GV - Cage Nitro Manual

INTRODUCTION
INTRODUCTION
Thank you for selecting this Great Vigor Product.
Please read all instructions and familiarize yourself with the products and controls before
operation. To prevent serious personal injury and/or property damage, operate all controlled
models in a responsible manner as outlined herein. If you come across any problems and
need some help, you can contact us on the internet at www.gv-hobby.com.tw.
We hope you to enjoy our product.
˙ This product is not a toy. It is a high performance model product. It is important to familiarize yourself with the model,
˙
˙
˙
its manual, and its construction before assembly or operation. A child operating under the supervision of the adults is
necessary.
Always keep this instruction manual ready at your hand for your assembling and operating reference, even after
completing the assembly.
CAUTIONS
CAUTION
CHOOSE THE RIGHT PLACE TO OPERATE YOUR R/C MODEL.
˙ Do not operate model products in rain, on public roads, near crowds, near airport, or near areas with restricted radio
˙
operation. This could cause serious accidents, personal injuries, and/or property damage.
˙ Do not run where loud noises can disturb others, such as hospitals and residential areas.
˙
˙ Never run R/C models near people or animals.
˙
˙ Never run indoors. There is a high risk of fire and/or damage.
˙
˙ To avoid injury, do not run in confined spaces.
˙
INSPECT YOUR MODEL BEFORE OPERATION.
˙ For the best performance, it is important to make sure all the moveable parts work free without binding.
˙
˙ Always use fresh batteries for your transmitter and for your receiver to avoid losing control of the model.
˙
˙ Check the radio system and range before every driving session. To properly check the range, have a friend hold the
˙
˙
˙
˙
˙
˙
˙
˙
˙
˙
˙
˙
˙
car with the engine off and walk to the farthest distance that you plan to operate your model. Operate the controls
to make sure the model responds correctly. Do not operate the model if there is any problem with the radio system.
Never share frequency with somebody else at the same time. Radio signals will be mixed and you will lose control of
your model. This may lead to accidents.
Make sure that all screws and nuts are properly tightened. It is also a good idea to use removable thread lock
wherever metal screws go into metal.
Always test the brakes and throttle before starting your engine to avoid losing control of the model.
As the front end of the antenna may be dangerous, do not aim it toward faces.
Never reverse connection/disassemble the battery. This may lead to damage and leakage.
As the product includes small and sharp parts, assemble and store this product only in places out of the reach of
children.
AFTER OPERATION OF YOUR R/C MODEL
˙ Turn off receiver first, then turn off transmitter, this will prevent runaways.
˙
˙ Be sure to keep your R/C model clean and free of excess dirt and grease, this will increase the life.
˙
˙ Be careful when handling batteries, they will be hot after running.
˙
˙ When the model is not in use, always turn off the receiver and transmitter. Furthermore, disconnect the batteries and
˙
remove them from the model and the transmitter. This may be dangerous such as overheat and leakage.
˙ Replace any batteries, they have been dented or have frayed wires, short circuits can cause fire.
˙
