Flooring with personality.

Transcription

Flooring with personality.
Flooring with personality.
GB
Parquet flooring | Veneer flooring 2012
2
Why MEISTER is a real MASTER of wood - Philosophy
“Why MEISTER is
like a tree.”
Johannes Schulte, Managing Director at MeisterWerke
In 1930 my father began a carpentry shop in Meiste, Germany. His
inventiveness and high expectations of the quality of craftsmanship
in his products were the seed from which our present-day company
developed. A few growth rings later we now offer comprehensive
product systems for floors, walls and ceilings. We are firmly rooted in
our market. And we continue to be guided by my father's principles,
such as respect for our natural resources - for example at MEISTER we
never use tropical woods. And we take care to preserve resources in
the processing of the materials.
Added to this is the responsibility we feel for the place where we work.
MEISTER's production is one hundred percent German. For decades
we have been the dependable workplace for many families in our
region. And we are investing in the future with apprenticeships and
professional development, new production techniques and continuous
improvement in our product range. These are yet more reasons why we
have grown so consistently and so continuously.
Our decades of experience and this special sense of responsibility
result in products which combine the highest quality, best comfort
levels and a good conscience. We all trust in this here at MEISTER.
And you can trust in it when you use a MEISTER product in your home.
When, in the future, I hand over responsibility for the company to my
son and my long-standing colleagues I know that they will continue
to develop the company and I can be sure that they will continue to
breathe new life into my father's principles.
3
Interview
Overview
Page 2
Why MEISTER is a real MASTER of wood - Philosophy
Johannes Schulte
Managing Director at
MeisterWerke
Parquet plank flooring
Cover: Parquet plank flooring | PD 400 Cottage | Used-look oak lively 8098 | brushed | naturally oiled
Page 12
PD 550
| 1-strip (plank)
| 5 surfaces, naturally oiled,
brushed, with irregular
longitudinal V-bevel
| 5 UV-hardened oil surfaces,
brushed, with longitudinal V-bevel
Page 16
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of:
2400 × 200mm
2400 × 255mm
PD 400 Cottage | naturally oiled
| 1-strip (plank)
| 13 surfaces, naturally oiled,
brushed
| Longitudinal V-bevel
Page 26
| Approx. 2.5mm fine wood wear
layer
| Thickness: 15mm
| Lengths: 3650 | 4200mm
| Widths: 220 | 260mm
PD 450
| 1-strip (plank)
| 6 UV-hardened oil surfaces,
brushed
| All-round V-bevel
Page 20
| Click system: longitudinal Uniclic,
tongue-and-groove connection
on the end
| MEISTER warranty*
25 years in living areas
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2200 × 180mm
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2200 × 180mm
PD 400 Cottage | UV-oiled
| 1-strip (plank)
| 20 UV-hardened oil surfaces,
some brushed
| Longitudinal V-bevel
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
4
Parquet plank flooring
Page 32
PD 400 Cottage | varnished
| 1-strip (plank)
| 5 surfaces, varnished
| All-round V-bevel
Page 34
Parquet strip flooring
| Thickness: 13mm
| Elements with an effective
measurement of:
2200 × 180mm
| Click system: Uniclic
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 11mm
| Elements with an effective
measurement of: 500 × 100mm,
right and left strips in a box
| Click system: Masterclic
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 11mm
| Width: 100mm
| 3 lengths in one box:
500 | 685 | 1200mm
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 1187 × 142mm
| Design rectangles in elements
with an effective measurement
of: 90 × 142mm
PS 350
| 1-strip (strip parquet)
| 7 UV-hardened oil surfaces,
some brushed
| All-round V-bevel
Page 46
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
PS 400
| 1-strip (strip parquet for
herringbone pattern)
| 7 surfaces, varnished,
some brushed
| All-round V-bevel
Page 42
| Thickness: 13mm
| Elements with an effective
measurement of: 2200 × 180mm
PD 200
| 1-strip (plank)
| 3 surfaces, naturally oiled,
brushed
| 3 UV-hardened oil surfaces,
brushed
| Longitudinal V-bevel
Page 38
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
PS 300
| 1-strip (strip parquet)
| 13 surfaces, naturally oiled,
brushed
| 10 UV-hardened oil surfaces,
some brushed
| All-round V-bevel
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
5
Interview
Page 58
Parquet flooring Classic
Overview
Page 60
Why MEISTER is a real MASTER of wood – Innovation
Guido Schulte
Managing Director at
MeisterWerke
PC 400 Style
| End grain wood
| Fineline
| Broad Fineline
| 12 surfaces, varnished
Page 66
| Click system: Masterclic Plus
| MEISTER warranty*
30 years in living areas
| Approx. 3.6mm fine wood wear
layer
| Thickness: 14mm
| Elements with an effective
measurement of: 2400 × 200mm
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2400 × 200mm
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2400 × 200mm
PC 300
| 3-strip
| 12 UV-hardened oil surfaces,
some brushed
Page 78
| Thickness: 13mm (End grain
wood: 15mm)
| Elements with an effective
measurement of: 2400 × 200mm
(Broad Fineline: 2200 × 180mm)
PC 350
| 3-strip
| 12 UV-hardened oil surfaces,
some brushed
| 14 surfaces, varnished
Page 74
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
PC 200
| 3-strip
| 6 surfaces, naturally oiled
| 12 surfaces, varnished
| Click system: Masterclic Plus
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
6
Veneer flooring
Page 88
Interview
Page 94
FS 200 S
| 1-strip with all-round V-bevel
| 2-strip
| 15 surfaces, varnished
| With sound-absorbing cushion
1.3mm cork
| Thickness: 8.8mm
| Elements with an effective
measurement of: 1287 × 142mm
| Click system: Uniclic
| MEISTER warranty*
5 years in living areas
| Approx. 0.6mm fine wood
wear layer
Why MEISTER is a real MASTER of wood - Partnership
Ludger Schindler
Managing Director at
MeisterWerke
Page 96
Quality guarantees
Page 112
Mouldings
Page 98
Product structure
Page 114
Mouldings and clips
Page 100
HDF middle layer
Page 115
Corners and end caps
Page 101
Surface gradings
Page 116
Radiator rosettes and door stoppers
Page 102
Surface looks
Page 117
Aluminium profiles
Page 104
Surface finishes
Page 121
Underlay material
Page 108
Click systems
Page 123
Lighting
Page 125
Installation accessories and tools
Page 126
Care product range
Accessories
Technical details
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
7
Create a natural
atmosphere.
Parquet flooring: PD 550 | Oak lively 8091 | brushed | naturally oiled Skirting board: 13 PK profile | Plain white decorative film
Aluminium profile: Universal end profile type 287 B | Stainless steel surface
8
9
Parquet flooring: PD 450 | Antique grey oak harmonious 8175 | brushed | UV-oiled
10
Skirting board: 12 PK profile | Plain white decorative film
Parquet flooring
Living in style with real wood.
You will love the natural surfaces of parquet flooring which allow the nature of the wood to shine
through. MEISTER uses a complex series of processes to finish the woods and give each floor its
unique character. Classics like maple or beech, special woods such as Douglas fir or elm and the
wide variety of oaks produce inspiring and expressive surfaces. The parquet range is completed by
striking looks such as saw-cut, woodworm look or used look, providing the natural background on
which you can build your personal style in your home.
PD 550
PD 450
PD 400 Cottage | naturally oiled
PD 400 Cottage | UV-oiled
PD 400 Cottage | varnished
PD 200
PS 400
PS 350
PS 300
PC 400 Style
PC 350
PC 300
PC 200
11
Parquet plank flooring | PD 550
Planks with the right format.
Long planks have always created a generous and refined impression in a room.
Our PD 550 parquet flooring underlines this strongly; with a length of over four
metres and selected oak surfaces this floor looks truly expansive. A great deal
of work goes into producing the planks and their authentic oiled surfaces. Their
special bevelled edges produce a visually appealing and extremely natural
character.
12
Parquet flooring: PD 550 | Oak lively 8091 | brushed | naturally oiled Skirting board: 13 PK profile | Plain white decorative film
Aluminium profile: Universal end profile type 287 B | Stainless steel surface
13
Parquet plank flooring | PD 550 | naturally oiled
Naturally oiled - Weartec Nature
The new, naturally oiled surfaces on our parquet flooring are based
on natural oils and waxes. Weartec Nature penetrates deep into the
wood and forms a protective, breathable surface. This form of finishing
creates a natural appearance with subtle sheen, emphasises the grain
and structure, has a moisture-regulating effect and ensures a healthy
atmosphere in the room. All parquet floors with Weartec Nature
surfaces are treated ready for use in living areas and there is no need
to apply oil after installation. Naturally oiled surfaces do require regular
care, however, to lend the floor a natural patina and ensure extraordinary
durability. If required, oil can be reapplied or touched up without
sanding the floor.
White oak lively 8135 | brushed | FSC®-certified
Parquet flooring: PD 550 | Oak lively 8091 | brushed | naturally oiled
Lyed-look oak lively 8089 | brushed | FSC®-certified
Limed light oak lively 8132 | brushed | FSC®-certified
Oak lively 8091 | brushed | FSC®-certified
Smoked oak lively 8131 | brushed | FSC®-certified
14
Parquet plank flooring | PD 550 | UV-oiled
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
White oak lively 8133 | brushed | FSC®-certified
Lyed-look oak lively 8029 | brushed | FSC®-certified
Limed light oak lively 8134 | brushed | FSC®-certified
Oak lively 8028 | brushed | FSC®-certified
Smoked oak lively 8031 | brushed | FSC®-certified
At a glance | PD 550
| 1-strip (plank)
| 5 surfaces, naturally oiled,
brushed, with irregular
longitudinal V-bevel
| 5 surfaces, UV-oiled, brushed, with
longitudinal V-bevel
| Click system: longitudinal Uniclic,
tongue-and-groove connection on
the end
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 15mm
| Lengths: 3650 | 4200mm
| Widths: 220 | 260mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
15
Parquet plank flooring | PD 450
The elegance of oak.
