Distribution Automation

Delivering innovative
and integrated Utility,
Industrial and Substation
Solutions…
PT Guna Elektro (GAE) is an Authorized Distributor and Value Added
Reseller based in Jakarta,Indonesia, and has been in the electrical,
mechanical and telecommunication field for more than 50 years.
Our solutions are
your success…
We help you to optimize and protect existing assets while improving
substation electrical system performance, reliability and safety.
GAE provides sales, engineering, installation and support services to
major utility, industrial and commercial customers throughout Indonesia.
• Complete engineering, manufacturing, installation & commissioning
services
• Substation automation controllers and equipment reduce
maintenance cost
• Energy management systems reduce outages through managing
reliability and performance of power equipment
• Digital relays for generation, transmission and distribution, protect
and monitor power equipment to ensure peak performance and
reduced down time
• Remote site monitoring and control to streamline operations and
reduce substation trips
• Power quality metering to protect downstream devices from surges
and disruptions
We invite you to
explore
our offerings…
Integrated Solutions
• Complete Substation Automation System
• Protection and Control Relays, Meters and Switches
• Network Communication for Industrial & Mission Critical Applications
• Transformer Portable and On-Line Monitoring
• RTU, SCADA & Energy Management System
• Portable Test Instrument for Maintenance of Electric Power Equipment
• Medium & Low Voltage Intelligent Switchgear & Smart Motor Control
Center
2
New concept...
Advanced Protection and Control
is the brain of Smart Grid
We offer a wide range of innovative solutions for Utility, Industrial and Substation
customers.
Protection & Control
Communications
• Generator Protection
• Advanced Metering Infrastructure
• Transmission Protection
• Distributed Generation Trip Control
• Distribution Protection
• Wireless Data Acquisition
• IEC 61850 Process Bus
• Wireless LAN Extension
• Energy Management & Metering
• Wireless Backhaul
• Recloser Control
• Fiber Optic Pilot Schemes
• Load Management
• Load Management
• Microgrid Control
• Wide Area Communications
• Synchrophasors
Power Quality
Power Sensing
• Paralleling Switchgear
• Current Transformers
• Fuseless Capacitor
• Voltage Transformers
• Series Compensation Capacitor
• Power Transformers
• Control & Test Switches
3
IEC 61850 Substation Automation
System Architecture
Gateway
HMI (Human Machine Interface)
A secure, substation-hardened gateway
that collects metering, status, event, and
fault report data from serial or LAN based
Intelligent substation devices.
HMI Software enables operators to
manage Substation and Industrial process
control via a computer-based graphical
user interface
Engineering Station
Ethernet Switch
EnerVista LAUNCHPAD Device setup
and document management toolset.
Ethernet Communications for Industrial
Automation, Power Utility, and Traffic
Control markets
Viewpoint Engineer Logic, IEC 61850
system configuration and real
time
monitoring
IEDs
UR Plus and UR Family simplified power
management for the protection of critical
assets.
Viewpoint Maintenance Security
auditing, device health reporting, and
fault data retrieval
650 Family Advanced Protection System
and Bay Controller.
Viewpoint Monitoring Easy -to-use
monitoring and data recording
Hydran M2 compact affordable all-in-one
on-line transformer-monitoring device.
Integrator OPC Connectivity to
automation and historian applications
Transfix 8-gas on-line transformer DGA
monitoring unit
RTU (Remote Terminal Unit)
MO 150 dynamic, intelligent transformer
monitoring system
Microprocessor-controlled electronic
device that interfaces objects in the
physical world to a distributed control
system or SCADA .