˙ Do not store this model in a high-temperature/humidity area or in direct sunlight.
˙
1
INTRODUCTION ITEMS NEEDED FOR OPERATION
ADDITIONAL
˙Receiver
˙Tx/Rx Charger
˙Engine
˙Plug
˙Servo
˙2 Channel Radio Set
˙Um-3 Battery (8 Pcs)
˙Fuel&Fuel Pump
˙Battery
˙Glow Plug Igniter
CAUTIONSSTUFF NEEDED
EXTRA
˙Needlenose Pliers
˙Body Scissors
˙Screwdriver (-)
˙Body Reamer
˙Cutting Pliers
˙Caliper
˙Screwdriver (+)
˙Shock Oil
2
˙Tongue and Groove Pliers
˙Knife
˙Hex Wrench
(1.5,2.0,2.5,3.0mm)
˙Diff Silicone oil
Step 1
Front, Rear and Centre Differentials
1A - O-Ring 3x1mm -- 12
1B - Pin 2.5x12.8mm -- 6
MV11721
MV11711
1C - Pin 4x26.6mm -- 6
1A
1C
MV22873
1A
1G
1G
1D
1D
MV22873
1F
1F
1F
1F
MV22873
1C
<1-1>
MV22811
(43T)
MV22873
MV22873
MV22873
Differential
Oil
Differential
Oil
Step 1-1
MV22832
(48T)
1B
1B
MV22873
1B
MV22873
For Front and Rear (x2)
For Centre (x1)
1E
1G
1A
MV11721
For Front and Rear (x2)
Differential Oil -- 1
MV11711
For Centre (x1)
1E - Grub Screw 4x3mm -- 3
1F - F/H Tapping Screw 3x16mm -- 12
1G - Ball Bearing 8x16x5mm -- 6
1D - Shim 8x12x0.4mm -- 3
3
Step 2
Front Gearbox
2A - Button Head Tapping Screw 3x38mm -- 2
2B - Button Head Tapping Screw 4x12mm -- 2
2D
2C - Button Head Tapping Screw 3x10mm -- 1
2D - Grub Screw w/Threadlock 5x4mm -- 1
2B
MV1173
2F
2E - Shim 8x12x0.4mm -- 1
XV1631
MV162D4
2E
XV1421
XV1631
2F
XV162U1AL
Step 2-1
MV22821
(13T)
<2-1>
Step 1
2C
2F - Ball Bearing 8x16x5mm -- 2
2A
Step 3
Front Shock Tower and Chassis Brace
3A - Lock Nut 4mm -- 1
3C - Lock Nut 3mm -- 4
3B - Button Head Tapping Screw 3x12mm -- 1
3C
XV1625F1
3E
3A
3C
XV1321AL
MV110
3F
Step 2
3B
3D - Cap Screw 3x18mm -- 4
MV110
3E - Cap Screw 3x25mm -- 2
3F - Cap Screw 4x50mm -- 1
3D
4
Step 4
Front Suspension
4C - Pin 2.5x13.8mm -- 2
4A - Grub Screw w/Threadlock 4x3mm -- 4
4D - Pin 2.5x16.8mm -- 2
4B - Grub Screw w/Threadlock 5x5mm -- 2
4E - Shim 8x12x0.2mm -- 2
4D
4F - Ball Bearing 8x16x5mm -- 4
4B
MV107
4F
4E
4C
4F
MV134
4A
MV3575
MV3574
MV3575
4A
For Right and Left Sides
Step 5
Front Upper Arm
For Right and Left Sides
XV349F1
5B
(MV3491)
5A
XV11304
8.8mm
XV11304
XV349F1
5A - Grub Screw 4x10mm -- 2
XV347F1
(R)
5B - Turnbuckle 5x25mm -- 2
For Right and Left Sides
5
Step 6
Front Upper Arm
Step 5
6A
For Left Side
6A
Step 5
Step 4
XV13401
XV13401
Step 4
Step 5
6A
For Right Side
Step 5
6A
6A - Button Head Machine Screw w/Threadlock 4x20 mm -- 4
Front Suspension
Step 7
Step 3
7A
Step 6
(R)
7C
Step 6
(L)
7D
(MV11101)
7B
MV162D5AL
7D - Hinge Pin 4x67.5mm -- 2
7A - Lock Nut 3mm -- 2
7B -- Button Head Tapping Screw 4x8mm -- 2
7C - Cap Screw 3x45mm -- 2
6
Step 8
Rear Gearbox
8A
8A - Button Head Tapping Screw 3x38mm -- 2
XV162U2AL
8B - Button Head Tapping Screw 4x8mm -- 2
8C - Grub Screw w/Threadlock 5x4mm -- 1
8D
8D - Grub Screw 4x4mm -- 2
XV3613
8E
8F
XV1631
MV22821
(13T)
<8-1>
Step 8-1
8C
XV3613
Step 1
MV1173
XV162U1AL
8F
8E - Shim 8x12x0.4mm -- 1
XV1631
8F - Ball Bearing 8x16x5mm -- 2
8B
Step 9
Wing Mount
MV1412
9A
9B
(MV1412)
MV1412
MV1412
9A
MV1412
9A - Button Head Tapping Screw 3x18mm -- 4
9B - Post 6x32mm -- 2
7
Step 10
Rear Shock Tower
10E - Cap Screw 4x45mm -- 1
10A - Lock Nut 3mm -- 4
10B - Lock Nut 4mm -- 1
10F - Cap Screw 4x50mm -- 1
10C - Button Head Tapping Screw 3x10mm -- 2
10D - Cap Screw 3x25mm -- 6
MV110
10C
10D
<10-1>
MV1671
XV1333AL
Step 9
10B
Step 10-1
10F
10D
MV1411
10E
10B
XV1624R1
10B
10D
Step 8
8
Step 11
Rear Suspension
