7" TFT LCD COLOR Rear Vision Monitor

Transcription

OWNER'S MANUAL
* PLEASE READ CAREFULLY BEFORE USING AND KEEP WELL.
7" TFT LCD COLOR
Rear Vision Monitor
Model:
ZM-CRV17NP
ZM-C RV27NP
ZM-C RV47NP
ZM-CRVQ47NP
Owner's Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your dealer regarding this product.
Model No. ZM-CRV17NP / ZM-CRV27NP / ZM-CRV47NP / ZM-CRVQ47NP
Serial No.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electric shock, do not open the cabinet. Refer servicing to qualified personnel only.
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
You are cautioned that any changes or modifications not express approved in this manual could void
your authority to operate this equipment.
2
INDEX
m
FEATURES ---------------------------------------------------------------------- 4
m
SUGGESTIONS ----------------------------------------------------------------- 5
m
[ZM-CRV17NP/ZM-CRV27NP/ZM-CRV47NP]
OPERATIONS ----------------------------------------------------------------- 6 ~10
m
[ZM-CRVQ47NP]
OPERATIONS
---------------------------------------------------------------- 11 ~16
m
INSTALLATION ----------------------------------------------------------------- 17
m
SYSTEM CONNECTIONS-------------------------------------------------------- 18 ~21
m
SPECIFICATIONS --------------------------------------------------------------- 22
3
FEATURES
ZM-CRV17NP
ZM-CRV27NP
High Resolution 7 "TFT LCD panel
Free Input Voltage (DC 10V ~ DC 32V)
NTSC / PAL Compatibility
1 Camera Input / 1 AV Input
2 Camera Inputs
Automatic Picture Display
(1 Triggering functions)
Automatic Brightness Sensor
(DAY/NIGHT)
(DAY/NIGHT)
Built-in Speaker
Built-in Speaker
OSD with μ-com
OSD with μ-com
ZM-CRVQ47NP
ZM-CRV47NP
4 Camera Inputs
4 Camera Inputs/
1AV Input/1Video Output
Single / Split / Triple / Quad Display Modes
(DAY/NIGHT)
Built-in Speaker
(DAY/NIGHT)
OSD with μ-com
Built-in Speaker
OSD with μ-com
4
SUGGESTIONS
TFT LCD Color Monitor
Safety
- Use only DC 10V to 32V.
- In case that dust or liquid was soaked into the case, please turn off power and
consult the experienced technician before using.
- Do not cover air duct for preventing from considerable rise in temperature.
Installation
- Do not install the unit in an extremely hot or humid place
(radiator, air duct, etc.) or in a place subject to direct sunlight, excessive dust,
mechanical vibration or shock.
General cleaning infor mation
- If your vehicle has been parked in direct sun light resulting in a considerable
rise in temperature inside the vehicle, allow the unit to cool off before operating.
- Clean the unit with a slightly damp soft cloth. Use a mild household detergent.
Never use strong solvents such as thinner or benzine as they might damage
the finish of the unit.
5
Model no : ZM-CRV17NP/ZM-CRV27NP/ZM-CRV47NP
OPERATIONS
1. POWER
-Press once to turn unit on
-Press again to turn unit off
2. MENU
HOT KEY Function
-Press MENU button to adjust Bright, Contrast, Color or Tint
-SELECTABLE OSD MENU DISAPPEARS WITHIN 5 SECONDS IF
THERE IS NO NEW BUTTON PRESSED.
M
DN
Short Key
(less than 0.5sec)
M
Ch ang e th e level
UP
32
-
BRIGHT
32
-
CO NT RA ST
41
-
COLOR
48
+
R
TINT
41
G
+
COLOR
VOLUME
+
CONTRAST
-
BRIGHT
+
VOLUME
PAL MODE
NTSC MODE
TINT
6
OPERATIONS
3. SELECT
Use SELECT button to select the display image.
