Full Catalogue - Adhesive Dispensing Ltd

Transcription

Adhesive
Dispensing Ltd
2013 Catalogue
Small shot fluid dispensing systems
Precision dispensing systems, components and consumables, metering valves,
bench top robots, fume extraction, accessories and adhesives.
Solutions customers stick with ...
1
Manual hand plunger dispensers
Manual Techcon cartridge guns
Pneumatic Techcon cartridge guns
ADL reusable hand plungers for small shot low
volume dispensing of gels, pastes, glues and
other fluids. Supplied with syringe barrel, piston,
tip and cap seal or with full component kits.
Techcon manual hand operated cartridge guns
for pastes, gels, RTVs, grease, silicone and solder
paste. Aluminium bayonet retainers. Compatible
with all Techcon and Semco cartridge tubes.
Techcon pneumatic hand operated cartridge gun
dispensers for pastes, gels, RTVs, grease, silicone
and solder paste. Aluminium bayonet retainers. All
sizes are interchangeable. For use with Semco and
Techcon cartridge tubes.
Part Code
TS703HP
TS705HP
TS710HP
TS730HP
TS703HP-KIT
TS705HP-KIT
TS710HP-KIT
TS730HP-KIT
Part Code
TS16-25
TS16-60
TS16-80
TS16-120
Size
3cc
5cc
10cc
30cc
3cc
5cc
10cc
30cc
Size
2.5oz
6oz
8oz
12oz
Part Code
TS950-25-HA
TS950-60-HA
TS950-80-HA
TS950-120-HA
Size
2.5oz
6oz
8oz
12oz
Manual Semco cartridge guns
Semco manual hand operated cartridge guns for
pastes, gels, RTVs, grease, silicone and solder
paste. Metal threaded retainers. Compatible with
all Semco and Techcon cartridge tubes.
Manual syringe gun dispensers
ADL manual hand operated syringe gun
and solder paste. Easy barrel attachment, trigger
leverage for dots or beads of materials. Supplied
with syringe barrel, piston, tip and cap seal or
with full component kits.
Part Code
TS710SG
TS730SG
TS755SG
TS710SG-KIT
TS730SG-KIT
TS755SG-KIT
Part Code
221824
221830
221832
230273
221836
230274
234054
Size
2.5oz
6oz
8oz
10oz
12oz
20oz
32oz
Size
10cc
30cc
55cc
10cc
30cc
55cc
Pneumatic Semco cartridge guns
Semco 250-A pneumatic hand operated cartridge
gun dispensers for pastes, gels, RTVs, grease,
silicone and solder paste. Aluminium bayonet
retainers. All sizes are interchangeable. For use
with Semco and Techcon cartridge tubes.
Part Code
250255
250065
250085
250125
Size
2.5oz
6oz
8oz
12oz
Pneumatic ADL cartridge guns
Manual ADL cartridge guns
ADL manual hand operated cartridge guns for
pastes, gels, RTVs, grease, silicone and solder paste.
Metal threaded retainers. Retainers are
interchangeable. Compatible with all Semco and
Techcon cartridges as well as 310ml (1/10 gallon)
sealant silicone tubes. ADL Series guns.
Part Code
AD16-25
AD16-60
AD16-80
AD16-110
AD16-120
Size
2.5oz
6oz
8oz
10oz
12oz
ADL pneumatic hand operated cartridge gun
and solder paste. Metal threaded retainers. All
sizes are interchangeable. For use with Semco and
Techcon cartridges as well as 310ml (1/10 gallon)
sealant tubes. Features an adjustable air regulator
on back of the handle.
Part Code
100A-25
100A-60
100A-80
100A-10
100A-120
Size
2.5oz
6oz
8oz
10oz
12oz
Pneumatic Semco cartridge guns
Semco 250-B pneumatic hand operated cartridge
gun dispensers for pastes, gels, RTVs, grease,
silicone and solder paste. Aluminium bayonet
retainers. All sizes are interchangeable. For use
with Semco and Techcon cartridge tubes. These
guns have no handle and use a lever to operate.
Part Code
250250B
250060B
250080B
250120B
Size
2.5oz
6oz
8oz
12oz
2
Pneumatic large size cartridge guns
Manual dual cartridge guns
Pneumatic footvalve dispensers
Semco pneumatic hand operated cartridge gun
and solder paste. Metal threaded retainers. For
use with Semco and Techcon cartridges. 550
Series. Large capacity lightweight applicators.
ADL series manual hand guns for dual component
cartridges. Easy load of the cartridge with lever to
pull back plunger. Lightweight yet robust hand
guns.
Foot operated non-timed pneumatic dispenser
with adjustable 0-100 psi regulator and gauge.
For deposits of pastes, gels, adhesives, silicones,
solder pastes, etc. Standard unit or version with
vacuum suckback for stringy glues. Supplied with
30cc syringe kit and dispensing tip selection.
Part Code
231218
233688
Part Code
MG200-1
BG200-1
BG300-1
BG300-10
BG380-1
BG400-1
BG3600-1
Size
20oz size
32oz size
Ratio
1:1/2:1
1:1/2:1/4:1/10:1
1:1/2:1
10:1
4:1/10:1 Coaxial
1:1/2:1/4:1/10:1
1:1/2:1
Size
200ml
200ml
300ml
300ml
380ml
400ml
600ml
Part Code
TS924
TS924V
Type
Standard unit
With vacuum
Pneumatic sealant tube guns
ADL pneumatic hand operated cartridge gun
dispensers for silicones, RTVs and sealants.
Aluminium & plastic threaded retainers. For use
with 1/10 gallon size (310ml) sealant tubes.
Pneumatic only benchtop dispenser
Pneumatic 50ml dual guns
Part Code
C-110CXO
Price
310ml size
ADL series pneumatic hand guns for dual
component cartridges. Easy load of the cartridge
with adjustable regulators. Lightweight yet robust
hand guns for industry standard cartridges.
Part Code
ADCBA-25D
EDS408M
Ratio
1:1
1:1/2:1/4:1/10:1
Size
50ml
50ml
A non-timed pneumatic dispenser with adjustable
0-100 psi regulator, gauge and vacuum suck-back.
For deposits of watery liquids to thick pastes.
Supplied with 30cc syringe kit and selection of
dispensing tips.
Part Code
VSE215A-II-CE
VSE215A-I-CE
Type
220V version
110V version
Manual 50ml dual cartridge guns
ABM series manual hand guns for dual
with lever to pull back plunger. Lightweight yet
robust hand guns. 50ml/ 75ml type cartridges.
Part Code
ABM-25MS
ABM-25M2
ABM-25M4
ABM-25M10
Ratio
1:1/2:1
2:1
4:1
10:1
Size
50ml
50ml
50ml
50ml
Analog timed dispenser
Pneumatic dual cartridge guns
ADL series pneumatic hand guns for dual
with adjustable air regulators. Lightweight yet
robust hand guns.
Part Code
CG200-1
CG200-3
CG300-1
CG400-2
CG400-1
CG600-1
Ratio
1:1/2:1
1:1/2:1/4:1/10:1
1:1/2:1
1:1/2:1/4:1/10:1
1:1/2:1
1:1/2:1
Size
200ml
200ml
300ml
400ml
400ml
600ml
Model ADL810 is a bench top pneumatic
dispensing system with vacuum suck back for
making repeat deposits or beads of any fluid, gel
or paste. Comes with a foot pedal, finger switch,
30cc syringe kit and selection of dispense tips.
With a 0-100 psi air regulator and gauge.
Part Code
ADL810
Timer
0.02-30sec
Manual 50ml dual cartridge guns
Budget price 1:1 ratio 50ml dual cartridge gun.
