International
Transcription
International
REPLACEMENT PARTS FOR: CHEVROLET/GMC FORD/STERLING FREIGHTLINER HINO INTERNATIONAL ISUZU MITSUBISHI SPRINTER UD New Products!!! Charge Air Coolers for International pg 46 Complete Replacement Doors pgs 4-5 ROLLARAMP ® pg Replacement Slats for Hackney & Mickey pg 61 Rear Door Hinges pgs 70-71 62 Door Hold Backs pg 69 Chevy/GMC............................... 6-16 Body Hardware & Mirrors................... 6-7 Radiators............................................ 8 Exhaust............................................... 9 Fuel Tanks........................................... 9 Misc. Parts.......................................... 10-11 Brakes................................................ 12-16 Ford/Sterling............................. 17-20 Mirrors................................................ 17 Radiators............................................ 18 Exhaust............................................... 19 Fuel Tanks........................................... 19 Misc. Parts.......................................... 20 Freightliner............................... 21-26 Front End Parts................................... 21 Door Handles...................................... 22 Mirrors................................................ 23 Fuel Tanks........................................... 23 Brakes................................................ 24 Radiators............................................ 25 Exhaust............................................... 26 Hino/Isuzu/Mitsubishi/UD........ 30-37 Hino.................................................... 30-31 Isuzu................................................... 32-35 UD...................................................... 36 Mitsubishi............................................ 36 Sprinter............................................... 37 International............................. 38-51 We Want to Help you Fix Your International Navistar! pg 48 pg Front End Parts................................... 38 Door Hardware................................... 39 Engine................................................ 40 Heater................................................. 41 Mirrors................................................ 42-43 Radiators............................................ 45 Air Coolers.......................................... 46 Fuel Tanks........................................... 47 Brakes................................................ 48 Exhaust............................................... 49-51 Roll Up Door............................. 52-61 Todco.................................................. 54-57 Whiting................................................ 58-59 Diamond............................................. 60 Hackney & Mickey.............................. 61 Miscellaneous.......................... 62-75 Lights........................................ 76-92 38 LED..................................................... 76-89 Incandescent...................................... 86-92 Lift Gate.................................... 93-95 pg pg pgs 49-51 47 pg 45 38 pgs pg 39 pg 38 42-43 REPLACEMENT 2 CARGO CONTROL 800-888-5072 • MillSupply.com WHEEL CHOCKS CARGO STRAPS Sale Price Reg. Price Good Thru 8/31/2016 84-512 ..... 12 foot.......$12.42....... $9.95 2” Wide x 12’, 16’ or 20’ E-Strap with Cam style buckle. Uses weather resistant, 4500 lb. rated, 2” yellow strapping. 84-516 ...... 16 foot.......$13.64..... $11.70 84-520 ..... 20 foot.......$15.52..... $12.20 48” fixed end length. Working load limit of 833. lbs. Sale Price Reg. Price Made of Tough Reinforced Rubber Resistant to Sun, Salt, Oil and Acid 76-590 Heavy-Duty Rubber Wheel Chock with Anchor for Chain & Hand Hold Height: 8-1/4" Road Contact: 7" x 10-1/4" Weight: 11.15 lbs. Sale Price Good Thru 8/31/2016 $29.95 Good Thru 8/31/2016 84-312 - 12 foot with 3-piece end fitting.................... $27.30.....$23.40 84-212 - 12 foot with spring loaded end fitting........... $26.11.....$23.40 Reg. Price 2” Wide x 12’ Ratchet Buckle E-Strap. 48” fixed end length. Assembled using heavy-duty 12,000 lb. weather resistant 2” yellow polyester webbing. Working load limit: 1000 lbs. SERIES E ALUMINUM SHORING BEAM Series E Aluminum Decking/Shoring Beam Assembly with spring loaded end latch assembly. 2200 lb. Working Load Limit Sale Price Reg. Price Good Thru 8/31/2016 84-584 - 84.5”-95.4” Beam Assy......... $62.70......... $53.30 84-593 - 93”-102” Beam Assy............. $67.83......... $56.75 1+ $38.89 6+ $35.81 50+ $33.91 76-595 Heavy-Duty Rubber Wheel Chock with Handle Height: 5" Road Contact: 10" x 8" Weight: 8.00 lbs. Reg. Price $30.38 Sale Price Good Thru 8/31/2016 Replacement Parts $17.34 43627-10 - End Assembly with spring loaded end fitting. Can be used with old or new aluminum beams. Order the rivet pin 41338-10 separately. 1+ $19.98 6+ $17.98 12+ $15.98 41338-10 - Rivet Pin for End Assembly 1+ $1.20 6+ $0.98 5 foot can ship UPS 10 foot ships Freight HORIZONTAL SERIES E-TRACK • Powder coated 84-250 E-Track, 5 ft. length ......$14.76 • 5 or 10 foot long 84-500 E-Track, 10 ft. length 1+ $ 26.54 • 12-gauge steel 10+$23.88 • 50,000 lbs. minimum yield • Can be attached by screws, rivets or welded ROPE RINGS 84-601 – Recessed Rope Ring • 285 lb. Safe working load • Zinc plated • Requires 3” diameter mounting hole in 3/8” or thicker material (not for lifting). 1+ $1.82 6+ $1.62 12+ $1.54 B-32F – Surface Mount Rope Ring • 2000 lb. Working load limit • Zinc plated • 3/8” forged rope ring • Do not use for lifting 1+ $5.98 B-20 – Surface Mount Rope Ring • 800 lb. Working load Limit • Zinc plated • ¼” dia. Ring & formed steel clamp • Do not use for lifting 1+ $2.06 12+ $1.80 Sale Price Good Thru 8/31/2016 $26.64 76-770 Aluminum Wheel Chock 28,000 lb. capacity Height: 5-1/4" Road Contact: 6" x 7" Weight: 1.50 lbs. Reg. Price $20.81 76-530 Rubber Wheel Chock Height 5", Serrated Base Road Contact: 5" x 6" Weight: 2.35 lbs. Sale Price Good Thru 8/31/2016 $8.95 Reg. Price 1+ $12.36 6+ $10.97 24+ $ 10.38 400lb Work Load Limit 76-550 Rubber Wheel Chock Sale Price Height 5", Serrated Base Good Thru 8/31/2016 Road Contact: 8" x 6" $15.50 Weight: 5.9 lbs. Reg. Price 1+ $19.40 6+ $18.43 84-105 - 20’ Pull Strap, 1” Wide with ‘S’ Hooks, with 4 ft. fixed end 1+ $15.73 12+ $14.15 8L4242 - 15’ Ratchet Strap, 1” Wide with ‘S’ Hooks with 1 ft. fixed end $$22.88 Sale Price Good Thru 8/31/2016 $45.00 76-585 Yellow Composite Wheel Chock with 32” Rope Safety yellow recycled composite, Height: 4" Road Contact: 9-1/2" x6" Weight: 10.50 lbs. Reg. Price $53.95 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT MIRRORS 800-888-5072 • MillSupply.com 3 WEST COAST MIRROR HEADS W-180 7” x 16” Steel Head (White) with 5/16” stud $13.14 600807 7” x 16” Stain.Steel. $29.31 600682 - 7” x 16” White $29.69 1159 ML-10132 7 “ x 16” Aluminum (White) with 5/16” stud $29.14 HEATED 7"X16" Polished S.S. mirror head with nonglare glass. Universal 5/16" stud mounts with lock nuts. $22.50 HEATED S-158KDV S-158-K 6” x 16” Aluminum Flange Mount with Yellow Chevrons $30.69 S-158-K1 Glass Only $5.85 HEATED 6” x 16” Aluminum Double Vision with Convex Spot Mirror on Bottom. With Yellow Chevrons $42.13 HEATED 7” x 16” Polished Stainless Steel with 5/16” studs 7” x 16” Mirror Heads. Heated mirrors have wire harness w/Bullet Plug for International GMC Kodiak $43.52 1162-H - Heated, with wire harness, 60-310 - Non-Heated Mirror Head $31.23 w/o plug (universal fit) $62.19 60-330 - Heated Driver Side $53.02 1162-IHO - Heated w/wire harness, 