ModelFTV - Goldberg Systems GmbH

innovation in energy
innovation in energy
FTV
Model
EV/HEV Battery Module Testing System
FEATURES & BENEFITS
• Drive simulations with standard Electric Vehicle tests: FUDS,
SFUDS, GSFUDS, DST and ECE-15L
• Drive Cycle Conversion utility automates test program
development from acquired battery usage data
• Test control and data management with Bitrode’s VisuaLCN
Lab Client software suite
• Constant Current, Power or Voltage Control
• Bipolar capacity for discharging to below zero volts
• Parallel circuit operation for greater flexibility in test
specification
• Assignable Data Channels
• Discharge power recycled to AC line for cooler, more
energy-efficient operation
• No performance loss under voltage control
• Remote Binary Protocol via Ethernet connection available for
3rd party software control
• Program execution is independent from the PC with
VisuaLCN software
System Options
Bitrode Model FTV-2-400-12
GENERAL SPECIFICATIONS
Voltage: Current:
Power: Maximum Channels:
Accuracy:
Data Sampling Rate:
0-100V
up to 1000A (2000A in parallel)
up to 100kW (200kW in parallel)
4
±0.1% of FS*
up to 10ms
• Multiple current ranges per circuit
• High impedance cell voltage monitoring
• Temperature monitoring
• Pressure monitoring
• Internal resistance
• Ramp charge/discharge
• Programmable analog or digital inputs and digital outputs
• Remote Input Output (RIO) box - reduces excessive cable
lengths when connecting to remote test stations
• Module-front LCD display • Constant resistance discharge
• Custom-designed test leads
• Custom-designed cell or battery handling fixtures
• Integration with Battery Management Systems: CAN
*Accuracy values are conservative assuming operation will be through the standard
temperature range of 0-40˚ C and RH from 10-90% (non-condensing). Units calibrated and
maintained in a temperature and humidity controlled environment can expect an accuracy
of 0.02-0.05%FS.
Bitrode, Inc.©2012 www.bitrode.com
innovation in energy
innovation in energy
FTV
Model
EV/HEV Battery Module Testing System
General Configurations - Contact bitrode for your custom specification requirements
Model*
FTV4-300-20
FTV4-500-20
FTV4-100-60
FTV4-200-60
FTV4-300-100
FTV4-500-100
Constant Current Amp Range (A)
per ciruit/per cabinet
0.0-300.0/1200.0
0.0-500.0/2000.0
0.00-100.00/400.00
0.00-200.00/800.00
0.0-300/1200.0
0.0-500.0/2000.0
Cabinet Input Amps (A) (50 or 60HZ)
Model*
Three Phase
380V400V415V480V
FTV4-300-20
90
85
80
70
FTV4-500-20
120
115
110
95
FTV4-100-60
85
80
75
65
FTV4-200-60
120
115
110
95
FTV4-300-100
260
245
240
204
FTV4-500-100
460
440
425
365
Charge/Discharge
Voltage (V)
0.000-20.000
0.000-20.000
0.00-60.00
0.00-60.00
0.00-100.00
0.00-100.00
Constant Wattage (kW)
per circuit/per cabinet
6.000/24.000
10.000/40.000
6.000/24.000
12.000/48.000
30.00/120.00
50.00/200.00
Dimensions†Weight†
in/cm
lb/kg
W
D
H
57/145
35/89
78/199
2800/1273
57/145
35/89
78/199
3200/1455
57/145
35/89
78/199
2100/955
57/145
35/89
78/199
2700/1227
57/145
35/89
78/199
3400/1545
105/267
31/79
86/219
4700/2136
* If required specifications do not appear in this table, contact Bitrode Corporation; custom product engineering is one of our
greatest strengths. Module names are interpreted as follows: FTVx-yy-zz, where xx indicates number of circuits per cabinet, yy
indicates amperage and zz indicates voltage.
† Dimensions and Weight may vary according to design requirements.
All specifications subject to change.
BITRODE CORPORATION
9787 Green Park Industrial Drive
St. Louis, Missouri 63123 USA
Tel: (636) 343.6112 • Fax: (636) 343.7473
email: sales1@bitrode.com
web: www.bitrode.com
BITRODE EU/SOVEMA SPA
via Spagna, 13
37069 Villafranca (Verona), Italy
Tel: +39.045.6335711 • Fax: +39.045.6303911
Contact Person: Mr. Roberto Vecchia
Tel: +39.045.6335725 • Mobile: +39.331.6338697
email: roberto.vecchia@bitrode.eu
BITRODE UK OFFICE
Tel: 44 1242 23111
Contact Person: Mr. Graham Peters
email: sales@bitrode.co.uk