11A - Grub Screw w/Threadlock 5x5mm -- 2
For Left Side
11B
11B - Pin 2.5x16.8mm -- 2
11C
11A
MV107
11C - Shim 8x12x0.2mm -- 2
11D
11D
MV3462
11D - Ball Bearing 8x16x5mm -- 4
MV105
For Right Side
Step 12
Rear Upper Arm
12B - Grub Screw 4x10mm -- 2
12A - Lock Nut 3mm -- 4
12C - Cap Screw 3x25mm -- 2
XV349R1
12D - Hub Stud 3x38mm -- 2
12E
MV113
12E - Turnbuckle 5x36mm -- 2
MV113
XV349R1
For Right and Left Sides
<12-1>
10mm
Step 12-1
Step 12-1
For Right Side
12C
12C
12A
Step 11
(R)
12D
12B
12A
Step 11
(L)
12B
12D
12A
XV347R1
XV347R1
12A
For Left Side
9
Step 13
Rear Suspension
13A - Flanged Lock Nut 3mm -- 2
13B - Button Head Tapping Screw 4x12mm -- 2
13B
13C
MV162D4
Step 12
(R)
13A
13D
(MV11101)
Step 10
Step 12
(L)
MV3562
13C - Cap Screw 3x20mm -- 2
13D - Hinge Pin 4x67.5mm -- 2
Step 14
Rear Sway Bar
XV3613
Step 14-1
14A
14B
XV3613
XV3613
XV3613
4.5mm
14C
14A - Grub Screw w/Threadlock 3x3mm -- 2
Step 13
14B - Grub Screw 3x16mm -- 2
14C- F/H Hex Screw 3x20mm -- 2
10
<14-1> (x2)
Step 15
Side Guard
15A - F/H Tapping Screw 3x12mm -- 8
MV1674
MV1657
MV1674
MV3002RAL
(R)
MV1657
15A
15A
15A
MV3002LAL
(L)
MV1674
MV1674
MV1657
MV1657
15A
15A
15A
11
Step 16
Chassis
16C
MV3114AL
16C
Step 15
(R)
16C
MV30731
MV30731
16A
16C
MV30101AL
16A
Step 15
(L)
16C
16B
16A
16B
16B
16A - F/H Machine Screw 3x10mm -- 8
16B - F/H Machine Screw 4x10mm -- 6
16C - Lock Nut 3mm -- 8
12
Step 17
Steering Rods
MV11303
17A - Turnbuckle 4x48mm -- 2
17A
MV1301
V221524
MV11303
V221524
30.5mm
For Right and Left Sides (x2)
Step 18
Steering
18D
18A - Lock Nut 3mm -- 4
MV30731
18B - Servo Saver Screw 3x19.7mm -- 2
18C - Cap Screw 3x20mm -- 2
MV3071
18D
MV3071
MV3071
18D - Bushing 6x10x3mm -- 4
MV30731
MV30731
18D
18E - Shim 8x12x0.8mm -- 2
18D
18B
<18-1>
18A
18F
MV30751AL
18B
18F
18A
18E
18E
Step 18-1
Step 18-1
Step 17
(R)
18C
18A
Step 17
(L)
18A
18C
18F - Flanged Ball Bearing 5x8x2.5mm -- 2
13
Step 19
Receiver Case
19A
MV37412
XV30221AL
MV3103
MV120
Battery Holder
MV3103
19A
19A
CH1
Steering
19A
<19-1>
19A
MV37412
CH2
Throttle
19B
19C
Receiver
MV37412
Step 19-1
Switch
19A - Button Head Tapping Screw 3x10mm -- 12
19B - Round Head Machine Screw 2x15mm -- 1
19C - Round Head Machine Screw 2x10mm -- 2
14
Step 20
Gearbox Centre
20B - Brake Pin 3x10mm -- 4
20A - Button Head Tapping Screw 3x10mm -- 4
20C - Ball Bearing 3x6x2.5mm -- 2
MV3062
MV3062
XV3041
20B
MV309
<20-1A>
20A
MV30427AL
MV1261
20C
MV1261
Step 20-1B
20C
Step 1
20B
Step 20-1A
MV3062
XV3041
MV3062
MV309
<20-1B>
15
Step 21
Shock Bodies and Shock Shafts
21A - Lock Nut 2.6mm -- 4
21F - Shock Shaft 3.5x56.2mm -- 2
21G - Shock Shaft 3.5x65.7mm -- 2
21B - Washer 2.5x5.9x0.5mm -- 4
21H - Shock Body 14x45mm -- 2
21C - O-Ring 2.5x1mm -- 4
21D - O-Ring 3mm -- 4
21I - Shock Body 14x53mm -- 2
21E - O-Ring 3.5mm -- 8
21J - O-Ring 3x1mm -- 8
21K - O-Ring 12.4x1.78mm -- 4
MV138011
For Left Side(x2)
21A
21C
3.5mm 3.5mm
21B
Please Lock Here
3x1mm 3mm
21F
(MV138011)
Step 21-1
21A
21B
21D
MV138016
MV139011
21H
(33B450AL)
Step 21-1
21E
MV138011
(MV1592)
21C
21G
(MV139011)
21J
Please Lock Here
33B450AL
21D
MV138016
21I
(33B530AL)
For Right Side(x2)
21E
MV139011
(MV1592)
21J
33B530AL
3.5mm 3.5mm
3x1mm 3mm
<21-1>
21K
33B450AL
16
Step 22
Shock Oil
MV138016
Silicone Shock Oil
(Not Included)
33B450AL
(33B530AL)
! After filling with shock oil,
GENTLY pump shock shaft
up and down several times
to eliminate air bubbles.
