Digital TV Equipment and System

Transcription

Catalogue 2015
Professional IRD
Encoder & Transcoder
Remultiplexer/Scrambler
Modulator & Transmodulator
Modular Headend System
IPTV Solutions
DTTV Transmitter
Terminals
Contents
Professional Headends
Professional IRDs
DCH-3100P
DCH-4000P
DCH-5200P
DCH-5500P
DXP-3400P
DXP-3800D
DXP-3440DP
DXP-3440DM
01
04
07
11
15
18
21
24
Encoder & Transcoders
DCH-3000EC
DCH-5200EC
DXP-3800EC
DXP-4800EC/4801EC
DXP-5800EC/5801EC
DXP-3410EM
DXP-4410EM/4411EM
DXP-5410EM/5411EM
DIH-4000V
27
29
31
33
35
37
37
37
40
Re-Multiplexers
DCH-3000MX
DCH-5100MX
DXP-3800MX
Modulators
DCH-3000TM
DCH-5100TM
42
44
46
DXP-3000IM
48
51
54
Accessories
DCH-2000AD
DCH-2000AV
DCH-3000AL
56
58
60
Modular Digital TV Headend
IRDs
DMM-1510P
DMM-2200P
DMM-2410D
65
68
70
Encoder&Transcoders
DMM-1300EC
DMM-1520EC
DMM-2400EC/2401EC
DMM-2410EC/2411EC
72
73
75
77
Re-Multiplexer&Scramblers
DMM-1400MX
79
DMM-2200MX/2200DX
DMM-2200TP
81
83
Modulators
DMM-1300TM
DMM-1400PM
DMM-2400TM
84
85
87
Modular Analog TV Headend
DMM-1701PM
DMM-1701IM
DMM-1701M
DMM-1710PM
DMM-1701LD
DMM-1701CA
CATV Modulator Bank
SMA-1600M
SMA-1600M-UV
SMA-1600EM
STBs
DHC-3601
F975FSC
G966
DTTV Modulator
Tenor-GAF2
Bossa-GAF
DTTV Transmitte
Symphony-130W
Symphony-400W
Symphony-900W
Symphony-1500W
Antenna
ANT-U-P-11
ANT-U-T-6
ANT-U-T-10
TAO-8P1/12P1
Terminal
Tim-Dongle
Tim-Phone-T2
STB
Timbox-Combo
VIP-Timbox+
Test and Measurement
IPM-16
Tango-T2
92
92
92
95
97
98
100
100
101
103
104
106
107
109
111
113
115
117
119
120
121
122
124
126
127
129
131
133
Company Profile
The Company
Founded in 1994, PBI (Pro Broadband Inc.). manages to develop and manufacture high quality and state-of-theart products to meet the digital market demands. With over 20 years of expertise in consumer electronic software
and hardware engineering, PBI embarks on an advanced design, manufacturing and integration program in the
industry of Digital Multimedia, Broadband Access, and Wireless Communications.
Technology
PBI leverages its core hardware and software technology across three fast growing markets: Digital Multimedia,
Broadband Access, and Wireless Communications. PBI's technology is based on years of research and
development experience in DVB and MPEG standards. We have made significant investments in developing
software for conditional access,common interface, interactive middleware and addressable signal decoding. We
have successfully achieved a high level of embedded system integration in digital CATV headend broadcasting
system, household IRDs, and microwave accessaries. In addition to technical proficiency, our product development
benefits from world-class, cost efficient engineering and has strong relationships with key industry players such as
ST, NEC, OKI,Panasonic Siemens, Philips,Nagra,Irdeto, Viaccess, and so on.
Products
Committed to the development of headend production, PBI has a world-wide application in the digital and
analog CATV network. The digital headend equipments range from MPEG-2 digital encoder, digital multiplexer,
professional QPSK/QAM transmodulator, QPSK/QAM modulator to scrambler; the analog headend equipment
varies from adjacent modulator, FM radio modulator and combiner etc. All headend equipment are in line with
national standards of China and have been certified by the National government firm CCC and SARFT.Equipped
with an advanced and specialized production base and certified by ISO 9001 and ISO 14001 system, PBI is a
professional STB manufacturer. PBI's products include digital Satellite/Cable/Terrestrial STBs, HDTV receiver,
IP+DVB receivers, Mobile television receiver, and PVR receiver. Integrated varied CA system and middleware, PBI
STB enables program encryption and interactive applications. PBI is also a full range C/Ku-band LNB manufacturer
for all different applications in the whole world.
