Tools That Make A Difference

R
Tools That Make A Difference
Table of Contents
We take great pride
in introducing innovative product
solutions for woodworkers
1..........Mite-R-Excel - 07100
Precision Miter Gauge for Tablesaws
2-3.......Mast-R-Slide - 07500
Precision Sliding Cross-Cut Table
R
around the world. Our philosophy
4..........Rout-R-Lift - 02001 For Plunge Routers
is “deeply routed” in offering
the highest level of quality at
affordable prices. We are honored
to serve some of the most skillful
and creative people and companies
in the woodworking industry.
Our mission is to continuously
inspire the evolution of
woodworking and challenge
everyone to “raise the bar” to the
next level. You will find everyone
on the JessEm team to be very
customer friendly. We stand behind
our products 100% and we welcome
your feedback, good or bad.
For it is you the customer who
inspires Everyone At JessEm Tool
Company to give our best each day.
Rout-R-LiftFX - 02300 series For 2HP Fixed Base Routers
5..........NEW Rout-R-Motor 3.5 Max HP EVS - 05626
Remote Power and Variable Speed Motor by Milwaukee
6..........Mast-R-Lift - 02100 series
For 3HP Fixed Base Routers
7..........Mast-R-Lift Excel - 02201
Phenolic Table with Built-In Mast-R-Lift
8..........Mast-R-Fence - 04001
Universal Router Table Fence
9..........Mite-R-Slide - 06001
Mitering Gauge for Mast-R-Fence
10-11....Accessories
12-13....Complete Rout-R-Table Systems
Photos contained within this brochure do not necesarily represent proper usage of safety
guards and other safety equipment provided by the manufacturer. Please refer to your
owners manual for proper usage of all power equipment.
Mite R Excel™
Precision Miter Gauge with Dual
Indexing Angle Location
The New Mite-R-Excel™ from JessEm Tool offers an unsurpassed
level of accuracy, reliability and value. Designed specifically for
the serious woodworker, this fine quality precision instrument is
CNC machined from heavy gauge 6061 aluminum components for
rigidity and rock solid performance. The miter gauge pivots 45
degrees in both directions and features our innovative Dual-Indexing Angle Location System which utilizes a brass push-pin to
index positive stops at every five degrees. A secondary range of pin
locations allows for quick accurate ½ degree increments at every
angle in between each 5 degrees. The gauge mechanism locks in
firm with a twist of our solid aluminum handle with knurled grip
and red anodized finish.
The Mite-R-Excel™ fence features a heavy-gauge aluminum extrusion that’s rock solid with no flex. The fence length is 27” closed
and extends out to a maximum measured cut length of 36” with
stop. The fence also features our unique Dual-Reference Adjustable Scale that allows accurate measurements from the blade to
24” and out to 36” when using the telescoping fence extension.
The fence offers quick and easy adjustability with solid brass lock
knobs and features multiple “T” tracks for attaching your own
sacrificial sub-fences to
the fence face for zeroclearance crosscuts.This
beautifully designed and
engineered tool performs
as well as it looks and is
sure to become your most
prized table saw accessory.
FEATURING. . .
• Heavy-Duty design and construction provides exceptional
dampening with increased rigidity resulting in greater accuracy
through the cut.
• Precision CNC machined from solid 6061 aluminum, solid steel
and solid brass components.
• JessEm’s Innovative Dual-Indexing Angle Location System
provides precise “positive stop” angle locating to every ½ degree
and a separate vernier scale allowing additional angle settings to
1/10th of a degree.
• Heavy-Duty 24” extruded aluminum fence extends to 36” over
all with an innovative Dual-Reference Adjustable Scale for
accurate cutting measurements.
• 20” solid steel bar with “T”-Slot washer fits standard ¾”
miter slot.
• Adjustable snugger bar design to eliminate slop in the miter slot.
• Adjustable flip-stop for fast repeatable measured crosscuts.
Model#
07100
Description
Mite-R-EXCEL™ Precision Miter Gauge with
Dual-Indexing Angle location
1
R
Mast R Slide™ 7500
Take your table saw to a higher level of precision and performance
with the New MAST-R-Slide™ Sliding Cross-Cut Table from JessEm
Tool Company. This fine quality table saw system features a network
of beautifully engineered aluminum extrusions, steel guide rails and
precision bearings designed to create the ultimate cross-cutting solution.
