Hydrocarbon Processing Industry Concept

HPI
Hydrocarbon Processing Industry Concept
Jotun companies in
67 countries
40 production facilities
globally
More than 5,300 employees
Worldwide service
and support
Jotun Protects Property
l With over 25 years experience in the HPI industry, with millions of square metres protected and hundreds of
projects completed, Jotun has built a strong reputation for innovative products and superior customer service.
l Jotun is at the forefront of developments in corrosion protection for hydro-carbon processing facilities, storage tanks
and petro-chemical installations.
l A product range that is continuously upgraded to face ever more demanding protection requirements, to meet new
and more stringent regulations and to reduce environmental impact.
l A truly multinational giant in the global coatings market comprising 67 companies and 40 production facilities on
five continents.
l Jotun’s plants meet ISO quality control requirements and many specialist products are manufactured to exacting national and industrial standards.
l The product range can provide corrosion protection but also cosmetic appearance with a virtually unlimited range
of topcoat colours.
l The Hydrocarbon Processing Industry (HPI) is very diversified. No two projects are alike. Jotun therefore treats each
project on a case-to-case basis and incorporates its HPI concept into the solution offered.
2
Case History
Kashagan Development
North Caspian
Case History
OGD 3rd NGL Project
Onshore Abu Dhabi
The Kashagan development in the North Caspian
Sea comprises onshore and offshore production
facilities with 2 exploration sites.
The Onshore Gas Development (OGD) III is a $1.5
billion project to expand production of the oil and
gas fields in Habshan, Abu Dhabi.
Jotun was chosen as one of the main coatings
suppliers and to date has supplied in excess of
$14 million worth for pipe racks and production
Jotun supplied coatings with a contract value of
$2.5 million for use in this project.
Jotun also supplied coatings for the ASAB Gas
Development (AGD) Phase II Onshore. Coatings
were supplied by Jotun as global sole supplier
to the engineering and construction contractors,
Bechtel.
barges.
Jotun’s HPI concept
TIME + ENVIRONMENT + SAFETY = ECONOMY
3
Jotun’s HPI concept
TIME + ENVIRONMENT + SAFETY = ECONOMY
TIME
TIME
l The development of quicker coating processes means
downtime is reduced and the facility is back in service
faster.
+ENVIRONMENT
l Savings in costs and potential improvements in
profitability. These benefits are linked to the correct
choice of advanced yet economical coating systems.
l Jotun Coatings will help choose the most suitable
+SAFETY
coating systems designed to offer lasting protection,
ease of application, shorter curing time and
unrivalled life cycle cost advantages and will pay real
dividends, year on year.
= ECONOMY
4
ENVIRONMENT
SAFETY
l Environmental awareness and legislation is increasing.
l Safety is a major consideration.
l The EU has introduced stronger VOC legislation whilst
l It is essential to choose coatings which more than meet
in the Middle East and Far East there is increasing
current VOC legislation, e.g. water-borne and high
awareness of environmental considerations.
volume solids products are an example.
l Jotun has experienced great success introducing new
environmentally acceptable products to meet both
present and proposed legislation.
l WaterFine systems offer protection that is equal or
l Careful coating selection will contribute to improving
safety and working conditions.
l Project management is easier with safety of the site and
its personnel being improved.
better than high performance solvent-borne coatings
with cost and environmental benefits.
5
TIME
+ENVIRONMENT
+SAFETY
Before and after contract award –
providing a comprehensive technical support function
The foundations for major cost savings, better coating life cycle and
Team No.1
specifications and plan the actual
the life cycle of structures and assets
Jotun provides an unrivalled
coating work. They ensure surface
that are currently coated or will be
comprehensive technical support
preparation and application are to the
coated to enhance their maintenance
function. At every Jotun location
standards which secure lasting corrosion
cycle capability.
worldwide there are highly trained and
protection with minimum maintenance.
l Firstly the condition of the site
experienced coatings specialists working
6
should be established.
as a team, in close communication, both
Jotun Asset Management
Programme (JAMP)
together and with their customers.
The aim of JAMP is to avoid, wherever
Technical service personnel are certified
possible, unplanned costly shutdowns
to Frosio or NACE certification
which are the result of coating problems.
standard. They provide coating
JAMP is a pro-active method of asset
long term cost effective corrosion
design advice, site surveys, written
management designed to help maximise
protection coating systems.
l The programme then allows the client
and Jotun to function as a team.
l A maintenance programme is
prepared for implementation on a
priority basis of 4 phases to provide
Regional laboratories in China, Korea, Malaysia and U.A.E, work closely
together with the central research and development complex in Norway (left)
Jotun Paint School –
combining theory with practical training
more effective site management
education and training for management,
Worldwide R&D
consideration many of the issues
technical support staff and corrosion
A team of scientists at the central
related to planned maintenance of a
engineers for construction facilities,
laboratory in Norway and at regional
plant in operation or at shutdown. The
contractors, engineering consultants and
laboratories in China, Korea, Malaysia,
coating systems suggested take into
industrial companies. It has proved to
USA and UAE, work together. They
consideration all of the relevant facts.
be very successful, increasing product
combine the strengths of state-of-the-art
knowledge, improving communication
technology and innovative thinking with
and understanding of common problems
practical knowledge and experience to
and their solutions.
ensure Jotun coating systems work in all
l The programme takes into
Providing Education and Training
Education and training are an integral
part of Jotun activities. Jotun Paint
climates and locations.
School is an established system for
Jotun’s HPI concept
TIME + ENVIRONMENT + SAFETY = ECONOMY
7
Internal tank linings
Jotun’s HPI concept – Internal tank linings
Corrosion, erosion, contamination
Any decisions made will contribute toward determining the
The three deadly enemies of storage tanks are
economics of its maintenance for many years.
corrosion, erosion and contamination. The Jotun range
l Specification of the product chemical to be stored
of innovative products for internal surfaces combines
advanced technology with practical knowledge to offer
unique formulations designed to combat these enemies.
