ISSPRO Gauges - e-Power Instruments

Transcription

ISSPRO Gauges
Murphy Systems
Fleet Management
Enhanced Visibility Gauges
Pyrometers . . . . . . . . . . . . . . . . . .
Tachometers . . . . . . . . . . . . . . . . .
Mechanical Gauges . . . . . . . . . . . . . .
Electric Gauges . . . . . . . . . . . . . . . .
2
2
3
4
Specialty Instruments
ISSPRO Gauges
e-mail: e.power@sasktel.net Fuel Gauges & Senders . . . . . . . . .
Pyrometers . . . . . . . . . . . . . . .
Electric Gauges . . . . . . . . . . . . .
Mechanical Gauges . . . . . . . . . . .
Specialty Products . . . . . . . . . . .
Tachometers . . . . . . . . . . . . . .
Speedometers . . . . . . . . . . . . . .
1-800-667-8001
. . . 5
. 6 - 7
. 8 - 9
. . 10
11 - 13
14 - 15
16 - 20
e-Power Instruments Electrical
Heavy Duty Instruments
Electrical
Isspro
Enhanced Visibility Products
Enhanced Visibility Products |
3 White dished face dial, blue backlit numerals, illuminated blue pointer and
chromed brass low-profile bezel on Marine series.
Convex scratch-resistant glass lenses.
Antifog solution applied to inside of glass lenses.
All instruments frontally sealed.
All outer plastic parts are UV stabilized.
Glass filled white polyester case resists corrosion and vibration and augments
lighting, designed for superior night time viewing.
3 The mechanical pressure and temperature gauges, as well as the pitot speedometer, feature a phosphor bronze bourdon tube linked to a gear and pinion
arrangement for accurate indication.
3 Most gauges are for 12V DC operation. Unless otherwise specified.
3
3
3
3
3
Order No.
Mfg. PN
Description
Bulb Type
Price
Electrical Air Core Pyrometers - Thermocouples, Leadwires, sold on Page 7
E70150
R3707
2 1/16”, 100 - 1800oF Gas Engine
(2) T-5
$144.95
E70155
R3707G
2 1/16”, 100 - 1500oF Diesel Engine
(2) T-5
$144.95
3 3/8” Pitot Type Marine Speedo
Isspro supplies rugged, reliable, heavy-duty speedometers to OEM’s and now brings that
expertise to the marine market. A high-quality mechanical and microprocessor-based programmable speedometer is offered.
E70150 Pyrometer
100 - 1800oF Gas Engine
E07255
R6440
3 3/8”, 60 mph, No Odometer
2 Bulbs
$12995
3 3/8” Programmable Tachometers
This microprocessor-based instrument is designed to accept signals from pulse generators,
magnetic sensors and alternators. Unit features dip switch programming. Mounting hardware
and light kit included. 12 or 24V DC. NG operation.
E70155 Pyrometer
100 - 1500oF Diesel Engine
E02300
R6535M
0 - 3500 rpm
(2) T-6.5
$199.95
Ignition Tachometers
These tachometers are designed for most standard ignition systems that have a coil type ignition or
tach output connection. Applications are for 4, 6 or 8 cylinder four stroke engines. All units are 12 and
24V DC capable. Mounting hardware and light kit included.
E07255 0 - 60 mph
3 3/8” Speedometer
E05900
R6510
2 1/16”, 0 - 6000 rpm
(2) T-5
$164.95
E05910
R65100
3 3/8”, 0 - 6000 rpm
(2) T-6.5
$164.95
2 1/16” Diesel Tachometers
While these tachometers are designed for diesel systems, they will work with any two pulse/rev.
sender. All units are 12 and 24V DC capable. Mounting hardware and light kit included.
E05650
R6501
0 - 3000 rpm
(2) T-5
$171.95
E05655
R6503
0 - 4000 rpm
(2) T-5
$171.95
Sensor Kit, Replacement Magnet Kit
E02300 0 - 3500 rpm
3 3/8” Programmable Tachometer
E05900 0 - 6000 rpm
2 1/16” Ignition Tachometer
e-Power Instruments E15770
R8906
Sensor Kit
$69.95
E15720
R8911
Replacement Magnet Kit with Epoxy
$35.95
E05910 0 - 6000 rpm
E05650 0 - 3000 rpm
2 1/16” Diesel Tachometer
1-800-667-8001
E05655 0 - 4000 rpm
2 1/16” Diesel Tachometer
www.e-powerinstruments.com
Isspro Enhanced Visibility Products
2 1/16” Mechanical Gauges |
Order No.
Mfg. PN
Description
Bulb Type
Price
(1) T-10
$54.95
(1) T-10
$72.95
(1) T-10
$89.95
ISSPRO Gauges
Mechanical gauges sense pressure or temperature through tubing that transmits
the pressure, vacuum or temperature. Electricity required for operation is for night
lighting only. Senders are not needed for mechanical gauges. All mechanical gauges
have a 270o sweep.
Mechanical Oil Pressure Gauge
E67575
R6701
0 - 100 psi
R6705
0 - 150 psi
Mechanical Dual Air Pressure Gauge
E67620
R6706
0 - 150 psi
Mechanical Manifold Pressure Gauges
E67770
R6711
0 - 15 psi
(1) T-10
$67.95
E67775
R6710
0 - 40 psi
(1) T-10
$67.95
E67575 Oil Pressure
0 - 100 psi
Mechanical Turbo Boost Gauges
E67780
R6713
0 - 30 psi
(1) T-10
$61.95
E67785
R6723
0 - 60 psi
(1) T-10
$61.95
(1) T-10
$61.95
Mechanical Vacuum/Turbo Pressure Gauge
E67720
R6871
0 - 30” Hg - 0 - 25 psi
E67620 Dual Air Pressure
0 - 150 psi
Mechanical Water Temperature Gauges
E69540
R6730
100 - 265oF with 6’ Capillary
(1) T-10
$87.95
E69545
R6731
100 - 265 F with 12’ Capillary
(1) T-10
$98.95
(1) T-10
$98.95
o
Mechanical Oil Temperature Gauges
E69580
R6736
E67770 Manifold Pressure
0 - 15 psi
Fleet Management
E67615
Murphy Systems
Mechanical Air Pressure Single Gauge
E66950
R7110
Oil Pressure Tubing Kit 1/8” NPT 6’
$15.95
E66960
R7172
$19.95
E66970
R7111
Vacuum Tubing Kit 1/8” NPT 6’
$15.95
0 - 40 psi
E69545 Water Temperature
E67780 Turbo Boost
0 - 30 psi
E69580 Oil Temperature
E67720 Vacuum/Turbo Pressure
0 - 30” Hg - 0 - 25 psi
E67785 Turbo Boost
0 - 60 psi
Electrical
Pressure Tubing Kits
E6695 Oil Pressure Tubing Kit
1/8” NPT 6’
e-mail: e.power@sasktel.net 1-800-667-8001
