aatc rivet squeezers

Transcription

Atlantic
Air
Tool
Company, Inc.
P.O. Box 38
1112 Old Railroad Bed Road
Taft, Tennessee 38488
Telephone: (931) 425-6882 or 6883
Fax: (931) 425-6884
Email: staff@atlanticairtool.com
Visit our web site @ www.atlanticairtool.com
WELCOME TO
ATLANTIC AIR TOOL COMPANY, INC.
Atlantic Air Tool Pneumatic Compression Riveting Tools and Accessories are designed, fabricated and
manufactured under strict quality control. Insuring precise and exceptional performance. All Portable
Pneumatic Tools are equipped with Safety Backheads.
ALL PRESSURES ARE LOAD CELL TESTED NOT CALCULATED!
PAGE
A SQUEEZERS
PAGE PEDESTAL MOUNT BRACKETS
30A / 30AH
30A / 30AH Parts Breakdown
60A / 60AH
60A / 60AH Parts Breakdown
90A
90A Parts Breakdown
630A
630A Parts Breakdown
444A
444A Parts Breakdown
1
2
3
4
5
6
7
8
9
10,11
PEDESTAL STANDS
15000 PEDESTAL
15010 PEDESTAL
SPECIAL YOKE AND JAWS
Standard and Designed Specials
C SQUEEZERS
30C / 30CH
30C / 30CH Parts Breakdown
60C / 60CH
60C / 60CH Parts Breakdown
90C
90C Parts Breakdown
444C
444C Parts Breakdown
AATC #53 for the 60A
AATC #52 for the 90A, 630A
AATC #498 for the 444A
12
13
14
15
16
17
18
19, 20
BENCH SQUEEZERS
30C/ 30CH Compression Bench Riveter
30C/ 30CH Bench Riveter Parts Breakdown
60C/ 60CH Compression Bench Riveter
60C/ 60CH Bench Riveter Parts Breakdown
90C Compression Bench Riveter
90C Bench Riveter Parts Breakdown
444CB Compression Bench Riveter
444CB Bench Riveter Parts Breakdown
458CB Compression Riveter
444AB Compression Bench Riveter
444AB Bench Riveter Parts Breakdown
21
22
23
24
25
26
27
28
29
30
31
SET HOLDERS
3/8 Diameter
7/16 Diameter 2 9/16 - 4 1/2
7/16 Diameter 4 9/16 - 6 7/16
Adjustable ONE YEAR WARRANTY
32
32
32
PAGE
33
33
PAGE
34
PAGE
35
36
37
38
Atlantic Air Tool Company, Inc. warrants to the original
user the products manufactured by AATC to be free
of defects in material and workmanship for a period of
one year from date of purchase.
90A Power Unit requires heavy-duty bearings.
Installation of Jaws without AATC heavy-duty bearings
voids this warranty.
Tools should be returned postage prepaid and we will
repair or replace any parts found defective in material
and workmanship.
Misused, abused, modified, improperly maintained
tools, or repairs made to tools manufactured by AATC
voids this warranty.
All applicable requirements of OSHA regulations can
be met by AATC Tools listed in this catalog.
All Tools Manufactured in the U.S.A.
Atlantic Air Tool Company, Inc.
Phone: (931) 425-6882
Fax (931) 425-6884
Web: www.atlanticairtool.com
Our Office Hours are 8 AM to 4 PM Mon. thru Fri. Central Standard Time
ATLANTIC AIR TOOL COMPANY
30A / 30AH
Shown Here Is The 30A22HD
RIVET
CAPACITY
DIAMETER
INCHES
AIR PRESSURE
(kn)
(mm)
(mm)
MOVING JAW
STROKE
MAX
AT MAX
TRAVEL
POWER
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
(mm)
INCHES
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
MODEL NO.
Alum.
Steel
REACH
Closed Ht.
30A15HD
1/8
(3.17)
3/32
(2.36)
1 1/2
(38.1)
7/8
(22.2)
3000
(13.35)
5/8
(15.8)
1/16
(1.57)
9 1/4
(234.9)
4
(1.8)
30A22HD
3/32
(2.36)
3/32
(2.36)
2 1/4
(57.15)
7/8
(22.2)
2400
(10.68)
7/8
(22.2)
3/32
(2.36)
10
(254)
4 1/2
(2.04)
30A30HD
3/32
(2.36)
1/16
(1.57)
3
(76.2)
7/8
(22.2)
1800
(8.01)
1 1/4
(31.75)
1/8
(3.17)
10 3/4
(273)
5
(2.26)
30AH15HD
5/32
(3.96)
1/8
(3.17)
1 1/2
(38.1)
7/8
(22.2)
3900
(17.35)
5/8
(15.8)
3/64
(3.19)
9 1/4
(234.9)
4
(1/8)
30AH22HD
1/8
(3.17)
3/32
(2.36)
2 1/4
(57.15)
7/8
(22.2)
3000
(13.35)
7/8
(22.2)
1/16
(1.57)
10
(254)
4 1/2
(2.04)
30AH30HD
3/32
(2.36)
1/16
(1.57)
3
(76.2)
7/8
(22.2)
2400
(10.68)
1 1/4
(31.75)
3/32
(2.36)
10 3/4
(273)
5
(2.26)
(mm)
*All pressures are load cell tested not calculated.
JAWS
A
B
3”
3
2
”
1/4
1 1/2”
C
7/8
2
1/8
1/4
7/8
1
7/8
1 1/2
7/8
1 1/2
2
D
E
2
1/8
9/32
2
1/8
9/32
1 5/8
9/32
F
G
H
I
13/32
5
1
1/4
5/8
5
1
1/4
5/8
5
5/8
4 1/16
1
4 3/4
1/16
3 13/16
Atlantic Air Tool Company
Taft, Tennessee
H
I
C
D
B G
F
(931) 425-6882 • FAX (931) 425-6884
A
Visit Our Website: www.atlanticairtool.com
1
E
45
11
32
10
36
37/08
29
39
221
82-218
BEARING ASSY 109
75
38
49
11
48
81
30A ONLY
98
55
83
102
73
76
47
(Typical
6 Places)
30
79
74
MOVEABLE JAWS
A15MHD
A22MHD
A30MHD
56
57
33
STATIONARY JAWS
A15S
A22S
A30S
46
34
60
05
85
07 05
28
05
06
100
71
35
06
103
92
93
93
54
60
07
58
94
05
122
03
95
96
ROLLER ASSY 231
AATC
MODEL
30A-30AH
ATLANTIC
AIR TOOL COMPANY, INC.
COMPRESSION RIVETER
Maximum
Air Pressure 90 Psi
30A
/ Safety
30AH
COMPRESSION
RIVETER
Our Tool is furnished
with
Backhead
AATC PART #
03
05
06
07
08
10
11
28
29
30
32
33
34
35
36
37
38
39
45
46
47
48
49
54
55
56
57
58
60
71
73
74
75
76
79
DESCRIPTION
AATC PART #
Roller Shaft, Short 81
Roller Thrust Washer (4) 82
Needle Roller (40) 83
Roller Plate (2)
85
Piston Fork (30AH) 92
Needle Roller (40) 93
Piston Return Spring (2)(30 Series) 94
Guard Screw
95
Bearing Inner Race 96
Pivot Bearing
98
Outer Race End Bearing 100
Piston Rod Nut
Piston Leather Plate 102
Piston Leather 103
Piston
109
Piston Fork (30A) Wedge Spacer Rivet
122
Wedge Spacer
Throttle Valve Lever
218
Cylinder Head Gasket
221
Allen Cap Screw (6)
231
Lever Arm Screw
Roller Shaft, Long
Throttle Valve Bushing
Cylinder Head
Throttle Valve
“O” Ring
Retainer Ring (2)
Throttle Valve Spring
Return Spring Pin
Bearing Bolt
Bearing Bolt Nut
Bearing Bolt Washer
End Roller Bearing Shaft
2
DESCRIPTION
“O” Ring (Brass Bushing)
Wedge Short “A”
Cylinder
Stationary Jaw Roller Guard
Swivel
O-Ring (2)
O-Ring
Swivel Nut
Elbow
Spring
Plate Roller Assembly (2)
(Includes 2-#05, 20-#06, 1-#07)
Lever Arm Assembly
Head Assembly
Moving Jaw Bearing Assembly
(Includes 1-#32, 40-#10, 1-#29)
Swivel Assembly
(Includes 1-#92, 2-#93, 1-#94, 1-#95, 1-#96)
Wedge Short “A”, H.P. (30AH)
Return Spring, Heavy-Duty
Roller Assembly
(Includes 2-#100, 1-#54, 1-#03, 2-#60)
60A / 60AH
Shown Here Is The 60A15HD
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
(mm)
(mm)
MODEL NO. Alum.
MOVING JAW
STROKE
MAX
AT MAX
TRAVEL
POWER
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
AIR PRESSURE
(kn)
OVERALL
LENGTH
INCHES
(mm)
(kgs)
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
Steel
REACH
Closed Ht.