60-331 - Heated Pass. Side $53.02 with flat plug for Navistar. $68.50 1162 - Non-Heated, popular with M-616 - 7”x16” Heated Polished Stainless Steel, w/wire harness, w/o plug. $45.02 1157-H - 7”x16” Heated Polished Stainless Steel, w/wire harness, w/o plug. $46.26 60-345 - Same as 1157H but with harness & plug, for Navistar $61.15 STICK-ON SPOT MIRRORS STUD MOUNT SPOT MIRRORS 61-482 - 2” dia. $1.34 61-483 - 3” dia. $1.62 61-484 - 3-3/4” dia. $1.96 708560 - 8-1/2” Dia. Heated Spot Mirror, stainless steel, with “L” bracket, offset stud $18.61 723080 Stainless steel “L” Bracket for Spot Mirrors $5.18 718394-5 - Corner Mount Spot Mirror set. Dim: 2.5” x 3.25”. One pair of left & right $28.81/pr 61-455 - 5” Dia. with Stud & Clamp on Mtg., center mount stud, fits all tubular brackets, Black. $14.02 61-457 - Same but Stainless Steel $14.01 61-485 - “The Wedge” Corner Mount Spot Mirror, 3-3/8” Overall size $2.84 61-475 - 7-1/2” Dia. Spot Mirror. stainless steel with “L” bracket, with 1/4” offset stud $20.70 708556 - 8-1/2” Dia. Spot Mirror with “L” bracket, center mount stud. $11.09 61-486 - 4” x 5-1/2” Spot Mirror $2.90 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT 4 COMPLETE ROLL-UP DOORS r Have a Replacement Doo in about a Week! 800-888-5072 • MillSupply.com UNIVERSAL 3/4” DRYFREIGHT DOORS FIT SIZES 84” - 96” WIDE BY 76” - 90” HIGH Track not included, Counterbalance can be ordered separately Mill Supply’s 3/4" dryfreight painted-white wood doors include all the hardware for a quick and easy replacement of all the panels. The top panel includes the hardware and weatherstrip but is not assembled so it can be trimmed to fit different door heights. One complete side of the door can be trimmed to fit smaller door widths. Hinges are purposely not installed on one side and top so when trimmed to a smaller size your hinges and rollers will install with minimal effort. Door is 80% pre-assembled. Order Counterbalance separately. Track not included. Includes: NEW 82” - 90” height 96" WIDE DOORS AND COUNTERBALANCE ASSEMBLIES ite h ed W t n i a P 84” - MADE IN USA Door panels are Painted White, 7 ply, 3/4" top quality, medium density overlaid hardwood-faced plywood manufactured with a 2 step layup and waterproof glue bond. Top panel and one complete side can be cut to match original door. •Pre-Painted white •1" or 2” rollers •Tongue-and-groove joints •Head and bottom seals included •4 rows of hinges •Stainless Steel cables and rivet fasteners. If you need a rivet tool or would prefer finishing your door with bolts and nuts, see below. •Todco or Whiting style lock, lift handle and 18" looped pull strap •All door hardware is Zinc Plated (1" rollers) or E-COATED (2" rollers) •Counterbalance can be ordered Separately •Track not included idth 96” w 20-7090................ $34.40 43 Sets of Splined Step Bolts and Nuts. Order these if you prefer not to use the rivets provided. 20-7091................ $26.95 Air Hammer Rivet Set for mounting rivets that are included with the door All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT COMPLETE ROLL-UP DOORS 800-888-5072 • MillSupply.com REPLACEMENT ROLL-UP DOOR Order Your Counterbalance Assy Separately 3/4” Dryfreight Roll-Up Doors Door Part # Door Size Can be Trimmed to Roller Size Door Price CounterBalance 20-7085 $98.58 20-7087 $149.30 20-7044 90” W x 82"H 84" W x 76” H 1” $547.55 20-7036 90” W x 82”H 84” W x 76” H 2” $598.00 CB Price Includes: shaft, spring(s), winding plugs, cable drums, bearing assemblies 90"W x 82"H Doors includes six painted white 11" panels and one 16" top panel plus all hardware as noted above, less track. 20-7061 90” W x 90”H 84” W x 84” H 1” $569.50 20-7085 $98.58 20-7052 90” W x 90”H 84” W x 84” H 2” $630.70 20-7087 $149.30 NEW 20-7070 96” W x 90”H 90” W x 84” H 1” $569.50 20-7085 $98.58 NEW 20-7073 96” W x 90”H 90” W x 84” H 2” $630.70 20-7087 $149.30 90"W and 96"W x 90"H Doors includes six painted white 15” panels plus all hardware as noted above, less track. Doors with 1" rollers use a single spring counterbalance. Doors with 2" rollers use a double spring counterbalance. UNIVERSAL ROLL-UP DOOR PANELS TP-15........ $55.80 15” x 92” Top Panel 15” TOP PANEL 92” IP-11........ $46.80 Mill Supply carries universal wood door panels for a replacement on Todco and Diamond doors. These panels have a 92” width and can be cut at each end to provide the correct length. All panels are made of 3/4”, 7-ply premium plywood and are white in color. 11” x 92” 11” E PANEL T A I D E M TER IN IP-15........ $55.80 15” x 92” or 15” 92” BP-11....... $76.70 11” x 92” 11” or 15” PANEL BOTTOM 92” BP-15...... $85.25 Our panels are Tongue and Groove style and cannot be mixed with the Lap Joint Style We have included additional inside edge routing to mount hinges when narrowing doors. 15” x 92” MADE IN USA Make sure to check out or full selection of roll up door parts on pages 52-61 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. 5 REPLACEMENT PARTS for 38 INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com FRONT END PARTS New Style D Old Style M E A O F G L B O H I N 90" 37.250" P 14.500" K J C 32" New Style A....... 536-652............Grille, Durastar 4100-4400, 1300FBC, RXT, Workstar 73/7400 & 8500. OE No: 3564289C91, 3564289C92, ..................................3564289C93, 3564289C94, 3564289C95, 3564289C96, 3564289C97, 3564289C98, 3564289C99...........$328.50 B....... 536-657............Grille, modified style. Durastar 4100-4400, 1300FBC, RXT, Workstar 73/7400 & 8500.................................$328.50 C....... 585-888............Front Bumper, black, must be shipped freight...............................................................................................$459.38 C....... 585-759............Front Bumper, chrome, must be shipped freight............................................................................................$502.50 D....... 527-5109..........Right headlight assembly. 3300 & 4400 Series. OE: 3565430C91, 3565430C92, 3565430C93...................$196.93 E....... 527-5110...........Left headlight assembly. 3300 & 4400 Series. OE: 3565429C91, 3565429C92, 3565429C93.....................$196.93 F....... 527-5105..........Right headlight assembly. 4000 Series. OE: 3574387C91/C92/C93/C94, 4020384C91...............................$213.89 G....... 527-5106..........Left headlight assembly. 4000 Series. OE: 3574388C91/C92/C93/C94, 4020383C91..................................$213.89 H....... 527-5101..........Right headlight assembly. Workstar. OE: 3605817C92..................................................................................$228.84 I........ 527-5102..........Left headlight assembly. Workstar. OE: 3605816C92....................................................................................$228.84 J........ 527-5123..........Left LED marker light. 4100, 4200/LP, 4300/LP, 4400/LP. OE: 3561965C1.......................................................$17.15 J........ 527-5122..........Right LED marker light. 4100, 4200/LP, 4300/LP, 4400/LP. OE: 3561966C1.....................................................$17.15 Old Style K....... 85-575..............92" Unpainted front bumper. Durastar 4700-4900.........................................................................................$164.83 L....... 548-7102..........Right headlight bezel. 4000 & 8000 Series. OE: 1654294C1, 1661764C1, 3000078C1, 34004274, EE02004023..........$25.52 M....... 548-7101..........Left headlight bezel. 4000 & 8000 Series. OE: 1654293C1, 1661763C1, 3000077C1, 34004277, EE02004024.............