Establishing a firm basis for effective coating choice
Your Jotun coatings advisor will find the following
factors useful when discussing the choice of the most
effective coating system for a given structure.
8
and is this likely to change in the future
l Chemical formulae and concentration %
l Expected storage temperature range of the product
l pH levels
l Maintenance and life cycle requirements
l Floating or fixed roof tank
Internal tank linings
What to look for?
Surface preparation
New steel tanks may have mill scale remaining on the
Surface preparation is the single most important
surface which will have poor adhesion to the surface.
factor for the success or failure of a coating system.
Before coating, this must be removed using abrasive
Experience has proved that even the best coating will
blast cleaning.
fail on an inadequately prepared surface.
For interior surfaces, any shopprimer would normally
be removed. Existing tanks may require considerable
The importance of code of practice guidelines and
working procedures
preparation and will need close inspection for signs
Comprehensive application and code of practice
of corrosion.
guidelines have been compiled by Jotun for all its
coating systems. These are available on CD on request
from your nearest Jotun office. The guidelines provide
guidance on achieving both the mandatory standards
for surface preparation and coating application.
Jotun working procedures should be consulted prior
to undertaking any coating application and if required
further technical advice sought from the Jotun coating
advisor before commencement of product application.
The ultimate result of poor corrosion protection
Dushanzi Refinery, China. Jotun is one of the main suppliers to the project.
9
Internal tank linings
Jotun’s HPI concept – Jotun’s key internal tank linings
Jotun internal tank linings
These products will protect the internal surfaces of the
The Jotun range of internal tank linings enables a
tank from corrosion and will also protect the stored
coating to be selected specifically for the environment in
product from contamination.
which the tank operates and the product stored.
They will also meet current and proposed VOC and
emissions-related environmental legislation.
Common product features and benefits
TIME & ECONOMY
HEALTH, SAFETY & ENVIRONMENT GENERAL
l Light colours for easier, quicker
l VOC compliant
l High volume solids
l Reduced or no solvent emission
l High build coatings
l Reduced explosion and fire risk
l Abrasion resistant
l Light colour for ease of inspection
l Resistant to a range of petroleum
inspection and cleaning
l Ease of application –
standard airless spray
l Fast recoating time
products & chemicals
l Extended life cycles –
l Short curing time
reduces maintenance operations
l Reduced down-time
l Resistant to elevated temperatures
l Reduced down-time means
less site HSE risk
l Extended life cycle
l Reduced long term maintenance costs
l Overall savings in time and economy
The safe storage of Bio Fuels
Chemflake Special – One coat and finished
There are many solutions for coating tanks for the
storage of Biodiesel, from phenolic epoxies to vinyl ester
systems. However there is a need to be careful as to the
actual formulation of the stored product.
Recommended systems
For Biodiesel within the specifications related to:
Application of Chemflake Special
ASTM D 6751 / EN 14214:2003
the following system can be used:
Product
Number
of coats
microns
per coat
Tankguard HB
3
100
or Tankguard Storage
2
150
If these limits are exceeded, or the user wishes to build
in security for future Biodiesel specification changes,
Jotun recommends the following system:
Product
Chemflake Special
10
Number
of coats
microns
per coat
2
750
Final inspection. Ready in 72 hours
Internal tank linings
Tankguard SF
Tankguard 412
Tankguard Storage
Solvent Free Novolac Phenolic Epoxy Tank Lining
Solvent free epoxy
Phenolic epoxy
l Meets the applicator and operators needs
l Solvent free technology
l Flexible DFT range 125–200µm
l Solvent free technology
l No solvent entrapment
l User friendly
l High build system 1–2 x 500µm
l Easy to apply – 2 coat system can be applied
in 1 day
l Reduces maintenance downtime
l Can be applied by standard airless spray
l Extended over-coating – 30 days allows for delays
l Can be used in concrete bund protection
l Good curing times – shorter down time
l No shrinkage
l Self as holding primer maintains system integrity
l Resistant to a range of petroleum products
l Def Stan 80/97 certificate for jet A1 storage
l Crude oil up to 60ºC
l Spanish equivalent of Mil
l Potable Water BS 6920
l Spec 4566E for jet A1 storage
l Pit filling capability
l Chemicals 70°C
l VOC compliant to current European l Crude oil 95°C
l Quick and easy to apply
l Speeds up the coating process
l Short application time
l Cures down to 10ºC
l No special spray equipment needed
l Brushable for stripe coats
l Promotes safer working practices
legislation
l Low VOCs
With Tankguard SF controlled viscosity
allows standard airless spray application
Viscosity is a clear indicator of spray-ability.
The thicker the coating the harder to spray, so
clearly it is important that the starting viscosity is
as low as possible and that it does not develop
too quickly.
Chemflake Special
Solvent-less vinyl ester glass flake
l Ultra high build range up to 600–750µm per coat
l Water 95°C
Estimated costs ‘like for like’ specification
Materials Application Cure days
1 2 3 4
EPOXY
5
6
7
8
9
10
l Pit filling capability
l Re-coat after 2–3 hours
CHEMFLAKE
l Rapid cure – tank in commission 72 hours
l 1–2 coat system
l Acid resistant
l Resistant against crude oil up to 95°C
l Temperature resistance 85°C in water
l Diverse track record
l VOC compliant to current European legislation
Chemtech GM Clear
With Tankguard SF slower hardness
development gives longer overcoating
time
Rapid hardness development would normally
be considered a positive attribute, however with
solvent free coatings, recoatability is challenging.