60A15HD
3/16
(4.75)
5/32
(3.96)
1 1/2
(38.1)
7/8
(22.2)
6000
(26.70)
5/8
(15.8)
1/16
(1.57)
12
(304.8)
5 1/2
(2.49)
60A22HD
3/16
(4.75)
1/8
(3.17)
2 1/4
(57.15)
7/8
(22.2)
4600
(20.47)
7/8
(22.2)
3/32
(2.36)
12 3/4
(323.85)
5 1/2
(2.49)
60A30HD
5/32
(3.96)
3/32
(2.36)
3
(76.2)
7/8
(22.2)
3400
(15.13)
1 1/4
(31.75)
1/8
(3.17)
13 1/2
(342.9)
6
(2.72)
60AH15HD
3/16
(4.75)
5/32
(3.96)
1 1/2
(38.1)
7/8
(22.2)
7200
(32.03)
5/8
(15.8)
3/64
(1.19)
12
(304.8)
5 1/2
(2.49)
60AH22HD
3/16
(4.75)
1/8
(3.17)
2 1/4
(57.15)
7/8
(22.2)
5300
(23.58)
7/8
(22.2)
1/16
(1.57)
12 3/4
(323.85)
5 1/2
(2.49)
60AH30HD
5/32
(3.96)
1/8
(3.17)
3
(76.2)
7/8
(22.2)
4000
(17.79)
1 1/4
(31.75)
3/32
(2.36)
13 1/2
(342.9)
6
(2.72)
(mm)
JAWS
A
B
C
D
E
F
G
H
I
3”
3
7/8
2 1/8
2 1/8
9/32
1 1/4
5/8
5 13/32
5
2 1/4”
2 1/4
7/8
1 7/8
2 1/8
9/32
1 1/4
5/8
5 1/16
4 3/4
1 1/2”
1 1/2
7/8
1 1/2
1 5/8
9/32
1
5/8
4 1/16
3 13/16
Taft, Tennessee
H
I
C
D
B G
F
(931) 425-6882 • FAX (931) 425-6884
A
3
E
FOR 60A
60 05
06
FOR 60AH
60 97
09
05
54
05
31
07
97
100
06
60
07
05
36
03
45
54
97
107
09
31
97
08
ROLLER ASSY 231
60
117
03
90/218
38
49
ROLLER ASSY 230
32
117
221
10
75
29
48
102
55
98
76
91
73
BEARING ASSY 109
47
(Typical
6 Places)
46
79
30
81
74
56
MOVEABLE JAWS
33
34
A15MHD
A22MHD
A30MHD
57
58
71
35
103
50
STATIONARY JAWS
A15S
A22S
A30S
92
93
93
44
85
40
28
89
20
94
19
44
122
95
96
34
35
AATC
MODEL 60A-60AH
ATLANTIC
TOOL COMPANY, INC.
COMPRESSIONAIR
RIVETER
Our Tool is60A
furnished
with Safety
Backhead
Maximum
Air Pressure 90 Psi
/ 60AH
COMPRESSION
RIVETER
AATC PART # DESCRIPTION
03
05
06
07
08
09
10
19
20
28
29
30
31
32
33
34
35
36
38
40
44
45
46
47
48
49
50
54
55
56
57
58
60
71
73
Roller Shaft, Short
Thrust Washer (4)
Needle Roller (40)
Stationary Roller Plate (2)
Piston Fork
Needle Roller 60AH (40)
Needle Roller (40)
“O” Ring
“O” Ring
Guard Screw
Bearing, Inner Race
Pivot Bearing
Stationary Roller Plate (2) 60AH
Outer Race End Bearing
Piston Rod Nut
Piston Leather Plate (2)
Piston Leather (2)
Piston
Wedge Spacer Rivet
Separator
Retaining Ring (2)
Allen Cap Screw (6)
Lever Arm
Screw
Tandem Piston
Roller Shaft, Long
Cylinder Head
Throttle Valve
“O” Ring
Retainer Ring (2)
Return Spring Pin
AATC PART #
DESCRIPTION
74
75
76
79
81
85
89
90
91
92
93
94
95
96
97
98
100
Bearing Bolt
Bearing Bolt Nut
Bearing Bolt Washer
“O” Ring
Piston Rod
Wedge Long “A” 60A Only
Cylinder
Swivel
“O” Ring (2)
“O” Ring
Swivel Nut
Elbow
Thrust Washer (4)
Spring
102
103
107
Lever Arm Assembly
Head Assembly
109
117
122
218
221
230
231
(Includes 1-#07, 2-#05, 20-#06)
(Includes 1-#31, 20-#09, 2-#97)
Moving Jaw End Bearing Assembly
(Includes 1-#32, 40-#10, 1-#29)
Piston Return Spring (2)
Swivel Assembly
(Includes 1-#92, 2-#93, 1-#94, 1-#95, 1-#96)
High Performance Long “A” Wedge
Roller Assembly For 60 AH
(Includes 2-#107, 1-#54, 1-#03, 2-#60)
Roller Assembly
(Includes 2-#100, 1-#54, 1-#03, 2-#60)
* A15MHD, A22MHD, A30MHD ALLIGATOR JAWS COME EQUIPPED WITH HEAVY-DUTY BEARINGS.
4
Atlantic Air Tool
Co., Inc.
90A
Shown Here Is The 90A30
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
(mm)
(mm)
MOVING JAW
STROKE
MAX
AT MAX
TRAVEL
POWER
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
AIR PRESSURE
(kn)
OVERALL
LENGTH
INCHES
(mm)
(kgs)
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
MODEL NO.
Alum.
Steel
REACH
Closed Ht.
90A15
1/4
(6.35)
3/16
(4.75)
1 1/2
(38.1)
7/8
(22.2)
9000
(40.05)
5/8
(15.8)
1/16
(1.57)
16
(406.4)
7
(3.17)
90A22
3/16
(4.75)
5/32
(3.96)
2 1/4
(57.15)
7/8
(22.2)
7000
(31.15)
7/8
(22.2)
3/32
(2.36)
16 3/4
(425.45)
7 1/2
(3.4)
90A30
3/16
(4.75)
5/32
(3.96)
3
(76.2)
7/8
(22.2)
5200
(23.14)
1 1/4
(31.75)
1/8
(3.17)
17 1/2
(444.5)
8
(3.62)
(mm)
JAWS
A
B
C
D
E
F
G
3”
3
7/8
2 1/8
2 1/8
9/32
1 1/4
5/8
H
I
13/32
5
5
2 1/4”
2 1/4
7/8
1 7/8
2 1/8
9/32
1 1/4
5/8
5 1/16
4 3/4
1 1/2”
1 1/2
7/8
1 1/2
1 5/8
9/32
1
5/8
4 1/16
3 13/16
Taft, Tennessee
H
I
C
D
B G
F
(931) 425-6882 • FAX (931) 425-6884
A
5
E
97 09
97
09
31
31
36
97
60
54
97
72
60
08
03
107
32
10
38
90
117
ROLLER ASSY 230
117
221
29
75
76
BEARING ASSY 109
30
49
99
73
48
81
79
74
MOVEABLE JAW
55
51
A15MHD
A22MHD
A30MHD
98
34
47
(Typical
6 Places)
35
50
STATIONARY JAW
A15S
A22S
A30S
102
44
85
40
28
56
57
20
33
19
46
34
44
89
58
71
35
103
50
34
44
35
92
93
93
20
19
AATC
MODEL 90A
COMPRESSION RIVETER
40
94
44
122
95
96
Our Tool is furnished with Safety Backhead
Maximum Air Pressure 90 Psi
90A COMPRESSION RIVETER
03
08
09
10
19
20
28
29
30
31
32
33
34
35
36
38
40
44
46
47
48
49
50
51
54
55
56
57
58
60
71
72
73
74
75
Roller Shaft, Short
Piston Fork
Needle Roller (40)
Needle Roller (40)
“O” Ring “O” Ring Guard Screw Bearing, Inner Race Center Bearing
Stationary Roller Plate(2)
Piston Rod Nut
Piston Leather Plate Piston Leather (3)
Piston Wedge Spacer Rivet Separator Retaining Ring (4)
Allen Cap Screw (6) Lever Arm
Screw Tandem Piston (2)
Piston Rod
Roller Shaft, Long
Cylinder Head
Throttle Valve “O” Ring
Retainer Ring (2)
Return Spring Pin
Bearing Bolt
Bearing Bolt Nut
76
79
81
85
89
90
92
93
94
95
96
97
98
99
102
103
107
109
117
122
221
230
Bearing Bolt Washer
“O” Ring
Piston Rod
Wedge Long “A”
Swivel
“O” Ring (2)
“O” Ring
Swivel Nut
Elbow
Thrust Washer (4)
Spring Cylinder
Lever Arm Assembly
Head Asssembly
(Includes 1-#31, 20-#09, 2-#97)
Moving Jaw Bearing Assembly
(Includes 1-#32, 40-#10, 1-#29)
Swivel Assembly
(Includes 1-#92, 2-#93, 1-#94, 1-#95, 1-#96)
Roller Assembly For 90A
(Includes 2-#107, 1-#54, 1-#03, 2-#60)
NOTE
Due to very high squeezing pressures developed by this tool, use
Alligator Jaws equipped with heavy duty bearings only. The use
of standard bearings will cause damage to the tool and possible
injury to the operator.
* A15HD, A22HD, A30HD ALLIGATOR JAWS COME EQUIPPED WITH HEAVY-DUTY BEARINGS.
6
Atlantic Air Tool Co., Inc.
630A
Shown Here Is The 630A-1527
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
(mm)
(mm)
MOVING JAW
MAX FORCE
w/90 PSI
(6.21 Bar)
AIR PRESSURE
(kn)
MAX
TRAVEL
INCHES
(mm)
STROKE
AT MAX
POWER
INCHES
(mm)
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
MODEL NO.
Alum.
Steel
REACH
630A-1526
9/32
(7.1)
7/32
(5.5)
3
(76.2)
7/8
(22.2)
10,900
(48.49)
1 3/16
(30.16)
5/64
(1.95)
19 3/4
(501.6)
11 1/2
(5.2)
630A-1527
1/4
(6.4)
3/16
(4.8)
5”
(127)
7/8
(22.2)
5,900
(26.24)
1 3/8
(35)
1/8
(3.15)
21 3/4
(552.4)
12
(5.5)
630A-1528
3/16
(4.8)
1/8
(3.2)
7”
(178)
7/8
(22.2)
4,700
(20.90)
1 13/16
(46)
5/32
(3.95)
23 3/4
(603.2)
12 1/2
(5.7)
Closed Ht.
