your drilling expert

Transcription

YOUR DRILLING EXPERT
www.halcorocktools.com
DRILL & BLAST CATALOGUE
United Kingdom
Halco Rock Tools Ltd
Armytage Road
Brighouse
West Yorkshire
HD6 1QF
Tel: +44 (0)1422 399900
Email: salesuk@halcorocktools.com
USA
Halco America LLC
2720 Fallon Drive
Sherman
TX 75090
Tel: +1 903-893-2300
Email: salesusa@halcorocktools.com
Halco Rock Tools
Quality Management System
is Certified to ISO9001: 2008
Certificate No: LRQ 0850659
Australia
Halco Australia
Dillington Pass
Landsdale WA 6065
Tel: +61 8 9303 9506
Email: salesaus@halcorocktools.com
South Africa
Halco South Africa
21 Harriet Ave
Driehoek
Germiston 1459
Shop No4
Johannesburg
Email: salesafrica@halcorocktools.com
V2. 2014
1881 Drill & Blast Cover 4pp.indd 1-2
03/06/2014 12:37
OUR COMMITMENT TO YOU
At Halco Rock Tools we pride
ourselves on providing exemplary
levels of customer service, support
and training no matter what your
drilling requirements are.
Having manufactured drilling
consumables for over sixty five years
our support team are well placed to
provide accurate and timely solutions
to optimise your drilling performance.
Halco Rock Tools is a world class manufacturer
of Down-The-Hole (DTH) drilling equipment with
locations around the globe, and headquartered
in the UK. Halco pioneered the development and
distribution of DTH hammers in the 1950s.
Produced for more than 65 years, our products
continue to be regarded as some of the most
reliable and durable available today. This is due to
our commitment to exceeding customer needs,
design expertise and rigorous product testing in
extreme drilling conditions.
The hammers and drill bits in this catalogue are
designed to offer optimum drilling performance
in Drill and Blast mining and quarry applications.
Additional hammers and bits are available for the
following applications:
• Construction
• Oil and Gas
• Exploration
We can offer training in hammer and bit selection,
service, maintenance and repair. With specialists
available at all of our locations, you‘re never
far away from the support you require. Halco‘s
superb team of engineers are only a phone
call away.
Further Learning Aids:
• A-Z of DTH Drilling
• Civil Engineering
• DTH Maintenance Manual
• Geothermal/Waterwell
• User Guide
• www.halcorocktools.com
2
QUICK REFERENCE GUIDE
HOLE SIZE
1"
"
2
"
3
4
5
6
"
"
"
"
7
"
8
HAMMER
SHANK
PAGE
DOMINATOR 10
HALCO 1
10-11
DOMINATOR 20
HALCO 2
12-13
DOMINATOR 375
MD 3.5
14-15
SUPER DOMINATOR 400
HALCO 4 / DHD 340A
16-17
SUPER DOMINATOR 450
HALCO 4
18-19
SUPER DOMINATOR 500
DHD 350R
20-21
SUPER DOMINATOR 550 HD
DHD 350R / QL 50
22-23
DOMINATOR 600
HALCO 6
24-25
SUPER DOMINATOR 600
DHD 360
26-27
SUPER DOM 650 HD QL 60
QL 60
28-29
DOMINATOR 750
SD 8
30-31
DOMINATOR 850
Ql 80
32-33
Your Drilling Expert
1881 Drill & Blast catalogue-02A.indd 3
3
03/06/2014 12:59
DRILL BIT OVERVIEW
What are “Down-The-Hole” Drill Bits
and how are they used?
“Down-the-hole” (DTH) drill bits are used with “Down-the-hole” hammers for
drilling holes through a wide range of rocks types. In conjunction with our
DTH hammers, our drill bits are designed with a splined drive for rotating the
bit in the ground. Drill bits are available in different sizes and configurations
so they can drill a wide range of hole sizes, in different ground conditions.
How have DTH drill
bits developed?
Applications FOR
Overburden Systems
Rapid advances in drill bit technology have
occurred throughout the last 40 years. The first
type of drill bits used with down the hole hammers
were “cross bit” design. Four chisel shaped
lengths of tungsten carbide were brazed into the
bit body. The action of brazing created stresses
within the drill bit thereby limiting its life. A further
disadvantage of the cross bit design was that the
majority of the carbide was situated around the
centre of the bit face and not towards the outer
edge of the drill bit where there is the most rock
to cut.
Soft soil is normally drilled with augers or by
the rotary method but DTH hammers have been
adapted to handle soft conditions by being able
to drill and case the hole simultaneously using
an concentric bit which can be withdrawn on
completion of the bore hole, leaving the casing in
situ, thus preventing hole collapse.
In the late 1960’s however, the button bit was
introduced, this was a landmark in the progress
of DTH equipment which led to bit lives previously
unheard of. The button bit design eliminated the
primary shortcomings of the cross bit.
“We guarantee to have
a drill bit that can tackle
any challenge”
Cylindrical button inserts are precision ground
to extremely close tolerances and pressed into
the drill bit as an interference fit. This resulted in
improved carbide insert retention by eliminating
brazing stresses and other defects associated
with brazing and braze materials. Button inserts
are distributed more efficiently than cross bit
inserts by providing more cutting power where it
is needed at the outer edge of the drill bit face.
In many cases, the need to sharpen the drill
bit was eliminated with the arrival of the button
bit and the improved cutting action provided
increased drilling rates particularly in hard rocks.
While the cross bit design is still used in some
rotary and drifter applications where the rock is
very soft, the button bit is now used in virtually
every DTH application.
4
03/06/2014 12:59
HEAD DESIGNS
DRILL BIT
SELECTION
GUIDE
As with Halco hammers it is crucial that
you choose the right drill bit otherwise
it will cost you both in time and money.
We pride ourselves on having a
comprehensive range of drill bits on
offer so you can be sure that you will
definitely find a suitable bit for any
project you are undertaking.
Our carburised drill bits are among the
best in the world providing outstanding
performance and durability.
We produce all our drill bits at our
specialized plant where they are made
out of high quality nickel chrome alloy
steel, carburised and heat-treated to
offer extra protection against wear and
fatigue. Every hole in the bit head is
machined to within microns and fitted
with carbide inserts which provide the
cutting action of the rock.
INSERTS TYPES
Flat Face
Ballistic Inserts
Alternative design for all rock
conditions especially fractured
and fissured rocks and changing
formations.
Suitable for soft and medium
compact low abrasive rocks
producing large cuttings. Not
suitable for badly fractured rocks.
Concave
Domed Inserts
Alternative design for all rock
conditions particularly deep hole
drilling can improve hole alignment
as a result of inverted pilot.
Strong rugged shape for high
performance and good service
life in all conditions particularly
suitable for very hard abrasive
rocks and deep hole drilling.
Convex
Semi-Ballistic Inserts
Strong design for all conditions
especially hard abrasive rock.Good
balance of fast drilling and long
service life.
