Franke Commercial Catalogue low resolution(16.41 MB, PDF)

Transcription

COMMERCIAL PRODUCT CATALOGUE
2015 - 2016
GENERAL
INFORMATION
SINGLE
TOPMOUNT SINKS
Single Compartment Topmount Sinks
21
DOUBLE
TOPMOUNT SINKS
Double Compartment Topmount Sinks
27
TRIPLE
TOPMOUNT SINKS
Triple Compartment Topmount Sinks
31
CLASSROOM
SINKS
Classroom Sinks
37
UNDERMOUNT
SINKS
Undermount Sinks
45
Vanity Sinks
49
DRAINBOARD
SINKS
Drainboard Sinks
57
SCULLERY
SINKS
Scullery Sinks
61
HOSPITAL & LAB
SINKS
Hospital & Laboratory Sinks
73
HAND
WASH BASINS
Hand Wash Basins
89
UTILITY
SINKS
VANITY SINKS
General Information
A
Utility Sinks including Sacrarium
1
101
Urinals & Toilets
129
Washroom Accessories
133
Securityware
151
Drinking Fountains, Classic
179
Drinking Fountains, Modular
185
Drinking Fountains, Universal
190
Drinking Fountains, Bottle Fillers
195
Drinking Fountains, Combinations
199
DRINKING
FOUNTAINS,
COMBINATIONS
Drinking Fountains, Chillers
207
DRINKING
FOUNTAINS,
CHILLERS
Quick Find Guide
208
QUICK FIND
GUIDE
TYPE 316
LAB SINKS
111
What Does Make It Wonderful Mean?
35
DRINKING
FOUNTAINS,
BOTTLE FILLERS
DRINKING
FOUNTAINS,
UNIVERSAL
DRINKING
FOUNTAINS,
MODULAR
DRINKING
FOUNTAINS,
CLASSIC
SECURITYWARE
WASHROOM
ACCESSORIES
URINALS &
TOILETS
Type 316 Laboratory Sinks
Photo by permission of Bruce Prevett
FKC employee since 1998
CONDITIONS, POLICIES & PROCEDURES
TERMS AND CONDITIONS
All Franke Commercial products are eligible for prepaid shipping
(minimum 800 lbs, total order requirement) and can be combined with
other eligible Kindred products, specifically Kindred Steel Queen and
Kindred Collection. Franke Commercial products are neither eligible
for, nor considered in the calculation of Jumbo Discount.
The prices in this price book are list and exclude applicable taxes.
Regular payment terms apply: 2% - 30 days, net 45.
received the signed approval drawing. Quality System Registration to
ISO 9001 Environmental Management System ISO 14001
LEED STATEMENT
Green-Buildings’ team of LEED® Accredited Professionals have
performed a benchmark analysis of Franke Commercial Systems'
sinkware and determined that these products may:
1. Improve Building Durability
2. Reduce Demand for Raw Materials
RETURNS POLICY
Any returned goods must be accompanied by a Return Goods
Authorization which must be provided by the sales representative in
your territory. If the goods are not defective, a 25% restocking fee will
be assessed by our representative upon inspection. Custom made
sinks are not returnable. Sinks with custom faucet hole drillings are
not returnable. Products which are obsolete and not included in our
current catalogue are non-returnable.
NON-RETURNABLE:
1) Custom sinks
2) Sinks with custom hole drilings (models ending with "/X")
3) Obsolete products which are not included in our current catalogue.
PROCEDURE FOR CUSTOM SINKS
Requests should be accompanied by a thoroughly completed copy
of the check list as furnished in the Custom Sinks section. A sketch
would be helpful in many cases. Job names and quantities must be
provided.
A quote will be returned, based on the information you provide. An
approval drawing will not be prepared until we receive a purchase
order at which time we will prepare the drawing and return it for
approval by the specifier. Allow up to 48 hours for generation of the
drawing. Production will not proceed until Franke Commercial has
1
3. Improve Indoor Environmental Quality
Green-Buildings believes that several characteristics of Franke
Commercial's sinkware are congruent with green building principles
and, as such, these products may be considered applicable to high
performance buildings and also may contribute meaningfully to green
building projects that pursue a LEED® Certification.
For full details of your selected product, feel free to contact us for
details
TOPMOUJNT SINKS
S
LBS
AS
ALBS
Single sink without faucet ledge
Ledge back single sink
Wheelchair accessible/ADA compliant single sink
without faucet ledge
Wheelchair accessible/ADA compliant ledge back single sink
D
LBD
T
Double sink without faucet ledge
Ledge back double sink
Triple sink without faucet ledge
LBT
Ledge back triple sink
LHS
ALHS
ART
Opposing ledges, left & right only, single compartment
Wheelchair accessible/ADA compliant,
opposing ledges,left & right only, single compartment
Ledge right side only, single compartment
ledge right side only,single compartment
Large artroom single sink without faucet ledge
OV
Vanity basin, with overflow
LBDDBR
LBDDBL
Ledge back double with drainboard on right side
Ledge back double with drainboard on left side
RSL
RDL
RTL
WSL
WDL
WTL
Restaurant Series, single compartment
Restaurant Series, double compartment
Restaurant Series, triple compartment
World Class Series, single compartment
World Class Series, double compartment
World Class Series, triple compartment
Corner guard
Curtain hook
Back rest with anchoring covers
Curtain rod
Curtain - vinyl
QCRODX
SD
STRX
XINX
1 1/4" diameter concealed flange grab bar
Rodan series with satin finish Soap dispenser
Stratos series garmet hook with satin finish
Xinox series with satin finish
Undermount single sink
Undermount double sink
Surgical scrub station
Wall hung hand wash basin
Floor (Pedestal) hand wash basin
Wall hung basin, designer series
Wall trough utility sink
WSS
FSS
SSS
RS/SS
OC/RC
CMPX
Wall hung service sink
Floor service/mop sink
Sewage sampling sink
Sacrarium sink
T316 cup sink
Urinal
CLASSROOM SINKS
LBLS
ALBLS
LBRS
ALBRS
LBLRS
ALBLRS
Ledge back & left, single compartment
Wheelchair accessible/ADA compliant ledge back & left ,
single compartment
Ledge back & right, single compartment
Wheelchair accessible/ADA compliant ledge back & right,
single compartment
Ledge back, left & right, single compartment
ledge back,left & right, single compartment
LRS
ALRS
VANITY BASINS
V
Vanity basin, no overflow
DRAINBOARD SINKS
LBSDBR
LBSDBL
Ledge back single with drainboard on right side
Ledge back single with drainboard on left side
SCULLERY SINKS
SL
DL
TL
SSL
SDL
STL
Classic Series, single compartment
Classic Series, double compartment
Classic Series, triple compartment
Service Series, single compartment
Service Series, double compartment
Service Series, triple compartment
WASHROOM ACCESSORIES
ACG
CHCMCRCV-
OTHER
UCS
UCD
SSU
WHB
FWHB
WT
WTS
Model
LBS2708P-1
LBT8610P-1
LBS9407-3
LBLS4608P-1
Sink / Bowl Configuration
Bowl Dimensions
Gauge
With Ledge
Single, Double,
Triple
Width
front to
back
Length
front to
back
Depth
LB
S
20
7
8
(Ledge Back)
(Single bowl)
(16")
(17")
(8")
LB
T
8
6
(Ledge Back)
(Triple bowl)
(18")
LB
S
(Ledge Back)
Waste Option
P
(premium 18)
-2
(3 ½" [89mm] crumb cup
with integral overflow)
10
P
-1
(3 1/2" [89mm] crumb cup)
(16")
(10")
(premium 18)
9
4
7
*
(Single bowl)
(9 1/2")
(14 1/2")
(7")
(20)
LBL
S
4
6
8
P
(Ledge Back & left)
(Single bowl)
(14")
(16")
(8")
(premium 18)
* 20 gauge unless otherwise indicated by the letter "P" for single, classroom, double, triple & undermount sinks
-3
(1 1/2" [38mm]
duplex waste assembly)
-1
(3 1/2" [89mm] crumb cup)
2
GENERAL
INFORMATION
General Information
Nomenclature Guide - Sinks and Washroom Fixtures
shutterstock image
RESISTANCE CHART - Substance,
Conditions, Strength and Temperature
T316 T304 T302
Acetic Anhydride (90%, aerated, 180 degrees F)
B
C
C
Aluminum Fluoride (5%, 70 degrees F)
B
C
C
Aluminum Sulfate (10%, boiling)
A
B
B
Ammonium Bromide (5%, 70 degrees F)
B
C
C
Ammonium Sulfate (10%, boiling)
A
B
B
Bleaching Powder (dry)
A
C
C
Butyric Acid (saturated, boiling)
A
B
B
Calcium Bisulfite (aqueous solution, 300 lbs.
pressure, 390 degrees F)
B
C
C
Calcium H droxide (50%, boiling)
B
C
C
Calcium Hypochlorite (saturated, 70 degrees F)
A
C
C
Chloracetic Acid (70 degrees F)
B
C
C
Chlorine Gas (moist, 70 degrees F)
B
C
C
Chromic Acid (50%, boiling)
B
C
C
Ferric Chloride 1%, 70 degrees F)
B
C
C
Fluosilicic Acid 90%, 70 degrees F)
B
C
C
Formic Acid (10%, 180 degrees F)
A
C
C
Hydrochloric Acid (1% or less, 70 degrees F)
B
C
C
Iodine (dry, 70 degrees F)
A
C
C
Lactic Acid (10%, 150 degrees F)
B
C
C
Mercuric Chloride (2%, 70 degrees F)
B
C
C
Oxalic Acid (2.5%, 180 degrees F)
A
C
C
Phosphoric Acid (80%, 230 degrees F)
B
C
C
Salt Brine (70 degrees F)
A
C
C
Sauerkraut Brine (70 degrees F)
A
C
C
Sodium Hydroxide (melting, 600 degrees F)
B
C
C
Stannic Chloride (5%, 70 degrees F)
B
C
C
Sulfuric Acid (5%, 100 degrees F)
A
C
C
Zinc Chloride (saturated, 70 degrees F)
B
C
C
CHEMICAL DATA
A = fully resistant, B = fairly resistant, C = not resistant.
The chemical data above should be used as a guide to
determine the type of stainless steel that will be appropriate for the
application. The rating system denotes the level of resistance to
corrosion for the different types of stainless steel. For applications
involving chemicals or conditions not listed, please consult your local
Franke Commercial Systems sales representative.
3
CORROSION
RESISTANCE
INFORMATION
Corrosion, or rusting, often reported soon after installation,
has two main causes:
Contact Corrosion occurs when a piece of common
carbon steel, copper, brass or other foreign material contacts the sink and destroys the passive protective film.
Pitting or Pinhole Corrosion occurs when chlorides
attack the steel forming pits where galvanic cells are created. Acid chlorides are particularly severe, but even chlorine bleach can cause failure. The sink should be rinsed
thoroughly after such contact. Type 316 steel should be
specified if the sink will be subject to such conditions
In the presence of oxygen, stainless steel forms a protective
chromium oxide layer.
This is due to the addition of chromium in excess of 11.5%
during the alloying stage. The further addition of nickel, in
excess of 7%, gives superior corrosion resistance to the
300 series. Maximum corrosion resistance is obtained with
the addition of molybdenum to form TYPE 316, designed to
resist attack under highly corrosive conditions.
As implied, stainless steel requires oxygen in order to be
stainless. There are ways to make oxygen more plentiful.
For example, an acid solution which might otherwise corrode
the steel, can be aerated to maintain the protective film.
TYPES OF
STAINLESS STEEL
AND FINISHES
THE TYPES OF STAINLESS STEEL
BOWL & DECK PRODUCT FINISHES
20 gauge, 18-8 stainless steel, Type 302 - A good quality steel
with 18% chromium and 8% nickel content. This type of stainless steel
is typically used for sinks that are 8" deep or less.
Bowl Finishes - Bowl finishes on Franke Commercial Systems
product range from brush to satin. A brush finish, typically found on
vanity basin bowls is easy to clean and has a soft luster. A satin finish
is somewhat more aggressive, with a definite grain line. This type of
finish is practical, particularly in a heavy use application, as any
scratches may be blended into the grain line.
18 gauge, 18-10 stainless steel, Type 304 - A heavier weight
stainless with 18% chromium, and 10% nickel. This type of stainless
steel results in the ability to draw a deeper sink bowl
14 and 16 gauge stainless steel, Type 304 - Most often used in
fabrication of institutional sinks such as kitchen sculleries, wallmount
washup sinks, mop and service sinks. Franke's vandal-resistant
securityware products are fabricated from heavy duty 14 gauge
stainless steel for the utmost in durability.
Type 316 Stainless Steel - A corrosion resistant steel intended for
applications such as labs where acids and other corrosive materials
are present. This stainless contains minimums of 16-18% chromium
and 10-14% nickel. Maximum corrosion resistance is obtained with
the addition of molybdenum to form TYPE 316, designed to resist
attack under highly corrosive conditions.
Deck Finishes - Franke Commercial Systems products have two
distinct finishes by product type.
A mirror finish is standard on our vanity basins as well as on the seat
portions of our toilets. This lustrous finish is very bright and shiny. It is
the most common on faucets and soap dispensers used in public
washrooms.
All of our other commercial products have a satin finish deck, which
will stand up to the rigours of time and repeated use, and the natural
grain of the steel will disguise any scratches acquired from use.
4
STAINLESS STEEL CARE AND MAINTENANCE
Practical experience suggests that using high-quality materials reduces the staining of products
that help maintain the appearance in heavily used washrooms. Thanks to the durable and
hygienic characteristics of stainless steel, it provides clean and safe products for public
washrooms, hospital environments, commercial kitchens and more.
WHAT TO DO!
Brushes with natural or plastic bristles, cotton or synthetic or micro
fibre clothes, leather, sponges, pressure washer, vapour stream
cleaner, toothpaste, household and window-cleaning products and
natural cleaning substances like diluted vinegar (20 % vinegar / 80 %
water) are ideal for cleaning stainless steel.
The best form of maintenance is frequent, regular cleanings. The
best method of preventative maintenance is to ensure that the fixture
is clean, dry and exposed to room atmosphere when not in use. Rinse
and towel dry the fixtures daily in order to minimize major cleanups.
This is of particular importance if potentially corrosive chemicals have
been used.
Keep the fixture free of any standing water, which may build up
mineral deposits. The quality of your water can affect the appearance
and this water quality will vary from building to building.
To clean your stainless product, use the mildest cleaning
procedure that will do the job effectively. On mirror finish (shiny)
products we recommend using either a liquid detergent or Peek(TM)
with a soft cloth. DO NOT USE ANY ABRASIVE MATERIALS ON THE
MIRROR FINISH.
On satin (matte) finishes and/or inside sink bowls we recommend
using a very mild abrasive cleanser such as Old Dutch® or Cameo®.
Any cleaning or scrubbing to remove stubborn stains should follow
the direction of the grain line. Any scrubbing across the grain will
show as a scratch. Scrubbing in the same direction as the polish lines
will blend in any surface scratch. We recommend that Scotch-Brite®
pads be used only on satin finishes.
5
Stains and water spots anywhere on the product can be removed
with a small amount of Peek(TM) on a damp cloth. Rub the Peek(TM) over
the surface. Always rinse after using a cleaning agent, and wipe dry to
discourage any water spotting.
WHAT NOT TO DO!
We don’t recommend that you use chlorine bleach to clean stainless
steel, as chlorine will attack the protective layer that makes stainless
steel truly stainless. The risk of damage is proportional to the
concentration of the chlorine and the duration of exposure between
the fixture and chlorine agent. Always dilute any antibacterial
product used and wipe up any spills. Note: some antibacterial soaps
contain a chlorine compound.
The unique properties of stainless steel are dependent upon exposure
of the surface to the atmosphere. Do not leave any utensils in a
sink overnight, as they will trap water underneath or leave a residue
of small iron particles which could lead to staining and discoloration
of the surface. They may not even be readily visible, but they most
certainly will lead to corrosion. Any signs of rust can be remove with
non metallic Scotch-Brite® scouring pads, but do not scrub across
the grain. For similar reasons do not leave any mild steel, or cast iron
cookware or implements, anywhere on a stainless steel surface for
extended periods of time.
Steel wool, metallic scouring pads, abrasive, grinding and polishing
powder as well as sand paper should never be used on a stainless
steel surface as they can damage or scratch it.
LIMITED BUYER WARRANTY
Every Franke Commercial Systems sink is guaranteed to be suitable for any normal purpose for
which it is intended and without defects in material or workmanship for the following periods of
time, provided it has been installed and maintained according to Franke Commercial Systems'
instructions.
□□Stainless steel drop-in sinks
5 year warranty
□□Stainless steel Rodan and Xinox washroom accessories
5 year warranty
□□Stainless steel urinals
2 year warranty
□□Stainless steel securityware fixtures
5 year warranty
□□Stainless steel securityware fittings
1 year warranty
□□Stainless steel mirrors
5 year warranty on frame and mirror
1 year warranty on tilt mirror hardware
□□Non-chilled drinking fountains
1 year parts warranty
□□Refrigerated drinking fountains
5 year warranty on sealed refrigerated systems
and most component parts
□□Drinking fountain accessories
1 year parts warranty
If a product is defective for normal purposes Franke Commercial Systems
will provide to the buyer free of charge a replacement product of equal
model. A product can be repaired or replaced by returning it to the place
of purchase. All costs of such replacement shall be borne by the buyer.
Franke Commercial Systems shall not be liable under this warranty where
the product has been used for abnormal purposes or improperly installed
or has damage resulting from abuse such as heavy impact, dropped
objects or otherwise. Franke Commercial Systems shall not be liable for
any inconvenience or expense for material or labour related to removal or
replacement of the defective product, or for any loss or damage to any
person or property whatsoever resulting from the defective product.
Any nonstandard stainless mirror application will void the warranty, unless
previously approved by Franke
Kindred Canada Limited. Some of these include but are not limited to, the
use of ammonia cleaners, exposure to chemicals, mirror adhesives and
areas of high humidity.
The provisions of this warranty are not transferable and are in addition to
and not in modification of or subtraction from any applicable statutory
warranties, rights or remedies.
Some provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
This warranty gives specific legal rights, and you may also have other
rights which vary from province to province.
□□Custom and fabricated products
1 year warranty
6
GENERAL
INFORMATION
EZ TORQUE™ Fastening System
FRANKE
TM
The new standard in sink installation
5 times faster in 2 easy steps!
This new method replaces the industry standard’s universal mounting system which hasn’t changed much over the past thirty years. Finally a solution that focuses on sink installation, making it
faster and easier to get the job done right, in less time than the competition!
Franke EZ Torque fasteners are a new and innovative top mount sink
fastening solution used to secure the rim of the sink ledge tight to the
countertop. This method was developed in North America by a
Canadian engineer, Colin Wisniewski, at the Franke Kindred Canada
manufacturing plant. The development was borne out of his experience installing a few sinks. He recognized there was a need to speed
up and and simplify the installation saving time and effort. This is
particularly important for the commercial industry where many sinks
will be installed on one job. Projects such as classroom installations
or stadium jobs all rely on proficiency. Mr. Wisniewski’s experience
morphed into a replacement for the existing industry standard
universal style of sink fastening clip.
The long standing tradition has been for an installer to hang the
supplied fasteners at specified locations around the sink ledge as
indicated in the instructions. Although fasteners and instructions are
included within the product box, sometimes items go missing on the
job site which can negatively impact the process. The sink and clips
must be carefully lowered through a cut-out hole in the countertop,
being sure not to knock off any of the dangling clips in the process.
Once in place a drill is held in one hand while the other is used to
locate and steady each clip from underneath to tighten. This method
can be sloppy and force the installer to kneel down, hunch over or
even lay down, underneath the cabinet to locate, hold steady and
finally tighten the fasteners.
N
NEW
ATIO
V
INNO
7
EAOU
V
N
U
ATI
NO
V
O
NN
I
All new for 2014, Franke EZ Torque fasteners ship pre-installed on the
sink! Simply drop the sink quickly and neatly into the cut-out. This
simplifies and streamlines sink installation and almost eliminates the
need for instructions. It is no longer necessary to read where to
fasten the clips onto the sink, and missing clips are no longer an
issue. The fastener's red colour makes it easy to locate inside the
cabinet. It’s patented and revolutionary design allows you to tighten
the clips with one hand through the entire installation process. That’s
it, installing a sink with EZ Torque is quick and easy.
Installing a sink has never been faster, or easier. Franke's EZ Torque
robust design, steel components, and high-quality polymer resin
together produce a fastener superior in strength and performance
allowing you to get the job done right, without hassle, in less time
than the competition.
GENERAL
INFORMATION
The new standard in sink installation
5 times faster, in 2 easy steps
FRANKE
N
NOEVW
ATIO
INN
TM
VETA
U
O
N NNOVA IO
I
EZ TORQUE™
An innovative fastening system to secure rim of sink to countertop.
- Clamps are factory installed on topmount sinks
- No parts to attach or lose
- No waiting for replacements
- Drop sink into countertop, then tighten clamps with drill


