
that
says your next Skid Steer,
Backhoe or Telehandler
will be a JCB.*
We’re so sure you’ll love our equipment, we’ll give you $70 if we’re
wrong! Register now to TEST DRIVE select JCB machines with
your Ontario JCB dealer and see why it’s time to switch to the safest,
most comfortable and hardest working machines on the market.
Go to www.jcbontario.com
for offer details.
*Offer valid until August 31st, 2015 on select new
models manufactured by JCB Inc. Additional terms
and conditions apply.
105-001 EquipJournal Quarter pg AD R1.indd 1
Pettibone/Traverse Lift,
LLC announces the addition
of Leavitt Machinery to its
dealer network for all material
handling product lines. Leavitt
will carry Pettibone equipment
at its locations in the provinces
of Saskatchewan, Alberta, and
British Columbia, and in the
state of Washington.
“We are excited to welcome
Leavitt Machinery to the Pettibone family,” said Scot Jenkins,
President of the Pettibone
Heavy Equipment Group.
“Leavitt has a tremendous
reputation for providing premium equipment solutions to
the material handling industry,
making them a perfect match
with Pettibone’s long-standing
commitment to quality. We
look forward to a long and
productive partnership.”
L e a v i t t M a c h i n e r y ’s
full-service branches provide
cost-effective new and used
equipment sales, emergency
repairs and planned maintenance, long- and short-term
equipment rentals, operator
safety training, and extensive
parts support. The company’s primary emphasis with
Pettibone will be promoting
the Cary-Lift product line for
pipe handling in oil and gas
applications, as well as for
tire handling in mines and
quarries. The company will
also carry Pettibone’s Extendo
and Traverse telehandler lines
for the construction market,
and the Speed Swing loader
for railway maintenance.
“We take pride in delivering
a wide variety of material handling equipment options to our
and innovative machines are a
great complement to our existing product lines. We expect
to achieve great success with
“Leavitt has a tremendous reputation for providing
premium equipment solutions to the material handling
industry, making them a perfect match with Pettibone’s
long-standing commitment to quality. We look forward
to a long and productive partnership.”
diverse array of customers,” their equipment, particularly
said John Mutis, Senior Vice in demanding load handling
President of Sales for Leavitt applications.”
Machinery. “Pettibone’s rugged
The Pettibone Cary-Lift product line will now be available in Canada’s western
provinces and Washington State through Leavitt Machinery.
2015-05-14 10:05 AM
Canada: Shaun Brown
Cell: 613-532-4823
Office: 613-542-1500
Email: Shaun_brown@tramac.com
SERVING THE CONSTRUCTION, DEMOLITION & MINING INDUSTRIES FOR OVER 49 YEARS
EXCAVATOR MOUNTED ROCK DRILLS FEATURING
THE WORLD FAMOUS MONTABERT DRIFTER
Hole d
iam
ranging eter
from
2” to 7
”
ur
Turn yo to a
r
to in
Excava ated
dedic
rill
track d
Remote
controlled
from the cab!
Fast Reliable Drilling With The Ability To Drill Sideways, Overhead, Down Slopes etc.
Call Our Ontario Office: 613-542-1500
28 Steve Fonyo Dr., Kingston, ON K7M 8N9
Call Our Quebec Office: 888-663-8122
3421 Industriel Boulevard, Laval, Que. H7L 4S3
YOUR HYDRAULIC ATTACHMENT EXPERTS
July 6, 2015
www.equipmentjournal.com
A15
|
DIESEL TRUCK PARTS INC.
Terex 7251B
1998 John Deere 744H
Cat 416
2002 Case 580 Super M
1986 Champion 740A
Terex 7231
Quick attachment
1994 John Deere 644G 19,311 hours,
needs engine, s/n DW644GB44340
2003 Case 1650
(2) 2004 JCB 212
2002 John Deere 744H
2006 Hyundai HL770XD-7
2003 Komatsu WA380-5L
2008 Marathon Generator s/n
1989 John Deere 644E 26,621 hours, Clark Loaders 1700/1900/2000
s/n DW7441 666040
s/n C4281
s/n ON0110302
s/n 4ZN05731, for parts.
s/n A52038
s/n JJG0282501
s/n 740-127-218-17239-86
s/n SLP212AS4E0947378, JCB2CX12V60975304 s/n JD744HX580607
WA5643980308
JD recon engine, s/n DW644EB523856
NEW WEBSITE!
6 way blade, s/n 1B500753
CAT Generator 3 phase, 375 kVA, 600
View more inventory
at our new website
www.morgansdiesel.com
Volt, s/n 62B10203
2006 Liebherr 904
Case CX225SR
2008 Kobelco Excavator
2000 Kobelco SK210LC
Mitsubishi BD2F
s/n WLHZ0441K2K027586.
s/n DAC251387
1993 Hitachi LX200
2014 JLG G10-55A
2001 JCB 160 NL
2008 Volvo EC210CL
Cat 314 CCR
2002 Cat 320CL
1996 Hitachi EX270LC
2000 Case 9050B
1975 Gradall 6660M
1987 Grove 8440G TMS-300
s/n SLPJS103YE0702792
s/n ANB01237
s/n YL04U0322
s/n YC0740352
2013 Brandon Dump Box
1999 Mack RD 427, Fuller trans., 8LL, 20 Dynapac LP 850P
Also 20’ Beau-roc Dumpbox
front, 20,000 pusher, 46 rears, engine rebuilt.
LOADERS for parts
Cat 980 s/n 89P1207
(2) Fiatallis 645B s/n 16604163, 16604806
2006 Hyundai HL770XD-7, s/n ON0110302
2007 Hyundai HL770 XTD s/n LB0110502.
1997 JCB Loader w bucket s/n SLP42600VE0531350.
John Deere – 544-A, new engine
1986 John Deere 644D
2002 John Deere 744H
2005 John Deere 755
2003 Komatsu WA380-5L
Volvo L150E
FORESTRY for parts
1998 John Deere 653 Feller Buncher
AGGRICULTURAL for parts
1995 Case 4230
Challenger
7040 Massey
2010 Case IH 8120
Combine
1248 MCADOO’S LANE, R.R. #1
GLENBURNIE (KINGSTON), ON,
CANADA K0H 1S0
RUBBER TIRED BACKHOES
for parts
2002 Case 580 Super M s/n JJG0282501
Cat 416 s/n 4ZN05731, for parts.
1986 JCB 1400B, fire damaged
1988 JCB 1400B Sitemaster
1999 JCB 212S
(2) 2004 JCB 212
John Deere 310SJ for parts
2000 John Deere 410
1993 Hitachi LX200
DOZERS for parts
2003 Case 1650
Cat D7
Cat 955 s/n 30A14CIT
Cat 977 20 series
Drott TD6 6K3 s/n # 4640
International TD15B s/n 26058
1988 John Deere 750B, long track, s/n
T0750BH749137
s/n VCEC210CE00110257.
s/n KJA00198, feller buncher
s/n S27005DL
s/n G-564-66H
EXCAVATORS for parts
American 35 s/n 35164
Case 220B s/n 0220059674529.
2007 Case CX225SR s/n DAC251387
2000 Case 9050B
Cat 212 s/n 5DC00038
Cat 235B s/n 9PC00448
2006 Cat 314 CCR s/n KJA00198,
with feller buncher
2002 Cat 320CL s/n ANB01237
1995 Cat 320
1994 Hitachi EX200LC-3 s/n 14C79883
1996 Hitachi EX270LC
Hyundai 130LC-3
2006 JCB 8052
2008 John Deere 200D
Fire damage in cab, s/n 0160060128
MISCELLANEOUS parts
1985 John Deere 792
JSW BH80E
2008 Kobelco ED195 s/n YL04U0322
2000 Kobelco SK210LC s/n
YC0740352
Koehring 466 s/n C16349
Liebherr R 932 HDSL. s/n 1920808
2006 Liebherr 904 s/n WLHZ0441K2K027586.
Liebherr 961 s/n L1961RLL
Linkbelt L3400 s/n LS3400621
2004 Volvo EW17O Rubber Tired
2008 Volvo EC210CL s/n VCEC210CE00110257.
www.morgansdiesel.com
james@morgan-diesel.com
2012 JCB 510-56
s/n JCB5CGXGL01403282
Ford F550 Tow Truck
Sand Spreader box
1994 Gomaco GT3600
Curb & Gutter machine
2003 JCB Fastrac
Manitowoc Twin Disc
Hydraulic Torque Convertor
Gear Box
Model CF10059TC11, Spec.
95088, s/n #90779
1999 Sterling 9513
42” Esco Bucket
Timberjack Clark Transmission
Model # 1275360-1, s/n # 73357
W30 Case Bucket
Howse Rototiller 72”
Culverts 2-3’ diameters, black
plastic
Everest snow plow equipment
Dump Boxes
Can American Soil-King Stonespreader
(2) 2004 JCB 212
s/n SLP212AS4E0947378,
JCB2CX12V60975304
On parle Français içi.
Demandez pour Darlene
Call James 1-800-267-0633
(613) 546-0431 Fax: (613) 546-4206
We ship parts anywhere F.O.B Kingston, ON
We also buy salvaged equipment.
WE ACCEPT CASH & BANK DRAFT - NON CASH PURCHASE SUBJECT TO 3% INCREASE
BUSINESS HRS.
Mon. to Fri. 8 a.m. to 5 p.m.
Closed Saturday & Sunday
A16
|
July 6, 2015
www.equipmentjournal.com
From Start-up to Specialist
When safety and performance are
critical, choose VBL™ locking,
sectional,
forged,
heat-treated
CARBIT™ system.
-Easy handling segments
-Locks for rigidity
-TCM™ carbide embedding for increased wear life
-Available with a variety of 7/8” (22mm) bits OR our
exclusive, stronger, easier to remove TAPERLOCK™
tools.
Waterloo, ON.
1-800-461-1824
sales@valleyblades.com
W W W. VA L L E Y B L A D E S . C O M
Introducing:
CARBITLINK™
&
TAPERLOCK™
Edmonton, AB.
1-877-452-1430
When it comes to the jobs
no one wants to take, Sean
Turpin, President of Rysen
Bobcat Services, isn’t afraid of
a challenge. That’s because he’s
confident his guys, equipped
w it h Hitach i excavators,
will get the job done. Rysen
started business in late 1999
with one skid steer. Fifteen
years later, Turpin has grown
the St. Albert, Alberta-based
company, which specializes
in earthworks and grading,
to more than 30 employees.
He’s also transformed into
a Hitachi fan along the way.
“I chose Hitachi after I talked
with some of my friends in the
industry, and they said Hitachi is the way to go,” he said.
“The excavators are reliable,
smooth, and just awesome.”
Rysen now has a fleet of five
ZX210LC-5 Excavators ready
to tackle a variety of jobs. And
there’s been no buyer’s remorse
for Turpin when it comes to his
Hitachi fleet.
“The guys at Wajax, my Hitachi dealer, can break down the
cost per hour of what it takes
for me to run a unit,” he said.
“And it’s unbelievable how
low the cost is. The numbers
say it all.”
With 30 years of operator
experience, Rysen employee
Derrick Brooks, or “Brooksie”
as the guys call him, also
encouraged Turpin to purchase Hitachi excavators.
“I’ve operated every brand
of excavator,” Brooksie said.
“Hitachi is quick and powerful;
the 210 has all the power I need.
BUYING AND SELLING USED CONSTRUCTION EQUIPMENT SINCE 1971
One of the company’s long-term undertakings is working on the Anthony
Henday Drive expansion, which includes over 40 kilometres (25 miles) of
new highway and 47 bridge structures.
It’s really comfortable, which
makes operators happy and
more productive.”
And Turpin makes sure he’s
got the right guys in the cab
by turning to veterans, like
Brooksie, to help train new
operators.
“We really pride ourselves on
training the next generation,”
Turpin said. “A lot of our operators are under 30. Brooksie
PUTTING HITACHI TO WORK
A rmed w it h its f leet of
Z X 210 L C - 5 E x c a v a t o r s ,
Rysen doesn’t flinch at any
job, whether it’s short-term,
long-term, or challenging.
“We take a lot of the hard
jobs that no one wants to do,”
Turpin said. “These are jobs
other companies shy away
from; the tedious stuff—it’s
our forte. No matter the con-
“I chose Hitachi after I talked with some of my friends
in the industry, and they said Hitachi is the way to go.”
really invests time in training
young operators. When it comes
to getting the job done, we want
the experience and know-how
on our side.”
ditions, my guys don’t miss
a beat. And Hitachi keeps us
running. If Rysen is there,
Rysen will do the work.”
O ne of t he c ompa ny ’s
450-437-8848
hardingequipment@sympatico.ca
FAX: 450-430-5352
1998 PETERBILT 357, 46,000 miles,
2002 WESTERN STAR 6964 SX “CON- 1987 FORD F-700, 4x4, GM Diesel.
2001 FREIGHTLINER FL-80, CAT
1983 WESTERN STAR, 6x6, Cummins
6000 hrs., 10 ft wide, 23 front - 46
STELLATION”, heavy-heavy spec-CAT
$15,500. 3126B 250 HP, auto. transmission, 16- 270 HP, 18-46 axles, good condition!
rears, Cat power.
$23,500. 475 triple frame, 70000 rears. $55,000.
40 axles, 3000 gallon tank.
$57,500.
$37,500.
1983 PAYSTAR 5000, 4x4, Cummins
1981 DYNAPAC CC10, 48” drum,
LINDIG SOIL SHREDDER, electric
GIANT ROME DISC, 15 ft. wide, 28”
2000 FREIGHTLINER FL-80 C/W
diesel.
$4,500. power 550 V., has hammer mill. $17,500. disc.
$17,500.
Bearcat 1700 US gal tank, fuel + water 270, auto trans, front harness - clean.
$19,500.
tank - CAT diesel, very clean!
P.O.A.
1987 CAT PS-130, 7-wheel pneumatic 1995 CAT CB-634 ASPHALT ROLL2000 I-R DD24 VIBRATING ROLLER, 2004 DYNAPAC CC 622HF ASPHALT 1989 DYNAPAC CP21, 7-wheel pneuroller, Perkins diesel.
$9,500. ER, plastic tanks, Cat diesel, 84” drum. 2900 hrs., water system, 48” drum.
ROLLER, 66” drum, 3,500 hours.
matic roller.
$12,500.
$14,500.
$9,500.
$22,000.
1992 BARBER-GREENE 260B, John
2002 TEREX CR551 ASPHALT PAV1999 BARBER-GREENE MODEL
VOGELE 1110 RT, 10-20 ft screed,
Deere Diesel, 10-20 ft screed. $19,500. ER, Cummins, 10-20 ft screed.
BG-24556, C/W 6 cylinder turbo diesel, Cummins, 6900 hours, Original paint.
$23,500. 10-20B screed.
P.O.A. P.O.A.
2003 CAT AP-1055B, C/W 10-20B
screed, 4300 hours, CAT diesel, Original paint.
P.O.A.
July 6, 2015
www.equipmentjournal.com
A17
|
subcontractors required daily; keeps his vision for the comhis dad, Bernie, fueling and pany focused on what it does
assisting with maintenance; best—earthwork and grading.
and his uncle, Gerard, the
“I don’t want to be a jack-ofmaintenance and ser v ice all-trades,” he said. “I want to
go-to guy. Turpin’s family has be the go-to guy when somegrown as well. He and his wife, one needs excavating and
Kimberley, are proud parents earthwork. Rysen specializes
of two girls and recently a baby in that, and Hitachi specialboy. The youngsters will be izes in excavators; that’s why
helping “Dad” once the time they’re a good match for us.”
is right, keeping Rysen Bobcat
Rysen Bobcat Services Ltd.
in the family for years to come. is serviced by Wajax EquipA GOOD MATCH
Turpin still prefers working ment, Edmonton, Alberta.
In addition to running the with customers directly and
company, Turpin enjoys being
out in the field and getting
firsthand experience with his
AUTHORIZED
excavators.
DISTRIBUTOR
“I’m in the field a lot,” he said.
“With the Hitachi excavators,
loading, digging, everything
about them is better. They just
keep running—working on
CONSTRUCTION EQUIPMENT RENTAL
jobs day after day.”
Even though the company
DOZERS - LOADERS - BACKHOES - ROLLERS
has grown, Rysen has kept its
CUSTOMER SERVICE
small business feel. Since its
incorporation in 2003, Turpin
TARTEN EQUIPMENT LIMITED
has brought the people on
6199 Shawson Drive Mississauga, ON L5T 1E5
board who want what’s best for
him and his company. Those
Phone: 905 670 1704
Fax: 905 670 4790
people include his mom, Joan,
Toll Free: 1 888 670 1704
WWW.TARTEN.COM
managing all aspects of the
office as well as dispatching
COMMITTED TO SERVICE EXCELLENCE SINCE 1976
t he f leet of tandems and
To keep his jobs on track,
Turpin knows Wajax Equipment, his Hitachi dealer, is
just a phone call away.