Harmonious oak surfaces radiate warmth and cosiness and at the same time look
elegant. The PD 450 collection's UV-oiled planks are a perfect example of this: they
impress with their natural colours and smooth look. The high quality real wood planks
are available in two widths for customised installation design. The ideal parquet for
style conscious interior design.
Parquet flooring | PD 450
Real wood quality made in Germany.
http://www.meister.com/fs/en/parquet-floor/
plank/pd-450-uv-oiled.html
16
Parquet flooring: PD 450 | Lyed-look oak harmonious 8172 | brushed | UV-oiled
Skirting board: 2 PK profile | Lyed-look oak 1045 | oiled
17
Parquet plank flooring | PD 450
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
Parquet flooring: PD 450 | Lyed-look oak harmonious 8172 | brushed | UV-oiled
White oak harmonious 8174 | brushed | FSC®-certified
Antique grey oak harmonious 8175 | brushed | FSC®-certified
Lyed-look oak harmonious 8172 | brushed | FSC®-certified
Limed light oak harmonious 8173 | brushed | FSC®-certified
18
Parquet flooring: PD 450 | Antique grey oak harmonious 8175 | brushed | UV-oiled Skirting board: 12 PK profile | Plain white decorative film
Light oak harmonious 8176 | brushed | FSC®-certified
Oak harmonious 8171 | brushed | FSC®-certified
At a glance | PD 450
| 1-strip (plank)
| 6 UV-hardened oil surfaces,
brushed
| All-round V-bevel
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of:
2400 × 200mm | 2400 × 255mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
19
Parquet plank flooring | PD 400 Cottage
Pure comfort.
As varied as nature - that's how diverse this collection is. A variety of
surface finishes, a selection of edge finishes and an almost inexhaustible
range of colours in this collection combine to produce countless floor design
possibilities. The broad selection of bold and expressive wood varieties
from Canadian maple and oak to smoked Douglas fir leave absolutely
nothing to be desired.
20
Parquet flooring: PD 400 Cottage | Used-look oak lively 8098 | brushed | naturally oiled
Skirting board: 9 PK profile | Plain white decorative film
21
Parquet plank flooring | PD 400 Cottage | naturally oiled
Parquet flooring: PD 400 Cottage | Limed smoked oak lively 8096 | brushed | naturally oiled
Skirting board: 2 PK profile | Limed black-brown oak Nature 1092 | oiled
22
Naturally oiled - Weartec Nature
The new, naturally oiled surfaces on our parquet flooring are based
on natural oils and waxes. Weartec Nature penetrates deep into the
wood and forms a protective, breathable surface. This form of finishing
creates a natural appearance with subtle sheen, emphasises the grain
and structure, has a moisture-regulating effect and ensures a healthy
atmosphere in the room. All parquet floors with Weartec Nature
surfaces are treated ready for use in living areas and there is no need
to apply oil after installation. Naturally oiled surfaces do require regular
care, however, to lend the floor a natural patina and ensure extraordinary
durability. If required, oil can be reapplied or touched up without
sanding the floor.
Parquet flooring: PD 400 Cottage | Limed smoked oak lively 8096 | brushed
naturally oiled
Skirting board: 2 PK profile | Limed black-brown oak Nature 1092 | oiled
White oak harmonious 8090 | brushed | FSC®-certified
White oak harmonious, saw-cut structure 8129 | brushed | FSC®-certified
Lyed-look oak lively 8089 | brushed | FSC®-certified
Lyed-look oak harmonious, saw-cut structure 8130 | brushed | FSC®-certified
23
Parquet plank flooring | PD 400 Cottage | naturally oiled
Limed light oak harmonious 8093 | brushed | FSC®-certified
Limed old grey oak harmonious 8102 | brushed | FSC®-certified
Woodworm look oak lively 8097 | brushed | FSC®-certified
Oak lively 8091 | brushed | FSC®-certified
Parquet flooring: PD 400 Cottage | Lyed-look oak harmonious, saw-cut structure 8130 | brushed | naturally oiled
Skirting board: 8 PK profile | Stainless steel decorative film
24
Used-look oak lively 8098 | brushed | FSC®-certified
Limed antique brown oak lively 8094 | brushed | FSC®-certified
Used-look antique brown oak lively 8099 | brushed | FSC®-certified
Limed smoked oak lively 8096 | brushed | FSC®-certified
s make
d profile
esive en
. You
Self-adh
st
a
the p
thing of
ory
drilling a
ss
e
c
c
a
the entire
0.
will find
page 11
n
o
g
in
me start
program
Mocha oak lively 8095 | brushed | FSC®-certified
At a glance | PD 400 Cottage | naturally oiled
| 1-strip (plank)
| 13 surfaces, naturally oiled,
brushed
| Longitudinal V-bevel
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2200 × 180mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
25
Parquet plank flooring | PD 400 Cottage | UV-oiled
Parquet flooring: PD 400 Cottage | Limed cappuccino oak lively 8085 | brushed | UV-oiled
Skirting board: 8 PK profile | primer film (varnished in wall colour)
26
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
Opaque white oak harmonious 8081 | brushed | FSC®-certified
White ash lively 8054 | brushed | FSC®-certified
Canadian maple lively 8024 | FSC®-certified
Steamed beech lively 8033 | FSC®-certified
Larch lively 8038 | brushed | FSC®-certified
27
Parquet plank flooring | PD 400 Cottage | UV-oiled
Parquet flooring: PD 400 Cottage | Opaque white oak harmonious 8081 | brushed | UV-oiled
Skirting board: 11 PK profile | Plain white decorative film
American elm lively 8080 | FSC®-certified
Oak harmonious 8027 | brushed | FSC®-certified
Oak lively 8028 | brushed | FSC®-certified
Lyed-look oak lively 8029 | brushed | FSC®-certified
28
Parquet flooring: PD 400 Cottage | Limed smoked oak lively 8088 | brushed
UV-oiled
Caramel oak lively 8026 | FSC®-certified
Limed old grey oak lively 8083 | brushed | FSC®-certified
Limed light oak harmonious 8082 | brushed | FSC®-certified
Limed oak lively 8084 | brushed | FSC®-certified
29
Parquet plank flooring | PD 400 Cottage | UV-oiled
Limed cappuccino oak lively 8085 | brushed | FSC®-certified
Limed antique brown oak lively 8086 | brushed | FSC®-certified
Limed smoked oak lively 8088 | brushed | FSC®-certified
Limed mocha oak lively 8087 | brushed | FSC®-certified
Parquet flooring: PD 400 Cottage | Limed smoked oak lively 8088 | brushed | UV-oiled Skirting board: 8 PK profile | Plain white decorative film
30
Smoked Douglas fir distinctive 8036 | brushed | FSC®-certified
Smoked oak lively 8031 | brushed | FSC®-certified
Smoked oak distinctive 8032 | brushed | FSC®-certified
e
ts provid
ssed ligh
LED rece
accents.
unusual
entire
find the
rting
You will
mme sta
ry progra
accesso
110.
on page
At a glance | PD 400 Cottage | UV-oiled
| 1-strip (plank)
| 20 UV-hardened oil surfaces,
some brushed
| Longitudinal V-bevel
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2200 × 180mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
31
Parquet plank flooring | PD 400 Cottage | varnished
Parquet flooring: PD 400 Cottage | Steamed beech harmonious 8041 | varnished
Natural matt varnish seal
The natural matt varnish seal Duratec Plus on our parquet flooring
is particularly durable, easy to maintain and naturally kind to the
environment as it is solvent-free. The Plus stands for a variation on
our seven-layer Duratec varnish composition. The mixture of varnishes
in the individual layers and the order in which they are applied take
account of the fact that parquet floors may be sanded. Each element
in the composition consists of formaldehyde-free, UV-hardened and
ecologically sound acrylic varnish. All of this means that Duratec Plus
provides an easy-care and long-life surface for parquet floors.
Canadian maple harmonious 8039 | FSC®-certified
32
Steamed beech harmonious 8041 | FSC®-certified
Oak harmonious 8042 | FSC®-certified
American cherry tree lively 8043 | FSC®-certified
American walnut lively 8044
ce the
ays redu
g underl
n
ti
la
su
In
d footfall
room an
tire
effective
d the en
n
u will fi
rting
a
noise. Yo
st
mme
ry progra
accesso
110.
on page
At a glance | PD 400 Cottage | varnished
| 1-strip (plank)
| 5 surfaces, varnished
| All-round V-bevel
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2200 × 180mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
33
Parquet plank flooring | PD 200
A living piece of nature.
The natural play on colours and structures lends the wood its unmistakable
character. The MEISTER parquet flooring collection PD 200 is just as fascinating. The rustic assortment of planks with their distinctive knots in the real
wood wear layer lend the floor its unspoiled and living look.