Bay Controller
IED that provide a
. wide range of control
and automation
4
Across all
UR family…
Universal Relay Family
Protecting utility and industrial electrical assets while increasing uptime and reducing
life cycle costs
Modular Construction
… Flexibility and Easily Upgradeable
Modules
• Power Supply
• Central Processor (CPU) & Comms
• CT/VT Inputs
• Digital Inputs/Outputs
19’’ Chassis
(4RU high)
Bright LED
Annunciator
Easily
Labeled
LED’s
• Transducer Inputs (DCmA, RTD)
• Inter Relay Communications
Large Bright
Display
Secure Door
Locking
• Common hardware
• Plug and play modules
• Reduced stock of spare parts
• Reduced maintenance cost
16 User-Programmable
Pushbuttons
3 User-Push
RS232
buttons Communications
Port
IEC 61850
Convergence of multiple devices
… Reducing external devices, wiring, and commissioning costs
Protection Relay
Remote
Thermal Unit
Meters
Programmable
Logic Controller
Auxiliary
Devices
Communication
Processor
Multiple devices/multiple tools/multiple vendors
Built in
With other products
With GE Multilin UR
• Metering
• Automation
• Annunciator
• Protection
• Communications
• Synchrophasor
• Control
• Fault Recording
5
Across all
UR family…
UR FlexLogic
… Customized Control and Operation
• Real-time status of internal logic
and operands
• Easy troubleshooting of wiring and
logic problems
• Drag-and-Drop logic configuration
• Boolean logic operations
• Executed every 2ms.
• Connect logic equations directly to
Outputs and LED’s
EnerVista
. . . Easy to use, Single Location for all GE Multilin resources
Settings configuration
• Communicate with multiple URs at the same time
• Configure settings both on-line and off-line
• Copy and paste settings
• Quick connect communications
• Common look and feel for all products setup
programs
Metering
• Live actual and Synchrophasor measurements
viewer for multiple URs
• Status of all inputs and outputs
• Real-time monitoring of Phasor diagrams
Troubleshooting
• Analyzing of event records (Search and sorts)
• Powerful Synchrophasor and Oscillography
COMTRADE viewer
• Real-time data logging
• Compare relay settings with setting file
Applications
. . . Covering all Protection and Control
• Generator Management (G30, G60)
• Feeder Management (F60)
• Line Distance (D30, D60)
• Multiple Feeder Management (F35)
• Line Current Differential (L30, L90)
• Motor Management (M60)
• Bus Differential System (B30, B90)
• Controller (C30)
• Transformer Management (T35, T60)
• Capacitor Bank Protection & Control (C70)
• Breaker Management (C60)
• Network Stability & Synchrophasor
Measurement (N60)
6
Merging units…
HardFiber
IEC 61850 Process Bus Solution
The Multilin HardFiber™ System can save Utilities up to 50% in total P&C installation
and maintenance costs by replacing thousands of copper wires with IEC 61850
digital communications over a few fiber optic cables.
Save up To 50% of your Protection & Control Labor...
Traditional Substation
Materials
Labor
• Relays
• Head Office Engineering and Drafting
• Copper Cabling
• Construction & Installation
• Terminal Blocks
• Commissioning & Testing
• Test Switches
• On-going Maintenance
+
=
• Misc. Materials
Traditional substation designs require large amounts of skilled labor to create engineering drawings, pull and
terminate miles of copper cables, and test and troubleshoot thousands of connections.
HardFiber Substation
Materials
Labor
• Relays
• Head Office Engineering and Drafting
+
• Cabling
• Construction & Installation
• Patch Panel
• Commissioning & Testing
• On-going Maintenance
=
The HardFiber System replaces labor-intensive processes with quick installation,
off-the-shelf equipment and made-to-order cables.
