Drilling and Demolition Part 2 4872.7kB

Transcription

Drilling and Demolition
Corded Rotary Hammers
Drill UD 30
Page 32
Rotary hammer TE 2
Page 33
Rotary hammer TE 1
Rotary hammer TE 2-S
Rotary hammer TE 2-M
Rotary hammer TE 7
Rotary hammer TE 7-C
Cordless Combihammers
Cordless combihammer TE 30-A36
Combihammers
Combihammer TE 70-D/AVR
Combihammer TE 70-AVR
Combihammer TE 70-AVR/AVR
Demolition Hammers and Breakers
Page 40
Page 41
Page 41
Page 42
Page 42
Page 43
Breaker TE 700-AVR
Page 47
Breaker TE 1500-AVR
Breaker TE 3000-AVR
Hammer Drill Bits (SDS)
Page 46
Page 47
Page 48
Page 48
Hammer drill bit 4 - 6 mm TE-C
Page 49
Hammer drill bit sets (metric) TE-CX
Page 52
Hammer drill bit, multipack, 5 - 7 mm TE-CX
Hammer drill bit TE-CD
Hammer drill bits, 12 - 16 mm (metric) TE-YX
Percussion core bit TE-Y-BK
Bell-shaped bit TE-Y GB
Hammer drill bit metric TE-Y
Hammer drill bit TE-YD
Chisels
Page 49-51
Page 52
Page 53-54
Page 54-55
Page 55
Page 56
Page 56
Pointed chisel TE-CP-SM
Page 57
Pointed chisel TE-YP-SM
Page 57
Narrow-flat chisel TE-CP-FM
Narrow-flat chisel TE-YP-FM
Wide-flat chisel TE-YP-SPM
Narrow-flat chisel TE-SP FM
Pointed chisel TE-SP SM
Wide-flat chisel TE-SP SPM
Pointed chisel TE-H28P SM
Narrow-flat chisel TE-H28P FM
Accessories
Page 57
Page 58
Page 58
Page 58
Page 59
Page 59
Page 59
Page 60
Needle adapter and breaker accessories TE 104/106/300
Page 61
Supply cord TE 3000-AVR
Page 61
Chuck TE
Trolley TE 3000-AVR
www.hilti.co.za | 08000 23331
Page 39
Page 46
Breaker TE 1000-AVR
Page 38
Breaker TE 300-AVR
Breaker TE 500
Drilling & Demolition Contents Page
Page 35
Page 40
Combihammer TE 60-ATC-AVR
22
Page 35
Combihammer TE 40
Combihammer TE 60
Hilti. Outperform. Outlast.
Page 34
Page 39
Combihammer TE 50
2
Page 33
Combihammer TE 30
Rotary hammer TE 30-M AVR
Drilling & Demolition Systems.
Page 32
Page 61
Page 61
23
Trade
recommendation
Building construction
Electrical
Electrical / mechanical
Electrical / mechanical
Mechanical
Interior finishing
Industry / government
Trade
recommendation
Industry / government
Steel and metal
Mechanical
Steel and metal l
2
Steel and metal
Applications
Applications
Rec. chiseling ratio
Working directions
Working directions
• Anchoring in concrete
Tools
• Drilling in other materials
TE 1
TE 2/-M/S
SDS plus
Advantages
SDS plus
• Lightest and
smallest of all Hilti rotary hammers
• No complex
features
• Excellent handling
due to low weight
• Two drilling
speeds
• Drilling in other materials
TE 7 DRS
• Dustless drilling in sensitive
environments
Tools
TE 7 C
• Long lifetime
Advantages
• Powerful drilling
• Wide range of
accessories for
versatile use
• Wide range of
accessories for
versatile use
• Light chiseling
TE 40
SDS plus
• Long lifetime
• Powerful drilling
concrete
• Light corrective chiseling
TE 30/-C/-M
SDS plus
SDS plus
• Anchoring in
SDS plus
• High performance
for fast drilling and
easy chiseling
• Unmatched performance with
the entire TE-C
range
• Wide application
range (second
gear and chiseling)
• Maximum working comfort through
AVR
Weight of tool as per EPTA 1/2003 (kg) * 2.4 kg
2.7 / 2.7 / 2.9 kg
3.5 kg
Weight of tool as per EPTA 1/2003 (kg) * 3.5 kg
4.0 / 4.2 / 4.4 kg
Max. drilling range
4 – 18 mm
4 – 22 mm
5 – 28 mm
Max. drilling range
5 –28 mm
4 –28 mm
Optimum drilling range
4 – 12 mm
4 – 12 mm
8 – 16 mm
8 –16 mm
8 –20 mm
Battery capacity
-
Battery capacity
-
-
-
Additional features
Chuck interface, angular chuck
Additional features
Chuck interface, angular chuck
Chuck interface, 2nd gear
Chuck interface, AVR
DRS-M
TE 30-C/-M with AVR
Chuck interface, TE2-M, DRS-S
*As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.
24
5.5 kg
14 - 24 mm