Contact your sales representative for more information or visit
www.franke-commercial.com/EZ
8
ANOTHER FRANKE INNOVATION
A
KEN
N
A
FR VATIO
INNO
UNE ION
Canada's
VAT1st
O
N
N
I
KE
Z8000 Compliant
HandFHygiene
Sink Series
RAN
In 2012, Franke's commercial division - Commercial Systems - introduced a new series of sinks
for the healthcare industry. When infectious disease control became top-of-mind for admin-
istrators at hospitals and healthcare facilities, one of the frontline tools put in place to
help control infection — hand wash stations —ironically has now been identified as the
culprit in several instances where infectious disease has caused not only illness and expense, but also loss of life. With the release of its Z8000
Health Care Facilities Standard in November of 2011, the Canadian Standards Association (CSA) clearly defined specifications for the design and
construction of hospitals and other health care facilities, all aimed at increasing health and safety, and limiting the spread of illness. Franke
manufactures hand wash basins which not only meet Z8000 standards, but offer the additional benefit of SANIGUARD® technology. Franke’s
basins represent solid research and development, superior engineering, and an ‘above and beyond’ approach to the Z8000 requirements.
What is Z8000?
- Canadian Health Care Facilities document
- Developed by 32 CSA members
- Took four years to compile
- Contains over 400 pages of evidence-based recommendations
- Covers all aspects of healthcare design, including planning, construction and facility layout
- Applies to hospitals, clinics, long-term care facilities, etc.
This standard will be instrumental in shaping both new construction and
renovations of Canadian health care facilities. Franke is proud to
manufacture sinks that not only meet but exceed the stringent criteria
outlined in Z8000. We are dedicated to creating a product line that will
make our healthcare facilities a safer environment for everyone.
9
What makes our sinks compliant?
- They are made of hygienic, robust stainless steel.
- They contain splashing and eliminate free standing water.
- They eliminate areas for bacteria to grow.
- They are easy and efficient to install.
Z8000 compliant models:
HWS1414P-00
HWS1420P-00
HWS1518P-00
HWSS1518P-00
SANIGUARD® PRODUCT PROTECTION
SANIGUARD® antimicrobial product protection is applied to our Clinical Hand Wash basins as
well as to our Premium Surgical Scrub Stations to protect the product from the growth of bacteria, mold, mildew and fungi that can cause odours and staining, in hospitals, clinics, and other
medical facilities.
SANIGUARD® product protection is an invisible, food-safe,
odourless coating applied to all exposed surfaces on the Clinical
Hand Wash basins and Premium Surgical Scrub Stations models.
SANIGUARD® product protection is available as a custom coating
for most Franke Commercial sinks; however, it is only recommended
for use in hand washing applications. The use of sharp utensils or
heavy equipment can chip and mar the treated surface. To receive a
quotation on the application of SANIGUARD® product protection to
other Franke Commercial products, please contact our Customer
Service Representatives by e-mail to ws-info.ca@franke.com or
by fax 1-866-227-3050.
How does it work? When microbes come into contact with a
surface treated with SANIGUARD® product protection, the
inorganic, silver ion technology actively inhibits their growth by
hindering cell wall transmissions, disrupting cell metabolism, and
interfering with cellular reproduction.
What are the benefits of this coating on a stainless steel sink?
SANIGUARD® product protection is effective against most common
bacteria, yeasts, molds, and fungi that cause stains, odours and
product deterioration. In addition, SANIGUARD® product protection
makes products easier to clean and keep them cleaner and fresher
between cleanings. Under normal cleaning conditions, the
SANIGUARD® coating will provide continuous antimicrobial product
protection for the useful life of the product.
Please note: SANIGUARD® product protection is designed to protect
the product itself and will not protect the user or others from
food-borne illness or disease. Always follow proper hygienic and
cleaning procedures when using this product.
How to clean SANIGUARD® products
Do not use any scouring pads, but instead simply wipe with a soft cloth
and any of the following: bleach, quaternary ammonia, phenol or MEK.
Do not use caustic sodium hydroxide. Do not leave items in the sink over
prolonged periods of time.
10
CUSTOM FABRICATION CAPABILITIES
Franke Commercial Systems has full custom stainless steel fabrication capabilities. We custom
fabricate products to meet our customer’s specifications. Modifications can be made to most of
our standard catalogue products. We offer a wide range of custom products.
All of our custom fabricated products are polished to a #4 satin finish
and can be made to meet the material specification you require (T304
or T316, 14 to 18 gauge). Continuous weld construction is available
for pharmaceutical applications if required.
If you can sketch it, we can build it. As a general rule of thumb, the
more information we receive with custom fabricated product
requests, the better! The following pages provide explicit details for
requesting specific types of custom fabricated products.
□□Countertops
□□Topmount & Undermount Sinks
□□Drainboard Sinks
□□Scullery Sinks
□□Wall Mount Hand Wash Stations
□□Surgical Scrub Stations
□□Mop Sinks (Janitorial)
11
SANIGUARD® Product Protection
The addition of SANIGUARD® product protection is available for sinks
in this catalogue as well as custom fabricated sinks. However, we only
recommend this coating be added to hand wash basins. See our
SANIGUARD® Information page for more
details about this product protection. For a
quotation please call our Customer Service
Representatives directly.
(Canada) 1-855-446-5663
ws-info.ca@franke.com
GENERAL
INFORMATION
Custom Sinks and Sinks with Drainboards CHECKLIST
BUILD YOUR SINK
Application
□
Drain Fitting:
Drop-In
□
Undermount
□
No
With Faucet Ledge:
□
Yes
□ 3 1/2" (includes 1130 waste fitting)
□ 1 1/4" (accepts 1 1/4" drain, not included)
□ Other
NOTE: Type 316 wastes are supplied with Type 316 sink bowls.
SINK BOWL #1
Compartment Size
Drain Position:
Left-to-Right
Front-to-Back:
Depth
Position (if multiple bowls)
□ Center □ Center-Back
□ Back-Right □ Back-Left
Additional Drain Options:
□
□
□
Integral Overflow
Standpipe (1 1/2" drains only)
Standpipe & Corner Guard (1 1/2" drains only)
Drainboard:
Is a sloped drainboard
required:
SINK BOWL #2 (if required)
□ Left
□ Left & Right
Note: Drainboard measures 21" left to right.
Compartment Size
Left-to-Right
Front-to-Back:
Depth
□ None
□ Right
SINK BOWL #3 (if required)
Overall Dimensions
Compartment Size
Depth
Allow a minimum of 4" for faucet ledge
Type of Stainless Steel
Steel Gauge
Allow a minimum of 1" for rims
Left-to-Right
Front-to-Back:
□ T304
□ 18
□ Other
□ T316
□ 16
Front-to-Back:
□ 14
Left-to-Right:
Faucet Hole Drilling Requirements:
NOTE: Please include the location of the holes, the number of holes
required and the diameter of the holes. Provide a sketch if necessary.
Bowl Radius:
Only 1" bowl radius is available.
12
GENERAL
INFORMATION
Custom Countertop CHECKLIST
Tops are available in all sizes and configurations, with sink bowls
integrally welded into the
top.
Tops may be flat or slope to the sink. All
sloped tops have a 6mm drop to the sink
bowl.
B. THE COUNTERTOP DETAILS:
A. THE SINK COMPARTMENT SPECIFICATIONS:
Compartment Size
Depth
The position of the sink compartments will be centered horizontally
unless specified otherwise.
Left-to-Right
Front-to-Back:
□ T304
□ T316
Steel Gauge
□ 18
□ Other
□ 16
Drain Fitting:
□ 14
□ Other
Drain Position:
Backsplash Location(s):
□ Left
Overall Dimensions of the top:
Allow a minimum of 2" for rims
Allow a minimum of 1 1/2" for splashes
Allow a minimum of 4" for faucet ledge
Left-to-Right:
Top is to be installed onto:
□
Cabinet - existing or supplied by others
□
Cabinet - to be supplied by Commercial Systems
(please provide sketch)
□
□
Legs
Material: □ Stainless Steel
Wall with wall hanger and wall mount brackets
Dimension from floor to work surface:
Core Material
□ Particle Board
□ Plywood
□ Channel Construction
□ Other (specify)
13
□ Right
Rim Style (see Custom Sink Options page)
Front-to-Back:
Standpipe & Corner Guard (1 1/2" drains only)
□ Back
Backsplash Style (see Custom Sink Options page)
□
□
□
Standpipe (1 1/2" drains only)
□ Slope to the sink
Backsplash Height(s):
Additional Drain Options:
Integral Overflow
□ Flat
Top should be:
NOTE: the maximum sloped area that can be created from the sink bowl
outward is 32" (81cm). The remaining top surface to the edge of the sink
will be flat.
□ Chrome Plated
GENERAL
INFORMATION
Custom Scullery Sink CHECKLIST
# of Compartments?
Drainboard Size:
COMPARTMENT SIZE #1
Drainboard Location:
Front-to-Back:
Left-to-Right:
□ 24" left to right (typical)
□ Other (specify)
□ Left
□ Right
□ Left & Right
Rims:
Depth
□ Standard 1 5/8" rolled edges
Type:
□ Other:
COMPARTMENT SIZE #2
Front-to-Back:
Dimensions:
Left-to-Right:
NOTE: Rim options are illustrated at end of this section and online in our
Custom Fabrication Order Form
Depth
COMPARTMENT SIZE #3
Front-to-Back:
Back ledge for deckmount faucet:
Left-to-Right:
Size:
Depth
Steel Gauge
□ Type 304
□ Type 304, all radius coved corners
□ Type 316, always all radius coved corners
□ 18
□ 16
□ 14
□ Other (specify)
□ Yes
□ No
□ 4" (typical)
□ Other
Backsplash:
Backsplash Location(s):
□ Back
□ Left
□ Right
Backsplash Height(s):
Backsplash Style:
Overall Dimensions (Allow 1 5/8" per edge):
Drain Fitting:
□ 1 1/2" duplex complete with stand pipe and guard
□ Other (specify)
Front-to-Back:
Left-to-Right:
# of Legs:
Leg Height:
□ Standard 35"
Other (specify)
Faucet Hole Drilling Requirements:
Please advise
Drain Position:
1_ the location of the holes
2_ the number of holes required
3_ and the size of the holes
Provide a sketch if necessary.
14
GENERAL
INFORMATION
Other Custom Products
Service Sinks
Pedestals/Wall Hung Basins
Wall Mount Trough Sinks
For customization of any of our standard catalogue
products, please provide us with a sketch or a copy of our
specification sheet indicating all changes and modification
required.
Mop Sinks
Sewage Sampling Sinks
15
GENERAL
INFORMATION
Custom Sink OPTIONS
Back / Side Splash Options
Rim Style Options
(
"
16
GENERAL
INFORMATION
General Information
Hole Drilling Configurations - Single, Double and Triple Sinks
SINGLE LEDGEBACK
ø1 1/2"
(38mm)
4" (102mm)
/1
1 hole
ø1 1/2"
(38mm)
8" (204mm)
/2
2 hole, 4" centerset
/3
DOUBLE LEDGEBACK
8" (204mm)
ø1 1/2" (38mm)
/1
1 hole
12" (306mm)
/3
ø1 1/2" (38mm)
/4
3 hole, 8" centerset, plus 1 hole 4" to the right
TRIPLE LEDGEBACK
ø1 1/2" (38mm)
/1
1 hole
8" (204mm)
ø1 1/2"
(38mm)
/3
12" (306mm)
ø1 1/2" (38mm)
/4
3 hole, 8" centerset, plus 1 hole 4" to the right
17
ø1 1/2"
(38mm)
ø1 1/2"
(38mm)
CLASSROOM - LBLS SERIES
8" (204mm)
ø1 1/2" (38mm)
CLASSROOM - LHS SERIES
ø1 1/2"
(38mm)
ø1 1/2"
(38mm)
ø1 1/2"
(38mm)
ø1 1/8"
(29mm)
ø1 1/8"
(29mm)
/2
1 hole
bubbler hole on left ledge
8"
(204mm)
ø1 1/8"
(29mm)
ø1 1/8"
(29mm)
/2R
1 hole
bubbler hole on right ledge
/4
/4R
ø1 1/2"
(38mm)
ø1 1/2"
(38mm)
ø1 1/8"
(29mm)
8" (204mm)
ø1 1/2" (38mm)
ø1 1/2"
(38mm)
ø1 1/8"
(29mm)
/2
1 hole
1 hole
ø1 1/2"
(38mm)
/2DR
Diagonal Punching
1 hole
/4
CLASSROOM - LRS SERIES
ø1 1/8"
(29mm)
ø1 1/8"
(29mm)
/1
1 hole
8" (204mm)
ø1 1/2"
(38mm)
8"
(204mm)
4"
(102mm)
ø1 1/2"
(38mm)
/2
/2DL
Diagonal Punching
1 hole
CLASSROOM - LBLR SERIES
ø1 1/2" (38mm)
ø1 1/2"
(38mm)
/4L
1 bubbler hole on left ledge
ø1 1/2"
(38mm)
ø1 1/8"
(29mm)
ø1 1/8"
(29mm)
/2L
1 hole
CLASSROOM - LBRS SERIES
8"
(204mm)
ø1 1/2"
(38mm)
ø1 1/8"
(29mm)
ø1 1/8"
(29mm)
/3
/3R
2 single holes
bubbler hole right ledge
ø1 1/2" (38mm)
ø1 1/8"
(29mm)
/3L
2 single holes
bubbler hole left ledge
/5R
3 hole, 8" centerset, 1 hole left
bubbler hole right ledge
8" (204mm)
ø1 1/2"
(38mm)
ø1 1/8"
(29mm)
/5L
3 hole, 8" centerset, 1 hole right
bubbler hole left ledge
BUBBLER HOLE DETAIL
ø1 1/8"
(29mm)
ø1 1/2"
(38mm)
18
GENERAL
INFORMATION
General Information
Hole Drilling Configurations - Classroom Sinks
GENERAL
INFORMATION
General Information
Drain Parts and Fittings
VIEW / DRAWING
TYPE / MODEL
integral Waste Assembly
NEW 1047
Complete with T316 shank, shank gasket, brass shank nut, brass tailpiece
nut and nylon tailpiece gasket. For 1 1/2" (38 mm) wastes.
Waste Fitting
3 1/2" (89mm) crumb cup strainer. Complete with 1 1/2" x 3" (38mm x 76
mm) brass tailpiece. Twist seal crumb cup. Certified to ASME A112.18.22005/CSA B125.2-2005.
1130
Type 302 stainless steel
(single unit)
1130/60
(60/case)
1120/316
Type 316 (EN1.4401 17/12/2) stainless steel strainer and tailpiece, for
enhanced corrosion resistance
3-1/2" (89mm) vandal resistant grid
1300G
1200/316G
type 316 (EN1.4401 17/12/2) stainless steel strainer and tailpiece, for
enhanced corrosion resistance
1 1/2" (38mm) waste
100-1/302
100
200/316
100-1/302
Perforated grid for 1 1/2" drain
100
1-1/2" (38mm) duplex waste fitting, type 302 (CNS 18/8) stainless steel,
complete with 1 1/2"(DN38) x 3"(76.2mm) stainless steel tailpiece and
rubber stopper
200/316
1-1/2" (38mm) duplex waste fitting, type 316 (EN1.4401 17/12/2)
stainless steel, complete with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2)
stainless steel tailpiece and rubber stopper
1 1/2"(38mm) vandal resistant grid
200/316-NR
1-1/2"(38mm) waste fitting, type 316 (EN1.4401 17/12/2) stainless steel,
complete with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel
tailpiece
100-NR
1-1/2"(38mm) waste fitting, type 302 (CNS 18/8) stainless steel,
complete with 1 1/2"(DN38) x 3"(76.2mm) brass tailpiece
19
Drain Parts and Fittings
VIEW / DRAWING
TYPE / MODEL
Waste Fitting
1-1/4" (32mm) grid strainer with removable tailpiece. ASME A112.18.22005/CSA B125.2-2005
125GOWK
with overflow
125GWK
no overflow
Model shown is with overflow
NEW
125GWK-MOD
for model WHB5222 only
Standpipe
Standpipe for 1 1/2" (38mm) wastes. Type 304 18/10 stainless steel.
310-1
10" (254mm) long
312-1
12" (304mm) long
Tailpiece locknut
Brass locknut
315-7
Tailpiece Gasket
Nylon gasket for 1 1/2" (38 mm) tailpiece
315-8
Waste Fitting
1-1/2" x 3" (38mm x 76mm) tailpiece
315-9
stainless steel
315-9/316
type 316 (EN1.4401 17/12/2) stainless steel
OF100
OF100-VAN
Overflow Components
OF100
1-1/2" connection overflow components for 3-1/2" or 1-1/2" waste fitting
(sink with suffix: -2)
OF100-VAN
for 1-1/4" connection overflow for vanity basins
20
GENERAL
INFORMATION
General Information
21
Without faucet ledge - 20 gauge
TYPE / MODEL
SINGLE
TOPMOUNT SINKS
VIEW / DRAWING
Topmount Sink
Single compartment self rimming topmount sink less faucet ledge. 20
gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces
are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template,
and factory installed EZ TORQUE™ fasteners. Certified to ASME
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. S9106-1)
-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
WASTE LOCATION
C = center
CB = center back
OVERALL DIMENSIONS
MODEL
SINK COMPARTMENT DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
●
S9106-1
11 1/4" (286 mm)
13 5/8" (346 mm)
9 1/4" (235 mm)
11 5/8" (295 mm)
6" (152 mm)
C
N/A
●
S9106-3
11 1/4" (286 mm)
13 5/8" (346 mm)
9 1/4" (235 mm)
11 5/8" (295 mm)
6" (152 mm)
C
N/A
S9407-1
11 5/8" (295 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
N/A
S4206-1
16 1/8" (410 mm)
14 1/8" (359 mm)
14" (356 mm)
12" (305 mm)
6" (152 mm)
CB
N/A
S6408-1
18 1/8" (460 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
N/A
S6808-1
18 1/8" (460 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
N/A
S6810-1
18 1/8" (460 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
C
N/A
S7308-1
19 1/4" (489 mm)
25 1/4" (641 mm)
17" (432 mm)
23" (584 mm)
8" (203 mm)
CB
N/A
22
SINGLE
TOPMOUNT SINKS
Without faucet ledge - 18 gauge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
are #4 satin finished. Includes waste fitting, factory applied rim seal,
cutout template, and factory installed EZ TORQUE™ fasteners. Certified to
ASME A112.19.3-2008 / CSA B45.4-08. WASTE SIZE (Indicated in model number, eg. S6410PCB-1)
-1 = 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
-2 = 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
and integral overflow kit
WASTE LOCATION
C = center
CB = center back
WHEELCHAIR ACCESSIBLE MODELS
•5" deep models indicated meet ADA (Americans with disabilities act
guidelines), ANSI A117.1 (Accessible and usable buildings and facilities),
and CSA B651-04 (Accessible design for the built environment). Check
local codes to ensure compliance.
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
AS6105P-1
18 1/8" (460 mm)
23 1/8" (587 mm)
16" (406 mm)
21" (533 mm)
5" (127 mm)
CB
N/A
S6108P-1
18 1/8" (460 mm)
23 1/8" (587 mm)
16" (406 mm)
21" (533 mm)
8" (203 mm)
CB
N/A
S6410PCB-1
18 1/8" (460 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
10" (254 mm)
CB
N/A
S7310P-1
19 1/4" (489 mm)
25 1/4" (641 mm)
17" (432 mm)
23" (584 mm)
10" (254 mm)
CB
N/A
S7312P-1
19 5/8" (498 mm)
25 5/8" (651 mm)
17 1/2" (445 mm)
23 1/2" (597 mm)
12" (305 mm)
C
N/A
S7312P-2
19 5/8" (498 mm)
25 5/8" (651 mm)
17 1/2" (445 mm)
23 1/2" (597 mm)
12" (305 mm)
C
N/A
S7314P-1
19 5/8" (498 mm)
25 5/8" (651 mm)
17 1/2" (445 mm)
23 1/2" (597 mm)
14" (356 mm)
C
N/A
S8014P-1
20 1/8" (511 mm)
22 1/8" (562 mm)
18" (457 mm)
20" (508 mm)
14" (356 mm)
C
N/A
MODEL
●
23
With faucet ledge - 20 gauge
TYPE / MODEL
SINGLE
TOPMOUNT SINKS
VIEW / DRAWING
Topmount Sink
Single compartment self rimming topmount sink with faucet ledge. 20
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated by model number eg LBS9106-1)
-1 = 3 1/2" (89 mm) crumb cup waste assembly
-2 = 3 1/2" (89 mm) crumb cup waste assembly with integral overflow kit
-3 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1
1/2" (DN38) brass tailpiece
WASTE LOCATION
C = center
CB = center back
LR = left rear
FAUCET HOLE OPTIONS (STANDARD)
When ordering a model number, indicate which faucet hole option is
required by adding the following to the end of the model number; (eg.
LBS9106-1/2)
/1 = 1 hole, 1 1/2" diameter
/2 = 2 hole, 4" centerset, 1 1/2" diameter
/3 = 3 hole, 8" centerset, 1 1/2" diameter
/4 = 4 hole, as 3 hole above, plus 1 hole 4" to the right
CUSTOM FAUCET HOLES
Custom faucet hole drillings are available on all models. Order model as
indicated in chart below, specifying all necessary hole drilling information.
Sinks with custom drillings are non-returnable.
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
LBS9106-1
13 3/4" (349 mm)
13 5/8" (346 mm)
9 1/4" (235 mm)
11 5/8" (295 mm)
6" (152 mm)
C
1, 2
LBS9106-3
13 3/4" (349 mm)
13 5/8" (346 mm)
9 1/4" (235 mm)
11 5/8" (295 mm)
6" (152 mm)
C
1, 2
LBS9407-1
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
1, 2
LBS9407-3
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
1, 2
LBS1306-1
15 7/16" (392 mm)
15 1/8" (384 mm)
11" (279 mm)
13" (330 mm)
6" (152 mm)
C
1, 2
LBS2708-1
17" (432 mm)
19 1/8" (486 mm)
12" (305 mm)
17" (432 mm)
8" (203 mm)
C
1, 3
1, 3
MODEL
LBS4607-1
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
7" (178 mm)
C
●
ALBS6405-1
20 9/16" (523 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
5" (127 mm)
CB
1, 3
●
ALBS6805-1
20 9/16" (522 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
5" (127 mm)
LR
1, 3
LBS6807-1
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
7" (178 mm)
CB
1, 3
LBS6807-2
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
7" (178 mm)
CB
1, 3
LBS6808-1
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
1, 3
LBS6808-2
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
1, 3
LBS6810-1
20 9/16" (522 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
C
1, 3
LBS7508-1
22" (559 mm)
17 1/4" (438 mm)
17" (432 mm)
15" (381 mm)
8" (203 mm)
CB
1, 3
LBS7308-1
22 1/16" (560 mm)
25 5/8" (651 mm)
17" (432 mm)
23" (584 mm)
8" (203 mm)
CB
1, 3, 4
24
SINGLE
TOPMOUNT SINKS
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Wheelchair accessible, single compartment, self rimming topmount sink
with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless
steel. Exposed surfaces are #4 satin finished. Undercoated to reduce
condensation and resonance. Includes waste fitting, factory applied rim
seal, cutout template, and factory installed EZ TORQUE™ fasteners.
Certified to ASME A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. ALBS9405P-1)
-1 = 3 1/2" (89 mm) crumb cup waste assembly
WASTE LOCATION
C = center
CB = center back
LR = left rear
ALBS9405P-1/2)
/1 = 1 hole, 1 1/2" diameter, centered over waste
/2 = 2 hole, 4" centerset, 1 1/2" diameter, centered over waste
CUSTOM FAUCET HOLES
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
●
ALBS9405P-1
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
5" (127 mm)
C
1, 2
●
ALBS9406P-1
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
6" (152 mm)
C
1, 2
LBS9408P-1
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
8" (203 mm)
C
1, 2
●
ALBS1305P-1
15 7/16" (392 mm)
15 1/8" (384 mm)
11" (279 mm)
13" (330 mm)
5" (127 mm)
C
1, 2
●
ALBS1306P-1
15 7/16" (392 mm)
15 1/8" (384 mm)
11" (279 mm)
13" (330 mm)
6" (152 mm)
C
1, 2
LBS1308P-1
15 7/16" (392 mm)
15 1/8" (384 mm)
11" (279 mm)
13" (330 mm)
8" (203 mm)
C
1, 2
●
ALBS2705P-1
17" (432 mm)
19 1/8" (486 mm)
12" (305 mm)
17" (432 mm)
5" (127 mm)
C
1, 3
●
ALBS2706P-1
17" (432 mm)
19 1/8" (486 mm)
12" (305 mm)
17" (432 mm)
6" (152 mm)
C
1, 3
LBS2708P-1
17" (432 mm)
19 1/8" (486 mm)
12" (305 mm)
17" (432 mm)
8" (203 mm)
C
1, 3
ALBS4405P-1
18 13/16" (478 mm)
16 1/8" (410 mm)
14" (356 mm)
14" (356 mm)
5" (127 mm)
CB
1, 3
ALBS4406P-1
18 13/16" (478 mm)
16 1/8" (410 mm)
14" (356 mm)
14" (356 mm)
6" (152 mm)
CB
1, 3
LBS4408P-1
18 13/16" (478 mm)
16 1/8" (410 mm)
14" (356 mm)
14" (356 mm)
8" (203 mm)
CB
1, 3
LBS4410P-1
18 13/16" (478 mm)
16 1/8" (410 mm)
14" (356 mm)
14" (356 mm)
10" (254 mm)
CB
1, 3
ALBS4605P-1
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
5" (127 mm)
C
1, 3
ALBS4606P-1
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
6" (152 mm)
C
1, 3
LBS4608P-1
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
8" (203 mm)
C
1, 3
LBS4610P-1
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
10" (254 mm)
C
1, 3
●
●
25
TYPE / MODEL
OVERALL DIMENSIONS
●
●
●
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
ALBS4005P-1
18 13/16" (478 mm)
22 1/8" (562 mm)
14" (356 mm)
20" (508 mm)
5" (127 mm)
CB
1, 3
ALBS4006P-1
18 13/16" (478 mm)
22 1/8" (562 mm)
14" (356 mm)
20" (508 mm)
6" (152 mm)
CB
1, 3
LBS4008P-1
18 13/16" (478 mm)
22 1/8" (562 mm)
14" (356 mm)
20" (508 mm)
8" (203 mm)
CB
1, 3
LBS4010P-1
18 13/16" (478 mm)
22 1/8" (562 mm)
14" (356 mm)
20" (508 mm)
10" (254 mm)
CB
1, 3
ALBS6405P-1
20 9/16" (523 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
5" (127 mm)
CB
1, 3
ALBS6406P-1
20 9/16" (522 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
6" (152 mm)
CB
1, 3
LBS6408P-1
20 9/16" (522 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
1, 3
LBS6410PCB-1
20 9/16" (522 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
10" (254 mm)
CB
1, 3
ALBS6805P-1
20 9/16" (522 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
5" (127 mm)
LR
1, 3
ALBS6806P-1
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
6" (152 mm)
CB
1, 3
LBS6808P-1
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
1, 3
LBS6810P-1
20 9/16" (521 mm)
20 1/8" (508 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
C
1, 3
ALBS6105P-1
20 13/16" (529 mm)
23 1/8" (587 mm)
16" (406 mm)
21" (533 mm)
5" (127 mm)
CB
1, 3
ALBS6106P-1
20 13/16" (529 mm)
23 1/8" (587 mm)
16" (406 mm)
21" (533 mm)
6" (152 mm)
CB
1, 3
LBS6108P-1
20 13/16" (529 mm)
23 1/8" (587 mm)
16" (406 mm)
21" (533 mm)
8" (203 mm)
CB
1, 3
LBS6110P-1
20 13/16" (529 mm)
23 1/8" (587 mm)
16" (406 mm)
21" (533 mm)
10" (254 mm)
CB
1, 3
ALBS7005P-1
21 13/16" (554 mm)
22 1/8" (562 mm)
17" (432 mm)
20" (508 mm)
5" (127 mm)
CB
1, 3
ALBS7006P-1
21 13/16" (554 mm)
22 1/8" (562 mm)
17" (432 mm)
20" (508 mm)
6" (152 mm)
CB
1, 3
LBS7008P-1
21 13/16" (554 mm)
22 1/8" (562 mm)
17" (432 mm)
20" (508 mm)
8" (203 mm)
CB
1, 3
LBS7010P-1
21 13/16" (554 mm)
22 1/8" (562 mm)
17" (432 mm)
20" (508 mm)
10" (254 mm)
CB
1, 3
ALBS7505P-1
22" (559 mm)
17 1/4" (438 mm)
17" (432 mm)
15" (381 mm)
5" (127 mm)
CB
1, 3
ALBS7506P-1
22" (559 mm)
17 1/4" (438 mm)
17" (432 mm)
15" (381 mm)
6" (152 mm)
CB
1, 3
LBS7508P-1
22" (559 mm)
17 1/4" (438 mm)
17" (432 mm)
15" (381 mm)
8" (203 mm)
CB
1, 3
LBS7510P-1
22" (559 mm)
17 1/4" (438 mm)
17" (432 mm)
15" (381 mm)
10" (254 mm)
CB
1, 3
ALBS7305P-1
22 1/16" (560 mm)
25 5/8" (651 mm)
17" (432 mm)
23" (584 mm)
5" (127 mm)
CB
1, 3, 4
ALBS7306P-1
22 1/16" (560 mm)
25 5/8" (651 mm)
17" (432 mm)
23" (584 mm)
6" (152 mm)
CB
1, 3, 4
LBS7308P-1
22 1/16" (560 mm)
25 5/8" (651 mm)
17" (432 mm)
23" (584 mm)
8" (203 mm)
CB
1, 3, 4
LBS7310P-1
22 1/16" (560 mm)
25 5/8" (651 mm)
17" (432 mm)
23" (584 mm)
10" (254 mm)
CB
1, 3, 4
LBS7312P-1
22 1/16" (560 mm)
25 5/8" (651 mm)
17 1/2" (445 mm)
23 1/2" (597 mm)
12" (305 mm)
C
1, 3, 4
LBS7314P-1
MODEL
●
SINGLE
TOPMOUNT SINKS
VIEW / DRAWING
22 9/16" (573 mm)
25 5/8" (651 mm)
17 1/2" (445 mm)
23 1/2" (597 mm)
14" (356 mm)
C
1, 3
ALBS7805P-1
22" (559 mm)
30 1/8" (765 mm)
17" (432 mm)
28" (711 mm)
5" (127 mm)
CB
1, 3, 4
ALBS7806P-1
22" (559 mm)
30 1/8" (765 mm)
17" (432 mm)
28" (711 mm)
6" (152 mm)
CB
1, 3, 4
LBS7808P-1
22" (559 mm)
30 1/8" (765 mm)
17" (432 mm)
28" (711 mm)
8" (203 mm)
CB
1, 3, 4
LBS8014P-1
23 1/8" (587 mm)
22 1/8" (562 mm)
18" (457 mm)
20" (508 mm)
14" (356 mm)
C
1, 3
26
Faucet & tap NOT SOLD WITH SINK
27
Without faucet ledge
VIEW / DRAWING
TYPE / MODEL
Double compartment self rimming topmount sink less faucet ledge. 20
are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template,
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. D1906-1)
WASTE LOCATION
C = center
CB = center back
•Notes
* Indicates model with Spillway® partition
20 gauge
OVERALL DIMENSIONS
MODEL
D1906-1
D6408-1
D8610-1
*
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
13 3/4" (349 mm)
21 11/16" (551 mm)
11 5/8" (295 mm)
9 1/4" (235 mm)
6" (152 mm)
C
N/A
18 7/16" (468 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
N/A
20 1/8" (511 mm)
35 1/4" (895 mm)
18" (457 mm)
16" (406 mm)
10" (254 mm)
C
N/A
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
18 gauge
OVERALL DIMENSIONS
MODEL
D6410PCB-1
D0814P-1
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
18 1/8" (460 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
10" (254 mm)
CB
N/A
22" (559 mm)
39" (991 mm)
20" (508 mm)
18" (457 mm)
14" (356 mm)
C
N/A
28
DOUBLE
TOPMOUNT SINKS
Topmount sink
VIEW / DRAWING
TYPE / MODEL
Topmount sink
DOUBLE
TOPMOUNT SINKS
Double compartment self rimming topmount sink with faucet ledge. 20
are #4 satin finished. Spillway® between bowls. Undercoated to reduce
condensation and resonance. Includes waste fittings, factory applied rim
WASTE SIZE (Indicated in model number, eg. ALBD6405-1)
WASTE LOCATION
CB = center back
LR = left rear
RR = right rear
ALBD6405-1/3)
/1 = 1 hole, 1 1/2" diameter, centered over partition
/3 = 3 hole, 8" centerset, 1 1/2" diameter, centered over partition
CUSTOM FAUCET HOLES
Custom faucet hole drillings are available on all models. For custom
drillings, order model as indicated in diagram and specify details of faucet
holes required when ordering. Sinks with custom drillings are non-returnable.
NOTES
OVERALL DIMENSIONS
MODEL
●
29
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLE
OPTIONS
ALBD6405-1
*
20 1/2" (521 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
5" (127 mm)
LR, RR
1, 3, 4
LBD6407-1
*
20 1/2" (521 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
7" (178 mm)
CB
1, 3, 4
LBD6408-1
*
20 1/2" (521 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
1, 3, 4
LBD6808-1
*
20 9/16" (522 mm)
39 3/16" (995 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
1, 3, 4
LBD7508-1
*
22" (559 mm)
33 1/4" (845 mm)
17" (432 mm)
15" (381 mm)
8" (203 mm)
CB
1, 3, 4
VIEW / DRAWING
TYPE / MODEL
Double compartment self rimming topmount sink with faucet ledge. 18
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. LBD1308P-1)
-2 = 3 1/2" (89mm) crumb cup strainer, 1 1/2" (DN38) brass tailpiece,
with integral overflow
WASTE LOCATION
C = center
CB = center back
LBD1308P-1/3)
/1 = 1 hole, 1 1/2" diameter, centered over partition
/3 = 3 hole, 8" centerset, 1 1/2" diameter, centered over partition
•5" deep models meet ADA (Americans with disabilities act guidelines),
ANSI A117.1 (Accessible and usable buildings and facilities), and CSA
B651-04 (Accessible design for the built environment). Check local
codes to ensure compliance.
•Notes
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
●
ALBD1305P-1
15 13/16" (402 mm)
29 1/4" (743 mm)
11" (279 mm)
13" (330 mm)
5" (127 mm)
C
1, 3, 4
●
ALBD1306P-1
15 13/16" (402 mm)
29 1/4" (743 mm)
11" (279 mm)
13" (330 mm)
6" (152 mm)
C
1, 3, 4
LBD1308P-1
15 13/16" (402 mm)
29 1/4" (743 mm)
11" (279 mm)
13" (330 mm)
8" (203 mm)
C
1, 3, 4
18 1/4" (464 mm)
26 5/8" (677 mm)
16" (406 mm)
14" (356 mm)
6" (153 mm)
CB
2
●
ALBDC182605P-1
●
ALBD4405P-1
*
18 13/16" (478 mm)
31 1/4" (794 mm)
14" (356 mm)
14" (356 mm)
5" (127 mm)
CB
1, 3, 4
ALBD4406P-1
*
18 13/16" (478 mm)
31 1/4" (794 mm)
14" (356 mm)
14" (356 mm)
6" (152 mm)
CB
1, 3, 4
LBD4408P-1
*
18 13/16" (478 mm)
31 1/4" (794 mm)
14" (356 mm)
14" (356 mm)
8" (203 mm)
CB
1, 3, 4
LBD4410P-1
*
18 13/16" (478 mm)
31 1/4" (794 mm)
14" (356 mm)
14" (356 mm)
10" (254 mm)
CB
1, 3, 4
ALBD6405P-1
*
20 1/2" (521 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
5" (127 mm)
CB
1, 3, 4
ALBD6406P-1
*
20 1/2" (520 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
6" (152 mm)
CB
1, 3, 4
LBD6408P-1
*
20 1/2" (520 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
1, 3, 4
20 13/16" (529 mm)
31 1/4" (794 mm)
16" (406 mm)
14" (356 mm)
10" (254 mm)
CB
1, 3, 4
●
LBD6410PCB-1
●
ALBD7505P-1
*
22" (559 mm)
33 1/4" (845 mm)
17" (432 mm)
15" (381 mm)
5" (127 mm)
CB
1, 3, 4
ALBD7506P-1
*
22" (559 mm)
33 1/4" (845 mm)
17" (432 mm)
15" (381 mm)
6" (152 mm)
CB
1, 3, 4
LBD7508P-1
*
22" (559 mm)
33 1/4" (845 mm)
17" (432 mm)
15" (381 mm)
8" (203 mm)
CB
1, 3, 4
LBD7510P-1
*
22" (559 mm)
33 1/4" (845 mm)
17" (432 mm)
15" (381 mm)
10" (254 mm)
CB
1, 3, 4
LBD7412P-1
22 1/16" (560 mm)
50 1/4" (1276 mm)
17 1/2" (445 mm)
23 1/2" (597 mm)
12" (305 mm)
C
1, 3, 4
LBD0814P-1
25" (635 mm)
39" (991 mm)
20" (508 mm)
18" (457 mm)
14" (356 mm)
C
1, 3, 4
30
DOUBLE
TOPMOUNT SINKS
Topmount sink
31
TYPE / MODEL
18 Gauge Topmount Sink
Triple compartment self rimming topmount sink less faucet ledge. 18
are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory
installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 /
CSA B45.4-08. Overall front to back: 18 1/8" (460 mm)
Overall left to right: 46 3/8" (1178 mm)
Bowl front to back: 16" (406 mm)
Bowl left to right: 14" (356 mm)
Bowl depth: 10" (254 mm)
TRIPLE
TOPMOUNT SINKS
VIEW / DRAWING
T6410PCB-1
center back waste location, includes 3 1/2" (89mm) crumb cup strainer
with 1 1/2" (DN38) brass tailpiece
Triple compartment self rimming topmount sink less faucet ledge. 20
T8610-1
center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1
32
With faucet ledge
VIEW / DRAWING
TYPE / MODEL
Triple compartment self rimming topmount sink with faucet ledge. 20
CSA B45.4-08
TRIPLE
TOPMOUNT SINKS
OVERALL SIZE (Front to back x left to right)
20 9/16" x 46 3/8" (522 x 1178 mm)
COMPARTMENT SIZE (Front to back x left to right x depth)
16" x 14" x 7" (406 x 356 x 178 mm)
•LBT6407CB-1/1 = 1 hole, 1 1/2" diameter
•LBT6407CB-1/3 = 3 hole, 8" centerset, 1 1/2" diameter
•LBT6407CB-1 = Custom (non-returnable)
•For custom please specify drilling requirements.
LBT6407CB-1
CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm)
•LBT6410PCB-1/1 = 1 hole, 1 1/2" diameter
•LBT6410PCB-1/3 = 3 hole, 8" centerset, 1 1/2" diameter, centered over
waste of middle bowl
•LBT6410PCB-1 = Custom (non-returnable)
LBT6410PCB-1
33
With faucet ledge
TYPE / MODEL
CSA B45.4-08. OVERALL SIZE (Front to back x left to right)
22 9/16" x 52 3/8" (573 x 1330 mm)
TRIPLE
TOPMOUNT SINKS
VIEW / DRAWING
COMPARTMENT SIZE (Front to back x left to right x depth)
18" x 16" x 7" (457 x 406 x 178 mm)
•LBT8607-1/1 = 1 hole, 1 1/2" diameter
•LBT8607-1/3 = 3 hole, 8" centerset, 1 1/2" diameter
•LBT8607-1/4 = 4 hole, as above plus 1 hole 4" to the right
•LBT8607-1 = Custom (non-returnable)
LBT8607-1
Triple compartment self rimming drop-in sink with faucet ledge. 18 gauge
(1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4
satin finished. Undercoated to reduce condensation and resonance.
Complete with waste fittings, factory applied rim seal, and factory
CSA B45.4-08
•LBT8610P-1/1 = 1 hole, 1 1/2" diameter
•LBT8610P-1/3 = 3 hole, 8" centerset, 1 1/2" diameter
•LBT8610P-1 = Custom (non-returnable)
LBT8610P-1
34
MAKE IT WONDERFUL
What does it mean?
We want to show the world that Franke can mean making everyday life less ordinary - for business partners and end consumers. Our aim is to highlight the relevance we have with our products in the everyday lives of people around the world. We want to put a smile on the face of
everyone who comes into contact with our products and services. Our new branding is an expression of our passion to organize your everyday routine more efficiently.
But, colourful illustrations and strong words do not cut it. We are determined to work with you to find solutions independently in the event of a
problem. We stand behind our product; we are accountable. Franke is not just a company, but a team of motivated employees and a brand name
recognized around the world for our kitchen systems, commercial systems, coffee systems, and food and beverage systems. Instead of
Commercial Systems or Kitchen Systems in the future, we will be simply be called, Franke.
Where did the idea for these illustrations come from? The line drawings, are a type of "Where's Waldo" picture puzzle which visualize in a
very creative, playful way ideas or musings of all the things that can be done with our products. Doodles are widespread and hugely popular.
Everybody likes to doodle while making telephone calls and during conferences. Doodles are created on any available slip of paper. We do this
while we are busy doing something else. It's part of our nature. Renowned illustrators from around the world were commissioned to create the art.
But, does this style actually suit Franke and its industrial products? Absolutely. Of course, this fresh, emotional brand appearance is
unusual for our industrial environment But...we consciously wanted to create a gentle contrast. Our products are largely used in rather uninspiring places. The doodles with their organic shapes engage in a beautiful interplay with our products and fill our business environment with life.
When we work together, we can
create something wonderful
36
Bubbler NOT SOLD WITH SINK
37
Classroom Sinks
Ledges - back & left
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Single compartment self rimming topmount sink with two adjoining faucet
ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed
surfaces are #4 satin finished. Undercoated to reduce condensation and
resonance. Includes waste fitting, factory applied rim seal, cutout
template, and factory installed EZ TORQUE™ fasteners. Certified to ASME
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. ALBLS4605P-1)
For a 3 1/2" (89 mm) vandal-resistant grid strainer, order separately using
part number 1300G.
WASTE LOCATION
C = center
CB = center back
STANDARD HOLE DRILLING CONFIGURATIONS
CLASSROOM
SINKS
required by adding the # of holes required to the end of the model
number; (eg. ALBLS4605P-1/2)
See standard options by model.