Step 21
Step 23
For Front and Rear (x4)
Shock Springs
For Front (x2)
Step 22
(F)
MV138011
(MV112)
MV138016
Step 22
(R)
23A
(MV1383GA)
MV139011
(MV112)
MV138016
23B
(MV1393GA)
For Rear (x2)
23A - Front Shock Spring 58x1.6mm -- 2
23B - Rear Shock Spring 80.5x1.6mm -- 2
17
Step 24
Front and Rear Shock Mounting
MV1382
24B
Step 23
Step 23
For Front
Step 7
24A
Step 14
Step 23
MV1382
24B
Step 23
24A
For Rear
24A - F/H Machine Screw 3x20mm -- 4
18
24B - Flanged Lock Nut 3mm -- 4
Step 25
Radio Tray Mounting
Step 19
Step 16
25A
25A
25A
25A
25A
25A - F/H Tapping Screw 3x10mm -- 9
19
Step 26
Centre Differential and Drive Shafts
26B
26B
Step 20
Step 25
26C
26C
26A
26A - F/H TappingScrew 4x12mm -- 4
26B - Button Head Machine Screw 3x12mm -- 2
20
26C - Lock Nut 3mm -- 2
Step 27
Front Suspension Mounting
MV3561
Step 27-1
Step 26
Step 24
27B
27A
27A
XV1401
<27-1>
27A - F/H TappingScrew 4x16mm -- 4
27B - F/H TappingScrew 4x12mm -- 2
21
Step 28
Front Suspension Mounting and Steering Linkage
28C
28F
28B
XV30762AL
28E
28A
Step 18
28E
Step 27
28D
28D
28A - Shim 6x10x0.2mm -- 2
28D - Button Head Machine Screw 3x22mm -- 2
28B - Washer Head Machine Screw w/Threadlock 4x10mm -- 2
28E - Button Head Machine Screw w/Threadlock 3x20mm -- 2
28C - Button Head Tapping Screw 3x15mm -- 1
22
28F - Lock Nut 3mm -- 2
Step 29
Rear Suspension Mounting
Step 24
29C
MV3551
Step 28
29A
29A
29B
29A - F/H Tapping Screw 4x16mm -- 4
29B - F/H Machine Screw 3x20mm -- 1
23
29C - Lock Nut 3mm -- 1
Step 30
Engine and Clutch
30C
Engine
30A - Lock Nut 3mm -- 4
30B - Button Head Screw Machine 3x6mm -- 1
30C - Cap Screw 3x16mm -- 4
30D - Shim 5x8x0.2mm -- 2
MV36304
30E - Shim 5x8x0.4mm -- 1
30F - Washer 5x8x1mm -- 1
30C
MV1981
30H
(SG)
30D
MV3113
30I
(SG)
MVC14T3
(14T)
30A
MV1981
30G
30F
MV1981
30D
MV3113
30A
30G
30E
30B
30H -- Collet for SG Shaft
30G - Ball Bearing 5x10x4mm -- 2
Step 31
30I - Engine Nut for SG Shaft
Exhaust Header
MV2060BA
MV2060BA
MV2053
MV2060BA
MV2053
MV2060BA
MV2053
Step 30
24
Step 32
Flathead Screwdriver and Clutch Tool
<Assemble Clutch Shoes>
Use Flathead Screwdriver
1
X3
2
Use Clutch Tool
1
X3
2
3
<Disassemble Clutch Shoes>
Use Flathead Screwdriver
X3
25
Step 33
Clutch Tool
<Assemble Clutch Shoes>
Use Clutch Tool (Option Part - SET007)
X3
1
2
<Disassemble Clutch Shoes>
Use Clutch Tool (Option Part - SET007)
X3
26
Step 34
Air Filter Mounting
34A - F/H Tapping Screw 3x8mm --1
MV2031Y
Step 34-1
MV2031Y
Step 31
SE120 - Air Cleaner Oil
(Option Parts - Not Included)
34A
MV2031Y
MV2031Y
MV2031Y
(MV2032)
<34-1>
27
Step 35
Engine Mounting
Step 34
! Make sure you can still slide your
engine, then please Insert a sheet
of notebook paper to set the clutch
bell pinions with the main gear mesh.
The correct gear spacing is when
the pinion is close to the main gear,
but if you hold the clutch bell, you
should still be able to rock the main
gear back and forth slightly with
light pressure. Roll the gears and
check the mesh in several different
locations on the main gear.
Then, tighten the four button head
machine screws.
Step 29
35A
35A
35A - Button Head Machine Screw w/Threadlock 5x10mm -- 4
28
Step 36
Steering Linkage Mounting
36C - Button Head Machine Screw 3x12mm -- 1
36A - Lock Nut 3mm -- 1
36B - Flanged Lock Nut 3mm -- 1
36D - Cap Screw 3x18mm -- 1
36E - Grub Screw 3x16mm -- 1
36C
MV1302
MV1302
36A
MV1302
36E
Servo Arm
(Included with Servo)
MV1302
<36-1>
Step 35
36D
Step 36-1
Retaining Screw
(Included with Servo)
36B
29
Step 37
Throttle and Brake Linkages
37C - Button Head Tapping Screw 3x12mm -- 1
37A - Grub Screw w/Threadlock 3x3mm -- 6
37B - Spring 8.3mm -- 2
37D - Spring 18mm -- 1
37A
70mm
SE002
SE0031Y
SE002
37D
MV12605
SE0031Y
15mm
24mm
<37-1>
37A
37A
80mm
MV12605
SE002
36A
MV12605
37B
SE002
SE002
37B
MV12605
<37-2>
37C
Step37-2
Step 37-1
Servo Arm
(Included with Servo)
30
Step 38
Throttle and Brake Linkages Mounting
38A - Grub Screw w/Threadlock 3x3mm -- 2
38A
Retaining Screw
(Included with Servo)
Step 35
Step 37
! Make sure the servo is in the neutral position.
First through the Brake linkage into the brake
pin, Install the servo arm to the servo and
tighten the retaining screw. Then, push the
ball end onto the engine carburetor ball stud.