Appears to UR CPU as up to 3 CT/VT Input modules
Includes 8 fiber ports for up to 8 HardFibers
Compatible with
Bricks
(HardFiber/Merging Unit)
Redundant power supply
1 communications module
1 conventional contact I/O module
Supports
6 AC redundant current/voltage banks, each with 4 channels
(A, B, C, X)
8 RTD and 8 TDR (transducer) inputs
40 contact inputs
32 SSR outputs, 16 form C outputs, 8 latching outputs
16 shared inputs, 16 shared outputs
Relay
Patch Panel
CPU
7
New generation
of solutions…
UR Plus Solutions
•
•
•
•
Built -on proven UR platform and application experience
Exceeding customer needs and emerging trends
One solution for protection, control, monitoring & automation
Tested for environmental & safety standards of industry & utility
D90Plus – Sub-Cycle Distance Protection
Ease of use & graphical visualization
•
•
•
C90Plus – Automation Logic Controller
Pre -programmed single line diagrams
- Breaker control
Single keystroke for viewing information
Pre -programmed display screens
- Metering display
- Voltage & current phasors
- DFR display
- Transient, Disturbance recorder
- Fault report, SOE view
- Equipment manager display
- Maintenance display
- Diagnostics summary
- I/O status
Replace LEDs & Separate Annunciator in Panels
• Monitor substation/device events
using multi -language annunciator
• 12 to 48 alarms per page,
max of 8 pages
Reduce Wiring, Commissioning & Capital Costs
Multiple Devices/
vendors/Programs
One Vendor
URPlus
UR Plus powered by built-in
• Sub -cycle Protection
Convergence
& integration
• Colored HMI
• Alarm Annunciator
• Power Metering
• Control
• Automation
• Communications
• Equipment Manager
• Distributed I/O
8
B95 Plus Bus Protection Systems
Reduce the time and cost of field wiring for Bus Protection
The Multilin™ B95Plus Bus Protection System is the ideal solution for one of the biggest
challenges for large bus protection: the time and cost involved in the design, installation
and commissioning of the field wiring between measurements from the switchyard and
the bus relay in the control room.
Applications
configuration…
Merging Unit
Merging Unit
Key Benefits
Applications
•
Reduce field wiring costs through the
use of rugged bay units (HardFiber
Bricks) located in the yard.
•
Reconfigurable multi-section bus bar
with up to 24 feeders
•
•
No configuration of bay units necessary.
Simple configuration of the bus replica.
Retrofit and greenfield installations for
power generation, transmission and
distribution systems
•
Bricks can interface with any compliant
device.
•
•
Supports up to 16 Bricks and 24 Bus
Sources.
Reconfigurable bus bars for single bus,
breaker-and -a-half and double bus with
and without bus couplers
•
Air -insulated and GIS stations
•
Protect six three-phase differential zones
with one central device
9
U90 Plus Microgrid Controller
Optimized Dispatch of Distributed Energy Resources
The Microgrid Control System automates and optimizes the use of Distributed Energy.
Resources (DER) such as conventional generators, renewable-based generators,
energy storage devices, and dispatchable loads. Optimization of a microgrid balances
dispatchable DERs with the availability of renewable sources to minimize energy cost
and thus emission cost.
Control System Architecture And Optimization Sequence…
Step 1 – U90Plus gathers data from all DERs and loads through wireless communications
Step 2 – U90Plus determines optimal use of DER
Step 3 – U90Plus sends control commands to each DER through a wireless radio
Key Benefits
•
Reduce field wiring costs through the
use of rugged bay units (HardFiber
Bricks) located in the yard.
•
No configuration of bay units
necessary. Simple configuration of the
bus replica.
•
Bricks can interface with any
compliant device.
•
Supports up to 16 Bricks and 24 Bus
Sources.