34
Parquet flooring: PD 200 | Rustic oak 8166 | brushed | naturally oiled Skirting board: 2 PK profile | Oak Nature 1084 | oiled
35
Parquet plank flooring | PD 200 | naturally oiled
Naturally oiled - Weartec Nature
The new, naturally oiled surfaces on our parquet flooring are based
on natural oils and waxes. Weartec Nature penetrates deep into the
wood and forms a protective, breathable surface. This form of finishing
creates a natural appearance with subtle sheen, emphasises the grain
and structure, has a moisture-regulating effect and ensures a healthy
atmosphere in the room. All parquet floors with Weartec Nature
surfaces are treated ready for use in living areas and there is no need
to apply oil after installation. Naturally oiled surfaces do require regular
care, however, to lend the floor a natural patina and ensure extraordinary
durability. If required, oil can be reapplied or touched up without
sanding the floor.
White rustic oak 8167 | brushed
Lyed-look oak rustic 8168 | brushed
Rustic oak 8166 | brushed
Parquet flooring: PD 200 | Rustic oak 8166 | brushed | naturally oiled Skirting board: 2 PK profile | Oak Nature 1084 | oiled
36
Parquet plank flooring | PD 200 | UV-oiled
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
White rustic oak 8139 | brushed
Lyed-look oak rustic 8138 | brushed
Rustic oak 8137 | brushed
At a glance | PD 200
| 1-strip (plank)
| 3 surfaces, naturally oiled,
brushed
| 3 UV-hardened oil surfaces,
brushed
| Longitudinal V-bevel
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of:
2200 × 180mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
37
Parquet strip flooring | PS 400
Herringbone for perfect form.
Herringbone style is part of Europe's grand parquet flooring tradition. The PS 400
collection is our modern variation on this classic. An all-round V-bevel emphasises
this classic installation layout and the selection of elegant woods such as oak,
cherry tree or walnut gives this floor its contemporary note.
38
Parquet flooring: PS 400 | American walnut lively 8044 | varnished Skirting board: 1 MK profile | American walnut 015 | varnished
Aluminium profile: Universal transition profile type 288 B | Anodised silver
39
Parquet strip flooring | PS 400
Natural matt varnish seal
The natural matt varnish seal Duratec Plus on our parquet flooring
is particularly durable, easy to maintain and naturally kind to the
environment as it is solvent-free. The Plus stands for a variation on
our seven-layer Duratec varnish composition. The mixture of varnishes
in the individual layers and the order in which they are applied take
account of the fact that parquet floors may be sanded. Each element
in the composition consists of formaldehyde-free, UV-hardened and
ecologically sound acrylic varnish. All of this means that Duratec Plus
provides an easy-care and long-life surface for parquet floors.
Oak harmonious 8042 | FSC®-certified
Oak lively 8047 | FSC®-certified
Parquet flooring: PS 400 | American cherry tree lively 8043 | varnished
40
American cherry tree harmonious 8048 | FSC®-certified
American cherry tree lively 8043 | FSC®-certified
American walnut harmonious 8049
American walnut lively 8044
Smoked oak lively 8031 | brushed | FSC®-certified
re
boards a
skirting
Hamburg
uildings.
b
ld
o
in
popular
not only
entire
find the
ill
rting
You w
mme sta
ra
g
ro
p
ry
o
ss
e
c
ac
110.
on page
At a glance | PS 400
| 1-strip (strip parquet for
herringbone pattern)
| 7 surfaces, varnished,
some brushed
| All-round V-bevel
| Click system: Uniclic
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 11mm
| Elements with an effective
measurement of: 500 × 100mm,
right and left strips in a box
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
41
Parquet strip flooring | PS 350
It's all in the mix.
The classic 1-strip floors are characterised by atmosphere and a natural
feel. Lively surfaces in combination with an all-round V-bevel give PS 350 an
attractive and animated vibrancy. This effect is given additional emphasis by
the three different plank lengths in each box.
42
Parquet flooring: PS 350 | American cherry tree lively 8043 | UV-oiled Skirting board: 2 PK profile | American cherry tree 1053 | oiled
Aluminium profile: Universal transition profile type 288 B | Anodised silver
43
Parquet strip flooring | PS 350
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
White oak lively 8076 | FSC®-certified
Canadian maple lively 8024 | FSC®-certified
Steamed beech lively 8033 | FSC®-certified
Oak lively 8028 | brushed | FSC®-certified
American cherry tree lively 8043 | FSC®-certified
American walnut lively 8044
Smoked oak, light, lively 8046 | brushed | FSC®-certified
44
Parquet flooring: PS 350 | American cherry tree lively 8043 | UV-oiled
Skirting board: 2 PK profile | American cherry tree 1053 | oiled
Aluminium profile: Universal transition profile type 288 B | Anodised silver
s create
m profile
Aluminiu
You will
s.
ansition
perfect tr
cessory
entire ac
e 110.
find the
g on pag
e startin
m
m
ra
g
pro
At a glance | PS 350
| 1-strip (strip parquet)
| 7 UV-hardened oil surfaces,
some brushed
| All-round V-bevel
| Click system: Masterclic
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 11mm
| Width: 100mm
| 3 lengths in one box:
500 | 685 | 1200mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
45
Parquet strip flooring | PS 300
Parquet shows its best side.
Large format strip planks are right on trend. Our floors have oiled surfaces
and a precisely finished all-round V-bevel to emphasise the particular
shape of the strips still further. Together with selected real woods in our
harmonious or lively gradings and new finishes such as saw-cut structure
you can bring a huge range of interior design styles to life.
46
Parquet flooring: PS 300 | White ash lively 8054 | brushed | UV-oiled
Skirting board: 5 PK profile | White ash 1052 | oiled
Aluminium profile: Universal transition profile type 288 B | Anodised silver
47
Parquet strip flooring | PS 300 | naturally oiled
Parquet flooring: PS 300 | Woodworm look oak lively 8097 | brushed | naturally oiled Skirting board: 3 PK profile | Natural oak 1084 | oiled
Aluminium profile: Universal end profile type 287 B | Stainless steel surface
48
Naturally oiled - Weartec Nature
The new, naturally oiled surfaces on our parquet flooring are based
on natural oils and waxes. Weartec Nature penetrates deep into the
wood and forms a protective, breathable surface. This form of finishing
creates a natural appearance with subtle sheen, emphasises the grain
and structure, has a moisture-regulating effect and ensures a healthy
atmosphere in the room. All parquet floors with Weartec Nature
surfaces are treated ready for use in living areas and there is no need
to apply oil after installation. Naturally oiled surfaces do require regular
care, however, to lend the floor a natural patina and ensure extraordinary
durability. If required, oil can be reapplied or touched up without
sanding the floor.
White oak harmonious 8090 | brushed | FSC®-certified
White oak lively, saw-cut structure 8100 | brushed | FSC®-certified
Lyed-look oak lively 8089 | brushed | FSC®-certified
Lyed-look oak lively, saw-cut structure 8101 | brushed | FSC®-certified
Limed old grey oak harmonious 8102 | brushed | FSC®-certified
Oak lively 8091 | brushed | FSC®-certified
49
Parquet strip flooring | PS 300 | naturally oiled
Woodworm look oak lively 8097 | brushed | FSC®-certified
Used-look oak lively 8098 | brushed | FSC®-certified
Parquet flooring: PS 300 | Limed old grey oak harmonious 8102 | brushed | naturally oiled Aluminium profile: Universal transition profile type 288 B | Anodised silver
50
Limed light oak harmonious 8093 | brushed | FSC®-certified
Limed antique brown oak lively 8094 | brushed | FSC®-certified
Used-look antique brown oak lively 8099 | brushed | FSC®-certified
Limed smoked oak harmonious 8116 | brushed | FSC®-certified
Mocha oak harmonious 8103 | brushed | FSC®-certified
51
Parquet strip flooring | PS 300 | UV-oiled
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
White ash lively 8054 | brushed | FSC®-certified
Limed oak harmonious 8053 | brushed | FSC®-certified
Lyed-look oak lively 8029 | brushed | FSC®-certified
Light antique oak lively 8051 | FSC®-certified
Oak harmonious 8027 | brushed | FSC®-certified
Oak lively 8028 | brushed | FSC®-certified
American cherry tree lively 8043 | FSC®-certified
52
Light smoked oak lively 8046 | brushed | FSC®-certified
Parquet flooring: PS 300 | White ash lively 8054 | brushed | UV-oiled
American walnut lively 8044
Skirting board: 5 PK profile | White ash 1052 | oiled
Aluminium profile: Universal transition profile type 288bBb| Anodised silver
nally
professio
s can be
ir
a
st
n
n
e tire
Eve
find the
. You will
rting
a
covered
mme st
ry progra
accesso
110.
on page
Smoked oak harmonious 8052 | brushed | FSC®-certified
At a glance | PS 300
| 1-strip (strip parquet)
| 13 surfaces, naturally oiled,
brushed
| 10 UV-hardened oil surfaces,
some brushed
| All-round V-bevel
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 1187 × 142mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
53
Parquet flooring | PS 300 | Design rectangle
Small size - huge effect.
Design elements provide unusual accents. Our design rectangles lend an
individual note to PS 300 parquet flooring. There are five different real wood
surfaces to choose from. They can be laid between the ends of the planks
in whatever pattern you choose to create individual flooring looks.
