10pcs Motorcycle flywheel drive puller set Motorcycle

10pcs Motorcycle flywheel drive puller set
909Y1
•Thread Sizes:
85mmL
M14xP1.5; M16xP1.5; M18xP1.5
65mmL
M19xP1.0; M28xP1.5;
M20xP1.0 / M27xP1.25; M22xP1.0 / M25xP1.5;
M22xP1.5 / M26xP1.5; M24xP1.0 / M27xP1.0L;
M26xP1.0 / M28xP1.0
• Application:
YAMAHA, SUZUKI, HONDA, BOSCH, DUCAN, GLERA,
SAM, CAGIVA, SFERA, KYMCO, MBK, PEUGEOT, KIMOO,
MOTOPLATT, KAWASAKI, KOKUSAN, MINARELLI, DUCATI.
10/17.8/18.8/1.15'
1780g
Motorcycle flywheel puller M27x1.5
9Y0182
• Designed to remove the motorcycle flywheels.
• Puller includes M27x1.5 right hand internal threads,
M12x1.25 crankshaft protector cap.
• Application:
Honda: CG125 / ML / BIZ100 / POP100
60/20/21/1.1'
333g
Motorcycle flywheel puller M30x1.0
9Y0183
• Designed to remove the motorcycle flywheels.
• Puller includes M30x1.0 right hand internal threads,
M12x1.25 crankshaft protector cap.
• Application:
Yamaha:WR 250F 2003 – 2008 and WR 450F 2003
60/25.5/26.5/1.1'
6-1
425g
Motorcycle flywheel puller M30x1.25
9Y0185
• Designed to remove the motorcycle flywheels.
• Puller includes M30x1.25 right hand internal threads, M12x1.25
crankshaft protector cap.
• Application:
Honda: CRF450X, CRF450X8
60/25.8/26.8/1.1'
430g
Motorcycle flywheel puller M30x1.5
• Designed to remove the motorcycle flywheels.
• Puller includes M30x1.5 right hand internal threads, M12x1.25
crankshaft protector cap.
• Application:
Honda: Most 1989-1990 FL400R pilot models.
Kawasaki: Some KLF300 quad models.
Suzuki: Most LT160/230/250, TM125/250/400, 1970’s TS250,
2004-2009 DR200 enduro models and most early PE, TS
models.
Other: European CZ MX and enduro models.
60/25.4/26.4/1.1'
424g
Motorcycle flywheel puller M28x1.0
MOTORCYCLE
9Y0186
9Y0188
• Designed to remove the motorcycle flywheels.
• Puller includes M28x1.0 right hand internal threads, M12x1.25
crankshaft protector cap.
• Application:
Honda: CRF450X 2004-2008, TRX450R/ER 2006-2007
Kawasaki: 2008 KLX450R
Suzuki: 2008 RMZ450
60/17.2/18.2/1.1'
287g
6-2
Motorcycle flywheel puller M26x1.0
9Y0187
• Designed to remove the motorcycle flywheels.
• Puller includes M26x1.0 right hand internal threads, 12mm
shaft protector cap.
• Application:
KTM: 250 RFS, 250SX-F, 400, 450, 520, 525
60/12.8/13.8/1.1'
213g
Motorcycle flywheel puller T bar M27x1.0
9Y0181
• Designed to remove the motorcycle flywheels.
• Size: M27x1.0.
• Applicable:
Honda: CR80R/125R/250R/450R/480R/500R, XL80/100/100S/170,
XR100/100R, XR50/CRF50 00-04, FL250, ATC70/110 (CDI
ONLY), ATC185/ 250R, TRX250R 86-89,TRX90 93-00,
TRX70/125 & EARLY 50cc
Suzuki: 125/160EK/250R, DR100/125/200, DS80, ALT185
Yamaha: 1 968 & later, BW80, RIVA50, PW50, RZ350, TT500,
XT500, YFM80/100/200/225, YFS200, YFZ350, YSR50,
YT125/175 & YZ400F, YZ450F
Kawasaki: KD/KX/KDX80, KM100, KS100, KS125
KTM: 65SX 99-04, 85SX 04, 105SX 04, 200 EXC/MXC 98-05,
125/250 SX/EXC/MXC 98-05 & 250/300/380 SX/EXC/MXC
97-05
60/15.0/16.0/1.0'
250g
Flywheel puller for DUCATI
902Y1
• Designed to remove the motorcycle flywheels.