JAWS
A
B
C
D
E
F
G
1526
3”
7/8
1 5/8
2 1/4
9/32
1 1/8
7/16
8
1527
5”
7/8
2”
2 9/32
9/32
1 1/8
7/16
6 1/4
6”
1528
7”
7/8
2
9/32
1
7/16
7
7 1/4
2
3/8
1/4
1/8
H
I
7/8
1/2
5 5/8
Taft, Tennessee
H
I
C
D
B G
F
(931) 425-6882 • FAX (931) 425-6884
A
7
E
36
117
72
605
10
08
38
604
602
BEARING ASSY 607
97
97
09
09
603
117
609
603
97
606
60
97
54
60
75
601
76
03
49
48
73
608
102
81
74
MOVEABLE JAW
55
51
98
79
34
47
(Typical
6 Places)
35
30
50
STATIONARY JAW
44
40
56
57
20
33
19
89
46
34
44
58
71
35
103
50
34
44
35
92
20
19
AATC
MODEL 630A
COMPRESSION RIVETER
40
93
94
44
122
95
96
AATC PART #
03
08
09
10
19
20
30
33
34
35
36
38
40
44
46
47
48
49
50
51
54
55
56
57
58
60
71
72
73
74
75
76
79
81
89
92
Air Pressure 90 Psi
630A COMPRESSION Maximum
RIVETER
DESCRIPTION
ROLLER SHAFT
PISTON FORK/ SHORT
NEEDLE ROLLER
NEEDLE ROLLER END BEARING
“O” RING
“O” RING
PIVOT BEARING
PISTON ROD NUT
PISTON LEATHER PLATE
PISTON LEATHER
PISTON
WEDGE SPACER RIVET
SEPARATOR
RETAINING RING
CYLINDER HEAD GASKET
ALLEN CAP SCREW
LEVER ARM
SCREW
TANDEM PISTON
PISTON ROD
ROLLER SHAFT, LONG
THROTTLE VALVE BUSHING
CYLINDER HEAD
THROTTLE VALVE
“O” RING
RETAINER RING (2)
THROTTLE VALVE SPRING
THROTTLE VALVE LEVER
RETURN SPRING PIN
BEARING BOLT
BEARING BOLT NUT
BEARING BOLT WASHER
END ROLLER BEARING SHAFT
“O” RING (BRASS BUSHING)
PISTON ROD
SWIVEL
AATC PART #
93
94
95
96
97
98
102
103
117
122
601
602
603
604
605
606
607
DESCRIPTION
“O” RING (SWIVEL)
“O” RING (SWIVEL NUT)
SWIVEL NUT
ELBOW
THRUST WASHER
SPRING
LEVER ARM ASSEMBLY
HEAD ASSEMBLY
PISTON RETURN SPRING
SWIVEL ASSEMBLY
(Includes 1-# 92, 1-#93, 1-#94, 1-#95, 1-#96)
CYLINDER
WEDGE
PLATE ROLLER BEARING
INNER RACE END BEARING
OUTER RACE END BEARING
RETURN SPRING (2 ea. Required)
END BEARING ASSEMBLY
(Includes 1-#605, 50-#10, 1-#604)
608
PLATE ROLLER BEARING ASSEMBLY
609
PLATE ROLLER BEARING ASSEMBLY
8
(Includes 1-#603, 2-#97, 1-#03, 20-#09)
(Includes 2-#97, 20-#09, 1-#603, 2-#60, 1-#54)
444A
Shown Here Is The 444AFH32
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
(mm)
PSI
(mm)
MOVING JAW
AIR PRESSURE
MAX
TRAVEL
INCHES
(mm)
STROKE
AT MAX
POWER
INCHES
(mm)
(kn)
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
MODEL NO.
Alum.
Steel
REACH
444AFH32
9/32
(7.14)
7/32
(5.56)
3 1/4”
(82.5)
7/8
(22.2)
9,800
(43.61)
1
(25.4)
1/8
(3.2)
22.5
(571)
14.5
(6.78)
444AFH52
1/4
(6.35)
3/16
(4.76)
5 1/4”
(133.3)
7/8
(22.2)
6,800
(30.25)
1 15/32
(37.4)
3/16
(4.75)
24 1/2
(622)
16
(7.26)
444AFH72
3/16
(4.76
5/32
(3.97)
7 1/4
(184.1)
7/8
(22.2)
6000**
(26.7)
1 31/32
(49.9)
7/32
(5.6)
26.5
(673)
17.5
(7.94)
444AFH92
3/16
(4.76)
5/32
(3.97)
9 1/8
(231.7)
7/8
(22.2)
6000***
(26.7)
2 7/16
(61.8)
15/64
(6)
28.5
(724)
21.5
(9.8)
444ASH32
9/32
(7.14)
7/32
(5.56)
3 1/4
(82.5)
7/8
(22.2)
9,800
(43.61)
1
(25.4)
1/8
(3.2)
22.5
(571)
15.5
(7.03)
444ASH52
1/4
(6.35)
3/16
(4.76)
5 1/4
(133.3)
7/8
(22.2)
6800
(30.25)
1 15/32
(37.4)
3/16
(4.75)
24.5
(622)
17
(7.71)
444ASH72
3/16
(4.76)
5/32
(3.97)
7 1/4
(184.1)
7/8
(22.2)
6000**
(26.7)
1 31/32
(49.9)
7/32
(5.6
26.5
(673)
18.5
(8.39)
444ASH92
3/16
(4.76)
5/32
(3.97)
9 1/8
(231.7)
7/8
(22.2)
6000***
(26.7)
2 7/16
(61.8)
15/64
(6)
28.5
(724)
22.5
(10.2)
Closed Ht.
JAWS
A
B
C
D
E
F
G
H
I
A 32
3 1/4
7/8
2
2 7/32
1/4
1 7/64
7/16
6 3/16
6 3/16
A 52
5 1/4
7/8
2 1/4
2 1/8
9/32
1 1/16
7/16
6 1/2
6 1/2
A 72
7 1/4
7/8
2 5/16
1 5/8
9/32
1 1/16
7/16
7 15/16
7 3/4
A 92
9 1/8
7/8
3 7/16
2 1/8
9/32
1 1/16
7/16
9 7/16
9 1/8
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
9
H
I
C
D
B G
F
A
E
BEARING SHAFT ASSEMBLY
478
497
432
470
409
429
497
471
(7-1/4 x 9-1/8)
MOVING JAW
491
473
479
430
460
PLATE ROLLER ASSEMBLY
477
(2 Required Per Tool)
447
460
405
431
409
475
454
476
405
STATIONARY JAW
454
460
460
474
AATC
444 SERIES
("A" UNIT)
435
443
439
439
419
444
442R
433
420
440
443
499
444
434
435
450
436
451
442L
WEDGE NUMBER
441---C UNIT
441--- 3-1/4+5-1/4 ALL JAW
482---7-1/4 ALL JAW **
490---9-1/8 ALL JAW ***
405
409
429
430
431
432
447
454
460
470
471
473
474
475
476
477
478
479
491
497
Thrust Washer
Needle Roller
Inner Race
Pivot Bearing
Stationary Roller
Outer Bearing Race
Screw
Stationary Roller Shaft
Retaining Ring (4 Req.)
Return Spring
Spring/Back Up
Return Spring Pin
Pivot Bearing Bolt
Pivot Bearing Bolt Nut
Pivot Bearing Bolt Washer
Plate Roller Assembly (2 Req.)
End Bearing Assembly
Bearing Shaft
“A” Adaptor
Thrust Washer
444 SERIES POWER UNIT
408
438
434
436
(See Chart Below)
444 SERIES “A” UNIT
AATC
444 SERIES
(POWER UNIT)
10
408 Wedge Connector
419 “O” Ring
420 “O” Ring
433 Piston Rod Nut
434 Piston Leather Plate
435 Piston Leather
436 Piston
438 Pin
439 Retaining Ring (2 Req.)
Manufacturers of Quality Air Tools
440 Separator
441 Wedge
1112 Old Railroad Bed RD.
P.O. Box 38 442L Spring (Need One Of Each) (931) 425-6882
Tennessee
38488
442R Spring (Need One Of Each)FAX (931) 425-6884
Taft,
443 Spring Washer (2 Email:
Req.) staff@atlanticairtool.com
Web Address: www.atlanticairtool.com
NOTE: (443 Is only used in tools manufactured before 2015)
444
450
451
499
Spring Guide
Piston Rod
Cylinder (Swivel Head) ATLANTIC AIR TOOL COMPANY, INC.
444 SERIES FIXED HEAD ASSEMBLY
449
445
411
463
448
411
462
412 484
456
484
424
446
(TYP 2 PLACES)
484
447
(TYP 4 PLACES)
461
458
71
492
AATC
444 SERIES
(FIXED HEAD
ASSEMBLY)
93
94
59
421
96
59
71
93
94
96
411
412
421
424
445
446
447
448
449
456
458
461
462
463
484
492
Swivel Nut
“O” Ring
“O” Ring
Elbow
Shim (2 Req.)
Nut (2 Req.)
Cylinder (Fixed Head And Bench)
Screw (2 Req.)
Handle
Screw (4 Req.)
Throttle Valve Lever Pin
Fixed Cylinder Head
“O” Ring
Valve
Valve Bushing
“O” Ring
Washer (4 Req.)
Swivel
444 SERIES SWIVEL HEAD ASSEMBLY
449
445
495
493
411
481
448
485
(3 Required)
463
411
462
488
487
486
484
493
424
464
424
484
469
461
AATC PART #
DESCRIPTION
59 Swivel Nut
71 Throttle Valve Spring
93 “O” Ring
94 “O” Ring
96 Elbow
411 Shim (2 Req.)
424 Screw (2 Req.)
445 Handle
448 Throttle Valve Lever
449 Throttle Valve Lever Pin
458 “O” Ring
461 Valve
462 Valve Bushing
Air Tools
Manufacturers
463 of Quality
“O” Ring
464 Swivel Head Gasket
1112 Old
Railroad
Bed RD. 469 Swivel Backhead
P.O. Box 38 481 “O” Ring
(931) 425-6882
Taft, Tennessee
38488
484 Washer (2 Req.)
FAX (931) 425-6884
Web Address:
485 Set Screw (3 Req.)Email: staff@atlanticairtool.com
www.atlanticairtool.com
486 Lock Screw Nut
487 Swivel Lock Bracket
488 Lockscrew
492 Swivel
493 Slip Ring (2 Req.) 495 Swivel Head Retainer
458
71
AATC
444 SERIES
(SWIVEL HEAD
ASSEMBLY)
492
93
94
59
96
444 SERIES SAFETY HANDLE
472
449
453
457
455
411
448
452
411
AATC
444 SERIES
SAFETY HANDLE
11
411
448
449
452
453
455
457
Shim (2 Req.)
Safety Catch
Pin
Spring
Handle
472 Complete 444 Series Safety Handle Assembly Manufacturers of Quality Air Tools
30C / 30CH
Shown Here Is The 30C15
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
(mm)
PSI
(mm)
MOVING JAW
STROKE
MAX
AT MAX
TRAVEL
POWER
INCHES
AIR PRESSURE
(kn)
(mm)
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
INCHES
MODEL NO.
