for SR Adoro - Ivoclar Vivadent

ISSUE #87 November 2011
Predictability of pricing – update service
when pricing changes
Diligent stock keeping
Bringing the latest developments in alloy
technology to you – optimising properties
and constituents to ensure best price /
performance ratio wherever possible
Framework Design Manual
Alloy Processing Manual
Comprehensive Alloy Properties Manual
Troubleshooting Poster
Large range to suit all needs
and provide options
Prosthetics
SR Vivo TAC® / SR Ortho TAC®
For the exact determination of the position of implants
The radiopaque tooth is a prefabricated tooth with
a radiopaque effect on X-rays. Clinicians are able
to identify the outline and position of the tooth, as
it is clearly distinguishable from the natural tooth
structure. This tooth is used by dental technicians in
conjunction with drilling templates as a diagnostic
instrument for clinicians.
• Time is saved in fabricating stents, as the teeth are
prefabricated
• The positioning of implants is facilitated
• Consistently high radiopacity is ensured
• The moulds correspond to the familiar
SR Vivodent PE and SR Vivodent / SR Orthotyp
tooth lines
• The tooth shape and length can be modified with
Modifier Polymer and Monomer which is also
radiopaque
• The teeth bond well with clear heat and coldcuring polymers to complete the stent
SR Vivo TAC
Pre-implantological radiodiagnostics
The set-up of radiopaque teeth enables the dentist to establish the axial implant position in
relation to the established bone substance.
The radiopaque teeth SR Vivo TAC
/ SR Ortho TAC offer an efficient
solution for determining the future
placement, location and angulation
of implants.
The consistently high radiopacity is achieved in
the industrial fabrication process. The innovative
SR Vivo TAC / SR Ortho TAC teeth allow the
diagnostic steps needed for planning the
placement of implants to be conducted carefully.
Finished stents for the upper and lower jaws.
SR Vivo TAC
Technique
Guide*
Upper anterior teeth: A15, A24B, A25, A27
Lower anterior teeth: A4, A8, A9
By choosing these moulds a wide range of
indications can be covered. In special
cases the teeth can be easily adjusted.
Modifier
SR Ortho TAC
Forms N2-N6 for the upper and lower
posterior teeth, in the same moulds as for
SR Orthotyp posterior teeth.
2
Self-curing composite,
which is supplied as a
monomer and a polymer.
Barium sulfate is added as
radiopaque material.
Prices do not include GST or Freight & may change without notice
Prices are not applicable to Government or Corporate Accounts E & OE
Special
Edition*
* Both publications
available on request
These monthly specials are available while stocks last or until the next
publication of IVOLAB Prices valid from 1 – 30 November 2011
Equipment
Lumamat 100… for SR Adoro®
The Lumamat 100 light furnace has been specifically developed for the polymerisation
and tempering of the SR Adoro material.
The Lumamat 100 combines light with an electronically controlled heater. With the
controlled light/heat tempering process, the optimum material properties of the SR
Adoro veneering material can be achieved. The Lumamat 100 is a component of the SR
Adoro System and is used to cure and temper the
light-curing SR Adoro veneering composite.
Moreover, other light-curing resins can be
polymerised without heater (program 2 and 4).
• “Up-and-back” opening mechanism
• Integrated counter for the operating hours
• New object holder with limiter for the tempering
area
• Standard programmes (P1-P3) for SR Adoro
• Integrated viewing window
• Easy changing of the lamps
• PC and printer connection
• Possibility to control the temperature and light by
means of the L100 Test Set
Twister Vacuum
Mixing Unit
Manual operation
All mixing parameters are quickly and easily
entered. The high performance motor and high
quality vacuum pump guarantee homogenous
and bubble-free mixing results for dental plasters,
investments and silicones.
Reliable, hands-free mixing at its best!