54
Parquet flooring: PS 300 | Lyed-look oak lively 8029 | brushed | UV-oiled
Design rectangle: Light antique oak lively 8051 | UV-oiled
Skirting board: 4 MK profile | Lyed-look oak 1045 | oiled
55
Parquet flooring | PS 300 | Design rectangle
Parquet flooring: PS 300 | Oak harmonious 8027 | brushed | FSC®-certified
Parquet flooring: PS 300 | Oak harmonious 8027 | brushed | FSC®-certified
Design rectangle: Lyed-look oak lively 8029 | brushed | FSC®-certified
Design rectangle: Oak harmonious 8027 | brushed | FSC®-certified
Parquet flooring: PS 300 | Oak harmonious 8027 | brushed | FSC®-certified
Parquet flooring: PS 300 | Oak harmonious 8027 | brushed | FSC®-certified
Design rectangle: Light antique oak lively 8051 | FSC®-certified
Design rectangle: Limed smoked oak lively 8088 | brushed | FSC®-certified
Parquet flooring: PS 300 | Oak harmonious 8027 | brushed | FSC®-certified
Design rectangle: Smoked oak harmonious 8052 | brushed | FSC®-certified
56
Parquet flooring: PS 300 | Lyed-look oak lively 8029 | brushed | UV-oiled
Design rectangle: Light antique oak lively 8051 | UV-oiled
Skirting board: 4 MK profile | Lyed-look oak 1045 | oiled
At a glance | PS 300 | Design rectangle
| 5 UV-hardened oil surfaces,
some brushed
| All-round V-bevel
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 90 × 142mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
57
58
Why MEISTER is a real MASTER of wood – Innovation
“Why MEISTER sometimes
thinks outside the box.”
Guido Schulte, Managing Director at MeisterWerke
MEISTER's list of innovations is long. Over 200 registered patents and
registered designs demonstrate how good we are at coming up with
new ideas. We invented the integrated sound-absorbing cushion and
thus quiet flooring. The HDF middle layer gives our floors more stability
and helps to preserve valuable stocks of real wood. The Masterclic
Plus installation technology with patented end locking system makes it
possible to carry out simple floating installations of our floors without
full surface bonding. All of this has set the standard for the whole
sector.
But this is not enough for us. Our inventive spirit never sleeps. This,
too, is a part of our company's long tradition. Innovation means doing
old things in new ways. This is what I demand when developing new
products, new systems and new designs. If we want to stay as we are,
we have to constantly change.
Sometimes a very simple idea is all it takes: for example, we wanted
to provide an extra-long laminate plank with no repetition in the
decor. This is the only way that they can look absolutely genuine and
nevertheless be affordable for a large number of customers. With
the ordinary print layouts, however, this could not be done. Others
may have been satisfied with this. We simply changed from printing
lengthways to crossways.
Why are we always thinking of something new? Because we have
a particularly creative and well-trained team. Because we are never
satisfied with the first solution that comes to mind. Because we think
outside the box in order to develop new ideas. Because we trust in our
own abilities and because we love our products.
59
Parquet flooring Classic | PC 400 Style
Bold design is the trend.
Distinctive woods and vibrant flooring layouts really catch the eye. The
floors in this collection, with their unique and very lively look, are perfectly
suited for individual floor design. Fineline is made up of many narrow strips
laid side by side and once laid the floor is unmistakable. The end grain planks
with their characteristic wood grain provide striking accents and are also
enormously durable due to the particular way in which they are produced.
60
Parquet flooring: PC 400 Style | White ash lively 8122 | broad Fineline | varnished Skirting board: 12 PK profile | Plain white decorative film
61
Parquet flooring Classic | PC 400 Style | varnished
Natural matt varnish seal
The natural matt varnish seal Duratec Plus on our parquet flooring
is particularly durable, easy to maintain and naturally kind to the
environment as it is solvent-free. The Plus stands for a variation on
our seven-layer Duratec varnish composition. The mixture of varnishes
in the individual layers and the order in which they are applied take
account of the fact that parquet floors may be sanded. Each element
in the composition consists of formaldehyde-free, UV-hardened and
ecologically sound acrylic varnish. All of this means that Duratec Plus
provides an easy-care and long-life surface for parquet floors.
Parquet flooring: PC 400 Style | White ash lively 8122 | broad Fineline | varnished
White ash lively 8122 | broad Fineline | FSC®-certified
Oak lively 8121 | broad Fineline | FSC®-certified
White larch lively 8118 | end grain wood | FSC®-certified
Light oak lively 8120 | end grain wood | FSC®-certified
62
Parquet flooring: PC 400 Style | White ash lively 8122 | broad Fineline | varnished Skirting board: 12 PK profile | Plain white decorative film
63
Parquet flooring Classic | PC 400 Style | varnished
Oak lively 8119 | end grain wood | FSC®-certified
European walnut lively 8117 | end grain wood | FSC®-certified
White ash lively 8123 | Fineline | FSC®-certified
Oak lively 8124 | Fineline | FSC®-certified
Parquet flooring: PC 400 Style | Light oak lively 8120 | end grain wood | varnished Aluminium profile: Universal end profile type 287 B | Anodised silver
System panels: SP 400 | Fineline white 4107 | decor, with accessories Moulding: Angled cover moulding | Fineline white 4107 | decor
64
European walnut lively 8125 | Fineline | FSC®-certified
Smoked oak lively, aluminium stripe 8126 | Fineline | FSC®-certified
Smoked oak lively 8127 | Fineline | FSC®-certified
Smoked oak lively, mix 8128 | Fineline | FSC®-certified
e
ts provid
ssed ligh
LED rece
ill
w
u
o
Y
.
accents
unusual
cessory
entire ac
e
th
e 110.
find
g on pag
e startin
m
m
ra
g
pro
At a glance | PC 400 Style
| End grain wood
| Fineline
| Broad Fineline
| 12 surfaces, varnished
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
(End grain wood: 15mm)
| Elements with an effective
measurement of: 2400 × 200mm
(Broad Fineline: 2200 × 180mm)
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
65
Parquet flooring Classic | PC 350
A floor for life.
When they think of parquet flooring many people think of 3-strip floors. With its
large selection of high-quality real woods and effective surface finishes PC 350
has the right thing for every taste. The fine wood wear layer makes every floor
particularly hard-wearing. Take pleasure in your floor - for many years to come.
66
Parquet flooring: PC 350 | Canadian maple lively 8002 | UV-oiled Skirting board: 8 PK profile | Plain white decorative film
Aluminium profile: Universal end profile type 287 B | Anodised silver
67
Parquet flooring Classic | PC 350 | UV-oiled
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
White beech lively 8017 | FSC®-certified
Caramel oak lively 8022 | FSC®-certified
Canadian maple harmonious 8001 | FSC®-certified
Canadian maple lively 8002 | FSC®-certified
Beech harmonious 8005 | FSC®-certified
Steamed beech lively 8016 | FSC®-certified
68
Steamed beech harmonious 8007 | FSC®-certified
Oak harmonious 8018 | brushed | FSC®-certified
Oak lively 8019 | brushed | FSC®-certified
American cherry tree lively 8013 | FSC®-certified
American walnut lively 8023
Smoked oak harmonious 8021 | brushed | FSC®-certified
69
Parquet flooring Classic | PC 350 | varnished
Natural matt varnish seal
The natural matt varnish seal Duratec Plus on our parquet flooring
is particularly durable, easy to maintain and naturally kind to the
environment as it is solvent-free. The Plus stands for a variation on
our seven-layer Duratec varnish composition. The mixture of varnishes
in the individual layers and the order in which they are applied take
account of the fact that parquet floors may be sanded. Each element
in the composition consists of formaldehyde-free, UV-hardened and
ecologically sound acrylic varnish. All of this means that Duratec Plus
provides an easy-care and long-life surface for parquet floors.
Parquet flooring: PC 350 | American walnut harmonious 8014 | varnished Skirting board: 3 PK profile | American walnut 015 | varnished
Aluminium profile: Universal transition profile type 288 B | Anodised bronze, Universal end profile type 287 B | Anodised bronze
System panels: SP 400 | Aluminium 4049 | Decor
70
European maple harmonious 8003 | FSC®-certified
European maple white, lively 8004 | FSC®-certified
Canadian maple harmonious 8001 | FSC®-certified
71
Parquet flooring Classic | PC 350 | varnished
Canadian maple lively 8002 | FSC®-certified
Beech harmonious 8005 | FSC®-certified
Beech lively 8006 | FSC®-certified
Steamed beech harmonious 8007 | FSC®-certified
Limed oak harmonious 8008 | FSC®-certified
Oak harmonious 8009 | FSC®-certified
Oak lively 8011 | FSC®-certified
American cherry tree harmonious 8012 | FSC®-certified
72
American cherry tree lively 8013 | FSC®-certified
European walnut lively 8015 | FSC®-certified
Parquet flooring: PC 350 | American walnut harmonious 8014 | varnished
Skirting board: 3 PK profile | American walnut 015 | varnished
Aluminium profile: Universal transition profile type 288 B | Anodised bronze
American walnut harmonious 8014
ect
s for perf
g profile
Matchin
the
d
n
fi
ill
ns. You w
me
transitio
program
cessory
c
a
entire
110.
on page
starting
At a glance | PC 350
| 3-strip
| 12 UV-hardened oil surfaces,
some brushed
| 14 surfaces, varnished
| Click system: Masterclic Plus
| MEISTER warranty*
30 years in living areas
| Approx. 3.6mm fine wood wear
layer
| Thickness: 14mm
| Elements with an effective
measurement of: 2400 × 200mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
73
Parquet flooring | PC 300
Designed for comfort.
3-strip flooring is some of the most popular parquet flooring available. PC 300
proves that this type of plank can also be genuinely interesting. Beautiful
woods from ash and oak to elm and Douglas fir, diverse gradings and a wide
selection of colours create an attractive effect. The UV-hardened oil surface
gives each floor a satin-matt sheen and makes it hard-wearing and easy to
maintain.