e-Power Instruments Isspro Enhanced Visibility Products
2 1/16” Electric Gauges |
Electrical gauges are designed with a silicone dampened air core movement. A coil
of wire is wound around a bobbin with a center magnet. When an electrical current
is applied to the coil, the gauge pointer moves to the resulting electrical field. Wire,
electrical terminals and 12V DC from the vehicle are required for installation. 270o
sweep. Electrical gauges include amplifier and sender; this matched calibrated set
is required for operation.
Order No.
Mfg. PN
Description
Bulb Type
Price
Electrical Oil Pressure Gauges
Provided with signal amplifier and sender (matched set). Oil pressure sender is 1/8” NPT.
E67045 Oil Pressure
0 - 100 psi
E67045
R6721
0-100 psi,
(2) T-5
$122.95
Electrical Temperature Gauges
Provided with signal amplifier and sender (matched set). Supplied with 1/8” NPT temperature sender and 1/4”, 3/8”, 1/2” NPT adapters.
E69025 Temperature
100 - 240oF, Water
E69025
R6750
100 - 240oF, Water
(2) T-5
$122.95
E69045
R6754
140 - 320 F, Oil
(2) T-5
$127.95
E69050
R6756
140 - 320oF, Trans oil
(2) T-5
$127.95
o
Voltmeters
E70730
R6760
12V DC / 10 -16V DC
(1) T-10
$56.95
E70735
R6761
24V DC / 20 - 32V DC
(1) T10
$56.95
EV Replacement Bulbs
E69045 Temperature
140 - 320oF, Oil
Bulb Type
T-5
T-6.5
T-10
12V order by bulb type . . . . . . . . . . $ 1.39
12V
E50530
E50531
E50532
24V order by bulb type . . . . . . . . . . $ 1.95
24V
E70730 Voltmeters
12V DC / 10 -16V DC
E50533
E50534
E50535
Red
Black
White
Replacement Bulbs
Bezels
Size
Chrome
Blue
Brass
E50603
E50604
E50605
E50609
E50610
E50611
2 1/16” order by color. . . . . . . . . . . . . . . $3.25
2 1/6”
E50600
E50601
E50602
3 3/8” order by color. . . . . . . . . . . . . . . . $5.55
`
3 3/8”
E50606
E50607
E50608
E70735 Voltmeters
24V DC / 20 -32V DC
Bezels
e-Power Instruments 1-800-667-8001
Isspro Heavy Duty Instruments
Fuel Gauges & Senders |
Mfg. PN
Description
Price
ISSPRO Gauges
Order No.
Electric - Fuel Level Gauge
E70810
R9090
Fuel Level 0-4/4
$47.95
Float Arm Fuel Level Sender
Adjustable for use in tanks 5” to 27” deep
E70950
R8925
Fuel Level Sender
$53.95
RA9200 Series ultimate fuel level sender for volumetric (round/saddle) tanks. Specifically
calibrated for the cylindrically shaped tanks most commonly used on class 8 trucks. These
senders are ordered by the diameter of the fuel tank. Fluids measured: gas/diesel/biodiesel/
alcohol(ethanol)/hydraulic non potable water.
E70810 2 1/16” Fuel Level 0-4/4
Fuel Level Sender - order by outside diameter size. . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95
Order No.
Tank Outside Diameter
Order No.
Tank Outside Diameter
E70859
20”
E70860
22”
E70870
23”
E70880
24”
E70890
25”
E70900
26”
E70910
27”
R70920
28”
E70930
29”
RA9500 Series ultimate fuel level sender for non-volumetric (square/rectangular) tanks.
Fluids measured: gas/diesel/biodiesel/alcohol(ethanol)/hydraulic non potable water.
Fuel Level Sender - (6” to 19”) order by tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $66.95
Tube Length
Order No.
Tank Depth
Tube Length
E70820
6 1/2 - 7”
6”
E70822
8 1/2 - 9”
8”
E70821
7 1/2 - 8”
7”
E70823
9 1/2 - 10”
9”
E70824
10 1/2 - 11”
10”
E70825
11 1/2 - 12”
11”
E70827
12 1/2 - 13”
12”
E70827
13 1/2 - 14”
13”
E70828
14 1/2 - 15”
14”
E70829
15 1/2 - 16”
15”
E70830
16 1/2 - 17”
16”
E70831
17 1/2 - 18”
17”
E70832
18 1/2 - 19”
18”
E70833
19 1/2 - 20”
19”
RA9200 Series Ultimate
Fuel Sender
Fuel Level Sender - (20” to 29”) order by tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.95
E70834
20 1/2 - 21”
20”
E70835
21 1/2 - 22”
21”
E70836
22 1/2 - 23”
22”
E70837
23 1/2 - 24”
23”
E70838
24 1/2 - 25”
24”
E70839
25 1/2 - 26”
25”
E70840
26 1/2 - 27”
26”
E70841
27 1/2 - 28”
27”
E70842
28 1/2 - 29”
28”
E70843
29 1/2 - 30”
29”
Fuel Level Sender - (30” to 36”) order by tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $83.95
E70844
30 1/2 - 31”
30”
E70845
31 1/2 - 32”
31”
E70846
32 1/2 - 33”
32”
E70847
33 1/2 - 34”
33”
E70848
34 1/2 - 35”
34”
E70849
35 1/2 - 36”
35”
E70850
36 1/2 - 37”
36”
RA9500 Series Ultimate
Fuel Sender
Technical Tips
When ordering a tube-style sender,
it is important to know tank depth
and tank shape.
e-Power Instruments Electrical
Tank Depth
Fleet Management
E70950
Fuel Level Sender
RA9500 Series Ultimate Fuel Level Senders
Order No.
Murphy Systems
RA9200 Series Ultimate Fuel Level Senders
Isspro Pyrometers |
For over 50 years, Isspro has focused on pyrometers. Excessive heat is one enemy of the
turbocharger. The maximum input of a turbocharger is approximately 1400°F. Temperatures
above this will deteriorate the turbo housings, crack them and foul the compressor wheels,
intake and exhaust manifolds as well as cylinders will crack. A pyrometer is an exhaust
temperature gauge that allows you to read an immediate change in exhaust temperature by
receiving a temperature signal from a probe (thermocouple) that is inserted into the exhaust
manifold. This constant monitoring of temperature changes alerts the driver to temperature
problems well before indications would be received from a typical water temperature gauge.
Equipment operators use pyrometers to diagnose engine problems and drive more efficiently,
prolonging engine life and reducing fuel consumption.
Reduce fuel consumption