Part Code
ABM-25M1
Ratio
1:1
Size
50ml
3
Analog timed dispenser
Digital timed memory dispenser
The JB1113N is a bench top pneumatic dispensing
system with vacuum suck back for making repeat
deposits or beads of any fluid, gel or paste.
Comes with a foot pedal, finger switch, 30cc
syringe kit and selection of dispense tips. With a
0-100 psi air regulator and gauge.
Compact bench pneumatic dispenser with LCD
display, vacuum, shot counter. Store up to 9 time
settings. Auto cycling. Teach mode. LCD display.
Part Code
JB1113N
Part Code
SL101N
Timer
0.01 – 99.99 second
Timer
0.01-31sec
Air free peristaltic pump dispenser
The 1000T is a bench top pneumatic dispensing
system with vacuum suck back for making repeat
deposits or beads of any fluid, gel or paste.
Comes with a foot pedal, finger switch, 30cc
syringe kit and selection of dispense tips. With a
0-100 psi air regulator and gauge. LED display.
Electric pump system for making repeat deposits
or continuous flow of most low viscosity fluids.
Does not require any air supply. Comes with a kit
of tubes and dispense tips. Forward/reverse
modes.
Part Code
ADL-DISP5600
Timer
0.001-99.99sec
High speed robots for dispensing any fluid, paste,
epoxy, silicone or lubricant. Arm moves into any
position which makes this system ideal for work
cells and conveyors.
Part Code
F2004N
Digital timed ADL dispenser
Part Code
1000T
SCARA 4 Axis dispensing robots
Size
300 x 300
Axes
4
Z Axis dispensing station
Timer
0 – 999 second
A Z axis station designed for integration into a
work cell, automated in-line system or when
manually activated by foot switch. 110 - 220V.
Part Code
Z620
Stroke
0.2-2.0”
Digital timed Techcon dispenser
Compact bench pneumatic dispenser with LCD
display, vacuum, shot counter. TS250 for 0-100
psi use. TS255 for low pressure 0-15 psi on low
viscosity fluids. Rapid dots or controlled beads of
all fluids, all viscosities. 0.02 – 60 sec/ timer.
Part Code
TS250
TS255
Type
0-100 psi
0-15 psi
Digital timed memory dispenser
Digital dispensing system with timer memory
storage (up to 10), teach function for quick setup,
shot counter, dual air outlet, vacuum suck back.
TS350 for 0-100 psi general use and TS355 low
pressure 0-15 psi for watery liquids. Adjustable
timer 0.008 to 60 seconds. All digital dispensers in
the TS series range feature an I/O port that will
accept a 5-24 V DC signal from an external source
such as a PLC or machine.
Part Code
TS350
TS355
XYZ benchtop dispensing robots
High speed robots for dispensing any fluid, paste,
epoxy, silicone or lubricant. Rapid dots, lines, arcs
and circles. Bench top systems with high
resolution and supplied with teach pendant,
dispense system, cables and accessories.
Part Code
F4100N
F4200N
F5200N
F7900N
J2203
J2204
F7300N
F4300N
J2303
J2304
F7400N
F4400N
J2403
J2404
F4500N
F7304N
F7404N
J2503
J2504
Size
150 x 200 x 50mm
200 x 200 x 50mm
200 x 200 x 50mm
200 x 200 x 50mm
200 x 200 x 50mm
200 x 200 x 50mm
300 x 300 x 100mm
300 x 300 x 100mm
300 x 320 x 100mm
300 x320 x 100mm
400 x 400 x 100mm
400 x 400 x 100mm
400 x 400 x 100mm
400 x 400 x 100mm
500 x 500 x 100mm
300 x 300 x 100mm
400 x 400 x 100mm
510 x 510 x 150mm
510 x 510 x 150mm
Axes
3
3
3
3
3
4
3
3
3
4
3
3
3
4
3
4
4
3
4
Z Axis dispensing rotary table
A Z axis rotary table designed for making circular
patterns on areas that are difficult to access.
Allows for tilt, speed variation and circle
diameter. 110 or 220V.
Part Code
RT404-FLEXII
RT404-FLEXIIU
Stroke
2.0” (50mm) (0-60 rpm)
2.0” (50mm) (0-60 rpm)
Type
0-100 psi
0-15 psi
4
Hand lever pinch tube valves
Air operated pinch tube valves
Air operated needle valves
Hand operated valve for the application of low to
medium viscosity fluids such as cyanoacrylates,
solvents, UV cure, anaerobic, primer and
activators.
Plastic
bodied
pen
valves.
Maintenance free replaceable tubes. Takes a
direct feed of fluid from a syringe, cartridge or
pressure pot.
TS series pneumatic operated pinch tube valve.
Operates from a dispenser/ controller for timed
deposits or beads of most low to medium
viscosity fluids. For cyanoacrylates, UV cure,
anaerobic, glue, epoxy, solvents and activators.
TS series pneumatic operated needle valves. For
rapid micro dots of UV cure, inks and lubricants.
Needle shut off point to eliminate dead space and
drips. Stroke control for fine-tuning flow.
Part Code
TS1201
Part Code
TS1212
Size
83 x 40mm
Size
127 x 34mm
Part Code
CV629
TS5420
MV-0180LF
MV-0180-PLF
TS5440
Material
Aluminium
Aluminium
Aluminium
Plastic
Stainless steel
Air operated diaphragm valves
Hand lever diaphragm valves
Hand operated valves for the application of low
to medium viscosity fluids such as cyanoacrylates,
solvents, inks, UV cure, anaerobic, primers and
activators. Takes a direct feed of fluid from a
syringe, cartridge or pressure pot.
Part Code
TS5623HU
TS5623HD
TS5623HT
Material
UHMW
Delrin
Teflon
Pneumatic operated diaphragm valves for use
with most low to medium viscosity fluids. Use
UHMW and Teflon for Cyanoacrylates, solvents,
primers, inks. Use Delrin for UV cure and
anaerobic. Low maintenance design.
Part Code
TS5620HU
TS5621HD
TS5622VU
TS5622VT
TS5622VD
Material
UHMW
Delrin
UHMW
Teflon
Delrin
Air operated precision spray valves
Fine mist spray valves for oils, inks, primers,
activators, glues and lubricants. Round pattern
nozzles in 3 sizes or oval fan type in 3 sizes.
Suitable for marking, bonding, priming and
coating. Adjustable stroke control for flow
control. Use with TS500 R controller.
Part Code
TS5520
TS5540-14R
TS5540-028R
TS5540-046R
TS5540-014F
TS5540-028F
TS5540-046F
SV1000SS
Material
Aluminium round
Stainless round
Stainless round
Stainless round
Stainless fan
Stainless fan
Stainless fan
Stainless round
Nozzle size
0.046”
0.014”
0.028”
0.046”
0.014”
0.028”
0.046”
0.028”
Air operated spool valves
Pneumatic operated spool valves for use with
medium to high viscosity materials such as
Hand operated valves for the application of low silicones, sealants, RTVs, pastes, gels and glues.
to medium viscosity fluids such as cyanoacrylates, High pressure TS941 versions for direct feed of
solvents, inks, UV cure, anaerobic, primers and material from drum pumps or cartridges.
activators. Takes a direct feed of fluid from a
syringe, cartridge or pressure pot.
Part Code
Material
Inlet
Hand lever pen diaphragm valve
Part Code
ADL-200CAM
Material
Teflon
TS5322
TS5322D
TS941
TS941A
AD725D
AD730D
Aluminium
Delrin
Stainless steel
Stainless steel
Stainless steel
Aluminium
1/8”
1/8”
3/8”
1/4”
1/8”
1/8”
Electric motor driven auger valves
Motor drive valve provides a volumetric dispense
of pastes, epoxies, gels for high levels of
repeatability. Replaceable feed paths for zero
cleanup or maintenance. Use with TS500R
controller.