• Applications:Ducati 250/350/450 and most later bevel single widecase models.
24/12.0/13.0/0.7'
6-3
500g
Clutch holding tool
9Y0101
• Made from medium carbon steel with hardened jaws
• Holds clutch hubs, flywheels, gears, sprockets, etc...
• Features spanner pins
• Jaws open to 5" wide
20/14/15/1.2'
700g
Rotor and sprocket holder
9Y0111
• Keeps flywheels, rotors and sprockets from
rotating during removal and installation.
• Holds sprockets and rotors with holes
center-to-center at a minimum distance of 1/2"
(13mm) and a maximum distance of 9"(230mm).
• Features 5mm and 9mm pins.
• Adjustable stop screw keeps tool open at set distance.
36/20.5/22.0/2.1'
569g
903Y1
• Designed for easy installation of most fork seals.
• Works on either conventional or inverted forks.
• Unique adjustable insert will work on dia. 26 to
45mm.
20/22.0/23.0/0.7'
2200g
MOTORCYCLE
Universal fork seal driver
Motorcycle fork cap wrench (46x50)
9Y0121
• For removing the fork caps on late-model RMs & CRs
• Can be used for removal of a compression stack on
late-model RMs
• Replaces Suzuki OEM 09941-53630
• One end is 46mm, the other is 50mm
• Also fits 2010 Honda CRF250R
48/16/17/0.74'
334g
6-4
Fork compression valve removal tool
9Y0122
• Ideal tool to remove the compression valve from cartridge.
• 19mm drive hex with 36 mm octagon.
• Made of 6061-T6 aluminum.
• Applications:
Honda:CRF250R 2010-2012, CRF450R 2009-2012,
Kawasaki:KX 450F 2009-2012
Yamaha:YZ 125/250 2005-2012, YZ 250F/450F 2006-2012
144/7.5/9.0/1.5'
52g
Twin chamber KYB compression valve wrench
9Y0146
• This tool removes the Compression Body from
the cartridge on twin-Chamber KYB forks.
• Applications:
Yamaha:YZ 125/250 05-09, YZ250F/450F 06-09
144/17.0/18.5/1.0'
118g
3/8”DR. Fork damper rod holder
9Y0123
• Ideal tool to hold damper rod when disassembling and
assembling front forks.
• It provides a secure method of holding the inner damper
rod while removing the bolt from the bottom of the fork
leg on Kawasaki models.
• Applications:KZ, ZS, KX and KDX front fork dampers.
96/14.5/16.0/1.3'
151g
Angle driver for motorcycle carburetor
910Y1
• Deep-access tool particularly suited to adjustment of
motorcycle carburetor.
• One turn of handle equals one turn of blade.
• 90° and straight gear-boxes.
• Furnished with set of driver bits.
12/11.0/12.0/2.1'
6-5
916g
Carburetor synchronize tool set
919G2
• For testing fuel pump carburetor and transmission
check auto with 2~4pc carburetors.
• Gauge: Pressure: 0~15 PSI:0~1 kg/cm2
Vocuum: 0~28 in-Hg (0~70 cm-Hg)
• Contents:
4pc 3-1/2" Synchronizer gauges with fixed plate
4pc Rubber hose 8 X 5 x 750mm
4pc Extension tube 3.9 x 52mm
4pc Extension tube 3.9 x 122mm
8pc Cone type connector 8 x 40mm
4pc Adapters 10 X 53mm (M6 x 0.75)
4pc Adapters 10 X 60mm (M6 x 1.0)
6/20.0/21.0/2.25'
3330g
All purpose chain separating tool
• For pressing rivets out of the chains.