Tankguard SF has been designed to have slower
hardness development providing a longer
overcoating window, making multi coat systems
more secure than other solvent free tank linings.
Materials Paint, thinner, consumables
Labour Applicators, stand by man
Plant DH compressors, fuel, transport, etc
Site services Fire, safety, medical,
PTW (permit to work) system
Resist 5 WF
Water-borne inorganic zinc silicate
l One coat system
l Flexible DFT range 100–200µm
Solventless epoxy hand lay up system
l Less dry spray
l Solvent free technology
l Over-coat with itself even after prolonged curing
l Good wetting properties
l Thin and clean with water
l High bond strength
l Reduced risk of mud-cracking
l Crude oil up to 75°C
l Excellent track record
l High flexural strength
l 20 year track history
l Last resort option for extending the life of tank
l Capable of filling major pittings and small holes
l 75% volume solid
l Cures harder than solvent-borne silicates
l VOC compliant
l Conductive
Resist GTI
Solvent-borne ethyl silicate based zinc rich coating
l Crack bridging capability
l One coat system
l Tank in Tank concept
l 100µm DFT
l More economical than tank l Lining for solvents including methanol
and ethanol
floor replacement
l Low maintenance
l Excellent track record
l 67% volume solid
l VOC compliant
l Conductive
11
Internal tank linings
Jotun’s HPI concept – protecting steel substrates
Jotun offers a wide range of internal linings to meet all
systems can be used. A discussion with a Jotun coatings
tank protection needs. The typical systems described
advisor is recommended prior to choosing a particular
are intended as guidelines as many combinations of the
system.
Steel substrates
Vol. solids
%
Dry film
range µm
Number
of coats
Resist GTI
67
75–100
1
Anticorrosive lining for protection of chemical tanks.
Solvent resistant, petroleum products with methanol/alcohol
with pH 6–10
Resist 5 WF (Water-borne)
75
125
1
Anticorrosive lining for protection of chemical tanks.
Solvent resistant, petroleum products with methanol/alcohol
with pH 6–10
Tankguard HB
50
100–150
2–3
Chemicals, sewage, water, AV fuel, crude oil 60ºC, condensate
Jotacote Universal
72
150–250
2
Water, crude oil 60ºC
63
125–200
2
High chemical resistance, water, crude oil at 95ºC,
AV fuel (DEF STAN 80/97), sewage
100
200–500
1–2
80
200–400
1
Penguard Primer
51
50
1
Chemtech GM Clear + GRP Matt
100
1000–3000
2–3
Crude oil 60ºC
96
600–1500
1–2
Crude oil 95ºC, wide range of chemicals, acids and alkalis at
elevated temperatures
96
600–1500
1–2
Crude oil 60ºC
Section
Main use
Thin film
Zinc Silicate
Pure Epoxy
Phenolic Epoxy
Tankguard Storage
High build coatings
Pure Epoxy
Tankguard 412
(If one coat min 300 µm)
Crude oil 60ºC, clean petroleum products, potable water,
BS 6290
Glass Flake Epoxy
Marathon
Sewage waste, crude oil 60ºC
GRP Matt Epoxy lay-up
Ultra high build coatings
Vinyl ester
Chemflake Special
Polyester
Baltoflake
For full details please refer to Jotun product resistance lists
12
Internal tank linings
protecting concrete containment bunds
Concrete linings and containment bund coatings
Section
Vol. solids
%
Dry film
range µm
Number
of coats
Main use
Epoxy high build high solid
Penguard Clear Sealer
50
44
1
Marathon
80
250–400
1
Penguard Clear Sealer
50
44
1
Tankguard 412
100
250–500
1–2
Chemclear
96
200
1
Chemflake Special
96
600–1500
1–2
Silos, tank pools, crude oil bunds
Silos, tank pools, crude oil bunds, potable water, BS 6920
Vinyl Ester
Silos, tank pools, chemical or crude oil bunds
13
External coatings
Jotun’s HPI concept – External coatings
TIME + ENVIRONMENT + SAFETY = ECONOMY
TIME
Successfully combine these three factors and the result can be major
overall cost savings, better life cycle of the coating system and more
effective site management – this is Jotun’s HPI concept.
+ENVIRONMENT
Well protected, well presented
External surfaces of tanks not only need to be well
protected against corrosion but must also be well
presented visually. Jotun achieve these two aims with
+SAFETY
a combination of zinc rich primers, epoxy and epoxy
mastic coatings together with polyurethane or acrylic
topcoats – solvent or water-borne.
= ECONOMY
14
External coatings
Check list – a firm basis for effective coating choice
Common features and benefits
Considering the factors in the check list will serve as a useful basis
TIME & ECONOMY:
when discussing the choice of the most effective coating system
l
with the Jotun coatings advisor. The decisions made at this stage
Ease of application
l
Quick re-coating
l
Full system in one day
will help determine the economics for the maintenance of the
l
structure for many years.
l
Reduced maintenance costs
l
Extended life cycle
l
Overall cost saving of the total coating process
l Type of structure and location
l New construction or old requiring maintenance
Fast turn round time
HEALTH, SAFETY & ENVIRONMENT
l Corrosivity class (ISO 12944)
l
VOC compliant
l Maintenance and life cycle requirements
l
Reduced or low solvent emissions
l Geographic location
l
Extended life cycle reduces maintenance operations
l Climate conditions during the coating period as well as during
l
Reduced down-time means less site HSE risk
the service life
GENERAL
l Consideration of ease of maintenance of the coating system
l
High build coatings
l Life cycle expectations
l
Abrasion resistance
l
Dual surface preparation UHPWJ – abrasive blast cleaning
l
Primers suitable for all generics
l
Hybrid systems possible
15
External coatings
Jotun’s HPI concept – Jotun’s key external coatings
Anticorrosives
Jotun’s anticorrosive category comprises
products which offer long term corrosion
protection. A selection from this category
includes:
Mastic Series
Jotamastic 87
Epoxy mastic
Jotamastic Plus
Epoxy mastic
Jotamastic 80
Epoxy mastic
Jotacote Universal Anti abrasion pure epoxy
Barrier Series Zinc rich epoxy
Resist Series
Zinc rich silicate
Glass Flake Series
Intermediates
Topcoats
Jotun’s intermediate coatings are anti
corrosive primers/intermediate coating
for corrosion protection of various
substrates. A selection from this category
includes:
Penguard Express Series
Jotun’s topcoats offer defence against
the elements including colour stability,
potential stress elements, UV exposure
and give excellent cosmetic appearance.