Save on engine wear
Avoid engine lugging as indicated by higher temperatures
Save on turbo wear by letting exhaust gas temperatures cool down
to safe temperatures before shutting down; thermocouple is normally
located after the turbo-charger
3 Upgrade your equipment; exhaust temperature gauges are now standard on most new vehicles
3
3
3
3
Standard Features of
Pyrometers:
To design your own pyrometer system, you will need:
3 Pyrometer. To choose the proper pyrometer, determine the temperature range (most diesel and gas engines range from 0-300 bottom end
of the scale to 1500-1800 top end of scale); and size of the mounting
hole. To determine your safe maximum exhaust temperature,
run a well-tuned engine at full rpm and horsepower on the inertia
dynamometer or under a loaded pull. Note the exhaust temperature
and subtract 200 degrees. This is your safe maximum exhaust
temperature. This temperature may be exceeded for a short period
and will not cause serious damage. Stay in the upper one third of
your temperature range as much as possible. Operation in the lower
range isn’t as critical as exceeding the maximum range.
3Leadwire. High temperature extension type leadwire available in 10’,
16’ and 20’ lengths. Aircraft quality Kapton leads are encased with a
flexible wire braid to protect them from heat and abrasion. When heat
is applied to the junction, a tiny voltage is produced and travels up the
leadwire to the gauge. It is important never to solder the leadwire, as
each solder joint will act as an additional junction generating voltage.
3 Thermocouple. Type K thermocouple with ¼” NPTF mounting.
Also available with a ¼” brass slip nut for easy depth adjustment. This
thermocouple produces – 1.63mV at 0°F and 26.03mV at 1200°F.
The thermocouple is the power source of the whole system. Two
different types of metal are induction welded together in the tip of
the thermocouple. The tip is made of stainless steel and is filled with
a ceramic material.
3 All pyrometers have red-orange
pointers
3 Black bezel
3 12V DC light kit and mounting
hardware included
3 For highest accuracy and long
life, do not mix components
from other manufacturers
within a pyrometer system
3 One-year warranty
Pyrometer Tester |
This tester is used as a
continuity checker for
testing leadwires and
thermocouples and for
checking pyrometers.
This eliminates guesswork by checking the
thermocouple and
leadwire continuity. It
allows you to run the
meter through the entire
scale to check its operation, thus diagnosing
the complete system in
minutes.
E88020 (R600) Pyrometer Tester........... $179.95
e-Power Instruments 1-800-667-8001
Isspro Pyrometers |
bezel
3 Red-orange pointers
3 12V DC light kit and mounting hardware included
Order No. Mfg. PN
ISSPRO Gauges
3 Black
Price
Description
0-1800°F/0-1000°C 250° Sweep
$179.95
R607VW
0-1500°F Color Coded Dial 250° Sweep
$179.95
E70090
R630
0-1990°F Digital Pyrometer
$319.95
E70050 2 1/6” Pyrometer
250° sweep
* Must be mounted after the turbo charger
2 ¾” Pyrometer
E70010
R602
0-1800°F/0-1000°C 100° Sweep
$179.95
3” Pyrometer
E70040
R606
0-1800°F/0-1000°C 250° Sweep
$179.95
E70070
R624
300-1500°F/0-800°C Dual Meters
$199.95
3” Turbocator
Dual Scales allow monitoring of exhaust temperature on the lower scale and turbo boost
pressure on the upper scale. Pressure tubing kit sold separately.
E70100
R609
300-1500°F/0-30 psi Turbo Boost
$239.95
E66990
R7120-10
Turbocator Tubing Kit
$ 19.95
E70080 2 1/6” Pyrometer
250° sweep, colored dial
Thermocouples (Type K)
2 ½” length, ¼” NPTF. Encased in flexible wire braid which protects from heat, reduces
kinking and increases flexibility. Resistant to exhaust fumes. Adjustable probe style has a slip
nut for easy depth adjustment from 0-2 ½”.
E70210
R650
Universal Thermocouple
$69.95
E70260
R658
Adjustable Thermocouple
$69.95
E70090 2 1/6”
Digital Pyrometer
Weld Bushing
Weld bushing on to exhaust tube to give a ¼” NPT connection to mount E70210 or E70260
thermocouple.
E70310
R680
Weld Bushing
$5.95
E70010 2 ¾” Pyrometer
100o sweep
Leadwires
Coaxial cable-type leadwire. When used with pyrometer thermocouple, ensures an accurate
reading at all times. Available in 10’, 16’ and 20’ lengths.
R660-10
10’ Leadwire
$29.95
E70380
R660-16
16’ Leadwire
$35.95
E70390
R660-20
20’ Leadwire
$39.95
E70040 3” Pyrometer
250° sweep
E70100 3” Turbocator
E70070 3” Dual Pyrometer
Electrical
E70370
Fleet Management
R607
E70080 *
E70050
Murphy Systems
2 1/16” Pyrometers
E70210 ¼” NPTF
Universal Thermocouple
E70310 ¼” NPTF
Weld Bushing
e-mail: e.power@sasktel.net E70370/E70380
10’/16’ Leadwire
1-800-667-8001
e-Power Instruments Isspro Heavy Duty Instruments
Isspro 2 1/16” Electric Gauges, Senders |
3 Black
bezel
3 2 1/16” mounting hole
3 12V DC light kit and mounting hardware included
3 90° Sweep
E67010 Oil Pressure
0-80 psi
Electrical gauges are designed with a silicone dampened air core movement. A coil
of wire is wound around a bobbin with a center magnet. When an electrical current
is applied to the coil, the gauge pointer moves to the resulting electrical field. These
gauges require a sender; the senders must match the gauge type code and range.
Also required for an application is wiring with electrical ring terminals that provide
12V DC and ground. English/metric gauges have an orange pointer; English only