24/18.5/19.5/1.6'
770g
MOTORCYCLE
9Y0135
Chain breaker and riveting tool set
913Y1
• Versatile 3-in-1 tool can be used on both cam
chains and drive chains.
• T he kit supplied with adequate components to
break chains from #35 to #630.
• Includes three pin sizes for compatibility with most
chains (2.2 mm, 2.9 mm & 3.8 mm) .
• A lso includes tools and plates needed to rivet
hollow nose master links.
20/16.5/17.5/1.5'
825g
6-6
Chain link pliers
9Y0131
• Designed to simplify installation or removal of cliptype master chain links.
48/16.9/7.9/2.3'
143g
Chain puller tool
9Y0132
• This chain puller is made for work on drive chains found
on motorcycles and all-terrain vehicles (ATVs).
• Tightening the forcing screw pulls the jaws together
to hold the chain for easy removal or installation of the
chain connector or master link.
48/12.0/13.0/2'
252g
Motorcycle chain brush
9Y0133
• Composite, angled chain brush features adjustable brush
adaptors to fit various size chains.
• Suitable for use on all chain types.
72/8.5/10.0/3.6'
118g
Motorcycles belt tension gauge
9Y0141
• This tool can be used to adjust belt tension on most
motorcycles equipped with a secondary drive belt.
• This tool provides a simple way to firm the belt for
proper tension.
240/18.0/19.5/1.6'
6-7
75g
Tappet adjusting tool set
9Y0142
• Set contains three wrenches (8, 9 & 10mm) and three adjusters (screw
type and 3 & 4mm square type).
• I nterchangeable adjusters and wrenches provide nine different
combinations.
• Ideal for most marks and models of motorcycles, ATVs and ATCs.
• Applications:
HONDA: All ATC’s and motorcycles with 4-cycle engines and screw
type adjusters.
YAMAHA: SR 185/250, XT/TT250, XS400, ST185
SUZUKI: All 4-cycle ATV’s and motorcycles with screw-type adjusters.
Any tappet adjuster with 8, 9 or 10mm adjusting nut and 3 or 4mm squart
slotted adjuster.
48/12.5/13.5/0.6'
260g
9Y0143
• Used to install valve spring keepers.
• Replaces the large cumbersome valve spring compressor.
• T hese tools are aimed at saving time when replacing
valves in modern 16 to 20 valve head.
• Designed to fit the valves of 4 -cylinder heads (5.5 mm
valve stem diameter or larger with under 40 lbs).
36/13.0/14.0/0.6'
361g
MOTORCYCLE
Large tools work on valves of 4-valve-per-cylinder heads
Small tools work on valves of 4-valve-per-cylinder heads
9Y0143B
• Used to install valve spring keepers.
• Replaces the large cumbersome valve spring compressor.
• This tool is designed to save time in replacing valves of
modern 16 to 20 valve heads.
• This tool works on valves of 4- or 5- valve-per-cylinder
heads. (Valve stem diameter of 5mm or smaller)
36/15.0/16.0/0.6'
420g
6-8
Valve spring compressor
62110
• These tools are designed to compress and release valve
spring after removing the collets. Pantograph-type levers
ensure a consistent coaxial contact with the valve.
• Contents:
3pc Driving adaptor: 16; 19; 23; 25; 30 mm
3pc pressure screw: 70mmL; 110mmL; 120mmL
1pc C Clamp
10/21.5/22.5/2.2'
2150g
Piston ring pliers
62002
• Save by reducing ring breakage.
• Tapered jaws to remove and install most passenger car
and light truck rings from 3/64" to 1/4" (1.2mm ~6.3mm).
144/18.0/19.0/2.15'
135g
Piston ring compressor tool
62005
• D esigned to prevent ring breakage during cylinder
installation.
