guide resource - Amazon Web Services

Transcription

2014
GUIDE
RESOURCE
1
WHY BELGARD?
SERV I CE
Ease of doing business with Belgard.
Unparalleled service is the mandate of our Belgard sales team. Therefore, we strive to go
beyond traditional service options to supply our customers with industry leading resources,
offering a wealth of sales, design and technical resources, plus on-going continuing
education opportunities.
From our same-as-cash homeowner financing options to our Belgard Design Studio 3D
renderings and annual Belgard University classes, we supply you with the resources needed
to succeed.
PEOPLE
The best in the business.
We are committed to providing our customers with the most qualified and experienced leaders
in the industry, including engineers, designers and contractors.
From our knowledgeable and committed local representatives to our national team of
hardscape experts, our objective is to assist you with your outdoor living projects and sitespecific problems.
2
P RO D U C T
Innovation & Quality Guaranteed.
Beauty, functionality and quality are hallmarks of the Belgard Hardscapes brand and
this extends to every product we offer. We are committed to being the industry leader for
hardscapes innovation and site solutions.
As part of this commitment, we have a North American Research and Development Center
focused on developing products to enrich both our residential and commercial offerings
based on the expressed needs and wants of design professionals. And all of our products are
backed by our lifetime, transferable warranty.
B RA N D
The Nation’s Premier Brand.
We are proud to be America’s premier hardscape brand and continue to support a robust
marketing plan to grow brand awareness and loyalty. We annually partner with nationally
recognized publications and media to increase demand for Belgard as well as hardscapes
in general.
PA S SI ON
We Set the Bar.
Simply put, we love what we do and we love the customers we serve. Since 1995, Belgard has
set the standard for innovative outdoor solutions with premium interlocking concrete pavers
and segmental retaining walls, and we plan to continue to set the standard for years to come.
3
customer warranty
...............................................................................................................................................
belgard is proud to inform you that all of our interlocking concrete pavers and retaining
walls meet and exceed the requirements of astm c-936 and astm c-1372. belgard guarantees
its products against manufacturing defects for as long as you own your home. this warranty
is transferable. it is recommended that a belgard authorized contractor who guarantees
their workmanship for 2 years install all of the hardscapes products. the guarantee does
not apply to splitting, chipping or other breakage that could be caused by impact, abrasion
or overloading. this warranty is only valid if the material is installed under the guidelines
of the icpi (www.icpi.org), the ncma (www.ncma.org) or the belgard installation guideline manual.
this warranty is for residential construction only and does not imply a warranty for
commercial applications. belgard’s obligation is limited to the supplying of new material at
no charge. belgard will not be responsible for any replacement labor. belgard will honor
this warranty with the original proof of purchase. color matching cannot be guaranteed.
...............................................................................................................................................
4
TABL E of C ONTENTS
EASY REFERENCE....................06
PAVERS
Anchor Cobble ..............................12
Classico Pallet III......................... 14 Country Manor® Paving Stone...... 16
Dublin Cobble®............................ 18
Holland Stone.............................. 20
Lafitt™ Paver............................... 22
Lafitt™ Grana Slab.......................24
Lafitt™ Rustic Slab...................... 26
London Cobble™........................... 28
Mega-Arbel® Patio Slab...............30
Mega Bergerac®........................... 32
Mega-Lafitt™ ...............................34
Mega-Old World Paver™............... 36
Old World Paver™......................... 38
Urbana® Stone.............................40
PERMEABLE PAVERS
Aqua-Roc™ II................................44
Eco-Dublin®.................................46
Turfstone™...................................48
WALLS
Anchor Aspen Stone®.....................52
Anchor Diamond® 9D.................... 54
Anchor Diamond Pro ....................58
Anchor Diamond Pro Stone Cut®... 68
Anchor Vertica®.............................78
Anchor Vertica Pro®.......................88
Antique Quarry™........................... 98
Belair Wall®................................ 100
®
WALLS (Continued)
Celtik® Wall.................................102
Celtik® Wall Double Sided ..........104
Celtik® Wall Pier Kit .................. 106
Keystone® Country Manor® Wall..108
Keystone® Compac & Standard... 110
Keystone® Victorian......................112
Weston Stone® Universal............. 114
COPING, EDGERS & STEPS
Aquastyl®.....................................118
Bullnose 6” Paver.........................119
Anglia Edger®............................ 120
Country Manor® Curb Stone........122
BELGARD ELEMENTS
The Brighton Series.....................126
The Bristol Series........................128
The Wexford Series....................... 132
Belgard Elements
Installation Instructions..............136
Belgard Elements
Concrete Pad Installation............ 137
Belgard Elements
Limited Warranty......................... 138
ACCESSORIES
Edge Restraints/Spikes...............142
Polymeric Sand
Sealers & Cleaners......................143
Adhesive......................................143
EASY
REFERENCE
EASY REFERENCE
BELGARD.COM/
PROFESSIONAL
EASY REFERENCE
A comprehensive resource library for renderings, product specs, and technical information.
OVERVIEW &
NAVIGATION
View or download PDFs for specific paver and wall shapes, laying patterns, case studies,
LEED information, cutsheets, guides, and more.
Belgard.com/professional provides Dealers &
Contractors a one stop resource for all Belgard
products, including photos, and the Professional
Resource Center provides downloadable tools such
as install guides, catalogs, cut sheets, technical
information and colors.
8
ON THE GO
Have the Belgard Idea Book, inspirational photo galleries and product
BELGARD APP
colors all at your fingertips with the Belgard Hardscapes App. Belgard’s
newest professional resource gives you instant access to valuable sales
tools to help you seal the deal and is conveniently located on your smart
phone or tablet.
Keep up with the latest industry trends, hardscapes news and
inspirational project photos through Belgard’s social media sites. And
SOCIAL
MEDIA
don’t forget to post your project photos and share your company news
as well!
Twitter.com/Belgard
Facebook.com/BelgardHardscapes
Pinterest.com/Belgard
Belgard.com/Blog
YouTube.com/BelgardHardscapes
Contractors using 3D design as a sales tool are experiencing closure
design studio
rates over 85%. Why? 3D designs allow you to show customers what’s
DESIGN
STUDIO
possible, resulting in larger projects, higher sales and better profits.
Belgard.com/Design features dozens of pre-designed 3D outdoor living environments you can
use as a framework to get your clients thinking about their lifestyles, budget and options.
The Belgard Virtual Agency is your one stop shop for customizable materials to help market
your business including advertising, direct mail, literature, point of purchase, t-shirts, hats
MARKETING
SUPPORT
& more. Visit Belgard.com/BVA
9
PAV E R S &
SLABS
PAVERS & SLABS
ANCHOR COBBLE
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
PRODUCT SPECIFICATIONS
Anchor Cobble
8 5/8 x 6 x 2 3/8
FLASH BROWN
LIBERTY BLEND
12
SABLE BLEND
ANCHOR COBBLE LAYING GUIDE
PATTERN B
PATTERN A
For more pattern options visit belgard.com/products/pavers
PALLET INFORMATION / ESTIMATING CHART
NOTES
SqFt/
Cube
SqFt/
Band
Bands/
Pallet
Units/
Pallet
Units/
Layer
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Cube
108
21.6
5
-
-
-
-
-
3,080 lbs
13
CLASSICO PALLET III
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
Classico Pallet III
variable x variable x 2 3/8
FLASH BROWN
LIBERTY BLEND
