ARCHITECTURAL MILLWORK

Transcription

ARCHITECTURAL MILLWORK
SUSTAINABLE DESIGN
For centuries, American hardwoods have been
appreciated for their beauty, warmth, durability,
and lasting value. Today’s consumers are adding
“green” and “sustainable” to the reasons they
choose floors, cabinets, and millwork made from
domestic hardwoods. Sustainability is all about
meeting today’s needs without compromising
the needs for future generations.
MIRRORING NATURAL
FORCES
In a hardwood forest, trees compete for the
water and sunlight that come through the forest
canopy. Koetter Woodworking carefully harvests
individual trees, creating openings which allow
more precipitation, sunlight and nutrients to
reach the forest floor. This single-tree selection
method of harvesting reduces competition and
improves growing conditions. In practice for
decades, this mirrors the natural process of
single trees or small groups of trees perishing and
falling on their own.
Sustainable
OUR COMMITMENT TO
THE FUTURE
For over 50 years, Koetter Woodworking has been
committed to the sustainability of our industry’s
timber base. We personally oversee every
aspect of the harvest from our company timber
grounds, as well as purchased standing timber,
acknowledging BMP’s (Best Management
Practices) and all recognized harvesting and
silvicultural criteria.
In U.S. forests, we grow about twice as much
hardwood as we harvest each year. What’s
more, trees renew themselves on their own, and
in great abundance! With far more hardwood
growth than there is harvesting, American
hardwoods are the definition of environmentally
friendly, green, and sustainable – today and for
generations to come.
Tom Koetter, Founder, and his grandson, Mason.
STOCK MOULDINGS
Backbands................................................................................................................................................................... 9
Bar Rails................................................................................................................................................................... 43
Base Caps................................................................................................................................................................. 11
Bases.................................................................................................................................................................... 12-15
Brick Mould............................................................................................................................................................. 42
Casings.................................................................................................................................................................... 3-8
Casing Blocks...................................................................................................................................................... 16-17
Chair Rails................................................................................................................................................................ 19
Crowns................................................................................................................................................................ 25-32
Crown Backers.......................................................................................................................................................... 36
Dentil Moulds.......................................................................................................................................................... 37
Jambs................................................................................................................................................................... 41-42
Mantel Mould.......................................................................................................................................................... 37
