Series IHG - Induction heater units

Series IHG - Induction heater units
Fast and easy removal of parts on vehicles by applying heat
Induction heater units
Quality
made in
Europe
IHG 1500 – induction heater unit
Application
·· Removing minor dents caused by hail without corroding the paintwork
·· Removing small trim panels
·· Detaching and removing sealing compound
and polyfilla
·· Extremely versatile for bodywork and work
on commercial vehicles thanks to an ample
range of accessories (additional accessories
available separately)
·· Easy to transport due to compact dimensions and low weight of only 4.5 kg
For heating and looLoosening parts that are
sening jammed and
hard to access by using a
special type of twisted wire corroded parts
Model
Article no.
€ plus VAT
Removing rust
IHG 1500
6400015
729.00
Technical Data
Power supply
Mains frequency
Power consumption
Output
Fuse
Degree of protection
Output frequency
Dimensions (L x W x H)
Weight including accessories
Device weight
1
Easily removing small
trim panels
·· Treating jammed and corroded parts, such
as screws, lugs, seals, hinges, nuts, etc.
·· Also suitable to heat and loosen parts that
are hard to access (e.g. axle components,
ball joints, sensors, etc.), providing a special
type of twisted wire is used in the process
230 V
50/60 Hz
1.5 kVA
16 A
IP21
25 - 60 kHz
200 x 75 x 140 mm
Only 4.5 kg
Control concept
·· Targeted, precisely metered and exactly
positioned application involving the required amount of heat within seconds thanks
to cutting-edge microprocessor technology
·· Heats up parts to over 800°C
·· Fast and easy operation
4.5 kg
2
1
2
3
IHG 1500 delivery scope in black case:
IHG 1500 with coil holder, 1 M 8 side coil,
3 1 twisted wire, 4 helical coil
2
IHG 1500 - ample range of accessories included in the delivery scope
(illustration in the bottom left)
M10 side coil,
3
4
·· Prevents overheating and maintains a high
degree of efficiency thanks to two fans
·· High degree of operational safety with automonitoring feature and on-screen status
messages
Accessories
Front coil (L = 220 mm) M6 (15)
Front coil (L = 220 mm) M8 (19)
Front coil (L = 220 mm) M8 (20)
Front coil (L = 220 mm) M10 (23)
Front coil (L = 220 mm) M12 (26)
Front coil (L = 220 mm) M16 (32)
Front coil (L = 220 mm) M20 (38)
Front coil (L = 220 mm) M22 (45)
Side coil (L = 220 mm) M6 (15)
Side coil (L = 220 mm) M8 (19)
Side coil (L = 220 mm) M8 (20)
Side coil (L = 220 mm) M10 (23)
Side coil (L = 220 mm) M12 (26)
Side coil (L = 220 mm) M16 (32)
Side coil (L = 220 mm) M20 (38)
Side coil (L = 220 mm) M22 (45)
Focus - coil with diameter = 20 mm
Twisted wire with L = 1,000 mm
(Flexible heating coil)
Flat helical coil (PAD coil)
User-defined heating coil (L=750mm, D=4mm)
Article no.
6411015
6411019
6411020
6411023
6411026
6411032
6411038
6411045
6411115
6411119
6411120
6411123
6411126
6411132
6411138
6411145
6411004
6411003
6411002
6411001
Function and benefits of the induction principle for bodywork and work on commercial vehicles
Function:
The induction heater unit and its accessories
exclusively apply non-contact, targeted heat in
areas where it is actually necessary. Based on the
principle that electromagnetic induction works
with conductive materials only so that non-conductive surfaces (such as glass, rubber, plastic,
painted surfaces, etc.) are not heated up to prevent damage on said components. Open flames
2
are no longer required and hence the linked fire
risk has been almost entirely eliminated.
Application and benefits:
·· Fast and easy removal of parts on vehicles by
applying heat, e.g. glass, trim panels, stickers,
foil, etc.
·· Targeted, precisely metered and exactly positioned application with the required amount
of heat within seconds thanks to cutting-edge
microprocessor technology
·· Complete protection of the surrounding areas
and no damage to painted surfaces, glass, rubber, plastic, etc.
€ plus VAT
23.50
23.50
23.50
23.50
26.50
26.50
31.50
33.50
23.50
23.50
23.50
23.50
26.50
26.50
31.50
33.50
46.00
46.00
31.50
21.00
Quality
made in
Europe
IHG 2400 – induction heater unit
·· Extremely versatile for bodywork and work
on commercial vehicles thanks to its outstanding performance and ample range of
standard accessories (additional accessories
available separately)
·· Easy to transport thanks to its compact
dimensions and a low weight of only 6.0 kg
Application
·· Removing dents caused by hail without corroding the paintwork
·· Removing larger sections of trim panels
·· Treating jammed and corroded parts, such
as bolts, nuts, screws, bearings, gear
wheels, etc.