SEL
ZM-CRV17NP : CAM1
ZM-CRV27NP : CAM1
ZM-CRV47NP : CAM1
AV
CAM2
CAM2
CAM1
CAM1
CAM3
AV....
CAM2....
CAM4
CAM1....
Use SELECT button to select the option in SET UP MENU.
4. UP/DN
DN
UP
5.
Use UP/ DN button to adjust Brightness, Contrast, Color
or Tint level.
- Press UP button to increase Brightness, Contrast, Color
or Tint level.
- Press DN button to decrease Brightness, Contrast, Color
or Tint level.
Pressing "DN", "UP" buttons adjust camera position
(Available on "TILT CAMERA" only)
-/+
+
Use + / - button to adjust speaker volume.
- Press - to decrease speaker volume.
- Press + to increase speaker volume.
Use + / - button to adjust setting or
navigate through the menu.
6. DAY/NIGHT SENSOR
Automatic Brightness Control
- The brightness of the monitor is adjusted automatically
with the CDS according to the circumstance.
(It works only when DAY / NIGHT option is set as "AUTO"
in menu.)
7. REMOTE-CONTROLLER SENSOR
- The monitor is operated by a remote-controller.
- Point the remote-controller towards the sensor on the front of
the monitor in order to operate it. (N/A ZM-CRV17NP)
7
OPERATIONS
-- SETUP MENU -1.CAMERA SORT
2.NORMAL / MIRROR
3.TRIGGER DELAY
4.CAMERA NAME
5.SCALE MODE
6.ADVANCED MENU
7.AUTO SCAN
SET UP MENU
- PRESS MENU BUTTON FOR A WHILE (OVER 2 SEC.) TO ENTER
SETUP MENU.
- SELECTABLE OSD MENU DISAPPEARS WITHIN 5 SECONDS IF
1. CAMERA SORT
[ZM-CRV17NP]
[ZM-CRV27NP]
[ZM-CRV47NP]
1.CAMERA SORT
CAM1 :[NORMAL / SHUTTER / TILT]
1. CAMERA SORT
CAM1 :[ NORMAL / SHUTTER]
CAM2 :[NORMAL / SHUTTER]
1. CAMERA SORT
CAM1 :[ NORMAL / SHUTTER]
M
enter
M
SEL
up / down move
option setting
select
exit
2. NORMAL / MIRROR
[ZM-CRV17NP]
[ZM-CRV27NP]
[ZM-CRV47NP]
2.NORMAL/ MIRROR
CAM1 :[NORMAL;MIRROR]
A U X :[NORMAL;MIRROR]
2.NORMAL/ MIRROR
2.NORMAL/ MIRROR
M
enter
M
SEL
up / down move
option setting
select
exit
- Each camera's Normal / Mirror view can be selected.
3. TRIGGER DELAY
[ZM-CRV17NP]
3.TRIGGER DELAY
TRIGGER1 :[0 SEC TO 20 SEC]
[ZM-CRV27NP]
[ZM-CRV47NP]
3.TRIGGER DELAY
3.TRIGGER DELAY
M
enter
M
SEL
up / down move
option setting
select
8
exit
OPERATIONS
- 1/2/4 Trigger(ZM-CRV17NP/ZM-CRV27NP/ZM-CRV47NP) signals
can be connected and each trigger source can be selected.