Mulls........................................................................................................................................................................ 21
Panel Moulds............................................................................................................................................................ 22
Rope Moulding........................................................................................................................................................ 21
S4S........................................................................................................................................................................... 40
Specialty Millwork............................................................................................................................................... 34-35
Stops................................................................................................................................................................... 19, 41
T-Astragals................................................................................................................................................................ 42
Tongue & Vee Groove............................................................................................................................................. 38
Trim Moulds....................................................................................................................................................... 20-21
Window Stools......................................................................................................................................................... 24
PRIMED FIBERBOARD MOULDINGS
General Information................................................................................................................................................. 59
Bases.................................................................................................................................................................... 48-49
Base Cap................................................................................................................................................................... 49
Casings................................................................................................................................................................ 46-47
Chair Rail................................................................................................................................................................. 53
Crowns................................................................................................................................................................ 50-54
Tongue & Vee Groove............................................................................................................................................. 54
“Value Series” Base................................................................................................................................................... 56
Vee Groove and Beaded Sheet Stock........................................................................................................................ 55
GESSO-COATED PINE MOULDINGS
Bases.................................................................................................................................................................... 60-61
Casings..................................................................................................................................................................... 58
Crowns................................................................................................................................................................ 62-63
Jambs and Stops....................................................................................................................................................... 63