have a white pointer.
Order No.
Mfg. PN
Description
Price
Electric Oil Pressure Gauges
E67020 Oil Pressure
0-80 psi/0-550 kPA
E67010
R8620
Oil Pressure 0-80 psi
$47.95
E67020
R9020
Oil Pressure 0-80 psi/0-550 kPA
$47.95
E67030
R8621
Oil Pressure 0-100 psi
$47.95
E67040
R9021
$47.95
Electric Air Pressure Gauges
E67050
R9023
Air Pressure 0-150 psi/-1030 kPA
$47.95
E67055
R8723
Air Pressure 0-150 psi
$47.95
Electric Pressure Senders
E67030 Oil Pressure
0-100 psi
Standard pressure sender has one terminal and is designed to drive one gauge.
The ground connection is made through the body of the sender.
E68010
R8916
Pressure Sender 1/8” NPTF 0-80 psi
$47.95
E68030
R8917
$47.95
E68020
R8919
$47.95
Electric Water Temperature Gauges
E67040 Oil Pressure
0-100 psi/0-700 kPA
E69010
R8650
Water Temperature 100-240°F
$47.95
E69020
R9050
Water Temperature 100-240°F/40-115°C
$47.95
Electric Water Temperature Senders
Standard temperature sender has one terminal for the gauge and grounding
is through the body of the sender.
E67050 Air Pressure
0-150 psi/0-1030 kPA
E67055 Air Pressure
0-150 psi
e-Power Instruments E69210
R8920
Temperature Sender ½” NPTF 100-240°F
$35.95
E69220
R8921
Temperature Sender 3/8” NPTF 100-240°F
$35.95
E69230
R8922
Temperature Sender ¼” NPTF 100-240°F
$35.95
E69240
R8923
$35.95
E69210 Temperature Sender
½” NPTF, 100-240°F
E68030 Pressure Sender
1/8” NPTF, 0-100 psi
1-800-667-8001
100-240°F
100-240°F/40-115°C
Ordering information:
These gauges require a sender, the senders must match the gauge type code and range.
Ammeters and voltmeters do not require a sender.
n Also required for an application is wiring and ring terminals.
n For 24V DC NG systems, a voltage reducer must be used if you do not have a 12 volt
system, with the exceptions of ammeters, hourmeters and voltmeters. Voltage reducers
are listed on Page 13.
Order No.
Mfg. PN
Description
ISSPRO Gauges
n
Price
Electric Oil Temperature Gauges
E69030
R8654
Oil Temperature 140-320°F
$47.95
E69040
R9054
Oil Temperature 140-320°F/60-160°C
$47.95
$23.95
E69250
R8960
Temperature Sender ¼” NPTF 140-320°F
$23.95
E69260
R8961
$23.95
E69270
R8962
Temperature Sender ½” NPTF 140-320°F
$23.95
140-320°F
Ammeter Gauges
E70760
R9066
60-0-60 Ammeter
$47.95
E70770
R9067
100-0-100 Ammeter
$47.95
Voltmeter Gauges
E70710
R9080
2 1/16”, 12V Voltmeter
$47.95
E70720
R8661
2 1/16”, 24V Voltmeter
$47.95
140-320°F/60-160°C
2 1/16” Hourmeters
Hourmeters are connected in parallel with the electrical equipment or machine where operation
time is to be recorded. All hourmeters feature fully insulated plastic case, clamp clip for quick
mounting, square or round panel cutout insertion. Counts up to 99,999 hours. Simply apply a
battery voltage between 8 and 40V DC and hourmeter starts counting. Digital hourmeter is stateof-the-art design in the most compact package available. Complete with solid-state memory that
does not lose its readings even when the voltage is removed. Operates on 9-39V DC. Black bezel.
E84050
R8861
Round DC Hourmeter
$59.95
E84110
R8865
Digital Hourmeter
$59.95
E69270 Temperature Sender
½” NPTF 140-320°F
Rectangular Mini Hourmeter
E84100
R8864HV
Rectangular DC Hourmeter
$59.95
E70770 Ammeter
100-0-100
Electrical
E84100
Rectangular DC Hourmeter
E70760 Ammeter
60-0-60
Fleet Management
R8959
E69280
Murphy Systems
Electric Oil Temperature Senders
E84110
Digital Hourmeter
e-mail: e.power@sasktel.net E84050
Round DC Hourmeter
E70710 Voltmeter
12V
1-800-667-8001
E70720 Voltmeter
24V
e-Power Instruments Isspro Heavy Duty Instruments
Isspro 2 1/16” Mechanical Gauges |
Mechanical gauges sense pressure or temperature through tubing that transmits
the pressure, vacuum, or temperature. Electrical power is required for operation of
night lighting only. Senders are not needed for mechanical gauges. All gauges are
2 1/16” mounting hole, black bezel.
Order No.
Mfg. PN
Description
Price
Mechanical Oil Pressure Gauges
E67510
R9000
$59.95
E67520
R9001
$59.95
E67550
R9008
Drive Oil Pressure 25-400 psi
$69.55
Air Pressure & Dual Air Pressure Gauges
E67510 Oil Pressure
5 - 80 psi
E67600
R9005
Air Pressure 10-150 psi/100-1050 kPA
$69.95
E67610
R8606
Dual Air Pressure 0-150 psi
$143.95
Manifold Pressure Gauges
E67650
R9010
Manifold Pressure 2-30 psi/13-207 kPA
$69.95
E67660
R8611
Manifold Pressure 1-15 psi
$69.95
Vacuum 0-30” Hg
$69.95
Vacuum Gauge
E67520 Oil Pressure
5 - 100 psi
E67700
R8675
Axle Load Gauges
E94310
R8821
0-45 x 1000 Axle Load
$83.95
E94320
R8820
0-55 x 1000 Axle Load
$83.95
Pressure Tubing Kits
E67550 Drive Oil Pressure
25 - 400 psi
E66950
R7110
$15.95
E66960
R7172
$19.95
E66970
R7111
Vacuum Tubing Kit 1/8” NPT 6’
$15.95
Mechanical Water Temperature Gauges
E69510
R9034
100-265°F/40-130°C 4’ Capillary
$83.95
E69520
R9030
100-265°F/40-130°C 6’ Capillary
$83.95
Mechanical Oil Temperature Gauges
E67600 Air Pressure
10 - 150 psi
E69550
R8636
140-325°F 12’ Capillary
$107.95
E69560
R9036
140-325°F/60-160°C 12’ Capillary
$107.95
E67610 Dual Air Pressure
0 - 150 psi
2 - 30 psi
1 - 15 psi
E69510/E69520 Water
Temperature 100 - 265°F
E67700 Vacuum
0 - 30” Hg
E94310 Axle Load
0 - 45 x 1000
140 - 325°F
140 - 325°F/60 - 160°C
10 e-Power Instruments 1-800-667-8001
Isspro Specialty Products |
Mounting Hardware for Standard Gauges
