Water Technologies Water Purification Products and

Transcription

Water Technologies
Water Purification
Products and
Services Catalog
This electronic catalog features
programming which allows easy
point-and-click navigation. The
catalog features a “Main Table of
Contents” and actions buttons to
return to “Section Table of
Contents” or to return to the prior
selection “Go Back” buttons.
“Main Table of Contents” and
“Section Table of Contents” allow
the user to scroll over subjects and
advance by clicking on the titles.
Click here to enter the catalog.
At Siemens Water Technologies, our mission is to
provide products and services to meet your water
treatment needs, any time, any place. As one of
the world’s largest water treatment companies,
we offer a wide range of products and services,
combined with experience and technical
knowledge you can trust. We will deliver a
solution that meets even the most stringent
specifications. And, because your satisfaction is
important to us, we stand behind the quality of
our products and services.
Main Table of Contents
S
1
U
M
M
A
R
Table
of
Contents
Y
PRODUCT QUICK REFERENCE GUIDE BY INDUSTRY . . . . . . . . . . . . . . . . . . 2
WAT E R
P U R I F I C AT I O N
PRODUCTS
AND SERVICES
C ATA L O G
WATER TREATMENT TECHNOLOGIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
WASTEWATER CAPABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
SUPPORT SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
WATER QUALITY STANDARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
TRADEMARK STATEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
For a detailed table of contents, refer to each section’s table of contents.
BACK
2
PRODUCT QUICK REFERENCE GUIDE BY INDUSTRY
C O N S U LT T H E S E G U I D E L I N E S T O F I N D S I E M E N S WAT E R T E C H N O L O G I E S P R O D U C T S A N D S Y S T E M S F O R Y O U R I N D U S T RY .
I N D U S T R I E S A R E L I S T E D AT T H E T O P.
ACTIVATED
CARBON FILTERS
CT Series Carbon Towers
HOT Series Systems
l
l
l
l
KF Series
l
l
Mobile
l
l
l
l
l
l
l
l
l
l
l
l
VP Series
CHEMICAL FEED
SYSTEMS
CLARIFIERS
Package Precipitators
DEAERATORS
SLH Deaerating Heaters
DG Series Forced
Draft Decarbonators
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Deionization Recirculating
Systems (DIRS)
l
l
l
l
l
l
l
l
l
VP Series Mixed Beds
Mobile
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Use this table only as a guideline. Products may be used in other industries depending on your specifications.
Siemens
Water Technologies
24-hr Customer Service: 800.466.7873
BACK
l
l
l
l
l
l
l
VP Series Two Beds
l
l
l
l
l
l
CDI-LX™ Systems
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
CDI-LX™ Low Profile Kits
l
l
l
DEIONIZATION
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
3
SERVICE
DEIONIZATION (SDI)
Tanks, Deionizers,
Carbon and Resin
WATER SYSTEMS
INTEGRATED
l
EPV™ Systems
PreVUE® Systems
VP Series
l
40 Series
Pharm40 Series
l
l
l
l
l
l
BevMAX™
Vantage™ M21, 41, 43
Vantage™ M83, M84
l
Vantage™ M280
l
Vantage™ M240
l
l
l
l
l
l
l
l
l
RO SYSTEMS
MicRo Series
l
l
MULTIMEDIA
FILTERS
AVGF Gravity Filters
Mobile
l
l
APEX™ Systems
KF Series
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Siemens
Water Technologies
Technical Support 800.875.7873 ext. 5000
BACK
4
(continued from page 3)
MEDICAL RO (DIALYSIS)
Med-RO® RX Series
SOFTENERS
KF Series
VP Series
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
LABORATORY PRODUCTS
PURELAB® Ultra
PURELAB® Classic
PURELAB® UHQ Water
Purification Systems
PURELAB®
Option Water Purifiers
MEDICA®
l
l
MEDICA® Pro
REVERSE OSMOSIS
SYSTEMS
PURELAB® Prima
CENTRA® (HF)
MODULAB® (HF)
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Siemens
Water Technologies
BACK
l
l
l
5
Water Treatment Technologies
TA B L E O F
CONTENTS
Removal of Common Contaminants Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Activated Carbon Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chemical Addition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Clarification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Continuous Electrodeionization (CEDI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Dealkalization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Degasification/Deaeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Deionization (DI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Distillation for WFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reverse Osmosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
S3™ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Sanitization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Softening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ultraviolet Sterilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
BACK
6
Removal of Common Contaminants
COMMON CONTAMINANTS
Alkalinity
TECHNOLOGY
Carbon
Dioxide
Calcium,
Magnesium
Activated Carbon Filtration
Chlorine,
Chloramines
Inorganics
l
Chemical Addition
l
l
l
l
Continuous Electrodeionization (CEDI)
l
l
l
l
Dealkalization
l
l
l
Clarification
Degasification/Deaeration
l
Deionization
l
Distillation
l
l
l
l
l
l
l
Filtration
Reverse Osmosis (RO)
l
Sanitization
Softening
l
Ultraviolet Sterilization
l
l
Siemens
Water Technologies
BACK
Section Table of Contents
7
COMMON CONTAMINANTS
Iron
(dissolved)
Microbiologicals
Organics
Particles
Pyrogens
Silica
8
l
l
l
Description
of Technology
l
8
l
8
l
l
9
9
10
l
l
l
l
l
l
l
l
10
l
11
12
l
l
l
l
l
l
l
l
l
l
14
14
15
l
l
l
15
Removal of Contaminants is based on the proper use of equipment in the appropriate treatment train. Products are combined to form the best solution for you.
Use this table only as a guide.
Siemens
Water Technologies
BACK
8
WATER TREATMENT TECHNOLOGIES
ACTIVATED CARBON FILTRATION
Activated carbon is carbon that has been processed at high temperature to form
a material with high adsorptive capacity. Usually available in a granular or
powdered form, activated carbon is used to remove chlorine, chloramines and
dissolved organics from water. Carbon filters are frequently used as pretreatment
to membrane and ion exchange-based systems that can be damaged by oxidants
such as chlorine. Two types of activated carbon media:
• High-capacity granular carbon for chlorine removal.
• Organic reduction carbon that uses bituminous coal activated at high
temperature for adsorption of both high and low molecular weight organics.
There are several different types of activated carbon filters available, including
service carbon, backwashable carbon and steam or hot-water-sanitizable carbon.
CHEMICAL ADDITION
Chemicals are often added during or after industrial and municipal water
treatment to enhance the treatment process or further treat the water to meet
specific customer requirements.
The water’s pH is sometimes adjusted to meet the operating specifications
required by certain membranes or ion exchange resins. This is accomplished by
adding caustic soda to raise the pH, or acid to reduce the pH. Dispersants or
antiscalants are sometimes added to prevent scaling from a concentration of
specific ions in the water. Oxidizing agents, sequestering (chelating) agents and
reducing agents can also be added to the water. Oxidizing agents are used to
prevent microbial growth. Sequestering agents help prevent hardness minerals,
such as calcium and magnesium, from depositing on the surface of water
systems, system piping and tanks. Reducing agents, such as sodium
metabisulfite, are added to neutralize oxidizing agents, such as ozone or chlorine,
or remove oxygen.
CLARIFICATION
Clarification is a multi-step process that reduces turbidity and suspended matter. It
also reduces iron and removes color, taste and odor in the water by adding oxidizing
agents, such as chlorine. Clarification consists of three steps: coagulation,
flocculation and sedimentation. During the coagulation stage, chemical coagulants
or pH-adjustment chemicals are used to destabilize the particles. During the
flocculation stage, other chemicals are added to take the previously destabilized
particles and make them stick together. They become agglomerated and form a floc.
During sedimentation, the floc settles by gravity and separates from the water.
Siemens
Water Technologies
BACK
9
CONTINUOUS ELECTRODEIONIZATION (CEDI)
Continuous Electrodeionization
Siemens CDI® System
¶
Feed Water
NaCl
high-purity water without the problems and costs associated with regeneration
chemicals and waste neutralization. It is used to further deionize RO product
¶
º
Continuous Electro Deionization (CEDI) is a continuous process for producing
¶
¹
water and remove carbon dioxide, silica and total organic carbon (TOC). CEDI
systems use ion exchange membranes, ion exchange resins and electricity to
Cl–
produce consistent high-quality water with no regeneration downtime. When
fed with RO product water, CEDI systems achieve better than 99.5% salt
Cl–
Na+
Na+
(+)
Anode
removal and produce up to 18.2 mΩ-cm (0.055 micromho/cm) resistivity
·
¸
OH–
quality water.
¸
(–)
Cathode
¶
How a CEDI system works:
Feedwater entering the system flows inside resin/membrane product and
concentrate compartments. The feed stream flows parallel to the membrane
H+
Product Water
H2O
¼
Waste Stream
(NaCl) Concentrate
Ï
Ë
Ì
surface.
Í
captured anions through the anion membranes.
Resins capture dissolved ions.
Electric potential drives captured cations through the cation membranes and
Cation-permeable membranes transport cations out of the diluting
compartment, but prevent anions from leaving the concentrate
Î
compartment.
Ï
Ð
but prevent cations from leaving the concentrate compartment.
Anion-permeable membranes transport anions out of diluting compartment,
Waste stream removes concentrated ions from the system.
Product water leaves the system.
DEALKALIZATION
Dealkalizers remove alkalinity from feedwater for process, boiler feed (lowpressure boilers) and cooling-tower applications. Chloride cycle dealkalizers use
strong-base anion ion exchange resins that are regenerated with salt to remove
bicarbonate, carbonate, sulphate and nitrate ions from high alkalinity waters by
exchanging them for chloride ions. Split stream dealkalizers “split” the feedwater,
so a portion goes to the hydrogen-form cation resin unit, converting all alkalinity
to carbon dioxide, and the other portion to the sodium-form cation resin unit
(softening). The effluents of both units are then re-joined to produce dealkalized
water.
Siemens
Water Technologies
BACK
10
DEGASIFICATION/DEAERATION
Degasification, or gas stripping, removes undesirable dissolved gases, such as
oxygen, carbon dioxide, ammonia and hydrogen sulfide from water. The gases are
removed by exposing the water to a vapor phase that is missing the gases to be
eliminated. Degasification equipment is classified as ebullition, tray or drip and
spray type units.
One type of drip degasifer is the forced draft degasifer, which removes dissolved
gases from water without changing its ambient temperature. Forced draft
degasifiers are particularly useful for eliminating carbon dioxide formed by the
acid used to adjust raw water alkalinity prior to reverse osmosis treatment. They
also reduce hydrogen sulfide and other dissolved gases in water, and may be
used to oxidize dissolved iron and manganese for subsequent removal by a filter
or clarifier. In this type of operation, they are commonly referred to as aeration
units since they add oxygen to the water for oxidation.
DEIONIZATION
Deionization removes dissolved minerals and salts, as well as some dissolved organics,
from water using the process of ion exchange. During ion exchange, certain ions of a
given charge are replaced (or exchanged) with different ions of the same charge.
These replacement ions are provided by ion exchange resins.
Positively charged ions in the water (cations), such as calcium, magnesium and
sodium are removed by cation exchange resins and replaced with hydrogen ions.
Negatively charged ions (anions), such as chloride, nitrate and sulfate are removed
by anion exchange resins and replaced with hydroxide ions. The hydrogen and
hydroxide ions then unite to form water molecules.
Deionization is conducted in pressure vessels containing the ion exchange resins.
Typical deionization systems consist of separate cation and anion vessels connected
in series (called a separate bed or two bed). These systems produce water up to 1
megohm-cm quality. For higher purity water, a single vessel containing a mixture of
cation and anion resins (called a mixed bed) is employed. Mixed bed deionizers can
produce water up to 18 megohm-cm quality.
Siemens
Water Technologies
BACK
11
Service Deionization
Service deionization (SDI) refers to portable deionization equipment that is designed
for off-site regeneration. A SDI system typically consists of a prefilter, activated
carbon and deionization (DI) tanks, interconnecting hoses, pressure gauges, a
pressure regulator and quality indicators. SDI systems may include separate bed
tanks, mixed bed tanks or a combination of the two, depending on the product
water quality requirements.
When the resins in the tanks reach exhaustion (are no longer capable of effective
ion exchange), the tanks are disconnected and replaced with tanks containing
freshly regenerated resins. The tanks containing the exhausted resin are transported
to a regeneration facility. With SDI, the customer does not make a major capital
investment, and does not handle hazardous regeneration chemicals (acids and
caustics).
Automatic Deionization
Deionizers that are regenerated at the customer site are referred to as automatic
deionizers (Auto DI). During regeneration, the cation resin is treated with acid,
usually hydrochloric acid, and the anion resin is treated with caustic. Automatic
deionizers contain the necessary piping, valves and controls, water quality monitors
and alarms to regenerate the system when required.
DISTILLATION FOR WFI
Distillation is a process whereby feedwater is vaporized at a pressure slightly
above atmospheric, leaving non-volatile impurities behind. The vapor passes
through a separator where heavier particles are raised. The vapor is then
compressed to a higher temperature and pressure. This high temperature vapor
transfers its latent heat to the feedwater as it condenses (leaving noncondensables behind). Degassing of the distillate further increases the purity of
the water. The steam heats the water in the evaporators and the extra heat is
then recovered. Vapor compression distillation is often used in purified water
production to produce hot distillate in systems where the water is stored and
distributed at an elevated temperature (176˚F/80°C). Distillation removes salts,
colloids, particles, bacteria and pyrogens from water down to 10 parts per trillion
(ppt). It is used for producing Water for Injection (WFI) and USP Purified Water.
Siemens
Water Technologies
BACK
12
FILTRATION
Filtration removes solid matter and suspended impurities from a fluid stream by
passing it through a variety of devices, including microporous filters (which
include depth, screen and surface filters), ultrafiltration units, greensand,
activated carbon, diatomaceous earth and multimedia filters. Microporous filters
remove particles according to the filter’s pore size. They are often used before
other water purification equipment, such as deionization and reverse osmosis
systems, and are also used as polishing filters to remove resin and carbon fines,
colloids and microorganisms.
Surface Filtration
Depth Filtration
Microfiltration
Microfiltration, also known as surface, membrane, screen and absolute filtration,
uses microporous filters to remove particles and bacteria in the approximate
range of 0.05 to 10 microns. Microporous filter ratings correspond to the largest
hole or pore in the filter material matrix, which means anything larger will be
“absolutely” removed. Microporous filters are often used as “polishing” filters to
remove contaminants that were not removed by depth filtration.
Multimedia Filtration
Multimedia filters offer a highly efficient means of removing suspended
particulate matter from water. The three layers of media are selected for their
particular size, specific gravity and ability to trap particles of specific size ranges.
As water flows downward through the bed, it encounters layers of media with
decreasing porosity, so successively smaller particles are trapped in each layer,
providing true depth filtration. The filters provide high clarity water either for
direct use or for pretreatment to softeners, deionizers or reverse osmosis
systems.
Siemens
Water Technologies
BACK
13
Nanofiltration
Nanofiltration is a crossflow-membrane separation process that removes selected
salts, most organics and particles in the 300 to 1,000 molecular weight range.
Nanofiltration softens the water without the need for salt regeneration.
Ultrafiltration
Ultrafiltration uses membranes to retain undissolved and dissolved contaminants
that are larger than the nominal molecular weight cutoff rating (NMWC) of the
membrane (typically 5,000 to 500,000 daltons). Ultrafiltration removes particles,
colloidal silica, microorganisms and pyrogens.
Osmosis
REVERSE OSMOSIS
The natural process of osmosis occurs when solutions with different
Osmotic
Pressure
concentrations of salts are separated by a semi-permeable membrane. As
osmotic pressure drives water through the membrane, the water dilutes the more
concentrated solution until equilibrium is achieved. Reverse osmosis (RO) uses
external pressure to reverse the process of osmosis. The water is forced by this
external pressure through a semi-permeable membrane from a more
concentrated solution to a less concentrated one. The RO membrane allows the
water to pass through while retaining (or holding back) a large percentage of the
Membrane
dissolved inorganics, organics, bacteria and pyrogens. The pure water collected
Reverse Osmosis
on the downstream side of the membrane is called the permeate or product
water. RO membranes remove 99% of the feedwater particles, colloids, bacteria,
Pressure
pyrogens and organics greater than 200-300 molecular weight (MW) range, or
larger than the membrane’s pore size of 150 to 200 Ångströms. It removes 9099% of dissolved inorganics. The greater the ionic charge of the inorganic
contaminants, the more likely they will be removed by the RO membrane.
RO Membrane
Siemens
Water Technologies
BACK
14
S3™ SYSTEM
S3™ system is a patent-pending technology developed by Siemens Water
Technologies for high-purity water applications. S3™ technology is used to
produce purified water, non-compendial water or still feed water. The
technology improves upon proven active sanitization methods with a unique,
start/stop mode of operation. Conventional systems require continuous water
recirculation for microbial control, thereby wasting significant energy, water and
consumables. The Siemens’ S3™ process implements periodic short, high
temperature heat cycles of up to 80˚C prior to startup for water production. The
high temperature hold period is typically 5 minutes or less. The shortened heat
cycles result in water conservation and energy reduction when compared with
continuous recirculation methods. The water and energy cost savings often
significantly exceed the system capital cost over the lifetime of the system.
SANITIZATION
Water purification systems and filters can become contaminated by bacteria that
grow inside them. Although most water systems remove the majority of organic
material from the feedwater, gram negative bacteria are able to survive and
multiply in water that contains only small amounts of organic matter. The
bacteria eventually form a layer of biofilm on the water system surfaces, and this
biofilm continuously releases microbes into the water. Bacteria also forms
pyrogens that may elevate organic levels in the product water. For this reason,
proper sanitization of water systems is essential for optimum performance. The
frequency of sanitization and the method used depends on your specific
application.
Sanitization can be done either continuously or periodically with shock
treatments. Continuous sanitization keeps bacteria growth from recurring, while
shock treatments remove bacteria but do not prevent it from recurring.
Continuous sanitization is typically used when a constant level of sanitant is not
harmful to the end-user production process. Shock treatments usually involve
shutting down the production process, introducing sanitant into the system and
then flushing the sanitant from the system before it is placed back on-line.
Often, the water purification system must be cleaned before it can be sanitized.
Cleaning removes the biofilm from equipment surfaces, resulting in more effective
sanitization. Some common chemical sanitants are chlorine (liquid and gas),
chloramines, chlorine dioxide (ClO2), hydrogen peroxide (H2O2), peracetic acid
(CH3COOOH), ozone (O3) and formaldehyde (HCHO). Physical treatments include
heat and ultraviolet (UV) light.
Siemens
Water Technologies
BACK
15
Ca+Mg+
SOFTENING
Softening removes hardness minerals, such as calcium and magnesium from
water. Water softeners are commonly used as pretreatment for boiler feed makeup water systems to prevent calcium and magnesium scale formation in boilers.
They are also used to remove dissolved iron from water.
Ion exchange water softening replaces or exchanges the calcium and
magnesium cations with an equivalent number of sodium cations.
Cation Resin
Hot process softening removes hardness by heating the water to near boiling,
Brine Tank
followed by the introduction of softening chemicals, such as hydrated lime and
soda ash. The minerals then precipitate and settle toward the bottom of the tank,
forming a sludge blanket. As the treated water flows through the sludge blanket,
most of the turbidity is trapped and removed. The effluent is then passed
Na+
through filters that remove the last trace of suspended matter.
Water Softening
Cold lime softening is similar to hot process softening, except the water is not
heated before lime is introduced into the system. This process is carried out in a
specially designed clarifier.
Softeners can be regenerated co-current (downflow) or counter-current
(counterflow). Co-current is when the regenerant chemical and service flows are
in the same direction.
Counter-current is when the service and regeneration chemical flows are in the
opposite direction. Counter-current operations provide lower hardness leakage
when operated properly.
ULTRAVIOLET STERILIZATION
Ultraviolet (UV) sterilization is used as a pretreatment and/or post-treatment step
to kill or inhibit growth of microorganisms, remove ozone, chlorine and trace
organics and reduce total organic carbon (TOC). In UV sterilization, the water is
exposed, at a controlled rate, to ultraviolet light waves. Ultraviolet is the band of
light located in the spectrum between 2000 and 3000 Ångström wavelengths.
The most effective range for destroying bacteria is at 2537 Ångström (254
nanometers). The bacteria absorb the UV radiation energy, which destroys or
inactivates their DNA, thus preventing the bacteria from reproducing. UV systems
may reduce 99% of bacteria in the water.
Siemens
Water Technologies
BACK
BACK
BACK
17
Products
TA B L E O F
CONTENTS
BACK
ACTIVATED CARBON FILTERS
KF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
HOT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
ACTIVATED CARBON MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ANALYTICAL ANALYZERS, TEST KITS, SAMPLING DEVICES
Analyzers
Silica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chlorine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Dissolved Solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Hydrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Microbiological Analysis Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Portable TOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Test Kits
Fouling Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Alkalinity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Carbon Dioxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chlorine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Silica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
RO Water Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Sampling Devices
Bacteria Samplers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ESP Sanitary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BAG FILTERS
Filter Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
CARTRIDGE FILTERS
Cartridge End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Activated Carbon Filters
Granular Activated Carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Pulverized Activated Carbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Particulate Cartridges
DI Gard™ String Wound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ROGARD™ Graded Density Polypropylene . . . . . . . . . . . . . . . . . . . 36
Prepure DP™ Graded Density Polypropylene Depth . . . . . . . . . . . . . 37
NT Series Graded Pore Polypropylene Depth. . . . . . . . . . . . . . . . . . . 38
Postpure PP™ Graded Density Pleated Polypropylene Depth . . . . . 39
NA Series Absolute Rated Polypropylene Depth. . . . . . . . . . . . . . . . . 40
WN Series Pleated Polysulfone Membrane. . . . . . . . . . . . . . . . . . . . . 41
18
Products, continued
WE Series Pleated Polysulfone Membrane . . . . . . . . . . . . . . . . . . . . 42
DI Series Pleated Hydrophilic PVDF Media . . . . . . . . . . . . . . . . . . . . 43
PV Series Pleated Hydrophilic PVDF Media . . . . . . . . . . . . . . . . . . . . 44
VH Series Pleated PES Media Pharmaceutical Grade. . . . . . . . . . . . 45
UF Series Hollow Fiber Polysulfone Media . . . . . . . . . . . . . . . . . . . . . 46
Housings
316 Stainless Steel, Single Tube (Code F) . . . . . . . . . . . . . . . . . . . . . 47
316L Stainless Steel, Single Tube (Code O) . . . . . . . . . . . . . . . . . . . . 48
316L Electropolished Stainless Steel, Multi-tube. . . . . . . . . . . . . . . . . 49
316L Stainless Steel, Multi-tube (High-Purity) . . . . . . . . . . . . . . . . . . . 50
316 Stainless Steel, Multi-tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
304 Stainless Steel, Multi-tube (with V Clamp closure). . . . . . . . . . . . 53
304 Stainless Steel, Multi-tube (with Swing Bolt closure). . . . . . . . . . . . 54
Polypropylene Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
White Polypropylene Plastic (Dialysis). . . . . . . . . . . . . . . . . . . . . . . . . 56
Natural Polypropylene Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Speciality Cartridges
CLERIFY™ Oil Adsorption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Vent Filter Cartridges
Hydrophobic PTFE Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
EA Series Hydrophobic Polypropylene Media . . . . . . . . . . . . . . . . . . . 60
VA Series Hydrophobic PTFE Media . . . . . . . . . . . . . . . . . . . . . . . . . . 61
VP Series Hydrophobic PTFE Media . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CHEMICAL FEED SYSTEMS AND ACCESSORIES
Pre-Kitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Dual Pump Skidded - Grundfos . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Dual Pump Skidded - LMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Polymer Feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Metering Pumps
Chem-Tech® Metering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
LMI® Metering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Pulsatron® Metering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Pulsatron® Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Chem-Ad® LX Diaphram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Encore® 700 Diaphram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Chemtube® PPS Peristaltic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Instrumentation & Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Storage and Bulk Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
CLARIFIERS
Permutit® Package Precipitators . . . . . . . . . . . . . . . . . . . . . . . . . . 80
CLEAN-IN-PLACE SKIDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
CONTINUOUS DEIONIZATION SYSTEMS
CDI-LX™ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
CDI® Replacement Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
CONTROL PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
BACK
DEAERATORS
Permutit® SLH Dearating Heaters. . . . . . . . . . . . . . . . . . . . . . . . . . 85
DEGASIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DEIONIZATION
Recirculating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
VP Series Two Bed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
VP Series Mixed Bed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
VP Series Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DIALYSIS (HEMODIALYSIS)
Bicarbonate Mixing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Med-RO® Reverse Osmosis Medical System – RX Series . . . . . . . . 92
GAUGES
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIGH PURITY WATER SYSTEMS
PureFit® High Purity Water Treatment Systems . . . . . . . . . . . . . . . . 96
ION EXCHANGE RESINS AND FILTER MEDIA
USF™ Ion Exchange Resins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Filter Media and Activated Carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Resin Cross Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
ION EXCHANGE WASTEWATER SYSTEMS . . . . . . . . . . . . . . . . . . . 102
Aquasaver Chemical Feed And Pump Skid. . . . . . . . . . . . . . . . . . . . 103
LABORATORY WATER PURIFICATION SYSTEMS
Ultrapure Water Systems
PURELAB® Ultra Water Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
PURELAB® Classic Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
PURELAB® UHQ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
MODULAB® High Flow Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
General Grade Water Systems
PURELAB® Option-S 7/15/30/60 Water Systems . . . . . . . . . . . . . . 110
PURELAB® Option-R 7/15/30/60 Systems . . . . . . . . . . . . . . . . . . . 112
PURELAB® Option-Q 7/15 Systems . . . . . . . . . . . . . . . . . . . . . . . . 114
Primary Grade Water Systems
PURELAB® Prima 7/15/20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
PURELAB® Prima 30/60/90/120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Centra Packaged Central Water Systems . . . . . . . . . . . . . . . . . . . . . 120
Medica Water Systems for Clinical Analyzers
MEDICA® S/R/D 7/15 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
MEDICA® Pro 30/60/120 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 124
MEDICA® R-200 (High Volume) Systems . . . . . . . . . . . . . . . . . . . . 126
Deionization Systems
Portable Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Disposable Deionization System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Recirculating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Modular Docking Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Storage Reservoirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Accessories
Carboys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Faucets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Products, continued
19
TOTAL-CHECK™ 900 total organic carbon Monitor. . . . . . . . . . . . . 135
Remote Control Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Remote Dispense Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Point-of-Use Capsule Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
IWT® Filtration Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Replacement Cartridges
Siemens, USFilter®, ELGA® Lab Water Systems . . . . . . . . . . . . . . 140
Millipore® Lab Water Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Barnstead® Lab Water Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
LEAK DETECTORS
DI-SDI ALERT® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
WLD Model 300A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
LIGHTS, QUALITY INDICATOR
5-Range Purity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Hy-Lite Water Quality Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
LIQUID LEVEL CONTROLS
Tank Level Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
METERS
Conductivity & Resistivity Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Total Organic Carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
MULTIMEDIA FILTERS
AVGF® Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
KF Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
VP Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
PUMPS, CENTRIFUGAL
Multiple Stage Centrifugal/Victaulic Booster . . . . . . . . . . . . . . . . . . . 159
Multiple Stage Centrifugal/ANSI Flange Booster. . . . . . . . . . . . . . . . 160
Feedwater Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
REVERSE OSMOSIS MEMBRANES
Replacement Membranes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Siemens Proprietary Membranes for Obsolete Systems . . . . . . . . . 163
REVERSE OSMOSIS SYSTEMS
Vantage™ MicRo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Vantage™ M21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Vantage™ M41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Vantage™ M43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Vantage™ M83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Vantage™ M84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Pharm 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
40 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Vantage M240 Two Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Vantage M280 Two Pass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
BevMAX™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
SERVICE DEIONIZATION (SDI)
SDI Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
SOFTENERS
KF Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
KF Series Twin Alternating Softeners. . . . . . . . . . . . . . . . . . . . . . . . . 186
KF Series Duplex Alternating Softeners. . . . . . . . . . . . . . . . . . . . . . . 187
BACK
VP Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
STORAGE TANKS
Polyethylene, Conical Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Fiberglass, Dish-Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Polyethylene, Flat Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
TerraPure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
SYSTEM, EPV™ VALIDATABLE SKIDDED
EPV™ Validatable Skidded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
SYSTEM, PreVUE® AND APEX™ VALIDATED SKIDDED
PreVUE® Validated Skidded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
APEX™ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
TEMPORARY MOBILE WATER TREATMENT
Mobile Demineralization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Mobile Clarification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Mobile Reverse Osmosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
PreFlex® Skid-Mounted Pretreatment Systems . . . . . . . . . . . . . . . . 202
FlexTrex® Skid-Mounted Deionization Systems . . . . . . . . . . . . . . . . 203
FlexRO® Skid-Mounted RO Systems . . . . . . . . . . . . . . . . . . . . . . . . 204
ULTRAVIOLET STERILIZERS
ZCS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
ZHX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
ZCT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Replacement UV Monitoring for Aquafine® Series UV . . . . . . . . . . . 208
Ultraviolet Light Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
VALVES/REGULATORS
Blend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Pressure Relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
WASTEWATER CAPABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
SUPPORT SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
WATER QUALITY STANDARDS AND CONVERSIONS . . . . . . . . . . . 231
GLOSSARY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
TRADEMARK STATEMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
20
KF Series Carbon Filters
Flow Rates from 1 to 81 gpm
KF Series Carbon Filters are ideal for commercial and light industrial filtration
applications where the advantages of a lightweight, corrosive-resistant FRP
pressure vessel and cost-effective top mounted valve are desirable.
• For pharmaceutical, cosmetic, microelectronic, boiler feed, process water,
laboratory applications and more
• Tanks are blow-molded plastic, wrapped with high-strength fiberglass and
contain epoxy resin for worry-free service
• Dependable motorized control valve is included with each filter
• Electromechanical timer allows automatic backwash
• Pretreatment lock-out switch assembly is included to deactivate downstream
equipment during backwash
Requires field
assembly
SYSTEM SPECIFICATIONS
Tank Size
(D x H in)
Pipe
Size
(in)
Chlorine
10x40
1.0
12x52
1.0, 1.5
14x65
1.0, 1.5
16x65
1.0, 1.5
18x65
1.0, 1.5
21x62
1.5, 2.0
24x72
2.0
30x72
2.0
36x72
2.0
42x72
3.0
Electrical Requirements
Organics
Commercial* RO-Feed** Commercial* RO-Feed**
Service
Service
Service
Service
Flow
Flow
Flow
Flow
Backwash Media
Flow
Vol
(ft 3)
Overall
Shipping
Dimensions Weight
LxDxH (in) lb (kg)
6 gpm
4 gpm
2 gpm
2 gpm
8 gpm
2.0
12x12x63
140 (64)
12 gpm
8 gpm
4 gpm
4 gpm
14 gpm
4.0
16x16x76
310 (141)
3 gpm
9 gpm
15 gpm
18 gpm
24 gpm
45 gpm
60 gpm
2 gpm
6 gpm
10 gpm
12 gpm
16 gpm
30 gpm
40 gpm
1 gpm
3 gpm
5 gpm
6 gpm
8 gpm
15 gpm
20 gpm
1 gpm
3 gpm
5 gpm
5 gpm
10 gpm
18 gpm
1.0
3.0
5.0
10x10x50
14x14x76
18x18x76
100 (46)
210 (96)
400 (182)
6 gpm
24 gpm
6.0
21x21x74
530 (241)
15 gpm
50 gpm
15.0
30x30x96
1530 (694)
8 gpm
20 gpm
81 gpm
54 gpm
21 gpm
27 gpm
...........
110 V/1 ph/60 Hz – 10 watts
30 gpm
70 gpm
90 gpm
8.0
20.0
27.0
24x24x90
36x36x97
42x42x110
1190 (540)
1943 (882)
2000 (907)
*Flow is based on 3.0 gpm/ft3 for chlorine removal. Flow is based on 1 gpm/ft3 for organic reduction.
**Dechlorination flow is based on 2 gpm/ft3, and assumes inlet Cl2 < 3 ppm; outlet Cl2 ≤ 0.1 ppm; inlet turbidity < 5 NTU. Organic reduction flow is
based on 1 gpm/ft3, and assumes inlet TOC ≤ 5 ppm as O2 consumed; inlet turbidity < 5 NTU.
ORDERING INFORMATION
Catalog Number:
System Name . . . . . . . . . . . . . . .
KFZCS XXX
KFZCS
F
X
Z
F
X
010, 012, 014,
016, 018, 021,
Pressure Vessel Diameter (in inches). . . . . . . 024, 030, 036, 042
Pressure Vessel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = non-code, fiberglass
Control Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X = NEMA 3R equivalent
A = 1"
Level of Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z = Stand alone
B = 1.5"
Backwash/Regeneration Initiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = Timeclock, NEMA 3R equivalent C = 2"
Inlet/Outlet Pipe Size † . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E = 3"
Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
X = No
Option
To determine your catalog order number, replace the X with one of the numbered options below it.
These filters are also available as duplex units. Please contact our Technical Support team for more information.
†All sizes are not available with every tank size.
In accordance with Siemens policy for continual product development and improvements, we reserve the right to change the product information within this literature at any time, without
notice.
Siemens
Water Technologies
BACK
21
VP Series Carbon Filters
VP Series Carbon Filters are a low cost, reliable and efficient way to purify water.
These rugged, pre-engineered, pre-assembled units minimize installation and startup costs and are ideal for boiler feed, process water or rinse water applications.
• VPEC denotes Non-ASME code vessels offered with express delivery
• VPAC denotes ASME code vessel with stamp available
• Simple design maximizes reliability and efficiency
• 100 psig vessel rating offers added strength and integrity
• Structural steel (seismic zone 4) legs provide rigid support of vessel for safety
• Skid mounting with (seismic zone 4) structural steel beams for duplex systems
• Backwash and regeneration controls are highly reliable
• Optional metallic piping ensures long life and durability
• Standard epoxy internal and external coating extend vessel life
Model Number . . . . . . . . . . . . . . . . . . . . . . .
Flow Rates
Good . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Better . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Best . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backwash Flow Rate . . . . . . . . . . . . . . . . . .
Rinse Flow Rate . . . . . . . . . . . . . . . . . . . . . .
Media (cubic feet) . . . . . . . . . . . . . . . . . . . . .
System Dimensions*
Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . .
Column Size (D x H)
inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H x W x D Simplex (Duplex) – inch . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
lb. – Simplex (Duplex) . . . . . . . . . . . . . . . .
kg – Simplex (Duplex) . . . . . . . . . . . . . . . .
Operating Weight
Electrical Requirements . . . . . . . . . . . . . . .
Model Number . . . . . . . . . . . . . . . . . . . . . . .
Flow Rates
Good . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Better . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Best . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backwash Flow Rate . . . . . . . . . . . . . . . . . .
Rinse Flow Rate . . . . . . . . . . . . . . . . . . . . . .
Media (cubic feet) . . . . . . . . . . . . . . . . . . . . .
System Dimensions*
Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . .
Column Size (D x H)
inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H x W x D Simplex (Duplex) – inch . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
Operating Weight
• Schedule 80 PVC piping enhances corrosion-resistance
VPEC/VPAC-024
VPEC/VPAC-630
VPEC/VPAC-636
VPEC/VPAC-742
32
16
8
31
19
8
48
24
12
49
29
12
72
36
18
71
42
18
96
48
24
96
58
24
24 x 48
61x122
76x43x41 (80x97x41)
193x110x104(204x247x104)
30 x 60
77x153
90x43x48 (94x97x48)
229x110x122 (239x246x122)
36 x 60
92x153
96x45x54 (100x97x54)
244x114x137 (254x246x137)
42 x 72
107x183
112x47x58 (116x133x58)
285x119x147 (295x338x147)
1-1/2”
1,000 (2,000)
454 (908)
1-1/2”
1,380 (2,760)
626 (1,252)
2”
2,190 (4,380)
994 (1,987)
2”
3,160 (6,320)
1,433 (2,866)
1,800 (3,600)
2,580 (5,160)
4,340 (8,680)
6,090 (12,180)
817 (1,633)
1,171 (2,341)
1,969 (3,938)
2,762 (5,524)
110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VPEC/VPAC-648
VPEC/VPAC-754
VPEC/VPAC-760
VPEC/VPAC-772
128
64
32
126
75
32
160
80
40
159
95
40
200
100
50
196
118
50
300**
150
75
283
170
75
48 x 60
122x153
106x54x65 (110x132x66)
269x137x165 (279x335x168)
54 x 72
139x183
121x61x75 (127x158x75)
307x155x191 (323x401x191)
60 x 72
153x183
125x64x81 (131x158x81)
318x163x206 (333x401x206)
72 x 72
183x183
129x72x93 (136x158x93)
328x183x236 (345x401x236)
2-1/2”
4,040 (8,080)
1,833 (3,666)
3”
5,550 (11,100)
2,517 (5,034)
3”
7,065 (14,130)
3,205 (6,410)
3”
10,210 (20,420)
4,631 (9,262)
7,940 (15,880)
10,570 (21,140)
13,275 (26,550)
19,200 (38,400)
3,602 (7,204)
4,794 (9,588)
6,021 (12,042)
8,709 (17,418)
110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VP Series Carbon Filters have extensive option packages. For ordering instructions, or additional product information, please contact technical support at 800.875.7873 extension 5000.
* Approximate
** Rating for metallic piping only. Plastic piping requires aeration due to line velocities.
Siemens
In accordance with Siemens policy for continual product development and improvements, we reserve the right
Water Technologies
to change the product information within this literature at any time, without notice.
BACK
22
CT Series Carbon Towers
A complete line of standard carbon tower units designed for the beverage industry or any
application that can utilize hot water or steam sanitization for dependable operation. The CT
Series designation refers to beverage grade carbon towers with stainless steel pressure vessels,
face piping and internal distributors. The units are available with programmable logic controllers
(PLC) or manual operation. Carbon media and other optional equipment can be easily selected
and ordered to address your specific requirements.
• For pretreatment applications requiring removal of chlorine, chloramine, and many types of
organic contaminants
• Vessels are designed for hot water sanitization and steam vapor stripping/sanitization, bottom
and/or top entry, for removing VOC’s such as trihalomethanes
• Standard system is based on 1 gpm/ft3 and a backwash rate near 2 gpm/ft3 (dependent upon
carbon density and particle size)
• Uses advanced well screen internals to guarantee uniform distribution during draw-off and backwashing
• Units available with PLC or manual operation
• Vessels, piping and internals available in 316L or 304 stainless steel combinations
• Full Drainability using scavenger screen ensures continuous complete removal of condensate during steaming
• Higher flow systems, manway types, temperature and control probes, special carbon attributes, sampling ports, and finishes can
be customized with minimal impact on delivery and cost
Model Number
CT050
CT100
CT150
CT200
CT250
CT300
CT350
Service Flow Rate . . . . . . . . . . . . . . . . . .
57 gpm
118 gpm
170 gpm
231 gpm
265 gpm
302 gpm
382 gpm
Backwash Flow Rate*. . . . . . . . . . . . . . . .
<96 gpm
<196 gpm
<283 gpm
<385 gpm
<442 gpm
<503
<636 gpm
Media Volume of Carbon (cu. ft.) . . . . . . .
57
118
170
231
265
302
382
Shell Diameter . . . . . . . . . . . . . . . . . . . . .
42"
60"
72"
84"
90"
96"
108"
Carbon Bed Depth . . . . . . . . . . . . . . . . . .
>5’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freeboard Above Carbon . . . . . . . . . . . . .
>50% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Pressure . . . . . . . . . . . . . . . . . . . .
65 or 100 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automated (PLC) or Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Underdrain System. . . . . . . . . . . . . . . . . .
Well Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manway . . . . . . . . . . . . . . . . . . . . . . . . . .
Top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Requirements . . . . . . . . . . .
120 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*At 10 gpm/ft2 and depends on carbon density and particle size.
Catalog Number:
CT
050
System Name . . . . . . . . . . . . . CT 050, 100, 150,
Model Number . . . . . . . . . . .
200, 250, 300, 350
A
6
6
A
A = 100 psi
Design Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B = 65 psi
6 = 316L Vessel
Vessel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 = 304 Vessel
Piping Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 = 304 Piping
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 = 316L Piping
A = Automatic Operation
M = Manual Operation
In accordance with Siemens policy for continual product development and improvements, we reserve the right to change the product information within this literature at any time, without notice.
Siemens
Water Technologies
BACK
23
Heat Optimized Technology
“HOT” Series Systems for Carbon Towers
For use with new or existing carbon towers
Bacteria in production water and biofouling of water treatment systems can create operational
challenges for Beverage and BioPharm manufacturers. To meet these challenges, the “HOT”
Series systems were introduced. HOT technology is a Siemens patented process that provides
thorough sanitization of new or existing carbon towers, reduces backwash water by up to 75%,
and adds process control. HOT Series systems use hot water to eliminate the potential for bed
contamination that can exist from utilizing plant steam. A HOT Series system can be provided
independently, with or without an optional chilling exchanger, or as a complete system
including carbon towers and ancillary equipment.
• Field proven to provide more effective microbial kill than conventional steaming processes
• More thorough kill lessens the bacteria counts, to significantly increase periods between sanitizations
• Available with fully automated or manual operation
• All stainless steel skid and process piping
• Fully wired and hydrostatically tested prior to shipment
• Less biofouling and cleaner carbon significantly increase carbon performance and substantially reduce costs
• The heating system is capable of sanitizing the loop distribution piping and polishing equipment for improved operations
• Bacteria control is improved due to uniform heating of the carbon bed in the expanded state with reduced potential for cold
spots during sanitization.
Time
Comparison Of Heat Sanitization Techniques Within A Single 84” Diameter Carbon Tower
Backwash to Drain (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backwash Recycle & Heat (Minutes) . . . . . . . . . . . . . . . . . . . . . . . .
Heat-Up (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hold Time (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cool Down (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rinse to Drain (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total Time (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Hours) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operator Attention (Hours) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total Water Used (Gallons) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conventional Steaming
HOT Series Systems
20
—
240
30 – 60
480
5
805
13.4
3
13,800
5
60
—
—
480
5
550
9.2
0.5
4,500
HOT Series with
Optional Chilling Exchanger
5
60
—
15 – 30
60
5
160
2.2
0.5
4,500
Beverage manufacturers who have extremely low bacteria specifications are utilizing loop configuration water distribution systems to keep the water moving more effectively than “dead
ended” systems. The heating system included with the HOT Series Systems can serve double duty by sanitizing the loop distribution piping and polishing equipment as well.
Catalog No.:
67/HOT
250
T
Heat Optimized Technology System . . . . . . 67/HOT
Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 - Backwash: 96–283 GPM
(For Siemens CT050, CT100, and CT150)
250 - Backwash: 284– 442 GPM
(For Siemens CT200 and CT250)
T - SS Tubing with Threads,
350 - Backwash: 443–636 GPM
Flanges and Tri-clamps
(For Siemens CT300 and CT350)
S - SS Tubing with Tri-clamps
Piping Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
only, 180 grit ID polish
2 - 208/240 VAC, 3 Phase, 60 Hz
Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 480 VAC, 3 phase, 60 Hz
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
A - Automatic
Cooling Exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C
C - Cooling
Exchanger
Included
N - No Cooling
Exchanger
Valve Kits: For integration of the HOT Series System with existing 5 valve carbon towers, 2 additional valves are necessary for proper interconnection. The part numbers below are for a kit of 2
valves. Order 1 kit for each existing carbon tower that the HOT System will be used with.
It is critical to consider the HOT Series System must work in conjunction with either a new or an existing carbon tower that is rated for a minimum of 65 PSI and
equipped with ASME pressure relief valves.
The HOT Series is intended for applications with both new or existing carbon towers. The backwash flow rates and pump sizing of the HOT Series system are
based on the CT Series carbon towers. Some older, existing carbon towers utilize a 2’ bed depth or a wider, stockier vessel. This would change the required
flow rates of the backwash and sanitization steps of the HOT process. HOT Series systems can be incorporated with
Siemens
either style of carbon tower.
A Siemens Applications Engineer will ensure the HOT Series system is sized correctly for retrofit vessels.
Water Technologies
BACK
24
ACTIVATED CARBON MEDIA
Activated Carbon Media
Siemens Water Technologies is a national provider of complete turnkey carbon services.
We inventory a full line of premium Westates® activated carbons made from high
quality bituminous coal, coconut shell and anthracite coal raw materials. Applications
for activated carbon include improving the taste and quality of drinking water, treating
industrial wastewater, purifying materials used in production processes, controlling air
emissions, and filtering contaminants out of groundwater in environmental cleanup
sites. Our laboratory analyzes and certifies the quality of all the activated carbon
supplied through an extensive QA/QC program. Our strategically located service centers
allow for efficient and prompt delivery and service.
Applications
• Chlorine removal
• Chloramine removal
• VOC control from air strippers, soil vapor extraction and air sparge systems
• Remediation
• Solvent Recovery
• Odor Control
• Trace Organics
• Disinfection By-products
Westates® Activated Carbon Products
• Vapor Phase Carbons
• Liquid Phase Carbons
• Bulk Carbons
• Coconut-Shell Carbons
• Bituminous Coal Carbons
• Impregnated Carbons
• Anthracite Carbons
• Midas® Odor Control Media
• VoCarb® Carbon
• AquaCarb® Carbon
Midas® Odor Control Media (OCM)
Midas® OCM is a breakthrough in odor control. Unlike any other odor control media,
Midas OCM is manufactured in a special process combining selected active ingredients
and premium quality bituminous coal to produce an extraordinarily high H2S
breakthrough capacity. This odor control media is not impregnated and therefore does
not suffer the serious drawbacks associated with alkali-impregnated carbons. The lack of
impregnant means all of Midas OCM’s pore volume and surface area are available for
storing the sulfur produced during the catalytic oxidation of H2S and for the adsorption of
any VOCs that may be present in the gas stream. And, since Midas OCM is not
impregnated, it is safer to load, start-up and remove from an adsorber system.
For a complete list of our Activated Carbon Turnkey Services, see page 216.
Siemens
Water Technologies
BACK
ANALYTICAL TEST KITS, ANALYZERS, SAMPLING DEVICES
Analyzers, Test Kits, Sampling Devices
Catalog No.
Description
ZWRQ03275
Fouling Index Test Kit
METCL4678002
Chlorine Analyzer
METSI6000001
HDREGTKIT
METCDML532T1
METHY0828720
MHWG 037 00
ZTOCA1S20P
METHD4270002
Silica Analyzer
Hardness Monitor Replacement
Reagent Kit
Dissolved Solids Meter
Dual Scale Universal Hydrometer
Microbiological Analysis Monitor,
white grid 50/pk
Anatel® A1000 S20P Portable
TOC Meter
Hach® Hardness Monitor
FOULING INDEX TEST KIT (SILT DENSITY INDEX)
Used to measure the amount of colloidal particulate matter in a water stream,
includes a filter disc holder, pressure regulator, pressure gauge, tweezers, filter discs,
valves and fittings. Also required, but not included, is a timing device (stop watch, or
wrist watch with a second hand). Measurement is made by passing the stream of
water at a constant pressure through the filtration disc for a predetermined amount
of time.
SILICA ANALYZER
Fully automated, continuous silica monitor measures silica in a single stream of
water in the 0-100 ppb range. The monitor uses a silica molybate colorimetric
procedure to measure resistive silica. Sulfuric acid and ammonium molybdate are
added to the water sample, forming molybdosilica acid. Oxalic acid is used to
reduce the molybdosilica acid to a molybdenum blue complex, which is
measured photometrically at 810 nm. The silica analyzer requires 115V AC for
operation, and comes with a one month supply of all necessary reagents,
calibration solutions, and replacement tubing harness.
CHLORINE ANALYZER
Designed to provide an alarm signal when the total available chlorine in a water
sample exceeds a preset limit. Has a 0.5 mg/L range, 0.01 mg/L resolution, and
automatic color/turbidity compensation. Uses the DPD colorimetric method to
measure free chlorine.
HARDNESS MONITOR
Designed to provided an alarm signal when the total hardness in the water
sample exceeds a preset limit. The alarm trip point for this detector is 2 mg/L. The
unit performs an analysis every two minutes. The hardness monitor uses a
buffered colorimetric indicator to detect total hardness. A color is developed
following the addition of an indicator reagent and a buffer in precise proportions.
Color development is monitored by a colorimetric photometer. Three consecutive
“hard” indications are required before an alarm circuit is activated; two before the
alarm is cancelled. All reagents are included in the initial kit.
DISSOLVED SOLIDS METER
Hand-held analog meter measures three ranges of dissolved solids (0-50, 0-500
and 0-5000 ppm) and features automatic temperature compensation, and a
built-in cell cup that contains self-maintaining electrodes that never need
replatinizing.
DUAL SCALE UNIVERSAL HYDROMETER
Measures the density of liquids both lighter and heavier than water. This plain
form hydrometer is 15" (38cm) long, with a specific gravity range of 0.700 to
2.00 (Baume 10 to 70° light, 0 to 70° heavy).
MICROBIOLOGICAL ANALYSIS MONITORS, 37mm
Two-piece disposable monitor for microbiological analysis of samples by either
vacuum filtration or for use with an ESP sampling valve. The 0.45 mm pore size
filter is grid marked to aid in counting colonies grown on the surface.
ANATEL® A1000 S20P PORTABLE TOC METER
Rugged unit combines a sensor with controller, printer and carrying handle for
convenient portability within your water system. This unit provides TOC analysis
to 0.05 ppb without the inconvenience of acids, oxidants, and gases.
Siemens
Water Technologies
BACK
25
26
Analyzers, Test Kits, Sampling Devices
ALKALINITY
Use a drop count titration method for the measurement of carbonates, bicarbonates,
hydroxides, and other dissolved salts. In this kit an indicator is added to the sample, and
then a dropper is used to add the titrant until the color changes. Kit includes enough
reagents to perform approximately 100 phenolphthalein and 100 total (as CaCO3) tests.
CARBON DIOXIDE
Use a drop count titration method for the measurement of carbon dioxide. An indicator
is added to the sample, and then a dropper is used to add the titrant until the color
changes. Kit includes enough reagents to perform approximately 200 tests.
CHLORINE - LOW RANGE
Use a color disk that features a continuous-gradient color wheel for fast, accurate
comparisons for chlorine measurement. The color wheel is simply rotated to obtain a
color match with the treated sample. Each kit includes enough reagents to perform
approximately 100 tests.
CHLORINE - MID AND HIGH RANGE
Use a drop count titration method to measure chlorine. An indicator is added to the
sample, and then a dropper is used to add the titrant until the color changes. Kit
measures total chlorine in the range of 10-200 mg/L. Kit includes enough reagents
to perform approximately 100 tests.
HARDNESS
Use a drop count titration method for the measurement of calcium and magnesium. An
indicator is added to the sample, and then a dropper is used to add the titrant until the
color changes. Kit measures total hardness at CaCO3 in the range of 1-20 mg/L. Kit
includes enough reagents to perform approximately 100 tests.
IRON
Use a color disk that features a continuous-gradient color wheel for fast, accurate
comparisons for iron measurement. The color wheel is simply rotated to obtain a color
match with the treated sample. Kit measures Fe in the range of 0-5 mg/L. Each kit
includes enough reagents to perform approximately 100 tests.
pH
Most natural waters range from pH 4 to pH 9. Uses a color disk that features a
continuous-gradient color wheel for fast, accurate comparisons. The color wheel is
simply rotated to obtain a color match with the treated sample. Kit measures pH in the
range of 4-10. Each kit includes enough reagents to perform approximately 300 tests.
SILICA-LOW RANGE
Uses a color disk that features a continuous-gradient color wheel for fast, accurate
comparisons. The color wheel is simply rotated to obtain a color match with the treated
sample. Kit measures SiO2 in the range of 0-1 mg/L. Each kit includes enough reagents
to perform approximately 100 tests.
Catalog No.
Description
KIT2444301
Alkalinity Test Kit
REAG2437401 Replacement reagent set (approx. 100 tests)
KIT143601
Carbon Dioxide Test Kit
KIT1454201
KIT1454202
KIT1454200
Chlorine-Low Range,
as free Cl2 down to 0.2 mg/L
Chlorine-Low Range,
as total Cl2 down to 0.2 mg/L
Chlorine-Low Range,
as free and total Cl2 down to 0.02 ppm mg/L
REAG1406499 Replacement reagent set total chlorine
REAG1407099 Replacement reagent set free chlorine
REAG2440400 Replacement reagent set free & total chlorine
KIT2444400
Chlorine-Mid and High Range Test Kit
KIT145201
Hardness Test Kit
KIT146400
REAG92799
Iron Test Kit
Replacement reagent set (approx. 100 tests)
KIT147011
pH Test Kit
KIT2255000
Silica-Low Range Test Kit
KIT1455400
Silica-High Range Test Kit
HAWP04700
TESTKITUP
Replacement filters for Fouling Index
Test Kit
RO Water Quality Test Kit
SILICA-HIGH RANGE
Uses a color disk that features a continuous-gradient color wheel for fast, accurate
comparisons. The color wheel is simply rotated to obtain a color match with the treated
sample. Kit measures SiO2 in the range of 0-40 mg/L. Each kit includes enough
reagents to perform approximately 100 tests.
RO WATER QUALITY TEST KIT
Convenient, self-contained test kit provides all the materials and instructions
required for on-site monitoring of reverse osmosis (RO) systems, for both feed and
product water. Because tap water is checked, pretreatment components for
optimum RO performance can be determined. Each kit contains all materials and
instructions to perform the following tests: Silt Density Index, Total Hardness,
Alkalinity, pH, Temperature, Langelier Saturation Index, Free and Total Chlorine,
Soluble and Insoluble Iron, Carbon Dioxide and Silica.
Siemens
Water Technologies
BACK
Bacteria Samplers
Provides simple, fast microbiological analysis of surface, natural source, make-up,
process and laboratory-grade water (or high-purity). Extremely versatile for
sampling fluids and different types of surfaces and crevices. Can be used in a
variety of industries including beverage bottling/canning, cosmetic and
pharmaceutical manufacturing, food processing. Each sampler absorbs 1 mL of
sample. Consists of a plastic tab supporting a 0.45 µm filter bonded to an
adsorbent pad containing dehydrated nutrient medium, and all contained in a
transparent plastic case.
• Filter surface is grid-marked to permit counting colonies
• Presterilized and ready for use, the sample does not require special preparation
• Entire assembly is sterilized and packaged in a sealed plastic envelope. Samples
may be used in conjunction with the swabbing unit for surface-sanitization.
This is a cotton-tipped swab stick in sterile buffer contained in a vial similar to
the sampler vial.
Catalog No.
MC0010025. . . . .
MY0010025. . . . .
MT0010025. . . . .
MHPC10025 . . . .
B01040WA . . . . .
Description
Coli-count Sampler (blue) 25/pk
Yeast and Mold Sampler (white) 25/pk
Total Count Sampler (white) 25/pk
HPC Total Count Sampler for Dialysis (red) 25/pk
Whirl-Pak® Thio-Bag® 100mL (100/pk)
Siemens
Water Technologies
BACK
27
28
ESP Sanitary Sampling Valves
The ESP sanitary sampling valve is designed for the sterile sampling of high-purity
water. It allows for mid-stream sample collection in water lines, resulting in truly
representative sampling. The unique design eliminates bacterial and particle
build-up that could interfere with bacteriological test results.
• Comes complete with two 18-gauge blunt-end syringe needles (for sanitization),
a spare set of seals, and two sealing caps (covers the Luer-slip outlet to maintain
sanitary conditions)
• Available in 1/4" (for use with 1-1/2" or larger diameter lines) and 1/8" (for use
with 3/4" or larger lines) NPT or weldable configurations
• Valves pre-welded into 1" – 3" diameter spool pieces or a 1-1/2" TC end cap is
also available
• Easily installed in liquid distribution lines; can be kept in a sanitary condition
between uses
• Bacteriological analysis monitor can be directly attached to the valves Luer-slip
outlet, or flow can be directed into any type of container
• Sampling valve body and stems constructed of 316 stainless steel
• Operational up to 100 psig (7 bar) at 25°C
Catalog Number
ZWSSP0400
Type
1/4" NPTM
Spare Parts
Whirl-Pak® Bags (100 mL; 100/pk)
Plastic Syringes, 20 mL (12/pk).
Plastic Syringes, 50 mL (5/pk). .
Spare Parts Kit (3 Viton® o-rings,
5 syringe needles,
10 plastic caps, 3 plug seals)
Plastic Cap Only . . . . . . . . . . . .
Spare Parts Kit
(2 o-rings, 2 plug seals) . .
ZWSSP0800 ZWSSPW400
1/8" NPTM
Catalog No.
1/4" weldable
ZWSSPW800
1/8" weldable
ZWSSPW840
1" pre-welded
ZWSSPW441
1 1/ 2" pre-welded
ZWSSPW442
TC 2" pre-welded
ZWSSPW442 9594
TC 3" pre-welded TC end cap pre-welded
B01040WA
XX11 020 12
XX11 050 05
YY20 04K 00
P91018
P91968
Siemens
Water Technologies
BACK
29
BAG FILTERS
Bag Filters
BAG FILTERS (LOW FLOW)
• Polypropylene thermally welded bag
Size
Size
LOW FLOW 20”
LOW FLOW 10”
10
10
10
10
10
10
10
Micron Catalog Number
1
5
10
25
50
100
200
20
20
20
20
20
20
20
D1004445
D1004447
D1004449
D1004451
D1004453
D1004455
D1004457
1
5
10
25
50
100
200
D1004446
D1004448
D1004450
D1004452
D1004454
D1004456
D1004458
BAG FILTERS
• Available in #1 (7x16.5") and #2 (7x32") sizes
• Stainless steel locking ring
• Choice of polypropylene or polyester felt materials
Polypropylene Felt
Size
Micron
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
1
5
10
25
50
100
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
1
5
10
25
50
100
Catalog Number
FBWPO1P2S
FBWPO5P2S
FBWPO10P2S
FBWPO25P2S
FBWPO50P2S
FBWPO100P2S
FBWPO1P1S
FBWPO5P1S
FBWPO10P1S
FBWPO25P1S
FBWPO50P1S
FBWPO100P1S
Polyester Felt
Size
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
1
5
10
25
50
100
1
5
10
25
50
100
FBWPE1P2S
FBWPE5P2S
FBWPE10P2S
FBWPE25P2S
FBWPE50P2S
FBWPE100P2S
FBWPE1P1S
FBWPE5P1S
FBWPE10P1S
FBWPE25P1S
FBWPE50P1S
FBWPE100P1S
BAG FILTERS (SEWN-CASE QUANTITIES ONLY)
• Polypropylene or polyester
Size
Size
Micron
5
10
25
50
100
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
5
10
25
50
100
Polypropylene
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
P1 . . . . .
5
10
25
50
100
FBSP05P2P
FBSP010P2P
FBSP025P2P
FBSP050P2P
FBSP0100P2P
FBSP05P1P
FBSP010P1P
FBSP025P1P
FBSP050P1P
FBSP0100P1P
Polyester
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
P2 . . . . .
5
10
25
50
100
Catalog Number
FBSPE5P2S
FBSPE10P2S
FBSPE25P2S
FBSPE50P2S
FBSPE100P2S
FBSPE5P1S
FBSPE10P1S
FBSPE25P1S
FBSPE50P1S
FBSPE100P1S
Siemens
Water Technologies
BACK
30
BAG FILTERS
Bag Filter Housings
STAINLESS STEEL NON-CODE BAG FILTER HOUSINGS*
• 316SS construction
• BUNA-N O-ring
• 2" NPTF threaded or 2” RF 150lb ANSI flanged
• Available in 65 gpm (size P1) or 125 gpm (size P2) flow rates
• Rated at 150 psi @ 200°F
P1 . . . . . . . . .
P2 . . . . . . . . .
P1 (Flng). . . .
P2 (Flng). . . .
Catalog Number:
FBHFBF111S
FBHFBF112S
FBHFBF111SF
FBHFBF112SF
STAINLESS STEEL ASME CODE BAG FILTER HOUSINGS*
• 316SS construction
• BUNA-A O-ring
• RF 150lb ANSI flanged connections
• Single bag housings available with swing bolt closure
• Multi bag housings have swing bolt spring-assist closure, see flow rates below
• Rated at 150 PSI @ 200˚F
1 bag . . . . . . . . . .
1 bag . . . . . . . . . .
3 bag . . . . . . . . . .
4 bag . . . . . . . . . .
6 bag . . . . . . . . . .
8 bag . . . . . . . . . .
Size
Flow Rate
Connection
Part Number
P2
125
2”
FBHTBF112S
400
4”
FBHF3AV0400001
P1
P2
P2
P2
P2
65
230
2”
3”
675
6”
900
8”
FBHTBF111S
FBHF3AV0300001
FBHF3AV0600001
FBHF3AV0800001
Siemens
Water Technologies
BACK
31
BAG FILTERS
Bag Filter Housings
PLASTIC BAG FILTER HOUSINGS (STANDARD FLOW)
• Heavy duty reinforced polypropylene construction
• Viton® Seals
• 2" NPTF connections
• Available in 50 gpm (size P1) or 100 gpm (size P2) flow rates
• Rated at 150 psi @ 80°F
• Duplex valved A/B bank divert operation
P1 . . . . . . . . .
P2 . . . . . . . . .
P1 (duplex) . .
P2 (duplex) . .
Catalog Number:
FBHFLT4201
FBHFLT4202
FBHFLT1DUP
FBHFLT2DUP
PLASTIC BAG FILTER HOUSINGS
• Polypropylene construction
• Choice of 10” or 20” housings
• Comes with gauge, wrench and 3/8” drain valve
• Available in 1” and 1 1/2” NPT sizes
• Large Acme thread closure
10" . . . . . . . . . . .
10" . . . . . . . . . . .
20" . . . . . . . . . . .
20" . . . . . . . . . . .
Inlet/Outlet
Flow Rate
Part#
1.5"
20 GPM
D1004443
1"
1"
1.5"
15 GPM
15 GPM
20 GPM
D1004442
FC150367
D1004444
Siemens
Water Technologies
BACK
32
CARTRIDGE FILTERS
Cartridge End Caps
The following table is presented as reference when ordering filter cartridges. For
more detailed information, please contact our Technical Support Team at 800-8757873 ext. 5000.
CARTRIDGE DESIGN
DESCRIPTION
Code F Style Cartridges
Double open end with flat gasket
Code 10 Style Cartridges
Single Open End with 1-120
Internal O-Ring at Open End
Code O Style Cartridges
Single Open End with
2-222 O-Ring with Seal
Single Open End
2-222 O-Ring Seal and
Spear End Assembly
Single Open End with
2-226 O-Ring Locking Seal and
Spear End Assembly
Code K SOE plastic spring
assembly, saw cut end
Gaskets compressed
on knife edge seal
of housing
Single O-ring
located inside
the cartridge
CODE
F
10
O-rings are located
externally on the
cartridge
0
O-rings are located
externally on the
cartridge
5
O-rings are located
externally on the
cartridge. The adapter
7
locks into the housing
with spear assembly
Knife edge SOE
with spring seal
K
Siemens
Water Technologies
BACK
33
CARTRIDGE FILTER - ACTIVATED CARBON
Granular Activated Carbon Filter Cartridge
• Composed of lignite-based granular activated carbon in an upflow cartridge
design for removing chlorine feed water
• Cartridge is designed to allow water to enter the bottom of the cartridge, then
filtered through the entire carbon bed before exiting at the top to maximize
the contact time and therefore the adsorption
• Internal expansion pad maintains a tight, compact column to minimize
channeling or bypass
• Nominal 20 micron post-filter reduces carbon fines as well as other suspended
particles
SPECIFICATIONS
Dimensions
10" Cartridge
20" Cartridge
Diameter (OD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length (in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.875" (7.3 cm)
9.75" (24.8 cm)
2.875" (7.3 cm)
20" (50.8 cm)
10" Cartridge Maximum . . . . . . . . . . . . . . . . . . . . .
1.0 gpm (3.8 lpm)
2.0 gpm (7.6 lpm)
Filter Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Post filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expansion Pad Foam . . . . . . . . . . . . . . . . . . . . . . .
Outer Casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Granular, Activated Carbon
Spun Polypropylene
Polyether/Polyurethane
Polystyrene
Polystyrene
Buna-N
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . .
32 to 125°F (0 – 52°C)
Recommended Water Flow Rates
Materials
Operating Parameters
Carbon Volume . . . . . . . . . . . . . . . . . . . . . . . . . .
12 ounces of granular carbon per 10" length
Catalog Number
Description
FCGC . . . . . . . . . . . . .
Filter cartridge granular carbon
XX . . . . . . . . . . . . . . .
Length (in): 10 = 10, 20 = 20
F.................
20 . . . . . . . . . . . . . . . .
Cartridge Code: F = flat gasket seal
Nominal micron retention rating
To determine your catalog order number, replace the X with one of the numbered or lettered options beside it.
Siemens
Water Technologies
BACK
34
CARTRIDGE FILTER - ACTIVATED CARBON
Pulverized Activated Carbon Filter
Cartridge
• Composed of pre-washed, finely pulverized activated carbon, encapsulated in a
depth filtration media of highly purified alpha-cellulose and synthetic fibers for
removing chlorine
• Depth-type cartridge ensures superior dirt holding capacity in sediment-laden
waters to minimize premature exhaustion while it is being carbon treated
• Design includes a thermally bonded outer, nominal 10 micron pre-filtration
layer that provides for depth filtration in one pass without carbon channeling
or media migration
SPECIFICATIONS
Dimensions
10" Cartridge
20" Cartridge
Maximum . . . . . . . . . . .
1.0 gpm (3.8 lpm)
2.0 gpm (7.6 lpm)
Primary filter media . . . . . . . . . . . . . . . .
Inner Layer Media . . . . . . . . . . . . . . . . .
Inner Core . . . . . . . . . . . . . . . . . . . . . . .
Outer Netting . . . . . . . . . . . . . . . . . . . . .
End Caps. . . . . . . . . . . . . . . . . . . . . . . .
Pulverized, Activated Carbon
Alpha Cellulose and Synthetic Fibers
Polypropylene
Polyolefin
Low Durometer Polyethylene
Temperature Range . . .
32 to 125°F (0 – 52°C)
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.75" (7.0 cm)
9.75" (24.8 cm)
Materials
Carbon Volume
...................
2.75" (7.0 cm)
20" (50.8 cm)
3.7 ounces of pulverized carbon per 10" length
Catalog Number
Description
FCPC . . . . . . . . . . . . . . Filter cartridge pulverized carbon
F . . . . . . . . . . . . . . . . . . Cartridge Code: F = double open end w/flat gasket seal
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20
10 . . . . . . . . . . . . . . . . . Nominal micron retention rating
Siemens
Water Technologies
BACK
35
CARTRIDGE FILTER - PARTICULATE
DI GARD™ String Wound Prefiltration
Cartridges
• Designed for a variety of prefiltration applications such as SDI (service
deionization), reverse osmosis, and CDI® (Continuous Deionization) systems
• String wound type filter with your choice of cotton, industrial or surfactant-free
polypropylene string over a polypropylene core
• Large void volume design for low-cost, reliable filtration performance with high
contaminant holding capacity
• Continuous filter winding in 20-, 30-, and 40-inch lengths prevents by-passing
or excessive pressure drops at the seams
• Gasketed end caps on 0.5 µm rated filters for positive sealing that eliminates
by-passing
• Surfactant-free FCPX style filter meets USP Class VI Biological Tests for Plastics
requirements
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.5" (6.5 cm)
9.75, 10, 19.5, 20, 29.25, 30, 40
FCCS . . . . . . . . . . . . . .
FDA-Listed bleached white cotton fiber string
media with polypropylene core
FDA-Listed polypropylene fiber string media
with polypropylene core
Surfactant-free polypropylene fiber string
media with polypropylene core
NOTE: Code F cartridges (0.5 µm) have
santophrene end seals.
Materials
FCPS . . . . . . . . . . . . . .
FCPX . . . . . . . . . . . . . .
...................
Maximum Temperature . . . . . . . . . . . . .
Maximum Differential Pressure @ 25°C
Micron Ratings. . . . . . . . . . . . . . . . . . . .
Filtration Efficiency . . . . . . . . . . . . . . . .
Recommended Water Flow Rates . .
140°F (60°C)
50 psi (3.4 bar)
0.5, 1, 3, 5, 10, 20, 50 Microns
Nominal 90%
5.0 gpm/10" length (18.9 lpm/10" length)
Catalog Number
Description
FCXX . . . . . . . . . . . . . . FCCS = FDA-Listed bleached cotton string fiber
FCPS = FDA-Listed polypropylene string fiber
FCPX = surfactant-free polypropylene string fiber cartridge
F . . . . . . . . . . . . . . . . . . Cartridge Code: F = double open end
XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 19 = 19.5, 20 = 20,
29 = 29.25, 30 = 30, 40 = 40
XX . . . . . . . . . . . . . . . . . Micron Rating: S5 = 0.5µm, 01 = 1 µm, 03 = 3 µm,
05 = 5 µm, 10 = 10 µm, 20 = 20 µm, 50 = 50 µm
To determine your catalog order number, replace the X with one of the numbered or lettered options
beside it. Note: Not all part number combinations are available; consult Technical Support for
assistance.
BACK
Siemens
Water Technologies
36
ROGARD™ Graded Density Polypropylene
Media Filter Cartridge
• Designed for a variety of prefiltration applications such as SDI (service deionization),
reverse osmosis and CDI® (Continuous Deionization) systems
• Graded density melt spun polypropylene media design for exceptional throughput,
with high contaminant holding capacity
• Gasketed end caps on 1, 3 and 5 µm rated filters for positive sealing that eliminates
bypass contamination
• Manufactured from materials which are listed for food contact applications in Title
21 of the U.S. Code of Federal Regulations. Product in compliance with EU Directive
2002/72/EC for plastic in food contact (in simulants A, B, C, and D).
• All polypropylene components meet the specifications for biological safety as per the
USP for Class VI-121˚C plastics (gaskets/O-rings excluded).
• FCRO Series filter cartridges are free of surfactants, anti-static agents, binders, and
adhesives
• NSF Certified
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.5" (6.5 cm)
9.75, 10, 12, 19.5, 20, 30, 31, 40
Media . . . . . . . . . . . . . .
Core . . . . . . . . . . . . . . .
O-Rings. . . . . . . . . . . . .
Gaskets. . . . . . . . . . . . .
Melt blown polypropylene
Integral polypropylene core
Silicone o-rings
Santoprene end seals
Micron Ratings. . . . . . . . . . . . . . . . . . . .
Recommended Water Flow Rate . . .
140°F @ 25 psid
50 psi (3.4 bar)
1, 3, 5, 10, 20, 25, 50, 75 microns
Nominal 90%
Materials
Catalog Number and Description
FCRO . . . . . . . . . . . . . . Rogard II all polypropylene depth cartridge
X . . . . . . . . . . . . . . . . . . Cartridge Code:
F = double open end (1&5 µm w/gasket)
K = knife edge seal with spring seal
0 = 2-222 o-rings (12&20", 1&5 µm only)
N = double open end (1, 3 & 5 µm – no gasket)
XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 12 = 12, 19 = 19.5,
20 = 20, 30 = 30, 31 = 31, 40 = 40
XX . . . . . . . . . . . . . . . . . Micron Rating: 01 = 1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm,
20 = 20 µm, 25 = 25 µm, 50 = 50 µm, 75 = 75 µm
assistance.
Siemens
Water Technologies
BACK
37
Prepure DP™ Graded Density
Polypropylene Depth Media Filter Cartridge
• Composed of graded density melt blown polypropylene depth media for high
efficiency prefiltration and post-filtration of DI resin applications
• Prepure DP™ filtration cartridges feature high contaminant loading due to graded
density depth filtration media construction
• FDA Listed Materials - Manufactured from materials which are listed for food
contact applications in Title 21 of the U.S. Code of Federal Regulations
• All components meet the specifications for biological safety as per the USP for Class
VI-121˚C plastics (gaskets/O-rings excluded).
• Virgin polypropylene construction with fusion welding minimizes extractables
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.6" (6.6 cm)
9.75, 10, 20, 30, 40
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Polypropylene caps, core and cage
Non-woven melt blown polypropylene
Silicone o-rings and gaskets
180°F (82°C) @ 15 psid
75 psid (5.2 bard)
Nominal 90%
0.5 – 5 micron. . . . . . . .
10 – 50 micron . . . . . . .
Materials
Sanitizing Agents . . . .
Chlorine or hydrogen peroxide
FCDP . . . . . . . . . . . . . . All polypropylene depth filter cartridge
X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings
7 = 2-226 o-rings w/spear
1 = single open end w/internal o-ring
F = double open end w/flat gasket seal
XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40
XX . . . . . . . . . . . . . . . . . Micron Rating: S5 = 0.5 µm, 01 = 1 µm, 03 = 3 µm, 05 = 5 µm,
10 = 10 µm, 25 = 25 µm, 50 = 50 µm
assistance.
Media Grade
S5
1
3
5
10
25
50
Nominal
.5
1
3
5
10
25
50
99.9% Abs
1
3
5
10
20
40
70
Siemens
Water Technologies
BACK
38
NT Series Graded Pore Polypropylene
Depth Filter Cartridge
• Designed to deliver precision prefiltration through the patented advanced melt
blown structure that incorporates large diameter fibers for strength while
maintaining small fibers for filtration
• High purity, 100% polypropylene construction is free of surfactants, binders
and adhesives
• FDA Listed Materials - Manufactured from materials listed for food contact
applications in Title 21 of the U.S. Code of Federal Regulations. Product (3
micron and higher) in compliance with EU Directive 2002/72/EC for plastic in
food contact (in simulants A, B, C, and D).
• Toxicity - All polypropylene components meet the specifications for biological
safety as per the USP for Class VI-121˚C plastics (gaskets/O-rings excluded).
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.5" (6.5 cm)
9.75, 10, 20, 30, 40
Materials
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Maximum Temperature
0.5-10 µm: . . . . . . . . . . . . . . . . . . .
15-120 µm: . . . . . . . . . . . . . . . . . . .
0.5 – 3 micron. . . . . . . .
5 – 75 micron . . . . . . . .
Sanitizing Agents . . .
Polypropylene caps and core
CoLD® fiber melt blown polypropylene
Silicone o-rings and Santoprene® gaskets
15 psid (1.03 bard) @ 180˚F (82˚C)
25 psid (1.72 bard) @ 150˚F (66˚C)
60 psid (4.14 bard) @ 86˚F (30˚C)
25 psid (1.72 bard) @ 140˚F (60˚C)
50 psid (3.45 bard) @ ambient
60 psi (4.1 bar)
Nominal 90%
Chlorine, hydrogen peroxide
Autoclaving:
Single open end FCNT Series filter cartridges can be autoclaved for 30 minutes at 250˚F
(121˚C) under no end load conditions. However, filter cartridges should be allowed to cool to
normal system operating temperatures prior to use.
Steam Sterilization:
Not recommended.
FCNT . . . . . . . . . . . . . . Polypropylene CoLD® depth filter cartridge
7 = 2-226 o-ring locking tabs w/spear
N = double open end (0.5 – 5 mm – no gasket)
XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40
10 = 10 µm, 15 = 15 µm, 20 = 20 µm, 30 = 30 µm, 40 = 40 µm,
50 = 50 µm, 75 = 75 µm
Siemens
Water Technologies
assistance.