Shoe Mould.............................................................................................................................................................. 61
P R O D U C T S P E C I E S C H A R T . ......................................................................................................... 64-67
Most profiles represented in this catalog are stocked in Poplar (with the exception of profiles featured in the Primed Fiberboard and Primed-Pine section).
In addition, a large selection is stocked in finger-joint Poplar, primed finger-joint Poplar and Red Oak, and some are available in Cherry. Please see the
Koetter stock moulding price book for pricing and availability.
Additional species are available by special order. Please see our product species chart on pages 64-67 for a complete list of available species. Koetter has
a tooling library of over 3,000 custom profiles to meet your special requests. In addition, we have the capability of grinding custom tooling to meet the
exact specifications of your individual project. Visit our web site at www.koetterwoodworking.com to view our extensive selection of profiles.
Cover Image courtesy of Woody Built, LLC - Raleigh, NC • www.woodybuilt.com
ARCHITECTURA L M I L L W O R K
1
ONLINE DESIGN TOOLS
Experience Koetter Woodworking’s envisionIT™ profile library and design tool, available only online at
www.koetterwoodworking.com. Browse through our extensive collection of stock profiles, or choose from
over 3,000 special order profiles.
envisionIT™ includes a comprehensive search feature, providing you with the ability to easily narrow down
your selections by utilizing a multitude of search fields. Once you have selected your profile, you may open
and print a full scale, dimensioned PDF drawing.
Another key feature in envisionIT™ is the unique Layout Designer which is available exclusively to Koetter
Woodworking dealers and architects. This tool provides the ability to create multi-piece moulding mock-ups,
which can be printed and presented to an architect, designer, builder, or homeowner to assist them during
the design and selection process. This feature is also very useful for generating project drawings that can be
used on-site to give trim carpenters a visual representation of the millwork detail, especially where multi-piece
build-ups are used!
If you are looking for design ideas, browse our online photo gallery and view over 200 images featuring a variety of
millwork applications including cased openings, ceiling treatments, wainscoting, doors, and much, much more.
2
K O E T T E R W O O DWORKING, INC. • www.koetterwoodworking.com
CASINGS
24136-RF-CA 3/4" x 4 1/4"
2488-F-CA 3/4" x 2 3/4"
24112-RF-CA 3/4" x 3 1/2"
24112-F-CA 3/4" x 3 1/2"
24112-R-CA 3/4" x 31/2"
24104-R-CA 3/4" x 3 1/4"
3
CASINGS
32136 -CA 1" x 4 1/4"
32112-H-CA 1" x 3 1/2"
24112-CA 3/4" x 3 1/2"
2488-CA 3/4" x 2 3/4"
24112-C-CA 3/4" x 3 1/2"
40120 -CA 11/4" x 3 3/4"
4
CASINGS
24136-RD-CA 3/4" x 4 1/4"
24112-RD-CA 3/4" x 3 1/2"
2488-RD-CA 3/4" x 2 3/4"
24136-E-CA 3/4" x 4 1/4"
2472-B-CA 3/4" x 2 1/4"
24112-E-CA 3/4" x 3 1/2"
5
CASINGS
32128-G-CA 1" x 4 "
32128-H-CA 1" x 4"
32128-I-CA 1" x 4 "
32128-J-CA 1" x 4 "
32128-K-CA 1" x 4 "
6
CASINGS
32128-L-CA 1" x 4"
2488-B-CA 3/4" x 2 3/4"
24112-B-CA 3/4" x 3 1/2"
2472-MW-CA 3/4" x 2 1/4"
2488-E-CA 3/4" x 2 3/4"
7
CASINGS
2496-Q-CA 3/4" x 3"
2496-P-CA 3/4" x 3"
1872-A-CA 9/16" x 2 1/4"
24112-RV-CA 3/4" x 3 1/2"
Reversible
24112-P-CA 3/4" x 3 1/2"
8
2472-A-CA 3/4" x 2 1/4"
BACKBANDS
4048-ID-BB 11/4" x 11/2"
(1/4" x 3/4" rabbet)
4856-ITC-BB 11/2" x 13/4"
(3/8" x 1" rabbet)
3248-IT-BB 1" x 11/2"
(3/8" x 3/4" rabbet)
3436-BB 1 1/16" x 1 1/8"
(3/16" x 3/4" rabbet)
4650-A-BB 17/16" x 19/16"
2432-EG-BB 3/4" x 1"
(1/4" x 11/16" rabbet)
(1/4" x 3/4" rabbet)
Adjustable to fit 1" or 11/16" casing
3660-BB 11/8" x 17/8"
5668-BB 1 3/4" x 21/8"
(1/4" x 1" rabbet)
(1/4" x 3/4" rabbet)
3652-BB 1 1/8" x 1 5/8"
(1/4" x 3/4" rabbet)
9
PEDIMENT HEAD DESIGN IDEAS
Adding a pediment head is a simple