Designed to replace the left extension wing on most American style
cabinet saws and contractor saws with cast iron table tops.
The MAST-R-Slide™ system features JessEm’s innovative Posi-Trak™
bearing guided multi-rail system for an exceptionally smooth and
accurate glide from one end of the travel range to the other. The guide
mechanism is comprised of 30 double-sealed precision bearings
positioned in a staggered design to provide constant contact to the guide
rails throughout its travel.
The sliding table is easily adjustable to level with the saw’s tabletop and
to align it parallel to the cutting blade. Also included is an extension
wing support table that is fully adjustable for positioning in a fixed
location anywhere along the length of the sliding table as determined by
the cutting operation being performed.
2
Mast R Slide™ 7500
The extruded aluminum fence length is 28 inches closed and extends
outward for a maximum measured cut length of 48 inches with the
flip-stop. The fence offers mitered cross-cuts up to 45 degrees in both
directions. The MAST-R-Slide™ sliding table offers three positions for
the fence, two front end positions (one optimal location for mitered
crosscuts and another allowing for an increased cutting width at 90
degrees) and a rear end position for a maximum cross-cut capacity of
36 inches. The fence is easily moved from one position to the other
and quickly detaches from the sliding table for unobstructed use of the
table saw while utilizing the rip fence.
The MAST-R-Slide™ 7500 was designed so that no support legs are
required, offering a smaller footprint and allowing the optional use
of a mobile base on the saw. The MAST-R-Slide™ 7500 will fit right or
left-tilt table saws and is designed to be used on the left side of the saw.
The table saw must have a solid cast iron top and the front and rear
fence rails will require modification.
FEATURING. . .
• Featuring JessEm’s innovative Posi-Trak™ bearing guided multi rail system for an exceptionally smooth and accurate glide from one end of the travel range to the other. 
• Exclusive linear guide mechanism comprised of 30 double-sealed
precision bearings and steel tracks contained in heavy gauge
aluminum extrusions for rock solid precision through the cut. 
• Fence length is 30 inches closed and extends outward for a
maximum measured cut length of 48” with adjustable flip-stop. 
• Table locks in four positions - flush front, flush rear, centered or
fully retracted.
• Fits left and right tilt saws and offers a 36 inch maximum cross cut. 
• Designed for table saws with a cast iron top and a front to rear
depth of 27” to 28”. 
• Not designed for bench top or portable contractor saws. 
• Replaces the left “cast-iron” wing on table saws with a three or four
bolt mounting pattern. 
• Front and rear fence rails will require modification. 
• Instructions included.
Product Specifications  
• Maximum stroke: 36-3/4”
• Length of cut off fence: 28” extends to 48”
• Length of rail system: 27”
• Sliding Table Dimensions: 7-7/8” x 39”
• Extension Wing Dimensions: 8-1/2” x 8-1/2”
• Sliding Table Width including Outrigger: 16-3/8”
• Maximum Cross Cut (w/fence in front position): 32”
• Maximum Cross Cut (w/fence in middle position): 24-1/2”
• Maximum Cross Cut (w/fence in rear position): 36”
• Unit Weight: 48 lbs.
* Actual cross cut capacities may vary as the position of the saw blade
varies from saw to saw.
Model#
Description
07500
Mast-R-Slide™ 7500 Precision Sliding
Cross-Cut Table
07511
Extension wing for 07500
Blade guards are removed for clarity only. Always use
proper safety equipment provided by the manufacturer.
3
Rout R Lift™
Introduced to the woodworking world in 1999 by JessEm Tool Company. The Rout-R-Lift™
has added a tremendous improvement to the table-mounted router. Simply drop in the
handle, crank the router up or down, pull out the handle and you’re ready to rout!
The plate has a dial etched with .005” increments allowing you to make repeatable
micro-adjustments with ease. The Rout-R-Lift™ offers a full 2-1/2” of vertical
travel.
Constructed of premium 6061 aluminum components, the Rout-R-Lift™ features our
unique Mast-R-Ring™ router mounting system with JessEm’s so called “Swiss Cheese”
multi-hole pattern. We have yet to find a router that won’t fit this system! Once
mounted to the Mast-R-Ring™ the router can then be rotated to the most convenient
position to access your router. The insert plate centerhole is machined to accept a large
3-1/2” raised panel bit and includes a 1-1/2” diameter insert ring. Additional insert ring
sets are available separately.