“I don’t need a mechanic
because I have Wajax,” he
said. “The other day I had a
leak, and I gave Wajax a call.
They sent someone out to help
and had me up and running
within an hour. They really
take care of us.”
For short-term jobs, the Hitachi excavators’ mobility and versatility allow Rysen to be nimble with its operations.
long-term undertakings is
working on the Anthony Henday Drive expansion, which
includes over 40 kilometres
(25 miles) of new highway
and 47 bridge st r uct ures
(estimated to be completed
in late 2016). The company
has been supplying excavators
and other equipment to various road-building companies
around Alberta since 2009.
And Rysen’s excavators have
been busy.
“We have at least four 210’s
work ing ever y day—from
working with underground
utilities and fiber optics, grade
beam construction, ditch sloping and shaping to just loading
our fleet of tandems. We can
keep our Hitachis busy, rain
or shine,” Turpin said.
For short-term jobs, the
Hitachi excavators’ mobility
and versatility allow Rysen to
be nimble with its operations.
“We can put the 210s on a
trailer, complete a job, load
them up at the end of the day
and be on to the next thing,”
Turpin said. “It definitely gives
us an advantage.”
Authorized exclusive dealer for
647-235-0807
450-745-0303
info@conderoc.com
CRUSHING
SCREENING
MINING
QUARRYING
PAVING
RECYCLING EQUIPMENT
www.conderoc.com
A18
|
July 6, 2015
$149,000
2007 JD 844J
13811 HRS 29.5R25YOK55%,
RBIT ARTIC,SPAR
$95,000
2003 JD 824J
17754 HRS HYD FR DIFF LOCK,
29.5X25 TIRES,RC,BCKT W TEETH
$255,000
2013 JD 644K
3503 HRS 4.25YD GP BKT,REV
FAN,100AMP
www.equipmentjournal.com
$170,000
2013 JD 544K
1833 HRS 4WD LOADER
$120,000
2005 JD 624J
4355 HRS PIN ON BKT, RC, AC,
HEAT
$145,000
2009 JD 544K
3931 HRS CAB,AC,CLOTH SEAT
AIR SUSP,ZBAR LINKAGE
2007 CAT 140H TALL CAB, BAREBACK 7827 HRS
$145,000
2008 CAT 140M SNOW WING 8510 HRS
$178,000
2009 CAT 140M LOW CAB, RIPPER 5707 HRS
$189,000
2008 CAT 140M AWD 1 WAY PLOW,WING,X MUNIPAL 7554 HRS
$185,000
2003 CAT 160H CAB, AC, WING 12400 HRS
$115,000
2008 CAT 160M BAREBACK, FENDERS 5860 HRS
$189,000
2008 CAT 160M BAREBACK, AIR RIDE,DIFF LOCK 7804 HRS
$169,000
1986 CHAMP 740 CAB & HEATER 6994 HRS
$35,000
2002 JD 770CH TALL CAB,AC,S.WING,14'MD,2'EX 7989 HRS
$80,000
2002 JD 770CH TALL CAB, 2' EXTENSION 10165 HRS
$75,000
2006 JD 770D TALL CAB,14'MLDBD,2'EXT,S WG 13259 HRS
$95,000
2007 JD 770D LOW CAB, BAREBACK 9617 HRS
$120,000
2010 JD 770G 2FT EXT,SNOPLUS TIRES,BAREBACK 4305 HRS
$178,000
2010 JD 770G LOW CAB, BAREBACK 6260 HRS
$189,000
2010 JD 770G LOW CAB, BAREBACK 6875 HRS
$189,000
2011 JD 770G GOOD CONDITION,RUNS GOOD 4645 HRS
$195,000
2011 JD 770G BAREBACK, STANDARD CONTROLS 4773 HRS
$179,000
2011 JD 770G MOTOR GRADER 4922 HRS
$205,000
2011 JD 770G C/W LOW CAB,BARE BACK,WTY 5015 HRS
$199,000
2011 JD 770G LOW CAB, BAREBACK, STD CTRLS 2602 HRS
$179,000
2010 JD 770GP GP,BAREBACK,14'+2'EXT,F/R FDR 5348 HRS
$199,000
2007 JD 772D SNOW WING 12950 HRS
$85,000
2008 JD 772D C/W SNO PLUS,SNOW WING,BAREBACK 11953 HRS
$89,000
2009 JD 772D BAREBACK, S.WING,BALANCE WTY 6176 HRS
$185,000
2009 JD 772G LOW CAN W/ RIPPER 4741 HRS
$245,000
2010 JD 772G 6WD, AUTOSHIFT 4976 HRS
$245,000
2011 JD 772G BES WING 6167 HRS
$228,000
2007 JD 870D T CAB,16' MDBD,SLIP CLUTCH,REBLT TRANS 7058 HRS $130,000
$103,000
2010 JD 624K
12161 HRS TL CRRIER,AC,HIVIS
QC,RVRS FAN;F&R FNDRS,RC
$115,000
2009 JD 444K
5928 HRS 20.5R 25
TIRES,FENDERS,PIN ON
$185,000
2012 JD 624K
4876 HRS QA,BKT,3F
$120,000
2009 JD 444K
4494 HRS 20.5R 25
TIRES,FENDERS,PIN ON
$190,000
2012 JD 624K
1944 HRS ZBAR,3.5 YD PIN-ON,
2 FUNC
$195,000
2010 JD 744K
5250 HRS CAB,AIR,GP BKT W/
EDGE
2008 JD 870D LOW CAB, S.WING, FENDERS 8174 HRS
$139,000
2008 JD 870D L.CAB,S WING,PUSHBLOCK 7487 HRS
$139,000
2008 JD 870D LOW CAB, CRAIG WING 7199 HRS
$139,000
2008 JD 870D SHORT CAB,F&R FDRS,14" MLDBRD 2' EXT 7446 HRS
$139,000
2009 JD 870G B.BACK, 2' EXT, F&R FENDERS 7108 HRS
$215,000
2010 JD 870G B.BACK,LW CB,HT/AC,TP BT RR WPR,F&R FNDRS 5201 HRS $189,000
2010 JD 870G WING,SNO TIRES,BLADE IMPACT 7588 HRS
$189,000
2010 JD 870G C/W MASTLESS WING, RIPPER 8355 HRS
$180,000
2010 JD 870GP LOW CAB, BAREBACK, PTH WTY 5852 HRS
$199,000
2011 JD 870GP GP, RIPPER 4596 HRS
$239,000
2013 JD 870GP BAREBACK, 2' EXT, PTH WTY 2470 HRS
$289,000
2006 JD 872D C/W RIPPER & PUSHBLOCK 9067 HRS
$180,000
2007 JD 872D CLEAN,RIPPER,WING.LIFT GROUP 9935 HRS
$130,000
2009 JD 872G LOW CAB, RIPPER,14+2 MLDBRD, 7585 HRS
$209,000
2010 JD 872G 2 FT EXT,F FNDRS,NW SNO+ ALL AROUND 5800 HRS
$215,000
2010 JD 872G 7+7 CTRL VLV,AUTO SHIFT TRANS 6593 HRS
$225,000
2009 JD 872GP TIRES 50% 5152 HRS
$275,000
2010 JD 872GP C/W WING,HYD ANGLE BLADE,V-PL 6053 HRS
$239,000
2008 VOLVO G940 BAREBACK, 2' EXT, LOW CAB 6900 HRS
$105,000
2010 VOLVO G960 SNOW WING 4551 HRS
$142,000
2011 VOLVO G960 BAREBACK 3880 HRS
$155,000
2011 VOLVO G960 S.WING, 2' EXT, FENDERS 4433 HRS
$149,000
2011 VOLVO G960 BAREBACK 3800 HRS
$155,000
2011 VOLVO G960 LOW CAB, 2 FT EXT, FENDERS 4291 HRS
$149,000
2012 VOLVO G960B C/W WELDCO MASTED WING,17.5 3832 HRS
$169,000
2012 VOLVO G960B 14'+2', 17.5R25,11 SPD TRANS 5072 HRS
$159,000
Call Brandt Finance at 1-855-711-4545 to find out more about our customized, flexible financing options.
Used Equipment Clearance
1-888-227-2638 | sales@brandt.ca | www.brandtused.ca
www.equipmentjournal.com
A3
Women in Construction Celebrate 10 Years
perception of construction
as being only for men, and
that women are too weak or
fragile to work in construction,
or that it is too dangerous, too
dirty, and inappropriate for
women… starts with the parents, infiltrates the educational
system, and continues on the
jobsite with an unwelcoming
environment for women to
advance. We are working to
change this social perception,”
says Evans.
CAWIC has proven to have
strong and dedicated members. They enjoy great community support for their goal
of increasing the number of
female leaders in the skilled
trades. Having made their mark
in the industry over the past
ten years and with no signs of
slowing down, Evans has high
hopes for the next 10 years and
beyond.
R e c e n t l y , C AW I C w a s
awarded a federal grant in the
amount of $249,900 through
Status of Women Canada to
put towards their latest initiative, the Level Best Women’s
Advancement Project. This is
a 36 month national research
and action plan project with
the intention of increasing the
number of women entering
the industry, prolonging their
careers, and boosting female
promotion into leadership roles.
Membership in CAWIC is
available to any individual
female, any corporate entity
that supports women in construction, female students,
and individuals not in the
construction industry, but
whose activities indirectly
support the goals and objectives of CAWIC.
The Canadian Association
for Women in Construction
(CAW IC) was founded in
1982 as the Toronto chapter
of the U.S.-based National
Association for Women in
Construction (NAWIC). In
2005, CAWIC parted ways with
NAWIC to pursue an independent Canadian association.
Fast forward 10 years and what
started as a few women, eleven
to be exact, has flourished into
a full-fledged organization
with over 200 members.
July 6, 2015
|
A19
CREIGHTON ROCK DRILL LTD.
You already know we sell
teeth but what about the
rest of your bucket ...
PROTECT YOUR
INVESTMENT
TUFFSTUDDS are chromium carbide-laden
wear-resistant alloy studs
Features and benefits of
TUFFSTUDDS wear protection
• 100% Cast Chromium Carbide
The Canadian Association of Women in Construction (CAWIC) grew from
just 11 founding members to more than 200 members today.
• Up to 70% dead bed effect
• Lightweight
– 6.5 lbs/ft2 (30.0kg/mtr2)
• 50-60 Rc Hardness
– Excellent wear
• Reduces Dead Weight
– increased payload
• Stud Welded Installation
2222 Drew Road, Mississauga ON L5S 1B1 (905) 673-8200
Washago
Sudbury
Ottawa
Boisbriand
Mt. Uniacke
(705) 345-4900 (705) 910-0123 (613) 831-7278 (450) 435-2555 (902) 431-7625
Canadian Construction Association (CCA) President Michael Atkinson.
WWW.CREIGHTONROCK.COM
START IT UP.
YOU CAN ALMOST HEAR YOUR
BUSINESS PURR.
You want an engine that has a reputation for doing everything
right so your product can do what it’s designed to do. In other
words, you want a Kubota.
THE ENGINE OF SUCCESS
Learn more at KubotaEngine.com/Success
A20
|
July 6, 2015
www.equipmentjournal.com
Getting The Most From Your Fleet: Pipeline Projects & Idle Equipment
By: Sue McGregor,
Managing Director of
Canada, IronPlanet
Experienced fleet managers
know it makes sense to create
and hold a stable supply of
core equipment that can be
regularly used across different kinds of projects. Some
machines, including dozers,
excavators, wheel loaders,
skid steers, and trucks, are
multipurpose and can be used
across a variety of projects.
However, not every piece of
equipment should be part of
your core fleet. Evaluate the
size and mix of your fleet so
that specialized pieces and
infrequently-used equipment
don’t sit idle for long periods
of time, costing precious time
and money to maintain while
they’re not generating revenue
on your behalf.
If your business project
pipeline doesn’t include a use
for specialized machines in
the near future, why not sell
them as surplus and turn idle
equipment into cash that can
be used for business purposes
now? If it’s needed later, equipment can always be rented or
purchased used at auction.
Equipment ow ners of ten
tend to hold on to equipment
too long and miss the best
window to dispose of their
assets, which reduces resale
value and adds maintenance
expense. Regularly review
your inventory with a critical 2.REDUCE MAINTENANCE
eye. Now may be the right time
COSTS
to sell, and here’s why:
No one needs an unexpected
breakdown mid-project. Fleets
1.OPTIMIZE EXPENSIVE
in great working condition are
STORAGE SPACE
critical for your business, and
Storage is expensive and focusing maintenance dollars
can be limited, and ensuring on your core equipment saves
your equipment is stored in you time and money. Keeping
the right environment helps iron you can’t afford to regukeep it in top-notch condition, larly maintain will reduce its
as well as safe from vandal- resale value; sell equipment
ism and theft. Specialized you’re not expecting to use
equipment, in particular, soon, and avoid incurring
can sometimes require more maintenance expenses on
complex storage. Store only machines sitting in storage.
what you know you’ll be using Use equipment’s major repair
regularly and often; don’t lifecycles to help you deterpay to store equipment that mine the most efficient timing
doesn’t actively contribute on disposal, too.
to profits for your business.
1-800-461-9823
www.uerentals.ca
Dexter Wheeler at 705-266-0327
dwheeler@unitedsupply.ca
Paul Woodward at 705-365-8582
pwoodward@bucketshop.on.ca
2031 Riverside Drive
Timmins, ON P4R 0A3
3.FREE UP FUNDS FOR THE
BUSINESS
One smart way to increase
cash and decrease business
risk is to sell surplus equipment at auction. Use the proceeds to benefit your business
now by strengthening this
season’s balance sheet or
reinvesting in machines that
will be a better fit for your
current project pipeline. If
you’re considering applying
for bank loans or bonding,
you’ll need plenty of cash on
hand to demonstrate that your
business is a safe credit risk
and is flexible in response to
a changing marketplace.
4.TAKE ADVANTAGE OF THE
GLOBAL MARKET
Thanks to improved technology and online marketplaces, equipment sellers are
not limited to local buyers,
as they were in decades past.
Canadian sellers can take
advantage of stronger currencies in cross-border sales.
Online marketplaces that
partner with transportation
and customs support can make
it easy and efficient to sell and
buy equipment across borders.
The option to easily market
your equipment to international buyers can also help in
disposing of seasonal equipment. It may be off-season for
that machine in your local area,
but it’s probably in-season in
another global market.
T houg h a l l buyers a re
interested in well-maintained,
low-hour, and late-model
equipment, for international
sales, don’t discount the idea of
offloading older, heavily-used
or damaged machines. Many
value-conscious buyers seek
out older equipment, particularly in developing countries,
and either make the repairs
themselves or use the item
for parts. Often, equipment
that may not meet regulatory
requirements in Canada yet can
still be in high demand from
buyers in developing countries.
Review your equipment
inventory and all upcoming
projects; it may be time to look
at disposal options that can
help you get the best value for
your surplus assets quickly
and efficiently. Consider tradeins or selling at a local auction,
or better yet, turn to an online
marketplace to take advantage
of their buyers from around
the world who may have a
significant exchange rate
advantage, and are looking
to purchase now. An online
marketplace also gives you
the added benefit of not paying
to transport items to auction.
Selling idle equipment in
favour of maintaining a strong
core stable of regularly-used
equipment can improve your
business’s bottom line and
increase efficiencies in storage
and maintenance. Today’s
global, connected marketplace for surplus equipment
makes selling and buying
equipment easier than ever
for your organization.
Economy Auction Hosts
Open House, Raises Money
for Charity
NEED
U
O
Y
N
WHE
GOT IT!
E
W
.
.
.
T
I
E
VINTAG
T
N
E
R
CUR
UR
LOW HO
“United Equipment Rentals” is Northern Ontario’s largest inventory of articulated
trucks and LGP dozers available for rent with over 40 in stock.
Economy Auction Services
and Equipment, based out of
Fort Erie, Ontario, held an
open house on June 1. The
event kicked off with ribbon
cutting and grand opening
ceremonies, and treated registrants to free food provided
by Billy Bones BBQ.
Local Mayor Wayne Redecop
and local media were in
attendance as the community
came together to support the
opening of Niagara’s newest
auction house.
Auctioneer & President of the
Auctioneers Association Frances Fripp auctioned off many
donated sweets to two wonderful
Niagara charities. Over $2,000
was raised for two charities:
Tender Wishes Foundation and
Help A Child Smile.
Based out of the Niagara
Region, the Tender Wishes
Foundation seeks out and
grants wishes to children in
the Niagara Region who suffer
from a potentially life-threatening illness.
Help A Child Smile was
founded in 1987 from the need
to bring some joy into the lives
of children with cancer. The
charity is serving over 800
families whose child is being
treated for cancer at McMaster Children’s Hospital. There
are an average of 150 children
in active chemotherapy at any
given time.
The auction company thanks
everyone who attended, and
helped make the event a success.
Attendees line up for free BBQ food at the Economy Auction Services and
Equipment grand opening and charity auction.