Suitable for all soft and medium
rock conditions including fractured
and fissured rocks.
We have three different bit heads on
offer, Convex, Flat Face and Concave,
also with three different inserts we
guarantee we have a drill bit that can
tackle any challenge and rock face
formation. The two most important
factors in choosing the right drill bit are
productivity and reliability.
For soft to medium rock formations
where penetration rates are high the
ballistic and semi-ballistic inserts
coupled with flat face or concave bit
heads are more suitable.
If the rock formation is on the hard to
very hard side, it is more advisable to
use a domed insert with convex head
this will result in a longer drill bit life.
5
03/06/2014 12:59
(e.g. Granite, Basalt, Quartz)
Can be used but does
not result in optimum
productivity
Can be used with
satisfactory results
Ideally suited for
that formation
HARD ROCK
>150 MPA
Can be used with
(e.g. Slate, Dolomite)
Can be used but
does not result
in optimum
productivity
MEDIUM ROCK
100 - 150 MPA
Ideally suited for
that formation
Can be used with
Can be used but
does not result
in optimum
productivity
(e.g. Limestone, Sandstone, Shale)
Can be used with
SOFT ROCK
<100 MPA
Ideally suited for
that formation
Ballistic
Inserts
Semi
Ballistic
Inserts
Domed
Inserts
DRILL BIT INSERT GUIDE
6
03/06/2014 12:59
HALCO MAINTENANCE KITS
Here at Halco we pride ourselves on
our commitment to fully supporting
every project right until completion.
Every driller always wants to get the maximum level of
production from their drilling tools, and we ensure this
through our exceptional technical and service support.
Using Halco service, repair and life kits can further your drilling
production rates and prevent down time when it matters most.
We have implemented three different maintenance levels to ensure that
you get the right level of support at the right cost. These range from a
basic service right through to a full overhaul repair of a hammer.
Benefits of Halco
maintenance kits
- Increased hammer life
- Improved drilling rate of
penetration
- Prevention of lost time
- Ease of maintenance
- Ability to repair
hammer on site
SERVICE KIT (SK)
Halco service kits are recommended for routine maintenance,
providing an easy and convenient method for replacing essential
consumable items. Extending hammer life and ensuring that they are
available when you need them.
Service Kit Contents: Snap Rings, O’ Rings, N.R.V. Springs
REPAIR KIT (RK)
In applications where longer term hammer usage or multiple hammers
are in service, the Halco repair kits offer additional protection.
Providing key replacement components in addition to those of the
relevant service kits. These kits are ideal for drilling projects in remote
locations where performance up-time is critical.
Repair Kit Contents: Chuck, Snap Rings, O’ Rings, N.R.V, N.R.V.
Spring, Bit Guide Bush
LIFE KIT (LK)
When drilling in highly abrasive ground conditions a Halco life kit
is used to replace the external hammer parts that become worn.
Extending hammer life and ensuring optimum productivity.
Life Kit Contents: Top-Adaptor, Cylinder and Chuck
Halco Recommended Maintenance Levels
Maintenance Level
Basic
Intermediate
Extensive
Rock Formation
Hammer Life
Required Kit(s)
None Abrasive
> 10,000 m
SK
Medium Abrasive
5,000 - 10,000 m
RK
Highly Abrasive
< 5,000 m
LK
7
03/06/2014 12:59
HAMMER SELECTION GUIDE
Choosing the right hammer is essential
to your productivity and operating cost.
All Halco hammers are built to last and manufactured to an exceptional
standard. Our hammers provide the outstanding performance and productivity
expected by drillers worldwide.
Versatility and variety are key to Halco products and you can be assured that all Halco hammers are
suitable for a wide range of rock drilling applications.
Every hammer is constructed at our state-of-the-art manufacturing plant using the highest quality heat
treated nickel chrome alloy steels. Our processes meet the requirements for ISO9001:2008 standards.
It is a Halco imperative that every hammer we produce surpasses our customers expectations and we’re
constantly striving to improve our service and product quality.
Our hammer range includes:
MACH RANGE
DOMINATOR RANGE
This is a proven hammer that has been around
for over 35 years. Designed for all kinds of drilling
conditions but excels in overburden drilling due
to the high frequency with less blow energy,
particularly unstable ground conditions. This
hammer can drill smaller diameters than the
standard range. This range of hammer is ideal for
civil engineering applications.
The Dominator is a higher performance hammer
ideally suited for medium to higher air pressures
in blast-hole applications.
GP RANGE
RC RANGE
The GP series of DTH hammers from Halco Rock
Tools offer breakthrough performance across
some of the most challenging applications. The
robust non ported piston design dramatically
improves drilling performance when operating
under a column of water.
The Halco reverse circulation (RC) product
range has been designed to give maximum
performance in Exploration and Grade Control
applications. Unlike standard DTH hammers, RC
hammers return the rock cuttings back to the
surface through the internals of the hammer and
drill string. Geologists worldwide trust Halco RC
products to help them explore prospects and
identify mineral lithologies.
A built in choke facility allows the driller to adjust
the volume of air through the hammer to optimise
cuttings evacuation. These hammers are suitable
for operation at air pressures up to 30 bar (435
psi).
This design is simple with fewer components,
which makes servicing and on-site maintenance
easy. With a range of heavy duty models on offer
this extends the life of the hammer considerably.
The integral adaptor housing allows easy access
to the long lasting sample tubes. The enhanced
performance stems from a simple design that
reduces complicated maintenance procedures,
providing less down time and lower drilling costs.
8
03/06/2014 12:59
Our specifically designed high
production blast-hole hammers
are simple, robust and have very few
parts, making them both user friendly
and reliable.
PRODUCT FEATURES INCLUDE:
Their outstanding performance ensures that any
drilling project undertaken gets done in a fraction
of the time, resulting in lower cost per foot drilling.
All our high performance hammers are built at
our state-of-the-art lean manufacturing plant
using the highest quality heat treated nickel
chrome alloy steels and processes that meet ISO
9001:2008 standards.
• Designed for working at high pressures of
up to 435psi (30 bar)
• Simple design with no make-up required
• External non-return-valve for easy
inspection and service
• Heavy duty reversible cylinder for extended
hammer life
9
03/06/2014 12:59
1
DOMINATOR 10
AT A GLANCE
SIZE
55 - 64mm
(2 1/6 - 2 1/2“)
SHANK
Halco 1
AIR PRESSURE
100 - 250 psi
(7 - 17 bar)
DOMINATOR 10
One piece top-adaptor reduces
internal parts. No make up
required. External N.R.V. for easy
maintenance.
The Dominator 10 is designed for small diameter
drilling operations. Its superior drilling performance
makes it one of the fastest small hammers on the
market. The valveless design of the Dominator
10 provides high performance at both low and
high pressures. The Dominator 10‘s robust design
allows it to withstand heavy duty applications.
A non-return-valve (N.R.V) is fitted into the
Dominator 10 to prevent flooding where ground
water is present.