CUSTOM FAUCET HOLES
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
ALBLS4605P-1
18 13/16" (478 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
5" (127 mm)
C
2, 4
ALBLS4606P-1
18 13/16" (478 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
6" (152 mm)
C
2, 4
LBLS4608P-1
18 13/16" (478 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
8" (203 mm)
C
2, 4
ALBLS6406P-1
20 9/16" (523 mm)
18 9/16" (471 mm)
16" (406 mm)
14" (356 mm)
6" (152 mm)
CB
2, 4
LBLS6408P-1
20 9/16" (523 mm)
18 9/16" (471 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
2, 4
ALBLS7005P-1
21 13/16" (554 mm)
24 13/16" (630 mm)
17" (432 mm)
20" (508 mm)
5" (127 mm)
CB
2, 4
ALBLS7006P-1
21 13/16" (554 mm)
24 13/16" (630 mm)
17" (432 mm)
20" (508 mm)
6" (152 mm)
CB
2, 4
LBLS7008P-1
21 13/16" (554 mm)
24 13/16" (630 mm)
17" (432 mm)
20" (508 mm)
8" (203 mm)
CB
2, 4
MODEL
●
●
38
Classroom Sinks
Ledges - back & right
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Single compartment self rimming topmount sink with two adjoining faucet
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. ALBRS4605P-1)
part number 1300G.
WASTE LOCATION
C = center
CB = center back
CLASSROOM
SINKS
number; (eg. ALBRS4605P-1/2)
CUSTOM FAUCET HOLES
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
ALBRS4605P-1
18 13/16" (478 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
5" (127 mm)
C
2, 4
ALBRS4606P-1
18 13/16" (478 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
6" (152 mm)
C
2, 4
LBRS4608P-1
18 13/16" (478 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
8" (203 mm)
C
2, 4
ALBRS7005P-1
21 13/16" (554 mm)
24 13/16" (630 mm)
17" (432 mm)
20" (508 mm)
5" (127 mm)
CB
2, 4
ALBRS7006P-1
21 13/16" (554 mm)
24 13/16" (630 mm)
17" (432 mm)
20" (508 mm)
6" (152 mm)
CB
2, 4
LBRS7008P-1
21 13/16" (554 mm)
24 13/16" (630 mm)
17" (432 mm)
20" (508 mm)
8" (203 mm)
CB
2, 4
MODEL
●
●
39
Classroom Sinks
Ledges - back, left & right
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Single compartment self rimming topmount sink with triple ledge. 18
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. ALBLRS7005P-1)
part number 1300G.
WASTE LOCATION
CB = center back
CLASSROOM
SINKS
number; (eg. ALHS4605P-1/2R)
CUSTOM FAUCET HOLES
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
ALBLRS7005P-1
21 13/16" (554 mm)
27 1/2" (699 mm)
17" (432 mm)
20" (508 mm)
5" (127 mm)
CB
3R, 3L, 5R, 5L
ALBLRS7006P-1
21 13/16" (554 mm)
27 1/2" (699 mm)
17" (432 mm)
20" (508 mm)
6" (152 mm)
CB
3R, 3L, 5R, 5L
LBLRS7008P-1
21 13/16" (554 mm)
27 1/2" (699 mm)
17" (432 mm)
20" (508 mm)
8" (203 mm)
CB
3R, 3L, 5R, 5L
MODEL
●
40
Classroom Sinks
Ledges - opposing
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Single compartment self rimming topmount sink with two opposing faucet
A112.19.3-2008 / CSA B45.4-08.
WASTE SIZE (Indicated in model number, eg. ALHS6405P-1)
part number 1300G.
WASTE LOCATION
C = center
CB = center back
CLASSROOM
SINKS
number; (eg. ALHS4605P-1/2R)
CUSTOM FAUCET HOLES
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
●
ALHS4605P-1
16 1/8" (410 mm)
23 1/2" (597 mm)
14" (356 mm)
16" (406 mm)
5" (127 mm)
C
2R, 2L, 4R, 4L, 2DR, 2DL
●
ALHS4606P-1
16 1/8" (410 mm)
23 1/2" (597 mm)
14" (356 mm)
16" (406 mm)
6" (152 mm)
C
2R, 2L, 4R, 4L, 2DR, 2DL
LHS4608P-1
16 1/8" (410 mm)
23 1/2" (597 mm)
14" (356 mm)
16" (406 mm)
8" (203 mm)
C
2R, 2L, 4R, 4L, 2DR, 2DL
●
ALHS6405P-1
18 1/8" (460 mm)
21 1/2" (546 mm)
16" (406 mm)
14" (356 mm)
5" (127 mm)
CB
2R, 2L, 4R, 4L, 2DR, 2DL
●
ALHS6406P-1
18 1/8" (460 mm)
21 1/2" (546 mm)
16" (406 mm)
14" (356 mm)
6" (152 mm)
CB
2R, 2L, 4R, 4L, 2DR, 2DL
LHS6408P-1
18 1/8" (460 mm)
21 1/2" (546 mm)
16" (406 mm)
14" (356 mm)
8" (203 mm)
CB
2R, 2L, 4R, 4L, 2DR, 2DL
ALHS7305P-1
19 1/8" (486 mm)
30 1/2" (775 mm)
17" (432 mm)
23" (584 mm)
5" (127 mm)
CB
2R, 2L, 4R, 4L, 2DR, 2DL
ALHS7306P-1
19 1/8" (486 mm)
30 1/2" (775 mm)
17" (432 mm)
23" (584 mm)
6" (152 mm)
CB
2R, 2L, 4R, 4L, 2DR, 2DL
LHS7308P-1
19 1/8" (486 mm)
30 1/2" (775 mm)
17" (432 mm)
23" (584 mm)
8" (203 mm)
CB
2R, 2L, 4R, 4L, 2DR, 2DL
ALHS8605P-1
20 1/8" (511 mm)
23 1/2" (597 mm)
18" (457 mm)
16" (406 mm)
5" (127 mm)
C
2R, 2L, 4R, 4L, 2DR, 2DL
ALHS8606P-1
20 1/8" (511 mm)
23 1/2" (597 mm)
18" (457 mm)
16" (406 mm)
6" (152 mm)
C
2R, 2L, 4R, 4L, 2DR, 2DL
LHS8608P-1
20 1/8" (511 mm)
23 1/2" (597 mm)
18" (457 mm)
16" (406 mm)
8" (203 mm)
C
2R, 2L, 4R, 4L, 2DR, 2DL
●
●
41
Classroom Sinks
Ledges - right
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
A112.19.3-2008 / CSA B45.4-08. WASTE SIZE (Indicated in model number, eg. ALRS4605P-1)
part number 1300G.
number; (eg. ALRS4605P-1/2)
CUSTOM FAUCET HOLES
•5" deep models meet ADA (Americans with disabilities act guidelines),
B651-04 (Accessible design for the built environment). Check local
codes to ensure compliance.
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
ALRS4605P-1
16 1/8" (410 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
5" (127 mm)
C
1, 2, 3
ALRS4606P-1
16 1/8" (410 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
6" (152 mm)
C
1, 2, 3
LRS4608P-1
16 1/8" (410 mm)
20 13/16" (529 mm)
14" (356 mm)
16" (406 mm)
8" (203 mm)
C
1, 2, 3
MODEL
●
42
CLASSROOM
SINKS
WASTE LOCATION
C = center
Classroom sinks feature
multiple ledge configurations, depths and widths.
For corrosion resistance, see our
Type 316 offering.
43
Classroom Sinks
Art room - 18 gauge
VIEW / DRAWING
TYPE / MODEL
Art Room Sink
are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory
CSA B45.4-08. WASTE SIZE (Indicated in model number, eg. ART36-1)
-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
-3C = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
CLASSROOM
SINKS
WASTE LOCATION
C = center
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
ART36-1
19 1/8" (486 mm)
38 1/8" (969 mm)
17" (432 mm)
36" (914 mm)
8" (203 mm)
C
N/A
ART48-1
19 1/8" (486 mm)
50 1/8" (1273 mm)
17" (432 mm)
48" (1219 mm)
8" (203 mm)
C
N/A
ART60-1
19 1/8" (486 mm)
62 1/8" (1578 mm)
17" (432 mm)
60" (1524 mm)
8" (203 mm)
C
N/A
ART36-3C
19 1/8" (486 mm)
38 1/8" (968 mm)
17" (432 mm)
36" (914 mm)
8" (203 mm)
C
N/A
ART48-3C
19 1/8" (486 mm)
50 1/8" (1273 mm)
17" (432 mm)
48" (1219 mm)
8" (203 mm)
C
N/A
ART60-3C
19 1/8" (486 mm)
62 1/8" (1578 mm)
17" (432 mm)
60" (1524 mm)
8" (203 mm)
C
N/A
44
45
Undermount Sinks
Single compartment - 18 gauge
TYPE / MODEL
Undermount Sink
Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS
18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout
template, and installation hardware. Certified to ASME A112.19.3-2008 /
CSA B45.4-08.
Wheelchair accessible - Meets ADA (Americans with disabilities act
guidelines) and ANSI A117.1 (Accessible and usable buildings and
facilities). Check local codes to ensure compliance.
Left rear waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2"
(DN38) brass tailpiece.
NOTES
•Vandal resistant waste, reference Waste Options in General Information
Section
UCS6805P-1
UNDERMOUNT
SINKS
VIEW / DRAWING
Undermount Sink
Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS
18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout
CSA B45.4-08.
Center back waste location, 3 1/2" (89mm) crumb cup strainer with 1
1/2" (DN38) brass tailpiece.
NOTES
Section
UCS6808P-1
46
Undermount Sinks
Double compartment - 18 gauge
VIEW / DRAWING
TYPE / MODEL
Undermount Sink
Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS
18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, cutout
CSA B45.4-08.
Center back waste location, includes 3 1/2" (89mm) crumb cup strainer
with 1 1/2" (DN38) brass tailpiece.
NOTES
Section.
UNDERMOUNT
SINKS
UCD6405P-1
Undermount Sink
Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS
18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, cutout
template, and Universal Installation System hardware. Certified to ASME
A112.19.3-2008 / CSA B45.4-08.
Center back waste location, includes 3 1/2" (89mm) crumb cup strainer
with 1 1/2" (DN38) brass tailpiece.
NOTES
Section
UCD6408P-1
47
48
Faucet NOT SOLD WITH SINK
49
Vanity Basins
VIEW / DRAWING
TYPE / MODEL
Vanity Basin
Single compartment self rimming vanity basin less faucet ledge. 18 gauge
(1.2mm), type 304 (CNS 18/10) stainless steel. Mirror finished rim, #4
satin finished bowl. Undercoated to reduce condensation and resonance.
Includes factory applied rim seal, cutout template, and installation
hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
OVERALL DIMENSIONS
MODEL
VANITY SINKS
5" deep models meet ADA (Americans with disabilities act guidelines),
B651-04 (Accessible design for the built environment).
Check local codes to ensure compliance
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE HOLE
SIZE
OVERFLOW
no
●
V1114/5
10 7/8" (276 mm)
14 3/8" (365 mm)
8 1/8" (206 mm)
11 5/8" (295 mm)
5" (127 mm)
1 1/4" (32 mm)
●
V1114/5D
10 7/8" (276 mm)
14 7/8" (378 mm)
8 1/8" (206 mm)
11 5/8" (295 mm)
5" (127 mm)
1 1/2" (38 mm)
no
●
V1418/5
13 3/4" (349 mm)
18 1/4" (464 mm)
11" (279 mm)
15 1/2" (394 mm)
5" (127 mm)
1 1/4" (32 mm)
no
●
V1418/5D
13 3/4" (349 mm)
18 1/4" (464 mm)
11" (279 mm)
15 1/2" (394 mm)
5" (127 mm)
1 1/2" (38 mm)
no
OV1418/6
13 3/4" (349 mm)
18 1/4" (464 mm)
11" (279 mm)
15 1/2" (394 mm)
6" (152 mm)
1 1/4" (32 mm)
front
V1418/6
13 3/4" (349 mm)
18 1/4" (464 mm)
11" (279 mm)
15 1/2" (394 mm)
6" (152 mm)
1 1/4" (32 mm)
no
●
50
Vanity Basins
VIEW / DRAWING
TYPE / MODEL
Vanity Basin
Single compartment self rimming vanity basin less faucet ledge. 18 gauge
VANITY SINKS
B651-04 (Accessible design for the built environment).
Check local codes to ensure compliance
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE HOLE
SIZE
OVERFLOW
●
V17/5
16 3/4" (425 mm)
16 3/4" (425 mm)
14" (356 mm)
14" (356 mm)
5" (127 mm)
1 1/4" (32 mm)
no
●
OV17/5
16 3/4" (425 mm)
16 3/4" (425 mm)
14" (356 mm)
14" (356 mm)
5" (127 mm)
1 1/4" (32 mm)
back
●
V17/5D
16 3/4" (425 mm)
16 3/4" (425 mm)
14" (356 mm)
14" (356 mm)
5" (127 mm)
1 1/2" (38 mm)
no
V17/6
16 3/4" (425 mm)
16 3/4" (425 mm)
14" (356 mm)
14" (356 mm)
6" (152 mm)
1 1/4" (32 mm)
no
OV17/6
16 3/4" (425 mm)
16 3/4" (425 mm)
14" (356 mm)
14" (356 mm)
6" (152 mm)
1 1/4" (32 mm)
front
●
V19/5
18 3/4" (476 mm)
18 3/4" (476 mm)
16" (406 mm)
16" (406 mm)
5" (127 mm)
1 1/4" (32 mm)
no
●
OV19/5
18 3/4" (476 mm)
18 3/4" (476 mm)
16" (406 mm)
16" (406 mm)
5" (127 mm)
1 1/4" (32 mm)
back
●
V19/5D
18 3/4" (476 mm)
18 3/4" (476 mm)
16" (406 mm)
16" (406 mm)
5" (127 mm)
1 1/2" (38 mm)
no
V19/6
18 3/4" (476 mm)
18 3/4" (476 mm)
16" (406 mm)
16" (406 mm)
6" (152 mm)
1 1/4" (32 mm)
no
51
Vanity Basins
With faucet ledge
VIEW / DRAWING
TYPE / MODEL
Vanity Basin
Single compartment self rimming vanity basin with faucet ledge. 18 gauge
required by adding the following to the end of the model number (eg.
V1619/5/3)
/3 = 3 hole, 1 1/8" diameter, 4" centerset
OVERALL DIMENSIONS
MODEL
VANITY SINKS
WHEELCHAIR ACCESSIBLE MODEL
B651-04 (Accessible design for the built environment). Check local codes
to ensure compliance.
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE HOLE
SIZE
OVERFLOW
back
●
OV1619/5
16 3/8" (416 mm)
18 1/2" (470 mm)
11" (279 mm)
15 3/16" (386 mm)
5" (127 mm)
1 1/4" (32mm)
●
V1619/5
16 3/8" (416 mm)
18 1/2" (470 mm)
11" (279 mm)
15 3/16" (386 mm)
5" (127 mm)
1 1/4" (32mm)
no
●
OV1619/6
16 3/8" (416 mm)
18 1/2" (470 mm)
11" (279 mm)
15 3/16" (386 mm)
6" (152 mm)
1 1/4" (32mm)
front
●
V1619/6
16 3/8" (416 mm)
18 1/2" (470 mm)
11" (279 mm)
15 3/16" (386 mm)
6" (152 mm)
1 1/4" (32mm)
no
●
OV1821/5
18" (457 mm)
21" (533 mm)
11 7/16" (291 mm)
18" (457 mm)
5" (127 mm)
1 1/4" (32mm)
back
●
V1821/5
18" (457 mm)
21" (533 mm)
11 7/16" (291 mm)
18" (457 mm)
5" (127 mm)
1 1/4" (32mm)
no
●
OV1821/6
18" (457 mm)
21" (533 mm)
11 7/16" (291 mm)
18" (457 mm)
6" (152 mm)
1 1/4" (32mm)
front
V1821/6
18" (457 mm)
21" (533 mm)
11 7/16" (291 mm)
18" (457 mm)
6" (152 mm)
1 1/4" (32mm)
no
52
Vanity Basins
Undermount
VIEW / DRAWING
TYPE / MODEL
Undermount Vanity Basin
Single compartment undermount vanity basin. 18 gauge (1.2mm), type
304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished.
Undercoated to reduce condensation and resonance. Includes cutout
template and installation hardware. Certified to ASME A112.19.3-2008 /
CSA B45.4-08.
Center back waste location, accepts 1 1/4" (32mm) waste assembly (not
included), integral overflow at back of bowl.
Bowl front to back: 10 15/16" (278 mm)
Bowl left to right: 15 3/16" (386 mm)
VANITY SINKS
OV1317U/5
53
Vanity Basins
Undermount
TYPE / MODEL
template and installation hardware. Certified to ASME A112.19.3-2008 /
CSA B45.4-08.
included), integral overflow at back of bowl.
OV1420U/5
VANITY SINKS
VIEW / DRAWING
54
Vanity Basins
Undermount
VIEW / DRAWING
TYPE / MODEL
template. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
included), integral overflow at front of bowl..
OWB1119U/5 shown
Overall front to back: 11" (279 mm)
Overall left to right: 19" (483 mm)
Bowl depth: 4 1/2" (114 mm)
OWB1119U/5
with overflow
NEW
VANITY SINKS
WB1119U/5
NEW
No overflow, wheelchair accessible. Meets ADA (Americans with
disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings
and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.
template. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
included), integral overflow at front of bowl..
OWB1420U/5 shown
55
OWB1420U/5
with overflow
NEW
WB1420U/5
No overflow
NEW
Vanity Basins
Semi-recessed
VIEW / DRAWING
TYPE / MODEL
Vanity Basin
Single compartment semi-recessed vanity basin less faucet ledge. 18
gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Mirror finished rim,
#4 satin finished bowl. Undercoated to reduce condensation and
resonance. Includes cutout template and installation hardware. Certified
to ASME A112.19.3-2008 / CSA B45.4-08.
Center waste location, accepts 1 1/4" (32mm) waste assembly (not
included), integral overflow at front of bowl.
OV18SR/6
6" (152mm) deep
OV18SR/7
7" (178mm) deep
VANITY SINKS
OV18SR/6
OV18SR/7
56
57
Drainboard Sinks
Single compartment
TYPE / MODEL
Topmount Sink
Single compartment self rimming topmount sink with faucet ledge and
drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel.
Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.32008 / CSA B45.4-08. Please allow 4 weeks for delivery.
DRAINBOARD
21" (530 mm)
LBSDBL6408P-1/3)
/3 = 3 holes, 1 1/2" diameter, 4" centers, 8" centerset
For custom please specify drilling requirements.
NOTES
•Sixth letter in code indicates position of Drainboard (L) left or (R) right
of bowl.
LBSDBR6408P-1
Drain board is located to the right of sink bowl and is sloped for drainage,
LBSDBL6408P-1
Drain board is located to the left of sink bowl and is sloped for drainage,
DRAINBOARD
SINKS
VIEW / DRAWING
58
Drainboard Sinks
Single compartment
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel.
Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.32008 / CSA B45.4-08. Please allow 4 weeks for delivery.
DRAINBOARD
21" (530 mm)
LBSDBL6810P-1/3)
/3 = 3 holes, 1 1/2" diameter, 4" centers, 8" centerset
NOTES
of bowl.
LBSDBR6810P-1
Drain board is located to the right of sink bowl and is sloped for drainage,
DRAINBOARD
SINKS
LBSDBL6810P-1
Drain board is located to the left of sink bowl and is sloped for drainage,
59
Drainboard Sinks
Double compartment
TYPE / MODEL
Topmount Sink
Double compartment self rimming topmount sink with faucet ledge and
drain board. Drain board is located to the right of sink bowl and is sloped
for drainage. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel.
Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.32008 / CSA B45.4-08.
DRAINBOARD
21" (530 mm)
LBDDBL6408P-1/3)
/3 = 3 hole, 1 1/2" diameter, 4" centers, 8" centerset
NOTES
of bowl.
LBDDBR6408P-1
Drain board is located to the right of sink bowls and is sloped for drainage,
LBDDBL6408P-1
Drain board is located to the left of sink bowls and is sloped for drainage,
DRAINBOARD
SINKS
VIEW / DRAWING
60
61
Scullery Sinks
Classic series - 16 gauge, removable drainboard
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS
18/10) stainless steel. Polished to a #4 satin finish. Sink compartment
sloped to drain with radius coved corners on front and back only. Rolled
rim. Stainless steel tubular legs with adjustable feet. Includes waste
fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08
WASTE SIZE
-5 = 1 1/2" (38mm) duplex waste assembly, rubber stopper, and 1 1/2"
(DN38) brass tailpiece with standpipe and guard
WASTE LOCATION
C = center
RR = right rear
2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4"
(102mm) below top of backsplash.
FLOOR TO RIM:
35" (890mm)
Single compartment
OVERALL DIMENSIONS
MODEL
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLE
OPTIONS
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
C
2
51 3/8" (1305 mm)
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
C
2
51 3/8" (1305 mm)
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
RR
2
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
SL2424-1
27 3/16" (691 mm)
27 3/8" (695 mm)
SL2424-5
27 3/16" (691 mm)
27 3/8" (695 mm)
SL2448-1
27 3/16" (691 mm)
SL2448-5
27 3/16" (691 mm)
Scullery Sink
WASTE SIZE
WASTE LOCATION
C = center
RR = right rear
LR = left rear
FLOOR TO RIM:
35" (890mm)
Double Compartment
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
DL2448-1
27 3/16" (691 mm)
51 3/8" (1305 mm)
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
C
2
DL2448-5
27 3/16" (691 mm)
51 3/8" (1305 mm)
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
RR, LR
2
62
SCULLERY
SINKS
Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS
18/10) stainless steel. Polished to a #4 satin finish. Sink compartments
fittings. Certified to ASME A112.19.3-2008 / CSA B45.4-08
Scullery Sinks
Classic series - 16 gauge, removable drainboard
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS
18/10) stainless steel. Polished to a #4 satin finish. Sink compartments
fittings. Certified to ASME A112.19.3-2008 / CSA B45.4-08
WASTE SIZE
WASTE LOCATION
C = center
RR = right rear
LR = left rear
FLOOR TO RIM:
35" (890mm)
Triple Compartment
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
TL2454-1
27 3/16" (691 mm)
57 3/8" (1457 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
TL2454-5
27 3/16" (691 mm)
57 3/8" (1457 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
RR, RR, LR
2
TL2472-1
27 3/16" (691 mm)
75 3/8" (1915 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
TL2472-5
27 3/16" (691 mm)
75 3/8" (1915 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
RR, RR, LR
2
SCULLERY
SINKS
Removable drainboard
Removable drain board FOR CLASSIC SERIES scullery sinks. Made from
16 gauge (1.5mm) type 304 stainless steel. Polished to a satin finish. The
legs have adjustable feet and are interchangeable such that the product
can be installed on either the left or right of the scullery.
Overall height: 36" (914 mm)
CL-DB
Mounting left or right
63
Scullery Sinks
Service Series - 14 gauge, squared corners
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Single compartment "Service Series" scullery sink. Service Series
sculleries are purpose built, free standing utility sinks which can handle
anything you throw at it. Heavy 14 gauge (2.0mm), type 304 (CNS 18/10)
stainless steel. Polished to a #4 satin finish. Compartment is fully welded
square corner construction. Finished with a rolled rim. Stainless steel
tubular legs with adjustable feet for leveling. Waste fitting included.
Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks
for delivery.
This series of scullery sinks are built to order and are non-returnable. WASTE SIZE
WASTE LOCATION
C = center
Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm)
centerset. Punched 4" (102mm) below top of backsplash.
FLOOR TO WORK SURFACE
35" (890 mm)
Single Compartment - without drainboard
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW SSL2418-1
28 1/2" (724 mm)
22 1/4" (565 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SSL2424-1
28 1/2" (724 mm)
28 1/4" (718 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
Single Compartment - drainboard left or right
OVERALL DIMENSIONS
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW SSL2418L-1
NEW SSL2418R-1
28 1/2" (724 mm)
44 1/8" (1121 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
44 1/8" (1121 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SSL2424L-1
28 1/2" (724 mm)
50 1/8" (1273 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SSL2424R-1
28 1/2" (724 mm)
50 1/8" (1273 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SCULLERY
SINKS
A
(FRONT-BACK)
Single Compartment - drainboard left and right
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW SSL2418LR-1
28 1/2" (724 mm)
66" (1676 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SSL2424LR-1
28 1/2" (724 mm)
72" (1829 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
64
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Double compartment "Service Series" scullery sink. These sculleries are
purpose built free standing utility sinks which can handle anything you
throw at it. Heavy 14 gauge (2.0mm), type 304 (CNS 18/10) stainless
steel. Polished to a #4 satin finish. Compartments are fully welded square
corner construction. Finished with a rolled rim. Stainless steel tubular legs
with adjustable feet for leveling. Waste fitting included. Certified to ASME
A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
WASTE LOCATION
C = center
35" (890 mm)
Double Compartment - without drainboard
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
SDL2436-1
28 1/2" (724 mm)
40 1/4" (1022 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SDL2448-1
28 1/2" (724 mm)
52 1/4" (1327 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
Double Compartment - drainboard left or right
SCULLERY
SINKS
OVERALL DIMENSIONS
NEW
NEW
NEW
NEW
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
SDL2436L-1
28 1/2" (724 mm)
62 1/8" (1578 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SDL2436R-1
28 1/2" (724 mm)
62 1/8" (1578 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SDL2448-L
28 1/2" (724 mm)
74 1/8" (1883 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SDL2448-R
28 1/2" (724 mm)
74 1/8" (1883 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
Double Compartment - drainboard left and right
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW SDL2436LR-1
28 1/2" (724 mm)
84" (2133 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
SDL2448LR-1
28 1/2" (724 mm)
96" (2438 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
65
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Triple compartment "Service Series" scullery sink. These sculleries are
purpose built, free standing utility sinks which can handle anything you
throw at it. Heavy 14 gauge (2.0mm), type 304 (CNS 18/10) stainless
steel. Polished to a #4 satin finish. Compartments are fully welded square
corner construction. Finished with a rolled rim. Stainless steel tubular legs
with adjustable feet for leveling. Waste fitting included. Certified to ASME
WASTE LOCATION
C = center
35" (890 mm)
Triple Compartment - without drainboard
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
STL2454-1
28 1/2" (724 mm)
58 1/4" (1480 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
STL2472-1
28 1/2" (724 mm)
76 1/4" (1937 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
Triple Compartment - drainboard left or right
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
STL2454L-1
28 1/2" (724 mm)
80 1/8" (2035 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
STL2454R-1
28 1/2" (724 mm)
80 1/8" (2035 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
STL2472L-1
28 1/2" (724 mm)
98 1/8" (2492 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
STL2472R-1
28 1/2" (724 mm)
98 1/8" (2492 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SCULLERY
SINKS
NEW
NEW
NEW
NEW
Triple Compartment - drainboard left and right
OVERALL DIMENSIONS
NEW STL2454LR-1
NEW STL2472LR-1
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
28 1/2" (724 mm)
102" (2590 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
120" (3048 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
66
Scullery Sinks
Restaurant Series - 16 gauge, radius coved corners
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Single compartment "Restaurant Series" scullery sink. These sculleries are
free standing scullery sinks constructed with hygiene and food safety in
mind. All radius coved bowl corners are easy to clean and there are no
cracks or seams for bacteria to grow. 16 gauge (1.8mm), type 304 (CNS
18/10) stainless steel. Polished to a #4 satin finish. Finished with a rolled
rim. Stainless steel tubular legs with adjustable feet for leveling. Waste
fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable. WASTE SIZE
WASTE LOCATION
C = center
35" (890 mm)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RSL2418-1
28 1/2" (724 mm)
22 1/4" (565 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RSL2424-1
28 1/2" (724 mm)
28 1/4" (718 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SCULLERY
SINKS
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RSL2418L-1
28 1/2" (724 mm)
44 1/8" (1121 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RSL2418R-1
28 1/2" (724 mm)
44 1/8" (1121 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
50 1/8" (1273 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
50 1/8" (1273 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW RSL2424L-1
NEW RSL2424R-1
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RSL2418LR-1
28 1/2" (724 mm)
66" (1676 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RSL2424LR-1
28 1/2" (724 mm)
72" (1829 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
67
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Double compartment "Restaurant Series" scullery sink. These sculleries
are free standing scullery sinks constructed with hygiene and food safety
in mind. All radius coved bowl corners are easy to clean and there are no
Please allow 4 weeks for delivery.
WASTE LOCATION
C = center
35" (890 mm)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RDL2436-1
28 1/2" (724 mm)
42 1/4" (1073 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RDL2448-1
28 1/2" (724 mm)
54 1/4" (1378 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
OVERALL DIMENSIONS
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RDL2436L-1
28 1/2" (724 mm)
61 1/8" (1629 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RDL2436R-1
28 1/2" (724 mm)
61 1/8" (1629 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
76 1/8" (1934 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
76 1/8" (1934 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW RDL2448L-1
NEW RDL2448R-1
SCULLERY
SINKS
A
(FRONT-BACK)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RDL2436LR-1
28 1/2" (724 mm)
86" (2184 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RDL2448LR-1
28 1/2" (724 mm)
98" (2489 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
68
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Triple compartment "Restaurant Series" scullery sink. These sculleries are
free standing scullery sinks constructed with hygiene and food safety in
mind. All radius coved bowl corners are easy to clean and there are no
WASTE LOCATION
C = center
35" (890 mm)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RTL2454-1
28 1/2" (724 mm)
62 1/4" (1581 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RTL2472-1
28 1/2" (724 mm)
80 1/4" (2038 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SCULLERY
SINKS
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RTL2454L-1
28 1/2" (724 mm)
84 1/8" (2137 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RTL2454R-1
28 1/2" (724 mm)
84 1/8" (2137 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
102 1/8" (2594 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
102 1/8" (2594 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW RTL2472L-1
NEW RTL2472R-1
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
RTL2454LR-1
28 1/2" (724 mm)
106" (2692 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
RTL2472LR-1
28 1/2" (724 mm)
124" (3150 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
69
Scullery Sinks
World Class Series - 14 gauge, radius coved corners
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Single compartment "World Class Series" scullery sink. These sculleries
are free standing scullery sinks fabricated from heavy 14 gauge (2.0mm)
type 304 (CNS 18/10) stainless steel. and designed for hygiene and food
safety. Polished to a #4 satin finish. Finished with a rolled rim. Stainless
steel tubular legs with adjustable feet for leveling. Waste fitting included.
for delivery.
WASTE LOCATION
C = center
35" (890 mm)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW WSL2418-1
28 1/2" (724 mm)
22 1/4" (565 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
WSL2424-1
28 1/2" (724 mm)
28 1/4" (718 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
28 1/2" (724 mm)
44 1/8" (1021 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
44 1/8" (1021 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
WSL2424L-1
28 1/2" (724 mm)
50 1/8" (1273 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
WSL2424R-1
28 1/2" (724 mm)
50 1/8" (1273 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW WSL2418L-1
NEW WSL2418R-1
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW WSL2418LR-1
28 1/2" (724 mm)
66" (1676 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
WSL2424LR-1
28 1/2" (724 mm)
72" (1829 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
70
SCULLERY
SINKS
OVERALL DIMENSIONS
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Double compartment "World Class Series" scullery sink. These sculleries
safety. Polished to a #4 satin finish. Finished with a rolled rim. Bowls have
an extra piece of stainless steel welded as an apron in front to hide the
gap inbetween bowls for ease of cleaning and a more refined look.
Stainless steel tubular legs with adjustable feet for leveling. Waste fitting
included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow
4 weeks for delivery.
WASTE LOCATION
C = center
35" (890 mm)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW WDL2436-1
28 1/2" (724 mm)
42 1/4" (1073 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (929 mm)
C
2
WDL2448-1
28 1/2" (724 mm)
54 1/4" (1378 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SCULLERY
SINKS
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
28 1/2" (724 mm)
61 1/8" (1629 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (929 mm)
C
2
28 1/2" (724 mm)
61 1/8" (1629 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (929 mm)
C
2
WDL2448L-1
28 1/2" (724 mm)
76 1/8" (1934 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
WDL2448R-1
28 1/2" (724 mm)
76 1/8" (1934 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW WDL2436L-1
NEW WDL2436R-1
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
NEW WDL2436LR-1
28 1/2" (724 mm)
86" (2184 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (929 mm)
C
2
WDL2448LR-1
28 1/2" (724 mm)
98" (2489 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
71
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Triple compartment "World Class Series" scullery sink. These sculleries
safety. Polished to a #4 satin finish. Finished with a rolled rim. Bowls have
an extra piece of stainless steel welded as an apron in front to hide the
gap in between bowls for ease of cleaning and a more refined look.
Stainless steel tubular legs with adjustable feet for leveling. Waste fitting
included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow
WASTE LOCATION
C = center
35" (890 mm)
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
WTL2454-1
28 1/2" (724 mm)
62 1/4" (1581 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
WTL2472-1
28 1/2" (724 mm)
80 1/4" (2038 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
28 1/2" (724 mm)
84 1/8" (2137 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
28 1/2" (724 mm)
84 1/8" (2137 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
WTL2472L-1
28 1/2" (724 mm)
102 1/8" (2594 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
WTL2472R-1
28 1/2" (724 mm)
102 1/8" (2594 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW WTL2454L-1
NEW WTL2454R-1
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
WTL2454LR-1
28 1/2" (724 mm)
106" (2692 mm)
24" (610 mm)
18" (457 mm)
14" (356 mm)
9" (229 mm)
C
2
WTL2472LR-1
28 1/2" (724 mm)
124" (3150 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
NEW
72
SCULLERY
SINKS
OVERALL DIMENSIONS
73
Hospital & Laboratory
Premium surgeon scrub stations - 16 gauge
TYPE / MODEL
Surgeon Scrub Sink
Single compartment premium surgical scrub station. 16 gauge (1.5mm),
type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Access panel for service and maintenance. Integral 1
1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard
hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash
crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow
Design Features:
- Surgical scrub stations designed with sloped edges to minimize
free-standing water
- Special integral waste design to prevent use of a waste plug, with 1 1/2"
threaded tailpiece for use with offset waste.
- SANIGUARD® product protection is effective against most common
bacteria, yeasts, molds and fungi that cause stains, odors and product
deterioration. SANIGUARD® product protection is designed to protect the
product itself and will not protect the user or others from food-borne
illness or disease. Always follow proper hygienic and cleaning procedures
when using this product.
OVERALL SIZE (front to back x left to right x height)
16" x 19 3/4" x 28" (406 x 502 x 711 mm)
BOWL SIZE (front to back x left to right x height)
13" x 13 1/2" x 10" (330 x 343 x 254 mm)
BACKSPLASH
5 1/8" (130 mm)
SSU1-2016-00
16" (406 mm) overall width with 13" (330 mm) wide sink compartment
Surgeon Scrub Sink
Single compartment premium surgical scrub station. 16 gauge (1.5mm),
1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard
hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash
Design Features:
free-standing water
- Special integral waste design to prevent use of a waste plug, with 1 1/2"
threaded tailpiece for use with offset waste.
- SANIGUARD® product protection is effective against most common
bacteria, yeasts, molds and fungi that cause stains, odors and product
deterioration. SANIGUARD® product protection is designed to protect the
product itself and will not protect the user or others from food-borne
illness or disease. Always follow proper hygienic and cleaning procedures
when using this product.
20" x 19 3/4" x 28" (508 x 502 x 711 mm)
BOWL SIZE (front to back x left to right x height)
17" x 13 1/2" x 10" (432 x 343 x 254 mm)
BACKSPLASH
5 1/8" (130 mm)
SSU1-2020-00
20" (508 mm) overall width with 17" (431 mm) wide sink compartment
74
HOSPITAL & LAB
SINKS
VIEW / DRAWING
Premium surgeon scrub stations - 16 gauge
VIEW / DRAWING
TYPE / MODEL
Surgeon Scrub Sink
Double compartment premium surgical scrub station. 16 gauge (1.5mm),
1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets.
Surface treated with SANIGUARD® product protection. Standard hole
drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash
Design Features:
free-standing water
- Special integral waste design to prevent use of a waste plug, with 1
1/2"threaded tailpiece for use with offset waste.- SANIGUARD® product
protection is effective against most commonbacteria, yeasts, molds and
fungi that cause stains, odors and product deterioration. SANIGUARD®
product protection is designed to protect the product itself and will not
protect the user or others from food-borne illness or disease. Always
follow proper hygienic and cleaning procedures when using this product.
BACKSPLASH
5 1/8" (130 mm)
HOSPITAL & LAB
SINKS