All mounting brackets and cups are black and available for the 2 1/16”, 3”, and 3 3/8” gauges.
E34510
R7610
2 1/16” Single Hole Bracket
$ 9.95
E34520
R7620
2 1/16” Dual Hole Bracket
$10.95
E34540
R7602
2 1/16” Mounting Cup
$41.95
E34530
R7608
3” Single Hole Bracket
$35.95
E34550
R7680
3 3/8” Single Hole Bracket
$27.95
E34560
R7601B
3 3/8” Mounting Cup
$47.95
E34510 2 1/16” Single Hole
Order No.
Make/Year
Pillar/Pod
Price
Mounting Hardware for 2 1/16” Standard Gauges
ISS-R7700 Ford F series 92-97
dual pillar
$129.95
triple pillar
$129.95
ISS-R7702 Ford F series 98-01 & F-150 97
dual pillar
$129.95
ISS-R7703 Ford F series 98-01 & F-150 97
triple pillar
$137.95
ISS-R7704 Dodge Ram 94-97
dual pod
$129.95
ISS-R7705 Chevy GM full size 88-94
dual pod
$129.95
ISS-R77000 Dodge Ram 98-01 & Ram 2500/3500 02
dual pillar
$129.95
ISS-R77001 Ford F series 02 & F-150 03
dual pillar
$129.95
ISS-R77002 Dodge Ram w/speaker 98-02 & Ram 2500/3500 02
dual pillar
$129.95
dual pillar
$129.95
ISS-R77004 Chevy GM full size w/ speaker 03-04
dual pillar
$137.95
triple pillar
$129.95
quadruple pillar
$163.95
triple pillar
$137.95
triple pillar
$137.95
dual pillar, lt gray
$163.95
triple pillar
$137.95
triple pillar, lt gray
$163.95
dual pod
$74.95
ISS-R7707 Ford Super Duty 99-04
triple pillar
$137.95
dual pod
$137.95
ISS-R77007 Dodge Ram w/speaker 98-02
Murphy Systems
ISSPRO Gauges
Price
Description
E34520 2 1/16” Dual Hole
E34540 2 1/16” Mounting Cup
E34530 3” Single Hole
Fleet Management
Mfg. PN
Order No.
Electrical
E34550 3 3/8” Single Hole
ISS-R77001 Dual Pillar
Ford F series 02 & F-150 03
e-mail: e.power@sasktel.net ISS-R77010 Dual Pod
Dodge Ram 03-04
ISS-R77011 Triple Pillar
Dodge Ram 03-04
1-800-667-8001
E34560 3 3/8” Mounting Cup
e-Power Instruments 11
Isspro Specialty Products |
Order No.
Mfg. PN
Description
Price
Oil & Air Pressure Switches
These switches are designed with normally open (NO) or normally closed (NC) contacts. When
the set limit is reached, the contacts will close or open to ground completing circuit. The dual
pressure switch has two sets of isolated contacts—one set normally open (NO) and one set
normally closed (NC). 1/8” NPTF on all pressure switches.
E81660 Pressure Switch
NO 4 psi
NC 8 psi
NC 15 psi
E81690 Dual Pressure Switch
NO/NC 4 psi
E81660
R7504
Pressure Switch NO 4 psi
$47.95
E81670
R7508
Pressure Switch NC 8 psi
$47.95
E81680
R364K
Pressure Switch NC 15 psi
$47.95
E81690
R4012-4
Pressure Switch Dual NO/NC 4 psi
$47.95
Temperature Switches
All temperature switches are normally open (NO) and have a one Amp capacity. Rugged
and reliable for indicator lights, relays, hourmeters, alarms, etc.
E81830
R363F
Temperature Switch 200°F NO ½” NPTF
$47.95
E81840
R363B
$47.95
E81870
R363G
$47.95
E81880
R363A
Temperature Switch 250°F NO ¼” NPTF
$47.95
Turbo Temperature Module
This module can help eliminate early turbo charger failure. When the engine ignition is turned
off, the turbo temperature monitor takes over and idles down until a safe exhaust temperature is
reached. At that point the engine automatically stops. By shutting down in a safe, cool condition,
deposits are reduced and turbo life is increased. A leadwire and thermocouple are needed
for a functioning system. Your existing pyrometer system can be used or a new leadwire and
thermocouple can be installed. See Page 7.
E18800
R4130
$299.95
Engine Shutdown without Gauges
This shutdown kit is recommended if your equipment has factory-installed instruments making
the gauges in a shutdown panel redundant, or if the equipment articulation is such that mechanical installation is physically impossible. The Isspro shutdown kit is a solid state shutdown with
delay. The relay is built to handle heavy switch loads such as fuel solenoids. Includes shutdown
box (30 second delay), low water probe, low oil pressure switch (7-9 psi), high water temperature
switch (225°F), warning label, warning light, and buzzer with 15 second delay for engine start.
E21040
R4020-12V
Shutdown Kit 12V
$299.95
E21041
R4020-24V
Shutdown Kit 24V
$359.95
E81830 Temperature Switch
200°F NO ½” NPTF
250°F NO ¼” NPTF
12 e-Power Instruments Turbo Temperature Monitor
E18800 Turbo
Temperature Module
1-800-667-8001
E21041 Shutdown Kit 24V
Specialty Products |
Mfg. PN
Description
Price
ISSPRO Gauges
Order No.
24 to 12V Gauge Voltage Reducer
The voltage reducers is designed to allow the use of 12V DC Isspro gauges in 24V DC
vehicles.It is not designed for light bulb applications.
E70640
R7934
24V Voltage Reducer
$22.95
Interconnect Harnesses
E50650
R7032
Peterbilt PN’s: 17-03552-001, 17-03552-002 for E02050.
Kenworth PN’s: 3k tach with or without hourmeter for E02050.
$25.95
E50651
R7034
Peterbilt PN’s: 17-03183 for E02050.
$25.95
E50652
R7036
Navistar PN’s: 1682071C91 for Isspro, unit E02250.
$25.95
E50653
R7038
Kenworth K152-473-1 for Isspro unit E02260.
$32.95
E70640 24V to 12V
Gauge Voltage Reducer
Murphy Systems
For installation of Isspro speedometers and tachometers in original electronic equipment
applications.
Universal Gauge Lighting, 12 - 24V DC
R7093
Gauge Light Kit, 2 wire, 9 /16” & 5/8” mounting diameter.
For a 12V DC, GE161 or 24V DC GE656 Bulb.
$6.95
E50541
R7094
Wedge Base Light, twist in assembly.
For a 12V DC, GE161 or 24V DC GE656 Bulb
$4.95
E50542
GE161
12V DC Bulb
$2.95
E50543
GE656
24V DC Bulb
$2.95
Buzz Light Alarm
