hfe-30 homesteader sawmill - Hud-Son

HUD-SON
FOREST EQUIPMENT For the work you do.
FOR THE WORK YOU DO. 8 0 0 . 765.SAWS • W W W. H U D -SO N . C O M
Portable Sawmills & Wood Processing Products.
800.765.SAWS • WWW.HUD-SON.COM • INFO@HUD-SON.COM
A Little History About Our Company ...
I would like to take this opportunity to share with
you, a little of my family history and our company's
history. In 1946, my Grandfather, Oscar Hudon began
logging and farming in Crown Point, New York near
Lake Champlain, with his sons Daniel, Omer, Paul and
Maurice. They quickly gained respect in their community and earned a reputation for quality and hard work.
Through the years, their reputation has continued to
stand strong. Being a third generation Hudon, these
qualities and values were passed on to me and continue
to be the cornerstone of our company today. In tribute
to my Grandfather, we named our line of bandmills
after him and continue to carry on his commitment of
hard work and quality. The name Hud-Son derived
from Hudon and Son. When you look at our equipment,
you will see the years of development, testing and
hands on knowledge. These key factors have shaped
our product line and maintained our reputation for
value and excellence in the forest industry.
Hud-Son Forest Equipment, Inc. has evolved into
a worldwide manufacturer and distributor of forestry
equipment, with a network of servicing dealers. Our
dealers are widespread offering local sales and service
in many areas. We fully support all of these dealers,
which allows you, our customer, to have the best of
both worlds. If you are close to Upstate New York, we
invite you to visit us directly. Our staff of over 65 well
trained professionals are ready to assist you in finding
the right piece of equipment at a price you can afford.
Always courteous, they will strive to make your purchase or service a pleasant experience.
I want to thank you again for your interest in our
equipment. You will be pleased as we are to see many
new additions to our catalog. We proudly make our
products in the USA. Please feel free to contact us with
any questions or comments you may have.
Sincerely,
Daniel J. Hudon
President
All the wood for this cabin was cut on a
Hud-Son Sawmill, inside and out.
A lovely fall evening in Oregon.
Joe Vardanega
Hud-Son Mill Owner
2
HUD-SON
FOREST EQUIPMENT
4
Manual &
Hydraulic Sawmills
I
N
D
E
X
20 - Hud-Son Edger 1913 is a lumber and 34 - Stake Sharpeners, Log Tools & Accessories Build beds, tables, railings
board edger.
& more. Great for the craftsman,
21 - Hud-Son Firewood Bundler comes
hobbyist & homeowner.
standard with wheels to make it easier
for maneuvering around the worksite
FINANCING MADE EASY
and for storage.
18
Why Buy A
Hud-Son Sawmill?
22 - Hud-Son Firewood Processors
are an efficient and well built piece
of equipment with a wide range of
accessories.
27 - Hud-Son Firewood Woodsplitters
are built tough in the USA.
28 - Conveyors are constructed on a
heavy steel frame and make any job
easier.
22
Firewood
Processors
Community Bank NA
101 Main St., Boonville, NY 13309
315.942.4460
New York & Pennsylvania
residents only!
Visit www.communitybankna.com
for more details.
Access Equipment & Financing, LLC
109 Brethren Dr., Pleasant Hill
OH 45359
866.892.0315 toll free or visit
www.accessequipmentfinancing.com
30 - Uniforest Cable Winches fit any size
farm tractor and turn it into a safe and
low impact log skidder. With decades of
use in the field these winches have
New or used equipment call for more instood the test of time.
formation. *with approved credit.
32 - Grapples and Rotators - We have it
all - Before you buy, compare prices for
grapples at Hud-Son.
33 - Hud-Son Screeners removes stones,
sod, sticks and other debris from
dry top soil.
30
Uniforest
Winches
OUR WARRANTIES - SOLID & SOUND
WE STAND BEHIND OUR SAWMILLS AND ALL OUR PRODUCTS.
Forest equipment for the work you do.
3
HFE-21 HOMESTEADER SAWMILL
4
Standard Features Include: 21" log capacity, 2-6’ track sections, 6.5 HP gas engine. Centrifugal
clutch, 1.5” band wheel bearings, 16” band wheels, blade lubrication system, hand winch lift system, dual measuring system with quarter scale and standard inches or metric, dual Hud-Son guide
system with fixed guides, two standard log dogs and squaring back stops, 1.25” Hud-Son band
blade. Optional electric model available with 5 horse power 230V AC single phase motor.
This economical sawmill can be easily stored when not in use, it is light weight and can fit into the
corner of your garage or barn for storage. It is compact but built tough like our larger sawmills.
The blade guides are Hud-Son Shoe Guides which provide the best blade support available. We
use heavy duty 1.5” shafts and bearings. The sawmill is pushed though the log with almost no effort. It has a hand crank to adjust board thicknesses. The sawmill can cut boards as thin as paper.
Maximum board width is 19”. This sawmill is ideal for sawing your logs into boards or re-sawing
boards to the needed dimension. Imagine how handy it would be if when you needed a board or
two if you could just saw it up right on the spot. Now you can build that shed, fix that wagon, saw
lumber for the tree house, there are unlimited possibilities for a very small price.
HFE-21 HOMESTEADER SAWMILL
Unlim
s
e
i
t
i
l
i
b
i
s
ited Pos
The HFE-30 sawmill is an important and handy tool to have at home or around the farm.
With a log capacity of 30” and optional unlimited lengths of cut you can easily and efficiently
saw boards and beams which can be used in your home construction and maintenance projects.
With the manual height adjustment you can quickly and accurately adjust the thickness of
cut to the 1/16”. The adjustable Hud-Son dual guide system and the built in blade lubrication
system will keep the blade true and cool.
HFE-30 HOMESTEADER SAWMILL
HFE-30 HOMESTEADER SAWMILL
Standard Features Include: 30" log capacity, 2 - 7’ track sections, 13 HP gas engine. Centrifugal clutch, 1.5” band wheel bearings, 19” band wheels, hand winch lift system, dual
measuring system with quarter scale and standard inches or metric, dual Hud-Son guide
system with adjustable guide, two standard log dogs and squaring back stops, 1.25” HudSon band blades, blade lubrication system, optional extra length track sections.
5
HFE-36 HOMESTEADER SAWMILL
6
Standard Features Include: 36" log capacity, 2 - 7’ track sections, 16 HP V-twin gas engine, Centrifugal clutch, 1.5” band wheel bearings, 19” band wheels, hand winch lift system, dual measuring system with quarter scale and standard inches or metric, dual Hud-Son guide system with
adjustable guide, two standard log dogs and squaring back stops, 1.25” Hud-Son band blades,
blade lubrication system, optional extra length track sections.