BACK
39
Postpure PP™ Graded Density Pleated
Polypropylene Depth Media Filter Cartridge
• Composed of graded-density, pleated, polypropylene depth media for high efficiency
postfiltration of DI resin applications
• FDA Listed Materials - Manufactured from materials which are FDA listed for food
contact applications in Title 21 of the U.S. Code of Federal Regulations.
• Toxicity - All polypropylene components meet the specifications for biological safety as
per the USP for Class VI-121˚C plastics (gaskets/O-rings excluded).
• Cartridges are free of resins, binders and adhesives.
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.6" (6.6 cm)
10, 20, 30
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
...................
Seals . . . . . . . . . . . . . . .
Pleated, non-woven melt blown
polypropylene
150°F (65°C) @ 40 psid (2.8 bard)
75 psid (5.1 bard)
nominal 90%
0.3 – 1 micron. . . . . . . .
3 – 30 micron . . . . . . . .
Materials
Sanitizing Agents
Chlorine, hydrogen peroxide, in-line with hot water (82°C) for one hour, autoclaved for
20 minutes at 121°C under no load conditions.
Sterilization
Multiple autoclaving for 30 minutes at 250˚F (121˚C) under no end load conditions. Inline steam sterilization is not recommended. May be in-line sanitized with hot water at
180˚F (82˚C) for 1 hour.
FCPP . . . . . . . . . . . . . . All polypropylene, pleated, nominal depth filter cartridge
5 = 2-222 w/spear
7 = 2-226 o-rings locking tabs w/spear
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30
XX . . . . . . . . . . . . . . . . . Micron Rating: S3 = 0.3 µm, S6 = 0.6 µm, 01 =1 µm,
03 = 3 µm, 05 = 5 µm, 10 = 10 µm, 30 = 30 µm
assistance.
Siemens
Water Technologies
BACK
40
NA Series Absolute Rated Polypropylene
Depth Filter Cartridge
• Absolute filtration with sharp particle cutoffs deliver precise removal
efficiencies
• Patented melt blown structure provides outstanding retention efficiency,
mechanical strength, and long on-stream life
• High purity, 100% polypropylene construction is free of surfactants, binders and
adhesives making these cartridges ideal for use in food and beverage
applications
• FDA Listed Materials - Manufactured from materials which are listed for food
contact applications in Title 21 of the U.S. Code of Federal Regulations. Product
(5 micron and higher) in compliance with EU Directive 2002/72/EC for plastic in
food contact (in simulants A, B, C, and D).
• Toxicity - All polypropylene components meet the specifications for biological
safety as per the USP for Class VI-121˚C plastics (gaskets/O-rings excluded).
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
Materials
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
0.5-20 µm: . . . . . . . . . . . . . . . . . . .
30-120 µm: . . . . . . . . . . . . . . . . . . .
Filtration Efficiency
2.5" (6.5 cm)
9.75, 10, 20, 30, 40
Polypropylene caps and core
CoLD® fiber melt blown polypropylene
15 psid (1.03 bard) @ 180˚F (82˚C)
25 psid (1.72 bard) @ 150˚F (66˚C)
60 psid (4.14 bard) @ 86˚F (30˚C)
25 psid (1.72 bard) @ 140˚F (60˚C)
50 psid (3.45 bard) @ ambient
60 psi (4.1 bar)
Absolute (> 99.9% Retention Rating by
ASTM F-795 Test)
0.5 – 5 micron. . . . . . . .
10 – 70 micron . . . . . . .
Sanitizing Agents
...................
Autoclaving
Single open end Nexis® Series filter cartridges can be autoclaved for 30 minutes at 250˚F
(121˚C) under no end load conditions. However, filter cartridges should be allowed to cool to
normal system operating temperatures prior to use.
Steam Sterilization
Not recommended
FCNA . . . . . . . . . . . . . . Absolute rated CoLD depth filter cartridge
1 = single open end w/ internal o-ring
XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40
10 = 10 µm, 15 = 15 µm, 20 = 20 µm, 30 = 30 µm, 50 = 50 µm,
70 = 70 µm
Siemens
Water Technologies
beside it. Note: Not all part number combinations are available; consult Technical Support for assistance.
BACK
41
WN Series Pleated Polysulfone Membrane
Filter Cartridge
• Composed of pleated highly asymmetric polysulfone membrane over a nonwoven polypropylene support layer
• For high flow rates and low pressure drops, absolute rated filters are designed
for postfiltration in high purity water applications
• High-purity construction materials are factory rinsed with DI water for quick onstream rinse up with a minimum of throughput
• Meets criteria for USP Class VI Biological tests for plastics, ensuring that no
surfactants or coatings interfere with the application
• FDA listed materials - manufactured from materials which are FDA listed for
food contact applications in Title 21 of the U.S. code of Federal Regulations
SPECIFICATIONS
Dimensions
Diameter (OD)
Length (in)
...............
...............
2.6" (6.6 cm)
9.75, 10, 20, 30, 40
Cartridge
...............
Materials
Media
Seals
...............
...............
Single layer asymmetric hydrophilic polysulfone
Maximum Temperature . . . . . . . . . . . . . .
Maximum Differential Pressure @ 20°C .
Filtration Efficiency . . . . . . . . . . . . . . .
...............
180°F (82°C) @ 50 psid (3.4 bard)
80 psi (5.5 bar)
Absolute (> 99.9% Retention Rating by
Latex Bead Challenge)
0.05 micron
0.1 micron
0.2 micron
0.45 micron
...............
...............
...............
...............
...............
5% Chlorine, 3% hydrogen peroxide
Sanitizing Agents
FCWN . . . . . . . . . . . . . . Filter cartridge single layer polysulfone
7 = 2-226 o-rings w/locking tabs/spear end
XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40
XX(X) . . . . . . . . . . . . . . Micron Rating: S05 = 0.05 µm, S1 = 0.1 µm, S2 = 0.2 µm, S4 = 0.45 µm
Note: Not all part number combinations are available; consult Technical Support for assistance.
Siemens
Water Technologies
BACK
42
WE Series Pleated Polysulfone Membrane
Filter Cartridge
• Composed of a double layer of integrity testable, highly asymmetric polysulfone
membrane. These absolute rated filters offers superior bacteria and particle
removal for high efficiency postfiltration for critical high purity water applications
• Long on stream life, high flow rates and low pressure drops result from the
membrane asymmetry
• High-purity construction materials are factory flushed with DI water for quick
on-stream rinse-up with a minimum of throughput
• All polypropylene hardware and thermal welding minimizes extractables
• All materials are FDA listed for contact with food and beverages
SPECIFICATIONS
Dimensions
Diameter (OD) . . . . . . . . . . . . . . . . . . . .
Length (in) . . . . . . . . . . . . . . . . . . . . . . .
Materials
Cartridge . . . . . . . . . . . . . . . . . . . . . . . . .
Media . . . . . . . . . . . . . . . . . . . . . . . . . . .
polysulfone
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Rinse in @ 5-6 gpm per 10" to ensure removal of air
and microbubbles between the membrane layers,
especially with 0.02µ. Recommend flow per 10" is 2 gpm.)
Maximum Operating Temperature . . . . .
Maximum Forward Differential Pressure
................................
................................
Filtration Efficiency . . . . . . . . . . . . . . . . .
Sanitizing Agents
................................
Integrity Test
Pore Size . . . . . . . . . . . . . . . . . . . . . . . .
2.6" (6.6 cm)
9.75, 10, 20, 30, 40
Double layer asymmetric hydrophilic
86°F / 30°C (158˚F / 70˚C)
80 psid @68˚F / 5.5 bar @ 20˚C
20 psid @ 158˚F / 1.4 bar @ 70˚C
99.9% Absolute
5% Chlorine or 3% hydrogen peroxide
Diffusional Flow (cc/min) @ Test Pressure
per 10” length
Diffusional Flow Valves (100% H20) (cc/min) @ Test pressure per 10” length
0.02 µm . . . . . . . . . . . . . . . . . . . . . . . . .
< 30 cm3/min @ 50 psig / 3.4 bar
0.1 µm . . . . . . . . . . . . . . . . . . . . . . . . . .
< 24 cm3/min @ 25 psig / 1.7 bar
0.2 µm . . . . . . . . . . . . . . . . . . . . . . . . . .
< 20 cm3/min @ 20 psig / 1.4 bar
0.45 µm . . . . . . . . . . . . . . . . . . . . . . . . .
< 15 cm3/min @ 15 psig / 1.0 bar
Catalog Number:
FCWE . . . . . .
X. . . . . . . . . .
XX. . . . . . . . .
XX(X) . . . . . .
Filter cartridge double layer polysulfone
Cartridge Code:
0 = 2-222 o-rings
1 = single open end w/ internal o-rings
Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40
Micron Rating: S02 = 0.02 µm, S1 = 0.1 µm, S2 = 0.2 µm, S4 = 0.45 µm
To determine your catalog order number, replace the X with one of the numbered/lettered options
beside it.
Siemens
Water Technologies
BACK
43
DI Series Pleated Hydrophilic PVDF Media
Pharmaceutical/Biotech Grade Filter
Cartridge
• Composed of a validatable, hydrophilic, PVDF membrane. Offering a high velocity DI
water flush for quick rinse-up with no downstream contamination.
• These absolute rated filters offer superior bacteria and particle removal for
critical high purity postfiltration applications
• Filters have single PVDF membrane with two layers of polypropylene support media to
ensure absolute bacteria retention with typical LRV >8
• The all PVDF membrane can be sanitized with chlorine, hydrogen peroxide or steam
• Virgin polypropylene construction with fusion welding minimizes extractables
• Cartridges are 100% integrity tested to verify absolute sub-micron particle retention
SPECIFICATIONS
Dimensions
Diameter (OD) . . . . . . . . . . . . . . . . . . . . .
Length (in) . . . . . . . . . . . . . . . . . . . . . . . .
Materials
Cartridge . . . . . . . . . . . . . . . . . . . . . . . . .
2.75" (7.0 cm)
10, 20, 30, 40
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydrophilic PVDF
Maximum Temperature . . . . . . . . . . . . . .
Maximum Differential Pressure @ 25°C .
Filtration Rating . . . . . . . . . . . . . . . . . . . .
176°F (80°C) @ 25 psid (1.7 bar)
50 psi (3.4 bar)
100% Absolute
0.1 micron . . . . . . . . . . . . . . . . . . . . . . . .
0.2 micron . . . . . . . . . . . . . . . . . . . . . . . .
Sanitizing Agents
Sterilization
30 SIP cycles of 30 min @ 121˚C; 30 autoclave cycles of 60 min @ 121˚C
Integrity Test
Pore Size . . . . . . . . . . . . . . . . . . . . . . . . .
...............................
0.1 µm . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2 µm . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum Water
Bubble Point @ 23˚C
> 70 psig (≥ 4.8 bar)
> 45 psig (≥ 3.1 bar)
Diffusional Flow (cc/min)
@ Test Pressure per 10" length in water
< 20 @ 56 psig (3.8 bar)
< 13.3 @ 40 psig (2.8 bar)
FCDI . . . . . . . . . . . . . . . Filter cartridge Water DI
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40
XX . . . . . . . . . . . . . . . . . Micron Rating: S1 = 0.1 µm, S2 = 0.2 µm
To determine your catalog order number, replace the X with one of the numbered or lettered options beside it. Note: Not all part
number combinations are available; consult Technical Support for assistance.
Siemens
Water Technologies
BACK
44
PV Series Pleated Hydrophilic PVDF Media
Pharmaceutical Grade Filter Cartridge
• Cartridge is a validated, pleated hydrophilic PVDF membrane over a non-woven
polypropylene support layer
• Code 0, Code 5, and Code 7 configurations are available in 10, 20 30, and 40-in lengths that are
100% tested in manufacturing to ensure absolute bacteria retention with typical titre reduction
7
2
of >10 /cm
7
2
• Quantitative retention of 10 CFU/cm Brevundimonas diminuta ATCC® 19146 per ASTM
methodology
• Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These
products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride
extraction
• Component materials meet the “non-fiber releasing” criteria as defined in 21 CFR 210.3 (b) (6)
• Will meet the USP Oxidizable Substances Test requirements after a water flush of <1 L
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.75" (7.0 cm)
10, 20, 30, 40
Materials
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Filtration Rating . . . . . . . . . . . . . . . . . . .
Toxicity. . . . . . . . . . . . . . . . . . . . . . . . . .
Validation . . . . . . . . . . . . . . . . . . . . . . . .
0.2 µm . . . . . . . . . . . . .
PVDF
Silicone o-rings
176°F (80°C) @ 25 psid (1.7 bar)
80 psi (5.5 bar)
100% Absolute
Non-toxic by USP Class VI biological test for plastics
Quantitative Retention of 107 CFU/cm2 per ASTM methodology
Sanitizing Agents
...................
Sterilization
...................
30 SIP cycles of 30 min @ 135˚C; 30 autoclave cycles
of 60 min @ 126˚C
Integrity Test
Pore Size
Minimum Water
Bubble Point @ 23˚C @ Test Pressure per 10" length
> 50 psig (> 3.45 bar) < 13.3 @ 40 psig (3.1 bar)
0.2 µm . . . . . . . . . . . . .
FCPV . . . . . . . . . . . . . . Filter cartridge pharmaceutical/validated
5 = 2-222 o-rings w/spear end
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30
S2 . . . . . . . . . . . . . . . . . Micron Rating: S2 = 0.2 µm
Siemens
Water Technologies
BACK
45
VH Series Pleated PES Media
Pharmaceutical Grade Filter Cartridge
• Cartridge is a validated, pleated polyethersulphone membrane over a non-woven
polyester support layer
• Code 0, Code 5, Code 7 and Code 10 configurations are available in 10, 20 30,
and 40-in lengths that are 100% tested in manufacturing to ensure absolute
bacteria retention
• Materials conform to the relevant requirements of 21CFR Part 177 and current
USP Plastics Class VI-121˚C and ISO10993 equivalents
• FCVH Series Sterilizing Grade 0.2 micron filters are validated by bacterial challenge
7
2
testing to methods specified in ASTM F838-83 (10 organisms/cm minimum)
11
with typical in-house challenge levels being 10
per 10 inch module for
Brevundimonas diminuta
• Contain no surfactants or coatings to interfere with your application, and the
thermo-plastic construction process minimizes extractables.
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
Materials
Cartridge . . . . . . . . . . . .
2.75" (7.0 cm)
10, 20, 30, 40
Support . . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Toxicity. . . . . . . . . . . . . . . . . . . . . . . . . .
Validation . . . . . . . . . . . . . . . . . . . . . . . .
Polypropylene, core and cage, nylon endcaps
with 316LSS insert
Polyester
Polyethersulphone
Silicone o-rings
176°F (80°C) @ 29 psid (2.0 bard)
72 psi (5.0 bar)
100% Absolute
Microbially retentive and validated to ASTM F838-83
methodology
0.1 µm . . . . . . . . . . . . .
0.2 µm . . . . . . . . . . . . .
0.45 µm . . . . . . . . . . . .
Sanitizing Agents
Chlorine, hydrogen peroxide, autoclaved for 20 minutes at 121°C under no load conditions.
Sterilization
FCVH cartridges can be repeatedly in-situ steam sterilized or autoclaved up to 130˚C (266˚F). They can be
sanitized with hot water at up to 90˚C (194˚F) and are compatible with a wide range of chemicals.
Integrity Test
Pore Size . . . . . . . . . . . . . . . .
Minimum Water
Bubble Point
@ Test Pressure per 10" length
0.1 µm . . . . . . . . . . . . . . . . . .
≥ 34.2 psig*
≤ 27 @ 70 psig (4.9 bar)
0.2 µm . . . . . . . . . . . . . . . . . .
≥ 49 psig
≤ 16 @ 40 psig (2.7 bar)
0.45 µm . . . . . . . . . . . . . . . . .
≥ 36 psig
≤ 16 @ 25 psig (1.7 bar)
* 60/40 IPA water test solution
FCVH . . . . . . . . . . . . . . Filter cartridge pharmaceutical/validated
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40
XX . . . . . . . . . . . . . . . . . Micron Rating: S1 = 0.1 µm, S2 = 0.2 µm, S4 = 0.45 µm
BACK
Siemens
Water Technologies
46
UF Series Hollow Fiber Polysulfone Media
Filter Cartridge
• Composed of validatable hollow fiber polysulfone media with polypropylene
hardware
• These absolute rated filters offer excellent bacteria, particle and pyrogen removal
for critical pharmaceutical and life science applications, at economical costs
• Code 0, Code 5, and Code 7 configurations are available in 10, 20, 30 and
40-in lengths
• Meet current USP Class VI biological test for plastics, with a validation
certificate available
• Contain no surfactants or coatings to interfere with your application, and
thermo-plastic construction process minimizes extractables
• Hollow fiber construction ensures strength, while exhibiting low pressure drop
and exceptionally high flow rates
• Multi-tube applications require special housings - contact Technical Support
SPECIFICATIONS
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.9" (7.4 cm)
10, 20, 30, 40
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Polypropylene caps and cage, polyurethane end sealant
Polysulfone fibers
Silicone o-rings
Maximum Differential Pressure . . . . . . .
Toxicity. . . . . . . . . . . . . . . . . . . . . . . . . .
Validation . . . . . . . . . . . . . . . . . . . . . . . .
185°F (85°C) @ 10 psid (.7 bar)
30 psi (2 bar) @ 25°C
100% Absolute
Diffusive flow test methods
0.05 micron . . . . . . . . . .
0.1 and 0.2 micron . . . .
Materials
Sanitizing Agents
...................
...................
Chlorine, hydrogen peroxide, autoclaved for 20 minutes
at 121°C under no load conditions
FCUF . . . . . . . . . . . . . . Filter cartridge ultra filter
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40
XX(X) . . . . . . . . . . . . . . Micron Rating: S05 = 0.05 µm, S1 = 0.1 µm, S2 = 0.2 µm
To determine your catalog order number, replace the X with one of the numbered or lettered options beside it. Note: Not
all part number combinations are available; consult Technical Support for assistance.
Siemens
Water Technologies
BACK
47
CARTRIDGE FILTER - HOUSING
316 Stainless Steel, Single-Tube
Filter Housing
For Code F
This single-tube cartridge filter housing is made of cast 316 stainless steel and
includes 316 stainless steel shell. Housings are available to accommodate 10, 20
or 30-in Code F filter cartridges. The inlet and outlet are 3/4" NPT, and the bowl
of each housing is fitted with a 1/4" NPT drain plug. This cartridge filter housing
is ideal for a wide variety of low flow applications requiring a high quality prefilter
housing or for applications where an industrial pre-filter is used.
• Single tube housings accommodate 10", 20" and 30" Code F filter cartridges
• Housing uses 316SS for construction of the head, bowl and port plug
• Inlet and outlet connections are made to the housing head, allowing cartridges
to be replaced without disconnecting the inlet/outlet piping
• Housing can be autoclaved or hot-water sanitized with the cartridges in place
for your convenience
SPECIFICATIONS
Dimensions
10-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Materials
Length (A)
13.5" (34.3 cm)
23.5" (59.7 cm)
33.5" (85.1 cm)
Width (B)
4.75 (12.1 cm)
4.75 (12.1 cm)
4.75 (12.1 cm)
Bowl and Head . . . . . . . . . . . . . . . . . . .
Port Plugs . . . . . . . . . . . . . . . . . . . . . . .
O-ring. . . . . . . . . . . . . . . . . . . . . . . . . . .
316 stainless steel
316 stainless steel
Ethylene Propylene
Max Operating Pressure . . . . . . . . . . .
Max Housing Flow Rate . . . . . . . . . . . .
175 psi (12.1 bar) @ 200°F (93°C)
12 gpm (45.4 lpm)
Note: Housing rating only, safe operating pressure
will depend on filter cartridge and gaskets used.
Connections
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . . .
Drain . . . . . . . . . . . . . . . . . . . . . . . . . . .
3/4" NPT
1/4" NPT
Mounting
Should be mounted by rigid pipe connections or with optional mounting bracket. Allow enough
clearance below bottom of housing to allow cartridge to be changed.
Flow Direction
“Inlet” and “Outlet” are cast on the housing head for user convenience.
ZHDFD1001
10" housing
ZHDFD2001
20" housing
ZHDXDB001
Mounting Bracket
ZHDFD3001
B10015866
30" housing
Shell O-ring EPDM
Siemens
Water Technologies
BACK
48
316L Stainless Steel, Single-Tube
Filter Housing
For Code O
This single-tube cartridge filter housing is made of 316L stainless steel and
includes 316 stainless steel port plugs. Housings are available to accommodate
10, 20 or 30-in Code 0 filter cartridges. The inlet and outlet are 3/4" NPT, and the
bowl of each housing is fitted with a 1/4" NPT drain plug. This cartridge filter
housing is ideal for a wide variety of low flow applications requiring a high
quality prefilter housing or for applications where an industrial pre-filter is used.
• Inlet and outlet connections are made to the housing head, allowing cartridges
to be replaced without disconnecting the inlet/outlet piping
• Bowl incorporates a satin finish to help prevent bacterial build-up
• Housing can be autoclaved or hot-water sanitized with the cartridges in place
for your convenience
• Two vent ports are included in the head for venting, or for the installation of
pressure gauges
Dimensions
10-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Materials
Head . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bowl and Plugs . . . . . . . . . . . . . . . . . . .
O-ring. . . . . . . . . . . . . . . . . . . . . . . . . . .
Length (A)
14.8" (37.5 cm)
24.8" (62.9 cm)
34.8" (88.4 cm)
Width (B)
4.2 (10.5 cm)
4.2 (10.5 cm)
4.2 (10.5 cm)
316L stainless steel
316 stainless steel
EPDM
Surface Finish
Head . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cartridge Sealing Surface . . . . . . . . . . .
Bowl. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sand Blasted Finish
32 RMS Finish
Satin Finish
Max Inlet Pressure . . . . . . . . . . . . . . . .
175 psi (12.1 bar) @ 150°F(66°C)
Note: Housing rating only, safe operating
pressure will depend on filter cartridge and
gaskets used.
Connections
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . . .
Drain and Vent. . . . . . . . . . . . . . . . . . . .
3/4" NPT
1/4" NPT
Mounting
Should be mounted by rigid pipe connections or optional mounting bracket. Allow enough
clearance below bottom of housing to allow cartridge to be changed.
Flow Direction
“Inlet” and “Outlet” are electroetched on the housing head for user convenience.
ZHD0D1001
10" housing
ZHD0D2001
20" housing
ZHDXDB001
Mounting Bracket
ZHD0D3001
B10015866
30" housing
Shell O-ring EPDM
Siemens
Water Technologies
BACK
49
316L Electropolished Stainless Steel,
Multi-Tube Filter Housing
For Code 5 or Code O
This multi-tube cartridge filter housing is made of electropolished 316L stainless steel.
Housings are available to accommodate 7 cartridges in 10, 20, 30 or 40" length, Code 5
or Code 0 configurations with two 222 o-rings. The bottom of each housing is fitted with
a 3/4" NPTF drain plug. And each housing is equipped with a NPTF vent at the top of the
housing. A V-band clamp closure allows cartridges to be changed quickly and easily.
• Housing uses electropolished 316L stainless steel construction that is easy to clean and
provides maximum corrosion resistance
• Predrilled support stand allows the housing to be secured to floor or some mounting
surface
• A 1/4" NPTF air vent plug on the cover allows venting before start-up
FILTER HOUSING SPECIFICATIONS
Dimensions
Inlet/Outlet Housing Dimensions
(inches (cm)
7-round 10"
7-round 20"
7-round 30"
7-round 40"
Materials
2" NPTM (5.1)
2" NPTM (5.1)
2" NPTM (5.1)
2" NPTM (5.1)
A
25 (64)
33.5 (85)
44 (112)
54.5 (138)
Head and Shell . . . . . . . . . . . . . . . . . . .
Vent and Drain Plug . . . . . . . . . . . . . . .
Seat Cups . . . . . . . . . . . . . . . . . . . . . . .
O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . .
B
11.5 (29)
11.5 (29)
11.5 (29)
11.5 (29)
C
5.5 (14)
5.5 (14)
5.5 (14)
5.5 (14)
D
12 (30)
12 (30)
12 (30)
12 (30)
Flange Option Max. Flow
E
12.8" (32)
12.8" (32)
12.8" (32)
12.8" (32)
Rate*/gpm (lpm)
35 (132)
70 (264)
105 (398)
140 (530)
316L Stainless Steel electropolished
316 Stainless Steel
316L Stainless Steel
Ethylene Propylene
Maximum Operating Pressure . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)
Maximum Water Flow Rate* . . . . . . . . . 140 gpm (528 Lpm)
*Housing rating only, cartridge length and type will effect maximum flow rates
Catalog Number
Description
Inlet/Outlet
ZHH000720
2" NPTM
ZHH000710
7-round 10"
ZHH000730
7-round 30"
ZHH000740
ZHH000710F
2" NPTM
7-round 20"
2" NPTM
7-round 40"
2" NPTM
7-round 10"
2" flange
ZHH000720F
7-round 20"
2" flange
ZHH000740F
7-round 40"
2" flange
ZHH000730F
B10016248
7-round 30"
2" flange
Spare Housing O-Ring
EPDM
Siemens
Water Technologies
BACK
50
316L Stainless Steel, Multi-Tube High Purity
Housing
For Code 0 and Code 5, option for Code 7
This multi-tube cartridge filter housing is made of 316L stainless steel, and suited
to high purity and sanitary applications. These housings include options to
accommodate Code 0 and 5 or Code 7 filter cartridges.
• High quality, crevice free construction
• External mirror polished, internally polished to 32 Ra–EP option
ZHHP 3/5/8 Round
• Steam sterilizable
• Sanitary Tri-Clamp, vent and drain connections
• Band clamp or Rathmann style screw clamp (used on 12, 18, 24 and 30
round vessels) body closure as standard for additional security
• Inlet/outlet available with Tri-Clamp (below) or ANSI flange connections
• Available in Code 0 and 5 (below) or optional Code 7 end cap configuration
PRODUCT SPECIFICATIONS
Head and Shell . . . . . . . . . . . . . . . . . . . 316L Stainless Steel
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . Silicone
Surface Finish . . . . . . . . . . . . . . . . . . . . Internal: mechanical polish 32Ra
External: mechanical polish, EP option
Cartridge Configuration . . . . . . . . . . . . . Code 0 and 5, Code 7 option
Maximum Operating Pressure . . . . . . . 3–8 Round:145 psig @ 104˚F
12 Round: 130.5 psig @ 104˚F
Maximum Operating Temperature . . . . . 3–8 Round: 302˚F @ 108.75 psig
12 Round: 302˚F @ 101.50 psig
Part Number
Cartridge
ZHHP0N0320T
ZHHP0N0330T
ZHHP0N0520T
ZHHP0N0530T
ZHHP0N0820T
ZHHP0N0830T
ZHHP0N1220T
ZHHP0N1230T
No.
Length
3
3
5
5
8
8
12
12
20
30
20
30
20
30
20
30
Vessel Size
3 round
5 round
8 round
12 round
A (in)
B (in)
ZHHP 12 Round
C (in)
Dia.
X-port
Pipe Dia.
6.6
6.6
8.6
8.6
10.7
10.7
13.8
13.8
14.2
14.2
16.5
16.5
17.6
17.6
26.9
26.9
1–1/2"
1–1/2"
2"
2"
2"
2"
3"
3"
Tri-Clamp Size (in)
1-1/2"
2"
2"
3"
D (in)
Overall
Height
41.3
51.2
41.3
51.2
41.3
51.2
47.2
57.1
E (in)
Required
Clearance
21.3
31.1
21.3
31.1
21.3
31.1
21.3
31.1
Total
Volume
(L)
12.6
17.8
20
29.1
35.5
49.7
65
88
Total
Net
Weight (kg)
19.4
21.4
20
22
30
33
14.5
19
Flange Size (in)
1-1/4"
1-1/2"
1-1/2"
3"
Siemens
Water Technologies
BACK
51
316 Stainless Steel, Multi-Tube
Filter Housing
For Code F
This multi-tube cartridge filter housing is made of 316 stainless steel, and is
suited for general-purpose industrial and commercial filtration. These housings
can accommodate Code F (DOE) or Code 0 cartridges, and are available with 6,
12, and 21 tubes in 10, 20, 30, 40-inch lengths.
• Incorporates a flow baffle, which deflects incoming flow to prevent cartridge
erosion
• An air vent on the cover allows venting before start-up
• A swing bolt closure allows quick disassembly for cleaning and cartridge
replacement
6-ROUND DIMENSIONS
12- AND 21-ROUND DIMENSIONS
Siemens
Water Technologies
BACK
52
Filter Housing
Dimensions
(inches (cm)
Inlet/Outlet
6-round 10”
6-round 20”
6-round 30”
6-round 40”
12-round 30”
12-round 40”
21-round 30”
21-round 40”
2 NPTM (5.1)
2 NPTM (5.1)
2 NPTM (5.1)
2 NPTM (5.1)
3 flange (7.6)
3 flange (7.6)
4 flange (10.16)
4 flange (10.16)
Materials
Housing Dimensions
A
B
24 (61)
34 (86)
45 (114)
56 (142)
56 (142)
66 (168)
57 (145)
67 (170)
11.2 (28)
11.2 (28)
11.2 (28)
11.2 (28)
31 (79)
31 (79)
31 (79)
31 (79)
C
5.2 (13)
5.2 (13)
5.2 (13)
5.2 (13)
12 (30)
12 (30)
12 (30)
12 (30)
D
10.2 (26)
10.2 (26)
10.2 (26)
10.2 (26)
12 (30)
12 (30)
16 (41)
16 (41)
Flange Option
E
15 (38)
15 (38)
15 (38)
15 (38)
16.4 (42)
16.4 (42)
20.8 (53)
20.8 (53)
Max. Flow
Rate*/gpm (lpm)
30 (114)
60 (227)
90 (340)
120 (454)
180 (680)
240 (908)
315 (1190)
420 (1560)
Head, Shell, Plugs. . . 316L Stainless Steel
Internals. . . . . . . . . . . 316 Stainless Steel
Cover O-Ring. . . . . . . EDPM
Maximum Operating Pressure
6-Round. . . . . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)
12-Round. . . . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)
21-Round. . . . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)
Catalog Number
Description
Inlet/Outlet
ZHGOF0620
6-round 20"
2" NPT
ZHGOF0610
ZHGOF0630
ZHGOF0640
ZHGOF0610F
ZHGOF0620F
6-round 10"
2" NPT
6-round 30"
2" NPT
6-round 40"
2" NPT
6-round 20"
2" flange
6-round 10"
2" flange
ZHGOF0630F
6-round 30"
2" flange
ZHFFI1230
12-round 30"
3" flange
ZHGOF0640F
ZHFFI1240
ZHFFI2130
ZHFFI2140
B10020279
B10015430
6-round 40"
2" flange
12-round 40"
3" flange
21-round 40"
4" flange
21-round 30"
4" flange
Replacement O-ring EPDM 6-round
Replacement O-ring EPDM 12-round
*Housing rating only, cartridge length and type
will effect maximum flow rates
Siemens
Water Technologies
BACK
53
304 Stainless Steel, Multi-Tube Filter
Housing with V-Clamp Closure
For Code F
This multi-tube cartridge filter housing is made of durable 304 stainless steel, and is
suited for general-purpose industrial and commercial filtration. These housings can
accommodate Code F (DOE, internals provided), and can be configured for Code 0
and Code 5 cartridges.
• Incorporates a flow baffle, which deflects incoming flow to prevent cartridge erosion
• A 1/4" NPT air vent on the cover allows venting before start-up
• A 3/4" NPT drain plug allows for liquid removal
• Cartridges are independently sealed inside the housing and a single V-band clamp
housing closure allows easy cartridge replacement
• Cartridge post can be lifted out, allowing easy removal of cartridges at the bottom
of the stack
Cartridge
Inlet/Outlet
Housing Dimensions/Inches (cm)
Housing
Inches (cm)
A
B
C
D
5-round 10"
5-round 20"
5-round 30"
5-round 40"
Materials
1-1/2 NPTM (3.8)
1-1/2 NPTM (3.8)
2 NPTM (5.1)
2 NPTM (5.1)
25 (64)
32.5 (85)
44 (112)
54.5 (138)
Head, Shell, Plugs. . . . . . . . . . . . . . . . .
Internals. . . . . . . . . . . . . . . . . . . . . . . . .
Cover O-Ring. . . . . . . . . . . . . . . . . . . . .
Hold Down Plate Nut . . . . . . . . . . . . . . .
11.5 (29)
11.5 (29)
11.5 (29)
11.5 (29)
5.5 (14)
5.5 (14)
5.5 (14)
5.5 (14)
12 (30)
12 (30)
12 (30)
12 (30)
Flange Opt.
E
12.75 (32)
12.75 (32)
12.75 (32)
12.75 (32)
Max. Flow
Rate*/gpm (lpm)
25 (94.6)
50 (189)
75 (284)
100 (378)
304 Stainless Steel
316 Stainless Steel
Ethylene Propylene
Polypropylene
Maximum Operating Pressure. . . . . . . . 150 psi (10.7 bar) @ 200°F (93°C)
Maximum Housing Flow Rates* . . . . . . 100 gpm (378 lpm)
Catalog Number
Description
Inlet/Outlet
ZHFFI0520
1-1/2" NPT
ZHFFI0510
ZHFFI0530
5-round 10"
1-1/2" NPT
5-round 20"
5-round 30"
2" NPT
ZHFFI0540
5-round 40"
2" NPT
ZHFFI0520F
5-round 20"
1-1/2" Flange
ZHFFI0510F
5-round 10"
1-1/2" Flange
ZHFFI0530F
5-round 30"
B10016248
Spare Housing O-Ring
EPDM
ZHFFI0540F
2" Flange
5-round 40"
2" Flange
**Flange inlet and outlet are also available; add F Suffix to part number
Siemens
Water Technologies
BACK
54
Filter Housing with Swing Bolt Closure
For Code F
This multi-tube cartridge filter housing is made of 18 gauge 304 stainless steel.
Housings are available to accommodate 6, 10, 20, 30 or 40-in, Code F filter
cartridges. The inlet and outlet are 2" NPT. There is a 1/2" NPT drain plug, and a
1/4" NPT vent at the top of the housing. A swing bolt closure allows quick
disassembly for cleaning and service. This cartridge filter housing is ideal for a
wide variety of high flow applications that require an economical, high quality
housing.
• Uses 304 stainless steel construction for maximum corrosion resistance to deliver
years of dependable service
• A swing bolt closure allows quick disassembly for cleaning and service
• An air vent plug on the cover allows venting before start-up
• This housing accommodates liquid flow rates up to 180 gpm (681 lpm) with
operating pressures to 150 psig (10.3 bar)
Cartridge
Housing Dimensions/Inches (cm)
Housing
A
B
C
D
6-round 10"
6-round 20"
6-round 30"
6-round 40"
Materials
24 (61)
34 (86)
45 (114)
56 (142)
11.2 (28)
11.2 (28)
11.2 (28)
11.2 (28)
Head and Shell . . . . . . . . . . . . . . . . . . .
Vent and Drain Plug . . . . . . . . . . . . . . .
Seat Cups . . . . . . . . . . . . . . . . . . . . . . .
O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 (13)
5.2 (13)
5.2 (13)
5.2 (13)
10.2 (26)
10.2 (26)
10.2 (26)
10.2 (26)
Flange Opt.
E
15 (38)
15 (38)
15 (38)
15 (38)
Max. Flow
Rate*/gpm (lpm)
30 (114)
60 (227)
90 (340)
120 (454)
304 Stainless Steel
304 Stainless Steel
316L Stainless Steel
Ethylene Propylene
Maximum Operating Pressure . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)
Max Water Flow Rate*. . . . . . . . . . . . . . 120 gpm (454 Lpm)
Catalog Number
Description
Inlet/Outlet
ZHGAF0610
6-round 10"
ZHGAF0630
6-round 30"
2" NPT
ZHGAF0610F
6-round 10"
2" flange
ZHGAF0620
ZHGAF0640
ZHGAF0620F
ZHGAF0630F
ZHGAF0640F
B10020279
6-round 20"
6-round 40"
6-round 20"
6-round 30"
6-round 40"
2" NPT
2" NPT
2" NPT
2" flange
2" flange
2" flange
Spare Housing O-ring
Siemens
Water Technologies
BACK
55
Polypropylene Plastic Filter Housings
These filter housings are molded from polypropylene, and are available in 10 and 20
inch lengths. Housings are supplied with 3/4" inlet and outlets in standard flat gasket
design for Code F filter cartridges. Heads are available with double cap plug design
and Viton® o-rings.
• Durable housings are made from all polypropylene materials
• Housings contain no fillers, colorants, plasticizers, or lubricants
• Housings are autoclavable, ETO sterilizable, and hydrogen peroxide compatible
• Supplied with 3/4" NPT inlet and outlets in standard flat gasket design for Code F
filter cartridges
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5" ID, 5 1/8” OD maximum
polypropylene cap and housing with standard
Viton® E-60 o-rings
125 psi (8.6 bar)
100°F (38°C)
Maximum Operating Pressure . . . . . . . . . . . . . . . . . . . .
Maximum Operating Temperature . . . . . . . . . . . . . . . . .
Sterilization/Sanitization
Hydrogen Peroxide . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5% compatibility; static soak up to 24 hr at
ambient temperature
Weight
10" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 lb (1.4 kg)
4.25 lb (1.9 kg)
Housing Compatibility/Cartridge Type
ZHCFA1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZHCFA2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number:
ZHC
Code F, 9 3/4”
Code F, 20”
F
A
XX
Polypropylene
System Name. . . . . . . . . . . . . filter housing
Cartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = Code F
Cartridge Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A = No plugs
10 = 10
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 = 20
Number of Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To figure your order number, replace the X with one of the numbered options below it.
ACCESSORIES
Description
Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O-ring replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XX
01 = 1 tube
Catalog Number
ZHA150060
FC150295
ZHA151021
Siemens
Water Technologies
BACK
56
White Polypropylene Plastic Filter Housing
for Dialysis Filtration Applications
These filter housings are molded from a white colored, high-density polypropylene,
and are available in 12 and 20 inch lengths to accommodate 10 and 20 inch Code 0
filter cartridges. Housings are molded in dies that are minutely polished for an
ultra-smooth finish to all contact surfaces, thus minimizing the opportunity for
bacteria adhesion. Housings are supplied with 3/4" inlet and outlets. Heads are
available with double cap plug design and Viton® o-rings.
• Durable housings are made from all polypropylene materials with FDA approved
white colorant
• O-rings are molded of FDA approved Viton®
• Available in 222 o-ring design for Code 0 filter cartridges
• Housings are hydrogen peroxide compatible
• Supplied with 3/4" NPT inlet and outlets
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
White colored polypropylene cap and housing with
standard Viton® E-60 o-rings
100 psi (6.9 bar)
100˚ F (35˚C)
ambient temperature
Weight
12" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5 lb (1.6 kg)
4.25 lb (1.9 kg)
ZHW0D1201. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZHW0D2001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number:
ZHW
Code 0, 10"
Code 0, 20"
X
X
XX
White
polypropylene
Cartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 = Code 0
Housing Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D = Double cap plug
12 = 12
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 = 20
Number of Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To figure your order number, replace the X with one of the numbered/lettered options below it.
ACCESSORIES
Description
O-ring Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XX
01 = 1 tube
Catalog Number
ZHA150060
ZHA151117
Siemens
Water Technologies
BACK
57
Natural Polypropylene Plastic Filter
Housing
These filter housings are molded from natural, high-density polypropylene, and is
available in 10, 12 and 20 inch lengths. Housings are molded in dies that are minutely
polished for an ultra-smooth finish to all contact surfaces, thus minimizing the
opportunity for bacteria adhesion. Housings are supplied with 3/4" inlet and outlets in
standard flat gasket design for Code F filter cartridges, and 222 o-ring design for Code 0
filter cartridges. Heads are available with double cap plug design and Viton® o-rings.
• Durable housings are made from all polypropylene materials (except for o-rings)
• Housings contain no fillers, colorants, plasticizers, or lubricants
• Available in flat gasket design for Code F filter cartridges, and 222 o-ring design for
Code 0 filter cartridges
• Housings are autoclavable and hydrogen peroxide compatible
• Supplied with 3/4" NPT inlet and outlets
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Natural polypropylene cap and housing with
standard Viton® E-60 o-rings
100 psi
38° C (100°F)
Autoclavable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25 min 121-127°C (252-260°F)
ambient temperature
Weight
10" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 lb (1.4 kg)
3.5 lb (1.6 kg)
4.25 lb (1.9 kg)
ZHA0D1201* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZHA0D2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZHAFD1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZHAFD2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Code 0, 10"
Code 0, 20"
Code F, 9 3/4"
Code F, 20"
*Code 0, 10" cartridge must be used with 12" housing
*Code 0 cartridge requires 12" housing
Catalog Number:
ZHA
X
X
XX
Natural
polypropylene
F = Code F
Cartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 = Code 0
10 = 10
Housing Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D = Double cap plug
12 = 12
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 = 20
Number of Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To figure your order number, replace the X with one of the numbered/lettered options below it.
XX
01 = 1 tube
*Code 0 cartridge requires 12" housing
ACCESSORIES
Description
O-ring Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BACK
Catalog Number
ZHA150060
ZHA151117
Siemens
Water Technologies
58
CARTRIDGE FILTER - SPECIALTY CARTRIDGE
CLERIFY™ Oil Adsorption Filter Cartridge
•
Composed of sheets of modified cellulose material rolled on a central
polypropylene support core
•
Removes 95% of total hydrocarbons from water in a single pass. The media
can adsorb up to 300% of its own weight in oils
•
Available in 2.75" and 4.6" diameters and lengths to 40"
CARTRIDGE SPECIFICATIONS
Dimensions
Diameter (OD) . . . . . . . . . . . . . . . . . .
Length
...................
2.75" (7.0 cm ) or 4.5" (11.7 cm )
9.75", 10", 20", 30", 40”
Materials
Media
.....................
Core . . . . . . . . . . . . . . . . . . . . . . . . . .
Gaskets . . . . . . . . . . . . . . . . . . . . .
Modified Cellulose
Polypropylene
Buna N
Max. Temperature
............
Max. Differential Pressure . . . . . . . .
120° F (50° C)
36 psi (2.5 bar) @ 25°C
2.75" Diameter . . . . . . . . . . . . . . . . .
4.60" Diameter . . . . . . . . . . . . . . . .
5.0 gpm/10" Length (18.9 lpm/10" Length)
5.0 gpm/10" Length (18.9 lpm/10" Length)
Catalog Number:
HAC
Hydrocarbon Adsorption Cartridge .
HAC
X
X
XX
X
X
09 = 9.75
A = 2.75"
0 = 2-222 O-Rings
10 = 10
Cartridge Diameter . . . . . . . . . . . . . . . . . . . .
B = 4.5"
F = Double open end
20 = 20
Cartridge Code
................................
w/flat gasket seals
30 = 30
Length (inches)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 = 40
Core Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P = Polypropylene
Gasket Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B = Buna N
Siemens
Water Technologies
BACK
59
CARTRIDGE FILTER - VENT FILTER
Hydrophobic PTFE Media
Vent Capsule Filter
• Composed of a pleated hydrophobic PTFE filter membrane rated at 0.01 µm
absolute for small volume storage tank venting applications
• Convenient threaded inlet, with 1/2" NPTM inlet fitting screws into 1/2" NPTF
bulkhead fitting, eliminates the need for a filter housing
• Hydrophobic expanded PTFE membranes are fully validated by bacterial
challenge test methods
• Filters feature thermally-bonded polypropylene cage without using adhesives to
ensure low extractables
• 100% integrity tested in manufacturing and can be repeatedly autoclaved with
steam up to 140°C
Dimensions
Diameter (OD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length (in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inner Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.48" (5.6 cm)
5.9 (15 cm)
1/2" NPTM
Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Polypropylene
PTFE Membrane
Maximum Temperature . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Differential Pressure @ 80°C (176˚F) . . . .
Air Filtration Rating . . . . . . . . . . . . . . . . . . . . . . . . . . .
60˚C (140˚F)
65 psig (4.5 bar)
0.01 µm 100% Absolute
Materials
FCVPTO6S1
Capsule Hydrophobic PTFE Filter
NOTE: These filter cartridges should not be used as a combination air vent/water overflow device.
Siemens
Water Technologies
BACK
60
EA Series Hydrophobic Polypropylene
Media Vent Filter Cartridge
• Composed of a pleated hydrophobic highly asymmetric polysulfone membrane
rated at 0.02 µm absolute for sterile air filtration, storage tank venting applications
• Filter components meet current USP Class VI biological test for plastics
• Contain no surfactants or coatings to interfere with your application, and the
thermo-plastic construction process minimizes extractables
• Asymmetric single layer membrane ensures strength, while exhibiting low pressure
drop and exceptionally high flow rates
• Sterilized by autoclaving
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.6" (6.6 cm)
10, 20, 30
Cartridge . . . . . . . . . . . .
Media . . . . . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Hydrophobic asymmetric polysulfone
Air Filtration Rating . . . . . . . . . . . . . . . .
Toxicity. . . . . . . . . . . . . . . . . . . . . . . . . .
Sanitizing Agents
..............................
Ambient Air
60 psi (4.1 bar)
0.02 µm 100% Absolute
Materials
Chlorine, hydrogen peroxide or autoclaving
FCEA . . . . . . . . . . . . . . Filter cartridge vent polysulfone
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30
S2 . . . . . . . . . . . . . . . . . Micron Rating: S2 = 0.02 µm (air)
To figure your order number, replace the X with one of the numbered or lettered options beside it. Note: Not all
part number combinations are available; consult Technical Support for assistance.
Siemens
Water Technologies
BACK
61
VA Series Hydrophobic PTFE Validated
Membrane Vent Filter Cartridge
• Hydrophobic, pleated PTFE membrane rated at 0.2µm absolute for sterile air filtration
• Materials of construction conform to USP Class VI biological tests for plastics
• High surface area and high voids volume combine to offer exceptional flow rates and
extended service life
• Fully validated by aerosol and liquid bacterial challenge
• Filters are integrity testable by all methods including Water Intrusion Test
• FCVA Series is fully retentive to aerosolized Brevundimonas diminuta (ATCC 19146)
bacteria when challenged with a total of 2x109 cfu over a 1-hr test at the rated flow
of the cartridge.
• Conformance to the requirements for the non-fibre releasing filters as laid down in
the U.S. Food and Drug Administration Regulations 12CFR211.72 and 210.3(b), (6).
Dimensions
Diameter (OD). . . . . . . .
Length (in). . . . . . . . . . .
2.6
5, 10, 20, 30
Cartridge . . . . . . . . . . . .
Membrane. . . . . . . . . . .
Seals . . . . . . . . . . . . . . .
Hydrophobic PTFE
Silicone o-rings
Air Filtration Rating . . . . . . . . . . . . . . . .
Toxicity. . . . . . . . . . . . . . . . . . . . . . . . . .
50˚ C
50 psig
0.02 µm Absolute
All components conform to the Biological Safety Standards
identified in USP <88> Biological Reactivity to Class VI-121˚C levels
ASTM F838-83 Liquid Bacterial Challenge
Fully retentive to both Aerosol Bacteria and Phage Challenge
Materials
Validation . . . . . . . . . . . . . . . . . . . . . . . .
Sanitizing Agents
Sterilization . . . . . . . . . . . . . . . . . . . . . .
...................
Can be insitu steam sterilized up to 180 times at 142˚C
Micron Rating . . . . . . . .
Minimum Bubble Point (psi)
Pressure Decay Test Pressure (psi)
Maximum Diffusional Flow (ml/min)
0.2 µm liquid rating
14.5
11.6
8.5, 18, 36, 54
Integrity Test @ 20˚C
FCVA. . . . . . . . . . . . . . . Filter Cartridge Vent PTFE
XX . . . . . . . . . . . . . . . . . Length (in): 05 = 5, 10 = 10, 20 = 20, 30 = 30
To figure your order number, replace the X with one of the numbered or lettered options beside it.
NOTE: Not all part number combinations are available; consult Technical Support for assistance.
Siemens
Water Technologies
BACK
62
VP Series Hydrophobic PTFE Validated
Media Vent Filter Cartridge
• Composed of a pleated, hydrophobic, PTFE, Teflon® membrane rated at 0.2 µm
absolute for sterile air filtration, storage tank venting applications
• Filter components meet the criteria of the USP Class VI biological test for plastics
• These filters feature minimal pressure loss, long service life due to high void
volume, and can be repeatedly steam sterilized or autoclaved
• Bacterial Growthrough - Prevention of bacterial grownthrough by Brevundimonas
diminuta for at least 21 days @ a challenge level ≥ 1 x 107 CFU/cm2
Dimensions
Diameter (OD)
Length (in)
................
................
2.6" (6.6 cm)
10, 20, 30
Cartridge
Media
Seals
................
................
................
Hydrophobic Teflon® PTFE
Materials
Maximum Temperature . . . . . . . . . . . . . . . .
Maximum Differential Pressure @ 21°C . .
Air Filtration Rating
................
Toxicity
................
Virus Aerosol Retention . . . . . . . . . . . . . . .
Sanitizing Agents
Integrity Test
................
................
Bubble point @ 23˚C . . . . . . . . . . . . . . . .
Nitrogen Diffusion @ 23˚C . . . . . . . . . . . . .
Ambient Air
72 psi (5.0 bar)
0.2 µm Absolute
Retention of a worst case challenge of the model
bacteriophage Φ X–174 was complete at challenge
levels at 108 to 1010 virus particles at 1400 sL/min
(50scfm) after 50 steam sterilization cycles of 30 minutes
at 145˚C.
Chlorine, hydrogen peroxide, autoclaved for 20 minutes
at 121°C under no load conditions.
≥ 13 psig (≥ 900 mbar) nitrogen with 60/40% IPA/Water
≥ 45 mL/min @ 690 mbar (10 psig) in 60/40% IPA/Water
FCVP . . . . . . . . . . . . . . Filter cartridge vent polysulfone
XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30
To figure your order number, replace the X with one of the numbered or lettered options beside it. Note: Not all part
number combinations are available; consult Technical Support for assistance.
Siemens
Water Technologies
BACK
63
CHEMICAL FEED SYSTEMS AND ACCESSORIES
Antiscalant, Coagulants, Dechlorination,
Chlorination, Cleaner and Disinfectants
Siemens offers pretreatment chemical addition products to maintain the
performance of Reverse Osmosis (RO) systems, inhibiting fouling and scaling of RO
membranes. Siemens Technical Specialists can assist you in choosing the proper
product and applying these products correctly. Pretreatment chemical addition can
be a cost-effective alternative to other methods of controlling feedwater
chemistry.
Antiscalants/Antifoulants prevent scaling of RO membranes, as well as reduce the
rate of colloidal fouling, including hardness and silica.
Coagulants injected before multimedia filters and directly into clarifiers to improve
filtration of silt, turbidity, particulate matter and colloids.
Dechlorination chemicals include sodium sulfite, sodium bisulfite, or sodium
metabisulfite to remove chlorine prior to reverse osmosis systems.
Chlorination kills and controls bacteria in pretreatment systems.
Cleaner chemicals with either low or high pH properties remove ionic and organic
foulants in the RO membrane.
Disinfectant chemicals, such as peroxyacetic acid and hydrogen peroxide
formulations, are used to sanitize the reverse osmosis systems.
Standard Chemical Feed System: Pre-kitted
Chemical feed systems are pre-kitted units with ratings of 1, 2, 4 or 5 gph, and
consist of a metering pump, a storage tank with a liquid level switch and suction
tube shield.
• Available with or without a flow pulsar.
• A flowmeter pulsar is optionally available.
Pump head . . . . . . . . .
Fittings . . . . . . . . . . . . .
Valve Balls . . . . . . . . . .
Liquifram . . . . . . . . . . .
Seal Rings . . . . . . . . . .
Connections. . . . . . . . .
Output . . . . . . . . . . . . .
Tank . . . . . . . . . . . . . . .
Tank Size (gallons) . . .
Liquid Level Switch . . .
Flow Meter Pulsar . . . .
Electrical . . . . . . . . . . .
PVC
Polypropylene
Ceramic
Teflon® face
Teflon®
Liquid end no. 72S–0.5" tube
Liquid end no. 92S–0.375" tube
100 psi
Polyethylene
35 for 1 gph, 50 for 2.5 and 4 gph
Polypropylene housing; PVC float tube;
polypropylene float
Body–bronze; Rotor–polypropylene
115 V/60 Hz
Catalog No.
ZWCF40000
ZWCF400FM
ZWCF25000
ZWCF250FM
ZWCF10000
ZWCF100FM
Description
4 gph chemical feed system w/outflow meter
4 gph chemical feed system w/flow meter
2.5 gph chemical feed system w/outflow meter
2.5 gph chemical feed system w/flow meter
1.0 gph chemical feed system w/outflow meter
1.0 gph chemical feed system w/flow meter
Contact Technical Support at (800) 875-7873 ext. 5000 for assistance in sizing your system, choosing the proper chemical and determining the quantity of chemical required.
Siemens
Water Technologies
BACK
64
CHEMICAL FEED SYSTEMS AND ACCESSORIES - CHEMICAL FEED SYSTEMS
Standard ChemFeed Systems:
Grundfos® Pumps
Siemens offers standard dual-pump feed systems covering common chemical
applications. The table below lists chemicals and pump configurations available
for Grundfos® Electronic Metering Pumps. All chemical feed skids are completely
assembled and engineered for easy installation and operation.
Ordering Information
Catalog #
Model #
Description
Capacity
SP10701904
GR-16-100-C-V
15.84 GPD
SP10701999
GR-48-100-C-E
Two pump skid with common inlet/discharge.
100ml Calibration Cylinder
250ml Calibration Cylinder * w/ Diaphragm Valves
and Auto-Vent for Hypo
SP10701987
SP10701997
SP10701907
GR-48-100-C-V
GR-118-250-C-V
GR-118-250-C-V-D
47.52 GPD
47.52 GPD
117.6 GPD
117.6 GPD
Material of
Construction
CPVC / Viton®
CPVC/ Viton®
CPVC/EPDM
CPVC/ Viton®
CPVC/ Viton®
Siemens
Water Technologies
BACK
Standard ChemFeed Systems: LMI® Pumps
Siemens offers standard dual-pump feed systems covering common chemical
applications. The table below lists chemicals and pump configurations available
using LMI® Electronic Metering Pumps. All chemical feed skids are completely
assembled and engineered for easy installation and operation.
System Specifications
Chemical
Catalog #
Output / PSI
Pump Head
Sodium
Bisulfite
SB-10-100
SB-24-100
SB-60-250
SB-96-500
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
SH-10-100
SH-10-100
SH-60-250
SH-96-500
Connections
Output
Control
Electrical
Skid
Sodium Bisulfite: PVDF /TFE
Polymer: PP/TFE
Bleach:PVDF/TFE
Alum: PVDF/TFE
Potassium Permanganate: PVDF/TFE
Caustic: PVDF/TFE
Hydrochloric Acid: PVDF/TFE
Sulfuric Acid: PVDF/TFE
Anti-Scalant: PVDF/TFE
1/2" CPVC
10,GPD / 140PSI
24GPD / 110PSI
60GPD / 100PSI
96GPD / 100PSI
Polymer
Bleach
Alum
Manual or 4-20 mA
120VAC / 60Hz / 1Ph
Potassium
Permanganate
24" x 36" PE Base
Caustic
Hydrochloric Acid
Sulfuric Acid
Anti-Scalant
POLY-10-100
POLY-24-100
POLY-60-250
POLY-96-500
AL-10-100
AL-24-100
AL-60-250
AL-96-500
PP-10-100
PP-24-100
PP-60-250
PP-96-500
CAU-10-100
CAU-24-100
CAU-60-250
CAU-96-500
HCA-10-100
HCA-24-100
HCA-60-250
HCA-96-500
SA-10-100
SA-24-100
SA-60-250
SA-96-500
AS-10-100
AS-24-100
AS-60-250
AS-96-500
Spare LMI
Pump
Catalog #
Spare
Parts
Catalog #
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
SP-SB-10
SP-SB-24
SP-SB-60
SP-SB-96
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353HI
AA951-393HI
B921-393HI
C921-363HI
SP-SH-10
SP-SH-24
SP-SH-60
SP-SH-96
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-155HV
AA951-85HV
B921-85HV
C921-75HV
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
10 GPD / 140 PSI
24 GPD / 110 PSI
60 GPD / 100 PSI
96 GPD / 100 PSI
AA971-353SI
AA951-393SI
B921-393SI
C921-363SI
SP-POLY-10
SP-POLY-24
SP-POLY-60
SP-POLY-96
SP-AL-10
SP-AL-24
SP-AL-60
SP-AL-96
SP-PP-10
SP-PP-24
SP-PP-60
SP-PP-96
SP-CAU-10
SP-CAU-24
SP-CAU-60
SP-CAU-96
SP-HCA-10
SP-HCA-24
SP-HCA-60
SP-HCA-96
SP-SA-10
SP-SA-24
SP-SA-60
SP-SA-96
SP-AS-10
SP-AS-24
SP-AS-60
SP-AS-96
Spare Parts Kits include (1) Calibration Cylinder, (1) Ball Valve, (1) Pump Spare Parts Kit (Seals, Springs, Ball Checks & Diaphragm).
LMI = Liquid Metronics, Inc.
Siemens
Water Technologies
BACK
65
66
Polymer Feed Systems
PolyBlend® PB polymer feed systems provide optimum polymer activation and
performance. The PB Series PolyBlend® systems are economical and easy to
install and operate. The patent technology and offer proven performance make
the PolyBlend® the benchmark in the industry.
PolyBlend® PB Series Polymer Feed Systems
Catalog #
Water Flow
Diaphragm Pump
Rate GPH
Output GPH
PB16-0.4
16
0.4
PB100-1.0
100
1.0
PB200-2.0
200
2.0
At the center of the PolyBlend® PB Series
polymer feed system is the patented multizone mixing chamber. The advanced design
provides uniform dispersion energy at the
moment of initial wetting. The high-energy
mix prevents agglomerations and eliminates
the need for extended mixing and aging by
applying the right energy at the right time.
The low energy zone continues to activate
the hydrated polymer without destroying
the fragile polymer chains. The result is
maximum polymer activation and improved
polymer performance.
EZ ChemFeed Systems
Siemens offers a variety of chemical feed and control systems to meet the
requirements of harsh industrial applications. From simple EZ Series pump skids and
accessories to complex systems, Siemens has the ChemFeed solution for your water
treatment needs.
Standard EZ Chemical Feed Systems & Accessories
Catalog #
Model #
Description
CFSEZ1
EZ-1 Pump System The EZ1 Pumps System is a skid-mounted chemical metering system designed for maximum reliability and
convenience. The EZ1 package utilizes LMI® pumps providing a broad range of capabilities EZ1 Systems are typically used in
water treatment programs to dose proper amounts of inhibitors, dispersants, biocides, as well as pH control chemicals and
oxidants. The system comes complete and ready for service upon delivery
CFSEZ2
EZ-2 Pump System The EZ2 Dual Pump Skid System is a skid-mounted chemical metering system designed to feed either one or two chemicals
together or separately. The EZ2 package utilizes LMI® pumps providing a broad range of capacities and flexibility to handle a
wide range of applications. EZ2 Systems are typically used in water treatment programs to dose proper amounts of inhibitors,
dispersants, biocides, as well as pH control chemical and oxidants.
CFSEZENCLOSURE
EZ -Enclosure
The EZ Enclosure is a high-quality NEMA 12 fiberglass enclosure, which is ideal for a number of chemical treatment applications.
These units are used for dual biocide applications where containment is important.
CFSDRUMSHELF
EZ- Drum Shelf
The EZ Drum Shelf is designed to secure a metering pump atop a metal or plastic 55-gallon drum. The unit, constructed of 1/2
inch PVC, prevents pumps from tipping over.
Siemens
Water Technologies
BACK
CHEMICAL FEED SYSTEMS AND ACCESSORIES - METERING PUMPS
Chem-Tech® Chemical Metering Pumps
The Chem-Tech® pump combines proven degassing technology with the
durability and dependability that has earned Chem-Tech® pumps the respect of
water treatment professionals around the world. The result is a series of positive
displacement diaphragm metering pumps that are totally self-priming and
maintain their prime even in the most demanding water conditioning and water
treatment applications.
Chem-Tech Prime Performance™ Pumps
Catalog #
X015-XA-BAA8XXX
X015-XA-BBA8XXX
X024-XA-BAA8XXX
X024-XA-BBA8XXX
X030-XA-BAA8XXX
X030-XA-BBA8XXX
Catalog #
Series CTP-A Simplex (Peristaltic Pumps)
CTPA2HSA-PAP1-XXXXX
CTPA2LSA-PAP1-XXXXX
CTPA3HSA-PAP1-XXXXX
CTPA3LSA-PAP1-XXXXX
CTPA4HSA-PAP1-XXXXX
CTPA4LSA-PAP1-XXXXX
CTPA6LSA-PAP1-XXXXX
CTPA6HSA-PAP1-XXXXX
Series CTP-A Duplex (Peristaltic Pumps)
CTPB2LSA-PAP1-XXXXX
CTPB3LSA-PAP1-XXXXX
CTPB4LSA-PAP1-XXXXX
CTPB6LSA-PAP1-XXXXX
Series CTP-AE Simplex (Peristaltic Pumps)
CTPA2HEA-PAP1-XXXXX
CTPA2LEA-PAP1-XXXXX
CTPA3HEA-PAP1-XXXXX
CTPA3LEA-PAP1-XXXXX
CTPA4HEA-PAP1-XXXXX
CTPA4LEA-PAP1-XXXXX
CTPA6LEA-PAP1-XXXXX
CTPA6HEA-PAP1-XXXXX
Series CTP-AE Duplex (Peristaltic Pumps)
CTPB2LEA-PAP1-XXXXX
CTPB3LEA-PAP1-XXXXX
CTPB4LEA-PAP1-XXXXX
CTPB6LEA-PAP1-XXXXX
Series CTP-D Simplex (Peristaltic Pumps)
CTPD2HSA-PAP1-XXXXX
CTPD3HSA-PAP1-XXXXX
CTPD4HSA-PAP1-XXXXX
CTPD6HSA-PAP1-XXXXX
Series CTP-D Duplex (Peristaltic Pumps)
CTPE2HSA-PAP1-XXXXX
CTPE3HSA-PAP1-XXXXX
CTPE4HSA-PAP1-XXXXX
CTPE6HSA-PAP1-XXXXX
GPH
15
15
24
24
30
30
PSI
100
100
100
100
100
100
Head & Fittings
PSI
Tubing
3.5
3.5
8
8
13
13
30
30
125
80
110
70
100
50
40
80
Norprene
Norprene
Norprene
Norprene
Norprene
Norprene
Norprene
Norprene
GPH
7
16
26
60
3.5
3.5
8
8
13
13
30
30
80
70
50
40
125
80
110
70
100
50
40
80
PVC / Hypalon
PVC / Viton
PVC / Hypalon
PVC / Viton
PVC / Hypalon
PVC / Viton
Norprene
Norprene
Norprene
Norprene
Norprene
Norprene
Norprene
Norprene
80
70
50
40
Norprene
Norprene
Norprene
Norprene
14
32
52
120
125
110
100
80
Norprene
Norprene
Norprene
Norprene
*Standard Duplex models are of like pressure and flow rate
125
110
100
80
KX100-BAA8
KX100-BBA8
KX100-BAA8
KX100-BBA8
KX100-BAA8
KX100-BBA8
Norprene
Norprene
Norprene
Norprene
7
16
26
60
7
16
26
60
KOP Kit Catalog #
Norprene
Norprene
Norprene
Norprene
Peristaltic Tubing Option. - FLURAN® Severe Environment Tubing
The tubing option is the sixth position in the model number, which is coded as “H” or “L” in the
standard CTP models. Standard tubing on all models is norprene. The FLURAN tubing option
is not available on CTP-A/AE duplex models or on models with a max flow rate greater than
24 GPD. Max pressure rating with FLURAN tubing is 60 PSl. When ordering FLURAN tubing,
replace the “L” or “H” in the model number with “F”.
Pos. 5&6
CTP-A/AE Models
CTP-D Models
2F
3 GPD
7 GPD
3F
8 GPD
16 GPD
4F
13 GPD
26 GPD
BACK
Chem-Tech Prime Performance™ Pumps
The new Chem-Tech Prime Performance™ pump combines
Pulsafeeder’s proven degassing technology with the
durability and dependability that has earned Chem-Tech®
pumps the respect of water treatment professionals around
the world. The result is a series of positive displacement
diaphragm metering pumps that are totally self priming and
maintain their prime even in the most demanding water
conditioning and water treatment applications. Pump sizes
are 15, 24, or 30 GPD @ 100 PSI and driven by 115VAC
motors.
Series CTP (Peristaltic Pumps)
The Series CTP offers a bold new look in reliability and
value and is available in three control options offering feed
rates up to 60 GPD (9.5L PH) with pressures to 125 PSI
( 8.6bar).
The Series CTP-A includes a percentage dial for reliable
operation and adjustable feed rates in 5-second increments.
The Series CTP AE is a 100% fixed rate economy model
with an off-on dial for applications requiring constant feed
and easy use.
Both Series CTP-A and Series CTP-AE models are available
with optional 7-day timers for biocide feed or other timed
applications.
For applications requiring precise feed rates, the Series
CTP-D offers digital control from 10% to 100% up to 60 GPD
(9.5LPH). Adjustable in 1% increments, the Series CTP-D
provides maximum control for demanding applications.
Simplex and duplex head configurations are both available.
Control Options
The control option is the seventh position in the model number, which is coded as
an “S” in the standard Series CTP-A / CTP-D and as “E” in the standard Series
CTP-AE. When ordering one of the following options, replace the “S” or “E” with the
appropriate control option code listed below.
Position 7
Description
T
7 Day Mechanical Timer (2 hr. increments) with Series CTP-A
R
7 Day Mechanical Timer (2 hr. increments) with Series CTP-AE
D
7 Day – 8 Event Electronic Timer (1 min. increments) with
Series CTP-A / CTP-D
C
7 Day – 8 Event Electronic Timer (1 min. increments) with
Series CTP-AE
Siemens
Water Technologies
67
68
LMI® Series Chemical Metering Pumps
Series A, B and C LMI® Chemical Metering Pumps have been an industry
standard for over 20 years. The familiar yellow and black pumps have a rugged,
totally enclosed, chemically resistant housing for protection in the harshest
environments. Encapsulated electronics and a rigid housing and stroke bracket
ensure years of precise, repeatable performance.
The Series P Metering Pump is designed for more economical chemical injection.
The totally enclosed, chemically resistant housing and encapsulated electronics
provide the performance and long life. Dual manual control of stroke speed and
length and fixed speed versions are available for simple manual or on/off control.
A Series
B Series
C Series
P Series
NOTE:
Catalog #
GPH
PSI
Head & Fittings
AA141-155S
AA151-95S
AA151-392SI
AA161-362SI
AA171-352SI
AA741-352SI
AA751-392SI
AA771-352SI
AA941-352SI
AA951-392SI
AA971-352SI
.58
1
1
2
.42
.42
1
.42
.58
1
.42
250
110
110
50
140
140
110
140
250
110
140
PP
PP
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
B111-392SI
B121-393SI
B721-490SI
B911-398SI
B921-393BI
C101-94S
C111-75S
C121-362BI
C131-313BI
C141-35T
C701-94S
C731-20S
C771-20S
C911-363BI
C921-363BI
C931-313SI
P021-352BI
P121-352SI
P131-392SI
P141-352SI
P151-392BI
P161-362BI
P741-352BI
P751-392BI
P761-362BI
1.6
2.5
2.5
1.6
2.5
150
100
100
150
100
1.3
2.5
4
8
20
1.3
8
10
2.5
4
8
300
150
100
60
25
300
60
80
150
100
60
.21
.21
.42
.58
1
2
.58
1
2
150
150
110
250
110
50
250
110
50
S and SI suffix indicate 4-Function Valve
BI suffix indicate Bleed Valve
*Please contact Technical Support for additional pump selections
Siemens
Water Technologies
BACK
PVDF/PVDF
PVDF/PVDF
Acrylic/PVC
PVC/PVC
PVDF/PVDF
PVC/PVC
PP
PVDF/PVDF
PVDF/PVDF
PP
PVC/PVC
Acrylic/PVC
Acrylic/PVC
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
PVDF/PVDF
Repair Kit Part Catalog #
SP-U9
SP-U1
RPM-392
RPM-362
RPM-352
RPM-352
RPM-392
RPM-352
RPM-352
RPM-392
RPM-352
RPM-392
RPM-393
RPM-490
RPM-398
RPM-393
SP-U1
SP-U2
RPM-362
RPM-313
SP-U6
SP-U1
SP-20
SP-20
RPM-363
RPM-363
RPM-313
RPM-352
RPM-352
RPM-392
RPM-352
RPM-392
RPM-362
RPM-352
RPM-392
RPM-362
Control Options:
Type “9” control is designed for easy
integration into chemical feed systems.
The stroke rate may be controlled
manually or by an external signal
generated by a flowmeter, controller,
transmitter, PLC or other device. Divide
or multiply a digital (pulse) input or
program a response to a milliamp (4-20,
0-20, 20-4, 20-0) input. The optional DigiPulse Flow Monitor verifies chemical flow
and provides an alarm output.
Type “7” control is designed for more
economical systems. The stroke rate may
be controlled manually or by a digital
input. The optional Micropace Control
Modules enable the user to divide or
multiply a digital input or respond directly
and proportionally to a 4 - 20 milliamp
input.
Type “1” control is designed for accurate
chemical feed where manual or on/off
control is all that is required. Dual manual
control of stroke speed and stroke length
is provided.
LMI Part # System example: AA151-392SI
AA= Pump Series
1= Control Code
5= Output Code
1= Voltage Code
3= LiquiPro Series
9= Head Size
2= Material
S= Valve Code
I= Tubing Code
PULSAtron® Chemical Metering Pumps
Siemens offers a vide variety of PULSAtron® metering pumps. After more than 10
years of product evolution, the PULSAtron® standard continues to set the pace
with the recent introduction of the DG/5FV degas valve. PULSAtron® pumps can
successfully handle a variety of gaseous solutions previously relegated to other
metering technologies. The Pulsatron® family consists of six unique Series with
76 flow and pressure ranges to choose. Most models include our standard Bleed
Valve assembly, foot strainer, injection valve and tubing. No matter what your
application, choose the PULSAtron® metering pump that is right for you.
Series MP
Series E Plus
Series E
Series A Plus
Series C Plus
Series C
Catalog #
LMK2TA-KTC1-500
LMB2TA-KTC1-500
LMD3TA-KTC1-500
LMF4TA-KTC1-500
LMH4TA-KTC1-500
GPH
3
5
11
20
40
PSI
Head & Fittings KOP Kit Catalog #
300
250
250
250
250
PVDF
PVDF
PVDF
PVDF
PVDF
K2KTC1
K2KTC1
K3KTC1
K4KTC1
K4KTC1
LPA2SA-KTC1
LPB3SA-KTC1
LPD4SA-KTC1
LPG4SA-KTC1
LPH5SA-KTC3
LPH6SA-KTC3
LPH7SA-KTC3
LPH8SA-WTCB
6
12
21
42
75
120
240
500
150
150
150
150
150
100
35
20
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
K2KTC1
K3KTC1
K4KTC1
K4KTC1
K5KTC3
K6KTC3
K7KTC3
K8WTCB
LB02SA-VTC1
LB03SA-VTC1
LB04SA-VTC1
LB64SA-VTC1
6
12
22
30
150
150
100
100
PVC
PVC
PVC
PVC
K2VTC1
K3VTC1
K4VTC1
K4VTC1
LPB2SA-KTC1
LPD3SA-KTC1
LPF4SA-KTC1
LPH4SA-KTC1
LD02SA-VTC1
LD03SA-VTC1
LD04SA-VTC1
LD54SA-VTC1
LC02SA-VTC1
LC03SA-VTC1
LC04SA-VTC1
LC54SA-VTC1
5
11
20
40
6
12
22
30
6
12
22
30
250
250
250
250
80
80
80
80
80
80
80
80
PVDF
PVDF
PVDF
PVDF
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
K2KTC1
K3KTC1
K4KTC1
K4KTC1
K2VTC1
K3VTC1
K4VTC1
K4VTC1
K2VTC1
K3VTC1
K4VTC1
K4VTC1
Series MP
The Series MP is a true microprocessor controlled instrument for
precise and accurate metering control. Series MP include
automatic control via 4-20mA or 20-4mA inputs, external pace with
stop feature and 16-character LCD display.
Series E Plus
The Series E Plus offers manual control over stroke length and
stroke rate as standard with the option to choose between 4-20mA
or external pace inputs for automatic control.
Series E
The Series E offers manual function controls over stroke length
and stroke rate providing a turn down ratio 100:1.
Series A Plus
The Series A Plus offers manual control over stroke length and
stroke rate as standard with the option to select external pace for
automatic control.
Series C Plus
Like the Series A Plus, the Series C Plus offers manual control
over stroke length and stroke rate as standard with the option to
select external pace for automatic control.
Series C
The Series C offers manual on-line stroke length adjustment with
fixed stroke rate. Optional control features include external pace a
choice between momentary on/off switch for priming the pump or
a toggle on/off switch for manual override of all control functions.
NOTE: The -500 indicate 5-Function Bleed Valve
*Please contact Technical Support for additional pump selections
Siemens
Water Technologies
BACK
69
70
PULSAtron® Plus Chemical Metering Pumps
Water treatment professionals are under constant pressure to understand new
chemical treatment programs. While some applications require sophisticated
control systems with multi-parameter inputs and outputs, many installations can
be satisfied with a simpler approach. The PULSAtron® Plus is the ideal choice
when basic control is all that is required.
PULSAtron® Plus is a unique family of products that combine basic control
functions into a PULSAtron® pump, eliminating the need for separate pieces of
equipment. Available across a full range of pump capacities and pressure ratings,
each member of the PULSAtron® Plus family incorporates a variety of control
features that target specific applications.
Series CW
Series CL
Series WT
Series T7
Series ET
Catalog #
GPH
PSI
Head & Fittings
Description
LWO2RAVHC12XXXX
LWO3RAVHC12XXXX
LWO4RAVHC12XXXX
LW64RAVHCI2XXXX
.25
.5
1
1.25
150
150
100
100
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
LLO2RAVHCT2XXXX
LLO3RAVHCI2XXXX
LLO4RAVHC12XXXX
LL64RAVHC12XXXX
.25
.5
1
1.25
150
150
100
100
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
Rising Set Point,
ll5V, .25” ID
Tubing, SS
Sensor w/ 8.5’
Cable, No Flow
Switch
LQ02XAVHClXXXXX
LQ03XAVHCTXXXXX
LQ04XAVHCIXXXXX
LQ64XAVHClXXXXX
.25
.5
1
1.25
150
150
100
100
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
LTB2SAVHCTXXX
LTF4SAVHCIXXX
LTH4SAVHCIXXX
LTA2SAVHC1XXX
LTB3SAVHClXXX
LTD4SAVHClXXX
LTG4SAVHClXXX
LTHSSAVHC1XXX
LTA3SAVHC1XXX
LTB4SAVHC1XXX
LTE4SAVHC1XXX
LTH6SAVHC1XXX
LTH7SAVHCIXXX
LTH8SAVHClXXX
.21
.85
1.70
.25
.50
.90
1.75
3.15
.50
1
1.85
5
10
21
250
250
250
150
150
150
150
150
100
100
100
100
35
20
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
LCl3BAVHClXXX
LCl4BAVHCTXXX
LC64BAVHC1XXX
LC44BAVHClXXX
.5
1
1.25
2
100
100
100
50
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
PVC/Hypalon
Rising Set Point,
ll5V, .25” ID
Tubing, SS
Sensor w/ 8.5’
Cable, No Flow
Switch
115V, .25"
Tubing, No Flow
Switch
115V, .25"
Tubing
Manual On/Off,
115V, .25"
Tubing
Series CW: Conductivity Control with Water Meter Feed
The Series CW provides conductivity control with a water meter
feed. Bleed is initiated when the conductivity level reaches the
user specified set point. Chemical feed is initiated and controlled
by input from a water meter. The Series CW includes a solenoid
actuated metering pump, conductivity sensor, bleed relay and a
dry contact input for water meter control.