E50550
4112-RC
12V Buzz Light
$47.95
E50555
4124-RC
24V Buzz Light
$47.95
Interconnect Harness
R7093 Gauge Light Kit
Fleet Management
E50540
A two-stage audible alarm which can be used as a steady tone or a pulsed tone. Unit has 3
terminals, operates on 6-28V DC. Requires a 1 1/8” hole size.
E29710
SAH-A
Audible Alarm
$47.95
Pilot Light Alarm
This heavy-duty 12V DC bright light assembly has a removable red lens for easy lamp replacement. Easy to see in bright conditions. Requires a ¾” hole for mounting.
E50560
PL-118-RC
Pilot Light
R7094 Wedge Base Light
$29.95
Audible Alarm
Electrical
E50550 Buzz Light Alarm
E50560 Pilot Light Alarm
E29710 Audible Alarm
Tachometers |
3 3/8” Mechanical Tachometers with Hourmeter
These Isspro mechanical tachometers with hourmeter are cable driven, rugged and reliable
for new installations or replacement applications. Requires a steel cable driven by the
diesel engine fuel pump. Black bezel with white pointer, 12V DC complete with light and
mounting hardware. Available in .5:1 and 1:1 ratio.
E06120
0 - 3500 rpm Mechanical Tachometer .5:1 ratio
$149.95
E06130
0 - 3500 rpm Mechanical Tachometer 1:1 ratio
$149.95
3 3/8” Electronic Tachometer Kits
E06120/E06130
0-3500 rpm Mechanical
E04200 0-2000 rpm
Tachometer
Developed to provide users with an easy-to-read instrument that accurately measures rpm.
Can be used on engine, fan, pump, conveyor, PTO, etc. Standard 3 3/8” gauge, with rear
terminal strip, 12V DC operation. All kits include an Isspro 3 3/8” black bezel gauge, steel
mounting case, bracket, E15770 sensor kit, and installation instructions.
E04200
0 - 2000 rpm Tachometer Kit
$275.95
E04300
$275.95
E04400
$2275.95
E04500
$275.95
E04600
$275.95
3 3/8” Electronic Tachometer Kits with Hourmeter
Universal electronic tachometer kit with hourmeter. For all 12V DC systems negative ground.
Excellent for replacing obsolete mechanical tachometer systems. Kit includes an Isspro
3 3/8” black bezel gauge with hourmeter, E15770 sensor kit, and installation instructions.
E04700
$275.95
E04800
$275.95
3 3/8” Low rpm Electronic Tachometer Kit with Mounting Cup
This kit will allow you to monitor slower rotating shafts consistently. Range 0-500 rpm. Kit
includes 3 3/8” Isspro tachometer 0-500 rpm, multi-tooth sprocket with 1 5/8” weld-on-hub
hole, rear terminal strip for easy wiring, steel mounting cup open mounted for 12V DC.
E04300 0-3000 rpm
Tachometer
E04050
$319.95
Sensor Kit, Replacement Magnet Kit
Kit includes sensor pickup, 2 magnets, and epoxy. Mount the two magnets to front of engine
pulley and sensor to a pan bolt.
E04400 0-4000 rpm
Tachometer
E15770
Sensor Kit
$69.95
E15720
Replacement Magnet kit with Epoxy
$35.95
E04500 0-5000 rpm
Tachometer
E04700 0-3000 rpm
Tachometer
E04600 0-6000 rpm
Tachometer
E04800 0-4000 rpm
Tachometer
14 e-Power Instruments E04050 0-500 rpm
Tachometer
E15770 Sensor Kit
1-800-667-8001
E04050 0-500 rpm
Multi-Tooth Sprocket
E15720 Magnet Kit
Tachometers |
ISSPRO Gauges
2 1/16” Electronic Tachometers
These Isspro tachometers are used in small engine applications such as the 6.2/6.5 liter
GM Diesel, 6.9/7.3 Ford Diesel and Dodge/Cummins. All tachometers use the E15770
Sensor Kit (sold separately); 12V DC only, black bezel with red-orange pointers, complete
with light and mounting hardware. To install sensor, mount two magnets to front engine
pulley and sensor to pan bolt.
E05510
2 1/16”, 0 - 4000 rpm Tachometer Kit
$189.95
E05550
$189.95
E05610
$189.95
3 3/8”, 0 - 3000 rpm Programmable Tachometer with Hourmeter
$235.95
E02200
3 3/8”, 0 - 4000 rpm Programmable Tachometer with Hourmeter
$235.95
E02250
4 5/8”, 0 - 3500 rpm Programmable Tachometer
$329.95
E02260
5”, 0 - 3000 rpm Programmable Tachometer
$329.95
Electronic Ignition Tachometers (Hourmeters)
These Isspro tachometers are designed for most standard ignition systems that have a
coil-type ignition or tach output connection. For 4, 6, or 8 cylinder applications. 12 or 24V
DC, operation on 3 3/8” aircore units, 12V DC only on 2 1/16” units. All models have a black
bezel with white pointer, complete with light and mounting hardware. Models E05810 and
E05820 have hourmeters.
E05710
2 1/16”, 0 - 5000 rpm Tachometer
$189.95
E05810
3 3/8”, 0 - 4000 rpm Tachometer with Hourmeter
$235.95
E05820
3 3/8”, 0 - 6000 rpm Tachometer with Hourmeter
$235.95
Digital Photo/Contact Tachometer
This multi-function, one instrument combination Photo Tach (rpm) and Contact Tach (rpm,
m/min, ft/min) gives you a digital readout with a range from 0.5 to 100,000 rpm. The last
value/max., value/min., value will be automatically stored in memory and can be obtained
by pressing MEMORY CALL BUTTON. Highly visible, LCD display gives exact rpm with no
guessing or errors. The use of durable long-lasting components, including a strong, light-weight
ABS plastic housing assures maintenance free performance for many years. The detecting
distance is 2” to 6” with a typical maximum of 12”, depending on ambient light. The accuracy is
± 0.05% + 1 digit. Includes carrying case, 24” reflective tape, rpm adapter (cone), rpm
adapter (funnel), surface speed wheel, and operation manual. Uses 2 AA batteries (not
included). One-year warranty.
E86580
Photo/Contact Tachometer
$389.95
E86570
24” Reflective Tape
$ 7.95
E05550 0-5000 rpm
2 1/16” Tachometer