74
Parquet flooring: PC 300 | Smoked Douglas fir distinctive 8108 | brushed | UV-oiled Skirting board: 3 PK profile | Red-brown Douglas fir 1036 | oiled
75
Parquet flooring Classic | PC 300
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
White ash lively 8104 | brushed | FSC®-certified
White beech lively 8109 | FSC®-certified
Lyed-look oak lively 8112 | brushed | FSC®-certified
Limed old grey oak lively 8113 | brushed | FSC®-certified
American cherry tree distinctive 8111 | FSC®-certified
Limed oak lively 8114 | brushed | FSC®-certified
76
Limed light oak harmonious 8106 | brushed | FSC®-certified
American elm lively 8115 | FSC®-certified
European walnut lively 8110 | FSC®-certified
Smoked Douglas fir distinctive 8108 | brushed | FSC®-certified
Limed smoked oak lively 8107 | brushed | FSC®-certified
Smoked oak lively 8105 | brushed | FSC®-certified
At a glance | PC 300
| 3-strip
| 12 UV-hardened oil surfaces,
some brushed
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of:
2400 × 200mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
77
Parquet flooring Classic | PC 200
Let good taste decide.
Parquet flooring should look beautiful and be durable at the same time. The PC 200
real wood flooring is the ideal introduction to the world of parquet. The collection
consisting of maple, beech, oak, cherry tree and walnut woods is available with matt
varnished and naturally oiled surfaces and fulfils all interior design dreams.
78
Parquet flooring: PC 200 | Steamed beech lively 921 | varnished Skirting board: 11 PK profile | Plain white decorative film
79
Parquet flooring Classic | PC 200 | naturally oiled
Naturally oiled - Weartec Nature
The new, naturally oiled surfaces on our parquet flooring are based
on natural oils and waxes. Weartec Nature penetrates deep into the
wood and forms a protective, breathable surface. This form of finishing
creates a natural appearance with subtle sheen, emphasises the grain
and structure, has a moisture-regulating effect and ensures a healthy
atmosphere in the room. All parquet floors with Weartec Nature
surfaces are treated ready for use in living areas and there is no need
to apply oil after installation. Naturally oiled surfaces do require regular
care, however, to lend the floor a natural patina and ensure extraordinary
durability. If required, oil can be reapplied or touched up without
sanding the floor.
Canadian maple lively 8177 | FSC®-certified
Beech lively 8178 | FSC®-certified
Steamed beech lively 8186 | FSC®-certified
American cherry tree lively 8188 | FSC®-certified
Oak lively 8187 | brushed | FSC®-certified
American walnut distinctive 8189
80
Parquet flooring Classic | PC 200 | varnished
Natural matt varnish seal
The natural matt varnish seal Duratec Plus on our parquet flooring
is particularly durable, easy to maintain and naturally kind to the
environment as it is solvent-free. The Plus stands for a variation on
our seven-layer Duratec varnish composition. The mixture of varnishes
in the individual layers and the order in which they are applied take
account of the fact that parquet floors may be sanded. Each element
in the composition consists of formaldehyde-free, UV-hardened and
ecologically sound acrylic varnish. All of this means that Duratec Plus
provides an easy-care and long-life surface for parquet floors.
Parquet flooring: PC 200 | Steamed beech lively 921 | varnished
Canadian maple harmonious 943 | FSC®-certified
Canadian maple lively 934 | FSC®-certified
Beech harmonious 913 | FSC®-certified
Beech lively 918 | FSC®-certified
81
Parquet flooring Classic | PC 200 | varnished
Steamed beech harmonious 928 | FSC®-certified
Steamed beech lively 921 | FSC®-certified
American cherry tree harmonious 945 | FSC®-certified
American cherry tree lively 952 | FSC®-certified
Oak harmonious 910 | FSC®-certified
Oak lively 903 | FSC®-certified
American walnut harmonious 960
American walnut distinctive 991
82
Parquet flooring: PC 200 | Steamed beech lively 921 | varnished
re
boards a
skirting
ings.
ild
Hamburg
u
b
ld
in o
popular
ly
n
o
t
o
n
entire
find the
rting
You will
mme sta
ra
ry prog
accesso
110.
on page
At a glance | PC 200
| 3-strip
| 6 surfaces, naturally oiled
| 12 surfaces, varnished
| Click system: Masterclic Plus
| MEISTER warranty*
25 years in living areas
| Approx. 2.5mm fine wood wear
layer
| Thickness: 13mm
| Elements with an effective
measurement of: 2400 × 200mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
83
Fascinating
play of colour.
Veneer flooring: FS 200 S | Heartwood walnut lively 5001 | 1-strip | varnished Skirting board: 8 PK profile | Stainless steel decorative film
84
85
Veneer flooring: FS 200 S | Plum lively 5004 | 2-strip
86
Veneer flooring
Durable.
Veneer flooring can really stand up to a thing or two. Our collection proves this
again and again in laboratory tests as well as in everyday use. A particularly stable
HDF middle layer in combination with a thin layer of genuine wood veneer makes
the planks extremely impact-resistant. This wear layer also helps us to keep down
material usage and means that we can include precious woods in the collection.
Its minimal depth also means that MEISTER veneer flooring is ideal for use in
renovations.
FS 200 S
87
Veneer flooring | FS 200 S
Set unusual accents.
Veneer flooring is a particularly responsible approach to the precious resource of
wood. This means that alongside classics such as oak, ash and walnut we have also
been able to include woods such as apple and plum in the veneer flooring collection
FS 200 S. Choose from 1 or 2-strip planks with boldly expressive surfaces, all treated
with an environmentally friendly varnish.
88
Veneer flooring: FS 200 S | Heartwood walnut lively 5001 | 1-strip | varnished Skirting board: 8 PK profile | Stainless steel decorative film
89
Veneer flooring | FS 200 S
Veneer flooring: FS 200 S | Lyed-look oak harmonious 521 | brushed | 1-strip | varnished
Natural matt varnish seal
The environmentally friendly varnish seal on our veneer flooring
is particularly durable and easy to maintain. Each element in the
varnish composition consists of formaldehyde-free, UV-hardened
and ecologically sound acrylic varnish. This varnish is particularly
tough since, unlike with parquet floors, we did not have to take
into account that these floors might ever be sanded.
90
Canadian maple lively 516 | 1-strip
Beech lively 515 | 1-strip
Lyed-look oak harmonious 521 | brushed | 1-strip
Oak harmonious 517 | brushed | 1-strip
Oak lively 519 | brushed | 1-strip
Heartwood walnut lively 5001 | 1-strip
91
Veneer flooring | FS 200 S
American cherry tree lively 523 | 1-strip
American cherry tree lively 5005 | 2-strip
Heartwood pear tree lively 5003 | 2-strip
Apple tree lively 5002 | 2-strip
Plum lively 5004 | 2-strip
French walnut lively 528 | 1-strip
92
French walnut lively 5007 | 2-strip
American walnut lively 5006 | 2-strip
Veneer flooring: FS 200 S | Plum lively 5004 | 2-strip | varnished
American walnut lively 518 | 1-strip
ng board
ing skirti
r
A match
neer floo
ve
a
ents
entire
complem
e
th
d
n
fi
You will
arting
perfectly.
ramme st
g
ro
p
ry
accesso
110.
on page
At a glance | FS 200 S
| 1-strip with all-round V-bevel
| 2-strip
| 15 surfaces, varnished
| With sound-absorbing cushion
1.3mm cork
| Click system: Uniclic
| MEISTER warranty*
5 years in living areas
| Approx. 0.6mm fine wood
wear layer
| Thickness: 8.8mm
| Elements with an effective
measurement of:
1287 × 142mm
* Warranty according to the MeisterWerke warranty conditions at www.meister.com
93
94
Why MEISTER is a real MASTER of wood - Partnership
“Why dealing with MEISTER
is like dealing with a friend.”
Ludger Schindler, Managing Director at MeisterWerke
I feel a great sense of responsibility towards the people who choose
our products because in so doing they are placing their trust in us
for years to come. And we take that very seriously. This is why we do
everything we can to make sure that they are happy with their selected
products from the very beginning. This starts with the consultation with
the specialist retailer: he has the expertise to be able to provide the
customer with comprehensive and individual information, can provide
the full range of services and offers the complete range. This is why
MEISTER is only available from specialist retailers.
The details are important to us, too. Because only the right accessories
will create a perfect, unified room experience. End mouldings to match
the floor, for example, round off the overall impression and the correct
care product will keep the floor looking beautiful for years to come. This
also applies, of course, to our wall and ceiling systems.
After purchasing comes laying and installation. Each year MEISTER
provides intensive training to thousands of specialist consultants and
craftsmen so that our discerning customers receive the best possible
advice and service. We keep in close contact with these specialist
partners which means that we learn a lot about what our customers
want. This knowledge helps us to get better and better.
We do all of this because we want to make sure that our products look
good not only in this catalogue but in real life, too. I am so convinced
by our floors and panels myself that I have used them in my own home
and feel good about recommending them to my friends. After all, every
floor, every wall or ceiling panel is also a calling card. A fact that we are
proud of.
95
Parquet and veneer flooring | Quality guarantees
Setting the standard for quality and
environmental awareness.
Get out there and experience nature with all your senses. We wish this not only for you but for all the generations to
come as well. When choosing our materials, we believe it is vital that they come from environmentally friendly sources.
We then turn them into flooring of an extremely high quality using modern production processes which are constantly
monitored and improved. Independent test centres confirm the ecologically sound nature of the materials used.
Real Wood
The Blue Angel
Naturally genuine: bring the authenticity of a natural wood surface into
your home with our real wood floors.
The result of our responsible choice of materials and modern production
processes is that all MEISTER floors carry the Blue Angel - the world’s
first and most well-known award for environmentally friendly products
and services. This means you can be sure that you are choosing a lowemissions, ecological floor.