•
Protect six three -phase differential
zones with one central device
Applications
10
•
Rural micro grid optimization
optimizing use of conventional
generators and renewable energy
sources
•
Commercial & industrial systems
reliability – sustain backup generators
during grid out ages by shedding
loads
•
Utility services enhancement Aggregated and controlled DERs help
solve utility business challenges such
as reliability, and transmission
congestions
The Multilin…
Protection & Control Family Overview
UR & UR Plus, SR, SR 3 Series, 650 Family
650 Family
URPlus
UR Family
MIF II
MM 300
Metering
Generator Protection System
G60, G30, 489, G650, W650, MIG II, MIW II
Transformer Protection
T60, 745, T35, 345
Transmission Line Protection
L90, L30, L60, D90 Plus, D60, D30
Bus Protection
B95Plus , B90, B30, MIB, HID
Distribution Feeder Protection
F60, F35, 750, 760, F650, 350, MIF II, 735, 737, FM2,
URC
Motor Protection
M60, 469, 369, 339, MM300, MM200, MM2, SPM
Specialized Protection and Control
C90Plus, C70, C60, C30, N60, U90 Plus, MIV II, MIN II,
RRTD, DDFR, DGT
Metering
EPM 9900, EPM 9800, EPM 9650, EPM9450, EPM7100, EPM6100,
EPM 7000, EPM 6000, EPM 5500, EPM 2200, EPM 2000, PQM II
Note: Conformal coating for protection in chemically harsh and high humidity environments is
available upon request
11
Distribution Automation
Advanced visualization technologies enable the efficient recovery of distribution systems
utilizing fault isolation, sectionalization and power system restoration capacities within our
wide range of distribution assets, controllers, and high accuracy measurement devices.
Our high speed wireless capability provides peer-to-peer communications, enabling distribution
utilities to make intelligent decisions, enabling fast and efficient responses to service interruptions.
D400 - DA Substation Based FDIR / FLISR Solution
The D400-DA is a substation based Fault Detection, Isolation, and
Restoration system, designed for improving the reliability of distribution
utility networks.
DGCS - Switch Controller
Integrated fault detection, control, Auto-Sectionalizing functionality, and
greatly improve distribution reliability
DGCR - Recloser Controller
Integrated protection, control, reclosing functionality and greatly improve
distribution reliability
DGCC - Capacitor Bank Controller
Part of a platform of Distribution Automation Controllers is designed to
monitor and provide automated control of capacitor banks in a distribution
network and improves operational effectiveness through a reduction of
system losses
DGCV - Voltage Regulator Controller
Integrated component of a Volt/VAR system, enabling utilities to optimize
grid and operational efficiency is designed to monitor and control voltage
regulators, maintaining voltage levels.
Field RTU
Part of a platform of Distribution Automation Controllers, the Multilin
DGCM Field RTU provides advanced monitoring of low and medium
voltage distribution feeders and is suitable for both pole top and pad
mounted switch devices or transformer feeders.
Feeder Recloser Protection Systems (URC)
Designed to provide distribution feeder protection, control, monitoring and
metering in one integrated package incorporating the high end features of
the F35, F650 or F60 feeder management relays.
12
EnerVistaTM
Simplify your
work process
with…
EnerVistaTM is a leading software tool designed to simplify every aspect of working
with GE Multilin devices and IEC 61850 ready
Tool for Creating Control Logic,
Simulation Testing, and Commissioning
Device Setup & Document
Management Toolset
Communications Server
• OPC/DDE Server
• Send device data to HMI, DCS,
and SCADA systems
Troubleshooting and Reporting Tools
Easy to Use Monitoring and
Data Recording for Small
Systems
Smart Substation
And Master Control...
iFIX with iPower
Utility SCADA and Substation HMI
Developed for electric utilities, including rural cooperatives, municipal authorities and
independent distribution utilities, iFIX with iPower is a proven SCADA solution that’s
improving utilities operations globally.