The HFE-36 sawmill is an important tool for any homestead. Whether your land offers you large
or small diameter logs, hard or soft woods, the HFE-36 will turn them into beautiful boards. With
the 36” diameter log capacity and 16hp engine the HFE-36 gets the job done. The proven HudSon guide system will keep your cuts true and efficient, while the easy to use cam style log dogs
hold your log or cant in place. Hud-Son dual measuring system allows the operator to measure
boards using a quarter scale or inches. Just like all Hud-Son mills the HFE is built to last with 1.5”
pillow block bearings and sturdy design. Build your barns, fences, homestead with the extremely
affordable HFE-36.
HFE-36 HOMESTEADER SAWMILL
Mills for
.
o
d
u
o
y
k
r
o
w
e
h
t
These bandmills are so portable that most ATV’s can tow them almost anywhere if you have a
trailer. The Oscar 121 comes standard with a 10 HP engine, cuts 21" diameter logs and has 2 - 6’
ground tracks w/log dog assembly. Also a trailer is available for off road or deep woods towing.
This will totally out perform chain saw mills with the narrow kerf cut. The Hud-Son thin kerf band
mill blades save lumber and you get a smoother finish.
OSCAR 121 SAWMILL
OSCAR 121 PORTABLE SAWMILL
Standard Features Include: 21" log capacity, 2-6’ track sections, 10 HP gas engine. Centrifugal clutch,
1.5” band wheel bearings, 16” band wheels, hand winch lift system, dual measuring system with
quarter scale and standard inches or metric, dual Hud-Son guide system with adjustable guide, two
standard log dogs and squaring back stops, blade lubrication system, powder coat finish and 1.25”
Hud-Son band blades.
7
OSCAR 328 PORTABLE SAWMILL
8
Standard Features Include: 28" log capacity, 2 - 6’ track sections, 10 HP gas engine. Centrifugal
clutch, 1.5” band wheel bearings, 16” band wheels, hand winch lift system, dual measuring system with quarter scale and standard inches or metric, dual Hud-Son guide system with adjustable guide, two standard log dogs and squaring back stops, 1.25” Hud-Son band blades,
blade lubrication system, optional extra length track sections are available.
The Oscar 328 Bandmill will accept 28" diameter logs with 12' of 2" angle iron track and is very
affordable. It will even fit in the back of a short box pick-up truck! This model has a 10 HP motor.
Also a trailer is available for off road or deep woods towing. Optional electric model available.
Includes a 5 hp 230 volt single phase motor. Options include 6’ track extensions w/log dog assembly, bandmill blades WM132, and a RPM & hour meter.
OSCAR 328 SAWMILL
Available options include a 12 V power feed with adjustable speed control forward & reverse,
log ramps for trailer model, extra log dog assembly, 7’ ground tracks, bandmill blade WM167,
RPM & hour meter, low tone muffler system, 16’, 20’, 24’ and 28’ trailer.
The Oscar 330 Pro is stealing the portable sawmill market with its affordability and efficiency.
This model is economically priced for any wood cutter. This portable sawmill can accommodate
a 30" diameter log and provide you with all of your lumber needs.
OSCAR 330 PRO
SAWMILL
OSCAR 330 PRO SAWMILL
Standard features include 14’ ground track 2-7’-sections, 30” diameter log capacity, 16 HP engine electric start, 2 adjustable log dogs, blade lubrication system, centrifugal clutch, four post
system with 1.5” square tube, standard industrial 1.5” pillow block bearings on drive & driven
bandwheels, 19” diameter bandwheels, doublehard Hud-Son blade, powder coat finish, standard with Hud-Son shoe guides, dual measuring system: 4, 5, 6 & quarter scale & standard 1”
scale. This and all Pro models now come standard with a 5.5 gallon lubrication system.
9
OSCAR 236 PORTABLE SAWMILL
10
Standard features include a 36" diameter log capability, 2 - 7' ground tracks log dog assembly, 16
HP V twin engine, four post system 1.5" square tube steel frame, electric start, built in lubrication
tank also functions as a cross support, electric power height adjustment with 1/16” scale, vibration
reducing pyrathane bandwheel belting, Hud-Son guides, 1" bottom board capability, 5.5 gallon
lube tank, Hud-Son saw blades, centrifugal clutch, and a durable powder coat finish.
Available options include a 12V power feed with forward and reverse, trailer lengths available include 16’, 20’, 24’ and 28’, log ramps for trailer units, extra track for ground units, and extra log
dog assembly.
This sawmill is one of Hud-Son's best selling units. The Oscar 236 makes quick work of any log-tolumber to meet your needs around the farm or ranch using a 12 volt winch to control the height
of the sawmill head. The Oscar 236 also features a 16 HP V-twin overhead valve motor allowing
you to slice through any wood up to 36" in diameter. The Oscar 236 is available as a ground unit or
complete unit on a trailer.
OSCAR 236 SAWMILL
Available options include 12V power feed with forward and reverse, trailer lengths available include 16’, 20’, 24’ and 28’, log ramps for trailer units, extra track for ground units, and extra log
dog assembly.
Introducing one of the newest models in the Pro series of sawmills from Hud-Son Forest Equipment. Our research and development team has come up with this new series of sawmills due to
the increasing demand from our customers that need a little more horse power for those tough
jobs. We set our design team into action and they delivered the Hud-Son 436 Pro. This model
has a new sleeker look with our new halo style frame design to accommodate the powerful 28
HP engine.
OSCAR 436 PRO SAWMILL
OSCAR PRO SERIES 436 PRO
Standard features include a 36” log capacity, a 28 HP electric start engine, RPM and hour meter,
soft start electric clutch, 2-7’ sections of ground track with 2 log dogs, 19” bandwheels, HudSon bandblade, four post head with 1.5” square tubing with new halo design, standard 1.5” pillow block bearings, rugged 12 volt winch to raise and lower head for height adjustment, standard
Hud-Son shoe guides, dual measuring system: 4, 5, 6, and 8 quarter scale and standard 1” with
1/16” scale, a 5.5 gallon lube tank, and has a durable baked on powder coat finish.