• Includes 500ml bowl
• Alginate mixing bowl & paddle also available
• R1826-0000
Artex® Articulators
Artex CN – Non-Arcon Design
• Artex-Carbon - lightweight,
robust, ergonomic and highly
precise
• Simple and pleasant handling
• 3 working positions,
no tipping over
• “Click” - centric quick lock
• Fixed average condyle track
inclination at 35°
• Bennett angle adjustable
from 0 to 20°
Note: 1 of each in stock
These monthly specials are available while stocks last or until the next
publication of IVOLAB Prices valid from 1 – 30 November 2011
Renfert Power Pillo
Pneumatic deflasking chisel
• Safe for the restoration - plaster and investment are
chiselled in a controlled way and set under vibration so the
structure almost breaks apart of its own accord
• Safe for the joints - thanks to the best possible relationship
between mass and impulse strength, the Power Pillo
compensates vibration so the hand is not affected
• R5022-5000
Artex CP – Arcon Design
• Partially adjustable Arcon articulator
with super smooth condyle track guide
• Artex-Carbon - lightweight and robust,
providing perfect handling
• 3 working positions, no tipping over
• High-precision and robust centric quick
lock via mechanically guided semi axis
• Arbitrary pins for direct transfer with the
Artex facebow
• Adjustable inclination of the condyle track
inclination from -20° to +60°
• Bennett angle adjustable from -5° to +30°
• Distraction permitting release of
compressed mandibular joints from
0 to 3mm
• Arcon clip prevents separation of upper
and lower articulator parts while centric
is open
Prices do not include GST or Freight & may change without notice
Prices are not applicable to Government or Corporate Accounts E & OE
3
Crown & Bridge
SR
Adoro® Step by Step
oro
d
A
R
S
f
15% of posite
Com
SR Adoro on ZiO2
1. Framework design
3. Applying the Liner
The framework reflects the reduced anatomical tooth
shape. As a result, the composite can be applied in
an even layer and will consequently be appropriately
supported. Sinter & blast with 100 micron sand at
1 bar.
Extrude the desired amount of the ready-to-use Liner
paste from the syringe and spread it out slightly
on the mixing pad using a disposable brush. Make
sure to fully cover all areas, as the Liner provides an
essential bonding surface to the luting composite. The
Liner layer must be at least 150 microns thick and has
to be precured for 20 seconds per segment using the
Quick curing light.
Milled IPS e.max ZirCAD framework
2. Conditioning with SR Link
Apply SR Link immediately after having tapped off
the blasting residue. Use a clean disposable brush to
apply SR Link to the veneering surfaces and allow to
react for 3 minutes. Do not “soak” zirconium oxide
surface in SR Link.
5. Final Polymerisation /
Tempering
Apply SR Gel on the entire veneering surface ensuring
that all areas are fully covered, but not too thick, and
cure.
Coat with SR Gel and mount on the object holder
Apply the liner to the active framework and
remove the inhibition layer with a disposable
sponge after curing
4. Dentine / Incisal Layering
The individual SR Adoro pastes are layered in
accordance with the layering diagram. Adapt the
1st SR Adoro layer (e.g. Dentine) firmly to ensure an
effective bond between the composite and the Liner
surface & precure each segment for 20 seconds using
the Quick curing light.
6. Finishing / Polishing
Finish the restoration with cross-cut tungsten
carbide burs, fine diamonds and flexible discs. For
prepolishing, smooth out the surface with rubber
polishers and silicone polishing wheels. High-gloss
polish with a goat hair brush, cotton or leather buff,
as well as Universal Polishing Paste.
Apply SR Link immediately after the blasting
procedure
Apply dentine, deep dentine and incisal materials
Completed SR Adoro restoration on the model
2. Application of SR Adoro
Gingiva materials
5. Final Polymerisation /
Tempering
Once the veneering surface has been conditioned,
directly commence with the application of the SR
Adoro Gingiva materials in accordance with the
individual shade selection.
Apply SR Gel on the entire veneering surface ensuring
that all areas are fully covered, but not too thick, to
prevent the formation of an inhibited layer before
polymerisation / tempering in the Lumamat 100 with
light and heat at 104 °C.