A selection from this category includes:
Hardtop Series
Penguard Express
Hardtop AS
High solids epoxy
Penguard Express ZP Epoxy pigmented with Hardtop XP
zinc phosphate
Hardtop Flexi
Penguard Express MIO Epoxy reinforced with micaceous iron oxide Alternatives
pigments
Jotaproof Topcoat
Penguard FC
Jotamastic 87 GF Glass flake reinforced epoxy mastic
Marathon
Epoxy glass flakes
Baltoflake
Polyester glass flakes
Epoxy Mastic Coatings
Jotun’s epoxy mastic products are unique.
High surface tolerance, compared to
other modified epoxies ensures deeper
penetration into the substrate, adhesion
is superior and they are moisture
tolerant. They can be applied faster and
more easily on less well prepared surfaces
delivering real savings in time and money.
1. Aged coating in sound
condition prepared to minimum
St 2 (or even moist). Water
jetting prepared surfaces with
early flash rust is acceptable.
2. Jotun epoxy mastic is applied.
Good flow properties for a
smooth, consistent protective
film. Low surface tension gives
excellent wetting properties.
Penetrates deep down into the
aged sound surface.
Polyurethane
High solid polyurethane
Flexible high solid polyurethane
Two pack acrylic
Epoxy finish
WaterFine Topcoat Water-borne acrylic
Colour Management
Jotun’s Colour Management Concept utilises three basic primer colours
which have been developed to ensure optimum hiding power by any selected
topcoat colour. These three colours are buff, light red and turquoise.
By selecting the right primer colour, good hiding power and cosmetic
appearance of the topcoat can be achieved.
Turquoise
primer
Blue
Full hiding
topcoat power
Orange
topcoat
Less hiding
power
Light red
primer
Less hiding
power
Less hiding
power
Buff
primer
Less hiding
power
Full hiding
power
3. The coating penetrates
deeper than any other generic
paint type. Deeper even than
linseed oil.
4. The coating, having penetrated
deep into the substrate, converts
from a liquid coating into a solid
film. It now provides the ultimate
in adhesion, penetration and
corrosion protection.
16
As illustrated above, to achieve full hiding power with a blue topcoat, the correct choice of primer colour is
turquoise. Choosing one of the other colours would be the wrong choice as full hiding power would not be
achieved. To achieve full hiding power with an orange topcoat, buff colour is the right choice.
External coatings
Water-borne
Corrosion Protection at Extreme Temperatures
Jotun’s comprehensive range of water-borne coatings combines long
term corrosion protection with cost and
environmental benefits.
The WaterFine range comprises:
JOTATEMP 650
meaning that maintenance can be carried
Surface tolerant coating
for Corrosion Protection at
Extreme Temperatures
Jotatemp 650 provides corrosion protection
Primers/intermediate coats
DFT µm VOC g/l
Jotatemp 650 is a surface tolerant high
Zinc epoxy primer
WaterFine Barrier
Matrix coating.
50–90
Zinc Silicate
Resist 5 WF
50–200
Acrylic primer
WaterFine Acrylic Primer
Epoxy primer
WaterFine Primer
80–200
117
0
66
build one component Inert Multipolymeric
60
of insulated and non-insulated carbon
steel and stainless steel with dry operating
surface temperatures. These can range from
cryogenic to above 650ºC (intermittent
720ºC) and include cyclic services in
temperatures between -185ºC and 540ºC.
It is especially suited for preventing
Jotatemp 650 does not contain any zinc
Corrosion Under Insulation during
and therefore does not have a shortened life
construction and shut down or low
span caused by the sacrificial effect.
temperature periods. It provides corrosion
protection of structures exposed to extreme
60–125
out without needing to shut down the plant.
high and/or extreme low temperatures.
IDEAL FOR MAINTENANCE
l Surface tolerant
l Application up to 260ºC during operating
Topcoat
Being both surface tolerant and high
Hard glossy acrylic topcoat
WaterFine Topcoat
40–80
build it can be used for high temperature
l No special preparation required
application (hot substrates up to 260ºC)
l No shut down required when painting
119
l No special equipment required
Water-borne systems
NO BREAKDOWN AT EXTREME TEMPERATURES
Single day coating system
The organic elements in Jotatemp 650 do not breakdown at high heat
as they do in silicon acrylics/alkyds where protection provided by the
paint film is reduced – often referred to as the ‘Swiss cheese effect’.
Coating
DFT µm
Time for overcoating
WaterFine Barrier
50
2 hours
WaterFine Primer
120*
4 hours
WaterFine Topcoat
80
Total 250
* System through dry after application of the last layer: 25 hours
Insulation removed from a pipe originally coated with a zinc containing coating.
Zinc has worked but by sacrificing, thus limiting the lifetime of the protection.
17
External coatings
Speciality
Typical external coating systems
The Jotun coating systems described below are examples of the
many available. Your Jotun coatings advisor will discuss your
specific project with you and recommend the most efficient,
effective and economical solution to your exact requirements.