$25.52 N....... HL-6054-H.......7x5 Rectangular halogen high/low beam.........................................................................................................$12.68 N....... HL-6052...........7x5 Rectangular high/low beam.......................................................................................................................$11.38 O....... 4097A..............Front turn signal light, fits Left or Right. OE: 1677715C91...............................................................................$39.63 P....... 9467.................Bulb socket harness with plug.........................................................................................................................$16.00 International 4000 Series 532-535................. $14.72 Hood cable, 18.5"L OE# 500827C1, EE02004001 International 4000, 4600/LP, 4700LP, 4800 1990-2001 International and Ford 532-100....................$3.24 532-520................... $9.91 Replacement hook for coil Hood Control Spring, 1-3/8" x 7"L spring hood cables. 5.25"L OE# 1675762C3 OE#: 4C4Z16492AA, 590279C2 International 2000-4000, 7000, 8000, Prostar 532-632...............$56.82 Hood Latch Replaces OE No: 3544924C1 International 4000 Series 1979-2011 527-498...................... $11.48 Hood Latch Kit International 4000 Series 532-530.................... $16.92 Hood cable, 29"L OE#: 483687C1, 483687C2, EE02004066 International 4000 Series 532-533......................$23.04 Hood cable, 24.25"L with 12.25" end cables. OE# 1669283C1, 1677457C1 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for 39 INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com DOOR HARDWARE Front View Front View Rear View Rear View Front View Rear View International 3000 & 4000 Series 527-2055.........................$30.33 Door Handle 1997-2007, Replaces OE: 1680789C91, 3550925C91, 3550931C91 International 4300, 4300LP 2002-2009 527-491....................$26.95 Window Crank Handle. Replaces OE: 3508990C4 International 4000 Series 527-533..................$43.04 Left Door latch 527-535..................$40.36 Right Door latch International 4000 Series 527-5103............... $37.22 Door Hinge 2002 Replaces OE: 3549259C1 International 3200 Comm Bus 41/42/43/4400 73/74/75/76/7700 85/8600 CXT/MXT 525-500............................ $67.44 Left Exterior door handle, black body with chrome handle, Replaces OE: No. 2594003C1 525-505............................ $67.44 Right Exterior door handle, black body with chrome handle, Replaces OE: No. 2594006C1 International 4000 & 7000 Series 2005-2011 548-6105................ $21.69 Left or Right Interior pull handle. Replaces OE: 2505201C1 International 4000 Series, 1990-05 527-579............................ $45.30 Right Window Regulator, Replaces OE: 1686705C91, 449767C93, 2018056 527-577............................ $45.30 Left Window Regulator, Replaces OE: 1686704C91, 449766C93, 2018054 Front View Rear View International 4000 Series 2003-11 527-494............................ $179.56 Right Power Window Regulator, Replaces OE: 3515113C92 527-495............................ $179.56 Left Power Window Regulator, Replaces OE: 3515112C92 International 5000 & 9000 Series 1986-2015 548-9101..............$62.07 Left Interior door handle, chrome Replaces OE: 1649758C1, 02023003 548-9102.............$62.07 Right Interior door handle, chrome Replaces OE: 1649759C1, 02023008 International 5000 & 9000 Series 1986-2015 548-5110...............$111.61 Exterior door handle. Replaces OE: 3550930C91 International Durastar 527-524................$33.59 Left Interior door handle, Replaces OE 2505424C1 527-526................$33.59 Right Interior door handle, Replaces OE 2505425C1 International 5000 & 9000 Series 2000-2015 548-3101..............$194.40 Exterior door handle, textured black. Replaces OE: 3518423C1 548-8102 - Door Weatherstrip, 167" long. Replaces Navistar OE: 3508972C6 Fits 1990-2014 International 3200, 4100, 4300/LP, 4400/LP, 7300, 7400, 7500, 7600, 7700 CXT, RXT, MXT, ProStar, LoneStar. $166.38 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for 40 INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com ENGINE COMPONENTS Silicone Hump Hoses Inside Dia. A Inside Dia. Hump hoses are used to compensate the variances when connecting pipes to the intake. Because of their design, they can provide a flex of up to 20 degrees for slight bends. Mill No/OEM No. 520-512 1629046C1 520-510 675723C1/C2 520-514 1811969C1 520-518 1675717C1 2024703C1/C2 520-516 2004578C2 2007370C1 2030772C1 C B Hump Hose, Silicone Application A Dim. International International International International International 1.95"5.00" 3" 2.00"2.50" 2.25" 2.20"3.60" 3.00" 2.40"5.40" 3.50" 2.45" 5.40" 3" B Dim. C Dim. International 4000 Series 1999-2004 527-489.................. $40.01 Motor Mount Black steel. Replaces OE: 479237C1 Part No. Price 520-512 520-510 520-514 520-518 520-516 $14.13 $8.63 $16.40 $38.93 $28.79 International 4000 Series 1997-2007 532-5105.......................... $39.85 Speed Sensor, Replaces OE: 3528003C1 International 4000 Series 1990-2004 527-490...................... $31.64 Shift Boot Replaces OE: 291068C2 International 4500/4600/4700 Series 527-493...................... $29.90 Shift Boot, Replaces OE: 286655C1/C2/C3/C4 WIPER PARTS 3 Quart Reservoirs have 3 mounting holes per side, 4 Quart has 4 mount holes per side and 6 Quart has 6 mount holes per side. T-Bolt Clamp, 3/4" Wide Band and Trunion, Stainless Steel, Spring Loaded 520-600 - T-Bolt Clamp, 3-1/16" to 3-3/8" 520-601 - T-Bolt Clamp, 3-3/8" to 3-11/16" 520-602 - T-Bolt Clamp, 3-9/16" to 3-7/8" 520-603 - T-Bolt Clamp, 4-1/16" to 4-3/8" 520-604 - T-Bolt Clamp, 4-9/16" to 4-7/8" Cargo Box Corner Cap for Morgan Olson Box Trucks $7.94 $9.58 $8.03 $8.98 $8.30 49-908 49-910 49-915 • 70 oz. capacity • Mounts flush to a flat surface • Grounding grommet built in • 4 mounting bolts • Mounting hole centers at 3-5/8” Wide x 6-1/2” High • 3, 4 or 6 quart capacity • Mounts flush to flat surface • Includes Pump Motor & Cap • Dim: 8-5/8” W x 11-1/4”H 49-907.............................$43.80 Reservoir and washer pump, 70 oz., mounts flush AV-19660 - 2-Wire Pigtail $0.00 49-917 531-222........................................................ $69.51 Passenger side corner cap. Includes hardware & sealant 531-225........................................................ $67.49 Driver side corner cap. Includes hardware & sealant 531-201.......................................................... $0.86 Corner light lens 531-203.......................................................... $3.78 Corner light base and pigtail International 4000 Series 2001-2012 527-492...................... $14.60 Wiper Nozzle Replaces OE: 3508990C4 49-908 - 3 Quart Reservoir.......... $33.15 49-910 - 4 Quart Reservoir.......... $39.77 49-915 - 6 Quart Reservoir.......... $42.20 49-917 - Pump Motor w/Packard connector & grommet............ $17.87 49-918 - 2-Wire Pigtail ............$7.11 14-002103 - Snap on Cap ..... $2.64 063360 - Thread on Cap ...... $10.01 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com 41 HEATER PARTS 51-121 51-122 51-123 51-125 51-124 Description Rotation Motor Length Diameter Motor Vehicle type Replaces OEM Numbers Price 51-121 Heater Motor w/blower wheel CW 4-1/8" 3" International 4000, 7000, 8000 Series. 