*As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.
25
Electrical
Mechanical
Electrical
Mechanical
Mechanical
Trade
recommendation
Trade
recommendation
Mechanical
Interior finishing
Electrical
Mechanical
Mechanical
Electrical
Electrical
Mechanical
Applications
Applications
Working directions
2
Working directions
• Anchoring in
concrete
• Light chiseling
Tools
TE 50
• Anchoring and
coring in concrete
and masonry
• Anchoring, coring
and through holes
in concrete
• Chiseling and
channeling
• Chiseling and
TE 60
TE 70
demolition
• Hammer drilling in
concrete, masonry
and natural stone
in the 22 to 150 mm
diameter range.
• Chiseling and
demolition
TE 80
• Corrective chiseling
• Surface work to
remove plaster
tiles, concrete lines
etc.
Tools
TE 300
• Chiseling on
masonry and
concrete
• Wall demolition on
masonry brickwall
• Wall & floor
demolition on
masonry brickwall
• Channeling
• Heavy tile removal
on wall floor
TE 500
TE 700
TE 800
• Wall breaker with
excellent
performance-toweight ratio
• Highest impact
energy in 7kg
class (11,5J)
• Rated input power
1850 W
• Penetrations/
openings &
corrective chiseling
SDS plus
Advantages
• Lightest TE-Y
5kg-class
combihammer
• High performance multi-functional
tool
• The most powerful
combihammer in
its class
• Entry-level tool
with excellent
performance-toweight ratio
• ATC for extra
safety
• Safety orientation
thanks to ATC
• AVR for higher
comfort
• Extremely robust
• Best performanceto-weight ratio
Advantages
• AVR: lowest level
of vibration in its
class
• Very light and
compact tool for
daily use with long
trigger times
• Brushless SR
drive - outstanding
lifetime
• Power reduction more flexibility
• Full hammering
frequency 1890
impacts/minute
• Reduced impact
energy
Weight of tool as per EPTA 1/2003 (kg) *
5.7 kg
6.3 / 7.4 kg
7.7 /8.9 kg
10.2 kg
3.8 kg
5.6 kg
7.9 kg
10.5 kg
Max. single impact energy **
5.2 J
7.0 J
11.0 J
11 J
Max. single impact energy**
3.3 J
7.5 J
11.5 J
21 J
16 - 25 mm
18 – 30 mm
22– 80 mm
22-150mm
Additional features
Needle Adapter
AVR
Optimum coring range
45 - 68 mm
45 –90 mm
60– 150 mm
Additional features
DRS-S
ATC, AVR, DRS-S, DRS-B
ATC, DRS-B
Needle adapter
* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.
** Hilti values following preliminary EPTA Standard 05-2009.
26
Dust removal module (optional)
-
27
Trade
recommendation
Civil engineering
Civil engineering
Civil engineering
Notes:
2
Applications
Working directions
• Demolishing concrete and masonry
at floor level or below waist level
• Renovation of all
kinds of floors
Tools
Advantages
• Demolition and
penetrations at floor
level or below waist
level
• Breaking up asphalt for road building,
repair work and pipe laying • Unlike air tools, needs no compressor
therefore versatile
• Renovation of all
kinds of floors
TE 1500 AVR
TE 3000
• Top demolition
performance
thanks to high
impact energy
• Longer service
intervals due to
brushless SR
motor
• Minimal vibration - less than 7m/
s², i.e. over 4 hours permissible
trigger time
• AVR system for
higher productivity,
longer trigger
times and high
comfort
• AVR system for
higher productivity,
longer trigger
times and high comfort
TE 1000
• Maintenance -free SR motor
12.5 kg
14.2 kg
29.9 kg
Max. single impact energy**
26.0 J
30.0 J
68 J
Additional features
AVR, brushless SR motor
28
29
2
Hot stuff.
Accessories by Hilti for the workshop and jobsite.
All of your accessories from Hilti.
For drilling, grinding, cutting and fastening.
Many dishes need a touch of chili to bring out their full flavor. The same applies to
your tools in the workshop and on the jobsite – only with the right Hilti accessories
do they reach their full potential.