10mm
32mm
31
Step 39
Fuel Tank Mounting
39C
Silicone Tubing
6mm
XV3031
Silicone Tubing
39A
39A
39D
(MV308)
39D
(MV308)
Silicone Tubing
50mm
Step 38
39B
39B
39A - Washer 3x8X1mm -- 2
39B - F/H Machine Screw w/Thread 3x8mm -- 2
39C - Washer Head Machine Screw w/Thread 3x10mm -- 2
32
39D - Post 6x32mm -- 2
Step 40
Muffler
40B
Step 40
SE009Y
MV12605
SE009Y
40C
MV3769BA1
40A
40A - Grub Screw w/Threadlock 5x5mm -- 1
40C - Flanged Lock Nut 3mm -- 1
40B - Button Head Machine Screw 3x12mm -- 1
33
Step 41
Throttle and Brake Linkage Adjustment
High Throttle
Full Brake
Throttle
Step 42
Fuel Pick-Up Tubing and Pressure Tubing Mounting
Fuel Pressure Tubing
Fuel Pick-Up Tubing
! Before installation, please
check that fuel pick-up tubing
and pressure tubing are free
from debris and not blocked.
Step 40
34
Step 43
Receiver, Servo and Battery Install
Servo
(CH2)
Battery
Receiver
CH1
(Steering)
CH2
(Throttle/Brake)
BATT
Switch
CH. 1
CH. 2
CH. 3
BATT
Servo
(CH1)
Step 44
Receiver
Antenna Support Tube Mounting
Antenna Support Tube
! Slide the antenna through the antenna
support tube, then push the antenna
support tube into the antenna mount.
Receiver
! DO NOT cut the excess antenna shorter.
Allow the excess antenna wire to hang out
beyond the end of antenna support tube.
35
Step 45
Roof Plate Mount
45A
45A - F/H Machine Screw w/threadlock3x8mm -- 4
45A
45A
45A
MV1683AL
MV1683AL
MV1672
MV1672
Step 46
Rear Center Roll Bar
MV1673
46A
46A
46A
Step 46-1
MV1685AL
<46-1>
46A
MV1673
Step 45
46A - Button Head Tapping Screw 3x8mm -- 4
36
Step 47
Front Center Roll Bar
MV1671
47B
MV1671
MV1681AL
MV1671
Step 46
47A
MV1671
47A
<47-1>
Step 47-1
47A - Cap Screw w/Threadlock 3x10mm -- 2
47B - Button Head Tapping Screw 3x8mm -- 2
Step 48
Roof Plate
48A
48A
MV1675AL
Step 47
48A - Button Head Tapping Screw 3x10mm -- 4
37
Step 49
Center Roll Bar and Rear Roll Bar
49A
Step 48
MV1684AL
49A
MV1686AL
MV1682AL
49A
49A - Button Head Tapping Screw 3x8mm -- 6
38
Step 50
Roof Plates Mounting
50A
50A
Step 49
50B
50A
50A
50B
50A
Step 43
50A - Button Head Tapping Screw 3x8mm -- 6
39
50B - Lock Nut 3mm -- 2
Step 51
Wheels and Tires
Inside
Outside
Instant Cement
(Not Included)
D08B04S
! Apply instant cement into
the groove of the wheel.
C08B02BA
D08B04S
! Use small amount instant cement into the
groove of the wheel. Make sure the tire is
secure on the wheel.
Step 52
Wheels Plate Mounting
52A
C08A02AL
For Right and Left Sides (x4)
52A
52A - Button Head Machine Screw 3x6mm -- 24
40
Step 53
Wheels, Body and Wing Mounting
MV120
MV120
BODY
MV120
MV120
MV120
MV1201
MV375BA
53A
Step 52
Step 50
53A
Step 52
53A - Wheel Nut 17mm -- 4
41
Fast Takedown - Main roll Bar
PULL
50A
50A
50A
50A
50A
50A
42
Fast Takedown - Engine
Step 6
Pull Out
PULL
Step 5
Extraction
Step 4
Extraction
Step 3
Pull Out
Step 1
35A
Step 2
40A
43
Fast Takedown - Rear Suspension
Step 3
29C
Step 4
Pull Out
PULL
Step 1
29A
Step 2
29B
44
Step 1
29A
Fast Takedown - Transmission
Step 2
26B
Step 2
26B
Step 5
Pull Out
PULL
Step 4
38A
Step 3
26C
Step 3
26C
Step 1
26A
45
Fast Takedown - Full Tank
PULL
Step 3
Extraction
Step 1
39B
Step 1
39B
46
Step 2
Extraction
Fast Takedown - Radio Tray
PULL
Step 3
Retaining Screw
Step 1
25A
Step 1
25A
Step 1
25A
47
Step 2
Retaining Screw
Fast Takedown - Front Suspension
Step 3
28E
Step 3
28E
Step 4
28C
PULL
Step 5
Pull Out
Step 2
27B
Step 1
27A
48
1/8 NITRO CAGE CAR REPLACEMENT PARTS LIST
BB0306025
BB0508025T
Ball Bearings 3x6x2.5mm
BB050825
Flanged Ball Bearings 5x8x2.5mm
MV309
MV3062
Brake Disc
L=14.2mm
Shock Mounting Studs
MV1201
L=80mm
Body Clips Type "R"
MV310
Servo Mount Set - Throttle