All systems described below are VOC compliant
No.
coats
System Examples
DFT
Jotun offers a wide selection of speciality coatings developed
for extreme surfaces, i.e. areas where mechanical damage and
stress are involved.
Baltoflake
A high build glassflake reinforced polyester coating which
Durability
provides impermeable protection of steel against abrasion and
corrosion however hostile the environment.
C4 High*
1 x WaterFine Barrier
Marathon XHB
1 x WaterFine Primer
An ultra high build glassflake reinforced epoxy coating with
1 x WaterFine Topcoat
3
220
High
1 x Barrier series
excellent impact and abrasion resistance – providing long term
corrosion protection.
1 x Jotamastic 80
1 x Hardtop series
3
240
High
Jotamastic 87 GF
1 x Jotamastic 80
A unique surface tolerant glass flake containing abrasion
1 x Jotamastic 80
resistant coating specially suited for surfaces exposed to hard
1 x Hardtop series
3
250
High
wear and tear.
C5-I Very high (Industrial)*
Case History
Dushanzi China
1 x WaterFine Barrier
1 x WaterFine Primer
1 x WaterFine Topcoat
3
250
High
3
265
High
1
800
High
1 x Jotamastic 87
2
500
High
2 x Jotacote Universal
2
250
High
1 x Resist series
1 x Jotamastic series
1 x Hardtop series
Im 3 Soil Buried tanks*
1 x Baltoflake
1 x Jotamastic 87 Aluminium
*ISO 12944 Corrosivity Category
Atmospheric corrosivity categories/
typical environments
Examples of typical environments in a temperate climate (information only)
Corrositivity:
C4
high
C5-I
very high
(industrial)
Exterior:
Industrial areas and coastal areas with
moderate salinity
Interior
Chemical plants
Exterior:
Industrial areas with high humidity
aggressive atmosphere
Exterior:
Buildings or areas with almost permanent
condensation and with high pollution
Categories for water and soil
18
Category
Environment Examples of environment and structures
Im 3
Soil
Buried tanks, steel piles and pipes
The Dushanzi project is the largest refinery and chemical
plant in China with a 10 million ton per year refining
capacity and 1.2 million ton per year ethylene production
capacity.
Jotun is one of the main suppliers for this project.
External coatings
A selection of references
Country
Client
Abu Dhabi
Takreer
Abu Dhabi
Van omeron
Abu Dhabi
Adma-Opco
Abu Dhabi
Enoc
Abu Dhabi
Zadco
Abu Dhabi
ADCO
Abu Dhabi
Takreer
Abu Dhabi
Takreer
Abu Dhabi
Atheer
Abu Dhabi
Gasco
Abu Dhabi
Agip
Abu Dhabi
Adwea
Abu Dhabi
Imifco
Abu Dhabi
Al Ghurair
Abu Dhabi
ADNOC
Abu Dhabi
ADNOC
Abu Dhabi
Qatar Gas
Abu Dhabi
Gasco
Abu Dhabi
Gasco
Abu Dhabi
Gasco
Abu Dhabi
Gasco
Abu Dhabi
Takreer
Australia
Woodside Energy
Australia
BP
China
Praxair
China Bayer Bayer
China Air liquids China
Shell-CNOOC
China
BP
China Vopak
China Degussa
China
Shell
China Tikko China Dow Chemical China Dowcorning China
Carbot
China Odfjell
China
CNPC China
Dupont Dubai
ENOC
Dubai
Total Fina
Dubai
Star
Dubai
ENOC
Dubai
Aramco
Egypt
Segas
Egypt
BP Segas
Egypt
AMOC
Egypt
Midor
Egypt
Petrobel
Egypt
AGIP
Germany
Dow
Germany
Dow
Germany
Oiltanking
Germany
Oiltanking
Germany
Aramco
Germany
BP
Germany
Bayer
India
Esso Oil
India
Reliance Industries Ltd
Indonesia
Pertamina
Indonesia
Pertamina
Indonesia
Total Fina
Indonesia
Conoco/Caltex
Indonesia
Pertamina
Indonesia
Pertamina
Indonesia
Pertamina
HPI Project Name
Takreer – Unleaded Gasoline / Low Sulphur Gas Oil Project
Van Ommeren / Enoc – Fujairah Terminal Phase 4 Expansion Project
ADNOC – OGD II (Onshore Gas Development – Phase II)
ENOC – Enoc Refinery Jebel Ali Free Zone
ZADCO – Zirku Island Crude Oil Storage Tanks
ADCO – N.E.B (North East Bab) Project
Takreer – Marine Ruwais Jetty Maintenance Project
Takreer – Maintenance of G.U.P (General Utilities Plant)
/ S.H.T (Sulphur Handling Terminal) & Refinery Pipelines
ATHEER – Maqta to Jebel Ali Gas Pipeline
GASCO – Ruwais to Shweihat Gas Pipeline
AGIP Spa/BG/Texaco/ Lukeoil – Karachaganak KPC
Main Works Project
ADWEA – Mirfa Power & Water Project
OMIFCO – Oman LNG Project
Al Ghurair Group – Edible Oil Factory
ADNOC – Ruwais Refinery Expansion Project
ADNOC Borouge Polyethylene Project
Qatar Gas II Development Project Off Shore Facilities
GASCO – 3rd NGL Train at Ruwais (EPC IV)
GASCO – 3rd NGL Train – Ruwais Marine Jetty
GASCO –Onshore Gas Development Phase III (OGD III) (EPC II)
GASCO – Asab Gas Development Phase II (AGD II) (EPC III)
TAKREER – Ruwais Export Facility (IRP) Inter Refineries Project)
Tanks
BP Bulwer Island – Tanks
Gas Cylinder
Bayer Coating System Shanghai Caojing New Plant Phase I & II
Air Liquid (Tianjin) Co., Ltd. Daily Maintenance
Pipe/Tank/Steel structure for Shell-CNOOC Nanhai Petrochemical Plant
Zhuhai BP PTA Plant
Ningbo Vopak Tank Maintenance
Degussa Chemical Shanghai New Plant
Shell Yueyang Coal Gasification
Tikko Chemical Zhangjiagang New Plant
Zhangjiagang Dow Chemical Dragon Plant expansion
Dowcorning Zhangjiagang Co., Ltd
Tianjin Carbot Carbon Project.