Series CL: Conductivity Control with Limit Timer
The Series CL provides conductivity monitoring and control with a
Limit Timer that controls the feed time. Tower feed and bleed are
initiated when the conductivity levels reaches the user-specified
set point. The programmable limit timer allows the operator to
specify the maximum pumping time for the feed cycle. The Series
CL includes a conductivity sensor, bleed relay and a userprogrammable limit timer.
Series WT: Feed & Bleed Control with Water Meter Input
The Series WT provides feed and bleed control with a water
meter input. The feed and bleed cycles are initiated and controlled
by input form the water meter. Separate programmable pulse
timers control the pump and bleed relay. The Series WT includes
a flow input, water meter input and two programmable pulse
timers.
Series T7: Feed Control with 7 Day Timer
The Series T7 was designed to control the feeding of biocide or
other product that must be fed on a timed schedule. The Series
T7 includes a 7-day programmable timer and clock with the ability
to control up to 8 on/off cycles per day. Each timed event can be
set to run any day of the week on a 7-day cycle. The feed cycle is
initiated and controlled by the user programmable timer.
Series ET: Feed Control with Water Meter Input
The Series ET provides feed control with input from a water meter
input. When the count exceeds a set value (either 1 or 10), the
pump starts. The pump will continue to run for an adjustable time
period. The Series ET includes both input and output water meter
connections at the front panel. The output connection provides an
isolated dry contact output of the water meter contact to operate
additional pumps or timers off the same water meter.
Siemens
Water Technologies
BACK
Wallace & Tiernan® Metering Pumps
CHEM-AD® XL Diaphragm Metering Pump
The CHEM-AD® XL range of metering pumps are mechanically actuated
diaphragm dumps with integrated controls capabilities. Capacities up to 238 GPH
Key Controls & Features
• On-off Button
• Mechanical Stroke Length Control
• Stroke Frequency Control, Level Switch Input (low level and empty)
• Power Cord and Plug up to 3.5 GPH
• External Analog Scalable Input (0/4-20 mA), (20-0/4mA)
• Input Signal Scaling, External Pulse Input
• Remote On / Off
• Batch Mode & Pulse Storage
• Alarm Output & Stroke Pulse Output
• Membrane Touch Pad Operator Interface
• Flow Monitoring (External OGM required)
• Integral Back-lit Digital Display
• Password Protection, Capacity display, Flow Totalizing
CHEM-AD® XL Diaphragm Metering Pumps with Integrated Controls
Catalog #
GPH
PSI
Description
CM1A4E60KFC9931
0.44
120
Automatic E60 Speed Controls with degas system, PVDF Liquid Ends, Ceramic Ball, Viton® O-rings
CM1B4E60KFC9933
1.36
120
Automatic E60 Speed Controls, PVDF Liquid Ends, Ceramic Ball, Viton O-rings
CM1B6E60KFC9933
3.5
60
CM1C1E60PFC9936
5
120
Automatic E60 Speed Controls, PP Liquid Ends, Ceramic Ball, Viton O-rings
CM1C3E60PFC9936
17
120
CM1C5E60PFC9939
38
35
CM1D1E60PFC9939
44
120
Accessories
Suction Lance: Includes Dual Level Switches, Foot Valve, and Strainer
AAB5197
Suction Lance, used in Series A & B all sizes
AAB5206
29.5" long, PVC Pipe, Viton® O-rings, Glass Ball
44.3" long, PVC Pipe, Viton O-rings, Glass Ball
AAC2411
Thrust Piece – one (1), required per suction lance with Series A
Use DUO hose to connect to suction valve.
AAC2423
Adapter – one (1), required per suction lance with Series B
Use 3/8" OD x 1/4" ID tubing to connect to suction valve
AAB7732
Suction Lance, used in Series C1, C2 & C3 (5 to 17 GPH)
55.1" long, PVC Pipe, Viton O-rings, Glass Ball
AAC8111
Connection Set – two (2), required per suction lance with Series C
Use 1/4" OD x 3/8" ID tubing to connect to the suction valve
Multifunction Valve (Functions include – Back Pressure, Pressure Relief, Draining & Priming.)
AAB5248
Multifunction Valve, used in Series B all sizes (0.44 to 3.5 GPH)
Back Pressure Range, 15 – 75 PSI, PVDF Housing, Viton® O-rings.
AAC5663
Thrust Piece – two (2) required per valve with Series B
AAB6973
Multifunction Valve, used in Series C1, C2 & C3 (5 to 17 GPH)
Back Pressure Range, 15 – 75 PSI, PVDF Housing, Viton O-rings.
AAC2513
Adapter, two (2) required per valve on Series C1, C2 & C3
Rigid piping installation
AAC8111
Connection Set – two (2) required per valve on Series C1, C2 & C3
Flexible tubing connection.
AAB7003
Multifunction Valve, used in Series C4 & C5 (25 to 38 GPH)
Back Pressure Range, 15 – 75 PSI, PVDF Housing, Viton O-rings.
AAC8132
Adapter, two (2) required per valve on Series C4 & C5, Rigid piping installation
Wall Mount Bracket
AAC7594
Wall Mounting Bracket (ABS) for Series A, B & C
Siemens
Water Technologies
BACK
71
72
ENCORE® 700 Diaphragm Metering Pumps
The Encore® 700 Diaphragm Metering Pump combines the robustness of
hydraulic pump with CONTROL FLEXIBILITY diaphragm pumps with the
unparalleled economy, simplicity, and serviceability of a mechanical pump. The
Encore® 700 pump is engineered to handle industrial and municipal metering
applications in water and wastewater treatment, swimming pools, food
processing, chemical processing, brewing and distillation, and agriculture.
• Non-loss-motion variable eccentric stroke adjust mechanism renders
efficiency, longevity, and reliability, as well as a smooth discharge pattern.
• Precision-engineered liquid ends meter mild solutions, aggressive
chemicals, high-viscosity polymers, and slurries with greater efficiency than
conventional liquid ends.
• Clear PVC cartridge valves for fast service with no piping disturbances and
built-in visual indication of operation.
• Premium composite diaphragm design ensures high metering accuracy,
even at varying discharge pressures.
Encore® 700 Diaphragm Metering Pump
Catalog #
PSI
PVC Head / PTFE Diaphragm / Hypalon O-ring / Manual Control
AAC1751
GPM
5
175
1/4 HP, 110VAC 1PH MOTOR
AAC1757
24
175
AAC1763
45
150
AAC1769
77
130
AAC1775
180
75
For higher capacities and options consult factory.
Additional metering pumps and water treatment accessories from leading manufactures are available.
Contact Siemens Water Technologies for a complete list of options.
Siemens
Water Technologies
BACK
Chemtube® PPS Peristaltic Pumps
In the industrial marketplace, the Chemtube® PPS hose pumps are suitable for
metering virtually any chemical to the point of application. Reliable feed rates
are maintained in either continuous or intermittent duty cycles.
There are many industrial applications for the Chemtube® PPS Hose pumps that
go beyond our traditional metering pump capabilities. Chemtube® PPS pumps
are ideal for,
• Multiphase fluids
• Shear Sensitive products & high viscosity products
• Slurries & abrasive products with high solid contents
• Highly corrosive products
• High Suction Lift conditions
• Self-priming design which will not air-lock
Chemtube® PPS :S Series
Pump Catalog #
GPH
CPS5B3GRP
2.2
CPS10B3GRP
7.0
PSI
RPM
Hose and Connection Material
Repair Kit Part No.
Hose: AAC7676
Repair Kit: AAC7931
25
Natural Rubber and PVC
Connections
90
CPS16B3GRP
25
CPS26B3GRP
115
CPS5B3GHP
2.2
CPS10B3GHP
7.0
Hose: AAB7676
Repair Kit: AAC7931
Hose: AAB7691
Repair Kit: AAC7934
Hose: AAB7706
Repair Kit: AAC7937
22
Hose: AAC1799
Repair Kit: AAC7931
25
Hypalon Hose and PVC
Connections
90
CPS16B3GHP
25
CPS26B3GHP
116
Hose: AAC1799
Repair Kit: AAC7931
Hose: AAC1802
Repair Kit: AAC7934
Hose: AAC1805
Repair Kit: AAC7937
22
Note:
1: All Chemtube® PPS models include ,S Series Pump with 5/10/16/26 mm hose, Variable Frequency Drive with
NEMA 4X enclosure, 230 VAC/60Hz/3Ph, Inverter Duty Motor 230 VAC/60Hz, PVC connections, Natural Rubber
Hose or Hypalon Hose, Leak Detector, One spare hose, Two year warranty excluding hose.
2: Refer to chemical compatibility chart for Hose material selection. Consult factory for special requirements.
3: For higher capacities and options consult factory.
Accessory required for Chemtube® PPS Hose Pumps
Pulsation Dampener (max 150 PSI )
Pump Model No.
Catalog #
Body and Diaphragm Material
Connection Size
S Series – S5
AAB7874
S Series – S10
AAB8657
S Series – S16
AAB8858
3/4” NPT (F)
S Series – S26
AAB8876
1” NPT (F)
1/2” NPT (F)
PVC / Hypalon
Pressure Relief Valve (10 – 150 PSI)
S Series S5, S10, S16, S26
AAB8816
PVC / PTFE / EPDM
1/2” NPT (F)
Siemens
Water Technologies
BACK
73
74
CHEMICAL FEED SYSTEMS AND ACCESSORIES - INSTRUMENTATION & CONTROLS
Instrumentation & Controls
Siemens offers a wide selection of instrumentation and control for cooling water
and process water applications. Whether you need to control pH, ORP,
conductivity, or more, Siemens has a controller or monitor to fit the application.
TMS-561 Turbidimeter
Depolox® 3 plus
The TMS 561 Turbidimeter is specifically designed for continuous
on-line measurement of turbidity in filtered or raw water in
municipal and industrial water treatment plants, as well as final
effluent in wastewater applications. Utilizing an EPA-approved,
reusable, primary standard, routine calibration is fast and
inexpensive. For poor-quality water, an ultrasonic, self-cleaning
system is available to reduce maintenance. An optional data
acquisition system and software package allows networking of
up to 255 turbidimeters into a single computer. The software
provides graphical trending, alarms, and filter analysis.
TMS-561 Turbidimeter
Catalog #
Light
TMS-561 BW
TMS-561 BR
TMS-561 CW
TMS-561 CR
TMS-561 DW
TMS-561 DR
White
Infrared
White
Infrared
White
Infrared
Range
0-1000 NTU
0-1000 NTU
0-100 NTU
0-100 NTU
0-1000 NTU
0-1000 NTU
Ultrasonic
Cleaning
N/A
N/A
Standard
Standard
Standard
Standard
The Depolox® 3 plus residual analyzer continuously
measures free or total (combined) chlorine in drinking
water applications. Utilizing proven and universally
accepted amperometric measurement technology, the
Depolox® 3 plus analyzer directly measures chlorine
residuals and provides a 4- 20 mA output signal for
control or recording purposes. Integral alarm relays are
included. The Depolox® 3 plus analyzer is also available
in a dual input arrangement for measuring pH or
fluoride, along with chlorine.
*Please contact Technical Support for Depolox®
analyzer options
Ultrameter™ Series Instruments
While priced like affordable single-parameter instruments,
the Ultrameter™ does the job of three, four or even six
instruments. All Ultrameter™ models deliver performance
of ±1% of reading (not merely full scale). This high level of
accuracy has been achieved through advanced fourelectrode conductivity cell technology, a unique pH/ORP
sensor and powerful microprocessor-based circuitry. With
displayed values of up to 9999, the full four-digit LCD
ensures resolution levels never before possible in such
affordable instruments.
Ultrameter™ Instruments
Catalog #
Mode #
METMYRNL4P
4PII
METMYRNL6P
6PII
Description
Conductivity, TDS, Resistivity & Temperature
Conductivity, TDS, pH, Resistivity, Temperature & ORP
Contact Technical Support for additional
information on our entire chemical feed
and control offerings including:
• Gas Feed Systems
• Dry Feed Systems
• On-Site Electrochlorination
• Liquid Metering Systems
• UV Systems
• Custom Chemical Feed Systems
• Analytical Instrumentation
• Chemical Induction Systems
• Flow Measurement & Control
Siemens
Water Technologies
BACK
Instrumentation & Controls
(continued)
Siemens offers a wide selection of instrumentation and control for cooling water
and process water applications. Whether you need to control pH, ORP,
conductivity, or more, Siemens has a controller or monitor to fit the application.
Strantrol® 916 Controller Series
Strantrol® Feed Verification Controller (FVC Series)
The Strantrol® FVC provides accurate and reliable dosing
measurement for a wide selection of metering pumps.
The Strantrol® FVC controls and verifies the liquid
chemical feed rate of actual chemical dispensed. A
proportional feedback signal changes the stroke rate of
the pump compensating for changes in pump output.
Strantrol® Feed Verification Controllers
Catalog #
Min GPH
Max GPH
FVC-1.6
.079
1.58
FVC-16
1.58
15.85
FVC-32
3.17
31.7
FVC-63
6.34
63.4
FVC-158
15.85
158.5
FVC-317
31.7
317.0
Strantrol® 916P Controller
The Strantrol® 916P Controller accurately and reliably
maintains pH and conductivity control in industrial
process water and cooling water applications. The 916P
Controller combines innovative sensor technology with
unique control schemes to offer an unequaled solution
for industrial water treatment applications.
Strantrol® 916O Controller
The Strantrol® 916O Controller is configured for High
Resolution Redox® sensing and conductivity control,
which can dramatically improve disinfection of
industrial process water and cooling water applications.
Strantrol® 916 Controllers
Catalog #
Description
916P
Conductivity / pH Controller System
916O
Conductivity / ORP Controller System
Strantrol® 885, 886 and 887 Controllers
The Strantrol® 885, 886 and 887 series of controllers
offer the reliability and precision that only comes with a
Strantrol® product. These single channel controllers are
available for ORP, pH or conductivity monitoring and
control.
Strantrol® 88X Controllers
Catalog #
Description
Strantrol 885
Conductivity / Temperature Controller
Strantrol 886
pH Controller
Strantrol 887
High Resolution Redox® (ORP) Controller
LMI® Controllers
LMI® controllers are simple to setup and operate. All
wiring and connections are included. Choose form pH,
conductivity or ORP controllers for a variety of
applications.
LMI® Controllers
Catalog #
DC-5500
DC-4000
DC-4500
DP-5000
DR-5000
BACK
Description
Conductivity Controller for Cooling with
Biocide Timers & Remote Communications
Conductivity Controller for Cooling or Boiler
(Bleed & Feed)
Conductivity Controller for Cooling with
Biocide Timers
pH Controller
ORP Controller
Siemens
Water Technologies
75
76
PULSAtrol® Series
The PULSAtrol® series economical and reliable controllers are easy to use and
require minimum maintenance.
MC9000 Series Controllers
Catalog #
MTC1PTXXXX
MC9210XXXXXX
MC9220XXXXXX
MC9230XXXXXX
MC9310XXXXXX
MC9320XXXXXX
MC9330XXXXXX
MC9510XXXXXX
MC9520XXXXXX
MC9530XXXXXX
MC9540XXXXXX
MC9550XXXXXX
MC9560XXXXXX
MC9570XXXXXX
Description
Prewire, 115VAC, with sensor tee
Conductivity Control
pH Control
Conductivity and pH Control
pH Control
Conductivity and ORP Control
Conductivity, make-up conductivity and pH Control
Conductivity (with make-up), pH and ORP COntrol
Dual Conductivity for open loop (tower)
and closed loop (chiller)
Dual Conductivity for dual cooling tower systems
PULSAtrol® MC9000 Series Controllers
The PULSAtrol® 9000 Series cooling tower controllers offer the most popular features as
standard without compromising flexibility. All controllers come standard with a complete flow
assembly mounted to a polypropylene backboard.
MC9200 Series
The MC9200 Series includes as standard, a pre-wired selectable timer, alarm output relay, dry
contact alarm output and water meter totalizer. Options available include up to two 28-day biocide
timers, single or dual 4-20mA outputs, communications and agency approvals (Contact factory for
options).
MC9300 Series
The MC9300 Series includes as standard, four taggable timers, two water meter totalizers user
configured as dry contact or hall effect,
dry contact alarm relay and alarm output relay. Options include two
4-20mA outputs, conduit connection for power and relays, communications, language and agency
approvals (Contact factory
for options).
MC9500 Series
The MC9500 Series includes as standard, four taggable timers, two water meter totalizers user
configured as dry contact or hall effect, four drum level inputs, dry contact alarm relay and alarm
output relay. Options include two 4-20mA outputs, conduit connection for power and relays,
communications, language and agency approvals (Contact factory for options).
Siemens
Water Technologies
BACK
Boilers PULSAtrol® Series
Siemens now offers the PULSAtrol® Series of boiler control instrumentation.
These economical and reliable controllers are easy to use and require minimum
maintenance.
MB9200 Series Boiler Controllers
Catalog #
MB9210XXXXX
MB9220XXXXX
MB9210XXXXX
MB9220XXXXX
MB9610XXXXXX
MB9620XXXXXX
MB9630XXXXXX
MB9640XXXXXX
Description
Dual Conductivity Control
Triple Conductivity Control
Conductivity Condensate / pH Control
MB9200 Series
The MB9200 Series includes as standard, two selectable timers, alarm
output relay, dry contact alarm output, water meter totalizer, stainless
steel sensor and mounting hardware for each boiler. Options include
single or dual 4-20mA outputs, communications and agency approvals
(Contact factory for options).
MB9300 Series
The MB9300 Series includes as standard, four selectable timers, alarm
output relay, dry contact alarm output, two water meter totalizers and
temperature compensated stainless steel sensors. Options include single
or dual 4-20mA outputs, communications, language and agency
approvals (Contact factory for options).
MB9600 Series
The MB9600 Series includes as standard, three or four selectable timers,
two water meter totalizers user configured as dry contact or hall effect,
four single point drum level inputs, dry contact alarm relay, alarm output
relay and temperature compensated stainless steel sensors. Options
include up to four 4-20mA inputs and outputs, communications, language
and agency approvals (Contact factory for options).
Siemens
Water Technologies
BACK
77
78
Vision Series Process Control
Instrumentation
Siemens now offers the Vision Series of process control instrumentation. The
Vision Series product line is designed to handle a multitude of applications and is
modular and expandable. The innovative use of USB technology makes these
units customizable. Soft keys allow for easy programming and flexibility.
Custom Control Package Design Procedure
1. Start by selecting a UV or LV controller.
2. Select the desired IntelliSense package.
3. If ordering a LV unit and more than three USB inputs/outputs are
required, select a USB Hub. Please contact the factory for application
review and design assistance.
4. If ordering a LV unit and more than four relays are required, select a
Relay Expansion Box. Please contact the factory for application review
and design assistance.
5. Choose a flow assembly with or without a panel mount.
6. Accessorize. Make your calibration high-tech. Check out the IntelliScan®
handheld.
Vision UV Single System Process Controller
Catalog #
Description
UVPSI XXX
Prewire, 115VAC, No Communications, No Panel
UVP2SXXX
Prewire, 115VAC, Modem Connection, No Panel
UVP3SXXX
Prewire, 115VAC, Ethernet Connection, No Panel
Vision LV Dual System Process Controller
LVPI SXXX
Prewire, 115VAC, No Communications, No Panel
LVP2SXXX
Prewire, 115VAC, Modem Connection, No Panel
LVP3SXXX
Prewire, 115VAC, Ethernet Connection, No Panel
Vision IntelliSense® Sensor Package
ISPCSTDU015XXX
Std. Conductivity Probe, USB Connection with 15' Cable
ISPTSTDU015XXX
Std. Toroidal Probe, USB Connection with 15' Cable
ISPPSTDU015XXX
Std. pH Probe, USB Connection with 15' Cable
ISPOSTDU015XXX
Std. ORP Probe, USB Connection with 15' Cable
ISPMXXXU015XXX
No Probe (for MPIO only), USB Connection with 15' Cable
ISPCCBSU015XXX
Boiler Conductivity Probe, USB Connection with 15' Cable
Vision Flow Assembly
FAOTXL
No Sensor Tee, No Panel, Left Flow (Right Flow = XR)
FA1TXL
One Sensor Tee, No Panel, Left Flow
FA2TXL
Two Sensor Tees, No Panel, Left Flow
FA3TXL
Three Sensor Tees, No Panel, Left Flow
Vision IntelliScan® Handheld Calibration Unit
ISCNCDXXX
IntelliScan® Unit Type - Conductivity
ISCNPOXXX
IntelliScan® Unit Type - ph/ORP
ISCNCBXXX
Combo (one conductivity sensor & one pH/ORP sensor)
Model UV
The Vision Series Model UV is a single system process control
instrument. Included as standard are two IntelliSense® sensor
connections allowing for the use of one Multipurpose IntelliSense®
sensor input/output and one general sensor IntelliSense® sensor
input (conductivity, torodial, pH or ORP); four selectable relays, one
alarm relay, three taggable timers, one flow switch input, and one
input suitable for use with dry contact or hall effect water meters.
Model LV
The Vision Series Model LV is a dual system process control
instrument. As standard, it comes with three IntelliSense® sensor
connections (allowing for the use of three general sensor inputs, two
general sensor inputs and one multipurpose input/output, or one
general sensor input and two multipurpose inputs/outputs), four
selectable relays, one alarm relay, six taggable timers, two flow
switch inputs, and two inputs suitable for use with dry contact or hall
effect water meters.
IntelliSense® Sensor Package
By converting an analog input to a digital signal, the IntelliSense®
sensor provides auto sensor recognition, eliminates drifting potential
and allows travel up to 1000 feet (when using a RS-422 connection).
USB connections are limited to 15 feet. Each of the 5 available
sensory heads are color coded and measure a multitude of variables.
NOTE: The multipurpose IntelliSense® sensor can only be used with
a USB connection and consists of four functions (a contact input and
output, and a 4-20mA input and output0, which can all be used
simultaneously or independently.
Flow Assembly
The flow assembly features 3/4" PVC plumbing with a flow switch and
sample valve. When ordering the flow assembly you can specify if
you would like it mounted on a panel with the process control
instrument.
IntelliScan® Handheld Calibration Unit
The IntelliScan® Unit is a handheld device that revolutionizes the
calibration process by eliminating the need for manual data entry. It
has an infrared port that allows calibration data to be transmitted to
the IntelliSense® sense form the IntelliScan® unit. The IntelliScan®
unit comes with its own convenient carrying case and belt-clip
attachment.
Siemens
Water Technologies
BACK
CHEMICAL FEED SYSTEMS AND ACCESSORIES - STORAGE AND BULK TANKS
79
Reverse Osmosis & Bleach
Storage Tanks
Siemens offers a wide variety of storage and bulk tanks for RO systems and
bleach. Each RO tank is constructed of HDPE and bleach tanks are HDXLPE and is
rated at 1.90 S.G. with OR1000 lining. All tanks are NSF Certified and fitting
packages are available. Secondary containment is also offered as well as heat
tracing and seismic restraints.
Reverse Osmosis Water Storage Tanks – HDPE
Catalog #
Nominal Capacity
Approx. O.D.
1006150
1005050
1004150
1003000
1002000
1001150
1100475
1000100
10' – 2"
7' – 10"
8' – 6"
7' – 1"
7' – 1"
5' – 4"
4' – 0"
1' – 11"
6150
5050
4150
3000
2000
1150
475
100
Approx Overall
Height
Lid Size
12' – 4"
16' – 0"
12' – 6"
11' – 8"
8' – 6"
8' – 2"
6' – 3"
5' – 7"
24"
24"
24"
24"
24"
10"/19"
17"
7"
Approx. Overall
Height
Lid Size
Reverse Osmosis Water Storage Tanks – Fittings
Catalog #
Description
Venting
7457
3" Mushroom Vent – PP
Pump Suction
7117
2" BHF PVC/EPDM
4844
Nipple 2" x Short PVC
3188
2" T x T Spears Compact Ball Valve PVC
Level
7117
2" BHF PVC/EPDM
Fill
7117
2" BHF PVC/EPDM
Optional Overflow
7117
2" BHF PVC/EPDM
Bleach Storage & Bulk Tanks
Catalog #
Nominal Capacity
Approx. O.D.
1000540
1000805
1000905
1001300
1001400
1002000
1002650
1003900
4' – 0"
4' – 0"
5' – 4"
7' – 1"
5' – 4"
7' – 1"
8' – 0"
7' – 10"
540
805
907
1300
1400
2000
2650
3900
6' – 9"
9' – 11"
6' – 9"
5' – 10"
10' – 0"
8' – 6"
8' – 9"
12' – 9"
19"
19"
19"
19"
19"
24"
24"
24"
Secondary
Containment Catalog #
1500700
1500960
1501200
1502000
1501750
1502650
1503350
1504500
Note: Larger tanks sizes are available. Contact Stranco® at 800-882-6466 for additional information.
Siemens
Water Technologies
BACK
80
CLARIFIERS
Chevron Tube
Treated Water
Settler Supports Collector
Raw Water Inlet
Overflow Treated Water
Outlet
Permutit® Package Precipitators
Package Precipitators offer an efficient means for removing impurities from a liquid by
precipitation, adsorption, settling and upflow filtration. Used for the initial treatment
of water to reduce suspended impurities, turbidity, color, hardness, iron and
manganese, the Package Precipitator provides high rate clarification in minimum
space. Adaptable to variable flow rates, it offers excellent chemical efficiency and
produces low turbidity effluent. Optional Chevron shape, high rate tube settlers offer
over 35% increased flow rate.
Agitator
Drains
Sludge
Blowoff
• Low turbidity precipitator effluent is virtually always superior to the effluent of
conventional clarifiers/softeners
• The action of suspended sludge in the mixing zone and upflow through the sludge
blanket utilizes chemicals more efficiently
• Large, slow moving agitator blades completely mix the water, chemicals and sludge
• The low turbidity effluent of a precipitator places little load on downstream filters,
thus permitting longer filter runs and lower treatment costs
Model Number
Maximum Flow Rate
Without Tube Settlers . . . . . . . . . . . . . . . .
With Tube Settlers . . . . . . . . . . . . . . . . . .
Surface Area . . . . . . . . . . . . . . . . . . . . . . . .
Tube Settling Area . . . . . . . . . . . . . . . . . . . .
Agitator Motor . . . . . . . . . . . . . . . . . . . . . . .
Inlet/Outlet Overflow Size . . . . . . . . . . . . . .
Sludge, Blow-off & Flush-back
Valve Size . . . . . . . . . . . . . . . . . . . . . . . . . .
Detention (60 minutes). . . . . . . . . . . . . . . . .
1
2
3
4
5
6
44 gpm
60 gpm
35 sq. ft.
25 sq. ft.
1/2 hp
3”
88 gpm
120 gpm
70 sq. ft.
50 sq. ft.
1/2 hp
4”
132 gpm
180 gpm
105 sq. ft.
75 sq. ft.
1/2 hp
6”
175 gpm
240 gpm
140 sq. ft.
100 sq. ft.
1/2 hp
6”
220 gpm
300 gpm
175 sq. ft.
125 sq. ft.
3/4 hp
8”
250 gpm
350 gpm
200 sq. ft.
150 sq. ft.
3/4 hp
8”
1”
2,600 gal.
1-1/2”
5,200 gal.
1-1/2”
7,800 gal.
2”
10,400 gal.
2”
13,000 gal.
2”
15,000 gal.
96x120x126
244x305x320
96x180x126
244x457x320
96x240x126
244x610x320
96x300x126
244x762x320
108x300x126
275x762x320
9,000
4,082
12,000
5,454
15,000
6,804
18,000
8,165
19,000
8,618
7
8
9
10
11
12
280 gpm
400 gpm
225 sq. ft.
175 sq. ft.
3/4 hp
8”
310 gpm
450 gpm
250 sq. ft.
200 sq. ft.
3/4 hp
8”
340 gpm
500 gpm
275 sq. ft.
225 sq. ft.
3/4 hp
10”
460 gpm
680 gpm
375 sq. ft.
300 sq. ft.
1 hp
10”
540 gpm
800 gpm
440 sq. ft.
350 sq. ft.
1 hp
12”
620 gpm
920 gpm
505 sq. ft.
400 sq. ft.
1-1/2 hp
12”
2”
16,800 gal.
2”
18,600 gal.
2”
20,500 gal
2”
27,700 gal.
2”
32,500 gal.
3”
37,350 gal.
132x300x126
335x762x320
144x300x126
366x762x320
144x408x126
366x1036x320
144x480x126
366x1219x320
144x552x126
366x1402x320
21,000
9,526
22,000
9,980
30,000
13,608
35,000
15,876
38,000
17,237
System Dimensions
WxLxH
inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96x60x126
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244x153x320
Shipping Weight
lb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,000
kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,722
Model Number
Maximum Flow Rate
Without Tube Settlers . . . . . . . . . . . . . . . .
With Tube Settlers . . . . . . . . . . . . . . . . . .
Surface Area . . . . . . . . . . . . . . . . . . . . . . . .
Tube Settling Area . . . . . . . . . . . . . . . . . . . .
Agitator Motor . . . . . . . . . . . . . . . . . . . . . . .
Inlet/Outlet Overflow Size . . . . . . . . . . . . . .
Sludge, Blow-off & Flush-back
Valve Size . . . . . . . . . . . . . . . . . . . . . . . . . .
Detention (60 minutes). . . . . . . . . . . . . . . . .
System Dimensions
WxLxH
inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120x300x126
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305x762x320
Shipping Weight
lb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20,000
kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,072
For Permutit ® products and information contact 908-704-9027.
Siemens
Water Technologies
BACK
81
CLEAN-IN-PLACE SKIDS
CIP Series Cleaning Skids
CIP Series Cleaning Skids are designed for on-site cleaning of RO systems. They
can accommodate cleaning flow rates of 30–225 gpm and are compatible with
TFC or CA membrane elements.
• Factory assembled, tested and field-ready cleaning skids offer a convenient and
economical way to maximize your RO investment
• Rugged construction withstands cleaning chemicals
• CIP-30, CIP-60 are portable for quick and easy on-site cleaning
Model Number
CIP-30
CIP-60
CIP-90
CIP-150
CIP-225
System Dimensions
H x W x D*
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67x41x72
26x16x28
69x41x72
27x16x28
69x51x90
27x20x35
69x64x106
27x25x42
78x78x128
31x31x50
1250
567
2600
1179
3500
1588
6000
2722
9500
4309
Flow Rate at 60 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tank Capacity (gallons) . . . . . . . . . . . . . . . . . . . . . . . . .
Connection Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Weight
Industrial
lb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number
67/CIP
System Name . . . . . . . . . . . . . . 67/CIP
XX(X)
30 gpm
90
1.5"
Mobile
60 gpm
200
2"
Mobile
90 gpm
275
2"
Fixed
150 gpm
440
3"
Fixed
225 gpm
800
3"
Fixed
5 HP
5 HP
10 HP
10 HP
15 HP
240/480V/60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30 = 30 gpm
60 = 60 gpm
90 = 90 gpm
150 = 150 gpm
Flow Rates . . . . . . . . . . . . . . . . . . . . . .
225 = 225 gpm
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–
XXX
240 = 240V, 60 Hz
480 = 480V, 60 Hz
(Other voltages
available. Contact
technical support)
Example: 67/CIP30-240 gpm system using 240 volts.
Cleaning Skid Options (order as separate line item)
Description
pH Monitor
High Temperature Switch
Flow Switch
1" x 25' Hose Kit
1-1/2" x 25' Hose Kit
2" x 25' Hose Kit
3" x 25' Hose Kit
Part Number
24/S1900-170
24/S1900-171
24/S1900-172
24/S1900-181
24/S1900-182
24/S1900-183
24/S1900-184
In accordance with Siemens policy for continual product development and improvements, we reserve
the right to change the product information within this literature at any time, without notice.
Siemens
Water Technologies
BACK
82
CONTINUOUS DEIONIZATION (CDI®) SYSTEMS
CDI-LX™ Systems
Flow Rates from 2.5 to –180 gpm
Continuous electrodeionization is a safe, chemical-free way to take RO (reverse
osmosis) water to a higher level of purity. CDI-LX™ systems are pre-engineered and
specifically designed to meet the demands of the pharmaceutical, power,
microelectronics and general industry customer. The standard CDI-LX™ systems
have flow rates from 2.5 to 180 gpm (0.57–40.88 m3/hr), combining single or
multiple (up to 8) CDI-LX™ modules on a frame with power supply, controllers,
piping, sample valves and cleaning connections. Flow and quality monitoring
instrumentation is standard. Remote I/O is also available as an option.
Features:
• Rugged construction
• Easily validated
• Hot water sanitizable (HWS) units
• Leak-free operation
available up to 185˚F (85˚C)
• High operating pressure (up to 100 psi)
• High operating temperature
• Low power consumption
(up to 45˚C; 113˚F)
Model Number CDILXH
Number of Modules on Skid
1001
1
2401
1
3001
1
3002
2
3003
3
3004
4
3006
6
3008
8
Minimum Flow Rate gpm (m3/hr)
Nominal Flow Rate gpm (m3/hr)
Maximum Flow Rate gpm (m3/hr)
2.5 (.57)
5 (1.13)
7.5 (1.70)
6.25 (1.42)
12.5 (2.84)
18.75 (4.26)
Connections
Feed
Product
Reject
90-95%
90-95%
90-95%
90-95%
90-95%
90-95%
90-95%
3/4”
3/4”
1/2”
1”
1”
1/2”
1”
1”
1/2”
1-1/2”
1-1/2”
1/2”
2”
2”
1”
2”
2”
1”
3"
3"
1-1/2”
3"
3"
1-1/2”
60
80
130x40x78
330x102x198
5000 (2268)
130x40x78
330x102x198
5600 (2540)
Typical recovery
Electrical Service Required
Voltage
Amperage
Catalog Number:
System Name
CDILX
CDILX
208/240V, 1 phase, 50/60 Hz
40
40
15
System Dimensions
L x D x H inches
cm
Shipping Weight lb. (kg) (est.)
90-95%
7.5 (1.70)
15 (3.41)
22.5 (5.11)
40x33x77
102x83x196
500 (227)
X
40x33x77
102x83x196
530 (240)
XX
40x33x77
102x83x196
550 (250)
XX
X
15 (3.41)
30 (6.81)
45 (10.22)
20
40x33x77
102x83x196
900 (408)
22.5 (5.11)
45 (10.22)
67.5 (15.33)
30 (6.81)
60 (13.63)
90 (20.44)
480V, 3 phase, 50/60 Hz
30
40
75x40x83
191x102x211
3000 (1361)
75x40x83
191x102x211
3300 (1497)
X
X
H = Hot Water
Sanitizable (HWS)
Module
X = Non-HWS
Module
01
02
10
03
1 = 240V,
24
04
A = PVC, Sch. 80
1 Phase, 50/60 Hz
06
Number of Cell Pairs/Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
(Non HWS Model only)
2 = 208V,
Number of Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
D = 316L SS, Sanitary Tube (for
1 Phase, 50/60 Hz
Feed and Product Plumbing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HWS Model and X Models) 4 = 480V,
Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Phase, 50/60 Hz
*Not all model combinations are available. Contact Siemens for specific CDI-LX™ applications beyond the standard specifications.
To determine your order number, replace the X with one of the numbered options below it. “X” must be specified if option is not requested.
Siemens
Water Technologies
45 (10.22)
90 (20.44)
135 (30.66)
A = NEMA 12 without
Remote I/O
B = NEMA 12 with
Remote I/O
C = NEMA 4 without
Remote I/O
D = NEMA 4 with
Remote I/O
E = NEMA 4X without
Remote I/O
F = NEMA 4X with
Remote I/O
BACK
60 (13.63)
120 (27.25)
180 (40.88)
83
CONTINUOUS ELECTRODEIONIZATIONSYSTEMS
CDI® Replacement Modules
CDI® Replacement modules are available for both older legacy CDI® Systems and
current standard CDI® Systems.
Available legacy CDI® modules: H-Series (H30, H60, H120, H240), P-Series (P-180)
and Compact CDI® (C10, C20, C40) Systems. Unfortunately, the above H-Series and
Compact CDI® modules cannot be replaced by LX or VNX modules due to
incompatibilities with the power supply.
CDI® P-180 System Upgrade: Because of the cost savings and benefits associated
with the CDI® LX Series, many existing P-180 customers are now upgrading to the LX
Series, and a complete upgrade kit is available. The kit is specifically designed to
replace the P-180 modules with minimal field retrofit labor required. The upgrade kit
includes simplified connections to match the existing P-180 system connections.
LX and VNX Modules: Replacement CDI® modules for current standard LX and VNX
systems.
Benefits of LX and VNX include:
• Offers the latest generation of continuous electrodeionization technology
• Offers a robust design for superior performance with the highest reliability in
the industry
• Guarantees leak-free operation
• Uses the existing skid/footprint, power supplies, instruments and controls
H Series Model Numbers
H30
H60
H120
H240
P-Series Model Numbers
For All Models
LX Series Model Numbers
4 cell pair module – non-hot water sanitizable
4 cell pair module – instant hot water sanitizable
24 cell pair module – E-Cell® replacement
30 cell pair module – E-Cell® replacement
P-180 Upgrade Kit
VNX Series Model Number
VNX-X3
VNX50
Replacement Module Catalog Number
ZM3H030CP
ZM3H060CP
ZM3H120CP
ZM3H240CP
CDIPM0180C
IP-LXM04X-3
IP-LXM10X-3
IP-LXM18X-3
IP-LXM24X-3
IP-LXM30X-3
IP-LXM4HI-3
IP-LXM10HI-3
IP-LXM18HI-3
IP-LXM24HI-3
IP-LXM30HI-3
IP-LXM24MK-1
IP-LXM30MK-1
IP-LXMP180
IP-VNX-X3
IP-VNX50
NOTE: 1) The Compact Series replacement modules are also available; Contact Siemens for additional details.
2) Please locate the module serial number located on the anode junction box for correct replacement.
Siemens
Water Technologies
BACK
84
CONTROL PANELS
H2O Control
The H2O Control panel family is a product offering of control panels that include
pump starter panels (single phase up to 2 HP and three phase up to 10 HP) as well
as alarm* and remote alarm* panels. Continuously on lamps are robust LED’s, alarm
lamps are bright visible incandescent bulbs. All panels are UL and cUL Listed. Panels
not specifically listed as part of the product line are also available as custom panels.
• All panels offered as NEMA 4/12, NEMA 4X Composite, NEMA 4X Stainless steel
• Single phase pump starter panels offered as 120 or 220 VAC with options for
Simplex, Duplex, and Duplex with alternating timer
• Three phase pump starter panels offered as 208, 230, 460, or 575 VAC with options
for Simplex, Duplex, Duplex with alternating timer, auxiliary interclock, alarm
• All wires and screw terminals labeled for easy identification
• Panel drawing provided with each panel
1-Phase Pump Starter
3-Phase Pump Starter
Alarm*
Remote Alarm*
* Alarm and Remote Alarm panels have not been approved for use in dialysis applications.
Siemens
Water Technologies
BACK
85
DEAERATORS
Permutit® SLH Deaerating Heaters
Permutit® SLH Deaerating Heaters remove oxygen, free carbon dioxide and other
non-condensable gases from make-up water used for boiler feed, as well as from
return condensate. This product combines simplicity and compactness with high
performance and operational efficiency. SLH horizontal deaerating heaters are ideal
for low-pressure boiler plants.
• Compact construction keeps headroom and space requirements to a minimum
• Violent scrubbing action assures complete heating and deaeration
• Maximum efficiency is achieved by preheating water to near steam temperature
• Unique stainless steel internal direct contact vent condenser makes the required
vent rate so low it almost eliminates steam loss
• Simple, inexpensive installation
• Furnished with internal vent condenser and spray valves, inlet control valve,
overflow control, thermometer, sentinel relief valve, pressure gauge, gauge
glasses and structural support
Model Number
Outlet Capacity
lb./hour . . . . . . . . . . . . . . . . . . . . . . . .
gpm. . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage
lb. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
gallons . . . . . . . . . . . . . . . . . . . . . . . .
System Dimensions
HxDxW
feet . . . . . . . . . . . . . . . . . . . . . . . . .
m...........................
Shipping Weight
lb.. . . . . . . . . . . . . . . . . . . . . . . . . . .
kg. . . . . . . . . . . . . . . . . . . . . . . . . . .
SLH-9
SLH-18
SLH-30
SLH-50
SLH-70
SLH-90
SLH-110
SLH-150
9,000
18
18,000
36
30,000
60
50,000
100
70,000
140
90,000
180
110,000
220
150,000
300
1,500
180
3,000
360
5,000
600
8,333
1,000
11,667
1,400
15,000
1,800
18,333
2,200
25,000
3,000
7x8x10
17x20x25
7x8x13
17x20x33
7x8x17
17x20x43
8x9x18
20x23x46
9x10x17
23x25x43
9x10x20
23x25x50
9x10x28
23x25x71
9x10x27
23x25x68
1,920
871
2,360
1,070
3,010
1,365
4,200
1,905
5,160
2,340
5,860
2,658
6,900
3,130
8,000
3,628
Vessels are designed per the ASME Code. Minimum shell and head-plate thickness 1/4".
Units with <50,000 lb. capacity are 50 psi ASME Code design pressure.
Units with >50,000 lb. capacity are 30 psi ASME Code design pressure.
For Permutit® products and information, contact 908-704-9027.
Siemens
Water Technologies
BACK
86
DEGASIFIERS
DG Series Forced Draft Decarbonators
DG Series Forced Draft Decarbonators are designed to remove dissolved gases from
process water without changing its ambient temperature. The DG Series reduces
the load on deionization equipment and can extend the usable life of
neutralization chemicals and eliminates gas-related problems from the process
stream. The DG Series may also be used to oxidize dissolved iron and manganese
for removal by filtration or clarification.
• Large clearwell (storage tank) eliminates the need for additional storage facilities
• Polypropylene hollow sphere packing provides a high active surface area for air
contact with water for rapid and efficient gas removal
• Easy to maintain with removable top for access inside and a packing section
clean-out
• Fiberglass tower with a flat sealed bottom and top air inlet distributor evenly
distribute incoming water over the surface of the packing
• Skid mounted stainless steel transfer pumps are available
• Optional HEPA filters remove airborne particles as small as 0.5 micron
Model Number
Flow rate . . . . . . . . . . . . . . . . . . . . . . . . .
Air at 1' WC (Water Column). . . . . . . . . .
Clearwell Capacity. . . . . . . . . . . . . . . . . .
Packing Volume (cubic ft.). . . . . . . . . . . .
System Dimensions
Tower Diameter . . . . . . . . . . . . . . . . . . . .
Clearwell Diameter . . . . . . . . . . . . . . . . .
Height . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Weight
lb. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kg . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DG-12
15 gpm
350 cfm
190 gal
6
DG-18
35 gpm
350 cfm
259 gal
15
DG-24
DG-30
DG-36
DG-42
DG-48
DG-54
DG-60
12"
3'
13'
18"
3.5'
14'-6"
24"
4'
15'
30"
4.5'
16'
36"
5'
16'
42"
6'
16'
48"
6'
17'
54"
8'
16'
60"
8'
17'
Number
DG-12
DG-18
DG-24
DG-30
DG-36
DG-42
DG-48
DG-54
DG-60
Decarbonators
Catalog Number
100 gpm
490 cfm
549 gal
40
150 gpm
775 cfm
677 gal
55
200 gpm
1100 cfm
976 gal
80
250 gpm
1375 cfm
1189 gal
105
300 gpm
1575 cfm
1735 gal
130
400 gpm
2100 cfm
2115 gal
165
2,100
2,700
3,400
5,300
6,200
8,900
10,900
15,900
19,400
953
1,225
1,542
2,404
2,812
4,037
4,944
7,212
8,800
480V/3 phase/60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Model
60 gpm
350 cfm
339 gal
25
Catalog Number
67/S2201-120
67/S2201-180
67/S2201-240
67/S2201-300
67/S2201-360
67/S2201-420
67/S2201-480
67/S2201-540
67/S2201-600
24/S2201-710
24/S2201-710
24/S2201-710
24/S2201-720
24/S2201-730
24/S2201-740
24/S2201-750
24/S2201-760
24/S2201-770
Optional HEPA Filter Kit
Description
HEPA Filter Kit, 120, 180, 240
HEPA Filter Kit, 300
Siemens
Water Technologies
BACK
87
DEIONIZERS
Deionization Recirculating Systems (DIRS)
Economical, pre-packaged water purification systems producing high purity water.
Depending on water quality requirements, systems are designed to permit several different
field configurations to accommodate specific requirements. For ease and flexibility of
operation, the systems are controlled by a PLC integral to the skid. Systems with higher
flow rates and/or alternate plumbing options are available with little or no impact to
delivery times.
• Small skid mounted footprint to conserve valuable floor space
• Schedule 80 PVC piping with optional pigmented polypropylene (PP) for post-treatment
piping
• Powder-coated steel frames for maximum support of DIRS system while allowing easy
access for maintenance and operation
• Fully assembled system that is wired and hydrostatically tested prior to shipment
• Complete documentation package including installation, start-up and operation
procedures, P&ID, Electrical Schematics and Quality Assurance data reports
• PLC controls allow for multiple field configurations without altering the control system
hardware
• Fast delivery with pre-manufactured systems
• Quick installation and startup with typically less than one day need for system operation
• Minor field changes permit installation in one of the three configurations shown below
• UL and Seismic Zone 4 compliance to meet regional permitting regulations
Configuration #1
Configuration #2
Configuration #3
BACK
Siemens
Water Technologies
88
DEIONIZERS
VP Series Two Bed Deionizers
VP Series Two Bed Deionizers are designed and manufactured for industrial
applications. They are rugged, pre-engineered, pre-assembled, standardized units
that minimize expensive installation and start-up costs. VP Series Two Bed Deionizers
consist of an acid regenerated cation vessel piped in series with a caustic
regenerated anion vessel. These pre-engineered units provide high-quality water
over the length of the service cycle. Operating conditions and an influent water
analysis are required for predicting effluent quality and total volume of water treated
before regeneration is required. To reduce field fit-up problems with interconnecting
piping, the VP Series Two Beds must be ordered with the skid-mounted option.
• Simple design maximizes reliability, efficiency and repeatability
• 100 psig vessel ratings offer added strength and integrity
• Baked PVC lining and paint extend vessel life
• PLC controls ensure extremely reliable operation
• Inlet flow meter assures consistent performance
• Conductivity monitor assures consistent water quality
• Schedule 80 PVC piping ensures long life and does not degrade water quality
Diameter
016
Service Flow Rate (gpm) .
Minimum Flow Rate (gpm)
Media (cubic feet)
Cation Resin Volume (ft3)
Capacity (kgr) . . . . . . . .
Anion
Resin Volume (ft3) . . .
Capacity (kgr) . . . . . . . .
Pipe Size . . . . . . . . . . . . . .
System Dimensions
H x L x W . . . . . . . . . .inch
. . . . . . . . . . . . . .cm
Shipping Weight
lb (kg) . . . . . . . . . . . . . . .
020
024
030
036
042
048
054
060
066
072
10
3
17
4
24
6
38
10
54
14
74
19
97
23
123
31
153
39
182
47
220
55
4
80
6
120
10
200
15
300
21
420
28
560
36
720
46
920
57
1,140
69
1,380
82
1,640
4.5
77
1”
7
120
1”
11
190
1”
17
290
1-1/4”
24
410
1-1/2”
33
560
2”
42
715
2”
54
920
2-1/2”
67
1,140
3”
81
1,380
3”
96
1,640
4”
96x56x43
97x64x48
99x72x50
108x84x59
114x96x62 118x108x65 120x120x78 125x132x82 127x144x84 132x156x92 136x168x100
244x142x117 246x162x122 251x183x127 274x213x150 289x244x157 300x274x165 305x305x198 317x335x208 322x366x213 335x396x234 345x427x254
1800 (817)
2900 (1316) 3800 (1724)
4400 (1996)
6000 (2722) 7860 (3566) 9670 (4387)
11880 (5389) 14880 (6750) 20040 (9090) 25200 (11431)
Electrical Requirements .
120 V/60 Hz/single phase/15 amps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number:
VPT
S
System..................................... VPT
Configuration............................................... S=Simplex*
XXX
X
X
B
P
016 - 16"x72"
048 - 48"x72"
020 - 20"x72"
054 - 54"x72"
024 - 24"x72"
060 - 60"x72"
030 - 30"x72"
066 - 66"x72"
A=100 psig
036 - 36"x72"
072 - 72"x72"
ASME code
Y=Skid, seismic
Vessel Size ............................................................................... 042 - 42"x72"
X=100 psig
zone 2A
Vessel Rating .............................................................................................................................................. non-code
Z=Skid, seismic
Vessel Support .........................................................................................................................................................................
zone 4
B=PVC lining
Lining and Paint.........................................................................................................................................................................................................
and paint
P=SolidControls ................................................................................................................................................................................................................................................. State PLC
Control Rating ...............................................................................................................................................................................................................................................................
*Duplex units should be ordered as two (2) simplex units.
To determine your order number, replace the X with one of the numbered options below it.
Siemens
Water Technologies
BACK
D
D=NEMA 4/UL
89
DEIONIZERS
VP Series Mixed Bed Deionizers
Model VPM
VP Series Mixed Bed Deionizers are designed and manufactured for industrial applications.
They are rugged, pre-engineered, pre-assembled, standardized units that minimize expensive
installation and start-up costs. Their simple design maximizes the efficiency and repeatability
of the unit during the service and regeneration modes in order to provide a truly reliable
water treatment unit. VP Series Mixed Bed Deionizers consist of a single vessel that contains
both cation and anion ion exchange resins. The cation resin is a strong acid type. The anion
resin is a strong base, Type II. These pre-engineered units provide high-quality water over the
length of the service cycle. Operating conditions and an influent water analysis are required
for predicting the effluent quality and total volume of water treated before regeneration is
required.
• Simple design maximizes reliability, efficiency and repeatability
• 100 psig vessel ratings offer added strength and integrity
• Baked PVC lining and paint extend vessel life
• PLC controls ensure extremely reliable operation
• Inlet flow meter assures consistent performance
• Resistivity monitor assures consistent water quality
• Schedule 80 PVC piping ensures long life and does not degrade water quality
Diameter
016
Service Flow Rate (gpm) . . . . .
Minimum Flow Rate (gpm) . . . .
Media (cubic feet)
Cation Resin Volume (ft3) . . . .
Capacity (kgr) . . . . . . . . . . . .
Anion Resin Volume (ft3) . . . . .
Capacity (kgr) . . . . . . . . . . . .
Pipe Size . . . . . . . . . . . . . . . . . .
System Dimensions
H x L x W . . . . . . . . . . . . . .inch
. . . . . . . . . . . . . . . . . . . . . . .cm
Shipping Weight
lb (kg) . . . . . . . . . . . . . . . . . . . .
Electrical Requirements . . . .
Catalog Number:
16
3
25
4
020
36
6
024
56
10
030
82
14
036
112
19
042
145
23
048
054
185
31
229
39
060
272
47
066
330
55
072
1.5
30
2.5
25
1"
2
40
4
40
1"
3
60
6
60
1-1/4"
6
120
13
130
1-1/2"
9
180
18
180
2"
12
240
25
250
2-1/2"
16
320
32
320
3"
21
420
41
410
3"
25
500
51
510
4"
31
620
62
620
4"
37
740
73
730
4"
89x48x52
89x51x55
117x54x56
226x122x132 226x129x140 297x137x142
132x57x60
141x63x66 145x70x70 200x78x75
335x145x152 358x160x173 368x178x178 508x198x191
159x90x78 159x96x84 166x106x93 174x117x112
404x229x198 404x244x213 422x269x236 442x297x259
1080 (490)
3000 (1361)
6170 (2799)
1750 (794)
2280 (1034)
3700 (1678) 4530 (2055)
5330 (2418)
7570 (3434) 10080 (4572) 12470 (5657)
120V/60 Hz/single phase/15 amps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VPM
S
System . . . . . . . . . . . . . . . .
VPM
Configuration. . . . . . . . . . . . . . . . . . . . . . . . S=Simplex*
XXX
X
X
B
P
D
016 - 16"x72"
048 - 48"x96"
020 - 20"x72"
054 - 54"x96"
024 - 24"x72"
060 - 60"x96"
X=Legs, seismic
030 - 30"x96"
066 - 66"x96"
A=100 psig
zone 4
036 - 36"x96"
072 - 72"x96"
ASME code
Y=Skid, seismic
Vessel Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
042 - 42"x96"
X=100 psig
zone 2A
Vessel Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . non-code
Z=Skid, seismic
Vessel Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . zone 4
B= Baked
Lining and Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PVC
P=SolidControls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . State PLC
D=NEMA 4
Control Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and UL Label
*Duplex units should be ordered as two (2) simplex units.
Siemens
Water Technologies
BACK
90
DEIONIZERS
VP Series Deionizer Accessories
Model VPZ
VP Series Deionizer accessories provide additional flexibility for mixed bed and two
bed deionizers. These accessories are pre-engineered, pre-assembled catalog units
that are shipped loose for field installation on the deionizer.
Low Flow Recirculation (LFR):
The low flow recirculation accessory ensures high water quality from the deionizer when operating at flow rates below the minimum specified
rate. The recirculation pump automatically runs when the service flow rate drops below the minimum specified rate. The recirculation pump is a
316 stainless steel, close-coupled, centrifugal pump with a 115 volt, TEFC motor. Also included is a local control enclosure that is wired directly to
the main control enclosure on the deionizer.
Diameter
Recirculation Flow Rate (gpm)
Horse Power . . . . . . . . . . .
Size Code . . . . . . . . . . . . . .
016
3
0.5
016
020
4
0.5
020
024
030
6
0.5
024
10
0.5
030
036
14
0.5
036
042
19
0.75
042
048
23
0.75
048
054
31
0.75
054
060
39
1.0
060
066
47
1.0
066
072
55
1.0
072
Effluent Resin Trap (TRP):
The effluent resin trap accessory prevents the loss of ion exchange resin from the deionizer vessel in the unlikely event of underdrain failure. The
effluent resin trap consists of a clear section of PVC pipe with a PVC slotted strainer. The effluent resin trap is installed in the service effluent piping
of the anion or mixed bed vessel.
Diameter
Mixed Bed Pipe Size . . . . .
Mixed Bed Size Code . . . .
Two Bed Pipe Size . . . . . . .
Two Bed Size Code . . . . .
016
1"
100
1"
100
020
1"
100
1"
100
024
030
1-1/4"
125
1"
100
1-1/2"
150
1-1/4"
125
036
2"
200
1-1/2"
150
042
2-1/2"
250
2"
200
048
3"
300
2"
200
054
3"
300
2-1/2"
250
060
4"
400
3"
300
066
4"
400
3"
300
072
4"
400
4"
400
Pressure Reducing Regulator (PRV):
The pressure reducing regulator accessory ensures consistent and reliable operation of the deionizer when the feedwater undergoes fluctuations
in pressure. This self-contained regulator is installed on the feedwater inlet of the deionizer.
Diameter
Mixed Bed Pipe Size . . . . .
Regulator Size . . . . . . . . . .
Mixed Bed Size Code . . . .
Two Bed Pipe Size . . . . . . .
Regulator Size . . . . . . . . . .
Two Bed Size Code . . . . .
016
1"
3/4"
075S
1"
3/4"
075S
020
1"
3/4"
075D
1"
3/4"
075D
024
1-1/4"
1"
100D
1"
1"
100D
ORDERING INFORMATION Order as separate items
Catalog Number:
VP
Z
Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . Accessory
030
Size Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
............
1-1/2"
1-1/4"
125S
1-1/4"
1-1/4"
125S
XXX
See tables for
size code
................
................
Accessory Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
036
2"
1-1/4"
125D
1-1/2"
1-1/4"
125D
042
2-1/2"
2"
200S
2"
2"
200S
048
3"
2"
200D
2"
2"
200D
054
3"
2"
200D
2-1/2"
2"
200D
060
4"
2-1/2"
250S
3"
2-1/2"
250S
066
4"
2-1/2"
250D
3"
2-1/2"
250D
XXX
LFR-Low flow recirculation pump
TRP-Resin trap
PRV-Pressure reducing regulator
Siemens
Water Technologies
BACK
072
4"
3"
300S
4"
3"
300S
91
Hemodialysis Bicarbonate Mixing and
Dispensing System
This Siemens Water Technologies system provides consistent bicarbonate mixing and
dispensing. This semi-automatic system reduces the technician’s time and efforts by
automating all operations, especially cleaning. It delivers solution directly to the
distribution loop.
Features that make the difference include:
• Plastic components provide superior corrosion resistance
• Simple, yet rugged construction ensures high reliability
• Pre-assembled, skid-mounted systems reduce installation time and cost
• Programmable Logic Control system meets exacting automatic operational
requirements
• 50 and 100 gallon tank models are available
Model Number
BICARB50
BICARB100
Tank Capacity
50 GAL
100 GAL
50 GAL TANK. . . . . . . . . . . . BICARB50SYS
Feed
Loop Distribution
4 GPM@ 40psi
Loop Return
Feedwater Inlet
3/4" NPT
Loop Return
3/4" NPT
Drain
1" Socket
Utility Requirements
Waste Drain (min)
115 VAC, 1 Phase, 60Hz, 15A
RO or DI water produced to AAMI standards for Hemodialysis
1"
Physical Dimensions Specifications*
Length
70"
83"
60"
60"
Depth
27"
Shipping Weight
300 lbs
Height
Operating Weight
100 GAL TANK. . . . . . . . . . . BICARB100SYS
1/2" NPT
Loop Distribution
Feedwater
Part Number
Optional Components
Part Number
Pressure Control Valve for
Distribution Outlet. . . . . . . . . 05/ZIVC00141
4 GPM
Skid Process Connection Specifications
Electrical Service
2 GPM@ 30psi
Catalog Item
35"
1800 lbs
350 lbs
2500 lbs
*Does not include operating space requirements. For easy and safe operation, there should
be a minimum of 2ft on each side and 4ft in front of the system.
Siemens
Water Technologies
BACK
92
Med-RO® Reverse Osmosis Medical
Systems RX Series
For Dialysis Applications Requiring From 1.5 to 15 gpm
Med-RO® Reverse Osmosis medical systems are specifically designed for hemodialysis water
treatment applications. Our Med-RO® RX Series offers you the greatest flexibility possible
from a standard system. The control system is an easy-to-use advanced microprocessor
based system. The Med-RO® RX series product flow ranges from 1.4 to 15 gpm.
Features that make the difference include:
•
Manufactured for hemodialysis water treatment applications, FDA registration
•
Easier to clean – “full fit” thin film composite RO membranes mean less bacterial
contamination and less biofilm buildup
•
Easy-to-use programmable controls for convenience
•
Small footprint requires minimal space
•
Reject recycle maximizes water recovery and minimizes waste
•
Clean-in-place connections minimize disinfection downtime and overall cleaning time
•
Systems manufactured at a QSR/ISO 9001 compliant registered facility
•
Used with Siemens registered medical pretreatment components
•
Registered with Health Canada as a medical device
General Specifications
RO Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conductivity Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow Indicator (Product) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow Indicator (Reject) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow Indicator (Recycle) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stainless steel
Epoxy coated 3/4” MNPT
Rotameter, PVC/acrylic construction, 3/4” FPT connections
Microprocessor, NEMA 4X enclosure
Siemens
Water Technologies
BACK
93
Model Number
RX01
Product Flow* (gpm) . . . . . .
Feed Flow (gpm) . . . . . . . . .
Reject Flow (gpm) . . . . . . . .
Reject Recycle (gpm). . . . . .
Connection
Feed Inlet . . . . . . . . . . . . . . .
Product Outlet . . . . . . . . . . .
Reject to Drain Outlet . . . . .
Waste Drain–max gpm. . . . .
Floor Drain . . . . . . . . . . . . . .
Membranes
Membrane/Vessel . . . . . . . .
Membrane Quantity . . . . . . .
Membrane Type . . . . . . . . . .
RO Vessels
Vessel Array . . . . . . . . . . . . .
Electrical Motor (hp). . . . . . .
System Dimensions**
HxWxD
inches . . . . . . . . . . . . . .
cm. . . . . . . . . . . . . . . . .
Shipping Weight
lb (kg) . . . . . . . . . . . . . .
RX02
RX06
RX08
RX09
RX12
1-1⁄2” flange
1-1⁄2” flange
1-1/2” flange
1-1/2”” flange 1-1/2” flange
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
2.8
5.6
8.0
6.9
8.3
A floor drain (in addition to a waste drain) should be supplied for general maintenance
1-1/2” flange
3/4” NPT
3/4” NPT
9.3
1-1/2” flange
3/4” NPT
3/4” NPT
13.3
1-1/2” flange
3/4” NPT
3/4” NPT
16.0
1-1/2” flange
3/4” NPT
3/4” NPT
20.0
1
1
RO-4040-FF
1
2
RO-4040-FF
1
3
RO-4040-FF
1
4
RO-4040-FF
1
5
RO-4040-FF
1
6
RO-4040-FF
1
8
RO-4040-FF
1
9
RO-4040-FF
1
12
RO-4040-FF
1
5
1:1
5
1:1:1
5
1:1:1:1
5
1:1:1:1:1
5
1:1:1:1:1:1
5
2:2:1:1:1:1
10
3:2:2:1:1
10
3:3:2:2:1:1
10
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
76x34x42
193x86x107
475 (215)
500 (226)
540 (244)
550 (249)
590 (267)
630 (285)
750 (340)
800 (362)
825 (362)
1.4
2.8
1.4
7.0
RX03
2.8
5.6
2.8
5.0
RX04
4.0
8.0
4.0
4.0
5.2
6.9
1.7
6.0
RX05
6.2
8.3
2.1
6.0
7.0
9.3
2.3
6.0
10.0
13.3
3.3
8.0
12.0
16.0
4.0
11.0
15.0
20.0
5.0
10.0
*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.
**Does not include servicing space requirements.
STANDARD PRODUCT ORDERING INFORMATION
Med-RO® Part Number Matrix / Single Pass Reverse Osmosis Units
RX
01
Med-RO® MODEL
1 VESSEL
4 VESSELS
06
6 VESSELS
09
12
3 VESSELS
5 VESSELS
8 VESSELS
9 VESSELS
12 VESSELS
RX OPTION DESIGNATIONS
AX
208VAC 3PH 60HZ
CX
460VAC 3PH 60HZ
BX
DX
EX
AX
RO VESSEL QUANTITY DESIGNATION
04
08
04
centrifugal pump
2 VESSELS
05
RX
Vertical w/ controller, medical RO,
02
03
MRO
230VAC 3PH 60HZ
380VAC 3PH 50HZ
575VAC 3PH 60HZ
BACK
Siemens
Water Technologies
94
GAUGES
Pressure Gauges
Liquid pressure gauges are designed to resist pulsation, shock, vibration, weather and
most corrosive atmospheres. They are ideally suited for a broad range of plant,
hydraulic and fluid power applications.
• Offered with a 2.5" dial face, stainless steel exterior, and liquid filled (glycerine)
with a 1/4" NPT stem mount
• Available with brass or stainless steel internals (gauges used on DI or softened
water must have stainless steel internals)
• Sanitary gauges are 316 stainless steel, glycerine filled and include a 1.5" tri-clamp
connection
Catalog No.
PGBR03025
PGBR06025
PGBR10025
PGBR16025
PGSS03025
PGSS06025
PGSS10025
PGSS16025
Description
Brass internals; range 0-30 psi
Stainless steel internals; range 0-30 psi
Catalog No.
PGSS40025
PG3A06035
PG3A10035
PG3A16035
PG3A06045
PG3A10045
PG3A16045
Description
3.5" face; sanitary; 0-60 psi
Siemens
Water Technologies
BACK
95
GAUGES
Temperature Gauges
Siemens offers a simple, bimetal temperature gauge designed to measure
temperature in most non-sanitary applications. This gauge is constructed
of 304 stainless steel, has a 3" dial face, a 4" long stem, with a 1/2"-14
NPT stem mount.
Catalog No.
TGNS20030
Description
Non-sanitary; range 0-200°F
Siemens
Water Technologies
BACK
96
PureFit™ High Purity
Water Treatment Systems
Flow Rates makeup from 2-20 gpm, recirculating up to 72 gpm
The PureFit™ line of packaged systems is designed to address most common types of
applications for high purity water with effluent resistivity of 16 megohm-cm or
higher.
PureFit™ systems include pretreatment, deionization, distribution and polishing, as
packaged systems and are offered in a variety of configurations. Each system is
completely pre-assembled at the factory, with only a few subassemblies that must be
reconnected in the field. The only additional items required are service DI (and for
HPX, carbon) bottles, that are supplied by the Branch. Equipment can be shipped in
within 7-8 weeks after receipt of order, and field assembly and startup can often be
accomplished in as little as 1-2 weeks.
HPW: systems with make-up flow rates up to
8 gpm feature vertical RO pressure vessels
with one element per housing; systems with
make-up flow rates 12 gpm or higher
feature horizontal RO arrays with three RO
elements per housing. An antiscalant feed
system is available in lieu of softeners on all
HPW systems. Equipment layout is
extremely compact.
HPC: systems feature many of the same
components used in the HPW systems but
also include a softened water break tank and
continuous electrodeionization instead of
make-up service deionization. The CDI
platform also includes a UV sterilizer to
minimize any biological buildup in the
recirculating make-up stream during periods
of low DI water demand.
HPX: systems feature service deionization
instead of RO as the primary means of TDS
reduction. As the SDI units can handle a
wide range of flow rates a DI water storage
tank is generally not required and the
system footprint can be greatly reduced. Prefilters and distribution components are
combined on one platform that sits adjacent
to SDI and carbon bottles.
Siemens
Water Technologies
BACK
97
PureFit™ High Purity
Water Treatment Systems
Flow Rates makeup from 2-20 gpm, recirculating up to 72 gpm
• Powder-coated steel frames
• PLC based control system
• Full factory pre-assembly including piping, wiring, valves, hoses, cartridge filters,
and other material items necessary for initial startup in the field
• PVC pretreatment, socket-fusion polyproylene (PP) downstream of the DI storage
tank on HPW and HPC systems, PVC post-treatment on HPX systems
• Documentation: Operations & Maintenance Manual, System drawings including
Process & Instrumentation Diagram and Electrical Schematics
• Fast delivery and installation with pre-manufactured systems
Contact a Siemens representative for detailed specifications.
In accordance with Siemens policy for continual product development and improvements, we reserve the
right to change the product information within this literature at any time, without notice.
BACK
Siemens
Water Technologies
98
USF™ Ion Exchange Resin
The selection, application and supply of ion exchange resins are critical to the
performance and cost effectiveness of your water treatment system. For over 80 years,
we have pioneered the development and application of a better ion exchange resin.
Siemens USF™ resin is produced by the leading manufacturers to meet our stringent,
performance based specifications. These standards are higher than those currently
used by the manufacturers in testing their own products. With the purchase of USF™
resin, you are assured of the highest quality product at a competitive price.
Advantages of Choosing USF™ resin:
•
Superior quality – resins are tested to meet stringent performance specifications
•
Strict QA/QC of our select manufacturers based on their ability to meet the
performance specifications consistently
•
Competitive price with lower operating and life cycle costs
•
Equal to or better performance for the dosage
•
Process performance guarantees available
•
Extensive technical and resin application support
•
Annual resin analysis – No Charge
•
Custom packaging to meet your volume needs
•
Certificates of Analysis, Certificates of Conformance and shelf life statements are
available
•
QA/QC meets ANSI/ASME NQA-1, 10CFR50 (Appendix B), and 10CFR21
compliance to Nuclear Safety requirements
See page 99 for catalog information.
See page 219 for turnkey ion exchange resin services.
Siemens
Water Technologies
BACK
99
USF™ Ion Exchange Resin and Media
Ion Exchange Resins
PRODUCT NAME
CATALOG #
DESCRIPTION
USF C-211 (NA)
109104110
8% cross-linked, standard sodium form
USF C-211 (H)
109104111
8% cross-linked, standard hydrogen form
USF C-361 (NA)
109000902
10% cross-linked, more durable cation, sodium form
USF C-361 (H)
109000010
10% cross-linked, more durable cation, hydrogen form
USF C-381 (NA)
109001162
20% cross-linked, macroporous cation, sodium form
USF C-381 (H)
109000050
20% cross-linked, macroporous cation, hydrogen form
109004281
Acrylic weak acid cation macroporous, hydrogen form
USF A-244 (CL)
109151000
Type II strong base, gel standard anion, chloride form
USF A-284 (CL)
109167502
Type I strong base, gel standard anion, chloride form
USF A-464 (CL)
109183201
Type I strong base, porous gel standard anion, chloride form
USF A-674 (CL)
109001160
Type I strong base, macroporous standard anion, chloride form
USF A-714 (CL)
109004968
Strong base acrylic gel anion, chloride form
USF A-399 (FB)
109183401
High capacity styrenic macroporous weak base anion, free base form
USF A-444 (FB)
109000706
High capacity acrylic gel weak base anion, free base form
USF C-361 MEG (H)
3R0100029
10% cross-linked cation, hydrogen form, specially processed
to meet tight semiconductor industry requirements
USF C-361 MEG PPQ (H)
3R0100028
Extremely low sodium processed upgrade of the C-361 MEG (H).
USF A-464 MEG (OH)
3R0100652
Type I strong base, porous gel anion, hydroxide form, specially
processed to meet tight semiconductor industry requirements
USF A-464 MEG PPQ (OH)
3R0100653
Extremely low sodium processed upgrade of the A-464 MEG (OH).
USF NR-30 MEG
3R0101082
1:1 chemical equivalent mix of C-361 MEG (H) and A-464 MEG (OH)
USF NR-30 MEG PPQ
3R0101086
1:1 chemical equivalent mix of C-361 MEG PPQ (H) and A-464 MEG PPQ (OH)
Strong Acid Cation
Weak Acid Cation
USF C-271 (H)
Strong Base Anion
Weak Base Anion
MEG Grade Resins
Cation
Anion
Mixed Bed
Please contact Technical Support at, 800.875.7873 ext 5000 for more information.
Siemens
Water Technologies
BACK
100
Filter Media and Activated Carbon
Quartz
USF No. 20 Quartz
110001500
Underlayment support bed and/or filter media: 0.4-0.5 mm
USF No. 7 Quartz
110001401
USF No. 4 Quartz
110001302
USF 1/4 x 1/8 Quartz
110001203
110001104
110001005
USF No. 8 Garnet
110400002
Filter media: 2.10-2.50 mm
USF No. 8-12 Garnet
110400000
USF No. 30-40 Garnet
110400001
110201001
Manganese greensand used for iron removal
110100997
Coarse filter media
USF ORC Carbon
110350006
12x40 mesh bituminous activated carbon
USF Acid Washed Carbon
110350008
Acid washed 12x40 mesh bituminous activated carbon
USF Coconut Shell Carbon
110350009
Coconut Shell 12x40 mesh activated carbon
Garnet
Manganese Greensand
USF Greensand
Anthracite
USF Anthrafilt
Activated Carbon
Siemens
Water Technologies
BACK
101
Cross Reference Guide
Siemens is the largest distributor of ion exchange resin. We are able to supply
you resin from all of the leading manufacturers, and are the largest stocking
distributor of Dowex brand resin.
USF™ Brand
Amberlite Rohm &
Haas
Lewatit
LANXESS
Ionac®
Sybron
Diaion®
Mitsubishi
Dowex®
Dow
Purolite®
Weak Acid Cation
USF C-271
IRC-76
USF C-281
IRC-86
MAC-3
(Marathon® MAC-3)
CNP-80
CC
WK-40
C-106
C-105
Strong Acid Cation
USF C-211
IR-120
(Amberjet® 1200)
(MonoPlus® S-100)
C-249
SK-1B
HCR-S
(Marathon® C)
C-100
USF C-361
IR-122
(Amberjet® 1500)
(MonoPlus® S-200)
C-250
SK-110
HGR-W2
(Marathon® C-10)
C100X10
USF C-381
IR-200
(MonoPlus® SP-112)
PK-228
(Marathon® MSC)
C-150
WA-30
(Marathon® WBA-2)
A-100
Weak Base Anion
USF A-399
IRA-96
(MonoPlus® MP-64)
USF A-444
IRA-67
VP OC 1072
A-845
Strong Base Anion
USF A-244
IRA-410
(Amberjet® 4600)
(MonoPlus® M-600)
ASB-2
SA-20A
SAR
(Marathon® A2)
A-300
USF A-284
IRA-400
(Amberjet® 4200)
(MonoPlus® M-500)
ASB-1
SA-10A
SBR-C
(Monosphere® 550A)
A-600
USF A-464
IRA-402
(Amberjet® 4400)
ASB-1P
SA-12A
SBR-P
(Marathon® A)
A-400
USF A-674
IRA-900
(MonoPlus® MP-500)
A-641
PA-312
(Marathon® MSA)
A-500
A-714
IRA-458
VP OC 1071
A-850
Mixed Bed
USF TM-9
NRW-37
USF EDM
USF NR-6
IRN-150
SM 94
USF NR-14
NM-60
(Marathon® MR-3)
NM-73
NRW-37
USF NR-30
EX MB
( ) indicates Uniform Particle Size Equivalent
Siemens
Water Technologies
BACK
102
ION EXCHANGE WASTEWATER SYSTEMS
Wastewater Ion Exchange Systems
Siemens Water Technologies designs and maintains systems to purify metal finishing
rinses, contaminated groundwater, printed circuit board rinses and many other metal
bearing streams. Siemens’ Wastewater Ion Exchange (WWIX) service utilizes ion
exchange resins and other media selected to remove specific ionic contaminants from
groundwater, industrial wastewater, and process water for recycle. DOT approved
vessels containing the selected resin or media treat your water until the capacity is
reached. Once exhausted, the WWIX vessels are removed and replaced with fresh, DOTcompliant vessels and returned to service. Exhausted vessels are returned to our
processing facility where the contaminants are removed from the media/resin.
Your specific requirements are evaluated on an individual basis to determine the system configuration that best meets
your current and future needs. The system components are selected based upon your specific reuse or discharge
requirements. If your needs change, our wastewater treatment systems are flexible – we can simply change the media
types and/or tank size saving you significant capital expense.
Systems include resin/media options matched to your treatment needs:
• Granular Activated Carbon – Removes potential organic foulants as pretreatment to
the resins
• Strong Acid Cation Resin – Removes soluble cations (Ca, Ni, Zn, Mg, Cu, etc.)
• Strong Base Anion Resins – Removes soluble anions (SO4, Cl, CN, Cr6, etc.)
• Mixed Bed Resin – For polishing of low level dissolved ionic waters (e.g. rinse applications)
• Metals Specific Resins – For removal of specific metals (Cu, As, Zn, etc.)