3542611C2, 1013008, HA1705, 890099, 2540-01-537-6399 $151.84 51-122 Heater Motor w/blower wheel CW 4-1/2" 3" International 4100-4400 Medium Duty, 7000, 9000 Series, Prostar Linehaul Conv. 3674285C1, 1013013, 76989, 919529 $150.56 51-123 Heater Motor w/flange CCW 4-3/8" 3-1/4" International, Sterling 1999-2001, Ford L8000/9000 1993-97 1699949C1, 3541558C1, 35392 $40.90 51-124 Heater Motor w/flange CW 4-3/8" 3-1/4" International 4500-4900 1995 and before, 9600 & 9700 Series Premium Cabovers, 9200-9700 Series Premium Conventionals 169929C1, 3108009, 937752, HA1245, 1013004, 203123, 2809-541-109, 890063, 35280 $49.98 51-125 Heater Motor w/flange CW 4-3/4" 3-1/4" Fits 2000 Series Medium and Heavy-Duty trucks, S3400, 3600, 3700 and 3800 school bus models, 4500, 4600, 4700, 4800 and 4900 medium duty trucks S5000 series, severe service trucks 9600, 9700, 9800 premium cabovers 1669786C1, 937714, 35550 $64.43 Part No 52-018 - Plastic Blower Wheel, CW, offset hub, 5" dia. x 3" deep. Replaces # 465502C1. $13.25 B-448 - Dual wheel blower assembly. 12 Volt; uses one motor with dual shafts. Overall mounting surface dimensions: 13-7/8" x 4". Universal in design. $82.53 55-110 - Dual wheel blower assembly, 12 Volt. Uses dual shaft motor. Overall Dimensions: 6-1/2"H x 13-3/4"W x 5-1/2"D. Base dimensions: 5-1/4" x 13-3/4". Universal in design $143.38 51-518 - Resistor, 3 terminal. Fits International 2000, 4000 & 8000 Series. Replaces: 1696836C1, 2099004, 650179 $17.98 51-519 - Resistor, 4 terminal. Fits International 4500-4900 1996 & before, 9100-9400 Premium Conventionals, 9600-9800 Premium Cabovers Series. Replaces: 506552C1, 2013003, 650177 $15.39 53-639 - 3-Speed Rotary Heater Switch: 1" threaded shaft length. Off-Low-Medium-High. 5 spade terminals. $10.88 53-537 - Heater Knob, round with marked top. $1.71 532-5101 - HVAC Vent, IHC 4000 Series. Replaces OE: 3529263C1 $31.00 54-576 - Heater shut off valve. 5/8" Hose. Fits: International 4200-4300. Replaces: 369512-C92, 2411007. $18.54 54-577 - Heater shut off valve. 3/4" Hose. Fits: International 4200-4300, 5000-6000. Replaces: 367972-C92, 2413006 $30.24 50-604 - Evaporator Core. 12" x 8" x 2-3/8". Fits: International 4000, 7000 & 8000 Series Replaces: 3542576C2 $115.06 55-104 - Block Type Flange Expansion Valve. Fits: International 2000, 4000 and 8000 Series. Replaces: 2503783C91 $24.82 M-3200-12V - 12 Volt Defroster/Circulating fan with two speed switch on base. Black heavyduty die cast base. Chrome guard. 280 CFM. 7-1/2" Cage Diameter; 9-1/2" Overall Height. $72.33 M-1000-12-V - 12 Volt Fan. All chrome, two speed motor with three position toggle switch. Three hole mounting. 230 CFM. 7-1/2" Cage Diameter; 8-1/2" Overall Height. $29.95 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. 42 REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR MIRROR ASSEMBLIES & PARTS BLACK LOOP MIRROR & BRACKET Y ASSEMBL 1” Chrome Tubing If your OE Mirror is Damaged You can Replace it with our Replacement Chrome Assembly Fits Vehicle: DuraStar 4100, 4200, 4200LP, 4300, 4300LP, 4400, 4400LP, 4700, 4700LP, 4700LPX, 4800, 4900, Hybrid, Mid-Cab. WorkStar 7300, 7400, 7500, 7600, 7700, Hybrid. TranStar 8100, 8100CH, 8200, 8500, 8600 (2002-Present); ProStar (2006-Present); TerraStar Class 4/5 (2010-Present) 611741 800-888-5072 • MillSupply.com (Bracket Mounts to Original Holes) 610872 405 Mirror Bracket System Rear View CHROME ENT EPLACEM R 611744 Spot Mirror not included 611788 610881 611761 Mirror Loop & Bracket Assemblies 611751 - Left Mirror Bracket Assembly, black ....... $168.50 Manual heads, Replaces OE: 2505274C3 611752 - Right Mirror Bracket Assembly, black ..... $168.50 Manual Heads, Replaces OE: 2505275C3 611753 - Left Mirror Bracket Assembly, black ....... $218.82 with Harness for heated heads, OE: 2589149C2 611754 - Right Mirror Bracket Assembly, black ..... $218.82 with Harness for heated heads, OE: 2589150C2 Glass Only 611740 - Flat Glass only, non heated....................... $43.25 7-5/8"W x 16-3/4"H, OE: 2505813C2 611741 - Flat Glass only, heated............................... $69.26 7-5/8"W x 16-3/4"H, OE: 2505814C2 611743 - Convex Glass only, non heated................. $52.22 7-5/8"W x 7-5/8"H, OE: 2505815C2 611744 - Convex Glass only, heated......................... $63.75 7-5/8"W x 7-5/8"H, OE: 2505816C2 Note: The heated mirror heads do not have the OEM connectors and will have to be spliced into the existing wire system. Replacement Chrome Assembly & Parts 611763 611761 611788 611786 61-475 612994 Passenger side assy. Includes: chrome mirror loop, ........$178.86 upper & lower mounts, and west coast mirror head Driver side assembly. Includes: chrome mirror loop, ........$178.86 upper & lower mounts, and west coast mirror head Passenger side mirror loop w/cab feet. Mirror not incl......... $150.42 Driver side mirror loop w/cab feet. Mirror head not incl..... $141.00 7-1/2" Round SS convex spot mirror w/L bracket................$20.70 Dovetail clamp (2 pc) for 1" loop to mount 61-475................ $7.30 8" x 17" West Coast Mirror Heads 610872 610878 610873 610879 Black non-heated plastic mirror w/clamp mounts...............$54.90 8" x 17". Fits 3/4" - 1-1/8" mirror loops. Chrome non-heated plastic mirror w/clamp mounts...........$65.55 8" x 17". Fits 3/4" - 1-1/8" mirror loops. Black heated plastic mirror w/clamp mounts.......................$62.00 8" x 17". Fits 3/4" - 1-1/8" mirror loops. Chrome heated plastic mirror w/clamp mounts...................$72.64 8" x 17". Fits 3/4" - 1-1/8" mirror loops. 8" x 8-1/2" West Coast Mirror Heads 611737 Glass Size 6.75 x 6.75" 404 Mirror System Rear View 611736 611735 - Left Fender Bracket Assembly, black............$76.48 611736 - Right Fender Bracket Assembly, black..........$76.48 611737 - Convex Mirror Head, black, 6.75" x 6.75"......$55.82 610875 610881 610876 610882 Black non-heated convex mirror w/clamp mounts..............$42.50 8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops. Chrome non-heated convex mirror w/clamp mounts..........$54.95 8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops. Black heated convex mirror w/clamp mounts......................$48.16 8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops. Chrome heated convex mirror w/clamp mounts..................$64.57 8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops. All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS that fit REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com 43 MIRROR ASSEMBLIES LOWER MIRROR MOUNT WEST COAST MIRROR ASSEMBLIES & PARTS 33-79-351 Mirror Arm Loop Assembly. Fits Left or Right (Less Mirror 60-330 or 60-331) 60455 We carry a replacement Lower Mirror Mount Replaces Lower OEM Mirror Assembly Mount Our Lower Door Mirror Mount is suitable for a variety of Medium to Heavy Duty applications. This replacement restores the side view mirror to proper operation, helping to reestablish clear visibility behind and to the sides of the vehicle. • • • • High-quality construction for long-lasting durability Direct replacement for a proper fit Bolts easily onto the door Vehicle try-on testing has been conducted on this part to ensure trouble-free performance Fits: • 2002 – 2006 International 3000 • 2002 – 2008 International 4000 • 2002 – 2011 8000 • 2008 – 2011 LoneStar • 2007 – 2009 ProStar • 2006 – 2008 RXT • 2010 – 2011 TerraStar 60-455..........................$25.49 Driver’s side lower mirror mount 60-456..........................$25.78 Passenger side lower mirror mount 33-79-351................................................. $46.30 Aluminum Mirror Arm Loop Assembly w/o Mirror Heads. Can be used on Left or Right. Fits S Series International/Navistar 1979–Mid 2002 7” x 16” Mirror Heads. Heated mirrors have a Bullet Plug that fits Navistar International 60-310.......