Odfjell (Jiangyin)
Dushanzi Refinery & Ethylene
Dupont Jiading High-performance Coating Plant
ENOC/ Fujairah Storage
Total Elf Fina
Star Energy
ENOC
Rabigh Development KSA
SEGAS (Spanish Egyptian Gas Co
LNG –Dimietta
Structural steel and tanks
MIDOR (Middle East Oil Refinary)
Petrobal Platforms
Blayim Petroleum Co. (Agip-Italy Group)
Dow Chemicals, Stade
Dow Chemicals, BSL Schkopau
Oiltanking, Tankfarm Hamm
Oiltanking, Tankfarm Berlin
Sharq- Project ( Saudi Arabia )
Heat exchanger systems for Aljubai Sharq, Ingra,
BP-Mouth 3, Tasnee
Bayer Werke Leverkusen
Oil Refinery
Pipelines/Jetties
Pertamina Balikpapan
Pertamina Talisma Tanjung Tanks Project
Total Indonesie
Tank linings
Pertamina Plumpang
Pertamina Cikampek
Pertamina Boyolali
Country
Client
Indonesia
Chevron
Indonesia
Chevron
Indonesia
Chevron
Italy
Shell Italy
IES
Italy
Dow
Italy
Siot
Libya
Eni
Malaysia
Petronas
Malaysia
Shell
Malaysia
Shell
Malaysia
Petronas
Malaysia
Esso
Malaysia
Petronas
Malaysia
Petronas
Malaysia
Petronas
Malaysia
Petronas
Malaysia
Shell
Malaysia
Petronas
Malaysia
Petronas
Netherlands Statoil
Netherlands Esso
Netherlands Exxon
Netherlands SanteFe
Norway
Norsk Hydro
Norway
Statoil
Oman
Shell
Oman
Shell
Oman
Shell
Oman
Shell
Oman
Shell
Oman
Deutag
Qatar
Qatar Petroleum
Qatar
Qatar Petroleum
Qatar
Nodco
Qatar
QAFCO
Qatar
Qatar Gas
Qatar
Qatar Gas
Qatar
Ras Gas
Russia
Luk Oil
Russia
Rosneft
Russia
Exxon Mobile
Russia
Slavneft
Russia
TNK/BP
S. Arabia
Aramco
S. Arabia
Pepsi Cola
S. Arabia
Crystal
S. Arabia
Samref
S. Arabia
Aramco
S. Arabia
Sabic
Singapore
Esso
Thailand
Thai Oil
Thailand
PTT
Thailand
Thai Oil
Thailand
Thai Oil
Thailand
IRPC
Thailand
Thai Oil
Thailand
PTT
UAE
Star Energy
UAE
Vopak
UK
Simon Storage
UK
Petroplus
UK
British Gas
UK
BP
Ukraine
Lukoil
Ukraine
NPZ Kremenchg
Ukraine
NPZ Kremenchg
Ukraine
NPZ Kremenchg
Vietnam
Technip
HPI Project Name
CHEVRON - DUMAI
Unocal/Chevron Balikpapan
PIPE/DURI – Chevron
Shell Tank Farms (La Chiarella/Genoa)
Mantua Refinery Upgrade
Dow Chemical Styrene Plant
Siot Tank Farm (Trieste)
Western Libyan Gas Project (Wafa/Mellitah)
Petronas Shell
Shell refinery Brunei
Shell Depot, Kuantan Port
Petronas/Shell Klang Valley Distribution Terminal
Esso Trengganu Crude Oil Terminal Maintenance
Petronas Labuan Depot
Petronas Bunkering, Pulau Indah
Petronas Depot, Langkawi
Petronas Fertilizer Kedah
Brunei Refinery of Shell
Petronas Depot,Bintulu,Sarawak
Petronas Lube Oil Plant MG3,Melaka
Statoil Snowhite
Esso Ringhorn
Exxon Mobil
Santa Fe Mooring Buoys
Norsk Hydro/Ormenlange
Mongstad Oil Refinery – Maintenance
PDO Shell
PDO Maintenance – Structures + Tanks
PDO – Burhaan Project
PDO – Various
PDO
Deutag
Qatar Petroleum, Mesaeeid Tank Farm Upgrade
Qatar Petroleum, EPIC of 3 LPG tanks & Conversion of existing
2 Propane Tanks to Butane Storage
National Oil Distribution Co. (NODCO)
Qatar Fertilizer Co. (QAFCO) Plant Maintenance Contract
QatarGas II Expansion – Seawater Intake Lines
QatarGas II Storage Tanks
Ras Laffan Onshore Expansion – Ras Gas – Seawater Lines
Petroleum Terminal
Petroleum Terminal
Sakhalin Petroleum Tanks
Petroleum Tanks
Upgrade Tank Farm
Tanks
Pepsi Cola
Crystal Titanium Di-Oxide
Samref Al-Jouf Bulk Storage Tank
South Terminal Aramco Project
Hadeed Flat Products Facilities, SABIC
Esso Singapore Spherical Tanks
Thai Oil PSP Speciality
PTT Sriracha Terminal
Thai Oil (CDU-3)
Thai Oil (Tankmaintenance)
IRPC Public Company Limited
Thai Oil ( Sphere Tank Project )
PTT Songkhla Terminal
Tank linings
Tank linings
Simon Storage Tanks
Petroplus Storage tanks
British Gas Maintenance
BP Landsites & Grangemouth
Lukoil
NPZ Kremenchg/Petroleum terminal
NPZ Kremenchg/Petroleum terminal, 6 points
NPZ Kremenchg/Gas station
Dung Quat Refinery No.1
19
Jotun worldwide
AZERBAIJAN
Jotun Azerbaijan
12/14 Pushkin Street, Apt. 63
BAKU AZ0000
Tel: +994 1298 5890
Fax:+994 1298 6334
BRAZIL
Jotun Brasil Imp.Exp.e Industria de Tintas Ltda.