way to dramatically transform any
architectural door or window opening.
4650-A-BB
1 7/16" x 19/16"
5668-BB
1 3/4" x 21/8"
32112-S4S
1" x 31/2"
1640-BN
1
/2" x 11/4"
24176-S4S
3
/4" x 51/2"
Choose from a variety of S4S widths
to create a pediment appropriate for
your individual ceiling height.
1640-BN
1
/2" x 11/4"
10
BASE CAPS
1723-BD-BC 17/32" x 23/32"
2244-B-Cap 11/16" x 1 3/8"
2448-US-BC 3/4" x 1 1/2"
2148-CB-Cap 21/32" x 1 1/2"
3248-US-BC 1" x 1 1/2"
2444-B-CAP 3/4” x 1 3/8”
3248-ITC-BC 1" x 1 1/2"
(1/4" x 3/4" rabbet)
ARCHITECTURAL M I L L W O R K
11
BASES
* = Skirtboard also available in this profile. See Stair Part Price Book for available species.
18232-B
9
/16" x 7 1/4"
12
18168-B*
/16" x 5 1/4"
9
18136-B
/16" x 4 1/4"
9
22232-E-B
/16" x 71/4"
11
22168 -E-B*
/16" x 5 1/4"
11
BASES
16104-B
1
/2” x 3 1/4”
18136-R-B
9
/16" x 4 1/4"
20168-1R18-B
/8” x 51/4”
5
18168-OG-B*
/16" x 5 1/4" 9
18136-OG-B
/16" x 4 1/4"
9
18104-OG-B
/16” x 3 1/4
9
13
BASES
24232-BD-B 3
/4" x 71/4"
14
24168-BD-B 3
/4" x 51/4"
24112-BD-B 3
/4” x 31/2”
20168-BD-B
5
/8” x 51/4”
BASES
22232-CB
11
/16" x 7 1/4" 22168 -CB*
11
/16" x 5 1/4"
22136-CB
11
/16" x 4 1/4"
22104-CB
11
/16" x 3 1/4"
18136-TB
9
/16" x 4 1/4"
15
BLOCKS
Casing Block
Circle Casing Block
See Stock Moulding Price Book
for available sizes of all blocks
shown on this page.
Keystone
Inside Base Corner Block
16
Outside Base Corner Block
Plinth Block
SPECIALTY BLOCKS
Circle Casing Block
Available in the following sizes:
24176-Q-CIR 512 3/4" x 51/2" x 51/2"
36176-Q-CIR 512 11/8" x 51/2" x 51/2"
Circle Casing Block
27
2784-Q-CIR 258
/32" x 25/8" x 25/8"
27
27112-Q-CIR 312 /32" x 31/2" x 31/2"
27120-Q-CIR 334 27/32" x 33/4" x 33/4"
Plinth Block
34208-PL 312 11/16" x 61/2"h x 31/2"w
34208-PL 334 11/16" x 61/2"h x 33/4"w
34256-PL 412 11/16" x 8"h x 41/2"w
34296-PL 512 11/16" x 91/4"h x 51/2"w
17
CROWN BLOCKS
112-RD-ICB 412
31/ " x 31/2" x 41/2"
2
128-RD-ICB 5
4" x 4" x 5"
144-RD-ICB 512
41/2" x 41/2" x 51/2"
The blocks pictured are Inside Corner Blocks
Decorative Outside Corner Blocks
Are Also Available in the Following Sizes:
• POP 224-RD-OCB 412 - 7" x 7" x 41/2"
• POP 256-RD-OCB 5 - 8" x 8" x 5"
• POP 288-RD-OCB 512 - 9" x 9" x 51/2"
• POP 352-RD-OCB 612 - 11" x 11" x 61/2"
Listed below are our stock crown profiles, and
which decorative blocks they will work with:
176-RD-ICB 612
51/2" x 51/2" x 61/2"
18
31/2" x 31/2" Block
4" x 4" Block
2488-A-CR
18168-A-CR
20104-B-CR
20168-B-CR
24104-D-CD
24168-A-CR
24104-ITC-CR
24168-RD-CR
26120-D-CR
24168-C-CR
20136-B-CR
24168-WHI-CR1
24136-A-CR
26168-D-CD
24136-C-CR
24136-CV-CR
18m136-A-CR
24136-RD-CR
15m168-B-CR
15m104-B-CR
18m168-A-CR
15m136-B-CR
18m168-C-CR
41/2" x 41/2" Block
51/2" x 51/2" Block
24168-QA-CR
26192-CR
15m168-B-CR
18m192-CR
25m202-OG-CR
26168-D-CR
24168-CO-CR
WM45
32232-A-CR
34232-B-CR
25m224-CO-CR
18m232-RB-BCR
20m232-CR
25m232-C-CR
NOTE - All crown block
dimensions are based on the flat
section of the block, not including
the applied crown mould.
CHAIR RAILS AND STOPS
22104-CH 11/16" x 3 1/4"
1256-Stop 3/8" x 1 3/4"
1644-KW-Stop 1/2" x 1 3/8"
1144-Stop
11
16104-CH 1/2" x 3 1/4"
2288-CH 11/16" x 2 3/4"
1234-Stop 3/8" x 1 1/16"
1640-Stop 1/2" x 1 1/4"
32104-CH 1" x 3 1/4"
1026-Stop 5/16" x 13/16"
2040-Stop 5/8" x 1 1/4"
/32" x 1 3/8"
19
TRIM
1840 9/16" x 1 1/4"
2424-Q 3/4" x 3/4" 2323-Bead
1846 9/16" x 1 7/16"
1648 1/2" x 1 1/2"
2448-HR 3/4" x 1 1/2"
20
1624-A 1/2" x 3/4" 1212-Q 3/8" x 3/8" 1224-T 3/8" x 3/4" K O E T T E R W O O DWORKING, INC. • www.koetterwoodworking.com
/32" x 23/32" 23
2424-I 3/4" x 3/4" 2024 5/8" x 3/4" 2424-C 3/4" x 3/4" 1416-GB 7/16" x 1/2"
1624-C 1/2" x 3/4"
2424-O 3/4" x 3/4"
3636-O 1 1/8" x 1 1/8"
TRIM AND MULLS
512-Rope 96 5/32" x 3/8" x 96" Half Rope
Sold in pieces
816 1/4" x 1/2"
1124-Rope 96
816-A 1/4" x 1/2"
/32" x 3/4" x 96" Half Rope
11
Sold in pieces
1724-Rope 96
624 3/16" x 3/4"
1624 1/2" x 3/4"
2232-TM
1224-KR 3/8" x 3/4"
/32" x 3/4" x 96" Quarter Rope
17
Sold in pieces
/16" x 1"
11
4040-ROD 11/4" x 11/4"
1640-BN 1/2" x 11/4"