Servo Saver Plastic Parts
L=67.5mm MV112
MV11101
MV11711
SE0031Y
Servo Saver Screw Set
L=36mm MV1173
L=36mm MV11721
Brake Output Joints
Servo Saver Metal Parts
MV3074
Balls - Steel 6.9x4.9mm
Lower Hinge Pins
Bumper
MV30731
MV3071
Brake Pad Set
MV110
XV1401
Bushings 6x10x3mm
Ball Bearing 8x16x5mm
Wheel Hubs - Front
Ball Bearing 5x10x4mm
Ball Bearings 5x8x2.5mm
BU061003
BB081605
MV134
BB051004
Pinion Output Joints
Differential Output Joints
MV12605
MV1261
Linkages Rod Set
Plastic Parts Accessories - Yellow
49
L=21mm
Brake Cam
XV1321AL
Front Shock Tower 4mm - Alu
MV1382
Rear Shock Tower 4mm - Alu
Shock Shaft Set - Front 3.5mm
XV1624R1
Chassis Brace - Rear
MV162D4
Suspension Plate Holders
XV1631
Gear Box Halves - Front/Rear
MV1386016
Shock Rebuild Kit
L=80.5mm 33B530AL
MV1393GA
Front Shock Springs 1.6mm - Silver
L=56.2mm MV139011
L=45mm
Front Shock Boby Set - Alu
L=58mm
MV1383GA
Shock Spring Spacer & Bushing Set
MV138011
33B450AL
XV1333AL
Rear Shock Springs 1.6mm - Silver
L=65.7mm 34B102A01
MV1412
MV1411
Wing Mount Stabilizer Rod
SE002
MV30751AL
MV22832
Servo Saver Steering Plate 3mm - Alu
50
Rear Shock Set w/Gray Springs
Front/Rear Suspension Plate - Alu
V221524
Rod Stopper Set
Chassis Brace - Front
L=130mm
MV162D5AL
Wing Mount
XV1625F1
Rear Shock Boby Set - Alu
L=112.5mm 34B120A01
Front Shock Set w/Gray Springs
Shock Shaft Set - Rear 3.5mm
L=53mm
L=22.5mm
Ball Ends - 4mm for 7mm Ball
XV162U1AL
Spur Gear - 48T
Front Upper Suspension Plate - Alu
XV13401
MV22873
XV162U2AL
Suspension Holder Supports
MV22821
MV1657
Rear Suspension Arms - Lower
MV3551
Servo Mount Set - Steering
MV3491
XV347R1
MV3574
CVD Universal Joint Rebuild Kit
MV22873FR1
Differential Assembly "Front/Rear"
- Complete
L=25mm MV3492
L=36mm XV349R1
L=117mm MV3562
XV3613
Rear Suspension Arms - Upper
L=93mm MV3575
Rear Dog Bones - Axles
Engine Mounts
XV347F1
Centre Differential 48T - Complete
Front Suspension Arms - Lower
51
L=124mm
CVD Universals
MV227542
MV3113
Sway Bar Set - 2.8mm
MV22873M48
Rear Hubs - Left/Right
Rear Turnbuckles 5mm - Upper
Front Dog Bones - Centre
Ring Gear - 43T
MV3462
Body Mount
Front Turnbuckles 5mm - Upper
L=97.8mm MV3561
Rear Dog Bones - Centre
Differential Set - Bevel Gears
Rear Sway Bar Plate 3mm - Dark Alu
MV3103
Pinion Gear - 13T
MV22811
Gaskets for Bevel Differentials
XV349F1
Front Suspension Arms - Upper
XV3041
MV11303
Centre Differential Mount
Chassis 3mm 6061 - Alu
Main Gear Plate 3mm - Alu
MV1681AL
L=130mm MV1685AL
Front Center Roll Bar Side - Alu
MV1684AL
Roll Bar Mount Set
Rear Roll Bar Left/Right Side (2pcs) - Alu
Rear Center Roll Bar - Alu
Side Guard Left - Alu
MV1682AL
Center Roll Bar Side (2pcs) - Alu
Roof Plate - Alu
Main Roll Bar Side (2pcs) - Alu
Roof Plate Mounts
Roll Bar Stopper Set
MV1241
Clutch Shoes And 1.0mm Springs
Engine Mount Spacers 4mm - Alu
52
L=56.8mm
L=274mm MV1675AL
MV1671
MV3114AL
MV1674
L=80mm
L=89mm MV1683AL
L=40.2mm MV1672
Rear Upper Roll Bar Side (2Pcs) - Alu
Side Guard Right - Alu
MV1686AL
Radio Plate 2mm - Alu
Receiver Case
Body Clips Type "R"
MV3002LAL
MV3002RAL
XV30221AL
MV37412
L=27mm
Servo Sarer Plate 4mm - Alu
7x3mm Ball with Flange
MV30427AL
MV30101AL
MV120
L=12.5mm XV30762AL
MV1673
Roll Bar Connectors
MV36304
Flywheel 3-Shoe Clutch - 39mm
L=32mm MV2031Y
MV308
Fuel Tank Post
MV2060BA
MV2032
Air Filter Assembly - Yellow
C08B02BA
Clutch Bell - 14T
BODY200825-CLEAR
BODY200825P1-GREEN
BODY200825P2-RED
Wheel Plate Aluminium
MV113
MV3769BA1
MV105
Wheel Shafts
MV204P
Clutch Nut For 3 - Shoe Clutch
53
Bi-Level Wing - Black
L=48mm MV1302
Steering Rod Set 4mm (Tie-Rods)
Clutch Shoes And 1.0mm Springs
Fuel Tank - 125c.c.