Condition the ceramic surface by blasting or etching
it with IPS Ceramic Etching Gel. Apply Monobond
Plus & let it react for 60 sec. Apply Heliobond in
a thin layer immediately after that, disperse with
compressed air, and cure for 60 sec. with the Quick
curing light.
Example of a possible individual layering diagram
Start with the more intensive gingiva shades applied
on the fired opaquer to achieve the corresponding
in-depth effect. Towards the surface, lighter,
more transparent materials provide for a lifelike
appearance. Subsequently, precure each individual
layer for 20 sec per segment – using the Quick curing
light.
Coating with SR Gel
Application of Monobond Plus and Heliobond.
Gingiva layering with SR Adoro Gingiva materials
(G1–G5)
SR Adoro for Gingiva
1. Framework design
The portion to be veneered with Gingiva material has
to be included into the contouring of the framework.
The ceramic opaquer is applied on both areas of the
tooth and the gingiva components.
Completed veneers of IPS InLine metal-ceramic
Activating the ceramic surface:
4
Prices do not include GST or Freight & may change without notice
Prices are not applicable to Government or Corporate Accounts E & OE
6. Finishing / Polishing
Rubber polishers are used for prepolishing and
silicone polishing wheels to smooth the surface. Highgloss polishing is performed with a goat hair brush,
cotton or leather buff and Universal Polishing Paste.
Completed restoration after polishing
These monthly specials are available while stocks last or until the next
publication of IVOLAB Prices valid from 1 – 30 November 2011
Crown & Bridge
High end aesthetics… in your hands!
f
15% of wders,
N Po ds
G
I
S
.
d
S
IP
iqui
L
&
s
e
t
Pas
IPS
d.SIGN® Ceramic - Technique Guide
Photos courtesy
of Gerald Ubassy
First opaquer layer
First, the orange-brown opaque Dentine is
applied to the proximal areas. The brown
Occlusal Dentine material is applied over it to
prevent light from falling too rapidly on the
proximal side. It increases the saturation to match
that usually observed in these areas in natural
teeth
Second opaquer layer
Application of the first Margin material. Mixing
of 4 parts Margin B4 + 2 parts Margin Opaque
to increase the level of opacity. In general, add
approx 30% Margin Opaque. Areas that absorb
light and others that reflect light are visible
Appy thin layer; 3 parts Deep Dentine A3 + 1 part
Dentine A3 to block coping outline
Application of the light absorbing material: 1 part
E violet + 1 part T brown-grey
Application of Effect E1. The material must be
applied relatively thickly on the entire incisal area
to be most effective
Gerald Ubassy
Technique Guide
available on
request
The result after the first firing cycle: the teeth
should look shiny, but the texture of the ceramic
should still be evident
The shape is adjusted with a film of Effect E1
Dentine A3 is applied to the cervical third of the
tooth
A thin layer of Transparent Neutral is applied to
the surface to help reproduce the appearance of
the highly translucent enamel
Result after the second firing cycle
Section 1: Application of the cream coloured
reflective material A2. Section 2: Application of
a translucent reflective mixture on the remaining
third (1 part cream coloured reflective material +
1 part T Neutral)
To accentuate the effect of light diffraction on
the incisal edge, a small amount of the Dentine
material has been applied. In this case cream
coloured reflective material was used.
These monthly specials are available while stocks last or until the next
publication of IVOLAB Prices valid from 1 – 30 November 2011
Finished restoration highlights the optical
qualities of the IPS d.SIGN ceramics
Prices do not include GST or Freight & may change without notice
Prices are not applicable to Government or Corporate Accounts E & OE
5
Consumables
Hinriplast® N
Natural stone resin-reinforced Type 4
Resin reinforced, fine-flowing super hard stone for
the highest technical requirements with extremely
smooth surface and excellent edge stability.
• Specially developed resin additives provide longer
stability in storage
• 106709 (apricot)
106809 (ivory)
* FREE Ernst
106909 (pearl-grey)
Golden Brown colour
coming soon!