July 6, 2015
www.equipmentjournal.com
A21
|
MacLean Engineering Celebrates Municipal
Vehicle Success with Open House
Ma c L e a n Eng i n e e r i ng
hosted an open house on
June 18 at the company’s
Owen Sound location. The
company organized the customer appreciation event so
that attendees could demo the
company’s municipal vehicles
(the MV2 and MV4), explore
MV attachments, meet with
the product experts behind
the MV line, and experience a
guided tour of the company’s
manufacturing facility there.
MacLean Engineering, who
has been designing, engineering, and manufacturing
equipment solutions for the
mining industry for 40 years,
first brought their engineering
and manufacturing experience
to design the MV in 2006. The
company decided to diversify
its product offering, so that it
will never have to be tied to a
single business cycle.
“When things are tough in
mining, as they are today, a
company serving the mining
industry would have to let go of
employees, and it can be hard
to recoup that skilled labour,
especially in northern Ontario,
where these machines are
manufactured,” explains Scott
Johnston, Technical Sales and
Product Development Manufacturer, MacLean Engineering.
The company spent two
years talking to end-users
and testing their prototypes
before releasing their first MV
(municipal vehicle) in January
2008. At the time, the municipal
vehicle market was already a
mature and saturated market.
Eventually, people accepted
the new entry, and it came to
be known as the red tractor.
In 2010, the company
launched the MV2, and in 2014,
the company launched the
MV4 at the APWA (American
Public Works Association)
Congress and Exhibition.
The MacLean MV gained in
popularity. Now, the company
has more than 200 machines in
the field, and are the number
two manufacturer of municipal
vehicles by sales volume.
Headquartered in Collingwood, Ontario, and with
facilities in Barrie, Owen
Sound, and Sudbury, MacLean
Engineering has more than
400 dedicated team members
worldwide.
2004 BEUTHLING
VIBRATORY
ROLLER,
(ASPHALT),
MODEL B-305,
2.5 TON FINISH
ROLLER, SINGLE
VIBRATORY DRUM, NEEDS MINOR
REPAIRS AND PAINT.
1999 BOMAG
VIBRATORY
ROLLER,
MODEL BW 120
AD-3, 4323 HRS,
FAIR TO GOOD
CONDITION, FRONT DRUM SEAL
LEAKING, ROPS USED DAILY, SERV
RECS AVAILABLE.
2006 BOMAG
VIBRATORY
ROLLER,
BW124DH-3
S/N 901581271156,
3862 HOURS
EXCELLENT
CONDITION.
2000 HAMM
VIBRATORY
ROLLER, MODEL
HD-100, GOOD
COND, 10-12 TON
ROLLER, DBL
DRUM VIBRATORY, ROPS,
66” DRUM WIDTH, SERV. RECS
AVAILABLE.
2000 PACE AMERICAN TRI AXEL
TRAILER, SHADOW GT, BUILT IN
CLOSET, WORK
BENCH, TOOL BOX, 12 VOLT & 110
VOLT LIGHTING GENERATOR RDY,
ALUM RIMS, 6 NEW TIRES, TORSION
SUSP, SPARE TIRE & WINCH, UNDER
6,000 KMS SINCE NEW.
1994 POWER
CURBER,
MODEL
5700-B, 1348
HOURS,
PURCH.REFURB, PAINTED/UPDATE SPRING ‘13, 2 MOLDS,
SERVICED & READY TO WORK.
TOLL FREE: 1-844-338-7373
TEL: (905) 871-4444 FAX: (905) 871-4448
570 INDUSTRIAL DRIVE, FORT ERIE, ON L2A 5M4
Attendees examine the MacLean Engineering MV4 at the MacLean Engineering open house in Owen Sound, Ontario.
BIG
Visit Your Local
TL100 WHEEL LOADER
Terex Dealer Today!
PRODUCTIVITY &
Barrie
Carriere & Poirier
Rent-All
Inc.
Equipment Ltd.
LOWER FUEL CONSUMPTION
Operating Weight:
5,800kg /12,785 lb.
Engine Power:
75 hp / 55.4 kW
Bucket Capacity: 1.0-1.55 m³ / 1.31-2.03 yd³
Barrie, ON
Alfred (Ottawa), ON
www.barrierentall.ca
Ontario & Western
Quebec Regions
705-728-8585
1-866-728-7575
(613) 679-1103
1-855-522-6311
www.carrierepoirier.com
Elliott Farm
Equipment Ltd.
Pembroke, ON
(613) 638-5372
Ottawa Region
Eastern Ontario
Evergreen
Farm & Garden Ltd.
Orono, ON
(905) 983-9119
1-800-461-2120
www.teamevergreen.com
1-800-508-5542
www.elliottfarmequipment.com
Great Lakes
New Holland Inc.
Mitchell, ON
1-888-903-8772
Regional
Tractor Sales Ltd.
Freelton (Hamilton), ON
St. Thomas, ON
FEATURES:
1-888-378-0053
• Disc brakes instead of drum brakers offer reliable
braking torque and high travel speeds.
• Reduced downtime: easy service accessiblity to engine
and battery.
• Even weight distribution of steel structure
provides comfortable driving behavior.
• Ergonomicall designed brak inch pedal
• Excellent visibility.
• Height and tilt-adjustable steering column.
• Hydrostatic flow rate increased by 5% to 76 l/min
• Noise-reducing and easy-to-clean floor mat.
• Electro-proportional additional control circuit.
www.glnh.ca
(905) 659-1094
1-800-875-6219
1-800-508-5542
www.regionaltractor.ca
Top Lift
Enterprises Inc.
St-Laurent, QC
(514) 335-2953
Sherbrooke, QC
(819) 612-5438 (LIFT)
www.toplift.com
(C) 2015 Terex Construction. Terex, the Terex Crown design, and Works For You are trademarks of Terex Corporation or its subsidiaries.
A22
|
July 6, 2015
www.equipmentjournal.com
MOORE
416–747–1212 MOOREJCB.COM
SASKATCHEWAN PUBLIC WORKS
ASSOCIATION EQUIPMENT EXPO
AND GOLF TOURNAMENT
ancing
Up to 0% finhs O.A.C
for 70 mont
July 24, 2015
Moosejaw, MB
https://saskatchewan.cpwa.net/events/
chapter
Moore Productive,
Moore Efficient,
Moore Money
READY MIX CONCRETE
ASSOCIATION OF ONTARIO
CONCRETE TRUCK RODEO
» Operating Weight: 35,111lb (13,615kg)
» Operating Capacity: 3.1yd³ (2.4m³)
» Max. Engine Power: 158hp (118kW)
JCB 409
Business Hours:
Located
at Hwy
400 &
401
»
»
»
»
»
Backhoe Loaders
Skid Steer Loaders
Compact Track Loaders
Wheel Loaders
Hydraulic Excavators
»
»
»
»
»
Mini Excavators
Telescopic Loadalls
Rough Terrain Forklifts
Compaction Equipment
Light Equipment
E
AV
INCH
F
.
WESTON RD
Your complete JCB authorized dealer for:
Mon-Fri 6:30 am - 6:00 pm
Saturday 8:00 am - Noon
OAKDALE RD.
» Operating Weight: 13,125lb (5,953kg)
» Operating Capacity: 1.6 yd³ (1.6m³)
» Max. Engine Power: 74hp (55.4kW)
NATIONAL TRUCK EQUIPMENT
ASSOCIATION TRUCK PRODUCT
CONFERENCE
NORTH AMERICA MINING EXPO
CANADIAN EQUIPMENT LEASING
AND FINANCE ASSOCIATION ANNUAL CONFERENCE 2015
August 19-20, 2015
Sudbury, ON
http://northamericaminingexpo.com
September 16-18, 2015
Gatineau, QC
www.cfla-acfl.ca
SOLID WASTE ASSOCIATION OF
NORTH AMERICA WASTECON 2015
PUBLIC WORKS ASSOCIATION OF
BRITISH COLUMBIA 2015 TECHNINCAL CONFERENCE
August 24-27, 2015
Gaylord Palms Resort & Convention Center
Orlando, FL
https://swana.org/Events/Wastecon.aspx
AMERICAN PUBLIC WORKS ASSOCIATION INTERNATIONAL PUBLIC WORKS CONGRESS AND
EXPOSITION
August 30 - September 2, 2015
Phoenix Convention Center
Phoenix, AZ
http://www.apwa.net/congress
370 Oakdale Rd., Toronto, ON M3N 1W5
September 14-17, 2015
Hyatt Regency Montreal
Montreal, QC
www.swiftconference.org
September 15–17, 2015
Dearborn, MI
https://www.ntea.com/
truckproductconference/
August 16, 2015
1220 Squires Beach Road
Pickering, ON
www.rmcao.org/news-events/events/
rmcao-concrete-truck-rodeo
JCB 427HT
SWIFT CONFERENCE & TRADE
SHOW
September 20-23, 2015
Penticton, BC
www.pwabc.ca/events/
technical-conference-trade-show
READY MIX CONCRETE
ASSOCIATION OF ONTARIO ANNUAL
GENERAL MEETING & CONVENTION
September 24-26, 2015
Minett, ON
http://www.rmcao.org/news-events/events/
rmcao-agm-convention
Call Chris Schnur at 416-605-8777 or chrisschnur@moorejcb.com
Sales: Nick D’Onofrio
416-417-1539 nick@moorejcb.com
Parts: Jonathan Moore 416-678-3421 jonathanmoore@moorejcb.com
Parts: Joshua Lam
416-990-9466 josh@moorejcb.com
HILCO WEBCAST/ONSITE AUCTION
Asset Locations:
• 2121 Airport Dr., Saskatoon, Saskatchewan, Canada
• Hanson Lake, Saskatchewan Canada
Sale Location:
Saskatoon Inn and Conference Center
2002 Airport Drive, Saskatoon, Saskatchewan, Canada
TUESDAY, JULY 28TH
PREVIEW: THURSDAY-MONDAY, JULY 23RD- 27TH
8AM-5PM
VISIT OUR WEBSITE FOR INFO:
hilcoind.com/preferredsandscanada
For more info. please contact Jody Bacque +1 251-404-2367 jbacque@hilcoglobal.com
Dozers • Loaders • Excavators • Rock Trucks • Processing & Storage Equipment
Used in the Production and Distribution of Premium Grade Frac Sand
DOZERS/LOADERS/EXCAVATORS/ROCK TRUCKS
Caterpillar D10T Dozer (2010)
John Deere D6T Dozer (2009)
(2) Caterpillar 980H Wheel Loaders (2009)
(4) John Deere Wheel Loaders (2009)
(4) John Deere 850D Excavators (2006)
(2) John Deere 400D Rock Trucks (2012)
John Deere 326D Skid Steer Loader (2010)
Caterpillar 225 Skid Steer Loader
PROCESSING & STORAGE EQUIPMENT
Starkaire 75 Ton/Hour Bed Dryer
Rotex Double Deck & Single Deck Screens
Dewatering Screens
Portable/Telescoping Conveyors to 125’
Belt Conveyors to 125’ (late as 2008)
(6) 150 Ton Capacity Storage Silos
REMOTE SITE FACILITIES & SUPPORT
Complete 105’ x 100’ Steel Structure Building
Sleeper/Living Quarters Trailers; Kitchen Trailers;
Office Trailers (Some unused – late as 2013)
Cellular Repeater & Cellular Extender
Pumps/Motors/Spare Parts
(5) Dodge Ram 2500 HD; Nissan Pickup &
GMC 3500 Pickup Trucks (2010)
Caterpillar Gensets
Hilco
TM
Industrial
hilcoind.com/preferredsandscanada
In Cooperation
with
gordonbrothers.com/preferredsands
A Buyers Premium is in Effect for this Sale
July 6, 2015
www.equipmentjournal.com
A23
|
0
YEARS
JCB is Celebrating 70 Years in the Construction Equipment Industry
To commemorate this milestone anniversary, we are offering one of our most aggressive finance programs
on various pieces of equipment, including our wheel loaders. The JCB Wheel Loader range has always led
the industry in power and efficiency. Now, through July 31st, they are leading the way in finance offers.
Contact your local JCB dealer for details on how you can finance select JCB Wheel Loaders
for 0% up to 70 months*.
for
up to
FINANCING
*Finance offer is valid until July 31, 2015 on select new wheel loader models at participating JCB Dealers. Offer is subject to JCB Finance approval, availability of eligible equipment and may change without prior notice. Images above may not
reflect those eligible for the finance offer. Additional terms may apply, contact your local JCB dealer for full details.
70
MONTHS*
on select products from the range of
JCB Wheel Loaders
YOUR FAMILY OF LOCAL JCB DEALERS
ONTARIO
Advance JCB
Harriston: 519-510-5878
Waterloo: 519-742-5878
Church’s Equipment
Barrie: 705-458-0870
John’s Equipment Sales &
Service
Frankford: 613-398-6522
Miller Technology
North Bay: 705-476-4343
Moore JCB
Toronto, York Region &
Durham Region:
416-747-1212
Wajax Equipment
Hamilton: 905-383-3654
London: 519-685-1172
Mississauga: 905-624-5611
Ottawa: 613-739-2990
Timmins: 705-267-7000
Thunder Bay: 807-577-1111
Sudbury: 705-692-3656
Windsor: 519-944-8118
NOVA SCOTIA
Wajax Equipment
Dartmouth: 902-468-7352
MANITOBA
Wajax Equipment
Winnipeg: 204-255-2214
QUEBEC
NEWFOUNDLAND
Wajax Equipment
Harvey JCB
Chambly: 1-877-GO-WAJAX
Laval: 1-877-GO-WAJAX
Quebec City: 1-877-GO-WAJAX
St. Felicien: 1-877-GO-WAJAX
St. Johns: 709-738-8925
Corner Brook: 709-634-4336
BRITISH COLUMBIA
Wajax Equipment
ALBERTA
Langley: 604-513-2216
Prince George: 250-562-7321
Sparwood: 250-425-9900
Kamloops: 250-374-5055
Nanaimo: 250-755-2005
Cervus Equipment
SASKATCHEWAN
Calgary: 403-243-2011
Edmonton: 780-448-4522
Ft. McMurray: 780-714-9200
Red Deer: 403-346-9011
Grand Prairie: 780-814-5951
Wajax Equipment
Saskatoon: 306-934-2858
NEW BRUNSWICK
Wajax Equipment
Moncton: 506-857-8870
A24
|
July 6, 2015
www.equipmentjournal.com
WEEKLY ONLINE
AUCTIONS
Hundreds of Inspected and Guaranteed Items in Canada
UPCOMING AUCTIONS
EVERY THURSDAY
July 9, 16, 23, 30
2007 Grove RT9130E Rough Terrain Crane
2013 Komatsu HM400-3 Articulated
Dump Truck
2013 Komatsu D155AX-7 Crawler Tractor
2013 Caterpillar 988H Wheel Loader
2014 Kubota B3300HSD 4x4 Farm Tractor
Caterpillar 330L Track Excavator
The best way to buy and sell used equipment. Period.
FAMILY OF BRANDS
www.ironplanet.com
888-433-5426
www.equipmentjournal.com
July 6, 2015
USED EQUIPMENT
PRICE
$106,000
PRICE
2012 CAT 308DCR EXCAVATOR
$269,000
W/RUBBER PADS, BLADE, AUXILIARY HYDRAULICS, LOW HOURS.
$47,000
2000 CAT D350E 35 TON ARTICULATED TRUCK
PRICE
$189,000
PRICE
$109,000
WITH HYD. COUPLER, 48” BKT., LOW HOURS.
PRICE
$617,000
2009 CAT D6NLGP TRACTOR
2013 CAT 740B ARTICULATED TRUCK
WITH ANGLE BLADE, WINCH, CAB.
2008 CAT IT62H WHEEL LOADER
$194,000
2013 CAT 314ELCR COMPACT RADIUS EXCAVATOR
WITH HYDRAULIC COUPLER, LOW HOURS.
PRICE
2014 CAT 336FL EXCAVATOR
$115,000
WITH HYD. COUPLER, 12’10” STICK, LOW HOURS.
$523,000
1990 CAT D8N CRAWLER TRACTOR
PRICE
PRICE
WITH HEATED BOX, BODY LINERS, LOW HOURS.
$99,500
WITH HYDRAULIC COUPLER, SIDE DUMP AND GP BUCKETS.
$387,000
2011 CAT 966K WHEEL LOADER
WITH 5.25 CU.YD. BUCKET, 26.5R25 TIRES, CAB WITH A/C.
PRICE
PRICE
2014 CAT 320EL EXCAVATOR
$210,000
WITH VPAT BLADE, WINCH, 34” TRACKS, FORESTRY GUARDING.
WITH 2.5 CU.YD. BUCKET, HYDRAULIC COUPLER.
$236,000
2014 CAT 324EL EXCAVATOR
PRICE
1994 CAT IT18F WHEEL LOADER
used.toromontcat.com
WITH HYDRAULIC COUPLER, 9’8” STICK, LOW HOURS.
WITH A/C. GOOD RUNNER.