SSU2-2040-00
75
Surgeon scrub stations - 18 gauge
TYPE / MODEL
Surgeon Scrub Sink
Single compartment surgical scrub station. 18 gauge (1.2mm), type 304
(CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl
corners. Franke hygenic waste with integral talipiece. (No separate waste
fitting required) Access panel for service and maintenance. Supplied with
wall hanger brackets. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
For models with faucets: Faucets certified to CSA B125 and ANSI/ASME
A112.18.1, but are not listed with IAPMO (UPC) or NSF.
BACKSPLASH
4" (100 mm)
SSU1-00
Faucet not included. Please specify hole drilling requirement when
ordering.
SSU1-10
H6000 AC powered hands-free faucet - 1 ea. TMV570 thermostatic mixing
valve - 1 ea.
SSU1-11
H6000 AC powered hands-free faucet- 1 ea. TMV570 thermostatic mixing
valve - 1 ea. C621T AC powered hands-free soap dispenser - 1 ea.
SSU1-20
HB6000 battery operated hands-free faucet - 1 ea. TMV570 thermostatic
mixing valve - 1 ea.
HOSPITAL & LAB
SINKS
VIEW / DRAWING
76
VIEW / DRAWING
TYPE / MODEL
Surgeon Scrub Sink
Double compartment surgical scrub station. 18 gauge (1.2mm), type 304
corners. Franke hygenic waste with integral talipiece. (No separate waste
fitting required) Access panel for service and maintenance. Removable
divider. Please specify hole drilling requirement when ordering. Certified
to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
4" (100 mm)
SSU2-00
ordering.
SSU2-10
valve - 2 ea.
SSU2-11
HOSPITAL & LAB
SINKS
SSU2-20
77
TYPE / MODEL
Surgeon Scrub Sink
Triple compartment surgical scrub station. 18 gauge (1.2mm), type 304
corners. Access panel for service and maintenance. Removable dividers.
1 1/2" (38mm) grid strainer. Please specify hole drilling requirement when
ordering. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow
BACKSPLASH
4" (100 mm)
SSU3-00
ordering.
SSU3-10
valve - 3 ea.
SSU3-11
SSU3-20
HOSPITAL & LAB
SINKS
VIEW / DRAWING
78
Included accessories
VIEW / DRAWING
TYPE / MODEL
Faucet
Hands-free gooseneck faucet with laminar flow. Wall mountable waterproof control box. Preset/adjustable sensor range 3" to 15". Water flows
when sensor is activated. Water flow stops at the selected run-on time
after user removes hands from sensing zone. Run-on time selections are 0
to 8 seconds or 1 to 8 minutes for scrub-up applications. Factory set to 0
seconds. Blocking time between uses has selectable range of 1 to 8
seconds. Factory set to 1 second. Adjustable response time. Auto shut-off
feature. Optional metered program mode with selection of 7 to 240
seconds of continuous operation. Adjustable sensing distance 76 to
381mm (3" to 15") factory set to 254mm (10") (± 1.0").CSA certified.
Complies to ASME A112.18.1/CSA B125.1. ADA compliance to ICC / ANSI
A117.1/ADA. Verified compliant with 0.25% weighted average Pb content
regulations.
Overall height: 12 1/2" (317 mm)
3000T3370A
AC powered (included with SSU-10 and SSU-11 models)
3001T3370A
Battery operated hands-free faucet included with SSU-20 models.
Mixing Valve
Delta thermostatic mixing valve included with SSU_-10, SSU_-11
and SSU_-20 models.
Listed to ASSE 1069, ASSE 1070 and CSA B125.3.
BENEFITS
•Protects against scalding and chilling
•Offers choice of temperature settings from 95° through 115°F
•Easy installation
•Backed by Lawler's One Year Warranty
•ASSE 1017 & 1070 approved
R2570-MIXLF
Soap Dispenser
HOSPITAL & LAB
SINKS
Wall mounted electronic soap dispenser. Type 304 (CNS 18/10) stainless
steel. When user puts hand under nozzle a dose of soap will drop. Adjustable (1 to 3 sec) quantity of soap delivered through a self priming
pump. Electrontic circuit, container and pump contained in 20 gauge
(0.9mm) stainless steel box to be fixed to the wall. Outer casing is 16
gauge (1.5mm) thick to be fixed with vandal resistant stainless steel
screws. Infrared electronic circuit indowed with built-in automatic
anti-dripping device. Capacity of soap container is 1 litre. Pump of soap
dispenser made of anti-acid material allowing use of soap or disinfectant
of any density. As a part of regular maintenance and to prevent splashing,
keep spout-nozzle (7.5) clean, so that soap does not dry on it. CSA 18VAC plug-in transformer included.
Ships with models SSU-11, SSU2-11 and SSU3-11
Optional: TB-9 hard wire transformer to operate up to 9 units.
79
C621T
Optional Accessory
TYPE / MODEL
Backsplash Accessory
SSU backsplash accessory for SSU1, SSU2 and SSU3 surgeon scrub
sinks. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished
to a #4 satin finish. The SSU-BS provides a means to conceal the mixing
valve and faucet controls inbehind the front access panel. The SSU-BS
also protects the back wall from splashing and provides a means to mount
a splash mounted faucet, soap and paper towel dispenser. For SSU2 and
SSU3, order and install 2 or 3pcs respectively.
SSU-BS
NEW
HOSPITAL & LAB
SINKS
VIEW / DRAWING
80
Hand hygiene sinks
VIEW / DRAWING
TYPE / MODEL
Wall Hung Basin
Clinical hand wash basin. Left waste location with open access to allow
for easy cleaning of P-Trap. Integral 1 1/2" (38mm) waste welded to
bottom of the sink bowl. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Certified
to ASME A112.19.3-2008 / CSA B45.4-08.
Separate sink carrier is not required.
This fixture is coated with SANIGUARD® product protection.SANIGUARD® product protection is applied to all exposed surfaces of the sink.
This treatment utilizes a silver ion technology to inhibit the growth of
bacteria, molds and mildews. Silver ions are only released in the presence
of bacteria-laden moisture and disrupt the metabolic and reproductive
cycles of the micro-organisms.
Bowl depth: 9 1/16" (230 mm)
BACKSPLASH
6" (152 mm)
Specify when ordering
HOSPITAL & LAB
SINKS
AWHB1414P-00
81
Hand hygiene sinks
TYPE / MODEL
Hand Hygiene Sink
Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2mm)
type 304 stainless steel. Left rear waste location to prevent water from
splashing directly into the waste from both the faucet and during hand
washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the
basin. Waste is left open and shaped to prevent the assembly of plugs,
strainers and anti-splash fittings which are not allowed by the Z8000
guidelines. High back and side walls contain splashing and protect
adjacent surfaces from contamination. Recommended for laminar flow, user temperature controlled deck
mounted faucet.
Due to the strength and lightness of stainless steel, an in wall carrier is not
required and the sink can be carried and installed by one person. A wall
hanger bracket is used to mount the sink to the wall.
This fixture is coated with SANIGUARD® product protection. SANIGUARD® product protection is applied to all exposed surfaces of the sink.
Patent Pending / Industrial Design Registration Pending
BACKSPLASH
8" (200 mm)
HWS1414P-00
HOSPITAL & LAB
SINKS
VIEW / DRAWING
82
Hand hygiene sinks
VIEW / DRAWING
TYPE / MODEL
Hand Hygiene Sink
adjacent surfaces from contamination. This hand hygiene sink is wider to
permit forearm washing for light procedures as well as for mounting of
paper towel and soap dispensers within the splash guard. Due to the large
size of the backsplash, an additional rear wall splash guard is not required
to comply with the Z8000 guidelines. Recommended for laminar flow, user temperature controlled deck
mounted faucet.
BACKSPLASH
26 1/2" (670 mm)
HOSPITAL & LAB
SINKS
HWS1420P-00
83
Hand hygiene sinks
TYPE / MODEL
Hand Hygiene Sink
adjacent surfaces from contamination.
Recommended for laminar flow, user temperature controlled, splash
mounted faucet.
HWS1518P-00
HWS1518P-00 - no hole
HWS1518P-00/1 - 1 hole ∅1 1/8" (29mm) 9" (228mm) from top of basin,
with anti rotation pin hole ∅0.25" (6.3mm) below.
HWS1518P-00/1W - Same as above with white Saniguard coating.
HOSPITAL & LAB
SINKS
VIEW / DRAWING
84
Hand hygiene sinks
VIEW / DRAWING
TYPE / MODEL
Hand Hygiene Sink
Z8000 Compliant Antimicrobial Hand Hygiene Sink with integral shroud.
18 gauge (1.2mm) type 304 stainless steel. Right rear waste location to
prevent water from splashing directly into the waste from both the faucet
and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to
the bottom of the basin. Waste is left open and shaped to prevent the
assembly of plugs, strainers and anti-splash fittings which are not allowed
by the Z8000 guidelines. High back and side walls contain splashing and
protect adjacent surfaces from contamination.
Recommended for laminar flow, user temperature controlled, splash
mounted faucet.
HWSS1518P-00
HOSPITAL & LAB
SINKS
HWSS1518P-00 - no hole
HWSS1518P-00/1 - 1 hole, ∅1 1/8" (29mm) 9" (228mm) from top of basin,
with anti rotation pin hole, ∅0.25" (6.3mm) below.
HWSS1518P-00/1W - Same as above with white Saniguard coating.
85
Hand hygiene sinks
TYPE / MODEL
Hand Hygiene Sink
Single compartment self rimming topmount (or undermount) medical hand
wash sink. 18 gauge (1.2mm), type 304 stainless steel. Sink compartment
is angled to reduce splashing and waste is offset to reduce the risk of any
bacteria contamination and splashing. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste
fitting, sound deadening pads, factory applied rim seal, cutout template,
A112.19.3-2008 / CSA B45.4-08.Left rear waste location, includes 1 1/2"
(38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38)
brass tailpiece.
FAUCET HOLE OPTIONS
HWS0610P-3
NEW
HWS0610P-3/3, 3 hole 1 1/2" diameter, 4" centers, 8" centerset
HWS0610P-3, Custom (non-returnable)
HOSPITAL & LAB
SINKS
VIEW / DRAWING
86
Hand hygiene sinks
VIEW / DRAWING
TYPE / MODEL
Hand Hygiene Sink
Single compartment self rimming topmount (or undermount) medical hand
wash sink. 18 gauge (1.2mm), type 304 stainless steel. Sink compartment
is angled to reduce splashing and waste is offset to reduce the risk of any
bacteria contamination and splashing. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste
fitting, sound deadening pads, factory applied rim seal, cutout template,
A112.19.3-2008 / CSA B45.4-08.Left rear waste location, includes 1 1/2"
(38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38)
brass tailpiece.
Overall left to right: 20 (508 mm)
FAUCET HOLE OPTIONS
HWS6810P-3
NEW
HOSPITAL & LAB
SINKS
HWS0610P-3/3, 3 hole 1 1/2" diameter, 4" centers, 8" centerset
HWS6810P-3, Custom (non-returnable)
87
We continuously strive to build
infection control into our
health care products!
88
89
Wash Basins
Institutional
TYPE / MODEL
Wall Hung Basin
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304
(CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm)
duplex waste assembly with rubber stopper. Certified to ASME A112.19.32008 / CSA B45.4-08.
BACKSPLASH
9" (229 mm)
WASTE SIZE
1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2"
(DN38) brass tailpiece
WHB1616-3
HAND
WASH BASINS
VIEW / DRAWING
90
Wash Basins
Institutional
VIEW / DRAWING
TYPE / MODEL
Wall Hung Basin
(CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. One piece wall hanger. Waste assembly
included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
3 3/4" (100 mm)
WASTE SIZE / OVERFLOW OPTIONS
-3 = 1 1/2" (38 mm) duplex waste assembly with rubber stopper and
1 1/2" (DN38) brass tailpiece (no overflow)
-6 = 1 1/2" (38 mm) duplex waste assembly with rubber stopper and
1 1/2" (DN38) brass tailpiece (with overflow)
-7 = 1 1/4" (32 mm) waste assembly (not included), no overflow
WHB1617-3
WHB1617-6
(DN40) brass tailpiece , with overflow
HAND
WASH BASINS
WHB1617-7
accepts 1 1/4" (32mm) waste assembly (not included)
91
Wash Basins
Institutional
TYPE / MODEL
Wall hung basin
Wall hung basin with shroud. Center back waste location. 18 gauge
satin finished. Radius coved bowl corners. One piece wall hanger. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 8-10 weeks
for delivery.
BACKSPLASH
3 3/4" (95 mm)
WASTE SIZE
-3 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1
-7 = 1 1/4" (32 mm) waste assembly (not included)
WHBS161709-3
WHBS161709-7
accepts 1 1/4" (32mm) waste (not included)
HAND
WASH BASINS
VIEW / DRAWING
92
Wash Basins
Institutional
VIEW / DRAWING
TYPE / MODEL
Wall Hung Basin
(CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. 16 gauge (1.5mm) side wall brackets. One piece
wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008
/ CSA B45.4-08.
BACKSPLASH
3 3/4" (100 mm)
-3 = 1 1/2" (38 mm) duplex waste assembly with rubber stopper (no
overflow)
-6 = 1 1/2" (38 mm) duplex waste assembly with rubber stopper (with
overflow)
-7 = 1 1/4" (32 mm) waste assembly (not included), no overflow
WHB1819-3
WHB1819-6
1 1/2" (38mm) duplex waste assembly with rubber stopper and 1
1/2"(DN40) brass tailpiece, with overflow
HAND
WASH BASINS
WHB1819-7
accepts 1 1/4" (32mm) waste assembly (not included)
93
Wash Basins
Institutional
TYPE / MODEL
Wall Hung Basin
Wall hung basin with shroud. Center waste location. 18 gauge (1.2mm),
type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin
finished. Radius coved bowl corners. One piece wall hanger. Includes 1
1/2" (38mm) duplex waste assembly with rubber stopper. Certified to
ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
4" (102 mm)
/3-4 = 3 hole, 1 1/2" diameter, 4" center to center, 8" centerset
WHBS181910-3
Pedestal/Wall Hung Basin
Pedestal/Wall Hung Basin with faucet ledge made from 18 gauge (1.2mm)
type 304 stainless steel. Polished satin finish. Radius coved bowl corners.
Includes wall hanger bracket and 1 1/2" (38mm) duplex waste assembly,
location centre. Please allow 4 weeks for delivery.
FWHB1819-3
HAND
WASH BASINS
VIEW / DRAWING
94
Wash Basins
Institutional
VIEW / DRAWING
TYPE / MODEL
Service Sink
Wall service sink. Center waste location. 14 gauge (2.0mm), type 304
(CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. Certified to ASME A112.19.3-2008 / CSA
B45.4-08. Please allow 4 weeks for delivery.
BACKSPLASH
12" (300 mm)
HAND
WASH BASINS
WSS6713
no faucet hole / custom drilling
95
Wash Basins
Designer / semi-public
TYPE / MODEL
Wall hung corner basin
Single compartment corner wall mount wash basin with faucet ledge.
Center waste location. 19 gauge (1.0mm) 18/10 stainless steel. Exposed
surfaces are brushed finish. Includes installation kit. Accepts 1 1/4"
(32mm) waste (not included).
WT310E-7
Wash basin
Single wash basin for wall mounting, stainless steel, surface satin finished,
material thickness 1 mm (19 gauge), seamless welded bowl with diameter
340x300x140 mm, rectangular shape, 120 mm tap ledge, front panel with
45° corner edges, prewelded mounting brackets, mounting conform EN
31, incl. screws and dowels.
Optional shroud also available (refer to specification page WT-RS)
Bowl depth: 5 9/16" (142 mm)
OVERFLOW OPTIONS
-7 = no overflow
-8 = with overflow
WT400C-7
Custom hole drilling, specifiy when ordering, no overflow, accepts 1 1/4"
(32mm) waste - not included.
WT400C-8
With overflow, accepts 1 1/4" (32mm) waste - not included.
96
HAND
WASH BASINS
VIEW / DRAWING
Wash Basins
VIEW / DRAWING
TYPE / MODEL
Wash basin
45° corner edges, prewelded mounting brackets, mounting conform EN
31, incl. screws and dowels.
Bowl depth: 5 9/16" (141 mm)
OVERFLOW OPTIONS
-7 = no overflow
-8 = with overflow
WT500C-7
custom hole drilling, specify when ordering, no oveflow, accepts 1 1/4"
WT500C-8
With overflow, accepts 1 1/4" (32mm) waste - not included
Wash basin
45° corner edges, prewelded mounting brackets, distance between the
centre lines of the fixing holes conform to EN 31, incl. screws and dowels.
HAND
WASH BASINS
OVERFLOW OPTIONS
-7 = no overflow
-8 = with overflow
WT600C-7
Custom hole drilling, specify when ordering, no overflow, accepts 1 1/4"
WT600C-8
With overflow,accepts 1 1/4" (32mm) waste - not included.
97
Wash Basins
TYPE / MODEL
Shroud
Trap cover manufactured from 18 gauge, type 304 stainless steel.
Exposed surfaces are satin finished. For wall mount installation of wash
basin models WT400C, WT500C, WT600C and WHB1617 series.
WT-RS
HAND
WASH BASINS
VIEW / DRAWING
98
Wash Basins
VIEW / DRAWING
TYPE / MODEL
Wall Hung Basin
Wall Hung Basin. Designed for either new installation or for replacement /
retrofit onto select vitreous china wall carriers. Center back waste
location. 18 gauge (1.2 mm) type 304 (CNS18/10) stainless steel. Exposed
surfaces are #4 satin finished. Radius coved bowl corners. Grid strainer
and one piece wall hanger bracket included. The edge is formed as an anti
spill rim. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Available
with optional shroud (WHB2221-RS) to cover the trap and water supplies.
A third piece may be ordered for full under enclosure (WHB2221-UC).
Model complies with ADA (Americans with disabilities act guidelines),
B651-04 (Accessible design for the built environment). Check local codes
to ensure compliance.
BACKSPLASH
4" (102 mm)
-7 = 1 1/4" (32 mm) waste assembly, no overflow
-8 = 1 1/4" (32 mm) waste assembly, with overflow
WHB2221-7
no overflow
WHB2221-8
with overflow
Cover
WHB2221-RS
Removable shroud for WHB2221 series basin.
Made from 18 gauge (1.2mm) stainless steel. Shroud measures 8"(203mm)
wide and extends 12.5"(317mm) below the bottom of the basin. The
shroud is satin finished.
WHB2221-UC
Under cover for WHB2221 series basin.
HAND
WASH BASINS
WHB2221-RS
99
WHB2221-UC
Wash Basins
TYPE / MODEL
Wall Hung Basin
Designer double hand wash basin. 16 gauge 1.8mm thick
T304 (CNS 18/10) stainless steel. Exposed surfaces are
polished to a #4 satin finish. 1 ¼" (DN 32) waste fitting
included with vandal resistant laser cut pyramid waste cover.
Basin is installed using wall brackets, no separate carrier is
required. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Wheelchair accessible - Meets ADA (Americans with
disabilities act guidelines), ANSI A117.1 (Accessible and usable
buildings and facilities), and CSA B651-04 (Accessible design
for the built environment). Check local codes to ensure
compliance.
WHB5222-7
NEW
WHB5222-7/2, 2 faucet holes, 1 1/2" (38mm) diameter.
WHB5222-7, Custom (non-returnable), specify hole drilling.
Optional accessory
WHB5222-RS
Removable stainless steel shroud
HAND
WASH BASINS
VIEW / DRAWING
100
101
Utility Sinks
Mop service sinks
TYPE / MODEL
Mop Sink
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316
(EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved
bowl corners. Integral corner splashguard. Can be installed in either left or
right corners. Undercoated to reduce condensation and resonance. One
piece wall hangers. Includes 2" IPS grid shower waste. Certified to ASME
BACKSPLASH
12" (300 mm)
FSS222210/316-1
Mop Sink
bowl corners. Integral splashguard left and rear sides. Drop front feature
facilitates easy drainage of power driven floor maintenance equipment.
Undercoated to reduce condensation and resonance. One piece wall
hangers.Includes 2" IPS grid shower drain. Certified to ASME A112.19.32008 / CSA B45.4-08. Please allow 4 weeks for delivery.
BACKSPLASH
12" (300 mm)
FSSOL223410/316-1
102
UTILITY
SINKS
VIEW / DRAWING
Utility Sinks
Mop service sinks
VIEW / DRAWING
TYPE / MODEL
Mop Sink
bowl corners. Integral splashguard back and side. Can be installed in
either left or right corners. Undercoated to reduce condensation and
resonance. One piece wall hangers. Includes 2" IPS grid shower drain.
for delivery.
BACKSPLASH
12" (305 mm)
FSS2210/316-1
Mop Sink
bowl corners. Undercoated to reduce condensation and resonance. One
piece wall hangers. Can be installed in either left or right corners. Comes
with integral back splash and side splash. Drop front feature to facilitate
easy drainage of power driven floor maintenance equipment. Includes 2"
IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
12" (305 mm)
UTILITY
SINKS
FSSO2210/316-1
103
Utility Sinks
Mop service sinks
TYPE / MODEL
Mop Sink
bowl corners. Integral splashguard left and rear sides. Undercoated to
reduce condensation and resonance. One piece wall hangers. Includes 2"
IPS grid shower waste. Certified to ASME A112.19.3-2008 / CSA
BACKSPLASH
12" (305 mm)
FSSL223410/316-1
Mop Sink
bowl corners. Integral splashguard right and rear sides. Undercoated to
reduce condensation and resonance. One piece wall hangers. Includes 2"
IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
12" (305 mm)
FSSR223410/316-1
104
UTILITY
SINKS
VIEW / DRAWING
Utility Sinks
Mop service sinks
VIEW / DRAWING
TYPE / MODEL
Mop Sink
bowl corners. Integral splashguard left and rear sides. Drop front feature
facilitates easy drainage of power driven floor maintenance equipment.
Undercoated to reduce condensation and resonance. One piece wall
hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.32008 / CSA B45.4-08. Please allow 4 weeks for delivery.
BACKSPLASH
12" (305 mm)
UTILITY
SINKS
FSSOR223410/316-1
105
Utility Sinks
Sewage Sampling
TYPE / MODEL
Sewage Sampling
Single compartment sewage sampling sink without drainboard. 14 gauge
(2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish.
Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4"(19mm)
O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x
76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA
BACKSPLASH
6 3/4" (171 mm)
35" (890 mm)
SSS1827
106
UTILITY
SINKS
VIEW / DRAWING
Utility Sinks
Sewage sampling
VIEW / DRAWING
TYPE / MODEL
Sewage Sampling Sink
Single compartment sewage sampling sink with left/right drainboard. 14
gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin
finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4"
(19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3"
(76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008
/ CSA B45.4-08. Please allow 4 weeks for delivery.
BACKSPLASH
6 3/4" (170 mm)
35" (890 mm)
SSS1827SDSR
right drain board
UTILITY
SINKS
SSS1827SDSL
left drain board
107
Utility Sinks
Sewage sampling
TYPE / MODEL
Sewage Sampling Sink
Single compartment sewage sampling sink left and right drainboard. 14
gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin
finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4"
(19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3"
(76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008
/ CSA B45.4-08. Please allow 4 weeks for delivery.
BACKSPLASH
6 3/4" (170 mm)
35" (890 mm)
SSS1827DDS
108
UTILITY
SINKS
VIEW / DRAWING
Utility Sinks
Wall trough sinks
VIEW / DRAWING
TYPE / MODEL
Wall Trough Sink - 16 gauge
Single compartment wash trough. Center waste location. 16 gauge
satin finished. Radius coved bowl corners and rolled radius rim. 3 1/2"
(89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Certified to
ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
1 1/2" (38mm) waste option available as custom request.
BACKSPLASH
8" (200 mm)
These models are not returnable once drilled to your specification. Faucet
hole locations should be indicated relative to the sink orientation as shown
in the catalogue drawings. A sketch is recommended.
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
WTS36-1
18" (457 mm)
36" (914 mm)
14 3/4" (375 mm)
33 1/2" (851 mm)
8" (203 mm)
8" (203 mm)
C
N/A
WTS48-1
18" (457 mm)
48" (1219 mm)
14 3/4" (375 mm)
44 1/2" (1130 mm)
8" (203 mm)
8" (203 mm)
C
N/A
WTS60-1
18" (457 mm)
60" (1524 mm)
14 3/4" (375 mm)
56 1/2" (1435 mm)
8" (203 mm)
8" (203 mm)
C
N/A
WTS72-1
18" (457 mm)
72" (1829 mm)
14 3/4" (375 mm)
68 1/2" (1740 mm)
8" (203 mm)
8" (203 mm)
C
N/A
Wall Trough Sink - 14 gauge
Single compartment wash trough. Center waste location. 14 gauge
satin finished. Radius coved bowl corners and rolled radius rim. 3 1/2"
(89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Certified to
ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
These models are not returnable once drilled to your specification. Faucet
hole locations should be indicated relative to the sink orientation as shown
in the catalogue drawings. A sketch is recommended.
OVERALL DIMENSIONS
UTILITY
SINKS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
WASTE
LOCATION
FAUCET
HOLES
WTS2025-1
20" (508 mm)
25" (635 mm)
16 1/2" (419 mm)
22" (559 mm)
10 1/2" (267 mm)
6" (152 mm)
C
N/A
WTS2031-1
20" (508 mm)
31" (787 mm)
16 1/2" (419 mm)
28" (711 mm)
10 1/2" (267 mm)
6" (152 mm)
C
N/A
WTS2036-1
20" (508 mm)
36" (914 mm)
16 1/2" (419 mm)
33" (838 mm)
8" (203 mm)
10" (254 mm)
C
N/A
WTS2048-1
20" (508 mm)
48" (1219 mm)
16 1/2" (419 mm)
45" (1143 mm)
8" (203 mm)
10" (254 mm)
C
N/A
WTS2060-1
20" (508 mm)
60" (1524 mm)
16 1/2" (419 mm)
57" (1448 mm)
8" (203 mm)
10" (254 mm)
C
N/A
WTS2072-1
20" (508 mm)
72" (1829 mm)
16 1/2" (419 mm)
69" (1753 mm)
8" (203 mm)
10" (254 mm)
C
N/A
WTS2096-1
20" (508 mm)
96" (2438 mm)
16 1/2" (419 mm)
93" (2362 mm)
8" (203 mm)
10" (254 mm)
C
N/A
109
Utility Sinks
Sacrarium sink
TYPE / MODEL
Sacrarium Sink
18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4
satin finish. Undercoated to reduce condensation and resonance. Positive
hold down clamping. Hinged top cover. Embossed cross. 1 1/2" (38mm)
duplex waste assembly included. Center waste location. Certified to ASME
A112.19.3-2008 / CSA B45.4-08.
RS14
Sacrarium Sink
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge
satin finished. Undercoated to reduce condensation and resonance.
Hinged top cover. Embossed cross. Includes waste fitting, factory applied
rim seal, cutout template, and factory installed EZ TORQUE™ fasteners.
Certified to ASME A112.19.3-2008 / CSA B45.4-08. Overall front to back: 11 1/4" (286 mm)
SS9126
Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1
1/2” (DN38) brass tailpiece.
110
UTILITY
SINKS
VIEW / DRAWING
111
Topmount faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed
A112.19.3-2008 / CSA B45.4-08. WASTE SIZE (Indicated in model number, eg. S9106/316-1)
-1 = 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb
cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless
steel tailpiece
-3 = 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex
waste assembly with rubber stopper and 1 1/2" (DN38) type 316
(EN1.4401 17/12/2) stainless steel tailpiece
WASTE LOCATION
C = center
CB = center back
LR = left rear
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
●
S9106/316P-1
11 1/4" (286 mm)
13 5/8" (346 mm)
9 1/4" (235 mm)
11 5/8" (295 mm)
6" (152 mm)
C
N/A
●
S9106/316P-3
11 1/4" (286 mm)
13 5/8" (346 mm)
9 1/4" (235 mm)
11 5/8" (295 mm)
6" (152 mm)
C
N/A
S9407/316P-1
11 5/8" (295 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
N/A
S9407/316P-3
11 5/8" (295 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
N/A
S6407/316P-3
18 1/8" (460 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (355 mm)
7" (178 mm)
CB
N/A
S6407/316P-1
18 1/8" (460 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
7" (178 mm)
C
N/A
S6808/316P-1
18 1/8" (460 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
N/A
S6810/316P-3
18 1/8" (460 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
LR
N/A
S6810/316P-1
18 1/8" (460 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
C
N/A
112
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Topmount without faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
resonance. Center back waste location. Includes 3 1/2" (89mm) type 316
(EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38)
type 316 (EN1.4401 17/12/2) stainless steel tailpiece, factory applied rim
S6410/316PCB-1
center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2)
stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401
17/12/2) stainless steel tailpiece.
113
Topmount with faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
A112.19.3-2008 / CSA B45.4-08. WASTE SIZE (Indicated in model number, eg. LBS4607/316-1)
steel tailpiece
WASTE LOCATION
C = center
CB = center back
LR = left rear
LBS4607/316-1/1)
CUSTOM FAUCET HOLES
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET HOLE
OPTIONS
LBS9407/316P-1
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
1, 3
LBS9407/316P-3
14 5/16" (364 mm)
16 5/8" (422 mm)
9 1/2" (241 mm)
14 1/2" (368 mm)
7" (178 mm)
C
1, 3
LBS4607/316P-1
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
7" (178 mm)
C
1, 3
LBS4607/316P-3
18 13/16" (478 mm)
18 1/8" (460 mm)
14" (356 mm)
16" (406 mm)
7" (178 mm)
C
1, 3
LBS6807/316P-1
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
7" (178 mm)
CB
1, 3
LBS6808/316P-1
20 1/2" (521 mm)
20" (508 mm)
16" (406 mm)
18" (457 mm)
8" (203 mm)
CB
1, 3
ALBS6805/316P-1
20 9/16" (522 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
5" (127 mm)
LR
1, 3
LBS6407/316P-1
20 9/16" (522 mm)
16 1/8" (410 mm)
16" (406 mm)
14" (356 mm)
7" (178 mm)
CB
1, 3
LBS6810/316P-1
20 9/16" (522 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
C
1, 3
LBS6810/316P-3
20 9/16" (522 mm)
20 1/8" (511 mm)
16" (406 mm)
18" (457 mm)
10" (254 mm)
LR
1, 3
MODEL
●
114
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Topmount with faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
A112.19.3-2008 / CSA B45.4-08. Overall front to back: 18 13/16" (478 mm)
WASTE SIZE (Indicated in model number, eg. LBS4610/316PC-3)
steel tailpiece
WASTE LOCATION
C = center
LBS4610/316-1/1)
CUSTOM FAUCET HOLES
LBS4610/316P-1
center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2)
LBS4610/316PC-3
center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2)
stainless steel duplex waste assembly with rubber stopper and 1 1/2"
(DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece
115
Undermount single compartment
VIEW / DRAWING
TYPE / MODEL
Undermount Sink
Single compartment undermount sink. 18 gauge (1.2mm), type 316
(EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin
finished. Undercoated to reduce condensation and resonance. Includes
waste fitting, cutout template, and installation hardware. Certified to
ASME A112.19.3-2008 / CSA B45.4-08.
Center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2)
UCS6808/316P-1
Undermount Sink
waste fitting, cutout template, and Universal Installation System hardware.
Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2)
UCS6810/316P-1
116
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Undermount single compartment
VIEW / DRAWING
TYPE / MODEL
Undermount Sink
ASME A112.19.3-2008 / CSA B45.4-08.
UCS4608/316P-1
Undermount Sink
ASME A112.19.3-2008 / CSA B45.4-08.
UCS4610/316P-1
117
Topmount sink without faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Double compartment self rimming topmount sink less faucet ledge. 18
gauge (1.2mm), type 316 (CNS 17/12/2) stainless steel. Exposed surfaces
A112.19.3-2008 / CSA B45.4-08.
WASTE OPTIONS
•D6410/316P-1 = 3 1/2" (89 mm) crumb cup waste assembly, location
center.
•D6410/316P-3 = 1 1/2" (38 mm) duplex waste assembly with rubber
stopper, location left rear.
D6410/316PCB-1
center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2)
118
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Double topmount sink with faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
Double compartment self rimming topmount sink with faucet ledge.
Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401
17/12/2) stainless steel. Exposed surfaces are #4 satin finished.
Undercoated to reduce condensation and resonance. Includes factory
applied rim seal, factory installed EZ TORQUE™ fasteners and 3 1/2"
(89mm) crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401
17/12/2) stainless steel tailpiece. Certified to ASME A112.19.3-2008 /
LBD6407/316P-1
7" (178mm) deep, centre back waste location, 3 1/2" (89mm) type 316
crumb cup waste
LBD6408/316P-1
8" (203mm) deep, centre back waste location, 3 1/2" (89mm) type 316
crumb cup waste
Topmount Sink
Double compartment self rimming topmount sink with faucet ledge.
Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401
18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim
seal, factory installed EZ TORQUE™ fasteners, and waste kit. Certified to
ASME A112.19.3-2008 / CSA B45.4-08. Overall front to back: 20 13/16" (529 mm)
LBD6410/316PCB-1
center back waste location, includes 3 1/2" (89mm) type 316 (EN1.4401
17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316
(EN1.4401 17/12/2) stainless steel tailpiece.
119
Art room sinks
VIEW / DRAWING
TYPE / MODEL
Art Room Sink
Single compartment self rimming topmount sink without faucet ledge. 18
resonance. Includes waste fitting, factory applied rim seal, and factory
CSA B45.4-08. WASTE SIZE (Indicated in model number, eg. ART36/316-1)
steel tailpiece.
-3C = 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex
(EN1.4401 17/12/2) stainless steel tailpiece.
WASTE LOCATION
C = center
OVERALL DIMENSIONS
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
WASTE
LOCATION
FAUCET
HOLES
ART36/316-1
19 1/8" (486 mm)
38 1/8" (969 mm)
17" (432 mm)
36" (914 mm)
8" (203 mm)
C
N/A
ART36/316-3C
19 1/8" (486 mm)
38 1/8" (969 mm)
17" (432 mm)
36" (914 mm)
8" (203 mm)
C
N/A
ART48/316-1
19 1/8" (486 mm)
50 1/8" (1273 mm)
17" (432 mm)
48" (1219 mm)
8" (203 mm)
C
N/A
ART48/316-3C
19 1/8" (486 mm)
50 1/8" (1273 mm)
17" (432 mm)
48" (1219 mm)
8" (203 mm)
C
N/A
ART60/316-1
19 1/8" (486 mm)
62 1/8" (1578 mm)
17" (432 mm)
60" (1524 mm)
8" (203 mm)
C
N/A
ART60/316-3C
19 1/8" (486 mm)
62 1/8" (1578 mm)
17" (432 mm)
60" (1524 mm)
8" (203 mm)
C
N/A
MODEL
120
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Drainboard with faucet ledge
VIEW / DRAWING
TYPE / MODEL
Topmount Sink
drain board. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless
steel. Exposed surfaces are #4 satin finished. Undercoated to reduce
condensation and resonance. Waste fittings included. Certified to ASME
A112.19.3-2008 / CSA B45.4-08. Note: Please allow 4 weeks for delivery.
DRAINBOARD
21" (530 mm)
WASTE SIZE
-1 = 3 1/2" (89 mm) crumb cup waste assembly, location center
-3 = 1 1/2" (38 mm) duplex waste assembly, waste location left rear
LBSDBR6810/316-3/3)
/3 = 3 hole, 1 1/2" diameter, 4" centers,8" centerset
NOTES
of bowl.
LBSDBL6810/316P-1
Single compartment with drainboard left
LBSDBR6810/316P-1
Single compartment with drainboard right
121
Laboratory cup sinks
VIEW / DRAWING
TYPE / MODEL
Cup Sink
Single bowl commercial laboratory sink. 20 gauge (0.9mm), type 316
(EN1.4401 17/12/2) stainless steel. Exposed surfaces are sand-blast
finished. Positive hold down clamping. 1 1/2" (38mm) type 316 (EN1.4401
17/12/2) stainless steel duplex waste assembly is integral (tailpiece
optional*). Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Center waste location
*These sinks do not include tailpiece. A type 316 tailpiece is available by
ordering 315-9/316.
Bowl depth: 3 11/16" (94 mm)
OC6/316
Cup Sink
optional*). Certified to AS ME A112.19.3-2008 / CSA B45.4-08.
*These sinks do not include tailpiece.
A type 316 tailpiece is available by ordering 315-9/316.
RC5/316
122
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Laboratory cup sinks
VIEW / DRAWING
TYPE / MODEL
Cup Sink
optional*). Certified to ASME A112.19.3-2008 / CSA B45.4-08.
These sinks do not include tailpiece. A type 316 tailpiece is available by
ordering 315-9/316.
Overall left to right: 7 5/8" (194mm)
RC6/316
123
Wall hung basins
VIEW / DRAWING
TYPE / MODEL
Wall Hung Basin
(EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4
satin finished. Radius coved bowl corners. One piece wall hanger. Includes
type 316 (EN1.4401 17/12/2) 1 1/2" (38mm) duplex waste assembly
with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
3 3/4" (100 mm)
WHB1617⁄316-3
WHB1617/316-3/1, 1 hole, 1 1/2" diameter
WHB1617/316-3/3, 3 hole, 1 1/2" diameter, 4" centerset
WHB1617/316-3, Custom (non-returnable)
Wall Hung Basin
(EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4
satin finished. Radius coved bowl corners. One piece wall hanger. Includes
type 316 (EN1.4401 17/12/2) 1 1/2" (38mm) duplex waste assembly
with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
3 3/4" (100 mm)
WHB1819/316-3
no faucet hole / custom drilling, 1 1/2" (38mm) duplex waste assembly
with rubber stopper and 1 1/2" (DN38) brass tailpiece
124
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Wall hung basins
VIEW / DRAWING
TYPE / MODEL
Wall hung basin