13
Smarter
with…
Industrial Network Communication
Managed & Unmanaged Ethernet Switches
4K16
6K25e
6KQ
CP80
P62
ESD42
Media Converter Switches & Hubs
TB14H
Dymec Link
Converter
FT14H
CS14
Mobile Ethernet Switches
Power over Ethernet (PoE)
6KM
PES42P
Standards…
IEC 61850
EN50155
ETSI and NEBS L3
NEMA TS-2 & TEES
Industrial Ethernet
Entry Level Hubs and
Switches
(Unmanaged)
Compact Industrial
Switches (Managed)
Managed RSP
Switches
Compact Industrial
Switches (Managed)
Compact Industrial
Switches (Managed)
Modular Industrial
Switches
Power Over Ethernet
Waterproof IP67/IP65
Industrial Switches
Industrial Wireless
LAN
Precision Time
Protocol (PTPv2)
Backbone Switches
Serial to Ethernet
converters
V.24 Digital modules
Composite Video
Transmitters/
Receivers
Fiber Interfaces
Fieldbuses
OZD Profi G12 ATEX 1 is a Profibus FO
repeater certified for use in hazardous
locations
OptoQuick devices
and Hybrid
components
14
Transformer
And Capacitor ...
High Voltage Fuseless Capacitor
Pole Mounted
Pole Mounted Capacitor products are pre-wired, factory
assembled, and shipped ready for pole installation with
single-phase capacitor units. Racks are made of welded
structural aluminium and are suitable for mounting
switches and junction box and cable assembly.
Features
• 150 – 3,600 kVAR
• 2,4 – 34,5 kV
• Oil or vacuum switches, motor or solenoid operated
Sensors …
Open Stack Rack
Series Compensation Capacitor
•
•
•
•
•
• Fixed or Thyristor Controlled
• Increase Long Distance Power Transfer,
Dynamic Stability and Voltage Variation
• 69 – 800 kV
• up to 1,200 MVAR
Lower Power Bills / Improved Power factor
Improved voltage support
Available as externally fused or fuseless
2.4 – 765 kV
1.2 – 600 MVAR
Instrument Transformers & Switches
Current Transformers
• LV Indoor/Outdoor Application up to 600 / 720V
• 600 Volt Bushing Type (BCT)
• MV Indoor / Outdoor 5 - 69kV (ANSI & IEC)
Switches
• Control Switches
• Test Switches
• ANSI/IEC Test Block
Voltage Transformers
• LV 600 / 720 Volt
• MV Indoor / Outdoor 5 – 69kV (ANSI & IEC)
Power Control Component
• Lockout Relays
• Ground Fault Systems
• Voltage Relays
• Capacitor Trip Devices
Control Power Transformers
• Single & Three Phase 5 – 34.5 kV
15
Maintenance …
Testing …
Commissioning …
Portable Test Instruments
Protective Relay Test
System
FREJA 406
Six Current Relay Test
FREJA 306/300
3/6 Current Relay Test
GOOSER
IEC 61850 Test System
SMRT1
Single Phase
Relay Test
SVERKER 750/760
Single Phase Relay Test
SMRT36
Three Phase
Relay Test
Primary Injection
Testing
INGVAR
Max. 5000A output
ODEN A/AT
Max. 13000A
CSU600A/600AT
Micro-ohm Meter
MOM600A/200A
MOM2
DLRO200/600
MJOLNER 600/200
Breaker Test
TM1800
MV to EHV Advance
Breaker Analyzer
DualGround
Provide safety in
Breaker Testing
TM1700
New Technology of
Breaker Analyzer
VIDAR
Vacuum Bottle Tester
EGIL
Powerful economical
MV Breaker Test Set
16
B10E
Ripple Free
Power Supply
SDRM
Applied with TM1800/1700 or EGIL
to provide Static Dynamic
Resistance Measurement
Battery Test Unit
BITE2P
BITE2
BITE3
Battery Impedance Test
up to 7000 Ah
Battery Impedance Test
up to 2000 Ah
BGFT
Fault Tracer
Battery Ground
Torkel 820
(Telecom)
Torkel 840/860
(Utility)
BGL
Battery Ground
Fault Locator
Transformer Diagnostics
FRAX - 101 & FRAX- 150
SFRA Test for Power Transformer
TTR 300
3-Phase Transformer
Turns Ratio Test Sets
TTR 100
Single - Phase
Handheld TTR
IDAX- 300
Insulation Diagnostic Analyzer to
assess moisture content in transformer,
bushing, generator and cables
MCT 1605
Multi -Tap Automatic Current
Transformer Saturation, Ratio and
Polarity Test Set
IDAX-605
High-Precision Capacitance
and Dissipation Factor
Measurement Instrument
OTS-AF Series
60 kV, 80 kV and 100 kV
Automatic Laboratory Oil Test Sets
KF875 and KF-LAB MkII
Karl Fischer Moisture
in Oil Test Set
17
Transformer…
Transformer On-line Monitoring
GE’s Kelman DGA devices enable precise on-line monitoring of transformers
using multiple fault gas1 DGA and offers detailed diagnostics according
to IEEE/IEC standards of any incipient fault detected.