• It can easily be removed after cylinder is in position.
• Tool supplied with 6 rings to be applicable to most
engine sizes.
• Fits 35-73 mm
60/16.23/17.23/2'
270.5g
Piston ring compressor for Motorcycle
6202080
• For easy insertion of piston into cylinder bore and even
compression over full ring length.
• Ratchet mechanism.
• Capacity: 40 - 80 mm diameter.
50/7.0/8.0/0.89'
6-9
140g
Oil filter wrench
9B0701
• Steel jaw grips filter without slipping.
• Use with 3/8"drive.
• Suitable for filter 2-1/2" to 3-1/8" (60m/m-80m/m).
48/18.1/19.1/1.7'
380g
Timing and crankshaft turning tool for DUCATI
• Ideal tool to turn timing mark on the degree wheel
for perfect valve adjustments.
• It makes ignition-timing work to be performed.
• Applications:DUCATI Monster | Multistrada 600 /
620 / 748 / 750 / 800 / 848 / 851 / 888
/ 900 / 916 / 996 / 998 / 999 / 1000 /
1098 / 1198.
36/18.0/19.5/1.9'
500g
Engine rotating tool for DUCATI
9Y0302
• It allows you to rotate your engine easily and safely
while checking the valve clearances or setting the
timing.
• Applications:DUCATI Monster /748/996/999/SS.
96/12.5/13.5/0.6'
MOTORCYCLE
9Y0301
130g
Timing and crankshaft turning tool for DUCATI
9Y0303
• It allows you to attach through the primary cover access
hole and fit into the crankshaft notch for ignition-timing
work accuracy.
• It is also suitable for mounting most available degree
wheels.
• Applications:Ducati 250/350/450/750
36/14.5/16.0/1.1'
403g
6-10
Cam holder for DUCATI
9Y0305
• This tool helps you to loosen the cam gear nut easily.
• Applications:D UCATI 250 350 450 750 single twin
bevel.
20/19.2/20.2/0.43'
960g
Spark plug cap removal tool for BMW
9Y0306
• This tool works on R and F series coil-over bikes.
• It is designed to slip onto the cap from the front and that allows you to
remove the spark plug cap without damaging it.
• If the cap is very difficult to remove, choose a proper bar, slip it through
the1/4” hole on the tool and then you can pry the cap loose easily.
• Applications:
All R1150 from Dec 2002 production
R1200C, R1200C I/M, R1200 Montauk from October 2002 production
All R1200 from model year 2003 and newer
R1100S from December 2002 production
All F Twins
All G Thumpers
All new style K1200/1300s
144/7.5/9.0/1.8'
52g
4-in-1 Hex axle tool
9Y0151
• Fits internal hex on many late-model sport-bike axles
and some dirt bikes.
• Four metric hex sizes: 17, 19, 22 and 24mm.
• 3/8 in. square drive on both ends.
• Applications:
BMW: 1200GS, R1200 RT
Buell: XB9R, XB9S, XB12R, XB12S (2003-2004)
Honda: CBR600RR, CBR1000RR
Kawasaki: ZX6R, ZX6RR, ZX600E/K, ZX7R, ZX9R, Z1000
Suzuki: GSXR 2000-2004, DL 1000 V-Strom (all), SV1000
Yamaha: R1, R6
100/17.0/18.0/0.6'
6-11
170g
Motorcycle spindle tool
9T1403
• Use a socket on the free end to remove spindle.
• 24mm for SUZUKI / HONDA
• 22mm for KAWASAKI
• 19mm for YAMAHA
100/13.6/14.6/1.5'
136g
Front and Rear wheel nut tool set
909Y2
• The combined socket is two sizes in one, a 55mm
12pt for the rear and a 28mm 6pt for the front.
• The other sockets size as follow:
41mm/46mm 6/12pt for the rear wheel
25mm/30mm 6pt and 28mm 12pt for the front wheel
• All sockets with 1/2” drive.