$31.23 Non-Heated Mirror Head 60-330...... $53.02 Heated Driver Side 60-331...... $53.02 Heated Pass. Side 7”x16” Heated Polished Stainless Steel, w/wire harness 1157-H............$46.26 Heated with harness without plug. 60-345........... $61.15 Heated with Harness with plug for Navistar 7”x16” Polished Stainless Steel Mirror Heads 1162........... $43.52 Non-Heated 1162-IHO..... $68.50 Heated w/flat plug for Navistar on harness. STUD MOUNT SPOT MIRRORS 61-455............$14.02 5” Dia. with Stud & Clamp on Mtg., center mount stud, fits all tubular brackets, Black. 61-457............$14.01 Same but Stainless Steel 612994........$7.30 Dovetail clamp for 1" tube, 2 pc clamp 708560.......... $18.61 8-1/2” Dia. Heated Spot Mirror, stainless steel, with “L” bracket, offset stud 61-475............ $20.70 7-1/2” Dia. Spot Mirror. stainless steel with “L” bracket, with 1/4” offset stud 708556... $11.09 8-1/2” Dia. Spot Mirror with “L” bracket, center mount stud 723080...... $5.18 Stainless steel “L” Bracket for Spot Mirrors All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. 44 REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com TURN SIGNALS 536-500........... $80.54 Turn Signal Switch, OEM Navistar Replacement, 7 wire, Operates up to 10 bulbs 536-545........... $86.86 Turn Signal Switch, OE Navistar Replacement, Operates up to 18 lights • Replaces Navistar #166355C91 • Replaces Navistar #2042616C91 & 3566945C91 • Capable of 18 lamps, 9 lamps per side • Feature Lift-to-Dim & Flash-to-Pass options • Brake overrides hazard function lights when brake pedal is depressed • 7 wire harness • Pilot light for turn signal & hazard warning • 10 bulb capacity, 5 bulbs per side 536-505........... $86.86 Turn Signal Switch, OEM Navistar Replacement, Operates up to 16 lights • Replaces Navistar #2002874C91 & 3566935C91 • Capable of flashing 16 lamps, 8 lamps per side • Brake overrides hazard function lights when brake pedal is depressed 536-510............$67.47 Turn Signal Switch, OEM Navistar Replacement, Operates up to 16 bulbs • • • • Replaces Navistar #1663595C91,775863C93 7 wire harness Pilot light for turn signal & hazard warning 10 bulb capacity, 5 bulbs per side 536-523........... $86.86 Turn Signal Switch, OEM Navistar Replacement, Operates up to 18 lights • Replaces Navistar #2042615C91 & 3566944C91 • Capable of 18 lamps, 9 lamps per side • Brake overrides hazard function lights when brake pedal is depressed • Includes OEM specific connectors for retrofitting 536-530........... $85.59 Turn Signal Switch, International Navistar Replacement, Operates up to 18 lights • Replaces Navistar #2042613C91 & 3566942C91 • Capable 18 lamps, 9 lamps per side • Feature Lift-to-Dim & Flash-to-Pass options • Brake overrides hazard function lights when brake pedal is depressed 536-573........... $90.97 Turn Signal Switch, OEM Navistar Replacement, Operates up to 16 lights • Replaces Navistar #200792C91 & 3566939C91 • Capable of 16 lamps, 8 lamps per side • Includes self-canceling feature • Brake overrides hazard function lights when brake pedal is depressed • Includes OEM specific connectors for retrofitting 536-596........... $86.50 Turn Signal Switch, OEM Navistar Replacement, Operates up to 16 lights • • • • Replaces Navistar #2034527C91 Capable of 16 lamps, 8 lamps per side Includes self-canceling feature Brake overrides hazard function lights when brake pedal is depressed 536-525........... $86.86 Turn Signal Switch, OEM Navistar Replacement, Operates up to 18 lights • Replaces Navistar #2042613C91 & 3566942C91 • Capable of 16 lamps, 8 lamps per side • Features a sealed boot to eliminate dust intrusion • Includes self-canceling feature • Brake overrides hazard function lights when brake pedal is depressed 536-526........... $86.86 Turn Signal Switch, OEM Navistar Replacement, Operates up to 18 lights • Replaces Navistar #2002875C91 & 3566936C91 • Capable of 16 lamps, 8 lamps per side • Features a sealed boot to eliminate dust intrusion • Includes self-canceling feature • Brake overrides hazard function lights when brake pedal is depressed All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS that fit REPLACEMENT PARTS for 45 INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com RADIATORS International 527-487.................. $15.86 Radiator Mount, rubber, Dim: 1.938" base x 1.5"tall Replaces OE: 503401C1, 503401C2, 42002055 548-9110.....$210.24 Pressurized Coolant Reservoir with cap Fits 1990-2016 International 4000 Series 85-099........$97.66 Coolant Reservoir with cap Fits 2002-2007 International 4000 Series Replaces OE#: 2602935C91, 2591625C92, 2599039C91, 2602872C91, 2602935C91, BC4Z8A080A, 4C4Z8B379A (Ford). Non-direct crossover #: 2039390C3, 2587324C1, 3578833C3 Replaces OE#: 2002105C3 Even more radiators at MillSupply.com! 239328 •Radiators are built to meet or exceed OEM specifications •Many radiators offered in Copper/Brass as well as Plastic/Aluminum construction options •Heavy Duty 4 and 5 row options available for some models •Depth of Inventory goes beyond the normal top 25 sellers •Largest in-stock inventory of Truck & Bus Condensers & Charge Air Coolers. Call us with your needs Part Description Number 239328 239329 239179 239019 239081 238580 230271 238522 Radiator (without cooler) Replaces the thicker OE aluminium units-exceeds but transfer requirements for proper cooling. For radiator with cooler see 239329 Radiator (without cooler) replaces the thicker OE aluminum units-exceeds but transfer requirements for proper cooling. Heater Fitting: 5/8" Hose" x 3/8" NPT Radiator w/o PTO Crankbox, Full Core. Crossflow radiator. Radiator w/o PTO Crankbox, Full Core. Radiator w/o PTO Crankbox., Full Core. Oil cooler on grill side. Has extra 1-1/4" connection on outlet 3 row International / Navistar Radiator w/ 6" x 6" PTO crank box. 90 degree outlet. Radiator w/o PTO Crankbox., Full Core. Supersedes 230328, for 4 row see 238562. Radiator w/o PTO Crankbox., Full Core. Straight 2-1/4" lower connection with cooler on grill side. Without cooler see 238519. Application Dimensions Inlet Outlet 2-1/4" Lower Right, 11-1/4" In Oil Price Cooler 04-07 F650-F750, 02-07 International 3000, 3600, 20-5/8" 3800, 4100-4600 25" 1-3/4" 2-1/4" Lower Left, 11-1/4" In 04-07 F650-F750, 02-07 International 3000, 3600, 20-5/8" 3800, 4100-4600 25" 1-3/4" 2-1/4" Lower Left, 11-1/4" In 22" 24-7/8" 2-1/4" 2-1/4" Right Center 14-3/8" Down Grill Side - 18" Centers With 2-1/4" Lower #12 SAE Right, 11-1/4" In Fittings 2-1/4" Left Center 14-3/8" None Down 22" 28-3/8" 2-1/4" 2-1/4" - 17-1/2" Down 2-1/4" - 17-1/2" Down 28-3/4" 26-1/4" 2-1/4" 2-1/4" Upper Right 29-3/4" 26" 2-1/16" 2300, 3000, 3600, 3800, 4900 Series 31" 26" 1-9/16" 2-1/2" Upper Center 2-1/2" Upper Center 2-1/2" Lower Left With Extra 1-1/4" Connection 2-1/2" Lower Right 2-1/2" Lower Right 4400, 7300 Series 30-1/2" 12-1/4" 2-1/16" 2-1/2" Upper Center 2-1/4" Lower Left 2005-2007 International / Navistar 3000, 3600, 3800, 4100 - 4400 2005-2007 Models 3800, 4100, 4200, 4300, 4400 and 2002-2007 Model 8500 2008-2010 International 4000 Series None $464.73 $620.03 $642.61 None $723.40 Grill Side $959.71 18" Centers $992.50 18" Centers $757.88 Grill Side $616.15 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. 46 REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com CHARGE AIR COOLER 580-506 - Charge Air Cooler with straight connections $675.22 CORE HEIGHT... 41-1/4" Replaces OE: 2508432C1 CORE WIDTH....24-5/8" Fits: 7600 International/Navistar THICKNESS......... 