•Insert plate dimensions: 11-3/4” x 14-3/4” x 3/16” thick
•Insert plate is machined with a 3-5/8” dia. Tab-Loc™ centerhole.
•Built in plate leveling system for a perfect fit flush to the tabletop.
•Includes a 1-1/2” insert ring with a wrench, starting pin and hex key wrench.
Model#
Description
02001
Rout-R-Lift™ Size: 11-3/4” x 14-3/4” x 3/16” thick
Fits all router bases used with MAST-R-TOP™ #02034
02031
Template for routing a hole for a Rout-R-Lift™ in a custom table top
Router is not included.
Rout R Lift FX
™
•
•
•
•
•
•
The “Ultimate Base” for interchangeable 2HP router
motors. Now 2HP router users can experience the same
precision height adjustment and above table bit changes
as our mast-r-Lift™ at a more affordable price. Available
in three carriage sizes for today’s most popular 1-3/4HP to
2-1/2HP fixed base router motors.
Designed for 1-3/4HP to 2-1/2HP fixed base router motors
Above the table top height adjustment and bit changes
9-1/4” x 11-3/4” top plate is machined from 3/4” thick solid phenolic
Quick change motor installation with new cam-lock clamp design
8 position set screw plate leveling
Includes 1-1/2” Tab-Loc™ insert ring, insert ring wrench, starter
pin, hex key and hardware
The under carriage is precision machined from premium
6061 aluminum, anodized red and fastened with solid brass
fittings. The rout-r-Lift fx™ features a Cam-Lock Clamp
design for quick and easy “Plug-N-Rout” motor changes.
The insert plate centerhole is 3-5/8” in diameter and
includes a Tab-Loc™ insert ring with a 1-1/2” diameter bit
hole. Additional insert ring sets are available separately.
New Cam-Lock Clamp design for easy motor installation
Model#
4
Description
02302
FITS PORTER CABLE 690 & 890 SERIES, BOSCH 1617 & 1618
SERIES, DEWALT 610, 616 & 618 SERIES.
02303 FITS MAKITA 1101 SERIES.
02304 FITS MILWAUKEE 5615, 5616 & 5619 SERIES.
02305 FITS Hitachi M12VC & KM12VC.
03003
TEMPLATE FOR ROUTING A HOLE FOR A ROUT-R-LIFT FX™
IN A CUSTOM TABLE.
Router is not included.
NEW 3.5 Max HP EVS
Rout R Table Motor
with remote power and variable speed
Powered by Milwaukee
JessEm Tool teams up with Milwaukee Electric Tool to take the table mounted
router to the next level. We found the Milwaukee 3.5 Max HP motor offered the
best overall production routing performance available for our lift products.
This industry first router configuration consists of a powerful Milwaukee 3.5
max HP EVS motor with power and variable speed controls moved down the
cord to a remote control box. Designed to be used with a JessEm
mast-r-Lift™,the motor is direct wired to the remote control box and configured
with premium tachometer based electronic feedback circuitry to maintain
optimal speed and power under load.
This is the ultimate power source for router table use in a production
environment and built to meet the demands of all woodworking applications.
Imagine JessEm mast-r-Lift™ height adjustment with remote power and variable
speed control all conveniently located at your fingertips. You’ll never need to
reach under the table again!
Remote Control Box offers convenient access to both
power and variable speed. Just flip the paddle switch
on and dial in your desired RPM setting.
Available exclusively from JessEm Tool Company.
• For use with JessEm mast-r-Lift™ #02101 and mast-r-Lift Excel™ #02201 only
(.030” Shim is required and included with this product)
• Powerful 15 AMP, 3-1/2 max HP EVS Milwaukee motor
• Premium electronic feedback circuitry maintains optimal speed and
power under load
• Electronic variable speed control (10,000-22,000 RPM)
• 1/2” & 1/4” premium self-releasing collets
• 100% Sealed ball bearing construction
• Soft-Start for smooth transition to full power on
• Not for hand held use
Model#
05626
Description
3.5 Max HP EVS Router Table Motor
(.030” Shim is required and included with this product)
5
R
Mast R Lift™
Beautifully finished with red and black anodized components, the Mast-R-Lift™ is the
sequel to our original Rout-R-Lift™. Precision machined in premium 6061 aluminum,
this is the top of the line for JessEm’s lift systems. Designed for cabinetmakers,
furnituremakers and other custom woodworking pro’s, the Mast-R-Lift™ is built for
long-term professional use.