14
SABLE BLEND
CLASSICO PALLET III LAYING GUIDE
CLASSICO PALLET III — INSTALLATION GUIDELINES
CIRCLE COMPONENTS
(14 CIRCLES)
DIAMETER
(APPROX.)
SQUARE FOOT
(APPROX.)
1
(1) CENTER STONE
.4'
.13
2
(8) SMALL CIRCLE
1.2'
1.1
3
(8) SMALL CIRCLE,
/4 (8) 3
1.9'
2.9
4
(23) LARGE CIRCLE
2.7'
5.6
5
(16) LARGE CIRCLE,
/4 (15) 3
3.4'
9.2
6
(20) LARGE CIRCLE,
/4 (20) 3
4.2'
13.6
7
(24) LARGE CIRCLE,
/4 (24) 3
4.9'
18.8
8
(28) LARGE CIRCLE,
/4 (28) 3
5.7'
25.2
9
(32) LARGE CIRCLE,
/4 (32) 3
6.4'
32.2
10 (35) LARGE CIRCLE,
/4 (35) 3
7.3'
42.0
/4 (38) 3
8.1'
51.5
/4 (44) 3
8.9'
62.2
/4 (50) 3
9.7'
74.0
/4 (43) 3
10.5'
86.5
To get a complete circle, be sure to follow the laying order illustrated above.
Each pallet contains enough pavers for:
• 1 circle of 10 ft. 6 in. in diameter
NOTE: Number of excess stones: Circle stones (9); Small circle stones (24);
Large circle stones (1); 3/4 stones (13); (3.25 sq. ft.). Excess 3/4 stones may also
be used in conjunction with Pallets I & II in areas between circles.
NOTES
SqFt/
Cube
Diameter/
Circle
Layer/
Pallet
Units/
Pallet
Units/
Layer
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Cube
89
10.6 ft
-
-
-
-
-
-
2,360 lbs
*Cube contains all 4 shapes. Full cubes only.
15
COUNTRY MANOR ®
PAVING STONE/CIRCLE
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
A
Large Rectangle
B
6 x 9 x 2 3/8
16
Square
6 x 6 x 2 3/8
C
Country Manor Circle
variable x
6 1/4 x 2 3/8
AMARETTO
SABLE BLEND
BELLA
SANDALWOOD BLEND
FLASH BROWN
SHEFFIELD BLEND
BERGERAC/COUNTRY MANOR CIRCLE LAYOUT
BERGERAC®/COUNTRY MANOR® CIRCLE INSTALLATION CHART
SQUARE
FOOT
A
0
6.3
0.52
.22
2
1
19.3
1.61
2.04
8
2
31.8
2.65
5.52
8
3
44.6
3.72
10.87
26
4
57.4
4.78
17.95
34
5
70.1
5.84
26.80
21
21
6
82.9
6.91
37.52
26
24
7
95.6
7.97
49.90
30
30
8
108.3
9.0
63.64
34
33
9
120.7
10.6
79.52
38
38
10
133.5
11.13
97.33
42
42
11
146.2
12.18
116.56
CIRCLE
DIAMETER
INCHES
FEET
B
C
D
E
8
2
1
90
TOTAL STONES
2
16 251 286 3
EXTRA STONES
8
4
9
14
7
12’
558
42
Full cubes only.
Square feet per cube = 120 square feet.
Height: 60 mm, 2.375"
One pallet contains enough pavers for one (1) circle with a diameter of 12 feet.
For larger circles: Build out additional rows with Country Manor ® Paving Stones.
A
C
2 3/8" x 6 1/4"
/4" x D5 1
2 3/8" x 6 1/4"
/4" x E4 23 3/8" x 6 1/4"
/8" x 3
A
C
Each pallet contains enough pavers for:
• 1 circle with a diameter of 12’
2 3/8" x 6 1/4"
/8" x 3
B 1 2 3/8" x 6 1/4"
/4" x 7 1
2 3/8" x 6 1/4"
/8" x 3
B 1 2 3/8" x 6 1/4"
/4" x 7 1
2 3/8" x 6 1/4"
/4" x D5 1
2 3/8" x 6 1/4"
/4" x E4 23 3/8" x 6 1/4"
/8" x 3
NOTES
SqFt/
Cube
Diameter/
Circle
SqFt/
Layer
Layers/
Cube
Units/
Layer
SqFt
Unit
Weight/
Layer
Weight/
Cube
Large
Rectangle
124
-
12.4
10
-
-
-
3,460 lbs
Square
116
-
11.6
10
-
-
-
3,340 lbs
Circle
120
12 ft
-
-
-
-
-
3,220 lbs
17
DUBLIN COBBLE ®
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
A
3 Piece Modular
5 15/16 x 8 7/8 x 2 3/8
B
5 15/16 x 5 15/16 x 2 3/8
5 15/16 x 2 15/16 x 2 3/8
Large Square
8 7/8 x 8 7/8 x 2 3/8
FLASH BROWN
SANDALWOOD BLEND
FOSSIL BEIGE
SHEFFIELD BLEND
SABLE BLEND
18
DUBLIN COBBLE LAYING GUIDE
Belgard packages multiple sized paving stones on 1 pallet to aid in the ease of ordering and installation by the contractor. Belgard recommends that the products be laid “randomly” allowing no single joint line
to expand longer than 3-3.5 ft in length. Random installation will ensure full use of all the different sized pieces on a pallet.
If you choose to follow one of the patterns below, please be aware that you may have left over pieces of a certain size(s) when finished with the project. Please be sure to properly calculate the percentages
required in the pattern compared to how the product is sold on the pallet. Belgard will not be responsible for any shortages or overages with your project.
PATTERN B
PATTERN A
50%
6x9
50%
33.33%
6x6
33%
16.67%
3x6
17%
6x9
6x6
3x6
PATTERN D
PATTERN C
9x9
60%
9x9
27.27%
6x9
20%
6x9
36.36%
13.33%
6x6
24.24%
6.67%
3x6
12.13%
6x6
3x6
NOTES
SqFt/
Cube
SqFt/
Layer
Layer/
Cube
Units/
Pallet
Units/
Layer
Units/
SqFt
SqFt
Pieces
Weight/
Pallet
A
128
-
-
-
-
-
-
3,220 lbs
B
119.9
12.8
11
-
-
-
1.835
3,275 lbs
19
HOLLAND STONE
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
COLORGARD
PROCESS
ADA
TEXTUREGARD
PROCESS
P
P
80mm only.
A
Holland Stone 60mm
7 7/8 x 3 15/16 x 2 3/8
20
B
Holland Stone 80mm
7 7/8 x 3 15/16 x 3 1/8
CHARCOAL
FOSSIL BEIGE
SABLE BLEND
FLASH BROWN
LIBERTY BLEND
SILEX BLEND
HOLLAND STONE LAYING GUIDE
RUNNING BOND
RUNNING BOND-45
HERRINGBONE
BASKET WEAVE
BASKET WEAVE-45
HERRINGBONE-45
NOTES
SqFt/
Pallet
SqFt/
Band
Bands/
Pallet
Units/
Pallet
Units/
Layer
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Pallet
A
121
20
6
540
-
4.46
-
-
2,940 lbs
B
97
20
5
432
-
4.46
-
-
3,188 lbs
Also available in a special order color for USGBC LEED® Credit.
†
3 1/8” Holland is available on a per order basis.
Square foot varies depending on installation. All measurements are approximate.
21
LAFITT ™ PAVER
3-PC MODULAR
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
3-Piece Modular
7 1/16 x 3 9/16 x 2 3/8
22
7 1/16 x 7 1/16 x 2 3/8
7 1/16 x 10 5/8 x 2 3/8
AMARETTO
DANVILLE BEIGE
BELLA
DELAWARE BLEND
SILEX BLEND
LAFITT PAVER LAYING GUIDE
Belgard packages multiple sized paving stones on 1 pallet to aid in the ease of ordering and installation by the contractor. Belgard recommends that the products be laid “randomly”
allowing no single joint line to expand longer than 3-3.5 ft in length. Random installation will ensure full use of all the different sized pieces on a pallet
If you choose to follow one of the patterns below, please be aware that you may have left over pieces of a certain size(s) when finished with the project. Please be sure to properly
calculate the percentages required in the pattern compared to how the product is sold on the pallet. Belgard will not be responsible for any shortages or overages with your project.
NOTES
SqFt/
Pallet
SqFt/
Layer
Layer/
Pallet
Pieces/
Pallet
Pieces/
Layer
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Cube
124.68
11.33
11
352
32
-
-
-
3,080 lbs
Note: To help avoid scuff marks, Belgard recommends the use of a neoprene or rubber pad attachment on the plate compactor.
23
EDW
T
N
UC
PRO
LAFITT ™
GRANA SLAB
Slab
PEDESTRIAN
REGULAR
TRAFFIC
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
3-Piece Modular
14 7/8 x 7 3/8 x 2
14 7/8 x 14 7/8 x 2
14 7/8 x 22 5/16 x 2
BELLA
SABLE BLEND
24
LAFITT GRANA SLAB PAVER LAYING GUIDE
NOTES
SqFt/
Cube
SqFt/
Layer
Pieces/
Cube
Units/
Pallet
Layers/
Cube
Pieces/
Layer
Weight/
Layer
Weight/
Cube
116.57
11.66
-
-
10
-
-
2,671 lbs.
Belgard does not recommend the use of any plate compactor on this product. All three pieces come on one pallet.
25
LAFITT ™
RUSTIC SLAB
Slab
PEDESTRIAN
REGULAR
TRAFFIC
INDUSTRIAL
TRAFFIC
P
PERMEABLE
ADA
COLORGARD
PROCESS
P
3-Piece Modular
14 7/8 x 7 3/8 x 2
26
14 7/8 x 14 7/8 x 2
14 7/8 x 22 5/16 x 2
AMARETTO
DANVILLE BLEND
BELLA
DELAWARE BLEND
SILEX BLEND
LAFITT RUSTIC SLAB PAVER LAYING GUIDE
NOTES
SqFt/
Cube
SqFt/
Layer
Layer/
Cube
Pieces/
Cube
Pieces/
Layer
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Pallet
116.57
11.66
10
-
-
-
-
-
2,671 lbs.
Belgard does not recommend the use of a plate compactor on this product.
27
LONDON
COBBLE ™
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
COLORGARD
PROCESS
ADA
TEXTUREGARD
PROCESS
P
A
Square
B
6 x 6 x 2 3/8
Rectangle
6 x 9 x 2 3/8
AMARETTO
FLASH BROWN
SABLE BLEND
BELLA
FOSSIL BEIGE
SANDALWOOD BLEND
CHARCOAL
LIBERTY BLEND
SILEX BLEND
Easton only available in Silex Blend, Fossil Beige, Amaretto and Bella.
28
LONDON COBBLE PAVER LAYING GUIDE
RUNNING BOND
90º HERRINGBONE PATTERN
ROMAIN 1
ROMAIN 4
ROMAIN 8
ROMAIN 9
Herringbone (1 to 1)
ROMAIN 10
Running Bond (3 to 1)
LONDON
COBBLE
6" x 6"
6" x 9"
(40%)
6" x 6"
(60%)
(18%)
6" x 9"
(82%)
NOTES: 1. Working with random patterns will often result in leftover pavers that are not returnable. 2. Whenever possible, try to avoid seams longer than 24"
e
i
e (1
M
1)
i ie
e
i
e (2
1)
3- Size Mix
4-Size Random
SqFt/
Cube
SqFt/
Band
Pieces/
Band
Bands/
Cube
4.5" x 6"
Pieces/
(60%)
Cube
6" Pieces/
x 3"
SqFt
Unit
(40%)
SqFt
A
116
17
60
7
420
3.62
B
124
25
60
5
300
2.42
i
Weight/
Layer
Weight/
Pallet
-
-
3,240 lbs
-
-
3,580 lbs
6" x 6"
(25%)
e
i
e
4.5" x 6"
6" x 9"
(25%)
( 5%)
6" x 9"
(25%)
6" x 3"
S
(13%)
ie
4.5" x 6"
(20%)
e
6" x 6"
(27%)
6" x 9"
(40%)