Suitable for operation at air pressures of
100 - 250 psi (7 - 17 bar).
Revised chamber volumes and cycle
timing to optimize performance.
Drilling diameters of 55 - 64mm
(2 1/8 - 2 1/2”).
Available Shanks
Halco 1
Simplified piston geometry for
improved balance and location
within the cylinder.
Air Consumption
Heavy duty cylinder for extended
hammer life.
350
300
CFM
250
200
150
100
50
0
100
150
200
250
300
350
400
450
500
PSI
Figures are based on theoretical data
10
03/06/2014 12:59
1
2
3
4
5
6
7
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Recommended Maximum Thrust
Dominator 10
600422
Halco 1
40 mm DIN 405 6 TPI BOX
38 mm (1.500")
7 kg
47 mm (1 7/8")
772 mm (30 3/8")
120 kg (264 lbs)
Description
8
9
10
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Dominator 10
Halco 1
600422
Description
Thread Protector
Snap Ring
N.R.V. Seat
O’Ring
N.R.V.
N.R.V. Spring
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
Bit Retaining Ring
Chuck Spacer
Chuck
Protective Cap
Maintenance Kits
Service Kit
SK80
2
2
2
2
2
2
1
-
Repair Kit
RK135
2
1
2
1
2
2
2
2
1
1
1
-
Drill Bits
11
Part
Number
Halco 1
650017
650032
mm
Inch
Face
Design
Type
Buttons
Qty/Dia
Weight
(kg)
55
64
2 1/6
2 1/2
Flat
Flat
Domed
Domed
6 x 11 mm / 2 x 9 mm
6 x 11 mm / 3 x 9 mm
1.16
1.37
Additional drill bit configurations are available upon request
12
13
14
15
16
11
03/06/2014 12:59
2
DOMINATOR 20
AT A GLANCE
SIZE
70 - 76mm
(2 3/4 - 3“)
SHANK
Halco 2
AIR PRESSURE
100 - 250 psi
(7 - 17 bar)
DOMINATOR 20
maintenance.
The Dominator 20 is designed for small
diameter drilling operations. Its superior drilling
performance makes it one of the fastest small
hammers on the market. The valveless design of
the Dominator 20 provides high performance at
both low and high pressures. The Dominator 20‘s
robust design allows it to withstand heavy duty
applications. A non-return-valve (N.R.V) is fitted
into the Dominator 20 to prevent flooding where
ground water is present. The unique drill bit design
for the Dominator 20 does not use foot valves
which reduces the possibility of hammer failure.
100 - 250 psi ( 7- 17 bar).
(2 3/4 - 3”).
Available Shanks
Halco 2
hammer life.
Air Consumption
900
800
700
CFM
600
500
400
300
200
100
0
100
150
200
250
300
350
400
450
500
PSI
12
03/06/2014 12:59
1
2
3
4
5
6
7
8
9
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Dominator 20
600423
Halco 2
50mm DIN 405 6 TPI Box
48mm (1.890”)
12.4 Kg
62 mm (2.44”)
817 mm (32.16”)
150 Kg (330lbs)
Description
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Dominator 20
Halco 2
600423
Description
Top Adaptor
O’ Ring
Spacer Ring
Make-Up Ring
N.R.V
Spring
Air Distributor
O’ Ring
Liner
Piston
Cylinder
Snap Ring
Bit Guide Bush
Snap Ring
Bit Retaining Ring
O’ Ring
Chuck
Maintenance Kits
Service Kit
SK86
1
1
1
1
2
1
1
Repair Kit
RK142
1
1
1
1
1
1
2
1
1
1
1
Drill Bits
10
11
Part
Number
Halco 2
650952
650953
Diameter
mm
Inch
70
76
2 3/4
3
Face
Design
Type
Buttons
Qty/Dia
Weight
(kg)
Flat
Flat
Domed
Domed
4 x 9 mm / 6 x 11 mm
5 x 9 mm / 6 x 11 mm
2.4
2.5
12
13
14
15
16
17
13
03/06/2014 12:59
3
DOMINATOR 375
AT A GLANCE
SIZE
90 - 100mm
(3 3/4 - 3 15/16“)
SHANK
MD 3.5
AIR PRESSURE
100 - 350 psi
(7 - 24 bar)
DOMINATOR 375
Internal N.R.V. (Non-Return-Valve)
to prevent flooding when drilling
in water.
Dominator 375 hammer gives up to 25% increase
in performance compared to Dominator 350 and
Dart 350. This exceptional hammer is simple,
robust and has a high penetration rate. The
Dominator 375 has an integral N.R.V. (NonReturn-Valve) with an adjustable air bleed system
to adjust air volume, this hammer has a liner and
solid piston design.
This hammer has few internal parts which makes
on site servicing easy with minimum tools needed.
The MD 3.5 shank drill bit can be fitted for
improved service life and heavy duty applications.
Solid piston with liner support.
100 - 350 psi (7 - 24 bar).
Drilling diameters of 95mm - 115mm
(3 1/2 - 4 1/8”).
Available Shanks
MD 3.5
IR DHD 3.5 shank reduces contact
stresses and wear rates.
Air Consumption
700
600
CFM
500
400
300
200
100
0
100
150
200
250
300
350
400
450
500
PSI
14
03/06/2014 12:59
1
2
Hammer Overview
3
4
5
Dominator 375
600393
MD 3.5
2 3/8 API Reg Pin
64 mm (2.520”)
24 kg
85 mm (3.35”)
885 mm (34.84”)
150 kg (330 lbs)
300 kg (660 lbs)
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Recommended Minimum Thrust
Parts List
6
7
8
9
10
11
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Top-Adaptor
3
N.R.V. Plug - Solid
N.R.V. Plug 1/8”
N.R.V. Plug 3/16”
4
N.R.V.
5
N.R.V. Spring
6
Shim- 4.9 mm
Shim - 5.3 mm
Shim - 5.7 mm
7
Compression Spring
8
Air Distributor
9
O’Ring
10
Liner
11
Cylinder
12
Piston
13
Snap Ring
14
Bit Retaining Band
15
Bit Retaining Rings
16
Chuck
17
End Cap
Dominator 375
MD 3.5
600393
200111
604371
604480
604481
604482
604378
760154
602634
602635
602636
760107
604461
768099
604459
604458
604460
783051
792040
604457
604456
741045
Maintenance Kits
Service Kit
SK64
2
2
2
2
2
2
2
-
Repair Kit
RK101
Life Kit
LK04
1
2
2
2
1
2
1
1
1
1
2
1
2
2
1
1
1
Drill Bits
12
Part
Number
MD 3.5 Shank
653354
653349
mm
Diameter
Inch
95
100
3 3/4
3 15/16
Face
Design
Type
Buttons
QTY/DIA
Weight
(kg)
Convex
Flat Faced
Parabolic
Domed
11 x 14 mm
16 x 11 mm
5.0
5.2
13
14
15
16
17
15
03/06/2014 12:59
4
SUPER DOMINATOR 400
AT A GLANCE
SIZE
108 - 150mm
(4 1/4 - 5 7/8“)
SHANK
Halco 4
DHD 340A
AIR PRESSURE
100 - 350 psi
(7 - 24 bar)
SUPER DOMINATOR
400
Top-adaptor with internal N.R.V.