Part Code
TS5000DMP
TS5000DMP55
Material
Delrin/Aluminium
Delrin/Aluminium
Pitch
6, 8 or 16
8
5
Valve controllers
Pressure pots
Vacuum pickup tools
Digital controllers for operating valves by
footswitch or using I/O port. Use TS250 and
TS350 for all pinch tube valves, needle valves,
diaphragm and spool. Use TS500R for all valves as
well as spray and auger types.
Pressure pots for use with many low to medium
viscosity fluids and adhesives. Supplied with fluid
lines and all fittings and adjustable air regulators.
For the safe handling of small components.
Supplied complete with a range of tips and
rubber cups. Ideal for pick and place applications.
Part Code
TS1215
TS2220
TS2250
TS1258
TS1262
TS1210
TS1263
TS1265
Part
TS1206
TS1208
TS8120
VPP803
VPPE511
Part Code
TS250
TS350
TS500R
VCE-1195
TS5440
Timer
0.02-60 seconds
0.08-60 seconds
0.08-60 seconds
0.01-30 seconds
Stainless steel
Size
0.5 Ltr (0-60 psi)
2.0 Ltr (0-75psi)
5.0 Ltr (0-75psi)
5.0 Ltr (0-100psi)
7.6 Ltr (0-60psi)
10.0 Ltr (0-80psi)
11.5 Ltr (0-60psi)
19.0 Ltr (0-60psi)
Description
Manual tool with rubber cups
ESD safe manual tool with cups
Pneumatic pickup finger pen
Pneumatic pickup finger pen
Electric air pickup tool footswitch
Cartridge retainers complete
Syringe filling stations
ADL cartridge retainers for high pressure feed of
liquids; gels and pastes. Safe for use to high air
pressures. Fit industry standard cartridges.
Cartridge transfer to syringe barrels for air-free
filling. Syringe is bottom filled quickly and without
contamination. All systems include retainer, cap,
stand, fittings and accessories. Use with either
regulated air supply or from a pneumatic
dispenser. Systems are suitable for use with our
TS924, ADL810 and 1000T dispensers. Typical
materials used with these systems include
silicones, sealants, RTVs, grease, single part
epoxy, thermal compound, heat sink and gels.
These systems are rated to 100 psi air pressure.
Part Code
110-1
580091H-A
ADL-1211M
TS918-110CS
TS918-120CS
TS918-80CS
TS918-60CS
TS918-25CS
Material
Aluminium
Plastic
Steel
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Size
310ml
310ml
10oz
10oz
12oz
8oz
6oz
2.5oz
Syringe storage racks
Bench racks for holding syringe barrels on a
bench once filled. Eliminates mess of filled
barrels. Please note SR30-24W also accepts 55cc
size barrels.
Part Code
SYR19B
SR03-90W
SR05-60W
SR10-40W
SR30-24W
Description
Metal all size barrels
Plastic 3cc size x 90
Part Code
560548-M
560548-MM
900-6
900-8
560022
900-20
900-32
900-6D
900-8D
900-12D
Description
Plastic 310ml (1/10 gallon)
Metal 310ml (1/10 gallon)
Metal 6oz (180cc)
Metal 8oz (230cc)
Metal 12oz (360cc)
Metal 20oz (600cc)
Metal 32oz (960cc)
Metal 6oz (180cc) with TS924
Cartridge retainer accessories
ADL cartridge retainers for high pressure feed of
liquids; gels and pastes. Safe for use to high air
pressures. Individual parts to make up systems.
Part Code
918-030-000
918-031-000
918-034-000
918-032-000
110-2
918-001-004
918-000-036
101-20R
918-030-036
101-20A
918-000-002
534
918-001-007
918-033-000
918-000-007
918-000-039
918-110-004
918-000-011
918-000-013
Description
Aluminium retainer
Aluminium retainer
Aluminium retainer
Aluminium retainer
Aluminium retainer
Air cap and hose
Air cap and hose
Aluminium retainer
Air cap and hose
Adapter
Air hose and fitting
Air connector
Rubber cap gasket
Bench stand base
Cartridge bracket
Cartridge bracket
Cartridge bracket
Syringe bracket
Valve bracket
Size
2.5oz
6oz
8oz
12oz
310ml
2.5-12oz
310ml
20oz
20oz
20oz
All
All
All
All
2.5-12oz
20oz
310ml
All
All
Syringe bench stands
Bench stands provide a convenient way to hold a
syringe barrel when not being used. SH300 is a 2piece product. TS100 is a single metal part.
Part Code
SH300
TS100
Description
6
700 series syringe barrels
Syringe barrel end caps snap on
Syringe barrel adapter heads
High-density industrial grade syringe barrels
suitable for use to 100 psi. Silicone free plastics.
Luer lock tip attachment. Use with air powered
dispensers and syringe guns.
Syringe caps provide an airtight seal to both ends
of the barrel. Ideal for storing filled syringes for
periods of time. End caps seal the barrel top. Tip
caps seal the luer tip end and fit all barrels.
Includes o-ring and metal clamp for a secure
attachment to adapter hose tube.
Part Code
7030LL1NPK
7050LL1NPK
7100LL1NPK
7300LL1NPK
7550LL1NPK
7030LL1BPK
7050LL1BPK
7100LL1BPK
7300LL1BPK
7300LL1BPK
7030LL1DPK
7050LL1DPK
7100LL1DPK
7300LL1DPK
7550LL1DPK
Size/ Colour
3cc clear
5cc clear
10cc clear
30cc clear
55cc clear
3cc black
5cc black
10cc black
30cc black
55cc black
3cc amber
5cc amber
10cc amber
30cc amber
55cc amber
Pack Size
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Part Code
703000CRPK
705000CRPK
710000CRPK
730000CRPK
Size/ Colour
3cc Orange
5cc Orange
10cc Orange
30/55cc Orange
Pack Size
50
50
50
50
Part Code
703003R
705003R
710003R
730003R
Size
3cc
5cc
10cc
30/55cc
Pack Size
1
1
1
1
Syringe barrel tip caps
7015LLPK
7015LLBPK
7015LLWPK
900-WHTC
900-ORTC
900-BTC
Orange
Black
White
Clear (tri-seal)
Orange (tri-seal)
Black (tri-seal)
50
50
50
50
50
50
Syringe barrel adapter o-rings
Rubber o-rings for syringe barrel adapters. EPR
rubber or Viton rubber.
Tip shields
Plastic tip covers push over the tip to provide a
safe seal. Suitable for all tips up to 1.5” long.
Silicone free plastics. Red tip covers seal the ends
of 14, 16 and 18 gauge tapered tips.
Part Code
7016TC
7016TTC
Size/ Colour
Clear
Red
Part Code
P3015EPK
P3016EPK
P3017EPK
P3018EPK
P3019VPK
P3020VPK
P3021VPK
P3022VK
Description
3cc EPR Rubber
5cc EPR Rubber
10cc EPR Rubber
30/55cc EPR Rubber
3cc Viton Rubber
5cc Viton Rubber
10cc Viton Rubber
30/55cc Viton Rubber
Pack Size
10
10
10
10
10
10
10
10
Pack size
50
50
700 series syringe pistons
Medium-density polyethylene syringe pistons for
use with industrial barrels. Silicone-free and
industrial safe to 100 psi. Use white for general
purpose, blue for high performance no drips and
red when dispensing stringy and thick gels. All
components are supplied in sealed packs. Bulk
bags of 1000 pieces are also available.