11
OSCAR PRO SERIES 536 & 636 PRO
12
Standard features include a 36” log capacity, a 35 HP gas engine on 536 and a large diesel engine
on the 636, RPM and hour meter, Centrifugal clutch, two 7’ sections of ground track with 2 log
dogs, 19” bandwheels, Hud-Son bandblade, blade lubrication system, four post head with 1.5”
square tubing with new halo design, standard 1.5” pillow block bearings, rugged 12 volt winch
to raise and lower head for height adjustment, standard Hud-Son shoe guides, dual measuring
system: 4, 5, 6, and 8 quarter scale and standard 1” scale, a 5.5 gallon blade lubrication tank,
and has a durable baked on powder coat finish.
Available options include a diesel engine, (Oscar 636), 12V power feed with forward and reverse,
trailer lengths available include 16’, 20’, 24’ and 28’, log ramps for trailer units, extra track for
ground units, and extra log dog assembly.
The 536 and 636 Pro models are the absolute newest mill in our Pro series of sawmills from
Hud-son Forest Equipment. Our design team never fails to jump to action and delivered the
very latest. These models have a sleeker look with our new halo style frame design to accommodate the powerful engines.
OSCAR 536 & 636 PRO SAWMILL
Ultimate Power
FARMBOSS SAWMILL
FARMBOSS
This sawmill is built farm tough with many standard features included. Within 10 minutes of
arrival you're ready to cut lumber. The four post system with 2” square tube frame is extra
heavy duty and rugged for long term dependability. Equipped with an electric powered winch
for touch of a button height adjustment makes this sawmill user friendly and ready to cut on
the spot. Whether towing or around the farm, the Farm Boss is sure to meet your needs.
Available options include 31 HP V-twin and 34 HP diesel, a 5.5 gallon lubrication tank, 12 V
power feed w/adjustable speed control forward & reverse, 12 volt cable operated log loader
& turner w/ramps, 25” bandwheels, extra log dog assembly, bandmill blade WM167, optional
electric brake axle, and a RPM & hour meter gas model.
SAWMILL
Standard Features Include: 36" log capacity, accepts logs up to 21’ long, 23 HP twin cylinder
engine, electric start, Centrifugal clutch, 1.5” band wheel bearings, 19” band wheels, 12 V
winch power height adjustment system, dual measuring system with quarter scale and standard inches or metric, 3 adjustable log dogs and squaring pins, 24’ bed 3x6 box beam trailer
with cross supports, light kit for road travel, fenders, 6 adjustable support legs, blade lubrication system, extra heavy duty carriage head, four post system with 2” square tube, powder
coat finish and Hud-Son band blades. Standard industrial 1.5” pillow block bearings on drive
and driven bandwheels, and standard with Hud-Son shoe guides.
13
H360 HYDRAULIC SAWMILL
14
Standard Features Include: 36" log capacity, accepts logs up to 18’ long, 23 horse power twin
cylinder Briggs and Stratton Vanguard engine, electric start, Centrifugal clutch, 1.5” band wheel
bearings, 19“ band wheels, 12 V winch power height adjustment system, dual measuring system
with quarter scale and standard inches or metric, 3 adjustable log dog and squaring pins, 24’
bed 3x6 heavy duty box beam trailer with cross supports, light kit for road travel, fenders, 6 adjustable support legs, blade lubrication system, extra heavy duty carriage head, four post system
with 2” square tube, powder coat finish, Hud-Son band blades, and hydraulic log loader and
turner. Standard industrial 1.5” pillow block bearing on drive and driven bandwheels, and with
standard Hud-Son shoe guides. Optional 35 HP gas engine. Optional hydraulic log dog and optional hydraulic back stops.
This mill is built with a heavy duty frame and has a few popular features. This unit has our standard 36” log capacity with ability to cut a 18’ long log standard. It comes with a 23 hp engine,
adjustable power feed, a hydraulic log loader, and hydraulic log turner. The clamping of log,
and back stop adjustments are done manually. New optional fuel injected Subaru Robins motor
available with electric soft start clutch.
H360
HYDRAULIC
SAWMILL
OSCAR 52 SAWMILL
CUSTOM
MADE SAWMILL
60” Log Capacity
The 60” mill was custom designed to cut
miles of plastic pipe. This mill more commonly can be used to handle large trees from
municipalities or tree services that can be
turned into valuable lumber, table tops and
bar tops. The Hud-Son 60” custom made
sawmill included a 34 HP diesel engine, 30”
band wheels, 5.5” Centrifugal dual belt drive
clutch and drive pulley, 1.5” pillow block
bearings on drive and driven band wheels,
56” between guides, 42” maximum cut
height, and a 28” depth of cut. Comes with a
16’ heavy duty 3x6” box beam ground track
sections with log dogs and adjustable support legs, Carter blade guides, 12V winch for
raising and lowering the head, blade lubrication system, 2” square tubing frame with
large structural gussets, dual measuring system 4, 5, 6, 8, quarter scale and standard 1”
scale. This mill also has a durable powder
coat finish.
OSCAR 52 & 60 PORTABLE SAWMILLS
Standard features for the Oscar 52
sawmill include a 52" log capacity, gas or
diesel engines available in a variety of
horse power, electric start, 1.5” band
wheel bearings, 25 inch band wheels, 12
V winch power head adjustment system,
dual measuring system with quarter scale
and standard inches or metric, blade lubrication system, extra heavy duty carriage head, four post system with 2”
square tube, 5.5” Centrifugal dual belt
drive clutch and drive pulley, powder
coat finish and Hud-Son bandblades.
Standard with Carter blade guides. Available track options: 7’ sections of 3”x3”
angle iron track with log dog or one piece
3”x6” box beam heavy duty ground track:
16’, 20’ or 24’ sections available. with 3
adjustable log dogs.
15
TIME SAVING ACCESSORIES
SAWMILL OPTIONS & ACCESSORIES
16
Speed Control
Log Ramps (for trailer units)
Cable Log Loader & Turner Includes
2500 pound winch and 2 ramps
HUD-SON CHAINSAW LOG DEBARKER
Turn your chain saw into a debarker,
notcher or planer! Easily mounts on any
saw bar. Uses .325 or 3/8” pitch chain to
drive the drum that has two 3 1/4” planer
blades. Use to debark and notch logs. You
can make notches or debark poles for
barns, fences, bridges, landscaping, log
home construction and more! Save time
& money, the uses for this great tool are
endless. Features all ball-bearing construction for long life and durability.
Power Feed - Fits almost any brand mill Comes with universal spline/sprocket system, which accommodates all pitches
with a charging system & battery. Has for- of saw chain and two blades are on unit. Made in China. #DB-1 Free Shipping
ward & reverse adjustable speed control. with MC - VISA - Discover Credit cards within the continental US.