Easton London Cobble packaged: 6x6 @ 112 SqFt/Cube and 2,968 lbs. Weight/Pallet
6x9 @ 120 SqFt/Cube and 3,120 lbs. Weight/Pallet
29
S i
9" x 12.5"
e
MEGA-ARBEL ®
PATIO SLAB
Slab
PEDESTRIAN
REGULAR
TRAFFIC
INDUSTRIAL
TRAFFIC
PERMEABLE
P
ADA
COLORGARD
PROCESS
P
Mega-Arbel Patio Slab
15 3/8 x 21 x 2 3/8
80mm Mega-Arbel Slab can
be ordered for driveway use.
BELLA
FOSSIL BEIGE
30
SILEX BLEND
MEGA-ARBEL LAYING GUIDE
Before you start, familiarize yourself with the Mega Arbel pavers. Begin by placing 3 pavers together to form a cloverleaf.
To make the installation
easier, the front of the
paver should point to the
back of the other paver.
A set of 3 pavers
forming a cloverleaf
STEP 2
STEP 1
Begin by laying 3 pavers at the center of the
surface to be covered.
Add more sets of cloverleafs to fill in the surface
to be covered.
STEP 3
Complete the balance of the surface to be covered
with single pavers.
NOTES
SqFt/
Layer
SqFt/
Pallet
Layers/
Cube
Units/
SqFt
Weight/
Layer
Weight/
Pallet
8.69
104.4
12
-
-
2,788 lbs
To help avoid scuff marks, Belgard recommends the use of a neoprene or rubber pad
attachment on the plate compactor.
* There are 6 different configurations within the same basic footprint.
31
MEGA-BERGERAC ®
Paver
PEDESTRIAN
REGULAR
TRAFFIC
INDUSTRIAL
TRAFFIC
P
P
P
PERMEABLE
ADA
COLORGARD
PROCESS
P
A
3-Piece Modular
9 7/16 x 4 3/4 x 3 1/8
B
9 7/16 x 9 7/16 x 3 1/8
9 7/16 x 14 3/16 x 3 1/8
Large Square
14 3/16 x 14 3/16 x 3 1/8
FLASH BROWN
SABLE BLEND
32
SHEFFIELD BLEND
MEGA BERGERAC PAVER LAYING GUIDE
Belgard packages multiple sized paving stones on 1 pallet to aid in the ease of ordering and installation by the contractor. Belgard recommends that the products be laid “randomly” allowing no single joint line
to expand longer than 3-3.5 ft in length. Random installation will ensure full use of all the different sized pieces on a pallet
PATTERN B
PATTERN A
9.5x14
9.5x9.5
5x9.5
55%
9.5x14
50%
38%
9.5x9.5
33.33%
7%
5x9.5
16.67%
NOTES
SqFt/
Pallet
SqFt/
Layer
Layer/
Cube
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Pallet
A
97.6
9
11
-
-
-
3,575 lbs
B
75.3
9.42
8
-
-
-
2,880 lbs
Cube contains all 3 shapes. Full cubes only.
33
MEGA-LAFITT ™
3-PC MODULAR &
LARGE SQUARE
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
A
3-Piece Modular
10 1/2 x 5 1/4 x 3 1/8
B
10 1/2 x 10 1/2 x 3 1/8
10 1/2 x 15 3/4 x 3 1/8
Large Square
15 3/4 x 15 3/4 x 3 1/8
BELLA
DELAWARE BLEND
34
SILEX BLEND
MEGA LAFITT PAVER LAYING GUIDE
PATTERN A
PATTERN B
16x16
33.33%
16x16
33.33%
10x16
44.44%
10x16
44.44%
10x10
14.82%
10x10
14.82%
5x10
7.41%
5x10
7.41%
10x16
66.67%
10x16
66.67%
10x10
22.22%
10x10
22.22%
5x10
11.11%
5x10
11.11%
Pattern D
PATTERN C
NOTES
SqFt/
Pallet
SqFt/
Layer
Layer/
Pallet
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Pallet
A
92.66
10.30
9
-
-
-
3,340 lbs
B
93.02
10.34
9
-
-
-
3,240 lbs
Note: To help avoid scuff marks, Belgard recommends the use of a neoprene or rubber pad
attachment on the plate compactor.
Large Stone (B) packed separately. All dimensions are nominal and approximate. (A) contains 3
shapes. Full cubes only.
35
EDW
T
N
UC
PRO
MEGA-OLD
WORLD PAVER ™
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
3-Piece Modular
12 13/16 x 10 1/16 x 3 1/8
10 1/16 x 10 1/16 x 3 1/8
FOSSIL BEIGE
36
7 11/16 x 10 1/16 x 3 1/8
SABLE BLEND
MEGA-OLD WORLD PAVER LAYING GUIDE
Belgard packages multiple sized paving stones on 1 pallet to aid in the ease of ordering and installation by the contractor.
Belgard recommends that the products be laid “Randomly.”Random installation will ensure full use of all the different sized pieces on a pallet.
25% RUNNING BOND WITH OLD WORLD PAVER
RUNNING BOND
25% Running Bond
with Old World Paver
NOTES
SqFt/
Pallet
SqFt/
Layer
Layers/
Cube
Weight/
Layer
Weight/
Pallet
77.07
11.28
8
-
2,700 lbs.
To help avoid scuff marks, Belgard recommends the use of a neoprene
or rubber pad attachment on the plate compactor.
37
OLD WORLD PAVER ™
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
3-Piece Modular
5 1/8 x 7 3/4 x 3 1/8
5 1/8 x 10 1/4 x 3 1/8
5 1/8 x 12 13/16 x 3 1/8
DANVILLE BLEND
SILEX BLEND
38
OLD WORLD PAVER LAYING GUIDE
Belgard packages multiple sized paving stones on 1 pallet to aid in the ease of ordering and installation by the contractor.
Belgard recommends that the products be laid “Randomly.”Random installation will ensure full use of all the different sized pieces on a pallet.
25% RUNNING BOND WITH OLD WORLD PAVER
RUNNING BOND
25% Running Bond
with Old World Paver
NOTES
SqFt/
Pallet
SqFt/
Layer
Layers/
Cube
Pieces/
Layer
Weight/
Cube
90.27
11.28
8
-
3,250 lbs.
To help avoid scuff marks, Belgard recommends the use of a neoprene or rubber
pad attachment on the plate compactor.
39
URBANA ® STONE
3-PC MODULAR &
LARGE STONE
Paver
PEDESTRIAN
REGULAR
TRAFFIC
P
P
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
A
3-PC Modular
7 7/8 x 11 13/16 x 2 3/8
B
7 7/8 x 7 7/8 x 2 3/8
7 7/8 x 3 15/16 x 2 3/8
Large Square
11 13/16 x 11 13/16 x 2 3/8
BELLA - NEW FOR 2014
FOSSIL BEIGE
40
SILEX BLEND
URBANA STONE LAYING GUIDE
3-PIECE & LG. SQUARE - PATTERN A
3-PIECE & LG. SQUARE - PATTERN B
3-PIECE - PATTERN D
PATTERN E
3-PIECE - PATTERN C
NOTES
SqFt/
Pallet
SqFt/
Layer
Layer/
Pallet
Layer/
Cube
Pieces/
Layer
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Pallet
A
113.6
11.63
11
-
-
-
-
-
3,060 lbs
B
116.5
11.6
10
11
-
-
-
-
3,020 lbs
3 piece has various shapes mixed. Large stone packaged separately.
Note: To help avoid scuff marks, Belgard recommends the use of a neoprene or rubber pad attachment on the plate compactor.
Shape B, the Urbana large stone is not recommended for vehicular traffic.
41
PERMEABLE
PAV E R S
PERMEABLE
PAVERS
AQUA-ROC ™ II
Permeable Paver
PEDESTRIAN
REGULAR
TRAFFIC
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
P
P
P
P
P
P
TEXTUREGARD
PROCESS
Large Unit
Half-Size Unit
7 7/8 x 3 15/16 x 3 1/8
3 15/16 x 3 15/16 x 3 1/8
FOSSIL BEIGE
SILEX BLEND
44
AQUA-ROC II LAYING GUIDE
HERRINGBONE
BASKET WEAVE
RUNNING BOND
NOTES
SqFt/
Pallet*
SqFt/
Layer
Layers/
Pallet
Pieces/
Cube
Units/
SqFt
SqFt
Unit
Weight/
Layer
Weight/
Pallet
90
11.5
8
320
-
-
-
3,120 lbs
*When not utilizing the square, half-size unit, the sq. ft. per pallet = 86.08
Please note that an interlocking permeable paver installation will vary greatly from a typical interlocking concrete paver
installation and will differ on a job to job basis. Please contact your local Belgard sales representative for more details. See the
Belgard Permeable Paver detail at Belgard.com
45
ECO-DUBLIN ®
3-PC MODULAR
Permeable Paver
PEDESTRIAN
REGULAR
TRAFFIC
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
P
P
P
P
P
P
3-Piece Modular
6 7/8 x 3 7/16 x 3 1/8
6 7/8 x 6 7/8 x 3 1/8
6 7/8 x 10 1/4 x 3 1/8
FOSSIL BEIGE
SILEX BLEND
46
ECO-DUBLIN PAVER LAYING GUIDE
STONES IN THE CENTER ARE COLORED
DARK GRAY TO HELP SHOW THE
INSTALLED PATTERN
STONES THAT ARE COLORED MEDIUM
GRAY ARE SHOWING THE MINIMUM
STONES REQUIRED FOR STONE SWITCH
NOTES
SqFt/
Pallet
SqFt/
Layer
Layers/
Pallet
Pieces/
Pallet
Pieces/
Layer
Units/
SqFt
SqFt/
Piece
Weight/
Layer
Weight/
Pallet
91.6
11.45
8
-
-
-
-
-
3,156 lbs
Cube contains all 3 shapes. Full cubes only. Square foot varies depending on installation. All measurements are approximate.
installation and will differ on a job to job basis. Please contact your local Belgard sales representative for more details. See the
Belgard Permeable Paver detail at www.belgard.com
47
TURFSTONE ™
Permeable Paver
PEDESTRIAN
REGULAR
TRAFFIC
INDUSTRIAL
TRAFFIC
PERMEABLE
ADA
P
P
P
P
P
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
Turfstone
23 5/8 x 15 3/4 x 3 1/8
GRAY
48
TURFSTONE PAVER LAYING GUIDE
MODIFIED RUNNING BOND
MODIFIED RUNNING BOND
NOTES
SqFt/
Pallet
SqFt/
Layer
Layers/
Cube
Pieces/
Pallet
Pieces/
Layer
Units/
SqFt
SqFt/
Piece
Weight/
Layer
Weight/
Pallet
84
42
2
32
-
-
2.6
-
1,915 lbs
Each piece = 2.6 SqFt
Square foot varies depending on installation. All measurements are approximate.
installation and will differ on a job to job basis. Please contact your local Belgard sales representative for more details.
See the Belgard Permeable Paver detail at www.belgard.com
49
WA L L S
WALLS
ANCHOR
ASPEN STONE ®
Retaining Wall
RESIDENTIAL
COMMERCIAL
P
STEPS
COLUMNS
P
P
FIREPIT
RETAINING
WALLS
MAILBOX
P
Aspen Stone
4 x 11 5/8 x 7
To cap this wall,
use 3” Universal Cap
on pg. 54
FLASH BROWN
LIBERTY BLEND
52
SABLE BLEND
ANCHOR ASPEN STONE WALL LAYING GUIDE
