MobiCool Leaflet

MOBI-COOL
Stand alone high pressure fog/misting fan
Eurocooling is pleased to introduce, MOBI-COOL, a stand-alone high-pressure, low-noise
four nozzle fog-mist cooling fan. Thanks to the built-in pressure pump system, MOBI-COOL is
capable of mixing atomized water to the airflow, thus producing the mist cooling effect.
MOBI-COOL allows you to finally enjoy your outdoor entertaining areas even on the hottest
summer day, all integrated into one very effective mobile cooling system with a high
capacity water tank that allows up to 5 hours of autonomy.
MOBI-COOL is whisper quiet, it’s electrical QES motor and pump are very efficient, less than
55 dB noise emission. Therefore ideal for use in restaurants, outdoor entertaining areas,
concerts, events, workplaces etc.
technical features
• Professional high pressure aluminium head pump.
• 70 bar (1000psi) working pressure.
• 3 heavy duty stainless steel plungers.
• Variable flow rate, built-in bypass.
• Safety valve.
• Heavy duty industrial 240 volt single phase, 550W self-ventilated motor.
• Thermal overload protection.
• 60 litre internal water reservoir.
• Electric in tank float switch to protect pump against dry running.
• OFF/FAN-ON/FAN & MISTING ON switch.
• Weight balanced & integrated wheels & handle for easy manoeuvrability.
• 55 dB(A) average noise level.
QES: units supplied with QES low noise motors (Quiet Engine System) are particularly
preferred in resorts, swimming pools, bars, restaurants, hotels, where noise may
disturb your guests.
BPS: all units are equipped with a By-Pass System (built-in-pass valve), recirculating
the water inside the pump, preventing the pump overheating. Fog systems driven by
BPS fog pumps do not require any drain valves to empty the pipe so that no water is
wasted on the ground.
uses
Gardens, parks, verandas, beaches, public places, bars, restaurants, hotels, swimming
pools, factories, warehouses, shopping malls, pergolas, sport events, parties, ceremonies,
and any other area to be cooled.
Dimensions:
580 x 2050 x 580mm (W x H x D)
Weight:
50kg (empty water tank)
“Just fill up the tank with clean fresh water, plug-in, switch on,
kick back and be EURO COOL!”
Mr Nozzle
515 Cross Keys Road, Cavan SA 5094 PO Box 80 Dry Creek, SA 5094
Phone: 1800 012 123 Fax: (08) 8262 8199
TM
Email: info@mrnozzle.com.au www.mrnozzle.com.au
Prices and Specifications are subject to change without notice. E&OE.
Commercial & Industrial products…
Flexibility of Design
Eurocool’s extensive range & style of pumps, nozzles, fans & plumbing components
means every unit sold is custom designed for the optimum result. This flexibility of
design allows the Eurocool misting systems to be used for multiple commercial &
industrial applications e.g. Evaporative cooling for warehouses, humidification in
wine cellars, dust suppression & odour control in factories, just to name a few.
Misting Pumps
Eurocooling fog pumps are designed & built to the highest Italian quality. The series of professional
high pressure brass head pumps comprise of heavy duty ceramic coated pistons, internal bypass
valve, dry-run & thermal overload protection. The series ranges from 0.5hp, 240v single phase
0.6lpm to 5.0hp, 415v three phase 21lpm pumps. Capable of running from 4 to 260 misting nozzles
(depending on pump model) therefore catering for the smallest personal cooling unit to large
industrial cooling, humidification & dust suppression applications.
Misting Fans
The Eurocool mist cooling fan range offers many options & configurations,
all designed for high duty cycles for domestic, commercial and industrial
applications. The traditional oscillating pedestal & wall mount fans are available
in both 450mm & 635mm diameters depending on application requirements.
The “Eurojet” fan has been specifically designed to maximise cooling efficiency
& air flow whilst remaining whisper quiet therefore ideal for customer service
areas. Available in pedestal or ceiling mount. Eurocool’s latest release is
the MOBI-COOL portable mist cooling fan, capable of running up to 5 hours
autonomously due to the integrated pump/reservoir.
e u ro j e
t
Quality Components
The quality & design of Eurocool’s nozzles & fittings is what allows the flexibility & range of
application it can be used in.
Nozzles: Eurocool’s misting nozzles are available in brass or stainless & multiple sizes from 0.15mm
to 0.50mm. This allows control of volume therefore tailoring the units to applications from
evaporative cooling with minimal water consumption to suppression of dust with higher volumes.
Fittings: The “Push-lock” plumbing fittings & high density polyamide tube makes installation of the
units quick & hassle free.
Filters: All Eurocool kits come with the dual 1 & 5 micron filters reducing the risk of nozzle blockage
& increasing pump life.
Controllers: Eurocool’s optional range of controllers allows the user exact control of their specific
application. In-built timers can be set to cycle the frequency of misting for improved water &
electricity efficiency whilst maintaining optimal cooling effect. Humidity levels can be controlled
through Eurocool’s humidistat. Dosing units can inject scented fluids for odour control.
with EUROCOOLING possibilities are endless…
Distributed by:
TM