864-M 1/4" x 2"
856-M 1/4" x 13/4"
840-M 1/4" x 1 1/4"
848-M 1/4" x 1 1/2"
832-M 1/4" x 1"
21
PANEL MOULDS
3264-PR 1" x 2"
(1/2"
x
3/4"
2664-P 13/16" x 2"
rabbet)
2424-R 3/4" x 3/4"
(1/4" x 1/2" rabbet)
2428-ITC-PM 3/4" x 7/8"
2488-KW-PR 3/4" x 23/4"
Can be positioned to accomodate a thickness of 1/2" to 3/4".
2048-KW-PM 5/8" x 1 1/2"
2664-PR 13/16" x 2"
(1/2" x 1/2" rabbet)
2448-BM 3/4" x 1 1/2"
2464-PM 3/4" x 2"
Can be positioned to accomodate a thickness of 3/16" to 3/4".
22
23
STOOLS
24136-Stool 3/4" x 4 1/4"
2472-A-Stool 3/4" x 2 1/4"
40104-Stool 1 1/4" x 3 1/4"
24
2472-Stool 3/4" x 2 1/4"
CROWNS
315/16"
Degree shown on crown mouldings = spring angle
projection
2/"
height
47/16"
height
61/8"
7
8
projection
23/32"
projection
24168-QA-CR
3
/4" x 5 1/4"
(31.5 )
O
height
O
127/32"
32232-A-CR
1" x 7 1/4"
(30.5 )
2488-A-CR
3
/4" x 2 3/4"
(43.5 )
O
25
CROWNS
/ "
15
16
projection
411/32"
height
117/32"
projection
311/16"
projection
1857-CR
9
/16" x 1 25/32"
(32.5 )
height
7
4 /32"
O
26192-CR
13
/16" x 6"
(43.5 )
3"
projection
height
325/32"
O
24168-A-CR
/4" x 5 1/4"
(43.5 )
3
height
31/16"
O
24136-A-CR
3
/4" x 4 1/4"
(43.5 )
O
26
27
28
CROWNS
311/16"
projection
height
33/32"
height
37/8"
215/16"
projection
3/"
1
2
projection
24136-C-CR
3
/4" x 4 1/4"
(43.5 )
O
26168-C-CR
13
/16" x 5 1/4"
(43.5 )
O
2/"
24168-RD-CR
3
/4" x 5 1/4"
(43.5 )
height
33/16"
height
331/32"
7
8
projection
24136-RD-CR
3
/4" x 4 1/4"
(43.5 )
O
O
29
CROWNS
429/32"
projection
31/16"
projection
215/32"
height
125/32"
20168-B-CR
5
/8" x 5 1/4"
(34.5 )
height
O
315/32"
32232-B-CR
1" x 7 1/4"
(43.5 )
height
projection
41/4"
20136-B-CR
5
/8" x 4 1/4"
(34.5 )
height
O
23/4"
53/8"
projection
O
20104-B-CR
5
/8" x 3 1/4"
(34.5 )
O
30
DENTIL CROWNS
321/32"
projection
229/32"
projection
height
313/16"
1620-I-D
1
/2" x 5/8"
26168-D-CD
13
/16" x 5 1/4"
(33.5 )
26168-D-CR
13
/16" x 5 1/4"
(43.5 )
O
height
29/16"
413/32"
O
127/32"
1724-ROPE 96
17
/32" x 3/4" x 96"
height
projection
211/16"
height
225/32"
projection
Quarter Rope
26120-D-CR
13
/16" x 3 3/4"
(43.5 )
O
24104-D-CD
3
/4" x 3 1/4"
(34.5 )
O
31
CROWNS
3/"
3
4
projection
311/32"
height
33/4"
projection
24168-WHI-CR1
3
/4" x 51/4"
(43.5 )
height
211/16"
O
2/"
1
8
projection
24136-CV-CR
3
/4" x 41/4"
(50 )
height
21/2"
O
24104-ITC-CR
3
/4" x 3 1/4"
(44.5 )
O
32
33
Specialty
SPECIALTY MILLWORK
When it comes to fine architectural millwork, Koetter Woodworking’s capabilities extend far beyond what you will find
in this catalog. Koetter is an industry leader in providing specialty millwork items for the most discriminating clientele.
Our master craftspeople work hand-in-hand with Koetter’s product engineers, ensuring high-quality, precision made
products for residential or commercial applications. When your project demands the best, rely on the experts at Koetter
Woodworking as your single source for top quality specialty millwork products.
• Curved Millwork - including casing, base, crown, handrail, jambs, and more
• Bentwood Jamb Heads - including flat, fluted, reeded and raised panel
• Specialty columns and pilasters
• Specialty stair treads and starting steps
• Fireplace Mantels
• Pediment heads for doors and entryways
• Raised panel wall systems
34
Millwork
ARCHITECTURAL M I LL W O R K
35
CROWN BACKERS
24232-BD-B
3
/4" x 71/4"
24168-BD-B
3
/4" x 51/4"
24112-BD-B
3
/4" x 31/2"
2480-CRB
3
/4" x 2 1/2"
32128-CRB
1" x 4"
2488-EJ-CB
3
/4" x 2 3/4"
Reversible
Crown Backer
36
DENTILS AND MANTEL MOULD
2460-Rout-D
3
/4" x 1 7/8"
2460-Cut-D
3
/4" x 1 7/8"
1620-I-D
1
/2" x 5/8"
54168-A-MM 1 11/16" x 5 1/4"
37
TONGUE AND VEE GROOVES
24160-TVG 3/4" x 5 " (face)
24128-TVG 3/4" x 4" (face)
2496-TVG 3/4" x 3" (face)
2496-TVG-BD 3/4" x 3" (face)
1296-TVG-BD 3/8" x 3" (face)
38
39
40
2448-S4S
3
/4" x 11/2"
2456-S4S
3
/4" x 13/4"
2464-S4S
3
/4" x 2"
2472-S4S
3
/4" x 21/4"
2480-S4S
3
/4" x 21/2"
24112-S4S
3
/4" x 31/2"
24168-S4S
3
/4" x 51/4"
24176-S4S
3
/4" x 51/2"
24232-S4S
3
/4" x 71/4"
24296-S4S
3
/4" x 91/4"
24360-S4S
3
/4" x 111/4"
S4S