How Many Blocks Do I Need?**
Wall Height
Wall Length
5’
10’
15’
20’
25’
30’
1 Course
6
11
16
21
27
32
2 Courses
11
21
32
42
53
63
3 Courses
16
32
47
63
79
94
4 Courses
21
42
63
84
105
125
5 Courses
27
53
79
105
131
157
6 Courses
32
63
94
125
157
188
**Quantity calculations are rounded up to the next block. If the section is one, two or three courses high, bury one-half of the first
course for any size wall. If the section is four courses high, the full first course must be buried. Given heights assume no slope
below or above the wall, no surcharge loads, and a compacted backfill zone.
For more pattern options visit belgard.com/products/retaining_walls
NOTES
SqFt/
Per Pallet
SqFt/
Layer
Pieces/
Per Cube
Layers
Per Cube
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Cube
-
-
120
-
-
-
2,760 lbs
53
ANCHOR
DIAMOND ® 9D
Retaining Wall
RESIDENTIAL
COMMERCIAL
P
STEPS
COLUMNS
P
P
RETAINING
WALLS
FIREPIT
MAILBOX
P
A
Diamond 9D
B
6 x 17 3/4 x 9
3” Universal Cap
C
3 x 17 1/4 / 12 x 10 3/8
6” Stone Cut Corner
6 x 16 x 8
FLASH BROWN
SANDALWOOD BLEND
SABLE BLEND
54
NOTES
Shoulder
Pins
Pieces/
Pallet
Layers
Pallet
Pieces
Per Layer
Sq. Ft/
Cube
Weight/
Per Cube
A
No
60
5
12
44.4
3,360 lbs
B
No
48
4
12
-
2,065 lbs
C
No
40
4
10
-
4,000 lbs
ANCHOR DIAMOND 9D ESTIMATING GUIDE
For project material estimating, use the formulas listed in each step.
1. WALL UNIT ESTIMATING
Determine the square footage of the total wall, including buried base
course. Wall square footage (SF) = length (L) x height (H).
Straight Face: SF x 1.4 = # units
2. CAP ESTIMATING Convert wall length (L) to inches: L x 12 = L in inches (LI). Cap factor
(CF) = cap front inches + cap back inches ÷ 2. (Additional caps will
be needed for elevation changes and curves.)
LI ÷ CF = # caps
3. LEVELING PAD AGGREGATE ESTIMATING
Leveling pad aggregate is a compactible base material of 3⁄4-inch
minus (with fines). The leveling pad extends at least 6 inches in
front of and behind the wall units and is at least 6 inches deep after
compaction. Wall length in feet (L) ÷ 27 x 1.1 = cubic yards CY).
CY x 1.6 = tons.m
L ÷ 27 x 1.1 = CY
CY x 1.6 = tons
4. DRAINAGE AGGREGATE ESTIMATING
Drainage aggregate is clear, 1-inch crushed stone (with n o fines).
The drainage column extends 12 inches behind the wall units. Wall
length (L) x total wall height (H) = square feet (SF) ÷ 27 x 1.1 = cubic
yards (CY). CY x 1.6 = tons.
SF ÷ 27 x 1.1 = CY
CY x 1.6 = tons
5. GEOSYNTHETIC REINFORCEMENT ESTIMATING Choose the
appropriate estimating chart based on your project conditions.
55
56
57
ANCHOR
DIAMOND PRO ®
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
P
P
P
P
FIREPIT
RETAINING
WALLS
MAILBOX
P
A
Diamond Pro
8 x 18 x 12
B
Corner
C
8 x 18 x 9
4” Universal Cap
4 x 17 1/4 / 12 x 10 3/8
FLASH BROWN
SABLE BLEND
SANDALWOOD BLEND
58
SqFt/
Per Pallet
Pieces/
Per Pallet
Layers
Per Pallet
Pieces
Per Layer
Weight/
Per Pallet
A
48
48
4
12
3,475 lbs
B
36
36
3
12
4,302 lbs
C
36
72
6
12
2,065 lbs
ANCHOR DIAMOND PRO ESTIMATING GUIDE
1. WALL UNIT ESTIMATING
Determine the square footage of the total wall, including buried base
course. Wall square footage (SF) = length (L) x height (H).
Straight Face: SF x 1.4 = # units
2. CAP ESTIMATING Convert wall length (L) to inches: L x 12 = L in inches (LI). Cap factor
(CF) = cap front inches + cap back inches ÷ 2. (Additional caps will
be needed for elevation changes and curves.)
LI ÷ CF = # caps
3. LEVELING PAD AGGREGATE ESTIMATING
Leveling pad aggregate is a compactible base material of 3⁄4-inch
minus (with fines). The leveling pad extends at least 6 inches in
front of and behind the wall units and is at least 6 inches deep after
compaction. Wall length in feet (L) ÷ 27 x 1.1 = cubic yards CY).
CY x 1.6 = tons.m
L ÷ 27 x 1.1 = CY
CY x 1.6 = tons
Drainage aggregate is clear, 1-inch crushed stone (with n o fines).
The drainage column extends 12 inches behind the wall units. Wall
length (L) x total wall height (H) = square feet (SF) ÷ 27 x 1.1 = cubic
yards (CY). CY x 1.6 = tons.
SF ÷ 27 x 1.1 = CY
CY x 1.6 = tons
5. GEOSYNTHETIC REINFORCEMENT ESTIMATING Choose the
appropriate estimating chart based on your project conditions.
59
60
61
62
63
64
65
66
67
ANCHOR DIAMOND
PRO STONE CUT ®
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
P
P
P
P
FIREPIT
RETAINING
WALLS
MAILBOX
P
AD
Cap Unit
Large
17 x1/4”
8”4”x x18”
12”/ 12”
x 10 3/8”
CD
Corner
Cap
17 x1/4”
8”4”x x18”
9” / 12”
x 10 3/8”
B
Medium Unit
8” x 11” x 12”
D
Small Unit
8” x 7” x 12”
Cap
4” x 17 1/4” / 12”
x 10 3/8”
FLASH BROWN
SABLE BLEND
SANDALWOOD BLEND
PALLET INFORMATION
ESTIMATING CHART
68
SqFt/
Per Pallet
Weight/
Per Cube
A
48
3,700 lbs
B
48
4,225 lbs
C
36
4,302 lbs
D
36
2,065 lbs
Large unit “A” is on 1 pallet and sold per piece.
Medium “B” & Small “C” units are on another
pallet, sold per set.
ANCHOR DIAMOND PRO STONE CUT ESTIMATING GUIDE
69
70
71
72
73
74
75
76
77
ANCHOR VERTICA ®
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
P
P
P
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
A
Victorian Face
8 x 18 x 11
B
Corner
C
8 x 18 x 9
Cap*
4 x 17 1/14 x 10 3/8
Special Order Only.
FLASH BROWN
SANDALWOOD BLEND
SABLE BLEND
Pieces/
Per Pallet
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Cube
A
36
-
-
3,060 lbs
B
40
-
-
3,200 lbs
C
72
4,320 lbs
4” Universal Cap may be used as a cap for this wall, but lugs on
top must be knocked off the top course.
78
79
80
81
82
83
84
85
86
87
ANCHOR
VERTICA PRO ®
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
P
P
P
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
A
Victorian Face
B
Corner
Anchor Vertica Pro is special order only.
8 x 18 x 20
8 x 18 x 9
Vertica Pro can only be made with a Victorian Face.
4” Universal Caps can be used to cap this wall.
FLASH BROWN
SABLE BLEND
88
89
90
91
92
93
94
95
96
97
ANTIQUE QUARRY ™
Freestanding & Retaining Wall
RESIDENTIAL
COMMERCIAL
P
STEPS
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
P
P
P
P
P
A
Retaining Wall
B
Freestanding Wall
6” x 8” x 8”
6” x 8” x 11”
6” x 16” x 8”
6” x 16” x 11”
C
Corner / Column
16” x 8” x 6”
D
Cap
8” x 13 1/2” x 3”
6” x 16” x 8” w/Joint
DELAWARE BLEND
SILEX BLEND
98
ANTIQUE QUARRY ESTIMATING FORMULA
ANTIQUE QUARRY RETAINING WALL SYSTEM
ANTIQUE QUARRY FREESTANDING WALL SYSTEM
1. EXPOSED WALL UNIT ESTIMATING
Determine the square footage of the exposed wall:
Exposed wall length (L) x height (H) = square feet (SF).
Straight Walls
Determine the square footage of the exposed wall Exposed wall
length (L) x height (H) = square feet (SF).
SF + 1.8 = # pieces of each 6-inch-high unit
#6” units x 2 = # pieces of each 3-inch-high unit
Curved Walls
Determine the square footage of the exposed wall: When estimating, measure the largest wall face. Exposed wall length (L) x height (H) = square feet (SF)
SF + 1.5 = # pieces of each unit
2. BURIED BASE UNIT ESTIMATING
Build buried base course using 6” x 16” and
6” x 8” units. Determine the length (L) of the base in feet.
L + 2 = # pieces each 6” unit
3. CAP ESTIMATING
Convert wall length (L) to inches: L x 12 = Lin inches (LI).
For curved walls, add 10%.
LI + 7.5 = # caps
4.
LEVELING PAD AGGREGATE ESTIMATING
Leveling pad aggregate is a compactible base material of 3/4-inch minus
(with fines). The leveling pad is a minimum of 6 inches in front of and behind
the wall units and 6 inches deep after compaction. Use wall length (L) in feet. (Assumes 24-inch-wide trench.)
L + 27 x 1.1 = CY
CY x 1.6 = tons
Drainage aggregate is clear 1-inch crushed stone (with no fines).
The drainage column extends 12 inches behind the wall units.
Wall length (L) in feet x total wall height (H) in feet to
determine square feet (SF).
SF + 27 x 1.1 = CY
CY x 1.6 = tons
Build buried base course using 6” x 16” and 6” x 8” units.
Determine the length (L) of the base in feet.
3. COLUMN ESTIMATING
Estimate the quantity needed for a column by multiplying the height (H) in feet, including buried course x 8.
6. GEOSYNTHETIC REINFORCEMENT ESTIMATING
See reinforcement estimating charts on pages 58-60.
SqFt/
Pallet
Pieces/
Pallet
Weight/
Pallet
A
30
-
2,480 lbs.
B
18
-
1,780 lbs.
C
-
20
1,400 lbs.
D
-
144
3,420 lbs.
L + 1.8 = # pieces each 6” unit
Add 10% for curves.
H x 8 = # units per column
4. CAP ESTIMATING
Convert wall length (L) to inches: L x 12 = L inches (LI). For curved wall,
add 10%.
LI + 7.5 = # caps
5. WALL LEVELING PAD AGGREGATE ESTIMATING