MV375BA
Linkage Tuned Pipe - Black
MV1301
MV1981
Ball - Steel 7x3mm
XV3031
Desert Tire+Circle Wheel Black+Insert
+Wheel Plate Aluminium w/Glued
Exhaust Coupler - Yellow
Body
Desert Tire
D08B04SBA02AL
SE009Y
MVC14T3
D08B04S
Hex Hubs 17mm
Exhaust Spring
C08A02AL
Circle Wheel Black
Wheel Nuts
Air Filter Elements
MV107
MV2053
Rear Adapter
MV106
Steering Servo Rod Set
XV11304
Balls For Suspension - Steel 4x10mm
ONB3X1
XV3611
Sway Bar Mount
MV1592
WWACO8X12
O-Rings for Differential Output Shafts
L=22.5mm
Ball Ends - 3.5mm for 7mm Ball
54
Differential Shimes - 8x12x0.2
WWACO8X12X0.4
Differential Shimes - 8x12x0.4
1/8 NITRO CAGE CAR OPTION PARTS LIST
MV2252
2-Speed Conversion Kit
2-Speed Clutch
MV3131
2-Speed Clutch Bell w/o Pinion Gear
Pinion Gear - 21T
MV22822
Clutch Bell - 16T (Single Speed)
MV3161(Use w/MV3131)
MVC13T3
Clutch Bell - 13T (Single Speed)
Spur Gear - 46T
MVC17T3
Pinion Gear - 19T
2-Speed Gear - 50T
2-Speed Gear - 45T
MV22831
MV3193(Use w/MV3131)
MV22812
MV0501
MV0451
2-Speed Pinion Gear - 12T/17T
Pinion Gear - 16T
Pinion Gear - 14T
Pinion Gear - 13T Steel
MVC16T3
2-Speed Clutch Bell for 12T/17T
Pinion Gear
2-Speed Clutch Bell - 12T/17T
2-Speed One-Way Mount w/Bearing
MV312171
MV3132
MV3143(Use w/MV3131)
MV3211(Use w/MV3131)
2-Speed Clutch Housing
2-Speed Main Gear Shaft
MV31217
XV3333
MS3332
MS3331
MV0472
MVC18T3
Clutch Bell - 17T (Single Speed)
Clutch Bell - 18T (Single Speed)
55
Ring Gear - 43T Steel
MVC15T3
Clutch Bell - 15T (Single Speed)
MV197
Engine Nut Assembly - O.S.
SEM1982GR
SEM138301
SEM2033
Prefilter Sleeves
3-Shose Clutch Shoes - 7075
L=58mm MV1383B14
Front Shock Spring Set
L=58mm
Front Shock Spring 1.4mm - Blue
MV1383BA
MV1393BA
Front Shock Spring 1.7mm - Black
Rear Shock Spring 1.7mm - Black
MV1383R13
MV1393R13
Front Shock Spring 1.3mm - Red
Rear Shock Spring 1.3mm - Red
MV1383Y
MV1393Y
Front Shock Spring 1.6mm - Yellow
Rear Shock Spring 1.6mm - Yellow
SEM139301
L=80.5mm
MV1393B14
Rear Shock Spring Set
Rear Shock Spring 1.4mm - Blue
MV1387B
SEM1170BA
Shock Bump Stops - Blue
CVD Dust Boots - Black
MV1387
SEM1170B
CVD Dust Boots - Blue
Shock Bump Stops - Yellow
MV1385
MV204
Dust Boots - Shock Shaft
SEM3492
L=48mm SEM3491
SEM130
Engine Nut - for S.G. Shaft
Linkage Manifold
Linkage Tuned Pipe
SE009B
Exhaust Coupler - Blue
XV2036BA
SE009R
Exhaust Coupler - Red
Air Filter Assembly - Black
SE009G
XV2036Y
Exhaust Coupler - Green
Air Filter Assembly - Yellow
SE009P
Exhaust Coupler - Purple
SE009PN
L=25mm
Titanium Turnbuckles (Tie-Rods) 4mm Front Titanium Turnbuckles 5mm - Upper
MV3764G
L=36mm MV2054G
Rear Titanium Turnbuckles 5mm - Upper
SE009BA
Exhaust Coupler - Black
L=80.5mm
XV2036B
Exhaust Coupler - Pink
Air Filter Assembly - Blue
56
SE030B
Silicone Switch Cover - Blue
SE030BA
Silicone Switch Cover - Black
SE030R
Silicone Switch Cover - Red
SE030
SE096
Fuel Filter
SE111
Silicone Shock Oil - 100Wt.