Wall hung basin with shroud. Center back waste location. 18 gauge
(1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces
are #4 satin finished. Radius coved bowl corners. One piece wall
hanger. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow
8-10 weeks for delivery.
BACKSPLASH
3 3/4" (95 mm)
WASTE SIZE
-7 = 1 1/4" (32 mm) waste assembly (not included)
WHBS161709/316-3
1 1/2" (38mm) waste
Single compartment wall hung basins
WHBS161709/316-7
accepts 1 1/4" (32mm) waste (not included)
125
Wall hung basins
VIEW / DRAWING
TYPE / MODEL
Wall Hung Basin
Wall hung basin with shroud. Center waste location. 18 gauge (1.2mm),
type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are
polished #4 satin finished. Radius coved bowl corners. One piece wall
hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber
stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
BACKSPLASH
4" (102 mm)
WHBS181910/316-3
Single compartment wall hung basins
126
TYPE 316
LAB SINKS
TYPE 316
LAB SINKS
Scullery Sinks
VIEW / DRAWING
TYPE / MODEL
Scullery Sink
Single compartment scullery sink. 16 gauge (1.5mm), type 316 (EN1.4401
17/12/2) stainless steel. Polished to a #4 satin finish. Sink compartment
rim. Stainless Steel tubular legs with adjustable feet. Type 316 (EN1.4401
17/12/2) waste fitting included. Certified to ASME A112.19.3-2008 / CSA
B45.4-08.
This series of scullery sinks are built to order and are non-returnable.
BACKSPLASH
9" (230 mm)
WASTE SIZE
steel tailpiece.
(EN1.4401 17/12/2) stainless steel tailpiece with standpipe and guard
35" (890 mm)
OVERALL DIMENSIONS
MODEL
A
(FRONT-BACK)
B
(LEFT-RIGHT)
C
(FRONT-BACK)
D
(LEFT-RIGHT)
E
(DEPTH)
F
BACKSPLASH
SL2424/316-1
27 3/16" (691 mm)
27 3/16" (691 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
C
2
SL2424/316-5
27 3/16" (691 mm)
27 3/16" (691 mm)
24" (610 mm)
24" (610 mm)
14" (356 mm)
9" (229 mm)
RR
2
SL2448/316-5
27 3/16" (691 mm)
51 3/8" (1305 mm)
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
RR
2
SL2448/316-1
27 3/16" (691 mm)
51 3/8" (1305 mm)
24" (610 mm)
48" (1219 mm)
14" (356 mm)
9" (229 mm)
C
2
127
WASTE
LOCATION
FAUCET
HOLES
We have the perfect sink
for your laboratory,
clinic or hospital
128
129
Urinals and Toilets
Urinals
TYPE / MODEL
Urinal
Single urinal for wall mounting, stainless steel, surface satin finished,
material thickness 1.2 mm, oval bowl, hidden horizontal outlet towards
wall, mounting and fixing conform to EN 80, hidden screws, included trap
DN 50, included mounting bracket and domed waste.
Single urinal for wall mounting, stainless steel, surface satin finished,
material thickness 1.2 mm (18 gauge), oval bowl, hidden horizontal outlet
towards wall, mounting and fixing conform to EN 80, hidden screws,
included trap DN 50, included mounting bracket and domed waste.
CMPX538
with stainless steel spreader 1/2"
CE Certified
130
URINALS &
TOILETS
VIEW / DRAWING
Urinals and Toilets
Toilets
URINALS &
TOILETS
VIEW / DRAWING
TYPE / MODEL
Toilet
The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10)
stainless steel. The elongated bowl is drawn and seamlessly welded and
polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror
finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless
steel. Elongated design blow out jet bowl. The toilet requires a minimum of
35 PSI flow pressure. The toilet was tested and certified as a low water
consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8"
(54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is
1 1/2" (38.1mm) FIPT top spud. A standard elongated toilet seat (supplied
by others) can be used with this product. Fixture can be installed to a
standard 3 bolt wall carrier for blowout jet toilets.
HDWC2514-FM-T
front mounted
Toilet
The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10)
stainless steel. The elongated bowl is drawn and seamlessly welded and
finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless
steel. Elongated design blow out jet bowl. The toilet requires a minimum of
35 PSI flow pressure. The toilet was tested and certified as a low water
consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8"
(54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is
1 1/2" (38.1mm) FIPT rear spud.
These fixtures are designed to be installed onto a 3 bolt blow out jet wall
carrier.
HDWC2414-FM-R
front mounted
131
132
133
Accessories
Shower curtain hooks, curtain rods and shower curtains
VIEW / DRAWING
TYPE / MODEL
Curtain Hook
CH-01
stainless steel wire, with snap ring locking device and rollers with polished
chrome finish.
Overall size left to right: 1 1/2" (38 mm)
CH-01
CH-02
CH-02
stainless steel wire, with snap ring locking device and polished chrome
finish.
Overall size left to right: 1 1/2" (38 mm)
Curtain Rod
Curtain rod, stainless steel tubing, 1 1/4" (32mm) diameter. Exposed
surfaces finished to a #4 satin finish. Polished chrome flanges and
mounting hardware included.
CR-36
36" (914mm) length
CR-48
48" (1220mm) length
CR-60
60" (1525mm) length
CR-72
72" (1830mm) length
Shower Curtain
Deluxe shower curtain. Opaque white vinyl, matte finish with nickel-plated
grommets
CV-00
Overall size left to right: 70" (1780 mm)
CV-01
CV-02
CV-00
134
WASHROOM
ACCESSORIES
Curtain Hook (polished chrome finish) (12 pcs)
Accessories
Apparel hooks
VIEW / DRAWING
TYPE / MODEL
Hook
WASHROOM
ACCESSORIES
Hook for wall mounting, stainless steel, surface satin finished, 17 mm
(.669") pipe diameter, drilled hole on bottom for fixation, incl. stainless
steel screws and dowels.
Overall left to right: 11/16" (18 mm)
STRX692
Hook
Double hook for wall mounting, stainless steel, surface satin finished, 18
mm (.7") pipe diameter, drilled hole on bottom for fixation, incl. stainless
Overall height: 11/16" (18 mm)
STRX694
135
Accessories
Grab bars and corner guard
TYPE / MODEL
Grab Bar
1 1/4" (32mm) diameter. 18 gauge (1.2mm) type 304 (CNS 18/10)
stainless steel tubing. Exposed surfaces finished to a #4 satin with
peened texture finish in grab locations. Concealed snap flanges and
mounting hardware included. Provide adequate backing in wall for support
and comply to local codes for barrier free requirements.
QC-1W-18P
Straight grab bar, 18" (457mm) length
QC-1W-24P
QC-1W-30P
QC-1W-36P
2-Wall Grab Bar
Angled grab bar, with centre support. 18 gauge (1.2mm) type 304 (CNS
18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with
peened texture finish in grab locations. Concealed snap flanges and
QC-2W-2436P
Two wall angled grab bar, 24" x 36" (610mm x 915mm) with centre support
QC-2W-3030P
Two wall angled grab bar, 30" x 30" (760mm x 760mm) with centre
support.
Back Rest
Stainless steel bar uses #4 gloss with flanges and covers, with antique
white solid core plastic laminate panel back. Concealed snap flanges and
CM-16104
Overall size of left to right is measured centre to centre.
136
WASHROOM
ACCESSORIES
VIEW / DRAWING
Accessories
Grab bars and corner guard
VIEW / DRAWING
TYPE / MODEL
Single Wall Angled Grab Bar
WASHROOM
ACCESSORIES
30" x 30" (760mm x 760mm) with centre support. 18 gauge (1.2mm) type
304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4
satin with peened texture finish in grab locations. Concealed snap flanges
and mounting hardware included. Provide adequate backing in wall for
support and comply to local codes for barrier free requirements.
QC-1W-3030P
1 1/4" (32 mm) diameter
Corner Guard
Corner guard made from 18 gauge (1.2mm), type 304 18/10 stainless
steel. Pre-drilled for fasteners (not included), no return bend. Satin
finished.
ACG-48
Corner Guard
137
Accessories
Paper towel dispensers
TYPE / MODEL
XINOX Paper towel dispenser
Paper towel dispenser "Miss Clean" for wall mounting, stainless steel,
surface satin finished with InoxPlus surface refinement for the reduction
of finger marks and better cleaning characteristics (easy to clean),
material thickness 2 mm (14 gauge), casing with revolving shadow gap and
curved profile, key and lock stainless steel, inspection window on front,
loading capacity 300 - 400 pcs. of paper depending on convolution, incl.
stainless steel screws and dowels.
XINX600
RODAN Paper towel dispenser
Paper towel dispenser for wall mounting, stainless steel, surface satin
finished, material thickness 22 gauge, folded front cover, cylinder lock
with Franke standard key, inspection windows on sides, loading capacity
500 - 800 pcs. of paper depending on convolution, incl. stainless steel
screws and dowels.
RODX600
Touch free paper towel dispenser for wall mounting, stainless steel,
surface satin finished, material thickness 22 gauge folded cover with
cylinder lock and standard Franke key, infrared sensor activity for
non-touch operation, integrated tear-off edge, needs 4 pcs. standard D
1.5 V batteries, maintenance free mechanic and easy paper roll change
mechanism, for rolls with max. width 205 mm (8.07") and max. diameter
200 mm (7.87"), paper length adjustable to 200, 250 and 300 mm (7.87,
9.84" and 11.81"), incl. stainless steel screws and dowels.
RODX630
138
WASHROOM
ACCESSORIES
VIEW / DRAWING
Accessories
Paper towel dispensers
VIEW / DRAWING
TYPE / MODEL
WASHROOM
ACCESSORIES
Paper towel dispenser for recessed mounting, stainless steel, surface
satin finished, material thickness 22 gauge, folded front cover, cylinder
lock with Franke standard key, loading capacity 500 - 800 pcs. of paper
depending on convolution, incl. stainless steel screws and dowels.
RODX600E
Paper towel dispenser for hidden mounting behind wall and mirror,
stainless steel, surface satin finished, material thickness 22 gauge for 600
- 800 paper towels, depending on convolution, filling from bottom, incl.
RODX600ME
139
Accessories
Soap dispenser - topmount
TYPE / MODEL
Soap Dispenser
Chrome soap dispenser manufactured from chromium plated brass. Incorporates a replaceable 1 litre polyethylene container for use with liquid
soap
SD80V
standard
SD80V-EXT
with extension for "Murro" basin (or equivalent)
140
WASHROOM
ACCESSORIES
VIEW / DRAWING
Accessories
Soap dispensers - wall mount
VIEW / DRAWING
TYPE / MODEL
XINOX Soap dispenser, foam
WASHROOM
ACCESSORIES
Foam soap dispenser "Mr. F. Proper" for wall mounting, stainless steel,
curved profile, key and lock stainless steel, inspection window on front,
suitable for Franke foam soap, one bottle 650 ml foam soap included in
first delivery, stainless steel pull lever, incl. stainless steel screws and
dowels.
XINX616
XINOX Soap dispenser
Soap dispenser "Mr. C. Proper" for wall mounting, stainless steel, surface
satin finished with InoxPlus surface refinement for the reduction of finger
marks and better cleaning characteristics (easy to clean), material
thickness 2 mm (14 gauge), casing with revolving shadow gap and curved
profile, key and lock stainless steel, inspection window on front, suitable
for liquid soaps and lotions, 1 liter soap tank, stainless steel push lever,
incl. stainless steel screws and dowels.
XINX617
RODAN Soap dispenser
Soap dispenser for wall mounting, stainless steel, surface satin finished,
material thickness 20 gauge folded front cover, cylinder lock with Franke
standard key, suitable for liquid soaps and lotions, 0.8 liter soap tank, lever
to pull, incl. stainless steel screws and dowels.
RODX618
Touch free soap dispenser for wall mounting, stainless steel, surface satin
finished, material thickness 20 gauge folded front cover, cylinder lock with
Franke standard key, infrared sensor activity for non-touch operation,
LED-light shows battery status, needs 6 pcs. 1.5 V (=9 V) Alkaline AA
batteries, suitable for liquid soaps and lotions, 800 ml soap tank,
depending on soap between 0.6 and 1.1 ml is dispensed, incl. stainless
RODX625
141
Accessories
Soap dispenser - wall mount
TYPE / MODEL
XINOX Soap dispenser
Touch free soap dispenser "Mr. E Proper" for wall mounting, stainless
steel, surface satin finished with InoxPlus surface refinement for the
reduction of finger marks and better cleaning characteristics (easy to
clean), material thickness 2 mm (14 gauge), casing with revolving shadow
gap and curved profile, key and lock stainless steel, inspection window on
front, infrared sensor activity for non-touch operation, LED shows battery
status, incl. 6 pcs. 1.5 V Alkaline AA batteries, suitable for liquid soaps
and lotions, 0.8 l soap tank, dispenses depending on soap between 0.6
and 1.1 ml, mounting height >300 mm above wash basin or table top, incl.
XINX625
Soap dispenser for recessed mounting, stainless steel, surface satin
Franke standard key, suitable for liquid soaps and lotions, 0.8 liter soap
tank, lever to pull, incl. stainless steel screws and dowels.
RODX618E
Soap dispenser for wall mounting, stainless steel, surface satin finished,
material thickness 20 gauge folded front cover, cylinder lock with Franke
standard key, suitable for liquid soaps and lotions, 1 liter soap tank, push
button on front, incl. stainless steel screws and dowels.
RODX619
Soap dispenser for recessed mounting, stainless steel, surface satin
Franke standard key, suitable for liquid soaps and lotions, 1 liter soap
tank, push button on front, incl. stainless steel screws and dowels.
RODX619E
142
WASHROOM
ACCESSORIES
VIEW / DRAWING
Accessories
Toilet paper roll dispensers
VIEW / DRAWING
TYPE / MODEL
XINOX Toilet roll holder
WASHROOM
ACCESSORIES
Toilet roll holder "Have One" for wall mounting, stainless steel, surface
profile, for 1 roll with max. Ø 120 mm, folding front, incl. stainless steel
screws and dowels.
XINX677
XINOX Toilet roll holder
Double toilet roll holder "Have Two" for wall mounting, stainless steel,
curved profile, key and lock stainless steel, for 2 rolls with max. Ø 120
mm, second roll will be released after consumption of first roll, incl.
XINX672
RODAN Toilet roll holder with spindle system
Double toilet roll holder with spindle system for wall mounting, stainless
steel, surface satin finished, material thickness 22 gauge folded front
cover, cylinder lock with Franke standard key, for 2 rolls with max. Ø 120
mm (4.72"), second roll will be released after consumption of first roll, with
spindles, reserve roll not visible, incl. stainless steel screws and dowels.
RODX672
RODAN Toilet roll holder with spindle system
Double toilet roll holder with spindle system for recessed mounting,
stainless steel, surface satin finished, material thickness 22 gauge folded
front cover, cylinder lock with Franke standard key, for 2 rolls with max. Ø
120 mm (4.72"), second roll will be released after consumption of first roll,
reserve roll not visible, incl. stainless steel screws and dowels.
RODX672E
143
Accessories
Toilet paper roll dispenser
TYPE / MODEL
Jumbo Toilet Roll holder
Jumbo roll holder for wall mounting, stainless steel, surface satin finished,
material thickness 0.9 mm, closed round casing with inspection window,
paper withdrawal over two tear-off edges, locked with hexagonal allen
screw, for 1 roll with max. Ø 350 mm, incl. stainless steel screws, dowels
and hexagonal allen key.
CHRX670
144
WASHROOM
ACCESSORIES
VIEW / DRAWING
Accessories
Waste bins & Combinations
VIEW / DRAWING
TYPE / MODEL
XINOX Waste bin
WASHROOM
ACCESSORIES
Waste bin "Tiny Tom" - 30 Liter floor standing or for wall mounting,
stainless steel, surface satin finished with InoxPlus surface refinement for
the reduction of finger marks and better cleaning characteristics (easy to
gap and curved profile, key and lock stainless steel, approx. 30 liter
capacity, folding lid, round dropping aperture, integrated bag holder,
height adjustable feets.
XINX606
Optional accessory
E-XINX606
Wall bracket for mounting the bin XINX606 on the wall.
XINOX Waste bin
Waste bin "Uncle Ben" - 60 Liter floor standing for wall mounting, stainless
steel, surface satin finished with InoxPlus surface refinement for the
reduction of finger marks and better cleaning characteristics (easy to
gap and curved profile, key and lock stainless steel, approx. 60 liter
capacity, folding lid, round dropping aperture, integrated bag holder,
height adjustable feets.
XINX608
Optional accessory
E-XINX608
Wall bracket for mounting the bin XINX608 on the wall.
RODAN Sanitary towel and disposal bin
Sanitary towel and disposal bin for wall mounting, stainless steel, surface
satin finished, material thickness 22 gauge folded front cover, approx. 3.7
liter capacity, removable plastic container inside, incl. stainless steel
screws and dowels.
RODX611
145
Accessories
Waste bins & Combinations
TYPE / MODEL
XINOX Waste bin
Waste bin "George S." - 7 Liter for wall mounting, stainless steel, surface
profile, approx. 7 liter capacity, folding selfclosing lid, integrated bag
holder, incl. stainless steel screws and dowels.
XINX605
RODAN Waste bin
Waste bin for wall mounting, stainless steel, surface satin finished,
material thickness 22 gauge rounded edges, mounting either with
mounting bracket or directly onto the wall, incl. stainless steel screws and
dowels.
RODX605
capacity: approx. 23 liter
RODAN Waste bin
Waste bin for recessed mounting, stainless steel, surface satin finished,
material thickness 22 gauge rounded edges, cylinder lock with Franke
standard key, mounting with in-wall frame, incl. stainless steel screws and
dowels.
RODX605E
capacity: approx. 23 liter
146
WASHROOM
ACCESSORIES
VIEW / DRAWING
Accessories
Waste bins & combinations
VIEW / DRAWING
TYPE / MODEL
RODAN Combination paper towel dispenser and waste bin
WASHROOM
ACCESSORIES
Paper towel dispenser, waste bin combination for wall mounting, stainless
steel, surface satin finished, material thickness 22 gauge folded front
cover, cylinder lock with Franke standard key, loading capacity 500 - 800
pcs. of paper depending on convolution, waste bin with approx. 23 liter
capacity, incl. stainless steel screws and dowels.
RODX602
RODAN Combination paper towel dispenser and waste bin
Paper towel dispenser - waste bin combination for recessed mounting,
stainless steel, surface satin finished, material thickness 22 gauge folded
front cover, cylinder lock with Franke standard key, loading capacity 500
- 800 pcs. of paper depending on convolution, waste bin with approx. 23
liter capacity, incl. stainless steel screws and dowels.
RODX602E
147
Accessories
Mirrors
TYPE / MODEL
Channel frame mirrors
One piece, 3/8" (9.53mm) x 1/2" (12.7mm) x 3/8" (9.53mm), type 430 BA
stainless steel channel frame. Tightly mitered corners with unique
concealed screw fixings to ensure easy field mirror replacement.
WASHROOM
ACCESSORIES
VIEW / DRAWING
No.1 quality, 5mm glass mirror, conforms to GSB 12-GD5A Type B. Guaranteed against silver spoilage for 10 years.
Three way keyhole slots and theft resistant clips assure a secure and
vandal resistant mounting. Mirrors can be installed horizontally or
vertically.
Overall front to back: 1/2" (13 mm)
F850-1824
NEW
F850-1830
NEW
Overall height: 30" (762mm)
F850-1836
NEW
F850-2430
NEW
F850-2436
NEW
Overall height: 36" (914mm)
148
Accessories
Mirrors
VIEW / DRAWING
TYPE / MODEL
Welded frame mirrors
WASHROOM
ACCESSORIES
Rigidly formed, 3/4" (19mm) x 5/8" (16mm), 18 gauge (1.2mm), type 304
(CNS 18/10) stainless steel angle frame with #4 satin finish. Mitered
corners are heliarc welded, ground, and polished smooth.
No.1 quality, 5mm glass mirror, conforms to GSB 12-GD5A Type B. Guaranteed against silver spoilage for 10 years.
Wall hanger and mechanical fixings are concealed to assure a secure and
vandal resistant wall mounting. Overall front to back: 5/8" (16 mm)
F3200-1824
NEW
F3200-1830
NEW
F3200-1836
NEW
F3200-2430
NEW
F3200-2436
NEW
149
Accessories
Mirrors
TYPE / MODEL
Fixed position tilt mirrors
Rigidly formed, 3/4" (19mm) x 5/8" (16mm), 18 gauge (1.2mm), type 304
(CNS 18/10) stainless steel angle frame with #4 satin finish. Mitered
corners are heliarc welded, ground, and polished smooth.
No.1 quality, 5mm glass mirror, conforms to GSB 12-GD5A Type B.
Guaranteed against silver spoilage for 10 years.
Wall hanger and mechanical fixings are conceiled to assure a secure and
vandal resistant wall mounting. Overall front to back: 4" (102 mm)
F3200FT-1630
NEW
F3200FT-1830
NEW
F3200FT-1836
NEW
F3200FT-2436
NEW
150
WASHROOM
ACCESSORIES
VIEW / DRAWING
151
Securityware
Combi units, toilets & urinals
TYPE / MODEL
Combination Unit
This Heavy Duty Combination Toilet/Lavatory is designed for areas
requiring the utmost in vandal resistance. The fixture is fabricated from
heavy 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel and is
designed to withstand loads of 5000lbs (2267kg) without permanent
damage. The cabinet and drawn bowls are seamlessly welded and are
finish. Internal piping is also 14 gauge (2.0mm) type 304 (CNS 18/10)
stainless steel. Elongated design blow out jet bowl. The toilet requires a
minimum of 35 PSI (3.41 BAR) flow pressure. The toilet was tested and
certified as a low water consumption toilet using 1.6gpf (6 litres). The trap
will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. The
waste outlet extends a minimum of 3" (76.2mm) behind the fixture and has
a plain end OD of 2 3/8" (60.3mm). Certified to ASME A112.19.2-2008/
CSA B45.1-08 standards.
INSTALLATION:
These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Standard included hardware is for walls up
to 8" (203.2mm) thick. For existing walls, an optional metal cutout
template is available. For block (CMU) or poured concrete walls, an
optional wall sleeve is available.
AVAILABLE CONTROLS:
Recommended with I-CON electronic (AC or battery powered) basin and
flush valves for water savings, enhanced security and performance and
reduced maintenance costs. Call Commercial Customer Service for full
details. Air operated valves are also available.
HDCU1318C
Center configuration
HDCU1318R
Right configuration
HDCU1318L
Left configuration
152
SECURITYWARE
VIEW / DRAWING
Securityware
Combi units, toilets & urinals
VIEW / DRAWING
TYPE / MODEL
Toilet
SECURITYWARE
This Heavy Duty Water Closet (Toilet) is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge
(2.0mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is
drawn and seamlessly welded and polished to a #4 satin finish. The toilet
seat is polished to a sanitary mirror finish. Internal piping is also 14 gauge
(2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out
jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet
was tested and certified as a low water consumption toilet using only 1.6
gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5"
(88.9mm) min. The waste outlet extends a minimum of 3" behind the
fixture and has a plain end OD of 2 3/8" (60.3mm). Flush valve connection
is 1 1/2" (38.1mm) FIPT rear spud.
INSTALLATION:
serviceable from a pipe chase. Installation is achieved by threading 5 x
1/2" (13mm) diameter threaded anchor rods to the back of the fixture. The
anchor rods are then secured on the chase side of the wall by means of
the supplied nuts and washers. Standard included hardware is for walls up
HDWC2414-RM
rear mounted
Urinal
This Heavy Duty Urinal is designed for areas requiring the utmost in vandal
resistance. The fixture is fabricated from heavy 14 gauge (2.0mm) type
304 (CNS 18/10) stainless steel. The fixture is seamlessly welded and
polished to a #4 satin finish. The urinal has an integral flushing rim for
sanitary wash down. Includes integral beehive strainer and 1 1/2"
(38.1mm) removable P-Trap (concealed within shroud). The fixture is
tested and certified to ASME A112.19.2-2008/CSA B45.1-08 as a Low
Consumption Urinal using 1.0 gpf / 3.8 lpf or less.
INSTALLATION:
1/2" (13mm) diameter threaded anchor rods to the back of the fixture. The
anchor rods are then secured on the chase side of the wall by means of
the supplied nuts and washers. Standard included hardware is for walls up
HDU1314-RM
rear mounted
153
Securityware
Wash basins & sinks
TYPE / MODEL
Security Basin
This Heavy Duty Public Wash Basin is designed for areas requiring the
(2.0mm) type 304 (CNS 18/10) stainless steel and polished to a #4 satin
finish. These fixtures are designed to be installed onto finished walls by
means of a wall hanger bracket. Supply and waste lines must be roughed
out of wall for connection. Wall anchor hardware (bolts and anchors) are
not included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
INSTALLATION:
not accessible from a pipe chase. Installation is achieved by means of a
wall hanger bracket and lower mounting hole
Specify faucet punching with order.
HDPWB1518
front mounted
Security Basin
This Heavy Duty Security Basin is designed for areas requiring the utmost
in vandal resistance. The fixture is fabricated from heavy 14 gauge
(2.0mm) type 304 (CNS 18/10) stainless steel. It is seamlessly welded and
polished to a #4 satin finish. Certified to ASME A112.19.3-2008 / CSA
B45.4-08.
INSTALLATION:
1/2" (13mm) diameter anchor rods to the back of the fixture. The anchor
rods are then secured on the chase side of the wall with supplied
hardware. Standard included hardware is for walls up to 8" (203.2mm)
thick. For existing walls, an optional metal cutout template is available. For
block (CMU) or poured concrete walls, an optional wall sleeve is available.
AVAILABLE CONTROLS:
Recommended with I-CON electronic (AC or battery powered) basin
valves for water savings, enhanced security and performance and reduced
maintenance costs. Call Commercial Customer Service for full details. Air
operated valves are also available featuring a self closing valve with a
non-hold open feature. Flow time is adjustable from approximately 5 to
60 seconds and has a flow rate of 0.5gpm (1.9 l). The valve is operated by
a vandal resistant push button which requires less than 5lbs to operate.
The valve can be mounted up to 10 feet (3 meters) away from the push
button. Valve conforms to the requirements of ASME A112.18.1-2005/CSA
B125.1-05. See basin valve options for available configurations.
HDSB1318-RM
rear mounted
154
SECURITYWARE
VIEW / DRAWING
Securityware
Wash basins & sinks
VIEW / DRAWING
TYPE / MODEL
Security Basin
This Heavy Duty Security Basin is designed for areas requiring the utmost
in vandal resistance. The fixture is fabricated from heavy 14 gauge
(2.0mm) type 304 (CNS 18/10) stainless steel. It is seamlessly welded and
polished to a #4 satin finish.
SECURITYWARE
INSTALLATION:
wall hanger bracket and lower mounting holes. Mounting hardware and
plumbing are all self contained and only accessed by a removable panel.
The panel is secured with tamper resistant screws.
AVAILABLE CONTROLS:
HDSB1418-FM
front mounted
155
Securityware
Wash basins & sinks
TYPE / MODEL
Security Basin
This Heavy Duty Security Wheel Chair Accessible Basin is designed for
areas requiring the utmost in vandal resistance. The fixture is fabricated
from heavy 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. It is
seamlessly welded and polished to a #4 satin finish. Certified to ASME
A112.19.3-2008 / CSA B45.4-08.
INSTALLATION:
hardware. (Standard included hardware is for walls up to 8" (20cm) thick).
For existing walls, an optional metal cutout template is available. For
block (CMU) or poured concrete walls, an optional wall sleeve is available.
AVAILABLE CONTROLS:
AHDSB1918-RM
rear mounted
156
SECURITYWARE
VIEW / DRAWING
Securityware
Wash basins & sinks
VIEW / DRAWING
TYPE / MODEL
Security Basin
This Heavy Duty Security Wheel Chair Accessible Basin is designed for
areas requiring the utmost in vandal resistance. The fixture is fabricated
from heavy 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. It is
seamlessly welded and polished to a #4 satin finish. Certified to ASME
A112.19.3-2008 / CSA B45.4-08.
SECURITYWARE
INSTALLATION:
AVAILABLE CONTROLS:
Recommended with I-CON electronic (AC or battery powered) basin and
flush valves for water savings, enhanced security and performance and
reduced maintenance costs. Call Commercial Customer Service for full
details. Air operated valves are also available featuring a self closing valve
with a non-hold open feature. Flow time is adjustable from approximately
5 to 60 seconds and has a flow rate of 0.5gpm (1.9 l). The valve is
operated by a vandal resistant push button which requires less than 5lbs
to operate. The valve can be mounted up to 10 feet (3 meters) away from
the push button. Valve conforms to the requirements of ASME A112.18.12005/CSA B125.1-05. See basin valve options for available configurations.
AHDSB1918-FM
front mounted
157
Securityware
Wash basins & sinks
TYPE / MODEL
Security Basin
This Heavy Duty Floor Service Sink is designed for areas requiring the
(2.0mm), type 304 (CNS 18/10) stainless steel. It is seamlessly welded
and polished to a #4 satin finish. Standard waste is a 2 3/8" OD Plain End
Elbow. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
INSTALLATION:
hardware. (Standard included hardware is for walls up to 8" (20cm)
thick). For existing walls, an optional metal cutout template is available.
For block (CMU) or poured concrete walls, an optional wall sleeve is
available.
AVAILABLE CONTROLS:
The basin is controlled with an air-operated self closing valve with a
non-hold open feature. Flow time is adjustable from approximately 5 to 60
seconds which has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated
by a vandal resistant push button which requires less than 5lbs to operate.
The valve can be mounted up to 10 feet (3meters) away from the push
HDFSS1821-RM
rear mounted
158
SECURITYWARE
VIEW / DRAWING
Securityware
Wash basins & sinks
VIEW / DRAWING
TYPE / MODEL
Security Basin
This Heavy Duty Wall Service Sink is designed for areas requiring the
SECURITYWARE
INSTALLATION:
hardware. For existing walls, an optional metal cutout template is
available. For block (CMU) or poured concrete walls, an optional wall
sleeve is available. (Standard included hardware is for walls up to 8"
(20cm) thick).
AVAILABLE CONTROLS:
HDWSS1821-RM
rear mounted
159
Securityware
Wash basins & sinks
TYPE / MODEL
Security Basin
This Heavy Duty Floor Service Sink is designed for areas requiring the
INSTALLATION:
not serviceable from a pipe chase. Installation is achieved by means of a
wall hanger bracket and lower mounting holes. All fasteners are concealed
with tamper proof screws.
AVAILABLE CONTROLS: The basin is controlled with an air-operated self closing valve with a
Valve conforms to the requirements of ASME A112.18.1-2005/CSA B125.105. See basin valve options for available configurations.
HDFSS2021-FM
front mounted
160
SECURITYWARE
VIEW / DRAWING
Securityware
Wash basins & sinks
VIEW / DRAWING
TYPE / MODEL
Security Basin
This Heavy DutyWall Service Sink is designed for areas requiring the
and polished to a #4 satin finish. Standard waste is a 2" Removable
P-Trap. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
SECURITYWARE
INSTALLATION:
AVAILABLE CONTROLS:
seconds and has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by
B125.1-05.
HDWSS2021-FM
front mounted
161
Securityware
Drinking fountains
TYPE / MODEL
Heavy Duty Drinking Fountain
Vandal resistant 14 gauge (2.0mm) stainless steel low flow drinking
fountain. Waterways are lead-free in materials and construction. Drinking
fountains have built-in 100 micron strainer stops particles before they
enter the waterway. Stainless Steel Top One Piece, Low Flow, Chrome
plated brass bubbler. Heavy Duty Galvanized Steel Frame. Vandal resistant
front manual activation. Cabinets have perforated galvanized steel screens
to prevent objects from being inserted into the drinking fountain. Unit will
comply with wheelchair accessibility when properly installed.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average
lead content of <=0.25%) and is in compliance with California's Health &
Safety Code Section 116875 (commonly known as AB1953). Models
covered by this specification comply with all known Plumbing Codes.
Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
KEPGV8AC-14G
with 8 gph high efficiency chiller
KEPVAC-14G
Optional filter kit 033926-001
033926-001
Optional filter kit (more details page 206)
Vandal resistant 14 gauge (2.0mm) stainless steel low flow split level
drinking fountain. Waterways are lead-free in materials and construction.
Drinking fountains have built-in 100 micron strainer stops particles before
they enter the waterway. Stainless Steel Top One Piece, Low Flow, Chrome
Optional filter kit 033926-001
KEPGV8ACSL-14G
with 8 gph high efficiency chiller, stainless steel
KEPVACSL-14G
non-chilled
033926-001
162
SECURITYWARE
VIEW / DRAWING
Securityware
Shower panels
VIEW / DRAWING
TYPE / MODEL
Shower panel
This heavy duty shower panel is designed for areas requiring the utmost in
vandal resistance.The fixture is fabricated from heavy 14 gauge (2.0mm
thick) type 304 stainless steel. It is seamlessly welded and polished to a
satin finish.
Shower head has a flow rate of 6 L/min and is equipped with an air
operated self closing valve.
SECURITYWARE
AVAILABLE CONTROLS:
Recommended with I-CON electronic (AC or battery powered) shower
maintenance costs. Call Commercial Customer Service for full details.
Also available with a self closing air operated valve.
HDSP2408-RM
Rear Mounted:
This fixture is designed to be installed onto finished walls which are
accessible from a pipe chase. Installation is achieved by threading (6) 1/2"
(13mm) diameter anchor rods to the back of the fixture. The anchor rods
are then secured on the chase side of the wall with supplied hardware.
For block (CMU) or poured concrete walls, an optional wall sleeve is
available.
Shower panel
This heavy duty shower panel is designed for areas requiring the utmost in
vandal resistance.The fixture is fabricated from heavy 14 gauge (2.0mm
thick) type 304 stainless steel. It is seamlessly welded and polished to a
satin finish.
Shower head has a flow rate of 6 L/min and is equipped with an air
operated self closing valve.
AVAILABLE CONTROLS:
Also available with a self closing air operated valve.
HDSP2412-FM
Front mounted with access panel with security screws
163
Securityware
Shower panels and stainless steel mirrors
TYPE / MODEL
Shower panel
This heavy duty shower panel is fabricated from heavy 14 gauge (2.0mm)
type 304 stainless steel. It is seamlessly welded and polished to a satin
finish. Shower head has a flow rate of 6 L/min.
servicable from a rear pipe chase. Installation is achieved by threading
1/2" (13mm) diameter anchor rods to the back of the fixture plate. The
anchor rods are then secured on the chase side of the wall with supplied
hardware.
AVAILABLE CONTROLS:
Also available with an air operated self closing valve adjustable from
approximately 5 to 60s.
Overall height: 3 1/2" " (89 mm)
SC1-RM
Stainless steel mirrors
One piece, 1/4" (6mm) side formed, type 304 (CNS18/10), 20 gauge
(0.9mm), frameless stainless steel mirror with Excel Buff #8 finish. Fully
laminated with 1/4" (6mm) thick masonite, complete with 4 mounting
holes and stainless steel #10 x 1/2" R.H. one-way tamper proof
screws. Mirrors can be installed horiztonally or vertically. Overall front to back: 1/4" (6 mm)
F3300-1824
NEW
F3300-1830
NEW
F3300-2436
NEW
Overall left to right: 23 1/2" (597 mm))
164
SECURITYWARE
VIEW / DRAWING
WHY USE FRANKE I-CON PRODUCTS?
The I-CON brand of electronic plumbing control systems are more reliable and less
expensive to maintain than the traditional mechanical and pneumatic systems commonly found in our industry. The I-CON system can be used in new construction
and retrofit work.
REVOLUTIONARY WATER SAVING TECHNOLOGY
I-CON contains fewer moving parts and better materials than the
competition, substantially reducing the likelihood of part failures.
CUSTOMIZABLE SECURITY CONTROL WITH ENVISAGE
Proprietary software and hardware allows our customers to take
complete control of their plumbing system from a remote desktop or
control station. The ultimate in control at a person's fingertips.
PREVENT “TOILET FIRES” (Flush valves that do not seal due to low
water pressure and continuous flow).
Our flush valve seals with minimal water pressure (3-5psi); therefore
preventing inmate induced and other toilet fires.