4. CAMERA NAME
[ZM-CRV17NP]
4.CAMERA NAME
CAM 1 :[0~9,a~z,A~Z]ETC
A U X :[0~9,a~z,A~Z]ETC
M
[ZM-CRV27NP]
[ZM-CRV47NP]
4.CAMERA NAME
CAM1 :[0~9,a~z,A~Z]ETC
4.CAMERA NAME
CAM 1 :[0~9,a~z,A~Z]ETC
SEL
enter
up / down move
option setting
select
SEL
M
select
exit
5. SCALE MODE
[ZM-CRV17NP]
[ZM-CRV27NP]
[ZM-CRV47NP]
5. SCALE MODE
DISPLAY MODE : [NONE/CA1]
CAM1 SCALE : [SCALE1~SCALE4]
5. SCALE MODE
DISPLAY MODE : [NONE/CA1/CA2/ALL]
DISPLAY MODE : [NONE/CA1/CA2/CA3/CA4/ALL]
5. SCALE MODE
SCALE1
SCALE2
SCALE3
SCALE4
M
enter
SCALE1
SCALE2
SCALE3
SCALE4
M
SEL
up / down move
select
SCALE1
SCALE2
SCALE3
SCALE4
option setting
exit
move cursor
option setting
6. ADVANCED MENU
6. ADVANCED MENU
1.DISPLAY : [NORMAL/FULL]
M
M
SEL
2.UP/DOWN:[UP/DOWN]
3.DAY / NIGHT CONTROL
enter
up / down move
4.AUTO POWER : [ON/OFF]
5.LANGUAGE
9
select
option setting
exit
OPERATIONS
6.1 DISPLAY
FULL
- Display the image in the ratio of 16:9.
FULL DISPLAY
NORMAL
- Display the image on the screen in the ratio of 4:3.
NORMAL DISPLAY
6.2 UP/DOWN
- Converted image display (top and bottom)
6.3 DAY/NIGHT CONTROL
- DAY/NIGHT : Select DAY/NIGHT ON / OFF / AUTO
- DAY/NIGHT LEVEL: Adjust the sensitiveness of DAY/NIGHT level.
- DAY/NIGHT BRIGHT: Adjust the BRIGHTNESS level.
6.4 AUTO POWER
- When "ON" is selected, turning the ignition key on leads the monitor to
POWER-ON mode.
- When "OFF" is selected, turning the ignition key on leads the monitor to
STAND-BY mode.
6.5 LANGUAGE
- Multi lingual OSD can be selected.
7. AUTO SCAN
- The auto scanning time of each camera can be adjusted (0 ~ 20 sec).
10
Model no : ZM-CRVQ47NP
OPERATIONS
1. POWER
-Press once to turn unit on
-Press again to turn unit off
2. MENU
M
-Press once to enter main menu mode
-Press again to exit menu mode
-SELECTABLE OSD MENU DISAPPEARS WITHIN 5 SECONDS IF
3. SELECT
Use SELECT button to select the display image.
SEL
ZM-CRVQ47NP : CAM1
CAM2
AUX
2SPLIT
CAM3
SPLIT
CAM4
QUAD
CAM1
.....
Use SELECT button to select option.
Use SELECT button for PAUSE in AUTOSCAN mode.
4. UP/DN
DN
While in Menu mode, the "UP" and "DN" buttons navigate through
the available menu options.
UP
Pressing "DN", "UP" buttons adjust camera position
(Available on "TILT CAMERA" only)
11
OPERATIONS
5.
-/+
Use + / - button to adjust speaker volume.
- Press - to decrease speaker volume.
- Press + to increase speaker volume.
+
Use + / - button to adjust setting in
certain Menu modes.
6. DAY/NIGHT SENSOR
Automatic Brightness Control
- The brightness of the monitor is adjusted automatically
with the CDS according to the circumstance.
(It works only when DAY / NIGHT option is set as "AUTO"
in menu.)
7. REMOTE-CONTROLLER SENSOR
- The monitor is operated by a remote-controller.
- Point the remote-controller towards the sensor on the front of
the monitor in order to operate it.