NEW Direct
Drive Design
Featuring a more streamlined design and increased performance with a full 3-3/4” of
vertical travel. The insert plate is precision-machined from a solid 1” thick aluminum
blank. Our new speed crank design offers a tall handle for clearing the top of the fence
while making adjustments. Designed specifically for the Porter Cable 7518 and to fit
similar cylindrical motor housings with the use of a reducer collar. The insert plate
centerhole is machined to accept up to a 3-1/2” raised panel bit and includes a 1-1/2”
insert ring. Additional insert ring sets are available separately.
•Allows height adjustment and bit changes from above the table.
•Available in 9-1/4”x11-3/4” or 8-1/4”x11-3/4” plate sizes.
•Insert plate is machined with a 3-5/8” dia. Tab-Loc™ centerhole.
•Built in plate leveling and insert adjusters for a perfect fit.
•Includes a 1-1/2” insert ring with wrench, starting pin and hex wrench.
Model#
Description
02101
Mast-R-Lift™ size 9-1/4” x 11-3/4” For Porter-Cable
7518/7519 Used with Mast-R-Top™ #03004
02102
Mast-R-Lift™ size 8-1/4” x 11-3/4”
For use in other Non-Jessem Router Table Models*
02111
Reducer Collar – 3-1/2” dia. For PC 690, 890
Bosch 1617/1618, DeWalt 610, 616, 618
02113
Reducer Collar – 3-1/4” dia. For Makita 1101
02115
Reducer Collar – For Hitachi M12VC & KM12VC
02116
Reducer SHIM KIT – For milwaukee Series 5625
02118
Reducer Collar – For milwaukee Series 5615,
5616 and 5619
Router and bits not included. * Only available in belt drive version.
6
Mast R Lift Excel™ with MicroDial™
Our best lift solution for the router table, combines our solid phenolic
Mast-R-Top™ in black, with all the features of our Mast-R-Lift™ and
more. The Mast-R-Lift Excel™ was designed to allow the addition of
two great new features, a micro-adjust dial, which protrudes slightly
beyond the edge of the tabletop and rotates independent of the lift
mechanism. This feature allows you to “zero-out” theMicroDial™
and then accurately crank the router up at a ratio of 1/64
inch per 1/4 turn of the crank. The dial is scaled
for micro-adjustments as intricate as .001”.
Extremely precise adjustments to the router
bit cutting height can now be performed faster
and with more precision than ever before.
The second feature to this new product is an
integrated dust port that is machined into the lift’s
housing underneath the tabletop. This design virtually
removes chips just as they are cut by the router bit.
This design feature will literally extend the working life of
the router motor. When mounted to a router table, the router motor is
positioned upside-down, leaving the internal motor vulnerable to an
accumulation of dust and pitch deposits. This causes the motor to heat
up over time and eventually fail. JessEm’s new lift design removes the
chips before they can reach the router, ultimately prolonging the life
of the motor through more efficient chip extraction. This feature helps
justify your investment in this product.
The black phenolic Mast-R-Top™ includes our Mast-R-Trac™ with
a Miter Track in between two T-tracks. This heavy gauge 6061
aluminum extrusion is anodized in red and ready to attach jigs,
hold-downs or a miter gauge. The lift mechanism is raised and lowered
by an offset right-angle gearbox positioned on the right side, under the
tabletop. The gearbox features a red anodized aluminum “balanced
ball crank” handle reminiscent of the classic milling machines used in
metalworking. The gearbox drives the lift mechanism via a precision
timing belt. The lift mechanism utilizes our patented adjustable
tensioning design for reliable operation with the utmost accuracy and
no backlash.
The new Mast-R-Lift Excel™ will accept the Porter
Cable model 7518 out of the box, and accepts
additional routers with cylindrical motor housings
with the use of a reducer collar (sold separately).
The centerhole in the tabletop is machined
with a 3-5/8” diameter TAB-LOC™ centerhole
to accept up to a 3-1/2” diameter raised
panel bit. An insert ring with a 1-1/2” diameter
centerhole for most smaller bit diameters, an insert ring
wrench, starting pin and hex key wrench are also included.
