wolf class lucius pattern warhound titan

WOLF CLASS LUCIUS PATTERN
WARHOUND TITAN
TM
RECOMMENDED ORDER
OF ASSEMBLY
FEET
SHEET 1 OF 6
LEGS
TORSO
HEAD
WEAPONS
DETAILS
ASSEMBLY OPTIONS
Cut all pistons to required length depending on foot position.
PISTONS
NOTE: It can be useful to support the sole of the foot
in the position required when building the toes.
SMALL
TOE PISTON
X12
TOE PISTON
X6
THIGH PISTON
X2
KNEE PISTON
X2
ANKLE PISTON
X10
FRONT TOE TIP
(check this is the
largest toe with an
Imperial Eagle
Underneath.)
HIP PISTON
X6
REAR TOE JOINT
TOE PISTON PART 2
Cut to required length)
Illustrated above are the various types of pistons and piston sleeves
used to construct the legs of the Titan. The pieces are shown as
supplied with the casting gates. You will need to cut off these gates.
It is recommended that you identify each piece before assembly. You
will need to trim each piston to achieve the desired pose for your
model.
SMALL TOE
PISTONS
(Cut to required length)
REAR TOE
TOE PISTON PART1
SOLE
BUILDING AND PAINTING THE MODEL
The Warhound Titan is a complicated model kit. For best results we recommend to take your time to
assemble it. Besides the tools you would normally need to assemble plastic or metal models you will
need the following: a razor saw, several different grades of sandpaper or sanding pads, a set of files
and modelling clippers. Of course you will also need some glue. Citadel Super Glue will work perfectly.
It is possible to assemble your model in an almost limitless choice of poses.To achieve the desired
pose we recommend dry fitting each assembly before gluing.
FRONT TOE JOINT
SIDE TOE TIP
MIDDLE TOE JOINT
It may be easier to paint the model before certain parts such as the leg armour plates are assembled.
The copyright on the model designs and components within
this box is the exclusive property of Games Workshop Ltd.
Copyright Games Workshop Ltd., 2002. All rights reserved.
Product code : IAW001
Forge World, Games Workshop, Willow Road, Lenton, Nottingham, NG7 2WS, UK. Tel. 0044 (0)115 916 8177
WOLF CLASS LUCIUS PATTERN
WARHOUND TITAN
LEGS
FRONT VIEW
LOWER THIGH
RECOMMENDED ORDER
OF ASSEMBLY
FEET
SHEET 2 OF 6
LEGS
TORSO
HEAD
WEAPONS
DETAILS
KNEE PISTON PART 1
BOTH LEGS AND FEET ARE ASSEMBLED
WITH AN IDENTICAL SET OF PIECES
KNEE PISTON PART 2
ASSEMBLY OPTIONS
Armour mount on leg must face forward
LOWER LEG
LEGS REAR VIEW
HIPS
HIP JOINT
UPPER THIGH
ANKLE PISTON PART 2
ASSEMBLY OPTIONS
Cut all pistons to required length
depending on leg position.
ANKLE PISTON PART 1
REAR THIGH
PISTON PART 1
REAR THIGH
PISTON PART 2
HIP
PISTON PART 1
HIP
PISTON PART 2
FOOT ASSEMBLY
The copyright on the model designs and components within
this box is the exclusive property of Games Workshop Ltd.
Copyright Games Workshop Ltd., 2002. All rights reserved.
Forge World, Games Workshop, Willow Road, Lenton, Nottingham, NG7 2WS, UK. Tel. 0044 (0)115 916 8177
WOLF CLASS LUCIUS PATTERN
WARHOUND TITAN
SHEET 3 OF 6
RECOMMENDED ORDER
OF ASSEMBLY
FEET
LEGS
BODY REAR
TORSO
HEAD
WEAPONS
DETAILS
SERVITOR
ADEPTUS MECHANICUS
SHRINE
DOORWAY
LEFT CARAPACE
RIGHT CARAPACE
MAIN BODY
ELEVATOR WINCH
MAIN BODY
ASSEMBLY
SERVITOR
IMPERIAL
COMMISSIONING
PLATE
CREW ELEVATOR
The copyright on the model designs and components within
this box is the exclusive property of Games Workshop Ltd.