MAIN MENU
MAIN MENU
BRIGHTNESS
CONTRAST
COLOR
TINT
INPUT SETUP
AUTO-SCAN
SPLIT SCREEN
DISTANCE MARKERS
ADVANCED MENU
PRESS TO NAVIGATE UP/DOWN
SEL
M
Fig. 1 Main menu
PRESS TO EXIT MAIN MENU
PRESS TO GO BACK TO
MAIN MENU
PRESS TO ADJUST +/-
SELECT
'BRIGHTNESS'
BRIGHTNESS
M
12
PRESS TO GO BACK TO
MAIN MENU
OPERATIONS
PRESS TO ADJUST +/-
SELECT
'CONTRAST'
CONTRAST
M
PRESS TO GO BACK TO
MAIN MENU
PRESS TO ADJUST +/-
SELECT
'COLOR'
COLOR
M
PRESS TO GO BACK TO
MAIN MENU
PRESS TO ADJUST +/-
SELECT
"TINT"
TINT
M
INPUT SETUP
SELECT
"INPUT SETUP"
PRESS TO GO BACK TO
MAIN MENU
PRESS TO ADJUST +/-
CH1: [ON(NORMAL) ; ON(MIRROR) ; OFF]
SOURCE NAME
M
PRESS TO GO BACK TO
MAIN MENU
SELECT
'SOURCE NAME'
SOURCE NAME
CH 1:CH 1 _ _ _ _ _ _ _ _
CH 2:CH 2 _ _ _ _ _ _ _ _
CH 3:CH 3 _ _ _ _ _ _ _ _
CH 4: CH 4_ _ _ _ _ _ _ _
SEL
PRESS TO SELECT CHANNEL TO
RENAME
PRESS TO MOVE TO NEXT LETTER
PRESS TO SCROLL THROUGH
ALPHA-NUMERIC CHARACTER SET
M
13
PRESS TO GO BACK TO
INPUT SETUP MENU
OPERATIONS
AUTO SCAN
SELECT
"AUTO - SCAN"
THROUGH MENU OPTIONS
AUTO SCAN: [OFF ; ON]
AUTO SCAN TIME: [1 sec. to 10 sec.]
SEL
M
PRESS TO GO BACK TO
MAIN MENU
SPLIT SCREEN
SELECT
"SPLIT
SCREEN"
PRESS TO TOGGLE THROUGH OR
SELECT MENU OPTION
2 - WAY
3 - WAY
4 - WAY
SEL
SELECT
"2-WAY"
M
SELECT MENU OPTION
PRESS TO GO BACK TO
MAIN MENU
2-WAY SPLIT
2-WAY SPL2T : [DISPLAY ; SKIP]
SOURCE 1: [CH1 ; CH2 ; CH3 ; CH4]
AUDIO: [SOURCE1 ; SOURCE2]
SEL
M
SELECT MENU SETTING
PRESS TO GO BACK TO
SPLIT SCREEN MENU
3-WAY SPLIT
3-WAY SPL2T : [DISPLAY ; SKIP]
AUDIO: [SOURCE1 ; SOURCE2 ; SOURCE3]
SEL
M
14
SELECT OPTION SETTING
PRESS TO GO BACK TO
SPLIT SCREEN MENU
OPERATIONS
4-WAY SPLIT
QUAD SPLIT : [DISPLAY ; SKIP]
AUDIO: [SOURCE1 ; SOURCE2 ; SOURCE3]
SEL
M
SEL
DISTANCE MARKERS
SELECT
"DISTANCE
MARKERS"
PRESS TO GO BACK TO
SPLIT SCREEN MENU
SELECT MENU OPTION
CA 1 TRIGGER: [ LEVEL1, LEVEL2,OFF ]
M
PRESS TO GO BACK TO
MAIN MENU
ADVANCED MENU
SELECT
"ADVANCED
MENU"
SET UP TRIGGER PRIORITY
TRIGGER DELAY : 3SEC
PRESET
LANGUAGE : ENGLISH
AUX DISPLAY : ON
SEL
SETUP DAY & NIGHT
CANERA1 SORT : NORMAL
TRIGGER5 SOURCE : SPLIT2
M
PRESS TO GO BACK TO
MAIN MENU
SELECT
‘SET UP TRIGGER PRORITY’
1ST PRIORITY : CH 1 [CH2;CH3;CH4;SPLIT]
2ND PRIORITY : CH 2 [CH3;CH4;SPLIT;CH1]
3RD PRIORITY : CH 3 [CH4;SPLIT;CH1;CH2]
4TH PRIORITY : CH 4 [SPLIT;CH1;CH2;CH3]
PRESS TO SCROLL THROUGH
ALPHA-NUMERIC CHARACTER SET
5TH PRIORITY : SPLIT [CH1;CH2;CH3;CH4]
SEL
M
SELECT
‘TRIGGER DELAY : 3SEC’
SEL
PRESS TO GO BACK TO
MAIN MENU
TRIGGER DELAY : 0SEC~9SEC
M
15
PRESS TO GO BACK TO
MAIN MENU
OPERATIONS
SELECT
'PRESET’
PRESET
SEL
M
PRESS TO RECALL BRIGHTNESS,
CONTRAST, COLOR AND TINT
PRESS TO GO BACK TO
MAIN MENU
SELECT
‘LANGUAGE : ENGLISH’
LANGUAGE :ENGLISH
SEL
LANGUAGE:[ ENGLISH;.....]