Part Code
7030009WPK
7030006RPK
703007BLPK
7050009WPK
7050006RPK
705007BLPK
7100009WPK
7100006RPK
710007BLPK
7300009WPK
7300006RPK
7300006RPK
Size/ Colour
3cc white
3cc red
3cc blue
5cc white
5cc red
5cc blue
10cc white
10cc red
10cc blue
30/55cc white
30/55cc red
30/55cc blue
Pack size
50
50
50
50
50
50
50
50
50
50
50
50
Inline hose filter trap
Inline filter trap used in barrel adapter assembly to
reduce liquid suck back into any pneumatic
dispenser. Supplied with clamps and luer fittings.
Use when dispensing cyanoacrylate adhesives.
Syringe barrel adapters
Provides the air link between pneumatic
dispenser and syringe barrel. One piece moulded
head with o-ring. Clear flexible air hose with male
quick connect fitting.
Part Code
70303RHB
70306RHB
70503RHB
70506RHB
71003RHB
71006RHB
73003RHB
73006RHB
Size
3cc
3cc
5cc
5cc
10cc
10cc
30/55cc
30/55cc
Length
3 foot
6 foot
3 foot
6 foot
3 foot
6 foot
3 foot
6 foot
Part Code
881-000-000
1400-FTR
Description
Filter trap
Filter trap ¼” OD
Pack Size
1
1
Dispenser filter muffler
Cleanroom filter muffler fitting. Filters air output to
0.5 microns. Fits into rear air exhaust port on most
dispensers.
Part Code
560024
Description
Filter muffler
Pack Size
1
7
400 series manual syringes
Smooth flow tapered tips
General purpose tips 1” long
Manual hand syringe assemblies in clear high
density polypropylene with black rubber pistons
and plastic push rods. The barrels are unmarked
clear with either luer lock twist on or luer slip
push on tip attachment.
Industrial grade tapered tips with double helix
luer lock attachment. UV filter plastics Suited for
use with thick pastes, gels, epoxies, solder
pastes, glues and others. Supplied in packs of 50,
500 or 1000. 1.25” long.
Moulded high-density polypropylene hub to burrfree stainless steel shaft. Suitable for all liquids,
glues, pastes and gels. Available in sealed packs
of 50, 500 and 1000. 1.0” long (25.4mm).
Part Code
MS401L-1
MS403L-1
MS403LL-1
MS406L-1
MS406LL-1
MS410L-1
MS410LL-1
MS435LL-1
MS460LL-1
Size/ Type
1cc luer slip
3cc luer slip
3cc luer lock
6cc luer slip
6cc luer lock
10cc luer slip
10cc luer lock
35cc luer lock
60cc luer lock
Pack Size
50
50
50
40
40
30
30
20
20
Part Code
TTN14
TTN16
TTN18
TTN20
TTN22
TTN25
TTN27
Description
14 gauge olive
16 gauge grey
18 gauge green
20 gauge pink
22 gauge blue
25 gauge red
27 gauge clear
ID
1.60mm
1.22mm
0.84mm
0.61mm
0.41mm
0.25mm
0.20mm
Part Code
TE714100PK
TE715100PK
TE718100PK
TE720100PK
TE721100PK
TE722100PK
TE723100PK
TE725100PK
TE727100PK
Description
14 GA olive
15 GA amber
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
27 GA clear
ID
1.60mm
1.37mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.20mm
General purpose tips 1.5” long
of 50, 500 and 1000. 1.5” long (38.10mm).
500 series manual syringes
Manual hand syringe assemblies in clear highdensity polypropylene with black rubber pistons
and plastic push rods. The barrels are unmarked
clear with a luer lock twist on tip attachment.
Part Code
5401000
5401001
5401002
5401004
5401005
5401021
5401022
5401023
5401025
5401026
5401014
5401015
5401016
5401018
5401019
Size/ Type
3cc clear barrel
6cc clear barrel
10cc clear barrel
35cc clear barrel
60cc clear barrel
3cc rubber piston
6cc rubber piston
10cc rubber piston
35cc rubber piston
60cc rubber piston
3cc plastic plunger
6cc plastic plunger
10cc plastic plunger
Pack Size
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
General purpose tips ¼” long
Moulded high density polypropylene hub to burrfree stainless steel shaft. Suitable for all liquids,
of 500 and 1000. ¼” (6.25mm) long.
Part Code
TE714025PK
TE715025PK
TE718025PK
TE720025PK
TE721025PK
TE722025PK
TE723025PK
TE725025PK
TE727025PK
TE730025PK
TE732025PK
TE734025PK
Description
14 GA olive
15 GA amber
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
27 GA clear
30 GA lavender
32 GA yellow
34 GA lime green
ID
1.60mm
1.37mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.20mm
0.15mm
0.10mm
0.08mm
Part Code
TE714150PK
TE715150PK
TE718150PK
TE720150PK
TE721150PK
TE722150PK
TE723150PK
TE725150PK
Description
14 GA olive
15 GA amber
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
ID
1.60mm
1.37mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
SE precision tips
Moulded high-density polypropylene luer lock
hub to burr-free stainless steel shaft. Suitable for
all liquids, glues, pastes and gels. Budget
dispensing tips. Available in sealed packs of 50,
500 and 1000.
SE precision tips 0.5” long
Part Code
SE414050PK
SE415050PK
SE416050PK
SE418050PK
SE420050PK
SE421050PK
SE422050PK
SE423050PK
SE425050PK
SE426060PK
SE427050PK
Graduated manual syringes
All products supplied in packs of 50. Graduated
syringe assemblies including rubber piston and
push rod. Luer lock twist-on or luer slip push on
tip attachment. These products are also available
in bulk packs.
Part Code
MS401L-1G
MS402L-1G
MS402LL-1G
MS403L-1G
MS403LL-1G
MS405L-1G
MS405LL-1G
MS410L-1G
MS410LL-1G
MS420L-1G
MS420LL-1G
MS430L-1G
MS430LL-1G
MS450L-1G
MS450LL-1G
Size/ Type
1ml luer slip
2ml luer slip
2ml luer lock
3ml luer slip
3ml luer lock
5ml luer slip
5ml luer lock
10ml luer slip
10ml luer ock
20ml luer slip
20ml luer lock
30ml luer slip
30ml luer lock
50ml luer slip
50ml luer lock
Pack Size
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Description
14 GA olive
15 GA amber
16 GA grey
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
26 GA beige
27 GA clear
General purpose tips ½” long
SE precision tips 1” long
of 50, 500 and 1000. 0.50” (12.5mm).
SE414100PK
SE415100PK
SE416100PK
SE418100PK
SE420100PK
SE421100PK
SE422100PK
SE423100PK
SE425100PK
Part Code
TE714050PK
TE715050PK
TE718050PK
TE720050PK
TE721050PK
TE722050PK
TE723050PK
TE725050PK
TE727050PK
TE730050PK
Description
14 GA olive
15 GA amber
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
27 GA clear
30 GA lavender
ID
1.60mm
1.37mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.20mm
0.15mm
14 GA olive
15 GA amber
16 GA grey
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
ID
1.60mm
1.37mm
1.19mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.23mm
0.20mm
1.60mm
1.37mm
1.19mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
8
TS precision crimped tips
Polypropylene tips
Teflon soft tube tips
Supplied in sealed packs of 50 tips. Moulded highdensity polypropylene hub crimped to a stainless
steel tube. Suitable for all liquids, glues, pastes
and gels. Luer-lock dispensing tips. Also available
in sealed packs of 500 and 1000.