96
or
RRAN
the
MeisterWer
ke
ditions
con
TY
cc
to
ty
ty a
ng
an
3
W
Warran
A
di
Y E AR
Living Area
S
0
wa
rr
The MEISTER warranty
We are so convinced of the quality of our parquet and veneer flooring
that we give you up to 30 years‘ warranty, depending on the collection.
A MEISTER floor is a floor which you will love for many years to come
because it is so easy to care for and has such a high-quality appearance
and excellent durability.
Warranty according to the MeisterWerke warranty conditions at www.meister.com
All MEISTER parquet and veneer flooring complies with all European
health and safety regulations.
FSC® label
The Forest Stewardship Council, abbreviated to FSC®, is an international
not-for-profit organisation which works for responsible forest
management. It is supported by renowned environmental organisations
such as Greenpeace, NABU, Robin Wood and the WWF. Only products
from responsibly managed forests and certified sources are permitted
to carry the FSC® label. Look out for FSC®-certified products in this
catalogue.
General building supervision permission granted by the Deutsches
Institut für Bautechnik (German Institute for Building Engineering).
97
Parquet flooring | Product structure
Layer by layer the highest quality system.
Two things make MEISTER floors particularly hard-wearing: the high-quality, carefully selected
materials and the intelligent, multi-layer construction. In combination with our strong HDF middle
layer, this guarantees you a durable floor which will remain attractive for many years to come and
which is also suitable for installation on subfloors with controlled hot water underfloor heating.
Parquet flooring product structure
3-layer product structure
Weartec Nature surface
| Natural oils and waxes penetrate deep into the wood
and form a protective, breathable surface. This type of
finishing emphasises the grain and structure, regulates
moisture and caters for a healthy room atmosphere.
Duratec Plus surface
| 7-layer seal with formaldehyde-free, viscoplastic,
UV-hardened acrylic varnish. This varnish is safe
for the environment and its special composition
means that it is especially durable.
Weartec surface
| The UV-hardened oil surface with special basic
treatment is applied at the factory and ensures
a particularly natural vibrancy.
Fine wood wear layer
| In 3.6 or 2.5mm genuine wood.
Backing
| Made from Nordic spruce veneer
for maximum rigidity.
98
Middle layer
| Specially bonded HDF board for simple installation, high stability
and increased impact resistance.
Veneer flooring | Product structure
Veneer flooring product structure
Duratec surface
| 7-layer seal with formaldehyde-free, viscoplastic,
UV-hardened acrylic varnish. This varnish is safe for
the environment and its special composition means
that it is especially durable.
Fine wood wear layer
| 0.6mm genuine wood.
Middle layer
| Specially bonded HDF board for simple
installation, high stability and increased
impact resistance.
Backing
| Multilayer backing for maximum rigidity.
Sound-absorbing cushion
| 1.3mm cork.
99
Product structure | HDF middle layer
Convincing inner values.
A particular quality feature in all MEISTER parquet and veneer floors is the specially bonded HDF middle layer.
HDF stands for high-density fibreboard. The most important component is hardwoods such as oak or beech.
Softwoods such as pine and spruce are added because their natural resins promote bonding of the fibres in
the board once compressed. Selected adhesives ensure maximum bonding. This HDF board has a great many
technical advantages.
Seven advantages of HDF parquet
The MEISTER product concept is based on an HDF middle layer.
MEISTER parquet with HDF middle layer
| It stabilises the wear layer, increasing the impact
resistance.
| It reduces room noise because HDF is twice as dense
as a spruce middle layer.
| It‘s easy to click together due to its precision-fit side and end
connections.
Parquet with spruce middle layer
Drop tests with ball (left) and wedge (right) from a height of 90cm onto
parquet with 3.6mm oak covering layer.
| It is quick to fit due to the smooth and easy click profile.
| It holds its shape better.
| Spruce fibres from the middle layer cannot show through to the
surface as with ordinary parquet floors.
| The precision-fit click systems with pre-tension ensure
a permanent joint lock.
100
Room sound (in the room itself)
Parquet and veneer flooring | Surface gradings
Flooring with character.
Characteristics such as structure, colour, surface treatment and finish create a variety of
flooring looks and make a major contribution to the overall impression of a room.
Depending on the combination, a peaceful feel or rustic appearance can be created.
Harmonious
Lively
The natural mix makes all the difference: for the “harmonious”
grading, we select fine woods with a restful look and balanced,
natural colouring. They do not contain many knots or much
sapwood or brownwood.
In this grading, we specifically offer surfaces with strong colouring and
structure which emphasise the natural character of the wood. Healthy
knots, sapwood and brownwood are part of the overall lively look.
Broken knots are professionally repaired.
Rustic
Distinctive
In this range we deliberately offer surfaces with strong colours and
structures, which emphasize the wood's natural character. Large distinctive knots and splints are part of the overall rustic image. Cracked
knots are professionally repaired.
Fascinating colouring and structure emphasise the distinctive character
of the flooring surface. High proportions of sapwood and brownwood
create the boldly expressive look. Cracked knots are professionally
repaired.
Parquet and veneer flooring are natural products. Differences in colour and structure are therefore an expression of their authenticity. Wood typically changes its colour when
subjected to direct sunshine. Depending on the intensity and amount of light exposure, light woods become darker or take on a yellow tinge. Darker woods become lighter.
101
Parquet and veneer flooring | Surface looks
Variety is built-in.
MEISTER offers three different strip looks which, in combination with selected woods and a variety
of surface treatments, provide great freedom of design. The very hard-wearing end grain wood with
its distinctive look and Fineline with its vibrant appearance create very special effects across the
laid floor.
1-strip
1-strip planks give a generous and expansive appearance.The surface is
made up of one piece of real wood throughout. Depending on the wood
and grading chosen the result ranges from rustic to elegant.
2-strip
Striking surfaces such as heartwood walnut or plum are particularly
effective in the 2-strip look. They radiate elegance and expansiveness.
3-strip
This look is made up of three rows of strips per plank. The fascinating
colour combinations mean that these floors work beautifully with the
widest variety of interior design styles.
102
End grain wood
To produce end grain wood floors, tree trunks are cut across the
direction of growth so that the growth rings are visible. This technique
ensures a particularly hard-wearing floor. End grain wood provides a
unique, unmistakable look which is perfectly suited for individual
interior design.
Fineline
This parquet has become an almost essential part of modern
architecture with its characteristic look. Fineline consists of
numerous narrow strips of wood laid side by side on one plank.
Broad Fineline
In this version of Fineline, strips of wood approx. two centimetres wide
run along the entire length of the plank. This produces a particularly
uniform look once laid.
103
Parquet and veneer flooring | Surface finishes
An exquisite selection.
Surface finishes with high-quality oils or varnishes underline the character of the particular woods
and ensure a durable, easy-care floor. Treatments such as brushing, liming and smoking give the
surfaces additional expression. And with our used-look, saw-cut and woodworm look finishes we
have three extraordinary new surfaces in our range.
Naturally oiled - Weartec Nature
The new, naturally oiled surfaces on our parquet flooring are based
on natural oils and waxes. Weartec Nature penetrates deep into the
wood and forms a protective, breathable surface. This form of finishing
creates a natural appearance with subtle sheen, emphasises the grain
and structure, has a moisture-regulating effect and ensures a healthy
atmosphere in the room. All parquet floors with Weartec Nature
surfaces are treated ready for use in living areas and there is no need
to apply oil after installation. Naturally oiled surfaces do require regular
care, however, to lend the floor a natural patina and ensure extraordinary
durability. If required, oil can be reapplied or touched up without
sanding the floor.
UV-hardened oil surface protection
Our UV-hardened oil brings out the best in many types of wood. It gives
them a warm, natural radiance. The Weartec surface is applied at the
factory and is a high-quality UV-hardened oil surface with a special basic
treatment. The floor is treated ready for residential use and is easy to
maintain, just like a varnished parquet floor, and therefore will not need
to be re-oiled.
104
Natural matt varnish seal | parquet floor
The natural matt varnish seal Duratec Plus on our parquet flooring
is particularly durable, easy to maintain and naturally kind to the
environment as it is solvent-free. The Plus stands for a variation on
our seven-layer Duratec varnish composition. The mixture of varnishes
in the individual layers and the order in which they are applied take
account of the fact that parquet floors may be sanded. Each element
in the composition consists of formaldehyde-free, UV-hardened and
ecologically sound acrylic varnish. All of this means that Duratec Plus
provides an easy-care and long-life surface for parquet floors.
Natural matt varnish seal | veneer floor
The environmentally friendly varnish seal on our veneer flooring
is particularly durable and easy to maintain. Each element in the
varnish composition consists of formaldehyde-free, UV-hardened
and ecologically sound acrylic varnish. This varnish is particularly
tough since, unlike with parquet floors, we did not have to take
into account that these floors might ever be sanded.
105
Parquet and veneer flooring | Surface finishes
Brushed wood
Brushing the wood's surface opens the pores of the wood and at
the same time brings out its natural structure. Each plank has its own
individual look and a relief is created which lends the floor character.
An ideal basis for modern or rustic design styles.
Limed wood
Liming emphasises the grain of the wood and gives it an attractive
surface. After brushing, a lime paste is applied. Once this has dried
the excess is removed and the surface is coated with natural oil,
UV-hardened oil or natural matt varnish. Oak is particularly suitable
for liming due to its large pores.
Smoked wood
Smoking causes the tannic acid in the wood to react so that its colour
is permanently altered, deep down. Oak turns brown to dark brownblack, Douglas fir turns light brown to red-brown. Each plank has a
different tannic acid content which leads to interesting colour differences
on each individual plank - firm evidence that you have a piece of living
nature.