the wall units and 6 inches deep after compaction. Use wall length (L) in feet to determine cubic yards (CY) (Assumes 24-inch-wide trench)
L + 27 x 1.1 = CY
CY x 1.6 = tons
6. COLUMN LEVELING PAD AGGREGATE
The leveling pad for a 24- x 24-inch column or pilaster is 36 inches square and at least 6 inches deep after compaction. Use leveling pad length (L) x width (W) x depth (D) in inches to calculate cubic yards (CY).
(L x W x D) + 27 x 1.1 = CY
CY x 1.6 x # columns = tons
NOTES
99
BELAIR WALL ®
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
P
P
P
P
P
P
P
A
6” Retaining Wall
6 x 16 x 8 w/joint
F
Cap
DANVILLE BLEND
3 x 7/8 x 13 1/2
6 x 16 x 8
G
Cap End
6x8x8
3 x 8 x 13 1/2
B
3” Retaining Wall
H
3x8x8
Wall End
DELAWARE BLEND
6 x 8 x 11
3 x 16 x 8
C
6” Freestanding Wall
6 x 8 / 6 x 11
6 x 16 / 14 x 11
D
3” Freestanding Wall
SILEX BLEND
6 x 8 / 6 x 11
3 x 16 / 14 x 11
E
Corner / Column
6 x 16 x 8
Also available in Bella.
100
BELAIR WALL ESTIMATING FORMULA
BELAIR RETAINING WALL SYSTEM
BELAIR FREESTANDING WALL SYSTEM
Determine the square footage of the exposed wall:
Exposed wall length (L) x height (H) = square feet (SF).
Straight Walls
Determine the square footage of the exposed wall Exposed wall
length (L) x height (H) = square feet (SF).
Curved Walls
Determine the square footage of the exposed wall: When estimating, measure the largest wall face. Exposed wall length (L) x height (H) = square feet (SF)
SF + 1.5 = # pieces of each unit
Build buried base course using 6” x 16” and
6” x 8” units. Determine the length (L) of the base in feet.
L + 2 = # pieces each 6” unit
3. CAP ESTIMATING
Convert wall length (L) to inches: L x 12 = Lin inches (LI).
For curved walls, add 10%.
LI + 7.5 = # caps
4.
LEVELING PAD AGGREGATE ESTIMATING
the wall units and 6 inches deep after compaction. Use wall length (L) in feet. (Assumes 24-inch-wide trench.)
L + 27 x 1.1 = CY
CY x 1.6 = tons
Drainage aggregate is clear 1-inch crushed stone (with no fines).
The drainage column extends 12 inches behind the wall units.
Wall length (L) in feet x total wall height (H) in feet to
determine square feet (SF).
SF + 27 x 1.1 = CY
CY x 1.6 = tons
Build buried base course using 6” x 16” and 6” x 8” units.
Determine the length (L) of the base in feet.
L + 1.8 = # pieces each 6” unit
Add 10% for curves.
3. COLUMN ESTIMATING
Estimate the quantity needed for a column by multiplying the height (H) in feet, including buried course x 8.
H x 8 = # units per column
4. CAP ESTIMATING
Convert wall length (L) to inches: L x 12 = L inches (LI). For curved wall,
add 10%.
6. GEOSYNTHETIC REINFORCEMENT ESTIMATING
See reinforcement estimating charts on pages 58-60.
LI + 7.5 = # caps
5. WALL LEVELING PAD AGGREGATE ESTIMATING
the wall units and 6 inches deep after compaction. Use wall length (L) in feet to determine cubic yards (CY) (Assumes 24-inch-wide trench)
L + 27 x 1.1 = CY
CY x 1.6 = tons
6. COLUMN LEVELING PAD AGGREGATE
The leveling pad for a 24- x 24-inch column or pilaster is 36 inches square and at least 6 inches deep after compaction. Use leveling pad length (L) x width (W) x depth (D) in inches to calculate cubic yards (CY).
(L x W x D) + 27 x 1.1 = CY
CY x 1.6 x # columns = tons
NOTES
A
B
C
D
E
F
G
H
SqFt/
Pallet
30
30
18
18
-
-
-
-
SqFt/
Layer
10
5
6
3
-
-
-
-
Pieces/
Pallet
60
120
36
72
20
144
36
42
Layers/
Pallet
3
6
3
6
2
2
2
-
Pieces/
Layer
20
20
12
12
10
-
-
-
Weight/
Cube
2,480
lbs
2,380
lbs
1,800
lbs
1,780
lbs
1,400
lbs
3,420
lbs
lbs
lbs
101
CELTIK ® WALL
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
P
P
P
FIREPIT
RETAINING
WALLS
MAILBOX
P
P
A
90mm Celtik Wall
B
135mm Celtik Wall
3 9/16 x 8 7/8 x 17 1/8
5 5/16 x 8 7/8 x 17 1/8
3 9/16 x 8 7/8 x 13 9/16
5 5/16 x 8 7/8 x 13 9/16
3 9/16 x 8 7/8 x 10 7/16
5 5/16 x 8 7/8 x 10 7/16
3 9/16 x 8 7/8 x 6 7/8
5 5/16 x 8 7/8 x 6 7/8
C
BELLA
SHEFFIELD BLEND
SABLE BLEND
Cap
3 9/16 x 12 x 15 3/4
NOTES
SqFt/
Per Pallet
SqFt/
Layer
Pieces/
Per Cube
Layers
Per Cube
Weight/
Piece
Weight/
Per Cube
A
32.45
4.6
-
7
-
3,100 lbs.
B
34.71
-
-
-
-
3,240 lbs.
C
-
-
64
-
55
3,520 lbs.
90 and 135 Celtik Wall are a pin clipped, antiqued wall system consisting of (4) different shapes each.
For 135 Celtik Wall, 7.2 square face feet per layer, except top layer, 6.3 square face feet plus bag of alignment clips.
Full cubes only. All dimensions are nominal and approximate.
Retaining walls over 36” in height will require additional engineering including soil reinforcement or geogrid.
*Note: Shape 90mm Celtik Wall is manufactured with two grooves. Split shape 90mm Celtik Wall for use as corners.
102
CELTIK WALL LAYING GUIDE
CELTIK PIN SYSTEM
The Celtik® Wall anchor pin has been designed to facilitate the construction of walls with a maximum height of 42".
The special pin system has been designed to stabilize the overall structure and guide the installation of units. The
dual-position system allows for the construction of vertical or 9°-sloped walls. Units are delivered with two different
anchor pins: a regular pin with blades, and a second pin without blades, designed for the construction of corners.
wall position
VerticalVertical
wall position
Maximum
Maximum
verticalvertical
height
21''
height 21''
NOTE: Pins for the different Celtik® units are inserted from underneath, as shown in the illustration below. This is why units are placed bottom up on the pallet.
CELTIK® WALL CONSTRUCTION
Vertical wall position
Maximum
vertical
Select one of the following
arrangements:
height 21''
1. 90 standard units
3. combination of 90 and 135 standard units
Slope
wall position
Slope wall
position
Maximum
Maximum
verticalvertical
height
42''
height 42''
M
Basic modelModel w
Basic model
Slope wall position
Maximum vertical
height 42''
For a certified installer in your area,
see your Anchor Dealer.
Basic model
Model without blades
A. Installation of the first row: It is preferable to use the longest units for the first row, and lay them on the compacted foundation. It is important to carefully align the first-row
units horizontally to ensure that the wall will be level. Even if the selected arrangement is a combination of 90 and 135 units, the first row must contain only one size (90 or 135).
At this stage no pins are used.
B. Installation of following rows, walls of 90 or 135 standard units: Harmoniously lay units of
following rows, not forgetting, however, to insert a pin in each unit before installation. First insert
pins in units to be installed. Use appropriate grooves, depending on whether the wall is to be
vertical or 9-sloped. Lay each row by overlapping joints of the last row installed.
Supplied radiuses may be used vertically to give a natural and original look to the layout. Two of
those radiuses measure two rows high. Use a small radius (6 3/4") to match two 90 unit rows (see
illustration X), and a medium radius (10 1/4") to cover two 135 unit rows (see illustration Y).
Combination of 90 and 135 standard units Carefully distribute different sizes of units to give a wellbalanced, natural look to the layout (see opposite arrangement examples). To integrate vertical
elements to the arrangement, split 17 1/4"-long units (90 or 135 high) in halves. A split half covers
the total height of a 90 unit plus a 135 unit. (see illustration Z).
90
90 standard
standard units
units
135
135 standard
standard units
units
90 standard units
135 standard units
Illustration
Illustration X
X
Illustration
Illustration Y
Y
Illustration X
Illustration Y
90
90 standard
standard units
units with
with jumper
jumper
135
135 standard
standard
90 standard units with jumper
Illustration
135 standard
Illustration
units
jumper
units with
with jumper
Z
units with jumper
Z
Illustration Z
50% 90 standard units
C. Back filling: Every two rows, fill the space behind units with 3/4" clean stone. Repeat steps B and C up to the desired height. NOTE: When
and 135 units, spaces may appear between some units in the structure.
Building Steps Using Celtik® Capping Units: Creating straight steps or curved landings: Steps or
landings can be laid using Celtik standard wall and Celtik capping units. Semicircular landings can also
be created using the Celtik beveled capping units.
C
12"
50% 90
90 standard
standard units
units
50%
50% 135
135 standard
standard units
units
50%
50%
50%
50%
50%
90 standard
standard units
units
90
135 standard
standard units
units with
with jumper
jumper
Capping
135
180 mm ")(7
Unit
3 1/2
"
combining
90
50% 135 standard units with jumper