Hinrichs
Statuette with every
purchase of
25kg Hinriplast N this month
“Mike” photo courtesy of Riccarton Orthodontic Practice
FUN…
with the EH GANG!
Photograph Ecki, Manni, Backi, Rudi or Mike
as they go about their business and email
the pics to admin@ivoclarvivadent.co.nz.
PRIZES to be won for the most
imaginative photos.
GEO Crowax
• All-purpose wax – available
in Green-transparent,
Blue-transparent, Redtransparent, Beige-opaque,
Grey-opaque
• R474
Buy 1 GEO Crowax
and receive a FREE
Size 6 Basic Line Brush
Polisoft
Wheel
For optimum prepolish alternative to rubber or
silicone wheels on any alloy. Long lifespan and
minimal dust or odour.
• Quickly smooths all metal surfaces e.g.
coping collars
• No heat generation, silky
shine
• R91-0000 (22 x 3mm)
(Worth $29.00)
Wax wire
Squirrel Hair Brush
Available in:
2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm & 5.0mm
• Fine, wide surface brush for smoothing
and cleaning
• R1712-0000
6
Prices do not include GST or Freight & may change without notice
Prices are not applicable to Government or Corporate Accounts E & OE
Medium
Hard
R678-3020
R678-3025
R678-3030
R676-2030
R676-2040
R676-2050
These monthly specials are available while stocks last or until the next
publication of IVOLAB Prices valid from 1 – 30 November 2011
Consumables
Crown Membrane Boxes
3”, 2” or 1” sizes
NEW
1” - 10 Boxes
1” - 50 Boxes
2” - 10 Boxes
2” - 50 Boxes
NEW
WHW High Impact Acrylic
• Powder & Liquid
• Shade: Natural
3” - 10 Boxes
NEW
WHW
Colacryl
Soft reline system.
• 180g Powder
& 70ml Liquid
WDMS Metal Hinged
Articulators
Chocolate Bar Bonus!
• Small, Medium & Large
Free chocolate bar with
every order over $60.00
(Limit of one chocolate
bar per order)
…partner for precision
Diamond
Burs
807
025 /104
830
023 /104
859
010 – 018 /104
863
012 – 016 /104
Tungsten
Burs
HM21
010 – 023 /104
HM77
050 – 060 /104
These monthly specials are available while stocks last or until the next
publication of IVOLAB Prices valid from 1 – 30 November 2011
HM77EX
023 /104
Contact your local
Territory Manager to
see the latest
Bur Folder &
Catalogue.
View the full
range of
Tungstens,
Diamonds,
Grinders &
Polishers
available!
HM79
040 – 070 /104
Prices do not include GST or Freight & may change without notice
Prices are not applicable to Government or Corporate Accounts E & OE
7
Alloys
Compositions and Physical Properties
Au
Crown and
bridge alloys
Predominantly
base alloys
Ga
Sn
CTE
Density
77.2 <1.0
–
12.7 8.5
76.8
–
<1.0 12.8 8.3
74.0
–
3.8 12.0 9.0
70.7 3.6
–