1-5/8" 580-505 - Charge Air Cooler with connections that curve up slightly $802.30 Replaces OE: 2004399C1 CORE HEIGHT... 41-1/4" Fits: 1994-1999 8200, CORE WIDTH....25-1/8" 1998-2003 9100, 9100I Eagle, THICKNESS......... 1-5/8" 1997-2003 9200, 9200I Eagle, INLET......................... 4" OUTLET..................... 4" 1997-2006 9400, 9400I, 1999-2007 9900, 9900I, 9900IX 580-504 - Charge Air Cooler with connections that curve up and in slightly. $781.37 Replaces OE: 1696958C1 Fits: 1991-2002 8100 Series CORE HEIGHT...35-5/8" CORE WIDTH....25-1/8" THICKNESS......... 1-5/8" INLET......................... 4" OUTLET..................... 4" 580-503 - Charge Air Cooler $561.97 Replaces OE: 1696920C1 Fits: 3000, 4000 Series, Class 6 and S-line, 1994-1999 4900 Series CORE HEIGHT...23-1/4" CORE WIDTH.... 12-1/2" THICKNESS.........2-1/2" INLET......................... 3" OUTLET..................... 3" INLET......................... 4" OUTLET..................... 4" 580-502 - Charge Air Cooler $663.56 Replaces OE: 1651980C1 CORE HEIGHT........27" CORE WIDTH......... 19" Fits: Bluebird Bus, THICKNESS..............3" 1991-93 9670, 9700 with INLET........................4" Cummins N14 Cat 3406 Engines. OUTLET....................4" 580-501 - Charge Air Cooler $666.97 Replaces OE:1646077C1 Fits: Bluebird, Carpenter, Spartan, 3000/4000 Medium Duty Trucks, S-Line, Class 6 & 7 Fire Trucks CORE HEIGHT........23" CORE WIDTH...29 7/8" THICKNESS........ 1-1/2" INLET..................3-1/2" OUTLET..............3-1/2" Charge Air Cooler Hoses, Hot Air Side 520-605 - 6"L x 3" Dia 520-606 - 6-1/2"L x 3-1/2" Dia 520-607 - 7-1/2"L x 4" Dia. Charge Air Cooler Hoses, Cold Air Side 520-608 - 6"L x 3" Dia 520-609 - 6-1/2"L x 3-1/2" Dia 520-610 - 6-1/2"L x 4" Dia. $19.73 $20.31 $27.27 $17.28 $17.57 $23.05 580-500 - Charge Air Cooler $703.50 Replaces OE: Fits: International 97 4800, 00-01 4700, 95 4700, 90 4700, 99-02 4900,90-97 4900 CORE HEIGHT........24" CORE WIDTH...33-3/8" THICKNESS........ 1-5/8" INLET........................4" OUTLET....................4" T-Bolt Clamp, 3/4" Wide Band and Trunion, Stainless Steel, Spring Loaded 520-600 - T-Bolt Clamp, 3-1/16" to 3-3/8" $7.94 520-601 - T-Bolt Clamp, 3-3/8" to 3-11/16" $9.58 520-602 - T-Bolt Clamp, 3-9/16" to 3-7/8" $8.03 520-603 - T-Bolt Clamp, 4-1/16" to 4-3/8" $8.98 520-604 - T-Bolt Clamp, 4-9/16" to 4-7/8" $8.30 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com 47 DIESEL FUEL TANKS AND STEPS 50 Gallon Tank • Height: 16.5" • Width: 25.25" • Length: 34.5" 70 Gallon Tank • Height: 19.5" • Width: 25.25" • Length: 40" 581-730 581-743 Drivers Side Shown 581-550 - 50 Gallon Right Side Rectangular Steel with Step Inset. Filler on left, 14"H X 25"W x 38"L $988.80 581-553 - 50 Gallon Left Side Rectangular Steel with Step Inset. Filler on right, 15"H X 25"W x 37"L $988.80 581-725 - Mount Kit, (2) L Brackets, (2) Straps $375.20 581-730 - 2 Mounting Kit Straps $177.80 581-950.... 50 Gallon Driver Side Aluminum D Tank..................$907.20 581-951.... 50 Gallon Passenger Side Aluminum D Tank..........$907.20 581-970.... 70 Gallon Driver Side Aluminum D Tank...............$1,198.00 581-971.... 70 Gallon Passenger Side Aluminum D Tank.......$1,275.00 548-6106.. Upper fuel tank step, 27-3/4" x 5", Black steel........$156.83 548-6104.. Lower fuel tank step, 32" x 5", Black steel.................$65.06 581-743.... Fuel tank strap with step support. 43.60" long,.......$92.80 2" wide. For use w/50 gallon tanks, 581-950 or 581-951 Replaces OE 3533106C2/C3 581-745.... Fuel tank strap w/o step support. 43.60" long,........$67.20 2"wide. For use w/50 gallon tanks, 581-950 or 581-951 548-6101 - Fuel tank step, 32.8" x 6.5". Painted black steel. Bolts on strap. Fits 2001-2011 International $57.31 548-6102 - Fuel tank step, 35.3" x 5". Painted black steel. Bolts on strap. Fits 2001-2013 International $47.53 581-465.... $1,365.00 65 Gallon Passenger Side Bus Fuel Tank. Fits International, Thomas and Bluebird buses. 66"L x 13"H x 20"D. 581-101.......... $120.62 Fuel Sender Fits 2002-2011 International 4000 Series Replaces OE#: 2585993C91 581-104............ $81.86 Fuel Sender Fits 1997-2011 International 4000 Series Replaces OE#: 476846C1, 476846C2 548-5102 - 44" x 3" Fuel tank strap for 50 and 60 gallon square tanks. Fits 1997-2011 International. Replaces OE: 471453C2 $61.81 548-6103 - Fuel tank step, 36" x 6.8". Aluminum. Bolts on strap. Fits 2009-2012 International $82.98 FOR UNIVERSAL FILLER NECKS SEE PAGE 73 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. 48 REPLACEMENT PARTS for INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com BRAKE PARTS D184 D225 510-730 10-699 510-744 510-750 510-785 510-791 510-224 D786, D786A 10-851 10-807 10-827, 10-828 SD647 10-833, 10-834 510-780 4200LP 4300, 4300LP, 4400, 4400LP, 4700, 4700LP Disc Pads, Brake Shoes and Hardware Disc Pad Set Disc Pad Set Disc Pad Set Disc Pad Set Disc Pad Set Brake Shoe Drum Brake Kit 1998-2007 1990-1997 F&R F&R F&R F&R Front L&R L&R L&R L&R L&R 1992-2007 1992-2007 510-790 w/66mm dual piston, pin slide caliper. Use with 10-833 caliper w/73mm dual piston, pin slide caliper. Use with 10-834 caliper w/2.60 dual piston, rail slide Bendix caliper. Use with 10-827 caliper w/2.88 dual piston, Bendix Caliper. Use with 10-828 caliper w/3.38 single piston, rail slide Bendix Caliper Drive line Parking brake w/9 x 3 Drum brake transmission parking brake kit D-786 D-786A D-184 D-225 D-184 SD-647 10-807 $91.71 $90.49 $76.72 $62.84 $76.72 $40.95 $7.40 10-833 10-834 10-827 10-828 510-224 10-928 10-927 10-925 10-924 10-922 10-923 10-851 $117.81 $105.00 $105.60 $91.05 $28.68 $0.85 $1.19 $0.83 $0.38 $4.94 $4.32 $15.99 510-744 510-791 510-785 510-780 510-790 10-699 $135.98 $132.81 $157.23 $272.91 $159.56 $124.44 Calipers and Hardware - NEW NO CORE RETURN Caliper Caliper Caliper Caliper Disc Hardware Kit Anti Rattle Clip Rubber Bushing Guide Pin Bolt Bushing Guide Pin w/groove Guide Pin Brake Hardware Kit Rotors Rotor 10 hole Rotor 10 hole Rotor 5 hole Rotor 5 hole Rotor 6 hole Rotor 10 hole 1998-2007 1998-2007 1992-1997 1991-1997 1998-2007 1998-2007 1998-2007 1998-2007 1998-2007 1998-2007 1998-2007 1992-1997 F&R F&R Front Rear F&R F&R F&R F&R F&R F&R F&R F&R L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R w/ 66mm dual piston, slide pin style, Casting #4153269. Uses pad D-786 w/ 73mm dual piston, slide pin style, Casting #4153222. Uses pad D-786A w/2.60" piston dia. Casting #4121733. Uses pad D-184 w/2.88 piston dia. Casting #4150844. Uses pad D-255 10-923 10-922 66mm or 73mm dual piston, pin slide caliper Brake pad clip, sold each, 4 needed per axle set Rubber bushing for guide pin, sold each 10-925 10-924 1.5" long, sold each Used with 10-922, sold each Used with 10-924, sold each 10-928 10-927 without groove. Sold each (2) Support Springs, Keys, .025 & .045 shims, caliper bolts 1998-2007 1992-2007 1992-2007 1992-2001 1992-2001 1992-1997 F&R F&R F&R F&R Front F&R L&R L&R L&R L&R L&R L&R w/ hat shape 10 hole rotor, 3.20" tall, cast in ABS exciter w/ hat shape 10 hole rotor, 4.45" tall, cast in ABS exciter w/ hat shape 5 hole rotor, cast in ABS exciter ring w/ U shape 5 hole rotor, 5.9" tall, .771 stud hole w/ hat shape 6 hole rotor, except ABS w/ hat shape 10 hole rotor, 4.43" tall CF500, CF600, CITYSTAR Rotors Rotors, standard Rotors, standard 2006-2007 2006-2007 Front Rear L&R L&R Hat shape 10 hole rotor, 14.53" dia, 3.88"H, 5.09 hole dia Hat shape 10 hole rotor, 15.35" dia, 4.89"H, 5.49" hole dia 510-750 510-730 $143.07 $148.00 All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for 07-08 4000 SERIES, S SERIES, & DURASTAR 4300 International DT466 Engine, Max Force DT 3 A B 6 Cyl. 4300 w/ T444 Turbo Diesel 7 3 MADE IN USA D C 2001 MADE IN USA E 6 5 1 04-05 8 Cyl. 1 1 F 6 Cyl. 00-01 6 Cyl. 96-00 6 Cyl. MADE IN USA 2 D G 6 05-06 4 E E 4300 w/ T466 Turbo Diesel 4300 w/ DT408, DT466 NGD Diesel; w/ Code 07ABC 7 3 5 6 2 L O 2 4300 w/ VT365 Diesel 3 Dump Stacks availa ble at millsupply.com ALUMINIZED EXHAUST PARTS rts for More Exhaust Pa line International On- 49 INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com 6 4 2 L MADE IN USA E P 4300 International w/ DT466 & VT365 Engines 94-99 8 Cyl. 4500, 4700, T444E Diesel Engine; Left Frame Mounted Short Tail Pipe; Code 07AAZ 3 MADE IN USA MADE IN USA D H E C 9 5 6 6 1 1 6 V 2 2 L E 7 4 00-02 6 Cyl. 4300 International DT466 Engine, Left Side Exhaust 7 7 Go to MillSupply.com for our full selection of exhaust parts! MADE IN USA 6 3 6 2 L K 2 M J 8 N 8 Exhaust Pipes & Mufflers A....Turbo Pipe...................................557-550....