Capping Unit
Curved steps using Celtik standard wall units
and Celtik beveled cappingPaver
units
Unit
3 1/2
"
Unit
3 1/2
"
Note: Celtik steps and risers have a combined height of 7". If the height of the wall and that of the
steps must be the same, it is important that the height of the wall containing the steps is in multiples of
7". For a certified installer in your area, see your Anchor Dealer.
CAPPING UNIT
CLEAN STONE
3/4"
5 1/4" UNIT
Capping Unit
12"
Unit
3 1/2
"
Capping Unit
180 mm ")(7
PERFORATED
DRAIN
Capping Unit
GEOTEXTILE
FOUNDATION
0–3/4"
IN SITU SOIL
Unit
3 1/2
"
Unit
3 1/2
"
Unit
3 1/2
"
Unit
3 1/2
"
Paver
Unit
3 1/2
"
90 Celtik Wall illustrated
103
Unit
3 1/2
"
Unit
CELTIK ® WALL
DOUBLE SIDED
Freestanding Wall
RESIDENTIAL
COMMERCIAL
P
STEPS
COLUMNS
FIREPIT
P
P
P
RETAINING
WALLS
MAILBOX
P
A
90mm Celtik Wall Double Sided
3 1/2 x 11 1/16 Front
x 9 3/16 Back x 9
F
Double Sided Capping Unit
BELLA
SHEFFIELD BLEND
3 1/2 x 16 Front x
3 11/16 Back x 11
3 1/2 x 9 3/16 Front
x 7 5/16 Back x 9
3 1/2 x 7 5/16 Front
x 5 7/16 Back x 9
3 1/2 x 5 7/16 Front
x 3 9/16 Back x 9
B
SABLE BLEND
135mm Celtik Wall Double Sided
5 1/4 x 11 1/16 Front
x 9 3/16 Back x 9
5 1/4 x 9 3/16 Front
x 7 5/16 Back x 9
5 1/4 x 7 5/16 Front
x 5 7/16 Back x 9
5 1/4 x 5 7/16 Front
x 3 9/16 Back x 9
A
B
C
NOTES
SqFt/
Per Pallet
SqFt/
Per Layer
Pieces/
Per Cube
Layers
Per Pallet
Weight/
Per Cube
34.32
4.44
-
8
3,700 lbs.
SqFt/
Per Pallet
Pieces
Per Layer
Pieces
Per Pallet
Weight/
Piece
Weight/
Per Pallet
38.52
-
-
-
4,100 lbs.
-
64
55
3,350 lbs
90 and 135 Celtik Wall are a pin clipped, antiqued wall system consisting of (4) different shapes each.
For 135 Celtik Wall, 7.2 square face feet per layer, except top layer, 6.3 square face feet plus bag of alignment clips.
Full cubes only. All dimensions are nominal and approximate.
Retaining walls over 36” in height will require additional engineering including soil reinforcement or geogrid.
*Note: Shape 90mm Celtik Wall Double Sided is manufactured with two grooves.
Split shape 90mm Celtik Wall Double Sided for use as corners.
104
CELTIK PIN SYSTEM
The Celtik® Wall anchor pin has been designed to facilitate the construction of walls with a maximum height of 42".
The special pin system has been designed to stabilize the overall structure and guide the installation of units. The
dual-position system allows for the construction of vertical or 9°-sloped walls. Units are delivered with two different
anchor pins: a regular pin with blades, and a second pin without blades, designed for the construction of corners.
wall position
VerticalVertical
wall position
Maximum
Maximum
verticalvertical
height
21''
height 21''
NOTE: Pins for the different Celtik® units are inserted from underneath, as shown in the illustration below. This is why units are placed bottom up on the pallet.
CELTIK® WALL CONSTRUCTION
Vertical wall position
Maximum
vertical
Select one of the following
arrangements:
height 21''
3. combination of 90 and 135 standard units
Slope
wall position
Slope wall
position
Maximum
Maximum
verticalvertical
height
42''
height 42''
M
Basic modelModel w
Basic model
Slope wall position
Maximum vertical
height 42''
For a certified installer in your area,
see your Anchor Dealer.
Basic model
Model without blades
A. Installation of the first row: It is preferable to use the longest units for the first row, and lay them on the compacted foundation. It is important to carefully align the first-row
units horizontally to ensure that the wall will be level. Even if the selected arrangement is a combination of 90 and 135 units, the first row must contain only one size (90 or 135).
At this stage no pins are used.
B. Installation of following rows, walls of 90 or 135 standard units: Harmoniously lay units of
following rows, not forgetting, however, to insert a pin in each unit before installation. First insert
pins in units to be installed. Use appropriate grooves, depending on whether the wall is to be
vertical or 9-sloped. Lay each row by overlapping joints of the last row installed.
Supplied radiuses may be used vertically to give a natural and original look to the layout. Two of
those radiuses measure two rows high. Use a small radius (6 3/4") to match two 90 unit rows (see
illustration X), and a medium radius (10 1/4") to cover two 135 unit rows (see illustration Y).
Combination of 90 and 135 standard units Carefully distribute different sizes of units to give a wellbalanced, natural look to the layout (see opposite arrangement examples). To integrate vertical
elements to the arrangement, split 17 1/4"-long units (90 or 135 high) in halves. A split half covers
the total height of a 90 unit plus a 135 unit. (see illustration Z).
90
90 standard
standard units
units
135
135 standard
standard units
units
90 standard units
135 standard units
Illustration
Illustration X
X
Illustration
Illustration Y
Y
Illustration X
Illustration Y
90
90 standard
standard units
units with
with jumper
jumper
135
135 standard
standard
90 standard units with jumper
Illustration
135 standard
Illustration
units
jumper
units with
with jumper
Z
units with jumper
Z
Illustration Z
C. Back filling: Every two rows, fill the space behind units with 3/4" clean stone. Repeat steps B and C up to the desired height. NOTE: When
and 135 units, spaces may appear between some units in the structure.
Building Steps Using Celtik® Capping Units: Creating straight steps or curved landings: Steps or
landings can be laid using Celtik standard wall and Celtik capping units. Semicircular landings can also
be created using the Celtik beveled capping units.
C
12"
50% 90
90 standard
standard units
units
50%
50% 135
135 standard
standard units
units
50%
50%
50%
50%
50%
90 standard
standard units
units
90
135 standard
standard units
units with
with jumper
jumper
Capping
135
180 mm ")(7
Unit
3 1/2
"
combining
90
50% 135 standard units with jumper
Capping Unit
Curved steps using Celtik standard wall units
and Celtik beveled cappingPaver
units
Unit
3 1/2
"
Unit
3 1/2
"
Note: Celtik steps and risers have a combined height of 7". If the height of the wall and that of the
steps must be the same, it is important that the height of the wall containing the steps is in multiples of
7". For a certified installer in your area, see your Anchor Dealer.
CAPPING UNIT
CLEAN STONE
3/4"
5 1/4" UNIT
Capping Unit
12"
Unit
3 1/2
"
Capping Unit
180 mm ")(7
PERFORATED
DRAIN
Capping Unit
GEOTEXTILE
FOUNDATION
0–3/4"
IN SITU SOIL
Unit
3 1/2
"
Unit
3 1/2
"
Unit
3 1/2
"
Unit
3 1/2
"
Paver
Unit
3 1/2
"
90 Celtik Wall illustrated
105
Unit
3 1/2
"
Unit
CELTIK ® WALL
PIER KIT
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
P
Pier Kit-3 1/2” (90mm)
2’ x 2’ x 3’
Celtik Pier Kit is only
available in 90mm size
BELLA
SABLE BLEND
106
SHEFFIELD BLEND
Celtik Column is made up of 48 units which creates a 43” column with a 4” cap unit
and a full layer buried. Each piece is 6” x 18” x 3 1/2”
NOTES
SqFt/
Per Pallet
SqFt/
Layer
Pieces/
Per Cube
Layers
Per Cube
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Pallet
40
-
40
-
-
-
2,120 lbs
107
KEYSTONE COUNTRY
MANOR ® WALL &
FIRE PIT KIT
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
P
P
P
P
P
P
P
A
6” Wall Stone
B
3” Wall Stone
6 x 16/14 x 10
3 x 16/14 x 10
6 x 12/12 x 10
3 x 12/10 x 10
6 x 12/10 x 10
3 x 10/8 x 10
C
Cap
3 x 10.5 Front/12 Back x 17.25
D
Country Manor Cap
3 x 14 Front/8 Back x 13
6 x 10/8 x 10
3 x 6/6 x 10
6 x 6/4 x 10
3 x 6/4 x 10
CM Shoulder Pin
108
BELLA
SABLE BLEND
FLASH BROWN
SANDALWOOD BLEND
SHEFFIELD BLEND
KEYSTONE COUNTRY MANOR WALL LAYING GUIDE
Level Backfill
2' Max
H
L
D
Sloping Backfill
2' Max
H
L
D
Surcharge Backfill
250 psf
2' Max
H
L
Gravel ( = 34 )
Sand ( = 30 )
H (feet) D (feet) L (feet) layers VERSA-Grid
Clay ( = 28 )
4
5
0.5
0.5
0
3.5
0
2
n/a
VG 3.0
4
5
0.5
0.5
4.0
4.0
1
2
VG 3.0
VG 3.0
4
5
0.5
0.5
4.0
4.5
1
2
VG 3.0
VG 3.0
6
7
0.5
1.0
4.0
5.0
2
3
VG 3.0
VG 3.0
6
7
0.5
1.0
4.5
5.5
2
3
VG 3.0
VG 3.0
6
7
0.5
1.0
5.0
5.5
2
3
VG 3.0
VG 3.0
8
9
10
1.0
1.0
1.0
5.5
6.0
6.5
4
4
5
VG 3.0
VG 3.0
VG 3.0
8
9
10
1.0
1.0
1.0
6.0
6.5
7.0
4
5
5
VG 3.0
VG 3.0
VG 3.0
8
9
10
1.0
1.0
1.0
6.0
6.5
7.0
4
5
6
VG 3.0
VG 3.0
VG 3.0
12
1.0
8.0
6
VG 3.0
12
1.0
8.5
7
VG 3.0
12
1.0
8.5
7
VG 3.0
Gravel ( = 34 )
Sand ( = 30 )
Clay ( = 28 )
4
5
0.5
0.5
4.0
4.0
1
2
VG 3.0
VG 3.0
4
5
0.5
0.5
4.5
4.5
1
2
VG 3.0
VG 3.0
4
5
0.5
0.5
4.5
5.5
2
2
VG 3.0
VG 3.0
6
7
0.5
1.0