Low-Cost Operations
At PBI, we leverage talent and resources around the great China area to develop, manufacture and market our
products. Product development is done in Beijing , tapping a wealth of highly trained, cost-efficient resources.
Project management is planned in Chung-Li (Taiwan Silicon Valley), gathering sufficient material/components
and fast marketing information environment. Manufacturing is performed by PBI ISO qualified factories in China .
Further R&D outsourcing is obtained from selected software/firmware partners in India , China , Taiwan and France
. PBI management team works together to set strategy and guide the company at cost efficiency to meet the
worldwide markets competition.
Service
PBI emphasizes services by providing fast reaction and on-time delivery to meet customers'needs. Hardware has
become a basic tool since the digital information era has begun, thus, the quality of the software is also what we
promise to PBI users. With our prompt product logistics, we are able to build a fast reaction, on-time engineering
service, and low-cost manufacturing hub in Asia for our OEM/ODM customers.
The 21st Century Target
We build ourselves as our customers'own affiliated R&D and manufacturing center in Asia . We have made every
effort and investment in R&D, production, inventory and logistic resources to fulfill custom-design requirement.
Nevertheless, our best performance is our customers'satisfaction. We will continue to make every possible effort
to achieve our corporate goals - a major OEM/ODM supplier in Asia at Digital Multimedia, Broadband Access, and
Wireless Communications. So Please, Team-up with PBI-Brighten Your Digital View!
DCH-3100P
The DCH-3100P is a cost effective
professional integrated receiver decoder.
It is widely used in the satellite, cable
and terrestrial TV network with different
tuner frontend DVB-S2/S, DVB-C and
DVB-T/T2. It demodulates the RF signal
to the transport stream with ASI. With
dual DVB common slots, DCH-3100P
works with most of the well known CAS
in the market and decrypts multiple
services in a transport stream. The on
board decoder can process a variety of
digital video and audio formats in MPEG4 AVC/H.264 and MPEG-2, in Standard
Definition and in High Definition. The TV
channel is decoded to digital and analog
outputs, HDMI, YPbPr, CVBS, balanced
and un-balanced audio. The powerful
demodulation, decryption and decoding
capabilities, combined with user friendly
WEB GUI and SNMP based remote
control makes this equipment one of the
most competitive professional IRD in the
market.
Professional IRDs
HD 4:2:0 IRD
Main Feature
• Multiple tuner inputs DVB-S2/S, DVB-C,
• Rich Analog and Digital Outputs including,
and DVB-T/T2
CVBS, YPbPr, HDMI, XLR
• 2x DVB-CI Slots, Multi Programs, BISS-1
• Remote Control and Supervision by
and BISS-E decryption
SNMP, HTTP WEB and Proprietary HDMS
• Transport stream output from ASI
software
• SD/HD MPEG-2 and MPEG-4/H.264 digital
• Dynamic PMT auto detection and updating
video decoding
• Support VBI TELETEXT, EBU/ DVB
• Two digital audio channel decoding of
Subtitle, Closed Caption
MPEG1 Layer II and AAC
• Configuration save and load after power off
Optional HDMI for HD
output
DVB-S/C/T
Dual DVB Common Interface
and Multi Programs
decryption
DCH-3100P
Professional Digital IRD
EPG, MHP, DATA Server
DVB-S/S2/C/T
DVB-S / C / T
DCH-3100P
Professional Digital IRD
HFC
DCH-3000MX
DCH-3000TP
DVB TS ReMultiplexer
DCH-3000TM
DVB TS Scrambler
Digital Agile QAM Transmodulator
AV
DCH-3000EC
MPEG-2 Encoder and ReMultiplexer
AV
Ethernet management
DCH-3000EC-41
4-in-1 MPEG-2 Encoder and ReMultiplexer
HDMS
TM
Device Management System
CAS
No.3 Feng Zhi East Road, Xi Bei Wang Town, Hai Dian District, Beijing, 100094, China
Tel: +86-10-57802000 Fax: +86-10-57802016 E-mail: sales@pbicn.com
1
Professional IRDs
Specification
Tuner Input
DVB-S/S2 Tuner Input
Connector Type
Input Frequency Range
Input Level
Symbol Rate
Roll Off Factor
Punctured Rates
LNB Polarity Selection Voltage
LNB Band Selection Tone
Satellite Selection Command
DVB-C Tuner Input
Connector Type
Input Frequency
Input Level
Symbol Rate
Constellation
Bandwidth
Input Return Loss
DVB-T/T2 Tuner Input
Connector Type
Input Frequency
Input Level
Constellation
Bandwidth
FFT Mode
Guarding Interval
FEC Code Rate
Input Return Loss
TS Processing
Descrambler
BISS Mode
Common Interface
Number of Outputs
Sampling Rate
Audio Bit Rate
1×F type female 75Ω for Input, 1×F
type female 75Ω for loop through output
950~2150MHz
-25~-65dBm
2~45MBaud/s for QPSK and 8PSK
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 8/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,9/10
0, 13V, 18V selectable
0/22KHz selectable
DiSEqC 1.0
Analog Video Output
YPbPr Connector
CVBS Connector
Video Standard
YPbPr Resolution
Signal Level
Frequency Response
48~860MHz
45~75dBμV
1~7MBaud (ITU J.83 Annex A)
16/32/64/128/256QAM
6MHz/7MHz/8MHz
7dB (typ.)