Gas analyzer
Transformer ageing
Transformer faults
1. Hydrogen
(H2), Carbon Monoxide (CO), Carbon Dioxide (CO2), Methane (CH4), Acetylene (C2H2), Ethane (C2H6), Ethylene (C2H4),
Oxygen (O2), Nitrogen (N2)
Multiple Gas
Transformer DGA…
Transfix Plus
Multitrans
• 8 gas + moisture analyser and nitrogen
• Combines TRANSFIX and MO150 in
one enclosure
• Ethernet switch for combined
communications
• 8 gas + moisture analyser
• Monitors up to 3 separate single phase
Transfix
Minitrans
• 3 gas + moisture
• Same core technology as the successful
TRANSFIX
• 8 gas + moisture analyser and nitrogen
• Oil sampling at regular interval,
increasing up to every hour when
caution level reached
Taptrans
• 8 gas + moisture analyser
• Complete Online DGA for Transformer
& Load Tap Changer
• Monitors Main, Selector & Diverter
tanks in one unit
• No oil cross-contamination
Software …
tanks
Features & Benefits
• DGA & Water
• Cutting Edge Technology
• Minimal Maintenance
• Hourly Measurements
• Extensive communication/alarm options
• No membranes, No consumables,
No carrier gas
• Full PERCEPTION integration
Perception
Diagnostic & Trending Software for Oil-filled HV Equipment.
Features & Benefits
• Fully automated DGA data download
• Alarm notification system
• Simplified trending to advanced
diagnostics
• Intuitive/configurable interface
18
Single Gas
Transformer DGA…
The method …
Intellix TM GLA 100
Small, intuitive and easy to install fault gas level
alarm that provides a low cost warning solution to
extend DGA monitoring to the smaller lower end
transformers in your fleet.
Hydran M2
Low Level evolution
50
45
40
HYDRAN 201i Reading PPM
Detection and Monitoring of Key Fault Gases in oil
Monitoring level of moisture
On-line Dynamic Loading model
Prognostics & Diagnostics alarm
35
30
Transformer fault
25
20
15
10
5
0
1-Dec
15-Dec
29-Dec
12-Jan
26-Jan
9-Feb
23-Feb
Date
Sensors …
Hydran M2 with Models
The Hydran M2 with models is an early warning device for detection of primary
faults at transformers and other oil-filled equipment with its on-line fault gas and
moisture sensors.
• Dissolved gas H2 and CO
• Moisture content in oil and insulating
paper
• Winding hot spot temperature
• Insulation aging
• Tap changer position tracking
• Tap changer temperature
• Cooling Status
• Cooling efficiency
Monitoring system…
Intellix MO150 with Models
•
•
•
•
•
•
On -line key gases monitoring
(Hydran M2)
On -Transformer key parameters
monitoring
Control of cooling system available
On-line models and off-line models
Easy commissioning and set -up
Diagnostics & recommendations
Transformer
Data
•
•
•
•
•
•
Intelligent Processor
• Data Acquisition
• Transformer models
19
Various communication options
Analog/digital inputs and outputs
Self diagnostics
Sensor problem detection system
Fail safe cooling control relays
Universal switching power supply
Graphical
Vvvvv
User
v
Interface,
MO150 host
Online …
Intellix TM BMT 300
Bushing and Partial Discharge Monitoring System
• PD activity correlation versus developing key fault gases in the main tank
enabling quicker detection of potential arcing faults which can lead to
catastrophic failures
• One diagnostic software, GE PERCEPTION, for bushing information, PD
activity and DGA data analysis resulting in centralized system transparency
• One -source provider lowers total cost of ownership by minimizing installation,
equipment serviceability and administration burden
Applications Example: HV Grid Substation
Transformer …
Portable DGA
Transport X
Represents an invaluable tool for Asset Management and will increase the
power of any DGA program.