4.5
5.5
3
4
VG 3.0
VG 3.0
6
7
0.5
1.0
5.5
6.5
3
4
VG 3.0
VG 3.0
6
7
0.5
1.0
6.0
8.0
3
4
VG 3.0
VG 3.0
8
9
1.0
1.0
6.0
6.5
4
5
VG 3.0
VG 3.0
8
9
1.0
1.0
7.0
8.0
5
6
VG 3.0
VG 3.0
8
9
1.0
1.0
9.5
11.0
5
6
VG 3.0
VG 3.0
10
12
1.0
1.0
7.5
8.5
6
7
VG 3.0
VG 3.0
10
12
1.0
1.0
8.5
10.0
6
7
VG 3.0
VG 5.0
10
12
1.0
1.0
12.0
15.0
6
7
VG 5.0
VG 5.0
Gravel ( = 34 )
Sand ( = 30 )
4
5
6
7
8
9
10
12
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
4.0
4.5
5.0
6.0
6.5
7.0
7.5
9.0
2
2
3
4
4
5
5
7
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
4
5
6
7
8
9
10
12
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
Clay ( = 28 )
4.5
5.5
6.0
7.0
7.5
8.5
9.0
10.0
2
2
3
4
5
5
6
7
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 5.0
4
5
6
7
8
9
10
12
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
5.5
6.0
6.5
7.5
8.0
9.0
9.5
11.0
2
2
3
4
5
5
6
7
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 3.0
VG 5.0
D
NOTES
SqFt/
Per Pallet
SqFt/
Layer
Pieces/
Per Pallet
Layers
Per Pallet
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Cube
A
42
8.4
-
5
-
-
3,840 lbs.
B
42
4.2
-
10
-
-
4,240 lbs.
C
-
-
48
-
160
32
2,065 lbs
D
-
-
160
-
-
-
4,980 lbs
109
KEYSTONE®
COMPAC & STANDARD
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
P
P
P
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
P
A
Compac Straight Face
B
Compac Curved Face
8 x 18 x 12
8 x 18 x 12
E
F
4” Universal Cap
C
Compac Corner
8 x 18 x 9
D
Standard Straight Face
8 x 18 x 18
Keystone Pin
4 x 17 1/4 / 12 x 10 3/8
110
BROWN
SANDALWOOD BLEND
SABLE BLEND
TAN
KEYSTONE COMPAC & STANDARD LAYING GUIDE
NOTES
SqFt/
Per Pallet
Straight
Pins
Pieces/
Per Cube
Pieces/
Per Layer
Layers
Per Pallet
Weight/
Per Piece
Weight/
Per Pallet
Compac
Straight Face
-
Yes
48
-
-
76.1
3,652 lbs
Compac
Curved Face
-
Yes
48
-
-
76.1
3,652 lbs
Compac Corner
-
Yes
36
-
-
-
4,302 lbs
Standard
Straight Face
-
-
45
-
-
91
4,095 lbs
4” Universal Cap
-
-
72
12
6
-
2,065 lbs
111
KEYSTONE ®
VICTORIAN
Retaining Wall
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
FIREPIT
P
RETAINING
WALLS
MAILBOX
P
A
Victorian Face
8 x 18 x 12
B
8 x 18 x 9
FLASH BROWN
SABLE BLEND
112
Victorian Corner
C
Victorian Mini Cap
4 x 18 x 10 1/2
SANDALWOOD BLEND
KEYSTONE VICTORIAN
STANDARD LAYING GUIDE
NOTES
SqFt/
Per Pallet
Straight
Pins
Pieces/
Per Pallet
Layers
Per Pallet
Weight/
Per Piece
Weight/
Per Pallet
Victorian Face
-
Yes
48
-
76.1
3,652 lbs
Corner Left
-
Yes
40
-
100
4,000 lbs
Corner Right
-
Yes
40
-
100
4,000 lbs
Mini Cap Victorian
72
4,320 lbs
113
WESTON STONE ®
UNIVERSAL &
FIRE PIT KIT
Retaining Wall
RESIDENTIAL
COMMERCIAL
P
STEPS
COLUMNS
FIREPIT
P
P
P
RETAINING
WALLS
MAILBOX
P
A
3-Piece Modular
B
4x8x8
Universal
4 x 12 x 8
C
4 x 12 x 8
Fire Pit Kit
4 x 12 x 8
4 x 16 x 8
AMARETTO*
FLASH BROWN
BELLA
SABLE BLEND
SHEFFIELD BLEND
*Amaretto is only available in
Weston Stone Universal Wall
114
WESTON STONE UNIVERSAL LAYING GUIDE
FIRE PIT KITS INSTALLATION INSTRUCTIONS.
Before you begin, check the building code in your area and with your local fire department. There may be restrictions on open fires or requirements as to where you can place the fire pit
in relation to your house or other structures. The fire pit should sit on a firm, non-combustible base, such as 6” of compacted gravel. Dig a hole at the center point approximately 12”
wide by 2’ deep and fill it with crushed stone. The hole acts like a sump to drain rainwater, ashes and soot.
• Use the insert as a guide to lay out the first course. Place it on the ground and position the block around the frame. Set aside the ring.
Round: 8 Large and 10 small units per layer
Square: 12 units per layer
Diameter - 39.5”
• Position the second course by offsetting the joints from the block in the row below. For a uniform inside diameter, plumb the units to the back of the block. Repeat this for the
remaining courses until you have reached the desired height.
Round: 4 courses
Square: 4 courses
Diameter: - 28”
Insert the fire-ring into the blocks and check for a snug fit around the top flange. Fill the fire pit with a graded stone or sand to the bottom of the inside flange. Reposition blocks if
needed. A few dabs of construction grade adhesive along the outside edge may be used to secure the top two layers of block.
Package contents:
• metal fire ring
• firebrick
• sand
NOTES
SqFt/
Pallet
Pieces/
Per Cube
Layers
Per Cube
Pieces
Per Layer
Units/
Pallet
Pallet
Weight
3 PIECE
42
-
8
-
-
3,800 lbs.
UNIVERSAL
-
120
-
-
-
3620 lbs
This is a pinless system. Maximum wall height is 2 1/2 feet. Walls exceeding 2 1/2 feet in height may require geogrid reinforcing
and the consultation of a qualified engineer. Contact your Belgard sales representative or dealer for assistance. Weston Stone
wall units must be glued with a quality construction adhesive to develop the necessary mechanical bond. All measurements
herein are approximate. Natural materials are used in the manufacturing of this product. Color variations can be expected. For
actual color, request a color sample.
115
COPING, EDGERS
& STEPS
COPING, EDGERS
& STEPS
AQUASTYL ®
Coping
PEDESTRIAN
LIGHT
TRAFFIC
REGULAR
TRAFFIC
HEAVY
TRAFFIC
PERMEABLE
ADA
P
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
Aquastyl Coping
11 1/2 x 8 7/8 x 3 1/8
Aquastyl is available in Amaretto, Bella, Flash Brown, & Sable Blend.
Please consult your local sales representative for color samples.
.......................................................................................
For more info visit belgard.com/products/finishing_touches
NOTES
SqFt/
Per Pallet
SqFt/
Per Piece
Pieces/
Per Cube
Weight/
Per Cube
-
-
135
3,375 lbs.
*Note: Sold by the piece
118
Weight/
Per Pallet
BULLNOSE 6”
PAVER
Coping
PEDESTRIAN
LIGHT
TRAFFIC
REGULAR
TRAFFIC
HEAVY
TRAFFIC
PERMEABLE
ADA
P
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
Bullnose 6” Paver
5 15/16 x 11 13/16 x 2 3/8
AMARETTO
FLASH BROWN
BELLA
SABLE BLEND
NOTES
SqFt/
Per Pallet
SqFt/
Per Piece
Pieces/
Per Pallet
Layers
Per Pallet
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Pallet
-
-
168
4
42
-
2124 lbs.
*NJ/NY/PA: Antiquated 6” Bullnose Paver also available in Brownstone Blend, Flash Brown Blend, Sable Blend and Sandalwood.
**Tumbled also available.
119
ANGLIA EDGER ®
Edger
PEDESTRIAN
LIGHT
TRAFFIC
REGULAR
TRAFFIC
HEAVY
TRAFFIC
PERMEABLE
ADA
COLORGARD
PROCESS
TEXTUREGARD
PROCESS
P
4-Piece Modular
5 1/4 x 18 x 8
5 1/4 x 15 5/8 x 8
BELLA
120
5 1/4 x 10 1/2 x 8
5 1/4 x 8 1/8 x 8
SILEX BLEND
ANGLIA EDGER LAYING GUIDE
CONCAVE
STRAIGHT
90º CORNER
NOTES
LinearFt/
Layer
LinearFt/
Cube
Pieces/
Per Cube
Layers
Per Cube
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Cube
23.25
69.75
-
3
-
-
2,678 lbs.
121
COUNTRY MANOR ®
CURB STONE
Edger
RESIDENTIAL
COMMERCIAL
STEPS
COLUMNS
FIREPIT
RETAINING
WALLS
MAILBOX
P
Country Manor Curb Stone
8 x 12 x 4
FLASH BROWN
SABLE BLEND
122
COUNTRY MANOR CURB STONE LAYING GUIDE
NOTES
SqFt/
Per Pallet
SqFt/
Layer
Pieces/
Per Cube
Layers
Per Cube
Pieces
Per Layer
Weight/
Per Piece
Weight/
Per Cube
120
-
-
-
-
-
3300 lbs
123
124
BELGARD
ELEMENTS
BELGARD
ELEMENTS
125
THE BRIGHTON
SERIES
BRIGHTON FIREPLACE
BTFPAW (36" wood)
BTFPABG (Natural gas, without chimney)
BTFPATG (Natural gas, with chimney/top)
BTFPABGL (LP burning, without chimney/top)
BTFPATGL (LP burning, with chimney/top)
Please note NG and LP are special
order units and may have an increased
lead time. Contact your rep for info.
BRIGHTON WOOD BOXES
126
BRIGHTON SERIES SPEC SHEET
8X8 floor access
For more info visit belgard.com/products/belgard_elements
BELGARD ELEMENTS SPECIFICATIONS
Approx. Weight
Per Box
Approx. Weight
Top Unit
Approx. Weight
Bottom Unit
Rough
Dimensions
FIREPLACE
-
1130 LBS.
4495 LBS.
3.3’D X 4.4’W X 8.5’H
WOOD BOXES
1240 LBS.
-
-
2.3’D X 3’W X 2.9’H
127
THE BRISTOL
SERIES
BRISTOL FIREPLACE
BRISTOL WOOD BOXES
BRISTOL ARCHED HEARTH
BLFRPW (36” wood)
BLFRPBOG (Natural gas, without chimney)
BLFRPBG (Natural gas, with chimney/top)
BLFRPBOL (LP burning, without chimney/top)
BLFRPBL (LP burning, with chimney/top)
Please note NG and LP are special
order units and may have an increased
lead time. Contact your rep for info.
128
Approx. Weight
Per Box
Approx. Weight
Top Unit
Approx. Weight
Bottom Unit
Rough
Dimensions
FIREPLACE
-
3100 LBS.
3935 LBS.
3’D X 5’W X 9.5’H
WOOD BOXES
1900 LBS.
-
-
2.3’D X 3’W X 3.25’H
ARCHED HEARTH
1080 LBS.
2’D X 5’W X 3.25’H
BRISTOL SERIES SPEC SHEET
BRISTOL FIREPLACE