Estrada São Lourenco, no 751 Capivari,
25243-150 Duque de Caxias - RJ
RIO DE JANEIRO
Tel: +55 21 2776 1313
Fax: +55 21 2776 2263
P.R. of CHINA
Jotun COSCO Marine Coatings Co. Ltd.
Jotun Coatings (Zhangjiagang FTZ) Trading
Co. Ltd.
Room 709-12, Goldlion Digital Network
Centre, 138 Tiyu Road East,
GUANGZHOU, 510620
Tel: +86 20 38 78 07 49
Fax:+86 20 38 78 19 66
Jotun COSCO Marine Coatings Co. Ltd.
Jotun Coatings (Zhangjiagang FTZ) Trading
Co. Ltd.
Floor 20, Jiu Shi Mansions,
No. 28 Zhong Shan Road (South)
SHANGHAI 200010
Tel: +86 21 6333 080 0
Fax:+86 21 6326 968 6
HONG KONG
Jotun COSCO Marine Coatings (H.K.) Ltd
Room 1208, 12/F,
Stanhope House
734 King's Road, Quarry Bay
HONG KONG
Tel: +852 2527 6466
Fax:+852 2861 1307
CYPRUS
Jotun Paints (Europe) Ltd
P.O. Box 52177, 4061 LIMASSOL
visiting address:
Visionhire Bldg,
Corner: Manoli Kalomiri & Marikas Kotopouli,
3rd Floor, 3030 LIMASSOL
Tel: +357 253 744 55
Fax:+357 253 744 00
DENMARK
Jotun Danmark A/S
Tornerosevej 127
2730 HERLEV
Tel: +45 4492 9400
Fax:+45 4492 9401
EGYPT
El Mohandes Jotun S.A.E.
El Sheikh Aly Gad El Haq Street
Florida Mall, Masaken Sheraton – 4th Floor
CAIRO
Tel: +20 2265 1800
Fax:+20 2265 1801
FINLAND
Nor-Maali OY
Vanhatie 20, 15240 LAHTI
Tel: +358 3 874 650
Fax:+358 3 874 6550
FRANCE
Jotun France S.A.
22/24 Rue du President Wilson, Bat.A
92300 LEVALLOIS PERRET
Tel: +33 1 4519 3882
Fax:+33 1 4519 3894
20
GERMANY
Jotun (Deutschland) GmbH
Winsbergring 25,
22525 HAMBURG
Tel: +49 40 851 960
Fax:+49 40 856 234
MALAYSIA
Jotun (Malaysia) Sdn. Bhd.
Lot 7 Persiaran Perusahaan, Section 23,
P.O. Box 7050 40700 SHAH ALAM
Tel: +60 351 235 500
Fax:+60 351 235 632
GREAT BRITAIN
Jotun Paints (Europe) Ltd.
Stather Road, Flixborough,
SCUNTHORPE DN15 8RR
Tel: +44 1724 400 000
Fax:+44 1724 400 100
THE NETHERLANDS
Jotun B.V.
P.O. Box 208
NL-3200 AE SPIJKENISSE
Visiting address:
Newtonweg 17A
NL-3208 KD SPIJKENISSE
Tel: +31 181 678 300
Fax:+31 181 617 899
GREECE
Jotun Hellas Ltd.
Skouze 26 Str.,
PIREAUS 18536
Tel: +30 210 42 85 980-82/210 42 86 035-37
Fax:+30 210 42 85 983
INDIA
Jotun India Private Ltd.
204 & 205, Ascot Centre
Sahar Road, Andheri - East
MUMBAI 400099
Tel: +91 22 2822 4600
Fax:+91 22 2820 5900
INDONESIA
P.T. Jotun Indonesia Paints and Chemicals
Kawasan Industri MM2100
Blok KK-1, Cikarang Barat
Bekasi 17520
Tel: +62 21 8998 2657
Fax:+62 21 8998 2658
IRELAND
Jotun (Ireland) Ltd.,
Unit K7, Marina Commercial Park,
Centre Park Road, CORK
Tel: +353 214 965955
Fax:+353 214 965992
ITALY
Jotun Italia S.P.A.
Via Petronio, 8, Zona Ind. Noghere
34147 - MUGGIA (TRIESTE)
Tel: +39 040 23 98204
Fax:+39 040 23 98222
JAPAN
NKM Coatings Co., Ltd.
25-15 Higashi Ohi 5-chome
Shinagawa-ku, TOKYO 140-8520
Tel: +81 3 3472 3521
Fax:+81 3 3472 3481
KAZAKHSTAN
Jotun Boya San ve Tic. AS
Kazakhstan Repr. Office
Samal-1, Zholdasbekova Str. 32/20
ALMATY
Tel/Fax: +7 327 253 2447
KOREA (SOUTH)
Chokwang-Jotun Ltd.
119-9, Bukjung-Dong,
Yangsan City
KYUNGNAM 626-110
Tel: 82 553 856 600
Fax:82 553 867 742
LATVIA
Jotun Paints (Europe) Ltd.