Features & Benefits
• Portable 7 gas analyzer + Moisture
• Accurate, reliable results in a rugged,
easy to use unit
• Touch screen LCD & Printer
• Reduces reliance on lab test
• No Calibration
• Results on-site in minutes
• Built in analysis
20
Applications
•
•
•
•
All sizes of transformers tanks.
Ideal for site intervention teams.
Generation to Distribution transformers.
OLTC and any oil filled equipment.
Awakening your 6th
Sense…
Temperature and Gas Sensing Solutions
LumaSense is the leading provider of temperature and gas sensing equipment to
optimize performance of boilers, furnaces, refineries, substations, transformers,
industrial sensing applications.
Petrochemical
Industry
Power
Generation
Steel Metal
Transmission &
Distribution
Plastic
Glass
BoilerSpection™ is is a revolutionary thermal imaging system with the ability to see
through flames that helps coal plants run more efficiently, extract more energy from
their coal, and increase productivity.
FurnaceSpection™ designed and developed for continuous temperature
measurement inside high temperature furnaces in refining, metals and glass
production, the FurnaceSpection imager provides users a critical tool for improving
process and reducing waste.
LumaSMART Fluoroptic-Based Winding Hot Spot temperature Sensor for
Generation, Transmission and Distribution Transformers.
LumaSHIELD GaAs-Based Winding Hot Spot Temperature Sensor for Transmission
and Distribution Transformers.
LumaSpection™ Automated, Continuous Thermal and Visual Imaging to Identify
Thermal Abnormalities within Electrical Substations and Other Process Control
Systems.
SF6 Leak Detection monitoring Sulfur Hexafluoride (SF6) in the Power Utility
Industry. Accurate, reliable and stable quantitative gas detection solutions based on
Photoacoustic Spectroscopy (PAS) technology for environmental protection and
greenhouse gas reduction.
Quasar Flare Stack Detection Systems are built for continuous duty monitoring of
pilot flame (PM), flared gases (FM) and smoke particulate (SM) from flare stacks.
ThermalSpectionTM Critical Vessel Monitoring system from LumaSense is a turn key
solution for monitoring critical vessels, such as gasifier skin temperature.
Sulfur Recovery Unit (SRU) is a Monitoring Infrared thermometry for sulfur reactors
and other high temperature furnaces.
IMPAC Pyrometers are temperature measurement instruments that operate on the
principle of infrared radiation, i.e. they detect infrared radiation of objects to determine
the temperature.
21
Analytical…
Diagnostic Testing & Consulting Services
Current Trends in the Condition Assessment of Electrical Equipment
Collaborated with an independent analytical laboratory and consulting firm that
specializes in diagnostic testing of oil, gas and other insulating materials used in
transformers, power circuit breakers and load tap-changers. We provides testing,
consulting and other analytical services for electric utilities, industrial high-voltage
power users and service companies.