Copyright Games Workshop Ltd., 2002. All rights reserved.
Forge World, Games Workshop, Willow Road, Lenton, Nottingham, NG7 2WS, UK. Tel. 0044 (0)115 916 8177
WOLF CLASS LUCIUS PATTERN
WARHOUND TITAN
RECOMMENDED ORDER
OF ASSEMBLY
FEET
LEGS
TORSO
SHEET 4 OF 6
The empty chair can replace the chair
with the Princeps if you do not
wish to have the crew in your Titan
or wish to create your own commander
HEAD
WEAPONS
DETAILS
WALL PANEL1
PRINCEPS
HEAD RESTS
WALL PANEL 2
MODERATAI
SERVO SKULLS
Four included in the kit
MODERATAI
HEAD BASE
The copyright on the model designs and components within
this box is the exclusive property of Games Workshop Ltd.
Copyright Games Workshop Ltd., 2002. All rights reserved.
Forge World, Games Workshop, Willow Road, Lenton, Nottingham, NG7 2WS, UK. Tel. 0044 (0)115 916 8177
WOLF CLASS LUCIUS PATTERN
WARHOUND TITAN
RECOMMENDED ORDER
OF ASSEMBLY
FEET
LEGS
TORSO
HEAD
SHEET 5 OF 6
HEAD SHIELD
WEAPONS
DETAILS
CABLE
CONNECTORS
GUN SIGHT
Included in the kit are
several lengths of rubber
cabling. These need to be
cut to the required
length and positioned
between the head and
weapons and the body.
A cable connector is
fitted to the end of each
gun cable and one end
of each head cable.
TURBO LASER BARRELS
TURBO LASER ASSEMBLY
CABLE PORTS
HEAD COLLAR
PLASMA
BLASTGUN
CABLE &
CABLE CONNECTORS
WEAPON ARM
HEAD ASSEMBLY
BODY ROOF ASSEMBLY
ETCHED STEEL GRILLE
BODY ROOF
PLASMA
CYLINDERS
CABLES,
CABLE PORTS
&
CABLE CONNECTORS
The copyright on the model designs and components within
this box is the exclusive property of Games Workshop Ltd.
Copyright Games Workshop Ltd., 2002. All rights reserved.
VENTILATOR BANK
SERVITOR HATCHES
NOTE
Insert steel grille between
BODY ROOF and
VENTILATOR BANK
CENSER
Forge World, Games Workshop, Willow Road, Lenton, Nottingham, NG7 2WS, UK. Tel. 0044 (0)115 916 8177
WOLF CLASS LUCIUS PATTERN
WARHOUND TITAN
RECOMMENDED ORDER
OF ASSEMBLY
SHEET 6 OF 6
UPPER HATCHES
Included in the kit are various symbols & seals.
View the surrounding pictures to see their suggested position
or select a position of your own.
Also included is a sheet of clear plastic which can be cut to the
required shape to produce windows for the head.
FEET
LEGS
TORSO
HEAD
WEAPONS
DETAILS
MAIN
VENTS
REACTOR
EXHAUSTS
VOID SHIELD
PROJECTORS
FRONT ROOF
WAIST ARMOUR
UPPER
LEG ARMOUR
HEAD TOP
LOWER
LEG ARMOUR
The copyright on the model designs and components within
this box is the exclusive property of Games Workshop Ltd.
Copyright Games Workshop Ltd., 2002. All rights reserved.
Forge World, Games Workshop, Willow Road, Lenton, Nottingham, NG7 2WS, UK. Tel. 0044 (0)115 916 8177