$28,500
FOR MORE USED EQUIPMENT, VISIT
PRICE
PRICE
PRICE FROM
B1
|
2014 CAT 420FIT BACKHOE
4X4, E-STICK, 24” BUCKET, COUPLER, LOW HOURS.
PRICE
2015 CAT 972M WHEEL LOADER
WITH 6 CU.YD. BUCKET, TIER 4 ENGINE, LOW HOURS.
Contact your local Toromont Cat sales representative for details.
$124,000
2011 CAT CS56 84” SMOOTH DRUM VIBRATORY COMPACTOR
WITH AIR CONDITIONED CAB
1 800-268-1965
B2
|
July 6, 2015
www.equipmentjournal.com
Farm Land Turns into
Limestone Cash Cow
INFOCUS//
WHEEL LOADERS
Lift-&-Carry Wheel Loader
Helps Quarry Meet Customer Demands
Limestone has been in
the ground for hundreds of
millions of years and its use
in building construction dates
back at least to the pyramids
in ancient Egypt.
These days, the limestone
business is much different.
The luxury of time to extract
and fabricate is gone. The most
successful firms need talented
employees and productive,
durable heavy equipment to
meet demanding schedules
a nd del iver h ig h-qua l it y
products.
“Everyone looks for delivery speed,” says Tom Stobbe,
owner (with his sister Linda)
of Ledgerock Ltd., one of the
most complete quarrying and
fabricating firms in North
America. “We have a hard
time getting any kind of a long
lead time. This applies more
toward our dealer network
side of the business, but is part
of our architectural-driven
custom work as well.”
L o c at e d on t he Br uc e
Peninsula in southwestern
Ontario, the company owns
and operates three quarries
that yield some of the world’s
most spectacular limestone.
Tom’s father, Harold, a homebuilder, purchased the land
in the 1960s where the Owen
Sound quarry is located.
“He had a friend who owned
a quarry, so when home construction slowed down, he
started buying land,” Stobbe
says. “Good property was used
for farming, but the rest was
too rocky to grow anything, so
it was not very valuable. What
many people did not realize
was that a good band of stone
ran through the area.”
After Owen Sound (population 20,700), the company
added quarries near Wiarton
in 1965 and Hope Bay in 2002.
The three of them total more
than 1,000 acres. “We have
plenty of product left in the
ground,” notes Stobbe, who
joined the company in 1982.
The Doosan LD250 TC’s parallel lift arms
provide the operator with good visibility.
DIFFERENCE-MAKING
WHEEL LOADER
A quarr y is made up of
multiple layers of stone. Some
are thin (4-to-6-inches thick)
others are much thicker (up
to 36 inches (914 mm)). Each
layer has a unique texture and
colour to it. Ledgerock is the
leading producer of Eramosa
marble/limestone, Algonquin
limestone, Hope Bay limestone, and Mara limestone
(see sidebar on B13).
The stone is removed with
diamond belt saws that cut
it into cubes. The cubes are
removed using a Doosan
wheel loader with a pallet fork
attachment, and then either
transported to the fabrication
building (in the case of the
Owen Sound quarry) or loaded
onto trucks (at the Wiarton
and Hope Bay quarries) for
delivery to fabrication.
Removing and carr ying
the cubes of limestone has
become more efficient since
the company purchased a Doosan DL250TC-3 wheel loader.
The “TC” stands for tool carrier
and features a parallel-lift arm;
this wheel loader configuration
is designed for lift and carry
applications. The 129-kW (172hp) machine weighs 14,296
kilograms (31,769 pounds)
and has a dump height of 2.75
metres (9 feet).
“The wheel loader’s parallel
lift arms provide the operator
with excellent visibility; you
can actually see what the tips
of the pallet forks are doing,”
Stobbe says. “Picture a wall
four-to-five-feet thick with
multiple layers that might be
a foot apart. To remove the
cubes, you need to exert a little
force to break them apart, so
proper positioning of the forks
is critical. If you cannot see
the tips of the forks, it makes
it very difficult.
“The machine keeps the
pallet forks and the material
level, which means there is
one less function the operator has to perform. It is very
helpful.”
A long w it h t he pa r a llel-lift-arm design, the Doosan
wheel loader’s limited-slip
differential helps ensure a
Cubes of rock are removed using a Doosan
DL250TC-3 with a pallet fork attachment, and
then transported to be fabricated.
Tom Stobbe, owner of Ledgerock Ltd. stands in front of his new Doosan LD250TC-3.
steady operation on uneven
terrain. In fact, says Stobbe,
“the ground from the quarry
to the fabrication building
is rough, with a lot of sharp
stones. The DL250TC-3 does
a nice job of keeping the load
level.”
A not her popular wheel
loader feature is the ability
for the operator to change
attachments quick ly and
easily using the hydraulic
quick coupler.
“We change between pallet
forks and buckets frequently,”
Stobbe explains. “After the
blocks are removed with the
forks, there is some cleanup
required because they all do
not come out as a solid piece.
A cube that is cut to size may
fall apart if it is fractured. So,
being able to efficiently switch
to the bucket for picking up the
broken pieces is important.”
B13
July 6, 2015
www.equipmentjournal.com
B3
|
TELSMITH.
GLOBAL PROCESSING SOLUTIONS.
Aggregate, Mining, Industrial and Recycling Operations
T
elsmith consistently demonstrates a commitment to customer needs throughout the
product lifecycle, from experienced applications engineers designing a solution that
enables customers to meet business goals, to craftsmen utilizing the latest advances in
manufacturing technology. Telsmith provides a full range of integrated processing solutions.
JAW
CRUSHERS
IMPACT
CRUSHERS
PORTABLE
PLANTS
CONE
CRUSHERS
I
NG
NI
•
PA R
TS
T
CA
•
SUPPORT
MA
RE
S
ION
PRODUCT LIFECYCLE
SERVICE
•
TR
•
A
MODULAR
PLANTS
C
ustomers can depend on
Telsmith and our dealers
to provide the service,
solutions and support before,
during and after the purchase.
A commitment to customer
satisfaction
and
keeping
Telsmith products running for
decades is the foundation of the
Product Lifecycle Support team.
N
•
AP
P
LI
CANADIAN DEALER
The Groundworx Co. – Nisku, AB .................................780.463.7077
telsmith.com
FACTORY REPRESENTATIVES
George Baker – AB, MB, NB, NL, NS, PE, SK, QC .......519.242.6664
John Watson – BC, YT ...................................................778.212.1447
© 2015 Telsmith, Inc.
142-4644_Telsmith_Canadian_Group_Media_Equip_Journal.indd 1
6/16/15 1:18 PM
B4
|
July 6, 2015
www.equipmentjournal.com
• NO TIME LIMIT POWER BOOST
• INDUSTRY-LEADING SAFETY FEATURES
• EXCLUSIVE INDEPENDENT TRAVEL
• BEST-IN-CLASS FUEL ECONOMY
WE’VE GOT EXCLUSIVE FEATURES
TO GET MORE DONE
With KOBELCO excavators on the
job, youʼll be prepared
for even the toughest
worksite challenges.
Thatʼs because weʼre
committed to building
productivity-boosting
features in our machines
you wonʼt find anywhere else.
While other machines may offer
power boost, ours is untimed and
operator-controlled. Then thereʼs the
exclusive independent travel feature that lets
you dig, lift and travel at the same time. We even
thought of the little things, like swing flashers
and industry-leading visibility that enhance safety.
Plus with premier operator comforts, you might
actually enjoy operating our machines.
MINI
SHORT RADIUS
KOBELCO-USA.COM
CONVENTIONAL
B5
|
July 6, 2015
www.equipmentjournal.com
New Loaders Feature Increased Performance, Improved Cab
Equipped with EPA Final Tier
4 engines, the Takeuchi-US
TW65 SERIES 2 and TW80
SERIES 2 deliver increased
performance, improved serviceability, and an enhanced
deluxe operator’s cabin for
superior operator comfort,
claims Takeuchi-US. The
compact design allows these
loaders to manoeuvre in tight
spaces with minimal damage
to lawns, pavement, and other
sensitive surface areas.
The two loaders provide
reach and dump heights up
to 2.6 metres (8.5 feet) for trouble-free material handling. The
TW65 SERIES 2 features a rated
operating capacity of 1,800
kilograms (4,050 pounds), and
the TW80 SERIES 2 features
a rated operating capacity
of 2,000 kilograms (4,445
pounds).
Delivering power and precise control, both loaders are
equipped with a turbocharged,
water-cooled Deutz engine.
Operating with a maximum
torque of 192 ft-lb at 1,800 rpm,
the engine delivers 55 kW (73
hp) with a rated engine speed
of 2,200 rpm.
The standard travel speed
has a high range of 20 km/h
(12.4 mph) but both machines
are available with a high-speed
road gear option that delivers
a maximum speed of 40 km/h
(24.8 mph). The high-speed
road gear system also includes
a ride control accumulator to
help maintain machine control at higher travel speeds.
Other features include a new
multi-function, pilot-operated
joystick control that not only
controls all loader and travel
functions, it now includes a
thumb wheel to control auxiliary hydraulics. For additional
attachment versatility, an
optional high-flow auxiliary
system is available that delivers
up to 98.4 litres per minute (26
gpm) to power the attachment.
Featuring an improved cab in
both performance and comfort,
the TW65 SERIES 2 and TW80
SERIES 2 are equipped with air
conditioning and heat, adjustable armrest and controller
position, as well as convenient
storage compartments for the
operator. For improved performance, the automotive-styled
interior design also features a
frameless door for enhanced
visibility, inching pedal for
precise machine control, and
precision pilot controls.
“These Takeuchi models
represent some of the most
advanced loaders available in
the marketplace, and operators
will notice a big difference, not
only in performance, but also
in the comfort of the cab,” said
David Steger, National Product and Training Manager of
Takeuchi US. “We know that
these machines will get the
job done, while also delivering
outstanding performance, serviceability, and value.”
Value Parts is your number one choice in North America for quality new, used and rebuilt
industrial equipment parts. We specialize in John Deere and Hitachi, but also have access to
parts inventories for Caterpillar, Timberjack, Bomag, Ditch Witch and many more makes.
CURRENTLY WRECKING
We are currently wrecking a Deere 744H Wheel Loader s/n DW744HX580150+.
Cab, Axles, Cylinders, Boom, Rims and Engine are all in good condition. Also has
a 5.5 cu yd pin-on Craig bucket.
For more information call toll free
1-877-685-4886
DISMANTLED
JOHN
DEERE
330C LC
330LC
270D LC
270LC
230LC
200LC
2054
992E
892E
790E
790D
690E
693D
653G
744H
744E
644G
644E
644C
544H
544G
444E
344H
848G
748G-III
748G-II
748G
748E
648G
710B
410G
310SE
310D
772CH
770CH
772BH
770BH
770A
300D ADT
750C-II
280-II SL
HITACHI
EX330-5
EX300-3
EX270-5
EX270L
E-mail: usedparts@brandt.ca
Inventory: brandt.ca eBay Store: valueparts.ca
Operating with a maximum torque of 192 ft-lb at 1,800 rpm, the engine
delivers 55 kW (73 hp) with a rated engine speed of 2,200 rpm.
International Erosion Control Systems recently
upgraded their wheel loader after celebrating 30
years in the precast concrete manufacturing
business. After carefull consideration, President
and Owner Louis Arvai decided to purchase a
Hyundai HL757TM-9.
What were the biggest factors when chosing the
HL757TM-9?
“Price was a big factor and my experience with
Dennis Hrycun of Blue West Equipment. You
get a lot of value for what you pay and working
with Dennis was a great experience.”
Sunderland: 705-357-3121
Lindsay: 705-324-2221
Campbellford: 705-653-3700
dbuttar@bobmark.ca • www.bobmark.ca
How are you enjoying the new loader?
“We are glad we decided on the HL757TM-9.
We love it. The weighing system displays the
weight of the load on the touch screen display,
we like the joystick hydraulics, and it has great
visibility. It’s a quiet, smooth running machine.
We also bought forks and the quick attachment
feature allows us the change between the
buckets and forks very quickly.”
How’s the service?
“So far it’s been fault free. We haven’t needed
any repairs.”
494 Main Street, Hwy. 3 Courtland
519-688-0909
dhrycun@bluewest.ca • www.bluewest.ca
B6
|
July 6, 2015
www.equipmentjournal.com
CASE AUTHORIZED DEALERS
ALBERTA
We raised the bar on peace of mind.
Rocky Mountain Equipment
Calgary
(403) 243-8600
Edmonton
(780) 486-2273
Grande Prairie
(780) 882-7637
Lethbridge
(403) 327-3154
Medicine Hat
(403) 528-3838
Red Deer
(403) 341-4832
Taber
(403) 223-2333
BRITISH COLUMBIA
Parker Pacific
Campbell River
Cranbrook
Fort St. John
Kamloops
Langley
Nanaimo
Penticton
Prince George
Quesnel
Vernon
Williams Lake
(250) 287-8878
(250) 426-6205
(250) 785-6105
(250) 374-4406
(604) 607-8555
(250) 758-5288
(250) 492-3939
(250) 562-8171
(250) 992-7256
(250) 545-4424
(250) 392-7101
MANITOBA
Hitrac
Winnipeg
(204) 257-3000
NEW BRUNSWICK
Maritime Case
Hanwell
(506) 455-2380
NEWFOUNDLAND
Madsen Construction
Mount Pearl
(709) 747-7841
ONTARIO
J.R. Brisson
Ottawa
Vars
(613) 521-1910
(613) 443-3300
Kucera Farm Supply
Alvinston
(519) 898-2961
Tecumseh
(519) 739-0503
FACTORY WA R R A N T Y *
Strongco LP
Brampton
Grimsby
Kitchener
London
Pickering
Thunder Bay
(905) 791-3131
(905) 643-4255
(519) 744-3518
(519) 652-3234
(905) 428-3808
(807) 475-3052
Tracks & Wheels
Sault Ste. Marie
Sudbury
Timmins
(705) 256-5438
(705) 566-5438
(705) 268-5438
QUEBEC
Longus Equipment
Laval
(450) 628-4866
Levis
(418) 836-2225
Sherbrooke
(819) 843-3555
Varennes
(450) 652-2552
FOR A LIMITED TIME...
Get 3-yrs/3000-hrs of hassle-free, complete factory protection with every fuel-efficient,
high-performance Alpha Series skid steer and compact track loader. That’s an additional
24 months at no additional cost to you. Don’t wait. Offer ends September 30th.
SASKATCHEWAN
Redhead Equipment
Estevan
(306) 634-4788
Lloydminster
(306) 825-3434
Melfort
(306) 752-2273
Prince Albert
(306) 763-6454
Regina
(306) 721-2666
Saskatoon
(306) 934-3555
Swift Current
(306) 773-2951
YUKON TERRITORY
CaseCE.com/3YearWarranty
*The free 36 months or 3000 hours, whichever comes first, includes the manufacturer’s base warranty period, plus an additional two years of manufacturer’s warranty.
Offer valid June 1, 2015 through September 30, 2015 on the following new CASE skid steer loader and compact track loader models: SR130, SR150, SR160, SR175, SR200,
SR210, SR220, SR240, SR250, SR270, SV185, SV250, SV280, SV300, TR270, TR310, TR320, TR340 and TV380. The precise protection afforded is subject to the terms,
conditions and exclusions of the plan as issued. Programs may be changed or cancelled without notice. ©2015 CNH Industrial America LLC. All rights reserved. CASE is a
trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.
Parker Pacific
Whitehorse Yukon
(867) 668-2127
July 6, 2015
www.equipmentjournal.com
B7
|
New Wheel Loaders Emphasize Efficiency, Comfort & Advanced Features
The R530 and R630 from
Kubota Canada Ltd. have
been designed emphasizing
comfort and efficiency and
are equipped with Kubota
diesel engines and advanced
features.
All new inside and out, the
2 new models will feature a
choice of a 4-post ROPS/FOPS
canopy or deluxe factory cab
with air conditioning. The new
factory cab will feature low
noise levels and high visibility
along with fresh and modern
styling and a lower cab height.
The ergonomic interior layout
will be packed with standard
features including suspension
seat, tilt steering, exterior
mirrors, lights, and digital
display.
The R530 w ill feature a
Kubota 38.3-kW (51-hp) Tier
4 final diesel engine using a
common rail system (CRS)
and diesel particulate filter
(DPF) coupled to its tried and
true hydrostatic transmission
(HST). A 48.3-kW (64.4-hp)
version of the engine will
power the R630 but it will
use an advanced electronic
hydrostat ic t ransmission
(E-HST) offering four different
operating modes which will
allow the operator to choose
t he mos t su it able mode
depending on the machine
application.
The R30 series loaders
will showcase Kubota’s new
hybrid link system which
blends the best features of
parallel linkage and Z-bar
s y s t e m s a nd w i l l a l lo w
operators to lift fully loaded
pallets up and down while
keeping the loads level and
at the same time, giving full
breakout force when in bucket
mode. A choice of either skid
steer or euro type hydraulic
coupler will be available on
both models with bucket sizes
starting at 0.85 cubic yards for
the R530 and 1.0 cubic yard
for the R630.