BAND BLADE SHARPENER SEMI AUTOMATIC
Features include gullet depth adjustment, adjustable tooth profile,
adjustable speed control, sealed
bearing roller guides, blade support
arms, vise mounting (vise not included) and a shut off timer. Note:
Keeping your blades in top condition enhances bandmill efficiency,
reducing operating costs.
LARGER LUBE TANK
Now Available to
you is a new water
lube tank for the
330 and 236 model
sawmills. This new
tank can hold up to
5.5 gallons of fluid
and there is a on/off
valve for your convenience.
Cant Hooks &
Peaveys
Cant Hook:
CH173 - 3-1/2’
Round Handled
Cant Hook
CH174 - 4’
Round Handled
Cant Hook
CH175 - 4-1/2’
Round Handled
Cant Hook
Our Cant Hooks
are heavy-duty and come
LOW TONE
with 2 1/2’ - 5’ handles. Moves logs or big
MUFFLER
cants.
Peavey:
PV121 - 3-1/2’ Handle, PV Complete
PV122 - 4’ Handle PV Complete
PV123 - 4-1/2’ Handle, PV Complete
A PV is a cant hook but with pointed
For sawmill models with 16, 21, end, 2’ - 5’ handles available. Made in
and 23 HP motors a low tone muf- the U.S.A.
fler upgrade is available.
The Boardmaster can size down a large log
to fit on a small mill. The ideal chain saw
accessory! Cut your own valuable lumber
for use in hundreds of worthwhile projects,
at a fraction of its value. Turns your chain
saw into a portable sawmill & accurate cutting tool. Attaches to your chain saw and
guides it along a guide board nailed onto a
log to produce low cost lumber of any size
or thickness. Attaches to most any model
chainsaw and comes complete ready to
use, with instructions. Chain saws & other
brands of attachments available. Bar
drilling required.
PV685 - 16” Log small logs. Complete with 30’’ hickory
Tongs handle. Special forged steel style.
Log
PV687- 20’’ Log Made in the U.S.A.
Tongs
Tongs
PV687-25 25’’
Log Tongs
PV689- 32’’ Log Tongs
Replacement handles for tools: Be
sure to tell us if your tool is blue or
black in color, since the replacement handle dimensions vary in
TIMBER
JACK:
size.
PV275 - This two-in-one tool efTimber Carrier ficiently raises the log off the ground
for easy cutting. Many chain saw
chains are dulled and even ruined
when the operator tries to cut the log
when it’s lying on the ground. The
Timberjack also becomes a Cant Hook
when the stand is removed ... making
it easier to move or turn logs for cutting. 3 1/2’ handle. Made in the
U.S.A.
Timber Jack
“CAGE FRAME” CABLE
STYLE LOG TURNER
The Hud-son Cable Log Turner is a great
addition to your mill to help turn those
large hard to move logs or cants. The
Turner easily rolls on your track or trailer.
This allows you to center the turn on the
log. Then the Turner can then be rolled
out of the way without lifting. The
2000lb winch is located off to the side of
the frame at a good working height.
Cable is brought through an adjustable
top pulley allowing the user to match different size logs and cants. Another nice
use of the Turner is that it can be used
with irregular logs to lift one end if toeboarding is needed. If you are looking to
get the job done and take the back
wrench log handling out of it, the Cable
Log Turner accessory can help you.
TIMBER CARRIER:
PV422 This husky log carrier is
handy in a lot of woodsman situations, from log home building to firewood cutting. Comes with a 2 1/2”
diameter x 4 1/2’ long premium
quality handle. Handles logs from 3’’
to 16’’ in diameter.
MORE POWER PULLER - extra heavy duty
PARTS FOR 2-TON MODELS
P-7: Tubular safety handle 18” long w/red
TIME SAVING ACCESSORIES
LOG HOOKEROON: PV644 TONG: 30” Perfect for moving firewood or
BOARDMASTER
grip
P-11: Spring for pawl on yoke or frame
2-20: 2 ton 20’ cable • 2-
P-6-20: 20’ of cable
30: 2 ton 30’ cable
P-6-30: 30’ of cable
2-35: 2 ton 35’ cable • 3-
P-6-35: 35’ of cable
20: 3 ton 20’ cable
17
HUD-SON IS THE RIGHT CHOICE
WE CUT WOOD NOT CORNERS
1. DESIGN - Hud-Son uses a 4-Post head design, which allows for more head stability & reduces
the chance for “sag” or “uneven” cuts. With an inner H-frame bearing support system, this applies
less stress on the bearings & drive shafts. The H-frame uses no “camber” in the wheels for tracking.
Camber causes unnecessary stress, which leads to early bearing & shaft fatigue.
2. SERVICE - When needed, it’s simple. Easy access to all the bearings, shafts and belts makes adjustments and service simple. Blade changes are easy, no realigning or adjustments to make.
3. BLADE GUIDES - Hud-Son uses our very own guides. With support on the top, bottom and back
of the blades, where can it go? Our guides limit the chance of blade wander. The lower support
holds the blade up and decreases the chance of “diving,” while most companies use only top support. Yes, we do sell our guides separately.
4. VALUE - Compare, there is no other mill on the market that has standard features for the price
of a Hud-Son. NO ONE!
5. POWDER COATED, BAKED ON PAINT - We care that you are completely satisfied with your recent
purchase. We powder coat all our sawmills. Powder coating is durable, just like your HUD-SON! Each
part is carefully prepared and coated to keep your investment looking like new for years to come.
6. QUALITY ASSURED - Every single unit passes a vigorous 28-point inspection. Each sawmill is
tested with wood, not just visually looked at. It is not easy to earn the right to wear the HUD-SON
label.
7. AVAILABILITY - Our sawmills are available at more than 50 locations throughout the U.S., Canada,
New Zealand and Europe. This brings service and availability closer to you.
8. WARRANTY - All standard mills have 2 -year limited warranties. We stand behind our products. We
do not hide behind the small print. HUD-SON offers a 6-year shaft and bearing warranty. Warranty
varies on commercially used products. EXTENDED WARRANTY OFFERED ON SOME MODELS.
9. WHEEL BELTS - All our bandwheels, from 16” - 30” in size, have tight fitting grooved urethane belting.
This completes the match and balance with the wheel, belt, bearings and shafts. This removes the vibration
mills with “loose belts” have and improves the quality of your cut.