$131.88 M....Extension Pipe............................557-530.. $61.20 B....Extension Pipe............................557-532......$74.88 N....Tail Pipe.......................................557-573.. $61.95 C....Extension Pipe............................557-534......$62.34 O....Turbo Pipe................................. *557-556.$145.47 D....Muffler & Catalytic Converter......557-526.$1,396.28 P....Turbo Pipe................................. *557-558.$124.14 E....Tail Pipe.......................................557-104......$27.09 Q....3” x 18” Flex Pipe..........................57-226.. $23.78 F....Turbo Pipe...................................557-551......$41.82 S....Extension Pipe (140” WB)...........557-539.. $31.24 G....Extension Pipe............................557-536......$28.00 S....Extension Pipe (236-254” WB)....557-535.$118.58 H....Turbo Pipe................................. *557-552......$88.51 T....Extension Pipe (170-206” WB)....557-533.$140.70 H....Turbo Pipe................................. *557-554......$96.83 U....Tail Pipe.......................................557-579.$119.98 J.....Turbo Pipe................................. *557-553....$136.98 V....3.5” x 18” Flex Pipe.....................557-193.. $25.10 K....Extension Pipe............................557-537......$52.73 L....Muffler.........................................557-520....$107.09 Hardware 1... 3” Clamp.........................557-130..... $9.43 2... 4” Clamp.........................557-140... $10.23 3... V Band Clamp................557-154... $21.65 4... Muffler Hanger................557-137... $41.56 5... Rubber Mount.................557-133..... $8.52 6... 3.5” S.S. Band Clamp.....57-228..... $10.55 7... Muffler Hanger................557-176... $53.03 8... Bracket............................557-131... $11.88 9... V Band Clamp................557-153... $18.84 * FREIGHT ITEM All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for 50 INTERNATIONAL/NAVISTAR ALUMINIZED EXHAUST PARTS ailable Dump Stacks av at millsupply.com 94-99 6 Cyl. 1 4000 SERIES, S SERIES, & DURASTAR 4000, DT408, DT466 NGD, 530 Diesel Engine; Right Frame Mounted w/o Beverage & Utility Body; Code 07AAY 4 B 2 C 2 D 2 A MADE IN USA 4000, DT408, DT466E, 530 Diesel Engine; Left Frame Mounted Muffler; w/ Short Tail Pipe 4 B 2 C 2 D 2 E F A MADE IN USA C - Std. Cab D - Exc. Std. Cab 3 94-99 6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Right Mounted Muffler; Short Tail Pipe; Codes 07BAG, 07AAY w/ Beverage Body 1 94-99 6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Right Cab Mounted Vertical Tail Pipe; (Exc. Allison MT653DR & MT643 Auto Trans.); 4 Codes 07ACX, 07ACY 1 C - Std. Cab D - Exc. Std. Cab 3 94-99 6 Cyl. 1 800-888-5072 • MillSupply.com 2 4 2 2 G 94-99 6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Travelcrew Cab w/ Left Frame Mounted Muffler; Vertical Tail Pipe 4 MADE IN USA 1 E A 2 2 2 H F G 3 2 94-99 8 Cyl. 4 C 4000, T444E Diesel Engine; Right Muffler & Vertical Tail Pipe; Code 07BAC 4 3 1 rts for More Exhaust Pa line nO l Internationa C 3 4000, DT408, DT466E, 530 Diesel Engine; Right Muffler Mounted 8” Back of Cab; Codes 07AMA, 07AAE w/ Short Tail Pipe 2 4 B 2 D MADE IN USA 3 6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Right Muffler Mounted 30” Back of Cab; Codes 07AMB, 07AAK w/ Short Tail Pipe 2 2 2 2 2 A A 1 4 4 A 94-99 4 MADE IN USA 2 B 94-99 6 Cyl. 1 2 MADE IN USA 4000, DT408, DT466E, 530 Diesel Engine; Right Mounted Muffler; Short Tail Pipe; Code 07AAL w/ Beverage Body 2 2 4 4 4 B MADE IN USA 94-99 6 Cyl. H 3 A B 4 B A 2 2 4 MADE IN USA B 4 MADE IN USA D H 4 2 J 3 Exhaust Pipes & Mufflers A.... 3.5” x 20” Flex Pipe.......................57-226.....$23.78 B.... Muffler.........................................557-520...$107.09 C.... Tail Pipe......................................557-104.....$27.09 D.... Tail Pipe......................................557-570.....$36.78 E.... Turbo Pipe...................................557-586...$149.58 F.... Extension Pipe............................557-531.....$49.72 G.... Elbow..........................................557-540.....$23.09 H.... 4” x 18” Flex Pipe........................557-194.....$26.49 J..... Muffler.........................................557-527...$128.69 Hardware 1.... V Band Clamp............................557-154.....$21.65 2.... 3.5” S.S. Band Clamp...................57-228.....$10.55 3.... Muffler Hanger............................557-176.....$53.03 4.... 4” Clamp.....................................557-140.....$10.23 A All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. REPLACEMENT PARTS for ALUMINIZED EXHAUST PARTS rts for More Exhaust Pa line nO l Internationa 94-99 8 Cyl. Dump Stacks availa ble at millsupply.com 4000 SERIES, S SERIES, & DURASTAR 4000, T444E Diesel Engine; Left Frame Mounted Muffler; Vertical Tail Pipe; Codes 07ACU, 07ACW 1 1993 6 Cyl. 2 4 4000, DT/DTA360; Left Frame Mounted; Long Tail Pipe; Side Exit; Code 07AAV 2 4 B G MADE IN USA 1 2 2 2 4 B 4 1993 6 Cyl. 90-92 6 Cyl. 1 E D A 94-99 3 8 Cyl. 4000 Travelcrew Cab, T444E Diesel Engine; Right Frame Mounted Muffler; Cab Mounted Vertical Tail Pipe; Code 07ACY 2 2 2 B MADE IN USA *1 91-99 1 G 3 C 4 3 6 Cyl. 4000, 4900; DT360, DT408, DT/DTA466 Diesel Engine; Right Mounted Muffler; Long Tail Pipe; Code 07AAX 2 2 K B MADE IN USA 4 4 A 4 M L 3 93-99 1 8 6 Cyl. 4000, DT408, 530, DT466 Diesel Engine; Left Mounted Muffler; Canada & Export Only; Code 07AAP *1 - 91-95 2 2 2 *5 - 88-90 F MADE IN USA H 2 J 91-93 8 Cyl. 4000, T444E Diesel Engine; Left Mounted w/ Long Tail Pipe; Codes 07AAS, 07AAV, 07AAX 4 2 2 2 B MADE IN USA A 2 2 F MADE IN USA A C N 6 6 Cyl. 4000, DT408/DT/DTA466 Diesel Engine; Temporarily Mounted Right Side Muffler; Code 07AAH 2 4 3 4 MADE IN USA 8 Cyl. 4000, 7.3L Diesel Engine; Long Tail Pipe; Right Mounting (Exc. Low Profile) Code 07AAX 8 9 9 8 *R 3 O 3 A 88-99 *5 B E A 94-99 7 2 *C - Exc. Crew Cab *R - Travel Crew Cab 4 4 4700 w/ DT 360 Diesel Engine; Right Side Mounting (Exc. Beverage Body) 4700 w/ DT/DTA 360 Diesel Engine; Right Side Mounting (Exc. Beverage Body) *C 4 1 3 MADE IN USA 4 4 51 INTERNATIONAL/NAVISTAR 800-888-5072 • MillSupply.com 8 4 P 4 MADE IN USA Q 10 Exhaust Pipes & Mufflers A.... 3.5” x 20” Flex Pipe....................... 57-226.... $23.78 B.... Muffler......................................... 557-520.. $107.09 C.... Tail Pipe...................................... 557-104.... $27.09 D.... Elbow.......................................... 