Chroma-Luma Delay
Field Time Distortion
Line Time Distortion
Short Time Distortion
Differential Gain
Differential Phase
Signal to Noise Ratio
Analog Audio Output
Connector type
Output Impedance
Output mode
Number of Outputs
1×F type female 75Ω for Input, 1×F type
female 75Ω for loop through output
104 ~ 862MHz (VHF/UHF)
-20 ~ -70dBm
DVB-T: QPSK, 16QAM, 64QAM
DVB-T2: QPSK, 16QAM, 64QAM,
256QAM
6MHz, 7MHz, 8MHz
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
Baseband Data Output
Subtitle
VBI
Closed Caption
Control & Monitoring
Connector Type
Remote Control
DVB Common Scrambling Algorithm(CSA)
BISS-1, BISS-E
Dual PCMCIA slots, compatible with
major CA CAMs in the market
ASI Output
Connector type
Standard
HDMI Output
Standard HDMI
Video Resolution
2×BNC Female, 75Ω
DVB-ASI, EN50083-9
Audio Embedded
Digital Video Processing
Video Standard
Video PID Bit Rate
Digital Audio Processing
1×HDMI 1.3 interface (no 1080p)
1080i×30, 1080i×29.97, 1080i×25,
720p×60, 720p×59.94,720p×50,
480p×60, 576p×50, 576i×25, 480i×29.97
one digital audio pass through
MPEG-2(MP@ ML for SD,MP@HL for HD)
MPEG 4/H.264 AVC Part 10 (MP@L3 for
SD, HP@L4.1 for HD)
< 80Mb/s
2×digital audio PIDs are decoded*
32, 44.1 and 48KHz
32, 64, 96, 128, 160, 192, 224,
256, 288, 320, 352, 384, 416
and 448 kb/s for MPEG-1 Layer I
32, 48, 56, 64, 80, 96, 112, 128, 160, 192,
224, 256, 320 and 384 kb/s for MPEG1Layer II
1 set of RCA, 75Ω
1×BNC 75Ω, 1×RCA 75Ω
NTSC, PAL, and SECAM
1080i×30, 1080i×29.97, 1080i×25,
720p×60, 720p×59.94,
720p×50, 480p×60, 576p×50,
576i×25, 480i×29.97
I.0 Vp-p±5%
<±I dB, at 5.5 MHz for PAL/SECAM,
4.2MHz for NTSC and 15MHz for HD
YPbPr
<±30 ns
<2%
<1%
<2%
<3%
<2°
>55 dB (luminance weighted)
1×XLR Male Socket, 2 pairs of RCA audio
600Ω (balanced)
Left, Right, Dual Mono, Stereo
2 pairs of stereo audio outputs (2 Audio
PIDs are decoded).