• Lead Resins – For removal of Pb from wastewaters (sacrificial media)
Siemens national service network provides the local service needed to simplify the operation of your WWIX system. A
simple phone call is all that is required to get fresh canisters delivered to your site and the spent units picked up and
returned to our RCRA permitted plant for processing. All of our tanks are DOT approved for the transportation of
hazardous waste. See page 217 for more details on this service.
Resin Capacity (ft3)
0.45
1.2
3.5
12
30
Flow Rate (Min.–Max.)
0.5–1
1–3
2–10
10–35
25–75
8”dia./20.5”
8”dia./48”
14”dia./50”
29”sq./71.5”
36”sq./75.5”
Dimensions, Base/Height
Siemens
Water Technologies
For more information, contact 800.525.0658.
BACK
ION EXCHANGE WASTEWATER SYSTEMS
103
AquaSaver™ Chemical Feed and Pump Skids
AquaSaver™ control skids are totally integrated, skid-mounted treatment
stations for pre ion-exchange water conditioning. The pH Contol Skid adjusts
the pH to the proper level before transfer to the ion exchange system, while
the Booster Skid supplies consistent process water flow and pressure,
optimizing the operation of downstream ion-exchange systems.
SPECIFICATIONS
Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . .
1 to 75 gpm
pH Monitor . . . . . . . . . . . . . . . . . . . . . . . .
Strantrol® 880
PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allen-Bradley®
Chart Recorder . . . . . . . . . . . . . . . . . . . . .
Optional
Chemical Pumps . . . . . . . . . . . . . . . . . . .
Siemens or LMI®
Alarms Beacon and Audible Alarm for out of spec conditions
For more information, contact 800.525.0658.
Siemens
Water Technologies
BACK
104
LABORATORY WATER SYSTEMS
PURELAB® Ultra
Water Purification System
State-of-the-art intelligent water system delivers ASTM Type I ultrapure water for
critical biological and analytical applications. Designed to ensure the highest quality
water with the most advanced smart monitoring system.
Standard Features and Benefits
• 18.2 Megohm purity water up to 2.0 lpm
• Direct on-line real time TOC monitoring (Analytic and Genetic)
• Unique CID (cartridge identification) technology provides full traceability and
history of purification cartridge packs for validation
• 5 models to choose from
• Worker polisher purification design reduces annual costs by 50%
• Programmable dispense with auto alarm and shut off prevents flooding
• Volumetric Profile Memory dispense
• Friendly consumable change-out reminders
PURELAB® ULTRA SYSTEM SPECIFICATIONS
Performance Specifications*
MODEL
PURELAB Ultra Scientific
PURELAB Ultra Ionic
PURELAB Ultra Analytic
PURELAB Ultra Bioscience
PURELAB Ultra Genetic
System Dimensions
Resistivity
Flow Rate (lpm)
18.2
18.2
18.2
18.2
18.2
up to 2.0
up to 2.0
up to 2.0
up to 2.0
up to 2.0
* Specifications based on RO pretreatment
** < 1 CFU/ML w/0.2µm filter
TOC (ppb)
3-10
3-10
1-2
3-10
1-3
Endotoxins
EU/ml
NA
NA
NA
<0.001
<0.001
Bacteria
CFU10/ml
<1**
<1
<1
<1
<1
Weight lbs
HxWxD (in)
MODEL
PURELAB Ultra Ionic
19x16x14
19x16x14
19x16x14
19x16x14
19x16x14
38
39
40
39
40
Feed Water Parameters
Purification Technology
Maximum Fouling Index
Maximum Conductivity (RO Feed)
Minimum Resistivity (SDI Feed)
Maximum TOC
Maximum Free Chlorine
Maximum Carbon Dioxide
Maximum Silica
Particulates
Temperature
Feedwater Flow Rate
Maximum Pressure
Minimum Pressure
<1*
MODEL
Dual
50 µS/cm
Purification
Cartridges
1 MΩ-cm
50 ppb
l
<0.05 ppm
PURELAB Ultra Ionic
l
30 ppm
l
2 ppm
l
Down to 0.2 µm filtration
l
1-40 °C
Maximum requirement 130 lph
10 psi
1 psi or flooded suction to the
recirculation pump
Power Requirements
100-240 VAC, 50-60 Hz (all models)
*A 0.2µm prefilter recommended for all non-RO feeds.
UV 254nm
l
UV
254/185nm
l
l
UF
Ultrafilter
l
l
Siemens
Water Technologies
BACK
UMF Ultra
Microfilter
l
l
TOC
Monitor
l
l
105
‘
PURELAB® Ultra
Water Purification System
Applications
Invitro Fertilization
2D Electrophoresis
Glassware washing
HPLC
PURELAB Ultra
Scientific
PURELAB Ultra
Ionic
l
l
Immunology
Microbiology
Buffer Preparation
Toxicology
l
l
GC/MS
Tissue Culture
l
l
Flameless AA
Ion Chromatography
Protein/Peptide
Sequencing
Monoclonal
Antibody production
Endotoxin analysis
DNA/RNA Research
PCR
l
ICP-MS
Protein purification
Atomic Absorption
ICP-ES
PURELAB® Ultra Systems
MODEL
PURELAB Ultra Ionic
PURELAB Ultra Analytic under-bench
system (with remote control station and
dispense gun)
PURELAB Ultra Genetic under-bench
system (with remote control station and
dispense gun)
PURELAB Ultra
Bioscience
PURELAB Ultra
Genetic
l
l
l
l
l
l
l
l
TOC Analysis
Mammalian Cell Culture
PURELAB Ultra
Analytic
l
l
l
l
l
l
l
l
Consumables and Accessories
Catalog Number
ULXXXSCM2
ULXXXIOM2
ULXXXANM2
ULXXXBSM2
ULXXXGEM2
ULRSXANM2
ULRSXGEM2
Service and Maintenance packages available
DI (Deionization) Cartridges must be ordered separately
Consumables
Sanitization Tablets
UV Lamp 254nm (for Ionic)
UV Lamp 185nm/254nm
Ultra microfilter (0.05µm)
Ultrafilter (5,000 MWCO)
Point-of-Use Filter (0.2µm)
Labpure S1 DI Cartridge-RO Feed
Labpure S2 DI Cartridge-SDI Feed
Labpure S3 DI Cartridge-Low Ionic
Labpure S4 DI Cartridge-Low TOC
CT1
LC105
LC118
LC109
LC151
LC134
LC182
LC183
LC184
LC185
Accessories
Pressure Regulator Valve Inlet
Wall Mounting Kit (PURELAB Ultra Unit)
RS232 Printer Kit
Installation Kit (PURELAB Ultra Unit) (supplied)
Remote Dispense Station (including dispense gun)
Integral Dispense Gun (PURELAB Ultra Unit)
Remote Control Station (PURELAB Ultra Unit)
Open Circuit Ring Main Kit
Closed Circuit Ring Main Kit
Pressure Regulator <60 psd
SDIRG2613*
LA622USA
LA618
LA642
LA643
LA644
LA645
LA646
LA647
LA652
Storage reservoirs are located on pages 34.
* For feed pressure above 60 psig, use pressure regulator LA575.
Note: Installation kit supplied with all Ultra systems
PURELAB® Systems Validation Support
Siemens Water Technologies offers validation documentation support packages for all
PURELAB® Ultra water purification products. Validation support manuals include
Installation Qualification (IQ), Operational Qualification (OQ) documentation and other
quality certification as required to complete validation of the water system. Our service
engineers are fully trained to perform certification as required to complete the
validation of water system.
BACK
Siemens
Water Technologies
106
‘
PURELAB® Classic Water Polishing Systems
Cost-efficient alternative for ASTM Type I purity water for general analytical and biological
applications. The PURELAB® Classic System offers reliability, and uncompromising
water quality.
• Easy front loading cartridges
• Complete sanitization of all wetted parts
• Unique CID Technology provide full traceability and history of purification
cartridge packs for validation
• Dual wavelength UV — 185 nm and 254 nm (PURELAB Classic UV Model)
• 5000 Dalton UF Module for pyrogen removal (PURELAB Classic UF Model)
• Wall or bench mountable
• Applications include HPLC, ICP, ICP/MS, GC, IC, AA, cell culture and molecular
biology
PURELAB® CLASSIC SYSTEMS
MODEL
PURELAB Classic DI
PURELAB Classic UV
PURELAB Classic UF
PURELAB Classic UV/UF
Resistivity
Flow Rate†
(lpm)
TOC*
(ppb)
Endotoxins**
EU/ml
Bacteria**
CFU/ml
18.2
1.5
<3-10
NA
<1
18.2
1.5
<1-3
NA
<1
18.2
1.5
<3-10
<.001
<1
18.2
1.2
<1-3
<.001
<1
* Depends on feed water conditions.
** Based on regular sanitization and proper maintenance of the system.
† Based on 1 bar feed pressure.
System Dimensions
MODEL
HxWxD
(in)
PURELAB Classic DI
19x16x14
PURELAB Classic UV
19x16x14
PURELAB Classic UF
19x16x14
PURELAB Classic UV/UF 19x16x14
Weight
(lbs)
32
33
32
33
Operating
Temperature
PURELAB Classic DI
1–40˚ C
PURELAB Classic UV
1–40˚ C
PURELAB Classic UF
1–40˚ C
PURELAB Classic UV/UF 1–40˚ C
MODEL
Inlet Connections
8mm (5/16”) OD-Quick Connect
Inlet
Pressure
1–10 psig
1–10 psig
1–10 psig
1–10 psig
Power
Requirements
110–240 V 50/60 Hz
110–240 V 50/60 Hz
110–240 V 50/60 Hz
110–240 V 50/60 Hz
Free Chlorine
(ppm)
<0.05
<0.05
<0.05
<0.05
Siemens
Water Technologies
BACK
107
‘
PURELAB® Classic Water Polishing Systems
Consumables
Chlorine Sanitization Tablets
Labpure S5 DI Cartridge
UF Membrane
UV Lamp 185/254 nm
0.2 µm Final Filter
CT1
LC186
LC169
LC170
LC134
Accessories
Integral Dispense Gun
Remote Dispense Station
Printer Kit
Sanitization by-pass block
Pressure Regulator Valve (Feed Water Pressures
>4 bar (60 psi))
Pressure Regulator Valve (Feed Water Pressures
>0.7 bar (10 psi))
Pressure Regulator <60 psi
Wall Mount Kit
Remote Dispense Station with Dispense Gun
Open Ring Main Kit
Closed Ring Main Kit
Installation Kit
Composite Vent Filter
LA644
LA645
LA618
LA698
LA575
LA652
SDIRG261
LA622USA
LA643
LA646
LA647
LA642
LC136M2
PURELAB® CLASSIC SYSTEM
MODEL
PURELAB Classic DI
PURELAB Classic UV
PURELAB Classic UF
PURELAB Classic UV/UF
Catalog Number
CLXXXDIM2
CLXXXUVM2
CLXXXUFM2
CLXXUVFM2
Purification Cartridges must be ordered separately.
UF cartridge and UV lamp supplied.
Siemens
Water Technologies
BACK
108
‘
PURELAB® UHQ Systems
Lightweight, compact, portable ultrapure water system for the modern laboratory requiring up to
15 liters per day of 18.2 Megohm ASTM Type I water. The PURELAB® UHQ System delivers
ultrapure water from a tap feed or pretreated feed source for demanding laboratory applications.
• Recirculation feature maintains optimum water quality and inhibits bacterial growth
• Specially conditioned ion exchange resin ensures absolute ionic purity
• UV reactor cell reduces microorganisms and TOC levels
• 0.05 µm absolute filter protects microbore columns in analytical instruments
• Quality meter continually displays resistivity of water
• 4 liter storage tank capacity
• Supplied complete with all consumables
Application
HPLC
Atomic Absorption
Spectroscopy
ICP/MS
PURELAB® UHQ SYSTEM SPECIFICATIONS
Ion Chromatography
PURELAB
UHQ II
l
l
l
l
PURELAB
UHQ PS
l
l
l
l
Performance Specifications
MODEL
PURELAB UHQ II w/RO
PURELAB UHQ PS w/out RO
* When fed with reverse osmosis (RO) water
System Dimensions
MODEL
PURELAB UHQ II
PURELAB UHQ PS
Particles
TOC (ppb)
<20
<20*
HxWxD (in)
<0.05 µm
<0.05 µm
Shipping Weight (lbs)
16x9x16
16x9x16
PURELAB UHQ II
PURELAB UHQ PS
Feedwater quality
PURELAB® UHQ SYSTEMS
MODEL
Operating Temperature
Potable water free from
turbidity & organics (max. free
chlorine <0.1 ppm
Prepurified, <20 µS/cm and
filtered to 0.2 µm or less
PURELAB UHQ II
Type I water system w/RO
PURELAB UHQ PS
Type I water system w/out RO
Inlet Connections
3/4" NPT or 3/8" tube
3/4" NPT or 3/8" tube
22
22
PURELAB® UHQ Feed Water Parameters
MODEL
Output/per 8 hr day
when fed w/RO water
15 liters
25–40 liters
Bacteria
CFU/ml
<1
<1
Power Requirements
110/115 V 60 Hz
110/115 V 60 Hz
Inlet Pressure
4–35˚ C
Max 90 psi/Min 30 psi
4–35˚ C
Max 90 psi/Min 30 psi
Catalog Number
UHQ000IIXX11503
UHQ000PSXX11503
Purification Pack (2 organic absorption cartridges and 2 ion exchange cartridges)
Reverse Osmosis Cartridge
0.05 µm Ultra Microfilter
UV Lamp
Siemens
Water Technologies
BACK
UHQPACKA
UHQ5
LC109
LC104
UHQ4
109
‘
MODULAB® High Flow Systems
Modular polishing system provides up to 18.2 Megohm quality water on demand.
The MODULAB® High Flow System is offered in three models: low TOC (Total
Organic Carbon), low bacteria, low pyrogen systems.
Features and Benefits
• High capacity, low TOC cartridges
• Flow rates up to 14 lpm
• Dual wavelength UV sterilization
• Wall mountable
• Up to 18.2 MΩ-cm water
MODULAB® HIGH FLOW SYSTEMS
MODEL #
MHF0ORG1
MHF0SMF2
MHD0SMF5
CARTRIDGES
MLHF20DI01
MLHF20CAR1
MLHF20OS01
FCUF020S2 (1/PK)
MLMF020S2 (2/PK)
FCUF020S05
CONSUMABLES
BULBUV185
MLHFTOC1KIT
MLHFB102
MLHFUF05
PRODUCT
Modulab High Flow System Low TOC
Modulab High Flow System Bio Model
Modulab High flow System UF Model
Carbon Cartridge
Mixed Bed Cartridge
Organic Removal Cartridge
0.2 µm, Filter Cartridge
0.2 µm, Filter Cartridge
0.05 µm, Micro Ultrafilter Cartridge
UV Lamp
Start-up Kit (Low TOC)
Start-up Kit (Bio Model)
Start-up Kit (UF Model)
General Specifications
Min Feed Pressure
Max Feed Pressure
Min Feed Temperature
Max Feed Temperature
Physical Specifications
Length, in (cm)
Depth, in (cm)
Height, in (cm)
UV Bulb Service Clearance, in (cm)
Utility Requirements
Electrical
Low voltage service, Single Phase
Breaker required per Code
Feed Water
0.5 psig
60 psig
41˚F (5˚C)
100˚F (37.7˚C)
43 (109)
8.5 (22)
39 (100)*
6 (16) Front
115 VAC
15 AMP
RO or DI water
* Requires an additional 4” in height to allow changing of cartridges
MODULAB® System Specifications
Product Water Quality
Min. Flow Rate
Max Flow Rate
Resistivity
Total Organic Carbon (TOC)
Heavy Metals
Bacteria
Endotoxin
2 lpm (0.5 gpm)
Up to 14 lpm (3.7 gpm)
Up to 18.2 MΩ-cm @ 25˚C
<15 ppb*
<0.10 ppb
<10 cfu/ml**
<0.05 EU/ml**
* With organic Removal Cartridge installed and RO (reverse osmosis) feed water.
** With Sub-micron or UF (ultrafiltration) Filter Cartridge installed as specified.
Note: Specifications are based on a RO feed with recirculation.
Siemens
Water Technologies
BACK
110
‘
PURELAB®
Option-S Water Purifiers
The PURELAB® Option-S System combines pretreatment, reverse osmosis, and ionic/organic
removal in a single unit to deliver better than single distilled quality water from a potable water
source. With 4 models to choose from, the PURELAB® Option-S System is ideally suited for
general laboratory analyses and as pretreatment to ultrapure water polishing units.
• Up to 10 Megohm purity water
• Cartridge change indicator
• Microprocessor controlled system management with continuous water quality
monitoring
• Data collection capabilities through RS232 interface
• Adjustable audio-visual alarms
• Upgradable to higher flow rates
PURELAB® OPTION-S SYSTEM SPECIFICATIONS
MODEL
PURELAB Option-S 7/15
Bacteria*
CFU/ml
Resistivity MΩ-cm TOC (ppb)
<30
<50
1–10
1–10
* Based on regular sanitization and proper maintenance of the system
System Dimensions
MODEL
PURELAB Option-S 7
PURELAB Option-S15
PURELAB Option-S 30
PURELAB Option-S 60
HxWxD (in)
MODEL
Feed
Water
Potable
Potable
Power Requirements
110–240 V 50- 60 Hz
110–240 V 50- 60 Hz
110–120 V 60 Hz
110–120 V 60 Hz
29.8
32
114.6
116.8
Maximum
FI
10
10
Max.
Conductivity
µS/cm
1400
1400
7 or 15
30 or 60
Neutral
Neutral
Weight (lbs)
18.2x16.2x8.3
18.2x16.2x8.3
29.2x22.5x12.6
29.2x22.5x12.6
NA
<1
Flow Rate
LPH @ 25˚ C
pH
Max.
Free Chlorine
(ppm)
<0.5
<0.5
Temperature
1–35˚ C
1–35˚ C
Max. Pressure
w/out booster
pump (psi)
90
N/A
Max. Pressure
w/booster
pump (psi)
30
N/A
*Fouling Index
Application
Glassware
Washing/Rinsing
Reagent Preparation
Buffer Preparation
General Chemistry
Qualitative Analyses
Feed to Environmental
Cabinets
PURELAB
Option-S 7/15
l
l
l
l
l
l
PURELAB
Option-S 30/60
l
l
l
l
l
l
Siemens
Water Technologies
BACK
111
‘
PURELAB®
Option-S Water Purifiers
PURELAB® OPTION-S SYSTEM
MODEL
PURELAB Option-S 7
PURELAB Option-S 7 w/booster pump
PURELAB Option-S 15
PURELAB Option-S 15 w/booster pump
PURELAB Option-S 30
PURELAB Option-S 60
Catalog Number
OS007XXM1
OS007BPM1 (for feed waters less than 60 psi)
OS015XXM1
OS015BPM1 (for feed waters less than 60 psi)
OPT030XXXX11503
OPT060XXXX11503
*Reservoir is required with Option-S (sold separately - see below)
All units come complete with installation kit and full set of cartridges
Option-S 7/15
Pretreatment Cartridge
RO module (7.5 lph)
Purification Cartridge
Wall Mounting Bracket
Pressure Regulator Valve
Booster Pump Kit
Flow Upgrade Kit (7–15 lph)
RS232 Printer Kit
Remote Control Station
Installation Kit (supplied)
Remote Dispensing Valve
LC140
LC143
LC141
LC136M2
LA622USA
CT1
LA512
LA609
LA604
LA618
LA624 (7/15 units only)
LA513
LA521
Option-S 30/60
5 µm Carbon Filter
RO Module (30 lph)
RO Module (60 lph)
UV Lamp
Cleaning Solution Elgalite RF
Flow Upgrade Kit 30–60 lph
LC123
LC115
LC119
LC114
LC105
LA593USA
SOLU30966
LA562
LA545
Storage Reservoirs - Required with system
Option-S 7/15
25 Liter Reservoir
40 Liter Reservoir
75 Liter Reservoir
DV 35 Docking Vessel
DV 35 Liter Mounting Bracket
Wall Mounting Kit (25/40 Liter Reservoir)
Wall Mounting Kit (75 Liter Reservoir)
LA611
LA612
LA613
LA620
LA591USA
LA591USA
LA592USA
Option-S 30/60
40 Liter Reservoir
75 Liter Reservoir
LA587
LA590
LA591USA
LA592USA
Note: Installation kit is supplied with DV Reservoirs
Siemens
Water Technologies
BACK
112
‘
PURELAB®
Option-R Water Purifiers
The PURELAB® Option-R System features all the technologies of the S series units with the
added benefit of an integral recirculation feature to deliver better than double distilled
quality water from a potable water source. The PURELAB® Option-R System is ideally suited
for standard laboratory techniques and as pretreatment to ultrapure water polishing units
where TOC is a concern.
• 10 to 15 Megohm purity water
monitoring through unique GRID display (Option-R 7/15)
PURELAB® OPTION-R SYSTEM SPECIFICATIONS
MODEL
Resistivity
MΩ -cm
PURELAB Option-R 7/15
Bacteria*
CFU/ml
TOC*
(ppb)
<20
<50
10 to >15
1 to >15
System Dimensions
MODEL
HxWxD (in)
<1
<1
18.2x16.2x8.3
29.2x22.5x12.6
* Fouling Index
Application
Glassware
Washing/Rinsing
Cytology & Histology
Preparations
Immuno-Cytochemistry
Spectrophotometry
Electrophysiology
Electrochemistry
RIA/ELISA
Flame AA
General Purpose HPLC
PURELAB
Option-R 7/15
l
l
l
l
l
l
l
l
l
Neutral
Neutral
>0.2 µm
>0.2 µm
R7–39.8 : R15–41.9
R30–116.8 : R60–119
1400
1400
10
10
Potable
Potable
Particulates
Weight (lbs)
Max.
Max. Free
Feedwater Maximum Conductivity Chlorine
MODEL
µS/cm
(ppm)
FI*
pH
<0.5
<0.5
Temperature
1–35˚ C
1–35˚ C
Flow Rate
LPH @ 25˚ C
7/15
30/ 60
Power Requirements
110–240 V 50- 60 Hz
110–120 V 60 Hz
Pressure w/out
booster pump (psi)
90 max/60 min.
NA
Pressure w/booster
pump (psi)
30 max/flooded suction
NA
PURELAB
Option-R 30/60
l
l
l
l
l
l
l
l
l
Siemens
Water Technologies
BACK
113
‘
PURELAB®
Option-R Water Purifiers
PURELAB® OPTION-R SYSTEM
MODEL
PURELAB Option-R 7
PURELAB Option-R 7 w/booster pump
PURELAB Option-R 15
PURELAB Option-R 15 w/booster pump
PURELAB Option-R 30
PURELAB Option-R 60
Catalog Number
OR007XXM1
OR007BPM1 (for feed waters less than 60 psi)
OR015XXM1
OR015BPM1 (for feed waters less than 60 psi)
OPT030PLXX11503
OPT060PLXX11503
*Reservoir is required with Option-R (sold separately)
Option-R 7/15
RO module (7.5 lph)
Point-of-Use Filter (0.2µm)
UV Lamp
Booster Pump Kit
Flow Upgrade Kit (7 to 15 lph)
RS232 Printer Kit
Remote Dispensing Gun
LC140
LC143
LC141
LC136M2
LC145
LC105
LA622USA
CT1
LA512
LA609
LA604
LA618
LA513
Option-R 30/60
5 µm Carbon Filter
RO Module (30 lph)
RO Module (60 lph)
Point-of-Use Filter
UV Lamp
Flow Upgrade Kit 30 to 60 lph
LC123
LC115
LC119
LC114
LC106
LC105
LA593USA
SOLU30966
LA561
LA545
Option-R 7/15
25 Liter Reservoir
40 Liter Reservoir
75 Liter Reservoir
DV 25 Liter Docking Vessel
LA611
LA612
LA613
LA621
LA591USA
LC136M2
LA591USA
LA592USA
Option-R 30/60
40 Liter Reservoir
LA587
75 Liter Reservoir
LA590
LC136M2
Wall Mounting Kit (25/40 Liter Reservoir) LA591USA
Wall Mounting Kit (75 Liter Reservoir) LA592USA
Siemens
Water Technologies
BACK
114
‘
PURELAB®
Option-Q Water Purifiers
The PURELAB® Option-Q System produces ultra pure water with out the need for a prepurified feed supply. Available in two models depending on flow rate requirements, the
PURELAB® Option-Q System delivers up to 18 Megohm water on demand direct from tap
making it a cost effective choice for the laboratory.
• Up to 18.2 Megohm water from tap
• Cartridge change indicator to ensure optimal performance
• Adjustable audio-visual alarms for consumable change-outs
• RS232 interface for easily downloaded data collection
• Compact Design
• Comes complete with all consumables
PURELAB® OPTION-Q SYSTEM SPECIFICATIONS
Resistivity
MODEL
at 25˚C
PURELAB Option-Q 7/15
Up to 18.2 MΩ-cm
TOC
(ppb)
<10
Bacteria* CFU/ml with
POU Filter (optional)
<1
pH
Effectively Neutral
Particulates
POU Filter (optional)
>0.2 µm
Flow Rate
LPH@25˚C
7/15
System Dimensions
MODEL
PURELAB Option-Q 7
PURELAB Option-Q 15
HxWxD (in)
18.1x21.7x10.5
18.1x21.7x10.5
Feedwater Maximum
MODEL
FI*
PURELAB Option-Q 7/15
* Fouling Index
Application
Glassware
Washing/Rinsing
Reagent Preparation
Buffer Preparation
General Chemistry
Qualitative Analyses
Cabinets
Potable
10
Weight (lbs)
39.7
41.8
Max.
Conductivity
µS/cm
1400
Max. Free
Carbon
Chlorine Dioxide (ppm)
0.5
30
Temperature
1–35˚ C
Pressure w/out
booster pump (psi)
90 max/60 min.
Pressure w/booster pump
(psi)
30 max/flooded suction min.
PURELAB
Option-Q 7/15
l
l
l
l
l
l
Siemens
Water Technologies
BACK
115
‘
PURELAB®
Option-Q Water Purifiers
PURELAB® OPTION-Q SYSTEM
MODEL
PURELAB Option-Q 7
PURELAB Option-Q 7 BP w/booster pump
PURELAB Option-Q 15
PURELAB Option-Q 15 BP w/booster pump
Catalog Number
OQ007XXM1
OQ007BPM1
OQ015XXM1
OQ015BPM1
Consumables
Reverse Osmosis Cartridge Module
Ion Exchange Cartridge Pack
UV Lamp
Point of Use Filter
Pretreatment Filter
LC140
LC143
LC163
LC118
LC145
CT1
LC136M2
LC123
Accessories
Installation Kit (with saddle valve)
Pressure Regulator Valve (inlet)
Booster Pump Kit
Wall Mounting Kit (PURELAB Option-Q)
Flow Upgrade Kit (7–15l/hr)
RS232 Printer Kit
Remote Dispense Valve
Remote Dispensing Gun
Prefilter if Boost Pump Fitted
LA513
LA506
LA512
LA609
LA622USA
LA605
LA618
LA521
LA675
LA629
LA582
Option-Q 7/15
25 Liter Reservoir
40 Liter Reservoir
75 Liter Reservoir
LA611
LA612
LA613
LA621
LA591USA
LC136M2
LA591USA
LA592USA
Reservoir is required with Option-Q unit (sold separately)
Siemens
Water Technologies
BACK
116
‘
PURELAB® Prima 7/15/20
Reverse Osmosis Systems
PURELAB® Prima reverse osmosis water purification systems deliver Type III/IV primary
grade water from a tap feed. All models continuously monitor and display water quality
and operational parameters, ensuring a constant supply of pretreated quality water. Prima
systems are ideal as pretreatment to ultrapure water polishers or for routine glassware
washing.
• Advanced high flux TFC membranes
monitoring through unique GRID display
PURELAB® PRIMA 7/15/20 SYSTEM SPECIFICATIONS
Inorganics
MODEL
PURELAB Prima 7/15/20
TOC
(ppm)
Up to 98% rejection
(90% min)
<0.1
Bacteria*
CFU/ml
Organics
Particulates
>99% rejection
<5
>99% removal
Flow Rate
LPH @ 25˚ C
7 or 15 or 20
System Dimensions
MODEL
HxWxD (in)
18.2x16.2x8.3
MODEL
Feedwater
Potable
110–240 V 50- 60 Hz
Prima 7–25.4
Prima 15–27.6
Prima 20–28.7
Max.
Maximum Conductivity
FI*
µS/cm
1400
10
Power Requirements
Weight (lbs)
Max. Free
Chlorine (ppm)
<0.5
Temperature
1–35˚ C
Pressure w/out
booster pump
(psi)
90 max/60 min
Pressure
w/booster
pump (psi)
*Fouling Index
Application
Glassware Washing
Hydroponics
Pretreatment to
Ultrapure water systems
PURELAB
Prima 7
l
l
l
PURELAB
Prima 15
l
l
l
PURELAB
Prima 20
l
l
l
Siemens
Water Technologies
BACK
117
‘
PURELAB® PRIMA 7/15/20 SYSTEMS
MODEL
PURELAB Prima 7
PURELAB Prima 7 w/booster pump
PURELAB Prima 15
PURELAB Prima 20
All units include installation kit and full set of cartridges
Catalog Number
PR007XXM1
PR007BPM1 (for feed waters less than 60 psi)
PR015XXM1
PR015BPM1 (for feed waters less than 60 psi)
PR020XXM1
PR020BPM1(for feed waters less than 60 psi)
RO Module (7.5 lph)
RS232 Printer Kit
Pressure Regulator
Raw Water Booster Pump Kit
LC140
LC143
LA622USA
CT1
LA614
LA615
LA616
LA618
LA512
LA609
LA628
LA513
25 Liter Reservoir
40 Liter Reservoir
75 Liter Reservoir
DV 35 Docking Vessel
DV 35 Mounting Bracket
LA611
LA612
LA613
LA620
LA591USA
LC136M2
LA591USA
LA592USA
Siemens
Water Technologies
BACK
118
‘
PURELAB® Prima 30/60/90/120
Designed to meet your higher water volume requirements, PURELAB® Prima reverse
osmosis water purification systems provide primary grade water from a tap feed at flow
rates up to 120 liters per hour. With a built-in integral booster pump, PURELAB® Prima
reverse osmosis systems are ideal as pretreatment to feeding autoclaves, dishwashers or
for use in environmental cabinets.
• Auto rinse capability
• Low energy consumption
• Microprocessor based management system
• Integral pretreatment
• Performance indicators
PURELAB® PRIMA 30/60/90/120
PURELAB Prima
30/60/90/120
Up to 98% rejection
(90% minimum)
Organics
Bacteria*
CFU/ml
TOC (ppm)
Inorganics
MODEL
>99% rejection
<5
<0.1
Particulates
>99% removal
Flow Rate
LPH @ 15˚ C
30/60/90 or 120
* Based on regular sanitization and proper maintenance of the system.
System Dimensions
MODEL
HxWxD (in)
PURELAB Prima
30/60/90/120
Weight (lbs)
29.2x22.5x12.6
MODEL
Source
PURELAB Prima 30/60/90/120
Potable
Maximum
FI*
10
Prima 30–101.4
Prima 60–103.6
Prima 90–105.8
Prima 120–119.0
Max.
Conductivity
µS/cm
Max. Free
Chlorine (ppm)
1400
<0.5
Power Requirements
110–120 V 60 Hz
Temperature
1–35˚ C
Inlet Pressure
(psi)
90 max/20 minimum
*Fouling Index
Application
Glassware Washing
Feed to Autoclaves
Steam Generator Feed
Cabinets
Pretreatment to Polishers
PURELAB
Prima 30
l
l
l
l
l
PURELAB
Prima 60
l
l
l
l
l
PURELAB
Prima 90
l
l
l
l
l
PURELAB
Prima 120
l
l
l
l
l
Siemens
Water Technologies
BACK
119
‘
PURELAB® Prima 30/60/90/120
PURELAB® PRIMA 30/60/90/120 SYSTEMS
MODEL
PURELAB Prima 30
PURELAB Prima 60
PURELAB Prima 90
PURELAB Prima 120
Catalog Number
PRI030XXXX11503
PRI060XXXX11503
PRI090XXXX11503
PRI120XXXX11503
5 µm Carbon Filter
RO Module (30 lph)
RO Module (60 lph)
RO Module (90 lph)
LC123
LC115
LC119
LC120
LA593USA
SOLU30966
LA558
LA559
LA560
40 Liter Reservoir
75 Liter Reservoir
Wall Mounting Kit (40 Liter reservoir)
Wall Mounting Kit (75 Liter reservoir)
LA587
LA590
LC136M2
LA591USA
LA592USA
LA545
Siemens
Water Technologies
BACK
120
‘
CENTRA® Packaged Central Laboratory
Water Systems
The Centra® Lab Central Water System combines purification, storage and distribution in a
single cabinet. The compact system design incorporates, RO, UV, filters, pump and reservoir
in one unit. Purified water is distributed via a loop to multiple labs and points of use in a
building.
• Flow rates of 5 gpm and 10 gpm
• Consumable change reminders
• Feeds multiple floors, faucets, polishers, glassware washers, autoclaves and sterilizers
in a facility
• Water leak detection to prevent lab flooding
• Compact design for space utilization
• Easy connection to Building Management System (BMS)
• Validatable
CENTRA® SYSTEM SPECIFICATIONS
MODEL
CENTRA MDS
CENTRA LDS
CENTRA LDS-HF
CENTRA RDS
CENTRA RDS-HF
CENTRA S-200
CENTRA S-200-HF
CENTRA R-200
CENTRA R-200-HF
Inorganics
As per feed
As per feed
As per feed
From feed quality up to 18.2 MΩ-cm*
From feed quality up to 18.2 MΩ-cm*
RO Permeate
RO Permeate
Up to 18.2 MΩ-cm*
Up to 18.2 MΩ-cm*
MODEL
CENTRA MDS
CENTRA LDS
CENTRA LDS-HF
CENTRA RDS
CENTRA RDS-HF
CENTRA S-200
CENTRA S-200-HF
CENTRA R-200
CENTRA R-200-HF
HxWxD (in)
47x28.75x35
71.7x28.75x35
71.7x28.75x35
71.7x28.75x35
71.7x28.75x35
71.7x28.75x35
71.7x28.75x35
71.7x28.75x35
71.7x28.75x35
MODEL
CENTRA MDS
CENTRA LDS
CENTRA LDS-HF
CENTRA RDS
CENTRA RDS-HF
CENTRA S-200
CENTRA S-200-HF
CENTRA R-200
CENTRA R-200-HF
Source
Potable
Potable
Potable
Potable
Potable
Potable
Potable
Potable
Potable
Weight (lbs)
Empty
254
396
396
396
396
507
507
507
507
Maximum
FI*
n/a
n/a
n/a
n/a
5
5
5
5
5
As per feed
As per feed
As per feed
From feed quality to <10 ppb*
From feed quality to <10 ppb*
Typically <100 ppb***
Typically <100 ppb***
<10 ppb2
<10 ppb2
Weight (lbs)
working
352
1124
1124
1124
1124
1279
1279
1279
1279
Conductivity
µS/cm
n/a
n/a
n/a
n/a
n/a
1000
1000
1000
1000
TOC
As per feed
As per feed
As per feed
<5 CFU/ml**
<5 CFU/ml**
<50 CFU/ml**
<50 CFU/ml**
<5 CFU/ml**
<5 CFU/ml**
Typical Loop Flow
Rate****
Up to 18 L/min @ 3 Bar (45psi)
38L/min @ 3 Bar (45psi)
Max. Free
Chlorine (ppm)
n/a
n/a
n/a
n/a
n/a
0.1 ppm
0.1ppm
0.1 ppm
0.1ppm
Temperature
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
5–35˚ C (41-95˚ F)
Bacteria*
Particulates
As per feed
As per feed
n/a
0.2µm filter
0.2µm filter
0.2µm filter
<10 micron
0.2µm filter
<10 micron
Reservoir Volume
200 Liters (53 US gallons)
115V and 11F230V
110V / 60Hz
110V / 60Hz
208-230V / 60Hz
110V / 60Hz
208-230V / 60Hz
110V / 60Hz
208-230V / 60Hz
110V / 60Hz
208-230V / 60Hz
Pressure
145 psi max
145 psi max
145 psi max
145 psi max
145 psi max
58 psi max
58 psi max
58 psi max
58 psi max
*Subject to suitable deionization cylinder.
**Subject to correct operating and maintenance procedures.
***Subject to feed water.
****Subject to distribution loop design.
Siemens
Water Technologies
BACK
121
‘
CENTRA® Packaged Central Laboratory
Water Systems
CENTRA® LAB WATER SYSTEM
MODEL
CENTRA MDS
CENTRA LDS
CENTRA LDS High Flow
CENTRA RDS
CENTRA RDS High Flow
CENTRA S200
CENTRA S200 High Flow
CENTRA R200
CENTRA R200 High Flow
Catalog Number
CNXXXMDM1115
CNXXXLDM1115
CNHFLDM1-230
CNXXXRDM1115
CNHFRRDM1-230
CN200SDM1115
CNHFRS201-230
CN200RDM1115
CNHFRR2M1-230
CENTRA® Lab Water System
Bacteriological Filter (0.2 µm)
UV Lamp
Pretreatment Filter (10 µm)
0.2 µm Filter 10”
RO Module
Dot Matrix Printer Kit
CENTRA Remote Display
High Recovery Reverse Osmosis Kit
(S200 R200)
CENTRA® High Flow System
UV Lamp
Pretreatment Filter (10 µm)
0.2 µm Filter 20”
RO Module
Dot Matrix Printer Kit
CENTRA Remote Display
Loop Booster Pump Module
High Recovery Reverse Osmosis Kit
(S200 R200)
Temperature Control Kit
LC156
LC157
LC158
LC159
FCWNF1052
LC161
LA666
LA665
LA679
LC156
LC158
LC159
FCWNF2052
LC161
LA666
LA665
LA696
LA679
LA688
Siemens
Water Technologies
BACK
122
‘
MEDICA® 7/15 Water Systems (Models S/R/D)
for Clinical Analyzers
Compact system utilizing pretreatment, RO, deionization, UV photo oxidation and
in-line microfiltration technologies to produce CLSI (Clinical Laboratory Standards Institute) Type
I water to feed chemistry and immuno-diagnostic analyzers. Available in recirculating model
- MEDICA® R, degassing model - MEDICA® D or standard MEDICA® Systems.
• 1 to 15 Megohm purity water
• Flow rates from 7 lph to 15 lph
monitoring through unique LCD display
• Adjustable audio-visual alarms and cartridge change indicator
• RS232 port for water quality data collection for compliance with GLP
• Models available with a degassing feature (MEDICA® D 7/15)
• Recirculating models available to ensure consistent purity
• System includes all cartridges
MEDICA® S/R/D 7/15 SYSTEM SPECIFICATIONS
Resistivity
MΩ-cm @ 25˚ C
MODEL
MEDICA S 7/15
MEDICA R 7/15
MEDICA D 7/15
1–15
1–15
1–15
Flow Rate
LPH @ 15˚ C
<30
<30
<30
7/15
7/15
7/15
System Dimensions
MODEL
* Fouling Index
Application
Feed Water for
Clinical Analyzers
Power Requirements
MEDICA 7–40.8
MEDICA 15–41.9
100–240 V 50-60 Hz
18.2x21.6x10.6
MEDICA 7–40.8
MEDICA 15–41.9
100–240 V 50-60 Hz
MEDICA D 7/15
Potable
Potable
Potable
<0.2 µm
<0.2 µm
<0.2 µm
18.2x21.6x10.6
MEDICA R 7/15
MEDICA S 7/15
MEDICA R 7/15
MEDICA D 7/15
Neutral
Neutral
Neutral
100–240 V 50-60 Hz
18.2x21.6x10.6
Source
Particulates
MEDICA 7–40.8
MEDICA 15–41.9
MEDICA S 7/15
MODEL
<1
<1
<1
pH
Weight (lbs)
HxWxD (in)
Bacteria*
CFU/ml
TOC (ppb)
Maximum
FI*
10
10
10
Conductivity
µS/cm
1400
1400
1400
Max. Free
Chlorine (ppm)
<0.5
<0.5
<0.5
Pressure w/out
Temperature booster pump (psi)
1–35˚ C
1–35˚ C
1–35˚ C
90 max/60 min.
90 max/60 min.
90 max/60 min.
Pressure w/booster
pump (psi)
MEDICA
15
MEDICA
7
l
l
Siemens
Water Technologies
BACK
123
‘
MEDICA® Water Systems
for Clinical Analyzers
MEDICA® S/R/D 7/15 SYSTEMS ORDERING INFORMATION
MODEL
MEDICA S 7
MEDICA S 7 w/booster pump
MEDICA D 7 w/booster pump
MEDICA D 7
MEDICA R 7
MEDICA R 7 w/booster pump
MEDICA S 15
MEDICA S 15 w/booster pump
MEDICA D 15
MEDICA R 15
MEDICA R 15 w/booster pump
Catalog Number
ME007XXM1
ME007BPM1 (for feed waters of less than 60 psi)
MD007BPM2
MD007XXM1 w/DV-25
MD007BPM1 w/DV-25
MR007XXM1
MR007BPM1
ME015XXM1
ME015BPM1 (for feed waters of less than 60 psi)
MD015XXM1 w/DV-25
MD015BPM1 w/DV-25
MD015BPM2
MR015XXM1 (for feed waters of less than 60 psi)
MR015BPM1
RO Module (7.5 lph)
In-Line 0.2 µm Filter
UV Lamp
Booster Pump Kit
RS232 Printer Kit
MEDICA D Degas Membrane
LC140
LC143
LC141
LC125
LC105
LA622USA
CT1
LA512
LA609
LA606
LA618
LA513
MEMB37275
Storage Reservoirs - One Required with System
25 Liter Reservoir
40 Liter Reservoir
75 Liter Reservoir
DV25 Mounting Bracket
LA611
LA612
LA613
LA621
LC136M2
LA591USA
LA592USA
LA591USA
Note: Some MEDICA D systems come with DV-25 Docking Vessel Reservoir. Please note above specifications.
Siemens
Water Technologies
BACK
124
‘
MEDICA® Pro 30/60/120 Water Systems
(S/R/RE) for Clinical Analyzers
The MEDICA® Pro line of water purification systems is available in four models to
meet CLSI Type I water standards for clinical analyzers. The system incorporates an
integral 50 liter storage reservoir, RO, DI purification, UV photo-oxidation and ultramicrofiltration technologies.
• Xport USB device for easy download of system performance data to comply
with GLP guidelines
• Unique space saving design
• Upgradable for higher flowrates
• High capacity Protek deionization cartridges
• Special E-cartridge to reduce CO2 and prolong the life of the DI packs
• Leak detection with auto shut down - minimizing the risk of flooding
• Emergency by-pass loop provides an uninterrupted supply of pure water in an
emergency
MEDICA® PRO S/R/RE SYSTEM SPECIFICATIONS
MODEL
Inorganics MΩ-cm
@ 25˚ C (77˚ F)
TOC (ppb)
Silica
ppm
Bacteria*
CFU/ml
>10
<30
<0.05
<1
MEDICA® Pro S/R/RE
pH
Particulates
µm
<0.05 µm
Dispense Flows
to analyzer
Neutral
4 l/min
System Dimensions
MODEL
MEDICA Pro-S–260.0
MEDICA Pro-R/RE –265.0
32.3x31.1x18.9
MODEL
Source
MEDICA® Pro S/R/RE
Potable
Maximum
FI*
10
30/60/120 liters
per hour at 15˚C
Weight (lbs)
HxWxD (in)
MEDICA® Pro S/R/RE
Make-up Flow Rate
Conductivity
µS/cm
1400
Max. Free
Chlorine (ppm)
<0.5
Temperature
1–35˚ C
Pressure
90 max/10 min.
* Fouling Index
Siemens
Water Technologies
BACK
125
MEDICA® Pro 30/60/120 Water Systems
(S/R/RE) for Clinical Analyzers
MEDICA® PRO SYSTEMS
The MEDICA® Pro line of systems
MODEL
Catalog Number
MEDICA Pro LPS
MEDICA Pro S 30
MEDICA Pro S 60
MEDICA Pro S 120
MEDICA Pro R 30
MEDICA Pro R 60
MEDICA Pro R 120
MEDICA Pro RE 30
MEDICA Pro RE 60
MEDICA Pro RE 120
MPXXXPSM1-115
MP030SBM1-115
MP060SBM1-115
MP120SBM1-115
MP030RBM1-115
MP060RBM1-115
MP120RBM1-115
MP030REM1-115
MP060REM1-115
MP120REM1-115
Model
Medica Pro-S Medica Pro-R Medica Pro-RE Medica Pro LPS
Pretreatment
√
√
√
Extra Capacity
Pretreatment
Optional
Optional
Optional
√
√
√
√
Optional
Optional
√
Optional
Reverse Osmosis
√
√
√
Integral 50 Liter
Reservoir
√
√
√
√
Deionization
√
√
√
√
Optional
Optional
Optional
Optional
UV Photo-oxidation
√
√
√
√
Ultra-microfiltration
√
√
√
√
√
√
Air Gap
Degassing
2nd Deionization
Cartridge
Recirculation
UV lamp 254nm (destroy bacteria and help to reduce TOC levels)
Ultra Microfilter 0.05 um
Medpure L1 DI (Deionization) high capacity cartridge
Protek L1 (high capacity adsorption pretreatment cartridge - standard size)
Protek L2 (high capacity adsorption pretreatment cartridge - Large size)
RO (reverse osmosis) cartridge 30 lph High flux reverse osmosis membrane
RO cartridge 60 liter per hour High flux 30 liter per hour reverse osmosis membrane
E-cartridge (Reduce CO2 levels to extend Medpure DI cartridge)
Sanitization tablets (12 pk)
Composite vent filter (maintain bacterial integrity of reservoir)
MEDICA Pro - Starter Kit 1 (install kit, Protek L1, Medpure L1, 3 sanitization tablets)
MEDICA Pro - Starter Kit 2 (install kit, Protek L2, Medpure L1, 3 sanitization tablets)
Analyzer Feed pump 115V 60Hz
High Flow Upgrade Kit for 2nd Medpure DI cartridge
(includes fittings and 1 Medpure DI cartridge)
E-cartridge Upgrade Kit
Castors (useful for under bench installations also)
LC105
LC109
LC174
LC175
LC177
LC179
LC180
LC181
CT3
LC136M2
LC188
LC189
LA632
LA700
LA701
LA704 USA
Note: Cartridge starter kit must be ordered with MEDICA Systems.
Siemens
Water Technologies
BACK
126
‘
MEDICA® R-200 Water Purification System
for High Volume Clinical Analyzers
Integrated water purification system designed to provide a purified water supply to high
volume clinical analyzers and laboratories with multiple analyzers. The MEDICA® R-200
System combines storage, purification and distribution in a single cabinet.
• Delivers up to 21 lpm of CLSI type II water purity
• Incorporates storage reservoir, UV, 0.2µm filter and RO technologies in one unit
• Leak detection with auto shut-down prevents flooding
• Full validation support documentation available to comply with regulatory
standards
• RS232 interface to record system performance for GLP
• Integrated by-pass loop ensures a constant water supply in an emergency
MEDICA® R-200 SYSTEM SPECIFICATIONS
MODEL
MEDICA R-200
Resistivity
MΩ-cm @ 25˚ C
TOC (ppb)
>10
<30
* Subject to correct operating and maintenance procedures
System Dimensions
MODEL
MEDICA R-200
HxWxD (in)
71.7x28.75x35.0
MODEL
MEDICA R-200
Source
Potable
Maximum
FI*
5
Silica ppm
<0.05
Bacteria*
CFU/ml
<10
Particulates
pH
<0.2 µm
Effectively Neutral
Dispense Flows
to analyzer
Up to 21 L/min
Make-up
Flow Rate
200 liters per hour
Operational
Weight (lbs)
1190.0
Conductivity
µS/cm (max)
1000
Free
Chlorine (ppm)
<0.2
Temperature
5–35˚ C
Pressure
Maximum (psi)
60
Pressure
Minimum (psi)
30
* Fouling Index
Siemens
Water Technologies
BACK
127
‘
MEDICA® R-200 Water Purification System
for High Volume Clinical Analyzers
MEDICA® R-200 SYSTEM
MODEL
MEDICA R-200 (230 volt 50 Hz)
MEDICA R-200 (115 volt 60 Hz)
Catalog Number
MR200DSM1-230
MR200DSM1-115
RO Particle Pretreatment Filter
UV Lamp
In-line 0.2 µm Filter
Sanitization Solution (4 x 1000 ml)
LC159
LC158
LC160
LC156
B10000209
Siemens
Water Technologies
BACK
128
LABORATORY WATER SYSTEMS – DEIONIZATION
‘
Portable Laboratory Deionization Systems
The lab wall-mountable deionization systems produce flow rates of 30 to 90 liters per
hour of high purity water. These systems are a cost effective alternative for small
volumes of deionized water. Built in meter, color change indicators and optional
resistivity meters make it easier to monitor your water quality.
B114 Deionizer
• Disposable cartridge system enables a quick and easy exchange when cartridge is
exhausted
B114
• Battery operated wall mountable system with color coded resistivity meter displays
water quality
Vision 125 & 250 Deionizers
• Color change indicators allow users to monitor when resin exhausts and change
out is required
• Optional dispense gun can be connected to either system
Vision 125 and 250
Micromeg Deionizer
• Choice of either disposable or exchangeable deionization cartridge
• Battery operated wall mountable system with color coded resistivity meter displays
water quality
Accessories
Vision 125 & 250 Dispense Gun
DSP404
Micromeg
Laboratory Performance Specifications
Max Operating Max Operating
Pressure
Temperature
psi
˚C
Resistivity
MΩ-cm
Max Flow
lph
B114
1-10
30
10
35
Vision 125
1-10
60
90
35
Vision 250
1-10
60
90
35
Micromeg
1-10
90
50
35
Model
System Dimensions
Height
inches
Width
inches
Depth
inches
Weight
lbs
B114
15
7
6
5
Vision 125
15
4
4
5.5
Vision 250
26
4
4
9
Micromeg
20
8
9
14.3
Model
Siemens
Water Technologies
For higher flowrate needs, see Service Deionization Systems, Page 182.
BACK
129
Laboratory Disposable Deionization (DI)
System
Disposable alternative to SDI tanks. This system is a floor mounted 0.25 cubic foot
cartridge housing and cartridge combination. It is designed to provide pretreated water to
a wide range of water treatment applications. Similar to SDI tanks these disposable
cartridges are available in carbon media, mixed bed, cation, and anion resins.
For use in:
• General laboratory use
• Food or beverage processors
• Electronics and chemical industries
• Hospitals and Universities
• Pretreatment to Ultrapure water systems
• Produces up to 18 megohm water from a potable source
• Max flow: up to 2 gpm (8 lpm)
• Easy top-loading cartridge with o-ring seal
• Many choices of resin media options
• Easy cartridge replacement with minimal spillage
• Housing comes tested with 3/4” unions attached
• Multiple housings can be arranged in parallel or series to meet the flow required
Specification: (housing)
Filter housing:
0.25 cubic feet (7 liters) Housing w/ FDA EPDM o-ring.
3/4“ bottom inlet/outlet
System Performance:
Feed water parameters
Maximum temp:
100°F (38°C)
Pressure range:
100 psig (7 bars)
Height:
27.5” (69.9cm)
Housing weight:
18lbs (8.1kg)
Specification: (Cartridge)
Height:
22 in
Operational weight: 14 lbs
Ordering information:
Item # LAB025DDI
Desc: 1/4 cubic foot Gray PVC housing w/ FDA EPDM O-ring.
Consumables:
Description
1/4 cu foot mixed bed deionizer cartridge for disposable DI system.
1/4 cu foot cation bed deionizer Cartridge for disposable DI system.
1/4 cu foot anion bed deionizer Cartridge for disposable DI system.
Item #
LABDDIMB
LABDDICA
LABDDIAN
*custom media type cartridges available upon request. Minimum orders apply.
Contact technical support at 800-875-7873 x 5000 to discuss your requirements
Siemens
Water Technologies
BACK
130
LDIRS Deionization Recirculating Systems
Siemens Water Technologies LDIRS Series water purification systems deliver
up to 4 gpm (15 lpm) of deionized water. The system is available in two
models.
LDIRS03
A compact, wall mountable panel capable of supplying up to 3 gpm (11 lpm)
deionized water to a small distribution loop up to 100 linear feet in length
LDIRS04
A larger skid mounted system capable of supplying up to 4 gpm (15 lpm) of
deionized water to a larger distribution loop up to 500 linear feet in length.
NOTE: Flow rates dependent upon size and length of distribution piping loop.
System Standard Features:
• Dual Filtration: 1.0 micron pre-filtration and 0.2 micron final filtration
• Continuous recirculation through all post treatment components
including UV sterilizer and 0.2 micron final filtration
• Bacteria destruct ultraviolet sterilizer (254 nm)
• Built-in GFCI protection
System Benefits:
• Flow rates up to 4gpm
• Easy Installation
• Both wall panel and skid mounted system have small footprint to
conserve space (additional space required for SDI components)
Model
Flow Rate (max)
Feed Water Pressure
Feed Water Temp.
LDIRS03
3 gpm (11 gpm)
min. 40 psig (2.7 bar)
max. 90 psig (6.2 barA)
min. 50˚F (10˚C)
max. 90˚ (32˚C)
LDIRS04
4 gpm (15 gpm)
min. 40 psig (2.7 bar)
max. 90 psig (6.2 barA)
min. 50˚F (10˚C)
max. 90˚ (32˚C)
System Dimensions
Model
Electrical
Overall Dimensions (cm)
Frame Materials
Piping Materials
LDIRS03
115VAC
grounded receptacle
38 (86) L x 9 (23) D X 40 (102) H
White Polyethylene
S-80 PVC and
Polyethylene Tube
LDIRS04
115VAC
grounded receptacle
30 (76) L x 24 (61) D X 65 (165) H
Powder Coated Carbon
Steel
S-80 PVC
Ordering Information:
LDIRS Deionization Recirculation System, 3 gpm per minute max. (11 lpm max.)
LDIRS Deionization Recirculation System, 4 gpm per minute max. (15 lpm max.)
LDIRS03
LDIRS04
Siemens
Water Technologies
BACK
131
LABORATORY WATER SYSTEMS – DOCKING VESSELS
Modular Docking Vessels
DV 25 and DV 35
The new DV 25 and DV 35 docking vessels are state-of-the-art high purity water storage
DV 35
reservoirs specially designed to accommodate the PURELAB® Ultra, Option, Prima and
MEDICA® water purification systems. The L-shaped docking vessels are designed as a base
for the water purification system, resulting in one integral, compact unit, that eliminates
the need for a separate reservoir and saves valuable bench space.
• Smooth internal surfaces with no crevices to harbor bacteria
• Inert polyethylene construction minimizes possibility of contamination of stored
water
• Sloping, self-draining base provides more complete sanitization and quicker rinse-out
DV 25
time
• Recirculation capability combined with composite vent filter prevents ingress of
airborne bacteria and reduces CO2 levels and volatile organics within the reservoir
• Built-in dispense tap (DV 35 version only)
• Docking station design means no unsightly exposed interconnecting tubing or wiring
Bottom:
DV 25 for use with
these systems only:
Top:
DV 35 for use with these
systems only:
PURELAB® Option-R 7/15
All PURELAB® Ultra Models
MEDICA® 7/15
• Reservoir water level indicator
PURELAB® Option-Q
PURELAB® Option-S 7/15
• Simple “plug-in” connections allow easy connection to the water purification system
for mistake-free operation
PURELAB® Classic
Composite
Vent Filter
MODEL
DV 25 Modular
Reservoirs
DV 35 Modular
Reservoirs
Catalog
Number
Wall Bracket
Installation
Kit
Supplied
w/DV 25
Supplied
w/DV 35
LA621
LC136M2
LA591USA
LA620
LC136M2
LA591USA
TECHNICAL SPECIFICATIONS
Product Codes
MODEL
Volume
DV 25 Modular
Reservoirs
DV 35 Modular
Reservoirs
25 Liters
35 Liters
Dimensions and Weights
MODEL
DV 25 Modular Reservoirs
Connections
MODEL
Temperature
Range
Flow Rate
(tap dispense)
5–40˚ C
2.5 liters/min
5–40˚ C
HxWxD (in)
20x21x14
20x21x14
Inlet
5/16" (8 mm)
5/16" (8 mm)
N/A
Weight (lbs)
(kg)-empty
13.2 (6)
15.4 (7)
Weight (lbs)
(kg)-full
Outlet
5/16" (8 mm)
5/16" (8 mm)
68.2 (31)
94.4 (42)
Return
5/16" (8 mm)
5/16" (8 mm)
Siemens
Water Technologies
BACK
132
LABORATORY WATER SYSTEMS - WATER RESERVOIRS
Stand Alone
Storage Reservoirs
Easy-to-use reservoir specially designed for the storage of purified water. Fully wallmountable to save valuable bench space.
• Inert polyethylene construction minimizes the risk of organic leachables
• Fully opaque to avoid algal growth
• Integrated 5-level switch control to allow automatic fill-up of reservoir by lab
water system
• Sloping base allows complete drainage of water from reservoir
• Composite vent filter eliminates contamination of water from CO2, volatile
organic compounds or airborne bacteria
• Available in 3 convenient sizes — 25 liter, 40 liter and 75 liter
• Designed for use with PURELAB® systems
RESERVOIR SPECIFICATIONS
MODEL
25 Liter Reservoir
40 Liter Reservoir
75 Liter Reservoir
HxWxD (in)
16x14x11
21x16x12
27x20x14
Weight (lbs)
11 lbs Empty/ 66 lbs Full
Useable Volume
25 Liters
40 Liters
75 Liters
MODEL
Catalog Number
For use with MEDICA®, PURELAB® Prima and Option Systems
LA611 (for 7 or 15 lph systems)
LA587 (for 30,60 or 120 lph systems)
LA590 (for 30,60 or 120 lph systems)
LC136M2
LA591USA
LA592USA
25 Liter Storage Vessel
Reservoir 40 Liter
Reservoir 75 Liter
Composite Vent Filter (supplied)
Wall Mounting Bracket (25/40 Liters)
Wall Mounting Bracket (75 Liters)
Siemens
Water Technologies
BACK
133
LABORATORY WATER SYSTEMS – ACCESSORIES
Polypropylene Carboys
Convenient polypropylene carboys for storage of high purity water. Carboys come
with or without spigot for ease of use. Large handles provide easy transportation in
the lab.
• Steam autoclavable at 121˚ C
• Large handles help with pouring and carrying
• Front spigot for easy dispensing
Part #
Description
CARBOYPP2
Carboy 2.5 gal (10L) PP without spigot, autoclavable
CARBOYPP5
Carboy 5 gal (20L) PP without spigot, autoclavable
CARBOYPP2SP
Carboy 2.5 gal (10L) PP with spigot, autoclavable
CARBOYPP52SP
Carboy 5 gal (20L) PP with spigot, autoclavable
Siemens
Water Technologies
BACK
134
Polypropylene Faucets
Designed for easy dispensing of deionized or distilled water where high purity is
required. Reduces the risk of bacteria.
• Laboratory faucets are available in countertop and wall mounted style
• Available with integral vacuum breakers
• Recirculating faucet available
• Made from pure unpigmented polypropylene
Part #
Description
LFSPRF1PP
Polypro recirculating faucet, deck mount gooseneck
LFSPF10VB
Polypro deck mount lab faucet with integral vacuum breaker (welded assembly)
LFSPF30VB
Polypro deck mount lab faucet with integral vacuum breaker (threaded assembly)
LFSPF20VB
Polypro wall mount lab faucet with integral vacuum breaker (welded assembly)
LFSPF40VB
Polypro wall mount lab faucet with integral vacuum breaker (threaded assembly)
LFSPF10STD
Polypro faucet, gooseneck deck mount (welded assembly)
LFSPF20STD
Polypro faucet, gooseneck wall mount (welded assembly)
LFSPF30STD
Polypro faucet, gooseneck deck mount (threaded assembly)
LFSPF40STD
Polypro faucet, gooseneck wall mount (threaded assembly)
Siemens
Water Technologies
BACK
135
TOTAL-CHECK™ 900
TOC (Total Organic Carbon) Monitor
The Total-Check™ 900 TOC monitor provides a total picture of water quality. This
stand alone unit can be used with any lab water purification system to continually
measure the levels of organic substances in high purity water at the systems’
dispense. Total-Check™ 900 offers quick, accurate, easy to read measurements of
water quality being produced.
•
•
•
•
1-999 ppb TOC levels
Calibration services available
Easy to read, single LCD screen
Dual wavelength 185/254nm UV lamp
PERFORMANCE
Operating Range:
Display Resolution:
Repeatability:
Accuracy:
1-999 ppb TOC
single ppb increments
+/-5%
+/-15% or +/- 1 ppb (whichever is greater)
WATER SAMPLE:
Inlet Pressure:
70 psi MAX (4.8 bar)
Temperature:
5 to 35ºC (41-95ºF)
Resistivity:
15MΩ-cm@25ºC *
* May also be use with sample resistivity between 5 and 15MΩ-cm@25ºC, repeatability and
accuracy levels will be lower.
SPECIFICATIONS:
Operating Temperature:
Operating Weight:
Height:
Width:
Depth:
Electrical:
15 to 30ºC
4.2lbs (1.9kg)
9.3 inches (237 mm)
6.1 inches (155 mm)
5.9 inches (150 mm)
100-230V /50-60Hz
ORDERING INFORMATION:
US Model
TM900M001
UE Model
TM900ME01
CONSUMABLES / ACCESSORIES:
Replacement UV Lamp:
TM900M001
Inlet / Outlet tubing:
TMFTPF04949
Tube Tubing 25’:
TMFTPF04945
Luer Fittings (5 pk):
TMFTPF04950
Siemens
Water Technologies
BACK
136
Remote Control Stations
Remote user interface for the PURELAB® Prima, PURELAB® Option and MEDICA® water
purification systems. Easy to use, mountable unit fully replicates the GRID (graphically
intuitive display) panel providing constant water system monitoring capabilities
from a remote location.
STANDARD FEATURES AND BENEFITS
• Replicates GRID display monitor on water purification system
• Easy to read display with icons and graphical representation of the process flow
• Audio visual alarms to alert user when consumables need replacing or when
reservoir water level is low
• Provides parallel display capabilities to simultaneously display system parameters
from 2 different locations
• RS232 port for connection to a printer for easy data collection of water quality
and system performance for compliance with GLP guidelines
• Compact size fits in any location
• Wall, bench, panel, or furniture mountable offers flexibility and convenience
REMOTE CONTROL STATION SPECIFICATIONS
Weight (lbs)
2.2
Temperature
HxWxD
4.75 x 7.90 x 2.75
5˚ C – 40˚ C
Maximum Distance from
Water System (Ft)
24.6
MODEL
Catalog Number
PURELAB Prima 7/15/20 RES
LA628
PURELAB Option-S 7/15 RES
LA624
PURELAB Option-R 7/15 RES
LA625
MEDICA 7/15 RES
LA627
Siemens
Water Technologies
BACK
Remote Dispense Gun
Premium dispense gun allows dispensing of purified water from a remote
location. Ergonomic design and push and lock dispense mechanism provides
comfort and drop-by-drop control of purified water while filling laboratory
containers.
STANDARD FEATURES AND BENEFITS
• Ability to dispense up to 6 1/2 feet from the water purification system at a flow
rate up to 1.5 lpm
• Can be operated with optional point of use filter
• Integral recirculation capability up to point of dispense when used with a water
system with recirculation pump
• Drop-by-drop dispense control for greater dispensing accuracy
• Push back and lock dispense mechanism allows hands-free operation
• Wall mountable
REMOTE DISPENSE GUN SPECIFICATIONS
Flow Rate
(Depending on water system used)
Tube Length
Approx 6'.5"
0.8 –1.5 lpm
MODEL
Catalog Number
Remote Dispense Gun
LA629 For use with PURELAB® Option R 7/15
Remote Dispense Gun
LA644 For use with PURELAB® Ultra and PURELAB® Classic
Siemens
Water Technologies
BACK
137
138
LABORATORY WATER SYSTEMS - FILTRATION SYSTEMS
Point-of-Use High Purity Water
Capsule Filters
Designed to provide absolute filtration at point of dispense on laboratory ultrapure
water systems or after standard service deionization systems. Disposable design makes
filtration easy and convenient.
• Available in 0.1 µm or 0.2 µm pore size ratings
• Two convenient sizes — 500 cm2 and 1000 cm2 effective filtration area
• Hydrophilic polyethersulfone bacterial retentive membrane–based on
Brevundimonas diminuta challenge (HIMA)
• Integrity tested and validated, making them ideal for pharmaceutical and
microelectronics applications
• Low extractable welded housing and materials—no adhesives or glues
• Non-pyrogenic per USP and LAL testing
Dimensions
Filtration Area
Diameter (OD)
Length/in (cm)
Materials
Cartridge
Media
Maximum Temperature
Max. Oper. Pressure
Max. Momentary Pressure
Filtration Rating
Toxicity
Validation
Recommended Water Flow Rates –
gpm (lpm)
500 cm2
2.7" (6.8 cm)
4.8" (12.2)
500
1000 cm2
1000
2.7" (6.8 cm)
6.7" (16.9)
Pleated polyethersulfone
Pleated polyethersulfone
140° F (60° C) @ 30 psid (2.1 bar)
60 psid (4.1 bar) @ 20˚ C
100 psid (7.0 bar) @ 20˚ C
100% Absolute
Non-toxic by USP Class VI Biological test for plastics
HIMA Bacterial challenge test methods (107 organisms/cm2)
140° F (60˚ C) @ 30 psid (2.1 bar)
60 psid (4.1 bar) @ 20˚ C
100 psid (7.0 bar) @ 20˚ C
100% Absolute
Non-toxic by USP Class VI Biological test for plastics
HIMA Bacterial challenge test methods (107 organisms/cm2)
0.1 µm
0.2 µm
0.04 (0.16)/1 psid
0.1 (0.38)/1 psid
0.1 (0.38)/1 psid
0.3 (0.38)/1 psid
0.1 µm
0.2 µm
Sanitizing Agents
≥ 90 psig (≥ 6.2 bar)
≥ 45 psig (≥ 3.1 bar)
Hydrogen peroxide or autoclaved for 20 minutes at 121˚ C
≥ 90 psig (≥ 6.2 bar)
≥ 45 psig (≥ 3.1 bar)
Hydrogen peroxide or autoclaved for 20 minutes at 121˚ C
Integrity Test - Pore Size (Minimum
Water Bubble Point)
Capsule Filters
0.2 µm 1/4" NPTM x 1/4" Hose Barb
Half size 0.1 µm 1/4" NPTM x 1/4" Hose Barb
Half size 0.2 µm 1/4" NPTM x 1/4" Hose Barb
Half size 0.1 µm 1/4" NPTM x 1/4" NPTM
Half size 0.2 µm 1/4" NPTM x 1/4" NPTM
Half size 0.1 µm 1/4" NPTM x 1/4" Hose Barb w/filling bell
Half size 0.2 µm 1/4" NPTM x 1/4" Hose Barb w/filling bell
Full size 0.1 µm 1/4" NPTM x 1/4" Hose Barb
Full size 0.2 µm 1/4" NPTM x 1/4" Hose Barb
Full size 0.1 µm 1/4" NPTM x 1/4" NPTM
Siemens
Water Technologies
BACK
CW3750
FCCFH11S1
FCCFH11S2
FCCFH12S1
FCCFH12S2
FCCFH14S1
FCCFH14S2
FCCFP11S1
FCCFP11S2
FCCFP12S1
FCCFP12S2
FCCFP23S1
FCCFP23S2
139
LABORATORY WATER SYSTEMS - FILTRATION SYSTEMS
IWT® Cartridge Filtration System
Convenient, economical, high quality modular water filtration system that operates
on city water pressure and can easily be expanded to fit most needs. No electricity
required. Up to 18 Megohm water quality can be achieved with this system.
• Consistent source of high quality water at 50% the cost of distilled water
• Removes organics, phosphates, chlorine, and essentially all ionizable
constituents from water supply
• Convenient color change resin to indicate resin exhaustion
• Quick and easy installation
• No instruments needed
• Water quality up to 18 megohm-cm resistivity can be achieved
• Flexible system configuration to meet specific needs
SPECIFICATIONS
Cartridge
Adsorber
Metex
Universal
Research
Cartridge
Capacity
(grains as CaCO 3)
Flow Rate GPH
7.2
7.2
7.2
7.2
NA
3200
1600
1000
Dimensions
3 1/2"x19 3/4"
3 1/2"x19 3/4"
3 1/2"x19 3/4"
3 1/2"x19 3/4"
Shipping Weight
6 lbs single/36 lbs six pack
Maximum Operating
Pressure (psi)
30
30
30
30
Removal
Adsorber
For pretreatment of water containing organics, free chlorine, phosphate complexes, and turbidity.
Universal
Reduces ion concentration to a level obtainable by single distillation. All ionizable constituents are removed except free carbon dioxide and silica.
Metex
Research
For removal of all metallic ions to a level of 1% of the influent concentration. Removes ammonia and other cations from condensate samples.
Reduces ion concentration to a level obtainable by triple distillation.
Essentially all ionizable constituents including silica and free carbon dioxide are removed.
Applications
Environmental and humidity chambers
Recharging lead and acid batteries for cars, fork lifts, etc
Electronic cleaning equipment (with 99% isopropyl alcohol bath to wash solder
trails and flux off circuit boards)
Steaming devices used in food industry
Photo processing and printing applications
Humidifiers (including computer room humidifiers)
Ice Machines
Hydroponics
Absorber Cartridge single pack
Absorber Cartridge six pack
Metex Cartridge single pack
Metex Cartridge six pack
Universal Cartridge single pack
Universal Cartridge six pack
Research Cartridge single pack
Research Cartridge six pack
Single assembly bracket single pack
Single assembly bracket six pack
Single assembly bracket with faucet adapter single pack
Single assembly bracket with faucet adapter six pack
Duplex assembly Bracket single pack
Duplex assembly Bracket six pack
Duplex assembly Bracket with faucet adapter single pack
Duplex assembly Bracket with faucet adapter six pack
3C0200002
3C0200003
3C0400002
3C0400003
3C0600002
3C0600003
3C0800002
3C0800003
3C1200003
3C1200004
3C1200007
3C1200008
3C1200011
3C1200012
3C1200015
3C1200016
Siemens
Water Technologies
BACK
140
LABORATORY WATER SYSTEMS - REPLACEMENT CARTRIDGES
Replacement Cartridges for Laboratory
Water Purification Systems
Cartridges provide ultra-high-purity water for use with MODULAB®, PURELAB®, Millipore®
and Barnstead® water systems. The wide selection of cartridge styles and types allows
custom-configuration of your laboratory water system to meet a variety of application
needs.
• Higher ion exchange capacity than other manufacturers’ cartridges
• Lower cartridge replacement costs
• Unique diffuser design for even distribution of water and maximum cartridge life
• Vacuum packaging for maximum shelf life
• Ultrasonic-welded seams and joints for extractable-free product water
• Date coded for critical quality control
• GMP cartridge manufacturing facility
• Patented downflow design maximizes removal efficiency and cartridge capacity
We offer the following types of resin:
Activated Carbon Used for pretreating tap water before deionization. Removes traces
of chlorine and organics through adsorption.
Colloidal Removal Resin Removes colloids and bacteria by ion exchange and
adsorption. Protects and enhances performance of deionization resin, and extends
final filter life.
Cation Exchange Resin Removes positively charged impurities. When used alone, this
resin will lower solution’s pH. Usually used in conjunction with anion resin in a mixed
bed ion exchange cartridge.
Anion Exchange Resin Removes negatively charged impurities. When used alone, this
resin will raise a solution’s pH.
Oxygen Removal Resin Removes oxygen and prevents corrosion in water cooling loop
applications. For use on feed water containing less than 10 ppm ionized solids.
Mixed Bed Ion Exchange Contains a mixture of cation and anion resins in a mixed bed
to purify water up to 18.2 megohm-cm. Used to polish pretreated water, or to
produce high-purity water in a loop system.
Organic Scavenger/Removal Resin Removes trace organics from deionized water to less
than 10 ppb TOC.
High Capacity Ion Exchange Combines anion and cation resin in a 2-bed configuration.
Used for purifying large quantities of water at a lower purity level than provided by
mixed bed deionization. May also be used to pretreat mixed-bed cartridges for longer
cartridge life.
Custom Cartridges
Specialty resin cartridge configurations are available to meet your needs. Call our
technical service department for more information. Minimum order volumes apply.