INSTALL OUR FLUSH VALVES REMOTELY
Our flush valve can be located up to 60 feet (18 metres) from the
applicable fixture.
Q. & A.
What are the best-practices for electronic plumbing controls in
jails? In prisons?
Electronic plumbing controls are suited for high security areas, where
a plumbing system is subject to a high level of abuse by inmates and
the facility’s control of water is often limited. The ability to control
water consumption while managing security issues are two of the
greatest advantages offered by electronics.
How does a flush valve system (as opposed to another type of
system) save water in a correctional setting?
With an electronic flush valve system you can control runtimes and
lockouts as well as the amount of water used during each flush. The
key factor is reducing the amount of water that is used for every flush,
where 90 percent of the actual savings comes from. The other 10
percent is achieved by the lockout features where the number of
165
flushes is limited per hour. For example, our system can take a
3.5-gallon fixture’s flush down to 1.6 gallons and a 1.6 fixture down to
0.9 gallons and still pass all plumbing tests and comply with plumbing
codes. Our electronic flush valve is linked to a controller that allows
the facility to control how much they would like to save based on their
setting; the savings can add up quickly.
What security measures does the flush valve system contain to
ensure it is tamper proof?
Typically, most facilities will have a manual flush valve with little to no
control of how often an inmate can flush. Inmates will use the toilet to
flush bed sheets, clothing and contraband. We’ve designed a system
where if an inmate flushes twice within five minutes, the control panel
locks the toilet for an hour. Inmates will also often abuse a typical
system by flushing repeatedly to lower the water pressure, which will
not allow a manual flush valve to seal and eventually floods the cell.
We’ve solved that problem by designing an electronic flush valve that
will seal with minimal water pressure, preventing inmate-induced and
other potential flooding scenarios. Officers can also use a computer
monitoring system linked to each flush valve to see who is pushing the
flush button like crazy and can shut down the water before a
contraband search. The officers can then go search that particular
cell first.
market. Maintenance personnel prefer our systems because they
spend a minimal amount of time servicing them. Government officials
and facility managers also prefer our products because they see the
cost savings, added security, reliability, and the overall benefits of
working with our systems. Their maintenance staff is no longer
fighting a losing battle trying to keep the plumbing system functional
and secure.
How many facilities have installed your company’s flush valve
system? Are most of your jobs in jails or prisons?
Live Customer Support
Over 400 facilities throughout the U.S. and Canada have installed our
products. They range from Federal Bureau of Prison (FBOP) facilities,
to state prisons and county jails. They all share a common objective:
to increase security and improve water conservation.
Contact Customer Service at 1-855-446-5663
Ease of installation and maintenance
Our retrofit systems are easy to switch to and easy to maintain. The
quality and durability of our products decreases the frequency of
rebuilding/replacing parts that wear or degrade over time, which
reduces labour and parts costs. Typically, our consumable parts last
at least three times longer than the other comparable products on the
166
36
Securityware
I-CON® water controls
water saving products in our plumbing controls range.
This intelligent system provides penal facilities with the
ultimate in water savings and control over water usage.
EXPERIENCE THE ADVANTAGES
Below are just a few examples of the ways in which I-CON®
plumbing controls are the ideal solution in water conservation.
4
1
centralized control system
lavatories may be managed with a single controller
8
70%
showers or water closets may be managed with a single controller
up to
reduction in water usage attainable with an I-CON system
80%
90%
2-5
32,000
save up to
save up to
in maintenance costs
in spare parts inventory
year payback average
up to
167
valves can be controlled with a single ENVISAGE® system
ELECTRONIC CONTROL KITS
I-CON® Combi Kit
-- CTR-X12-AC-04
Designed for
HDCU1318C
(not included)
SECURITYWARE
-- VLV-FVL-3801-S
-- VLV-LAV-4811
(4800 Series in single hot and cold
configuration)
-- SEN-1501
-- TRS-PI-120V Series
I-CON® Water Closet Kit
-----
CTR-X11-S-01
VLV-FVL-3801-S
SEN-1501
TRS-PI-120V Series
Designed for
HDWC2414-RM
(not included)
I-CON® Lavatory Kit
-- CTR-X12-AC-04
-- VLV-LAV-4811
(4800 Series in single hot and cold
configuration)
-- SEN-1501
-- TRS-PI-120V Series
Designed for
HDSB1318
(not included)
I-CON® Shower Kit
-----
CTR-X11-S-01
VLV-SHW-5775
SEN-1501
TRS-PI-120V Series
Designed for
HDSP2408
(not included)
I-CON® Urinal Kit
-----
CTR-X11-S-01
VLV-FVL-3801-S
SEN-1501
TRS-PI-120V Series
Designed for
HDU1314
(not included)
168
Securityware
by
WHY IT WORKS:
F
E
A
T
U
R
E
S
- Safe, low voltage system
- Waterproof, stainless steel
sensors/buttons
- Modular components allow for
easy repair and replacement to
minimize downtime
- Microprocessor-based controls
- Program modification capability
- System override capability
S
- Vandal resistant system
SHOWER
FIXTURES
SHOWER BANK
The I-CON® System uses a pro-
The stainless steel sensors/buttons are
Once the controller has been pro-
grammable
to
waterproof, have no moving parts, and
grammed, memory is retained, even
operate and control showers.
are designed to be vandal-resistant.
during a loss of power.
When the sensor/button is acti-
The sensor/button and solenoid as-
A unique modular plug-in system,
vated by the bather, it sends a
semblies connect to the controller
similar to the type of plug found on
signal to the controller which
which is easily mounted on the wall
your telephone, simplifies installation
then signals the solenoid valve to
inside the plumbing chase. The con-
on new and retrofit applications.
open - thereby allowing tempered
troller features an amber LED to show
water to flow to the showerhead.
that the controller is powered, and a
The water will continue to flow
green LED adjacent to each Input and
until either the bather presses the
Output that lights separately when
sensor/button again, or the pro-
the associated hardware (i.e., shower
grammed run-time has expired.
valve) is in operation.
169
microprocessor
Securityware
I-CON water controls
WHY IT WORKS:
by
P R O G R A M M E D TO SAV E
- Control Lock-outs
COMBINATION FIXTURES
SECURITYWARE
- Control Run Times
- Control the Savings
C
COMBINATION
FIXTURES
V-CHASE
This electronic water closet and
parts, and are designed to be van-
that allows maintenance personnel
lavatory control utilizes force acti-
dal resistant. The sensor/button
to override the “lockout” feature.
vated sensor technology. When
and solenoid assemblies connect to
A unique Modular Plug-in System,
the user presses the sensor/but-
the controller which is easily mount-
similar to the type of plug found on
ton housing, the sensor/button
ed on the wall inside the plumbing
your telephone, simplifies installation
sends a signal to the controller
chase. The controller features an
on new and retrofit applications. The
which then signals the solenoid
amber LED to show that the control-
controller is a microprocessor that can
valve to open, thereby allowing
ler is powered, and a green LED adja-
be programmed with stored instruc-
the water to flow to the fixture.
cent to each Input and Output which
tions to operate a plumbing fixture.
The water will continue to flow
lights separately when the associ-
These instructions can include: fixture
for the programmed run-time. The
ated hardware (i.e.: bubbler head,
run-time, timing delays to prevent user
stainless steel sensors/buttons
flush valve) is in operation. The con-
abuse, and a “lockout” time.
are waterproof, have no moving
troller comes equipped with a button
170
Securityware
STA
IN
LE
SS
SYSTEM ANATOMY - RETROFIT
STE EL S H
K
Y
ZEP H
T
RE
ER
P LU
PNEU MATIC
24VAC POWER
TO SHOWERHEAD
PLUG-IN
TRANSFORMER
ZEPHYR ®
PNEUMATIC
BLOCK
TO SHOWERHEAD
RETRO-FIT
CARTRIDGE
EXISTING
CHECK STOP
EXISTING
MECHANICAL
VALVE BODY
TEMPERED
WATER INLET
TEMPERED
WATER INLET
NEXUS ®
4IO CONTROLLER
WATER TIGHT
CONNECTOR
TYP.
U
TO
C H ® SE NS
O
RS
U
LL
TR
C O N T RO
S
NE
®
US
ER
X
SHOWER
TruTOUCH ®
SENSOR BUTTON
171
S
G
R®
ER
I T C A RT R I D
OC
BL
F
RO
W
R
O
TRAN SFO
ES
IN
G-
M
SECURITYWARE
Shower Fixtures
Securityware
STA
IN
LE
SS
SYSTEM ANATOMY - RETROFIT
STE EL C O
SECURITYWARE
U
M O M E NT
T
RE
L
LV
H VA E
K
ZEP H
M
R E T R O FIT F
S
G
®
B IE
I T C A RT R I D
US
F
RO
M
PNEU MATIC
ES
R®
OC
BL
Y
Combination Fixtures
TO BUBBLER
TO BUBBLER
ZEPHYR
PNEUMATIC
BLOCK
®
EXISTING
CHECK STOP
HOT WATER
INLET
COLD WATER
INLET
HOT WATER
INLET
RETRO-FIT
CARTRIDGE
MECHANICAL
VALVE BODY
EXISTING
CONTROL STOP
COLD WATER
INLET
®
MOMENTUM
FLUSH VALVE
24VAC POWER
VACUUM BREAKER
ASSEMBLY
NEXUS ®
8IO CONTROLLER
BOX MOUNT
TRANSFORMER
LL
U
C O N T RO
U
TO
CH ® SENS
S
S
TR
®
US
OR
X
E
NE
RANSFOR M
HOT WATER
TruTOUCH ®
SENSOR BUTTON
ER
T
OX
FLUSH
TruTOUCH ®
COLD WATER SENSOR BUTTON
®
TruTOUCH
SENSOR BUTTON
R
B
WATER TIGHT
CONNECTOR
TYP.
All photographs are subject to copyright protection and used with permission.
172
Securityware
STA
IN
LE
SS
SYSTEM ANATOMY - NEW CONSTRUCTION
STE EL S H
P
P R E -T E M
5S
D S H OWER
M
IF O L D
577
E
ER
AN
ER
P LU
R
S
S SHOWE
ER
IE
ER
W
R
5775 SERIES
SHOWER VALVE
TO SHOWERHEAD
PRE-TEMPERED SINGLE
SHOWER MANIFOLD
24VAC POWER
PLUG-IN
TRANSFORMER
TO SHOWERHEAD
MOUNTING HOLES
CHECK STOP
TEMPERED
WATER INLET
NEXUS ®
4IO CONTROLLER
WATER TIGHT
CONNECTOR
TYP.
173
U
TO
C H ® SE NS
O
RS
U
LL
TR
C O N T RO
S
NE
®
US
ER
X
SHOWER
TruTOUCH ®
SENSOR BUTTON
O
TRAN SFO
LVE
VA
IN
G-
M
SECURITYWARE
Shower Fixtures
Securityware
STA
IN
LE
SS
SYSTEM ANATOMY - NEW CONSTRUCTION
STE EL C O
H
SECURITYWARE
ME
M ® F LU S
MO
S
E LE
U
NT
S
T ® M A NI F O
B IE
M
EN
LVE
VA
ME
M
NSFOR
LD
®
ELEMENT
DUAL MANIFOLD
TO BUBBLER
MOUNTING HOLES
CHECK STOP
HOT WATER IN
COLD WATER IN
24VAC POWER
1" BALL VALVE
®
MOMENTUM
FLUSH VALVE
NEXUS ®
8IO CONTROLLER
BOX MOUNT
TRANSFORMER
VACUUM BREAKER
ASSEMBLY
WATER TIGHT
CONNECTOR
TYP.
U
LL
U
TO
CH ® SENS
S
S
TR
C O N T RO
OR
®
US
HOT WATER
TruTOUCH ®
SENSOR BUTTON
ER
X
FLUSH
TruTOUCH®
COLD WATER SENSOR BUTTON
TruTOUCH ®
SENSOR BUTTON
NE
O
RA
XT
R
B
Combination Fixtures
174
Securityware
Our I-CON® Products
versus
(Dual Lavatory Manifolds)
 Checkstops
 Integrated mounting system
SECURITYWARE
 Checkstops
 Integrated mounting system
The Competition
ELEMENT® Manifolds
 Low Profile
Solenoid Mounting
Design
 Watertight Lead to
Solenoid Connection
 Watertight
Connectors
 Low Profile
Solenoid Mounting
Design
versus
(Pneumatic Block)
 Watertight Lead to  Watertight
Solenoid Connection
Connectors
The Competition
ZEPHYR® Pneumatic Retrofit Block
 No Moving Parts
 No Diaphram
 Manual Override
175
 No Moving Parts
 No Diaphram
 Manual Override
Securityware
versus
(8 I/O AC Controller)
 Hinge & screw cover enclosure
SECURITYWARE
 Hinge & screw cover enclosure
The Competition
NEXUS® Controller
 Port Identification &  Water Resistant
On/Off Power Switch Enclosure with Inner
O-ring Seal
 4 Point Integrated
Mounting System
 Port Identification &  Water Resistant
On/Off Power Switch
versus
(4 I/O AC Controller)
 Hinge & screw cover enclosure
Enclosure with Inner
O-ring Seal
 4 Point Integrated
Mounting System
The Competition
 Hinge & screw cover enclosure
NEXUS® Controller
 Port Identification &  Water Resistant
On/Off Power Switch Enclosure with Inner
O-ring Seal
 4 Point Integrate
Mounting System
 Port Identification &  Water Resistant
On/Off Power Switch
Enclosure with Inner
O-ring Seal
 4 Point Integrated
Mounting System
176
Securityware
The Competition
SECURITYWARE
versus
(Actuator Button)
TruTOUCH® Sensor
 No Moving Parts
 No Diaphram
 Manual Override
 No Moving Parts
versus
(24 VAC Solenoid)
 No diaphram
 One solenoid type for toilets,
lavatories, showers & urinals
 No Diaphram
 Manual Override
The Competition
 No diaphram
 One solenoid
type for
toilets,
lavatories,
showers &
urinals
TruFIRE® Solenoid
 Manual Override
 Integrated Core
tube
 Piston Retainer
177
 Manual Override
 Integrated Core
tube
 Piston Retainer
Securityware
The Competition
SECURITYWARE
versus
(Lead Cable Connector)
 Watertight
Anticorrosive
Connection
 Integrated
Connectors
 Easy Connect
Guided Alignment
 Watertight
Anticorrosive
Connection
 Integrated
Connectors
 Easy Connect
Guided Alignment
Samples of Field Success
THE CHALLENGES:
THE SOLUTIONS:
Prison and jail facilities around the country have a common security,
expense and maintenance issue: their plumbing fixtures. The toilets
and lavatories in correctional institutions are an aspect of inmate
activities that are “uncontrolled”. The result is high use and abuse of
the fixtures, leading to increased costs and reduced security. The
most common issues for correctional plumbing fixtures are:
Franke’s I-CON® plumbing systems puts the control of the plumbing
fixtures in the hands of those operating the facility, and out of the
hands of the inmates. Basically, the system replaces existing,
“static” plumbing components with “controllable” components. By
activating lavatories and toilets with electronic devices, rather than
“standard” ones, the plumbing fixtures can be controlled. The
I-CON® plumbing system is unique in the industry, as it is the only
product available that can be easily and inexpensively retrofitted to
all types of existing plumbing fixtures (new installations are also
available). Benefits include:
1. Excessive toilet use
1. Reduction of water and sewer expense
The industry average for toilet flushes per day can be upwards of 40,
leading to an enormous waste of water, and the accompanying water
and sewer charges.
This is accomplished in two ways. First, the toilet flush is reduced
from the existing 3.5 or 5 gallon flush (13.24 or 19 litres) to to a
maximum of 1.6 gallons (6 litres) per flush - a minimum of 50%
reduction in consumption. Secondly, the system reduces the
average number of flushes per day due to the programmed flush
mechanism. Prison operators set the number of toilet flushes per
hour/per fixture, which can reduce expenses by 25% or more. Water
and sewer savings alone can pay for a Franke I-CON® plumbing
system.
2. Excessive use of plumbing fixtures
2. Fewer diaphrams
Wear and tear from excessive use increases maintenances costs
- mostly in diaphrams, replacement parts and labour.
Due to the near elimination of metering diaphrams in both flush and
lavatory valves, the cost of diaphrams, replacement parts and
associated labour are reduced as much as 80%.
3. Abuse of plumbing fixtures
3. Control over fixture run times
Inmates’ abuse of plumbing fixtures, including the practice of
flushing contraband, leads to reduced facility control and security
and potentially dangerous situations.
Flooding of cells or clogging of plumbing systems becomes much
more difficult when the inmates cannot rapidly flush fixtures;
therefore reducing expensive maintenance.
178
179
Drinking Fountains
Classic
VIEW / DRAWING
TYPE / MODEL
Chilled Drinking Fountain
Free standing chilled drinking fountain. Waterways are Lead-Free in
Materials & Construction. Stainless steel top with heavy gauge steel
frame. High-Efficiency Cooling Tank and Coil. Dial-a-drink bubbler.
Compressor is hermetically sealed, reciprocating type, single phase,
lifetime lubrication. The condenser is cooled with a permanently lubricated
fan motor. Stainless steel cooilng tank with continuous copper tubing.
Factory preset thermostat, (adjustable to compensate for altituted requirements) easily accessible by removal of front panel. R134a refrigerant.
DRINKING
FOUNTAINS,
CLASSIC
12 5/8" x 12 1/8" x 44" (321 x 308 x 1117 mm)
KEP3CP-SND
3 gph chiller, sandstone finish
KEP3CP-STN
3 gph chiller, stainless
KEP5CP-SND
KEP5CP-STN
KEP10CP-SND
KEP10CP-STN
Free standing chilled drinking fountain. Waterways are Lead-Free in
KEP8FA-SND
KEP8FA-STN
14" x 17" x 43 7/8" (356 x 432 x 1114 mm)
KEP8FA-SND
KEP8FA-STN
180
Drinking Fountains
Classic
VIEW / DRAWING
TYPE / MODEL
Wall mounted chilled drinking fountain. Waterways are Lead-Free in
Listed by Underwriters’ Laboratories to U.S. and Canadian standards..
DRINKING
FOUNTAINS,
CLASSIC
13 3/16" x 17" x 18 15/16" (335 x 432 x 481 mm)
KEPLF4CM-SND
KEPLF4CM-STN
4 gph chiller, stainless steel
Non-Chilled Drinking Fountain
Wall mounted unchilled drinking fountain with stainless steel cabinet and
dial-a-drink bubbler. Waterways are Lead-Free in Materials & Construction. Stainless steel top with heavy gauge steel frame.
KEF100-STN
181
Drinking Fountains
Classic
TYPE / MODEL
Special purpose free standing water cooled drinking fountain. Delivers
15.5 gph of chilled drinking water, standard cabinet finish is sandstone
powder coat paint on galvanized steel.
Waterways are Lead-Free in Materials & Construction. Stainless steel top
with heavy gauge steel frame. High efficiency cooling tank and coil.
Dial-a-drink bubbler.
14" x 17" x 43 7/8" (356 X 432 X 11114 mm)
KEPLF16FAW-SND
sandstone finish
DRINKING
FOUNTAINS,
CLASSIC
VIEW / DRAWING
Corrosion Resistant, Chilled Drinking Fountain
Special purpose free standing water cooled drinking fountain. Special
protective coating is applied to compressor, condenser, cooling tank,
pre-cooler, water drain and interconnecting water and refrigeration lines.
Waterways are Lead-Free in Materials & Construction. Stainless steel top
with heavy gauge steel frame. High efficiency cooling tank and coil.
Dial-a-drink bubbler.
14" x 17" x 43 7/8" (356 x 432 x 1114 mm)
KEP16FAWHDCP-STN
delivers 15.5gph of chilled water, enhanced corrosion resistant stainless
steel cabinet, frame, base parts and fasteners
KEPLF20FACP-STN
delivers 20 gph of chilled drinking water, corrosion resistant, stainless
steel cabinet, frame, and fasteners.
182
Drinking Fountains
Classic
VIEW / DRAWING
TYPE / MODEL
Wall mounted unchilled drinking fountain for exposed supply and waste
with dial a drink bubbler. Includes chrome-plated brass strainer and
tailpiece. Waterways are Lead-Free in Materials & Construction. Stainless
steel top with heavy gauge steel frame.
13 1/16" x 12 15/16" x 15 15/16" (332 x 328 x 405 mm)
DRINKING
FOUNTAINS,
CLASSIC
KEF120-STN
Wall mounted unchilled drinking fountain with vandal resistant push
button. Waterways are Lead-Free in Materials & Construction. Stainless
14 1/8" x 13" x 10 1/16" (359 x 330 x 278 mm)
KEF110PM-STN
Non-Chilled, Extended Drinking Fountain
Wall mounted unchilled drinking fountain with vandal resistant push
button. Waterways are Lead-Free in Materials & Construction. Stainless
19 13/16" x 13" x 10 1/16" (503 x 330 x 278 mm)
KEF140PM-STN
extended version, 19 13/16" (503mm) front to back, wheelchair compliant
183
Drinking Fountains
Classic
TYPE / MODEL
Wall mounted chilled drinking fountain. Waterways are Lead-Free in
DRINKING
FOUNTAINS,
CLASSIC
VIEW / DRAWING
KEP8M-SND
KEP8M-STN
Wall mounted drinking fountain. Waterways are Lead-Free in Materials &
Construction. Stainless steel top with heavy gauge steel frame. Dial-adrink bubbler.
13 3/16" x 17" x 18 15/16" (335 x 432 x 481 mm)
KEPCM-SND
sandstone finish
KEPCM-STN
stainless steel cabinet
184
Drinking Fountains
Modular
VIEW / DRAWING
TYPE / MODEL
Single chilled stainless steel fountain. Heavy duty galvanized steel wall
mounting frame with brushed stainless panels. Waterways are Lead-Free
in Materials & Construction. Built-in 100 micron strainer stops particles
before they enter the waterway. Free flow bubbler. Unit will comply with
wheelchair accessibility when properly installed. Installation instructions
included.
19" x 19 3/4" x 40 13/16" (473 x 502 x 1036 mm)
DRINKING
FOUNTAINS,
MODULAR
KEM8SBPM-STN
8 gph chiller, with mechanical push button.
KEM8SBEE-STN
8 gph chiller, Infrared sensors activate water flow.
033926-002
Low Mount Non-Chilled Drinking Fountain
Single low mount stainless steel fountain unchilled . Heavy duty galvanized
steel wall mounting frame with brushed stainless panels. Waterways are
Lead-Free in Materials & Construction. Built-in 100 micron strainer stops
particles before they enter the waterway. Free flow bubbler. Mechanical
push button. Unit will comply with wheelchair accessibility when properly
installed. Installation instructions included.
19 13/16" x 19 3/4" x 18 1/4" (504 x 502 x 464 mm)
KEM140PM-STN
185
Drinking Fountains
Modular
TYPE / MODEL
Single mid mount fountain unchilled. Heavy duty galvanized steel wall
mounting frame with brushed stainless panels. Waterways are Lead-Free
in Materials & Construction. Built-in 100 micron strainer stops particles
before they enter the waterway. Free flow bubbler. Mechanical push
button. Installation instructions included.
14 3/16" x 19 3/4" x 18 1/4" (360 x 502 x 464 mm)
KEM110PM-STN
DRINKING
FOUNTAINS,
MODULAR
VIEW / DRAWING
Sensor Activated Chilled Drinking Fountain
Split level stainless steel drinking fountain chilled. Heavy duty galvanized
particles before they enter the waterway. Free flow bubbler. Unit will
comply with wheelchair accessibility when properly installed. Installation
instructions included.
19" x 39 1/2" x 40 13/16" (473 x 1003 x 1036 mm)
KEM8SCPM-STN
8 gph chiller, Mechanical activation.
KEM8SCEE-STN
with 8gph chiller, Manual push button activation on upper unit and infrared
sensor activation on lower unit.
033926-002
186
Drinking Fountains
Modular
VIEW / DRAWING
TYPE / MODEL
Split level stainless steel drinking fountain unchilled . Heavy duty
galvanized steel wall mounting frame with brushed stainless panels.
Waterways are Lead-Free in Materials & Construction. Built-in 100 micron
strainer stops particles before they enter the waterway. Free flow bubbler.
Mechanical push button. Unit will comply with wheelchair accessibility
when properly installed. Installation instructions included.
19 9/16" x 39 1/2" x 18 5/16" (497 x 1003 x 464 mm)
DRINKING
FOUNTAINS,
MODULAR
KEMSSLPM-STN
non-chilled
Sensor Activated Chilled Drinking Fountain
Single bowl stainless steel fountain chilled. Heavy duty galvanized steel
wall mounting frame with brushed stainless panels. Waterways are
particles before they enter the waterway. Tamper proof flexible bubbler.
Unit will comply with wheelchair accessibility when properly installed.
Installation instructions included.
18 1/4" x 19 3/4" x 40 3/4" (464 x 502 x 1035 mm)
KEM8WR-STN
with 8 gph chiller, manual activation.
KEM8WREE-STN
With 8gph chiller, infrared sensors activate water flow.
033926-002
187
Drinking Fountains
Modular
TYPE / MODEL
Mid Mount Non-Chilled Drinking Fountain
Single bowl stainless steel fountain unchilled . Heavy duty galvanized steel
18 1/4" x 19 3/4" x 18 1/4" (463 x 502 x 464 mm)
KEML110R-STN
non-chilled, mid mount
DRINKING
FOUNTAINS,
MODULAR
VIEW / DRAWING
Low Mount Non-Chilled Drinking Fountain
Single bowl stainless steel fountain unchilled . Heavy duty galvanized steel
18 1/4" x 19 3/4" x 18 1/4" (464 x 502 x 464 mm)
KEM140R-STN
non-chilled, low mount
188
Drinking Fountains
Modular
VIEW / DRAWING
TYPE / MODEL
Split level stainless steel bowl fountain unchilled . Heavy duty galvanized
Unit will comply with wheelchair accessibility when properly installed.
Installation instructions included.
18 1/4" x 39 1/2" x 18 1/4" (463 x 1003 x 464 mm)
KEMMRSL-STN
With manual activation.
DRINKING
FOUNTAINS,
MODULAR
KEMMRSLEE-STN
Manual push button activation on upper unit and infrared sensor activation
on lower unit.
Split level stainless steel bowl fountain chilled . Heavy duty galvanized
18 1/4" x 39 1/2" x 40 3/4" (463 x 1003 x 1035 mm)
KEM8CR-STN
8 gph chiller
033926-002
189
Drinking Fountains
Universal
TYPE / MODEL
Universal chilled drinking fountain. Waterways are lead-free in materials
and construction. Drinking fountains have built-in 100 micron stainers
which stop particles before they enter the waterway. Stainless steel top
with a one piece, low flow, tamper proof flexible bubbler. Heavy Duty
Galvanized Steel Frame. Unit will comply with wheelchair accessibility
when properly installed.
KEP8AC-SND
8 gph chiller, manual push pad activation, sandstone finish cabinet
KEP8AC-STN
8 gph chiller, manual push pad activation, stainless steel
033926-001
DRINKING
FOUNTAINS,
UNIVERSAL
VIEW / DRAWING
Universal drinking fountain. Waterways are lead-free in materials and
construction. Drinking fountains have built-in 100 micron strainer stops
particles before they enter the waterway. Stainless Steel Top One Piece,
Low Flow, Tamper Proof Flexible Bubbler. Heavy Duty Galvanized Steel
Frame. Manual Activation. Unit will comply with wheelchair accessibility
KEPAC-STN
stainless steel
KEPAC-SND
sandstone finish
KEPGAC-STN
low flow, stainless steel
033926-001
190
Drinking Fountains
Universal
VIEW / DRAWING
TYPE / MODEL
Chilled Vandal Resistant Drinking Fountain
KEPV8AC-STN
8 gph chiller, vandal resistant push button, no external stream height
adjustment, stainless steel
DRINKING
FOUNTAINS,
UNIVERSAL
033926-001
Chilled Vandal Resistant Drinking Fountain
KEP8ACEE-SND
8 gph chiller, infrared sensors activate water flow, sandstone cabinet
033926-001
191
Drinking Fountains
Universal
VIEW / DRAWING
TYPE / MODEL
Chilled Vandal Resistant Split Level Drinking Fountain
Universal split level chilled drinking fountain. Waterways are lead-free in
materials and construction. Drinking fountains have built-in 100 micron
strainer stops particles before they enter the waterway. Stainless Steel
Top. One Piece, Low Flow, Flexible Tamper Proof Bubbler. Heavy Duty
KEPV8ACSL-STN
adjustment, stainless steel.
Chilled Split Level Drinking Fountain
KEP8ACSLEE-SND shown
Universal split level chilled drinking fountain. Waterways are lead-free in
materials and construction. Drinking fountains have built-in 100 micron
strainer stops particles before they enter the waterway. Stainless Steel
Top. One Piece, Low Flow, Flexible Tamper Proof Bubbler. Heavy Duty
KEP8ACSL-SND
8gph chiller, manual push pad activation, sandstone finish.
KEP8ACSL-STN
8 gph chiller, manual push pad activation, stainless steel
KEP8ACSLEE-SND
8 gph chiller, manual push pad activation on upper unit and infrared
sensor activation on lower unit, sandstone finish.
033926-001
192
DRINKING
FOUNTAINS,
UNIVERSAL
033926-001
Drinking Fountains
Universal
VIEW / DRAWING
TYPE / MODEL
Split Level Drinking Fountain
Universal split level drinking fountain. Waterways are lead-free in materials
and construction. Drinking fountains have built-in 100 micron strainer
stops particles before they enter the waterway. Stainless Steel Top One
Piece, Low Flow, Flexible Tamper Proof Bubbler. Heavy Duty Galvanized
Steel Frame. Manual Activation. Unit will comply with wheelchair
accessibility when properly installed.
KEPACSL-SND
sandstone finish, unchilled
DRINKING
FOUNTAINS,
UNIVERSAL
033926-001
193
Drinking Fountains
Universal
TYPE / MODEL
Vandal resistant 14 gauge (2.0mm) stainless steel low flow drinking
fountain. Waterways are lead-free in materials and construction. Drinking
fountains have built-in 100 micron strainer stops particles before they
enter the waterway. Stainless Steel Top One Piece, Low Flow, Chrome
KEPGV8AC-14G
with 8 gph high efficiency chiller. Compressor is hermetically sealed,
reciprocating type, single phase, lifetime lubrication. The condenser is
cooled with a permanently lubricated fan motor. Stainless steel cooilng
tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altituted requirements) easily accessible by removal
of front panel. R134a refrigerant.
KEPVAC-14G
non-chilled
033926-001
Split Level, Vandal Resistant Heavy Duty Drinking Fountain
Vandal resistant 14 gauge (2.0mm) stainless steel low flow split level
drinking fountain. Waterways are lead-free in materials and construction.
Drinking fountains have built-in 100 micron strainer stops particles before
they enter the waterway. Stainless Steel Top One Piece, Low Flow, Chrome
KEPGV8ACSL-14G
with 8 gph high efficiency chiller. Compressor is hermetically sealed,
reciprocating type, single phase, lifetime lubrication. The condenser is
cooled with a permanently lubricated fan motor. Stainless steel cooilng
tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altituted requirements) easily accessible by removal
of front panel. R134a refrigerant.
KEPVACSL-14G
non-chilled
033926-001
194
DRINKING
FOUNTAINS,
UNIVERSAL
VIEW / DRAWING
Drinking Fountains
Sports bottle fillers
VIEW / DRAWING
TYPE / MODEL
Chilled Sports Bottle Filler
"EBF" version shown
Recessed chilled sports bottle filler. Deep alcove to accommodate for
larger diameter containers even if they have a small neck. Heavy duty
steel frame with brushed stainless steel panels. Built-in 100 micron
strainer stops particles before they enter the waterway. Unit will comply
with wheelchair accessibility when properly installed.
1 5/16" X 19 3/4" X 40 3/4"(33 X 502X 1035 mm)
KEMW12EBF-STN
12 gph chiller, sensor activated bottle filler with bottle counter
KEMW8SBF-STN
8 gph chiller, solenoid activated bottle filler
KEMW12SBF-STN
12 gph chiller, solenoid activated bottle filler
KEMW8EBF-STN
8 gph chiller, sensor activated bottle filler with bottle counter
033926-002
Chilled Sports Bottle Filler
DRINKING
FOUNTAINS,
BOTTLE FILLERS
Chilled sports bottle filler. Deep alcove to accommodate for larger
diameter containers even if they have a small neck. Heavy duty steel
frame with brushed stainless steel panels. Built-in 100 micron strainer
stops particles before they enter the waterway. Unit will comply with
wheelchair accessibility when properly installed. 0.5gpm (1.9 lpm) flow
rate. Deep alcove to accommodate for larger diameter containers even if
they have a small neck.
"EBF" version shown
5 5/16" x 20 5/16" x 41 1/4" (135 x 515 x 1048 mm)
KEMWSM12EBF-STN
12 gph chiller, surface mount, sensor activated bottle filler with bottle
counter
KEMWSM8EBF-STN
8 gph chiller, surface mount, sensor activated bottle filler with bottle counter
KEMWSM8SBF-STN
8 gph chiller, surface mount, solenoid activated bottle filler
KEMWSM12SBF-STN
12 gph chiller, surface mount, solenoid activated bottle filler
033926-002
195
Drinking Fountains
VIEW / DRAWING
TYPE / MODEL
Recessed Sports Bottle Filler
Recessed sports bottle filler. Deep alcove to accommodate for larger
diameter containers even if they have a small neck. Heavy duty steel
frame with brushed stainless steel panels. Built-in 100 micron strainer
stops particles before they enter the waterway. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Unit will
"EBF" version shown
1 5/16" x 19 3/4" x 40 3/4" (33 x 502 x 1035 mm)
KEMWEBF-STN
sensor actived bottle filler with bottle counter
KEMWSBF-STN
non-chilled, solenoid activated bottle filler
033926-002
"EBF" version shown
Surface mount sports bottle fillers are non-refrigerated units that deliver
ambient water. Deep alcove to accommodate for larger diameter
containers even if they have a small neck. Moulded components utilize a
silver-based antimicrobial compound that reduces the growth of microorganisms and mildew to protect the surfaces from discolouration, odours
and degradation. Built-in 100 micron strainer stops particles before they
enter the waterway. Waterways are lead-free in materials and construction. Heavy duty steel frame. Tailpiece is sized to accept either 1 1/2"
(38mm) or 1 1/4" (32mm) P-trap. P-Trap not included.
Listed by Underwriters' Laboratories to U.S. and Canadian standards.
5 5/16" x 20 5/16" x 41 1/4" (135 x 515 x 1048 mm)
KEMWSMEBF-STN
surface mounted, sensor activated bottle filler with bottle counter
KEMWSMSBF-STN
solenoid activated bottle filler, surface mount
033926-002
196
DRINKING
FOUNTAINS,
BOTTLE FILLERS
Sports Bottle Filler with Frame
Drinking Fountains
VIEW / DRAWING
TYPE / MODEL
Sensor Activated Bottle Filler with LCD Display
Surface mount sports bottle fillers are non-refrigerated units that
deliver ambient water. Deep alcove to accommodate for larger diameter
containers even if they have a small neck. Moulded components utilize
a silver-based antimicrobial compound that reduces the growth of
micro-organisms and mildew to protect the surfaces from discolouration, odours and degradation. Built-in 100 micron strainer stops particles
before they enter the waterway. Waterways are lead-free in materials
and construction. Heavy duty steel frame. Tailpiece is sized to accept
either 1 1/2" (38mm) or 1 1/4" (32mm) P-trap. P-Trap not included.
5 11/16" x 16 5/16" x 24 15/16" (144 x 414 x 633 mm)
KEPWSMEBF-STN
surface mount, sensor activated with bottle counter
Manually Activated Bottle Filler
DRINKING
FOUNTAINS,
BOTTLE FILLERS
Surface mount sports bottle fillers are non-refrigerated units that
deliver ambient water. Deep alcove to accommodate for larger diameter
containers even if they have a small neck. Moulded components utilize
a silver-based antimicrobial compound that reduces the growth of
micro-organisms and mildew to protect the surfaces from discolouration, odours and degradation. Built-in 100 micron strainer stops particles
before they enter the waterway. Waterways are lead-free in materials
and construction. Heavy duty steel frame. Tailpiece is sized to accept
either 1 1/2" (38mm) or 1 1/4" (32mm) P-trap. P-Trap not included.
5 11/16" x 16 5/16" x 24 15/16" (144 x 414 x 633 mm)
KEPWSMSBF-STN
surface mount, manually activated
197
Drinking Fountains
TYPE / MODEL
Sports Bottle Filler
The KEPWSBF sports bottle filler is designed to retrofit on existing KEPAC
family of coolers as well as existing competitors products. Deep alcove to
accommodate for larger diameter containers even if they have a small
neck. Cabinet finish is brushed stainless steel. Waterways are lead-free in
materials and construction. Unit is mechanically activated. Surface mount
frame assembly. Installation instructions included. 0.5gpm (1.9 lpm) flow
rate.
6 7/16" x 16 1/4" x 19 5/16" (163 x 413 x 490 mm)
KEPWSBF
mechanically activated bottle filler
Optional accessory
SRH-KEPWSBF
Gasket to retrofit Sunroc/Haws water fountain.
EKG-KEPWSBF
Gasket to retrofit Elkay water fountain.
Sports Bottle Filler with LCD Bottle Counter
The KEPWEBF sports bottle filler is designed to retrofit on existing KEPAC
family of coolers as well as existing competitors products. Deep alcove to
accommodate for larger diameter containers even if they have a small
neck. Cabinet finish is brushed stainless steel. Waterways are lead-free in
materials and construction. Key components utilize a silver-based
antimicrobial compound that reduces the growth of micro-organisms and
mildew to protect the surfaces from discoloration, odors and degradation.
Complete with bottle counter and system status indicator. If installed onto
a filtered water cooler, the status indicator can signal when filter changes
are recommended. With non-filtered coolers, this system status will
remain green. This retrofit is not meant to install on an electric eye cooler.
Units with optional glass fillers must have the glass filler disconnected
and removed.
Unit is sensor activated. Surface mount frame assembly. Installation
instructions included. 0.5gpm (1.9 lpm) flow rate.
6 7/16" X 16 1/4" X 19 5/16" (164 x 413 x 490 mm)
KEPWEBF
sensor activated bottle filler
198
DRINKING
FOUNTAINS,
BOTTLE FILLERS
VIEW / DRAWING
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
"EBF" version shown
Recessed sports bottle filler chilled drinking fountain combination. Deep
alcove to accommodate for larger diameter containers even if they have a
small neck. Heavy duty steel frame with brushed stainless steel panels.
Built-in 100 micron strainer stops particles before they enter the
waterway. Universal installation, sports bottle filler can be installed either