Additional insert ring sets are available separately.
Model#
Description
02201
MAST-R-LIFT EXCEL™ COMBINATION MAST-R-TOP™ W/BUILT-IN MAST-R-LIFT™ – SOLID PHENOLIC
TABLETOP MEASURES 24” DEEP x 32” WIDE
02111
REDUCER COLLAR – 3-1/2” DIA. FOR PC 690, 890
BOSCH 1617/1618, DEWALT 610, 616, 618
02113
REDUCER COLLAR – 3-1/4” DIA. FOR MAKITA 1101
02115
Reducer Collar – For Hitachi M12VC & KM12VC
02116
Reducer SHIM KIT – For milwaukee Series 5625
02118
Reducer Collar – For milwaukee Series 5615,
5616 and 5619
Router and bits not included. Mast-R-Fence™ and stand sold separately.
7
Mite R Slide™
Designed to be mounted to the backside of the Mast-R-Fence™ and
slide smoothly across the table on a chrome plated ground shaft.
This innovative accessory is engineered to perform precisionmachined square or angled cope cuts, crosscuts and other end
milling operations with renewed accuracy on a router table. The
Mite-R-Slide™ offers greatly improved performance and increased
precision over similar cuts made with a traditional miter gauge
traveling in a single miter track in the tabletop.
Built from precision machined 6061 aluminum components
anodized in red and black, the Mite-R-Slide™ features a robust
industrial design and is engineered for long-term professional
use. The precision miter gauge rotates 45-degrees in both
directions and features positive detents every 5 degrees,
including a 22-1/2 degree position. Click
into your desired angle and lock it
in with a twist of our heavy-duty
handle, machined from solid
6061 aluminum with a knurled
grip and a red anodized finish.
extrusion with a T-track along the top face for attaching different
types of hold down accessories. The fence also slides in a second
T-track located on the backside to position the fence flush to the
router table’s fence at various angles.
The fence locks into position easily with the twist of two solid
brass knobs and includes a replaceable sub-fence made of solid
phenolic. The Mite-R-Slide™ can also be rolled up over the
bar and positioned behind the fence when not in use. You will
experience tighter fitting joints from the accuracy of this well
designed product.
The fence on the miter gauge
features a heavy-duty aluminum
8
Model#
Description
06001
MITE-R-SLIDE™ MITER GAUGE ACCESSORY
Mast-R-Fence™, Mast-R-Top™ and stand sold separately.
Winner of the 2003 New Products
Award for Safety at the 2003 AWFS
Fair in Anaheim California.
Mast R Fence™
R
The most advanced router table fence in its price range. The
Mast-R-Fence™ looks as beautiful as it’s function. Featuring
a dual track fastening system with adjustable scales that
can be set for a zero-reference and fast, repeatable setups. We also added a forward tilted scale along the top
face for our Fence-Stop accessory (available separately).
Constructed of precision-machined 6061 aluminum with
a red-hot anodized finish. The fence glides smooth in the
tracks and locks firm with a twist of our “high-boy” lockdown knobs. We have found that solid phenolic is the
ultimate material for our sub-fences.
Our innovative dustport
features a large chamber with
a clear acrylic housing that
won’t clog up and accepts a
2-1/4” dia. vac hose fitting.
We also include a set of
shims for offsetting the outfeed sub-fence for jointing
operations.
The Mast-R-Fence™ also offers enough Ttracks front and back for attaching any
type of jig or hold down configuration
you can dream up. Fits all tabletops
from 24” to 32” wide and from 1/2”
to 1-1/2” thick.
Our PVC coated phenolic offers the same slick
characteristics of UHMW plastic with far greater stability
and durability.
Model#
Description
04001
Mast-R-Fence™ 36” Length x 4” Height
04003
Replacement Sub-Fence Set of (2)
Router and bits not included.
9
Mast R Top™ Solid Phenolic
Router Table Tops
The ultimate tabletop material for today’s hi-tech woodworking
machinery is our pvc coated phenolic. Phenolic is one of the
strongest, most stable and durable materials available for an
industrial strength work surface. It’s widespread use in military
and aerospace applications says it all.
Our tabletop is 3/4” thick and guaranteed
not to warp, sag, swell or rust.