Colour-treated wood
Some surfaces, such as white beech, white oak, old grey oak and
white ash are produced with pigmented varnishes or oils. This gives
the planks their particular colouration and at the same time the natural
structure of the wood is retained. As with liming, the surface is given a
final coat of natural oil, UV-hardened oil or natural matt varnish.
106
Used look
This surface finish gives the parquet floor an antique appearance.
The planks are given a variety of looks and appear naturally aged
through the application of the latest technology and laborious
hand finishing.
Woodworm look
Our parquet floors with woodworm look surfaces are particularly
unusual. Hundreds of little one to two millimetre holes give the
impression of woodworm attack but of course the impression is
merely visual.
Saw-cut structure
For parquet flooring in saw-cut look, saw cuts run against the grain.
They can be clearly seen and felt and gain additional emphasis from
the matt-gloss surface finish.
Natural wood
The character of selected woods comes into its own even without
finishing processes. Many MEISTER parquet floors are therefore simply
oiled or varnished. The homely result is wood in its natural form.
107
Parquet and veneer flooring | Click systems
Simple, quick and secure –
Masterclic Plus.
Simple, quick and secure installation – this applies to all of our parquet and veneer flooring.
Apart from the extremely long PD 550 collection planks, which have to be bonded at the
ends for stability reasons, all of our floors can be laid without using adhesive. Click systems,
optimised for each floor‘s characteristics and each plank‘s dimensions, cater for great ease
of installation. These include our own patented innovation, Masterclic Plus, allowing you to
enjoy your floor right from the installation process.
The proven pre-tension system ensures a lasting, secure joint lock on
long and short sides (in PS 400 and FS 200 S collections). In many of
our collections we have replaced the Uniclic connection on the short
side with our own Masterclic Plus or Masterclic.
This click technology is used on the short sides of the parquet
collection PS 350. It makes installation simpler and gives a
long-lasting and secure connection between planks.
108
1
2
The flooring is lowered right next to the neighbouring plank.
3
After lowering, the flooring is not yet locked at the ends.
4
The tongue is only activated when the next row is laid.
5
This results in a secure connection.
6
To disassemble the flooring, the locked row is lifted and levered out.
The end connection can be unlocked by levering it out.
Masterclic Plus end connection
Masterclic Plus
The patented system for quick installation and
secure connections.
http://www.meister.com/fs/en/good-to-know/innovation/
click-connection/masterclic-plus.html
The unique combination of the non-adhesive Masterclic Plus
click system:
| There are no protruding, difficult-to-handle tongues at the ends
which could lead to an opening of a joint when lowering the plank.
| In contrast to the common “fold-down” laying methods, the ends
do not lock in the moment the plank is laid.
| As soon as the next row of planks is laid, the Masterclic Plus click
system is activated and its fixings lock automatically.
| The specially developed and patented profile
geometry with height and side levelling secures the exact end
positioning of the planks. This creates a pre-tension which ensures
a durable joint lock.
| When disassembling the flooring, the Masterclic Plus connection
can easily be pivoted out.
109
Accessories
Lighting and accessories details which simply fit.
A perfect living atmosphere is created when all the elements in a room are
perfectly coordinated. The right skirting board for an appealing finish to the
flooring and special profiles for neat transitions to other rooms are a part
of this. Recessed lights can contribute greatly to the mood in a room with
their unique light play. We offer you the right care products so that you can
continue to enjoy your floor long after it has been fitted. They ensure gentle
cleaning and give your floor lasting protection.
MEISTER quality
We focus on the quality of the materials we use in our accessory
range just as we do with all our other products. For example, we apply
high-quality laminate films and cork and wood veneers to our edging
profiles. And our modern LED lighting range offers high-performance,
German-made high and low voltage systems for your lighting design.
Customer-friendly installation
We spend a lot of time developing customer-friendly products. Our
technologies are well-thought-out and you will notice the benefits of
MEISTER quality when you are laying a floor or fitting panels to the
ceiling or walls.
110
111
Accessories | Mouldings
Flooring accessories for the perfect finish.
Mouldings for parquet and veneer flooring
The MEISTER real wood mouldings consist of a stable MDF core and
high quality real wood veneers. Our five edging profiles are available
with all surfaces in the real wood range. For the varnished mouldings
we use a particularly abrasion-resistant varnish coating. So you will
always find the right way to finish off any floor.
Skirting board 1 MK profile
Skirting board 2 PK profile
Skirting board 3 PK profile
Skirting board 4 MK profile
Skirting board 5 PK profile
112
Accessories | Mouldings
Skirting board 9 PK and 8 PK profiles
This skirting board, with its modern square-edged shape, is available
in 16 different colours. Skirting boards with primer film coating can
be painted in any colour you like.
Skirting board 9 PK profile (80mm), 8 PK profile (50mm)
Cream textile 6146
Grey textile 6149
Anthracite textile 6150
Slate sahara 6138
Slate grey 6136
Slate anthracite 6137
White sandstone 6047
Travertine 6048
Beige marble 6045
Sandstone 147
Dark-grey sandstone 6046
Plain pure white 6097
Shiny plain white DF 324
Primer film
(can be painted) 048
Stainless steel DF 063
Anthracite DF 059
Skirting board 9 PK and 8 PK profiles are available in the colours shown.
Hamburg skirting boards
The traditional white “Hamburg” skirting board is mainly found in old
buildings, but its profile provides a generous effect in modern surroundings
too. We supply it in four profile heights: 60mm (10 PK profile ), 80mm
(11 PK profile), 100mm (12 PK profile ) and 120mm (13 PK profile).
Each can be used with any of our laminate floors. All of the skirting is
available in white or with a white primer film which you can paint any
colour you like.
Shiny plain white DF 324
Primer film
(can be painted) 048
Skirting board 13 PK (120mm), 12 PK (100mm), 11 PK (80mm),
Skirting board 13 PK, 12 PK, 11 PK and 10 PK profiles are available in the colours
10 PK (60mm) profiles
shown.
113
Accessories | Mouldings and clips
Skirting board 6 and 7 profiles
Skirting board 6 and 7 profiles can be combined with many of our
mouldings. They cleverly cover uneven areas and larger gaps between
the floor and the wall. This makes them ideal for renovation work.
Skirting board 6 profile (in combination with 5 PK profile)
Shiny plain white DF 324
Primer film
(can be painted) 048
Skirting board 6 and 7 profiles are available in the colours shown.
Skirting board 7 profile (in combination with 5 PK profile)
Fixing clips
Moulding clips are popular simply because they are so practical. The
mouldings can simply be clipped on and don't have to be nailed down and they offer space to hide cables. An extra plus: our fixing clips do
not require wall plugs, saving you work. If you want to redecorate your
room at a later stage you can quickly and easily unclip the mouldings
before painting or wallpapering.
Fixing clip for skirting board 1 MK and 4 MK profile
Fixing clip for skirting board 2 PK, 3 PK, 5 PK, 8 PK, 8 PK E, 9 PK, 10 PK,
11 PK, 12 PK and 13 PK profile
114
Accessories | Corners and end caps
Corners and end caps
When using internal and external corners, achieving a precision mitre
cut is no longer necessary. These were originally intended for our
laminate collection and are now available in nine wood effects, white
and stainless steel look. They can, of course, be combined with our
real wood and cork profile mouldings.
White oak 2014
Maple 2009
Beech 2011
Natural oak 2013
Oak 2012
Jatoba 2016
Light cherry tree 2015
Light walnut 2017
Dark walnut 2018
White 2001
Stainless steel look 2002
Matching skirting board 1 MK profile | End cap Internal corner External corner
Corners and end caps are available in the colours shown.
Matching skirting board 2 PK profile | End cap Internal corner External corner
Matching skirting board 3 PK profile | End cap Internal corner External corner
115
Accessories | Radiator rosettes and door stoppers
Radiator rosettes, real wood
A radiator rosette can reliably cover up the expansion gap between
the flooring and the radiator pipe. They are simply clipped around the
radiator pipe.
The all-round perfect finish.
Canadian maple 027
American cherry tree 014
Light beech 020
Walnut 015
Beech 019
Wenge-stained oak 010
Oak 001
Radiator rosettes in real wood are available in the colours shown
Radiator rosettes, real wood, solid, ø 15mm, ø 18mm, ø22 mm
Door stoppers
Requiring only an 8mm-deep screw hole and with its special angled
design, this discrete door stopper secures all doors without locking the
floating floor installation. This avoids undesirable tension.
Canadian maple 027
Light beech 020
Beech 019
Oak 001
American cherry tree 014
Walnut 015
Real wood door stoppers are available in the colours shown.
116
Door stoppers, real wood, solid, 8mm screw depth
Accessories | Aluminium profiles
Clip-on profiles
With these clip-on profiles, you can create flowing floor transitions with
no visible screws. The profiles are available in five real wood veneers as
well as one cork and two metal surfaces.
Type 588 E Clip-on transition profile | 10 to 16mm
Type 586 E Clip-on joining profile
Type 587 E Clip-on end profile
10 to 16mm
10 to 16mm
Maple 363
Beech 361
Oak 362
Cherry tree 364
Walnut 368
Cork 365
Stainless steel surface 367
Anodised sand 366
Clip-on profiles are available in a variety of colours including those shown.
“Flexo” clip-on transition profile
With its especially broad bottom profile, the new clip-on transition
profile “Flexo” can be securely fitted to the sub-floor. Thanks to its
patented swivel joint design, it adapts precisely to the height and angle
of different flooring heights and absorbs movement from neighbouring
floor coverings without ratcheting. This system guarantees simple
fitting and removal of the covering profile. There are 41 decors to
choose from, designed to match the laminate floor collections
LD 300 | 20 Melango, LD 200 and LS 300, as well as three metal surfaces.