10. PORTABILITY - All HUD-SON mills are portable. Some can be moved with a 4-wheeler, some with
a pick-up truck, some are light enough a man and a woman can move it. HUD-SON designs our mills
with customer convenience in mind. At HUD-SON we know that portability, quality and value are as
important to you as they are to us!
18
20
Hud-Son
Log Capacity Standard Engine
Portable
(Diameter)
Power
Sawmill Model
Manual
Electric Start
Ground
Track
Trailer
Model
Weight
Complete Unit
HFE-21
21” Log
6.5 hp
5 hp electric opt
Manual
12’- 2 Piece
N/A
500 lbs
HFE-30
30” Log
13hp std
Manual
14’- 2 Piece
Optional 20’, 24’
28’
750 lbs
HFE-36
36” Log
16hp
Electric
14’- 2 Piece
Optional 20’, 24’
28’
750 lbs
Oscar 121
21” Log
10 hp
Manual
12’- 2 Piece
Optional 12’
500 lbs
Oscar 328
28” Log
10 hp std.
5 hp electric opt
Manual
12’- 2 Piece
Optional 20’
600 lbs
Oscar 330 Pro
30” Log
16 hp std
23 hp opt
Electric
14’ 2 Piece
Optional 20’, 24’
28’
850 lbs
Oscar 236
36” Log
16 hp std
23 hp opt
Electric
14’ 2 Piece
Optional 20’, 24’
28’
950 lbs
Oscar 436 Pro
36” Log
28 hp
Electric
14’ 2 Piece
Optional 20’, 24’
28’
1200 lbs
Oscar 536 Pro
36” Log
35 HP Gas
Optional Diesel
On 636
Electric
14’ 2 Piece
Optional 20’, 24’
28’
1400 lbs
Farmboss
36” Log
16 hp std
23 hp opt
34 hp opt. diesel
Electric
Optional
20’, 24’, 28’
2200 lbs
H360
36” Log
23 hp - std
35 hp opt.
Electric
N/A
24’
2800 lbs
52” Log
23 hp std
31 hp opt.
34 hp opt. diesel
Electric
7’ sections optional 16,
20 or 24
heavy duty
optional
Head Only 1200
lbs
Oscar 52
SAWMILL COMPARISON CHART
VIEW VIDEOS AT WWW.HUD-SON.COM
Our staff is courteous & knowledgeable and will be happy to build a mill to meet your speciality needs. HudSon will also be there after the sale. If for any reason you are not satisfied with our quality, service or sales,
please call our Barneveld, NY Headquarters at 800-765-SAWS and will will be happy to assist you in any way
possible.
19
HUD-SON EDGER 1913
The Hud-Son Edger 1913 is a great piece of equipment to help any sawmill owner be more profitable while saving valuable time. Anyone that has added an edger to their sawmill operation
has reported an increase of production from 30 to 50%.
You do not have to rehandle boards. There is no wasting valuable time setting them back up
on the sawmill. There is no wasting good lumber that could be saved with the use of an edger.
Each boards is edged separately to get the maximum board footage per piece. All this adds up
to more profit in your pocket.
The Hud-Son model 1913 Edger features a 13 hp engine, two thin kerf carbide tipped split saw
blades, one stationary and one movable, a two speed machine feed roller system accompanied
by a spring tension system that prevents your boards from slipping during operation.
A spring loaded, lock in position spin wheel sets the movable saw blade for precise board widths.
The edger is equipped with standard anti kick back fingers, and a flip down fence for boards
that only need edging on one side.
Your safety is top priority with the under saw safety guard.
A reinforced top guard allows for over the top return for quick re-edging, quick and ease of removal of guards for lubrication and speed set change. The top guard can also flip up for quick
and easy blade change.
It cuts up to 2 ¼” thick and can edge a rough fletch up to 23” wide and can produce a finished
cut board 19” wide.
The overall length is 15’ with a 96” in-feed table and a 79” out-feed table and weighs 450 lbs.
The standard package comes stationary but a trailer package is available for easy portability.
HUD-SON 1913 EDGER
Trailer option available
CALL FOR CURRENT PRICING
20
The original Hud-son Fire-
bundler effectively bundles I storage.
wood Bundler, comes stan- cube (12" x 12") of firewood.
Our newest addition to the
dard with wheels to make it Ideal for camp stores, roadside
Hud-Son
easier for moving around the bundled wood sales. Increase
Bundler family is our mid-size
Forest
Firewood
worksite and for storage. It your dollars per cord by selling bundler. It has a 9”x9” cradle,
bundles
firewood
from
bundled firewood.
12”-20” long wood capability.
lengths of 14” to 24” up to
Simple foot pedal operation
It measures 41” wide, 33”
12”x 12” square. Firewood is
make bundling easy and fast.
deep, 38” tall and weighs 75
wrapped using a standard size
Comes standard with wheel lbs, it takes an 8” wrap and has
11” wrap available at many re- kit for easy portability and a 1 to 1 ratio on the crank.
tail stores and of course Hudson.
Hud-son’s bundler is simple
to use. Firewood is loaded into
the tray, once you have your
desired amount, it is ready to
be wrapped. Wrapping begins
by placing the wrap over the
bundle then turning the hand
crank to start wrapping. Once
completed cut the wrap and
Mini Wood Bundler
remove the firewood bundle
Original
Wood Bundler
now ready to be sold. Has a
working height of 36” and has
Electric
Firewood Bundler
1” pillow block bearings.
We have added a new style
bundler to our line of wrappers. This hitch mounted mini
firewood wrapper is perfect
for ATV's. You can now bundle
wood right where you cut it. 9
HUD-SON FIREWOOD BUNDLERS
HUD-SON FIREWOOD BUNDLERS
inch square bundles of wood,
mounted to a 2 inch receiver
hitch , wraps lengths of 13-18
inches.
Our
Electric
firewood
Mid Sized
Firewood Bundler
21
WOLVERINE M FIREWOOD PROCESSOR
22
MODEL # WOLVERINE M-10-16 - Standard Features Include: 10 HP engine, 4 way slip on wedge,
16 gpm 2 stage hyd. pump, 11 second cycle time, 4" x 24" cylinder, unlimited log length can be
fed, will take up to 18" diameter log, and a variable speed winch.
The Wolverine M firewood processor is designed with the homeowner, farmer and small wood
businesses in mind. This unit is extremely portable, can be moved into small or remote areas
with the use of an ATV.
With a 10 HP engine running a 2 stage hydraulic pump the splitter is powerful and fast. The
powerful splitter comes standard with 2 and 4 way wedge and splits up to 24” length.