The Hilti Power Effect
Hilti tools plus Hilti accessories.
Total Performance.
We make our own
Research and development
We manufacture most of our
We go to great lengths to
innovative power tool acceseven further improve the persories ourselves. That’s why
formance, durability and life
we can guarantee, among
of Hilti accessories. In comother things, that a Hilti drill bit
plex tests, for example, we
will be replaced free of charge
confirm the life-expectancy
in the event of breakage – so
of our hammer drill bits under
long as the wear mark on the
the toughest conditions and
helix is still visible.
prove that they practically
Hilti. Outperform.
Outlast.
never get stuck when drilling
into rebars.
Health and safety
Cordless System
1+1=3
Hilti power tools and accessories are developed together,
tested together and are thus
perfectly matched. You therefore benefit from the Hilti
power effect – a level of system performance that adds
up to much more than just the
sum of its parts.
Drilling anchor holes
TE-CX / TE- YX
hammer drill bits
From page XY onwards
TE-C / TE- Y hammer drill bits
DD-BL diamond core bits
Working on metals
Cutting, grinding and
slitting
Special / universal performance
abrasive discs
Special / universal
performance
cutting discs
Recip saw blades
Special / universal
performance
slitting discs
Bimetal hole saws
Bit and socket
sets
Hot stuff. Accessories by Hilti: www.hilti.co.za
30
Drilling penetrations
DG-CW diamond
cup wheels
31
Drill UD 30
Rotary hammer TE 2
Key applications & advantages
■
■
■
■
■
Drilling in steel and sheet metal
Drilling in wood with auger bits, paddle
bits and Forstner bits
Various screwdriving jobs
Low weight for unique working comfort
Choice of keyless chuck with spindle
lock for single-hand operation or robust
key chuck
Rated input power
650 W
Number of gears
2
Rotation speed
gear 1 under no
load
Rotation speed
gear 2 under no
load
Max. torque
1200 rpm
Max. torque (soft
joint)
Weight according
to EPTA Procedure
01/2003
Working mode
51 Nm
A-weighted emission sound power
level1)
A-weighted emission sound pressure level1)
97 dB (A)
1)
Ordering designation
Package contents
UD 30 230V
1x Drill UD 30 230V, 1x Case
Technical data
■
■
■
3300 rpm
■
51 Nm (soft joint)
2.4 kg
Drilling only
86 dB (A)
according to EN 60745
Sales pack
quantity
Item number
211974
1 pc
Rotary hammer TE 1
■
■
■
■
Everyday hammer drilling in concrete,
masonry and natural stone
Reverse rotation is useful for removing
stuck drill bits
Single-mode SDS rotary hammer (hammer drilling)
Sturdy motor with high load rating for
maximum reliability
Package contents
TE 1 230V box
1x Rotary hammer TE 1 230V assy
TE 1 230V (4) cas
32
1x Rotary hammer TE 1 230V assy, 1x Case
TE 2 230V cas
Rotation speed
gear 1 under no
load
Weight according
to EPTA Procedure
01/2003
Working mode
1200 rpm
Number of gears
1
2
2.7 kg
Hammer drilling, Drilling
only
Optimum drilling diameter in concrete
- max.
- min.
Depth gauge
4 - 12 mm
Dust removal
module
Reversing switch
TE DRS-S (optional)
Package contents
12 mm
4 mm
Yes
Yes
Sales pack
quantity
1x Rotary hammer TE 2 230V
Item number
1 pc
3444065
1 pc
228080
383248
1 pc
1x Rotary hammer TE 2 230V, 1x Case
Rated input power
650 W
Weight according
to EPTA Procedure
01/2003
Working mode
2.4 kg
Number of gears
1
- max.
- min.
Depth gauge
4 - 12 mm
Dust removal
module
Reversing switch
TE DRS-S (optional)
■
■
Hammer drilling
■
12 mm
■
4 mm
■
Precision hammer drilling setting for
drilling in concrete and masonry as well
as brittle materials such as tiles and
stone
Ocassional drilling in steel, wood
and plastics using the optional chuck
adaptor
Triple-mode SDS rotary hammer (hammer drilling, drilling and precision hammer drilling)