M
PRESS TO GO BACK TO
MAIN MENU
*Multi lingual OSD can be selected.
SELECT
'AUX DISPLAY : ON’
AUX DISPLAY : ON
SEL
AUX DISPLAY: [ ON: OFF]
M
PRESS TO GO BACK TO
MAIN MENU
SELECT
'SET UP DAY&NIGHT’
SET UP DAY&NIGHT
DAY & NIGHT : [AUTO ; DAY ; NIGHT]
DAY & NIGHT BRIGHTNESS : [1~5]
DAY & NIGHT LEVEL : [1~5]
SEL
SELECT
'CAMERA1 SORT:NORMAL’
CAMERA1SORT:NORMAL
M
PRESS TO GO BACK TO
MAIN MENU
SEL
CAMERA1 SORT
:[NORMAL:SHUTTER:TILT-ADJUST:TILT-AUTO]
M
PRESS TO GO BACK TO
MAIN MENU
SEL
SELECT
'TRIGGER5 SOURCE: SPLIT2’
TRIGGER5 SOURCE:SPLIT2
TRIGGER5 SOURCE
:[SPLIT2: SPLIT3: QUAD]
M
16
PRESS TO GO BACK TO
MAIN MENU
INSTALLATION
Install the monitor on a place which can stand more weight
than 5Kg (10.1b.)
- Clean the place before installation.
- Remove the protective paper covering the bottom of the bracket.
- Stick the provided bracket on the surface and fix it firmly with the screws.
Mounting on the floor,
console, etc.
Mounting on the ceiling
- Adjust the angle of the monitor and fasten the handle screws strongly.
Mounting on
the ceiling
Mounting on the floor,
console, etc.
17
ZM-CRV17NP
F USE
B+ (RED)
GROUND (BLACK)
TRIGGER 1 (BLUE)
AUDIO (WHITE)
VIDEO (YELLOW)
REF
SHUTTER CAMERA
(Not supplied)
CAMERA 1.
(Not supplied)
18
WIRE COLOR
DESCRIPTION
1
RED
POWER IN DC (10V to 32V)
2
BLACK
GROUND
3
BLUE
TRIGGER 1 (CA 1) DC9V ~ 32V
ZM-CRV27NP
F USE
B+ (RED)
GROUND (BLACK)
TRIGGER 1 (BLUE)
TRIGGER 2 (BROWN)
CAMERA 1.
(Not supplied)
SHUTTER CAMERA
(Not supplied)
CAMERA 2.
(Not supplied)
SHUTTER CAMERA
(Not supplied)
19
REF
WIRE COLOR
DESCRIPTION
1
RED
2
BLACK
GROUND
3
BLUE
4
BROWN
ZM-CRV47NP
F USE
B+ (RED)
GROUND (BLACK)
TRIGGER 1 (BLUE)
TRIGGER 2 (BROWN)
TRIGGER 3 (GREEN)
TRIGGER 4 (ORANGE)
CAMERA 1.