Bot h R 30 ser ies w heel
loaders w i l l be ava i lable
w it h eit her st a nda rd R4
bias, industrial L-2 radials
or Nokian radials with TRI
2 tread design for traction in
snow applications exclusive
to Canadian customers.
The Kubota R630 features a 48.3-kW (64.4-hp) engine and an advanced
electronic hydrostatic transmission (E-HST), offering four different operating modes that will allow the operator to choose the most suitable mode
depending on the machine application.
See Our Full Range of Products:
VAN & FLATBED PRODUCTS • CONTAINERS • STORAGE TRAILERS
www.TorontoTrailers.com
416-477-5488
163 Bowes Road, Concord, ON L4K 1H3
This is not a scaled replica of the Kubota R630; it is the acutal machine
being made to look like a replica. This is how Kubota Canada introduced the
machine at the Landscape Ontario Congress in Toronto in January of this year.
Transport Chains Bulk Chain
or Pre-Cut 5/16”, 3/8” or 1/2”
Chains with Grab Hooks
From $36.99
Winch Straps and Ratchet Straps
All Sizes and Types Available
Chain Binders
Ratchet, Lever and Recoilless
Type Available
From: $19.99
From $11.99
Hy-Brid Lifts Expands
Dealer Network
Custom Equipment Inc.
increased its dealer network
by 12 companies for its line
of Hy-Brid Lifts. An increase
in dealer channels will lead
to a broader range of access
for contractors looking for lifts
across the region. Over the past
six months, Custom Equipment
has partnered with several
dealers throughout Canada
and the US, which opens more
opportunities for customers
to experience the benefits of
Hy-Brid Lifts.
The new Canadian dealer
network includes the following three companies:
■■ Canmore Outdoor Power
Equipment Ltd. (Canmore,
Alberta),
■■ Mid Manitoba Equipment
Rentals Ltd. (The Pas, Manitoba), and
■■ Voisin’s Equipment Rental
Ltd. (Guelph, Ontario).
“We are excited about establishing these new partnerships
and adding to the Hy-Brid Lifts
dealer channel,” said Justin
Kissinger, Custom Equipment
marketing manager. “We look
forward to supporting and
growing our relationship with
these dealers, as well as working
together to find solutions to best
fit our customer’s needs.”
Safety Flags and Banners
D Dimensional Banners,
Wide Load Banners,and Safety
Flags
From $4.99
Winches and Accessories
Portable, Welded, Sliding Winches
Strap Winders and Winch Bars
Storage Containers
Rent from $100 p/month
Buy from $1900
The extra
uptime is
FREE!
Lower costs for parts and service will
pay back your investment fast with
Beka-Lube automatic lubrication systems...
and there’s no extra charge for the
added productivity from your equipment!
The Hy-Brid HB1430.
• More production, less unscheduled downtime
• Longer life for critical components
• Expert factory support with dealers nationwide
1.888.862.7461
ww w. beka-lube.com
B E K A
-
026-065 EJ 6.875x5.75 2C.indd 1
L U B R I C AT I O N
S P E C I A L I S T S
S I N C E
1 9 2 7
2015-04-17 11:00 AM
B8
|
July 6, 2015
www.equipmentjournal.com
Komatsu America Corp. Introduces New WA470-8 Wheel Loader
Komatsu America Corp., a
leading global heavy equipment manufacturer, has introduced the new WA470-8 wheel
loader. With a 272 HP Komatsu
SAA6D125E-7, variable geometry turbo charged and after
cooled Tier 4 Final certified
engine, the wheel loader uses
up to six percent less fuel than
its Tier 4 Interim predecessor. The WA470-8 is a utility
performer featuring Komatsu’s
SmartLoader Logic, combined
with a lockup torque converter
that activates in second, third,
and fourth gears. Working
together, the system provides
optimal engine torque for
improved acceleration, hill
climbing, a higher top speed,
and fuel savings.
“ T he WA470 - 8 h a s a n
outstanding combination
of stability, break out power
and tractive effort,” said Rob
McMahon, Komatsu America
Product Manager. “Whether
you’re moving gravel, transporting pipe, charging hoppers
or working with landscape
materials or aggregates, the
WA470-8 is the machine you
want on your worksite. Available machine attachments
specifically adapted for logging
Pincher Creek, AB T0K 1W0
403-627-9300 jordan@ramias.com
www.sidumpr.ca
2015 BRAND NEW SIDUMP’R SR344-60 SIDE DUMP TRAILER STARTING
AT $49,900. USD FOB COLUMBUS NEBRASKA C/W:
• Tri-axle with 60” spreads.
• 36’ Tub 1/4” hardox skin
• Reyco AR23 Air Ride Suspension
• Reyco axles
• Standard manual drop legs
• Mud flaps
• Fenders
• LED lights
• Air weigh digital scale
• FASSE valve
• Standard colours are Black, Grey, White or Yellow
• Custom paint colours available upon request
• 1 year mfg warranty, 2 year cylinder warranty,
3 year tub warranty!
We have a wide variety of Sidump’r Trailer configurations and B-TRAINS available!
Canadian Distributor for Sidump’r Trailers. Please email our sales dept
at jordan@ramias.com and we will be glad to assist you!
WHATEVER
YOU’RE LOADING...
WE’VE GOT
YOU COVERED!
800-606-8765 | rick@ramias.com | www.sidumpr.ca
RENT OR BUY ME!
regeneration components.
and waste handling applica- ■■ Komatsu Auto-Idle Shutdown to reduce idle time
The WA470-8 and ever y
tions extend the machine’s
and save fuel.
other Komatsu Tier 4 Final
versatility,” McMahon added.
Komat su desig ned t he ■■ Auxiliary jack and two 12 construction-sized machine,
volt ports.
whether rented, leased or
machine’s Diesel Particulate Filter (KDPF) and other ■■ 7 inch, full colour, high purchased, is covered by
resolution monitor with t he Komat su C A R E proafter-treatment components
Ecology Guidance.
gram for the first three years
in conjunction with the engine
for efficiency and long life. ■■ Separate full colour rear or 2,000 hours, whichever
view monitor standard. comes first. Komatsu CARE
A Selective Catalyst ReducAdditional features and includes scheduled factory
tion (SCR) assembly further
ma intena nce, a 50-point
reduces NOx emissions using benefits include:
diesel exhaust f luid (DEF). ■■ Sw ing out cooling fan inspection at each service,
with wider fin spacing and up to t wo complimentar y
The engine uses an advanced
standard auto-reversing Komatsu Diesel Particulate
electronic control system to
fan for ease of cleaning. Filter exchanges and up to two
manage the air-f low rate,
fuel injection, combustion ■■ Gull-wing engine doors DEF tank flushes in the first
provide quick, convenient five years. With select labor,
parameters and after-treataccess for daily checks fluids and filters covered by
ment functions to optimize
and service items.
Komatsu over this period,
performance, reduce emissions and provide advanced ■■ Full rear fenders standard. Komatsu CARE lowers owner■■ Sight gauge at DEF fill cap ship costs, raises resale value,
diagnostic capability.
to minimize overfilling. and improves equipment
IN-CAB ENHANCEMENTS
■■ Additional hinged panels at uptime and availability.
& FEATURES INCLUDE:
each side for easy access to
■■ New, air-suspension,
high-back heated seat that
softens machine vibrations
for operator comfort and
cast frame members for
increased strength.
■■ Seat-mounted electronic
pilot control levers with
F-N-R switch for operator
convenience and reduced
fatigue.
■■ P i o n e e r i n g K o m t r a x
telematics system and
monitor t hat prov ides
key mach i ne met r ics,
including KDPF status
and DEF-level data, fuel
consumption, plus performance informat ion
collected and sorted by The Komatsu WA470-8 wheel loader has a dump height of 3.75 metres
operator ID.
(12.3 feet) and a bucket capacity of 5.0-5.75 cubic yards.
RENT READY!
GTA & SUDBURY HEAVY EQUIPMENT
SALES, RENTALS & REPAIRS
WHEEL LOADERS-MANY TO1CHOOSE
FROM
of 3
2013 CAT 336DL
Cat 924G-H, 924K, 950G-H, 966B-D, H+K
Kawasaki 65TMV-2, 65ZV TM, 70ZV II, 80ZV, 95ZV-2
Komatsu WA380, WA450-1 // Volvo L70C
Pin grabber, A/C, 12’10” stick, 54” bucket.
RENT OR BUY ME!
RENT ME!
2006 JOHN DEERE 450J LT
2013 CAT D6N LGP
1950 SMU, OROPS, John Deere 4045T turbocharged
diesel engine @ 70 hp, 6 way blade, 16” single bar
pads.
Encl. cab c/w A/C & heater, 13’4” power angle power
tilt blade, 33” extreme service pads, low ground
pressure, Paccar Model PA55 winch, rear screen.
We Are Your
One Stop Shop!
• 2 Shops & 14 Bays
• Highly Recommended Repair Shop
• Factory Trained Licensed Mechanics
OEM PARTS & SERVICE
RENT ME!
RENT OR BUY ME!
BOMAG BW211PD-40
2014 CAT 735B ROCK TRUCK
84” pad foot roller, Deutz power, ROPS canopy.
6x6, 36 ton payload, box liner.
SUDBURY | SAULT STE. MARIE | BARRIE
Give us a call: 416.770.7706
BMCDOWELL.COM
Compaction
Compact Equipment
Hammers
Wheel Loaders
Air Compressors
SALES@BMCDOWELL.COM
Trailers/Floats
“If We Don’t Have It...
We Will Find It For You!”
HEAD OFFICE: 705-566-8190 (SUDBURY)
www.equipmentjournal.com
July 6, 2015
|
B9
B10
|
July 6, 2015
www.equipmentjournal.com
Case Unveils Tier 4 Final 621F & 721F Wheel Loaders
Case Construction Equipment announced that its 621F
and 721F wheel loaders now
meet Tier 4 Final emissions
standards. Like the Tier 4
Interim models, each model
is equipped with a selective
PUSH
PULL
cataly tic reduction (SCR)
solution that treats emissions separately with Diesel
E x haust Fluid (DEF) and
does not require the engine
to re-circulate exhaust gas.
This technology improves
fuel efficiency (up to 20%
g reater t ha n prev ious
solutions), lowers exhaust
temperatures and fuel consu mpt ion, a nd prov ides
excellent throttle response
and simplified maintenance
Same Day Nationwide Shipping Service
No Surcharge
PUSH-PULL, BRAKE,
CLUTCH, PTO, VALVE and
ACCELERATOR CABLES
DIV. OF RING
DIV. OF RING
RADIATOR
RADIATOR
PRODUCTS
PRODUCTS
(1989)
(1989)
LIMITED
LIMITED
Ontario
Control
Cables
8C
C ., B
, O L6T 4P8
ARSON
RT
RAMPTON
N
(905) 458-9576
Fax: (905) 458-6461
E-Mail: occ@mclgroup.ca
Same Day
Service
And Shipping
If Ordered By
12 Noon!
We Accept:
*
MasterCard®
without sacrificing power,
claims Case. It also requires
no diesel particulate filter
(DPF) regeneration, or maintenance.
The 621F and 721F wheel
loaders produce 121 a nd
133 net kW (162 and 179 hp),
respectively. Both machines
are also available with XT
(tool carrier) or XR (extended
reach) linkage and specialty
configurations for even greater
versatility and productivity.
With SCR, these machines
achieve lower temperatures
in the engine exhaust system
while optimizing combustion
to achieve greater fuel economy and peak horsepower.
The SCR design on the 621F
and 721F also contributes to
machine uptime by eliminating the need for manual
diesel particulate filter (DPF)
regeneration and the associated downtime that occurs
with wheel loaders that use
cooled exhaust gas recirculation (CEGR) technology. SCR
also results in extended time
between service intervals as
lower ambient temperatures
result in slower degradation of
lubricating oil. Additional fuel
savings can be achieved with
a standard engine shutdown
feature found on each model
that allows the operator to
limit engine idle time.
As with previous models,
the 621F and 721F wheel load-
auto locking differential and
advanced system programming.
The optional five-speed
transmission includes the
Case Powerinch feature that
lets operators approach targets quickly and precisely
regardless of engine speed.
It ensures there is no rollback
even on steep slopes, making
it easier and quicker to dump
into a truck.
The new wheel loaders feature cabs with full climate
control, an award-winning
joystick steering option that
helps reduce operator fatigue,
and floor-to-ceiling windows
for good visibility to attachments. A ll ser v ice points
DISCOVER
MERLO
IN ACTION
Both the 721F (above) and 621F models are also available as waste handlers.
THE ULTIMATE
ers feature four programmable
power modes that allow users
to match the machine output
to available engine power. The
loaders include heavy-duty
axles with auto-locking front
and open rear differentials for
optimal traction in virtually
all conditions. The axle design
also helps reduce tire wear,
especially on hard surfaces.
The 621F and 721F also
offer an optional “Efficiency
Package” t hat includes a
f ive-speed t ra nsm ission
with lock-up torque converter
for faster road travel speed,
acceleration, and shorter cycle
times, as well as axles with
TURBOFARMER 40.7
MACHINE
a re g rouped a nd located
t h roug hout t he mach i ne
for easy access. An optional
rearview camera and heated
air-ride seat make operation
easier and more comfortable.
Ser v iceabilit y w it h t he
621F and 721F is simple with
ground-level service points
and eye-level f luid gauges.
The mid-mounted cooling
module limits debris buildup
and provides easy access for
routine cleaning. And a standard, electronically controlled
power-tilt hood makes access
to the engine compartment
easy.
Your authorized DEUTZ dealer
Don't Loose
Your Head!
INCREASE YOUR PROFITS:
PRECISION
PRODUCTIVITY
VERSATILITY
FUEL
Quick top end repairs on your
1011 & 2011 series DEUTZ engines.
PANORAMIC 72.10
Call us first. We save you time & money.
CENTRAL DIESEL SERVICE
FIND A MERLO DEALER NEAR YOU:
Solid Service Since 1983
/canada-dealers
PANORAMIC 25.6
6604 Davand Dr., Mississauga, Ontario L5T 2M3
Email: deutz@on.aibn.com
905-564-9444
Fax: 905-564-9313
July 6, 2015
www.equipmentjournal.com
B11
|
Kawasaki Loader Proves Itself in Ontario Quarry
Rat hwell Gravel, an
aggregate hauler based out
of Brussels, Ontario, owns
a Kawasaki 90Z7 that they
purchased from Great Lakes
New Holland (GLNH); the
machine, which primarily
feeds the screen plant and
loads trucks at the company’s
quarry, replaces a non-Kawasaki wheel loader.
The Kawasaki 90Z7 wheel
loader is bigger than its predecessor and packs a big 210
net kW (280 hp) Hino diesel
engine. The General Purpose
bucket is 5.5 cubic yards and
the Material Handling bucket
is 6.1 cubic yards. This is an
ideal machine for stockpile
loading, plant applications,
and a variety of other general
loader applications. It will
also have the f lexibility of
being sold in special applications such as hot slag, refuse
and logging.
“Great Lakes New Holland
brought out a machine to
run. It offered lots of power
and a smooth ride. Its a solid
machine,” says Rathwell.
The machine’s Z-linkage
provide excellent digging
performance. SimulLoad
system allows for simultaneous actuation of lift and tilt
while digging. The patented
“IntelliDig” system balances
rimpull power and breakout
force when digging tough
materials to speed cycles.
The open center system
of the 90Z7 allows for better
feel and response. Shockless
Declutch provides smooth
declutch function for level or
slope operations. The air ride
seat can be heated to provide
comfort in cold climates.
FlexShif t varies t he shif t
points of the transmission
to match working conditions.
T h i s pro duc t ion c l a s s
loader features the IntelliTech family of innovations,
a comprehensive package
of features that affects all
phases of the wheel loader
application. These features
use logic or intelligence to
adjust the operating characteristics of the machine,
sensing the work ing conditions and adjusting the
powertrain and hydraulics
to best match application or
environmental requirements.
Many of the IntelliTech operations are automatic, while
others allow the operator to
select functions appropriate
for the application or work
environment.
T he operator ca n set a
variety of items to allow the
machine to fit production
needs. Set power settings,
lif t arm k ickout sett ings,
declutch setting, and even
the way the transmission
shifts to fit the application.
The adjustable arm console
contains rocker switches for
convenient selection of the
Power Mode, Automode 1 &
2, Variable Declutch, Manual
DPF Regen, Control Lever
WHEEL LOADERS:
55 YEARS AGO
Lock, and optional Ride Control. Fingertip, pilot-assisted
hydraulic controls can be
single or dual lever.
But, operators will be most
impressed with the total redesign of the operator station on
the new Kawasaki Z7 wheel
loaders, claims the company.