Phenolic is the step-up
material for today’s
woodworking pros
and virtually renders
melamine an obsolete
option for long-term
professional use.
The Mast-R-Top™ is available
pre-machined for our
Rout-R-Lift™, Mast-R-Lift™
or Mast-R-Plate™ systems. The
underside is also pre-drilled for
our Mast-R-Fence™ and Rout-RTABLEStand™. All Mast-R-Top’s™ are machined with a T-slot miter
track and feature our innovative plate adjusters to snug your insert
tight in the tabletop.
Rout R Plate™
Here is a perfectly flat, rigid and durable mounting solution
for reliable use in any router table application. The insert
dimensions of the Rout-r-plate™ are the same size as our
mast-r-lift™ and our rout-r-Lift fx™
and will also fit our model #03004
solid phenolic Mast-R-Top™. The
Rout-r-plate™ includes a convenient
centerhole bushing used to align the
router so it is centered in the bit hole.
Simple step by step instructions make
accurately drilling and mounting any
router easy to accomplish. The plate
centerhole is machined to accept a
3-1/2” raised panel bit and includes two additional insert
rings. Additional insert ring sets are available separately.
•Insert plate dimensions: 9-1/4” x 11-3/4” x 3/8” thick.
• Plate is machined with a 3-5/8” diameter Tab-Loc™ centerhole.
• Includes a 2” diameter insert ring and a 1-3/8” insert ring that
also accepts Porter Cable style template guides.
•Includes a bushing for mounting the router centered on the plate.
•8 position set screw plate leveling.
Model#
03100
Model#
02034
03004
Mast-R-Top™ for Rout-R-Lift™ 32” x 24” with
11-3/4” x 14-3/4” hole for insert plate
Mast-R-Top™ for Mast-R-Lift™,
Mast-R-Plate™, Rout-R-Plate™ or
Rout-R-LiftFX™, 32” x 24” with 9-1/4”
x 11-3/4” hole for insert plate
This is the most rigid open frame router table
stand you will find. Constructed of premium
6061 aluminum with a black
anodized finish. This stand
is built for a long stable life
of reliable performance.
The Rout-R-TableStand™
measures 35” in height
without a tabletop and
includes heavy-duty leg
levelers with rubber feet.
Assembly is quick and easy
with riveted steel nuts preinstalled and ready to be
bolted.
05001
10
rout-R-Plate™ Used with Mast-R-Top #03004
Description
Rout R TableStand™
Model#
Description
Mast R Plate™
The first truly universal router mounting
plate. The Mast-R-Plate™ features our
unique Mast-R-Ring™ router mounting
system with JessEm’s so called “Swiss
Cheese” multi-hole pattern.
We have yet to find a router that won’t fit
this system! Once mounted to the MastR-Ring™ the router can be rotated to the
most convenient position to access your
router.
The insert plate centerhole is machined
to accept a large 3-1/2” raised panel
bit and includes a 1-1/2” insert ring.
Additional insert ring sets are available
separately.
•Insert plate dimensions: 9-1/4” x 11-3/4” x 1/4” thick
• Insert plate is machined with a 3-5/8” dia. Tab-Loc™ centerhole.
• The insert plate is precision machined from premium 6061
aluminum.
•Includes a 1-1/2” insert ring with wrench, starting pin and hex
wrench.
Description
Rout-R-tableStand™
22” deep, 26” wide, 35-1/4” High
Model#
03002
Description
Mast-R-Plate™ Used with Mast-R-Top #03004
Replacement Sub-Fences for
the
Dust Hose Adaptors for
Mast R Lift Excel™
A two piece set of solid phenolic
sub-fences for our Mast-RFence™. Each section measures
17-3/4” long x 2-1/2” wide
X 3/4” thick.
These adapter plates are CNC machined from 6061 aluminum with
anodized black finish. Available for 4”, 2-1/2” and 2-1/4”- std. shop
vac hose/fitting diameters for use with our Mast-R-Lift Excel™ and
other custom dust collection applications.
Model#
04003
Description
Replacement Sub-Fences for the
Mast-R-Fence ™
4 Piece Insert
Ring Sets
Model#
This is the most convenient and
versatile solution to changing the
bit-hole diameter in all JessEm
router plates and lift systems.
Precision machined from solid
1/4” thick phenolic and featuring JessEm’s exclusive Tab-Loc™
design. You can install and remove our insert rings with the
flick of our unique two-prong insert ring wrench.