E05610 0-6000 rpm
E02050 0-3000 rpm
Fleet Management
E02050
E05510 0-4000 rpm
These Isspro programmable tachometers accept signals from pulse generators, magnetic
pickups, and alternator taps (sold separately on Page 18). Black bezel, 12 or 24V DC,
complete with 12V bulb and mounting hardware.
Murphy Systems
Electronic Programmable Tachometers
Electrical
E02200 0-4000 rpm
E86580 Photo/Contact
Tachometer
e-mail: e.power@sasktel.net E05710 0-5000 rpm
E05810 0-4000 rpm
1-800-667-8001
E05820 0-6000 rpm
Speedometers - Accessories |
3 3/8” Programmable Speedometers
Programmable 3 3/8” speedometers with odometer are driven electronically from either a
pulse generator or magnetic pickup. Functions over a broad range of applications by using
the dip switches for field programmability. For replacement applications, they will accept
signals from most sensors or generators in use.
E07015 Speedometer
30 mph/50 kph
E07010
Speedometer 140 kph
$259.95
E07015
Speedometer 30 mph/50 kph
$259.95
E07070
Speedometer 80 mph/130 kph
$259.95
Digital Ratio Converter
This digital pulse ratio converter scales an incoming frequency by a fixed ratio. It is intended
for functions such as speedometer or tachometer adjustment. Accepts pulses of a minimum
amplitude 0.8V. Produces 4V bipolar or unipolar output pulses. Programmed by a bank of
8 DIP switches and a removable jumper for selecting a high or low range.
E18520
E07010 Speedometer
140 kph
Ratio Converter
$155.95
Magnetic Sensors
A permanent magnet built into the sensor provides a magnetic field at the base of the sensor. As each tooth of a signal gear or a slot in a rotating sensor disc passes through the
magnetic field, a signal (voltage pulse) is generated.
E07070 Speedometer
80 mph/130 kph
E15430
Magnetic Sensor 3/4” - 16 thread, 2” long
$64.95
E15530
Magnetic Sensor 3/4” - 16 thread, 2.5” long
$64.95
Pulse Distribution Module
This module solves problems caused by attaching multiple instruments to one magnetic
speed sender or pulse generator. It accepts your existing speedometer or tachometer
signal and will boost and isolate it into five separate outputs. These can be used to drive
speedometers, on-board computers, cruise control, taximeters and other devices that use the
signal without weak or intermittent signals and interference. 12V DC. For 24 volt order
E15530 Sensor 2.5”
E18510
E15430 Sensor 2”
Pulse Distribution Module
$119.95
Electronic Ratio Adapter
This device helps obtain speedometer accuracy affected by tire size and rear end ratio
changes. Instructions help you calculate percentage of increase or decrease necessary
to correct the speedometer accuracy. DIP switches are then set to adjust the signal and
calibrate the speedometer. Wiring is 12V DC keyed on/off, ground, input signal from magnetic
sensor or signal generator and output signal to the speedometer.
E18515
Electronic Ratio Adapter
$325.95
E18520 Ratio Converter
E18510 Pulse Distribution Module
16 e-Power Instruments E18515 Electronic Ratio Adapter
1-800-667-8001
ISSPRO Gauges
Pulse Generators (30 Pulses/Rev) |
The pulse generator type sender is used when converting a mechanical speedometer system to an
electronic speedometer system. 30 Pulses/Rev, 7/8” – 18 thread.
E08050
Pulse Generator (One male drive tip required)
$125.95
E08100
Pulse Generator with Feed Through
$185.95
Drive Tips (For the 30 Pulses/Rev Generator) |
$12.95
E08520 .187” Tang - Male
Murphy Systems
E08510 .152” Tang - Male
E08050
Pulse Generator
$12.95
$12.95
E08540 .104” sq. - Male
$12.95
E08590 .150” sq. - Male
$12.95
E08550 .203” Tang - Female
$12.95
E08560 .104” sq. - Female
$12.95
$12.95
$12.95
E08530 .203” Tang - Male
Fleet Management
E08100 Pulse Generator
with Feed Through
Electrical
Microprocessor Product Information
A quick comparison of analog and microprocessor gauges:
Analog Positives: Microprocessor Positives:
3 Can be modified for infinite variations.
3 No need to adjust.
3 Can be adjusted so that two gauges are
3 Very stable over time and temperature.
identical (tachometer only). 3 Faster response.
3 No RF noise generated. 3 Handles larger range of pulses per mile.
3 Very accurate odometer and hourmeter information.
Analog Negatives: Microprocessor Negatives:
3 Limited in high pulses per mile. 3 Generates RF interference.
3 Limited in lower pulses per mile.
Pulse Generators |
This style of pulse generator has 8 Pulses/Rev
E08010 Pulse Generator $95.95
7/8” – 18 and 5/8” - 18 male thread
5/8” – 18 male thread
5/8” – 18 male thread both sides
Call us!
E08380 Adapter 2” length, $44.95
5/8” to 7/8” – 18 thread
E08390 Adapter 1.37” length, $34.95
5/8” to 7/8” – 18 thread
Did you know that
e-Power can manufacture
speedo and tachometer
cables? Call
1-800-667-8001
for details.
Pulse Generator Drive Tips
for use with the E08380
2” Coupling Adapter
E08910 .187” dia. to .104” sq. $14.95
E08930 .203” dia. to .104” sq.
$14.95
E08720 .104” sq. to .104” sq.
$5.95
E08920 .156” dia. to .104” sq.
$14.95
E08740 .156” dia. to .104” sq.
$5.95
Pulse Generator Drive Tips
for use with the E08390
1.37” Coupling Adapter
18 e-Power Instruments 1-800-667-8001
Ratio Adapters |
Output rotates same direction as input on all models.
All models are available in 250 different ratios.
Please specify input and output drive tip sizes when ordering.
ISSPRO Gauges