557-540.... $23.09 E.... 4” x 18” Flex Pipe........................ 557-194.... $26.49 F.... Muffler......................................... 557-527.. $128.69 G.... Tail Pipe...................................... 557-572.... $64.32 H.... Turbo Pipe (96-97)...................... 557-586.. $149.58 J..... Turbo Pipe (Exc. DT408, DT360).... *557-555.. $124.21 J..... Turbo Pipe (DT360)...................*557-559.... $92.19 K.... Extension Pipe...........................*557-542.... $44.81 L.... Ext. Pipe (140” WB).................... 557-539.... $31.24 L.... Ext. Pipe (170”,176”,206” WB)..... 557-535.. $118.58 L.... Ext. Pipe (206” WB).................... 557-544.... $40.53 M.... Extension Pipe...........................*557-546.. $122.90 N.... Tail Pipe (68” OAL)...................... 557-579.. $119.98 O.... Muffler......................................... 557-525.. $120.24 P.... Extension Pipe............................ 557-530.... $61.20 Q.... Tail Pipe.....................................*557-572.... $64.32 R.... Tail Pipe...................................... 557-570.... $36.78 Hardware 1.... V Band Clamp............................557-154.... $21.65 2.... 3.5” S.S. Band Clamp................... 57-228.... $10.55 3.... Muffler Hanger............................ 557-176.... $53.03 4.... 4” Clamp..................................... 557-140.... $10.23 5.... V Band Clamp............................557-155.... $18.72 6.... Bracket........................................ 557-131.... $11.88 7.... V Band Clamp............................557-153.... $17.18 8.... 2.5” Saddle Clamp........................ 57-250...... $3.83 9.... 2.75” Clamp................................ 557-172...... $7.40 10.. Muffler Hanger............................ 557-188.... $25.90 * FREIGHT ITEM All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change. Manufacturer Index (Manufacturer index is detailed on page 1) Chevy/GMC............................... 6-16 Ford/Sterling.............................17-20 Freightliner............................... 21-26 Hino.........................................30-31 International.............................38-51 Isuzu........................................32-35 Mitsubishi...................................... 36 Sprinter......................................... 37 UD .............................................. 36 Category Index Adhesive Sealants........................74 Anti-Slip Paint & Tape...................74 ABS Sensors............................... 29 Back Alarms................................ 96 Brake Line Kit.............................. 29 Rear Bumpers............................. 63 Camera Systems......................... 75 Cargo Control................................ 2 Circuit Breakers........................... 92 Clean Up Products........................74 Dock Bumpers............................. 62 Document Holders....................... 75 Door Hardware....................... 68-72 Door Hold Backs.......................... 69 Draw Bars.................................... 64 E-Track.......................................... 2 Fenders, Poly............................... 65 Fuel Filler Necks, Univ................. 73 Grab Handles.............................. 72 Hinges.................................... 70-72 Hood Latches.............................. 73 Hydromax Brake Booster.................... 27 Lashing Rings.............................. 64 Liftgate.................................... 93-95 Lighting, All............................. 76-92 Lucas Girling Brakes................... 28 Markers........................................ 96 Master Cylinder........................... 27 Mirrors...................... 3, 6, 7, 17, 42, 43 Mud Flaps.................................... 65 Pintle Hooks & Mounts................ 64 Ramps......................................... 62 Reflective Safety Tape................. 96 Receiver Tubes............................ 64 Repair Tape & Panels...................74 Roll-Up Door........................... 52-61 Complete doors...........4-5, 52-53 Todco................................. 54-57 Whiting............................... 58-59 Diamond................................. 60 Hackney & Mickey.................. 61 Rope Rings.................................... 2 Spot MIrrors................................... 3 Steps........................................... 63 Triangle Reflector Set.................. 96 Turn Signal Switches................... 44 Ventilators.................................... 73 Wheel Chocks............................... 2 Wheel Rims................................. 67 Wheel Simulators.................... 66-67 Parts You Can't Forget! Aluminum hingeless two way vent. Door size: 9-1/2" x 4". Overall: 12" x 6-1/2" T-23170-AL.....Vent...... $27.30 M-1653...........Rod........ $5.50 M-1650...........Roller......$1.26 Need a little more sound? This selfadjusting back up alarm automatically adjusts to the noise level outside. Adjusts itself from 87 to 112 decibels. 5”W x 3-3/4”D x 3”H BA-1040........................$85.98 Sale Price Good Thru 8/31/2016 $17.25 Set of 3 orange fluorescent polypropylene triangle reflectors in a plastic carry case. M-1361...................Reg. $19.55 Our most popular back up alarm rated at 97 decibels gives a clear Price warning to all who are behind Sale Good Thru 8/31/2016 the vehicle. Can be mounted on any flat surface. Installs with $18.95 back up light or with separate switch. 4”W x 1-9/16”D x 2-1/2”H 87-005........................ Reg. $25.99 Replace one of your 4” round back up lights with this 97 decibel alarm. When you switch to reverse the alarm sounds. (DOT law only requires 1 back up light) 87-026..... Alarm............ $38.49 94993..... Pigtail............. $1.95 40700..... Grommet........ $1.44 Chemical, corrosion, and impact resistant conspicuity tape. Self adhesive and FMVSS 108 and ASTM D4956 DOT certified. 14-081......12", 6" Red/6" White, 5 pcs................ $4.20 14-083......18", Yellow, 5 pcs.............................. $6.49 14-084......18", 11" Red/7" White, 5 pcs.............. $6.49 14-082......150ft x 2" roll, 11" Red/7" White......$119.40 14-087......150ft x 2" roll, 6" Red/6" White........$119.40 Fluorescent orange marker kit. Can be used on front bumpers, trailers and other towed equipment. 3/4” Dia. Includes 1 pair 153-0031.....36" kit.....$28.85 153-0048.....48" kit.....$32.40 Kaiser Stemco King Pins • Installs in half the time with half the error! • 'No-Ream' spiral steel bushing installs by hand • High chrome, high carbon kin pin withstands constant turning and pounding • 'V' grooved king pins and spiral bushings allow grease to keep bearing lubricated • Holds up to 300% more grease allowing it to last 3-4 times longer • Grease penetrates wear areas without jacking up the front end Call or Email us with your VIN# and we can get your Kit Quick! We can Help with all of your Parts Needs! Stepvans Contact Us Phone: 800-888-5072 Email: info@millsupply.com MillSupply.com Online: Fax:888-781-2700 Mill Supply, Inc. 19801 Miles Rd. Cleveland, OH 44128 Snow Plows Truck Sheetmetal BUMPERS BRAKE HARDWARE CARGO CONTROL DOOR HARDWARE EXHAUST FUEL TANKS LIGHTS LIFTGATE PARTS MIRRORS POLY FENDERS PULL-OUT RAMPS RADIATORS ROLL-UP DOOR WHEEL SIMULATORS
Similar documents
aftermarket replacement parts catalog 2015
COST EFFECTIVE SOLUTION PRODUCT OFFERING Replacements for proprietary parts that fit
More informationBuilding Permit List
Pole shed Pole shed (storage) Pole barn (personal storage) Pole building - camper/boat storage House w/garage
More information