Description
02021
4 Pc. Insert Ring Set with predrilled
1/4”, 1/2”, 1-3/8” & 2-1/2” centerholes
02028
4 Pc. Insert Ring Set with no pre-drilled
centerholes
Reducer Collars for
Mast R Lift™
Use one collar to adapt various routers with
cylindrical motor housings to the inside
carriage diameter of our Mast-R-Lift™.
Available router applications are listed below.
Model#
Description
02111
Reducer Collar – 3-1/2” dia. For PC 690, 890
Bosch 1617/1618, DeWalt 610, 616, 618
02113
Reducer Collar – 3-1/4” dia. For Makita 1101
02115
Reducer Collar – For Hitachi M12VC & KM12VC
02116
Reducer SHIM KIT – For milwaukee Series 5625*
02118
Reducer Collar – For milwaukee Series 5615,
5616 and 5619
* Fits new style Mast-R-Lift™ and Mast-R-Lift Excel™ only.
02214
DUST HOSE ADAPTOR FOR 4” DIAMETER
DUST HOSE
02215
DUST HOSE ADAPTOR with 2-1/4” I.D. and
2-1/2” O.D. for STD. Shop vac or 2-1/2”
dust hose
Routing Templates for
Custom Router Table Tops
R
We now offer two insert ring sets, one with pre-drilled
centerholes of 1/4”, 1/2”, 1-3/8” (accepts template guide
busings) and 2-1/2” diameters and the other with no pre-drilled
centerholes for making your own zero-clearance inserts.
Model#
Description
Use one of these templates to rout
the insert hole for our
Rout-R-Plate™, Rout-R-Lift™,
Rout-R-Lift FX™, Mast-R-Plate™,
or Mast-R-Lift™ when installing
in your own custom table top.
CNC machined MDF material.
Model#
Description
02031
Template for routing a 11-3/4” x 14-3/4” hole for
a Rout-R-Lift™ in a custom table top
03003
Template for routing a 9-1/4” x 11-3/4” hole for a
Rout-R-plate™, Rout-R-lift fx™, Mast-RLift™ or Mast-R-plate™ in a custom table top
Fence-Stop for the
Mast R Fence™
Designed to slide along the forward-tilted
scale on our Mast-R-Fence™ and lock firm in
any position you choose.
This stop is machined from 6061 aluminum
with a black anodized finish.
Model#
04002
Description
Fence-Stop for Mast-R-Fence™
11
R
Complete Rout R Table™ Systems By JessEm
All JessEm components can be configured to provide a wide range of routing systems. To help make it easier to configure a complete routing system
with JessEm products, here are all the components matched up to offer a variety of routing solutions to meet your specific needs. These systems
range from a phenolic insert plate system with our Rout-R-Plate™ to our mast-R-Lift Excel™ with JessEm’s exclusive MicroDial™ for the most
precise height adjustment on the market and integrated dust collection. Each routing system represents a production quality workstation equipped
with one of our phenomenal solid phenolic Mast-R-Top™ tabletops, our world class Mast-R-Fence™ and our most stable, Rout-R-TableStand™. You
can refer to the previous pages of this brochure for more specific details about each of the components described in these systems.
Rout R Table™ with Rout R Lift™
For lift capability with a plunge router our original Rout-R-Lift™ is truly a universal lift
solution. We have yet to find a router that won’t fit our Rout-R-Lift™.
Model#
02040
Description
Complete Rout-R-Table™ w/Rout-R-Lift™ (02001) Includes Mast-R-Top™
(02034), Mast-R-Fence™ (04001) and Rout-R-TableStand™ (05001)
Rout R Table™ with Mast R Lift™
For lift capability with a router motor with a cylindrical housing such as the Porter
Cable 7518, our Mast-R-Lift™ is a step-up solution.
Model#
02140
Description
Complete Rout-R-Table™ w/Mast-R-Lift™ (02101) FOR PORTER CABLE 7518 AND OTHERS WITH REDUCER COLLARS OR REDUCER PLATES. Includes Mast-R-
Top™ (03004), Mast-R-Fence™ (04001) and Rout-R-TableStand™ (05001)
Rout R Table™ with Mast R Lift Excel™
with MicroDial™
Our new Mast-R-Lift Excel™ combines the features of our Mast-R-Lift™ built into a black
phenolic Mast-R-Top™. This is the top of our line for a precision lift solution.