The new Z7 operator compartment features a low-profile
dash, full-length glass doors,
panoramic front w indow,
standard rearview camera
and well-organized storage
areas. The sophisticated dash
mon itor prov ides a w ide
range of operating data as
well as the ability to adjust
systems and prov ide f uel The operator of a Kawasaki Z7 machine, such as this 90Z7 at work at the Rathwell Gravel in Brussels, Ontario,
can set a variety of items to allow the machine to fit production needs.
economy data on request.
Bobcat of Kingston
“ The renters love ease and the great visibility...”
Jamie Impola from Bobcat of Kingston stands with Colin, Chris and Haley Wilson from A World of Rentals who were ready to rent their 3 Bobcat machines.
Chris and Colin Wilson brothers and
owners of A World Of Rentals have serviced
the Kingston area for the past 17 years. Chris’s
daughter Haley Wilson has now also joined the
family business. Their reputation has been
built by providing top quality rental equipment,
competitive pricing, and personalized customer
service.
move piles of material quickly, on a turn of a anything on one of the machines, and if it needs
dime and still give you 5¢ change. It is smaller servicing, they pick it up and drop it back off.
Saves us downtime. Jamie Impola also as has
than standard size skid-steer loaders (48”).”
great follow-up.”
“The renters love ease and the great
visibility of the MT55 machines. These are a
Thank you Chris and Colin “The Wilson
huge safety feature for our renters. We also Brothers”
have the post-hole augers for those machines.”
“Most renters are novices so ease, visibility
The Wilson brothers currently own 2 and reliability of these machines are very
Bobcat® MT55 machines and a Bobcat S100 important. People generally are less intimidated
skid-steer loader.
by compact equipment.”
“Kingston is an old city with many narrow
“Jamie Impola, Equipment Sales
access ways into residences. We needed Representative, for Bobcat of Kingston is
something that could go into those narrow the friendliest rep. we have ever dealt with.
areas without damaging the homes. That is He came knocking on our door and after
why we chose to purchase Bobcat Compact discussions, helped us picked the perfect
Equipment. 3 to 4 feet makes a big difference,” machines for our business. Bobcat of Kingston
says Chris Wilson.
also gives extra customer service by showing
“The Bobcat S100 skid-steer loader can up at our door if we want them to check out
P ic t u re d above i n t he
early 1960’s is a Michigan
85A Series II front end loader
having just been delivered
to t he Count y of Elgin in
Southwestern Ontario.
C la rk Equ ipment Ltd.,
headquartered in Benton
Harbour, Michigan, began
building Michigan loaders
from the mid-1950’s on in St.
Thomas, Ontario. This unit
was a second generat ion
straight frame, rear-wheel
steer loader rated i n t he
two-cubic-yard range and
was usually powered by a
4-53 General Motors twostroke diesel engine of some
9 4 -kW (12 5 -hp) Popu la r
with contractors and local
governments alike, loader
options included a 4-in-1
bucket a nd a n ava i lable
backhoe attachment primarily intended for municipal
applications.
Production of loaders and
large forklifts continued at
the St. Thomas plant until
the early 1980’s when Clark
beca me pa r t of t he V ME
group with the Michigan line
becoming part of the Volvo
brand. Capital Construction
E qu ipment Ltd. w a s t he
Ontario dealer at the time.
To see some 45 restored
pieces of vintage construction
equipment in action be sure
to mark your calendars for
HCEA Canada’s ‘Last Blast’
event October 17, 2015 to be
held at the Simcoe County
Museum near Barrie, Ontario.
HCEA Canada is a proud
Community Partner of the
Simcoe County Museum.
Your local authorIzed Bobcat dealers
BARRIE
Bobcat of Barrie
1-888-637-RENT
705-726-2228
BRANTFORD
Bobcat of Brantford
519-752-7900
bobcatofbrantford.com
CASSELMAN
Casselman Farm Equip Ltd.
613-764-2033
1-877-244-5593
CORNWALL
Bobcat of Cornwall
613-932-2034
1-877-840-4182
COURTICE
Bobcat of Durham East Ltd.
905-404-9990
bobcatofdurhameast.com
FRANKFORD
John’s Equipment
613-398-6522
Fax: 613-398-0072
HAMILTON
Bobcat of Hamilton
905-643-3177
Fax: 905-643-1798
KINGSTON
Bobcat of Kingston
613-546-3336
Fax: 613-546-0567
KITCHENER
Bobcat of the TriCities Ltd.
1-866-214-3939
LONDON
Bobcat of London
519-455-4900
bobcatoflondon.ca
OTTAWA
Bobcat of Ottawa
613-745-5775
Fax: 613-745-3341
OWEN SOUND
Bobcat of Owen Sound
519-372-0937
STRATTON
Stratton Equipment
807-483-5505
Fax: 807-483-5881
SUDBURY
McDowell B Equipment Ltd.
705-566-8190
Fax: 705-566-6401
TORONTO
Bobcat of Toronto
416-679-4172
1-866-207-8406
bobcatbarrie.com
bobcatoftc.com
PARRY SOUND
Bobcat of Parry Sound Ltd.
705-342-1717
bobcatofparrysound.com
bobcat.casselmanfarmequip.com
bobcat.johnsequipmentsales.com bobcatofhamilton.com
strattonequipment.com
bobcatofottawa.com
bmcdowell.com
bobcatofcornwall.com
bobcatofkingston.ca
bobcatofowensound.com
bobcattoronto.com
B12
|
July 6, 2015
www.equipmentjournal.com
Tier 4 Final 457 Shows Off New
JCB ‘CommandPlus’ Cab
JCB is taking the wraps off
a striking new wheel loader
design, which comes complete
with the all new ‘JCB CommandPlus’ cab. The powerful
JCB 457 is the first machine to
show off the completely new
cab structure, engine cover, and
rear counterweight design, all of
which contribute to improved
visibility, lower noise levels,
increased internal space, and
an enhanced working environment for the operator.
In addition, the 457 is the
first large JCB wheel loader
to meet Tier 4 Final emissions
standards, with the adoption of
a powerful MTU diesel engine
that is perfectly matched to the
machine’s operating duties.
The engine contributes to a
massive fuel savings of around
16% compared to the previous model. As with other JCB
machines, the engine in the
457 meets Tier 4 Final without
the need for a costly diesel
particulate filter (DPF), relying
on an efficient combustion
process, with a selective catalytic reduction (SCR) system
and an exhaust fluid additive
to meet the regulations.
NEW JCB
COMMANDPLUS CAB
The 457 is the first machine
from JCB to utilize the company’s next generation JCB
CommandPlus cab. This totally
new ROPS structure has A pillars that have been moved out
to the same width as the rear
of the cab, providing a larger
interior with a panoramic front
windscreen. The machine features JCB’s Command Driving
Position, with revised pedals, a
new adjustable steering column
and seat-mounted hydraulic
controls.
All switches and auxiliary
the machine’s rearview camera.
The JCB CommandPlus cab
delivers increased internal
space as the heating, ventilation, and air conditioning
system has been repositioned
outside the main cab structure.
This provides additional storage
for the operator, both behind
the seat and in pockets in the
The next generation JCB CommandPlus cab features JCB’s Command Driving
Position with revised pedals, a new adjustable steering column, seat-mounted
hydraulic controls, and a panoramic front windscreen.
controls have been repositioned on the right-hand A
pillar, providing the operator
with a simplified interior and
easy access to all machine controls. The 457 has two full colour
LCD screens, one in the central
console and a second at the top
of the right-hand A pillar. This
second screen incorporates
access to the loader’s operating
menus and acts as a monitor for
front and side consoles. The
new cab, in combination with
the MTU engine, a hydraulically-driven on-demand cooling
fan and the repositioned air
conditioning system, contributes to a huge reduction
in internal noise levels, from
71dB(A) to 68dB(A), subject
B14
CANADA’S PREMIER
70
PARTS & SERVICE PROFESSIONALS
$
We’ve got
that
says your next Skid Steer,
Backhoe or Telehandler
will be a JCB.*
We’re so sure you’ll love our equipment, we’ll give you $70 if we’re
wrong! Register now to TEST DRIVE select JCB machines with
your Ontario JCB dealer and see why it’s time to switch to the safest,
most comfortable and hardest working machines on the market.
Your Source For:
PLANET ARY AXLES • DIFF ERENTIALS • TRANSMI SSIONS
TORQUE CONVERTERS • TRANSFER CASES • WHEEL ENDS
PTOs • PUMP DRIVES • MIXER DRIVES • FULL SERVICE SHOPS
OFF HIGHWAY
Go to www.jcbontario.com
for offer details.
www.gearcentre-offhwy.com
*Offer valid until August 31st, 2015 on select new
models manufactured by JCB Inc. Additional terms
and conditions apply.
105-001 EquipJournal Quarter pg AD R1.indd 1
EDMONTON
CALGARY
1-877-450-4327 1-888-252-3880
2015-05-14 10:05 AM
SURREY
MISSISSAUGA
1-877-882-1529 1-888-246-5077
July 6, 2015
www.equipmentjournal.com
B2
Farm Land Turns into Limestone Cash Cow
FABRICATING QUALITY
PRODUCTS
The next stop for the cubes is
Ledgerock’s fabrication shop,
a building that is well over
100,000 square feet. Plenty
of new technology is evident
throughout the plant. Ten CNC
(Computer Numerical Control) machines produce a wide
variety of stone shapes and
sizes. Five of the units are set
up as milling centers, where a
computer-aided design turns
out a computer-aided final
product.
The quarries are closed from
October through April, but
the fabrication shop operates year-round. The stone
is produced and sold to two
customer groups. Standard
products are sold to landscapers and homebuilders through
dealers in the masonry supply
business in both Canada and
the United States; the bulk of
the orders come from southern
Ontario. Custom products are
sold directly to the customer,
mostly for use on building
exteriors. Architects like the
unique look of limestone and
are often repeat Ledgerock
clients.
T he compa ny has custom-produced exterior limestone for an impressive list of
clients throughout Canada,
including the Isabel Bader
Theatre, Ontario Heritage
Centre and the Ontario Legislative Assembly buildings
in Toronto; the Olympic Village in Vancouver; Butterfly
Conservatory in Niagara Falls,
and numerous hospitals and
universities. One of Stobbe’s
favorites is the Ivey School of
Business at the University of
Western Ontario.
“It is a ver y impressive
building,” Stobbe says. “The
architecture is very modern.”
Stobbe cont inues to be
impressed with the performance of his Doosan wheel
loader as well. Not only does
the machine help his 150
employees keep up with the
time-sensitive dealer and
custom orders, but it also
gets high marks for ease of
maintenance, reliability, and
durability in what Stobbe calls
a demanding application.
“Before we purchased the
DL250TC-3, I had no history
with Doosan, but the demonstration and the total package
(price, financing, and warranty) was quite appealing,”
he says. “We are running 30
pieces of heavy equipment.
Some employees like one
brand, some like another
brand. And now we have a
growing number of operators
who prefer Doosan.”
Dry Vac Rentals
VARIETY OF LIMESTONE TYPES
MINED FROM LEDGEROCK QUARRIES
The types of limestone produced in the three quarries
owned and operated by Ledgerock in southern Ontario
include:
■■ Algonquin: Indigenous to the Wiarton area and not
known to exist anywhere else in the world, it displays
warm, neutral, and earthy tones.
■■ Eramosa: A very durable and long-lasting product
that is unique to the Wiarton and Owen Sound areas.
■■ Flagstone: It is known to split naturally at varying
thicknesses.
■■ Hope Bay: With an inconsistent cloud-like pattern, it
is a popular choice for exterior applications.
■■ Indiana: The colouring and pattern are consistent
throughout the stone, usually buff or gray tones.
■■ Mara: Often polished for use in marble countertops
and flooring.
■■ Senesun: Quarrying restrictions and difficulties limit
this stone to small and midsize projects.
■■ Strata: Used primarily for retaining and stone walls
because of heavy pockmarking.
■■ Wiarton Brown and Grey: Normally sold together for
midsize and large construction projects
No water Required • Dump on Site
Material is Dry • Serving the GTA
www.gearequip.com
71 Steinway Blvd., Toronto, ON, M9W 6H6
TRI-CITY EQUIPMENT
416-644-3076
All Equipment For SALE/RENT.
Also Available With A Variety of Attachments.
Industry leader in on-site equipment and earthworks solutions.
3 IN STOCK
FULLY EQUIPPED & READY TO GO
2015 HITACHI ZX470 Tier 4, medium stick,
Q/C, rear camera, choice of buckets.
2013-14 CAT 930K Q.C., 3rd valve, forks.
NOW RENTING TRACK
DUMPERS
2012 – 2014 HITACHI ZX135 equipped
w/dozer blade, choice of buckets.
MOROOKA MST2200VD, 250 HP Cat engine.
$69,000.
60’ LONG REACHES
2010 VOLVO 290CLC 60 foot reach, available with
ditching or digging bucket.
IN STOCK AND - READY TO RENT!
B13
|
2013 CAT 336EL, aux. hyd., hammer
available.
2006 KOMATSU WA250, Q/C, 3 yard
bucket, 6400 hours.
IN STOCK AND - READY TO RENT!
84” COMPACTORS smooth drums and D6N’s and D6T’s - LGP’s and 6-way blades CAT D8T SU blade, single shank ripper,
padfoots available.
available.
winch also available.
Tri-City Equipment is a 100% privately owned Canadian corporation.
25 & 35 TON TRUCKS ALSO IN STOCK!
2015 VOLVO A30G’s tailgates and flotation tires.
CONTACTS:
Jeff Armishaw: (519) 240-2115
Main Phone: (519) 767-9628
Don Tindall: (519) 827-4294
Fax: (519) 837-1161
TOLL FREE:
1-800-646-2064
VISIT US:
91 Monarch Road, Guelph ON, N1K 1S4
EMAIL US:
info@tricityequipment.com
B14
|
July 6, 2015
www.equipmentjournal.com
B12
New JCB ‘CommandPlus’ Cab
WWW.PINERIDGELISCOEDWARDS.CA
NEW!!
MDP 30R
to final production tests.
Operators also benefit from
LED lighting all around and the
option of electrically adjustable
and heated mirrors, for better
visibility in all operating conditions. The rear view mirrors
are now mounted in front of the
repositioned A pillars, making
it easier for the operator to see
all around the machine. The
cab door is hinged at the front,
allowing easier access and exit
from the machine for the operator from the steps. This also
makes it easier for technicians
to access the engine for regular
maintenance and service work.
MORE POWER,
LOWER EMISSIONS
Equipment in stock for
Sale or Rent









$95,500CAD
CAT 320, plumbed, hyd. thumb
CAT 330C, Q.C, plumbed
CAT 330C, Q.C
CAT 330D, Q.C
CAT 330D, Q.C, low hours, plumbed
CAT 345B Series 2, Q.C
CAT 1990 Generator 3306
CAT D4H
Various Grapples, hammers,
buckets and sticks
CAT 320CLU 2004 9800hrs
Quick Coupler, plumbed,
hydraulic thumb. Comes with
GP & wrist twist buckets
NEED SERVICING?
WE CAN COME
TO YOU!
FOR A COMPLETE INVENTORY LIST VISIT OUR WEBSITE
Don Edwards - Owner/operator
Kevin Campbell - Director Operations
don@pineridgeliscoedwards.com
kcampbell@pineridgeliscoedwards.com
SUBSCRIBE TO
Name:
Company:
Type of Business:
Address:
City:
Province:
Telephone:
Website:
Postal Code:
Fax:
Please rush our subscription today! We enclose payment for:
 1 Year $44.00 (Includes applicable taxes)
 2 Years $72.00 (Includes applicable taxes)
CHEQUE
ENCLOSED
 U.S. 1 Year $80.00 U.S.
*H.S.T. #104003 7957 RT • Foreign Rates Upon Request
Account #:
Expiry Date:
Today’s Date:
Signature:
Sign up for our newsletter
and receive an extra
3 months FREE
Email:_______________________
Mail order to: 5160 Explorer Drive, #6, Mississauga, ON L4W 4T7
Or FAX to 1-800-210-5799 or email office@equipmentjournal.com
EJSUB2015
The JCB 457 is powered by
a 7.7-litre MTU Tier 4 Final
engine, delivering 193 kW (258
hp), up from 186 kW (250 hp) on
the previous machine, despite
the smaller engine capacity.
More importantly, the engine
delivers this increased output
at lower rated engine revs, cutting fuel consumption, noise
and emissions. JCB has also
fine-tuned the match between
engine, torque converter, and
transmission, to perfectly
match the engine with both
the standard four-speed and
optional five-speed transmissions. This has resulted in fuel
efficiency gains of up to 16%.
As with other JCB machines,
the 457 achieves Tier 4 Final
emissions standards without
the requirement for a costly
and complex DPF. This reduces
cost and service time for customers, increasing uptime and
profitability.
The most visible change to
the 457, aside from the new
cab, is the adoption of a sloping
one-piece engine canopy. This
engine cover can be electrically
raised away from the cab to
provide improved access to
the engine and drivetrain for
regular maintenance. The rear
section can also be hinged away
from the machine to provide
access to the cooling pack,
which now features a swing-out
hydraulically-driven, on-demand cooling fan situated at
the rear of the machine.