Alum.
Steel
REACH
30C15
1/8
(3.17)
3/32
(2.36)
11/2
(38.1)
11/16
(17.45)
3000
(13.35)
9/16
(14.27)
1/16
(1.57)
10 1/4
(260.35)
4 1/2
(2.04)
30C20
1/8
(3.17)
3/32
(2.36)
2
(50.8)
11/16
(17.45)
3000
(13.35)
9/16
(14.27)
1/16
(1.57)
10 3/4
(273.05)
5
(2.3)
30C25
1/8
(3.17)
3/32
(2.36)
2.5
(63.5)
11/16
(17.45)
3000
(13.35)
9/16
(14.27)
1/16
(1.57)
11
(279.4)
5 1/2
(2.49)
30C30
1/8
(3.17)
3/32
(2.36)
3
(76.2)
11/16
(17.45)
3000
(13.35)
9/16
(14.27)
1/16
(1.57)
11 1/4
(285.75)
6
(2.72)
30CH15
5/32
(4)
3/32
(2.36)
1 1/2
(38.1)
11/16
(17.45)
3800
(19.90)
9/16
(14.27)
1/16
(1.57)
10 1/4
(260.35)
4 1/2
(2.04)
30CH20
5/32
(4)
3/32
(2.36)
2
(50.8)
11/16
(17.45)
3800
(19.90)
9/16
(14.27)
1/16
(1.57)
10 3/4
(273.05)
5
(2.3)
30CH25
5/32
(4)
3/32
(2.36)
2.5
(63.5)
11/16
(17.45)
3800
(19.90)
9/16
(14.27)
1/16
(1.57)
11
(279.4)
5 1/2
(2.49)
30CH30
5/32
(4)
3/32
(2.36)
3
(76.2)
11/16
(17.45)
3800
(19.90)
9/16
(14.27)
1/16
(1.57)
11 1/4
(285.75)
6
(2.72)
YOKE
C15
A
1
C20
B
1/2
2
C25
2
1
1/4
1
1/4
1
1/4
C
Closed Ht.
(mm)
D
E
F
G
H
I
1
15/16
3/8
or
7/16
3/16
or
1/4
3
9/16
3
9/32
1
15/16
2
I
3/8
3/16
3
7/16
1/8
3/8
9/16
3
9/32
7/16
9/32
3/8
3/16
4
9/16
3
C30
3
1 1/4
2 1/8
3/8
3/16
4 5/8
9/16
3 1/2
9/32
C30HD
3
1 1/4
2 1/8
3/8
3/16
4 5/8
9/16
3 1/2
9/32
1/2
G
F
E
Taft, Tennessee
A
C
B
(931) 425-6882 • FAX (931) 425-6884
12
.375
D
H
34
35
04
05
07
06
05
11
04
03
100
08/37
28
36
27
03
ROLLER ASSY 229
45
49
39
86
38
11
24
01
48
81
41/219
25
102
98
55
30C ONLY
23
21
47
(Typical
6 Places)
26
65
56
57
22
YOKE
33
46
58
71
66
213
67
92
93
93
214
68
217
103
215
212
94
14
122
LEVER BEARING ASSY
216
95
96
AATC
MODEL 30C-30CH
ATLANTIC
COMPRESSION RIVETER
SafetyCOMPRESSION
Backhead
Maximum
Air Pressure 90 Psi
30C /with
30CH
RIVETER
AATC PART #
01
03
04
05
06
07
08
11
14
21
22
23
24
25
26
27
28
33
34
35
36
37
38
39
41
45
46
47
48
49
55
56
57
58
65
66
67
68
71
DESCRIPTION
Yoke Frame Plate(2) Roller Shaft (2)
Wedge Guide Plate (2)
Roller Thrust Washer (4)
Needle Roller (40)
Plate Roller (2)
Piston Fork For 30C Piston Return Spring (2) (30
Lever Bearing Shaft Cylinder
Lever Shaft
Lever Shaft Washer Lever Shaft Screw
Spacer Block Spacer Block Pin
Guard Guard Screw Piston Rod Nut
Piston Leather Plate Piston Leather Piston Piston Fork
Wedge Spacer Rivet Wedge Spacer
Short “C” Wedge For 30C
Throttle Valve Lever Cylinder Head Gasket
Allen Cap Screw (6)
Lever Arm
Screw
Cylinder Head
Throttle Valve
“O” Ring
Yoke Bolt (2)
Yoke Bolt Nut (2)
Set Holder
Set Holder Spring
AATC PART #
81
86
92
93
94
95
96
Series) 98
100
102
103
122
212
213
214
215
216
217
219
229
DESCRIPTION
Set Screw
Swivel
“O” Ring (2)
“O” Ring
Swivel Nut
Elbow
Spring
(Includes 1-#07, 20-#06, 2-#05)
Lever Arm Assembly Head Assembly
Swivel Assembly
(Includes 1-#92, 2-#93, 1-#94, 1-#95, 1-#96)
Lever Bearing Outer Race
Needle Roller
Lever Bearing Inner Race
Lever Bearing Assembly
(Includes 1-#212, 44-#213, 1-#214)
Set Holder Lever Assembly
(Includes 1-#217, 1-#215, 1-#14)
Set Holder Lever
Short “C” Wedge For 30CH
Roller Assembly
(Includes 2-#100, 2-#03, 2-#04)
13
Atlantic Air Tool
Co., Inc.
60C / 60CH
RIVET
CAPACITY
DIAMETER
INCHES
AIR PRESSURE
(kn)
(mm)
(mm)
MOVING JAW
STROKE
MAX
AT MAX
TRAVEL
POWER
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
(mm)
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
INCHES
MODEL NO.
Alum.
Steel
REACH
Closed Ht.
60C15
3/16
(4.75)
5/32
(3.96)
11/2
(38.1)
11/16
(17.45)
6000
(26.70)
9/16
(14.27)
1/16
(1.57)
14
(355.6)
5 1/2
(2.49)
60C20
3/16
(4.75
5/32
(3.96)
2
(50.8)
11/16
(17.45)
6000
(26.70)
9/16
(14.27)
1/16
(1.57)
14 1/2
(368.30)
6
(2.72)
60C25
3/16
(4.75)
5/32
(3.96)
2 1/2
(63.5
11/16
(17.45)
6000
(26.70)
9/16
(14.27)
1/16
(1.57)
14 3/4
(374.65)
6 1/2
(2.95)
60C30
3/16
(4.75)
5/32
(3.96)
3
(76.2)
11/16
(17.45)
6000
(26.70)
9/16
(14.27)
1/16
(1.57)
15
(381)
7
(3.18)
60C30HD
3/16
(4.75)
5/32
(3.96)
3
(76.2)
11/16
(17.45)
6000
(26.70)
9/16
(14.27)
1/16
(1.57)
15
(381)
7 1/2
(3.40)
60CH15
3/16
1/4
(4.75)
5/32
(3.96)
11/2
(38.1)
11/16
(17.45)
7600
(33.81)
9/16
(14.27)
1/16
(1.57)
14
(355.6)
5 1/2
(2.49)
60CH20
3/16
(4.75)
5/32
(3.96)
2
(50.8)
11/16
(17.45)
7600
(33.81)
9/16
(14.27)
1/16
(1.57)
14 1/2
(368.30)
6
(2.72)
60CH25
3/16
(4.75)
5/32
(3.96)
2.5
(63.5)
11/16
(17.45)
7600
(33.81)
9/16
(14.27)
1/16
(1.57)
14 3/4
(374.65)
6 1/2
(2.95)
60CH30
3/16
(4.75)
5/32
(3.96)
3
(76.2)
11/16
(17.45)
7600
(33.81)
9/16
(14.27)
1/16
(1.57)
15
(381)
7
(3.18)
60CH30HD
3/16
(4.75)
5/32
(3.96)
3
(76.2)
11/16
(17.45)
7600
(33.81)
9/16
(14.27)
1/16
(1.57)
15
(381)
7 1/2
(3.40)
YOKE
C15
A
1
B
1
1/2
1/4
C
1
15/16
(mm)
D
E
F
G
H
I
3/8
or
7/16
3/16
or
1/4
3
9/16
3
9/32
I
C20
2
1 1/4
1 15/16
3/8
3/16
3 7/16
9/16
3
9/32
C25
2 1/2
1 1/4
2 1/8
3/8
3/16
4 3/8
9/16
3 7/16
9/32
C30
3
1
2
1/8
3/8
3/16
4
5/8
9/16
3
1/2
9/32
C30HD
3
1 1/4
2 1/8
3/8
3/16
4 5/8
9/16
3 1/2
9/32
1/4
G
F
E
Taft, Tennessee
A
C
B
(931) 425-6882 • FAX (931) 425-6884
14
.375
D
H
FOR 60CH
97
31
09
97
04
FOR 60C
28
03
ROLLER ASSY 228
07
06
36
49
38
27
45
05
08
117
03
107
04
05
86
81
117
03
102
48
15/220
04
100
51
34
35
04
98
25
55
02
24
03
ROLLER ASSY 229
23
47
(Typical
6 Places)
26
01
56
65
57
22
YOKE
50
33
34
35
46
58
71
103
44
66
40
67
68
44
213
94
214
217
92
93
93
19
215
212
20
122
95
96
14
LEVER BEARING ASSY
216
AATC
MODEL 60C-60CH
ATLANTIC
COMPRESSION
RIVETER
Maximum
Air Pressure
with
Backhead
60C
/ Safety
60CH
COMPRESSION
RIVETER
01
02
03
04
05
06
07
08
09
14
15
19
20
22
23
24
25
26
27
28
31
33
34
35
36
38
40
44
45
46
47
48
49
50
51
55
56
57
90 Psi
Yoke Frame Plate (2) Cylinder
Roller Shaft (2)
Needle Roller (40)
Plate Roller (2)
Piston Fork
Needle Roller, Heavy Duty (40)
Lever Bearing Shaft Wedge C For 60C
“O”
Ring
“O” Ring
Lever Shaft
Lever Shaft Washer
Lever Shaft Screw
Guard Guard Screw Plate Roller (2)
Piston Rod Nut
Piston Leather Plate (2) Piston Leather (2)
Piston Wedge Spacer Rivet Separator
Retaining Ring (2)
Screw Tandem Piston
Piston Rod
Cylinder Head
Throttle Valve
58
65
66
67
68
71
81
86
92
93
94
95
96
97
98
100
102
103
107
117
122
212
213
214
215
216
217
220
228
229
15
“O” Ring
Yoke Bolt
Yoke Bolt Nut (2)
Set Holder
Set Holder Spring
Set Screw
Swivel
“O” Ring (2)
“O” Ring
Swivel Nut
Elbow
Spring
(Includes 1-#07, 20-#06, 2-#05)
Lever Arm Assembly
Head Assembly
Roller Plate Assembly (2)
(Includes 1-#31, 20-#09, 2-#97)
Swivel Assembly
(Includes 1-#92, 2-#93, 1-#94, 1-#95, 1-#96)
Needle Roller (44)
(Includes 1-#212, 44-#213, 1-#214)
Set Holder Lever Assembly, H.D.