Siemens
Water Technologies
BACK
141
Replacement Cartridges for Siemens Water
Technologies, USFilter® and ELGA®
Laboratory Water Systems
PURELAB® Ultra Water System Cartridges
Ultra-microfilter
Point-of-Use Filter
Purification Pack-RO Feed (for MK1 Ultras)
Purification Pack-SDI Feed (for MK1 Ultras)
Purification Pack-Low Ionic (for MK1 Ultras)
Purification Pack-Low TOC (for MK1 Ultras)
Ultrafilter (5,000 MWCO)
Labpure S1 DI cartridge - RO feed
Labpure S2 DI cartridge - SDI feed
Labpure S3 DI cartridge - Low Ionic
Labpure S4 DI cartridge - Low TOC
LC109
LC134
LC147
LC148
LC149
LC150
LC151
LC182
LC183
LC184
LC185
PURELAB® Classic Water System Cartridges
Purification Cartridge (For MK1 Classic)
Ultra Filter 5000 mwt
Purification Cartridge (For MK1 Classic)
Endoguard 5000 MWCO UF Cartridge (For MK1 Classic)
Final Filter 0.2 µm (1/pk)
Labpure S5 purification cartridge
LC162
LC169
LC126
LC151
LC134
LC186
PURELAB® UHQ Water System Cartridges
Reverse Osmosis Cartridge
Ultra Microfilter Cartridge 0.05 µm
UHQ Purification Pack (2 Organic Absorption Cartridges and 2 Ion Exchange Cartridges)
UHQ5
LC109
UHQPACKA
UHQ4
PURELAB® Option Water System Cartridges
Pretreatment Cartridge (Option 7 & 15)
Pretreatment 5 micron Carbon Filter (Option 30 & 60)
Purification Cartridge (Option R&S 7 & 15)
Purification Cartridge (Option-Q 7 & 15)
Purification Cartridge (Option 30 & 100)
RO Module (7.5 liter/hour) — (Option 7 & 15)
RO Module (30 liter/hour) — (Option 30)
RO Module (60 liter/hour) — (Option 60)
Point-of-Use Filter (Option 7 & 15-R)
Point-of-Use Filter (Option 30 & 60-R)
LC140
LC123
LC141
LC163
LC114
LC143
LC115
LC119
LC145
LC106
PURELAB® Prima Water System Cartridges
Pretreatment Cartridge (PURELAB Prima 7/15/20)
Pretreatment 5 Micron Carbon Filter (Prima 30/60/90/120)
RO Module (7.5 liter/hour) — (Prima 7/15/20)
RO Module (30 liter/hour) — (Prima 30)
RO Module (60 liter/hour) — (Prima 60, 120)
RO Module (Prima 90)
LC140
LC123
LC143
LC115
LC119
LC120
Siemens
Water Technologies
BACK
142
PURELAB® Plus Water System Cartridges
PURELAB Purification Quadpack w/0.2 µm Final Filter
PURELAB Purification Quadpack
Endoguard 5000 MWCO UF Membrane Cartridge
MEDICA® Water System Cartridges
Pretreatment Cartridge (Medica 7/15)
5 µm Carbon Filter (Medica 30/100)
Purification Cartridge (Medica 7/15)
Purification Cartridge (Medica 30/100)
RO Module (Medica 7/15)
RO Module (30 lph)
RO Module (60 lph)
RO Module (100 lph)
In-Line 0.2 µm Filter (Medica 7/15)
In-Line 0.05 µm UMF Filter (Medica 30/100)
PLC6000
PLC5000
LC151
LC134
LC140
LC123
LC141
LC114
LC143
LC115
LC119
LC137
LC125
LC109
MEDICA® Pro Water System Cartridges
0.05µm ultra microfilter
Medpure L1 DI (Deionization) high capacity cartridge
Protek L1 (high capacity adsorption pretreatment cartridge - standard size)
Protek L2 (high capacity adsorption pretreatment cartridge - Large size)
RO (reverse osmosis) cartridge 30 lph High flux reverse osmosis membrane
RO cartridge 60 lph High flux reverse osmosis membrane
E-cartridge (Reduce CO2 levels to extend Medpure DI cartridge)
Castors (for easy mobility)
LC2109
LC174
LC175
LC177
LC179
LC180
LC181
LA704USA
MEDICA® R-200 Water System Cartridges
RO Pretreatment Filter
In-line 0.2µm Filter
Bacterial Vent Filter
LC159
LC160
LC156
LC157
CENTRA® Water System Cartridges
Bacterial Filter
0.2µm Filter
RO Module
Pretreatment Filter
LC157
LC156
LC160
LC161
LC159
MODULAB® High Flow System Cartridges
Carbon Cartridge
MLHF20CAR1
MLHF20OS01
MLUF020S05
MLUF020S2
Organic Removal Cartridge
0.05µm Micro Ultra Filter
0.2µm Bacteria Filter
Siemens
Water Technologies
BACK
MODULAB® Water System Membrane Cartridges
10" RO Membrane (TFC)
20" RO Membrane (TFC)
10" UF Membrane (10,000 MWCO)
DIRO3002
DIRO3222
UFPW3308T
DIUF8102
DIUF8202
MODULAB® Water System Resin Cartridges
10" Mixed Bed Cartridge (1/pk)
20" Mixed Bed Cartridge (1/pk)
10" Organic Cartridge (1/pk)
20" Organic Cartridge (1/pk)
10" Pureone Cartridge (1/pk)
10" Separate Bed DI (1/pk)
20" Separate Bed DI (1/pk)
12" Mixed Bed Cartridges (1/pk)
12" Mixed Bed Cartridges (2/pk)
DIMN1000-1
DIMN2000-1
DIOR1000-1
DIOR2000-1
DIMBS1000
DISB1000-1
DISB2000-1
DIMM1200-1
DIMM1200-2
MODULAB® Carbon Cartridges
10" Carbon Cartridge (1/pk)
10" Pretreatment Carbon Cartridge/5 µm Prefilter
20" Pretreatment Carbon Cartridge/5 µm Prefilter
DICR1000-1
DICR1000-4
DICR2000-1
LBCPT1002
LBCPT2004
MODULAB® Water System Cartridge Kits
Modulab Cartridge Kit for RO Feed – Contains 1 EA CWCF23110,2
EA DIMN1000-1, 1 EA DIOR1000-1, 1 EA CW3750 Final Filter
Modulab Cartridge Kit for DI Feed – Contains 1 EA DICR1000-1, 2
EA DIMN1000-1, 1 EA DIOR1000-1, 1EA CW3750 Final Filter
Modulab UV/UF Start Up Kit 20" – Contains (1) 20" UF
Membrane (40,000 MWCO), (1) 0.1 µm Capsule Filter
Modulab Clinical Cartridge Kit
LBMPC1006
LBMPC1005
UFSU8202
LBCCK1002
Miscellaneous Laboratory Cartridges
Mixed Bed 10" cartridge PVC P-154
Mixed Bed 10" cartridge
Mixed Bed 10" cartridge with porex disc, 4 pack
Mixed Bed 5" cartridge with porex disc
Anion Cartridge 10"
Anion/Cation separate Bed 5" cartridge
Anion/carbon separate Bed 10" cartridge
DIMNP154
DIMN4000
DIMN1000-4PD
DIMN0500-PD
DIOH4000
DISB0500
DIOH4010
Siemens
Water Technologies
BACK
143
144
LiquiPure® Replacement Cartridges for
Millipore® Laboratory Water Systems
LiquiPure® 1 Replacement Cartridges for Milli-Q® and
Alpha-Q ™ Laboratory Water Systems
The LiquiPure1 replacement cartridges for Milli-Q and Alpha-Q laboratory water systems
provide ultra-high-purity water with very low TOC and extractable levels. The cartridge
contains a variety of purification media to remove specific types of feed water
contaminants. All wetted parts are constructed of all-natural polypropylene to
minimize extractables, while a unique downflow design ensures optimum removal of
organic and inorganic impurities. A pigmented polypropylene exterior prevents light from
penetrating to minimize microbial growth. Cartridge contains macroreticular activated
carbon, ultra-high-purity mixed bed ion exchange resin, and an organic scavenger.
Siemens Catalog Number
Millipore Equiv. Part Number
LiquiPure 1 Cartridge
LP1000
LiquiPure 1 Cartridge w/0.2 µm Final Filter
LP2000
LC134
CPMQ004R1
CPMQ004D2
CPMQK05R1
CPMQK05D2
CPMQK05RE
MPGL04SK2
LiquiPure® CLC Replacement Cartridges for Millipore AFS® Analyzer Feed Systems
The LiquiPure CLC replacement cartridges for Millipore AFS Analyzer Feed systems provide high-purity
water to feed laboratory clinical chemistry analyzers. The cartridge contains ultra-high-purity
mixed bed ion exchange resin to produce NCCLS Type 1 quality water. All wetted parts are
constructed of all natural polypropylene to minimize extractables, while the unique design
ensures optimum removal of inorganic impurities. A pigmented polypropylene exterior prevents
light from penetrating to minimize microbial growth. Cartridge contains ultra-high-purity mixed
bed ion exchange resin.
LiquiPure CLC Cartridge
LP3000
LP3000R
CP4ALLRES
LP3000R
FCCFH11S2
CPAFS04R1
LP3000R & LP4000
FCCFH11S2
CP4ALLRES
CPKITAFS2
LiquiPure® RO Replacement Cartridges for Millipore Milli-RO®
and AFS® Systems
These duplex RO pretreatment cartridges for Millipore Milli-RO and AFS Analyzer Feed
systems includes granular activated carbon for chlorine removal, depth filtration for
particulate removal and a food grade sequestering agent to protect the RO membrane
from fouling and scale formation. Designed in a duplex configuration, the cartridge can be
rotated and reconnected when one-half has been exhausted. All wetted parts are
constructed of all natural polypropylene to minimize extractables, while the
pigmented polypropylene exterior prevents light from penetrating to minimize microbial
growth. Cartridge contains granular activated carbon, an anti-scaling agent and a prefilter.
LiquiPure RO Cartridge
LiquiPure RO Cartridge
Siemens
Catalog Number
LP4000
LP4000R
Millipore Equiv.
Part Number
CPR0P0402
CPR0P0402
Siemens
Water Technologies
BACK
145
Replacement Cartridges for Millipore®
Replacement Cartridges for Milli-Q® and Other Millipore Systems
High Capacity Carbon (4/pk)
Mixed Bed (2/pk), Exchange Capacity, 540 Grains as CaCO3
Organic Scavenger (1/pk)
UF Membranes, 10k MW (1/pk)
Prefilter 12" 5 µm
1 ea. DICM 1000-1 Carbon, 2 ea. DIMM 1200-2 Ion Exchange
CWCFF 1492 Capsule Final Filter (1ea.)
1 ea. DICM 1000-1 Carbon, 2 ea. DIMM 1200-2 Ion Exchange,
1 ea. DIOM 1200-1 Organic Scavenger, 1 ea. CWCFF1492
1 ea. DICM 1000-1 Carbon, 2 ea. DIMM 1200-2, 1 ea.
CWCFF1492, 1 ea. 10” Polysulfone 0.2 µm Cartridge
1 ea. FCWN12152, DICM 1000-1, DIMM 1200-1, DIOM 12001, CWCFF1492
Where Used
3, 4, 5 Bowl Milli-Q or Milli-Q Plus Systems
3, 4, 5 Bowl Milli-Q or Milli-Q Plus Systems
4 & 5 Bowl Milli-Q or Milli-Q Plus Systems
4 & 5 Bowl Milli-Q or Milli-Q Plus Systems
Milli-RO® Systems
4-Bowl Life Science or 3-Bowl Standard
CDFC01204
CPMB01202
CDEX01201
CDUF01201
CDPRM1206
CFUF01204
DICM1000-4
DIMM1200-2
DIOM1200-1
CDUF01201
FCR001205
LBCCM1202
4-Bowl Analytical System
CFOF01205
LBRCM1002
5-Bowl Milli-Q
CFIF01205
5-Bowl Milli-Q
CFOF012P5
LBCCM1202
FCWN010S2
FCWN010S2
DICM1000-1
DIMM1200-1
DIOM1200-1
CWCFF1492
Where Used
Where Used
Replacement Cartridges for Milli-Q® Ultrapure Water Systems
Organex Cartridge
Ionic Cartridge
Purification Pack (Elix, RO & Distillation Feed)
Purification Pack (DI Feed)
Pyroguard 5000 MW Hollow Fiber UF Cartridge
VOC Cartridge
Pretreatment Filter
Pretreatment Filter
Where Used
Milli-Q Academic, Biocel, Synthesis, Element, Gradient
Milli-Q Biocll, Synthesis
Milli-Q Academic, Biocel, Synthesis Element Gradient
Milli-Q Elix 3,5,10
Milli-Q Elix 3,5,10
Replacement Cartridge Kits for Millipore Super-Q® Systems
Activated Carbon (1/pk)
Ion Exchange (>2000 Grain Capacity) (1/pk)
Organic Scavenger (1/pk)
UF Cartridges
0.22 µm Filter 20" (1/pk)
Replacement RO Membranes for
Millipore Milli-RO® Plus and AFS® Systems
Siemens Catalog
Number
4-Bowl Super-Q (Housing #1)
4-Bowl Super-Q (Housing #2 & #3)
4-Bowl Super-Q (Housing #4)
4-Bowl Super-Q (Housing #4 optional)
4-Bowl Super-Q (Housing #4 optional)
TFC RO Membrane
TFC RO Membrane (w/out housing)
TFC RO Membrane (w/out housing)
CA Membrane
Milli-RO 4 & 15
Milli-RO 6-10 and AFS Systems
Milli-RO 30/60/90
Milli-RO 4 & 15
TFC RO Membrane
Milli-RO 60/120
QTUM00EX
QTUM00IX
QGARD00R1
QGARD00D2
CDUFHF05K
QTUM000VX
PROG00002
PROG00001
CDFC02203
CPMB02202
CDEX02201
CDUFM2201
CVDI02TPE
CDRC012S0
CDRC012HG
CDRCH12HG
CDRO012S0
SL2M129V8
60 - CDRC025S1
120 CDRC025S1
CDRC025SH
DIMOS1201
DIMEX1201
PPMRO1201
PPMDI1201
CQUF500
DICMVOL01
PRCM1201
PRCMS001
DICM2200-1
DIMM2200-1
DIOM2200-1
CDUF02201
FCDIO20S2
ROGTM3512
LABROKIT
LABROKIT
ROETM3512
60 - CDRC025S1
CDRC025S1
CDRC025SH
120
Siemens
Water Technologies
BACK
146
Replacement Cartridge kits for Barnstead®
Replacement Cartridge Kits for NANOpure™ and Other Barnstead Systems
Description
1 ea. CW0835 Colloid Removal Resin,
1 ea. CW0803 High Capacity 2-Bed Resin,
2 ea. CW0809 Mixed Bed
1 ea. CW0836 Organic Removal,
1 ea. CW0820 Organic Scavenger,
1 ea.CW0803 High Capacity 2-Bed Resin,
1 ea. CW0809 Mixed Bed,
1 ea. CW0820 Organic Scavenger,
1 ea. CW5021 Organic Scavenger, Down Flow
2 ea. CW3751 Final Filter
1 ea. CW0836 Colloid Removal,
1 ea. CW5021 Organic Scavenger, Down Flow,
2 ea. CW3751 Final Filter
Where Used
NANOpure 4 Module Type I
Barnstead Equiv.
Part Number
D3804
Siemens
Catalog Number
CW3804
NANOpure 3 Module Type I
D3805
CW3805
NANOpure 3 Module Type I w/ORGANICfree™
D3806
CW3806
NANOpure 4 Module Type I w/ORGANICfree
D3807
CW3807
Quad Style NANOpure Type I
D4801
CW4801
Quad Style NANOpure Type I w/ORGANICfree
D4802
CW4802
D5025
CW5025
Pretreated Feed
D5026
CW5026
Pretreated Feed
E-pure™ 4 Module Type I
D5028
CW5028
E-pure 3 Module Type I
D5029
E-pure 3 Module Type I w/ORGANICfree
D5022
CW5029
E-pure 4 Module Type I w/ORGANICfree
D5023
CW5023
CW5022
Barnstead replacement cartridges continued on next page
Siemens
Water Technologies
BACK
147
Replacement Cartridges for Barnstead®
Replacement Cartridge Kits for NANOpure™ and Other Barnstead Systems
Description
High Capacity, 2-Bed Ion Exchange
Mixed Bed Ion Exchange
Oxygen Removal Resin
Activated Carbon
Cation Removal Resin
Organic Scavenger Resin
Organic Scavenger, Down Flow
Mixed Bed, Organic Removal
Colloid, Organic Removal
Organic Removal
Oxygen Removal
Mixed Bed, Oxygen Removal, Organic Removal
Anion Removal
Mixed Bed, Down Flow
Organic Free Cartridge
Organic Cartridge Kit DI Feed
Pretreat Cartridge for Tap & DI Feed
Ultrapure Cartridge
Cartridge Kit for RO or Dist. Feed
Pretreatment DI Feed
Ultrapure Cartridge
0.2µm Filter
Organic Free Cartridge
Pretreatment Cartridge for Dist. or RO Feed
Ultralow Organics Cartridge for RO or Dist. Feed
Cartridge Pack Organic Free for DI Feed
Sanitization Cartridge
5µm Cartridge
Cartridge for RO Feed
Cartridge Kit for DI Feed
Where Used
NANOpure, E-pure™, B-pure™, Cooling Loops
NANOpure, B-pure, Older NANOpure Cooling Loops
B-pure, Cooling Loops
NANOpure II, Older NANOpure Systems
Quad Style NANOpure, E-pure
B-pure, Still Pretreatment
NANOpure, B-pure, E-pure
NANOpure, E-pure, Pretreatment for Organic Removal
Quad Style NANOpure, E-pure
NANOpure Infinity®
NANOpure Infinity
NANOpure Infinity
NANOpure Infinity
NANOpure Infinity
EASYpure®
EASYpure
EASYpure
EASYpure
EASYpure
Diamond™
Diamond
NANOpure®, G-pure, NANOpure Infinity®
NANOpure®, G-pure, NANOpure Infinity®
Diamond RO, Diamond TII
EASYpure
Diamond
Diamond
Barnstead Equiv.
Part Number
D0803
D0809
D0811
D0813
D0815
D0820
D5021
D0832
D0835
D0836
D8809
D8811
D0760
D5027
D50252
D50254
D50251
D50253
D50257
D50230
D50233
FL703X2
D50229
D50231
D50280
D50281
D50223
D50258
D502113
D50245
D50282
D50283
Siemens
Catalog Number
CW0803
CW0809*
CW0811
CW0813
CW0815
CW0820
CW5021
CW0832
CW0835
CW0836
CW8809
CW8811
CW0760
CW5027
CB50252
CB50254
CB50251
CB50253
CB50257
CB50230
CB50233
CB7033X2
CB50229
CB50231
CB50280
CB50281
CB50223
CB50258
CB502113
CB50245
CB50282
CB50283
* CW0809 — not for use with Bantam deionizers
Reverse Osmosis Membrane
DI Cartridge
Remote Dispenser Cross Flow Final Filter Quad Style
Replacement Ultrafilter Element for D4721
Ultrapure Ion Exchange
RO MPS Cartridge
Carbon Filter
Deionization
Deionization
Prefilter, 5µm
Pretreatment Carbon Cartridge
Membrane 15L/hr
RO Membrane
UF Cartridge
ULTROpure™ and ROpure™ LP
EASYpure II and RF/UV
Final Filters
Final Filters
NANOpure Quad., E-pure
NANOpure Diamond RO
NANOpure Diamond RO
EASYpure Systems
EASYpure II LF and UV
ROpure Infinity
ROpure Infinity
ROpure Infinity
NANOpure Diamond RO
NANOpure Diamond RO
D2732
D3750
D3751
D4722
D5021
D502114
D502115
D50229
D50245
D9004
D9005
D9006
FL1265X1
FL1192X1
CB2732
CW3750
CW3751
CB4722
CB5021
CB502114
CB502115
CB50229
CB50245
CB9004
CB9005
CB9006
CBFL1265X1
CBFL1192Y1
Siemens
Water Technologies
BACK
148
Replacement Cartridges for Barnstead®
Replacement Hose Nipple Cartridge Kits for Barnstead and Other Cartridge Housings
Where Used
Description
1/2 Size, Mixed Bed Oxygen Removal
High Capacity, 2 Bed
Mixed Bed
Pretreatment
Organic Removal
Mixed Bed (No Dye)
Organic Removal, Mixed Bed
2/3 Size, High Capacity Mixed Bed
180 Grains as CaCO3
1650 Grains as CaCO3
730 Grains as CaCO3
1450 Grains as NaCl to 1 megohm-cm Endpoint
730 Grains as CaCO3
575 Grains as CaCO3
1080 Grains as CaCO3
Barnstead Equiv.
Part Number
D8822
D8901
D8902
D8921
D8904
D8911
D8922
D8950
Siemens
Catalog Number
CW8822
CW8901
CW8902
CW8921
CW8904
CW8911
CW8922
CW8950
Note: Hose Nipple Cartridges are non-pressure applications; outlet must be vented to atmosphere, minimum inlet
pressure should be 5 psig (0.3 bar) and designed for 3/8" H.B. (9.5mm) connection.
Siemens
Water Technologies
BACK
149
LEAK DETECTORS
DI-SDI Alert Leak Detector
The DI-SDI Alert is a leak detector and alarm designed to sense deionized water leaks,
initiate an alarm and activate a shut-off valve assembly (not provided).
The device consists of a disk-shaped sensor that rests on the floor near the SDI tank
and a receptacle mounted alarm module with an internal alarm, an external LED
indicator and a 120 VAC grounded power outlet.
In normal operation, the sensor detects no leak and the green LED on the alarm
module remains illuminated and the 120 VAC grounded outlet remains powered.
The alarm condition is initiated when the sensor detects water leakage. The red LED
will be illuminated and the grounded outlet will be de-energized, thus initiating the
feed water shut-off device.
The DI-SDI Alert can be reset by simply shutting off the power to or unplugging the
alarm module.
Features & Benefits
• Provides around-the-clock protection against water damage
• Specially designed to sense small amounts of DI quality water
• Audible alarm, visible LED warning light, reliable power cut-off
• Fully automatic; failsafe operation; no maintenance
Specifications
Inlet Power
120V AC – 60 HZ
Cable Length
12 Feet
Power Output
(Sensor to Alarm Module)
120V, 15 AMP resistive load, and 1/2 HP motor load
Operational Warnings
For indoor use only!
If power to SDI leak detector is interrupted it will not function.
If power to SDI leak detector is interrupted and then restored, it will reset.
Siemens
Water Technologies
BACK
150
LEAK DETECTORS
WLD Model 300A Series
Water Leak Detector
The Model WLD 300A is designed to detect leaks of water or other conductive fluids. The WLD 300A is a cost-effective way
to monitor for leaks on or near commercial water treatment systems, or any location where an undetected leak could
cause damage.
The WLD 300A is designed with a number of unique features not normally found in low-cost water detection systems:
SENSITIVE DETECTION SYSTEM
• Designed with a sensitive detection circuit that allows detection of low conductivity fluids such as high purity water.
• An integral test feature allows the user to periodically test the action of the monitor to ensure proper operation.
OUTPUT FUNCTIONS
• 108 dB alarm horn and LED indicators
• Alarm silence and alarm reset push buttons
SENSOR CALIBRATION
• Two sensors may be connected in series for greater coverage
• May be calibrated for local conditions
REMOTE MONITORING VIA MODEM
• Can be interfaced with other products to provide remote
alarm notification via modem
ELECTRICAL CORD OPTION
• One drop cord (with standard three-prong receptacle) for the
load connected to one of the control relays.
Catalog No.
Description
ALWLD300A
ALWLD300AID
Leak Alarm w/one sensor
ALWLDAS
Alarm sensor
Leak Alarm w/one sensor
and one drop cord receptacle
SPECIFICATIONS
Display: Four LED indicator lights: one for power, one for alarm condition and two for relay states.
Controls: Four push button switches: alarm silence, alarm reset, calibration, and sensor test
Inputs: Leak detection sensor
Outputs: Alarm relay, DPDT (10 A @ 240 VAC) Control relays (2), DPDT (10 A @ 240 VAC) Horn, 108 dB
Operating Temperature: 0-50˚C
Operating Humidity: 0-95% RH non-condensing
Power Supply: 120 VAC, 4.6 VA, 60 Hz via internal transformer. Does not include loads on output relays.
Enclosure: NEMA 4X
Dimensions (Overall): 6.5" x 6.5" x 4.0"
Siemens
Water Technologies
BACK
151
5-Range Purity Light
This 5-range purity indicator is ideal for monitoring product water quality from DI and
other ultra-pure water purification systems. It offers 5-convenient
resistivity/conductivity ranges and uses a highly visible LED indicator that changes from
green to red when the product water quality falls below the selected cutoff point.
Materials
Body . . . . . . . . . . . .
Cap material. . . . . .
Sensor pins . . . . . .
Power . . . . . . . . . . . . .
Display. . . . . . . . . . . . .
Power cable. . . . . . . . .
Electrical connection . .
Accuracy . . . . . . . . . . .
Relative humidity . . . . .
Water temperature. . . .
Pressure . . . . . . . . . . .
Black Noryl
Clear ABS
Gold-plated brass
Power pak source: 115 VAC
Power pak output: 6 VAC
LED (one red & one green)
10'
Spade lugs to screw terminals
±10% at 25°C
to 90%
+5°C to 45°C
0-150 psi
Dimensions
Height . . . . . . . . . . . . .
Diameter . . . . . . . . . . .
Fittings . . . . . . . . . . . . .
4.5" ± 0.5" from pins to top of cap
1.29" ± 0.25"
1/2" and 9/16"
Resistivity/Conductivity Ranges
Jumper Position
Set Point
J1 . . . . . . . . . . . . . .
50K ohms-cm (20 µS/cm)
J2 . . . . . . . . . . . . . .
J3 . . . . . . . . . . . . . .
J4 . . . . . . . . . . . . . .
1 megohm-cm (1 µS/cm)
no jumper . . . . . . . .
2 megohm-cm (0.5 µS/cm)
Catalog No.
ZWDJ05408*
ZWDJ05411*
ZWDJ05421*
ZWDJ05422*
ZWDJ05429*
ZWDJ05433*
Description
5-Range Light with transformer
5-Range Light without transformer
Transformer
Remote 5-Range Light with 8' cord
and mounting bracket
*Not for use as final quality indicator in hemodialysis applications
Siemens
Water Technologies
BACK
152
Hy-Lite Water Quality Indicator System
Inexpensive water quality indicator system to monitor DI water quality either at the
DI tanks or up to 700 feet away.
Features
• Automatic temperature compensation
• Safe 12 VDC
• Easy 1/2" or 3/4" connections
• Audible alarm option
• Five set points available (25K, 50K, 200K, 1 meg, 2 meg ohm/cm)
• Steady green/flashing red LED display
• Output port for relay and remote alarm modules
Catalog No.
ZWDJHLS025K
ZWDJHLS050K
ZWDJHLS200K
ZWDJHLS1MEG
ZWDJHLS2MEG
ZWDJHLA025K
ZWDJHLA050K
ZWDJHLA200K
ZWDJHLA1MEG
ZWDJHLA2MEG
ZWDJHYTRANA
ZWDJHYPC
ZWDJRMA
ZWDJRMAR
ZWDJRMR
ZWDJRPCO50
ZWDJRPC100
ZWDJRPC200
Description For Use in Dialysis
25K Lite - No audible alarm
1Meg Lite - No audible alarm
2Meg Lite - No audible alarm
25K Lite - Audible alarm*
1Meg Lite - Audible alarm*
2Meg Lite - Audible alarm*
115VAC/12VDC Transformer
Hy-Lite to Hy-Lite Patchcord
Remote Alarm Module
Remote Alarm Module with Auto Re-Alarm*
Relay Module
50 ft. Hy-Lite to Module Cable
*For dialysis use only, add ZWDJRMAR module for Remote Monitoring
Siemens
Water Technologies
BACK
153
LIQUID LEVEL CONTROLS
Tank Level Controls
Siemens tank level controllers are designed to control the on/off action of a
water system feeding a storage tank, as well as control the on/off of a booster
pump located at the discharge side of a storage tank. There are a variety of level
controllers available to satisfy a wide array of application needs.
• Each unit comes with three independently adjustable switches that can control
the action of three devices
• Switches are activated by the changing liquid level in the reservoir as sensed by
the units diaphragm sensor.
Pressure Connection . . . . . . . . .
Electrical Connection . . . . . . . . .
Switches. . . . . . . . . . . . . . . . . . .
Mounting . . . . . . . . . . . . . . . . . .
System Dimensions
H x W x D (inches). . . . . . . . . . .
Catalog Number:
Diaphragm . . . . . . . . . . . . . . .
Bellow and Connection . . . . . .
Adjustable Range . . . . . . . . . .
Deadband . . . . . . . . . . . . . . . .
1/4" NPTF
3 - 7/8" diameter knockouts
3 - SPDT, 15 amp,
125/250/480 VAC
In fixed position near reservoir
via attached bracket
41⁄4x51⁄4x43⁄4
ZRLC02003
Buna-N
#380 alloy
aluminum
0-80" water
column
2.0–6.0"
water column
ZRLC02004
Teflon®
316 stainless
steel
0-80" water
column
3–7" water
column
ZRLC02005
ZRLC02006
0.1–0.6 psi
0.1–0.6 psi
Teflon®
316 stainless
steel
0–20 psi
Buna-N
#380 alloy
aluminum
0–20 psi
Siemens
Water Technologies
BACK
154
METERS (CONDUCTIVITY /RESISTIVITY)
Thornton 200CR(S) Conductivity/Resistivity
Meters
The Thornton 200CR and 200CRS are flexible meters allowing the user to
configure the instrument to measure in the engineering units preferred by the
operator. An operator no longer needs to use one model for conductivity and
another for resistivity, percent rejection (200CR) or a specific range of
measurement.
• Measures conductivity (1 S/cm to 0.02 µS/cm), resistivity (1.0Ω-cm to 50.0MΩcm), Temperature (–10 to 140°C and/or +14 to 284°F), TDS, (ppm/ppb), Percent
rejection (0-99%), Difference (A–B, B–A), Ratio (A/B, B/A), % chemical
concentration for HCl, H2SO4, NaOH. Each of two channels can be set up to
measure two of these parameters. A total of four different measurements can
be programmed.
• Wide measurement range; Backlit LCD display
• NEMA 4X housing and cable connectors. 200 foot sensor cable per channel
• Designed to meet CDS/NRTL standards, calibration with NIST traceability
Model 200CR - Two channel monitoring
Model 200 CRS - Single channel monitoring
Catalog No.
200CR Res/Con Meter 115VAC . . . . . . . . . . . .
200CR Meter w/4-20 mA 115VAC . . . . . . . . . . .
200CR Meter w/4 SS Relays & 4-20 mA 115VAC
200CRS Meter w/2 Relays & 4-20 mA 115VAC
200CRS Package (w/Cord & Sensor) . . . . . . . .
0.1C Sensor 200 CR
Titanium/Ryton (1.35") 3/4" NPT . . . . . . . . . .
Titanium/Ryton (5.19") 3/4" NPT . . . . . . . . . .
Monel/Ryton (1.35") 3/4" NPT . . . . . . . . . . . .
Monel/Ryton (5.19") 3/4" NPT . . . . . . . . . . . .
Titanium/PEEK (1.35) 3/4" NPT Ozone . . . . .
Titanium/PEEK (5.19") 3/4" NPT Ozone . . . .
Titanium/Noryl (1.14" insertion length) 1/2" NPT
Titanium/Noryl (1.14" insertion length) 3/4" NPT
Titanium/PEEK 1.5" Tri-clamp . . . . . . . . . . . .
316LSS/PEEK 1.5" Tri-clamp Pharm. . . . . . .
Titanium/PEEK 2" Tri-clamp. . . . . . . . . . . . . .
316LSS/PEEK 2" Tri-clamp . . . . . . . . . . . . . .
200CR(S) Patch Cord 1' . . . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 5' . . . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 10' . . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 25' . . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 50' . . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 100' . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 150' . . . . . . . . . . . . . . . .
200CR(S) Patch Cord 200' . . . . . . . . . . . . . . . .
NEMA rear enclosure . . . . . . . . . . . . . . . . . . . .
Pipe mounting bracket. . . . . . . . . . . . . . . . . . . .
800 Series instrument adapter plate . . . . . . . . .
High res/low cond calib kit (calib #1 & #2) . . . .
Low res/high cond calib kit (calib #3 & #4) . . . .
Complete calibration kit (contains all 4 calibrators)
Individual calibrator #1–4 Mohm/104°C . . . . . .
Individual calibrator #2–100,000 Ohm/0°C . . . .
Individual calibrator #3–20,000 Ohm/104°C . . .
Individual calibrator #4–1,000 Ohm/0°C . . . . . .
18.18MW-cm @ 25°C Verifier . . . . . . . . . . . . . .
Siemens
Water Technologies
ZMET62201
ZMET62221
ZMET62421
ZMET61221
ZPAK58021122
ZCEL240201
ZCEL240202
ZCEL240203
ZCEL240204
ZCEL240205
ZCEL240206
ZCEL240213
ZCEL240214
ZCEL243201
ZCEL243203
ZCEL243205
ZCEL243207
ZCOR100166
ZCOR100566
ZCOR101066
ZCOR102566
ZCOR105066
ZCOR111066
ZCOR111566
ZCOR112066
P92470
ZAC100063
ZAC100064
ZCAL186501
ZCAL186502
ZCAL186503
ZCAL186401
ZCAL186402
ZCAL186403
ZCAL186404
ZCAL186504
BACK
Power . . . . . . . . . . . . . . . . . . .
Operating Temp.. . . . . . . . . . .
Humidity . . . . . . . . . . . . . . . . .
Ranges. . . . . . . . . . . . . . . . . .
Accuracy . . . . . . . . . . . . . . . .
Repeatability . . . . . . . . . . . . .
Temp. Accuracy . . . . . . . . . . .
Relays . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . .
Enclosure . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . .
Keypad . . . . . . . . . . . . . . . . . .
Setpoints . . . . . . . . . . . . . . . .
Measurement
Update Rate . . . . . . . . . . . . . .
Two Analog. . . . . . . . . . . . . . .
Output Signals
Analog Output Accuracy . . . .
Serial Output . . . . . . . . . . . . .
Sensor Patch Cord
Length . . . . . . . . . . . . . . . . . .
Temp.Compensation . . . . . . .
90-130 VAC or 180-250 VAC to 24 VDC;
12 W max; 50/60 Hz
–10 to 55°C (14 to 131°F)
0-95% RH (non-condensing)
High-purity – 0.1 constant cell
0.02 µS/cm to 750 µS/cm
0.0013 mΩ-cm to 50 MΩ-cm
TDS: 0-62.5 k ppm (as NaCl)
Temperature: -40°C to 140°C
±0.5% of reading up to 18 Magohm-cm
±0.1% for resistance and ±0.075°C for temperature
±0.25°C of reading
2 SPDT relays, each rated for max of 5 amp up to
30VDC or 250 VAC; 4 solid state, each rated for
max 1.5 amp, 250 VAC 50mA min current
1 line, 16 character backlit LCD (4.8mm x 9.6mm)
ABS-PC alloy; panel cut required 3.78 x 7.56" DIN
1.9 lb (0.9 kg)
11 tactile feedback keys
4 controlled setpoints can be set as low or high limit. Any
setpoint can be programmed to operate up to
4 output relays.
Once per second
Output value is proportioned to the selected
measurement signal. Outputs scaled from 4-20 mA;
500 ohm load max.
0.01 mA
RS232/max distance 500 ft; RS422/max distance 4K ft. Field
selectable up to 19.2 k band.
Max. distance sensor to meter is 200 ft. Patch cord is required
for each sensor.
Automatic, reference to 25°C for resistivity, conductivity,
percent rejection and TDS.
155
METERS (TOTAL ORGANIC CARBON)
Thornton Total Organic Carbon System
The Thornton Total Organic Carbon (TOC) system is comprised of the 770MAX
multi parameter analyzer transmitter and the 5000TOC Sensor. The sensor /
analyzer uses proven ultraviolet oxidation with differential conductivity to
effectively measure TOC concentrations. The smart sensor design minimizes setup time to just minutes while the continuous flow design provides rapid TOC
response which are far superior then traditional batch measurement systems.
Benefits:
• No gases or reagents to handle, store or replace. No moving parts minimize
routine maintenance and service intervals.
• Sensor concept allows easy and economical integration into water purification
make-up and distribution systems.
• Easily added to existing APEX™ or PreVUE® systems which currently use
770MAX controller
• Meets USP <643>, <645> and EP 2.2.44 requirements for Pharmaceutical
Industry
• Ultra low TOC detection (< 1 ppb) for UPW water applications to continuously
monitor critical organic levels in semiconductor make-up, distribution and
process systems
• Compact, sealed NEMA 4 enclosure for demanding industrial environments
• 770MAX can accommodate additional sensor measurements for a total of 6
sensors including conductivity / resistivity TOC, temperature, flow, pH, DO, ORP,
and ozone.
Measurement Range 0.05 -1000 (ppb C)
Repeatability + 0.05 ppb C < 5 ppb + 1.0% > 5 ppb
Accuracy +0.1 ppb C for TOC
Resolution 0.001 ppb C
Analysis Time Continuous
Response Time < 60 seconds
Limit of Detection 0.025 ppb C
Conductivity Cell Constant Accuracy +2%
Temperature Sensor Pt1000 RTD, Class A
Temperature Accuracy +0.25˚C @ 25˚C
SAMPLE WATER REQUIREMENTS
Temperature - 0 to 90˚C
Particle Size - 100 micron
Minimum Water Quality – 0.5 M-Ohm (2.0 vS/cm)
Flow Rate – 20mL/min
Pressure – 15 to 100 psig at sample inlet connection
Catalog No.
Description
Z5TOC58079510
Thornton TOC system, 110V (includes 5000TOC Sensor,
770MAX Analyzer /Transmitter, and 25" patch cord)
Replacement UV Lamp
ZPAK58036013
Z5TOC58091534
Z5TOC58091526
Z5TOC58091529
Z5TOC58091527
* perishable – max 4-week shelf life
Standard
Pharmaceutical Options
System Suitability/Calibration Test kit
System Suitability Standards*
Calibration Standards * (500 ppb & 250 ppb)
Validation Support Documents
GENERAL SPECIFICATIONS
Overall Dimensions – 11" W x 7.4" H x 5.25" D
Sample Connections – Inlet 0.125" (3mm) O.D. compression-type (femule)
tube connection with 0.25 adapter
Outlet 0.25" (6mm) O.D. Barb connection
Siemens
Water Technologies
BACK
156
MULTIMEDIA FILTERS
AVGF® Gravity Filters
Flow Rates from 14 to 1,472 gpm
AVGF® Gravity Filters operate automatically without a single valve, backwash pump,
flow control or other instrumentation. Nothing moves but the water. The design
and performance of the AVGF® filter has been proven through years of continuous
use at hundreds of water treatment facilities worldwide. Widely used in
pretreatment plants for boiler feedwater, generating stations, pulp and paper mills
and chemical plants, the AVGF® filter is also approved by a majority of states for
treatment of potable water supplies.
• For process water, potable water, iron removal and cooling tower sidestreams
• Requiring little labor or maintenance, the AVGF® filter operates by itself – filtering,
backwashing, rinsing and returning to service without the use of valves, timers or
switches
• Unique design, including the discharge of filtered water above the filter bed,
results in consistent high-quality effluent water
• The AVGF® filter rinse water is not discharged to drain, but stored and used for
the next backwash cycle to save water
Model Number
Flow Rate
2 gpm/sq. feet . . . . . . . . . . . .
3 gpm/sq. feet. . . . . . . . . . . .
Wash Water Flow Rate. . . . . . .
System Dimensions
Filter Tank Diameter (feet) . . . .
.........................
.........................
Pipe Size
Inlet/Outlet . . . . . . . . . . . . . . . .
Drain . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
Industrial
lb.
kg
Municipal
lb.
kg
............
............
............
............
Model Number
Flow Rate
2 gpm/sq. feet . . . . . . . . . . . .
3 gpm/sq. feet. . . . . . . . . . . .
Wash Water Flow Rate . . . . .
System Dimensions
Filter Tank Diameter (feet) . . . .
.........................
.........................
Pipe Size
Inlet/Outlet . . . . . . . . . . . . . . . .
Drain . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
Industrial
lb.
kg
Municipal
lb.
kg
............
............
............
............
AVGF-3
14 gpm
21 gpm
147 gpm
AVGF-4
AVGF-5
AVGF-6
AVGF-7
AVGF-8
AVGF-9
AVGF-10
AVGF-11
25 gpm
38 gpm
263 gpm
39 gpm
59 gpm
412 gpm
56 gpm
85 gpm
594 gpm
77 gpm
115 gpm
809 gpm
100 gpm
151 gpm
1,056 gpm
127 gpm
191 gpm
1,336 gpm
157 gpm
236 gpm
1,649 gpm
190 gpm
285 gpm
1,995 gpm
3'
4'
5'
6'
7'
8'
9'
10'
11'
Remaining dimensions vary depending on type and tank diameter. Please request a product specification sheet for dimensions,
overall height is 252".
2"
6"
2-1/2"
8"
3"
8"
4"
10"
4"
10"
6"
12"
6"
12"
6"
14"
8"
14"
2,600
1,179
3,400
1,542
3,500
1,588
4,200
1,905
4,400
1,996
5,400
2,450
5,400
2,449
6,500
2,948
6,300
2,858
7,500
3,402
7,300
3,311
9,000
4,082
8,500
3,856
10,400
4,717
9,700
4,400
11,500
5,216
11,200
5,080
14,100
16,396
AVGF-13
AVGF-14
AVGF-15
AVGF-16
AVGF-18
AVGF-20
AVGF-22
AVGF-25
265 gpm
398 gpm
2,787 gpm
308 gpm
462 gpm
3,232 gpm
353 gpm
530 gpm
3,711 gpm
402 gpm
603 gpm
4,223 gpm
509 gpm
763 gpm
5,345 gpm
629 gpm
943 gpm
6,598 gpm
760 gpm
1,140 gpm
7,982 gpm
982 gpm
1,472 gpm
10,300 gpm
AVGF-12
226 gpm
339 gpm
2,373 gpm
12'
13'
14'
15'
16'
18'
20'
22'
25'
Remaining dimensions vary depending on type and tank diameter. Please request a product specification sheet for dimensions,
overall height is 252".
8"
14"
8"
15"
8"
16"
10"
18"
10"
18"
10"
20"
12"
24"
12"
24"
14"
30"
12,200
5,534
15,600
7,076
13,700
6,214
17,400
7,893
15,100
6,849
19,700
8,936
16,100
7,303
22,300
10,124
17,300
7,847
25,000
11,340
21,200
9,616
30,100
13,653
25,200
11,430
34,800
17,237
29,000
13,154
41,500
18,825
34,500
15,550
48,300
21,908
Siemens
Water Technologies
For Permutit® products and information contact 908.704.9027.
BACK
157
MULTIMEDIA FILTERS
KF Series Multimedia Filters
KF Series Multimedia Filters are ideal for commercial and light industrial filtration
applications where the advantages of a lightweight, corrosion-resistant FRP pressure
vessel and cost-effective top mounted valve are desirable.
• Tank liners are blow molded plastic wrapped with high-strength epoxy resin and
fiberglass for worry-free service
• Includes a motorized control valve that is quiet, efficient and dependable
• Electromechanical timer allows automatic backwash
• Includes a pretreatment lock-out switch assembly to deactivate downstream equipment
during backwash
Requires field assembly.
Series KFZMS
Tank Size
D x H (in)
10x40
12x52
14x65
16x65
18x65
21x62
24x72
30x72
36x72
Pipe
Size (in)
1.0
1.0, 1.5
1.0, 1.5
1.0, 1.5
1.0, 1.5
1.5, 2.0
1.5, 2.0
2.0
2.0
APPLICATIONS
Commercial
RO-Feed*
Service Flow Service Flow
5 gpm
8 gpm
10 gpm
14 gpm
18 gpm
24 gpm
32 gpm
49 gpm
70 gpm
*Flow is based on 8 gpm/ft2
Catalog Number:
System Name . . . . . . . . . . .
KFZMS
KFZMS
4 gpm
6.4 gpm
8 gpm
11.2 gpm
14.4 gpm
19.2 gpm
25.6 gpm
39.2 gpm
56 gpm
XXX
Backwash
Flow
8 gpm
12 gpm
15 gpm
20 gpm
25 gpm
35 gpm
45 gpm
70 gpm
100 gpm
F
Media
Volume (ft3)
1.0
1.6
2.1
2.9
4.0
4.9
6.9
10.0
14.5
Dimensions Shipping Weight
LxDxH (in)
lb (kg)
10x10x50
12x12x63
14x14x76
16x16x76
18x18x75
21x21x74
24x24x90
30x30x96
36x36x97
X
160 (73)
320 (146)
469 (213)
630 (286)
670 (304)
1110 (504)
1500 (681)
1570 (713)
2130 (967)
Z
F
X
010, 012, 014,
016, 018, 021,
Pressure Vessel Diameter (in inches) . . . . . . . . . . 024, 030, 036
Pressure Vessel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F = non-code, fiberglass
Control Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X = Std NEMA 3R equivalent
Level of Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z = Stand alone
A = 1.0"
Backwash/Regeneration Initiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = Timeclock NEMA 3R (equivalent) B = 1.5"
Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C = 2.0"
X
X = No
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Options
These filters are also available as duplex units. Please contact our Technical Support team for more information.
†All sizes not available with every tank size.
BACK
Siemens
Water Technologies
158
MULTIMEDIA FILTERS
VP Series Multimedia Filters
VP Series Multimedia Filters are a low cost, reliable and efficient way to purify water.
These rugged, pre-engineered, pre-assembled units minimize installation and startup costs and are ideal for boiler feed, process water or rinse water applications.
• VPEF denotes non-ASME code vessels offered with express delivery
• VPAF denotes ASME code vessels with stamp available
• Structural steel legs (seismic zone 4) provide rigid support of vessel for safety
• Skid mount (seismic zone 4) with structural steel beams for duplex systems
• Standard epoxy internal and external coating extends vessel life
• Schedule 80 PVC piping enhances corrosion-resistance
Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Good. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Better. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Best. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backwash Flow Rate. . . . . . . . . . . . . . . . . . . . . . . .
Media (cubic feet)* . . . . . . . . . . . . . . . . . . . . . . . . . .
System Dimensions**
Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Column Size (D x H) . . . . . . . . . . . . . . . . . . . . . . . .
inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
**H x W x D Simplex (Duplex) – inch . . . . . . . . . .
**H x W x D Simplex (Duplex) –cm . . . . . . . . . . .
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lb. – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . .
kg – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . .
Operating Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Requirements. . . . . . . . . . . . . . . . . . . . . .
Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Good. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Better. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Best. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backwash Flow Rate. . . . . . . . . . . . . . . . . . . . . . . .
Media (cubic feet)* . . . . . . . . . . . . . . . . . . . . . . . . . .
System Dimensions**
Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Column Size (D x H) . . . . . . . . . . . . . . . . . . . . . . . .
inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H x W x D Simplex (Duplex) – inch . . . . . . . . . . .
H x W x D Simplex (Duplex) –cm . . . . . . . . . . . . .
Shipping Weight
lb. (kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Weight
Electrical Requirements. . . . . . . . . . . . . . . . . . . .
VPEF/VPAF-024
VPEF/VPAF-630
VPEF/VPAF-636
VPEF/VPAF-742
1-1/2”
2”
2-1/2”
2-1/2”
1,530 (3,060)
694 (1,388)
2,240 (4,480)
1,017 (2,033)
50
40
25
47
7.8
70
60
40
74
13.3
24x48
61x122
76x42x41 (80x97x41)
193x107x104 (204x246x104)
30x60
77x153
90x42x48 (94x97x48)
229x107x123 (239x246x122)
105
85
55
106
17.7
140
115
75
144
24.0
36x60
92x153
96x40x55 (97x97x57)
244x102x140 (247x246x145)
3,410 (6,820)
1,547 (3,094)
42 x 72
107x183
112x43x60 (116x133x60)
285x109x152 (295x338x152)
4,820 (9,640)
2,186 (4,372)
2,330 (4,660)
3,500 (7,000)
5,600 (11,200)
7,800 (15,600)
1,057 (2,114)
1,588 (3,176)
2,541 (5,081)
3,538 (7,076)
110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VPEF/VPAF-648
VPEF/VPAF-754
VPEF/VPAF-760
VPEF/VPAF-772
185
150
100
188
31.4
235
190
125
239
39.8
290
230
150
295
49.1
48x60
122x153
106x58x67 (106x133x67)
269x147x170 (269x338x170)
54x72
139x183
121x61x75 (123x158x75)
307x155x191 (312x401x191)
60x72
153x183
125x68x88 (127x158x88)
318x173x224 (323x401x224)
3”
6,200 (12,400)
2,813 (5,625)
3”
8,300 (16,600)
3,765 (7,530)
4”
10,435 (20,870)
4,733 (9,466)
420
335
225
424
70.6
4”
72x72
183x183
125x68x88 (131x158x100)
318x173x224 (333x401x254)
14,980 (29,960)
6,795 (13,590)
10,160 (20,320)
13,320 (26,640)
16,765 (33,530)
24,110 (48,220)
4,609 (9,217)
6,042 (12,084)
7,604 (15,208)
10,936 (21,872)
110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*Filtration media includes 18" of Anthracite (0.85-0.95 mm), 8" of Filter Sand (0.45-0.55 mm) and 4" of Garnet (0.3 mm).
**Approximate
VP Series Multimedia Filters have extensive option packages. For ordering instructions, or additional product information, please contact technical support at 800.875.7873 extension 5000.
Siemens
Water Technologies
BACK
159
PUMPS, CENTRIFUGAL
Multiple Stage Centrifugal Booster Pumps
Victaulic® Type Pumps
Vertical, multi-stage centrifugal pumps are designed with the motor mounted directly on top
of the pump housing to minimize footprint. Pump suction/discharge chamber, impellers,
pump shaft, diffuser chambers, outer discharge sleeve, and impeller seal ring retainers are
constructed of 316 stainless steel. The motor stool is constructed of cast iron and is isolated
from the process fluid by a 316 stainless steel insert. Each pump is equipped with a high
temperature mechanical seal assembly. Pumps are capable of operating at continuous
temperatures up to 250°F (121°C). The pump motor is sized to ensure non-overloading when
operating on the pump curve. Motors are totally enclosed fan cooled (TEFC), with NEMA C
face designs that provide a minimum service factor of 1.15. Lower motor bearings are
adequately sized to ensure long motor life.
SPECIFICATIONS – please contact Technical Support to obtain pump curves
MODEL NUMBER
CRN3-3
CRN3-4
CRN3-5
CRN3-7
CRN3-8
CRN3-10
MODEL NUMBER
Catalog Number . . . . . . . . . . . . . . . . .
Nominal Flow Rate (gpm) . . . . . . . . . .
Pump Efficiency . . . . . . . . . . . . . . . . .
Max Discharge Head (psi) . . . . . . . . .
Max Oper Pressure (psi) . . . . . . . . . .
Min Continuous Flow (gpm) . . . . . . . .
Nameplate Horsepower . . . . . . . . . . .
Motor Type/Service Factor . . . . . . . . .
Shipping Weight (lb) . . . . . . . . . . . . . .
Pump Configuration . . . . . . . . . . . . . .
Materials of Construction . . . . . . . . . .
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . .
GPC96083742 GPC96083744 GPC96083746 GPC96083750 GPC96083752 GPC96083756
15 @ 35 psi
15 @ 39 psi
15 @ 52 psi 15 @ 71 psi
15 @ 95 psi
15 @ 104 psi
58%
58%
58%
58%
58%
58%
41
54
69
95
108
136
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
1.5
1.5
1.5
1.5
1.5
1.5
0.5 HP
0.75 HP
0.75 HP
1.5 HP
1.5 HP
2.0 HP
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
50.5
48.4
48.9
63.5
66.3
73
208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
316 stainless steel with mechanical silicon carbide seal faces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1/4-inch Victaulic type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number . . . . . . . . . . . . . . . . .
Pump Efficiency . . . . . . . . . . . . . . . . .
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . .
30 @ 28 psi
30 @ 52 psi
30 @ 63 psi 30 @ 74 psi
30 @ 82 psi
30 @ 106 psi
65%
65%
65%
65%
65%
65%
41
69
84
97
113
141
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
3
3
3
3
3
3
1 HP
1.5 HP
2 HP
3 HP
3 HP
3 HP
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
50.5
65.9
71.9
91.2
92.8
94.6
208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1/4-inch Victaulic type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number
Rated Flow (gpm)
Pump Efficiency
Max Discharge Head (psi)
Max Oper Pressure (psi)
Min Continuous Flow (gpm)
Nameplate Horsepower
Motor Type/Service Factor
Shipping Weight (lb)
Inlet/Outlet Victaulic Style. . . . . . . . . .
GPC96523104 GPC96523105 GPC96523106 GPC96523255 GPC96523707 GPC96523708 GPC96523710
53 @ 31 psi
53 @ 49 psi
53 @ 65 psi
53 @ 83 psi
90 @ 66 psi
90 @ 89 psi
90 @ 130 psi
70%
70%
70%
70%
70%
70%
70%
40
65
85
105
85
105
170
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
5.5
5.5
5.5
5.5
8.5
8.5
8.5
1.5 HP
3 HP
3 HP
5 HP
5 HP
7.5 HP
10 HP
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
101
139
141
164
159
184
223
208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-inch Victaulic type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL NUMBER
Victaulic Sets
Victaulic Connector Set Available
Victaulic Connector Set Available
CRN5-3
CRN5-5
CRN5-6
CRN5-7
CRN5-8
CRN5-10
CRN10-2
CRN10-3
CRN10-4
CRN10-5
CRN15-3
CRN15-4
Size
1-1/4"
2"
CRN15-7
GPC96523711
90 @ 156 psi
70%
195
360 psi
8.5
15 HP
TEFC/1.15
278
Catalog No.
P90348
P90349
High Capacity Pumps available. Call Technical Support.
BACK
CRN15-6
Siemens
Water Technologies
160
PUMPS, CENTRIFUGAL
Multiple Stage Centrifugal Booster Pumps
ANSI Flange
Vertical, multi-stage centrifugal pumps are designed with the motor mounted directly on
top of the pump housing to minimize footprint. Pump suction/discharge chamber,
impellers, pump shaft, diffuser chambers, outer discharge sleeve, and impeller seal ring
retainers are constructed of 316 stainless steel. The motor stool and flanges are
constructed of cast iron and are isolated from the process fluid by 316 stainless steel
inserts. Each pump is equipped with a high temperature mechanical seal assembly.
Pumps are capable of operating at continuous temperatures up to 250°F (121°C). The
pump motor is sized to ensure non-overloading when operating on the pump curve.
Motors are totally enclosed fan cooled (TEFC), with NEMA C face designs that provide a
minimum service factor of 1.15. Lower motor bearings are adequately sized to ensure
long motor life.
MODEL NUMBER
CRN3-3
CRN3-4
CRN3-5
CRN3-7
CRN3-8
CRN3-10
CRN5-3
CRN5-5
CRN5-6
CRN5-7
CRN5-8
CRN5-10
CRN10-2
CRN10-3
CRN10-4
CRN10-5
CRN15-3
CRN15-4
Catalog Number . . . . . . . . . . . . . . . . .
Pump Efficiency . . . . . . . . . . . . . . . . .
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . .
15 @ 35 psi
15 @ 39 psi
15 @ 52 psi 15 @ 71 psi
15 @ 95 psi
15 @ 104 psi
58%
58%
58%
58%
58%
58%
41
54
69
95
108
136
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
1.5
1.5
1.5
1.5
1.5
1.5
0.5 HP
0.75 HP
0.75 HP
1.5 HP
1.5 HP
2.0 HP
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
58.4
56.3
56.9
72.5
75.4
80.9
208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1/4-inch ANSI Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number . . . . . . . . . . . . . . . . .
Pump Efficiency . . . . . . . . . . . . . . . . .
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . .
30 @ 28 psi
30 @ 52 psi
30 @ 63 psi 30 @ 74 psi
30 @ 82 psi
30 @ 106 psi
65%
65%
65%
65%
65%
65%
41
69
84
97
113
141
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
3
3
3
3
3
3
1 HP
1.5 HP
2 HP
3 HP
3 HP
3 HP
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
58.4
74.9
79.8
99.1
100.7
102.5
208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1/4-inch ANSI Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number
Rated Flow (gpm)
Pump Efficiency
Max Discharge Head (psi)
Max Oper Pressure (psi)
Min Continuous Flow (gpm)
Nameplate Horsepower
Motor Type/Service Factor
Shipping Weight (lb)
Inlet/Outlet . . . . . . . . . . . . . . . . . . . . .
GPC96523118 GPC96523119 GPC96523120 GPC96523265 GPC96523718 GPC96523719 GPC96523721
53 @ 31 psi
53 @ 49 psi
53 @ 65 psi
53 @ 83 psi
90 @ 66 psi
90 @ 89 psi
90 @ 130 psi
70%
70%
70%
70%
70%
70%
70%
40
65
85
105
85
105
170
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
360 psi
5.5
5.5
5.5
5.5
8.5
8.5
8.5
1.5 HP
3 HP
3 HP
5 HP
5 HP
7.5 HP
10 HP
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
110
150
152
175
170
194
234
208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
316 stainless steel with cast iron flange and base plate* and mechanical silicon carbide seal faces . . . . . . . . . .
2-inch ANSI Flange type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL NUMBER
MODEL NUMBER
CRN15-6
*Cast iron flange and base plate does not come in contact with pumped liquid.
High Capacity Pumps available. Call Technical Support.
Siemens
Water Technologies
BACK
CRN15-7
GPC96523722
90 @ 156 psi
70%
195
360 psi
8.5
10 HP
TEFC/1.15
370
161
PUMPS, FEEDWATER BOOSTER
Feedwater Booster Pumps
Siemens feedwater booster pumps are close-coupled, single stage, end suction design
capable of being serviced without disturbing piping connections. The pump casings are
self venting, with a center line discharge design, and are fabricated of 304 stainless
steel casing seal ring. The enclosed-type impeller is constructed of 304 stainless steel. It
is dynamically balanced, keyed to the steel shaft and secured by a 304 stainless steel
capscrew.
The liquid cavity is sealed off at the pump shaft by an internally flushed mechanical seal
with stainless steel metal parts, Buna-N elastomers and carbon to ceramic faces,
suitable for continuous operation at 225°F. A replaceable, aluminum-bronze, shaftsleeve completely covers the wetted area under the seal. Pumps are rated for 125 psi
(175 psi for Series 3531 Pumps) working pressure. All casings have a drain tapping.
Pump motors meet NEMA specifications, are totally enclosed fan cooled (TEFC), have
heavy-duty grease-lubricated ball bearings, and are sized to be non-overloading over the
entire pump range.
SPECIFICATIONS*
3530 Series/MODEL NUMBER
Catalog Number . . . . . . . . . . . . . . . . .
Design Capacity (gpm). . . . . . . . . . . .
Pump Efficiency . . . . . . . . . . . . . . . . .
Motor Horsepower . . . . . . . . . . . . . . .
Power at Full Load (KW) . . . . . . . . . .
Inlet. . . . . . . . . . . . . . . . . . . . . . . . . . .
Outlet . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (WxLxH) inches . . . . . . .
3531 Series/MODEL NUMBER
Catalog Number . . . . . . . . . . . . . . . . .
Design Capacity (gpm). . . . . . . . . . . .
Pump Efficiency . . . . . . . . . . . . . . . . .
Motor Horsepower . . . . . . . . . . . . . . .
Power at Full Load (KW) . . . . . . . . . .
Inlet. . . . . . . . . . . . . . . . . . . . . . . . . . .
Outlet . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (WxLxH)
inches . . . .
3530-30-2
3530-30-3
3530-30-9
1.25x1.5x5
1.5x2x5
2x2.5x5
3530
3530-30-2
3530-30-3
3530-30-9
PF1CB6NA4 PF1DB6NG4 PF1ED6NC4 PF3AB6NA4
PF3CB6NA4 PF3DB6NG4 PF3ED6NC4
27 @ 25 psid 35 @ 35 psid 76 @ 25 psid 5 @ 25 psid
27 @ 25 psid 35 @ 35 psid 76 @ 25 psid
52%
53%
61%
40%
52%
53%
61%
1.0 HP
1.5 HP
2.0 HP
0.5 HP
1.0 HP
1.5 HP
2.0 HP
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
TEFC/1.15
115/230V
115/230V
230/460V
230/460V
230/460V
230/460V
230/460V
16/8A; 1ph
20/20A; 1ph
12A; 3ph
24/12A; 3ph
3.6/1.8A; 3ph 5.2/2.6A; 3ph 6.8/3.4A; 3ph
0.83
1.2
1.6
1.6
0.83
1.2
1.6
Horizontal, closed-coupled. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
304 stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11⁄4" NPTF
11⁄4" NPTF
11⁄2" NPTF
11⁄2" NPTF
11⁄4" NPTF
11⁄4" NPTF
11⁄2" NPTF
1" NPTF
1" NPTF
11⁄4" NPTF
11⁄4" NPTF
1" NPTF
1" NPTF
11⁄4" NPTF
10.5x18.5x9
10.5x18.5x9
10.5x18.5x9
10.5x18.5x9
10.5x18.5x9
10.5x18.5x9
10.5x18.5x9
41
45
45
37
41
45
45
PF3GD5NE4 PF3HE5NE4 PF3IF5FC4
135 @ 35 psid 200 @ 30 psid 290 @ 35 psid
61%
59%
68%
5.0 HP
7.5 HP
10.0 HP
TEFC/1.15
TEFC/1.15
TEFC/1.15
230/460V
230/460V
230/460V
15.2/7.6A; 3 ph 22/11A; 3 ph
28/14A; 3 ph
3.5
5.1
6.4
Horizontal, closed-coupled . . . . . . . . . . . . .
304 stainless steel . . . . . . . . . . . . . . . . . . . .
11⁄2" NPTF
2" NPTF
21⁄2" 150# flange
11⁄4" NPTF
11⁄2" NPTF
2" 150# flange
12x23x11
15x24x12
15x25x12
101
130
175
*Please contact Technical Support to obtain pump curves
Siemens
Water Technologies
BACK
162
REVERSE OSMOSIS MEMBRANES
Replacement Reverse Osmosis (RO)
Membranes
Siemens is your leading source for replacement membranes. We supply elements
from all of the major manufacturers. For your convenience, we inventory
FILMTEC™ and Hydranautics® membranes at our regional distribution facilities.
This enables us to meet short lead times and thereby minimize your system
downtime. In addition, we also stock major components such as replacement
gauges, pumps and end caps. Whether it involves normal wear-and-tear
replacement, maintenance or spares inventory, Siemens has the products to
support your membrane system.
Manufacturer
Size DxL
Ionpure
Ionpure
Ionpure
Ionpure
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Filmtec
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
Hydranautics
4 x 40
4 x 40
8 x 40
8 x 40
4 x 40
4 x 40
4 x 40
4 x 40
4 x 40
4 x 40
4 x 40
4 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
4 x 40
4 x 40
4 x 40
4 x 40
4 x 40
4 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
8 x 40
Siemens
Catalog No.
06/PL32364-01R
06/PL32364-02R
06/PL32364-04R
06/PL32364-06R
ROSTW4040
CDRCLP4040
CDRCXLE4040
CDRC4X40B
CDRCLE4X40B
CDRC4X40L
CDRCF4040L379P
CDRCSW304040
CDRC30365
CDRC8X40D
CDRC8X40LE
CDRC30365FR
CDRCBW30400/34I
CDRCBW30440I
CDRCLE440I
CDRCSW30XLE400I
CDRCSW30HRLE400I
CDRCSW30HRLE400
ROLSA4040
CDHYESPA14040
CDHYESPA24040
CDHYESPA34040
CDHYESPA44040
CDHYSWC14040
ROLSY8040
CDHYCPA3
CDHYCPA4
CDHYESPA1
CDHYESPA2
CDHYESPA3
CDHYESPA4
CDHYSWC3
CDHYSWC3PLUS
CDHYSWC4PLUS
CDHYSWC5
Manufacturer’s
Catalog No.
PWS PFC-4
PWS HS2-4
PWS PFC-8
PWS HS2-8
TW30-4040
LP-4040
XLE-4040
BW30-4040
BW30LE-4040
RO-4040-FF
HSRO-4040-FF
SW30-4040
BW30-365
BW30-400
BW30LE-440
BW30-365FR
BW30-400/34i
BW30-440i
LE-440i
SW30-400i
SW30HR-LE400i
SW30HR-LE400
CPA2-4040
ESPA1-4040
ESPA2-4040
ESPA3-4040
ESPA4-4040
SWC1-4040
CPA2
CPA3
CPA4
ESPA1
ESPA2
ESPA3
ESPA4
SWC3
SWC3+
SWC4
SWC5
Type
Approx GPD
% Reject
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
TFC
2300
2800
9000
11200
2400
3200
2600
2400
2300
2650
1900
1500
9500
10500
11500
9500
10500
11500
12650
9000
7500
7500
2250
2600
1900
3000
2500
1100
10000
11000
6000
12000
9000
15000
12000
5900
7000
6500
9000
99.6
99.6
99.6
99.6
99.5
99.2
99.0
99.5
99.2
99.5
99.5
99.2
99.5
99.5
99.2
99.5
99.5
99.5
99.3
99.7
99.8
99.8
99.2
99.0
98.0
98.0
99.2
99.6
99.2
99.6
99.7
99.0
99.5
98.0
99.2
99.6
99.8
99.8
99.8
Items in BLUE are stocked by Siemens.
For availability of other items, please contact your local Siemens sales representative.
Siemens
Water Technologies
BACK
REVERSE OSMOSIS MEMBRANES - OBSOLETE SIEMENS SYSTEMS
CARO RO Membrane Cartridges
• Spiral wound modules constructed of cellulose acetate membrane
• Designed to operate in Series 60, 120, 250, 350, M-1000/2000/3000 RO
systems, and other units
• Chlorine tolerant for sanitization
• Good salt rejection
• Competitive flux rates
• Ideal for medical, hemodialysis, pharmaceutical, biotechnology, food and
beverage and laboratory applications
PERFORMANCE AND PHYSICAL SPECIFICATIONS
Initial Flow Rate @ 25°C/200 psi
Initial Rejection Monovalent Ions
Initial Rejection Divalent Ions . .
Length/in. (cm) . . . . . . . . . . . . .
Diameter/in. (cm) . . . . . . . . . . .
Diameter (unstressed
chevron seal)/in. (cm) . . . . . . . .
Membrane Surface Area
(ft2) (m2). . . . . . . . . . . . . . . . . . . . .
Product Tube Diameter/in. (cm). .
MR40
1.0 L/min
>90%
>95%
25 (63.5)
3.5 (8.9)
MR60
> 1.3 L/min
>93%
>96%
25 (63.5)
3.84 (9.75)
3.74 (9.50)
4.21 (10.69) —
40 (3.72)
—
60 (5.57)
—
FEED WATER SPECIFICATIONS
Operating Pressure. . . 140-400 psi
<–0.5 ppm
Temperature . . . . . . . . 2-35°C
pH . . . . . . . . . . . . . . . . 4 - 7.5
Silt Density Index . . . . < 5
RO System
MR40C Cartridges
Series 60 . . . . . . . . . . . . . . . . .
Series 120 . . . . . . . . . . . . . . . .
Series 250 . . . . . . . . . . . . . . . .
Series 350 . . . . . . . . . . . . . . . .
MR60 Cartridges
Series 1000, 2000 . . . . . . . . . .
4x40/8x40 Cartridges
Series 2500, 3000 . . . . . . . . . .
Series 4000, 8400 . . . . . . . . . .
4 x 40
1360 gpd
>96%
8 x 40
7000 gpd
>96%
40 (101.6) 40 (101.6)
4 (10.2)
8 (20.3)
—
0.625 (1.59) 1.5 (3.81)
Langelier Saturation Index of Reject
Free Chlorine. . . . . . . . . . . . . . . . . <1.5 ppm
Maximum Cartridge Recovery. . . . 15%
Maximum Feed Turbidity. . . . . . . . 1 NTU
Cartridges Used
Quantity Required
CDRO 025 S1
CDRO 025 S1
CDRO 025 SH
CDRO 025 S1
CDRO 025 SH
CDRO 025 S1
CDRO 025 SH
1 each
1 each
1 each
1 each
2 each
1 each
3 each
CDRO M60 S1
Quantities vary, consult
Technical Support
CDROFG440 (1/pk)
CDROFG840 (1/pk)
Quantities vary, consult
Technical Support
Siemens
Water Technologies
BACK
163
164
VANTAGE™ MicRO
Flow Rates from 0.1 to 1.6 gpm
Vantage™ MicRO Series reverse osmosis units are designed and manufactured for
commercial applications. Each MicRO model consists of a single stage, positive
displacement, rotary vane pump, and tap water membranes. Each unit is fully tested
at the factory and only requires simple utility connections (feed water inlet, product
water outlet, drain and a power source).
Capabilities
• High pressure feed pump
• PVC end entry pressure vessels
• Spiral wound thin film composite (TFC) membranes
• Hand/Off/Auto switch for system operation
• Schedule 80 PVC product piping
• Electrical cord with male plug designed to be plugged into a standard 115VAC,
grounded receptacle
Model Number
MCRO1
MCRO2
MCRO4
MCRO8
MCRO12
MCRO16
Product Flow* (gpm)................................
Feed Flow (gpm)......................................
Reject Flow (gpm)....................................
Reject Recycle (gpm) ..............................
0.1
0.2
0.1
0.6
0.17
0.34
0.17
0.6
0.4
0.8
0.4
0.8
0.8
1.6
0.8
1.6
1.2
2.4
1.2
2.5
1.6
3.2
1.6
3.2
Feed Inlet.................................................
Product Outlet..........................................
Reject to Drain Outlet ..............................
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
3/8" FNPT
Membrane Size........................................
Membranes/Vessel ..................................
Membrane Quantity .................................
2.5” diameter
1
1
2.5” diameter
1
1
2.5” diameter
1
1
2.5” diameter
1
2
2.5” diameter
1
3
2.5” diameter
1
4
Vessel Staging .........................................
1
1
1
1:1
1:1:1
1:1:1:1
H x W x D . . . . . . . . . . . . .inches
Shipping Weight
. . . . . . . . . . . . . . . . . . . . . . . . . .lb
48x28x10
48x28x10
48x28x10
48x28x10
48x28x10
48x28x10
47
50
53
57
61
65
High Voltage Service ...............................
High Voltage FLA.....................................
120V 1PH
6.5
120V 1PH
6.5
120V 1PH
6.5
120V 1PH
6.5
120V 1PH
6.5
120V 1PH
6.5
Connections
Membranes
Vessels
System Dimensions**
**Does not include operating space requirements.
OPTIONAL ACCESSORIES
Catalog No.
MCRIP04
MCRIP16
MCRTL
MCRSP
Description
Prefilter gauge, feed water low-pressure switch, product flow meter, reject recycle flow meter for: MCRO1, MCRO2, MCRO4
Prefilter gauge, feed water low-pressure switch, product flow meter, reject recycle flow meter for: MCRO8, MCRO12, MCRO16
Tank level switch for all models
Free standing mounting frame for all models
Siemens
Water Technologies
BACK
165
VANTAGE™ M21 Series RO
Flow Rates from 0.4 to 1.6 gpm
Vantage™ Reverse Osmosis units are pre-engineered systems specifically designed for a
variety of industrial applications. Vantage™ systems offer you the greatest flexibility
possible from a standard system. The control system is an advanced microprocessorbased system that is very easy to use.
Capabilities
• TFC (thin film composite) RO membranes ensure optimum water quality
• Microprocessor-based controller provides user-friendly programmable controls
• Small footprint minimizes required space
• Low energy membranes reduce operating costs
• Clean-in-place connections maximize system availability
• Dial-up capability enables real-time remote monitoring (optional)
Model Number
Product Flow* (gpm) . . . . . . . . . .
Feed Flow (gpm) . . . . . . . . . . . . .
Reject Flow (gpm) . . . . . . . . . . . .
Reject Recycle (gpm) . . . . . . . . .
Connections
Feed Inlet . . . . . . . . . . . . . . . . . . .
Product Outlet . . . . . . . . . . . . . . .
Reject to Drain Outlet . . . . . . . . .
Membranes
Membrane Quantity . . . . . . . . . . .
Membrane Size . . . . . . . .(inches)
Vessels
Vessel Array . . . . . . . . . . . . . . . . .
System Dimensions**
HxWxD
inches . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
lb . . . . . . . . . . . . . . . . . . . . . . .
kg . . . . . . . . . . . . . . . . . . . . . .
M21R001
M21R002
M21R003
M21R004
0.4
0.8
0.4
3.1
0.8
1.6
0.8
2.3
1.2
2.4
1.2
1.5
1.6
3.2
1.6
0.7
1
2.5x40
2
2.5x40
3
2.5x40
4
2.5x40
62x17x26
157x43x66
62x17x26
157x43x66
3/4” NPT
1/2” tube
3/8” tube
1
62x17x26
157x43x66
80
36
3/4” NPT
1/2” tube
3/8” tube
1:1
62x17x26
157x43x66
90
41
3/4” NPT
1/2” tube
3/8” tube
1:1:1
100
45
3/4” NPT
1/2” tube
3/8” tube
1:1:1:1
110
50
*Product flow rates are based on equipment design parameters and may not be appropriate for other feed waters.
Catalog Number:
M21R . . . . . . . . . . . . . . .
M21R
Vantage M21 Series RO
004
E
001 - 1 Membrane
002 - 2 Membranes
003 - 3 Membranes
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 004 - 4 Membranes
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - Economy
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D
A - 120/240 VAC, 1 PH, 60 HZ
B - 208 VAC, 3 PH, 60 HZ
C - 230 VAC, 3 PH, 60 HZ
D - 460 VAC, 3 PH, 60 HZ
E - 575 VAC, 3 PH, 60 HZ
F - 380 VAC, 3 PH, 50 HZ
Siemens
Water Technologies
BACK
166
VANTAGE™ M41 High Purity (HP) Series RO
Flow Rates from 1.4 to 15 gpm
The Vantage™ M41RHP (High Purity) series RO units are designed and manufactured for
industrial applications. Units contain 4-inch membranes with flow rates of 1.4 to 15.0 gallons
3
per minute (0.32 to 3.4 m /hr). They arrive with membranes installed and only require simple
utility connections to begin operations. Their simple designs maximize reliability of the RO unit.
Capabilities
• TFC membranes (choice of full-fit or brackish water) ensure optimum water quality
• Clean-in-place connections maximize system availability and serviceability
• Optional modem is available to enable real-time remote monitoring
• Stainless steel high pressure piping and fittings
• Reject recycle maximizes water recovery and minimizes waste
Model Number*
M41RHP001
Product Flow** (gpm)
Feed Flow (gpm)
Reject Flow (gpm)
Reject Recycle (gpm)
1.4
2.8
1.4
7.0
Connections
Feed Inlet
Product Outlet
Reject to Drain Outlet
M41RHP002
M41RHP003
6.2
8.3
2.1
6.0
7.0
9.3
2.3
6.0
4 x 40
2
4 x 40
3
4 x 40
4
4 x 40
5
4 x 40
6
1:1:1:1
1:1:1:1:1
2:1:1:1:1
Vessel Staging
1
1:1
1:1:1
Model Number*
M41RHP008
M41RHP009
M41RHP012
4 x 40
1
Vessels
System Dimensions***
Shipping Weight . . . . . . . . . . . . . . . . . . . lb
Product Flow** (gpm)
Feed Flow (gpm)
Reject Flow (gpm)
Reject Recycle (gpm)
Connections
Feed Inlet
Product Outlet
Reject to Drain Outlet
Membrane Size
Membrane Quantity
Vessels
System Dimensions***
Shipping Weight . . . . . . . . . . . . . . . . . . . lb
575
1-1/2" Flange
3/4" NPT
3/4" NPT
600
10.0
13.3
3.3
8.0
12.0
16.0
4.0
11.0
15.0
20.0
5.0
10.0
4 x 40
8
4 x 40
9
4 x 40
12
3:2:2:1:1
3:3:2:2:1:1
1-1/2" Flange
3/4" NPT
3/4" NPT
Membranes
Vessel Staging
550
2:2:1:1:1:1
750
M41RHP006
5.2
6.9
1.7
6.0
1-1/2" Flange
3/4" NPT
3/4" NPT
Membrae Size
Membrane Quantity
M41RHP005
4.0
8.0
4.0
4.0
1-1/2" Flange
3/4" NPT
3/4" NPT
Membranes
M41RHP004
2.8
5.6
2.8
5.0
1-1/2" Flange
3/4" NPT
3/4" NPT
775
1-1/2" Flange
3/4" NPT
3/4" NPT
625
1-1/2" Flange
3/4" NPT
3/4" NPT
650
1-1/2" Flange
3/4" NPT
3/4" NPT
675
1-1/2" Flange
3/4" NPT
3/4" NPT
850
*The 4 designates 4" housing, the 1 designates element in length, and the 0X designates the number of membranes.
**Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.
***Does not include operating space requirements.
Siemens
Water Technologies
BACK
167
VANTAGE™ M41 High Purity (HP) Series RO
Catalog Number:
M41RHP . . . . . . . . . . . . .
M41RHP
Vantage M41 High Purity RO
012
E
001 - 1 Membrane
002 - 2 Membranes
003 - 3 Membranes
004 - 4 Membranes
005 - 5 Membranes
006 - 6 Membranes
008 - 8 Membranes
009 - 9 Membranes
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 012 - 12 Membranes
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - Economy
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S
D
S - BW30-4040
F - RO-4040-FF
B - 208 VAC, 3 ph, 60 Hz
C - 230 VAC, 3 ph, 60 Hz
D - 460 VAC, 3 ph, 60 Hz
E - 575 VAC, 3 ph, 60 Hz
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F - 380 VAC, 3 ph, 50 Hz
Siemens
Water Technologies
BACK
168
VANTAGE™ M41 General Purpose (GP)
Series RO
Vantage™ Reverse Osmosis units are pre-engineered systems specifically designed for
a variety of industrial applications. Vantage™ systems offer the greatest flexibility
Capabilities
• TFC (thin film composite) RO membranes ensure optimum water quality
• Low energy membranes reduce operating costs
• Reject recycle maximizes water recovery and minimizes waste
• Dial-up capability enables real-time remote monitoring (optional)
Model Number
with centrifugal pump . . . .