Additional thickness' of 1", 11/8", 11/4", 11/2" and 13/4"
are also available. See Stock Moulding Price Book for
more details.
JAMBS AND ACCESSORIES
Double Rabbeted Jamb
2040-Stop 5/8" x 1 1/4"
Flat Jamb
1640-Stop 1/2" x 1 1/4"
Fluted Jamb
1644-KW-Stop 1/2" x 1 3/8"
Reeded Jamb
41
JAMBS AND ACCESSORIES
Raised Panel Jamb
Single Rabbeted Exterior Jamb
Kerfed for weatherstrip
4072-T 1 1/4" x 2 1/4"
4064-BR 1 1/4" x 2"
48100-T 11/2" x 31/8"
Exterior T-Astragal
Kerfed for weatherstrip
42
BAR RAILS AND ARCHED CASINGS
56144-Bar 1 3/4" x 4 1/2"
4096-Bar 1 1/4" x 3"
Arched Casings and convex or concave bases, crowns and chair rails are available in various profiles on a per-order basis.
43
ORDERING INFORMATION FOR
ARCHED CASINGS AND BENTWOOD JAMB HEADS
For a True Half Circle –
For a “Segment” of a True Half Circle -
We Need:
We Need:
a. The Quantity
a. The Quantity
b. The Profile – (on arched casings)
c. The Specie
c. The Specie
d. The Inside Diameter (ID)
d. The Inside Dimension
e. The Inside Radius
e. The Rise
f. “Bandsawn”, “Bentwood”, or “Finger Joint”
f. “Bandsawn”, “Bentwood”, or “Finger Joint”
g. Reveal Information - (on arched casings) Always
note whether or not it has been added; if not already
added, note how much we need to add.
g. Reveal Information - (on arched casings) Always
note whether or not it has been added; if not already
added, note how much we need to add.
h. Any special instructions (ex: 1 pc. – bentwood, 6"
straight extensions, spec. # of pieces, tag #’s, etc.)
h. Any special instructions (ex: 1 pc. – bentwood, 6"
Note!! If the arch is a true half circle, we do NOT need
a template. On a true half circle, the inside radius
dimension is always half of the ID.
Example of how to order a “segment” of a true half
circle -
Example of how to order a true half circle 2 – 24112-CA poplar arched casing, 72" ID, 36" radius,
add 1/4" reveal (put any special instructions at the
end, such as “bentwood")
- OR 1 – 4 9/16" poplar bentwood jamb head, 60" ID, 30"
radius
44
2 – 24112-CA poplar arched casing segment, 72" inside
dimension, 12" rise, do not add for reveal (put any
special instructions at the end, such as “bentwood")
- OR 1 – 6 9/16" fluted cherry bentwood jamb head segment,
56" ID, 28"radius, 5" rise
ORDERING INFORMATION FOR
ARCHED CASINGS AND BENTWOOD JAMB HEADS
For an Elliptical or “Gothic” –
We Need:
a. The Quantity
c. The Specie
d. Template – Templates are always required for
elliptical or gothic arches AND jamb heads.
e. Reveal Information – (on arched casings) Always
note whether or not it has been added; if not
already added, note how much we need to add.
f. Any special instructions (ex: 1 pc. – bentwood, 6"
Example of how to order an elliptical –
2 – 24112-CA poplar elliptical arched casing per
template
- OR 5
1 – 8 /8" oak elliptical flat bentwood jamb head per
template
45
PRIMED FIBERBOARD
CASINGS
25M112-H-CA 25mm x 31/2"
25M112-CA 25mm x 31/2"
18M112-C-CA 18mm x 31/2"
18M88-CA 18mm x 23/4"
24112-R-CA 3/4" x 31/2"
46
PRIMED FIBERBOARD
CASINGS
18M72-A-CA 18mm x 21/4"
18M112-E-CA 18mm x 31/2"
18M112-CA 18mm x 31/2"
18M112-RD-CA 18mm x 31/2"
18M112-UL-CA 18mm x 31/2"
18M136-E-CA 18mm x 41/4"
47
PRIMED FIBERBOARD
BASES
18M208-B
18mm x 61/2" 48
15M232-E-B
15mm x 71/4"
15M160-B
15M168-E-B
1
15mm x 5"
15mm x 5 /4" PRIMED FIBERBOARD
BASES AND BASE CAPS
15M48-CB-CAP
15mm x 11/2"
24112-BD-B
3
/4" x 31/2"
15M232-CB
15mm x 71/4" 15M168-CB
15mm x 51/4"
15M136-CB
15mm x 41/4" 15M104-CB
15mm x 31/4"
49
PRIMED FIBERBOARD
CROWNS
125/32"
projection
37/32"
projection
53/64"
height
15M104-B-CR
15mm x 31/4"
(34.5 )
O
27/16"
height
projection
41/8"
15M168-B-CR
15mm x 51/4"
(34.5 )
height
18M232-RB-BCR
18mm x 71/4"
(45 )
315/32"
height
O
51/4"
23/4"
projection
O
15M136-B-CR
15mm x 41/4"
(34.5 )
O
50
PRIMED FIBERBOARD
CROWNS
53/16"
projection
53/16"
height
25M232-C-CR
25mm x 71/4"
(43.5 )
height
O
53/32"
53/32"
projection
20M232-CR
20mm x 71/4"
(45 )
O
51
PRIMED FIBERBOARD
CROWNS
47/ "
16
projection
49/16"
25M202-OG-CR
25mm x 65/16"
(43.5 )