Set Holder Lever, H.D.
Long “C” Wedge/ High Pressure
Roller Assemblies
(Includes 2-#107, 2-#04, 2-#03)
Roller Assemblies
( Includes 2-#100, 2-#04, 2-#03)
90C
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
(mm)
PSI
(mm)
MOVING JAW
STROKE
MAX
AT MAX
TRAVEL
POWER
INCHES
AIR PRESSURE
(kn)
(mm)
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
INCHES
MODEL NO.
Alum.
Steel
REACH
Closed Ht.
90C15
1/4
(6.35)
3/16
(4.75)
11/2
(38.1)
11/16
(17.45)
9000
(40.05)
9/16
(14.27)
1/16
(1.57)
18 3/4
(476.25)
8 1/2
(3.86)
90C20
1/4
(6.35)
3/16
(4.75)
2
(50.8)
11/16
(17.45
9000
(40.05)
9/16
(14.27)
1/16
(1.57)
19 1/4
(488.95)
9
(4.08)
90C25
1/4
(6.35)
3/16
(4.75)
2.5
(63.5)
11/16
(17.45
9000
(40.05)
9/16
(14.27)
1/16
(1.57)
19 1/2
(495.30)
9 1/2
(4.31)
90C30
1/4
(6.35)
3/16
(4.75)
3
(76.2)
11/16
(17.45
9000
(40.05)
9/16
(14.27)
1/16
(1.57)
19 3/4
(501.65)
10
(4.54)
90C30HD
1/4
(6.35)
3/16
(4.75)
3
(76.2)
11/16
(17.45
9000
(40.05)
9/16
(14.27)
1/16
(1.57)
19 3/4
(501.65)
10 1/2
(4.77)
YOKE
C15
A
1
B
1
1/2
1/4
C
1
15/16
(mm)
D
E
F
G
H
I
3/8
or
7/16
3/16
or
1/4
3
9/16
3
9/32
C20
2
1 1/4
1 15/16
3/8
3/16
3 7/16
9/16
3
9/32
C25
2 1/2
1 1/4
2 1/8
3/8
3/16
4 3/8
9/16
3 7/16
9/32
C30
3
1
2
1/8
3/8
3/16
4
5/8
9/16
3
1/2
9/32
C30HD
3
1 1/4
2 1/8
3/8
3/16
4 5/8
9/16
3 1/2
9/32
1/4
G
I
F
E
Taft, Tennessee
A
C
B
(931) 425-6882 • FAX (931) 425-6884
16
.375
D
H
97 09
97
09
31
31
97
60
97
54
36
60
34
72
03
230
289
(3)
288
10
29
289
117
79
75
286
38
90
117
109
32
35
08
107
76
290
30
49
19
232
67-L50D7H3
81
66
(3)
55
74
287
98
40
65
(3)
44
51
47
(Typical
6 Places)
34
118
56
57
35
50
20
C15
YOKE
102
48
89
44
19
33
44
46
34
40
58
71
35
103
50
44
92
93
93
20
AATC
MODEL 90C
COMPRESSION
RIVETER
ATLANTIC
94
122
95
96
Our Tool is furnished with Safety Backhead
90C COMPRESSIONMaximum
RIVETER
Air Pressure 90 Psi
C15
03
08
09
10
19
20
29
30
31
32
33
34
35
36
38
40
44
46
47
48
49
50
51
54
55
56
57
58
60
65
66
67-L50D7H3
71
72
74
75
76
79
Standard Yoke
Roller Shaft 81
Piston Fork
89
Needle Roller (40)
90
Needle Roller End Bearing (40) 92
“O” Ring (2) 93
“O” Ring (2) 94
Inner Race End Bearing
95
Pivot Bearing 96
97
98
Piston Rod Nut
102
Piston Leather Plate (3)
107
Piston Leather (3)
Piston 109
Wedge Spacer Rivet Separator (2) 117
Retaining Ring (4)
118
122
230
Screw Tandem Piston (2)
232
Piston Rod
Roller Shaft 286
287
Cylinder Head
288
Throttle Valve 289
“O” Ring
290
Retainer Ring (2)
Yoke Bolt (3)
Yoke Bolt Nut (3)
Set Holder (31/8” LX 7/16” DIA. X 3/16” SET HOLE SIZE)
Bearing Bolt
Bearing Bolt Nut
Bearing Bolt Washer
17
Piston Rod
Wedge Long “A”
Swivel
“O” Ring (2)
“O” Ring
Swivel Nut
Elbow
Thrust Washer (4)
Spring
Lever Arm Assembly
Plate Roller Assembly
(Includes 1-#31, 20-#09, 2-#97)
(Includes 1-#32, 40-#10, 1-#29)
Spring
Swivel Assembly
(Includes 1-#92, 2-#93, 1-#94, 1-#95, 1-#96)
Roller Assembly
(Includes 2-#107, 1-#54, 1-#03, 2-#60)
(Includes 1-#109, 1-#286, 1-#30)
Lever
Yoke Plate
Cover Guard
Guard Screw
Cylinder
NOTE
DUE TO VERY HIGH SQUEEZING
PRESSURES DEVELOPED BY THIS
TOOL, USE HEAVY DUTY BEARINGS
ONLY. THE USE OF STANDARD
BEARINGS WILL CAUSE DAMAGE TO
THE TOOL AND POSSIBLE INJURY TO
THE OPERATOR.
444C
Shown Here Is The 444CFH21
RIVET
CAPACITY
DIAMETER
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
AIR PRESSURE
(kn)
(mm)
(mm)
OVERALL LENGTH
With Out
Yoke
INCHES
(mm)
with
standard
yoke
INCHES
(mm)
Max
Ram
Travel
STROKE
AT
MAX
POWER
WEIGHT
LBS.
(kgs)
MODEL NO.
Alum.
Steel
REACH
GAP
444CFH21
5/16
(7.9)
1/4
(6.35)
2 1/8
(53.97)
1 1/2
(38.1)
12,000
(53.4)
19 23/32
(500.8)
23 3/16
(588.96)
5/8
(19.05)
3/32
(2.38)
15.5
(7.05)
444CSH21
5/16
(7.9)
1/4
(6.35)
2 1/8
(53.97)
1 1/2
(38.1)
12,000
(53.4)
19 23/32
(500.8)
23 3/16
(588.96)
5/8
(19.05)
3.32
(2.38)
16.5
(7.50)
YOKE
C21
A
2
1/8
B
1
1/2
C
2
5/16
D
E
F
G
H
I
1/2
3/16
or
1/4
4 1/4
1 1/4
3 7/8
5/16
G
I
F
E
Taft, Tennessee
A
C
B
(931) 425-6882 • FAX (931) 425-6884
18
.375
D
H
405
PLATE
ROLLER
ASSEMBLY
477
409
431
405
460
402
428
460
423
427
454
460
401
425
460
447 454
466
END BEARING
ASSEMBLY
478
476
426 422
(2 Required)
466
423
497
404 (4 Required)
432
409
429
476
67-L54D8H3
497
465
465
401
414
413
468
STANDARD YOKE
#C21
435
444 SERIES “C” UNIT
67-L54D8H3
401 402 404 405 409 413 414 422 423 425 426 427 428 429 431 432 447 454 460 465 466 468 476 477 478 497 Setholder
Yoke Plate
“C” Adapter
Wedge Guide Button (4 Req.)
Thrust Washer (4 Req.)
Needle Roller (25 Req. per #477), (45 Req. per #478)
Set Lever
Bearing Shaft
Lever Shaft
Spacer Block
Spacer Block Pin
Guard
Guard Screw
Inner Race
Stationary Roller
Outer Race
Screw (4 Req.)
Stationary Roller Shaft (2 Req.)
Yoke Bolt
Yoke Bolt Nut
Setholder Spring
Pivot Bearing Bolt Washer
Plate Roller Assembly (2 Req.)
Thrust Washer (2 Req.)
434
436
408
443
439
439
(See Chart Below)
419
438
444
442R
433
420
440
443
499
444
434
435
450
436
451
442L
WEDGE NUMBER
441---C UNIT
441--- 3-1/4+5-1/4 ALL JAW
482---7-1/4 ALL JAW
490---9-1/8 ALL JAW
408 Wedge Connector
419 “O” Ring
420 “O” Ring
433 Piston Rod Nut
Manufacturers
434 of Quality
Piston Air
Leather
ToolsPlate
435 Piston Leather
Old Railroad
Bed RD. 436 Piston
1112
P.O.
(931) 425-6882
Box 38 438 Pin
Taft,
FAX (931) 425-6884
Tennessee
38488 439 Retaining Ring (2 Req.)
Web
Address:
440 Separator
441 Wedge
442L Spring (Need One Of Each)
442R Spring (Need One Of Each)
443 Spring Washer (2 Req.)
AATC
444 SERIES
(POWER UNIT)
19
444
450
451
499
Spring Guide
Piston Rod
Cylinder (Swivel Head) ATLANTIC AIR TOOL COMPANY, INC.
444 SERIES FIXED HEAD ASSEMBLY
449
445
411
463
448
411
462
412 484
456
484
424
446
(TYP 2 PLACES)
484
447
(TYP 4 PLACES)
461
458
71
492
AATC
444 SERIES
(FIXED HEAD
ASSEMBLY)
93
94
59
421
96
59
71
93
94
96
411
412
421
424
445
446
447
448
449
456
458
461
462
463
484
492
Swivel Nut
“O” Ring
“O” Ring
Elbow
Shim (2 Req.)