The cutting of wood to a desired length is simple, with the use of your personal chainsaw, you
are in control of the length and speed of the cut.
The Wolverine has a hydraulic winch that pulls your log of any length into the machine with the
maximum diameter of 18”. You can easily set this machine up in minutes so moving to another
location can be achieved quickly and easily.
The amazingly affordable Wolverine M will get your wood done in a hurry without the back
wrenching work.
WOLVERINE M
FIREWOOD
PROCESSOR
WOLVERINE A
FIREWOOD
PROCESSOR
WOLVERINE A FIREWOOD PROCESSOR
MODEL # WOLVERINE A-14-22 - Standard features include: 14 HP single cylinder Robin Subaru
electric start engine, 4 way slip on wedge, 22 gpm 2 stage hyd. pump, 7 second cycle time, and
a log clamp. 4" x 24" cylinder, unlimited log length can be fed, will take up to 18" diameter log,
variable speed winch, an automatic bar oil system and a self powered chainsaw bar.
The Wolverine A has all the features of the Wolverine M plus it has a built in chainsaw, more
powerful motor, and larger pump.
23
BADGER FIREWOOD PROCESSOR
BADGER FIREWOOD PROCESSOR - Standard Features Include: 16 HP Briggs & Stratton V twin
engine w/ electric start , 4-way adjustable wedge, 22 gallon per minute hydraulic pump, 4”x24”
cylinder, 2 stage pump, 7 second cycle time, 2” ball coupler, will cut and split up to 1 full cord of
wood per hour - up to 18” diameter wood with a common 3/8 saw chain, 19 ton splitting force,
log cable fed with hydraulic winch, unlimited log length can be fed, Blocks up to 24” long, Weight:
2250 pounds, automatic oiler, powerful enough to pull a full length tree, Highway towable up
to 45 MPH, and a built in hydraulic pressure gauge & hour meter.
BADGER
FIREWOOD PROCESSOR
An optional Badger firewood processor
conveyor is available 10’ long, 12” wide cleated belt.
SHOWN WITH
CONVEYOR OPTION
CALL FOR CURRENT PRICING • SHIPPING FOB BARNEVELD • NY
24
Options include: 31 HP Briggs and Stratton engine, hydraulic four-way wedge, hydraulic or manual 6 way wedge, and a hydraulic 2 strand live deck.
LITTLE BRUTE
FIREWOOD PROCESSOR
LITTLE BRUTE FIREWOOD PROCESSOR
Standard features include a 23 HP Briggs & Stratton Engine w/electric start, hydraulic log loader,
hydraulic log feed, hydraulic log clamp, hydraulic saw, 18” diameter log capacity, 24” splitter
w/auto cycle, 19 ton splitting force, 7 second cycle time, adjustable 4-way wedge (manual), dual
hydraulic pump, 15 gallon hydraulic tank, 2” trailer hitch, torsion axle, highway towable up to
45 MPH, built in hydraulic pressure gauge & hour meter, and an automatic bar oiler.
The Hud-Son Little Brute Firewood Processors use separate hydraulic pumps to power hydraulic
saw, hydraulic feed, splitter and loader. You can do more motion at the same time. Cut or split
and load a log or feed a log at the same time!
25
BRUTE D FIREWOOD PROCESSOR
26
Standard features include 51 HP diesel engine, 2 strand live deck, hydraulic 2 or 4 way wedge,
5.5 second splitter cycle time, 10 foot chain drive in feed conveyor, hydraulic clamp, hydraulic
3/8” chain saw bar, 18” diameter log capacity, 24” splitter w/auto cycle, 30 ton splitting force,
4” x 24” cylinder, 27 GPM and 8 GPM pumps, optional 6 way wedge, built in hydraulic pressure
gauge & hour meter, and an automatic oiler.
BRUTE - D - For the more serious we offer the Brute-D complemented with a 51 HP engine. The
Brute-D includes most of the Little Brute options as standard features. 2 strand hydraulic live
deck and hydraulic 4-way wedge standard. With the increased engine and pump size the splitter
cycle time is increased to an amazing 5.5 seconds. With power and speed the Brute-D will get
the job done ahead of schedule.
BRUTE D
FIREWOOD
PROCESSOR
HUD-SON WOOD SPLITTERS
MANUAL START
9 HP Robins Subaru
13 GPM pump
13 second cycle time
RPM Meter
Hour Meter
Tank size 5 gallon
4-way Wedge
2” Hitch
Frame Bridge Frame
24” x 4” x 2” Cylinder
H D H - 2
MANUAL START
10 HP Briggs & Stratton
16 GPM pump
9 second cycle time
RPM Meter
Hour Meter
Tank size 15 gallon
4-way Wedge
2” Hitch
Frame Bridge Frame
24” x 4” x 2” Cylinder
MODEL SHOWN IS THE HDH-3 WITH OPTIONAL LOADER
Length - 10’ 4” includes removable tongue,
8’ 6” without tongue - Width - 37”, optional log lift
available for each model.
H D H - 3
ELECTRIC START
14 HP Single Cylinder
Robins Subaru
22 GPM pump
9 second cycle time
RPM Meter Hour Meter
Tank size 15 gallon
4-way Wedge
2” Hitch
Frame Bridge Frame
24” x 4” x 2” Cylinder
HDH LOG
LOADER
VERTICAL/HORIZONTAL
Model #LJHV
The LJHV is a compact splitter offering many user friendly features. It is a horizontal-vertical splitter with the following specifications: 6.5 HP Briggs & Stratton engine, 24 ton split, 24” Splitter,
10-second cycle time, road tires and a 2” ball receiver and is towable.
HUD-SON WOOD SPLITTERS
H D H - 1
Call For Current Prices
Shipping FOB Barneveld New York
BUILT TOUGH
ALL UNITS ARE TOWABLE
27
CONVEYORS BY HUD-SON
CONVEYORS BY HUD-SON
#C12C -The Hud-Son 12’ single chain conveyor comes with a 3.5 Briggs engine and can
easily fit in to the back of truck. It is a great
tool to take the back-breaking work out of
loading a truck or utility tractor. Whether you
are only moving wood a short distance of piling firewood in the backyard, the Hud-Son 12’
conveyor does it for you.
#C16C - The Hud-Son 16’ single chain conveyor comes fully portable and can be towed
behind a truck or tractor. It can elevate to a
height of 8 ft. and is powered by a Briggs and
Stratton 3.5 HP gear reduction engine.