13.7 10.0
Pt
Pd
Ag
–
–
–
–
–
–
–
1.0
–
–
–
–
15.9
15.2
15.9
15.6
2
2
2
4
10.0 13.8
16.1 15.7
26.3 8.5
47.0 7.5
–
–
–
–
–
–
–
–
–
–
–
–
15.9
13.9
13.9
12.4
4
4
3
4
15.0 40.0 10.0
25.0 58.3 14.7
–
–
2.0
–
–
–
10.8
10.4
3
4
–
–
–
–
4.1
1.0
–
2.4
7.5
13.9 - 14.0
14.0 - 14.3
14.5 - 14.8
17.6
12.6
10.8
4
4
4
High
gold
content
Reduced
gold
content
Harmony® X-Hard
XL-X®
Maxigold®
Minigold®
Yellow
Yellow
Yellow
Yellow
68.3
62.8
59.5
40.0
2.9
–
–
–
Solarcast® 20*
Elektra®
Yellow
White
20.0
–
–
–
White
White
White
–
78.6 9.7 7.9
33.0
–
52.8 7.2
2.0 <1.0 60.0 25.2
Containing
Pd-silver
Ceramic bonded
alloys
Rich Yellow
Rich Yellow
Yellow
Yellow
Academy Gold™
Harmony® Medium
Harmony® Hard
Academy Gold™ XH
Implant
Callisto® Implant 78
Callisto® Implant 33
Callisto® Implant 60
NEW
–
–
–
–
–
2.0
9.0
<1.0
–
–
–
–
<1.0
–
–
–
–
–
–
–
–
<1.0
<1.0
–
–
<1.0
2.0
–
14.8 - 15.0
14.4 - 14.7
14.5 - 14.8
14.3 - 14.6
14.1 - 14.4
14.0 - 14.3
14.3 - 14.5
19.0
18.8
18.5
18.9
17.9
16.4
16.7
2
3
4
4
4
4
4
White
White
White
60.0
51.5
40.3
–
–
–
–
–
9.2
–
–
–
–
–
–
–
–
–
14.2 - 14.4
14.1 - 14.3
14.2 - 14.5
14.3
13.7
12.8
4
4
4
White
White
White
White
White
4.0
2.0
2.5
–
–
–
–
–
<1.0
–
1.7
9.0
4.2
–
–
10.0
–
9.3
7.7
–
13.9 - 14.2
14.3 - 14.6
13.9 - 14.2
14.8 - 14.9
14.4 - 14.9
10.8
10.7
10.7
10.7
8.9
4
4
4
4
5
White
White
White
White
White
Ni
Co
Cr
Mo
Al
Si
65.6
–
20.1
1.3 2.4
3.3
61.4
–
25.7 11.0 <1.0 <1.0
58.7 <1.0 25.0 12.1
–
1.7
–
60.2 30.1 <1.0 <1.0 <1.0
<1.0
–
59.0 25.5 5.5
–
W
7.1
–
–
–
5.0
14.0 - 14.5
13.9 - 14.1
13.9 - 14.2
14.5 - 14.7
14.2 - 14.5
8.2
8.4
8.3
7.8
8.5
5
4
3
5
5
High
gold
content
Rich Yellow
Rich Yellow
Rich Yellow
Rich Yellow
Yellow
White
Yellow
Reduced
gold
content
IPS d.SIGN® 91
Lodestar®
Evolution® Lite
Containing
Palladium
IPS d.SIGN® 67
Spartan® Plus*
Callisto ® 75 Pd
IPS d.SIGN® 53
Callisto® CP+*
NEW
Colado® NC
4all ®
Cobalt-nickel
IPS d.SIGN® 15
based
IPS d.SIGN® 30
Colado® CC
30.6
38.5
39.3
62.7 20.0
–
78.8
–
10.0
75.2
7.1 –
–
53.8 34.9
–
–
25.0
*Patented
Prices do not include GST or Freight & may change without notice
AUCKLAND (Head Office)
Phone: 0-9-914 9999
Fax: 0-9-914 9990
E & OE
WELLINGTON
Phone: 0-4-473 2787
Fax: 0-4-473 2656
Website: www.ivoclarvivadent.co.nz
Type
–
96.3 2.6
–
88.9 9.0
86.1 8.5 2.6
–
85.9 12.1
82.8 9.0 5.0
75.0 2.0 16.8
73.8 8.5 5.4
Brite Gold™
Brite Gold™ XH
Aquarius Hard
IPS d.SIGN® 98
Aquarius XH
Sagittarius
IPS d.SIGN® 96
NEW
3.6
3.9
2.7
4.0
Cu
CHRISTCHURCH
Phone: 0-3-366 0025
Fax: 0-3-377 1625
Email: orders@ivoclarvivadent.co.nz
FREEPHONE: 0508 486 252