The new JCB wheel loader
design will be adopted by
smaller models in the line
as they move to Tier 4 Final
emissions standards over the
coming months.
The Tier 4 JCB 457 w ill
come as standard with JCB’s
LiveLink telematic system.
This provides fleet managers
and owners with remote access
to real-time fuel consumption
and machine working data,
including operating hours and
fault codes.
JCB LiveLink also allows
customers to set working hour
curfews, outside of which the
machine will not function,
along with geofencing. This
permits the owner to set a
geographical area in which
the machine can work. If the
loader is taken out of this area
it will not start, deterring theft
from the jobsite.
TAILORED DESIGN
The 457 is available with
four loader arm options, to
suit a range of industry applications. These include fourram parallel lift geometry HT
arms that provide high torque
throughout the full working
range. HT arms are ideal for
tool carrying applications
such as forks and grapples.
The HT design comes in both
standard and super high lift
configurations, allowing the
machine to load high sided
bulk trailers and to stockpile
materials.
Traditional Z-bar linkage
arms are designed to provide
maximum breakout forces,
ideal for extraction applications. Again, the Z-bar set-up
is available in standard or high
lift for truck or hopper loading.
All loader arm options can
be ordered with two, three,
or four-spool hydraulic valve
options to work up to two
auxiliary controls simultaneously. Flow rates can also
be fine-tuned through the
in-cab display using the rotary
control to meet attachment
demand. Quick-hitches are
available for both Z-bar and
HT loader arms.
The 457 is available with
t hree a x le opt ions a nd a
range of tire combinations.
There are standard, limited
slip and automatic locking
differentials which deliver
optimum performance on all
types of ground.
July 6, 2015
www.equipmentjournal.com
B15
|
Tier 4 Final Compact Wheel Loaders Increase
Jobsite Versatility, Claims Manufacturer
Boasting a robust design and
good maneuverability, Terex
compact wheel loaders, ranging from 23 kW to 76 kW (50 hp
to 101 hp), are built to excel
in challenging applications,
from general construction,
earthmoving, and agricultural
work to specialized tasks such
as landscaping, utility, and
municipal work.
E q u ipp e d w it h T ie r 4
Final Deutz engines, these
compact wheel loaders offer
North American contractors
maximum productivity on
many jobsites thanks to their
step-less speed. In addition,
up to 90% of the maximum
torque is available at start-up.
This type of transmission,
which replaces more traditional mechanical drive
transmissions, provides high
efficiency, economical output
to reduce fuel consumption
without sacrificing power,
explains Terex.
Terex compact wheel loaders are also equipped with a
variable-flow hydraulic system
that allows operators to perform several work cycles, such
as lifting the bucket without
compact wheel loader range,
operators can quickly and
precisely lift loads to height
without constant readjustment
of the load angle. This feature
allows operators to focus on
accurate load placement, while
increasing work cycle times for
loading and unloading in the
second row of the truck.
Further, efficiency gains
come from the Terex Smart
Control operating system
which makes it much easier
for the operator to configure
the machine precisely to an
application. Similar to menu
guides on smart phones, operating the Terex Smart Control
system is very intuitive.
W it h i n t he cab, a new
dashboard display provides a
better at-a-glance of machine
operation information, while
the multi-function joystick
comes with an electro-proportional control circuit and
a slow/fast key for precise
handling.
The keypad has extra-large
keys for easy operation and
all the fuses and relays are
now mounted inside the cab
for additional protection.
Automatic power shift and
Terex fingertip controls help
to further simplify operation
for drivers, allowing them to
concentrate more on the task
at hand.
A full range of attachments
are available for use with
Terex compact wheel loaders,
including buckets, rippers,
fork lifts, load hooks, object
handling, sweeper, snow
blades, and salt spreaders.
Terex offers a quick-attach
system on its compact wheel
loaders so these machines can
be quickly adapted to work in a
wide variety of applications.
5 St. Regis Crescent North
Toronto, ON M3J 1Y9
Fax: 416.638.2272
info@rapid-rents.com
Stoney Creek Location:
Call 905.643.9455
WE DON’T JUST MOVE DIRT
FOR OUR CUSTOMERS!
WE HELP THEM REACH
FOR THE SKY!
RENTAL SPECIALISTS FOR 35 YEARS
Visit www.rapid-rents.com for complete list
416-638-7007
of rentals at great prices!
Terex compact wheel loaders only use power where it is needed the most.
steering and hydrostatic drive
systems, parallel kinematics
and Terex Smar t Cont rol
System.
The articulated steering on
Terex compact wheel loaders
gives these machines a turning
capability of up to 40 degrees
and helps the loader bucket
maintain movement toward
the material even at full steering angle. This features provides operators with increased
flexibility when picking up
or positioning loads. These
loaders’ oscillating rear axle
design, which means t he
operator always has the weight
of the machine going in the
same direction as the bucket,
provides a 12-degree swing
angle and keeps all four wheels
in contact with the ground,
which gives operators more
ground pressure when pulling
backwards, while operating
on uneven terrain.
Terex compact wheel loaders only use power where it is
needed the most, resulting in
responsive, demand-driven
and intuitive operation with
less fuel consumption. The
closed-circuit hydrostatic
drive provides a high power
output per unit mass and
has infinitely variable and
Power to go...
BIG!
1911-214C EJ 10.25x2 BW.indd 1
slowing down the machine,
at once. Permanent all-wheel
drive and an automatic limited
slip differential in the front and
rear axles for optimal traction
when travelling and moving
materials also come standard
on the Terex units.
With parallel Kinematics
as standard across the Terex
FOR SALE
Introducing the new WA470-8
272 HP, 55,579 lbs, 5.75 cu.yd.
•
•
•
855 Cedar Rapids Commander
Jaw/Roll Crusher.
30/30 rolls. 12.42 Jaw prescreener,
4/14 screen deck solid front conveyor, hydraulic landing gear, extended
goose neck, Cat powered. $120,000.
175-C Michigan Rubber Tired
Loader 29.5 29 tires, 5 yard bucket
with bolt on edges & teeth. Good
working unit.
$25,000.
C:(905)
852-8094
o:(905) 852-7572
Power to go...
BIGGER!
Tier 4 Final
6% less fuel than
Tier 4 Interim
Lock-up TC in
2nd, 3rd & 4th
Talk to a Komatsu owner today and see what you’ve been missing...
Toronto: 1-800-268-0679 Ottawa: 1-800-463-7011 London: 1-800-959-5516 Sudbury: 1-800-334-5154
www.essltd.com
Power to go...
BIGGEST!
After Hours Phone # 1-866-858-4349
Small projects to large facilities, Sommers rental generator
systems deliver the power you need, when you need it.
• Mobile & skid-based systems up to 1 MW
• Canada’s largest privately
held inventory in stock
• On call 24/7 anywhere in Ontario
Call the Power Line at
1.800.690.2396
www.sommersgen.com
2015-01-27 10:58 AM
B16
|
July 6, 2015
FULL PAGE AD TEMPLATE
10.375” x 15.25”
www.equipmentjournal.com
Lokotrack
MOBILE CRUSHING AND SCREENING PLANTS
LOKOTRACK LT220D COMBINATION CONE CRUSHER AND SCREEN
ALL MODELS ARE IN STOCK, READY TO WORK DURING CONSTRUCTION SEASON. CALL FOR DETAILS.
LOKOTRACK LT106 JAW PLANT
LOKOTRACK LT200HP CONE PLANT
LOKOTRACK LT1213 IMPACTOR PLANT
LOKOTRACK ST272 MOBILE SCREEN
LOKOTRACK ST3.5 MOBILE SCREEN
LOKOTRACK ST3.8 MOBILE SCREEN
CALL TODAY FOR MORE INFORMATION OR TO REQUEST A QUOTE
416-514-4751
1-800-268-1965
FOR ALL PARTS INQUIRIES CALL TOLL FREE PARTS
1-888-447-2787
July 6, 2015
www.equipmentjournal.com
The Cummins Redefining
Tour Stops in Toronto
Throughout this summer and
early fall, Cummins is showcasing the company’s technology
in a major road show across
North America, stopping in
dozens of cities along the way.
On June 24, the tour stopped
at the Cummins Toronto location.
The Redefining Tour is a
chance to experience in person how Cummins is redefining efficiency for the entire
trucking industry, and find
out from Cummins experts
how the company’s advanced
technology can add value to a
business.
The fleet consists of five
Cummins-powered tractors
with trailers. You’ll be able to
see our 2015 ISX15 engines
across a range of horsepower
ratings including the ISX15
SmartAdvantage Powertrain,
along with pre-production 2017
ISX15 engines in Class 8 trucks.
These trucks will be running
with the full array of technological advances including ADEPT
and Connected Diagnostics.
At each stop attendees
have the opportunity to walk
The Cummins Toronto location is one of the Power Stops on the Redefining
Tour, which means the location displayed additional Cummins-powered
diesel and natural gas equipment
through the Cummins show
trailer, which showcases the
latest in Cummins technology.
Hardware displays include
the 2017 ISX15 engine with
Single Module aftertreatment
system as well as the current
ISB6.7 along with the Cummins
Westport ISX12 G natural gas
engine. Technology such as
ADEPT, the SmartAdvantage
Powertrain, Connected Diagnostics, and more will be also
displayed digitally.
RENT ME
Various Sizes Available
1-800-268-0182
info@aldenequipmentinc.com
S A L E S • R E N TA L S • P A R T S • S E R V I C E
British Columbia
We’re Here To Serve You!
Tallman Truck Centre Hosts
10th Annual Open House
Tallman Truck Centre hosted
their 10th annual open house
at the company’s Ottawa facility. The event was very well
attended with more than 500
people in attendance.
Tallman Truck Centre sells
B17
|
CUBEX Limited is your new, authorized LeeBoy and Rosco
dealer in British Columbia. We know LeeBoy and Rosco.
We’ve been their experienced dealer in Manitoba.
and services new and used
International Trucks, Autocar
Trucks, Isuzu Trucks, Trout
River live bottom trailers,
Cobra and Fontaine trailers,
Kalmar Ottawa shunt tractors,
and Bobcat equipment.
Thank You &
Congratulations
to Steve of
SS Asphalt Paving Ltd
in Surrey, BC on your new
LeeBoy Paver!
SS Paving is a leading paving and
maintenance contractor in Vancouver and the
Fraser Valley with over 50 years experience.
SS Paving specializes in laying new
driveways for home owners as well as
parking lot paving for commercial and
industrial properties. They provide asphalt
maintenance services to damaged and
cracked areas including potholes, sinkholes,
drains. They also offer many services to
general contractors such as trenching, saw
cutting and road cutting.
A group photo of Tallman Truck Centre staff.
SS Paving’s Steve (owner) and his son Skylar (operator)
“2 jobs down, 1 million to go!”
CUBEX is also a proud distributor of Dynapac compaction equipment, Roadtec paving equipment and Road Widener Skid Steer Attachments.
MORE BRANCHES TO SERVE YOU BETTER
7423 Wilson Avenue
Delta, BC
V4G 1E5
1-877-462-8239
www.cubexltd.com
Kevin Tallman, President and founder of Tallman Truck Centre, poses for a
picture with customer Michel Bercier, owner of Remorques St.-Isidore Trailers.
9304 Horton Rd SW
Calgary, AB
T2V 2X4
403.258.1544
Fax: 403.253.0164
850 Rue Boucher
Saint-Jean-Sur-Richelieu, QC
J3B 7Z8
450.349.5846
Fax: 450.349.4155
11720 181 Street Northwest
Edmonton, AB
T5S 1M6
780.482.1541
Fax: 780.489.1545
189 Garden Ave
Brantford, ON
N3S 0A7
519.770.0216
Fax: 519.770.4083
42 St Paul Blvd
Winnipeg, MB
R2P 2W5
204.336.0008
Fax: 204.336.0009
Connect with us!
B18
|
July 6, 2015
www.equipmentjournal.com
New Hires, Appointments & Other Staff Changes
RITCHIE BROS. APPOINTS
SHARON DRISCOLL CHIEF
FINANCIAL OFFICER
Ritchie Bros. is pleased
to announce t hat Sharon
Driscoll will be joining the
company as Chief Financial Officer, effective July 6,
2015. Sharon will have a key
role on the executive team,
par t nering w it h t he CEO
and regional business unit
leaders to reinvigorate growth
in revenue, earnings and cash
flow. In particular, she will
focus on driving initiatives
ALL MAKES
ALL MODELS
AUTHORIZED
DISTRIBUTOR
POWERTRAIN SPECIALISTS
TRANSMISSIONS - AXLES - STEERING
PARTS - EXCHANGE - REBUILDS
TARTEN EQUIPMENT LIMITED
6199 Shawson Drive Mississauga, ON L5T 1E5
Phone: 905 670 1704
Fax: 905 670 4790
Toll Free: 1 888 670 1704
WWW.TARTEN.COM
COMMITTED TO SERVICE EXCELLENCE SINCE 1976
to optimize the balance sheet
with an emphasis on capital
allocation, capital structure
and improving Return on Net
Assets to enhance shareholder
value.
“We’re very excited to welcome Sharon, a highly accomplished CFO, to Ritchie Bros.
Sharon’s business acumen,
strategic thinking capabilities,
M&A expertise, and significant
experience in capital allocation
in multi-unit businesses will
make her an outstanding business partner in our journey to
execute the strategic plan and
deliver the evergreen financial
model over the long term,” said
Ravi Saligram, Chief Executive
Officer. “With a team-oriented,
collaborative approach to
management and a talent for
coaching future leaders, I’m
confident Sharon will foster an
even better understanding of
financial metrics and drivers
throughout the company, and
Groeneveld Automatic Lubrication System
Your Efficiency is our Challenge!
G R O E N E V E L D L U B R I C AT I O N S O L U T I O N S
A DIVISION OF GROENEVELD INTERNATIONAL
•
•
•
•
Reduced Repair and Maintenance Costs
Increased Uptime and Productivity
Reduced Grease Consumption
Professionally Installed by Our Own
Technicians or Certified Distributors
Tel: 1.800.263.1760 Visit www.groeneveld-group.com
REID
Sales,
Rentals, Leasing
& Financing.
E Q U I P M E N T S O L U T I O N S LT D
MISCELLANEOUS
LOADERS
CAT 988B RAD, reconditioned c/w tanks. $3,000.
KETO 150 Processor c/w updated controls,
computer ................................................ $8,500.
SPECIAL - STAINLESS STEEL & BUILD UP ROD
FORESTRY
for buckets, etc. Brand new - in the box 1,000 lb
HYUNDAI R130, w/hyd. forestry head .. $35,000. for ......................................................... 1/2 Price
TJ 380, grapple & line skidder, blade .. $19,000. MORBARK 600 HP horizontal chipper .........CALL
CAT 416B TLB, 4x4, E-stick, cab w/heat $23,000.
CAT 931 ............................................... $12,000.
unit heads to improve sales
productivity. McLeod will
continue reporting directly
to Ravi Saligram, CEO.
STRONGCO HIRES NEW
NATIONAL USED EQUIPMENT
MANAGER
Sharon Driscoll, Chief Financial Officer, Ritchie Bros. Auctioneers.
enable our business to deliver
superior results.”
Sharon is a Chartered Professional Accountant and has
a Bachelor of Commerce (Honours) degree from Queen’s
University. She will be based
in Vancouver, and will report
directly to Ravi Saligram, CEO.
Related to this announcement, Ritchie Bros. is pleased
to announce that Rob McLeod,
CFO since 2008, will take on
a new role as Chief Business Development Officer.
McLeod’s diversity of experience within Ritchie Bros.
will be invaluable in pursuing
the company’s new corporate strateg y. Specifically,
McLeod will be in charge of,
and instrumental in, Ritchie
Bros.’ M&A strategy—both
in the evaluation of potential targets and the eventual
execution of the acquisition,
as well as the integration of
new businesses into Ritchie
Bros.’ suite of services.
In addition, McLeod will
provide oversight to global
sector champions for the agricultural, transportation and
oil and gas sectors to drive the
transfer of best practices across
geographies to accelerate priority sector penetration. He will
also oversee sales operations
and sales support functions
and partner with business
3412 Thomas St.,
Innisfil, Ontario
416-417-4997
Shop: 705-431-8627
Fax: 705-431-8048
reid.equipment.solutions@gmail.com
Call Doug Reid today.
EXCAVATORS
5-KOMATSU PC400LC-8 .............................. CALL
6-KOMATSU PC300 HD7 ............................. CALL
CAT 235 .........................................................POA
CAT 235B .......................................................POA
CAT 350 .................................................$65,000.
4-CAT 365B, (1) 1999, (2) 2000, (1) 2003 models
.................................................... PRICED RIGHT!
1994 KOMATSU PC650LC-5, new u/c, rebuilt
engine, excellent condition .....................$90,000.