Model#
02240
12
Description
COMPLETE ROUT-R-TABLE™ W/MAST-R-LIFT EXCEL™ (02201) FOR PORTER CABLE
7518 AND OTHERS WITH REDUCER COLLARS OR REDUCER PLATES. INCLUDES
MAST-R-FENCE™ (04001) AND ROUT-R-TABLESTAND™ (05001)
Rout R Table™ Systems
Tools That Make A Difference
Rout R Table™ with Rout R Lift FX™
The rout-R-Lift FX™ systems offer our most affordable router table with precision height
adjustment. There are three versions of complete router tables with a rout-R-Lift FX™ to
choose from. Each version will work for specific 2HP router motor applications (see chart for
the correct router application).
Model#
Description
02340
COMPLETE ROUT-R-TABLE™ w/ROUT-R-LIFT-FX™ MODEL #02302 FOR PORTER CABLE 690,
890 SERIES, BOSCH 1617, 1618 SERIES AND DEWALT 610, 616 & 618 SERIES. INCLUDES
MAST-R-TOP™ (03004), MAST-R-FENCE™ (04001) AND ROUT-R-TABLESTAND™ (05001)
02342
COMPLETE ROUT-R-TABLE™ w/ROUT-R-LIFT-FX™ #02303 FOR MAKITA 1100 SERIES.
INCLUDES MAST-R-TOP™ (03004), MAST-R-FENCE™ (04001) AND ROUT-R-TABLESTAND™ (05001)
02344
COMPLETE ROUT-R-TABLE™ w/ROUT-R-LIFT-FX™ MODEL #02304 FOR MILWAUKEE SERIES
5615, 5616 & 5619. INCLUDES MAST-R-TOP™ (03004), MAST-R-FENCE™ (03004) AND
ROUT-R-TABLESTAND™ (05001)
2002
ERICA
M
ER
EDITORS’
CHOICE
WO
O
K
For a great Rout-R-Table™ without height adjustment, this is our most
versatile insert plate solution. Our Mast-R-Plate™ offers the same universal
mounting system from our Rout-R-Lift™ allowing easy attachment to any
router on the market, no drilling required.
A
™
N
Rout R Table with Mast R Plate
™
D W OR
ERICA
M
R
EDITORS’
CHOICE
O
Complete Rout-R-Table™ w/Mast-R-Plate™ (03002) Includes Mast-R-Top™
D W OR
(03004), Mast-R-Fence™ (04001) and Rout-R-TableStand™ (05001)
KE
WO
03040
Description
N
Model#
A
2002
KE
R
N
A
2002
ERICA
M
N
ER
EDITORS’
CHOICE
K
O
D W OR
A
2002
ERICA
M
N
03140
D W OR
K
O
ER
EDITORS’
CHOICE
WO
Model#
O
WO
This is the most affordable way into a JessEm system that can then
be upgraded with one of our precision height adjustment systems
down the road. This model is equipped with our solid phenolic Rout-RPlate™ insert which can be easily drilled to adapt to any router you want
to attach to it. The Rout-R-Plate™ dimensions are the same as our Mast-R-Plate™,
Rout-R-Lift FX™ and our Mast-R-Lift™ model #02101 offering several different
upgrade options (plate size: 9-1/4” X 11-3/4”).
EDITORS’
CHOICE
WO
Rout R Table™ with Rout R Plate™
A
2002
ERICA
M
D W OR
Description
Complete Rout-R-Table™ w/rout-R-Plate™ (03100) Includes Mast-R-Top™ (03004), Mast-R-Fence™ (04001) and Rout-R-TableStand™ (05001)
13
124 Big Bay Point Road
Barrie, Ontario
L4N 9B4 Canada
toll free 866-272-7492
EMAIL jessem@jessem.com
PHONE 705-726-6145
Website www.jessem.com
fax 705-726-6055
Note: Sorry, we don’t include the actual router or router bits for sale with our products. We only show these items in our product photography for aesthetic purpose.
As part of our Continuous Product Improvement Policy, JessEm products are always advancing in design and function. Therefore there may be slight differences
between what is shown in our photography and what is sold at time of purchase. We reserve the right to make positive changes to our products at our discretion.