(Non-Return-Valve) replaceable
air distributor.
The Super Dominator 400 is a heavy duty
hammer with thicker 98mm (3.8”) diameter outer
components to provide an extended service life
in abrasive conditions and is also suitable for
waterwell drilling.
The Super Dominator 400 is designed for
maximum performance at higher pressures.
100 - 350 psi (7 - 24 bar).
(4 1/4 - 5 7/8”).
Available Shanks
Halco 4
DHD 340A
Air Consumption (CFM)
900
800
700
CFM
600
500
400
300
200
100
Halco Shank, A34-15/SD4 and
IR DHD340A reduces contact
0
100
150
200
250
300
350
400
450
500
PSI
16
03/06/2014 13:00
Hammer Overview
1
2
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Super Dominator 400
600224
600258
Halco
Ingersoll Rand
Halco 4
DHD 340A
2 3/8 API REG PIN
23/8 API REG PIN
65 mm (2.560")
65 mm (2.560")
38 kg
38 kg
98 mm (3 7/8")
98 mm (3 7/8")
1042 mm (41")
1042 mm (41")
250 kg (550 lbs)
250 kg (550 lbs)
500 kg (1100 lbs)
500 kg (1100 lbs)
Parts List
3
4
5
6
7
8
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Super Dominator 400
Halco 4 / DHD 340A
600224 / 600258
Description
Thread Protector
Top-Adaptor
O Ring
N.R.V.
N.R.V. Spring
Shim - 4.9mm
Shim - 5.3mm
Shim - 5.7mm
Compression Spring
Air Distributor
O Ring
Cylinder
Piston
Snap Ring
Containment Band
Bit Retaining Ring
Chuck Lock Ring
Chuck
End Cap
Maintenance Kits
Service Kit
SK30
2
2
2
1
2
2
-
Repair Kit
RK52
2
1
2
1
1
1
1
2
1
1
2
1
-
Service Kit
SK45
2
2
2
1
2
-
Repair Kit
RK83
2
1
2
1
1
1
1
2
1
1
2
1
-
Drill Bits
9
10
11
12
13
14
15
16
17
Part
Diameter
Face
mm
Inch
Design
Number
Super Dominator 400 Halco Shank
650580
108
Concave
4 1/4
Convex
650788
108
4 1/4
Convex
650987
108
4 1/4
Concave
653248
108
4 1/4
Convex
650931
110
4 5/16
Convex
653106
110
4 5/16
1
Convex
650932
115
4 /2
1
Convex
650936
115
4 /2
Convex
650969
115
4 1/2
Convex
653136
115
4 1/2
Concave
653249
115
4 1/2
Convex
650933
120
4 3/4
650466
127
5
Convex
650925
127
5
Convex
1
Convex
650073
130
5 /8
1
Convex
650444
140
5 /2
Convex
650445
150
5 7/8
Ir DHD 340A Shank/Atlas Copco Cop 44
Convex
650950
108
4 1/4
Convex
650968
108
4 1/4
Convex
650949
110
4 5/16
Convex
650961
110
4 5/16
5
Convex
653091
110
4 /16
1
Convex
650526
115
4 /2
Concave
650625
115
4 1/2
Flat
650955
115
4 1/2
Convex
650967
115
4 1/2
650680
120
Concave
4 3/4
650612
121
Convex
4 3/4
650611
127
5
Concave
650966
127
5
Concave
650013
127
5
Convex
1
Concave
650614
130
5 /8
Convex
650675
130
5 1/8
Concave
653094
140
5 1/2
Buttons
Type
Qty/dia
Ballistic
Domed
Semi-Ballistic
Domed / Ballistic
Domed
Semi-Ballistic
Domed
Ballistic
Semi-Ballistic
Parabolic
Domed/Ballistic
Domed
Domed
Semi-Ballistic
Ballistic
Domed
Domed
14 x 13 mm
13 x 13 mm
15 x 13 mm
8 x 11 mm D/8 x 11 mm
15 x 13 mm
18 x 11 mm
8 x 14 mm / 8 x 13 mm
16 x 13 mm
16 x 13 mm
17 x 14 mm
8 x 13 mm D/8 x 13 mm
8 x 14 mm / 8 x 13 mm
16 x 13 mm
16 x 13 mm
16 x 13 mm
17 x 13 mm
17 x 13 mm
Domed
15 x 13 mm
Semi-Ballistic
15 x 13 mm
Domed
15 x 13 mm
Semi-Ballistic
15 x 13 mm
Parabolic
14 x 14 mm
Domed
16 x 13 mm
Domed/Semi-Ballistic 8 x 14 mm D/6 x 13 mm S/B
Domed
8 x 14 mm/10 x 13 mm
Semi-Ballistic
16 x 13 mm
Domed/Semi-Ballistic
8 x 13 mm/8 x 13 mm
Semi-Ballistic
14 x 13 mm
Domed
16 x 13 mm
Semi-Ballistic
16 x 13 mm
Domed
16 x 13 mm
Domed/Semi-Ballistic 8 x 14 mm D/8 x 13 mm S/B
Semi-Ballistic
16 x 13 mm
Domed
9 x 16 mm/9 x 14 mm
Over Weight
(kg)
Size
Y
Y
Y
Y
Y
9.5
9.5
9.1
9.1
9.6
9
9.7
9.7
9.6
9.5
9.6
10
11
10.7
10.9
12.5
13.5
Y
Y
Y
Y
Y
Y
8
10
8.1
8.1
8.5
8.2
8.2
8.3
8.5
10
9.5
9.5
9.6
10.6
10.1
9.2
11.8
17
03/06/2014 13:00
4
SUPER DOMINATOR 450
AT A GLANCE
SIZE
110 - 127mm
(4 5/16 - 5“)
SHANK
Halco 4
AIR PRESSURE
100 - 350 psi
(7 - 24 bar)
SUPER DOMINATOR
450
required. External N.R.V. for
easy maintenance.
The Super Dominator 450 has been specifically
designed for high production drilling in blast-hole
applications.
Revised chamber volumes
and cycle timing to optimize
performance.
The Super Dominator 450 utilizes Halco’s all
new 12 spline shank which has simplistic robust
geometry combined with increased drive contact
area. The Super Dominator 450 can be also used
with the IR340A/Atlas Copco Cop 44.
improved balance and location within
the cylinder.
Suitable for operation at air pressures
of 100 - 350 psi (7 - 24 bar).
The hammer is robust and has few parts, making
it user friendly and reliable. The Super Dominator
450 is fitted with a non-return-valve in top-adaptor
for quick and easy inspection and maintenance
operations. A fixed air distributor in the topadaptor body means the Super Dominator 450
requires no shimming which simplifies servicing.