#C32B - The Hud-Son 32’ conveyor can reach
a height to 14'. It offers again the wide feed
trough and excellent height for loading a
commercial truck or trailer.
C20BHD - 20' Mulch Conveyor - this high
speed mulch conveyor can handle mulch/dirt
loads at an incredible rate of 5 feet per second. Features a 30" wide belting and 72" by
44" hopper tray. Ample powered with 5.5 HP
Honda motor. Works well with tub grinders,
chippers, and screeners. Other Sizes Available.
#C20C - The Hud-Son 20’ single chain conveyor also comes towable and can reach a
height of 11 ‘, and is powered by a 3.5 HP
Briggs and Stratton engine. Hooks up nicely
to light duty or commercial splitter.
#C12B The Hud-Son 12’ could be the perfect
size to load your pick up or utility trailer. Has
a fixed height of 6 feet.
#C16B - The Hud-Son 16’ belt conveyor
comes fully portable and can be towed behind a truck or tractor. It can elevate to a
height of more than 9 ft. and is powered by a
Briggs and Stratton 3.5 HP gear reduction engine.
#C20B The Hud-Son 20’ belt conveyor system
is the next step in saving time and energy. It
is wider allowing more split firewood to travel
up at once. It comes with a 3.5 Briggs and
Stratton engine and can reach a height to 11’.
Its is also road towable and built to last.
#C24B - The Hud-Son 24’ conveyor can
reach a height to 12'6". It offers again the
wide feed trough and excellent height for
loading a commercial truck or trailer.
REMOVABLE HITCH • HIGHWAY TOWABLE
28
These conveyors are constructed on
a heavy steel frame and are perfect
for firewood, mulch, hay, glass, recycled materials and more. All Hud-Son
tained units or hydraulic remotes.
Each belt model has a 36” hopper
tray for easy loading.
CALL FOR CURRENT PRICING - SHIPPING FOB BARNEVELD • NY
Model
Type
Belt/Chain
Frame
Motor
Drive System
Opt. Hyd.
Drive
Slide Rails
Max
Height
* not
recommended for
use w/processor
* * recommended
for use w/processor
#C12C
Chain
3” Channel
3.5 Briggs
or Hyd
V-Belt
Yes
Channel
6’ Fixed
*
#C16C
Chain
3” Channel
3.5 Briggs
or Hyd
V-Belt
Yes
Channel
9’6”
*
#C20C
Chain
3” Channel
3.5 Briggs
or Hyd
V-Belt
Yes
Channel
11’
*
#C12B
Belt
2x4 Tube
3.5 Briggs
or Hyd
V-Belt
Yes
Hardwood
6’ Fixed
**
#C16B
Belt
2x4 Tube
3.5 Briggs
or Hyd
V-Belt
Yes
Hardwood
9’6”
**
#C20B
Belt
2x4 Tube
3.5 Briggs
or Hyd
V-Belt
Yes
Hardwood
11’
**
#C24B
Belt
2x4 Tube
3.5 Briggs
or Hyd
V-Belt
Yes
Hardwood
12’6”
**
#C32B
Belt
2x4 Tube
3.5 Briggs
or Hyd
V-Belt
Yes
Hardwood
14’
**
CONVEYORS BY HUD-SON
conveyors are available as self-con-
29
UNIFOREST LOG SKIDDING WINCHES
30
Skidding winches have become increasingly popular over time largely due to the needs for
low impact logging and effective time management. Many other applications like vehicle recovery, steel scrapping, and emergency winching have become common uses of the Uniforest
winches.
Uniforest Skidding winches have become a new standard for quality and innovation. These
winches are well thought out with the operator in mind. Featuring wireless control models,
extra length cable, lower snatch blocks, removable trailer hitch, full protective screen, and
even a place to put your chainsaw. With over 20 years proving their worth in the field these
winches are tried and true.
Turn your tractor into a skidder using a Uniforest Skidding Winch. Pulling power of up to
18,100lbs. Affordable manual control (E) and efficient wireless control models (H) available.
Call us today and learn which model would be the best fit for you and your tractor from 16hp
to 100+ hp tractors. Whether you are a novice or commercial forester, Uniforest has a skidding
winch to fit your needs.
UNIFOREST LOG
SKIDDING WINCHES
Wireless Remote
UNIFOREST
REPLACEMENT WINCHES
Replacement
Log
Skidder
Winches! Single Drum or Double
Drum options. Replace that old
worn out winch with a single
drum 8.5 ton or even a double
drum unit with two 8.5 ton units.
We can also make them radio
controlled to save even more
time and money in the woods.
Model
35E
40E
45M
45H
Tractive force
7700
Lower cable
lbs
position
8800
lbs
9900
lbs
9900 11,000 12,100 12,100 13,200 13,200 14,300 14,300 17,600 18,700 18,700
lbs
lbs
lbs
lbs
lbs
lbs
lbs
lbs
lbs
lbs
lbs
Power Required HP
50E
55M
55H
60E
60EH
65M
65H
16-45 30-54 30-60 30-60 45-70 45-80 45-80 55-90 55-90 55 - 90 55 - 90
Wireless Remote
No
Standard
Cable
230’x
3/8
No
No
Yes
230’x 230’ 230’
7/16 x7/16 x7/16
No
No
Yes
230’
x1/2
230’x
7/16
230’x
7/16
No
Yes
No
Yes
80EH
85M
85H
70+
70+
70+
Yes
No
Yes
260’x 220’ x 220’ x 220’ x 295’ x 295’ x 295’ x
1/2
1/2
1/2
1/2
9/16 9/16 9/16
Middle Speed
3
3
3
2
3
3
2
2
2
2
2
2
2
2
of
ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec ft/sec
cable ft/sec
540
lbs
657
lbs
767
lbs
840
lbs
745
lbs
855
lbs
870
lbs
1075
lbs
1150
lbs
1159
lbs
1232
lbs
1240
lbs
1241
lbs
1312
lbs
Blade Width
3.9 ft
ft
4.6 ft
4.6 ft
4.6 ft
4.9 ft
5.2 ft
5.2 ft
5.2 ft
5.2 ft
5.5 ft
5.5 ft
5.9 ft
5.9 ft
5.9 ft
Front to Back 1.5 ft
1.6 ft
1.6 ft
1.6 ft
1.6 ft
1.6 ft
1.6 ft
2.5 ft
2.5 ft
2.5 ft
2.5 ft
2.5 ft
2.5 ft
2.5 ft
Winch Height 3.8 ft
4.3 ft
4.4 ft
4.4 ft
4.7 ft
4.7 ft
4.7 ft
5.4 ft
5.4 ft
5.4 ft
5.4 ft
5.4 ft
5.4 ft
5.4 ft
Weight
Overall
Height
6.6 ft
6.6 ft
6.6 ft
6.6 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
7.5 ft
Category
1
1&2
1&2
1&2
1&2
1&2
1&2
2&3
2&3
2&3
2&3
2&3
2&3
2&3
UNIFOREST LOG SKIDDING WINCHES
TECHNICAL DATA
31
GRAPPLES FOR LOG & TREE HANDLING
TONGS, GRAPPLES AND GRABS
32
TONG S/GRA PPLES
1100
1300
1800
Max Opening Expanse
42”
51”
70 3/4”
Min Opening Expanse
2”
Technical Data:
Weight
2 3/4” 2 3/4”
167 lbs 207 lbs 410 lbs
Length Closed
25”
Width
27 1/2” 39 1/4”
12 1/2” 12 7/8” 14 1/2”
Height Closed
17”
18”
22”
HYDRAULIC ROTATOR
WWW.HUD-SON.COM
Model
Rotator
Weight
1100
GR-30
36 lbs
1300
GR 30
40 lbs
1800
GR 465
63 lbs
UNIFOREST SCORPION GRAB
Uniforest Scorpion has been universally designed to work with both 3pt hitch set ups or universal
quick connects. Mount the Scorpion Grab on the front of your skid steer and tractor or the back
using a 3pt hitch. The Scorpion is complete with boom, rotator, and grapple. Move your logs,
brush, or other grapple needs with ease. Available in 1300SB (51”) and 1800SB (70 3/4”).