BRISTOL ARCHED HEARTH
BRISTOL WOOD BOXES
129
THE BRISTOL
SERIES
BRISTOL GRILL ISLAND
BRISTOL BRICK OVEN
Please specify NG or LP when
ordering. Not actual grill and
doors shown.
Double Access Doors
Model: 20-30-SSD
Cut-Out: 20 3/4"H X 30"W
Approx. Weight
Per Box
Approx. Weight
Top Unit
Approx. Weight
Bottom Unit
Rough
Dimensions
BRICK OVEN
-
3485 LBS.
3015 LBS.
4’D X 4’W X 8.1’H
GRILL ISLAND
3834 LBS.
-
-
3’D X 6.3’W X 4.3’H*
* Includes: AOG 36" Grill
Includes: AOG 30" Double door
130
36" AOG Grill - Model: 36NB
Cut-Out: 37"W X 19 1/2"D X 8 1/2"H
Primary Cooking Surface: 648 sq. in.
BTU's: 48,000 Primary & 13,000 Backburner
BRISTOL SERIES SPEC SHEET
BRISTOL BRICK OVEN
BRISTOL GRILL ISLAND
131
THE WEXFORD
SERIES
Non-Stock Items
WEXFORD FIREPLACE
WEXFORD WOOD BOXES
WEXFORD STRAIGHT HEARTH
WXFRPW (36" wood)
WXFRPBOG (Natural gas, without chimney)
WXFRPBG (Natural gas, with chimney/top)
WXFRPBOL (LP burning, without chimney/top)
WXFRPBL (LP burning, with chimney/top)
Please note NG and LP are special order
units and may have an increased lead time.
Contact your rep for info.
132
Approx. Weight
Per Box
Approx. Weight
Top Unit
Approx. Weight
Bottom Unit
Rough
Dimensions
FIREPLACE
-
3100 LBS.
3943 LBS.
3’D X 5’W X 9.5’H
STRAIGHT HEARTH
1160 LBS.
-
-
2’D X 5’W X .9’H*
WOOD BOXES
1900 LBS.
2.3’D X 3’W X 3.25’H
WEXFORD SERIES SPEC SHEET
WEXFORD FIREPLACE
WEXFORD STRAIGHT HEARTH
WEXFORD WOOD BOXES
133
THE WEXFORD
SERIES
Non-Stock Items
WEXFORD GRILL ISLAND
WEXFORD BRICK OVEN
Please specify NG or LP when
ordering. Not actual grill and
doors shown.
Double Access Doors
Model: 20-30-SSD
Cut-Out: 20 3/4"H X 30"W
Approx. Weight
Per Box
Approx. Weight
Top Unit
Approx. Weight
Bottom Unit
Rough
Dimensions
BRICK OVEN
-
3800 LBS.
3040 LBS.
4’D X 4’W X 8.1’H
GRILL ISLAND
3895 LBS.
-
-
3’D X 6.3’W X 4.3’H*
* Includes: AOG 36" Grill
Includes: AOG 30" Double door
134
36" AOG Grill - Model: 36NB
Cut-Out: 37"W X 19 1/2"D X 8 1/2"H
Primary Cooking Surface: 648 sq. in.
BTU's: 48,000 Primary & 13,000 Backburner
WEXFORD SERIES SPEC SHEET
WEXFORD GRILL ISLAND
WEXFORD BRICK OVEN
135
BELGARD ELEMENTS
INSTALLATION INSTRUCTIONS
Elements are very easy to install. Here are a couple cross section details to consider. Keep in mind, these are
not engineered plans. Make sure you check with your local municipality for their requirements when installing
Elements. Here are a few other key points to remember:
• Always place a piece of material (plywood or carpet work well) between your forks and the Elements
to prevent chipping.
• Always transport the Element on the pallet it comes with until you are ready to place on the
permanent location.
• Make sure to use a ratchet strap to secure the Element to the loader when transporting and placing.
• Handle Elements with care - they are concrete, but not indestructible.
• Make sure to size the machine to the Elements weight.
• All Elements are designed to be buried 4" below finish grade.
BELGARD
ELEMENT
136
BELGARD ELEMENTS
CONCRETE PAD INSTALLATION
137
Limited Warranty
This Element has been manufactured by Belgard Hardscapes, a division of Oldcastle Architectural, Inc.
Belgard warrants to the first consumer purchaser (but not to any transferees or subsequent owners) that
the Element will be free from defects in workmanship and materials, under normal use, for as long as
the Element is owned by such first consumer purchaser, and that the Element, when installed and used
in accordance with the written installation manual, shall comply with all applicable federal, state and
local laws. If the Element includes a fireplace, it shall comply with the requirements of the Standards
for Factory-Built Fireplaces (UL-127). Notwithstanding the foregoing, some third party accessories and
components such as fire pit/table pans and screens, gas fire pit components, brick oven domes, fireplace
screens, glass doors, and remote controls, water feature pumps and spillways, lighting and electrical,
sinks and faucets, stainless kitchen doors, stainless appliances, and countertop material sold with or
incorporated into the Element are warranted only for the shorter of the warranty period above or the
following specific periods set forth below, and are subject to the limitations described below: Please see
specific manufacturer’s warranty for more details.
The above warranty periods begin on the date of initial purchase of the Element by the first consumer
purchaser. All warranties expire upon any transfer or change of ownership of the Element (or the residence
at which it is first installed) to any person other than the first consumer purchaser.
Belgard’s sole obligation under this express warranty shall be, at Belgard’s option and expense, to
replace the Element or part, or to repair the Element or part. Belgard warrants any replaced Element or
part for a period of ninety (90) days from shipment, or through the end of the original warranty period,
whichever is longer. All Elements or parts that are replaced become the property of Belgard.
Belgard makes no warranty regarding texture, color, color change, efflorescence, fading or other aesthetic
characteristics of any Element. Belgard does not guarantee that any replacement components will be an
exact match to the color or texture of the original Element.
138
This limited warranty is void in cases of damage in transit, negligence, abuse, abnormal usage,
misuse, accidents, improper maintenance or any unauthorized repair, modification or adjustment
of the Element. This limited warranty does not cover labor or other costs or expenses associated
with repairs performed by anyone other than Belgard or one of Belgard’s authorized agents
absent Belgard’s prior written consent. Any implied warranties are limited to the duration of
this express warranty. Some states do not allow the limitation on implied warranties so the
foregoing limitation may not apply to you. In the event that the exclusive remedies provided
above fail, Belgard’s liability shall be limited to an amount equal to the original purchase
price paid by the first consumer purchaser. Under no circumstances shall Belgard be liable
for any special, indirect, incidental, consequential, punitive or similar damages, all of which
are expressly excluded from this warranty and from any implied warranty arising under state
law, including any implied warranty of merchantability and any implied warranty of fitness for
a particular purpose, and some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to
state. This limited warranty applies to Elements installed in or at personal residences only. No
warranty whatsoever, express or implied, is made with respect to commercial applications.
139
ACCESSORIES
ACCESSORIES
EDGE RESTRAINTS
Edge restraints are required in order to prevent paving stones from
separating or creeping.
RETAINING WALL PINS
Retaining wall pins serve to connect and accurately position individual
wall blocks, assuring both strength and proper alignment.
GEOGRID
Geogrid increases the wall height that can be constructed.
When placed between horizontal layers, the reinforcement grid acts
as a “tie back” to resist the outward movement of the retained wall.
142
CLEANERS
SEALERS
Belgard offers a complete line of high-performance cleaning
products specifically formulated to clean concrete pavers and
restore them to their original beauty.
Enhance color and make cleaning easier.
ADHESIVES
JOINT SANDS
Quick and easy to apply and are used to secure
concrete retaining wall caps.
Sweep-in joint sand is used to bind pavers to help
stabilize installations and lock out weeds.
143
an oldcastle com pan y
Facebook.com/BelgardHardscapes
...........................
anchor
new jersey region
975 burnt tavern road
brick, nj 08724
ph: 800.68.block (800.682.5625)
Twitter.com/Belgard
Pinterest.com/Belgard
Belgardhardscapes.wordpress.com
YouTube.com/BelgardHardscapes
belgard.com
© Copyright 2014 Oldcastle. All Rights Reserved.
BEL13-0126

guide resource - Amazon Web Services

Transcription

Similar documents

Save page as PDF

Craftique Textures

Destacker Pallet Dispenser

Read Full Letter - January 22, 2014

Pail Palletizer Brochure - Heisler Packaging Equipment

Mixed Load Robotic Palletizing

Customers

roBuSto - Bricoman

The Mill Springs - Mill Springs Homeowners Association

Q-300 - Lantech

GUIDE BOOK

Brochure PDF - Modern Builders Supply, Inc.

Belgard - Southern Living Custom Builder