CAMERA 2.
(Not supplied)
CAMERA 3.
CAMERA 4.
REF
SHUTTER CAMERA
(Not supplied)
20
WIRE COLOR
DESCRIPTION
1
RED
2
BLACK
3
BLUE
TRIGGER 1(CA 1) DC9V ~ 32V
4
BROWN
5
GREEN
6
ORANGE
GROUND
ZM-CRVQ47NP
FUSE
B+ (RED)
GROUND (BLACK)
TRIGGER 1 (BLUE)
TRIGGER 2 (BROWN)
TRIGGER 3 (GREEN)
TRIGGER 4 (ORANGE)
TRIGGER 5 (YELLOW)
VIDEO INPUT (YELLOW)
AUDIO INPUT (WHITE)
CAMERA 1.
CAMERA 2.
(Not supplied)
CAMERA 3.
VIDEO OUTPUT (YELLOW)
CAMERA 4.
REF
SHUTTER CAMERA
(Not supplied)
21
WIRE COLOR
DESCRIPTION
1
RED
2
BLACK
GROUND
3
BLUE
4
BROWN
5
GREEN
6
ORANGE
7
YELLOW
TRIGGER 5(SPLIT) DC9V ~ 32V
SPECIFICATIONS
Model No.
ZM-CRV17NP
ZM-CRV17NP
ZM-CRV27NP
Power Input
ZM-CRV47NP
DC 10V~32V
Max 20 Watt.
Max 12 Watt.
Power Cons.
NTSC, PALVideo signal Compatible
Video System
Sync. System
Internal
LCD panel size
7.0 Inch Wide Diagonal, 16:9 Format, Color
Field of view
Top:30°, Bottom:60°, Left: 60°, Right:60°(Typical)
Screen Size
154(W) X 87(H)mm
Resolution
336,960 Pixels (480 * 3(RGB) * 234)
Color configuration
R.G.B.Stripe
Auto con./bright.
Day & Night Sensor Include
Bright, Contrast, Color,
O.S.D control
Power Connecter
Tint, CA select (CA1/CA2/CA3/CA4)
Tint, CA select (CA1/AUX)
Mirror/Normal,
Scale on/off, Volume
Day/Night mode selector,
Tint, CA select (CA1/CA2)
Mirror/Normal,
Mirror/Normal,
Auto scan, TRIG set
Auto scan, TRIG set
Auto scan, TRIG set
8Pin Large Connecter
Tint, CA select (CA1/CA2/CA3/CA4/
SPLIT1/SPLIT2/SPLIT3/SPLIT4/AUX)
Mirror/Normal,
Auto scan, TRIG set
Speaker
Approx. 23pi, Impedance: 8Ω, 0.3 Watt Max
Operating temp.
-10 C ~ 60 C( 14 F ~140 F)
Storage temperature
-30 C ~ 80 C( -22 F ~185 F)
Ambient condition
Ip54 (Option)
Vibration
5.5G
Dimensions
197(W)X 135(H) X 30.0 (D) mm
7.75(W)X 5.31(H)X 1.18(D)inch
Weight
Approx. 650 g
Supplied acc'y
ZM-CRVQ47NP
Stand Bracket (1)
Instruction Manual (1)
Removable Sun Visor (1)
Remote Controller (1) [N/A ZM-CRV17NP]
22
THIS SYMBOL MEANS DO NOT DISPOSE OF
AS MUNICIPAL WASTE.
RE-USE OR RECYCLE WHEREVER POSSIBLE.
ELECTRICAL / ELECTRONIC COMPONENTS MAY
CONTAIN SUBSTANCES WHICH ARE HARMFUL TO
THE ENVIRONMENT.
FOR ENVIRONMENTALLY SOUND METHODS OF
DISPOSAL, PLEASE CONTACT YOUR LOCAL
GOVERNMENT AUTHORITY.
printed in korea

7" TFT LCD COLOR Rear Vision Monitor

Transcription

Similar documents