Product Flow* (gpm) . . . . . .
Feed Flow (gpm) . . . . . . . . .
Reject Flow (gpm) . . . . . . . .
Reject Recycle (gpm) . . . . .
Connections
Feed Inlet. . . . . . . . . . . . . . .
Product Outlet . . . . . . . . . . .
Reject to Drain Outlet . . . . .
Membranes
Membrane Quantity . . . . . . .
Membrane Size. . . . (inches)
Vessels
Vessel Array. . . . . . . . . . . . .
System Dimensions**
HxWxD
. . . . . . . . . . . . . . . . . inches
. . . . . . . . . . . . . . . . . . . . cm
Shipping Weight
. . . . . . . . . . . . . . . . . . . . . lb
. . . . . . . . . . . . . . . . . . . . . kg
M41RGP001
1.4
2.8
1.4
6.8
M41RGP002
2.8
5.6
2.8
4.0
M41RGP003
4.0
8.0
4.0
9.3
M41RGP004
5.2
8.0
2.8
9.0
M41RGP005
6.3
8.3
2.0
9.0
M41RGP006
7.5
10.0
2.5
7.3
M41RGP008
10
13.3
3.3
4.0
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1-1/2”NPT
3⁄4” NPT
3⁄4” NPT
1
4x40
2
4x40
3
4x40
4
4x40
5
4x40
6
4x40
8
4x40
1
1:1
1:1:1
1:1:1:1
1:1:1:1:1
2:1:1:1:1
2:2:1:1:1:1
72x38x34
183x97x86
72x38x34
183x97x86
72x38x34
183x97x86
72x38x34
183x97x86
72x38x34
183x97x86
72x38x34
183x97x86
72x38x34
183x97x86
550
250
575
261
600
273
625
284
700
318
725
330
750
341
*Product flow rates are based on equipment design parameters and may not be appropriate for other feed waters.
Catalog Number:
M41RGP . . . . . . . . . . . . .
M41RGP
Vantage M41 General Purpose RO
008
001 - 1 Membrane
E
S
D
002 - 2 Membranes
003 - 3 Membranes
004 - 4 Membranes
005 - 5 Membranes
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
006 - 6 Membranes
008 - 8 Membranes
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B -208 VAC, 3 ph, 60 Hz
E - Economy
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C -230 VAC, 3 ph, 60 Hz
S - XLE-4040
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siemens
Water Technologies
D -460 VAC, 3 ph, 60 Hz
E - 575 VAC, 3 ph, 60 Hz
F - 380 VAC, 3 ph, 50 Hz
BACK
169
VANTAGE™ M43 Series RO
Vantage™ Reverse Osmosis units are pre-engineered systems specifically designed for
a variety of industrial applications. Vantage™ systems offer you the greatest flexibility
Capabilities
• TFC (thin film composites) RO membranes ensure optimum water quality
• Pre-engineered systems allow easy installation
• Auxiliary equipment interface provides system-wide control
Model Number
M43R009
M43R012
M43R015
M43R018
Feed Flow (gpm) . . . . . . . . . . . . . . . . . . . .
Reject Flow (gpm) . . . . . . . . . . . . . . . . . . .
16.2
5.7
21.4
6.4
25.3
6.3
30.7
7.7
Feed Inlet . . . . . . . . . . . . . . . . . . . . . . . . . .
2”
2”
2”
2”
Product Flow* (gpm) . . . . . . . . . . . . . . . . .
Connections
Product Outlet . . . . . . . . . . . . . . . . . . . . . .
Reject to Drain Outlet . . . . . . . . . . . . . . . .
Membranes
Membrane Quantity . . . . . . . . . . . . . . . . . .
10.5
15
19
23
1-1/2”
1-1/2”
1-1/2”
1-1/2”
9
12
15
18
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
Membrane Size . . . . . . . . . . . . . . .(inches)
4x40
4x40
4x40
4x40
Vessel Array . . . . . . . . . . . . . . . . . . . . . . . .
1:1:1
2:1:1
2:2:1
3:2:1
Pump Type . . . . . . . . . . . . . . . . . . . . . . . . .
Vertical Multi-stage
HxWxD
inches . . . . . . . . . . . . . . . . . . . . . . . . . .
63x23x129
63x23x129
63x23x129
63x23x129
Vessels
Pump
System Dimensions**
cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
lb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
160x58x328
160x58x328
1110
160x58x328
1250
505
1400
568
160x58x328
1550
636
705
Catalog Number:
M43R . . . . . . . . . . . . . . . .
M43R
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
018
009 - 9 Membrane
E
S
012 - 12 Membranes
015 - 15 Membranes
018 - 18 Membranes
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B - 208 VAC, 3 ph, 60 Hz
E - Economy
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C - 230 VAC, 3 ph, 60 Hz
S - BW30LE-4040
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BACK
D
D - 460 VAC, 3 ph, 60 Hz
E - 575 VAC, 3 ph, 60 Hz
F - 380 VAC, 3 ph, 50 Hz
Siemens
Water Technologies
170
Vantage™ M83 Series RO
Vantage™ M83 Series packaged single-pass 8-inch reverse osmosis units are
designed for industrial applications requiring high quality equipment with a fast
delivery and a competitive price.
Standard Features:
• RO Prefilter
• ASME Code Vessels with Pressure Relief
• Three models: Economy, Plus, and Deluxe:
• Economy utilizes rotameters and a microprocessor
• Plus provides more flexibility via control with a Siemens PLC and a user
friendly touch screen HMI.
• Deluxe provides Siemens PLC/HMI, Variable Frequency Drive and
controlled feed pump, “On-Board” integrated cleaning system, loose ship
chemical tank and hoses, pH/ORP measurement.
Benefits:
• Four (4) week standard lead time keeps your project moving.
• Compact footprint saves valuable floor space.
• Dry contacts are provided for chemical feed, pretreatment equipment, storage
tank levels, and pressure switches.
• With simple utility connections and easy to set up controls, the unit is ready for
quick on-line service.
GENERAL SYSTEM SPECIFICATIONS
General Electrical:
General Control Specs:
UL, cUL Enclosures NEMA 12 or better
Economy – Controlled by Microprocessor
Plus – Controlled by Siemens PLC and user friendly touch
screen Human Machine Interface (HMI)
Deluxe (M83D) – M83P controls plus Variable Frequency
Drive (VFD), pH/ORP monitor
Overall Dimensions*:
168” Length, 32” Wide, 77” Height (100 gpm Unit 89” Height)
Key Materials of Construction:
Painted carbon steel frame, PVC low pressure piping,
stainless steel high pressure piping
Membrane Type:
Thin Film Composite brackish water and low energy
membranes (optional)
Available Options:
Seismic Zone 4 Anchorage Wet Stamp (CA); pH, ORP, or both
on Economy and Plus Models
Siemens
Water Technologies
BACK
171
Model Number**
M83R006
M83R009
M83R012
M83R015
M83R018
Feed Inlet.................................................
Product Outlet..........................................
2"
1.5"
1.5"
2"
1.5"
1.5"
2"
2"
1.5"
3"
2"
1.5"
3"
3"
1.5"
3
6
3
9
3
12
3
15
3
18
Vessel Staging .........................................
1:1
1:1:1
2:1:1
2:2:1
3:2:1
Shipping Weight . . . . . . . . . . . .lb
2,900
3,175
3,450
3,725
4,000
Product Flow* (gpm)................................
Feed Flow (gpm)......................................
Reject Flow (gpm)....................................
Reject Recycle (gpm) ..............................
Connections
Membranes
Vessels
System Dimensions
30
40
10
10
45
60
15
5
60
80
20
5
75
100
25
3
100
133
33
3
**The 8 designates 8" housing, the 3 designates 3 elements in length, and the XXX designates the nominal design product flow rate at 65˚ (18.3˚C).
Catalog Number:
M83R . . . . . . . . . . . . . . . .
M83R
018
006 - 6 Membranes
E
S
Y
D
009 - 9 Membranes
012 - 12 Membranes
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
015 - 15 Membranes E - Economy
018 - 18 Membranes P - Plus
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D - Deluxe
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S - Standard (ILEC) Element
C - Cold Water (LE) Element
Product Divert Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Y - Divert Kit Included
X - Divert Kit Not Included
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D - 460 VAC, 3 ph, 60 Hz
E - 575 VAC, 3 ph, 60 Hz
Siemens
Water Technologies
BACK
172
Vantage™ M84 Series packaged single-pass 8-inch reverse osmosis units are
designed for industrial applications requiring high quality equipment with a
fast delivery and a competitive price.
Standard Features:
• RO Prefilter
• Product Divert Kit with ASME Code Pressure Relief Valve (Loose Shipped)
• Plus provides more flexibility via control with a Siemens PLC and a
user friendly touch screen HMI.
controlled feed pump, “On-Board” integrated cleaning system, loose
ship chemical tank and hoses, pH/ORP measurement.
Benefits:
• Dry contacts are provided for chemical feed, pretreatment equipment,
storage tank levels, and pressure switches.
• With simple utility connections and easy to set up controls, the unit is
ready for quick on-line service.
General Electrical:
Membrane Type:
Available Options:
screen Human Machine Interface (HMI), Ethernet
Deluxe –Plus controls with Variable Frequency
Drive (VFD), pH and ORP monitors, Ethernet
230” Length, 54” Wide, 90” Height (maximum dimensions)
Thin Film Composite brackish water and low energy
membranes (optional)
Siemens
Water Technologies
BACK
173
Model Number**
M84R024
M84R036
M84R048
Feed Inlet.................................................
Product Outlet..........................................
3"
3"
2"
4"
3"
2"
4"
4"
2"
Membrane Size........................................
8 x 40
4
24
8 x 40
4
36
8 x 40
4
48
Vessel Staging .........................................
3:2:1
4:3:2
6:4:2
4,550
5,400
6,000
Product Flow* (gpm)................................
Feed Flow (gpm)......................................
Reject Flow (gpm)....................................
Connections
Membranes
Vessels
System Dimensions
107
143
36
160
215
53
214
285
71
**The 8 designates 8" housing, the 4 designates 4 elements in length, and the XXX designates the nominal design product flow rate at 65˚F (18.3˚C).
Catalog Number:
M84R . . . . . . . . . . . . . . . .
M84R
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
048
E
036 - 36 Membranes
E - Economy
024 - 24 Membranes
048 - 48 Membranes
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P - Plus
D - Deluxe
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S
D
S - Standard (ILEC) Element
C - Cold Water (LE) Element
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D - 460 VAC, 3 ph, 60 Hz
E - 575 VAC, 3 ph, 60 Hz
Siemens
Water Technologies
BACK
174
NANOFILTRATION SYSTEMS
Vantage™ M84 Series Nanofiltration
Vantage™ M84 Series packaged single-pass 8-inch nanofiltration units are
designed for industrial and municipal applications requiring high quality
equipment with a fast delivery and a competitive price.
Standard Features:
• Prefilter
• Plus provides more flexibility via control with a Siemens PLC and a user
friendly touch screen HMI.
controlled feed pump, “On-Board” integrated cleaning system, loose
ship chemical tank and hoses, pH/ORP measurement.
Benefits:
• Dry contacts are provided for chemical feed, pretreatment equipment,
storage tank levels, and pressure switches.
• With simple utility connections and easy to set up controls, the unit is ready
for quick on-line service.
General Electrical:
Membrane Type:
Available Options:
screen Human Machine Interface (HMI), Ethernet
Deluxe plus controls plus Variable Frequency
Drive (VFD), pH and ORP monitors, Ethernet
230” Length, 54” Wide, 90” Height (maximum dimensions)
Thin Film Composite nanofiltration membranes
Siemens
Water Technologies
BACK
175
NANOFILTRATION SYSTEMS
Vantage™ M84 Series Nanofiltration
Model Number**
M84N024
M84N036
M84N048
Feed Inlet.................................................
Product Outlet..........................................
3"
3"
2"
4"
3"
2"
4"
4"
2"
Membrane Size........................................
8 x 40
4
24
8 x 40
4
36
8 x 40
4
48
Vessel Staging .........................................
3:2:1
4:3:2
6:4:2
4,300
5,150
5,650
Product Flow* (gpm)................................
Feed Flow (gpm)......................................
Reject Flow (gpm)....................................
Connections
Membranes
Vessels
System Dimensions
100
133
33
150
200
50
200
267
67
**The 8 designates 8" housing, the 4 designates 4 elements in length, and the XXX designates the nominal design product flow rate at 65˚F (18.3˚C).
Catalog Number:
M84N . . . . . . . . . . . . . . . .
M84N
Vantage M84 Series Nanofilter
Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
048
E
036 - 36 Membranes
E - Economy
024 - 24 Membranes
048 - 48 Membranes
S
D
S - Standard (NF) Element
D - 460 VAC, 3 ph, 60 Hz
P - Plus
Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D - Deluxe
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E - 575 VAC, 3 ph, 60 Hz
Siemens
Water Technologies
BACK
176
Pharm40 Series RO Systems
Pharm40 Series Reverse Osmosis (RO) Systems were designed for pharmaceutical,
biotech and cosmetic applications. These systems can remove from 97 to 99% of salts1.
Units are pre-assembled, pre-wired and hydrostatically tested at the factory. Control
systems are comprised of a control panel and skid-mounted wiring.
• System is mounted on a polyurethane coated structural steel frame
• Product piping is sanitary stainless steel or sanitary polypropylene
• Pump discharge piping is constructed of Schedule 10 butt welded 316L stainless steel
• Product samples valves are located on the outlet of each vessel for quick and easy
control
• Easy, continuous control through PLC
• Inputs and outputs are installed to communicate with pretreatment/post-treatment
equipment
• Capable of full cleaning and chemical sanitizing for advanced microbial control
• Comprehensive controls and documentation facilitate easy, thorough validation
requirements
1
Based on the RO performance projection.
SYSTEM SPECIFICATIONS*
Model Number Polypropylene*** 67/P43PP-06S/D*
67/P43PP-09S*
67/P43PP-12S*
67/P44PP-16S*
67/P44PP-20S*
67/P44PP-24S*
Model Number Stainless Steel*** 67/P43SS-06S*
67/P43SS-09S*
67/P43SS-12S*
67/P44SS-16S*
67/P44SS-20S*
System Dimensions
HxWxD
inches . . . . . . . . . . . . . . . . . . .
cm. . . . . . . . . . . . . . . . . . . . . .
Shipping Weight lb (kg) . . . . . . . .
72x30x140
103x76x356
1,300 (590)
72x30x140
103x76x356
1,400 (636)
72x30x140
103x76x356
1,500 (681)
72x30x182
103x76x462
1,600 (726)
72x30x182
103x76x462
1,700 (772)
72x30x182
103x76x462
1,800 (817)
480 VAC
120 VAC
480 VAC
120 VAC
480 VAC
120 VAC
480 VAC
120 VAC
480 VAC
120 VAC
480 VAC
120 VAC
4x40
6
4x40
9
4x40
12
4x40
16
4x40
20
4x40
24
Initial Production Capacity . . . . . .
Maximum Recovery . . . . . . . . . . .
Vessel Array. . . . . . . . . . . . . . . . .
Motor Service. . . . . . . . . . . . . . . .
Controls Service. . . . . . . . . . . . . .
Membranes**
Size . . . . . . . . . . . . . . . . . (inches)
Quantity . . . . . . . . . . . . . . . . . . . .
6 gpm
75%
1:1
9 gpm
75%
1:1:1
*S - Denotes RO system equipped with Fixed I/O PLC.
*D - Denotes RO system equipped with Expandable I/O PLC.
12 gpm
75%
2:1:1
16 gpm
75%
2:1:1
20 gpm
75%
2:2:1
67/P44SS-24S*
24 gpm
75%
3:2:1
*Capacities are based on a feed water stream of well or softened water. RO projections should be run to calculate actual system performance.
**RO membranes are included with each system.
***Sanitary product piping.
Pharm40 Series RO Systems have extensive option packages. For additional product or ordering
information, please contact Technical Support at 800.875.7873 ext. 5000.
Siemens
Water Technologies
BACK
177
40 Series Reverse Osmosis Systems
40 Series Reverse Osmosis (RO) Systems produce from 1.8 to 32.0 gpm of high-purity
water. These systems can remove up to 98% of dissolved inorganics, over 95% of total
dissolved organics and all colloidal and suspended matter larger than 0.05 micron. The
flexible design accommodates virtually all TFC (thin film composite) 4” spiral wound RO
membranes to suit your application.
• Pre-filtration cartridges are included to protect membranes
• Stainless steel pumps and piping resist corrosion
• Sample valves on the feed provide an easy way to test water quality and guarantee
system performance
• UL Listed enclosure ensures quality and reliability
• Conductivity meter and PLC controller are included
Series
41 Series RO Systems
Initial Production Capacity . . . . . . . . .
Vessel Array . . . . . . . . . . . . . . . . . . . .
41-220
41-230
41-240
41-250
1.8 gpm
1:1
2.7 gpm
1:1:1
3.6 gpm
1:1:1:1
4x40
2
4x40
3
36x30x72
914x762x1829
500 (227)
36x30x72
914x762x1829
550 (249)
Model Number
Membranes†
Size . . . . . . . . . . . . . . . . . . . . (inches)
Quantity . . . . . . . . . . . . . . . . . . . . . . .
System Dimensions
HxWxD . . . . . . . . . . . . . . . . . . inches
. . . . . . . . . . . . . . . . . . . . . . . . . . . . cm
Shipping Weight lb. (kg) . . . . . . . . . . .
42-230
42-240
43-230
43-240
4.5 gpm
1:1:1:1:1
5.4 gpm
1:1:1
7.3 gpm
1:1:1:1
8 gpm
1:1:1
11 gpm
2:1:1
4x40
4
4x40
5
4x40
6
4x40
8
4x40
9
4x40
12
36x30x72
914x762x1829
600 (272)
36x30x72
914x762x1829
650 (295)
36x30x96
914x762x2438
1300 (590)
36x30x96
914x762x2438
1400 (635)
138x30x82
138x30x82
3505x762x2083 3505x762x2083
1500 (681)
1600 (726)
High Voltage Service . . . . . . . . . . . . .
480 VAC 3ph – 60 Hz
Series (continued)
Initial Production Capacity . . . . . . . . .
Vessel Array . . . . . . . . . . . . . . . . . . . .
43-250
43-260
44-240
44-250
44-260
44-270
44-280
44-290
13 gpm
2:2:1
16 gpm
3:2:1
14 gpm
2:1:1
18 gpm
2:2:1
22 gpm
3:2:1
25 gpm
3:2:2
29 gpm
4:2:2
32 gpm
4:3:2
4" x 40"
15
4" x 40"
18
4" x 40"
16
4" x 40"
20
4" x 40"
24
4" x 40"
28
4" x 40"
32
4" x 40"
36
138x30x82
3505x762x2083
1700 (772)
138x30x82
3505x762x2083
1800 (817)
178x30x82
4521x762x2083
1900 (863)
178x30x82
4521x762x2083
2000 (908)
178x30x82
4521x762x2083
2100 (953)
178x30x82
4521x762x2083
2200 (999)
178x30x82
4521x762x2083
2300 (1044)
178x30x82
4521x762x2083
2400 (1090)
Model Number
Membranes†
Size. . . . . . . . . . . . . . . . . . . . . . . . . . .
Quantity . . . . . . . . . . . . . . . . . . . . . . .
System Dimensions
HxWxD . . . . . . . . . . . . . . . . . . inches
. . . . . . . . . . . . . . . . . . . . . . . . . . . . cm
Shipping Weight lb. (kg) . . . . . . . . . . .
High Voltage Service . . . . . . . . . . . . .
480 VAC 3ph – 60 Hz
†Replacement
RO membrane information is available. See catalog index.
Catalog Number:
67/
System Name . . . . . . . . . . 67/
.....................
.....................
Series Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
...........................
...........................
XX
41 = 1M Vessel
42 = 2M Vessel
43 = 3M Vessel
44 = 4M Vessel
–
XXX
220 = 2 Vessels
230 = 3 Vessels
240 = 4 Vessels
250 = 5 Vessels
260 = 6 Vessels
270 = 7 Vessels
–
XX
...........................
280 = 8 Vessels
XM = No Membranes
Vessel Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 = 9 Vessels
BL = Membranes shipped loose
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BN = Membranes installed
BACK
Siemens
Water Technologies
178
Vantage™ M240 Series Two Pass
Vantage™ M240 Series Reverse Osmosis (RO) Systems can remove up to 98% of
dissolved inorganics, over 95% of total dissolved organics and all colloidal and suspended
matter larger than 0.05 micron. The flexible design can accommodate virtually all TFC
(thin film composite) 4" spiral wound RO membranes to suit your application.
• Sample valves on the feed provide an easy mechanism to test water quality and
guarantee system performance
Series
M243 Series RO Systems
Initial Production Capacity1 . . . . . . . . .
Vessel Array . . . . . . . . . . . . . . . . . . . . .
M243-250
M243-260
M244 Series RO Systems
M244-260
M244-280
M244-300
5 gpm
1:1:1/1:1
7.5 gpm
2:1:1/1:1
10 gpm
2:1:1/1:1
15 gpm
2:2:1/2:1
20 gpm
3:2:1/2:1:1
4x40
9/6
4x40
12/6
4x40
16/8
4x40
20/12
4x40
24/16
Model Number
Membranes†
Size . . . . . . . . . . . . . . . . . . . . . (inches)
Quantity (1st pass/2nd pass) . . . . . . . .
System Dimensions
HxWxD
inches. . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight lb. (kg). . . . . . . . . . . .
High Volume Service . . . . . . . . . . . . .
†Replacement
148x40x82
148x40x82
3579x1016x2083 3579x1016x2083
1800 (817)
1900 (863)
178x40x82
178x40x82
178x40x82
4521x1016x2083 4521x1016x2083 4521x1016x2083
2200 (999)
2400 (1090)
2600 (1180)
480 VAC 3ph – 60 Hz
*Capacities are based on a feed water stream of well or softened water. RO projections should be run to calculate actual system
performance.
1Inlet water 20 – 75 psig operating at 75 and 90% recovery.
Catalog Number:
67/
XXX
–
XXX
–
System Name . . . . . . . . . . . . . 67/
243 = Two Pass, 4", 3 Membranes/Vessel
250 = 5 Vessels
Equipment Product Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 = Two Pass, 4", 4 Membranes/Vessel
260 = 6 Vessels
..........................
280 = 8 Vessels
Vessel Designation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 300 = 10 Vessels
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTION ORDERING INFORMATION
Catalog Number:
XX
XM = No Membranes
BL = BW30-4040 shipped loose
X
pH Monitor = 24/S1001-161
Alarm Beacon = 24/S1001-162
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High Product Pressure Switch = 24/S1001-163
Siemens
Water Technologies
BACK
179
Vantage™ M280 Series Two Pass
Vantage™ M280 Series Reverse Osmosis (RO) Systems can remove up to 98% of
dissolved inorganics, over 95% of total dissolved organics and all colloidal and
suspended matter larger than 0.05 micron. Their flexible design can accommodate
virtually all TFC (thin film composite) 8" spiral wound RO membranes to suit
your application.
• For manufacturing, beverage, microelectronics and boiler feed applications
• Side-port membrane housing reduces maintenance costs
• Sample valves on the feed provide an easy mechanism to test water quality and
guarantee system performance
Series
M283 Series
Initial Production Capacity
Vessel Array
M283-250
M284-230
25 gpm
1:1:1/1:1
Model Number
Membranes†
Size
Quantity (1st pass/2nd pass)
System Dimensions
HxWxD
inches
cm
Shipping Weight lb. (kg)
High Volume Service . . . . . . . .
M284 Series
M284-260
M284-280
M284-290
M286-280
25 gpm
1:1/1
50 gpm
2:1:1/1:1
60 gpm
2:2:1/1:1:1
75 gpm
3:2:1/2:1
8" x 40"
9/6
8" x 40"
8/4
8" x 40"
16/8
8" x 40"
20/12
8" x 40"
24/12
166x41x78
4216x1041x1981
3000 (1361)
201x41x78
201x41x78
5105x1041x1981 5105x1041x1981
3200 (1453)
3600 (1634)
M286 Series
M286-310
M286-320
100 gpm
3:2/2:1
125 gpm
5:2/3:1
150 gpm
5:3/3:1
8" x 40"
30/18
8" x 40"
42/24
8" x 40"
48/24
196x56x90
196x56x90
277x56x91
277x56x91
4978x1422x2286 4978x1422x2286 7036x1422x2311 7036x1422x2311
4000 (1814)
4200 (1907)
7000 (3175)
8500 (3856)
277x56x91
7036x1422x2311
9000 (4082)
480 VAC 3ph – 60 Hz
†Replacement
Catalog Number:
System Number . . . . . . . .
67/
XX
67/
XXX
283 = Two Pass, 8", 3 Membranes/Vessel 230 = 3 Vessels
280 = 8 Vessels
290 = 9 Vessels
Equipment Series . . . . . . . . . . . . . . . . . . . . . . .
300 = 10 Vessels
260 = 6 Vessels
310 = 11 Vessels
Vessel Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
270 = 7 Vessels
320 = 12 Vessels
Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XX
XM = No Membranes
BL = Membranes shipped loose
OPTION ORDERING INFORMATION
Catalog Number:
X
pH Monitor = 24/S2001-160
.......................
Product Water Flush = 24/S2001-161
.......................
Alarm Beacon = 24/S2001-162
.......................
High Pump Discharge Pressure Switch = 24/S2001-163
..........................
High Product Pressure Switch = 24/S2001-164
Options . . . . . . . . . . . . . . . . . . . . . . Interstage Caustic Injection Pump (Shipped Loose) (call tech support)
BACK
Siemens
Water Technologies
BevMAX™ Systems
For Beverage Applications Requiring 50 to 360 gpm
A custom solution with standard products: BevMAX™ standard, pre-packaged
reverse osmosis systems are designed for beverage, drinking water, or other
applications requiring all sanitary stainless steel piping. With ten configurations
available, we can create the system that meets your needs.
BevMAX Systems come with the following items as standard:
• 8" pressure vessels
• Choice of thin film composite (TFC), with three membrane choices — standard
brackish water , low-pressure, or nanofiltration
• Stainless steel multi-stage booster pump
• Programmable logic controller (PLC)
• Butt-welded 316L stainless steel piping
• Conductivity and flow monitors
• Vortex shedding flow meters
Although BevMAX Systems come with standard membrane, piping, pump and
controller choices, you can pick and choose from a wide variety of options to
configure a system that meets your specific needs. Contact your Sales Representative
or our Technical Support Group for more information.
l
l
l
l
l
l
l
l
l
l
l
l
Controls Type
Fixed I/O PLC
Nanofiltration
(Low Pressure)
Membrane Type
Brackish Water TFC
Submersible MS
Horiz. Multi-Stage
Pump Type
Vert. Multi-Stage
Sanitary 316L SST
75-300
90-360
50-250
Sanitary PPL
BM Series
BL Series
BN Series
316L SST
BevMAX . . . . . . . . . .
Flow Rate Range (gpm)
(at default flux rate)
Product Piping
PVC
Unit Series
Feed
Piping
316L SST
BevMAX™ PRE-PACKAGED UNITS AT-A-GLANCE
PVC
180
l
l
l
Siemens
Water Technologies
BACK
181
BevMAX™ Systems
For Beverage Applications Requiring 50 to 360 gpm
Model Number
BL3-18
BL4-28
BL4-40
BL6-54
BL6-72
BM3-18
BM4-28
BM4-40
BM6-54
BM6-72
Membranes
Membranes/Vessel . . . . . . . . . .
Membrane Quantity . . . . . . . . .
3
18
4
28
4
40
6
54
6
72
3
18
4
28
4
40
6
54
6
72
3:2:1
6
4:2:1
7
5:3:2
10
6:3
9
8:4
12
3:2:1
6
4:2:1
7
5:3:2
10
6:3
9
8:4
12
Product Flow** . . . . . . . . . . . . .
Feed Flow. . . . . . . . . . . . . . . . .
Reject Flow. . . . . . . . . . . . . . . .
Reject Recycle Flow . . . . . . . . .
Nominal Recovery . . . . . . . . . .
Vessels
Vessel Array . . . . . . . . . . . . . . .
Vessel Quantity. . . . . . . . . . . . .
System Dimensions
HxWxD
inches . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
lb . . . . . . . . . . . . . . . . . . . . . .
kg. . . . . . . . . . . . . . . . . . . . . .
90 gpm
120 gpm
30 gpm
5 gpm
75%
140 gpm
187 gpm
47 gpm
—
75%
200 gpm
267 gpm
67 gpm
—
75%
270 gpm
360 gpm
90 gpm
—
75%
360 gpm
480 gpm
125 gpm
—
75%
75 gpm
100 gpm
25 gpm
5 gpm
75%
115 gpm
153 gpm
38 gpm
—
75%
165 gpm
220 gpm
55 gpm
—
75%
225 gpm
300 gpm
75 gpm
—
75%
300 gpm
400 gpm
100 gpm
—
75%
85x44x150
81x55x190
81x55x190
90x60x275
90x60x275
85x44x150
81x55x190
81x55x190
90x60x275
90x60x275
216x112x381 206x140x483 206x140x483 229x152x699 229x152x699 216x112x381 206x140x483 206x140x483 229x152x699 229x152x699
Controls Service . . . . . . . . . . . .
Motor Service . . . . . . . . . . . . . .
Motor HP . . . . . . . . . . . . . . . . .
Amp Draw. . . . . . . . . . . . . . . . .
2900
1315
3800
1724
4400
1996
7500
3402
9000
4082
2900
1315
3800
1724
4400
1996
7500
3402
9000
4082
120V
480V
30
40
120V
480V
40
52
120V
480V
60
77
120V
480V
75
96
120V
480V
100
124
120V
480V
40
52
120V
480V
60
77
120V
480V
75
96
120V
480V
100
124
120V
480V
125
156
Model Number
BN3-12
BN4-24
BN4-40
BN6-48
BN6-60
Product Flow** . . . . . . . . . . . . .
Feed Flow. . . . . . . . . . . . . . . . .
Reject Flow. . . . . . . . . . . . . . . .
Reject Recycle Flow. . . . . . . . .
Nominal Recovery . . . . . . . . . .
Membranes
Membranes/Vessel . . . . . . . . . .
Membrane Quantity . . . . . . . . .
Vessels
Vessel Array . . . . . . . . . . . . . . .
Vessel Quantity. . . . . . . . . . . . .
System Dimensions
HxWxD
inches . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping Weight
lb . . . . . . . . . . . . . . . . . . . . . .
kg. . . . . . . . . . . . . . . . . . . . . .
Controls Service . . . . . . . . . . . .
Motor Service . . . . . . . . . . . . . .
Motor HP . . . . . . . . . . . . . . . . .
Amp Draw. . . . . . . . . . . . . . . . .
50 gpm
67 gpm
17 gpm
5 gpm
75%
100 gpm
133 gpm
33 gpm
—
75%
165 gpm
220 gpm
55 gpm
—
75%
200 gpm
207 gpm
67 gpm
—
75%
250 gpm
333 gpm
83 gpm
—
75%
3
12
4
24
4
40
6
48
6
60
2:1:1
4
4:2:1
7
5:3:2
10
5:3
8
6:4
10
85x44x150
81x55x190
81x55x190
90x60x275
90x60x275
216x112x381 206x140x483 206x140x483 229x152x699 229x152x699
4400
1996
7500
3402
7500
3402
9000
4082
9000
4082
120V
480V
10
14
120V
480V
20
27
120V
480V
25
34
120V
480V
30
40
120V
480V
40
52
**Product flow rates are based on 16-17 GFD flux rates for well water feed. These product flow rates may not be appropriate for other feed waters.
An application specialist can de-rate the units for other feed water conditions.
Due to different feed flow requirements and membrane type, the cartridge filter housings must be sized and ordered separately.
BACK
Siemens
Water Technologies
182
Service Deionization (SDI) Systems
Service Deionization (SDI) from Siemens is a convenient and economical way to
produce high-purity water from potable feed water. SDI systems consist of activated
carbon and ion-exchange resin contained in portable tanks, custom-designed and
configured to meet your water purity requirements, flow rates and budget. With SDI
systems, you don’t have to make a major capital investment, handle chemicals or
maintain equipment — our technically trained service representatives handle tank
delivery, installation and maintenance.
Siemens offers SDI systems and resins that have been regenerated in our GMP (Good
Manufacturing Practices) facility to ensure stringent quality control for critical
pharmaceutical and dialysis applications.
Resin, a Grade for Every Application
Industrial-grade systems produce greater than 14 megohm-cm quality water, are
extremely durable and can be operated at flow rates up to 150 gallons per minute or
higher when multiple systems are placed in parallel. They are especially well suited
for applications where large resin capacities are required.
Premium-grade systems are designed for high-quality applications requiring up to
18 megohm-cm water quality. Filled with Type I or Type II resin, these systems meet
CAP Type I and NCCLS Type I specifications for clinical applications. Our premiumgrade resin manufacturing process is fully batch controlled to ensure consistent
quality.
Ultra-grade, QSR Compliant
Ultra-grade systems are designed for critical laboratory, medical, dialysis and
pharmaceutical applications. These systems deliver up to 18 megohm-cm water
quality with superior silica removal and significantly lower TOC levels. Our ultragrade resin manufacturing and regeneration processes are fully documented and
batch controlled, in compliance with good manufacturing practices and quality
system regulations.
Siemens
Water Technologies
BACK
183
Quality System Requirements (QSR)
Mixed bed deionizers are specifically processed under QSR requirements in an FDA
registered facility as a medical device for hemodialysis and ultra pure laboratory
applications. These resins are controlled for not only ionic contaminant removal but also
for reduced bacterial and endotoxin limitations. Each regenerated service unit is tested
for pressure integrity and product water quality before it is installed in your plant.
Quality Tested Before it Reaches You
Quality Control
Incoming QC: Raw materials must meet quality specifications.
In-Process QC: Each component has its own operating criteria, and the entire process is
monitored.
Final Product QC: Materials are double-checked for quality with results recorded in the batch
record.
Disinfection
Each service unit is chemically disinfected before refilling.
Document Control
We have a comprehensive document control system. No process changes are made
without proper notification and approval.
Tank Traceability
The serial number of each service unit is recorded on the production control log, so total
traceability is ensured.
Siemens
Water Technologies
BACK
184
Choose from a Wide Range of Deionizers and Carbons
Cation-bed Deionizers have a high capacity for removing positively charged
dissolved ionic contaminants such as calcium, sodium, magnesium, potassium, iron
and manganese. The durable gel resins provide stability against osmotic, thermal and
impact shock.
Anion-bed Deionizers have a high capacity for removing negatively charged
dissolved ionic contaminants such as carbonate, bicarbonates, sulfates, chlorides,
nitrates and silica. The durable gel resins used are stable against osmotic, thermal
and impact shock. A variety of anion resins are available, suitable for virtually any
water application.
Mixed-bed Deionizers provide higher quality, and a more neutral pH than separate
bed systems as well as enhanced silica and CO2 removal. Our units are guaranteed to
produce the quality of water required for any removal application, up to 18 megohmcm resistivity at 25°C. In-line quality monitors immediately alert users when resin
tanks need to be changed.
Ultra Mixed-bed Deionizers provide superior silica removal and significantly lower
TOC levels. Ideal for microelectronics and pharmaceutical applications where stricter
controls of critical contaminants are required.
Macroporous Organic Scavenger Resins offer extra-large internal surface areas and
can therefore provide higher adsorption of dissolved and undissolved organic
contaminants. The strongly basic anion resins will remove not only those organic
ions normally removed by standard anion exchange, but those that would normally
pass right through most demineralizers.
Colloidal Scavenging Deionizers have a high capacity for removing inorganic and
organic anions. The durable, macroporous resins are extremely resistant to organic
fouling, and efficiently remove colloids.
Activated Carbon Units remove chlorine and some dissolved organic contaminants.
Each replacement carbon unit contains virgin carbon to assure maximum water
quality and service life of the bed.
GMP Tanks for dialysis and validated processes are also available.
SDI is flexible and can be customized to meet your needs. Contact Technical Support at
(800) 875-7873, ext. 5000 to discuss your requirements and set-up a site visit and water analysis.
Siemens
Water Technologies
BACK
SOFTENERS
185
KF Series Softeners
KF Series Water Softeners are lightweight, with corrosion-resistant FRP pressure vessel
and cost-effective top mounted valve for commercial and light industrial applications.
• Fiberglass tanks are durable and corrosion-free
• Tank liners are blow-molded plastic wrapped in high-strength fiberglass and have
epoxy resin for worry-free service
• Softeners include a motorized, 5-cycle control valve that is quiet, efficient and
dependable
• Automatic regeneration controller is an electromechanical timer
• Duplex systems are available for applications that require a continuous supply
of softened water
equipment during regeneration
Series KFZSS
Tank Size
(DxH in)
9x40
12x52
14x65
16x65
18x65
21x62
24x72
30x72
36x72
42x72
48x72
Pipe
Size
(in)
1.0
1.0, 1.5
1.0, 1.5
1.0, 1.5
1.5, 2.0
1.5, 2.0
1.5, 2.0
2.0, 3.0
3.0
3.0
3.0
Application
Commercial* RO-Feed**
Service
Service
Flow
Flow
19 gpm
39 gpm
42 gpm
46 gpm
81 gpm
77 gpm
91 gpm
105 gpm
250 gpm
268 gpm
275 gpm
3 gpm
6 gpm
9 gpm
12 gpm
15 gpm
21 gpm
30 gpm
45 gpm
60 gpm
75 gpm
120 gpm
Backwash
Flow
2 gpm
3.5 gpm
5 gpm
7 gpm
9 gpm
12 gpm
15 gpm
25 gpm
35 gpm
50 gpm
70 gpm
Capacity at
Media
15 lbs./CF
Vol.
(Grains in 000's) (ft3)
30
60
90
120
150
210
300
450
600
750
1200
115V/1 ph /60 Hz – 10 watts
1
2
3
4
5
7
10
15
20
25
40
Overall
Shipping
Dimensions Weight
LxDxH (in) lb. (kg)
33x20x50
36x20x66
44x24x79
46x24x79
50x24x80
50x24x80
60x30x89
66x40x92
88x40x100
105x50x112
111x50x112
160 (73)
300 (136)
450 (204)
530 (240)
730 (331)
900 (408)
1860 (843)
1940 (880)
2460 (1116)
2880 (1306)
3660 (1660)
Salt
Storage
lb. (kg)
350 (159)
350 (159)
700 (318)
700 (318)
700 (318)
700 (318)
1000 (454)
1000 (454)
1800 (817)
3700 (1679)
3700 (1679)
*Flow is based on a differential pressure of <25 psid. Capacity is based on 10 gpg total hardness as CaCO3 that is free of color, oil and turbidity, and
regeneration is at 15 lbs. NaCl/ft 3.
**Maximum (RO Pretreatment) flow rate calculated at 3 gpm/ft3
Catalog Number:
KFZSS
XXX
Description . . . . . . . . . . . . . . KFZSS - Single 009, 012, 014,
016, 018, 021,
024, 030, 036,
Pressure Vessel Diameter . . . . . . . . . . . . . . . . 042, 048
Pressure Vessel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F
PZV
XZF
X
X
F = Non-Code
Fiberglass
A = 1.0"
XZF = NEMA 3R Equivalent 7-day Timelock B = 1.5"
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PZV = NEMA 3R Equivalent Volume Initiation C = 2.0"
Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E = 3.0"
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Not all pipe sizes are available on the standard units, please use the specifications for standard sizes.
X = No
Option
†All sizes are not available with every size.
BACK
Siemens
Water Technologies
186
SOFTENERS
KF Series Duplex Alternating Softeners
KF Series Duplex Alternating Water Softeners are lightweight, with corrosionresistant FRP pressure vessel, and cost-effective top-mounted valve for
commercial and light industrial applications.
• Tank liners are blow-molded plastic wrapped in high-strength fiberglass and
units have epoxy resin for worry-free service
• Softeners include two motorized, 5-cycle control valves that are quiet,
efficient and dependable
• Automatic regeneration controller with volume initiation facilitates operation
• Maintains flow at all times. One unit is operating while second unit
regenerates and is then in standby
Series KFZSD
Tank Size
(D x H)
(inch)
9 x 40
12 x 52
14 x 65
16 x 65
18 x 65
21 x 62
24 x 72
30 x 72
36 x 72
42 x 72
48 x 72
Pipe
Size
(in.)
1
1, 1.5
1, 1.5
1, 1.5
1.5, 2
1.5, 2
1.5, 2
2, 3
3
3
3
Application
Commercial* RO-Feed** Backwash Capacity at
Media
Service
Service
Flow
15 lbs./CF
Vol.
Flow
Flow
(Grains in 000's) (ft3)
19 gpm
39 gpm
42 gpm
46 gpm
81 gpm
77 gpm
91 gpm
213 gpm
250 gpm
268 gpm
275 gpm
2 gpm
3.5 gpm
5 gpm
7 gpm
9 gpm
12 gpm
15 gpm
25 gpm
35 gpm
48 gpm
63 gpm
3 gpm
6 gpm
9 gpm
12 gpm
15 gpm
21 gpm
30 gpm
45 gpm
60 gpm
75 gpm
120 gpm
30
60
90
120
150
210
300
450
600
750
1200
Shipping
Weight
lb. (kg)
1
2
3
4
5
7
10
15
20
25
40
270 (123)
500 (227)
750 (341)
880 (400)
1,220 (554)
1,500 (681)
3,100 (1,407)
3,240 (1,470)
4,100 (1,860)
4,800 (2,178)
6,100 (2,767)
Brine Tank Size
DxH
inch (cm)
18x40 (46x102)
18x40 (46x102)
24x50 (61x127)
24x50 (61x127)
24x50 (61x127)
24x50 (61x127)
24x50 (61x127)
30x48 (77x122)
39x48 (100x122)
50x60 (127x153)
50x60 (127x153)
Electrical Requirements . . . . . . . . . . . . . . . . . . . 115 V/1 ph/60 Hz – 10 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*Flow is based on a differential pressure of <25 psid. Capacity is based on 10 gpg total hardness as CaCO3 that is free of color, oil and turbidity and regeneration is at 15 lbs. NaCl/ft3.
Catalog Number:
Description . . . . . . . . . . . . . . . . . .
KFZSD
XXX
KFZSD - Duplex 009, 012, 014
016, 018, 021
Pressure Vessel Diameter . . . . . . . . . . . . . . . . . . . . . . 024, 030, 036
042, 048
F
P
F = Non-Code
P = NEMA 3R
Pressure Vessel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fiberglass
Equivalent
Control Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
with electronic controls
Level of Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Z
V
X
X
Z = Stand Alone
V = Vol. Initiated Alternating
A = 1”
with Totalizer
B = 1.5"
Backwash/Regeneration Initiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(with electronic controls)
C = 2.0"
Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E = 3.0"
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. X = No Option
Siemens
Water Technologies
BACK
187
SOFTENERS
KF Series Twin Alternating Softeners
KF Series Twin Alternating Water Softeners are lightweight, with corrosion-resistant
FRP pressure vessel, and cost-effective top mounted valve for commercial and light
industrial applications.
• Tank liners are blow-molded plastic wrapped in high-strength fiberglass and units
have epoxy resin for worry-free service
• Softeners include a single motorized, 5-cycle control valve that is quiet, efficient
and dependable
• Automatic regeneration controller with volume initiation facilitates operation
equipment during regeneration
Series KFZST
Tank Size
(DxH in)
7x44
9x40
10x54
12x52
14x65
16x65
18x65
21x62
24x72
Pipe
Size
(in)
1.0
1.0
1.0
1.0, 1.5
1.0, 1.5
1.0, 1.5
1.5
1.5
1.5
Application
Commercial* RO-Feed** Backwash Capacity at
Service
Service
Flow
15 lb./CF
Flow
Flow
(Grains in 000's)
15 gpm
19 gpm
18 gpm
39 gpm
42 gpm
46 gpm
54 gpm
52 gpm
68 gpm
Electrical Requirements . . . . . . . . . . . . .
1.5 gpm
3 gpm
4.5 gpm
6 gpm
9 gpm
12 gpm
15 gpm
21 gpm
30 gpm
1.5 gpm
2 gpm
3 gpm
3.5 gpm
5 gpm
7 gpm
9 gpm
12 gpm
15 gpm
15
30
45
60
90
120
150
210
300
115 V/1 ph /60 Hz – 10 watts
Media
Vol.
(ft3)
0.5
1
1.5
2
3
4
5
7
10
Overall
Dimensions
LxDxH (in)
Shipping
Weight
lb. (kg)
33x18x53
33x20x49
34x20x63
36x20x62
44x24x75
46x24x75
50x24x75
50x24x80
60x30x88
120 (55)
190 (86)
250 (114)
310 (141)
550 (250)
700 (318)
1050 (476)
1220 (553)
1610 (730)
Salt
Storage
lb. (kg)
350 (159)
350 (159)
350 (159)
350 (159)
700 (318)
700 (318)
700 (318)
700 (318)
1000 (454)
*Flow is based on a differential pressure of <25 psid. Capacity is based on 10 gpg total hardness as CaCO3 that is free of color, oil and turbidity, and regeneration is at
15 lbs. NaCl/ft 3.
Catalog Number:
KFZST
Description . . . . . . . . . . . . . . . . . . KFZST - Twin
............................
Pressure Vessel Diameter . . . . . . . . . . . . . . . . . . . . . .
XXX
007, 009, 010,
012, 014, 016,
018, 021, 024,
F
X
Z
N
X
X
F = Non-Code
Pressure Vessel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fiberglass
Control Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P = NEMA 3R Equivalent
Level of Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Z = Stand Alone
N = Volume Initiated; Single Meter
Backwash/Regeneration Initiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
w/Lock-Out (electromechanical) A = 1.0"
Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B = 1.5"
X = No
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Option
BACK
Siemens
Water Technologies
188
SOFTENERS
VP Series Softeners
VP Series Softeners are a low cost, reliable and efficient way to purify water. These
rugged, pre-engineered, pre-assembled units minimize installation and start-up costs
and are ideal for boiler feed, process water or rinse water applications.
• VPES denotes Non-ASME code vessels offered with express delivery
• VPAS denotes ASME code vessels with stamp available
• Structural steel legs (seismic zone 4) provide rigid support of vessel for safety
• Skid mount (seismic zone 4) with structural steel beams for duplex systems
• Standard epoxy internal and external coating extends vessel life
Model Number
Flow Rates
Good
Better
Best
Backwash Flow Rate
Media (cubic feet)
Capacity, Kgr CaCO3 (15 lb./CF)
System Dimensions*
Pipe Size
Column Size (D x H)
inch
cm
Brine Tank Size - inch
*H x W x D Simplex - inch
(Duplex) - inch
Simplex - cm
(Duplex) - cm
Shipping Weight
lb. – Simplex (Duplex)
kg – Simplex (Duplex)
Operating Weight
VPES/VPAS-024
VPES/VPAS-030
VPES/VPAS-630
VPES/VPAS-636
VPES/VPAS-736
50
35
20
17
7
210
70
50
30
27
10
300
105
75
45
27
15
450
140
100
60
39
20
600
175
125
75
39
25
750
1-1/2”
2”
2-1/2”
2-1/2”
3”
24x48
61x122
24x48
76x41x41
(80x97x41)
193x104x104
(204x264x104)
30x48
77x122
30x60
78x43x48
(82x97x48)
198x109x122
(209x277x122)
30x60
77x153
30x60
90x51x47
(100x97x60)
229x130x119
(254x246x152)
36x60
92x153
48x48
96x51x57
(100x97x60)
244x130x145
(254x246x152)
36x72
92x183
52x60
108x55x58
(112x97x60)
274x140x147
(284x246x152)
1,100 (2,260)
499 (1,026)
1,540 (3,080)
699 (1,398)
1,890 (3,780)
858 (1,715)
2,680 (5,360)
1,216 (2,432)
3,050 (6,100)
1,384 (2,767)
1,930 (3,860)
2,740 (5,480)
876 (1,751)
1,243 (2,486)
110 V / 60 Hz / 1 ph / 3 watts
3,390 (6,780)
1,538 (3,076)
4,870 (9,740)
2,209 (4,418)
5,590 (11,180)
2,536 (5,072)
*Approximate
**Rating for metallic piping only. Plastic piping requires aeration due to line velocities.
Siemens
Water Technologies
BACK
SOFTENERS
189
VP Series Softeners
Model Number
VPES/VPAS-742
VPES/VPAS-748
VPES/VPAS-754
Flow Rates
Good
245
280
350
Better
175
200
250
Best
105
120
150
Backwash Flow Rate
53
69
87
Media (cubic feet)
30
40
50
Capacity, Kgr CaCO3 (15 lb./CF) 900
1,200
1,500
System Dimensions*
Pipe Size
3”
4”
4”
Column Size (D x H)
inch (cm)
42x72 (107x183)
48x72 (122x183)
54x72 (139x183)
Brine Tank Size, inch
52x60
52x60
55x70
*H x W x D Simplex - inch
112x55x63
118x62x76
121x65x82
(Duplex) - inch
(116x132x71)
(122x133x76)
(123x158x82)
Simplex - cm
284x140x160
300x157x193
307x165x208
(Duplex) - cm
(295x335x180)
(310x338x193)
(312x401x208)
Shipping Weight
lb.– Simplex (Duplex)
4,070 (8,140)
5,300 (10,600)
7,070 (14,140)
1,847 (3,693)
2,405 (4,809)
3,207 (6,414)
Operating Weight
7,590 (15,180)
9,880 (19,760)
12,980 (25,960)
3,443 (6,886)
4,482 (8,963)
5,888 (11,776)
110 V / 60 Hz / 1 ph / 3 watts
*Approximate
**Rating for metallic piping only. Plastic piping requires aeration due to line velocities.
VPES/VPAS-760
VPES/VPAS-772
420**
300
180
108
60
1,800
N/A
500**
300
156
100
3,000
4”
4”
60x72 (153x183)
55x70
125x70x88
(128x158x97)
318x178x224
(325x401x246)
72x72 (183x183)
69x84
129x79x100
(131x158x100)
328x201x254
(333x401x254)
8,550 (17,100)
3,879 (7,757)
13,350 (26,700)
6,056 (12,111)
15,830 (31,660)
7,181 (14,361)
24,130 (48,260)
10,946 (21,891)
VP Series Softeners have extensive option packages. For ordering instructions, or additional
product information, please contact technical support at 800.875.7873 extension 5000.
In accordance with Siemens policy for continual product development and
improvements, we reserve the right to change the product information
within this literature at any time, without notice.
Siemens
Water Technologies
BACK
190
STORAGE TANKS
Storage, Polyethylene, Conical-bottom,
Gasket Lid w/Stand
The conical bottom polyethylene storage tank (55 to 2,000 gallons) insures
complete tank drainage for cleaning and sanitization operations. The tank is
constructed of virgin high-density FDA approved polyethylene and supported by
a structural steel stand painted with an acid resistant epoxy.
• Each tank includes seven factory installed polyethylene half coupling fittings
welded and tapered into the tank wall
• Polyethylene tank lid with neoprene flat gasket seal is bolted to the tank for air
tight access to the tank interior
• 3-position level controller, hydrophobic vent filter, nitrogen blanket system and
vacuum/pressure relief valve optional
Catalog Number
TPCC00055
TPCC00100
TPCC00200
TPCC00250
TPCC00350
TPCC00500
TPCC00750
TPCC01000
System Dimensions
Dia. (D) x Overall Height (E) (inches)
Wall Thickness . . . . . . . . . . . . . .
28x64
3/16"
32x59
1/4"
35x86
1/4"
45x68
5/16"
46x88
5/16"
57x86
3/8"
68x88
3/8"
72x104
3/8"
Tank Volume (gallons) . . . . . . . .
Construction Materials . . . . . . . .
Maximum Service Temp. . . . . . .
Shipping Weight
Industrial (lbs.) . . . . . . . . . . . . . .
55
100
200
250
350
500
750
1000
Virgin, high-density polyethylene that is FDA approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rated to 160°F (70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fittings (factory installed)
Fill Fitting . . . . . . . . . . . . . . . . . .
Return Fitting . . . . . . . . . . . . . . .
Overflow Fitting . . . . . . . . . . . . .
Outlet Fitting. . . . . . . . . . . . . . . .
Vent Fitting . . . . . . . . . . . . . . . . .
Level/Sight Fittings. . . . . . . . . . .
75
160
200
250
350
425
540
640
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
two-.5" NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
two-.5" NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1"NPTF
two-.5" NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
Catalog Number
TPCC01500
TPCC02000
79x99
7/16"
86x103
7/16"
875
1025
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
Maximum Service Temp. . . . . . .
System Dimensions
D x H (inches) . . . . . . . . . . . . . .
Wall Thickness . . . . . . . . . . . . . .
Shipping Weight
Industrial (lbs.) . . . . . . . . . . . . . .
Fill Fitting . . . . . . . . . . . . . . . . . .
Return Fitting . . . . . . . . . . . . . . .
Outlet Fitting. . . . . . . . . . . . . . . .
Vent Fitting . . . . . . . . . . . . . . . . .
1500
2000
Virgin, high-density polyethylene
that is FDA approved
Rated to 160°F (70°C)
*Please contact Technical Support to obtain a drawing with exact fitting locations
Siemens
Water Technologies
BACK
191
STORAGE TANKS
Storage, Fiberglass, Dish-bottom,
Closed Top w/Skirt
Constructed from premium, non-pigmented resin, which meets FDA regulations
for food handling, each tank is shipped with one welded outlet siphon valve
fitting, one 1/2" welded half coupling, one overflow welded half coupling and
four bulkhead fittings.
Catalog Number
TFDC0014A
TFDC0024A
TFDC0034A
TFDC0045A
TFDC0059A
TFDC0073A
TFDC0087A
System Dimensions
D x H (inches) . . . . . . . . . . . . . .
Wall Thickness . . . . . . . . . . . . . .
30x62
5/32"
32x85
5/32"
38x85
7/32"
42x89
7/32"
48x92
7/32"
48x110
7/32"
48x129
7/32"
Shipping Weight
Industrial (lbs.) . . . . . . . . . . . . . .
145
245
345
445
590
735
875
Non-pigmented premium resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fittings
Fill Fitting . . . . . . . . . . . . . . . . . .
Return Fitting . . . . . . . . . . . . . . .
Outlet Fitting. . . . . . . . . . . . . . . .
Vent Fitting . . . . . . . . . . . . . . . . .
74
96
154
161
211
263
285
one-1"
one-1"
one-1"
one-1"
one-1"
one-1"
one-1"
one-1"
one-1"
one-1"
one-1.5"
one-1.5"
one-1.5"
one-1.5"
one-1"
one-1.5"
one-1.5"
one-1.5"
one-1.5"
one-1"
one-2"
one-2"
one-2"
one-2"
one-1"
one-2"
one-2"
one-2"
one-2"
one-1"
one-2"
one-2"
one-2"
one-2"
one-1"
Catalog Number
TFDC0102A
TFDC0151A
TFDC0200A
TFDC0250A
System Dimensions
D x H (inches) . . . . . . . . . . . . . .
Wall Thickness . . . . . . . . . . . . . .
60x101
5/32"
60x143
5/32"
90x90
3/16"
72x172
7/32"
474
567
1290
820
one-2"
one-2"
one-2"
one-2"
one-1"
one-2"
one-2"
one-2"
one-2"
one-1"
one-2"
one-2"
one-2"
one-2"
one-1"
one-2"
one-2"
one-2"
one-3"
one-1.5"
Shipping Weight
Industrial (lbs.) . . . . . . . . . . . . . .
Fittings
Fill Fitting . . . . . . . . . . . . . . . . . .
Return Fitting . . . . . . . . . . . . . . .
Outlet Fitting. . . . . . . . . . . . . . . .
Vent Fitting . . . . . . . . . . . . . . . . .
1020
1515
2000
2500
Non-pigmented premium resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siemens
Water Technologies
BACK
192
STORAGE TANKS
Storage, Polyethylene, Flat-bottom,
Domed Top
Siemens flat bottom polyethylene storage tank (55 to 6,500 gallons) has a closed
cover design with a siphon valve fitting at the tank bottom for maximum
drainage. The seamless one piece construction is fabricated from FDA approved
virgin high density polyethylene.
• Each tank includes seven factory installed polyethylene half coupling fittings
welded and tapered into the tank wall
• Fume tight gasketed handway or manway is mounted on the top of the closed
tank to provide access to the interior
• 3-position level controller, hydrophobic vent filter, nitrogen blanket system and
vacuum/pressure relief valve optional
Catalog Number
Maximum Service Temp . . . . . . .
System Dimensions
D x H (inches) . . . . . . . . . . . . . .
Wall Thickness . . . . . . . . . . . . . .
Shipping Weight
Industrial (lbs.) . . . . . . . . . . . . . .
TPFC00055
TPFC00110
TPFC00165
TPFC00220
TPFC00300
TPFC00500
TPFC00750
TPFC01000
20x38
3/16"
35x36
3/16"
31x58
3/16"
35x63
3/16"
35x81
3/16"
46x76
1/4"
46x119
1/4"
64x81
1/4"
55
110
165
220
300
500
750
1000
Virgin, high-density polyethylene that is FDA approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rated to 160°F (70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fill Fitting . . . . . . . . . . . . . . . . . .
Return Fitting . . . . . . . . . . . . . . .
Outlet Fitting. . . . . . . . . . . . . . . .
Vent Fitting . . . . . . . . . . . . . . . . .
Handway . . . . . . . . . . . . . . . . . .
25
45
50
70
90
120
200
220
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
two-.5" NPTF
one-8"
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
one-1"NPTF
two-.5" NPTF
one-5"
one-1.5"NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1"NPTF
two-.5" NPTF
one-8"
one-1.5"NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1.5"NPTF
one-1"NPTF
two-.5" NPTF
one-5"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-16"
Catalog Number
TPFC01500
TPFC02000
TPFC02500
TPFC03000
TPFC03600
TPFC04000
TPFC05000
TPFC06500
64x121
3/8"
64x144
3/8"
95x89
3/8"
95x105
7/8"
86x156
7/8"
95x140
1/2"
120x151
1/2"
120x144
7/8"
365
525
550
660
1050
1100
1400
1600
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-8"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-1"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-3"NPTF
one-1.5"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-3"NPTF
one-1.5"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-3"NPTF
one-1.5"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-3"NPTF
one-1.5"NPTF
two-.5" NPTF
one-16"
one-2"NPTF
one-2"NPTF
one-2"NPTF
one-3"NPTF
one-1.5"NPTF
two-.5" NPTF
one-16"
Maximum Service Temp . . . . . . .
System Dimensions
D x H (inches) . . . . . . . . . . . . . .
Wall Thickness . . . . . . . . . . . . . .
Shipping Weight
Industrial (lbs.) . . . . . . . . . . . . . .
Fill Fitting . . . . . . . . . . . . . . . . . .
Return Fitting . . . . . . . . . . . . . . .
Outlet Fitting. . . . . . . . . . . . . . . .
Vent Fitting . . . . . . . . . . . . . . . . .
Handway . . . . . . . . . . . . . . . . . .
1500
2000
2500
3000
3600
4000
5000
6500
Virgin, high-density polyethylene that is FDA approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rated to 160°F (70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siemens
Water Technologies
BACK
193
STORAGE TANKS
Terrapure®1,2 Storage Tanks
Terrapure® Storage Tanks are designed for the purest process water or chemistries.
They have a one-piece capsule design that provides for complete drainage.
• Viton®-gasketed 6" screw lid maintains nitrogen blanket pressure
• Supplied with six unique “no-profile” fittings ensure that there are no internal tank
protrusions to collect particles, and no crevices, welds or seams to support microbial
growth
• Totally enclosed, one-piece rotationally molded construction yields a rugged,
seamless, corrosion-free container suitable for an almost unlimited number of
solution, storage and dispensing applications
• All-plastic pedestal molded entirely of LPE (no metal reinforcement), capable of
supporting loads up to 4000 lb.
• Convenient “mousehole” provides easy access to the bottom center fitting
• Only 34" in diameter to fit through standard doors
• Can be steam cleaned (up to 190°F) and features materials that comply with FDA
regulations
Catalog Number
Capacity
gallons. . . . . . . . . . . . . . . .
Base Material . . . . . . . . . . . . . . .
System Dimensions
A. . . . . . . . . . . . . . . . . . . . . . . . .
B. . . . . . . . . . . . . . . . . . . . . . . . .
C. . . . . . . . . . . . . . . . . . . . . . . . .
TPPBWF125
TPSBWF125
TPPBWF250
TPSBWF250
125
Plastic
125
Steel
250
Plastic
250
Steel
44"
61"
5/16"
44"
67"
5/16"
81"
96"
5/16"
81"
104"
5/16"
Shipping Weight
Tank (lbs.) . . . . . . . . . . . . . . . . .
50
50
81
Pedestal (lbs.) . . . . . . . . . . . . . .
68
100
68
1 Tank must be vented to atmosphere at all times
2 Food grade construction complies with FDA regulations
1: 6" Viton® gasketed screw cap
2: Painted Carbon Steel Stand
3: Molded-in fitting flats (typical 8 places)
81
100
Siemens
Water Technologies
BACK
194
EPV™ High Purity Water Systems
Siemens has developed a comprehensive water system product line tailored to clients
requiring validation level documentation. The Economical, Pre-Packaged, Validatable
High Purity Water Systems offer a complete water system package that meets the most
common quantity and quality requirements of the Laboratory, Medical, and BioPharm
markets.
Whatever level of water quality you require, there’s an EPV™ System to meet your
needs. Designed to produce flow rates from 0.1 to 50 gallons per minute (gpm), at the
point of use, these integrated, skid-mounted systems include pretreatment, make-up
water, storage and distribution equipment - everything you need to ensure a reliable,
cost-effective, supply of high-purity water, all with validation level documentation.
Standard Features:
• Developed for laboratory, biotechnology and pharmaceutical applications
• Multiple configurations including: Service DI, Non-recirculating Pretreatment,
Continuous Recirculating Pretreatment, and Hot Water Sanitizable
• Easy installation / skid mounted
• Complete documentation package including O&M with installation, start-up and
operation procedures, P&ID, Electrical Schematics, Installation and Operational
Qualification Verification Data Sheets, and Quality Assurance data reports
• Optional documentation includes: Dry Factory Acceptance Test, Wet Factory
Acceptance Test, Installation Protocol, Operational Protocol, and Performance
Qualification Protocol
Benefits:
• Fast delivery with pre-manufactured systems
• Meets or exceeds the following water quality requirements: USP Purified Water, CAP I,
ASTM I, 18.2 megohm-cm resistivity
• Validation Assistance available for execution of the
Installation/Operational/Performance Qualifications
Siemens
Water Technologies
BACK
195
EPV™ Systems
Siemens
Water Technologies
BACK
196
PreVUE® and APEX™ Systems
Modular USP Purified Water Generation
Seven sizes—nominal flow rates range from 2 to 25 gpm. The PreVUE® and APEX™
systems are pre-engineered, totally integrated and automated biopharmaceutical
water purification systems. These characteristics help you expedite all phases of
planning, procuring and commissioning a new water purification system.
Pre-Engineered
• Prompt drawing submittals speed construction and planning
• Quick delivery keeps project moving fast
• cGMP design & construction assures quality Validation
• Fully functional wet FAT reduces start-up time
• Easily understood GAMP 4 formatted validation documentation
• Protocols submitted in advance of the equipment
Integrated Controls and Human Machine Interface (HMI)
• User friendly large color touch screen
Single-skid Design
• Fast installation saves time and money
• Smooth start-up
• Small footprint
Hot Water Sanitizable (optional on APEX™ system)
• Automated for reliable sanitization without chemicals
Proven Technologies
• RO and CDI-LX™ Systems for reliable, efficient and continuous operation
• Flexible configurations to meet your production needs
Siemens
Water Technologies
BACK
197
PreVUE® Systems
PERFORMANCE SPECIFICATIONS
Model
20
40
60
80
130
180
250
Maximum Product, gpm (m3/hr)
2.3 (.5)
4.4 (1)
6.6 (1.5)
8.8 (2)
15.3 (3.5)
19.8 (4.5)
28.8 (6.5)
Nominal Product, gpm (m3/hr)
2.0 (.45)
4.0 (.9)
6.0 (1.4)
8.0 (1.8)
13.0 (2.9)
18.0 (4.1)
25.0 (5.7)
Minimum Product, gpm (m3/hr)
1.5 (.3)
1.7 (.4)
3.4 (.8)
5.4 (1.2)
7.7 (1.7)
12.6 (2.9)
17.1 (3.9)
Maximum Feed, gpm (m3/hr)
3.3 (.7)
6.5 (1.5)
9.7 (2.2)
13.1 (3)
22.7 (5.1)
29.3 (6.6)
42.7 (9.7)
Maximum Drain, gpm (m3/hr)
10 (2.3)
12 (2.7)
15 (3.4)
20 (4.5)
30 (6.8)
40 (9.1)
60 (13.6)
Nominal Recovery, %
64
68
68
68
68
68
68
Inlet Pressure
60 to 95 psig regulated +/- 5 psig
Inlet Temperature
45 to 85°F (7.2 to 35°C)
Note: Flow rates and recoveries are contingent upon feedwater quality. Pressure and temperature regulation required by customer. Contact your local Siemens Water
Technologies sales representative for details.
PHYSICAL SPECIFICATIONS
Model
Height
Width
Depth
Shipping Weight, lbs (kgs)
Operating Weight, lbs (kgs)
Feed Water Inlet, Flanged
Product Outlet, Tri Clamp
Skid Drain, Flanged
Break Tank Capacity
20
3,300 (1497)
4,200 (1905)
3/4”
1/2”
ELECTRICAL SPECIFICATIONS
Requirements
EQUIPMENT SPECIFICATIONS
Softeners
Activated Carbon Filter
Pretreatment Filter
Pretreatment UV
Break Tank
RO Pump
RO Vessels
RO Membranes
CEDI Modules
Frame
Controls
HMI
OPTIONAL COMPONENTS
Sodium Bisulfite Injection
Hardness Monitor
pH Adjust
Final UV
Final Filter
40
60
78” (198 cm)
120” (305 cm)
60” (152 cm)
3,800 (1724)
4,400 (1996)
4,600 (2082)
5,500 (2495)
1”
1”
3/4”
3/4”
2”
37 gallons (140 liters)
80
4,600 (2087)
6,000 (2722)
1-1/2”
3/4”
130
180
78” (198 cm)
120” (305 cm)
66” (168 cm)
6,300 (2858)
7,500 (3042)
8,400 (3810)
9,700 (4400)
1-1/2”
2”
1”
1”
3”
250
8,600 (3901)
11,900 (5398)
2”
1-1/2 ”
480V, 3Ph
60 Hz
Fiberglass reinforced composite vessels with brass multiport valves (not hot water sanitizable)
Stainless steel vessel, 100 psig ASME code with removable insulation jacket
Stainless steel housing with 5.0 micron cartridge filter
Stainless steel chamber with 254 nm lamp
316L stainless steel with bolted lid
Stainless steel vertical multi-stage centrifugal with VFD
Fiberglass reinforced composite vessels, ASME code
Full fit thin film composite polyamide, hot water sanitizable
CDI-LX,™ hot water sanitizable
304 Stainless steel
PLC in NEMA 4X stainless steel enclosure
10” color touch screen
Metering pump and solution tank with manual rate control, chlorine analyzer for alarm
Hardness analyzer integrated into control system
Metering pump, solution tank and pH monitor with automatic rate control by control system
Sanitary stainless steel chamber with 254 nm lamp
Sanitary stainless steel housing with 0.1 micron cartridge filter
BACK
Siemens
Water Technologies
198
APEX™ Systems
PERFORMANCE SPECIFICATIONS
Model
20
40
60
80
130
180
250
Maximum Product, gpm (m3/hr)
2.3 (.5)
4.4 (1)
6.6 (1.5)
8.8 (2)
15.3 (3.5)
19.8 (4.5)
28.8 (6.5)
Nominal Product, gpm (m3/hr)
2.0 (.45)
4.0 (.9)
6.0 (1.4)
8.0 (1.8)
13.0 (2.9)
18.0 (4.1)
25.0 (5.7)
Minimum Product, gpm (m3/hr)
1.5 (.3)
1.7 (.4)
3.4 (.8)
5.4 (1.2)
7.7 (1.7)
12.6 (2.9)
17.1 (3.9)
Maximum Feed, gpm (m3/hr)
3.3 (.7)
6.5 (1.5)
9.7 (2.2)
13.1 (3)
22.7 (5.1)
29.3 (6.6)
42.7 (9.7)
Maximum Drain, gpm (m3/hr)
10 (2.3)
12 (2.7)
15 (3.4)
20 (4.5)
30 (6.8)
40 (9.1)
60 (13.6)
Nominal Recovery, %
64
68
68
68
68
68
68
Inlet Pressure
60 to 95 psig regulated +/- 5 psig
Inlet Temperature
45 to 85°F (7.2 to 35°C)
Note: Flow rates and recoveries are contingent upon feedwater quality. Pressure and temperature regulation required by customer. Contact your local Siemens Water
Technologies sales representative for details.
PHYSICAL SPECIFICATIONS
Model
Height
Width
Depth
Shipping Weight, lbs (kgs)
Operating Weight, lbs (kgs)
Feed Water Inlet, Flanged
Product Outlet, Tri Clamp
Skid Drain, Flanged
Break Tank Capacity
20
40
3,300 (1497)
4,200 (1905)
3/4”
1/2”
ELECTRICAL SPECIFICATIONS
Requirements
EQUIPMENT SPECIFICATIONS
Softeners
Activated Carbon Filter
Pretreatment Filter
Pretreatment UV
Break Tank
RO Pump
RO Vessels
RO Membranes
CEDI Modules
Frame
Controls
HMI
OPTIONAL CONFIGURATIONS
Sulfite Dechlorination
Hot Water Sanitization (APEX only)
Permeate Piping (APEX only)
OPTIONAL COMPONENTS
Sodium Bisulfite Injection
Hardness Monitor
pH Adjust
Final UV
Final Filter
60
78” (198 cm)
120” (305 cm)
60” (152 cm)
3,800 (1724)
4,400 (1996)
4,600 (2082)
5,500 (2495)
1”
1”
3/4”
3/4”
2”
80
4,600 (2087)
6,000 (2722)
1-1/2”
3/4”
130
180
78” (198 cm)
120” (305 cm)
66” (168 cm)
6,300 (2858)
7,500 (3042)
8,400 (3810)
9,700 (4400)
1-1/2”
2”
1”
1”
3”
250
8,600 (3901)
11,900 (5398)
2”
1-1/2 ”
480V, 3Ph 60 Hz
Fiberglass reinforced composite vessels with brass multiport valves (not hot water sanitizable)
Stainless steel vessel, 100 psig ASME code with removable insulation jacket
Stainless steel housing with 5.0 micron cartridge filter
Stainless steel chamber with 254 nm lamp
FRP dished bottom
Stainless steel vertical multi-stage centrifugal with VFD
Fiberglass reinforced composite vessels, ASME code
Full fit thin film composite polyamide, hot water sanitizable (optional)
CDI-LX,™ hot water sanitizable
Polyurethane painted carbon steel
PLC in NEMA 4 carbon steel enclosure
10” color touch screen
HWS option includes break tank heater, heater panel, and HWS membranes
Stainless steel piping (from RO/CEDI permeate)
Hardness analyzer integrated into control system
Metering pump, solution tank and pH monitor with automatic rate control by control system
Sanitary stainless steel chamber with 254 nm lamp
Sanitary stainless steel housing with 0.1 micron cartridge filter
Siemens
Water Technologies
BACK
199
Mobile Demineralization
For over 30 years, Siemens has met the short-term and emergency treated water needs
of our customers using our mobile demineralizer (DI) trailers. These trailers are the
treatment of choice for zero-discharge applications and seasonal treated water needs. A
reliable and extensive service network, an ever-expanding trailer fleet and strategically
located regeneration facilities allow Siemens Water Technologies to effectively serve our
large North American customer base.
Using mobile DI services, customers meet their treated water needs without on-site waste
generation, hazardous chemical handling and capital investments. The following types of
trailers allow Siemens to match our customers’ exact capacity and flow needs with the
correct trailer:
• MT 3000 is our three-vessel trailer with up to 3 million grain capacity and flows to 200 gpm.
• MT 4500 is our four-tank trailer that includes a weak-base anion vessel. With flows of
200 gpm and capacities up to 4 million grains on certain feedwaters, this trailer is
ideally suited for feedwaters with high free mineral acidity.
• MT 5000 is our largest mobile DI trailer with a nominal 5 million grain capacity. This is
a two-train trailer with a flow of 300 gpm per train (600 gpm total).
• MT 5500 is a our six-vessel trailer with a nominal 5 million grain capacity. This
trailer may be loaded in a variety of configurations to meet specific treatment
needs at flow rates to 600 gpm.
Generally used for short-term or emergency needs, mobile demineralizer trailers have
the maximum versatility you need. These trailers are specially designed using costeffective configurations allowing specific match to your site and feedwater conditions.
They provide a convenient source of water for pilot facilities, system scale-ups and
commercialization product testing. They are ideal for use during start-ups, preventative
maintenance and breakdowns of existing equipment. They provide large quantities of
high-purity water rapidly with no on-site waste.
SPECIFICATIONS
Series
MT 3000
Very effective for lower
capacity, lower flow rate and
low TDS water applications
(especially for power industry)
MT 4500
Very effective for low
alkalinity / high FMA
(free mineral acidity)
applications
MT 5000
Highest flow rate per
trailer in the industry,
completely automatic
two-train system
Nominal Exchange Capacity (kgr)* . . . . . . . . . . . . . .
3,000
4,500
Vessel Composition. . . . . . . . . . . . . . . . . . . . . . . . . .
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
ASME Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
Yes
Yes
Yes
Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vessel Lining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Tanks/Trailer
Vulcanized Rubber
4 Tanks/Trailer
5,000
MT 5500
High capacity, multiple
combinations for
versatility
of applications
6 Tanks/Trailer
Vulcanized Rubber
Vulcanized Rubber
Flow Rate (gpm) Min. / Max.. . . . . . . . . . . . . . . . . . .
50/200
50/200
50/600
Inlet / Outlet Hose Connections . . . . . . . . . . . . . . . .
2-1/2" Minimum
2-1/2" Minimum
2-1/2" Minimum
Inlet Pressure (psig) Min. / Max. . . . . . . . . . . . . . . . .
Weight (lbs.) Shipping / Operating . . . . . . . . . . . . . .
Dimensions – Width x Length x Height. . . . . . . . . . .
Trailer Electrical Requirements . . . . . . . . . . . . . . . . . . .
Heater Electrical Requirements . . . . . . . . . . . . . . . . . . .
45/100
35,000/42,000
8’ x 32’ x 13.5’
50/100
47,000/62,000
8’ x 32’ x 13.5’
60,000/84,500
8’ x 48’ x 13.5’
115V, Single Phase, 60 Hz, 10 Amps
............................................