SEG030
Silicone Differential Oil - 30K Wt
SE110
SE030Y
Silicone Switch Cover - Red & Yellow
Silicone Switch Cover - Yellow
SE120
SE112
SEG010
Air Filter Oil
Silicone Shock Oil - 200Wt.
SEG050
SEG070
Silicone Differential Oil - 50K Wt
Silicone Shock Oil - 40Wt.
Silicone Differential Oil - 70K Wt
Silicone Differential Oil - 10K Wt
SEG100
Silicone Differential Oil - 100K Wt
SEM1341BA
Front Steering Hubs - Black
SEM1341H
Front Steering Hubs - Hard Anodize
SEG200
Silicone Differential Oil - 200K Wt
XV3612
SEM1341B
Front Steering Hubs - Blue
Front Sway Bar Set 2.5mm
SEM162D5H
Front/Rear Suspension Plate - Hard Anodize
SEM162D5R
Front/Rear Suspension Plate - Red
SEM162D5GR
Front/Rear Suspension Plate - Green
MV162D5BA
SEM162D4C2
Front/Rear Suspension Plate - Black
SEM162D4H
SEM162D4C3
Rear Suspension Holder 2o - Hard Anodize Rear Suspension Holder 3o - Hard Anodize
SEM162D6
SEM349FR0
SEM349FR2
Front Suspension Holder - Hard Anodize Suspension Holder Support - Hard Anodize Upper Suspension Plate 0o - Hard Anodize Upper Suspension Plate 2o - Hard Anodize
57
MV1624R42
SEM349FR3
Upper Suspension Plate 3o - Hard Anodize
SE285
Rear Chassis Brace
Micro Corner Markers - Yellow
MV30751BA
Racing Cones for Micros - Red
SEM30751C
Servo Saver Steering Plate 3mm - Black
SEM3071BA
Alu Servo Saver w/Bearings - Black
Servo Saver Steering Plate 3mm - Carbon
MV30751R
SEM3071H
Servo Saver Steering Plate 3mm - Red
Alu Servo Saver w/Bearings - Hard Anodize
SEM30751H
SEM3071B
Servo Saver Steering Plate
4mm - Hard Anodize
SEM159135R
(Use with 3.5mm Shock Shafts)
Wrench 17mm
Clutch Tool - Adverse
SE93020R
SE93010Y
Tool Set
SE095
SET007
SEM1591
Alu Ball Bearing Shock Studs
- M3.5x0.6mm
Alu Servo Saver w/Bearings - Blue
SEM15914L
SEM15911
Foam Dust Pads
Ball End Mount
Alu Ball End Left - M4x0.7mm
SEM106BA
Wheel Nuts w/Nylon Lock - Black
SEM106TA
Wheel Nuts w/Nylon Lock - Titanium
SEM106S
Wheel Nuts w/Nylon Lock - Silver
SEM15914R
SEM106WA
Nylon Washer
Alu Ball End Right - M4x0.7mm
MV107
Wheel Nuts w/Nylon Lock - Blue
MV107B
MV106B
Hex Hubs 17mm - Blue
Wheel Nuts - Blue
MV107BA
MV106BA
Hex Hubs 17mm - Black
Wheel Nuts - Black
MV107Ti
MV106Ti
Hex Hubs 17mm - Dark Titanium
Wheel Nuts - Dark Titanium
MV107R
Hex Hubs 17mm
SEM106B
MV106
Hex Hubs 17mm - Red
MV106R
Wheel Nuts
58
Wheel Nuts - Red
C08B02GA2
C08A02RE
Circle Wheel Silver
Wheel Plate Red
C08B02GA
C08A02BL
Circle Wheel Light Silver
MV3693S
Wheel Plate Blue
D08B03S
Buggy Tires - Square w/Inserts
D08B04S
Tyre - Multi Spike
Tyre - Road Rage
Sand Tyre
Tyres - Digger With Foam
Rally Tyres
MV3692S
MV093S
DO8B01S1
D08B02S
MV37001BA
Desert Tire
MV37001W
MV37002W
5-Claw Wheels - White
Blade Wheels - White
MV37001Y
MV37002Y
5-Claw Wheels - Yellow
Blade Wheels - Yellow
5-Claw Wheels - Black
MV37003BA
MV37002BA
Blade Wheels - Black
10-Claw Wheels - Black
MV37003W
MV37004Y
10-Claw Wheels - White
Dish Wheels - White
MV37003Y
MV37004W
10-Claw Wheels - Yellow
Dish Wheels - Yellow
MV37004BA
Dish Wheels - Black
MV375W
XV3751Y
Bi-Level Wing - White
Bi-Level Wing - Yellow Type "S"
MV375Y
XV3751W
Bi-Level Wing - Yellow
Bi-Level Wing - White Type "S"
XV3751RE
Bi-Level Wing - Red Type "S"
MV375RE
XV3751BA
Bi-Level Wing - Red
Bi-Level Wing - Black Type "S"
59
SRGV100
SR100
SET0202
Electric Starter Set
Fail Safe
Battery Level Indicator
34C450HA06315WH
Shock Set - C Type (Hard Anodize)
34C530HA08315WH
Shock Set - C Type (Hard Anodize)
60