The Super Dominator 450 has no liner which
increases the piston power output.
(4 5/16 - 5”).
Available Shanks
Halco 4
Revised cylinder porting to
maximise air flow efficiency.
900
800
700
CFM
600
500
400
300
200
Halco Super Dominator 450 shank
reduces contact stresses and
wear rates.
100
0
100
150
200
250
300
350
400
450
500
PSI
18
03/06/2014 13:00
1
2
3
4
5
6
7
8
9
10
11
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Super Dominator 450
600382
Halco 4
2 3/8" API REG PIN
65 mm (2.560")
38.5 kg
100.5 mm (3.956")
914 mm (35.984")
250 kg (550 lbs)
500 kg (1100 lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Super Dominator 450
Halco 4
Maintenance Kits
Service Kits
SK59
Description
Thread Protector
Snap Ring
N.R.V. Seat
O’Ring
Non Return Valve
N.R.V. Spring
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Bit Guide Bush
O’Ring
Bit Retaining Ring
Chuck Lock Ring
Chuck
End Cap
2
2
2
2
2
2
2
Repair Kits
RK93
2
1
2
1
2
2
2
1
1
2
1
-
Drill Bits
12
13
Part
Diameter
Face
Number
mm
Inch
Design
Halco Super Dominator 450
653217
110
4 5/16
Convex
653223
110
4 5/16
Convex
653209
115
4 1/2
Convex
653197
127
5
Convex
653268
127
5
Concave
Type
Ballistic
Domed
Ballistic
Ballistic
Domed
Buttons
Qty/Dia
14 x 14 mm
14 x 14 mm
15 x 14 mm
18 x 14 mm
8 x 13 mm + 8 x 14 mm
Over
Size
Weight
(kg)
Y
Y
7.96
7.96
8.13
9.05
8.75
14
15
16
17
19
03/06/2014 13:00
5
SUPER DOMINATOR 500
AT A GLANCE
SIZE
127 - 165mm
(5 - 6 1/2“)
SHANK
DHD 350R
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
SUPER DOMINATOR
500
maintenance.
Super Dominator 500 is a class leader in
performance and is suitable for drilling at a wide
range of air pressures, excelling at high working
pressures. The Super Dominator 500 has a one
piece top-adaptor with N.R.V. (Non-Return-Valve)
fitted for easy inspection and service, with integral
finger to reduce maintenance and eliminate
shimming. The Super Dominator 500 has no
liner which increases the piston blow energy and
reduces part required.
Super Dominator 500 is ideal for blast hole drilling
applications.
Super Dominator 500 is simple to maintain and to
service with only few simple tools required.
of 100 - 435 psi (7 - 30 bar).
(5 - 6 1/2”).
Available Shanks
DHD 350R
Air Consumption
1400
1200
CFM
1000
800
600
400
200
0
100
IR DHD 350 shank reduces
contact stresses and wear rates.
150
200
250
300
350
400
450
500
PSI
20
03/06/2014 13:00
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Super Dominator 500
600267
Ingersoll Rand
Dhd 350R
3 1/2" Api Reg Pin
90 mm (3.544")
58 kg
118 mm (4.65")
975 mm (38.40")
400 kg (900 lbs)
900 kg (1980 lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Super Dominator 500
Dhd 350R
600267
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
N.r.v.
N.r.v. Spring
N.r.v. Shield
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
Bit Retaining Ring
Chuck Lock Ring
Chuck Spacer
Chuck
End Cap
Maintenance Kits
Service Kits
SK48
2
2
2
2
2
2
1
1
-
Repair Kits
RK72
2
1
2
1
2
1
2
2
2
1
1
1
1
-
Drill Bits
Part
Diameter
Face
Button
Over Weight
Number mm
Inch
Design
Type
Qty / Dia
Size
(kg)
Ingersoll Rand Shank - Dhd350R / Atlas Copco Cop 54
653061
127
5
Concave
Domed
8 x 13 mm / 8 x 16mm
650677
140
5 1/2 Concave Domed/Semi-Ballistic 8 x 16 mm D / 7 x 16 mm SB
16.4
653205
140
5 1/2
Flat
Domed
7 x 16mm D / 8 x 16 mm Long
16.2
653070
140
5 1/2
Convex
Semi-Ballistic
8 x 16 mm SB / 8 x16 mm Long SB
15.9
653257
146
5 3/4 Concave
Domed
15 x 16 mm
16.3
650676
150
5 7/8 Concave Domed/Semi-Ballistic 9 x 16 mm D /10 x16 mm SB
Y
17.8
650711
152
6
Convex
Domed
20 x 16 mm
Y
17.8
653092
165
6 1/2 Concave
Domed
10 x 16 mm / 8 x 20 mm
Y
21.4
17
18
21
03/06/2014 13:00
5
SUPER DOMINATOR 550 HD
AT A GLANCE
SIZE
140 - 165mm
(5 1/2 - 6 1/2“)
SHANK
DHD 350R
QL50
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
SUPER DOMINATOR
550 HD
maintenance.
Super Dominator 550 HD is a class leader in
performance and is suitable for drilling at a
wide range of air pressures, excelling at high
working pressures. The Super Dominator 550 HD
combines the raw power of the Super Dominator
500 with extended hammer life in abrasive
conditions due to its larger outside diameter.
Super Dominator 550 HD has a one piece topadaptor with N.R.V. (Non-Return-Valve) fitted for
easy inspection and service, with integral finger
to reduce maintenance and eliminate shimming.
Super Dominator 550 HD has no liner which
increases the piston blow energy and reduces part
required.
Super Dominator 550 HD is ideal for blast hole
drilling applications.
Super Dominator 550 HD is simple to maintain and
to service with only few simple tools required.
100 - 435 psi (7 - 30 bar).
Drilling diameters of 135mm - 165mm (5 - 6 1/2”).
Available Shanks
hammer life.
DHD 350R
QL50
Air Consumption
1400
1200
CFM
1000
DHD 350R and AC Cop 54 shank
wear rates.
800
600
400
200
0
100
150
200
250
300
350
400
450
500
PSI
22
03/06/2014 13:00
D
1
2
3
4
Hammer Overview
5
Hammer Type
6
7
Super Dominator 550 HD
Super Dominator 550
Hd QL 50
600293
Ingersoll Rand
Dhd 350R
3 1/2" Api Reg Pin
90 mm (3.544")
67 kg
124.5 mm (4.85")
975 mm (38.40")
400 kg (900 lbs)
900 kg (1980 lbs)
600294
Ingersoll Rand
QL50
3 1/2" Api Reg Pin
90 mm (3.544")
67 kg
124.5 mm (4.85")
955 mm (37.60")
400 kg (900 lbs)
900 kg (1980 lbs)
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
8
Model Number
Item
Dhd 350R
Maintenance Kits
600293
Service Kits Repair Kits Service Kits Repair Kits
Description
SK49
RK73
SK40
1
Thread Protector
-
-
-
RK77
-
2
Snap Ring
2
2
2
2
1
3
N.r.v. Seat
-
1
-
4
O’Ring
2
2
2
2
5
N.r.v.