Moulded high-density polypropylene hub to
flexible shaft. Suitable for all liquids, glues, pastes
and gels. Available in sealed packs of 50, 500 and
1000. Available in 3 different tube lengths.
Flexible soft Teflon tube to polypropylene luer
lock hub. See-thru tube. Ideal for use with
Cyanoacrylate adhesives, solvents and others.
Supplied in packs of 50. Bulk packs on request.
TS precision tips 0.5” long
Part Code
3114PPS-B
3115PPS-B
3118PPS-B
3120PPS-B
3125PPS-B
3114PP-1
3115PP-1
3118PP-1
3120PP-1
3125PP-B
3114PP-B
3115PP-B
3118PP-B
3120PP-B
3125PP-B
Part Code
TF14-1/2
TF16-1/2
TF18-1/2
TF20-1/2
TF22-1/2
TF23-1/2
TF24-1/2
TF30-1/2
TF14-2
TF16-2
TF18-2
TF20-2
TF22-2
TF30-2
Part Code
TS18-1/2
TS19-1/2
TS20-1/2
TS21-1/2
TS22-1/2
TS23-1/2
TS26-1/2
TS27-1/4
TS30-1/2
Description
18 GA green
19 GA brown
20 GA yellow
21 GA green
22 GA black
23 GA blue
26 GA beige
27 GA grey
30 GA lavend
ID
0.84mm
0.71mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.20mm
0.15mm
TS precision tips 1” long
TS18-1
TS19-1
TS20-1
TS21-1
TS22-1
TS23-1
TS26-1
18 GA green
19 GA brown
20 GA yellow
21 GA green
22 GA black
23 GA blue
26 GA beige
0.84mm
0.71mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
Description
14 GA 0.5” Olive
15 GA 0.5” Amber
18 GA 0.5” Green
20 GA 0.5” Pink
25 GA 0.5” Red
14 GA 1” Olive
15 GA 1” Amber
18 GA 1” Green
20 GA 1” Pink
25 GA 1” Red
14 GA 1.5” Olive
15 GA 1.5” Amber
18 GA 1.5” Green
20 GA 1.5” Pink
25 GA 1.5” Red
ID
1.40mm
1.35mm
0.81mm
0.58mm
0.35mm
1.40mm
1.35mm
0.81mm
0.58mm
0.35mm
1.40mm
1.35mm
0.81mm
0.58mm
0.35mm
Description
14 GA olive 0.5”
16 GA purple 0.5”
18 GA pink 0.5”
20 GA yellow 0.5”
22 GA black 0.5”
23 GA blue 0.5”
24 GA red 0.5”
30 GA lavender 0.5”
14 GA olive 2”
16 GA purple 2”
18 GA pink 2”
20 GA yellow 2”
22 GA black 2”
30 GA lavender 2”
ID
1.676mm
1.346mm
1.067mm
0.864mm
0.711mm
0.660mm
0.559mm
0.305mm
1.676mm
1.346mm
1.067mm
0.864mm
0.711mm
0.305mm
All metal tips 0.5” long pack of 10
Polypro tips 1.5” long
Precision bend tips
Moulded high-density polypropylene hub to burrfree stainless steel shaft. Precision bend. Double
helix luer lock. Available in sealed packs of 50,
500 or 1000.
Precision tips 45° bend 0.5” long
Part Code
TE714050B45
TE715050B45
TE718050B45
TE720050B45
TE721050B45
TE722050B45
TE723050B45
TE725050B45
TE727505B45
TE730050B45
Description
14 GA olive
15 GA amber
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
27 GA clear
30 GA lavender
ID
1.60mm
1.37mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.20mm
0.15mm
Moulded high-density polypropylene hub to
flexible shaft. Suitable for all liquids, glues, pastes
and gels. Available in sealed packs of 50, 500 and
1000. 1.50” long (38.10mm).
Part Code
TSP15
TSP16
TSP18
TSP20
TSP22
TSP25
Description
15 GA grey
16 GA brown
18 GA pink
20 GA yellow
22 GA black
25 GA red
ID
1.37mm
1.19mm
0.84mm
0.58mm
0.48mm
0.35mm
14 GA olive
15 GA amber
18 GA green
20 GA pink
21 GA purple
22 GA blue
23 GA orange
25 GA red
27 GA clear
30 GA lavender
1.60mm
1.37mm
0.84mm
0.61mm
0.51mm
0.41mm
0.33mm
0.25mm
0.20mm
0.15mm
12 gauge
13 gauge
14 gauge
15 gauge
16 gauge
17 gauge
18 gauge
19 gauge
20 gauge
21 gauge
22 gauge
23 gauge
25 gauge
26 gauge
27 gauge
30 gauge
2.160mm ID
1.900mm ID
1.600mm ID
1.371mm ID
1.194mm ID
1.066mm ID
0.840mm ID
0.712mm ID
0.610mm ID
0.508mm ID
0.406mm ID
0.330mm ID
0.254mm ID
0.250mm ID
0.203mm ID
0.152mm ID
All metal tips 1” long pack of 10
Precision tips 90° bend 0.5” long
TE714050B90
TE715050B90
TE718050B90
TE720050B90
TE721050B90
TE722050B90
TE723050B90
TE725050B90
TE727050B90
TE730050B90
TS12SS-1/2
TS13SS-1/2
TS14SS-1/2
TS15SS-1/2
TS16SS-1/2
TS17SS-1/2
TS18SS-1/2
TS19SS-1/2
TS20SS-1/2
TS21SS-1/2
TS22SS-1/2
TS23SS-1/2
TS25SS-1/2
TS26SS-1/2
TS27SS-1/2
TS30SS-1/2
Teflon lined tips
Teflon lined crimped tips for use with all
cyanoacrylate adhesives, solvents, glues and inks.
Will not clog as quickly as with standard tips. Luer
lock colour coded hubs. Supplied in packs of 50.
Part Code
5125TLCS
5121TLCS
5125TLC
5121TLC
Description
25 GA pink 0.5”
21 GA grey 1.0”
25 GA pink 0.5”
21 GA grey 1.0”
ID
0.15mm
0.51mm
0.15mm
0.51mm
TS12SS-1
TS13SS-1
TS14SS-1
TS15SS-1
TS16SS-1
TS17SS-1
TS18SS-1
TS19SS-1
TS20SS-1
TS21SS-1
TS22SS-1
12 gauge
13 gauge
14 gauge
15 gauge
16 gauge
17 gauge
18 gauge
19 gauge
20 gauge
21 gauge
22 gauge
2.160mm ID
1.900mm ID
1.600mm ID
1.371mm ID
1.194mm ID
1.066mm ID
0.840mm ID
0.712mm ID
0.610mm ID
0.508mm ID
0.406mm ID
Luer lock all metal precision tips. Suitable for use
with most fluids. Machine made high tolerances.
9
Aluminium precision tips
Cartridges natural HDPE
Standard nozzles
High performance aluminium hub to steel shaft.
Ideal for use with aggressive solvents and other
fluids. Available in sealed packs of 50 or 500.
Natural high-density industrial cartridges. ¼” NPT
nozzle thread. Silicone-free HDPE. Industrial
grade safe to 100 psi. Supplied in sealed packs of
10 or bulk packs.
