DIATHERMIC OIL MULTITUBULAR THERMAL HEATER

DIATHERMIC OIL
MULTITUBULAR THERMAL HEATER
HOKh
Capacity from 1.500.000 to 12.000.000 Kcal/h
INDUSTRIAL BOILER ITALY S.R.L.
Offices and Production Unit: Via E. Fermi, 64/66 - 24050 GRASSOBBIO (BG)
Cod. Fisc. / P.IVA 04024170161 REA: BG-428870
www.industrialboileritaly.com - info@industrialboileritaly.com
Tel: +39 035 0521398 Fax: +39 035 0521 443
DIATHERMIC OIL
HOKh
Description
Standardkessel’s thermal oil heater
HoKh are the best example of the
diathermic oil heater construction.
pressure losses and either to reduce
the power of the oil circulation
pump.
This kind of construction has an
experience of over 50 years in this
specific field with many installations
all over the world.
The pressurized flue gas seal is
obtained thanks to a strong body
shell with dilatation joints.
The thermal heaters HoKh are
completely built in our factory by
using
the
best construction
technologies with high qualified and
specialized staff.
The Standardkessel thermal heater
HoKh, in addition to the long
working life, are particular for the
following reasons:

Low atmospheric emissions
Standardkessel is proud of having a
plenty of HoKh installations which
have been running for over 30 years.

High
efficiency
with
the
possibility to increase it up to
93% with an economizer
The thermal heater HoKh is
composed of a parallelepiped
combustion chamber with many
pipes. The perfect design, due to the
direct combustion, allows a good
circulation and a total absorption of
the radiations.

No refractory material

Long working life of the
diathermic fluid thanks to the
perfect oil speed into the heating
body

Reliability thanks to the many
experience and proven by the
installations located worldwide
On the high volume combustion
chamber room is placed the flue gas
area where the oil speed has been
decreased in order to reduce the oil
DIATHERMIC OIL
HOKh
Boiler dimensions
Model
HoKh
Capacity
Kcal/h
A
mm
B
mm
H
mm
C
mm
I/U DN
Drain
DN
A1
mm
B1
mm
1500
1.500.000
1350
4200
2900
400x780
125
25
400
1200
1800
1.800.000
1600
4200
3000
400x780
125
25
400
1200
2000
2.000.000
1600
4200
3200
400x900
125
25
400
1200
2500
2.500.000
1750
4200
3400
400x1200
125
25
450
1200
3000
3.000.000
2000
4400
3800
400x1200
150
25
450
1200
3500
3.500.000
2200
4400
3800
550x1400
150
32
450
1200
4000
4.000.000
2300
5100
4000
650x1450
150
32
500
1200
4500
4.500.000
2300
5200
4000
650x1450
150
32
500
1300
5000
5.000.000
2300
5500
4000
650x1450
150
32
500
1300
6000
6.000.000
2600
5800
4000
650x1600
200
32
600
1300
7000
7.000.000
2600
6000
4000
650x1600
200
32
600
1300
8000
8.000.000
2800
6400
45200
650x1600
250
32
600
1500
10.000
10.000.000
3000
7000
4400
650x1600
250
40
700
1500
12.000
12.000.000
3000
8000
4400
650x1600
250
40
700
1500
Industrial Boiler Italy reserves the right to make the necessary changes to improve the production
Pos.
Description
Pos.
Description
1
Burner
6
Chimney
2
Diathermic oil I/O manometer
7
Differential pressure gauge
3
Diathermic oil inlet
8
Fan
4
Diathermic oil outlet
9
Back blowdown
5
Control board
10
Front blowdown
From the commitment in the technological research of Standardkessel
Italiana and Standardkessel International, always specialized in the high
powered industrial boilers, are born the SKI generators which are carried
out by means of innovative processes that ensure a high efficiency and a
long lifespan.
Water-tube, smoke-tube, diathermal-oil industrial boilers and complete
thermal power plants.
INDUSTRIAL BOILER ITALY S.R.L.
Offices and Production Unit: Via E. Fermi, 64/66 - 24050 GRASSOBBIO (BG)
Cod. Fisc. / P.IVA 04024170161 REA: BG-428870
www.industrialboileritaly.com - info@industrialboileritaly.com
Tel: +39 035 0521398 Fax: +39 035 0521 443