Nut (2 Req.)
Cylinder (Fixed Head And Bench)
Screw (2 Req.)
Handle
Screw (4 Req.)
Fixed Cylinder Head
“O” Ring
Valve
Valve Bushing
“O” Ring
Washer (4 Req.)
Swivel
444 SERIES SWIVEL HEAD ASSEMBLY
449
445
495
493
411
481
448
485
(3 Required)
463
411
462
488
487
486
484
493
424
464
424
484
469
461
AATC PART #
DESCRIPTION
59 Swivel Nut
71 Throttle Valve Spring
93 “O” Ring
94 “O” Ring
96 Elbow
411 Shim (2 Req.)
424 Screw (2 Req.)
445 Handle
448 Throttle Valve Lever
449 Throttle Valve Lever Pin
458 “O” Ring
461 Valve
462 Valve Bushing
Air Tools
Manufacturers
463 of Quality
“O” Ring
464 Swivel Head Gasket
1112 Old
Railroad
Bed RD. 469 Swivel Backhead
P.O. Box 38 481 “O” Ring
(931) 425-6882
Taft, Tennessee
38488
484 Washer (2 Req.)
FAX (931) 425-6884
Web Address:
485 Set Screw (3 Req.)Email: staff@atlanticairtool.com
486 Lock Screw Nut
487 Swivel Lock Bracket
488 Lockscrew
492 Swivel
493 Slip Ring (2 Req.) 495 Swivel Head Retainer
458
71
AATC
444 SERIES
(SWIVEL HEAD
ASSEMBLY)
492
93
94
59
96
444 SERIES SAFETY HANDLE
472
449
453
457
455
411
448
452
411
AATC
444 SERIES
SAFETY HANDLE
20
411
448
449
452
453
455
457
Shim (2 Req.)
Safety Catch
Pin
Spring
Handle
472 Complete 444 Series Safety Handle Assembly Manufacturers of Quality Air Tools
30C / 30CH Compression Bench Riveter
Shown Here Is The 30C60B
YOKE
THICKNESS
INCHES
REACH
INCHES
(mm)
(mm)
MAX FORCE
w/90 PSI
(6.21 Bar)
GAP
INCHES
WEIGHT
LBS.
(mm)
(kgs)
AIR PRESSURE
(kn)
MODEL NO.
30C60B
1 3/8
(34.9)
6
(152.4)
3000
(13.35)
3 1/2
(88.9)
31
(14)
30C90B
1 5/8
(41.3)
9 1/2
(241.3)
3000
(13.35)
3 1/2
(88.9)
59
(27)
30C120B
2 3/8
(60.3)
12 1/2
(317.5)
3000
(13.35)
4
(101.6)
179
(81.4)
All Bench Models come equipped with adjustable lower Set
Holder, Bench Mounting Bracket, Hoses and Foot Control with
Safety Guard.
PEDESTAL STANDS AVAILABLE SEE PAGE 33
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
21
REACH
GAP
34
35
04
05
07
06
05
11
04
03
100
08/37
28
36
27
03
ROLLER ASSY 229
45
39
86
38
41/219
25
11
01
24
30C ONLY
23
21
47
(Typical
6 Places)
26
65
56
22
33
46
66
215
212
213
67
214
217
14
LEVER BEARING ASSY
216
AATC
MODEL 30C / 30CH
ATLANTIC
AIR TOOL
COMPANY, INC.
COMPRESSION BENCH
RIVETER
Maximum Air
Pressure 90 Psi
30C / 30CH COMPRESSION BENCH
RIVETER
01
03
04
05
06
07
08
11
14
21
22
23
24
25
26
27
28
33
34
35
36
37
38
39
41
45
46
47
55
56
65
66
67
Yoke Frame Plate(2) Roller Shaft (2)
Needle Roller (40)
Plate Roller (2)
Piston Fork For 30C Piston Return Spring (2) (30
Lever Bearing Shaft Cylinder
Lever Shaft Lever Shaft Washer Lever Shaft Screw
Guard Guard Screw Piston Rod Nut
Piston Leather Plate
Piston Leather
Piston
Piston Fork
Wedge Spacer Rivet
Wedge Spacer
Short “C” Wedge For 30C
Allen Cap Screw (6) Throttle Valve Bushing
Cylinder Head
Yoke Bolt (2)
Yoke Bolt Nut (2)
Set Holder
• 67L-68D7H3 - 6”
• 67L-68D7H3 - 9 1/2”
• 67L-78D7H3 - 12 1/2”
81
86
98
100
212
213
Series) 214
215
216
217
219
229
22
Set Screw
Spring
(includes 1-#07, 20-#06, 2-#05)
Needle Roller
(Includes 1-#212, 44-#213, 1-#214)
Set Holder Assembly
Set Holder Lever
Short “C” Wedge FOR 30CH
Roller Assembly
(Includes 2-#100, 2-#03, 2-#04)
60C / 60CH Compression Bench Riveter
YOKE
THICKNESS
INCHES
REACH
INCHES
(mm)
(mm)
MAX FORCE
w/90 PSI
(6.21 Bar)
GAP
INCHES
WEIGHT
LBS.
(mm)
(kgs)
AIR PRESSURE
(kn)
MODEL NO.
60C60B
1 3/8
(34.9)
6
(152.4)
6000
(26.70)
3 1/2
(88.9)
33
(15)
60C90B
1 5/8
(41.3)
9 1/2
(241.3)
6000
(26.70)
3 1/2
(88.9)
61
(28)
60C120B
2 3/8
(60.3)
12 1/2
(317.5)
6000
(26.70)
4
(101.6)
181
(82.3)
60C180B
2 3/4
(69.85)
18
(457.2)
6000
(26.70)
4
(101.6)
406
(185)
Safety Guard.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
23
REACH
GAP
FOR 60CH60B
51
34
35
04
97
31
09
97
04
FOR 60C60B
04
28
03
05
ROLLER ASSY 228
07
08
117
03
107
36
38
27
06
15/220
86
05
117
04
03
100
25
02
24
03
ROLLER ASSY 229
23
26
01
130
65
47
(Typical
6 Places)
22
50
33
34
35
46
44
66
40
67
19
215
212
20
44
213
214
217
14
LEVER BEARING ASSY
216
60C60B /AATC
60CH60B COMPRESSION BENCH RIVETER
MODEL 60C60B-60CH60B
COMPRESSION BENCH RIVETER
AATC PART #
01
02
03
04
05
06
07
08
09
14
15
19
20
22
23
24
25
26
27
28
31
33
34
35
36
38
40
44
46
47
48
49
Maximum Air Pressure 90 Psi
AATC PART #
DESCRIPTION
DESCRIPTION
Yoke Frame Plate (2)
Cylinder
Roller Shaft (2)
Needle Roller (40)
Plate Roller (2)
Piston Fork
Needle Roller, Heavy Duty
Lever Bearing Shaft
Wedge C For 60C
“O” Ring
“O” Ring
Lever Shaft
Lever Shaft Washer
Lever Shaft Screw
Spacer Block
Spacer Block Pin
Guard
Guard Screw
Plate Roller (2)
Piston Rod Nut
Piston Leather (2)
Piston
Wedge Spacer Rivet
Separator
Retaining Ring (2)
Cylinder Head
Allen Cap Screw (6)
Lever Arm
Screw
50
51
65
66
67
86
97
100
107
117
130
212
213
214
215
216
217
220
228
229
24
Tandem Piston
Piston Rod
Yoke Bolt
Yoke Bolt Nut (2)
Set Holder
• 67L-68D7H3 - 6” & 9”
• 67L-78D7H3 - 12 1/2”
• 67L-94D7H3 - 18”
Set Screw
(Includes 1-#07, 20-#06, 2-#05)
Roller Plate Assembly (2)
(Includes 1-#31, 20-#09, 2-#97)
Cylinder Head
Needle Roller (44)
(Includes 1-#212, 44-#213, 1-#214)
Set Holder Lever Assembly, H.D.
Set Holder Lever, H.D.
Long “C” Wedge/ High Pressure
Roller Assembly H.D.
(Includes 2-#03, 2-#04, 2-#107)
Roller Assembly
(Includes 2-#100, 2-#03, 2-#04)
90C Compression Bench Riveter
YOKE
THICKNESS
INCHES
REACH
INCHES
(mm)
(mm)
MAX FORCE
w/90 PSI
(6.21 Bar)
GAP
INCHES
WEIGHT
LBS.
(mm)
(kgs)
AIR PRESSURE
(kn)
MODEL NO.
90C60B
1 3/8
(34.9)
6
(152.4)
9000
(40.05)
3 1/2
(88.9)
35
(16)
90C90B
1 5/8
(41.3)
9 1/2
(241.3)
9000
(40.05)
3 1/2
(88.9)
63
(29)
90C90BHD
2 3/8
(69.85)
9 1/2
(241.3)
9000
(40.05)
3 1/2
(88.9)
153
(70)
90C120B
2 3/8
(60.3)
12 1/2
(317.5)
9000
(40.05)
4
(101.6)
183
(83)
90C180B
2 3/4
(69.85)
18
(457.2)
9000
(40.05)
4
(101.6)
408
(186)
Safety Guard.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
25
REACH
GAP
97 09
97
09
31
31
97
60
97
54
36
60
34
72
03
230
289
(3)
288
32
10
29
289
117
79
75
286
38
90
117
109
35
08
107
76
290
30
19
232
66
(3)
67
74
287
40
65
(3)
44
51
47
(Typical
6 Places)
130
34
118
35
50
20
89
44
19
33
44
46
34
40
35
50
44
20
AATC
MODEL 90C
COMPRESSION
BENCH
RIVETER
ATLANTIC
AIR TOOL
COMPANY, INC.