height
315/16"
height
47/16"
projection
O
O
24224-QRK-TAG 3/4” x 7"
(shown at 90% of size)
24160-QRK-TAG 3/4” x 5"
52
18M192-CR
18mm x 6"
(48.5 )
PRIMED FIBERBOARD
CROWNS AND CHAIR RAILS
325/32"
projection
323/32"
height
321/32"
projection
18M168-A-CR
18mm x 51/4"
(45 )
31/32"
projection
height
323/32"
O
18M168-C-CR
18mm x 51/4"
(45 )
3"
25M104-CH
25mm x 31/4"
height
O
18M136-A-CR
18mm x 41/4"
(43.5 )
O
53
PRIMED FIBERBOARD
CROWNS AND T&VG
49/16"
projection
4/"
height
24168-CO-CR
3
/4" x 51/4"
(47 )
height
O
51/4"
315/16"
5
8
projection
25M224-CO-CR
25mm x 7"
(40.7 )
O
18M168-TVG-BD 18mm x 51/4"
54
15M96-TVG-BD 15mm x 3"
VEE GROOVE AND BEADED SHEET STOCK
• Perfect for walls, ceilings, and cabinet or bar fronts
• Stocked in 1/2" x 4' x 8' sheets, unprimed (pattern runs along 8' length)
• Ship lap construction allows for easy installation
• Additional sizes & patterns available upon request
MDF 1248-ITC-BD-314
1
/2" x 4' x 8' beaded, approx. 31/4" OC
MDF 1248-ITC-VG-514
1
/2" x 4' x 8' vee grooved, approx. 51/4" OC
55
PRIMED FIBERBOARD
VALUE SERIES BASES
16232-VS-CB
1
/2" x 71/4"
Also available:
16296-VS-CB
56
16168-VS-CB
1
/2" x 51/4"
/2" x 91/4"
1
16136-VS-CB
1
/2" x 41/4"
16104-VS-CB
1
/2" x 31/4"
PRIMED FIBERBOARD
GENERAL INFORMATION
THE MADE IN AMERICA
ADVANTAGE
PRIMED FIBERBOARD
FINISHING GUIDELINES
Utilizing a domestic supply chain provides the high level
of responsiveness required to be successful in today’s
ever-changing market. Not only does domestic sourcing
provide faster response times and more opportunity for
customization specific to your needs, but it also promotes
job growth and community development right here in
the USA!
Koetter Woodworking’s Primed Fiberboard mouldings
are coated with a high quality water based acrylic latex
primer. Any high quality water, oil, or lacquer based top
coats will work to produce a good finished product. (For
best results, follow the paint manufacturer’s instructions
regarding product use.)
PRIMED FIBERBOARD
INSTALLATION GUIDELINES
• Store mouldings on the jobsite flat, and up off the
floor to prevent material from getting wet and drawing
moisture.
• Prior to installation, mouldings should be stored in
room conditions for a minimum of 48 hours. Contrary
to popular belief, MDF can expand and contract due
to changes in relative humidity, so acclimation is very
important.
• When ripping, cutting or routing, carbide tipped blades
and/or cutter heads are strongly recommended.
• Pneumatic fastening systems with the air pressure set at
90 – 120 PSI works best.
• The types of fasteners that work best are 16-18 gauge
finish nails. Smooth shank nails are not recommended.
However, it is up to the installer to decide what works
best for his own application.
• MDF is a man-made product that is excellent for
face nailing (1” from ends and ¼” from edges is
recommended). Edge nailing is not recommended.
Koetter Woodworking’s Primed Fiberboard mouldings
have an exclusive finish process with a double prime and
double profile-sand manufacturing process which results
in a smoother finish, decreasing in-field finishing time
and associated costs.
For best results:
• Fill and seal all nail holes.
• Lightly sand with fine grit sandpaper or a piece
of Scotchbrite.
• Wipe down the surface of the moulding that is going to
be painted with a tack cloth to remove any excess dust
left from sanding.
• Apply the first coat of premium paint.
• Lightly sand again with fine grit sandpaper or Scotchbrite
to help the second coat of paint adhere to the first.
• Wipe down the moulding with a tack cloth to remove
any dust from sanding.
• Apply a second coat of premium paint.
• The use of a fast drying adhesive, such as our KwikBond Adhesive and Activator, helps to prevent the
separation of mitered corners. Another option for
applying casing around doors and windows is to use
casing corner blocks. In this application, the use of
glue is not required
57
GESSO-COATED PINE
CASINGS
PFP WM356 11/16" x 21/4" x 14'
PFP WM356 84 11/16" x 21/4" x 84"