$ 97.95
E08240 600 Series Offset
$ 97.95
E08251 800 Series Offset
$ 97.95
$ 97.95
E08253 800 Series Dual
$124.95
Straight-thru output is always 1:1 ratio.
Offset output is the selected ratio
E08254 800 Series Dual
$124.95
Both outputs are the same selected ratio
E08810 .172” dia. to .104” sq.
$5.95
E08830 .172” dia. to .124” sq.
$6.95
Drive Tips
DRIVE
TIPS
$5.95
E08870 .172” dia. to .187” sq.
$6.95
E08840 .172” dia. to .156” dia.
$5.95
E08850 .172” dia. to .187” dia.
$5.95
E08860 .172” dia. to .203” dia.
$5.95
E09010 Tang to .104” sq.
$6.95
E09020 Tang to .152” sq.
$6.95
E09030 Tang to .187” sq.
$6.95
E09040 Tang to .152” pin
$6.95
$6.95
$14.95
E09070 .104” sq. to .203” pin
$6.95
Electrical
E08820 .172” dia. to .150” sq.
E08252 800 Series Straight-Thru
Fleet Management
Murphy Systems
E08230 700 Series Straight-Thru
Adapter Keys |
1 3/4”



E08670 .105” internal sq. to .104” sq. $ 5.95
1

E08680 .156” dia. to .203” dia.
1 5/16”

$12.95



E08710 .150” dia. to .104” sq.
$ 5.95
1


1 9/32”

E08720 .104” sq. to .104” sq.

7/8”
$ 5.95

1 1/8”

E08660 .187” dia. to .187” dia.
1 6/16”

$ 5.95

E08740 .156” dia. to .104” sq.

$ 5.95
1 7/16”

PHOTO NOT AVAILABLE
E08690 .105” internal sq. to .104” sq. $ 5.95
1 5/16”


E08620 .150” dia. to .104” sq.
E08730 .156” dia. to .187” internal sq. $ 5.95

1 1/8”

E08610 .156” dia. to .156” dia. 
1 1/8”
$ 6.95

$ 9.95
E08640 .203” dia. to .187” dia.
$ 5.95
E08650 .187” dia. to .156” dia.
$ 6.95
E08750 .105” internal sq. to .104” sq. $12.95
E08910 .187” dia. to .104” sq.
$14.95
E08920 .156” dia. to .104” sq.
$14.95

9/10”

E08930 .203” dia. to .104” sq.
$14.95
Warranty
Isspro does warranty its products against defects and workmanship.
This warranty shall extend from the date of purchase as follows:
20 e-Power Instruments 3Analog gauges, 2 years.
3All other Isspro products, 1 year.
1-800-667-8001

ISSPRO Gauges - e-Power Instruments

Transcription

Similar documents

AeroForce Dual Interceptor Gauge (05

Johnny Tremain by Esther Forbes Objectives

engines - Yamaha

official press kit 2015

one day deals - Salisbury Supply

45 Plateau Incentive Program

Campus Cruiser - Digital Commons @ Trinity

View Full Screen

RS Series Brochure

shafless screw