Representative Office,
Daugaygrivas 83/89
Office No.75, 1007 RIGA
Tel: +371 6747 3908/9
Fax:+371 6747 3907
LIBYA
Jotun Paints Libya
P.O.Box 80683, TRIPOLI
visiting address:
Gargaresh Road, Al Andalous district
TRIPOLI
Tel: +218 214 781 525 / 214 777 811
Fax:+218 214 780 718
NORWAY
Jotun A/S
P.O.Box 2021,
3248 SANDEFJORD
Tel: +47 33 45 70 00
Fax:+47 33 45 79 00
OMAN
Jotun Paints Co. LLC
Rusayl Ind. Estate, Road No.10
P.O. Box 672 Code 111, MUSCAT
Tel: +968 2444 6100
Fax:+968 2444 6105
PHILIPPINES
Jotun Singapore Pte. Ltd –
Philippines Branch Office, Unit 105/106,
Don Jesus Blvd, Kentucky Drive, Alabang Hill,
Muntinlupa City, METRO MANILA 1771
Tel/Fax: +63 2 809 7497
POLAND
Jotun Polska Sp.zo.o.
Ul. 10 Lutego 16, 81-364 GDYNIA
Tel: +48 58 555 1515
Fax:+48 58 781 9692
PORTUGAL
Jotun Iberica SA. (Suc. Portugal)
Estrada Vale ede Mulatas,
Armazern no. 5
2910-338 SETUBAL
Tel: +351 265 708 910
Fax:+351 265 708 563
QATAR
Jotun Qatar
Gulf Commercial Centre, Gulf Street,
P.O. Box 24373,
Code-0974, DOHA
Tel: +974 412728
Fax:+974 415608
ROMANIA
Representative Office,
Jotun Paints Turkey
Str, Nicolae Jorga Nr 113A
8700 CONSTANTA
Tel: +40 241 516987
Fax:+40 241 513863
Mobile: +40 722 230961
RUSSIA
Jotun Paints O.O.O.
Stachek Avenue 57, No.31
198096 ST. PETERSBURG
Tel: +7 81 2332 0080 / 2785 0034
Fax:+7 81 2783 0525
SAUDI ARABIA
Jotun Saudia Co. Ltd.
Jeddah Industrial City, Phase 3,
P.O.Box 34698, JEDDAH 21478
Tel: +966 2635 0535 / 2636 1271
Fax:+966 2636 2483
SINGAPORE
Jotun (Singapore) Pte. Ltd.
11-15 Sixth Lok Yang Road,
Jurong, SINGAPORE 628111
Tel: +65 6265 4711
Fax:+65 6265 7484
HEAD OFFICE
Jotun A/S
P.O.Box 2021, 3248 Sandefjord, Norway
Tel: +47 33 45 70 00 Fax: +47 33 45 79 00
www.jotun.com
SOUTH AFRICA
Jotun Paints South Africa (PTY) Ltd.
Wimbledon Road,
P.O.Box 187
BLACKHEATH 7581
Tel: +27 21 905 1070
Fax:+27 21 905 1652
SPAIN
Jotun Iberica S.A.
Poligon Santa Rita,
Calle Estatica no. 3
08755 Castellbisbal, BARCELONA
Tel: +34 937 711 800
Fax:+34 937 711 801
SWEDEN
Jotun Sverige AB
P.O. Box 151, Klangfärgsgatan 13,
421 22 VÄSTRA FRÖLUNDA
Tel: 46 3169 6300
Fax:46 3169 6397
SYRIA
Jotun Syria
Mr. Anas Tayarah,
c/o Arabian Enterprises
P.O.Box 9130, DAMASCUS
Tel: +963 116 113 820
Fax:+963 116 115 951
Mobile: +963 942 300 23
THAILAND
Jotun Thailand Ltd
Amata Nakom Ind. Estate (BIPII)
700/353 Moo 6 Tumbol
Donhualoh, Amphur Muang
CHONBURI 2000
Tel: +66 38 214 824-6/214 347-51
Fax:+66 38 214 373/375
TURKEY
Jotun Boya San. ve Ticaret. A.S.
Yeni Camlik Caddesi,
Ayaz Sok. No. 2/4,
4. Levent, ISTANBUL 80660
Tel: +90 21 2279 7878
Fax:+90 21 2279 2549
U. A. E.
Abu Dhabi
Jotun Abu Dhabi (LLC)
P.O.Box 3714, Mussafah
ABU DHABI
Tel: +971 2551 0300
Fax:+971 2551 0232
Dubai
Jotun U.A.E. Ltd. (LLC)
P.O.Box 3671,
Al Quoz Industrial Area
DUBAI
Tel: +971 4339 5000
Fax:+971 4338 0666
USA
Jotun Paints, Inc.
9203 Highway 23,
P.O. Box 159,
Belle Chasse, LA 70037
Tel: +1 800 229 3538
+1 504 394 3538
Fax:+1 504 394 3726
VIETNAM
Jotun Paints (Vietnam) Co. Ltd.
Song Than Industrial. Zone,
No.1 Street 10,
Di An District,
Binh Duong Province
Tel: +84 65 074 2206-9
Fax:+84 65 074 2205
YEMEN
Jotun Yemen Paints Co. Ltd
P.O. Box 70183, Al Alam
ADEN
Tel: +967 2820 546-9
Fax:+967 2249 362
Designed and produced by RMP Design and Marketing Ltd. www.rmpdesign.com Warecode: 8MM0538423/0908/1K
AUSTRALIA
Jotun Australia Pty. Ltd.,
P.O.Box 105, Altona North,
9 Cawley Road,
BROOKLYN, VIC 3025
Tel: +61 3 9314 0722
Fax: +61 3 9314 0423