Part
TS216
TS218
TS416
TS418
TS432
TS490
TS616
TS618
Part Code
TS14-1/2M
TS14-1M
TS14-2M
TS15-1/2M
TS15-1M
TS16-1M
Description
14 GA 0.5”
14 GA 1.0”
14 GA 2.0”
15 GA 0.5”
15 GA 1.0”
16 GA 1.0”
ID
1.55mm
1.55mm
1.55mm
1.37mm
1.37mm
1.19mm
Part Code
TS25C
TS60C
TS80C
TS110C
TS120C
TS20C
TS32C
Description
2.5oz HDPE 1.69” OD
6oz HDPE 1.69” OD
8oz HDPE 1.69” OD
310ml HDPE 1.85” OD
12oz HDPE 1.69” OD
Length
4.00”
7.14”
8.82”
8.99”
12.25”
9.82”
13.75”
Length/ Orifice
2.5” x 1/16”
2.5” x 1/8”
4.0” x 1/16”
4.0” x 1/8”
4.0” x 1/32”
4.0” x 3/32”
6.0” x 1/16”
6.0” x 1/8”
Thread
¼” NPT
¼” NPT
¼” NPT
¼” NPT
¼” NPT
¼” NPT
¼” NPT
¼” NPT
Ribbon nozzles
TS1050
TS1075
TS1100
TS1175
4” x 0.5” x 0.06”
4” x 0.75” x 1/8”
4” x 1.0” x 1/8”
4” x 1.75” x 1/8”
¼” NPT
¼” NPT
¼” NPT
¼” NPT
Roller nozzles
232693
232692
TS1100
TS1175
4” x 1.0” wide
4” x 2.0” wide
4” x 1.0” x 1/8”
4” x 1.75” x 1/8”
¼” NPT
¼” NPT
¼” NPT
¼” NPT
Natural medium-density nozzles. Silicone-free
polyethylene. Industrial grade safe to 100 psi.
Supplied in sealed packs of 10, 50 and 500.
Soft bristle brush tips
Part Code
BT16-SOFT
BT18-SOFT
BT22-SOFT
Description
16 gauge
18 gauge
22 gauge
ID
1.22mm
0.89mm
0.43mm
Stiff bristle brush tips
Part Code
BT16-STIFF
BT18-STIFF
BT22-STIFF
Description
16 gauge
18 gauge
20 gauge
Cartridge adapter fittings
Cartridge plungers
ID
1.22mm
0.89mm
0.43mm
Supplied in sealed packs of 10 tips. Luer lock hub.
Fluid feeds through tip to the bristles. These tips
are ideal for coating, marking and bonding
applications. 1.50” long.
Plungers are for use with dispensing cartridges.
The plunger is inserted into the cartridge once
filled and moves down the inner walls under
pressure to ensure all liquid material is dispensed
without waste.
Part Code
TS1PB
TS1WP
TS3WP
TS2P
TS20P
Cartridge Sizes
2.5,6,8,12oz
2.5,6,8,12oz
2.5,6,8,12oz
310ml
20, 32oz
Colour
Black
Natural
Natural
White
White
Use TSD931-296 to convert 310ml RTV, silicone
and sealant tubes for nozzles and fittings. Use
TSD931-15 for filling syringe barrels. Part TSD9317 is to attach any luer lock tip. 1/4” NPT thread.
Part Code
TSD931-296
TSD931-15
TSD931-7
Description
310ml adapter
Syringe filler adapter
Tip adapter fitting
Colour
Cream
Black
White
Dual component cartridge sets
Tip kits
TN00DKIT
SA7522
SA7521
SA7524
SA7523
SA7529
SA7539
SA7542
SA7543
SA7549
SA7565
SA7569
145 x assorted
22 x blunt end
21 x tapered
50 x blunt end
26 x blunt end
18 x bent tips
40 x polypro tips
50 x crimped tips
40 x Teflon lined
30 x Teflon tips
50 x aluminium
20 x all metal
General Purpose
General Purpose
Tapered
General Purpose
General Purpose
Angled
Polypro
General Purpose
Teflon
Teflon
Aluminium
Stainless steel
Tip kits are a useful method of evaluating any
range. Small starter kits.
Cartridge caps
Re-usable polyethylene end caps for sealing the
top of cartridges and tip caps for a sealed tip end.
Provides airtight seal preventing leaks for fluid
storage. Caps are silicone and chloride free to
prevent contamination.
Part Code
TS2C
TS4C
TS6C
TS3P
TS4P
Cartridge Sizes
2.5,6,8,12oz end cap
310ml end cap
20/32oz end cap
Threaded tip cap all sizes
Threaded tip cap all sizes
Colour
Red
Red
Red
Red
Red
Part Code
451000
452013
454000
454010
422026
422001
422401
422033
400011
400021
400041
400101
Ratio
1:1 ratio
2:1 ratio
4:1 ratio
10:1 ratio
1:1 ratio
2:1 ratio
4:1 ratio
10:1 ratio
1:1 ratio
2:1 ratio
4:1 ratio
10:1 ratio
Colour
50ml
50ml
50ml
50ml
200ml
200ml
200ml
200ml
400ml
400ml
400ml
400ml
Industrial cartridges use with manual and air
powered dispensing guns. Sets include pistons
and tip caps. High-density polypro packs of 50.
10
Mixers for 50ml cartridges
Bayonet inlet, helical static mixer for 50ml and
75ml cartridges. Stepped outlet that can be cut
back to increase orifice size and increase flow
rates. Supplied in packs of 100. Information
shows the inner diameter in mm and the number
of mixer elements.
Part Code
MA3.0-07S
MA3.0-13S
MA3.0-17S
MA4.0-13S
MA4.0-17S
MA5.4-07S
MA5.4-13S
MA5.4-17S
MA6.3-12S
MA6.3-17S
MA6.3-21S
Inner Diameter
3mm
3mm
3mm
4mm
4mm
5.4mm
5.4mm
5.4mm
6.3mm
6.3mm
6.3mm
Elements
7
13
17
13
17
7
13
17
12
17
21
Felt nib dispensing pens
Flexi dispense bottles
AD50BC
AD75BC
AD1BC
AD2BC
AD4BC
AD8BC
15ml size (1/2oz)
20ml size (3/4oz)
30ml size (1oz)
60ml size (2oz)
120ml size (4oz)
240ml size (8oz)
LDPE
LDPE
LDPE
LDPE
MDPE
MDPE
Replacement caps only
AD75C
AD2C
AD4C
AD8C
20ml caps (3/4oz)
60ml caps (2oz)
120ml caps (4oz)
240ml caps (8oz)
Nylon
Nylon
Nylon
Nylon
Flexible dispensing bottles with luer lock
threaded caps. Accept any dispense tip for
leak free attachment. Supplied with 10
bottles and 10 caps per pack.
Dispensing pens with chisel nib caps and end cap
seals. Ideal for all low viscosity liquid fluxes,
primers, activators, solvents.
Part
FPA-10
FV-0600
FV-0300
FV-0400
FV-0500
381-8425-AB
381-8425-AC
381-8425-AP
381-600-PB
Description
10ml pen chisel nib
1.5oz jumbo pen blk
2oz nib flow pen clear
4oz nib flow pen clear
4oz nib flow ESD safe
Acrylic bullet nib
Acrylic chisel nib
Acrylic point nib
Jumbo nib FV-0600
Body
Aluminium
Plastic
Plastic
Plastic
Aluminium
Acrylic
Acrylic
Acrylic
Polyester
PolySpence™ dispense bottles
5606010
5606011
5606012
5606013
5606014
1/2oz size (15ml)
1oz size (30ml)
2oz size (60ml)
4oz size (120ml)
8oz size (240ml)
LDPE
LDPE
LDPE
LDPE
LDPE
Mixers for 200/400ml cartridges
PolySpence™ PE lined cap
Bell mouth inlet, helical static mixer for 200ml
and 400ml cartridges. Stepped outlet that can be
cut back to increase orifice size and increase flow
rates. These mixer nozzles are suitable for all
two-component materials. They have white
elements and are constructed of high grade
polypropylene. Packs of 100.