Maximum
Air Pressure 90 Psi
90C COMPRESSION BENCH
RIVETER
03
08
09
10
19
20
29
30
31
32
33
34
35
36
38
40
44
46
47
50
51
54
56
60
65
66
67
72
74
75
76
79
Roller Shaft 89
Piston Fork
90
Needle Roller (40)
97
Needle Roller End Bearing (40) 107
“O” Ring (2) “O” Ring (2) 109
Inner Race End Bearing
Pivot Bearing 117
130
230
Piston Rod Nut
Piston Leather Plate (3) 232
Piston Leather (3)
Piston 286
Wedge Spacer Rivet 287
Separator (2) 288
Retaining Ring (4)
289
290
Allen Cap Screw (6) Tandem Piston (2)
Piston Rod
Roller Shaft Cylinder Head
Retainer Ring (2)
Yoke Bolt (3)
Yoke Bolt Nut (3)
Set Holder
• 67L-78D7H3 - 6” & 91/2”
• 67L-86D7H3 - 12 1/2” & (9 1/2” HD C90B)
• 67L-94D7H3 - 18”
Bearing Bolt
Bearing Bolt Nut
Bearing Bolt Washer
Piston Rod
Wedge Long “A”
Thrust Washer (4)
(Includes 1-#31, 20-#09, 2-#97)
(Includes 1-#32, 40-#10, 1-#29)
Cylinder Head (Bench)
Roller Assembly
(Includes 2-#107, 1-#54, 1-#03, 2-#60)
(Includes 1-#109, 1-#286, 1-#30)
Lever
Yoke Plate
Cover Guard
Guard Screw
Cylinder
NOTE
DUE TO VERY HIGH SQUEEZING
PRESSURES DEVELOPED BY THIS
TOOL, USE HEAVY DUTY BEARINGS
ONLY. THE USE OF STANDARD
BEARINGS WILL CAUSE DAMAGE TO
THE TOOL AND POSSIBLE INJURY TO
THE OPERATOR.
26
444CB Compression Bench Riveter
Shown Here Is The 444CB240B
YOKE
THICKNESS
INCHES
REACH
INCHES
(mm)
(mm)
MAX FORCE
w/90 PSI
(6.21 Bar)
GAP
INCHES
WEIGHT
LBS.
(mm)
(kgs)
AIR PRESSURE
(kn)
MODEL NO.
444CB120BHD
2 3/8
(60.3)
12 1/2
(317.5)
12,000
(53.38)
4
(101.6)
190
(86.4)
444CB180B
2 3/4
(69.85)
18
(457.2)
12,000
(53.38)
4
(101.6)
415
(189)
444CB240B
3 1/4
(82.3)
24
(610)
12,000
(53.38)
6
(152.4)
1015
(461.4)
Safety Guard.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
27
REACH
GAP
444 SERIES BENCH HEAD ASSEMBLY
480
446
AATC
444 SERIES
(BENCH HEAD
492
93
94
59
96
59
93
94
96
446
447
480
492
Swivel Nut
“O” Ring
“O” Ring
Elbow
Screw (4 Req.)
Bench Cylinder Head
Swivel
ASSEMBLY)
405
PLATE
ROLLER
ASSEMBLY
477
409
431
405
460
483
428
460
423
427
401
425
447 454
466
476
426 422
(2 Required)
466
423
404 (4 Required)
476
67
401
413
468
435
408
439
439
442R
440
421
444
451
442L
WEDGE NUMBER
441---C UNIT
441--- 3-1/4+5-1/4 ALL JAW
482---7-1/4 ALL JAW
490---9-1/8 ALL JAW
67 Set Holder
• 67L-120D8H3 - 12 1/2”
• 67L-136D8H3 - 18”
• 67L-136D8H3 - 24”
401 Yoke Plate
404 Wedge Guide Button (4 Req.)
405 Thrust Washer (4 Req.)
409 Needle Roller (25 Req. per #477), (45 Req. per #478)
413 Set Lever
414 Bearing Shaft
422 Lever Shaft
425 Spacer Block
426 Spacer Block Pin
427 Guard
428 Guard Screw
429 Inner Race
431 Stationary Roller
432 Outer Race
447 Screw (4 Req.)
454 Stationary Roller Shaft (2 Req.)
465 Yoke Bolt
466 Yoke Bolt Nut
468 Setholder Spring
476 Pivot Bearing Bolt Washer
477 Plate Roller Assembly (2 Req.)
478 End Bearing Assembly
Manufacturers
Air Tools
483 of Quality
“C” Adapter
P.O. Box 38
(931) 425-6882
FAX (931) 425-6884
443
408 Wedge Connector
419 “O” Ring
420 “O” Ring
444
421 Cylinder (Fixed Head and Bench)
433
Manufacturers
Tools
420 433 of Quality
PistonAir
Rod
Nut
434 Piston Leather Plate
435 Piston Leather
P.O. Box 38 434
(931) 425-6882
Taft, Tennessee
38488
436 Piston
FAX (931) 425-6884
Web Address:
438 Pin
435
436 439 Retaining Ring (2 Req.)
450
440 Separator
441 Wedge
442L Spring (Need One Of Each)
442R Spring (Need One Of Each)
443 Spring Washer (2 Req.)
419
438
443
434
436
(See Chart Below)
ATLANTIC
414
465
465
444 SERIES “BENCH C” UNIT
454 460 460 BEARING
END
ASSEMBLY
478
497 432 409 429
497
AATC
444 SERIES
(POWER
UNIT)
444 450 451 28
Spring Guide
Piston Rod
458CB Compression Riveter
Shown Here Is The 458CB180B
YOKE
THICKNESS
INCHES
REACH
INCHES
(mm)
(mm)
MAX FORCE
w/70 PSI
(4.83 Bar)
GAP
INCHES
WEIGHT
LBS.
(mm)
(kgs)
AIR PRESSURE
(kn)
MODEL NO.
458CB180B
3 3/4
(95.25)
18
(457.2)
22,000
(97.9)
6
(152.4)
1015
(461.4)
458CB240B
3 3/4
(95.25)
24
(610)
22,000
(97.9)
6
(152.4)
1350
(613)
Safety Guard.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
29
REACH
GAP
444AB COMPRESSION BENCH RIVETER
Shown Here Is The 444AB92
RIVET
CAPACITY
DIAMETER
INCHES
STANDARD
YOKE/JAW
DIMENSIONS
INCHES
MAX FORCE
w/90 PSI
(6.21 Bar)
(mm)
PSI
(mm)
MOVING JAW
AIR PRESSURE
MAX
TRAVEL
INCHES
(mm)
STROKE
AT MAX
POWER
INCHES
(mm)
(kn)
OVERALL
LENGTH
INCHES
(mm)
WEIGHT
WITH
JAWS
LBS.
(kgs)
MODEL NO.
Alum.
Steel
REACH
Closed Ht.
444AB32
9/32
(7.14)
7/32
(5.56)
3 1/4”
(82.5)
7/8
(22.2)
9,800
(43.61)
1
(25.4)
1/8
(3.2)
22.5
(571)
14.5
(6.78)
444AB52
1/4
(6.35)
3/16
(4.76)
5 1/4”
(133.3)
7/8
(22.2)
6,800
(30.25)
1 15/32
(37.4)
3/16
(4.75)
24 1/2
(622)
16
(7.26)
444AB72
3/16
(4.76
5/32
(3.97)
7 1/4
(184.1)
7/8
(22.2)
6000**
(26.7)
1 31/32
(49.9)
7/32
(5.6)
26.5
(673)
17.5
(7.94)
444AB92
3/16
(4.76)
5/32
(3.97)
9 1/8
(231.7)
7/8
(22.2)
6000***
(26.7)
2 7/16
(61.8)
15/64
(6)
28.5
(724)
21.5
(9.8)
All Alligator Bench Models come equipped with AATC #498 Mounting Bracket, Hoses and Foot Control with
Safety Guard. PEDESTAL STANDS AVAILABLE SEE PAGE 33
JAWS
A
B
C
D
E
F
G
AB 32
3 1/4
7/8
2
2 7/32
1/4
1 7/64
7/16
6
AB 52
5 1/4
7/8
2 1/4
2 1/8
9/32
1 1/16
7/16
6 1/2
AB 72
7
1/4
7/8
2
1
5/8
9/32
1
1/16
7/16
7
AB 92
9 1/8
7/8
3 7/16
2 1/8
9/32
1 1/16
7/16
9 7/16
5/16
H
3/16
15/16
I
6 3/16
6 1/2
7 3/4
9 1/8
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
30
H
I
C
D
B G
F
A
E
480
444 SERIES BENCH HEAD ASSEMBLY
446
492
AATC
444 SERIES
(BENCH HEAD
ASSEMBLY)
93
94
59
96
END BEARING ASSEMBLY
478
497
432
470
409
429
497
471
(7-1/4 x 9-1/8)
MOVING JAW
491
473
479
430
460
PLATE ROLLER ASSEMBLY
477
447
460
405
431
409
475
454
476
405
STATIONARY JAW
454
460
460
474
AATC
444 SERIES
("A" UNIT)
435
434
408
443
439
(See Chart Below)
419
438
444
442R
433
420
440
443
499
444
434
435
450
436
451
442L
WEDGE NUMBER
441---C UNIT
441--- 3-1/4+5-1/4 ALL JAW
482---7-1/4 ALL JAW **
490---9-1/8 ALL JAW ***
59
93
94
96
446
447
480
492
Swivel Nut
“O” Ring
“O” Ring
Elbow
Screw (4 Req.)
Bench Cylinder Head
Swivel
444 SERIES “A” UNIT
409 Needle Roller (25 Req. per #477), (45 Req. per #478)
429 Inner Race
430 Pivot Bearing
431 Stationary Roller
432 Outer Bearing Race
447 Screw
454 Stationary Roller Shaft
470 Return Spring
471 Spring/Back Up
473 Return Spring Pin
474 Pivot Bearing Bolt
475 Pivot Bearing Bolt Nut
476 Pivot Bearing Bolt Washer
477 Plate Roller Assembly (2 Req.)
478 End Bearing Assembly
479 Bearing Shaft
491 “A” Adaptor
Manufacturers
Tools(2 Req.)
497 of Quality
ThrustAir
Washer
1112 Old Railroad Bed RD. 444 SERIES POWER UNIT
P.O. Box 38
(931) 425-6882
Taft,
Tennessee
38488
FAX
(931) 425-6884
Web Address:
408 Wedge ConnectorEmail: staff@atlanticairtool.com
436
439
AATC
444 SERIES
(POWER UNIT)
419 420 433 434 435 436 438 439 440 441 442L 442R 443 “O” Ring
“O” Ring
Piston Rod Nut
Piston Leather
Piston
Pin
Separator
Wedge
Spring (Need One Of Each)
Spring (Need One Of Each)
Spring Washer (2 Req.)