-
1
-
1
6
N.r.v. Spring
2
2
2
2
7
N.r.v. Shield
1
1
1
1
8
Top-Adaptor
-
-
-
-
9
9
O’Ring
2
2
2
2
10
10
O’Ring
2
2
2
2
11
Cylinder
-
-
-
-
12
Piston
-
-
-
-
13
Snap Ring
2
2
2
2
14
Bit Retaining Ring
-
1
-
1
15
Chuck Lock Ring
1
1
1
1
16
Chuck Spacer
1
1
-
-
17
Chuck
-
1
-
1
18
End Cap
-
-
-
-
11
12
Drill Bits
13
14
15
16
Part
Diameter
Face
Button
Over Weight
Number mm
Inch
Design
Type
Qty / Dia
Size
(kg)
Ingersoll Rand Shank - Dhd350R / Atlas Copco Cop 54
140
5 1/2
653205
Flat
Domed
7 x 16 mm D / 8 x 16 mm Long
16.2
653070
140
5 1/2
Convex
Semi-Ballistic
8 x 16 mm SB / 8 x 16 mm Long SB
15.9
653257
146
5 3/4 Concave
Domed
15 x 16 mm
16.3
650676
150
5 7/8 Concave Domed/Semi-Ballistic 9x16 mm D / 10 x 16 mm SB
Y
17.8
650711
152
6
Convex
Domed
20 x 16 mm
Y
17.8
653092
165
6 1/2 Concave
Domed
10 x 16 mm / 8 x 20 mm
Y
21.4
17
18
23
03/06/2014 13:00
6
DOMINATOR 600
AT A GLANCE
SIZE
152 - 245mm
(6 - 9 5/8“)
SHANK
Halco 6
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
DOMINATOR 600
Top-adaptor with internal N.R.V.
(Non-Return-Valve) replaceable
air distributor.
The Dominator 600 is a class leader in
performance and is suitable for drilling at a wide
range of air pressures, excelling at higher working
pressures. Dominator 600 has a unique extended
top-adaptor with retract carbides on IngersollRand and Mission versions for digging out of
drilled bores.
100 - 435 psi (7 - 30 bar).
(6 - 9 5/8”).
Available Shanks
Halco 6
Air Consumption
1800
1600
1400
Halco Mach 60 shank reduces
contact stresses and wear rates.
CFM
1200
1000
800
600
400
200
0
100
150
200
250
300
350
400
450
500
PSI
24
03/06/2014 13:00
1
2
Hammer Overview
Hammer Type
Part Number
Shank
3
4
5
Dominator 600
600151
Halco
Halco 6
3 1/2" Api Reg Pin
90 mm (3.544")
89 kg
139 mm (5.472")
1208 mm (47.559")
500 kg (1100 lbs)
1500 kg (3300 lbs)
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
6
7
8
9
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
18
19
20
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Dominator 600
Halco 6
600151
Description
Thread Protector
Top-Adaptor
O’Ring
Non Return Valve
N.r.v. Spring
N.r.v. Housing
Shim - 4mm
Shim - 5mm
Shim - 6mm
Shim - 7mm
Compression Spring
Air Distributor
O’Ring
Snap Ring
Cylinder
Piston
Snap Ring
Bottom Spacer
Bit Guide Bush
Bit Retaining Ring
O’Ring
Chuck Spacer
Chuck
Cap
Maintenance Kits
Service Kits
SK05
2
2
2
4
2
1
-
Repair Kits
RK07
2
1
2
1
1
1
1
1
2
4
1
1
2
1
1
-
Drill Bits
Part
Diameter
Number
mm
Inch
Halco 6 Shank
650585
152
6
650939
165
6 1/2
650927
170
6 3/4
650474
178
7
650354
191
7 1/2
650440
200
7 7/8
650681
203
8
650441
225
8 7/8
650457
245
9 5/8
Face
Design
Button
Type
Qty
Convex
Convex
Flat
Convex
Convex
Convex
Concave
Convex
Convex
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
16 x 16 mm
19 x 16 mm
19 x 16 mm
18 x 16 mm
21 x 16 mm
20 x 16 mm
31 x 16 mm
26 x 16 mm
27 x 16 mm
Over
Size
Weight
(kg)
Y
Y
Y
Y
Y
Y
23.5
26
26
30
32.5
34
35
42
49
21
25
03/06/2014 13:00
6
SUPER DOMINATOR 600
AT A GLANCE
SIZE
152 - 241mm
(6 - 9 1/2“)
SHANK
DHD 360
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
SUPER
DOMINATOR 600
internal parts. No make up required.
External N.R.V. for easy maintenance.
Revised chamber volumes
and cycle timing to
optimize performance.
The Super Dominator 600 is one of the fastest 6”
hammers specifically designed for high production
drilling in blast-hole applications. The Super
Dominator 600 is a reduced weight hammer with
waterwell drilling capabilities. The unique one
piece top-adaptor with N.R.V. (Non-Return-Valve)
makes it easy to maintain and service the hammer.
Super Dominator 600 requires only few tools to
service and maintain the hammer.
of 100 - 435 psi (7 - 30 bar).
(6 1/8 - 9 1/2”).
Available Shanks
DHD 360
Air Consumption
1800
1600
1400
1200
1000
CFM
DHD 360 and Cop 64 shank
wear rates.
800
600
400
200
0
100
150
200
250
300
350
400
450
500
PSI
26
03/06/2014 13:00
1
2
3
4
5
6
Hammer Overview
Hammer Type
Part Number
Shank
7
8
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Super Dominator 600
600272
Ingersoll Rand
Dhd 360
3 1/2" Api Reg Pin
101 mm (3.977")
100 kg
140 mm (5.511")
1139 mm (44.842")
500 kg (1100 lbs)
1500 kg (3300 lbs)
Parts List
9
10
11
12
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Super Dominator 600
DHD 360
600272
Description
Thread Protector
Snap Ring
N.R.V. Seat
O’Ring
Non Return Valve
N.R.V. Spring
N.R.V. Spring Shield
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
O’Ring
Bit Guide Bush
Bit Retaining Ring
O’Ring
Chuck Spacer
Chuck
End Cap
Maintenance Kits
Service Kits
SK 37
2
2
2
2
2
2
2
1
-
Repair Kits
RK 65
2
1
2
1
2
1
2
2
2
2
1
1
1
1
-
Drill Bits
13
14
15
16
17
18
19
Part
Diameter
Face
Number
mm
Inch
Design
Type
Ingersoll Rand (Dhd360) / Atlas Copco Cop64
650783
152
6
Convex
Domed
650789
165
6 1/2
Concave
Domed
650795
165
6 1/2
Convex
Domed
653134
165
6 1/2
Convex
Domed
653038
170
6 3/4
Concave
Domed
653097
180
7
Concave
Domed
653098
190
7 1/2
Concave
Domed
653023
200
7 5/8
Convex
Domed
650673
203
8
Concave
Domed
650335
203
8
Convex
Domed
650684
220
8 5/8
Concave
Domed
650696
241
9 1/2
Flat
Domed
Button
Qty
20 x 16 mm
18 x 16 mm
20 x 16 mm
16 x 16 mm / 12 x 16 mm Long
18 x 16 mm
18 x 16 mm
24 x 16 mm
21 x 16 mm
31 x 16 mm
21 x 16 mm
22 x 20 mm
18 x 16 mm / 10 x 20 mm
Over Weight
Size
(kg)
Y
Y
Y
Y
Y
Y
Y
25
25.5
26
25
26.5
27.3
30
34.5
35.2
35
40
50
20
27
03/06/2014 13:00
6
SUPER DOM 650 HD QL 60
AT A GLANCE
SIZE
156 - 241mm
(6 1/8 - 9 1/2“))
SHANK
QL 60
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
SUPER DOM 650
HD QL 60
required.