FORKLIFTS
USED 20’ & 40’ CONTAINERS
5,000 lb. CAT C5000 .............................$7,000.
6,000 lb. CLARK, dual wheel pneumatic $8,000.
15,000 lb. CLARK, ..............................$10,000.
5,000 lb. TCM FHG25, c/w forks, carpet roll,
attach. ....................................................$7,500.
5,000 lb. TOYOTA, 2004, penu. tires, certified
.............................................................$15,000.
Just off service, wind & water tight, excellent
condition.
20’ from .................................. $1,900 to $2,500. SKID STEERS
40’ from .................................. $2,900 to $3,500. BOBCAT 553 ............................................$8,000.
BOBCAT 943 .........................................$10,000.
ATTACHMENTS
OFFICE TRAILERS
(2) 30’ to 40’..................................from $2,000.
COMPACTOR
CRANES/DRAGLINES
2004 CHAMPION 8410 Superpac, padfoot
..............................................................$57,000.
(2) B.E. 650, 15 yard, complete, parts available
HAMMERS 972 – GP.................$4,000.
................................................................... CALL
from 1,000 to 10,000 ft./lbs. PC400 – 48” ...........$6,000.
RAPIER W2000, 45 yard, complete, parts avail............................ Call JD792 – 30”, like new
SHEARS – LaBounty
................................$6,000. able. ........................................................... CALL
UP40, 50, MSD70, UP90,
MSD100R, MSD220 ..... Call
GRAPPLES – New PC400/
EX400/235 HD ......$16,000.
BUCKETS 225 – 42”... .............$4,000.
235 – 42”, 48”, 66”, 72”
from ........................$5,000.
245 – 72” HD........$10,000.
235 – A/B/C booms $9,000.
235 – A/B/C/ sticks .$8,000.
235 – A/B cabs w/controls
...............................$6,000.
235 – front shovel complete
..............................$25,000.
769B – box & hoist cylinder.
..............................$10,000.
977L – EROPS ........$5,000.
CRAWLERS
CAT D6H ........................................................POA
CAT D6M XL...................................................POA
CAT D8R, S&T, ROPS...........................$125,000.
CAT D8K, hi-HP, ripper, cab, refurbished ..... CALL
CAT D8K.................................................$55,000.
DEERE 450G ..................................................POA
CRUSHING/STACKER
18 X 36 JAW .............................................. CALL
24’ x 80” radial stacker ......................$20,000.
NOW WRECKING FOR PARTS
• CAT D8H 46A• KOMATSU PC1000 • VOLVO A25
• S24B TEREX SCRAPER s/n 27709, front diff.
complete, 2 ride cyl., 2 lift cyl., 2 apron cyl., 1
dejector cyl., (3) 37.5x33 tires.
St rongco is pleased to
announce J.J. Lyons as the
company’s new National Used
Equipment Manager effective
June 1, 2015. Lyons started his
career at Strongco in 2013 as
a Territory Manager in the
Greater Toronto Area.
Prior to joining Strongco,
Lyons worked at Westmetro
Equipment as a Territor y
Manager and then as a Sales
Manager with a focus on used
equipment.
J. J. Lyons, National Used Equipment
Manager, Strongco Equipment.
HAVER & BOECKER ROCKY
MOUNTAINS EXPANDS &
MOVES
Haver & Boecker Rocky
Mountains, announces an
expansion and relocation. The
facility moved its service center
on May 15 from Chilliwack
to Kamloops, British Columbia, and welcomed Darcy
Fredrickson as an additional
Sales Manager to better serve
western US and Canadian
customers.
Haver & Boecker Rock y
Mountains also now serves
as the exclusive distributor
for Major Wire Flex-Mat 3 in
British Columbia.
“The addition of Darcy,
as our Sales Manager, will
provide our customers and
sales team with a wide variety
of support, from equipment
servicing to parts availabilit y,” said Markus Kopper,
Darcy Fredrickson, Sales Manager,
Haver & Boecker Rocky Mountains,
Hav er & B o e c k er Ro c k y
Mountains General Manager.
“This allows us to provide new
and current customers continued fast response and yet
it positions us for additional
growth in the region’s mining
industry.”
Haver & Boecker Rock y
Mountains serves aggregate,
mining and industrial mineral
producers in Alaska, Idaho,
Oregon and Washing ton,
as well as British Columbia,
Northwest Territories and
the Yukon. The new location
will continue to provide the
equipment rebuilds, sales
and ser vice for which the
company is known.
The move and expanded
territory is possible with the
recent addition of Fredrickson
as a certified sales manager.
Fredrick son brings more
than 17 years of direct sales
experience to this role and
will assist Kopper in attending
to customers throughout the
region from assisting existing clients to acquiring new
business.
In addition to Fredrickson,
the regional growth includes
greater product availability,
including Major Wire FlexMat 3 self-cleaning screens,
which are constructed with
i ndependent ly v ibrat i ng
wires bound with polyurethane. Each screen will ship
the same day from Haver &
Boecker’s Edmonton facility
if ordered by 11 a.m. PST.
And, Haver & Boecker Rocky
Mountains will work closely
with customers to develop
lists of critical items to stock
for quick availability and to
minimize downtime, Kopper
added.
E Q U I P M E N T S E R V I C E S LT D .
NEED PARTS and SERVICE
for HYDRAULIC BREAKERS
BTI (TELEDYNE)
S COPCO
ALLIED ATLA
ILLAR CHICAGO PNEUMATIC
CATERP
O
INDEC
NPK
ESCO
KENT(FURAKAWA)
OKADA
ROCK RAM
EURORAM
STANLEY
ER
RAMM
TRAMAC
AND OTHERS. We can Help...
www.hydrolexc.com
416-458-2334
Fax: 905-729-4213
July 6, 2015
www.equipmentjournal.com
“The position is an ideal
fit for me because the values
of Haver & Boecker align
closely with mine when it
comes to customer service,”
Fredrickson said. “It’s a top
priority. Whether we have to
fly or drive to meet a customer
for servicing, we will be there
at the drop of a hat.”
Fredrickson and Kopper
said they are excited and
ready to meet the expanding needs from customers
in mining and agg regate
operations throughout the
Rocky Mountains region.
“The additional sales staff,
coupled with the new location
and expanded product offerings, will allow us to better
ser ve our customers w ith
durable and efficient screening and material processing
solutions,” Kopper said.
Haver & Boecker Rock y
Mou nta i ns is one of t wo
corporations under Haver &
Boecker Canada, part of the
global Haver & Boecker family. Haver & Boecker Canada
strives to localize sales, parts
and service through regional
offices and factories in North
America, with the overall goal
of keeping flexibility, speed,
B19
|
warranty, and training teams management positions with a
“I am very pleased to have HYUNDAI CONSTRUCTION
parts readiness and customer
that support the company’s global manufacturer of conRob join our team as Director, EQUIPMENT AMERICAS
service as top priorities.
dealers and customers.
struction and forestry equipMarketing and Communica- APPOINTS ERNESTO LOPEZ
LBX COMPANY ANNOUNCES tion. As LBX continues to grow AS SERVICE MANAGER
Lopez joins Hyundai Con- ment and a leading equipment
DIRECTOR, MARKETING AND in North America and Latin
Hyundai Construction struction Equipment Americas rental company.
COMMUNICATION
“Ernesto Lopez is a valuable
America, Rob’s leadership Equipment Americas, Inc., has after serving for seven years
LBX Company, maker of Link- and broad, experience in announced the appointment as Director of Product Sup- addition to our team at HyunBelt excavators has announced our industry make him well of Ernesto Lopez as Service port Operations for a leading dai,” said M.S. Kang, President,
that Rob Orlowski has joined suited for the job,” stated Eric Manager – Construction Equip- construction equipment Hyundai Construction EquipLBX as Director, Marketing Sauvage, President and Chief ment. In his new role, Lopez manufacturer. His 20-plus-year ment Americas, Inc.
and Communication.
Executive Officer.
manages the HCEA service, career in the industry includes
Prior to his most recent
role as Product Ma nager
AMS
for Excavators at Komatsu
Aggregate Screening
Equipment
America Corp., Rob spent 14
years with CNH in various
ANTRAQUIP
Cutter Attachments
sales and marketing roles in
construction equipment, after
BLAXTAIR
Pedestrian Detection
sales and financial services,
System
including Marketing Product
BROCE
Manager-Global Telematics,
Self-Propelled Brooms
Market Intelligence Manager,
will INCREASE your Productivity and LOWER your costs!
CIMLINE
and Business Development
Pavement Maintenance
Group
Manager.
DURA
PATCHER
After graduating from the
The Power Curber
Spray Patcher
University of Wisconsin, Rob
5700-C with a Cummins
EDGE
started his career at American
Aggregate Equipment
130
HP
engine,
combines
Society for Quality Control as
ETNYRE
horsepower with easy
Asphalt Distributors
a bilingual Customer Service
& Chipspreaders
Representative, and continhandling for speed.
FALCON
ued with Briggs & Stratton
Road Maintenance
5700-C features
Equipment
Corporation in International
Operations.
GLOBAL
include:
SWEEPING
Rob is fluent in Spanish and
• auger lines up in front
Mechanical Street
Portuguese, and has good
Sweepers
of machine for single
knowledge in Mandarin.
GRADALL
Ken Lund
(416) 801-6014
k.lund@sympatico.ca
www.LundAppraisals.ca
USPAP (Certified)
CPPAG (Accredited)
...
lane pours
• more water, and fuel
capacity
• left and or right pour
options
• choice of control
systems
5700-C
Telescopic Boom
Excavators
• 2’ radius capability
• cast auger feed
• offset mold for better
positioning
• Quick-Attach mold
• trim and pour at same
time
• Stringless ready Call for details.
JOHNSTON
Street Sweepers
KPI - JCI
Crushing, Screening, Washing
& Conveying
KUEPER
Plow Blades
SCHMIDT
Rear Discharge
Spreaders
AMACO EQUIPMENT
TECWEIGH
5804 Datsun Rd., Mississauga, ON L4W 1H2
Phone: 289-247-1057
Fax: 905-670-3446
Belt / Scales
www.amacocei.com
Equipment Appraiser
TIGER
BOOM/ROTARY/FLAIL MOWERS
JULY 6th, 2015
905-852-8094.................................................................. B15
Advance Construction Equipment Limited ......................... A9
Alden Equipment Inc. ........................................... A1, A3, B17
Allu Group Inc. ................................................................... A5
Amaco Construction Equipment Inc................................. B19
Attachment World Inc. ....................................................... B8
BEC Equipment .................................................................. A8
Beka-Lube Products Inc..................................................... B7
Bobcat Dealers ................................................................ B11
BPT Components Inc. ....................................................... B14
Brandt Tractor Ltd. ........................................................... A18
Brandt Value Parts ............................................................. B5
Case Dealers...................................................................... B6
Central Diesel Service ..................................................... B10
Colvoy Equipment .............................................................. A5
Conderoc Inc. ............................................................. A1, A17
Cooper Equipment Rentals ................................................ A1
Country Air & Repair ........................................................ A10
Creighton Rock Drill Limited ............................................ A19
Cubex Limited .................................................................. B16
Eagle Equipment Sales/L.A.K.E.S. Leasing Corp. ............... A1
Economy Auction Services and
Equipment Sales (Ontario) Limited .................................. A21
Equipment Sales & Service .......................................A1, B15
FDS Equipment ................................................................ A10
Gear Equipment ............................................................... B13
Groenveld ........................................................................ B18
Hammond Air Conditioning ................................................ A8
Harding Equipment Inc. ................................................... A16
High Reach Inc. ................................................................ A10
Hub Equipment ............................................................... B20
Hydrolexc Equipment Services Ltd. ................................. B18
Hyundai Dealers ................................................................ B5
Jade Equipment Company Limited .................................... A6
JCB Inc....................................................... A7, A14, A23, B12
John Deere .............................................................. A12-A13
Kawasaki KCM ................................................................... A4
Kobelco Construction Machinery USA ............................... B4
Kubota Power Generators ................................................ A19
Loadstar Trailers .......................................................... A1, A9
Lund Appraisals Inc. ........................................................ B19
M-K Power Products Corp. ................................................ A8
Magnum Attachments ....................................................... A1
Manulift EMI .................................................................... B10
Marcel Equipment Limited........................................... A1, A6
McDowell B Equipment Ltd. ........................................ A1, B8
Moore JCB ....................................................................... A22
Morgan’s Diesel Truck Parts Inc....................................... A15
Nortrax Canada Inc. ........................................................... A3
Ontario Control Cables ..................................................... B10
Pine Ridge Lisco Edwards ............................................... B14
Powerscreen of Canada Ltd............................................... A2
Rapid Equipment ............................................................ B15
Reid Equipment Solutions Ltd.......................................... B18
Screen Machine Industries .............................................. A17
Shaw Bros.Quality Attachments ........................................ A2
Shell Rotella....................................................................... B9
Sommers Motor Generators ............................................ B15
Strongco Corporation ...................................................... A11
Tarten Equipment Limited........................................ A17, B18
Telsmith Inc. ...................................................................... B3
Terex Dealers ................................................................... A21
The Gear Centre ............................................................... B12
Toplift Enterprises .............................................................. A1
Toromont CAT.......................................................A5, B1, B16
Toronto Tracparts Ltd. ...................................................... B12
Trailers Trailers .................................................................. B7
Tramac ............................................................................. A14
Tri-City Equipment ........................................................... B13
United Equipment Rentals ............................................... A20
Valley Blades Limited ...................................................... A16
CONTACTS
Editor
Nathan Medcalf
editor@equipmentjournal.com
Sales Representative
Tara Rosen
tara@equipmentjournal.com
General Manager
Mark Baker
mark@equipmentjournal.com
Creative Director
Ryan Chuhaniuk
ryan@equipmentjournal.com
Circulation Manager
Carla Hernandez
carla@equipmentjournal.com
AUCTION
BidSpotter Inc. ................................................................... A1
IronPlanet ........................................................................ A24
Hilco Industrial................................................................. A22
EMPLOYMENT
Jade Equipment Company Limited .................................... A3
PACE PUBLISHING LIMITED
6-5160 Explorer Drive
Mississauga, ON
L4W 4T7
Toll Free:
Phone:
Fax:
1-800-667-8541
(905) 629-7500
1-800-210-5799
B20
|
July 6, 2015
www.equipmentjournal.com
CAT 314DLCR (12) Q/C, aux. hyd., long stick, zero Cat 312EL (12) Q/C, Aux Hyd. 1600hrs, 28”
tail swing, low hours.
$129,000. pads, BTI breaker.
CAT 320EL (12) L/S, aux. hyd, wrist bucket, hyd. Cat 321DLCR (11) Q/C, 28” pads, aux. hyd., Cat 320DL (08) Q/C, L/S, aux. hyd., 2,550 hours.
thumb available, low hours
5,055 hours.
$127,500.
Since 1946
Arriving soon:
Cat 328DLCR (13)
zero tail swing, aux. hyd., L/S,
28” pads, low hours.
CAT 308ECR (12) Offset boom, Q/C, hyd. blade, CAT 336EL (14) with 60’ Pierce Pacific Long
LB 250X3 (13) 60’ long reach, low hours.
Reach.
For Rent Only
18” street pads, aux. hyd., 1,640 hours.
CAT D6TXW (12) EROPS, Ripper, PAT, 28” pads, CAT D6T LGP (13) EROPS, VPAT, winch, 3,114
hours.
3453 hrs.
(2) CAT D6T LGP (11-12) angle dozer, Cat
Ripper/ Winch, from 2600 hrs.
DEERE 700KLGP (13) 1709 hours, EROPS, winch (2) CAT D7E (10) EROPS 7SU Ripper, from 3140
PAT, 30” pads.
hours.
CAT 587T (09) 28’ boom, ROPS, 2150 hours, CAT D8T (11) EROPS, angle blade w/twin tilt, NEW CARCO 50BPS WINCH c/w Fairleads,
32” pads.
winch, ripper valve.
slow speed. Fits CAT D6N.
CAT 14M (12) EROPS, ripper, 20.5R25 tires, push KOMATSU HM300-2 (11) tier 3 EPA, tailgate,
block, low hours.
heated box, Michelin 23.5R25, low hours.
VOLVO A40F (13) tailgate, heated box, 29.5R25 VOLVO A30G (14) 750/65R25 tires, tailgate.
For rent only
tires, low hours, extended powertrain warranty.
(2) CAT 924H (11) EROPS, 20.5R25, Ride Control, CAT 938K (12) EROPS, 3rd Valve, 20.5R25, Q/C. (2002) IR 1070, CAT power, 1070 CFM @ 350PSI, (2) ROADTEC 2500D (07) Cat C9 power, auto.
from 2,464 hours.
lube, 5,500 hours.
approx 5,500 hours , good condition.
60 North Queen St.,
Toronto, ON M8Z ZC4
416-236-5425
hubequipment.com
Tom Stevenson
tom@hubequipment.com
After Hours: 416-402-2749