5606018
5606019
Part Code
MC06-18
MC06-24
MC06-32
MC08-18
MC08-24
MC08-32
MC10-18
MC10-24
MC10-32
MC13-18
MC13-24
Flexible dispensing bottles using a nozzle
spout. Flexible LDPE for low viscosity fluids.
Bottles can be used with a spout cap and
stored with a PE lined cap. In packs of 10.
Inner Diameter
6mm
6mm
6mm
8mm
8mm
8mm
10mm
10mm
10mm
13mm
13mm
Elements
18
24
32
18
24
32
18
24
32
18
24
2oz size (60ml)
4/8oz size (120/240ml)
1/2oz size (15ml)
1oz/2oz size (30/60ml)
4oz/8oz size (120/240ml)
1/2oz size (15ml)
5606022
5606023
1oz Eco Kit
2oz Eco Kit
LDPE
LDPE
Eco™ Kit bottles
Phenol
Phenol
5606007
5606028
1oz bottle only
2oz bottle only
LDPE
LDPE
Eco™ dropper plug & seal cap
PolySpence™ Spout-cap seal
5606015
5606016
5606017
5606015
Eco™ Kit bottles
LDPE
LDPE
LDPE
LDPE
5606024
5606025
Pressfit dropper 1oz/ 2oz
Seal-Cap 1oz and 2oz
LDPE
Phenol
Low cost squeeze bottle kit that includes a
press-fit dropper plug, which can be safely
inserted into the LDPE bottle secured by a
ported seal cap (included). Ideal for CAs.
High density touch pump bottle
PolySpence glass bottle dropper
Mix nozzle tip adapters
These threaded luer lock adapters twist over the
end of the mixer nozzle to allow any dispense tip
to be used. Packs of 10.
Part
LA05-00
LA06-08
LA10-00
Size
To 5mm nozzle
To 8mm nozzle
To 10mm nozzle
Colour
White
Grey
Black
5606020
5606021
2oz (60ml) clear glass
Dropper with cap
Glass
Glass
A 2oz (59.14ml) boston round flat bottom
glass bottle. Bottles can be used with the capseal threaded dropper.
5606026
5606027
3.4oz (100ml)
7.0oz (200ml)
Pump
Pump
Touch-pump bottles provide an economic,
clean and safe method of conveniently
presenting a small reservoir of solvent,
cleaner or alcohol. Ideal for soldering
operations and clean rooms.
11
Fume filtration systems
DipIt Brushes
Comfortable, form fitting DipIt brushes
include corrosion resistant, static dissipative
zinc plated stainless steel and clean room
Delrin styles. Brush materials are nylon and
natural bristle. Handle holds fibres in place by
5 tons of mechanical clamping without any
adhesives that could leach and contaminate
surface areas.
Part No
5701272
5701273
5701274
Description
Delrin to nylon soft
Zinc to nylon brush
Dual head 3/16” to
Brush Size
¼”
3/8”
¼”
Systems to filter adhesive and solvent fumes in
the workplace. Units with flexible arm hoses or
cabinet units to position on bench.
Part No
BVX-103
BVX-203
A300S
A200S
A200H
A100H
T570H-C
T500S-C
T660H-C
T700S-C
T930H-C
Description
Single arm
Dual arm
Cabinet unit A3
Cabinet unit A2
Cabinet unit A2
Cabinet unit A1
Cabinet unit 570mm
Cabinet unit 460mm
Cabinet unit 660mm
Cabinet unit 785mm
Cabinet unit 930mm
Type
Filtration
Filtration
Filtration
Filtration
Filtration
Filtration
Filtration
Filtration
Filtration
Filtration
Filtration
Techkit cartridges
For filling, storing, mixing and dispensing two
component
materials
direct
from
the
convenience of an industrial cartridge. Once
mixed, the rod is removed to allow the blended
material to be dispensed. Injection cartridges for
materials over 10:1 mix ratio. Barrier cartridges
for mix ratio’s under 10:1.
Luer lock female plastic fittings
High density fluid fittings. Supplied in sealed
packs. We carry stocks of many other
components, please contact us.
Part Code
TSD931-15
TSD931-54PP
TSD931-23
TSD931-30
TSD931-47
TSD931-42
TSD931-28
TSD931-28A
TSD931-13C
TS931-17PA
Description
¼” NPT polypro
1/8-27 elbow
¼-28 polypro
10-32” polypro
1/8” elbow
Stopcock 2way
Female straight
Female elbow
0.170” barb
¼” barb
Colour
Black
Clear
Clear
Clear
Clear
Clear
Clear
White
Clear
White
Fume extraction systems
Systems to remove adhesive and solvent fumes
from the workplace. Cabinet units to position on
the workbench.
Part No
A300S-D
A200H-D
T500S-D
T660H-D
T930H-D
Description
Cabinet unit A3
Cabinet unit A2
Cabinet unit 550mm
Cabinet unit A2
Cabinet unit A1
Type
Extraction
Extraction
Extraction
Extraction
Extraction
Luer lock male plastic fittings
Air Compressors
High-density fluid fittings. Supplied in sealed
packs. We carry stocks of many other
components, please contact us.
Silent running compressors for operating all
dispensers, guns and valves. Only 40dB so runs as
quiet as a refrigerator.
Part Code
TSD931-7
TSD931-7C
TSD931-26C
TSD931-49C
TSD931-62
TSD931-3
TSD931-17PP
TS931-17AB
TS931-17AC
TS931-17AE
TSD931-28
Description
¼” NPT polypro
¼” NPT polypro
10-32” polypro
¼-28” polypro
1/8” polypro
Plug seal polypro
0.170” barb
1/8” OD barb
3/32” barb
¼” barb
Syringe to syringe filler
Colour
White
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Part No
COMP-BB8
COMP-BB15
COMP-BB24
Description
50 litres/minute
50 litres/minute
50 litres/minute
Part No
110-80
110-81
250-60
250-81
600-60
600-61
800-80
800-81
200-80
200-81
Cartridge Size
1/10 gallon (310ml)
1/10 gallon (310ml)
2.5oz (60ml)
2.5oz (60ml)
6oz (180ml)
6oz (180ml)
8oz (230cc)
8oz (230cc)
20oz (600cc)
20oz (600cc)
Type
Injection
Barrier
Injection
Barrier
Injection
Barrier
Injection
Barrier
Injection
Barrier
Tank Size
8 Litre
15 Litre
24 Litre
12
Air filters and regulators
Semkit/ Techkit Auto Mixers
Hotmelt applicator valves
Filters that remove particles and moisture in air
supply to dispensers.
Machines for the easy mixing of Techkit and
Semkit packaged cartridges. These versions are
fully automatic. They allow the user to place a
Techkit/ Semkit cartridge onto the machine and
set it to fully rotate and move the mixer rod up
and down.
Part No
Description
Voltage
TS6500
TSI Mixer
110V-220V
234535
Model 388 Mixer
220V
Applicator heads are available as all-electric and
pneumatic options for fixed mounting or as hand
guns and vertical grip applicators.
Part No
Description
Voltage
HE22024
24VDC coil electric
220V
HE220
220V coil electric
220V
HA220
Air operated
220V
Part Code
TSD800-6
TSD800-6FR
580101
Description
5 micron filter
5 micron regulator
5 micron filter
Thread
¼”
¼”
¼”
Hotmelt system solenoids
External electric 4 way solenoid opens/ closes air
to air operated valve. 3 way solenoid used for
manifold applicator only.
Part No
Description
Voltage
HS4220
Applicator head 4 way
220V
HS424
24V
HS3220
220V
HS324
24V
Air and liquid manifolds
Air manifolds for operating multiple valves or
syringe barrels. And liquid manifolds for feeding
multiple valves from a single pressure pot.