Diagnostic Standards
Dissolved Gas Analysis (DGA)
Moisture Content
Acid Number
Interfacial Tension (IFT)
Dielectric Breakdown Voltage
Colour
Power Factor (at 1 temperature)
Resistivity
Oxidation Inhibitor
Furan Analysis (with estimated DP)
Particle Count
PCBs in Oil
Corrosive Sulphur
ASTM D-3612
ASTM 1533
ASTM D-974
ASTM D-971
IEC 60156
ASTM D-1500
IEC 60247
IEC 60247
ASTM D-2668
ASTM D-5837
In-house
ECD-507
IEC 62535 or ASTM
Service Package
Transformer Condition
Assessment
Tap Changer Activity
Signature Analysis
Breaker Oil Analysis
DGA, Moisture, IFT, Acid, Colour, Dielectric
Breakdown Voltage, Power Factor @25°C,
Oxidation Inhibitor, Furan Analysis, Particle
Profile
DGA, Moisture, IFT, Acid, Colour,
Dielectric Breakdown Voltage,
Particle Profile
DGA, Moisture, IFT, Acid, Colour,
Dielectric Breakdown Voltage,
Particle Profile
Gas Decomposition/Contamination Products,
Dielectric Breakdown, Moisture
Breaker SF6 Gas
Analysis
Mini-Suite Package
22
DGA, Moisture, IFT, Acid, Dielectric Breakdown
Voltage, Colour and Visual
The Power…
Intelligent Switchgear & Motor Control
Center
We offer both IEC and ANSI/NEMA product for Medium and Low Voltage
Switchgear & Motor Control Center which can be packaged with GE intelligent
protection & control system.
Switchgear
We offer package
Solution…
Motor Control Center
We do retrofitting…
Protection & Control Relay Panel
23
Our Program…
In-Class Training Courses
The skills learned through our courses will help maximize your organization’s
potential by helping meld a skilled workforce with powerful products.
What Will I Learn From This Course?
Motor Protection
Principles & Relaying…
This course addresses the training requirements of
electrical maintenance staff responsible for MM300, 239,
269 Plus, 369, M60 and SR469 Motor Management
Relays. Through a combination of lectures and practical
Lab exercises, the class will learn how to correctly
configure, monitor and troubleshoot these GE Multilin
motor protection relays.
Transmission Line Protection
Principles & Relaying…
This course begins with an overview of basic Transmission
Line terminology, Distance theory, Distance
schemes in addition to Differential Line protection.
Through a combination of lectures and practical Lab
exercises, the class will learn how to correctly configure
the D60 and ALPS Distance relays the L90 Line Current
Differential and L60 Line Phase Comparison.
Generator Protection
Principles & Relaying…
This course begins with an overview of basic Generator
theory and the associated protection requirements.
Through a combination of lectures and practical Lab
exercises, the class will learn how to correctly install and
configure GE Multilin’s Generator Protection Relays.
Distribution Protection
Principles & Relaying…
This course provides an understanding of GE Multilin
Feeder and Transformer protective relay installation,
operation and troubleshooting procedures. The course
covers both the SR750/SR760 Feeder Management
Relay and the SR745 Transformer Management Relay.
Feeder and Transformer protection theory will be
presented, followed by installation, configuration and
Protection element testing using the relay’s built in
simulation software. Practical Lab exercises reinforce
material covered in the class lectures.
Power System Protection
For Industrial Facilities…
This course provides an understanding of the
fundamentals of digital Power System relaying specifically
tailored to Industrial facilities. The class will cover basic
Power System theory, Feeder, Busbar, Transformer
Motor and Generator protection principles. Device
demonstrations will be performed by the instructor
following selected protection sections.
Power System Protection
For Utilities…
This course provides a comprehensive understanding of
the principles of digital Power System relaying,
specifically tailored to Utilities. The class will cover the
major components of a Power System, basic Power
System theory, Feeder, Busbar, Transformer and
Transmission Line protection principles.
PT GUNA ELEKTRO
Power Division
Jl. Arjuna Utara 50 – Jakarta 11510, INDONESIA
T 021 - 565 5020 www.GAE.co.id
F 021 - 565 5030 info@gae.co.id
PWR IV/12