left or right. Deep alcove to accommodate for larger diameter containers
even if they have a small neck. Drinking fountain has a vandal resistant
push button and a low flow bubbler with flexible guard. Unit will comply
with wheelchair accessibility when properly installed. Sports bottle filler
has a 0.5gpm (1.9 lpm) flow rate.
18 1/4" x 39 1/2 x 40 3/4" (463 x 1003 x 1035 mm)
KEM8-EBF-STN
8 gph chiller, sensor activated sports bottle filler with bottle counter
KEM8-SBF-STN
8 gph chiller, manually activated sports bottle filler
KEM12-EBF-STN
12 gph chiller, sensor activated sports bottle filler with bottle counter
KEM12-SBF-STN
12 gph chiller, manually activated sports bottle filler
DRINKING
FOUNTAINS,
COMBINATIONS
033926-002
Optional filter kit (more details on page 206)
199
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
lifetime lubrication. The condenser is cooled with a permanently
lubricated fan motor. Stainless steel cooilng tank with continuous
copper tubing. Factory preset thermostat, (adjustable to compensate
for altituted requirements) easily accessible by removal of front panel.
R134a refrigerant.
18 9/16" x 18 1/2" x 37 13/16" (472 x 469 x 960 mm)
KEP8AC-EBF-STN
8 gph chiller, stainless steel cabinet, sensor activated sports bottle filler
with bottle counter
KEP8AC-EBF-SND
8 gph chiller, sandstone finish cabinet, sensor activated sports bottle
filler with bottle counter
KEP8AC-SBF-SND
KEP8AC-SBF-STN
033926-001
DRINKING
FOUNTAINS,
COMBINATIONS
"EBF" version shown
Combination chilled drinking fountain with sports bottle filler. Deep
alcove to accommodate for larger diameter containers even if they have
a small neck. Sports bottle filler cabinet finish is brushed stainless
steel. Waterways are lead-free in materials and construction. Drinking
fountain is mechanically activated. Surface mount frame assembly.
Units have built-in 100 micron strainer stops particles before they enter
the waterway. Stainless Steel Top One Piece, Low Flow, Flexible Bubbler
Guard. Heavy Duty Galvanized Steel Frame. Unit will comply with
wheelchair accessibility when properly installed.
200
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
KEPAC-SBF-SND shown
Combination sports bottle filler. Deep alcove to accommodate for larger
diameter containers even if they have a small neck. Sports bottle filler
cabinet finish is brushed stainless steel. Waterways are lead-free in
materials and construction. Drinking fountain is mechanically activated.
Surface mount frame assembly. Units have built-in 100 micron strainer
Piece, Low Flow, Flexible Bubbler Guard. Heavy Duty Galvanized Steel
Frame. Unit will comply with wheelchair accessibility when properly
installed.
Listed by Underwriters’ Laboratories to U.S. and Canadian standard
18 9/16" x 18 1/2" x 37 13/16" (472 x 469 x 960 mm)
KEPAC-EBF-SND
sandstone finish, sensor activated sports bottle filler with bottle counter
KEPAC-EBF-STN
stainless steel cabinet, sensor activated sports bottle filler with bottle
counter
KEPAC-SBF-SND
sandstone finish, manually activated bottle filler
KEPAC-SBF-STN
stainless steel, manually activated bottle filler
DRINKING
FOUNTAINS,
COMBINATIONS
033926-001
201
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
Chilled, Vandal Resistant Drinking Fountain
18 5/8" x 17 5/8" x 37 13/16" (472 x 448 x 960 mm)
KEPV8AC-EBF-STN
8 gph chiller, stainless steel cabinet, vandal resistant push buttons, sensor
activated sports bottle filler with bottle counter
KEPV8AC-SBF-STN
adjustment, stainless steel
033926-001
DRINKING
FOUNTAINS,
COMBINATIONS
KEPV8AC-EBF-STN shown
Combination chilled drinking fountain with sports bottle filler. Deep alcove
to accommodate for larger diameter containers even if they have a small
neck. Sports bottle filler cabinet finish is brushed stainless steel.
Waterways are lead-free in materials and construction. Drinking fountain
is mechanically activated. Surface mount frame assembly. Units have
built-in 100 micron strainer stops particles before they enter the
waterway. Stainless Steel Top One Piece, Low Flow, Flexible Bubbler
202
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
Non-Chilled, Vandal Resistant Drinking Fountain
KEPVAC-EBF-STN shown
Combination sports bottle filler. Deep alcove to accommodate for larger
diameter containers even if they have a small neck. Sports bottle filler
cabinet finish is brushed stainless steel. Waterways are lead-free in
materials and construction. Drinking fountain is mechanically activated.
Surface mount frame assembly. Units have built-in 100 micron strainer
Piece, Low Flow, Flexible Bubbler Guard. Heavy Duty Galvanized Steel
Frame. Unit will comply with wheelchair accessibility when properly
installed.
Listed by Underwriters’ Laboratories to U.S. and Canadian standard
18 5/8" x 17 5/8" x 37 13/16" (472 x 448 x 960 mm)
KEPVAC-EBF-STN
stainless steel cabinet, vandal resistant push buttons, sensor activated
sports bottle filler with bottle counter
DRINKING
FOUNTAINS,
COMBINATIONS
KEPVAC-SBF-STN
vandal resistant push button, no external stream height adjustment,
stainless steel, manually activated bottle filler.
033926-001
203
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
18 5/8" x 36 1/8" x 37 13/16" (472 x 917 x 960 mm)
KEP8ACSL-EBF-SND
8 gph chiller, sandstone finish, sensor activated sports bottle filler with
bottle counter
KEP8ACSL-EBF-STN
8 gph chiller, stainless steel cabinet, sensor activated sports bottle filler
with bottle counter
KEP8ACSL-SBF-SND
8 gph chiller, sandstone finish, manually activated sports bottle filler
KEP8ACSL-SBF-STN
033926-001
DRINKING
FOUNTAINS,
COMBINATIONS
KEP8ACSL-EBF-STN shown
Combination chilled split level drinking fountain with sports bottle filler.
Deep alcove to accommodate for larger diameter containers even if they
have a small neck. Sports bottle filler cabinet finish is brushed stainless
fountains are mechanically activated. Surface mount frame assembly.
204
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
KEPACSL-EBF-STN shown
Combination split level drinking fountain with sports bottle filler. Deep
alcove to accommodate for larger diameter containers even if they have a
small neck. Sports bottle filler cabinet finish is brushed stainless steel.
Waterways are lead-free in materials and construction. Unit is mechanically activated. Surface mount frame assembly. Units have built-in 100
micron strainer stops particles before they enter the waterway. Stainless
Steel Top One Piece, Low Flow, Flexible Bubbler Guard. Heavy Duty
Galvanized Steel Frame. Manual Activation. Unit will comply with
covered by this specification co mply with all known Plumbing Codes.
18 5/8" x 36 1/8" x 37 13/16" (472 x 917 x 960mm)
KEPACSL-EBF-STN
stainless steel cabinet, sensor activated sports bottle filler with bottle
counter
KEPACSL-EBF-SND
sandstone finish, sensor activated sports bottle filler with bottle counter
KEPACSL-SBF-SND
sandstone finish
KEPACSL-SBF-STN
stainless steel
033926-001
Chilled, Vandal Resistant Drinking Fountain
DRINKING
FOUNTAINS,
COMBINATIONS
KEPV8ACSL-EBF-STN shown
Combination chilled split level drinking fountain with sports bottle filler.
Deep alcove to accommodate for larger diameter containers even if they
have a small neck. Sports bottle filler cabinet finish is brushed stainless
fountains are mechanically activated. Surface mount frame assembly.
18 5/8" 35 1/4" X 37 13/16" (472 x 896 x 960 mm)
KEPV8ACSL-EBF-STN
8 gph chiller, stainless steel cabinet, vandal resistant push buttons, sensor
activated sports bottle filler with bottle counter
KEPV8ACSL-SBF-STN
8 gph chiller, vandal resistant push buttons, no external stream height
adjustment, stainless steel.
033926-001
205
Drinking Fountains
Combinations
VIEW / DRAWING
TYPE / MODEL
Non-Chilled, Vandal Resistant Drinking Fountain
Universal split level drinking fountain. Deep alcove to accommodate for
larger diameter containers even if they have a small neck. Waterways are
lead-free in materials and construction. Drinking fountains have built-in
100 micron strainer stops particles before they enter the waterway.
Stainless Steel Top One Piece, Low Flow, Flexible Tamper Proof Bubbler.
Heavy Duty Galvanized Steel Frame. Manual Activation. Unit will comply
with wheelchair accessibility when properly installed.
KEPVACSL-EBF-STN shown
18 5/8" 35 1/4" X 37 13/16" (472 x 896 x 960 mm)
KEPVACSL-EBF-STN
stainless steel cabinet, vandal resistant push buttons, no external stream
height adjustment, stainless steel, sensor activated sports bottle filler with
bottle counter
KEPVACSL-SBF-STN
vandal resistant push buttons, no external stream height adjustment,
stainless steel
033926-001
Optional filter kit (more details below)
Optional Filter Kit
The VersaFilter filteration system can be retro fitted to a variety of drinking
fountains. Both kits include brackets, complete VersaFilter, and colour
coded water line connections.
KEPAC series
#033926-001
UNIVERSAL kit
#033926-002
Tested and certified by NSF International to comply with NSF 42 and 53
standards.
- Reduces chlorine by 97% (ANSI/NSF 42)
- Reduces lead between 95.9% and 99% (ANSI/NSF 53)
- Reduces cryptosporidium and giardia cysts by 99.99% (ANSI/NSF 53)
033926-001
Optional filter kit for KEPAC series
(Chilled and Non-Chilled)
033926-002
Optional UNIVERSAL filter kit
(Chilled and Non-Chilled)
206
DRINKING
FOUNTAINS,
COMBINATIONS
VersaFilter is easily accessible from inside the cooler for fast and easy
filter changes. An automatic shut-off inside the filter eliminates the need
to locate the water valve. Durable constructed, VersaFilter is designed to
last 1,250 gallons or approximately five months.
Drinking Fountains
Chillers
VIEW / DRAWING
TYPE / MODEL
Remote Chiller
1 gph remote chiller. Powder coated galvanized steel cabinet with plastic
front. Chiller is air cooled and is designed to fit under a sink. Stainless
steel storage tank and water ways. Water lines are welded to eliminate
corrosion and assure leakproof operation. Four foot (4') insulated power
cord with NEMA 5-15 plug. 1/4" OD stainless steel water tube connections.
8 13/16" x 10 1/2" x 14 11/16" (224 x 266 x 374 mm)
KER1P
1 gph remote chiller
Remote Chiller
Galvanized steel cabinet. Chiller is air cooled and is designed for remote
installation. Stainless steel storage tank. May be used to supply up to two
drinking fountains. 1/4" OD stainless steel water tube connections.
Factory preset thermostat, (adjustable to compensate for altituted requirements). R134a refrigerant.
DRINKING
FOUNTAINS,
CHILLERS
16 5/8" x 8 1/4" x 16 1/4" (422 x 209x 413 mm)
KER5
5 gph commercial grade chiller
10 3/8" x 16 3/8" x 16 9/16" (264 x 417 x 421 mm)
KER5
KER8 KER12
KER8
KER12
207
Quick Find Guide
PAGE
1
100...................................................................................................19
100-1/302.......................................................................................19
100-NR............................................................................................19
1047.................................................................................................19
1120/316.........................................................................................19
1130.................................................................................................19
1130/60...........................................................................................19
1200/316G......................................................................................19
125GOWK....................................................................................... 20
125GWK......................................................................................... 20
125GWK-MOD................................................................................ 20
1300G..............................................................................................19
2
200/316...........................................................................................19
200/316-NR....................................................................................19
3
310-1............................................................................................... 20
312-1............................................................................................... 20
315-7............................................................................................... 20
315-8............................................................................................... 20
315-9............................................................................................... 20
315-9/316....................................................................................... 20
3000T3370A.................................................................................. 79
3001T3370A................................................................................... 79
033926-001................................................................................. 206
033926-002................................................................................. 206
A
ACG-48..........................................................................................137
AHDSB1918-FM............................................................................157
AHDSB1918-RM............................................................................156
ALBD1305P-1................................................................................. 30
ALBD1306P-1................................................................................. 30
ALBD4405P-1................................................................................ 30
ALBD4406P-1................................................................................ 30
ALBD6405-1................................................................................... 29
ALBD6405P-1................................................................................. 30
ALBD6406P-1................................................................................. 30
ALBD7505P-1................................................................................. 30
ALBD7506P-1................................................................................. 30
ALBDC182605P-1.......................................................................... 30
ALBLRS7005P-1............................................................................. 40
ALBLRS7006P-1............................................................................. 40
ALBLS4605P-1............................................................................... 38
ALBLS4606P-1............................................................................... 38
ALBLS6406P-1............................................................................... 38
ALBLS7005P-1............................................................................... 38
ALBLS7006P-1............................................................................... 38
ALBRS4605P-1.............................................................................. 39
ALBRS4606P-1............................................................................... 39
ALBRS7005P-1............................................................................... 39
ALBRS7006P-1............................................................................... 39
ALBS1305P-1................................................................................. 25
ALBS1306P-1................................................................................. 25
ALBS2705P-1................................................................................. 25
ALBS2706P-1................................................................................. 25
ALBS4005P-1................................................................................. 26
ALBS4006P-1................................................................................. 26
ALBS4405P-1................................................................................. 25
ALBS4406P-1................................................................................. 25
ALBS4605P-1................................................................................. 25
ALBS4606P-1................................................................................. 25
ALBS6105P-1................................................................................. 26
MODEL
PAGE
ALBS6106P-1................................................................................. 26
ALBS6405-1................................................................................... 24
ALBS6405P-1................................................................................. 26
ALBS6406P-1................................................................................. 26
ALBS6805-1................................................................................... 24
ALBS6805/316P-1........................................................................114
ALBS6805P-1................................................................................. 26
ALBS6806P-1................................................................................. 26
ALBS7005P-1................................................................................. 26
ALBS7006P-1................................................................................. 26
ALBS7305P-1................................................................................. 26
ALBS7306P-1................................................................................. 26
ALBS7505P-1................................................................................. 26
ALBS7506P-1................................................................................. 26
ALBS7805P-1................................................................................. 26
ALBS7806P-1................................................................................. 26
ALBS9405P-1................................................................................. 25
ALBS9406P-1................................................................................. 25
ALHS4605P-1..................................................................................41
ALHS4606P-1..................................................................................41
ALHS6405P-1..................................................................................41
ALHS6406P-1..................................................................................41
ALHS7305P-1..................................................................................41
ALHS7306P-1..................................................................................41
ALHS8605P-1..................................................................................41
ALHS8606P-1..................................................................................41
ALRS4605P-1................................................................................. 42
ALRS4606P-1................................................................................. 42
ART36-1.......................................................................................... 44
ART36-3C....................................................................................... 44
ART36/316-1.................................................................................120
ART36/316-3C..............................................................................120
ART48-1.......................................................................................... 44
ART48-3C....................................................................................... 44
ART48/316-1.................................................................................120
ART48/316-3C..............................................................................120
ART60-1.......................................................................................... 44
ART60-3C....................................................................................... 44
ART60/316-1.................................................................................120
ART60/316-3C..............................................................................120
AS6105P-1...................................................................................... 23
AWHB1414P-00............................................................................. 81
C
C621T.............................................................................................. 79
CH-01............................................................................................ 134
CH-02............................................................................................ 134
CHRX670...................................................................................... 144
CL-DB.............................................................................................. 63
CM-16104......................................................................................136
CMPX538...................................................................................... 130
CR-36............................................................................................ 134
CR-48............................................................................................ 134
CR-60............................................................................................ 134
CR-72............................................................................................ 134
CV-00............................................................................................ 134
CV-01............................................................................................ 134
CV-02............................................................................................ 134
D
D0814P-1........................................................................................ 28
D1906-1.......................................................................................... 28
D6408-1.......................................................................................... 28
D6410/316PCB-1..........................................................................118
D6410PCB-1................................................................................... 28
D8610-1.......................................................................................... 28
Franke Commercial Systems Product Catalogue 208
QUICK FIND
GUIDE
MODEL
Quick Find Guide
MODEL
PAGE
DL2448-1....................................................................................... 62
DL2448-5....................................................................................... 62
E
EKG-KEPWSBF..............................................................................198
E-XINX606.................................................................................... 145
E-XINX608.................................................................................... 145
F
F850-1824.................................................................................... 148
F850-1830.................................................................................... 148
F850-1836.................................................................................... 148
F850-2430................................................................................... 148
F850-2436................................................................................... 148
F3200-1824...................................................................................149
F3200-1830...................................................................................149
F3200-1836...................................................................................149
F3200-2430..................................................................................149
F3200-2436..................................................................................149
F3200FT-1630.............................................................................. 150
F3200FT-1830.............................................................................. 150
F3200FT-1836.............................................................................. 150
F3200FT-2436............................................................................. 150
F3300-1824.................................................................................. 164
F3300-1830.................................................................................. 164
F3300-2436................................................................................. 164
FSS2210/316-1............................................................................ 103
FSS222210/316-1........................................................................ 102
FSSL223410/316-1..................................................................... 104
FSSO2210/316-1......................................................................... 103
FSSOL223410/316-1................................................................... 102
FSSOR223410/316-1.................................................................. 105
FSSR223410/316-1..................................................................... 104
FWHB1819-3.................................................................................. 94
H
QUICK FIND
GUIDE
HDCU1318C..................................................................................152
HDCU1318L...................................................................................152
HDCU1318R...................................................................................152
HDFSS1821-RM............................................................................158
HDFSS2021-FM............................................................................160
HDPWB1518................................................................................. 154
HDSB1318-RM............................................................................. 154
HDSB1418-FM...............................................................................155
HDSP2408-RM..............................................................................163
HDSP2412-FM...............................................................................163
HDU1314-RM............................................................................... 153
HDWC2414-FM-R..........................................................................131
HDWC2414-RM............................................................................ 153
HDWC2514-FM-T..........................................................................131
HDWSS1821-RM...........................................................................159
HDWSS2021-FM...........................................................................161
HWS0610P-3.................................................................................. 86
HWS1414P-00................................................................................ 82
HWS1420P-00............................................................................... 83
HWS1518P-00................................................................................ 84
HWS6810P-3.................................................................................. 87
HWSS1518P-00............................................................................. 85
K
KEF100-STN..................................................................................181
KEF110PM-STN............................................................................ 183
KEF120-STN................................................................................. 183
KEF140PM-STN........................................................................... 183
KEM8CR-STN................................................................................189
KEM8-EBF-STN.............................................................................199
KEM8SBEE-STN............................................................................185
209
MODEL
PAGE
KEM8-SBF-STN.............................................................................199
KEM8SBPM-STN...........................................................................185
KEM8SCEE-STN............................................................................186
KEM8SCPM-STN...........................................................................186
KEM8WREE-STN...........................................................................187
KEM8WR-STN...............................................................................187
KEM12-EBF-STN...........................................................................199
KEM12-SBF-STN...........................................................................199
KEM110PM-STN............................................................................186
KEM140PM-STN...........................................................................185
KEM140R-STN............................................................................. 188
KEML110R-STN............................................................................ 188
KEMMRSLEE-STN.........................................................................189
KEMMRSL-STN.............................................................................189
KEMSSLPM-STN...........................................................................187
KEMW8EBF-STN...........................................................................195
KEMW8SBF-STN...........................................................................195
KEMW12EBF-STN.........................................................................195
KEMW12SBF-STN.........................................................................195
KEMWEBF-STN.............................................................................196
KEMWSBF-STN.............................................................................196
KEMWSM8EBF-STN.....................................................................195
KEMWSM8SBF-STN.....................................................................195
KEMWSM12EBF-STN....................................................................195
KEMWSM12SBF-STN...................................................................195
KEMWSMEBF-STN........................................................................196
KEMWSMSBF-STN.......................................................................196
KEP3CP-SND................................................................................ 180
KEP3CP-STN................................................................................ 180
KEP5CP-SND................................................................................ 180
KEP5CP-STN................................................................................ 180
KEP8AC-EBF-SND........................................................................ 200
KEP8AC-EBF-STN........................................................................ 200
KEP8ACEE-SND............................................................................191
KEP8AC-SBF-SND....................................................................... 200
KEP8AC-SBF-STN........................................................................ 200
KEP8ACSL-EBF-SND................................................................... 204
KEP8ACSL-EBF-STN.................................................................... 204
KEP8ACSLEE-SND........................................................................192
KEP8ACSL-SBF-SND................................................................... 204
KEP8ACSL-SBF-STN.................................................................... 204
KEP8ACSL-SND............................................................................192
KEP8ACSL-STN.............................................................................192
KEP8AC-SND.................................................................................190
KEP8AC-STN.................................................................................190
KEP8FA-SND................................................................................ 180
KEP8FA-STN................................................................................ 180
KEP8M-SND................................................................................. 184
KEP8M-STN.................................................................................. 184
KEP10CP-SND.............................................................................. 180
KEP10CP-STN.............................................................................. 180
KEP16FAWHDCP-STN..................................................................182
KEPAC-EBF-SND.......................................................................... 201
KEPAC-EBF-STN........................................................................... 201
KEPAC-SBF-SND.......................................................................... 201
KEPAC-SBF-STN.......................................................................... 201
KEPACSL-EBF-SND...................................................................... 205
KEPACSL-EBF-STN...................................................................... 205
KEPACSL-SBF-SND...................................................................... 205
KEPACSL-SBF-STN...................................................................... 205
KEPACSL-SND...............................................................................193
KEPAC-SND...................................................................................190
KEPAC-STN...................................................................................190
KEPCM-SND................................................................................. 184
KEPCM-STN................................................................................. 184
KEPGAC-STN.................................................................................190
KEPGV8AC-14G.............................................................................162
Quick Find Guide
PAGE
KEPGV8AC-14G.............................................................................194
KEPGV8ACSL-14G........................................................................162
KEPGV8ACSL-14G........................................................................194
KEPLF4CM-SND...........................................................................181
KEPLF4CM-STN............................................................................181
KEPLF16FAW-SND........................................................................182
KEPLF20FACP-STN.......................................................................182
KEPV8AC-EBF-STN...................................................................... 202
KEPV8AC-SBF-STN...................................................................... 202
KEPV8ACSL-EBF-STN................................................................. 205
KEPV8ACSL-SBF-STN................................................................. 205
KEPV8ACSL-STN..........................................................................192
KEPV8AC-STN...............................................................................191
KEPVAC-14G..................................................................................162
KEPVAC-14G..................................................................................194
KEPVAC-EBF-STN........................................................................ 203
KEPVAC-SBF-STN........................................................................ 203