DVB/EBU
Teletext, WSS, VFD, VPS
EIA 608, EIA 708, EIA 608-to-708
1×RJ-45, 10/100 Base-T for equipment IP
Control
SNMP, HTTP Web, Proprietary HDMS
Network System Management Software
LCD display and 6-key keypad
1×RS-232 9-pin D-sub, for debug use only
FTP loader or USB
Local Control
Serial Port
Equipment Upgrade
Physical
Dimension
44mm×483mm×255mm
Weight
2.4Kg Net, 4.4Kg Gross
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
24W
Operating temperature
0~45
Storage temperature
-10~60℃
Operating Humidity
10~90%, non-condensed
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007,
EN 61000-3-2:2006, EN 61000-3-3:2008
FCC: Part 15 Class B
LVD: EN 60950-1:2006 + A11:2009
* For more information about digital audio, please contact our sales
representative.
2
Professional IRDs
Block Diagram
Order Information
Model
Interface
DCH-3100P-10X
DCH-3100P-20X
-10C
-10T
-10T2
-10S2
DVB-C
DVB-T
DVB-T2
DVB-S2
×2
×2
×2
×2
HDMI
×1
×1
×1
×1
×1
CVBS
×2
×2
×2
×2
YPbPr
×1
×1
×1
Audio L/R
×2
×2
Balanced audio XLR
×1
USB
×1
Tuner
-10A
-20C
-20T
-20T2
-20S2
DVB-C
DVB-T
DVB-T2
DVB-S2
×2
×2
×2
×2
×2
×2
×2
×2
×2
×1
×1
×1
×1
×1
×2
×2
×2
×2
×2
×2
×1
×1
×1
×1
×1
×1
×1
×2
×2
×2
×2
×2
×2
×2
×2
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
ASI IN
Common Interface
ASI-Output
×1
Back panel Interface
3
-20A
Professional IRDs
DCH-4000P
MPEG-2 SD IRD and Processor
DCH-4000P is a professional integrated
receiver decoder together with a builtin transport stream processor. Equipped
with a wide range of inputs of DVB-T/
T2,S/S2,C tuner, ASI and TS/IP, it can
be used in the satellite, cable, terrestrial
and IP networks. It provides a powerful
transport stream processing engine for
re-multiple×ing, descrambling, TS over
IP encapsulation. It has 2 DVB common
interface slots capable of working with
most of well known CAS in the market to
de-crypt multiple pay TV services. Its remultiple×ing capability enables creation
of customized SPTS and MPTS output
to IP and ASI ports. The DCH-4000P is
also a professional a broadcast quality
decoder for MPEG-2 Standard Definition
format, and provides a wide range of
industry standard digital analog video
and audio outputs, CVBS, Component,
AES/EBU, and SDI. This unique multi
function architecture makes the DCH4000P an ideal product for digital TV
broadcast network.
Main Feature
• Multiple inputs DVB-S2/S/C/T,TS/IP, ASI,
DS3(optional)
• 2× DVB-CI Slots, multiple TV programs
decryption
• SD MPEG-2 (MP@ML) digital Video
decoding
• Dynamic PMT detection and automatic
updating
• Digital audio embedded in SDI output
• Support VBI TELETE×T, EBU/ DVB Subtitle
• Multiple Analog and Digital Outputs, ASI,
• UDP/RTP & Unicast/Multicast SPTS and
CVBS, YPbPr, SD-SDI, AES/EBU , TS/IP
• Fle×ible re-multiple×ing between ASI, Tuner
and TS/IP Inputs
MPTS over IP I/O
• RSSI, received Eb/No & BER monitoring
software
A variety of industry
standard digital and analog
outputs
Dual DVB Common
Interface and Multi
Programs decryption
Multiple RF signal input
selectable among DVB-S/
S2/C/T/DS3
4
Tuner Input
Connector type
Input frequency range
Input level
Symbol rate
Roll off factor
Punctured rates
LNB Polarization selection voltage
LNB Band selection tone
Satellite selection command
DVB-C Tuner Input
Connector type
Input level
Symbol rate
Constellation
Bandwidth
Input return loss
DVB-T Tuner Input
Connector type
Descrambler
BISS mode
Common Interface
950~2150MHz
-25~-65dBm
5~45MBaud/s for QPSK
10~31MBaud/s for 8PSK
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9, 8/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
0/22KHz selectable
DiSEqC 1.0
ASI Output
Connector type
Standard
TS processing
Video Standard
SDI Video Resolution
Video Bit Rate
SD-SDI Output
Connector type
Serial interface
Single level
Analog Video Output
YPbPr Connector
CVBS Connector
Video Standard
Signal Level
Frequency Response
Chroma-Luma Delay
Short Time distortion
Differential Gain
Differential Phase
Analog Audio Output
Connector type
Output Impedance
Output mode
Number of Outputs
Ancillary Data Processing
Subtitle
VBI
Connector type
48~860MHz
45~ 75dBμV
1~7MBaud (ITU J.83 Anne× A)
16/32/64/128/256QAM
6MHz/7MHz/8MHz
7dB (typ.)