15/16.5/18.5/1.4'
1100g
9Y0201
• To detach a piston from the disc brake base of a
motorcycle
• Ratcheting handle allows the operator to replace a
piston conveniently
• Jaw adjustment:30-33 mm.
• Length:240 mm.
10/13.5/17.6/2.1'
MOTORCYCLE
Brake piston detaching tool for motorcycle
270g
Parking brake piston socket for YAMAHA
9Y0202
• Material:Heavy duty Cr-Mo steel construction
• Applications:
YAMAHA:M AJESTY (07~11), MAXAM (05~10), GRAND
MAJESTY 400 (05~09), GRAND MAJESTY 250
(04~07), TMAX (05~10)
240/16.0/18.0/1.8'
67g
6-12
Parking brake piston socket for HONDA / SUZUKI
9Y0203
• Material:Heavy duty Cr-Mo steel construction
• Applications:
SUZUKI:SKYWAVE250 (07~11), SKYWAVE400 (07~11)
HONDA:FORZA (00~03)
240/14.0/16.0/1.8'
58g
Brake fluid bleeder bottle
9Y0161
• Bleeder Bottle Capacity: 0.5 L
50/10.0/11.0/3.0'
200g
Honda oil filter and clutch hub spanner
9Y0145
• Designed for oil filter and clutch hub on many Honda models (singlecylinder and twin-cylinder machines).
• 3/8" driver and 24mm inside diameter.
• Applications:m ost pre-1978CB, CL, CT, SL and XL models, XR200
1980-1984, XR200R 1981-1994, XR250L 1991-1994,
XR250R 1986-1995.
• Replaces large end of 077160020100 OEM tool.
240/12.5/14.5/1.6'
52g
Adjustable spanner wrench
9U0701
• For use on slotted retaining rings.
• Adjustable from 1/2" to 2-3/4".
48/16.1/17.1/1.1'
6-13
335g
Fixed type adjustable hook wrench
823
• For use on slotted retaining rings.
Part no.
823035
823050
823080
823120
Size 15-35 mm
35-50 mm
50-80 mm
80-120 mm
Packimg
60/6.6/7.6/1'
60/12.6/13.6/1'
40/17.0/18.0/0.9'
20/15/16/0.92'
g
110
210
425
750
Pin type adjustable hook wrench
• For use on slotted retaining rings.
Part no.
823A035
823A050
823A080
823A120
Size 15-35 mm
35-50 mm
50-80 mm
80-120 mm
Packimg
60/6.6/7.6/1'
60/12.6/13.6/1'
40/17.0/18.0/0.9'
20/15/16/0.92'
Internal snap ring pliers (long arm)
9U0102
• Special design for the retaining ring in the deep hole.
• The most deep size: 56mm.
48/9.5/11/2'
g
110
210
425
750
MOTORCYCLE
823A
198g
Stud extractor
818A
• Socket 1/2" DR. Stud Extractor.
• For remove threaded, stripped, rusted, broken and
smooth studs.
• Stud range: 6 - 19mm (1/4" - 3/4")
30/16.9/17.9/0.55'
560g
6-14
Hex nut driver T handle
774..A
blade over
g
pc/box
Part no.
77406A
77407A
77408A
77409A
77410A
774 11A
77412 A
77413 A
77414 A
77415 A
77416 A
77417 A
77418 A
77419 A
77420 A
77421 A
77422 A
77424 A
Tip
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
220
220
279
285
294
318
432
346
422
480
510
542
600
620
650
715
715
702
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
7741.4A
7745.16 A
7743.8A
7747.16 A
7741.2A
7749.16 A
7745.8A
7743.4A
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
300
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
220
279
294
318
342
422
510
620
10
10
10
10
10
10
10
5
g
pc/box
190
195
265
380
380
385
500
715
10
10
10
10
10
10
Hex nut driver adjustable T handle
774..B
Part no.