The Super Dominator 650 HD QL 60 has been
designed to give maximum performance in blasthole applications. This hammer has been tuned
to efficiently utilize the air supply to give optimum
penetration rates. The Super Dominator 650 HD
QL 60 is suitable for drilling over a wide range of
air pressures, excelling at higher pressures.
The unique top-adaptor with N.R.V. (Non-ReturnValve) makes this hammer easy to maintain and
service.
Revised reversible chamber
volumes and cycle timing to
optimize performance.
of 100 - 435 psi (7 - 30 bar).
within the cylinder..
Available Shanks
(6 1/2 - 9 1/2”).
QL 60
Reversible cylinder.
Air Consumption
1800
1600
1400
CFM
1200
1000
800
600
IR QL 60 shank reduces contact
400
200
0
100
150
200
250
300
350
400
450
500
PSI
28
03/06/2014 13:01
1
2
3
4
5
Hammer Overview
6
7
8
9
10
11
12
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
QL 60
600316
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
Non Return Shuttle Valve
N.r.v. Spring
N.r.v. Spring Shield
Integral Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
O’Ring
Bit Guide Bush
Bit Retaining Ring
Chuck
End Cap
Sk
rk
13
14
15
16
17
Super Dominator 650 HD QL 60
600316
Ingersoll Rand
QL 60
3 1/2" Api Reg Pin
101 mm (3.977")
100 kg
146 mm (5.748")
1043 mm (41.07")
500 kg (1100 lbs)
1500 kg (3300 lbs)
Maintenance Kits
Service Kit
SK43
2
2
2
2
2
2
2
-
Service Kit
Repair Kit
SK43
RK81
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
602852
603547
601564
Repair Kit
RK81
2
1
2
1
1
2
2
2
1
1
1
-
Drill Bits
Part
Diameter
Face
Number
mm
Inch
Design
Ingersoll Rand QL 60 Shank
650094
156
6 1/8
Concave
653139
165
6 1/2
Concave
653160
171
6 3/4
Convex
653128
178
7
Concave
653227
190
7 1/2
Concave
653142
203
8
Concave
653211
241
9 1/2
Concave
Type
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Buttons
Qty / Dia
16 x 16 mm
18 x 18 mm
19 x 18 mm
8 x 20 mm + 11 x 16 mm
24 x 16 mm
31 x 16 mm
18 x 20 mm / 10 x 16 mm
Over Weight
Size
(kg)
Y
Y
Y
Y
23.2
24.4
25.3
26.2
31.7
34.1
39.5
18
29
03/06/2014 13:01
7
DOMINATOR 750
AT A GLANCE
SIZE
200 - 300mm
(7 7/8 - 12”)
SHANK
SD 8
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
DOMINATOR 750
maintenance.
The Dominator 750 offers class leading performance.
The Mining, Quarrying and Waterwell industries
all benefit from the reliable design offered by a
one piece top-adaptor/air distributor. A reversible
cylinder is also fitted to the Dominator 750 to
prolong hammer life and reduce costs. A few simple
tools are required to maintain and service.
100 - 435 psi (7 - 30 bar).
(7 7/8 - 12”).
Available Shanks
SD 8
hammer life.
Air Consumption
2500
CFM
2000
1500
1000
500
0
100
150
200
250
300
350
400
450
500
PSI
30
03/06/2014 13:01
1
2
3
4
5
6
7
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Dominator 750
600243
SD 8
4 1/2" Api Reg Pin
115 mm (4.528")
165 kg
172 mm (6.772")
1232 mm (48.504")
800 kg (1760 lbs)
2000 kg (4400 lbs)
Parts List
8
9
10
11
12
Model
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Dominator 750
SD 8
600243
Description
Thread Protector
Snap Ring
O’Ring
N.r.v. Seat
Non Return Valve
N.r.v. Spring
Top-Adaptor
O’Ring
O’Ring
Spacer
Cylinder
Piston
Snap Ring
O’Ring
Bit Retaining Ring
Chuck Spacer
Chuck
Cap
Maintenance Kits
Service Kit
SK23
2
2
2
2
2
2
2
2
-
Repair Kit
RK37
2
2
1
1
2
2
2
2
2
1
2
1
-
Drill Bits
13
14
15
16
Part
Number
sd 8
650959
650375
650705
650606
653105
650039
Diameter
mm
Inch
200
203
222
254
270
300
7 7/8
8
8 3/4
10
10 5/8
12
Face
Design
Type
Buttons
Qty
Concave
Concave
Concave
Concave
Concave
Flat
Domed
Domed
Domed
Domed
Domed
Domed
12x16 mm/9x20 mm/6x13 mm
10x20 mm / 14x16 mm
24 x 20 mm
11x16 mm / 18 x 20 mm
34 x 18 mm
29 x 20 mm
Over Weight
Size
(kg)
Y
43.0
43.5
46.5
56.5
57.0
84.5
17
18
31
03/06/2014 13:01
8
DOMINATOR 850
AT A GLANCE
SIZE
222 - 270mm
(8 3/4 - 10 5/8”
SHANK
QL 80
AIR PRESSURE
100 - 435 psi
(7 - 30 bar)
DOMINATOR 850
maintenance.
The Dominator 850 has been designed for high
performance drilling in hard to medium rock
formations, particularly mining applications. Its
class leading performance has been achieved with
a larger/heavier piston and a valveless air cycle
providing a 50% increase in stroke. As well as
a reversible cylinder for prolonged hammer life,
the Dominator 850 benefits from a QL80 shank
design. The one piece top-adaptor with N.R.V.
(Non-Return-Valve) makes it easy to maintain and
service the hammer. This hammer has few internal
parts which makes on site servicing easy with
minimum tools needed.
100 - 435 psi (7 - 30 bar).
(8 3/4 - 10 5/8”).
Available Shanks
QL 80
hammer life.