The Hud-Son Lift Arm, is perfect for
those heavy lifting jobs under 1200 lbs.
The Hud-Son Lift Arm comes with a lift
hook, and a hydraulic 1200 lb jack. An
optional hand winch or 12 volt electric
winch to drag logs or many other items
into reach of the lift can easily be added.
It fits any Class III 10,000 lb receiver, for
those wanting to bolt it down to a trailer
or other item. It also has a pre drilled
flat plate. There is a two hole extendable
boom for logs up to 14 foot long.
The Hud-Son Lifting Arm comes standard with 1200 max lift, estimated
weight of 375 lbs. hand winch: 1200 lbs,
12 volt winch: 1200 lbs, a 360 degree
swing, maximum reach is 7 ‘ 6”, standard 3 adjustable jacks are standard.
TOP SOIL SCREENER - ROAD TOWABLE
• 5.5hp Honda engine
with gear reductions
transfer system
• Standard 5/8" screen
8' long by 4' wide
(optional screen
sizes available)
• Stone and sod
separator 2" spacing
between 2" tubing
• Max height (max
loading height) of
separator is 7'4"
• 2" hitch w/ Torsion
axle
• 1850 lbs
The Hud-Son 8M dirt screener was built with
the landscaper and contractor in mind. It
works equally well with a skid steer or front
end loader. The upper separator will remove
any oversized material and debris making the
next stage faster and easier. The second stage
is a heavy duty 8 ft. by 4 ft. woven screen that
will do the final separation and leave you with
a finished product ready to spread or load.
You will find the 8M to be easily towable to any
job site. With a loading width of 8 ft. it will easily handle a one yard bucket. Another convenient feature of the 8M is that the operator can
keep the upper separator clear from debris
with out leaving their skid steer or front end
loader. Saving you time and money. You will
find the 8M to be a reasonably priced machine
ready to handle most needs without a problem. With many different size screens you will
see that this machine can be used for many different applications.
LIFT ARM & TOPSOIL SCREENER
HUD-SON LIFTING ARM
33
STAKE SHARPENERS & LOG SKIDDING ARCH
SHARPENERS AND LOGGING ARCHES
STAKE
SHARPENER
An innovative tool that can
sharpen stakes, make survey
stakes, tomato stakes and
more as fast as you can feed
them! • 1.5” or 2.5” models
available in gas or electric.
HUD-SON STAKE SHARPENER COMPLETE UNIT
1.5” Hub Capacity
6.5 hp (gas)
1 hp (electric)
2.5” Hub Capacity
3 hp (electric)
10 hp (gas)
TENON HEAD AVAILABLE
AIR POWERED STAKE POINTER
The Air powered stake pointer should be operated with guards on at
all times. The machine requires a minimum of 90 psi and 52 cfm. The
operator controls operate off standard electric. Turn a profit one stake
at a time with the Hud-Son air powered stake pointer. Production rates
of 8 stakes per minute up to 24 stakes per minute. The operator is protected by guarding and a two hand operation switch. Speed is enhanced by the hands free holder.
WE LET YOU GET INTO REMOTE AREAS THAT OTHERWISE YOU COULD NOT
FOREST
FRIENDLY
ATV
ATV-ARCH -A • Adjustable Skidding Arch • 2000 lbs winch
• Safety Chain • 10” Tires • Arch is adjustable for
different log lengths. Allows most logs to be completely off
the ground. • Fully Assembled
Turn your 4 wheeler into a log skidder!
ATV-ARCH -S
• 2” hitch • 8” Standard
Tires
• Comes with 1000 lb
winch to lift logs & chain
to hold log
• Comes unassembled
• Shipped UPS
VISIT US ON THE WEB AT WWW.HUD-SON.COM
34
35
The red dots indicate states with at least
one Hud-Son dealer.
Nigeria
New Zealand
United Kingdom
Guatemala
CANADA
Nova Scotia
Newfoundland
Ontario
Quebec
New Brunswick
Hud-Son has a large dealer network here in the states and overseas. Please visit our website at www.hud-son.com or
call our office at 800-765.SAWS for the dealer nearest you or if you would like to join our team of dealers.
HI
DE
MD
NJ
RI
MA
Other Hud-Son dealer
locations include:
WANTED! A FEW MORE GREAT DEALERS NEEDED! CALL 800-765-SAWS.
HUD-SON
FOREST EQUIPMENT
FOR THE WORK YOU DO.
For the work you do.
8 0 0 . 765. SAWS • W W W. H U D -SO N . C O M
The Uniforest
Scorpion Grab
See Page 32
For Details.
The Hud-Son Forest team is courteous, knowledgeable and is always happy to assist you
with all of your forestry needs, and your never know you might see our truck traveling
through a town near you.
800.765.SAWS • WWW.HUD-SON.COM • INFO@HUD-SON.COM