Part Code
TS99-2N
TS98-2N
TS99-4N
TS98-4N
TS99-6N
TS98-6N
TS99-8N
TS98-8N
TS99-10N
TS98-10N
TS99-2SS
TS98-2SS
TS99-4SS
TS98-4SS
TS99-6SS
TS98-6SS
TS99-8SS
TS98-8SS
560540
560540-14
560055
560542
560542-14
560057
560543
560539
Description
3/8” inlet to ¼” outlet
¼” inlet to 1/8” outlet
3/8” inlet to ¼” outlet SS
¼” inlet to 1/8” outlet SS
Liquid only 3/8” tubing
Liquid only ¼” tubing
Air only to quick connect
Liquid only ¼” tubing
Outlets
2
2
4
4
6
6
8
8
10
10
2
2
4
4
6
6
8
8
2
2
2
4
4
4
6
8
Hotmelt adhesive controller units
Positive displacement, all electric hot melt tanks
designed for temperature-controlled application
of pressure sensitive adhesives, contact
adhesives, waxes and sealants.
Part No
Description
Timer
HM12-220
5 Liter single hose
Analog
HM14-220
7 Liter 1 or 2 hose
Digital
HM34-220
16 Liter 1 to 4 hose
Digital
Hotmelt module valves
Provides zonal temperature control of hotmelt
glues from tank unit to gun applicator. PTFE core,
stainless steel core, high temperature insulation
with braid cover. Lengths from 4’ to 24’.
Part No
Description
Voltage
HE-6-6-220
6’ long hose 3/8” dia.
220V
HE-6-8-220
8’ long hose 3/8” dia.
220V
HE-6-10-220 10’ long hose 3/8” dia.
220V
Module valves are fitted to the manifold to
dispense the material.
Part No
Description
mm
HM00
Standard
HM43
1 valve
0.381
HM42
2 valve
0.508
HM41
2 valve
0.645
Machines for the easy mixing of Techkit and
Semkit packaged cartridges. These versions
feature an electric motor that rotates the kit as it
is moved up and down.
Description
Model 285-A Mixer
Model 285E Mixer
Voltage
110V
220V
Material is fed to the manifold by the heated
hose which also controls heating the manifold &
provides a signal to the solenoid.
Part No
Description
Voltage
HM072
1 way manifold
220V
HM074
2 way manifold
220V
HM076
4 way manifold
220V
Hotmelt tank heated hoses
Semkit/ Techkit Electric Mixers
Part No
229340
234535
Hotmelt 3 way manifolds
Hotmelt hand dispensing guns
Hand operated guns with integrated hanger for
hook up. Built in thermistor sensor provides an
accurate temperature. Separate trigger switch is
provided for gear pump and air activation of swirl
spray. The hose swivels 360°so no hose twist.
Part No
Description
Voltage
HGBE220
Hand gun bottom entry
220V
HGTE220
Hand gun top entry
220V
HMA90
90°adapter nozzle
HMA45
45°adapter nozzle
Hotmelt nozzles
Bead and shot nozzles are available in lengths of
0.5”, 1”, 2”, 3” and many other sized orifices.
Part No
Description
Dia.
HN0205
0.5” Long
0.508mm
HN0305
0.5” Long
0.762mm
HN0401
1.0” Long
1.016mm
HN0501
1.0” Long
1.270mm
HN0602
2.0” Long
1.524mm
HN0702
2.0” Long
1.778mm
HN0803
3.0” Long
2.032mm
HN0903
3.0” Long
2.286mm
13
Cyanoacrylate adhesives 50g
UV Cure adhesives
Industrial grade instant adhesives. Highest quality
blended materials. For rubber, plastic, metal,
paper and card bonding. In 50gram or 500gram
sized bottles. Activator is in 200ml aerosol.
Debonder glue remover is in 50gram bottle.
An advanced range of solvent free UV curable
adhesives that provide a revolutionary solution
for glass, plastic and metal assemblies. From rigid
structural bonds to flexible elastomers, this group
of products will cure on demand, yet still provide
visual clarity. Also available in 250ml & 1000ml
bottles.
Part No
GB06-50
GB01-50
GB16-50
GB44-20
GB80-50
SA01
DB50
Description
Low viscosity
Medium viscosity
High viscosity
20g gel tube
Rubber toughened
Spray activator 200m can
CA Remover Debonder
Colour
Clear
Clear
Clear
Clear
Black
Clear
Clear
Cyanoacrylate adhesives 500g
GB06-500
GB01-500
GB16-500
GB80-500
Low viscosity
Med. viscosity
High viscosity
Rubber toughened
Part No
UV01-50
040111-50
UV3088-50
040116-50
UV4006-50
120908HS
0810-2000
TS85UV
Description
UV clear bond general
Glass/ metal bonder
Glass/ plastic bonder
Glass/ plastic bonder
Plastic UV bonder
Plastics/ metal bonder
UV doming resin
LED UV Torch 1 Watt
Size
50ml
50ml
50ml
50ml
50ml
50ml
50ml
n/a
Clear
Clear
Clear
Black
Prefilled syringe barrels
Syringe barrels are available packaged in sizes
from 1cc to 60cc for most single part materials as
well as resin pre-mixed and frozen materials.
We provide syringes filled with your selected
material and packaged air-free for controlled
dispensing. By receiving your material packaged
in a high quality barrel, you eliminate the need to
transfer from drums, cans or tins. Each barrel is
supplied with a data label including batch code,
part no, date of fill, shelf life and material safety
information.
Epoxy resin, acrylics, PU’s
Anaerobic adhesives 50g bottles
Anaerobic adhesives cure in the absence of air.
These adhesives are designed to lock and seal
metal components and fasteners and are
available in a range of thicknesses, from thin
water to heavy paste. Also available in 250 gram
sized bottles.
Part No
A02
A03
A04
A05
A07
A08
A11
A14
Description
Low strength screw
Mid strength screw
High strength screw
Low viscosity sealant
High strength locker
Mid strength locker
Hi strength retainer
Mid strength retainer
Colour
Purple
Blue
Red
Green
Red
Blue
Green
Yellow
EP1
EP2
EP3
EP4
EP5
EP95
6000-50
EP6-40
EP9-50
EP7-50
EP8-50
General purpose putty 56g
Steel strong putty 56g
Aqua stick putty 56g
Fast setting putty 28g 1:1
Steel strong epoxy 28g 1:1
Rapid cure epoxy 50ml 1:1
Low odour acrylic 50ml 1:1
PU flexible resin 40ml
PU rigid plastic repair 50ml
PU semi-rigid resin 50ml
PU flexible resin 50ml
Green
Silver
Green
Clear
Silver
Clear
Clear
Clear
Clear
Clear
Clear
Range of epoxy adhesives, acrylics and PUs are
versatile and easy to use, solvent free they
provide excellent adhesion. These can be used to
bond or repair a wide range of materials.
ADHESIVE DISPENSING LIMITED
Solutions customers stick with…
Bletchley Park
Milton Keynes, Bucks, MK3 6EB UK
Tel. +44 (0) 1908 363 432
Tel. +44 (0) 845 652 0058
Fax. +44 (0) 845 652 0059
info@adhesivedispensers.co.uk
www.adhesivedispensers.co.uk
New website
www.adhesivedispensing.net
Registered in England & Wales 6048283
Vat Registration No. 901 8594 21
Products are industrial grade safe
Components are silicone-free
Version 130110-1
© Copyright Adhesive Dispensing Ltd
14

Full Catalogue - Adhesive Dispensing Ltd

Transcription

Similar documents

Dispensing Consumables, Barrels, Syringes, Needles