Conductivity Meters on Primary and Polish Outlet Ports
............................................
Free Chlorine <0.25 ppm
Typical Water Service Quality . . . . . . . . . . . . . . . . . . . .
* Based on a 1µS/cm end point.
Vulcanized Rubber
40/100
2-1/2"– 4" Minimum
58,000/84,500
8.5’ x 48’ x 13.5’
(2) 115V, Single Phase, 60 Hz, 30 Amps
Flow Indicator and Totalizer on Main Header
Feedwater Requirements . . . . . . . . . . . . . . . . . . . . . . . .
6 Tanks/Trailer
50/400
40/100
Instrumentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
............................................
5,000
Pressure Gauges and Sample Ports
Turbidity <3 NTU
Conductivity: 0.1 - 1.0 µS/cm and Silica Leakage: <20 ppb
Siemens
Water Technologies
BACK
200
Mobile Clarification
1.5 MGD Maximum
The mobile clarifier unit from Siemens Water Technologies is a self-contained trailermounted system capable of treating highly turbid water (>1000 NTU). The system is
capable of producing extraordinarily clear effluent (0.5-1.0 NTU) with remarkable stability
under varying raw water conditions.
The Actiflo® clarification process from Kruger Inc. uses microsand as a seed to enhance
floc formation and increase settling rate. The microsand promotes production of higher
quality effluent than other types of clarification systems and is ideally suited for
treatment of raw water that is traditionally difficult to treat, such as: high or low
turbidity, high color/TOC, cold water, high algae, colloidal silica. Its stability, ease of
operation and small footprint make the clarifier trailer ideal for clarifying 750 gpm of
rapidly fluctuating raw water sources, in limited space and in frequent start-up/shutdown applications. The system provides clear effluent water in even the most
demanding raw water conditions.
Mobile systems contain instrumentation and equipment for a fully automatic and
monitored operation. Chemical feed skids and fail safe shut-down controls are also
included to ensure efficient and reliable operation.
When using Siemens mobile systems, we guarantee quality, quantity and cost of
produced water. All mobile equipment is backed with an inventory of standard critical
components. Our skilled service team is on-call 24 hours per day to meet your needs. We
have over 80 local service facilities across the United States to service your needs.
SPECIFICATIONS
Design Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.................................................
Operating Weight – Dimensions (LxWxH) 48' x 8'6" x 13' 6" .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coagulation Tank HRT @ design . . . . . . . . . . . . . . . . . . . . . .
Injection Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maturation Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settling Tank Load Rate @ design . . . . . . . . . . . . . . . . . . . . .
Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mechanical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.................................................
.................................................
Instrument–Influent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.................................................
.................................................
.................................................
Instrument–Effluent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Panel–PLC-based . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.................................................
.................................................
.................................................
.................................................
.................................................
1 MGD, design
1.5 MGD, max
95,000 lbs.
48 feet
8 feet, 6 inches
13 feet, 6 inches
1.7 minutes
1.7 minutes
6.0 minutes
30 gpm/ft2
480V, 3ph, 100 amps
8” flange inlet
10” flange outlet
4” flange drain
Raw water turbidity meter
Raw water pH meter
Raw water flow meter
Coagulated water pH meter
Clarified water turbidity meter
NEMA 12 UL® label
Operator interface display
Signal isolators
Surge protectors
Circuit breakers
I/O terminal strips
Siemens
Water Technologies
BACK
201
Mobile Reverse Osmosis (RO)
The Mobile RO unit from Siemens Water Technologies is a self-contained system that
employs pretreatment and reverse osmosis (RO) capability in a single trailer. The system
is capable of producing 200 gpm of low conductivity product water under a variety of
raw water conditions.
The versatile 200 gpm Mobile RO trailer can provide multi-media, carbon, or softening
pretreatment consistent with the raw water’s impurities. The trailer can be configured
as a 90 gpm double-pass unit for applications requiring extensive DI polishing. This
approach can reduce DI polishing costs by as much as 80-90%.
Because the RO unit combines pretreatment and RO in a single trailer, installation costs
and response times are reduced significantly. This means lower produced water costs
and minimum downtime for Siemens Water Technologies customers. Mobile systems
contain instrumentation and equipment for fully automatic and monitored operation.
Chemical feed skids and fail-safe shut-down controls are also included to ensure
efficient and reliable operation.
Siemens backs its mobile systems with a guarantee of quality, quantity and cost of
produced water. All mobile equipment is supported by an inventory of standard critical
components. A skilled service team is on-call 24 hours per day to respond to your needs.
SPECIFICATIONS
Dimensions (LxWxH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48’ x 8.5’ x 13.5’
Weight (Shipping/Operating) . . . . . . . . . . . . . . . . . . . . . . . . . . . 55,000 lbs. Max./70,000 lbs.
Feed Water (gpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133-506
Product Water (gpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-200
Drain (gpm)
Concentrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-66
Backwash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-240
Pressure (psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-90
Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 VAC/3 ph/200 Amp
Air Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SCFM @ 80 psig
Service Connections (150# PVC Flange)
Inlet/Outlet/Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4”/4”/4”
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4X w/Allen-Bradley® SLC-5/03
PLC Remote I/O – PLC Interface
Pretreatment Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 54" dia. (45-60 ft3) each
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Carbon, filter media (various), resin
FlexRO®-100 Units
Membranes (3:2:1 Array) . . . . . . . . . . . . . . . . . . . . . . . . . 24 ea (TFC or CA)
Prefilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 SS, 12 round x 3 high
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 HP Multi-stage
Instrumentation
Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product/Concentrate
Specific Conductance . . . . . . . . . . . . . . . . . . . . . . . . . . . Feed/Product
pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Feed
ORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Feed
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Various
Siemens
Water Technologies
BACK
202
PreFlex® Pretreatment Units
PreFlex® pretreatment units from Siemens Water Technologies are modular in design,
pre-plumbed, self-contained, skid-mounted units used in our mobile business. PreFlex®
units are designed to the highest engineering standards with ASME code tanks, NEMA
4X panels and pneumatically actuated solenoid valves enabling them to be used in a
wide variety of applications and environments including heavy industry.
Configured in parallel or series, these units can be combined with other Siemens mobile
products for a fully integrated water treatment system meeting your plant’s flow and
quality requirements. Units may be site or trailer installed with up to six PreFlex® 54
units per trailer.
Siemens Water Technologies maintains a large inventory of PreFlex® units and other
mobile assets as we continue to serve a large number of companies who depend upon
Siemens’ mobile capabilities and extensive service network for their short-term,
emergency, seasonal, pilot and temporary water treatment needs.
PreFlex® units are also used for various stand-alone pretreatment applications
including:
• Media filtration
• Activated carbon filtration
• Softening
• Dealkalization
• Iron and manganese removal
• TOC reduction
PreFlex® units are generally used for temporary needs including:
• Capacity expansions
• Pilot plant water
• Interim usage until a permanent system is installed • Process water quality changes
• Scheduled shutdowns
• Seasonal water needs
• Emergency water usages
• Feedwater quality changes
• Existing demineralization system environmental
salt discharge problems
Service Flow Rate (gpm) - Min./Max.
Backwash Flow (gpm). . . . . . . . .
Media Volume (Ft3) . . . . . . . . . . .
Exchange Capacity @ 10#/ft 3
Salt Dosage (kgr) . . . . . . . . .
Operating Pressure (psi) - Min./Max.
Pressure Drop (psig) . . . . . . . . . .
Operating Temp. (°F), Max. . . . .
Service Connections - Sch. 80 PVC
Inlet / Outlet / Waste (inches). . .
Weight (lbs.) - Shipping . . . . . . . .
- Operating . . . . . . . . . . . .
Dimensions. . . . . . . . . . . . . . . . . .
Electric Requirements . . . . . . . . .
Type . . . . . . . . . . . . . . . . . . . . . . .
Internal Lining . . . . . . . . . . . . . . .
Valves / Piping / Internals. . . . . .
...........................
Air Requirements . . . . . . . . . . . . .
Control Panel . . . . . . . . . . . . . . . .
Gauges. . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . .
PreFlex 54
ACF
MMF
SOFT
ACF
N/A
N/A
20 / 100
5 - 15
105
1,500
N/A
40/160
160
45
40/120
240
45
40/240
80
60
80/380
380
120
PreFlex 84
MMF
SOFT
N/A
20 / 100
5 - 15
105
3,750
80/300
540
120
4/4/4
6/6/4 or 6/6/6
2,700
2,700
7,700
7,700
7,700
12,500
10,200
24,600
32,200
27,500
54" W x 73" D x 97" H
92" W x 108" D x 128" H
120 V / 1 ph / 60 Hz - 10 Amps
Carbon Steel, ASME Code, 100 psi
Epoxy/Polyurethane
Butterfly Isolation & Solenoid Valves / Sch. 80 PVC / SS 316 Bottom
& PVC Top Distribution
10 SCFM (Instantaneous) @ 80 psig
NEMA 4X, Remote I/O Solenoid Panel
In / Out Pressure
Activated Carbon (ACF)
Fe and Mn Removal
Softening
Multimedia (MMF)
TOC Removal
Dealkalization
2,700
9,100
Siemens
Water Technologies
BACK
80/500
200
150
203
FlexTrex® Deionization Units
Flow Rates to 250 gpm
FlexTrex® deionization units from Siemens Water Technologies are skid-mounted ion
exchange units designed to treat flows ranging from 20 to 250 gpm per unit. FlexTrex®
units have quick disconnects and can be installed and brought on-line in a very short
period of time using flexible hoses.
Regenerated off-site, these portable units do not use hazardous chemicals, do not
generate any wastewater and are ideal for polishing raw or RO permeate water. In
certain instances, FlexTrex® units are an economical alternative to service deionization
bottles. These ASME tanks, with their rugged design, small footprint and ability to treat
high flow rates, are of tremendous advantage in many instances. With their 316 SS
construction, FlexTrex® 42 units treat water up to 140°F and are ideal for short or longterm condensate polishing applications.
FlexTrex® units can be configured in parallel or series and combined with other Siemens
products for a fully integrated water treatment system to meet your plant’s specific flow
and quality requirements. They are serviced and exchanged by Siemens’ extensive and
reliable service network, which is available 24 hours a day. Our regeneration facilities
and experienced service personnel ensure you receive an uninterrupted, consistent
supply of treated water of the quality and quantity you require.
Siemens can add controls and instrumentation to these units on an as-needed basis to
meet your application needs.
FlexTrex® modules are generally used for:
• Polishing
• Pilot plant water needs
• Process water quality changes
• Chlorine or chloramine removal
• Scheduled shutdowns
• Seasonal water needs
• Emergency water usages
• Feedwater quality changes
• Condensate polishing
• Softening
• Interim usage until a permanent system is installed
SPECIFICATIONS
FlexTrex® 36
Vessel Size . . . . . . . . . . . . . . . . . . . . . . .
Media Volume (ft3) . . . . . . . . . . . . . . . . .
Service Flow Rate (gpm) Min/Max. . . . .
Pressure Drop (psig) at 77°F . . . . . . . . .
Resin . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exchange Cap. (kgr) . . . . . . . . . . . . . . .
Operating Pressure (psi) Min/Max. . . . .
Operating Temperature (˚F) Max. . . . . .
Service Connections . . . . . . . . . . . . . . .
Vessel Specifications . . . . . . . . . . . . . . .
Type . . . . . . . . . . . . . . . . . . . . . . . . .
Internal Lining . . . . . . . . . . . . . . . . . .
Piping/Internals . . . . . . . . . . . . . . . . . . . .
Weight (lbs.) Shipping/Operating . . . . . .
Dimensions (WxDxH) . . . . . . . . . . . . . . .
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Media Options: . . . . . . . . . . . . . . . . . . . . . . .
36" x 48" Side Sheet
30
20 / 100
Approx. 15 at 100 gpm
SAC/SBA/MB
750/420/240
20/100
100
2" or 3"
FlexTrex® 42
42
35 / 150
SAC/SBA/MB
1050/588/336
20/100
140 (SS only)
3"
FlexTrex® 48
60
35 / 250
SAC/SBA/MB
1500/840/480
20/100
100
4"
Carbon Steel
316L SS
Carbon Steel
Vulcanized Rubber Lined
None
Vulcanized Rubber Lined
Sch. 80 PVC
Sch. 80 PVC / 316 SS
Sch. 80 PVC
2,000 / 3,400
3,500 / 4,200
5,000 / 8,000
40"x42"x78"
42"x49"x90"
50"x61"x92"
Lifting Lugs & Fork Lift Ports Provided -- Units Movable By Pallet Jack
Strong Acid Cation Resin (SAC)
Strong Base Anion Resin (SBA)
Weak Acid Cation Resin (WAC)
Weak Base Anion Resin (WBA)
Mixed Bed Resin (MB)
Activated Carbon
Super 30
36" dia. X 54" Side Sheet
30
20 / 100
SAC/SBA/MB
750/420/240
20/100
100
2"
Carbon Steel
Sprayed & Baked PVC
Sch. 80 PVC
2,000 / 3,400
36"x36"x76"
Organic Scavenging Media
Colloidal Removal Media
Siemens
Water Technologies
BACK
204
FlexRO® Reverse Osmosis Units
FlexRO® reverse osmosis units from Siemens Water Technologies are skid-mounted,
self-contained, 100 and 125 gpm reverse osmosis units. These units feature array
skids with:
• SS cartridge filter housing
• TEFC high efficiency motor
• Multistage high pressure pump
• State-of-the-art instrumentation
• NEMA 4X 480 VAC motor, starter panel with a 120 VAC step-down transformer
• Separate NEMA 4X control panel with PLC
With their rugged, modular design, FlexRO® units are convenient to install, connect,
startup and service. These units may be site installed and operated as stand-alone
units or installed inside a trailer (4 FlexRO® 100 units per trailer) and controlled by
the system panel. Combined with other Siemens Water Technologies mobile assets,
FlexRO® units are used to assemble fully integrated water treatment systems
designed to customers’ specific treated water quality and flow needs. These units
are economical even on low TDS feedwater. Operating as a pretreatment to
deionizers (DI), these units significantly reduce consumption of hazardous
chemicals, labor and waste; extend DI service cycles; and improve treated water
quality. Units may be installed in parallel for single pass or in series for double pass
applications. Both thin film composite (TFC) and cellulose acetate (CA) membranes
may be used in these units. Large inventories of mobile units, coupled with an
extensive service network enable us to respond quickly to our customers’ seasonal,
emergency, pilot or other short-term water treatment needs.
SPECIFICATIONS
FlexRO 100 Units:
FlexRO 100
FlexRO 125
Flow Rate @ 59°F gpm
Permeate / Concentrate / Feed . . . . . . . . . . . . .
100/33/133
125/42/167
Membranes (TFC or CA*)
Array / Quantity. . . . . . . . . . . . . . . . . . . . . . . . . .
3:2:1 (4M) / 24
4:2:1 (4M) / 28
Starter Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEMA 4X -- Includes 120 VAC step-down transformer
Motor Size, HP / Amps . . . . . . . . . . . . . . . . . . . .
50/65
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
460 VAC / 3 ph / 60 Hz
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEMA 4X with PLC
Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote I/O Panel / PLC Interface
Connections (Schedule 80 PVC)
Feed / Permeate / Concentrate . . . . . . . . . . . . .
3" / 3" / 1.5" Flanged
4" / 3" / 1.5" Flanged
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16' L X 3' D X 6'10" H
17" L x 3'4" D x 8'1" H
Weight (lbs.) Shipping / Operating. . . . . . . . . . . . .
5,200 / 6,500
5,300 / 6,800
Pressure Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . .
Cartridge Filter In/Out; Pump Discharge (Feed to Membrane); Interstage; Concentrate; Permeate
Temperature Gauge . . . . . . . . . . . . . . . . . . . . . . . .
Feed
Flow Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permeate and Concentrate
Conductivity Analyzer. . . . . . . . . . . . . . . . . . . . . . .
Feed and Permeate
Cartridge Filter Housing . . . . . . . . . . . . . . . . . . . . .
SS, 12 Round x 3 High
*Flows and recovery rates will be different with cellulose acetate membranes.
Siemens
Water Technologies
BACK
205
ZCS Series
Ultraviolet Light Sterilizers
UV radiation can be used as a pretreatment or polishing step to destroy bacteria and to
reduce total organics. Low pressure mercury discharge lamps are used to generate the
UV energy, emitted at either 254 or 185 nm. The UV energy emitted at 254 nm is used
as a non-chemical method for destroying microorganisms by altering the genetic
material, and rendering them unable to reproduce. The shorter, and therefore more
powerful 185 nm energy is used for the effective reduction of organics, commonly
referred to as TOC (total oxidizable carbon).
CSL-Series Ultraviolet Lights
The UV units are manufactured from 304 stainless steel. The UV light rays produced by
each lamp efficiently pass through the quartz sleeves and into the surrounding liquid
flowing through the UV treatment chamber. Stainless baffles are included in the
treatment chamber to induce turbulence and prevent channeling, maximizing the
exposure to ultraviolet radiation.
SP, SL and MP-2 Series Ultraviolet Lights
SPECIFICATIONS FOR ZCS SERIES 254nm ULTRAVIOLET STERILIZERS
Model Number
SP-1
SP-2
Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Max Design Flow (gpm)
Clear water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RO/DI water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Operating Press (psig)(8.3 bar) . . . . . . . . . . .
Inlet/Outlet Connection. . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (LxWxH)
inch . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . .
Model Number
Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Max Design Flow (gpm)
Clear water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RO/DI water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Operating Press (psig)(8.3 bar) . . . . . . . . . . .
Dimensions (LxWxH)
inch . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . .
UV STERILIZERS SPARE PARTS
Model Number
SL-10A
SL-1
MP-2-SL
2
2
120
3/8" NPTF
14x4x5
36x9x13
3
4
120
1/2"150# flange
10x6x19
26x16x48
10
12
120
1" 150# flange
14x7x38
36x17x97
20
24
120
1.5" 150# flange
38x7x21
97x18x53
ZCSL05010
4
ZCSL07810
6
ZCSL10010
8
ZCSL15610
12
40
50
120
2" 150# flange
41x11x21
104x28x53
60
78
120
2" 150# flange
41x11x21
104x28x53
80
100
120
3" 150# flange
45x12x28
104x28x53
130
156
120
3" 150# flange
45x12x28
114x33x67
SP-1
SP-2
SL-10A
SL-1
CSL-4R
CSL-6R
CSL-8R
CSL-12R
ZCSL00110
1
ZCSL00210
1
1
1
120
3/8" NPTF
14x4x5
36x9x13
CSL-4R
Replacement Lamp 254nm (dual ended) . . . . . . . . . . .
Validated Lamp 254nm (dual ended) . . . . . . . . . . . . . . .
Replacement Magnetic Ballast. . . . . . . . . . . . . . . . . . . .
Replacement Quartz Sleeve (dual ended). . . . . . . . . . .
ZCSPL3010
—
ZCSPB3318
ZCSPQ3110
Replacement Lamp 254nm (dual ended) . . . . . . . . . . .
Replacement Lamp 254 (single ended) . . . . . . . . . . . . .
Validated Lamp 254nm (dual ended) . . . . . . . . . . . . . . .
Validated Lamp 254nm (single ended). . . . . . . . . . . . . .
Replacement Electronic Ballast . . . . . . . . . . . . . . . . . . .
Replacement Quartz Sleeve (single ended) . . . . . . . . .
ZCSPL3084
ZCSPL17491
ZCSPL16676
ZCSPL18059
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
Model Number
CSL-6R
ZCSPL3011
—
ZCSPB3910
ZCSPQ3110
ZCSPL3084
ZCSPL17491
ZCSPL16676
ZCSPL18059
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
ZCSL00410
1
CSL-8R
ZCSPL3050
ZCSPL16714
ZCSPB4035
ZCSPQ3150
ZCSPL3084
ZCSPL17491
ZCSPL16676
ZCSPL18059
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
ZCSL01210
1
CSL-12R
ZCSPL3084
ZCSPL16676
ZCSPB4035
ZCSPQ3184
ZCSL02410
2
MP-2-SL
ZCSPL3084
ZCSPL16676
ZCSPB3354
ZCSPQ3184
ZCSPL3084
ZCSPL17491
ZCSPL16676
ZCSPL18059
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
NOTE: Thermistors, optical sensors, sanitary connections, ozone destruction, hot temperature units, light traps, and remote electrical controls
are available. Please contact Technical Support for detailed information. Mating flanges are not supplied with units.
Siemens
Water Technologies
BACK
206
ZHX Series
The next generation of UV systems utilize a new low pressure high intensity
long-life bulb that greatly increases the capacity per unit. This technology
requires up to 4 times less bulbs to accommodate the same flow as original lamp
designed systems.
• Hot water sanitizable with UV detector to 121˚C in place
• Disinfection 30,000 uW-s/cm2
• 240V/50Hz or 60Hz
• 9,000 hour life at 80% intensity end of life
• Temperature and UV combined in one detector package (option)
• Option for NIST traceable optical detector
• Option for UL Listed
SPECIFICATIONS
Model Number . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number . . . . . . . . . . . . . . . . . . . . . . .
No of UV Lamps . . . . . . . . . . . . . . . . . . . . . . . .
Max Flow (gpm) RO/DI . . . . . . . . . . . . . . . . . .
Std. Oper Press (psig) . . . . . . . . . . . . . . . . . . .
Inlet/Outlet Connection . . . . . . . . . . . . . . . . . . .
Dimensions (inches) . . . . . . . . . . . . . . . . . . . . .
HX02BDS
ZHXN04520
2
45
150
2” RF Flange
38x12x15
HX02BDL
ZHXN09020
2
90
150
2” RF Flange
68x12x15
HX02DDS
ZHXN11520
2
115
150
3” RF Flange
40x16x22
Model Number . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number . . . . . . . . . . . . . . . . . . . . . . .
No of UV Lamps . . . . . . . . . . . . . . . . . . . . . . . .
Max Flow (gpm) RO/DI . . . . . . . . . . . . . . . . . .
Std. Oper Press (psig) . . . . . . . . . . . . . . . . . . .
Inlet/Outlet Connection . . . . . . . . . . . . . . . . . . .
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
HX02DDL
ZHXN22020
2
220
150
3” RF Flange
68x12x24
HX04CDL
ZHXN30020
4
300
120
4” RF Flange
68x10x22
HX06CDL
ZHXN40520
6
405
120
4” RF Flange
68x10x22
HX02CDL
ZHXN15020
2
150
120
3” RF Flange
68x10x22
SPARE PARTS
HX - UV Sterilizer Spare Parts (30" for 45 and 115 gpm models,60" for all others)
Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
254nm Lamp 30" . . . . . . . . . . . . . . . . . . . . . . .
254nm Lamp 60" . . . . . . . . . . . . . . . . . . . . . . .
254nm Validated Lamp 30" . . . . . . . . . . . . . . .
185nm Lamp 30" . . . . . . . . . . . . . . . . . . . . . . .
185nm Lamp 60" . . . . . . . . . . . . . . . . . . . . . . .
30" Quartz Sleeve . . . . . . . . . . . . . . . . . . . . . .
60" Quartz Sleeve . . . . . . . . . . . . . . . . . . . . . .
Ballasts Electronic . . . . . . . . . . . . . . . . . . . . . .
Compression nuts . . . . . . . . . . . . . . . . . . . . . .
O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalog Number
ZCSPLGOLD-S
ZCSPLGOLD-L
ZCSPLCREAM-S
ZCSPLCREAM-L
ZCSPLSILVER-S
ZCSPLSILVER-L
ZCSPLTAN-S
ZCSPLTAN-L
ZCSPQ3184
ZCSPQ3198
ZCSPB416341
ZCSPM19685
ZCSPM4253
Additional higher flow models are available. Contact Technical Support.
Siemens
Water Technologies
BACK
207
ZCT Series
SPECIFICATIONS FOR ZCT SERIES 185nm ULTRAVIOLET LIGHTS
Model Number
SL-1 TOC
MP-2-SL TOC
CSL-4R TOC
CSL-6R TOC
CSL-8R TOC
CSL-12R TOC
Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Max Design Flow (gpm) RO/DI water . . . . . . . . . . . . . .
Design Flow Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Operating Press (psig) . . . . . . . . . . . . . . . . . .
Dimensions LxWxH inch . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . .
ZCTOOO310
1
3
3
120
1" 150# flange
14x7x38
36x 18x97
ZCTOOO510
2
5
5
120
1.5"150# flange
38x7x21
97x18x53
ZCTOO1110
4
11
11
120
2" 150# flange
41x11x21
104x28x53
ZCTOO1710
6
17
17
120
2" 150# flange
41x11x21
104x28x53
ZCTOO2210
8
22
22
120
2” 150# flange
41x11x21
104x28x53
ZCTOO3510
12
35
35
120
3” 150# flange
45x13x27
114x33x69
Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Max Design Flow (gpm) RO/DI water . . . . . . . . . . . . . .
Design Flow Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Operating Press (psig) . . . . . . . . . . . . . . . . . .
Dimensions LxWxH inch . . . . . . . . . . . . . . . . . . . . . . .
cm . . . . . . . . . . . . . . . . . . . . . . . .
ZCTOO4510
8
45
45
120
4" 150# flange
69x13x27
175x33x69
ZCTOO5810
10
58
58
120
4" 150# flange
69x13x27
175x33x69
ZCTOO7010
12
70
70
120
4" 150# flange
69x13x27
175x33x69
ZCTOO9010
16
90
90
120
4" 150# flange
69x13x27
175x61x66
ZCTO11510
20
115
115
120
4” 150# flange
69x13x27
175x61x66
ZCTO14010
24
140
140
120
4” 150# flange
69x13x27
175x61x66
UV LIGHT SPARE PARTS
Model Number
SL-1 TOC
MP-2-SL TOC
CSL-4R TOC
CSL-6R TOC
CSL-8R TOC
CSL-12R TOC
ZCSPL16678
ZCSPL16678
Model Number
Replacement Lamp 185nm (dual ended). . . . . . . . . . . .
Replacement Lamp 185nm (single ended) . . . . . . . . . .
Lamp 185nm (dual ended) . . . . . . . . . . . . . . . . . . . . . . .
Lamp 185nm (single ended) . . . . . . . . . . . . . . . . . . . . .
Replacement Electronic Ballast . . . . . . . . . . . . . . . . . . .
Model Number
Replacement Lamp 185nm (dual ended). . . . . . . . . . . .
Replacement Lamp 185nm (single ended) . . . . . . . . . .
Lamp 185nm (dual ended) . . . . . . . . . . . . . . . . . . . . . . .
Lamp 185nm (single ended) . . . . . . . . . . . . . . . . . . . . .
CSL-8R/60 TOC
ZCSPL3087
CSL-10R/60 TOC CSL-12R/60 TOC CSL-16R/60 TOC CSL-20R/60 TOC CSL-24R/60 TOC
ZCSPL3087
ZCSPL3087
ZCSPL18063
ZCSPL16678
ZCSPL18062
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
ZCSPL3087
ZCSPL18063
ZCSPL16678
ZCSPL18062
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
ZCSPL3087
ZCSPL18063
ZCSPL16678
ZCSPL18062
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
ZCSPL3087
ZCSPL18063Validated
ZCSPL16678Validated
ZCSPL18062
ZCSPB3354
ZCSPB16518
ZCSPQ3184
ZCSPQ18347
ZCSPL3095
ZCSPL17498
ZCSPL16679
ZCSPL18061
ZCSPB3354
ZCSPQ3198
ZCSPQ18348
ZCSPL3095
ZCSPL17498
ZCSPL16679
ZCSPL18061
ZCSPB3354
ZCSPQ3198
ZCSPQ18348
ZCSPL3095
ZCSPL17498
ZCSPL16679
ZCSPL18061
ZCSPB3354
ZCSPQ3198
ZCSPQ18348
ZCSPL3095
ZCSPL17498Validated
ZCSPL16679Validated
ZCSPL18061
ZCSPB3354
ZCSPQ3198
ZCSPQ18348
ZCSPB4035
ZCSPB3101
CSL-8R/60 TOC
CSL-10R/60 TOC CSL-12R/60 TOC CSL-16R/60 TOC CSL-20R/60 TOC CSL-24R/60 TOC
ZCSPQ3184
ZCSPL3095
ZCSPL17498
ZCSPL16679
ZCSPL18061
ZCSPB3354
ZCSPQ3198
ZCSPQ18348
ZCSPQ3184
ZCSPL3095
ZCSPL17498
ZCSPL16679
ZCSPL18061
ZCSPB3354
ZCSPQ3198
ZCSPQ18348
NOTE: Thermistors, optical sensors, sanitary connections, ozone destruction, hot temperature units, light traps, and remote electrical controls are available.
Please contact Technical Support for detailed information. Mating flanges are not supplied with units.
Siemens
Water Technologies
BACK
208
Replacement UV Monitoring System
Kits for Aquafine® Series UV Sterilizers
Upgrade existing UV sensors with new premium UV and temperature
monitoring technology.
An integrated NIST traceable (optional) UV and temperature monitoring system
will accurately monitor UV intensity and process water temperature of your
existing UV treatment equipment from Aquafine. The new design improves
reliability and performance accuracy in one state-of-the-art monitoring technology
system. Component cost savings and improved liability protection will be some of
the key benefits you will have with this state-of-the-art monitoring system. The
detector employs a Gallium Nitride (GaN) photodiode and a semiconductor
temperature sensor in a single package, along with its on-board electronics for
remote and local operation features:
• Detector: UV and temperature sensors in a single housing
• Optional NIST-traceable UV sensor calibration with certificate upon request
• No optical filters, no degradation
• Withstands non-operating temperatures of 250°F
• 121°C for steam sterilization at a maximum pressure of 250psi (17.2 bar)
• Complete on-board electronics for UV and temperature
• Absolute and percent UV readout options
• Detector Cable: Water-resistant axial connector and cabling
• No diffuser, therefore no UV solarization
• Temperature sensor and controller does not require calibration
• Detector can be used for UV Monitoring Station and Aqualogic 2000™ system.
Siemens
Water Technologies
BACK
209
Replacement UV Monitoring System
Kits for Aquafine® Series UV Sterilizers
Ordering Information for Kits.
Remote UV Monitoring System
This kit is intended as a remote self-contained, wall or cabinet mounted,
monitoring station and detector for use with any Aquafine units.
Standard Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NIST Traceable Kit . . . . . . . . . . . . . . . . . . . . . . . .
ZCSPM41628
ZCSPM416281
CSL Monitoring System
This kit is intended to upgrade existing CSL units with the new monitoring station
and detector.*
Standard Remote Integrated Kit . . . . . . . . . . . . . . ZCSPM41550
NIST Traceable Remote Integrated Kit . . . . . . . . . ZCSPM415501
*Note: Dual Chamber units require two kits
Spare Parts
Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NIST Traceable Detector . . . . . . . . . . . . . . . . . . . . . . . .
Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPVC Compression nut . . . . . . . . . . . . . . . . . . . . . . . . .
SS Compression Nut . . . . . . . . . . . . . . . . . . . . . . . . . . .
O-Ring (Viton®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZCSPM41174
ZCSPM411741
ZCSPM41116
ZCSPM4252
ZCSPM40317
ZCSPM40432
Siemens
Water Technologies
BACK
210
Ultraviolet Light Traps
Non-metallic piping systems that employ ultraviolet (UV) sterilization are susceptible to
photochemical degradation. These piping systems must be protected from the effects of
ultraviolet light emitted by the UV unit through the use of “UV Light Traps.” This line of
light traps has been developed to provide that protection; traps should be installed at
the inlet and outlet of the UV sterilization unit prior to connecting the unit to any nonmetallic piping material. All traps in this product line are constructed of 316L stainless
steel, OD tube size, and are shipped complete with gasket (flange or sanitary) and
hardware (flange bolts and/or sanitary clamp) as applicable.
• Each trap is ordered separately permitting greater flexibility in selecting end
connection configurations
• Pre-fabricated traps ship complete with all gaskets and hardware appropriate for
the end connections selected
• Sizing flexibility ranges from 1/2" flange or ferrule through 4" flange or ferrule
SPECIFICATIONS
“S” Shaped Traps . . . . . . . . . . .
SLT
TTE
YLT
430
“Y” Shaped Traps . . . . . . . . . . .
YLT
FFM - Flange x Flange - Mill Finish
FFE - Flange x Flange - Electropolished
FTE - Flange x Sanitary - Electropolished
TTE - Sanitary x Sanitary - Electropolished
TC
05 - 1/2" Flange / Ferrule
(flange ring not available)
10 - 1" Flange Ring / Ferrule
End Connection. . . . . . . . . . . . . . . . . . . . . .
15 - 1-1/2" Flange Ring / Ferrule
XX - No port for resistivity element
HC - 3/4" Half Coupling (threaded
Connection Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 4" Flange Ring / Ferrule
resistivity element (FF connections only)
Re Port Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TC - 1-1/2" Ferrule (sanitary resistivity
element) used for 2" tube
TC - 2" Ferrule (sanitary resistivity element)
used for 3" and 4" tube
SPECIFICATIONS
SLT
20
325 - 3" Flanged UV connections, 2.5" flanged common inlet / outlet
330 - 3" Flanged UV connections, 3" flanged common inlet / outlet
430 - 4" Flanged UV connections, 3" flanged common inlet / outlet
End Connection. . . . . . . . . . . . . . . . . . . . . . 440 - 4" Flanged UV connections, 4" flanged common inlet / outlet
Connection Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V
V - Vertical inlet / outlet
H - Horizontal inlet / outlet
Siemens
Water Technologies
BACK
211
VALVES
Blend Valves
Water Temperature Blend Valves are designed to temper the inlet water to a water
purification system, to optimize the water system’s performance. The valve is supplied
with a temperature controller (blend valve), brass nipple and brass cross fittings, and
inline dial thermometer.
• Controls temperatures from 20°C to 45°C, with an optimum temperature of 25°C.
Temperature setting is field-adjusted upon installation.
• Thermostatic controller constructed of rough brass, chrome-plated, with an integral
stop check strainer, and removable thermostatic cartridge for ease of maintenance.
Control knob is constructed of stainless steel.
• Wall mounting bracket is optional
Catalog Number
ZR2523001
Type . . . . . . . . . . . . . . . . . . . . . .
Flow range . . . . . . . . . . . . . . . . .
Pressure drop . . . . . . . . . . . . . .
Inlet size. . . . . . . . . . . . . . . . . . .
Outlet size . . . . . . . . . . . . . . . . .
System Dimensions
L x W x D (inches) . . . . . . . . . . .
Shipping Weight
lbs. . . . . . . . . . . . . . . . . . . . . . . .
Optional Mounting
Bracket (Catalog Number)
ZR2523002
ZR2523003
ZR2523004
ZR2523005
ZR2523006
5-200-1
4–5
5–10
3/4"
3/4"
5-400-1
6–10
6–10
3/4"
1"
5-200
10–18
7–18
3/4"
3/4"
5-400
19–30
5–13
3/4"
1"
5-700
31–45
5–10
11⁄4"
11⁄2"
5-900
45–60
5–12
11⁄2"
11⁄2"
11x6x73⁄4
11x61⁄4x8
11x6x73⁄4
11x61⁄4x8
12x61⁄2x101⁄8
13x7x121⁄2
10
14
10
14
18
27
ZR2523008
ZR2523008
ZR2523008
ZR2523008
ZR2523008
ZR2523009
Pressure Relief Valves
Siemens pressure relief valves are designed to prevent over pressures, maintain back pressures or act as an automatic by-pass in
vessels and piping. The pressure relief valves can handle corrosive and ultra-pure liquids with inlet pressures up to 100 psi. The
pressure relief valves are designed to activate at the desired set point, and contain a Teflon shaft for non-sticking operation.
Catalog Number . . . . . . . . . . VALRVT050VPV ZIVC00141
Body Type . . . . . . . . . . . . . . . . . .
O-ring . . . . . . . . . . . . . . . . . . . . . .
Capacity . . . . . . . . . . . . . . . . . . . .
Connection . . . . . . . . . . . . . . . . .
Catalog Number . . . . . . . . . .
Body Type . . . . . . . . . . . . . . . . . .
O-ring . . . . . . . . . . . . . . . . . . . . . .
Capacity . . . . . . . . . . . . . . . . . . . .
Connection . . . . . . . . . . . . . . . . .
ZIVC00142
VALRVT125VPV ZIVC00143 VALRVT200VPV
PVC
Viton®
4 gpm
1/2"
PVC
Viton®
8 gpm
3/4"
PVC
Viton®
15 gpm
1"
PVC
Viton®
25 gpm
11⁄4"
PVC
Viton®
50gpm
11⁄2"
Polypro
Viton®
4 gpm
1/2"
Polypro
Viton®
8 gpm
3/4"
Polypro
Viton®
15 gpm
1"
Polypro
Viton®
50 gpm
11⁄2"
Polypro
Viton®
80gpm
2"
PVC
Viton®
80gpm
2"
VALRVT050VPP VALRVT075VPP VALRVT100VPP VALRVT150VPP VALRVT200VPP
Siemens
Water Technologies
BACK
212
WASTEWATER
Wastewater Capabilities
As the world’s leading provider of industrial and municipal wastewater treatment,
Siemens offers the most comprehensive solutions to our customers’ wastewater
treatment problems. From groundwater or landfill leachate treatment, to
municipal wastewater or zero-discharge facilities, Siemens offers a total solutions
approach to wastewater treatment, recovery and reuse. We have the widest
range of technologies, products and services to help you minimize operating
costs, maximize resources and meet discharge requirements.
Siemens provides a complete range of technologies and services for wastewater
treatment industry, from pretreatment to effluent discharge and residuals
management:
Preliminary Treatment/Pre-treatment
Intake systems, screens and rakes
Grit removal
Pumps
Flow equalization
Aeration
Odor control
Media filtration
Clarification
pH adjustment
Oil/Water Separation
API separators
Plate separators
Hydrocyclone separators
DAF/DGD Separators
IAF/IGD Separators
Skimmers
Walnut shell filters
Chemical Precipitation/Neutralization
Chemical feed systems
Bulk chemical handling
Lime slakers
Batch and continuous precipitation
units
Membrane systems
Clarification
Clarifiers
High rate clarification
Plate separators
Skimmers
Flotation systems
Sludge collectors
Adsorption clarifier-filter systems
Residuals Management
Spent caustic, spent acid and
organic
waste management
Spent catalyst recovery
Biological Treatment
Sequencing batch reactors
Select or plug flow reactors
Multi-channel and single-channel
oxidation ditches
Surface aerators
Jet aerators
Fine and coarse bubble aeration
Mixers
Anaerobic
RBCs/SBCs
MBR (Membrane Bioreactor)
MBBR (Moving Bed Biofilm Reactor)
Trickling filters
Activated sludge systems and
package plants
Biological aerator filters
Biotowers
Powdered activated carbon systems
GAC fluid beds
Media
Advanced fluidized composting
Biological nutrient removal
Monitoring and control
Filtration/Polishing
Conventional shallow and deep bed
filters
Upflow filters
Pulsed bed filters
Siemens
Water Technologies
BACK
213
WASTEWATER
Wastewater Capabilities
Traveling bridge filters
Multimedia filters
GAC fluid beds
Membrane filtration
Reverse osmosis
Activated carbon
Pressure filters
Filter underdrains
Micro-screens
Solids Handling
Gravity thickeners
Aerobic and anaerobic digestion
Belt filter presses
Filter presses
Pasteurization
Sludge dryers
Composting
Wet air regeneration
Incineration
Sludge conveyance systems
Groundwater, Soil Remediation/
Leachate Treatment
Media filters
Biological treatment
Clarification
Metals removal systems
Solids handling systems
Activated carbon systems
In-process Treatment
Wet air oxidation
Metals removal
Coker clarifiers
Desalter oil/water separators
Selenium removal
Evaporation/crystallization
Ion exchange
UV oxidation
Strippers
Carbon adsorption
Chemical recovery systems
Water reuse systems
Energy recovery systems
Ion exchange
Air/VOC/SO2 Treatment & Recovery
Odor control
Sulfur recovery
H2S removal
Activated carbon adsorbers
Emergency vapor scrubbers
VOC/odor containment covers
Gas collection and incineration
Support Services
Laboratory analysis
Treatability and pilot plant studies
Startup and personnel training
Preventative maintenance contracts
Rehabilitation and retrofits
Service contracts
Outsourcing
Design-build-own-operate
Financing, leasing
Centralized treatment
Resource recovery
For Additional Information on
Our Wastewater Capabilities Contact:
Siemens Water Technologies
181 Thorn Hill Road
Warrendale, PA 15086
toll free 800.525.0658
telephone 724.772.1402
fax 724.772.1300
e-mail
information.water@siemens.com
Resource Recovery
Oil, glycol recovery systems
Metal recovery systems
Activated carbon recycling and
reactivation
Siemens
Water Technologies
BACK
This page intentionally left blank
BACK
215
Support Services
TA B L E O F
CONTENTS
ACTIVATED CARBON TURNKEY SERVICES
Adsorber Exchange Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
Analytical Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
Carbon Changeout Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
Reactivation and Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
ENVIRONMENTAL SERVICES
Groundwater Remediation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
Hazardous Waste Treatment and Recovery . . . . . . . . . . . . . . . . . . . . . .217
Hydrocarbon Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218
Wastewater Ion Exchange Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218
ION EXCHANGE RESIN TURNKEY SERVICES
Replacement Resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
Resin Cleaning and Reconditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
Resin Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
Resin Transportation (Bulk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Turnkey Removal and Replacement Services . . . . . . . . . . . . . . . . . . . .220
MAINTENANCE AND OPERATING SERVICES
Build-Own-Operate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Service Contracts and Preventative Maintenance . . . . . . . . . . . . . . . . .221
Start-Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Temporary Water Treatment Systems . . . . . . . . . . . . . . . . . . . . . . . . . .222
RO MEMBRANE TURNKEY SERVICES
Membrane Care ProgramSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
Analytical Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
Off-Site Membrane Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
Replacement Membranes and Components . . . . . . . . . . . . . . . . . . . . .223
Chemical Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
SPARE AND MANUFACTURERS’ ORIGINAL PARTS
Spare Parts, Expendables and Consumables . . . . . . . . . . . . . . . . . . . .224
Replacement Filtration Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
Manufacturers’ Original Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
Replacement Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
Water & Wastewater Data Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
TECHNICAL SERVICES
Analytical Water Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226
Application Engineering & Custom System Design . . . . . . . . . . . . . . . .226
Audits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226
Pilot Studies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226
Project Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227
System Optimization Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227
NovaSys – Mechanical Upgrade Program . . . . . . . . . . . . . . . . . . . . . . .228
Documentation and Validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229
BACK
216
SUPPORT SERVICES
Activated Carbon Turnkey Services
Siemens Water Technologies is the single source for all your Granular Activated Carbon
needs. Our complete line of equipment and Westates® activated carbon products provides
the right solution for all your applications, whether industrial, municipal or environmental.
We offer turnkey Services to ensure that your equipment continues to operate reliably and
economically, while meeting regulatory requirements. From process evaluation and
modeling through design, fabrication and installation, to custom on-site service, Siemens has
the financial stability and programs to manage your long-term risk.
ADSORBER EXCHANGE PROGRAM
Offers a simple and cost effective way to handle your removable adsorber equipment tanks.
When the adsorber has reached the end of its useful life and the activated carbon inside is
“spent”, a local Siemens Water Technologies technician delivers fresh carbon tanks to your
site. We can assist with the spent carbon profiling and acceptance procedures necessary for
timely removal and reactivation of your spent carbon. After our environmental department
approves the profile, we work with you to arrange for pick-up of the spent adsorber(s) and
transport to our reactivation facility.
ANALYTICAL TESTING
Siemens operates a fully equipped carbon testing laboratory that uses ASTM, AWWA and
internally developed standard test methods to fully characterize virgin and spent activated
carbons. Our laboratory has been certified as an environmental testing laboratory
approved for testing hazardous solid wastes for ignitability, corrosivity, toxicity
characteristics leaching procedures (TCLP), inorganic metals and organics in accordance
with appropriate EPA methods. Wastewater fields of testing include inorganic metals and
organics in accordance with EPA methods.
CARBON CHANGEOUT SERVICES
For systems that are permanent and hard-piped, Siemens offers turnkey carbon changeout
services. Our service crew mobilizes on site to remove, package and label the spent carbon in
Department of Transportation (D.O.T) approved containers. After removal, inspection of the
vessel interior and internal distributors is conducted and minor repairs are made if necessary.
The adsorber is refilled with fresh activated carbon and the spent carbon is transported to our
RCRA-permitted reactivation facility.
REACTIVATION AND RECYCLING
Siemens offers the most environmentally sound alternative to disposing of spent
carbon in landfills. Our RCRA-permitted reactivation facility recycles used carbon
by processing it through a furnace system, removing and destroying inorganic
impurities. The recycled carbon exits the reactivation units, is cooled, tested for
quality assurance and packaged for reuse. Lot numbers, sampled and analyzed in
accordance with Siemens' QA/QC program, identifies the reactivated carbon. The
entire state-of-the-art process is computer controlled and monitored, ensuring the
facility meets or exceeds federal and state regulatory requirements for air and
water discharges. A Certificate of Reactivation can be issued for each shipment of
recycled carbon. This certifies that the spent carbon has been recycled in a manner
that meets or exceeds all applicable RCRA and Benzene NESHAP regulations.
Other turnkey services include:
• Design/Engineering
• Fabrication/Installation – Lic. Contractor
• Mobilization/Removal of Equipment
• Dedicated Potable Water Vehicles
• Carbon Canister Monitoring
• Benzene NESHAPS Monitoring
• Transportation
Siemens
Water Technologies
BACK
217
SUPPORT SERVICES
Environmental Services
GROUNDWATER REMEDIATION SERVICES
Water is our planet’s most valuable natural resource. Faced with the challenges of
increasing populations, more stringent government standards and more complex
treatment solutions, many municipalities and industries alike are faced with the growing
challenge of properly treating their contaminated wells, runoff and other groundwater
supplies. Siemens Water Technologies provides the technical know-how and has the costeffective solutions to make treating contaminated waters – whether destined for potable
drinking water or non-potable discharge – simplified.
Siemens Environmental Services include reliable solutions for dealing with your most
difficult contaminated waters issues. Our products and systems are based on the Best
Available Technology (BAT) for treating a broad range of contaminants, including:
• Arsenic
• Chrome, Hexavalent chrome
• Iron
• Manganese
• MTBE (Methyl tertiary-butyl ether)
• Nitrates
• Perchlorate
• Radionuclides
• TCE (Trichloroethylene)
• VOC (Volatile organic compounds)
HAZARDOUS WASTE TREATMENT AND RECOVERY
Siemens operates two, fully-permitted facilities with federal RCRA Part B and CERCLA
authority for the treatment and recovery of inorganic or trace organic waste. Wastes are
sent to the facilities in drums (of all sizes), portable totes, cubic yard bags or boxes and
tanker trucks. Virtually everything that we take into our facilities is in some way recycled.
Facilities located in Roseville, Minnesota and Los Angeles, California serve as regional
hubs for the treatment of hazardous wastewater and the recovery of reusable byproducts.
Core industries for this service include:
• Printed circuit board manufacturing
• Metal finishing
• Automotive
• Aerospace
• Semiconductor manufacturing
• Parts washing
• Groundwater cleanup
• Environmental Contractors
• General Industry
There are many other industrial wastes that may not be RCRA regulated, but still cannot
be discharged to sewer or local landfill. Boiler cleanout, low level metal rinsewaters, parts
washer effluent, bag house dust or ammonia water are just a few examples of the variety
of non-regulated wastes also processed by Siemens.
Our goal is to produce zero hazardous waste by extracting all reusable material, to
eliminate pollutants from the environment and avoid disposal costs and liability. Our
advanced processing techniques have allowed us to increase beneficial reuse rate of
these wastes to over 90% as reusable chemicals and metallic commodities.
Siemens
Water Technologies
BACK
218
SUPPORT SERVICES
Environmental Services
HYDROCARBON SERVICES
When waste generation can‘t be prevented, reuse and recycle are at the top of the
EPA’s waste management best practices list. How these materials are managed
matters to both the customer and Siemens. Our hydrocarbon services business
processes and recycles oily wastes and contaminated water from both commercial
and industrial customers. A broad range of treatment and recycling options help
simplify our customers’ waste management needs and at the same time ensures
complete environmental compliance and minimizes liability.
Services range from collection and recycling of used Glycol and antifreeze products,
used oil filters, and used oil to oil-water separation and cleaning to emergency
response and spill support. While our business is regional, we service all types of
customers along the Atlantic seaboard down through the Gulf Coast.
WASTEWATER ION EXCHANGE SERVICE
Wastewater Ion Exchange (WWIX) is a service-based treatment approach for heavy
metals control in dilute wastewater streams. We integrate equipment and service
option combinations to meet your discharge requirements, achieve the water quality
level needed for reuse while also minimizing your capital investment, reducing
overall space requirements and minimizing the liability associated with on-site
storage and handling of chemicals.
Our Wastewater Ion Exchange (WWIX) systems use specially selected resins and
medias to remove soluble heavy metals from various manufacturing processes,
cooling systems and contaminated groundwater. Each resin/media has a finite
capacity for metals removal. Once this capacity is reached, a Siemens field service
technician removes the exhausted tanks and replaces them with fresh tanks. The
exhausted resin/media is returned to our RCRA-permitted plant for regeneration and
reuse. The byproducts of these regeneration processes are further subjected to a
high temperature recovery process that captures the metals for reuse. All residuals
are captured as individual metals or sold as part of an iron-rich material used in the
production of Portland cement.
Siemens
Water Technologies
BACK
219
SUPPORT SERVICES
Ion Exchange Resin Turnkey Services
REPLACEMENT RESIN
Choose USF™ Ion Exchange Resin
As a leader in resin technology, we noticed a trend toward inconsistent performance
and quality of resins available in the marketplace. Because of the process guarantees
Siemens Water Technologies offers, we are able to produce resins that meet more
stringent, tighter resin performance specifications. Thus, USF™ ion exchange resin was
established to ensure our customers receive the highest quality product.
Advantages of Choosing USF™ Resin
•
We offer USF™ ion exchange resin at cost savings over equivalent products.
•
Our QA/QC program is ANSI N45.2, 10CFR50 Appendix B, and 10 CFR21
compliant to meet nuclear safety requirements.
•
We can provide process performance guarantees upon request.
•
Extensive technical support and resin application knowledge.
We provide Certificates of Analysis, Certificate of Conformance, and Shelf Life
statements upon request.
RESIN CLEANING AND RECONDITIONING
Siemens Water Technologies provides services for salvaging your fouled, crosscontaminated and/or exhausted resin. We can remove resins, transport them to our
local processing plant, convert the resins and return them to your facility. This extends
their useful life, minimizes costs and reduces system downtime. We can also do this on
a scheduled basis for condensate polishing or other water treatment applications. The
resin can be transported to and from the job site in our tanker trucks, 55 gallon drums,
lined fiber drums, or supersacks.
RESIN TESTING
To ensure optimum performance from your water treatment system, Siemens
recommends periodic testing of your ion exchange resin. Siemens' resin testing facility
can determine resin quality, diagnose operating problems and evaluate new ion
exchange products for conventional and special liquid processing applications. Our lab
can perform the following tests on your resin samples.
Standard laboratory resin testing
•
Capacity before/after clean up steps
•
Percent moisture
•
Particles size
•
Iron Fouling
•
Microscopic visual examination
Siemens
Water Technologies
BACK
220
SUPPORT SERVICES
Ion Exchange Resin Turnkey Services
Additional testing available
•
Percent conversion
•
Bead strength
•
Metallic impurities
•
Cross contamination
•
Kinetics (Mix Bed Test)
•
Kinetics (Mass Transfer)
•
TOC Extractables
•
16 hour soak
•
Dynamic
•
Organic Cl, SO4 Extractables
•
16 hour soak (UV)
•
Dynamic (UV)
•
Parr Bomb
•
Terminal Settling Velocity (TSV)
•
Super Fines (-60 mesh)
RESIN TRANSPORTATION (BULK)
Siemens offers bulk delivery and disposal of resin. We eliminate drum handling by
slurrying the resin directly from your water treatment service vessels to one of our
fleet of tanker trucks. Whether we’re delivering your own regenerated resin or
providing new resin, we greatly reduce the steps involved and the documentation
and administrative controls that go with temporary on-site and off-site disposal of
resin.
TURNKEY REMOVAL AND REPLACEMENT SERVICES
When it’s time to remove and replace your existing resin, consider Siemens to handle
your needs on a full turnkey basis. Siemens’ team of trained professionals will provide
complete project coordination, from predisposal testing through new resin
installation to used resin landfill disposal or investment recovery (used resin brokers).
We do it all. With complete responsibility in Siemens’ hands, you can be assured that
your project will be completed on schedule, within budget and most importantly, in
full compliance with all environmental regulations.
In addition to being the largest distributor of ion exchange resin, Siemens also
provides a full range of resin support services including laboratory testing, removal,
cleaning and resin re-conditioning for extended life. We offer special handling,
custom packaging or bulk delivery to meet your needs. If you are considering disposal
and investment recovery options, we have the expertise to help.
Siemens
Water Technologies
BACK
221
SUPPORT SERVICES
Maintenance and Operating Services
BUILD-OWN-OPERATE
Outsourcing water and wastewater treatment systems has been common over the
past 30 years. Because of the vast array of technologies and solutions available,
more and more companies are handing this operation over to Siemens Water
Technologies. We can provide and evaluate the right technological and economic
solutions, since our sole business is the operation of the entire treatment system.
This ensures the lowest total treatment cost while insuring maximum on-line
operation, guaranteed treated water quality, and the ability to quickly react to
unforeseen circumstances. This allows you to focus on your core competency –
making your product – while not using capital on projects that do not provide
revenue. Companies that rely on outsourced services, however, still maintain
strategic control of their operations, both now and in the future.
SERVICE CONTRACTS AND PREVENTATIVE MAINTENANCE
Siemens offers you peace of mind with our custom service contracts and
preventative maintenance agreements. Extended equipment life and efficient
operation are direct benefits of selecting Siemens to maintain your water treatment
equipment.
Our service contracts are custom tailored to help you get the most value from your
water treatment equipment investment. The Siemens Water Technologies service
template is customized for your equipment and operating parameters. If your
equipment is not operating in the normal range, our custom service template will
flag it immediately. A follow up letter is sent detailing the condition, corrective
action, maintenance requirements, and potential complications if the condition is
ignored. This system provides an expert evaluation of your equipment operation on
a regular basis.
In some cases you may chose to have Siemens perform the necessary maintenance
tasks to extend your equipment life. We offer custom preventative maintenance
services as part of our service contracts. We include services such as filter re-bedding,
ion exchange re-bedding, RO membrane cleaning, and parts replacement such as
pump seals, UV bulbs, and cartridge filters. A customized contract allows you to decide
the level and frequency of service that is best for your facility.
Our factory-trained service technicians are ready to serve you from over 80 offices
in North America. Our localized service allows us to schedule service and repairs
when you need them. Our local service structure allows us to have fast emergency
response and parts availability when you need it. Contact your local branch for a
service evaluation for your plant today.
START-UP SERVICE
Siemens can provide a team of process experts to assist with your system
installation and bringing your system on line. Our factory/field project team will
assist you with filling all tanks and equipment with production feedwater,
monitoring the process through several production cycles and show your
production personnel all the process adjustments needed to be sure you’re getting
the product water you expect.
Siemens
Water Technologies
BACK
222
SUPPORT SERVICES
Maintenance and Operating Services
We can also provide complete turnkey service. After defining your process
parameters, we will configure the most cost-efficient system, install the equipment,
fully test the process, train your personnel and provide guarantees regarding product
water. Many companies find this minimizes the demands on their own resources and
personnel.
TEMPORARY WATER TREATMENT SYSTEMS
For over 30 years, Siemens has met the short-term and emergency treated water
needs of our customers using our mobile water treatment systems.
Units may be installed in your plant and operated as stand-alone units or installed
inside a trailer and controlled by the system panel. Units can be combined with other
Siemens products to assemble fully integrated water treatment systems designed to
customers’ specific treated water quality and flow needs.
MOBILE SYSTEMS INCLUDE:
•
FlexRO® – Skid-mounted, self-contained, 100 gpm reverse osmosis units that
feature 3:2:1 (4M) array skids.
•
FlexTrex® – Skid-mounted ion exchange units that are designed to treat flows
ranging from 20 to 250 gpm per unit. Regenerated off-site, these portable units
do not use hazardous chemicals, do not generate wastewater and are ideal for
polishing raw or RO permeate water.
• PreFlex® – Units are modular in design, pre-plumbed, self-contained, skidmounted pretreatment units. They are designed to the highest engineering
standards with ASME code tanks, NEMA 4X panels and pneumatically actuated
solenoid valves enabling them to be used in a wide variety of applications and
environments including heavy industry.
• Mobile Clarifier Trailers – Self-contained, trailer-mounted system capable of
treating highly turbid water (>1000 NTU). The system is capable of producing
extraordinarily clear effluent (0.5-1.0 NTU) with remarkable stability under
varying raw water conditions. Flow rates to 1,050 gpm.
• Mobile Demineralizer (DI) Trailers – These trailers are the treatment of choice
for zero-discharge applications and seasonal treated water needs. With
regeneration facilities across the country and a large fleet of over 80 service
branches, Siemens can respond quickly to your emergency treated water needs.
•
Mobile RO (Reverse Osmosis) Trailers – Self-contained, trailer-mounted
systems that can be configured with combinations of 4 skid-mounted
FlexRO-100 units. Systems have flow rates up to 400 gpm per trailer.
TYPICAL USES:
•
Facility expansions
•
Pilot plant water needs
•
Interim use until a permanent system is installed
•
Process water/treated water quality changes
•
Environmental salt discharge problems
•
Emergency/scheduled shutdowns
•
Seasonal water needs
Siemens
Water Technologies
BACK
223
SUPPORT SERVICES
RO Membrane Turnkey Services
MEMBRANE CARESM PROGRAM
Our Membrane CareSM Program provides the services to keep your reverse osmosis (RO)
system operating at peak performance. In addition to our large inventory of
membranes and replacement parts, our trained service technicians can provide
assistance with membrane removal and installation or membrane cleaning, either onsite utilizing your clean-in-place skid or off-site at one of our regional cleaning facilities.
We offer membrane autopsies and complete laboratory services to evaluate system
performance and improve productivity.
ANALYTICAL SERVICES
Siemens’ analytical testing includes feedwater and outlet water analyses and various
membrane analytical techniques. Our Membrane Center of Excellence can provide
feed, concentrate and permeate water analyses, SDI pad analyses and various nondestructive and destructive tests. Membrane analysis assists in identifying the fouling
agent(s), proper cleaning techniques and proper pretreatment methods to prevent
recurring fouling.
OFF-SITE MEMBRANE CLEANING
Siemens’ off-site cleaning process is specifically designed to restore RO membranes to
or near the original manufacturer’s performance specifications. Our proprietary
equipment and strict cleaning process are tightly controlled to ensure optimum
cleaning performance, resulting in longer intervals between cleanings and/or
replacement. The cleaning process does not affect the structural integrity of the
membrane and, therefore, does not void the manufacturer’s warranty. Siemens Water
Technologies offers three levels of off-site cleaning service for your 4” and 8” elements.
REPLACEMENT MEMBRANES AND COMPONENTS
Siemens is your leading source for replacement membranes. We supply elements from all
of the major manufacturers. For your convenience, we inventory FILMTEC™ and
Hydranautics® membranes at our seven regional distribution facilities. This enables us to
meet short lead times and thereby minimize your system’s downtime. In addition, our
regional distribution facilities also stock major components, such as replacement gauges,
pumps and end caps.
CLEANING CHEMICALS
Siemens can determine the source of your membrane fouling problem and make
recommendations on the selection and purchase of proper chemical treatments and, if
necessary, appropriate pretreatment steps. Our broad membrane system expertise enables
us to provide reliable diagnosis methods and sound troubleshooting to return your
equipment to optimum performance. We work with all the RO chemical manufacturers and
provide you with the best combination of RO antiscalants, chemical feed systems and
dosing rates to keep your RO system running smoothly.
Siemens
Water Technologies
BACK
224
SUPPORT SERVICES
Spare and Manufacturers’ Original Parts
SPARE PARTS, EXPENDABLES & CONSUMABLES
(Filter Cartridges, UV Bulbs, Gaskets, Nuts, Bolts, Piping)
We have the largest inventory of spare and replacement parts in the industry. If you
need filter elements, UV components, replacement gauges or controls, we stock these
as well as other parts. We supply both industrial grade products and validated
pharmaceutical bacteria-removal cartridges.
We have filter housings for every purpose, from simple plastic construction to an
electro-polished, sanitary pharmaceutical design. Our complete line of sterilizers
deliver flows of 1 gpm to 1,000 gpm. These systems can be designed to reduce
bacterial contamination and destroy TOC (total organic carbon) materials in the supply
water.
We also provide replacement and spare parts for your ancillary system components,
such as pumps, valves and gaskets. Whether it involves normal wear-and-tear
replacement, maintenance or spares inventory, we will help ensure your water
treatment systems operate efficiently with minimal downtime.
REPLACEMENT FILTRATION MEDIA
We offer a wide variety of filtration medias and underbedding materials for every
filtration application. These include sand, garnet, gravel, anthracite or quartz materials
screened to the specific mesh sizes required. We also offer media removal, vessel and
distribution inspection, installation of the new media plus disposal of the spent media
if required.
MANUFACTURERS’ ORIGINAL PARTS
We provide components for equipment names you are familiar with in the Siemens
family, including Illinois Water Treatment (IWT®), Permutit®, L*A Water, Kisco™,
Ionpure® and Polymetrics™, to name a few. From vessel replacements to internals and
Permutit multiport valves, Siemens is the only company that can ensure the parts you
buy are designed and engineered to fit your original equipment. Our library of original
installation drawings ensures all replacement components are completely compatible
with existing systems.
CALL THE NUMBER BELOW TO ORDER PARTS FOR EQUIPMENT MADE BY THESE SIEMENS
COMPANIES.
Arrowhead® Industrial Water
1-800-875-7873 ext. 5000
Continental®
1-800-875-7873 ext. 5000
Interlake
1-800-875-7873 ext. 5000
Ionpure®
1-800-875-7873 ext. 5000
IWT® (Illinois Water Treatment)
1-800-582-5261
Kisco™
1-800-582-5261
L*A Water
1-800-582-5261
Mitco
1-800-875-7873 ext. 5000
Penfield®
1-800-875-7873 ext. 5000
Permutit®
1-800-631-0878 ext. 107, 108
Polymetrics™
1-800-875-7873 ext. 5000
Water Services of America
1-800-875-7873 ext. 5000
Siemens
Water Technologies
BACK
225
SUPPORT SERVICES
Manufacturers’ Original Parts
MANUFACTURERS’ ORIGINAL PARTS
SPECIALIZED OR PROPRIETARY ITEMS
REPLACEMENT TANKS (PRESSURIZED AND ATMOSPHERIC)
VESSEL REPAIRS AND UPGRADES
Whether it is a system supplied by Siemens, a legacy company or any/all other water
treatment manufacturers, we can assist you with specialized or proprietary items
including:
• Rupture disks
• Bushings
• Shafts
• Chevron tube settlers
• Sampling devices/sinks
• Desiccant breathers/fume vents –
• Sight windows
including designs using dyed resins
• Socket agitator arms
• Distribution systems – complete
• Strainers and strainer baskets –
systems or individual components
conventional, dual velocity, specialty,
• Face piping
underdrain, etc. – including
• Gauge glasses
polystyrene, PVC and stainless steel
• Inlet diffusers
construction
• Level switches
• Thermometers
• Nozzles – conventional, dual velocity,
• Vacuum breakers
spray, etc.
• Valve inspection and repair
• Overflow controls/traps
• Valve retrofits – manual to automatic
• Packing for deaerating heaters,
• Valves, maintenance kits and parts –
decarbonators, degasifiers, etc.
inlet, control, pressure relief, spray,
• Pillow blocks
multiport, etc.
• Pressure gauges
• Vent condensers
• Rotary surface washers
Some of the tanks, vessels and vessel repairs that we can provide:
• ASME code and non-code designs
• Chemical regeneration tanks (acid,
caustic and brine)
• Custom designed tanks
• Double dish design
• Exact replacements
• Fiberglass tanks
• Flat false bottom vessels
• Replacement tanks for neutralization
systems
• Replacing tank liners on-site
• Spray lined and rubber lined vessels –
including FDA compliant linings
• Storage tanks
For additional information, call 800.582.5261 ext. 378.
PERMUTIT® WATER AND WASTEWATER TREATMENT DATA BOOK
As advertised for years by Permutit, “We wrote the book on water treatment”. The
latest edition of this popular, 166-page engineering data book contains charts, graphs
and illustrations for general water data, pipes and fittings, chemical properties and
data, and waste treatment information. The book is a useful tool for all individuals
involved in the design of water and wastewater treatment systems, pollution control
and water recovery and reuse. To order copies or for additional information, contact
1-800-631-0878, ext. 107, 108.
Siemens
Water Technologies
BACK
226
SUPPORT SERVICES
Technical Services
ANALYTICAL WATER TESTING
Before you can select the right combination of technologies to deliver the level of
water quality that you need, it is essential to know exactly what is in your water.
Siemens' analytical testing laboratory offers complete testing services to determine
the most appropriate system components to meet each customer’s particular
application needs. The water analysis and research and development laboratories
conduct a wide range of tests designed to accommodate the analysis of water for
all applications, including pharmaceuticals, high-purity water, hemodialysis,
laboratory, pretreatment and troubleshooting. The laboratory has the capacity to
perform inorganic analysis and TOC testing. We offer postage-paid water analysis
test kits designed to address a variety of field requirements. Once a test kit is
returned to the lab, we tailor the testing and reporting to meet specific customer
requirements. Comprehensive reports are generated and the laboratory maintains
an extensive database.
APPLICATION ENGINEERING & CUSTOM SYSTEM DESIGN
Siemens offers customized water treatment systems in addition to standard, preengineered products. The scope of our involvement in a project is determined by
the needs of the customer, the types of technologies being evaluated and the
complexity of the treatment solution being considered. Designers, drafters and
engineers in our CAD/CAE (computer-aided design/computer-aided engineering)
group work together with manufacturing, R&D and sales personnel to develop
equipment and system designs for a broad scope of treatment needs. They have
extensive experience in process water filtration and CAD/CAE, with specific
expertise in piping design, process instrumentation, steel weldment fabrication,
tooling, electrical design, panel layout and programming. When you need a
continuous supply of high-purity water for your critical application, consult with our
water treatment experts to determine the most effective and efficient system to
continuously and consistently meet those needs.
AUDITS
One of the many services Siemens offers to help customers manage their water and
wastewater treatment are plant audits. These completely confidential audits,
conducted by our specially trained audit teams, help customers solve a specific
problem or improve their plant operations.
PILOT STUDIES
We offer process water and wastewater treatment pilot systems representing
various technologies so you can test the technology on your application before you
buy. Among our pilot plant capabilities is the industry’s most complete test facility
for biological processes and aeration, the world’s only complete wet air oxidation
plant and equipment for testing dewatering processes, pumping and filtrations.
Many of our pilot facilities are trailer or skid-mounted, so you can test various
processes on your wastewater at your site – under operating conditions.
Siemens
Water Technologies
BACK
227
SUPPORT SERVICES
Technical Services
PROJECT MANAGEMENT
Each water or wastewater treatment system we manufacture and install is project
managed by an expert focused on the needs of your industry. From initial problem
analysis to system start-up, we’ll work with your team to ensure a successful treatment
project that meets your requirements. Our biopharmaceutical design/build and program
management group offers design/build capabilities; pre-engineered/modular constructed
equipment and process systems (skid) applications. We also offer turnkey project
management.
SYSTEM OPTIMIZATION PROGRAM
For existing water treatment systems that are not operating at optimum efficiency,
Siemens offers the System Optimization Program to enhance system performance. The
program is offered through Siemens' Engineered Parts and Services (EP&S) group.
Through the program, an EP&S Technical Services Engineer will:
• Travel to the site.
• Conduct a comprehensive review of the water treatment system and ancillary
equipment.
• Meet with operating personnel to determine current maintenance procedures and
operating conditions.
• Review operating data and sequences, drawings and operating and maintenance
manuals.
• Provide a detailed engineering report, including observations and recommendations.
Services are available on a per diem basis and can include engineering consulting, process
troubleshooting, equipment evaluation and optimization and an optional Process
Optimization Modeling Report. Using Siemens' WinCPD® proprietary computer simulation
program, a Process Optimization Modeling Report will be generated. Allowing a multitude
of variables withing the water treatment system to be analyzed, the WinCPD® program wil
them model the most effective operating parameters for the system. The program
includes water treatment systems supplied through Siemens' family of companies
including systems previously supplied by:
•
•
•
•
•
•
Continental® Water Systems Corporation
Himsley Engineering Ltd./Himsley International
Interlake Water Systems Company
Ionpure®
Illinois Water Treatment (IWT®)
Kisco®
•
•
•
•
•
•
L*A Water
Mitco
Penfield®
Permutit®
Polymetrics®
Water Services of America
We are also well qualified to perform evaluations on water treatment systems supplied by
all other manufacturers. For additional information, call 800.582.5261 ext. 342 or 340.
Siemens
Water Technologies
BACK
228
SUPPORT SERVICES
Technical Services
NOVASYS – MECHANICAL UPGRADE PROGRAM
After years of usage, a water treatment system may be showing signs of
deterioration. The vessel or piping may be corroded or leaking or various
components may not be functioning properly. In other instances, the technology
may have changed offering better efficiencies.
Through NovaSys, one of our inspectors will travel to the site, perform a thorough
system analysis and submit a detailed list of recommendations. Suggestions for
alternative materials of construction and/or designs will be included within the
recommendations to reduce costs and improve safety and operating efficiencies.
As part of the program, we can replace worn or outdated:
• Tanks (repairs are also available)
• Piping manifolds
• Internals and other distribution systems
• Valves, strainers, pumps and other components
• Resins and other media
We will also offer recommendations for upgrading the system. Typical NovaSys
upgrades that we supply include:
• Changing conventional downflow softeners and two bed deionizers (also called
separate beds) into highly efficient packed bed systems
• Upgrading internal tank distribution systems for greater reliability
• Using Siemens' patented Heat Optimized Technology (HOT Series) to transform
typical carbon towers into hot water sanitizable carbon filters to control effluent
biological growth
• Upgrading regeneration chemical skids (pumped or educted systems) for
improved performance
Some of the advantages of Siemens' NovaSys Mechanical Upgrade Program include:
• Improves safety by minimizing burst and leak risks
• Eliminates downtime for increased productivity
• Provides consistent water quantity and quality
• Saves costs because less chemicals are consumed
• Improves pump performance for better chemical utilization
• Corrects dosages and flow rates for improved regeneration times
• Reduces maintenance labor and parts
• Reduces utility costs through reduced water usage
For additional information, call 800.582.5261 ext. 340.
Siemens
Water Technologies
BACK
229
SUPPORT SERVICES
Technical Services
DOCUMENTATION AND VALIDATION
Siemens understands that process validation of the entire water treatment system is
an important concern, and often a hidden cost, to our pharmaceutical customers.
That’s why we offer systems that are designed with validation in mind. These systems
incorporate proven equipment components and instrumentation that makes date
monitoring more convenient for systems operators. We regularly install programmable
logic control (PLS) validated systems that continuously and automatically monitor and
record critical parameters. We offer a full range of validation support documents with
our pharmaceutical and biotechnology system designs. We also provide copies of our
documented, established quality control procedures for hemodialysis reverse osmosis
water systems and hemodialysis resin regeneration centers.
Siemens
Water Technologies
BACK
BACK
231
Water Quality Standards, Constants,
Conversions
& Physical Data
TA B L E O F
CONTENTS
REFERENCE INFORMATION TABLES
Conductivity and Resistivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
ASTM Reagent Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Clinical Laboratory Standards Institute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
USP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
AAMI Hemodialysis Water Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
U.S. Boiler Feedwater Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Langelier Saturation Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Calcium Carbonate Equivalents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Equivalents of
Liquid Measures and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Pressure and Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Centigrade (°C) to Fahrenheit (°F). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Tank Areas and Volumes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
A Key to Relative Particle Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Velocity of Liquids in Pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
BACK
Siemens
Water Technologies
BACK
233
REFERENCE TABLES
Conductivity and Resistivity
(CaCO3 solutions at 25°C)
Conductivity
(micromhos-cm)
Resistivity
(ohms-cm)
0.056
0.059
0.063
0.067
0.072
0.077
0.084
0.091
0.100
0.111
0.125
0.143
0.167
0.200
0.250
0.333
0.500
1.00
1.11
1.25
1.43
1.67
2.00
2.50
3.33
5.00
10.0
11.1
12.5
14.3
16.7
20.0
25.0
33.0
50.0
100.0
111.0
125.0
143.0
167.0
200.0
250.0
333.0
500.0
1000.0
Resistivity/Conductivity
ohm-cm =
___1_____
mho/cm
18,000,000
17,000,000
16,000,000
15,000,000
14,000,000
13,000,000
12,000,000
11,000,000
10,000,000
9,000,000
8,000,000
7,000,000
6,000,000
5,000,000
4,000,000
3,000,000
2,000,000
1,000,000
900,000
800,000
700,000
600,000
500,000
400,000
300,000
200,000
100,000
90,000
80,000
70,000
60,000
50,000
40,000
30,000
20.000
10,000
9,000
8,000
7,000
6,000
5,000
4,000
3,000
2,000
1,000
=
_____1____
Siemens/cm
Dissolved Solids
(parts per million)
(as CaCO3)
0.0277
0.0294
0.0313
0.0333
0.0357
0.0384
0.0417
0.0455
0.0500
0.0556
0.0625
0.0714
0.0833
0.100
0.125
0.167
0.250
0.500
0.556
0.625
0.714
0.833
1.00
1.25
1.67
2.50
5.00
5.56
6.25
7.14
8.33
10.0
12.5
16.7
25.0
50.0
55.6
62.5
71.4
83.3
100.0
125.0
167.0
250.0
500.0
Conversions
Grains/Gallon
(as CaCO3)
0.00164
0.00170
0.00181
0.00193
0.00211
0.00222
0.00240
0.00263
0.00292
0.00322
0.00368
0.00415
0.00485
0.00585
0.00731
0.00971
0.0146
0.0292
0.0322
0.0368
0.0415
0.0485
0.0585
0.0731
0.0971
0.146
0.292
0.322
0.368
0.415
0.485
0.585
0.731
0.971
1.46
3.22
3.22
3.68
4.15
4.85
5.85
7.31
9.71
14.6
29.2
Total Dissolved Solids
1 grain per gallon = 17.1 parts per million (ppm)
1 part per million = 1 milligram per liter (mg/l)
Siemens
Water Technologies
BACK
234
REFERENCE TABLES
ASTM® Reagent Water Specifications
CLSI® (formerly NCCLS) Reagent Water
Specifications
USP® 30 Pharmaceutical Grade Water Standard
AMERICAN SOCIETY FOR TESTING AND MATERIALS
Standard Specifications for Reagent Water
ASTM Type
I
Conductivity @ 25°C (micromhos/cm) . . . . . . . . . .
Resistivity @ 25°C (Megohms-cm). . . . . . . . . . . . .
Total Silica (µg/L) . . . . . . . . . . . . . . . . . . . . . . . . . .
Total Organic Carbon (µg/L) . . . . . . . . . . . . . . . . . .
Chlorides (µg/L) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sodium (µg/L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pH* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.056 . . . . . .