Air Consumption
2500
CFM
2000
1500
1000
500
0
100
150
200
250
300
350
400
450
500
PSI
32
03/06/2014 13:01
1
2
3
4
5
6
7
8
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Dominator 850
600245
QL 80
4 1/2" Api Reg Pin
125 mm (4.921")
210 kg
192 mm (7.559")
1281 mm (50.433")
800 kg (1760 lbs)
2000 kg (4400 lbs)
Parts List
9
10
11
12
13
14
15
16
Model
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Dominator 850
QL 80
600245
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
N.r.v.
N.r.v. Cover
N.r.v. Spring
Top-Adaptor
Spacer
O’Ring
Piston
Cylinder
Snap Ring
O’Ring
Bit Guide Bush
Bit Ring
Chuck Spacer
Chuck
End Cap
Maintenance Kits
Service Kit
SK78
2
2
1
2
2
2
2
-
Repair Kit
RK131
2
1
2
1
1
2
2
2
2
1
1
2
1
-
Drill Bits
Part
Number
QL 80
653062
653239
653254
653263
Diameter
mm
Inch
222
254
270
270
8 3/4
10
10 5/8
10 5/8
Face
Design
Type
Concave
Concave
Concave
Concave
Domed
Domed
Domed
Parabolic
Buttons
Qty
14 x 18 mm / 10 x 18 mm Long
34x18 mm / 12x13 mm Retracks
Over Weight
Size
(kg)
56.8
64
69.5
69.5
17
18
19
33
03/06/2014 13:01
AIR CONSUMPTION
2200
2000
1800
1600
1400
1200
1000
800
600
800
400
200
0
100
150
200
250
300
350
400
450
500
Air Pressure (PSI)
DOM 10
SDOM 600
DOM 20
SDOM 650
DOM 375
DOM 750
SDOM 400
DOM 850
SDOM 450
SDOM 500
SDOM 550 HD
DOM 600
34
03/06/2014 13:01
OUR COMMITMENT TO YOU
CONVERSION TABLE
Air Volume
At Halco Rock Tools we pride
ourselves on providing exemplary
levels of customer service, support
and training no matter what your
drilling requirements are.
Having manufactured drilling
consumables for over sixty five years
our support team are well placed to
provide accurate and timely solutions
to optimise your drilling performance.
Halco Rock Tools is a world class manufacturer
of Down-The-Hole (DTH) drilling equipment with
locations around the globe, and headquartered
in the UK. Halco pioneered the development and
distribution of DTH hammers in the 1950s.
Produced for more than 65 years, our products
continue to be regarded as some of the most
reliable and durable available today. This is due to
our commitment to exceeding customer needs,
design expertise and rigorous product testing in
extreme drilling conditions.
The hammers and drill bits in this catalogue are
designed to offer optimum drilling performance
in Drill and Blast mining and quarry applications.
Additional hammers and bits are available for the
following applications:
Example
1 cc = .001 litre
1000 cc = 1 litre
1 litre = .001 m3
1000 litres = 1 m3
Air Flow
Example
1 cfm = 0.0283 m3/min
100 cfm = 2.83 m3/min
1 cfm = 0.4719 litre/sec
100 cfm = 47.19 litre/sec
1 m3/min = 35.315 cfm
10 m3/min = 353.15 cfm
1 m3/min = 16.667 litre/sec
10 m3/min = 166.67 litre/sec
1 litre/sec = 2.1189 cfm
100 litre/sec = 211.89 cfm
1 litre/sec = 0.0600 m3/min
100 litre/sec = 6.00 m3/min
Air Pressure
Example
1 psi = 0.0689 bar
100 psi = 6.89 bar
1 psi = 0.0703 kg/cm2
100 psi = 7.03 kg/cm2
1 psi = 0.0680 atm (Atmosphere)
100 psi = 6.80 atm
1 bar = 14.504 psi
10 bar = 145.04 psi
1 bar = 1.0197 kg/cm2
10 bar = 10.197 kg/cm2
1 bar = 0.9869 atm
10 bar = 9.869 atm
1 atm = 14.696 psi
10 atm = 146.96 psi
1 atm = 1.0132 bar
10 atm = 10.132 bar
1 atm = 1.0332 kg/cm2
10 atm = 10.332 kg/cm2
Velocity
Example
• Construction
1 m/min = 3.2808 ft/min
1000 m/min = 3280.80 ft/min
1 m/min = 0.0167 m/sec
1000 m/min = 16.70 m/sec
• Oil and Gas
1 ft/min= 0.3048 m/min
1000 ft/min = 304.80 m/min
1 ft/min = 0.0051 m/sec
1000 ft/min = 5.10 m/sec
1 m/sec = 60.00 m/min
10 m/sec = 600 m/min
1 m/sec = 196.85 ft/min
10 m/sec = 1968.50 ft/min
• Exploration
We can offer training in hammer and bit selection,
service, maintenance and repair. With specialists
available at all of our locations, you‘re never
far away from the support you require. Halco‘s
superb team of engineers are only a phone
call away.
Further Learning Aids:
• A-Z of DTH Drilling
Torque
Example
1 lbft = 0.1383 kgm
1000 lbft = 138.30 kgm
1 lbft = 1.3558 Nm
1000 lbft = 1355.80 Nm
1 lbft = 12.00 lbin
1000 lbft = 12000 lbin
1 kgm = 7.233 lbft
100 kgm = 723.30 lbft
1 kgm = 9.8067 Nm
100 kgm = 980.67 Nm
• Civil Engineering
1 kgm = 86.796 lbin
100 kgm = 8679.60 lbin
• DTH Maintenance Manual
1 lbin = 0.0833 lbft
1000 lbin = 83.30 lbft
• Geothermal/Waterwell
• User Guide
1 lbin = 0.0115 kgm
1000 lbin = 11.50 kgm
1 lbin = 0.1130 Nm
1000 lbin = 113 Nm
• www.halcorocktools.com
2
35
03/06/2014 12:37
United Kingdom
Halco Rock Tools Ltd
Armytage Road
Brighouse
West Yorkshire
HD6 1QF
Tel: +44 (0)1422 399900
Email: salesuk@halcorocktools.com
USA
Halco America LLC
2720 Fallon Drive
Sherman
TX 75090
Tel: +1 903-893-2300
Email: salesusa@halcorocktools.com
Halco Rock Tools
Quality Management System
is Certified to ISO9001: 2008
Certificate No: LRQ 0850659
Australia
Halco Australia
Dillington Pass
Landsdale WA 6065
Tel: +61 8 9303 9506
Email: salesaus@halcorocktools.com
South Africa
Halco South Africa
21 Harriet Ave
Driehoek
Germiston 1459
Shop No4
Johannesburg
Email: salesafrica@halcorocktools.com
V2. 2014

your drilling expert

Transcription

Similar documents

Available Shanks

Product catalogue

your global drilling partner

Graders - DGI Trading

1973 BSA B50 MX - Supreme Motorcycles

Einbauanleitung