PFP 22112-C2-CA
PFP 2288-E2-CA
/16" x 31/2" x 15'
11
/16" x 23/4" x 15'
11
PFP 22112-B-CA
/16" x 31/2" x 15'
11
PFP 2288-CA 11/16" x 23/4" x 15'
PFP 2288-CA 86 11/16" x 23/4" x 86"
PFP 2288-B-CA
PFP 22112-W-CA
58
11
/16" x 31/2" x 15'
/16" x 23/4" x 15'
11
59
GESSO-COATED PINE
BASES
PFP 18232-CB
9
/16" x 71/4" x 16'
60
PFP 18168-CB
9
/16" x 51/4" x 16'
PFP 18136-CB
9
/16" x 41/4" x 16'
PFP 18104-CB
9
/16" x 31/4" x 16'
GESSO-COATED PINE
BASES
1624-A
1
/2" x 3/4"
PFP 17168-EB
17
/32" x 51/4" x 16'
PFP WM663
9
/16” x 31/4” x 16’
PFP WM623
9
/16" x 31/4" x 16'
61
GESSO-COATED PINE
CROWNS
125/32"
projection
225/64"
height
23/4"
projection
31/16"
projection
PFP WM51
9
/16" x 31/4" x 16'
(34.5 )
height
31/2"
O
PFP WM48
9
/16" x 41/4" x 16'
(35.5 )
height
49/32"
O
PFP WM45
9
/16" x 51/4" x 16'
(34.5 )
O
62
GESSO-COATED PINE
CROWNS, JAMBS AND STOPS
329/32"
projection
31/16"
height
221/32"
height
39/16"
projection
PFP 17136-A-CR
17
/32" x 41/4" x 16'
(45 )
PFP 18168-A-CR
9
/16" x 51/4" x 16'
(43.5 )
O
O
PFP 21148-J
21
/32" x 45/8" x 12'
PFP 21148-JL 812132
21
/32" x 45/8" x 8121/32"
PFP 1344-STOP
13
/32" x 13/8" x 81"
11/32
4 5/8
PFP 33148-JLSP 8134
11/32" x 45/8" x 813/4"
63
PRODUCT SPECIES CHART
Stock species are subject to change without notice.
64
65
66
67
PAGE 28 COURTESY OF:
COVER IMAGE COURTESY OF:
ITC Millwork & Woody Built Homes
Stallings / Raleigh, NC
ITC Millwork & Woody Built Homes
• Casing – 24112-CA w/3652-BB backband
• Base – 16296-VS-CB
• Crown – 25m202-OG-CR
• Column Wrap & Mantle Detail – S4S (various widths),
3248-IT-PM, 2020-BEAD, 1664-BN
• Casing – 24112-CA w/3652-BB backband
•Base – 16296-VS-CB
•Crown – 25m202-OG-CR
• Column Wrap – S4S (various widths), 3248-IT-PM,
2020-BEAD, 1664-BN
Insidesign
Atlanta, GA
ITC Millwork
• Crown – 26192-CR w/2488-EJ-CB crown backer
• Panel Mould – 1840
• Casing – 32128-K-CA
• Casing – 24176-S4S
• Base – 24232-BD-B
• Crown – 24136-C-CR
• Pediment Heads – 24160-S4S, 1640-BN
PAGE 23:
Private Residence
• Casing – 24112-P-CA w/3652-BB backband
• Base – 22232-CEM-B
• Chair Rail – 2464-PM
• Panel Mould – 3068-CE-PR
• Shoe Mould – 22168-CEM-B site ripped to 2-3/4" wide
ITC Millwork & Loyd Builders
• Casing – 24112-BD-B w/5460-IT-BB backband
• Base – 24232-S4S w/2444-IT2-BC base cap
• Crown – 42248-AM-CR w/48160-IT-CRB crown backer
• Wall Covering – 1248-ITC-VG 514
ITC Millwork
Insidesign
Atlanta, GA
• Casing – 5680-ID-CA
• Crown – 25m202-OG-CR
• Ceiling & Wall Covering – 24224-QRK-TAG
ITC Millwork
• Casing – 40144-IT-CA w/4064-DB-BB backband
• Crown – 26112-ST-CR
• Panel Mould – 3044-IT-PR
We would like to thank those Koetter dealers, who have provided many of the exceptional photos featured in this catalog.
Based on information provided, the mouldings listed above are an accurate representation of the profiles featured in the referenced photographs.
Keep in mind that the look achieved with each individual installation will vary.
Photographs in this catalog may not be copied, reproduced, transmitted or manipulated without the express written permission of Koetter Woodworking.
In addition to Architectural Millwork, Koetter Woodworking supplies a full line of Stile & Rail Wood Doors and Stair Parts.
Please visit www.koetterwoodworking.com to view any of our complete catalogs.
ARCHITECTURAL
MILLWORK
68
SOLID WOOD DOORS
STAIR PARTS
KOETTER WOODWORKING'S MISSION
As a unified team, we must strengthen our company’s structure by
achieving established goals to more effectively meet the ever changing
needs of our team members, customers, suppliers, and community.
LIT KOE STO/0415
Koetter Woodworking, Inc.
(812) 923-8875
800-411-8285 toll free fax
www.koetterwoodworking.com

ARCHITECTURAL MILLWORK

Transcription

Similar documents

protint 751 update

Christy Schlesinger

Event: Elite Model Look 24th World Final

AM Manchester Brochure - Allegheny Millwork Lumber

Valerio Olgiati`s Radical Retreat

ISLANDFLEXTEC MOULDINGS T.C.I.

bell center

Amphitheater

Agde - Plage Rochelongue - fntc

Untitled