18 . . . . . . . . .
3 .........
100 . . . . . . . . .
1 .........
1 .........
– .........
Max Heterotropic Bacteria Count . . . . . . . . . . . . . .
Endotoxin, EU/mL . . . . . . . . . . . . . . . . . . . . . . . . . .
10/1000 mL. . .
< 0.03 . . . . . . .
II
1.0 . . . . . . .
1.0 . . . . . . .
3. . . . . . . . .
50. . . . . . . . .
5. . . . . . . . .
5. . . . . . . . .
–. . . . . . . . .
Type A
Type B
10/100 mL . . .
0.25 . . . . . . . .
III
0.25 . . . . . . . .
4.0 . . . . . . . . .
500 . . . . . . . . . .
200 . . . . . . . . . .
10 . . . . . . . . . .
10 . . . . . . . . . .
– ..........
IV
5.0
0.2
–
–
50
50
5.0-8.0
Type C
100/10 mL
N/A
*The measurement of pH in Type I, II, and III reagent water has been eliminated because these grades of water do not
contain constituents in sufficient quantity to alter pH.
CLSI
(CLINICAL LABORATORY STANDARDS INSTITUTE)*
Clinical Laboratory Reagent Water (CLRW)
CLSI
Resistivity @ 25°C . . . . . . . . . . . . . . . . . . . . . . . . .
(megohms-cm)
Conductivity @ 25°C . . . . . . . . . . . . . . . . . . . . . . .
(micromhos/cm)
Bacterial Growth (cfu/mL) . . . . . . . . . . . . . . . . . . . .
Organics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Particulate Matter . . . . . . . . . . . . . . . . . . . . . . . . . .
a
10
0.1
10
a
<500 ppb
a
0.22 µm Filter
This specification is a process specification, and not measured by the end-user.
*Formerly NCCLS (National Committee for Clinical Laboratory Standards).
UNITED STATES PHARMACOPOEIA 30 STANDARDS
USP 30 Pharmaceutical Grade Water
Organics . . . . . . . . . . . . . . . . . . . . . . . . . .
<0.5 ppm TOC
Endotoxin by LAL
Purified Water . . . . . . . . . . . . . . . . . . . .
WFI . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No specification
<0.25 EU/mL
Conductivity . . . . . . . . . . . . . . . . . . . . . . .
Bacteria (guideline only)
Purified Water . . . . . . . . . . . . . . . . . . . .
WFI . . . . . . . . . . . . . . . . . . . . . . . . . . . .
<1.3 µS/cm at 25°C in-line measurement**
<100 cfu/mL
<10 cfu/100 mL
**from equivalent values from USP Table for Conductivity Limits as a Function of Temperature.
Siemens
Water Technologies
BACK
235
REFERENCE TABLES
Association for the Advancement of
Medical Instrumentation(AAMI)
Hemodialysis Water Quality
Maximum allowable chemical contaminant levels in water used to
prepare dialysate and concentrates from powder at a dialysis facility
and to reprocess dialyzers for multiple usea.
Contaminant
Aluminum. . . . . . . . . . . . . . . . . . . .
Antimony . . . . . . . . . . . . . . . . . . . .
Arsenic. . . . . . . . . . . . . . . . . . . . . .
Barium . . . . . . . . . . . . . . . . . . . . . .
Beryllium . . . . . . . . . . . . . . . . . . . .
Cadmium . . . . . . . . . . . . . . . . . . . .
Calcium . . . . . . . . . . . . . . . . . . . . .
Chloramines. . . . . . . . . . . . . . . . . .
Chromium . . . . . . . . . . . . . . . . . . .
Copper . . . . . . . . . . . . . . . . . . . . . .
Fluoride . . . . . . . . . . . . . . . . . . . . .
Free Chlorine. . . . . . . . . . . . . . . . .
Lead. . . . . . . . . . . . . . . . . . . . . . . .
Magnesium . . . . . . . . . . . . . . . . . .
Mercury . . . . . . . . . . . . . . . . . . . . .
Nitrate (as N) . . . . . . . . . . . . . . . . .
Potassium . . . . . . . . . . . . . . . . . . .
Selenium . . . . . . . . . . . . . . . . . . . .
Silver . . . . . . . . . . . . . . . . . . . . . . .
Sodium. . . . . . . . . . . . . . . . . . . . . .
Sulfate . . . . . . . . . . . . . . . . . . . . . .
Thallium . . . . . . . . . . . . . . . . . . . . .
Zinc . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Concentration
(mg/L)b
0.01
0.006
0.005
0.10
0.0004
0.001
2 (0.1 mEq/L)
0.10
0.014
0.10
0.20
0.50
0.005
4 (0.3 mEq/L)
0.0002
2.00
8 (0.2 mEq/L)
0.09
0.005
70 (3.0 mEq/L)
100.00
0.002
0.10
a) The physician has the ultimate responsibility for ensuring the quality
of water used for dialysis.
b) Unless otherwise noted.
Water Bacteriology/Endotoxins
Product water used to prepare dialysate or concentrates from powder at a
dialysis facility, or to reprocess dialyzers for multiple use, should contain a
total viable microbial count of less than 200 CFU/mL and an endotoxin
concentration of less than 2 EU/mL. The action level for the total viable
microbial count in the product water shall be 50 EU/mL and the action
level for the endotoxin concentration shall be 1 EU/mL. If these action
levels are observed in the product water, corrective measures, such as
disinfection and retesting, shall be taken promptly to reduce the levels to
an acceptable range.
Siemens
Water Technologies
BACK
236
REFERENCE TABLES
Boiler Feedwater Requirements
U.S. BOILER FEEDWATER REQUIREMENTS
Boiler H.P.
50
75
100
150
175
200
225
250
275
300
350
400
500
750
1,000
1,500
2,000
2,500
3,000
4,000
4,500
5,000
10,000
15,000
20,000
25,000
35,000
40,000
45,000
50,000
60,000
80,000
100,000
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
gpm
4.............
5.............
7.............
10 . . . . . . . . . . . . .
12 . . . . . . . . . . . . .
14 . . . . . . . . . . . . .
16 . . . . . . . . . . . . .
17 . . . . . . . . . . . . .
19 . . . . . . . . . . . . .
21 . . . . . . . . . . . . .
24 . . . . . . . . . . . . .
28 . . . . . . . . . . . . .
34 . . . . . . . . . . . . .
53 . . . . . . . . . . . . .
69 . . . . . . . . . . . . .
104 . . . . . . . . . . . . .
138 . . . . . . . . . . . . .
172 . . . . . . . . . . . . .
207 . . . . . . . . . . . . .
276 . . . . . . . . . . . . .
310 . . . . . . . . . . . . .
345 . . . . . . . . . . . . .
689 . . . . . . . . . . . . .
1,034 . . . . . . . . . . . . .
1,387 . . . . . . . . . . . . .
1,723 . . . . . . . . . . . . .
2,413 . . . . . . . . . . . . .
2,759 . . . . . . . . . . . . .
3,102 . . . . . . . . . . . . .
3,447 . . . . . . . . . . . . .
4,136 . . . . . . . . . . . . .
5,515 . . . . . . . . . . . . .
6,894 . . . . . . . . . . . . .
pound/hour
1,725
2,587
3,450
5,175
6,037
6,900
7,762
8,625
9,847
10,350
12,075
13,800
17,250
25,875
34,500
51,750
69,000
86,250
103,500
138,000
155,250
172,500
345,000
517,500
690,000
862,500
1,207,500
1,380,000
1,550,000
1,725,000
2,070,000
2,760,000
3,450,000
Notes:
• gpm is given to the nearest whole number
• The above water quantities are based on 34.5 lb. of water evaporated per
hour at 212°F. The weight of 1 gallon of water is taken as being equal to
8.34 lb. at 60°F. Intermediate water quantities in gpm are obtainable by
multiplying the boiler horsepower by 0.069.
• In selecting boiler feed pumps, the fact that boilers are often run 200 or
300 percent of rating should be taken into consideration. The above figures
are of the actual boiler horsepower developed.
• Boiler feed pumps should have pressure in excess of the boiler rated
pressure in order to compensate for frictional losses, entrance losses,
regulating valve losses and normal static head. These should be specified
for a particular installation. However, for estimating purposes, the following
values apply.
Boiler Pressure
Feed Pump Discharge Pressure
200 psi. . . . . . . . . . . . . . .
250 psi
400 psi. . . . . . . . . . . . . . .
475 psi
800 psi. . . . . . . . . . . . . . .
925 psi
1,200 psi . . . . . . . . . . . . .
1,350 psi
Siemens
Water Technologies
BACK
237
REFERENCE TABLES
Langelier (CaCO3) Saturation Index
(Based on the Langelier Formula: Larson-Buswell: Residue-Temperature- Adjustments: Arranged
by Nordell)
TABLE A:
Total Solids/ppm
ppm
50
75
100
150
200
300
400
600
800
1000
2000
3000
4000
5000
6000
0.07
0.08
0.10
0.11
0.13
0.14
0.16
0.18
0.19
0.20
0.23
0.25
0.26
0.26
0.28
TABLE B:
Temperatures in °F
Units
Tens 0
2
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
2.48
2.34
2.20
2.06
1.95
1.84
1.74
1.65
1.57
1.48
1.40
1.32
1.26
1.19
2.60
2.45
2.31
2.17
2.04
1.92
1.82
1.72
1.64
1.55
1.46
1.38
1.31
1.24
1.18
1. pHs = (9.30 + A + B) – (C + D)
4
2.57
2.43
2.28
2.14
2.03
1.90
1.80
1.71
1.62
1.53
1.44
1.37
1.29
1.23
1.17
6
2.54
2.40
2.25
2.11
2.00
1.88
1.78
1.69
1.60
1.51
1.43
1.35
1.28
1.22
1.16
(Note. Values of A, B, C, & D are obtained from tables A, B, C, & D)
8
2. Saturation Index = pH – pHs
2.51
2.37
2.22
2.09
1.97
1.86
1.76
1.67
1.58
1.50
1.41
1.34
1.27
1.21
If index is 0, water is in chemical balance.
If index is plus quantity, scale forming tendencies are indicated.
If index is a minus quantity, corrosive tendencies are indicated.
Example: To find the saturation index at 124°F of water which has the
following characteristics: Total solids – 400 ppm; calcium hardness as CaCO3240 ppm; alkalinity, and as CaCO3-196 ppm; and pH of 7.2 Then:
Total solids . . . . . . . . . . . . . . . . . .
Temperature . . . . . . . . . . . . . . . . .
Calcium hardness as CaCO3 . . . . .
Alkalinity as CaCO3 . . . . . . . . . . . .
400 ppm =0.16 (from table A)
124°F =1.53 (from table B)
240 ppm = 1.98 (from lower table C )
196 ppm = 2.29 (from upper table D)
Substituting: pHs = (9.30 + 0.16 + 1.53 ) – (1.98 + 2.29) = 6.72 (or 6.7)
Saturation Index = 7.2 – 6.7 = +0.5
TABLE C:
Calcium Hardness Expressed as ppm CaCO3
(for 3 to 209 ppm CaCO3, use upper table; for 210 to 990 ppm CaCO2, use lower table)
TABLE D:
Alkalinity Expressed as ppm CaCO3
(for 1 to 209 ppm CaCO3, use upper table; for 210 to 990 ppm CaCO2, use lower table)
Tens
Tens
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
Hundreds
200
300
400
500
600
700
800
900
Units
0
1
2
0.60
0.90
1.08
1.20
1.30
1.38
1.45
1.51
1.56
1.60
1.64
1.68
1.72
1.75
1.78
1.81
1.83
1.86
1.88
1.90
0.64
0.92
1.09
1.21
1.31
1.39
1.45
1.51
1.56
1.61
1.65
1.68
1.72
1.75
1.78
1.81
1.84
1.86
1.88
1.91
Tens
0
10
2.08
2.20
2.30
2.38
2.45
2.51
2.56
1.92
2.09
2.21
2.31
2.39
2.45
2.51
2.56
3
4
5
6
7
8
9
0.68
0.94
1.11
1.23
1.32
1.39
1.46
1.52
1.57
1.61
1.65
1.69
1.72
1.75
1.78
1.81
1.84
1.86
1.89
1.91
0.08
0.72
0.96
1.12
1.24
1.33
1.40
1.47
1.52
1.57
1.61
1.66
1.69
1.73
1.76
1.79
1.81
1.84
1.86
1.89
1.91
0.20
0.75
0.98
1.13
1.25
1.34
1.41
1.47
1.53
1.58
1.62
1.66
1.70
1.73
1.76
1.79
1.82
1.84
1.87
1.89
1.91
0.30
0.78
1.00
1.15
1.26
1.34
1.42
1.48
1.53
1.58
1.62
1.66
1.70
1.73
1.76
1.79
1.82
1.85
1.87
1.89
1.91
0.38
0.81
1.02
1.16
1.26
1.35
1.42
1.48
1.54
1.58
1.63
1.67
1.70
1.74
1.77
1.80
1.82
1.85
1.87
1.89
1.92
0.45
0.83
1.03
1.17
1.27
1.36
1.43
1.49
1.54
1.59
1.63
1.67
1.71
1.74
1.77
1.80
1.82
1.85
1.87
1.90
1.92
0.51
0.86
1.05
1.18
1.28
1.37
1.43
1.49
1.55
1.59
1.64
1.67
1.71
1.74
1.77
1.80
1.83
1.85
1.88
1.90
1.92
0.56
0.88
1.06
1.19
1.29
1.37
1.44
1.50
1.55
1.60
1.64
1.68
1.71
1.75
1.78
1.80
1.83
1.85
1.88
1.90
1.92
20
30
40
50
60
70
80
90
1.94
2.11
2.23
2.32
2.39
2.46
2.52
2.57
1.96
2.12
2.24
2.33
2.40
2.47
2.52
2.57
1.98
2.13
2.25
2.34
2.41
2.47
2.53
2.58
BACK
2.00
2.15
2.26
2.34
2.42
2.48
2.53
2.58
2.02
2.16
2.26
2.35
2.42
2.48
2.54
2.58
2.03
2.17
2.27
2.36
2.43
2.49
2.54
2.59
2.05
2.18
2.28
2.37
2.43
2.49
2.55
2.59
2.06
2.19
2.29
2.37
2.44
2.50
2.55
2.60
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
Hundreds
200
300
400
500
600
700
800
900
Units
0
1
1.00
1.30
1.48
1.60
1.70
1.78
1.85
1.90
1.95
2.00
2.04
2.08
2.11
2.15
2.18
2.20
2.23
2.26
2.28
2.30
0.00
1.04
1.32
1.49
1.61
1.71
1.79
1.85
1.91
1.96
2.00
2.05
2.08
2.12
2.15
2.18
2.21
2.23
2.26
2.28
2.30
2.48
2.60
2.70
2.78
2.85
2.90
2.95
2.32
2.49
2.61
2.71
2.79
2.85
2.91
2.96
Tens
0
10
2
3
4
5
6
7
8
0.30
1.08
1.34
1.51
1.62
1.72
1.79
1.86
1.91
1.96
2.01
2.05
2.09
2.12
2.15
2.18
2.21
2.23
2.26
2.28
2.30
0.48
1.11
1.36
1.52
1.63
1.72
1.80
1.86
1.92
1.97
2.01
2.05
2.09
2.12
2.16
2.18
2.21
2.24
2.26
2.29
2.31
0.60
1.15
1.38
1.53
1.64
1.73
1.81
1.87
1.92
1.97
2.02
2.06
2.09
2.13
2.16
2.19
2.21
2.24
2.26
2.29
2.31
0.70
1.18
1.40
1.54
1.65
1.74
1.81
1.88
1.93
1.98
2.02
2.06
2.10
2.13
2.16
2.19
2.22
2.24
2.27
2.29
2.31
0.78
1.20
1.42
1.56
1.66
1.75
1.82
1.88
1.93
1.98
2.03
2.06
2.10
2.13
2.16
2.19
2.22
2.24
2.27
2.29
2.31
0.85
1.23
1.43
1.57
1.67
1.76
1.83
1.89
1.94
1.99
2.03
2.07
2.10
2.14
2.17
2.20
2.23
2.25
2.27
2.29
2.32
0.90
1.26
1.45
1.58
1.68
1.76
1.83
1.89
1.94
1.99
2.03
2.07
2.11
2.14
2.17
2.20
2.23
2.25
2.27
2.30
2.32
20
30
40
50
60
70
80
2.34
2.51
2.62
2.72
2.79
2.86
2.91
2.96
2.36
2.52
2.63
2.72
2.80
2.86
2.92
2.97
2.38
2.53
2.64
2.73
2.81
2.87
2.92
2.97
2.40
2.54
2.65
2.74
2.81
2.88
2.93
2.98
2.42
2.56
2.66
2.75
2.82
2.88
2.93
2.98
2.43
2.57
2.67
2.76
2.83
2.89
2.94
2.99
2.45
2.58
2.68
2.76
2.83
2.89
2.94
2.99
Siemens
Water Technologies
9
0.95
1.29
1.46
1.59
1.69
1.77
1.84
1.90
1.95
2.00
2.04
2.08
2.11
2.14
2.17
2.20
2.23
2.25
2.28
2.30
2.32
90
2.46
2.59
2.69
2.77
2.84
2.90
2.95
3.00
238
REFERENCE TABLES
Calcium Carbonate Equivalents
Formula, Atomic, Molecular and Equivalent Weights and Conversion Factors to CaCO3 of
Substances Frequently Appearing in the Chemistry of Water Treatment
Substance
Formula
Aluminum
Aluminum Chloride
Aluminum Chloride
Aluminum Sulfate
Aluminum Sulfate
Aluminum Hydrate
Al
AlCl3
AlCl3 6H2O
Al2(SO4)3;18H2O
Al2(SO4)3 (anhydrous)
Al(OH)3
Alumina
Sodium Aluminate
Ammonium Alum
Atomic or
Molecular
Weight
Equivalent
Weight
27.0
133.2
241.5
666.4
342.1
78.0
9.0
44.4
80.5
111.1
57.0
26.0
Al2O3
Na2Al2O4
101.9
163.9
2SO4 24H2O
906.6
Al2(SO4)3 (NH4)
Potassium Alum
Ammonia
Ammonium (Ion)
Ammonium Chloride
Ammonium Hydroxide
Ammonium Sulfate
Al2(SO4)3K2SO2 24H2O 948.8
NH3
17.0
NH4
18.0
NH4Cl
53.5
NH4OH
35.1
(NH4) 2SO4
132.2
Barium
Barium Carbonate
Barium Chloride
Barium Hydroxide
Barium Oxide
Barium Sulfate
Ba
BaCO3
BaCl2 2H2O
Ba(OH)2
BaO
BaSO4
Calcium
Calcium Bicarbonate
Calcium Carbonate
Calcium Chloride
Calcium Hydrate
Calcium Hypochlorite
Calcium Oxide
Calcium Sulfate
Calcium Sulfate
Calcium Nitrate
Calcium Phosphate
Ca
Ca(HCO3)2
CaCO3
CaCl2
Ca(OH)2
Ca(ClO)2
CaO
CaSO4 (anhydrous)
CaSO4 2H2O (gypsum)
Ca(NO3)2
Ca3(PO4)2
Carbon
Chlorine (Ion)
Multiplying Factor
Considering Molecular
Wt. of CaCO3 as 100
Substance
CaCO3
to CaCO3
equivalent
equivalent to substance
5.56
1.13
0.62
0.45
0.88
1.92
0.18
0.89
1.61
2.22
1.14
0.52
17.0
27.3
2.94
1.83
0.34
0.55
151.1
0.33
3.02
156.1
17.0
18.0
53.5
35.1
66.1
0.82
2.94
2.78
0.94
1.43
0.76
3.12
0.34
0.36
1.07
0.70
1.32
137.4
197.4
244.3
171.4
153.4
233.4
68.7
98.7
122.2
85.7
76.7
116.7
0.73
0.51
0.41
0.59
0.65
0.43
1.37
1.97
2.44
1.71
1.53
2.33
40.1
162.1
100.08
111.0
74.1
143.1
56.1
136.1
172.2
164.1
310.3
20.0
81.1
50.1
55.5
37.1
35.8
28.0
68.1
86.1
82.1
51.7
2.50
0.62
1.00
0.90
1.35
0.70
1.79
0.74
0.58
0.61
0.97
0.40
1.62
1.00
1.11
0.74
1.43
0.56
1.36
1.72
1.64
1.03
C
12.0
3.0
16.67
0.06
Cl
35.5
35.5
1.41
0.71
63.6
160.0
250.0
31.8
80.0
125.0
1.57
0.63
0.40
0.64
1.60
2.50
Copper (Cupric)
Cu
Copper Sulfate (Cupric) CuSO4
Copper Sulfate (Cupric) CuSO4 5H2O
Atomic or
Molecular
Weight
Equivalent
Weight
Substance
Formula
Iron (Ferrous)
Iron (Ferric)
Ferrous Carbonate
Ferrous Hydroxide
Ferrous Oxide
Ferrous Sulfate
Ferrous Sulfate
Ferrous Sulfate
Fe’’
Fe’’’
FeCO3
Fe (OH)2
FeO
FeSO4 (anhydrous)
FeSO4 7H2O
FeSO4 (anhydrous)
Substance
CaCO3
to CaCO3
equivalent
Ferric Chloride
Ferric Chloride
Ferric Hydroxide
Ferric Oxide
Ferric Sulfate (Ferrisul)
Ferrous or Ferric
FeCl3
FeCl3 6H2O
Fe (OH)3
Fe2O3
Fe2 (SO4)3
Fe or Fe
Fluorine
F
Hydrogen (Ion)
H
Iodine
I
127.0
127.0
0.40
2.54
Lead
Pb
207.0
103.5
0.48
2.08
Magnesium
Magnesium Oxide
Magnesium Bicarbonate
Magnesium Carbonate
Magnesium Chloride
Magnesium Chloride
(Hexahydrate)
Magnesium Hydrate
Magnesium Nitrate
Magnesium Phosphate
Magnesium Sulfate
Magnesium Sulfate
(Epsom Salt)
Manganese
(Manganous)
Manganese (Manganic)
Manganese Chloride
Manganese Dioxide
Manganese Hydrate
Manganic Oxide
Manganous Oxide
Mg
MgO
Mg (HCO3)2
MgCO3
MgCl2
24.3
40.3
146.3
84.3
95.3
12.2
20.2
73.2
42.2
47.7
4.12
2.48
0.68
1.19
1.05
0.24
0.40
1.46
0.84
0.95
MgCl2 6H2O
Mg(OH)2
Mg(NO3)2
Mg3(PO4)2
MgSO4
203.2
58.3
148.3
262.9
120.4
101.6
29.2
74.2
43.8
60.2
0.49
1.71
0.67
1.14
0.83
2.03
0.58
1.48
0.88
1.20
MgSO4 7H2O
246.4
123.2
0.406
2.46
Mn’’
Mn’’’
MnCl2
MnO2
Mn(OH)2
Mn2O3
MnO
54.9
54.9
125.8
86.9
89.0
157.8
70.9
27.5
18.3
62.9
21.7
44.4
26.3
35.5
1.82
2.73
0.80
2.30
1.13
1.90
1.41
0.55
0.37
1.26
0.43
0.89
0.53
0.71
55.8
55.8
115.8
89.9
71.8
151.9
278.0
151.9
27.9
18.6
57.9
44.9
35.9
76.0
139.0
151.9
162.3
270.3
106.8
159.6
399.9
55.8
54.1
90.1
35.6
26.6
66.7
55.8
0.93
1.08
0.56
1.80
1.41
0.71
1.88
0.53
0.75
1.33
oxidation
19.0
19.0
2.66
1.01
1.01
Siemens
Water Technologies
BACK
Multiplying Factor
Wt. of CaCO3 as 100
1.79
0.56
2.69
0.37
0.86
1.16
1.11
0.90
1.39
0.72
0.66
1.52
0.36
2.78
oxidation
50.0
0.38
0.02
239
REFERENCE TABLES
Substance
Formula
Nitrate (Ion)
NO3
Nitrogen (Valence 3)
N’’’
Nitric Acid
Atomic or
Molecular
Weight
HNO3
Nitrogen (Valence 5)
N’’’’’
Oxygen
O
K
Potassium Chloride
KCl
Potassium Carbonate
62.0
14.0
4.7
14.0
Phosphorus (Valence 5) P’’’’’
Potassium
62.0
63.0
Phosphorus (Valence 3) P’’’
63.0
2.8
Substance
CaCO3
to CaCO3
equivalent
0.81
0.79
10.8
17.9
1.24
1.26
0.093
Na2SO4
142.1
270.2
Na2S2O3
Sr
0.78
Sulfur (Valence2)
S’’
32.1
1.49
Sulfur (Valence 6)
S’’’’’’
32.1
69.1
0.72
1.38
56.1
56.1
0.88
1.12
169.9
169.9
0.29
3.40
39.1
74.6
1.28
0.67
Silica
SiO2
60.1
60.1
0.83
1.2
Sodium
Na
23.0
23.0
2.18
0.46
Sodium Bisulfate
NaHSO4
120.1
Na2CO3
106.0
143.3
28.1
84.0
143.3
7.03
0.35
7.14
2.87
Sulfur (Valence4)
Sulfur Dioxide
Tin (Valence 2)
135.1
0.37
2.71
64.1
43.8
8.02
5.34
32.0
6.25
9.10
1.26
0.88
0.32
0.16
0.11
1.56
0.64
5.56
0.18
Zn’’
65.4
32.7
HCO3
61.0
61.0
0.82
1.22
Carbon Dioxide
CO2
44.0
44.0
1.14
.88
126.9
126.9
0.40
2.54
Zinc (Valence 2)
ACID RADICALS
Carbonate
Bicarbonate
H2O
18.0
CO3
1.68
104.1
104.1
0.48
2.08
Chloride
58.5
58.5
0.85
1.17
Iodide
l
60.0
Cl
35.5
59.5
1.14
1.59
119.0
0.14
2.40
1.42
0.63
Sn’’
Water
0.60
0.42
32.1
SO2
84.0
120.1
87.6
S’’’’
0.70
3.13
Strontium
138.0
71.0
16.0
0.21
0.12
0.68
0.79
4.76
8.33
1.47
63.0
10.3
6.2
34.0
126.1
31.0
Na2SO3
Substance
CaCO3
to CaCO3
equivalent
158.1
Na2S4O6
Sodium Sulfite
Equivalent
Weight
Multiplying Factor
Wt. of CaCO3 as 100
158.1
Sodium Tetrathionate
AgNO3
NaHCO3
Sodium Thiosulfate
0.16
Silver Nitrate
Sodium Bicarbonate
102.0
6.25
74.6
Si’’’’
NaPO3 (69% P2O5)
Sodium Sulfate
KOH
Silicon (Valence 4)
(Hagan)
Atomic or
Molecular
Weight
8.0
39.1
AgCl
Meta-Phosphate
Formula
0.056
Potassium Hydroxide
Silver Chloride
Substance
16.0
31.0
K2CO3
Equivalent
Weight
Multiplying Factor
Wt. of CaCO3 as 100
9.00
30.0
35.5
0.84
1.54
1.67
1.41
1.19
0.65
.60
.71
Sodium Bisulfite
NaHSO3
Sodium Chloride
NaCl
Sodium Hypochlorite
NaClO
74.5
37.3
0 .67
1.49
Nitrate
NO3
62.0
62.0
0.81
1.24
Sodium Nitrate
NaNO3
85.0
85.0
0.59
1.70
Phosphate
PO4
95.0
31.7
1.58
0.63
NaNO2
69.0
69.0
0.73
1.38
P2O5
142.0
23.7
2.11
0.47
SO4
96.1
48.0
1.04
0.96
1.0
50.00
0.02
31.0
1.61
Sodium Carbonate
Sodium Hydroxide
Sodium Nitrite
Sodium Oxide
Tri-sodium Phosphate
Tri-sodium Phosphate
(anhydrous)
Di-sodium Phosphate
Di-sodium Phosphate
(anhydrous)
NaOH
40.0
Na2O
62.0
Na3PO4 12H2O
(18.7% P2O5)
53.0
40.0
31.0
0.94
1.25
1.61
1.06
0.80
0.62
380.2
126.7
0.40
2.53
Na3PO4 (43.2% P2O5) 164.0
54.7
0.91
1.09
Na2HPO4 12H2O
(19.8% P2O5)
358.2
119.4
0.42
2.39
Na2HPO4 (50% P2O5)
142.0
47.3
1.06
0.95
Monosodium Phosphate NaH2PO4 H2O
(51.4% P2O5)
138.1
Mono-sod. (anhydrous) NaH2PO4 (59.1% P2O5) 120.0
46.0
40.0
1.09
1.25
0.92
0.80
Hydroxyl
Phosphorous Oxide
Sulfide (Valence 2)
Sulfate
Sulfur Trioxide
ACIDS
OH
S’’
32.1
SO3
Hydrogen
H
Carbonic Acid
H2CO3
Acetic Acid
17.0
80.1
1.0
17.0
16.0
40.0
2.94
3.11
1.25
0.32
0.80
HC2H3O2
60.1
60.1
Hydrochloric Acid
HCl
36.5
36.5
1.37
0.73
Sulfurous Acid
H2SO3
82.1
41.1
1.22
0.82
Hydrogen Sulfide
H2S
–
–
–
Phosphoric Acid
Sulfuric Acid
Manganous Acid
H3PO4
62.0
98.0
H2SO4
98.1
H2MnO3
104.9
32.7
49.0
52.5
0.83
1.53
1.02
0.95
Siemens
Water Technologies
BACK
0.34
1.20
0.62
0.65
0.98
–
1.05
REFERENCE TABLES
Equivalents
EQUIVALENTS OF LIQUID MEASURES AND WEIGHTS
(3) By
s
(2) Multiply
Gallon
Gallon
s
(1) To Obtain
s
Imperial Gallon
1
0.833
0.125
0.1041
7.48052
6.22888
0.2641779
0.2199756
Imperial Gallon
1.2009
Pint
Pound Water*
1
0.11995
Cubic Foot
Cubic Inch
Cubic Meter
264.170
s
(3) By
1
0.0069445
14.696
14.2233
0.001422
0.036092
0.432781
0.491154
0.0193368
14.5038
145.038
144
1
2116.22
2048.155
0.204768
5.1972
62.3205
70.7262
2.78450
2088.55
20885.5
0.13368
1
1.042
59.8442
62.365
10
1
0.03609
219.969
2113.34
2202
s
(2) Multiply
8.337
0.034632
2.113423
pound/in2 pound/ft2 Atmospheres
0.068046
0.000473
1
0.96784
0.0000968
.002454
0.029449
0.033421
0.0013158
0.98692
9.8692
2.202
kg/cm2
kg/m2
0.070307
0.000488
1.0332
1
0.0001
0.00253
0.03043
0.03453
0.0013595
1.01972
10.1972
703.070
4.8241
10332.27
10000
1
25.375
304.275
345.316
13.59509
10197.2
101972.0
inch water
(68°F)
27.7276
0.1926
407.484
394.38
0.3944
1
12
13.6185
0.53616
402.156
4021.56
*Water at 68°F (20°C) Mercury at 32°F (0°C) **MPa (megapascal) = 10 bar = 1,000,000 N/m2 (newton/meter2)
EQUIVALENTS OF FLOW RATE
(3) By
s
gpm. . . . . . . . . . . . . . . . . . .
gpd . . . . . . . . . . . . . . . . . . .
lpm . . . . . . . . . . . . . . . . . . .
m3/hr . . . . . . . . . . . . . . . . . .
ft3/min . . . . . . . . . . . . . . . . .
pound/min . . . . . . . . . . . . . .
gpm
s
(2) Multiply
s
(1) To Obtain
1. . . . . . . .
0.000694. . . . . . . .
0.2642. . . . . . . .
4.403. . . . . . . .
7.48. . . . . . . .
0.1199. . . . . . . .
Cubic Foot
8
0.00361
EQUIVALENTS OF PRESSURE AND HEAD
pound/in2
pound/ft2
Atmospheres
kg/cm2
kg/m6
inch water*
foot water*
inch mercury**
mm mercury**
bar**
MPa**
Pound Water*
0.9596
*Water at 60°F (15.6°C) 1 Barrel = 42 gallons (petroleum measure)
(1) To Obtain
Pint
9.60752
0.1
0.004329
Liter
s
240
gpd
1440. . . . . . . .
1. . . . . . . .
380. . . . . . . .
6370. . . . . . . .
10771.2. . . . . . . .
172.72. . . . . . . .
Cubic Inch
Liter
Cubic Meter
231
3.78533
0.003785
0.01671
28.875
0.473166
0.000473
1
1728
2831702
0.028317
0.16054
277.42
0.016035
4.54596
27.708
0.0005787
0.0353154
0.45405
0.016387
0.0000164
61023.38
999.972
1
1
foot water inch mercury mm mercury
(68°F)
(32°F)*
(32°F)*
2.3106
0.01606
33.9570
32.8650
0.003287
0.08333
1
1.1349
0.044680
33.5130
335.130
2.03602
0.014139
299.921
28.959
0.002896
0.073430
0.88115
1
0.03937
29.5300
295.300
lpm
m3/hr
3.785. . . . . . . .
0.00263. . . . . . . .
1. . . . . . . .
16.67. . . . . . . .
28.3. . . . . . . .
0.454. . . . . . . .
0.2271. . . . . . . . .
0.000158. . . . . . . . .
0.06. . . . . . . . .
1. . . . . . . . .
1.7. . . . . . . . .
0.2724. . . . . . . . .
51.7150
0.35913
760
735.559
0.073556
1.8651
22.3813
25.40005
1
750.062
7500.62
0.001000
bar**
megapascal
(MPa)**
0.06895
0.000479
1.01325
0.98067
0.000098
0.00249
0.029839
0.033864
0.001333
1
10.0
ft3/min
0.1337. . . . . . . . .
9.284 x 10-5 . . . . . . . . .
0.0353. . . . . . . . .
0.588. . . . . . . . .
1. . . . . . . . .
0.00267. . . . . . . . .
Siemens
Water Technologies
BACK
0.000454
1
61.02509
35.31446
0.004546
0.006895
0.0000479
0.101325
0.098067
0.0000098
0.000249
0.0029839
0.0033864
0.0001333
0.10
1
pound/min
8.337
0.00579
2.202
36.71
3750
1
REFERENCE TABLES
241
Temperature Conversion,
Tank Areas and Volume
FAHRENHEIT/CENTIGRADE TEMPERATURE CONVERSION CHART
°C
°F
160°
320°
140°
290°
120°
260°
100°
230°
212°
80°
200°
32°
170°
60°
140°
40°
20°
110°
80°
TANK AREAS AND VOLUMES*
Nominal Diameter
12” . . . . . . . . . . . . . . . . . .
14” . . . . . . . . . . . . . . . . . .
16” . . . . . . . . . . . . . . . . . .
18” . . . . . . . . . . . . . . . . . .
20” . . . . . . . . . . . . . . . . . .
24” . . . . . . . . . . . . . . . . . .
30” . . . . . . . . . . . . . . . . . .
36” . . . . . . . . . . . . . . . . . .
42” . . . . . . . . . . . . . . . . . .
48” . . . . . . . . . . . . . . . . . .
54” . . . . . . . . . . . . . . . . . .
60” . . . . . . . . . . . . . . . . . .
66” . . . . . . . . . . . . . . . . . .
72” . . . . . . . . . . . . . . . . . .
78” . . . . . . . . . . . . . . . . . .
84” . . . . . . . . . . . . . . . . . .
90” . . . . . . . . . . . . . . . . . .
96” . . . . . . . . . . . . . . . . . .
102” . . . . . . . . . . . . . . . . .
108” . . . . . . . . . . . . . . . . .
114” . . . . . . . . . . . . . . . . .
120” . . . . . . . . . . . . . . . . .
126” . . . . . . . . . . . . . . . . .
132” . . . . . . . . . . . . . . . . .
Area = sq. ft. or cu. ft. per ft. of depth
Unlined
Lined
0.785 . . . . . . . . . . . .
1.069 . . . . . . . . . . . .
1.396 . . . . . . . . . . . .
1.767 . . . . . . . . . . . .
2.182 . . . . . . . . . . . .
3.142 . . . . . . . . . . . .
4.784 . . . . . . . . . . . .
6.918 . . . . . . . . . . . .
9.444 . . . . . . . . . . . .
12.36 . . . . . . . . . . . . .
15.67 . . . . . . . . . . . . .
19.37 . . . . . . . . . . . . .
23.47 . . . . . . . . . . . . .
27.96 . . . . . . . . . . . . .
32.84 . . . . . . . . . . . . .
38.0 . . . . . . . . . . . . . .
43.67 . . . . . . . . . . . . .
49.71 . . . . . . . . . . . . .
56.15 . . . . . . . . . . . . .
62.99 . . . . . . . . . . . . .
70.07 . . . . . . . . . . . . .
77.68 . . . . . . . . . . . . .
85.68 . . . . . . . . . . . . .
94.07 . . . . . . . . . . . . .
0.765 . . . . . . . . . . . .
1.049 . . . . . . . . . . . .
1.372 . . . . . . . . . . . .
1.748 . . . . . . . . . . . .
2.157 . . . . . . . . . . . .
3.104 . . . . . . . . . . . .
4.703 . . . . . . . . . . . .
6.821 . . . . . . . . . . . .
9.33 . . . . . . . . . . . . .
12.24 . . . . . . . . . . . . .
15.53 . . . . . . . . . . . . .
19.22 . . . . . . . . . . . . .
23.30 . . . . . . . . . . . . .
27.77 . . . . . . . . . . . . .
32.63 . . . . . . . . . . . . .
37.77 . . . . . . . . . . . . .
43.42 . . . . . . . . . . . . .
49.45 . . . . . . . . . . . . .
55.8 . . . . . . . . . . . . . .
62.70 . . . . . . . . . . . . .
69.91 . . . . . . . . . . . . .
77.51 . . . . . . . . . . . . .
85.51 . . . . . . . . . . . . .
93.89 . . . . . . . . . . . . .
0°
50°
-20°
20°
-40°
-10°
-40°
U.S. Gallons per ft of depth
Unlined
Lined
5.87. . . . . . . . . . .
8.0. . . . . . . . . . . .
10.44. . . . . . . . . . .
13.22. . . . . . . . . . .
16.32. . . . . . . . . . .
23.50. . . . . . . . . . .
35.8. . . . . . . . . . . .
51.8. . . . . . . . . . . .
70.6. . . . . . . . . . . .
92.5. . . . . . . . . . . .
117.0. . . . . . . . . . . .
145.0. . . . . . . . . . . .
176.0. . . . . . . . . . . .
209.0. . . . . . . . . . . .
246.0. . . . . . . . . . . .
284.0. . . . . . . . . . . .
327.0. . . . . . . . . . . .
372.0. . . . . . . . . . . .
420.0. . . . . . . . . . . .
471.0. . . . . . . . . . . .
524.0. . . . . . . . . . . .
581.0. . . . . . . . . . . .
641.0. . . . . . . . . . . .
704.0. . . . . . . . . . . .
*These figures are actual values that have been corrected for shell thickness and true inside diameter measurements.
Lining is 3/23" up to 60"; 1/8" above 60".
5.73
7.86
10.27
13.09
16.12
23.20
35.2
51.0
69.8
91.6
116.0
144.0
174.0
208.0
244.0
283.0
325.0
370.0
418.0
469.0
523.0
580.0
640.0
702.0
Siemens
Water Technologies
BACK
242
REFERENCE TABLES
Relative Size of Particles
A KEY TO THE RELATIVE SIZES OF PARTICLES
Carbon Black
Jewelers Rouge
Tobacco Smoke
Beach Sand
Clouds/Fog
Virus
Drizzle
Bacteria
Colloidal
Suspended Matter
Electron Microscopy
Pleuro-Pneumonia-Like
Organisms
Pollens
Lung-Damaging Dust
Microfiltration
Ultrafiltration
Mist
Macrofiltration
Micrometers
µm
Sewing Needle
Diameter
Razer Blade Thickness
Human Hair Diameter
Flour
Smallest Visible Particle
BACK
1000
800
600
400
200
100
80
60
Ragweed Pollen
Aluminum Foil
40
20
Red Blood Cell
Yeasts and Fungi
Pseudomonas Cepacia Organism
Serratia Marcescens Organism
Pseudomonas Diminuta Organism
Polio Virus
10
8
6
4
2
1.0
0.88
0.6
0.4
0.2
0.1
0.08
0.04
0.04
0.02
0.01
0.008
0.006
0.004
0.002
0.001
Siemens
Water Technologies
243
REFERENCE TABLES
Velocity of Liquids in Pipes
VELOCITY OF LIQUIDS IN PIPE
The mean velocity of any flowing liquid can be
calculated from the following formula, or from the nomograph
to the right. The nomograph is a graphical solution of the
formula.
n = 183.3 q/d2 = 0.408 Q/d = 0.0509 W/d2ρ
(where d2 is the square of the inside diameter of commercial
wrought steel pipe)
The pressure drop per 100 feet and the velocity
in schedule 40 pipe, for water at 60°F, have been calculated
for commonly used flow rates for pipe sizes of 1/8 to 24 inch.
W
Q q
d
ρ
ν
Example
Given: Maximum flow rate of a liquid will be
300 gpm with maximum velocity limited to 12 feet per
second through Schedule 40 pipe.
Find: The smallest pipe size and the velocity through the
pipe.
Solution:
Connect
1. Q = 300
v = 12
2. 3 " Schedule 40 pipe suitable
3. Q = 300
3" Sched 40
Read
d = 2.75
ν = 10
Reasonable Velocities for the
Flow of Water through Pipe
Service Condition
Reasonable Velocity
Boiler Feed . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 15 ft per second
Pump suction and drain lines . . . . . . . . . . . . 4 to 7 ft per second
General Service . . . . . . . . . . . . . . . . . . . . . 4 to 10 ft per second
City . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 7 ft per second
Information contained here was obtained from “Flow of Fluids through Valves, Fittings and Pipe”, Copyright 1969 Crane Co.
BACK
Siemens
Water Technologies
Siemens
Water Technologies
BACK
Index and Glossary
TA B L E O F
CONTENTS
BACK
GLOSSARY OF KEY TERMS.................................................................246
TRADEMARK STATEMENT ...................................................................253
245
246
GLOSSARY
The following is a glossary of frequently used water treatment terms.
A
ABSOLUTE: A degree of filtration, usually referring to 99.9999%
removal of particulates greater than a stated size.
BACKWASH: The process in which beds of filter or ion exchange
media are subjected to flow in the opposite direction from the
service flow to loosen the bed and flush out suspended matter.
BACTERIA: Unicellular microorganisms that typically reproduce
by cell division. May or may not be harmful to humans.
ACID: A substance that releases hydrogen ions when dissolved in
water. Most acids will dissolve common metals, and will react
with a base to form a neutral salt and water. A chemical used to
regenerate cation ion exchange resin.
BASE: A substance that releases hydroxyl ions when dissolved in
water. Bases react with acids to form a neutral salt and water.
ACIDITY: An expression of the concentration of hydrogen ions
present in a solution.
BED DEPTH: The depth of the filter medium or ion exchange
resin in a vessel.
ACTIVATED CARBON: Carbon activated by high temperature
steam or carbon dioxide to form a material of high adsorptive
capacity. A porous material available in powdered or granular
form, activated carbon is used primarily for the removal of
chlorine and chloramines or dissolved organic matter.
BED EXPANSION: The effect produced during backwashing: the
resin particles become separated and rise in the column. This
expansion of the bed, caused by the increase in the space
between the resin particles, may be controlled by regulating
backwash flow.
ALKALINITY: In natural water, alkalinity results from the presence
of CO2, bicarbonate, carbonate, and hydroxide components. The
alkalinity test measures the quantity of alkaline materials in
water, whereas, the pH test indicates whether a water sample is
acidic or basic.
BOD (BIOCHEMICAL OXYGEN DEMAND): The amount of oxygen
utilized by natural agencies in stabilizing organic matter at
specified test conditions.
ALUM: Aluminum sulfate [Al(SO4)3 • 18 H2O], widely used for
flocculation of contaminants in municipal water treatment,
typically for the removal of color and turbidity.
ANION: A negatively charged ion.
BRACKISH WATER: Water containing dissolved solids in the range
of 1,000 to 10,000 mg/L.
BRINE: A solution of sodium chloride (salt) used for regenerating
water softeners. A mixed sodium, calcium and magnesium
chloride solution is the resulting waste solution from
regeneration.
ANTHRACITE: A granular, hard coal, used sometimes as a sand
filter media. In an activated form, anthracite is commonly used
for organic and chlorine removal (activated carbon) from water.
BRINE SEAL: A rubber lip on the outside of a spiral wound RO
cartridge that prevents feed bypass between the cartridge and
the inside pressure vessel wall.
ANTI-TELESCOPING DEVICE (ATD): A plastic cover that looks like a
wheel with spokes, and is attached to the ends of a spiral wound
RO cartridge to prevent distortion of the cartridge leaves caused
by high flows.
BRINE STREAM: The reject stream from an RO cartridge. Portion
of the feed stream that does not pass through the membrane.
AVERAGE TRANSMEMBRANE PRESSURE: Average transmembrane
pressure is the actual net driving force of water within a UF or
RO module. It is determined as follows:
200 psi = RO feed pressure
+190 psi = RO reject pressure
390 ÷2 = 195
195 = average transmembrane pressure (assuming the permeate
pressure is 0)
B
BACKFLOW: Flow of water in a pipe or line in a direction opposite
to the normal flow. Often associated with the flow of possibly
contaminated water into a potable water system.
BUBBLE POINT TEST: Used to test the integrity of 0.22 and 0.45
micron microporous filters.
BUFFER: A chemical that causes a solution to resist changes in
pH, or to shift the pH to a specific value.
C
CALCIUM CARBONATE EQUIVALENT: A common basis for
expressing the concentration of hardness and other salts in
chemically equivalent terms to simplify certain calculations.
Signifies that the concentration of a dissolved mineral is
chemically equivalent to the stated concentration of calcium
carbonate.
CAPACITY: The absorption ability possessed per unit of resin
volume or per unit of weight (i.e., the potential for exchange).
For water softeners, the capacity is expressed in grains of
Siemens
Water Technologies
BACK
GLOSSARY
hardness removal between regenerations, and is related to the
pounds of salt used in regeneration.
CAPACITY CURVE: A graph of capacity vs. regenerant levels for an
ion exchange unit or system.
CATION: A positively charged ion.
CAUSTIC: Any substance that releases hydroxide ions when
dissolved in water. A chemical used to regenerate anion ion
exchange resin.
CAVITATION: Caused by pump starvation, cavitation is a crackling
noise caused by bubbles imploding on the tip of impellers inside
the pump.
CHANNELING: The flow of water or other solution in a limited
number of passages in a filter or ion exchange bed, instead of
distributed flow through all the passages in the bed. May be
caused by fouling of the bed and plugging of many passages,
poor distributor design, flow rates that are too low, or faulty
operational procedures.
CHEMICAL FEEDER: A mechanical device designed to introduce
chemicals into a water system in proportion to water flow.
CHEVRON SEAL: A rubber lip on the outside of a spiral wound RO
cartridge that prevents feed bypass between the cartridge and
the inside pressure vessel wall.
CHLORAMINES: Compounds formed when chlorine and ammonia
are mixed in water. Used to kill bacteria in water, chloramines can
be inadvertently formed in chlorinated water supplies that contain
nitrogenous impurities. If present in water used for dialysate
preparation, chloramines can cause illness (particularly anemia) in
dialyzing patients. Can be removed by activated carbon.
Chloramine level can be determined by subtracting the free
chlorine level from the total chlorine level.
CHLORINATION: The process of water treatment whereby a chlorine
gas or liquid solution is injected into a water supply to control
microorganisms. The feed, demand and residual chlorine are
expressed as ppm.
CHLORINE DEMAND: A measure of the amount of chlorine that will
be consumed by organic matter and other oxidizable substances
in a water before a chlorine residual will be found. The difference
between the total chlorine fed and the chlorine residual.
CHLORINE, FREE AVAILABLE: The hypochlorite ions (OCI - ),
hypochlorous acid (HOCl) or the combination thereof present in
water.
CLARIFIER: A tank in which precipitate settles.
COAGULANT: A material, such as alum, which will form a
gelatinous precipitate in water, and cause the agglomeration of
finely divided particles into larger particles which can be
removed by settling and/or filtration.
BACK
247
COD (CHEMICAL OXYGEN DEMAND): The amount of oxygen
required under specified test conditions for the oxidation of
water borned organic and inorganic matter.
COLIFORM BACTERIA: A group of organisms primarily found in
human and animal intestines and wastes, and thus widely used
as indicator organisms to show the presence of such wastes in
water, and the possible presence of disease-producing bacteria.
COLLOID: A substance of very fine particle size, typically between
0.1 and 0.001 microns in diameter suspended in liquid or
dispersed in gas. A system of at least two phases, including a
continuous liquid plus solid, liquid or gaseous particles so small
that they remain in dispersion for a practicable time.
COLLOIDAL DENSITY INDEX: A test used to verify the performance
of point-of-use ultrafiltration systems. The test, which is very
similar to silt density index (SDI), is used to measure colloidal
concentration upstream and downstream of the system. It is
assumed that the feedwater to the system will be of very high
quality, rendering the SDI test invalid.
COLONY-FORMING UNITS (CFU): Unit used in the measure of total
bacteria count.
COLOR: Dissolved or suspended matter causing discoloration of
the water. Expressed as alpha units.
COMPACTION: The tightening of a membrane structure due to
compressive stress of operating pressure.
CONCENTRATION POLARIZATION: The phenomenon that occurs
when material retained by the membrane builds up on the
membrane surface and forms a boundary layer immediately
adjacent to the membrane surface. Over time, this layer causes a
decrease in flux.
CONDUCTIVITY: The electrical measurement of the water’s ability
to pass electric current. It is dependent on temperature and total
concentration of ionized substances in solution. The lower the
level of ionized substances, the lower the conductivity.
Conductivity is inverse of resistivity and is measured in
microsiemens/cm.
CONTINUOUS ELECTRODEIONIZATION (CEDI): A process that uses ion
exchange membranes, ion exchange resins and electricity to
produce consistent high-purity water without the need for
chemical regeneration. CEDI removes dissolved, ionizable materials
such as dissolved silica, carbon dioxide and some organics.
CONVERSION: The percentage of feed water that ends up as the
product, or permeate. Also known as recovery.
CROSSFLOW MEMBRANE FILTRATION: A separation of the
components of a fluid by semipermeable membranes through
the application of pressure and tangential flow to the membrane
surface. Includes the processes of reverse osmosis, ultrafiltration,
nanofiltration, and microfiltration.
Siemens
Water Technologies
248
GLOSSARY
D
DECARBONATOR: A device to remove carbon dioxide from water.
DECAT WATER: Water that has an absence of cations. Usually
produced by a cation resin regenerated with acid.
DEGASIFICATION: The process of removing dissolved gasses in
water.
DEIONIZATION: The removal of all ionized minerals and salts (both
organic and inorganic) from a solution by ion exchange.
Positively charges ions are removed by a cation exchange resin
in exchange for a chemically equivalent amount of hydrogen
ions. Negatively charged ions are removed by anion exchange
resin for a chemically equivalent amount of hydroxide ions. The
hydrogen and hydroxide ions introduced in this process unite to
form water molecules. The term is often used interchangeably
with demineralization.
DEMINERALIZATION: The process of removing minerals from
water, usually through deionization, reverse osmosis, or
distillation.
DEPTH FILTER: A filter of compacted sand, or diatomaceous
earth; sintered metal or glass; spool wound cotton fiber; or
compressed, matted fibers. Particles are retained in and on any
or all of the above by random adsorption or entrapment within
the matrix of the filters. Efficiency of depth filters are rated in
nominal terms.
DIALYSATE: The solution used in an artificial kidney machine to
remove excess fluids and metabolic end products from the blood.
DIALYSIS: The separation of components of a solution by
diffusion through a semi-permeable membrane which is capable
of passing certain ions or molecules while rejecting others.
DIATOMACEOUS EARTH: A powder-like filter media made from
crushed diatoms capable of submicron particle removal.
DIFFERENTIAL PRESSURE: The difference in pressure between
two given points in a water system. May be due to differences in
elevation, or to friction losses or pressure drops due to resistance
to flow in pipes, softeners, filters or other devices.
DISINFECTION: The process of killing disease-producing bacteria.
DISSOLVED IRON: In water conditioning, iron is usually
described as being dissolved or undissolved. The dissolved or
ferrous iron is ver y soluble in mos t water, and the
undissolved ferric iron is almost always insoluble.
DISSOLVED SOLIDS: The residual material remaining after filtering
the suspended material from water and evaporating the solution
to a dry state.
DISTILLATION: The process in which a liquid, such as water, is
converted into its vapor state by heating, and the vapor cooled
and condensed to the liquid state and collected. Used to remove
solids and other impurities from water.
DISTRIBUTOR: Used within softener or DI tank to distribute the
flow of water throughout the tank and to prevent resin from
escaping the vessel. Sometimes called a strainer.
E
E. COLI: Escherichia coli, one of the members of the coliform
group of bacteria associated with animal and human waste.
Normally used by health departments to rule on the purity of a
drinking water supply.
EFFLUENT: The water emerging from a treatment unit, system or
process, such as the product from an ion exchange unit.
ELECTRODEIONIZATION: A process that removes ionizable species
from liquids using an electrically active media and an electrical
potential to influence ion transport.
ELECTROLYTE: A chemical compound that dissociates or ionizes
in water to produce a solution that will conduct an electrical
current; an acid, base, or salt.
ELEMENT: Usually another term for filter or cartridge.
EXHAUSTION: The state in which resin is no longer capable of
useful ion exchange. The depletion of the exchanger’s supply of
available ions. The exhaustion point is determined in terms of a).
a value in parts per million of ions in the effluent solution, b).
the reduction in quality of the effluent water determined by a
conductivity bridge which measures the electrical resistance of
the water.
F
FEED: Raw or untreated water entering a water purification
system or ion exchange system for further treatment or
“polishing”.
FILTRATE: Also called permeate or product, filtrate is the purified
portion of a solution that passes through a membrane.
FINES: Extremely small particles of filter media or ion exchange
material, formed either in the manufacturing process or as a
result of breakdown. Undesirable in most systems because of
high pressure drop.
FLOCCULATION: The agglomeration of finely divided suspended
solids into larger, usually gelatinous, par ticles. The
development of a “floc” after treatment with a coagulant by
gentle stirring or mixing.
Siemens
Water Technologies
BACK
249
GLOSSARY
FLUX: The rate of fluid passage through a given area of
membrane per unit of time. Usually expressed in gallons per
square foot per day (gfd).
HIGH-PURITY WATER: Highly treated water with attention to
microbiological, particle, organics and mineral reduction or
elimination.
FORMALIN: A clear, aqueous solution of formaldehyde and a
small amount of methanol, used as a sanitant.
I
FORWARD AIR FLOW TEST: Also called “diffusion test” and
“integrity test”, the forward air flow test is a measurement of the
volume of gas which will pass through a membrane at a given
pressure. Used to detect any flaws in the integrity of membranes
or seals. In critical applications, this test should be performed
prior to each process run.
FOULING: The rapid reduction in flux, caused by the build-up of
retained material on the membrane surface. The process in
which undesirable foreign matter accumulates in a bed of filter
media or ion exchanger, clogging pores and coating surfaces
and thus preventing proper operation of the bed. Typical
symptoms of fouling are: a decrease in rated product flow (flux),
a decrease in percent salt rejection (RO membrane only), a rapid
increase of feed vs. reject differential pressure.
FOULING INDEX: Used synonymously with the terms “pluggage
test” and “silt density index”. A test used to determine the
concentration of colloids and particles in water fed to RO or UF
systems. The test results can be used to determine the
effectiveness of pretreatment systems and/or the need for
pretreatment. Silt density index is also the best method to
predict fouling characteristics caused by undissolved
contaminants.
G
GRAINS CAPACITY: The amount of minerals that will be removed
by a specific quantity of resin.
GRAM NEGATIVE BACTERIA: A type of bacteria capable of
surviving and multiplying in all types of waters, even those
treated by reverse osmosis, deionization, softeners, and
distillation. Dead gram negative bacteria contain bacterial
endotoxin, or pyrogens, that cause a fever when injected into
the bloodstream.
GREENSAND: A mineral (glauconite), used as a filtration medium.
H
HARDNESS: The solution of calcium and magnesium as cations
independent of the nature of anions present. Generally
expressed in terms of calcium carbonate.
HARDNESS LEAKAGE: The presence of hardness minerals
(calcium and magnesium) after water has passed through the
softener. Hardness leakage is caused primarily by resin bed
channeling, due to improper backwashing, the existence of
algae, or a combination of a high service flow with a high
hardness content.
INFLUENT: The water entering a treatment unit, system or
process, such as the feed entering an ion exchange unit.
ION EXCHANGE: A process in which certain ions of a given charge
may be absorbed from solution and replaced in the solution by
different ions of a similar charge from the resin.
L
LAL: Abbreviation for Limulus Amebocyte Lysate, a reagent used
to detect endotoxins (pyrogens) in a water supply.
LANGELIER SATURATION INDEX: A measure of the probability of
whether water will precipitate or dissolve calcium carbonate,
which forms scaling on the walls of pipes and RO membranes.
The index is calculated from the total calcium, alkalinity, pH,
temperature, and total dissolved solids of the water. A positive
index indicates scaling tendencies, while a negative index
indicates that scaling will not occur.
LEAKAGE: The phenomenon in which some of the influent ions
are not removed and appear in the effluent of an ion exchange
system. Leakage may be caused by incomplete regeneration,
excessive flow rates, low temperatures, the concentration or
characteristics of the influent ions.
LIME SCALE: Hard water scale containing a high percentage of
calcium carbonate.
M
MACRORETICULAR: A term used to describe resins that have a
rigid polymer porous network in which there exists a true pore
structure even after drying. The pores are larger than atomic
distances and are not part of the gel structure.
MANGANESE GREENSAND: A manganese-coated greensand used
as a filter medium for removal of manganese and iron.
MEGOHM: One million ohms. Usually used as a measure of water
purity, on resistivity in megohm-cm.
MEMBRANE: Media through which a liquid is passed. The term is
usually used to define the functional filter material, and not its
supporting substrate, screens or other cartridge components.
The word membrane is often used synonymously with filter or
cartridge.
MESH: The number of openings in a lineal inch of wire cloth.
MHO: A measure of conductance, reciprocal of ohms.
Siemens
Water Technologies
BACK
250
GLOSSARY
MICROFILTRATION: Filtration designed to remove particles and
bacterial in the approximate range of 0.05 to 10 micrometers.
MICROMHO (MICROSIEMENS): One millionth of a Mho. Unit of
measurement for conductivity (equivalent to the inverse of 1
million ohms of resistivity). Water quality is measured by its
conductivity in micromhos per centimeter. The higher the
quality the lower the micromho reading.
MICRON (MICROMETERS): A metric unit of measurement
equivalent to 10-6 meters, 10-4 centimeters. System is η.
MICROPOROUS FILTRATION: Often used synonymously with the
terms “absolute filtration” and occasionally “screen filtration”,
microporous filters (or devices) have absolute ratings and will
“absolutely” remove contaminants larger than their rated pore
size, except for some types of bacteria that can “grow through”
the filter.
MIXED BED ION EXCHANGE: A demineralization process where the
anion and cation ion exchange resins are mixed in the same
vessel.
N
NANOFILTRATION (NF): A crossflow membrane separation process
which removes particles in the 300 to 1000 molecular weight
range, selected salts and most organics.
NEGATIVE PRESSURE: A pressure below that of the surrounding
atmospheric pressure at a specific point; a partial vacuum.
NEUTRALIZATION: The addition of either an acid or a base to a
solution as required to produce a neutral solution. The use of
alkaline or basic materials to neutralize the acidity of some
waters is a common practice in water conditioning.
O
OPERATING PRESSURE: The range of pressure, usually expressed
in pounds per square inch, over which a water system is
designed to function.
ORGANIC MATTER: Substances derived from plant or animal
matter, as opposed to inorganic matter derived from rocks and
minerals. Organic matter is characterized by its carbon-hydrogen
structure.
OSMOSIS: The diffusion of a solvent through a semi-permeable
membrane from a less concentrated solution to a more
concentrated solution.
OSMOTIC PRESSURE: The pressure required to prevent
spontaneous flow of water into a solution separated by a semipermeable membrane.
OXIDATION: A chemical process in which electrons are removed
from an atom, ion or compound. The addition of oxygen is a
specific form of oxidation. Combustion is an extremely rapid for
of oxidation, while the rusting of iron is a slow form.
OXIDIZING FILTERS: Filters that remove both iron and manganese
from the water. The units, also called iron removal filters, contain
a filter medium that has the ability of oxidizing and absorbing
dissolved iron and manganese. The filter is regenerated with
potassium permanganate and cleaned with backwashing. An
oxidizing filter can also consist of a tank where iron is oxidized
with air and the deposit is collected in a sand filter.
OZONE: An unstable form of oxygen (O3) that can be generated
by an electrical discharge through air or oxygen. A strong
oxidizing agent, ozone can be used to disinfect water systems.
P
pH: An expression of the acidity of a solution. The negative
logarithm of the hydrogen ion concentration. A pH of 1 is very
acidic; pH 7 is neutral; pH 14 is very basic.
PARTS PER MILLION: A measure of concentration. One part per
million of water is equivalent to 1 mg/liter of liquid. This is also
equivalent to 0.0584 grains/U.S. gallon. 17.1 ppm is equal to 1
grain per gallon.
PERACETIC ACID: A clear, colorless liquid with a pungent odor,
composed of hydrogen peroxide and acetic acid. Can be used
to sanitize water systems and cartridges.
PERMEATE: The portion of the feed stream that passes through
the membrane and emerges as purified water.
PERMEATOR: A name for an RO element or module. The unit that
contains the semi-permeable membrane, and is constructed to
allow the purified water to pass through the membrane, under
pressure, while leaving behind the reject portion.
PLUGGAGE TEST: Used synonymously with the terms “fouling
index” and “silt density index”. A test used to determine the
concentration of colloids and particles in tap water fed to an RO
or UF system. The test results can be used to determine the
effectiveness of pretreatment systems and/or the need for
pretreatment. Silt density index is also the best method to predict
fouling characteristics caused by undissolved contaminants.
POLISHING: Additional purification by RO, ion exchange, etc., to
produce exceptionally pure water.
POTABLE WATER: Water that is suitable for human consumption.
PRESSURE DIFFERENTIAL: The difference in pressure between
two points in a system caused by differences in elevation
and/or pressure drop due to flow.
Siemens
Water Technologies
BACK
251
GLOSSARY
PRODUCT: The treated (filtered, deionized, etc.) water from a
water purification system.
SAND FILTER: Packed bed of sand that can remove particles down
to 25 microns. Can be regenerated by backwashing.
PYROGEN: A substance or agent that, when introduced into the
blood stream of man or warm-blooded animals, produces fever.
Endotoxins produced from gram negative bacteria fall under this
definition. Pyrogens can be removed by RO and UF membranes.
SANITIZE: A process performed to reduce the number of bacteria.
R
RATED CAPACITY: The basis for calculating the period of time, or
number of gallons delivered by a water softener, deionizer or
filter, between regenerations or servicing, as determined under
specific test conditions.
RAW WATER: Untreated water from wells or from surface sources.
RECOVERY: Expressed in percent, recovery is the portion of the
RO feed water that is converted to product. Percent recovery is
calculated as follows: Product Flow X 100 = Percent Recovery
Feed Flow
REGENERATION: The chemical restoration of cation and anion
resins by treatment with acid and caustic respectively.
REJECT: The portion of the feed stream that does not pass
through the membrane to become permeate (purified), but is
retained by the membrane, and eventually passes to drain. This
water contains the bulk of the dissolved matter along with
particulates and microorganisms. Reject is used synonymously
with the terms concentrate, brine, retentate and waste.
REJECT DELTA P: The pressure differential between the
membrane feed pressure and reject pressure.
RESISTIVITY (OF WATER): The electrical measurement of the
water’s ability to resist the flow of electric current, and is
dependent on the temperature and total concentration of the
ionized substances in solution. The lower the level of ionized
substances, the higher the resistivity. Resistivity is the inverse of
conductivity, and is measured in megohms per centimeter.
REVERSE OSMOSIS (RO): The process by which a solution under
pressure (in excess of osmotic pressure) is forced through a semipermeable membrane from a more concentrated to a less
concentrated solution.
S
SALT PASSAGE: Expressed in percent, salt passage is the ratio of
salt concentration in the product water to salt concentration in
the RO feed water.
SALT REJECTION: Expressed in percent, salt rejection is the salt
concentration rejected by the RO membrane. Percent salt
rejection is calculated as follows:
% Salt Rejection = Conductivity of Feed - Conductivity of Permeate X 100
Conductivity of Feed
SCALE: The precipitate of sparingly soluble salts that forms on
surfaces in contact with water as a result of physical or
chemical change.
SEMI-PERMEABLE MEMBRANE: Usually a thin, membrane that will
allow the passage of some ions or materials while preventing
the passage of others.
SEPARATE BED ION EXCHANGE: A demineralization process where
the anion and cation exchange resins are in separate vessels, as
opposed to mixed bed ion exchange, where the anion and
cation resins are in the same vessel.
SEPARATION: The dividing of two or more types of resin by specific
gravity. Usually achieved by backwashing at a specified flow.
SILT DENSITY INDEX: A test used to determine the concentration of
colloids and particles in water fed to an RO or UF system. The test
results can be used to determine the effectiveness of pretreatment
systems and/or the need for pretreatment systems. Silt density
index is also the best method to predict fouling characteristics
caused by undissolved contaminants (fouling index).
SINGLE PASS: Refers to a single-pass RO system in which a
portion of the feed water to the system will pass one time
through an RO membrane to be purified.
SOFTENER: Ion-exchange device that removes hardness from
water by exchanging calcium and magnesium in the water for
sodium ions. The softener is regenerated with sodium chloride,
and the calcium and magnesium salts are rinsed to drain.
SOFT WATER: Any water that contains less than 1.0 gpg (17.1
mg/L) of hardness minerals, expressed as calcium carbonate.
SPIRAL WOUND RO CARTRIDGE: A cartridge that is constructed
with a sheet of open-structured support material “sandwiched”
between two sheets of RO membrane, wound spirally around a
perforated, PVC core. As the untreated water (feed) flows
through the support material, purified water permeates the
layers of the membrane into the core, where is is extracted as
permeate. The bulk of dissolved ions and particles are rejected,
and diverted to drain.
STERILIZE: To kill or destroy all microorganisms.
SURFACTANT (SURFACE-ACTIVE AGENT): The material in a soap or
detergent formulation that promotes the loosening of the soil
from surfaces and the suspension of many soils. The actual
cleaning agent in soaps and detergents.
SUSPENSION: Foreign particles carried in a liquid but not
dissolved in it, like rusty iron in water.
Siemens
Water Technologies
BACK
GLOSSARY
252
SWELLING: The expansion of certain ion exchange resins when
converted into specific ionic states.
T
TANGENTIAL FLOW: Action whereby the untreated water (feed)
flow is directed across the surface of the membrane. This
“sweeping” action helps keep material retained by the membrane
from settling, and eventually restricting, permeate flow.
TEMPERATURE CORRECTION FACTOR: The factor by which the
water system productivity (RO or UF) would be reduced (or
increased) due to changes in water temperature. Water viscosity
changes with changes in temperature, and therefore the rate at
which it will pass through a membrane, will change accordingly.
As a rule of thumb, the system productivity may be decreased by
about 2 percent per °C decrease in temperature.
THROUGHPUT: The total volume of fluid processed through the
filters before membrane fouling occurs. Throughput is measured
in liters of filtrate produced.
TOTAL CHLORINE: The total concentration of chlorine in a water
sample, including combined and free chlorine.
TOTAL DISSOLVED SOLIDS (TDS): The total of all dissolved matter
(both organic and inorganic) present in a water sample.
TOTAL HARDNESS: The sum of all hardness constituents in a water
sample, expressed as their equivalent concentration of calcium
carbonate. Hardness is caused primarily by calcium and
magnesium, but may also include small amounts of metals such
as iron which act like calcium and magnesium in certain reactions.
TOTAL ORGANIC CARBON (TOC): One method for determining the
organic content of a water sample (from approximately 10 ppb to
thousands of ppm). In this method the organic matter is oxidized
to carbon dioxide, which is then measured by one of several
sensitive electronic detectors. Other methods of determining the
organic content in a water sample include Chemical Oxygen
Demand (COD), Ultraviolet Spectrophotometr y, Gas
Chromatography and Mass Spectrometry.
TOTAL SOLIDS: The weight of all solids, dissolved and
suspended, organic and inorganic, per unit of water.
TRANSMEMBRANE PRESSURE: Short for transmembrane
differential pressure. The difference between the feed pressure
applied to the upstream as compared to that of the feed
pressure on the downstream (permeate) side of the membrane.
Transmembrane pressure is essentially the “net driving force”
that determines “flux”. Transmembrane pressure is calculated as
follows:
Feed Pressure
= 250 psi
= 50 psi
–Permeate Pressure
Transmembrane Pressure= 200 psi
TURBIDITY: A term used to define the physical appearance or
cloudiness of water. Expressed in NTUs, turbidity is determined
by how much undissolved material, such as clay, silt or sand is
present in water.
TWO PASS: Refers to a two-pass RO system in which a portion of
the feed water to the system will pass through two RO
membranes to be purified.
U
ULTRAFILTRATION: A filtration process using membrane filter
material to retain undissolved and dissolved contaminants that
are larger than the nominal molecular weight cutoff rating of
the membrane (typically 5,000-500,000 daltons). Essentially a
molecular sieve. Ultrafiltration systems use this process to
dramatically reduce contaminants not removed by microporous
filtration, such as large molecular weight organics, colloids,
bacteria, and particles smaller than the absolute ratings of
“microporous” or “absolute” filters. Ultrafiltration differs from
reverse osmosis as a process in that it typically will not remove
dissolved salts.
ULTRAVIOLET STERILIZATION: Using ultraviolet (UV) radiation to
kill or inhibit bacteria and viruses.
UPFLOW: The operation of an ion exchange unit in which
solutions are passed in at the bottom and out at the top of the
vessel.
USP: United States Pharmacopoeia. Publishes standards for
water for injection (pharmaceutical) and purified water.
V
VIRUS: An infective agent smaller than a common bacterium.
Requires living cells for multiplication.
VISCOSITY: The resistance of fluids to flow, due to internal forces
and friction between molecules.
W
WFI: Abbreviation for “water for injection”. Used in preparing
injectable pharmaceuticals, WFI must be pyrogen-free.
Z
ZEOLITE: A group of natural or synthetic hydrated aluminum
silicates with ion exchange properties.
Siemens
Water Technologies
BACK
TRADEMARK STATEMENT
253
APEX. AquaCarb, Arrowhead, AVGF, BevMAX, CDI, CDI-LX, CHEM-AD, Chemtube, Continental,
Depolox, DI Gard, DI-SDI Alert, EPV, FlexTrex, FlexRO, High Resolution Redox, Ionpure, IWT,
KISCO, LiquiPure, MED-RO, MEDICA, Membrane Care, Midas, MODULAB, Penfield, Permutit,
PreFlex, Prepure DP, PreVUE, PolyBlend, Postpure PP, PureFit, ROGARD, Stranco, Strantrol, TotalCheck, Vantage, VoCarb, Wallace & Tiernan, USF, Westates and WinCPD are trademarks of
Siemens, its subsidiaries or affiliates.
Santoprene is a trademark of Advanced Elastomer Systems, LP
ANSI is a trademark of the American National Standards Institute
ASME is a trademark of the American Society of Mechanical Engineers
ASTM is a trademark of the American Society for Testing and Materials
ATCC is a trademark of the American Type Culture Collection
AWWA is a trademark of the American Water Works Association
Aquafine and Aqualogic 2000 are trademarks of Aquafine Corporation
Barnstead, B-pure, E-pure, G-pure, Diamond, EASYpure NANOpure, NANOpure Infinity,
ORGANICfree, ROpure and ULTROpure are trademarks of Barnstead/Thermolyne Corporation
CLSI is a trademark of the Clinical Laboratory and Standard Institute
Dow, Dowex, Dowex Marathon and Monosphere are trademarks of Dow Chemical Company
Viton is a trademark of DuPont Performance Elastomers LLC
Teflon is a trademark of E.I. du Pont de Nemours & Company
CENTRA, MEDICA and PURELAB are trademarks of ELGA LabWater
FILMTEC is a trademark of FilmTec Corporation
CoLD and Nexis are trademarks of Filterite Corporation
E-Cell is a trademark of GE Water Technologies, Inc.
Grundfos is a trademark of Grundfoss Bjerringbro Pumpefabrik A/S Corporation
Anatel and Hach are trademarks of Hach Company
Hydranautics is a trademark of Hydranautics Corporation
Actiflo is a trademark of Kruger, Inc.
Lewatit and MonoPlus are trademarks of Lanxess Deutschland GmbH
LMI is a trademark of Liquid Metronics Incorporated
AFS, Alpha-Q, AFS, Milli-Q, Milli-RO, Millipore and Super-Q are trademarks of Millipore
Corporation
Diaion is a trademark of Mitsubishi Chemical Corporation
Ultrameter is a trademark of Myron L. Company
Thio-Bag and Whirl-Pak are trademarks of NASCO
NEMA is a trademark of the National Electrical Manufacturers Association
Propor is a trademark of Parker Domnick Hunter
Clerify is a trademark of Pentair Filtration, Inc.
Chem-Tech, Chem-Tech Prime Performance, IntelliScan, IntelliSense, MICROtrac, PULSAtrol and
PULSAtron are trademarks of Pulsafeeder Inc., a unit of IDEX Corporation
Purolite is a trademark of The Purolite Company
Allen-Bradley is a trademark of Rockwell Automation, Inc.
Amberjet and Amberlite are trademarks of Rohm & Haas
Fluran is a trademark of Saint-Gobain Performance Plastics
Ionac is a trademark of Sybron Chemicals, Inc.
Terrapure is a trademark of Terracon Corporation
Trisep is a trademark of TriSep Corporation
cUL and UL are trademarks of Underwriters Laboratories, Inc.
USP is a trademark of The United States Pharmacopeial Convention
Victaulic is a trademark of Victaulic Company
Siemens
Water Technologies
BACK
For more information contact:
Siemens
Water Technologies
10 Technology Drive
Lowell, MA 01851
North America and Canada
800.875.7873 ext. 5000 Technical Support
800.466.7873 Customer Service
tech.support.water@siemens.com
Information Desk
800.525.0658 Toll Free
+724.772.1402 International
information.water@siemens.com
www.siemens.com/water
The information provided in this catalog contains merely general descriptions or
characteristics of performance which in actual case of use do not always apply as
described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly
agreed in the terms of the contract.
©2007 Siemens Water Technologies Corp.
All Rights Reserved
CO-BLUE-CAT-0307
Subject to change without prior notice.

Water Technologies Water Purification Products and

Transcription

Similar documents

Model Octave - Master Meter

1" Impact Wrench - Racine Railroad

Medicator Specifications

Siemens TransformHUV Mexico

Reverse Osmosis - H2O Innovation

Deck Blaster and Grate Cleaner

ScaleNet® Commercial Water Treatment Systems

seisco quick guide - radiant floor heat

Siemens new home builder options