“Flexo” clip-on transition profile | 7 to 18mm
Tilt adjustment 4 to 21mm
White old wood 6128
White oak harmonious 6139
Light oak 6147
Arctic white oak 6503
Antique white pine 6062
White spruce 6025
Silver-grey pine 791
Maple 6017
Maple 202
Beech 201
Light oak harmonious 6133
Natural oak 6151
Light oak 286
White oak 6033
Brown old wood 6129
Grey oak 6132
Dark oak 6148
Oak 6032
Oak 6079
Rustic oak 6061
Oak 6055
Medium oak 6131
Antique pine 6034
Beech 795
Cherry tree 6013
Cherry tree 797
Natural oak 287
Limed oak 6027
Limed medium oak 790
Brown oak 6036
Sipo 6043
Walnut distinctive 6086
Light walnut 6141
Antique oak 6029
Antique brown oak 6031
Walnut lively 6140
Walnut harmonious 6039
Walnut 6026
Smoked oak 6028
Smoked oak 6085
Smoked oak 6035
Anodised silver 220
Stainless steel surface 340
Anodised sand 230
“Flexo” clip-on transition profiles are available in a variety of colours including those shown
117
Accessories | Aluminium profiles
Universal profiles
The professional solution for transitions, ends and expansion joints.
The especially broad bottom profile of the type 288 B and 287 B
universal profiles facilitate secure anchoring in the subsurface.
Type 287 B Universal end profile | Anodised silver 220
Anodised silver 220
Stainless steel surface 340
Anodised sand 230
Anodised gold 221
Anodised bronze 222
Universal aluminium profiles are available in the colours shown.
Type 286 Universal joining profile | 6.5 to 16mm
Type 288 B Universal transition profile | 6.5 to 16mm
Type 287 B Universal end profile | 6.5 to 16mm
118
Accessories | Aluminium profiles
Universal transition profiles
The universal transition profile “Flex” bridges differences in height of
up to 12mm between two floor coverings. Our “Magic” profile perfectly
hides cables and connector strips.
Type 888 Universal transition profile “Flex” | 7 to 17mm
Type 551 Universal transition profile “Magic” | 7 to 16mm
Self-adhesive end profile
With the type 369 SK self-adhesive profile, you achieve a drillhole-free
finish for patio doors or windows at ground level.
Anodised silver 220
Stainless steel surface 340
Anodised sand 230
Anodised gold 221
Anodised bronze 222
Type 369 SK end profile (self-adhesive)
The self-adhesive end profile is available in the colours shown.
119
Accessories | Aluminium profiles
Universal stair profile
Stairs can easily be covered using MEISTER flooring in combination
with the right profiles. For parquet, veneer, cork, linoleum and laminate
flooring.
Type 320 Universal stair profile | 7 to 16mm
Anodised silver 220
Stainless steel surface 340
Anodised sand 230
Anodised gold 221
Anodised bronze 222
Universal stair profiles are available in the colours shown.
Fitting angles
The sloping angle 3402 helps where tread depth must be maintained.
Where steps protrude the fitting angle 3400 ensures a good hold for
the covering.
Sloping angle 3402 maintains the step depth when covering stairs
Fitting angle 3400
120
Accessories | Underlay material
Underlay material
The special PUR mineral compound makes MEISTER Silence 25 DB or
MEISTER Silence the very best insulating underlay for effective room
and footfall sound absorption. At MEISTER, you will find films and a
large selection of underlay materials for concrete screed, wooden
floorboards and other sub-surfaces as well as the right insulating
underlay for your needs.
Overview
Silence 25 DB
Silence 20
Elastico DB
Duo-Guard
Foam film
PE film
3mm
2.5mm
2mm
2mm
2mm
0.2mm
Room noise reduction
•••
••
••
•
•
Footfall noise reduction
••
••
•••
••
••
Suitability for use with underfloor heating
•••
•••
••
•
•
•
•
•
••
••
Compensates uneven surfaces
•••
•••
••
•
•
Pressure resistance
•••
•••
•
••
••
Moisture protection
✔
No
✔
✔
No
Material thickness approx.
Heat insulation
Suitability: ••• excellent
•• good
• limited
•••
✔
✔ yes
MEISTER Silence 25 DB | approx. 3mm with integral moisture barrier
MEISTER Silence 20 | approx. 2.5mm
MEISTER Elastico DB | approx. 2mm with integral moisture barrier
MEISTER Alu Strip for bonding the run joints for Silence 25 DB and Elastico DB
121
Accessories | Underlay material
MEISTER Duo-Guard | approx. 2mm with integrated vapour barrier and butting
edge sealing
MEISTER foam film | approx. 2mm – especially robust thanks to its high density
122
MEISTER polythene film | 0.2mm
Accessories | Lighting
Lighting and technical accessories skilfully setting the scene for your flooring.
LED recessed light
Our FLAT recessed lights really shine with their compact size and only 7mm installation
depth. The FLAT mini is so small that it can be installed in a clip-on skirting board. Four easily
interchangeable colour films provide variety and are also suitable for printed designs such as
logos. You can operate 20 FLAT or ECO lights connected in series from one transformer. There
is easily enough space for this in an existing recessed socket and no extra drilling is required.
12 V
Technical Details on FLAT-Quadro / -Punto
| Drill hole diameter: 80mm
| Installation depth just 7mm
| Surface: stainless steel
| System voltage: 12 V
| Suitable for humid rooms, splash-proof “IP x4”
| incl. coloured filters: red, blue, yellow, green
| incl. 2m LED extension cable
| Suitable for installation in walls, floors and ceilings
| Can be used with printed filters to display symbols (logos etc.)
FLAT-Quadro LED recessed light and FLAT-Punto LED recessed light | 0.4 watt
12 V
Technical Details on ECO-Light-Quadro / -Punto
| Drill hole diameter: 58mm
| Installation depth just 7mm
| Surface: stainless steel
| Available as a set of 2
| System voltage: 12 V
| incl. 2m LED extension cable
| Suitable for installation in walls, floors and ceilings
ECO-Light-Quadro LED recessed light and ECO-Light-Punto LED recessed light
0.3 watt
12 V
Technical Details on FLAT mini
| Drill hole diameter: 25mm
| Installation depth: 10.5mm
| Surface: stainless steel
| Available as a set of 2
| System voltage: 12 V
| incl. coloured filters: red, blue, yellow, green
| incl. 1m LED extension cable
| Suitable for installation in walls and ceilings
| Can be used with printed filters to display symbols (logos etc.)
FLAT mini LED recessed light | 0.4 watt
123
Accessories | Lighting
co
r
to
the
MeisterWer
k
ndit
ions
RRAN
co
TY
ac
ng
light
bulbs
MEISTER warranty
ty
A
ty
di
With the
exception of
an
W
Wa r r a n
12 V LED lighting means:
| Outstanding bulb life of over 30,000 hours
| Maximum light from minimum wattage
| Smallest possible dimensions for a delicate appearance
YE AR
S
LED technology
3
12 V
a
ew
rr
MEISTER LED lights have been developed in the smallest of
sizes. But it is not only their size that is impressive - their
durability and splash protection (FLAT-Quadro/-Punto) are also
convincing features. LED lighting is more than just decorative
lighting. Its low power consumption makes it perfect for
directed lighting - for example in bedrooms and hallways.
The outstanding quality of our lighting
system allows us to grant you a 3-year
warranty (light bulbs excluded).
Warranty in accordance with the
MeisterWerke warranty conditions
at www.meister.com.
VDE-approved
The MEISTER lighting system is constantly
monitored by the German Association for
Electrical, Electronic & Information
Technologies (VDE). This ensures that the lights
comply with the required safety standards.
Technical accessories
An extensive range of accessories is available for the MEISTER lighting
range. Your specialist retailer will be pleased to advise you.
12 V
LED-Tronic transformer 0.1-10 watt, direct current
FLAT concealed socket
12 V
5m LED extension cable (only for FLAT)
124
230 V
4m HV feeder, with foot switch and Euro flat plug
Accessories | Installation accessories and tools
Installation accessories
Whether you need fitting wedges or a tension rod - you will find the
tools you need to lay your floor in our range.
Tension rod
Wooden wedges for the right wall spacing
MEISTER polythene film | 0.2mm
Installation tool
Tools designed especially for use with LED recessed lights make it
easier to achieve precise installation.
Holder for keyhole saws, including Ø 6mm drill bit
Ø 59mm keyhole saw | Ø 80mm keyhole saw
Ø 25mm drill bit suitable for FLAT mini
125
Accessories | Care product range
Care products
Our extensive range of cleaning and care products ensures that you will
have many years of pleasure from our floors. There are even special gentle
cleaning products for stubborn dirt.
At a glance
Use our handy product disc to help you find the
right care product. It tells you which cleaners and
special cleaners are right for your floor as well as
the recommended care products.
Repair kit
The MEISTER repair kit is intended for professionals. It contains a wide
variety of materials for repairing minor damage.
126
4
011138 624088
01 |12
968007002A01
© 2006–2012 by MeisterWerke Schulte GmbH
For reasons of printing technology, colours and structures may vary from the reproductions shown here.
We reserve the right to make changes. No responsibility is assumed for errors.
MEISTER – a brand of MeisterWerke Schulte GmbH | Zum Walde 16 | D-59602 Rüthen-Meiste
Phone: + 49 (0) 29 52 . 816 - 0 | Fax + 49 (0) 29 52 . 816 - 66 | www.meister.com