77407B
77408B
77410B
77412B
77413B
77414B
77417B
77422B
6-15
Tip
7
8
10
12
13
14
17
22
blade over
220
240
260
260
260
260
290
315
200
200
200
200
200
200
250
250
5
5
Tire lever
750
Part no.
750200
750300
750380
750380B
Packimg
100/14.6/15.60.56'
120/31.6/32.6/0.6'
60/22.9/23.9/0.5'
60/22.9/23.9/1.2'
Length
200
300
380
380
g
162
370
556
560
12pc 3/8”DR. Impact socket set
3126
82431
8043 075...150 MPB
80531MPB
80934MPB
435 8…19
Content:
1-Impact wrench
2-Impact extension 75, 150 mm
1- Universal joint (ball type)
1-Adaptor 3/8”(F)x1/2”(M)(ball type)
7-6pt. Flank impact socket
8, 10, 12, 13, 14, 17, 19 mm
6/15.6/16.6/1.54'
2600g
MOTORCYCLE
Part no.
6-16
3-Drawer chest with 97pcs tools(Motorcycle)
50223S-97
1/19.87/20.87/2.2'
14pc Utility set
Part no.
6044190
6046210
610B160
611B200
612B160
616200
61702
618
6983
750 300…380
88001
88423
9U3001
6-17
Content:
1-Pin punch 4mm (190mmL)
1-Safe pin punch 6(210mm)
1-Long nose pliers
1-Combination pliers 8"
1-Diagonal pliers 6"
1-Engineer hammer 200gw
1-Flexible magnet pick-up tool
1-20pcs Feeler gauge set
1-Technician's scissors 145mmL
2-Tyre lever 300mmL; 380mmL
1-Round magnetic tray
1-Car light tester Checks 6-24V system
1-Brass & Nylon scrape brushes
60pc Combination set
10pc Waterpump pliers & Screwdriver set
Part no.
Part no.
53546 08…14
12125 0…3
12225 0…3
12425 03…08
5071
766 10...40
5072
764 025…10
8013215
802214
80233
8033165
8043044…150
80531
8073 16M…
20.6M
81022M
Content: 1/4"& 3/8" DR.
16-6pt. Flank socket (MM)
8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 20; 21; 22; 24 mm
5-6pt. Flank socket (MM)
8; 10; 12; 13; 14 mm
4-Phillips bit PH.0; PH.1; PH.2; PH.3
4-Pozidriv bit PZ.0; PZ.1; PZ.2; PZ.3
6-Hex bit 3; 4; 5; 6; 7; 8 mm
7-Star key
T10; T15; T20; T25; T27; T30; T40
7-Hex key
2.5; 3; 4; 5; 6; 8; 10 mm
1-Swivel handle
1-Mini bit ratchet
1-Ratchet handle 24th
1-Sliding T bar
3-Extension
44mm(1.75")& 75mm(3") &
150mm(6")
1-Universal joint
2-Mag. Spark plug socket
16 & 20.6 mm
1-Magnetic bit holder
1/4"(F)x1/4"inhex
613B250
711 1B...3B
7112BS
713 04B…08B
713065BS
Content:
1-Waterpump pliers 10"
3-Phillips screwdriver
PH.1x80mmL; PH.2x100mmL;
PH. 3x150mmL
1-Stubby Phillips screwdriver
PH.2x25mmL
4-Slotted screwdriver
4mmx100mmL; 5.5mmx125mmL;
6.5mmx150mmL; 8mmx175mmL
1-Stubby slotted screwdriver
6.5mmx25mmL
13pc wrench set
MOTORCYCLE
535 08…24
Part no.
Content:
2-Double open end wrench
6x7; 8x10 mm
755 08...17
7-Combination wrench
8; 10; 11; 12; 13; 14; 17 mm
758 1012...2427 4-45° Offset ring wrench
10x12; 14x17; 19x22; 24x27 mm
754 0607...0810
6-18