KEPVACSL-14G.............................................................................162
KEPVACSL-14G.............................................................................194
KEPVACSL-EBF-STN.................................................................... 206
KEPVACSL-SBF-STN.................................................................... 206
KEPWEBF......................................................................................198
KEPWSBF......................................................................................198
KEPWSMEBF-STN.........................................................................197
KEPWSMSBF-STN........................................................................197
KER1P........................................................................................... 207
KER5............................................................................................. 207
KER8............................................................................................. 207
KER12........................................................................................... 207
L
LBD0814P-1................................................................................... 30
LBD1308P-1................................................................................... 30
LBD4408P-1................................................................................... 30
LBD4410P-1................................................................................... 30
LBD6407-1...................................................................................... 29
LBD6407/316P-1..........................................................................119
LBD6408-1..................................................................................... 29
LBD6408/316P-1..........................................................................119
LBD6408P-1................................................................................... 30
LBD6410/316PCB-1.....................................................................119
LBD6410PCB-1.............................................................................. 30
LBD6808-1..................................................................................... 29
LBD7412P-1.................................................................................... 30
LBD7508-1..................................................................................... 29
LBD7508P-1................................................................................... 30
LBD7510P-1.................................................................................... 30
LBDDBL6408P-1............................................................................ 60
LBDDBR6408P-1............................................................................ 60
LBLRS7008P-1............................................................................... 40
LBLS4608P-1................................................................................. 38
LBLS6408P-1................................................................................. 38
LBLS7008P-1................................................................................. 38
LBRS4608P-1................................................................................. 39
LBRS7008P-1................................................................................. 39
LBS1306-1...................................................................................... 24
LBS1308P-1.................................................................................... 25
LBS2708-1...................................................................................... 24
LBS2708P-1................................................................................... 25
LBS4008P-1................................................................................... 26
LBS4010P-1.................................................................................... 26
LBS4408P-1................................................................................... 25
LBS4410P-1.................................................................................... 25
LBS4607-1...................................................................................... 24
LBS4607/316P-1..........................................................................114
LBS4607/316P-3..........................................................................114
LBS4608P-1................................................................................... 25
MODEL
PAGE
LBS4610/316P-1...........................................................................115
LBS4610/316PC-3........................................................................115
LBS4610P-1.................................................................................... 25
LBS6108P-1.................................................................................... 26
LBS6110P-1.................................................................................... 26
LBS6407/316P-1..........................................................................114
LBS6408P-1................................................................................... 26
LBS6410PCB-1............................................................................... 26
LBS6807-1...................................................................................... 24
LBS6807-2...................................................................................... 24
LBS6807/316P-1...........................................................................114
LBS6808-1..................................................................................... 24
LBS6808-2..................................................................................... 24
LBS6808/316P-1..........................................................................114
LBS6808P-1................................................................................... 26
LBS6810-1...................................................................................... 24
LBS6810/316P-1...........................................................................114
LBS6810/316P-3..........................................................................114
LBS6810P-1.................................................................................... 26
LBS7008P-1................................................................................... 26
LBS7010P-1.................................................................................... 26
LBS7308-1...................................................................................... 24
LBS7308P-1................................................................................... 26
LBS7310P-1.................................................................................... 26
LBS7312P-1.................................................................................... 26
LBS7314P-1.................................................................................... 26
LBS7508-1...................................................................................... 24
LBS7508P-1.................................................................................... 26
LBS7510P-1.................................................................................... 26
LBS7808P-1................................................................................... 26
LBS8014P-1.................................................................................... 26
LBS9106-1...................................................................................... 24
LBS9106-3...................................................................................... 24
LBS9407-1...................................................................................... 24
LBS9407-3...................................................................................... 24
LBS9407/316P-1...........................................................................114
LBS9407/316P-3..........................................................................114
LBS9408P-1................................................................................... 25
LBSDBL6408P-1............................................................................ 58
LBSDBL6810/316P-1....................................................................121
LBSDBL6810P-1............................................................................. 59
LBSDBR6408P-1............................................................................ 58
LBSDBR6810/316P-1...................................................................121
LBSDBR6810P-1............................................................................ 59
LBT6407CB-1................................................................................. 33
LBT6410PCB-1............................................................................... 33
LBT8607-1...................................................................................... 34
LBT8610P-1.................................................................................... 34
LHS4608P-1....................................................................................41
LHS6408P-1....................................................................................41
LHS7308P-1....................................................................................41
LHS8608P-1....................................................................................41
LRS4608P-1................................................................................... 42
O
OC6/316........................................................................................122
OF100............................................................................................. 20
OF100............................................................................................. 20
OF100-VAN..................................................................................... 20
OF100-VAN..................................................................................... 20
OV17/5.............................................................................................51
OV17/6.............................................................................................51
OV18SR/6...................................................................................... 56
OV18SR/7...................................................................................... 56
OV19/5............................................................................................51
OV1317U/5..................................................................................... 53
OV1418/6....................................................................................... 50
QUICK FIND
GUIDE
MODEL
Quick Find Guide
Quick Find Guide
MODEL
PAGE
OV1420U/5.................................................................................... 54
OV1619/5....................................................................................... 52
OV1619/6........................................................................................ 52
OV1821/5....................................................................................... 52
OV1821/6....................................................................................... 52
OWB1119U/5.................................................................................. 55
OWB1420U/5................................................................................. 55
Q
QC-1W-18P....................................................................................136
QC-1W-24P....................................................................................136
QC-1W-30P....................................................................................136
QC-1W-36P....................................................................................136
QC-1W-3030P...............................................................................137
QC-2W-2436P...............................................................................136
QC-2W-3030P...............................................................................136
QUICK FIND
GUIDE
R
R2570-MIXLF................................................................................. 79
RC5/316........................................................................................122
RC6/316........................................................................................123
RDL2436-1..................................................................................... 68
RDL2436L-1................................................................................... 68
RDL2436LR-1................................................................................. 68
RDL2436R-1................................................................................... 68
RDL2448-1..................................................................................... 68
RDL2448L-1................................................................................... 68
RDL2448LR-1................................................................................. 68
RDL2448R-1................................................................................... 68
RODX600...................................................................................... 138
RODX600E.....................................................................................139
RODX600ME.................................................................................139
RODX602.......................................................................................147
RODX602E.....................................................................................147
RODX605...................................................................................... 146
RODX605E.................................................................................... 146
RODX611....................................................................................... 145
RODX618.......................................................................................141
RODX618E.....................................................................................142
RODX619.......................................................................................142
RODX619E.....................................................................................142
RODX625.......................................................................................141
RODX630...................................................................................... 138
RODX672...................................................................................... 143
RODX672E.................................................................................... 143
RS14...............................................................................................110
RSL2418-1.......................................................................................67
RSL2418L-1.....................................................................................67
RSL2418LR-1...................................................................................67
RSL2418R-1.....................................................................................67
RSL2424-1.......................................................................................67
RSL2424L-1.....................................................................................67
RSL2424LR-1..................................................................................67
RSL2424R-1....................................................................................67
RTL2454-1...................................................................................... 69
RTL2454L-1.................................................................................... 69
RTL2454LR-1................................................................................. 69
RTL2454R-1................................................................................... 69
RTL2472-1...................................................................................... 69
RTL2472L-1.................................................................................... 69
RTL2472LR-1.................................................................................. 69
RTL2472R-1.................................................................................... 69
S
S4206-1.......................................................................................... 22
S6108P-1........................................................................................ 23
S6407/316P-1...............................................................................112
211
MODEL
PAGE
S6407/316P-3...............................................................................112
S6408-1.......................................................................................... 22
S6410/316PCB-1..........................................................................113
S6410PCB-1................................................................................... 23
S6808-1.......................................................................................... 22
S6808/316P-1...............................................................................112
S6810-1.......................................................................................... 22
S6810/316P-1...............................................................................112
S6810/316P-3...............................................................................112
S7308-1.......................................................................................... 22
S7310P-1........................................................................................ 23
S7312P-1........................................................................................ 23
S7312P-2........................................................................................ 23
S7314P-1........................................................................................ 23
S8014P-1........................................................................................ 23
S9106-1.......................................................................................... 22
S9106-3.......................................................................................... 22
S9106/316P-1...............................................................................112
S9106/316P-3...............................................................................112
S9407-1.......................................................................................... 22
S9407/316P-1...............................................................................112
S9407/316P-3...............................................................................112
SC1-RM......................................................................................... 164
SD80V........................................................................................... 140
SD80V-EXT................................................................................... 140
SDL2436-1..................................................................................... 65
SDL2436L-1................................................................................... 65
SDL2436LR-1................................................................................. 65
SDL2436R-1................................................................................... 65
SDL2448-1..................................................................................... 65
SDL2448-L..................................................................................... 65
SDL2448LR-1................................................................................. 65
SDL2448-R..................................................................................... 65
SL2424-1........................................................................................ 62
SL2424-5........................................................................................ 62
SL2424/316-1...............................................................................127
SL2424/316-5..............................................................................127
SL2448-1........................................................................................ 62
SL2448-5....................................................................................... 62
SL2448/316-1...............................................................................127
SL2448/316-5..............................................................................127
SRH-KEPWSBF..............................................................................198
SS9126..........................................................................................110
SSL2418-1...................................................................................... 64
SSL2418L-1.................................................................................... 64
SSL2418LR-1.................................................................................. 64
SSL2418R-1.................................................................................... 64
SSL2424-1...................................................................................... 64
SSL2424L-1.................................................................................... 64
SSL2424LR-1................................................................................. 64
SSL2424R-1................................................................................... 64
SSS1827....................................................................................... 106
SSS1827DDS................................................................................ 108
SSS1827SDSL...............................................................................107
SSS1827SDSR...............................................................................107
SSU1-00..........................................................................................76
SSU1-10...........................................................................................76
SSU1-11...........................................................................................76
SSU1-20...........................................................................................76
SSU1-2016-00.................................................................................74
SSU1-2020-00................................................................................74
SSU2-00......................................................................................... 77
SSU2-10.......................................................................................... 77
SSU2-11.......................................................................................... 77
SSU2-20.......................................................................................... 77
SSU2-2040-00............................................................................... 75
SSU3-00......................................................................................... 78
Quick Find Guide
PAGE
SSU3-10.......................................................................................... 78
SSU3-11.......................................................................................... 78
SSU3-20......................................................................................... 78
SSU-BS........................................................................................... 80
STL2454-1...................................................................................... 66
STL2454L-1.................................................................................... 66
STL2454LR-1................................................................................. 66
STL2454R-1.................................................................................... 66
STL2472-1...................................................................................... 66
STL2472L-1.................................................................................... 66
STL2472LR-1.................................................................................. 66
STL2472R-1.................................................................................... 66
STRX692........................................................................................135
STRX694........................................................................................135
T
T6410PCB-1.................................................................................... 32
T8610-1........................................................................................... 32
TL2454-1........................................................................................ 63
TL2454-5........................................................................................ 63
TL2472-1......................................................................................... 63
TL2472-5........................................................................................ 63
U
UCD6405P-1...................................................................................47
UCD6408P-1...................................................................................47
UCS4608/316P-1......................................................................... 117
UCS4610/316P-1.......................................................................... 117
UCS6805P-1................................................................................... 46
UCS6808/316P-1.........................................................................116
UCS6808P-1................................................................................... 46
UCS6810/316P-1..........................................................................116
V
V17/5...............................................................................................51
V17/5D.............................................................................................51
V17/6...............................................................................................51
V19/5...............................................................................................51
V19/5D............................................................................................51
V19/6...............................................................................................51
V1114/5.......................................................................................... 50
V1114/5D........................................................................................ 50
V1418/5.......................................................................................... 50
V1418/5D....................................................................................... 50
V1418/6.......................................................................................... 50
V1619/5.......................................................................................... 52
V1619/6.......................................................................................... 52
V1821/5.......................................................................................... 52
V1821/6.......................................................................................... 52
W
WB1119U/5.................................................................................... 55
WB1420U/5................................................................................... 55
WDL2436-1.................................................................................... 71
WDL2436L-1.................................................................................. 71
WDL2436LR-1................................................................................ 71
WDL2436R-1.................................................................................. 71
WDL2448-1.................................................................................... 71
WDL2448L-1.................................................................................. 71
WDL2448LR-1................................................................................ 71
WDL2448R-1.................................................................................. 71
WHB1616-3.................................................................................... 90
WHB1617-3..................................................................................... 91
WHB1617-6..................................................................................... 91
WHB1617-7..................................................................................... 91
WHB1617⁄316-3............................................................................124
WHB1819-3.................................................................................... 93
MODEL
PAGE
WHB1819-6.................................................................................... 93
WHB1819-7.................................................................................... 93
WHB1819/316-3...........................................................................124
WHB2221-7.................................................................................... 99
WHB2221-8.................................................................................... 99
WHB2221-RS.................................................................................. 99
WHB2221-UC................................................................................. 99
WHB5222-7.................................................................................. 100
WHBS161709-3.............................................................................. 92
WHBS161709-7.............................................................................. 92
WHBS161709/316-3.....................................................................125
WHBS161709/316-7.....................................................................125
WHBS181910-3.............................................................................. 94
WHBS181910/316-3.....................................................................126
WSL2418-1..................................................................................... 70
WSL2418L-1................................................................................... 70
WSL2418LR-1................................................................................. 70
WSL2418R-1................................................................................... 70
WSL2424-1.................................................................................... 70
WSL2424L-1................................................................................... 70
WSL2424LR-1................................................................................ 70
WSL2424R-1.................................................................................. 70
WSS6713........................................................................................ 95
WT310E-7....................................................................................... 96
WT400C-7...................................................................................... 96
WT400C-8...................................................................................... 96
WT500C-7.......................................................................................97
WT500C-8.......................................................................................97
WT600C-7.......................................................................................97
WT600C-8.......................................................................................97
WTL2454-1.................................................................................... 72
WTL2454L-1................................................................................... 72
WTL2454LR-1................................................................................ 72
WTL2454R-1.................................................................................. 72
WTL2472-1..................................................................................... 72
WTL2472L-1................................................................................... 72
WTL2472LR-1................................................................................ 72
WTL2472R-1.................................................................................. 72
WT-RS............................................................................................. 98
WTS36-1....................................................................................... 109
WTS48-1....................................................................................... 109
WTS60-1....................................................................................... 109
WTS72-1....................................................................................... 109
WTS2025-1................................................................................... 109
WTS2031-1................................................................................... 109
WTS2036-1.................................................................................. 109
WTS2048-1.................................................................................. 109
WTS2060-1.................................................................................. 109
WTS2072-1................................................................................... 109
WTS2096-1.................................................................................. 109
X
XINX600....................................................................................... 138
XINX605....................................................................................... 146
XINX606....................................................................................... 145
XINX608....................................................................................... 145
XINX616.........................................................................................141
XINX617.........................................................................................141
XINX625........................................................................................142
XINX672....................................................................................... 143
XINX677....................................................................................... 143
■
QUICK FIND
GUIDE
MODEL
Franke Kindred Canada Ltd.
Commercial Systems
1000 Franke Kindred Road
Midland, ON L4R 4K9
Tel855-446-5663
Fax866-227-3050
ws-info.ca@franke.com
www.franke-commercial.com
Changes in dimensions,
construction and models
reserved.
Printed in Canada.
Effective March 1, 2015
through 2016
#61560
0315

Franke Commercial Catalogue low resolution(16.41 MB, PDF)

Transcription

Similar documents

kik-step®

Stainless Steel Kitchen Sinks

ZIMA 126-CS-Fabrication.indd

ISE Spec Sheet-Contractor 333 - InSinkErator

2005 Haulmark This Motorhome is amazing as the pictures will

Your enquiries are always welcome. STAINLESS OUTFITTERS 161

bis tristar - LUCKINSlive

Teppanyaki Griddles - Royal Range Of California, Inc.

Barrier-Free Dual Height Wall Mounted Drinking Fountain DF-3701

Chicago Products