1112 Old
Railroad
Bed RD. NOTE: (443 Is only used in tools manufactured before 2015)
444 of Quality
Retaining
Manufacturers
AirRing
Tools(2 Req.)
450 451 499 P.O. Box 38
31
Spring Guide
Piston Rod
Cylinder (Swivel Head)
(931) 425-6882
FAX (931) 425-6884
PEDESTAL MOUNT BRACKETS
AATC #53
60A PEDESTAL MOUNT BRACKET
ASSEMBLY
AATC #52
90A, 630A PEDESTAL MOUNT
BRACKET ASSEMBLY
AATC #498
444A PEDESTAL MOUNT BRACKET
ASSEMBLY
SHOWN HERE IS A 444 PEDESTAL MOUNT
BRACKET ASSEMBLY USED ON A 444 AB
MODEL WITH A 15000 PEDESTAL STAND
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
32
PEDESTAL STANDS
15000 PEDESTAL
USED WITH THE : 15010 PEDESTAL
USED WITH THE : C180B
C180BHD
C240B
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
33
C60B
C90B
C90BHD
C120B
444AB
WITH BRACKET ASSEMBLY AATC 498
Special YokeS and Jaws
Atlantic Air Tool Co. will design and manufacture for special
applications in minimal time.
We Have Many Former Designed Specials In Stock.
Go to our web site www.atlanticairtool.com and look through the
specials starting at the 1100 series .
Call us and we can assist you in finding or designing the Special
Yokes or Jaws to meet your application.
Phone: (931) 425-6882
Fax (931) 425-6884
34
ORDER#
67-L41D6H3
67-L42D6H3
67-L43D6H3
67-L44D6H3
67-L45D6H3
67-L46D6H3
67-L47D6H3
67-L48D6H3
67-L49D6H3
67-L50D6H3
67-L51D6H3
67-L52D6H3
67-L53D6H3
67-L54D6H3
67-L55D6H3
67-L56D6H3
67-L57D6H3
67-L58D6H3
67-L59D6H3
67-L60D6H3
67-L61D6H3
67-L62D6H3
67-L63D6H3
67-L64D6H3
67-L65D6H3
67-L66D6H3
67-L67D6H3
67-L68D6H3
67-L69D6H3
67-L70D6H3
67-L71D6H3
67-L72D6H3
67-L73D6H3
SET HOLDERS
CROSS REF# LENGTH DIAMETER SETHOLE
APT#539
2 9/16
3/8
3/16
2 5/8
3/8
3/16
2 11/16
3/8
3/16
2 3/4
3/8
3/16
2 13/16
3/8
3/16
2 7/8
3/8
3/16
2 15/16
3/8
3/16
3
3/8
3/16
3 1/16
3/8
3/16
3 1/8
3/8
3/16
3 3/16
3/8
3/16
3 1/4
3/8
3/16
3 5/16
3/8
3/16
3 3/8
3/8
3/16
3 7/16
3/8
3/16
3 1/2
3/8
3/16
3 9/16
3/8
3/16
3 5/8
3/8
3/16
3 11/16
3/8
3/16
3 3/4
3/8
3/16
3 13/16
3/8
3/16
3 7/8
3/8
3/16
3 15/16
3/8
3/16
4
3/8
3/16
4 1/16
3/8
3/16
4 1/8
3/8
3/16
4 3/16
3/8
3/16
4 1/4
3/8
3/16
4 5/16
3/8
3/16
4 3/8
3/8
3/16
4 7/16
3/8
3/16
4 1/2
3/8
3/16
4 9/16
3/8
3/16
If 1/4” Sethole is desired change H3 of order # to H4.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
35
ORDER#
67-L41D7H3
67-L42D7H3
67-L43D7H3
67-L44D7H3
67-L45D7H3
67-L46D7H3
67-L47D7H3
67-L48D7H3
67-L49D7H3
67-L50D7H3
67-L51D7H3
67-L52D7H3
67-L53D7H3
67-L54D7H3
67-L55D7H3
67-L56D7H3
67-L57D7H3
67-L58D7H3
67-L59D7H3
67-L60D7H3
67-L61D7H3
67-L62D7H3
67-L63D7H3
67-L64D7H3
67-L65D7H3
67-L66D7H3
67-L67D7H3
67-L68D7H3
67-L69D7H3
67-L70D7H3
67-L71D7H3
67-L72D7H3
SET HOLDERS
2 9/16
7/16
3/16
2 5/8
7/16
3/16
2 11/16
7/16
3/16
2 3/4
7/16
3/16
2 13/16
7/16
3/16
2 7/8
7/16
3/16
2 15/16
7/16
3/16
3
7/16
3/16
3 1/16
7/16
3/16
3 1/8
7/16
3/16
3 3/16
7/16
3/16
3 1/4
7/16
3/16
3 5/16
7/16
3/16
3 3/8
7/16
3/16
3 7/16
7/16
3/16
3 1/2
7/16
3/16
3 9/16
7/16
3/16
3 5/8
7/16
3/16
3 11/16
7/16
3/16
3 3/4
7/16
3/16
3 13/16
7/16
3/16
3 7/8
7/16
3/16
3 15/16
7/16
3/16
4
7/16
3/16
4 1/16
7/16
3/16
4 1/8
7/16
3/16
4 3/16
7/16
3/16
4 1/4
7/16
3/16
4 5/16
7/16
3/16
4 3/8
7/16
3/16
4 7/16
7/16
3/16
4 1/2
7/16
3/16
If 1/4” Setholder is desired, change H3 of order number to H4.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
36
ORDER#
67-L73D7H3
67-L74D7H3
67-L75D7H3
67-L76D7H3
67-L77D7H3
67-L78D7H3
67-L79D7H3
67-L80D7H3
67-L81D7H3
67-L82D7H3
67-L83D7H3
67-L84D7H3
67-L85D7H3
67-L86D7H3
67-L87D7H3
67-L88D7H3
67-L89D7H3
67-L90D7H3
67-L91D7H3
67-L92D7H3
67-L93D7H3
67-L94D7H3
67-L95D7H3
67-L96D7H3
67-L97D7H3
67-L98D7H3
67-L99D7H3
67-L100D7H3
67-L101D7H3
67-L102D7H3
67-L103D7H3
SET HOLDERS
4 9/16
7/16
3/16
4 5/8
7/16
3/16
4 11/16
7/16
3/16
4 3/4
7/16
3/16
4 13/16
7/16
3/16
4 7/8
7/16
3/16
4 15/16
7/16
3/16
5
7/16
3/16
5 1/16
7/16
3/16
5 1/8
7/16
3/16
5 3/16
7/16
3/16
5 1/4
7/16
3/16
5 5/16
7/16
3/16
5 3/8
7/16
3/16
5 7/16
7/16
3/16
5 1/2
7/16
3/16
5 9/16
7/16
3/16
5 5/8
7/16
3/16
5 11/16
7/16
3/16
5 3/4
7/16
3/16
5 13/16
7/16
3/16
5 7/8
7/16
3/16
5 15/16
7/16
3/16
6
7/16
3/16
6 1/16
7/16
3/16
6 1/8
7/16
3/16
6 3/16
7/16
3/16
6 1/4
7/16
3/16
6 5/16
7/16
3/16
6 3/8
7/16
3/16
6 7/16
7/16
3/16
If 1/4” Setholder is desired, change H3 of order number to H4.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
37
ADJUSTABLE SET HOLDERS
ORDER#
123-L41D6H3
123-L41D7H4
123-L45D6H3
123-L45D7H4
123-L49D6H3
123-L49D7H4
2 9/16
3/8
3/16
2 9/16
7/16
1/4
2 13/16
3/8
3/16
2 13/16
7/16
1/4
3 1/16
3/8
3/16
3 1/16
7/16
1/4
Above sizes are the only adjustable set holders available at this time.
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
38
“NOTES”
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
OUR OFFICE HOURS ARE 8 AM to 4 PM MONDAY THRU FRIDAY CENTRAL STANDARD TIME
39
“NOTES”
Taft, Tennessee
(931) 425-6882 • FAX (931) 425-6884
THE ADVANTAGES OF PURCHASING FROM
1. INTEGRITY
Atlantic Air Tool has been in the manufacturing business for over
40 years.
2. RELIABILITY
OUR TOOLS are known industry wide as one of the FINEST PRODUCTS of its type. LONG LIFE AND MINIMAL DOWN-TIME!
3. QUALITY
AATC TOOLS are designed, tooled and manufactured under strict
quality control, insuring precision and exceptional performance.
4. INNOVATIVE
AATC brought five new tools to the market: 90A, 90C, 444A, 444C
and the 630A. Parts were re-designed to improve the 30 and 60
series tools efficiency, thereby manufacturing a tool that is user friendly.
We are the only company that manufactures and sells
HEAVY-DUTY BEARINGS for the 30 and 60 series tools. These
bearings are also found in our 90A and 90C model pneumatic rivet
squeezers.
5. PREFERRED
AATC TOOLS are “NUMBER ONE” on the purchasing list of major
companies.
6. COMPLETE
90% of all AATC PARTS are manufactured IN-HOUSE.
MANUFACTURE
ALL ITEMS ARE U.S.A. MADE !
7. TECHNICAL
SERVICE
ATLANTIC AIR TOOL PERSONNEL are available during working hours to SPEAK DIRECTLY TO CUSTOMERS and RESOLVE any
problems or applications in a QUICK and TIMELY MANNER.
8. SAFETY
ALL TOOLS are equipped with safety devices as STANDARD EQUIPMENT.
9. SPECIAL
AATC will design and manufacture for special yokes or jaws
REQUIREMENTS in minimal time. We have many former designed specials in stock.
10. DELIVERY
AATC has a large inventory of various type and size raw material for
use in special applications of jaws and yokes which can reduce
delivery time by 2 or 3 weeks.
*** STANDARD TOOLS, PARTS AND ACCESSORIES are usually from stock.
Phone: (931) 425-6882 or 6883
Fax (931) 425-6884

aatc rivet squeezers

Transcription

Similar documents

catalogue - Corny Bakers

Stucchi USA 2010 Product Catalog

Diagnose und Therapie der Sinusitis und Polyposis nasi