maximum reliability
Yes
Yes
Sales pack
quantity
1 pc
COMBO TE2 3PACK
TE 2 230V box
Technical data
Rotary hammer TE 2-S
Technical data
1 pc
■
Ocassional drilling in steel, wood
and plastics using the optional chuck
adaptor
Driving screws using the optional bit
holder
Dual-mode SDS rotary hammer (hammer drilling and drilling)
maximum reliability
Item number
355439
405012
Package contents
TE 2-S 230V box
1x Rotary hammer TE 2-S 230V
Technical data
Rated input power
650 W
Rotation speed
gear 1 under no
load
Weight according
to EPTA Procedure
01/2003
Working mode
1200 rpm
Number of gears
1
2.7 kg
Hammer drilling, Drilling only, Fine hammer
drilling
- max.
- min.
Depth gauge
4 - 12 mm
Dust removal
module
TE DRS-S (optional)
12 mm
4 mm
Yes
Sales pack
quantity
1 pc
Item number
383250
33
Rotary hammer TE 2-M
Rotary hammer TE 7
■
■
■
■
■
2 gears for optimal drilling speed in
steel, wood and plastics using the
optional quick-release chuck
Driving screws using the optional bit
holder
Triple-mode SDS rotary hammer (hammer drilling plus 2 gears for rotary-only
drilling)
maximum reliability
Package contents
TE 2-M 230V cas
1x Rotary hammer TE 2-M 230V, 1x Quick-release chuck assy, 1x Case
Technical data
Rated input power
650 W
Rotation speed
gear 1 under no
load
Weight according
to EPTA Procedure
01/2003
Working mode
1200 rpm
Number of gears
2
■
■
■
2.9 kg
- max.
- min.
Depth gauge
4 - 12 mm
Dust removal
module
TE DRS-S (optional)
■
12 mm
4 mm
Yes
Sales pack
quantity
1 pc
■
only
Drilling and hammer drilling in concrete
and masonry
Occasional drilling in wood and steel
with optional quick-release chuck
Drilling in concrete in clean areas using
the integrated dust removal system
(DRS-M)
Ergonomically designed D-grip for comfortable use over long periods
Robustly built and superbly engineered
for maximum reliability and long life
Item number
228106
Package contents
TE 7 230V box
1x Rotary hammer TE 7 230V
TE 7 230V +DRS cas
Technical data
Rated input power
710 W
Rotation speed
gear 1 under no
load
Weight according
to EPTA Procedure
01/2003
Number of gears
1050 rpm
- max.
- min.
Depth gauge
4 - 12 mm
Dust removal
module
Reversing switch
TE DRS-M (optional)
2.9 kg
1
12 mm
4 mm
Yes
Yes
Sales pack
quantity
1x Rotary hammer TE 7 230V, 1x Dust removal module TE DRS-M, 1x Case
2
1 pc
Item number
428643
428645
1 pc
Rotary hammer TE 7-C
■
■
■
■
■
34
Drilling and hammer drilling in concrete
and masonry
Corrective chiseling and small channel
openings in concrete
Occasional drilling in wood and steel
with optional quick-release chuck
Ergonomically designed D-grip for comfortable use over long periods
Robustly built and superbly engineered
for maximum reliability and long life
Package contents
TE 7-C 230V
1x Rotary hammer TE 7-C 230V, 1x Chuck assy, 1x Case
Technical data
Rated input power
720 W
Rotation speed
gear 1 under no
load
Weight according
to EPTA Procedure
01/2003
Working mode
740 rpm
Number of gears
1
3.4 kg
only, Chiselling, Chisel
setting
- max.
- min.
Depth gauge
6 - 16 mm
Dust removal
module
TE DRS-M (optional)
16 mm
6 mm
Yes
Sales pack
quantity
1 pc
Item number
202928
35

Drilling and Demolition Part 2 4872.7kB

Transcription

Similar documents

Certificate of Registration Xact Spec Industries LLC

Certificate of Registration Xact Spec Industries LLC

TE 2 TE 2-M TE 2-S

CAODC Fall Conference Drilling Division, Nisku September 12, 2013

Solutions brochure template

Exploration Update - Windward Resources

Ensuring sustained benefits for local communities from geothermal

577843-06 D25102 manual.indd - Service

Mærsk Gallant - Maersk Drilling

Untitled - Global Drilling Support