·· Detaching and removing sealing compound
and polyfilla
·· Convenient windscreen removal for painting
cars and commercial vehicles - enables to
reuse windscreens with integrated seals
Touching up certain types
of dents without damaging
the paintwork
Prepare to be fascinated!
For more information check out
our video presentation at www.unicraft.de!
Model
Article no.
€ plus VAT
Only 6.0 kg
IHG 2400
6400100
2,249.00
Technical Data
Power supply
Mains frequency
Power consumption
Output
Fuse
Degree of protection
Output frequency
Dimensions (L x W x H)
Weight with accessories
Device weight
230 V
50/60 Hz
2.4 kVA
2.3 kW
16 T A
IP21
35 - 100 kHz
390 x 260 x 225 mm
12.5 kg
6 kg
IHG 2400 - ample range of accessories included in the delivery scope
(illustration on the bottom left)
Control concept
Users can benefit from the following
elements thanks to an innovative overall
concept, intelligent control technology
and matching
accessories:
Fast and easy to operate
2
4
5
1
3
IHG 2400 delivery scope:
IHG 2400, 1 combined scraper/lever (3 parts), 2 screen remover,
3
metal remover, 4 induction pad, 5 pneumatic foot switch
7
1
2
3
4
5
6
7
6
8
9
10
8
Loosening jammed and
corroded parts
9
10 11
Scope of delivery of the induction coil starter kit
9 Connection adapter for coils, 10 1x V M8+M10 induction coil,
11 1x V M12+M14 induction coil
11
Automatically detects connected accessories
Manual or automatic mode
Automatically controls output and frequency
Acoustic status messages
Accessories
Combined scraper/lever (unit price)
Screen removing agent
Metal removing agent
Induction pad
Pneumatic foot switch
Tool to remove damage caused by hail
Precision screen remover
Mobile IHG 2400 cabinet
Fibreglass belt KIT 25 x 50 mm (10 units)
Fibreglass belt KIT 50 x 150 mm (10 units)
Induction coil starter kit (connection adapter for coil +
each 1x V M8/M10, V M12/M14 induction coil)
Connection adapter for coils
V M8/M10 induction coil kit (kit = 2 units)
V M12/M14 induction coil kit (kit = 2 units)
V M16/M18 induction coil kit (kit = 2 units)
H M8/M10 induction coil kit (kit = 2 units)
H M12/M14 induction coil kit (kit = 2 units)
H M16/M18 induction coil kit (kit = 2 units)
V = vertical/H = horizontal
Article no. € plus VAT
3.99
6410001
399.00
6410002
359.00
6410003
269.00
6410004
6.99
6410007
269.00
6410005
449.00
6410006
149.00
6410000
49.90
6410008
69.90
6410009
369.00
6410020
6410027
6410021
6410022
6410023
6410024
6410025
6410026
320.00
49.00
49.00
49.00
49.00
49.00
49.00
3
Interested in more products?
www.holzkraft.de
The publication of this catalogue renders all previous price lists invalid.
· Prices are recommended retail prices, subject to
change, in €, plus statutory VAT, plus packaging,
shipping, transportation, unloading, installation
and training costs as applicable.
· We accept no liability for printing errors,
mistakes or incorrect representation.
Technical and visual changes reserved.
· Some illustrations show optional accessories
· Delivery is effected solely on the basis of our
terms of delivery and payment
· All items are sold through specialist retailers.
· The goods shall remain our property until payment has been received in full.
· Our retention of title shall remain valid in case of
sale to a third-party.
· Legal warranty conditions apply for businesses.
· Copying and reproduction in full or in part is
subject to written approval by us.
www.aircraft-kompressoren.com
Sales Germany:
UNICRAFT – Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Straße 26
D-96103 Hallstadt/Bamberg
Phone: +49 (0) 951 - 96 555-0
Fax: +49 (0) 951 - 96 555-55
Email: info@unicraft.de
Sales Austria:
AIRCRAFT Kompressorenbau GmbH
Gewerbestraße Ost 6 · A-4921 Hohenzell
Phone: +43 (0) 77 52 - 70 929-0
Fax: +43 (0) 77 52 - 70 929-99
Email: info@aircraft.at
www.aircraft.at
Your specialist retailer:
www.schweisskraft.de
www.metallkraft.de
www.holzstar.de
www.unicraft.de
© Stürmer Maschinen GmbH, 02/2015
www.optimum-maschinen.de