104~862MHz (VHF/UHF)
-20~-70dBm (Quasi Error Free, QEF)
DVB-T: QPSK/16-QAM/64-QAM
256QAM
6MHz/7MHz/8MHz
DVB-T: 2K/8K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
7dB (typ.)
Input level
Constellation
Bandwidth
FFT mode
Guard interval
FEC code rate
Input return loss
ASI Input
Connector type
Standard
Input bit rate
DS3 Input (Option)
Connector type
1×BNC, 75Ω
DVB-ASI, EN50083-9
≤ 100Mb/s
Remote control
Local control
Serial port
2×BNC Female, 75Ω, including loop
through
Compliant with ITU-T G.703
Compliant with ITU-T G.752 and ITU-T
G.804
44.736Mb/s
Standard
Frame structure
Bit rate
TS over IP
Connector Type
Useful bit rate
Protocol
Service and PID management
PSI/SI
2×BNC Female, 75Ω
DVB-ASI, EN50083-9
2 TS Re-multiple×ing from tuner, TS/IP
and ASI input (1 for mirror)
MPEG-2(MP@ ML )
PAL, NTSC. SECAM
< 80Mb/s
1×SDI output, BNC Female, 75Ω
SMPTE 259M, 270 Mb/s (10bit)
800mV p-p
1 set of RCA, 75Ω
1×BNC 75Ω, 1×RCA 75Ω
1.0 Vp-p±5%
<±1 dB at 5.5 MHz
<±30 ns
<2%
<1%
<2%
<4%
<2°
>55 dB (luminance weighted)
XLR Male Socket
600Ω (balanced)
1 pair of stereo audio output
DVB/EBU
Telete×t, WSS, VFD, VPS
1×RJ-45, 10/100M, for equipment IP
Control
1×RS-232 9-pin D-sub, for debug use
only
FTP loader
Equipment upgrade
Physical
Dimension
44mm×483mm×255mm
Weight
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
24W
0~45℃
Storage temperature
-10~50℃
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007,
EN 61000-3-2:2006, EN 61000-3-3:2008
1×RJ-45, 10/100M for TS/IP
70Mb/s for 10/100M
UDP / RTP, Multicast / Unicast,
IGMPv2, ARP
TS Processing
TS Input Management
DVB Common Scrambling Algorithm (CSA)
BISS-1, BISS-E
Dual PCMCIA slots, compatible with
Remu× and demu× among Tuner / DS3
(optional) /, ASI and TS/IP Inputs
Remu×, filtering and remapping
PSI/SI table regeneration, NIT and SDT
edition, LCN Edition and Re-generation
LVD: EN 60950-1:2006 + A11:2009
5
Professional IRDs
Specification
Professional IRDs
Block Diagram
Order Information
Model
Functionality
DCH-4000P-30X
Tuner Input
DCH-4000P-43X
DCH-4000P-44X
X = Tuner option: □–T: DVB-T □–C : DVB-C □–S : DVB-S □–S2 : DVB-S2 □–D : DS3
ASI Input
×1
×1
×1
DVB Common Interface
×2
×2
×2
Built-in Remultiplexer
●
●
●
ASI Output (mirrored)
×2
×2
×2
SDI Output (mirrored)
×2
×2
×2
Audio L/R (RCA)
●
●
●
YUV/RGB (RCA)
●
●
●
CVBS (BNC)
×1
×1
×1
CVBS (RCA)
×1
×1
×1
10/100M TS/IP Extension board
(Dual RJ-45,6 Channel)
●
10/100M TS/IP Extension board
(Single RJ-45, 32 Channel)
•
●
Standard configuration
DCH-4000P-44S2 models
6
DCH-5200P
Main Feature
• Variety of input options DVB-T2/S2/S/C/T/
• 2×DVB-CI Slots, multi-program decryption,
DTMB/ATSC/ISDB-T, DS3/E3, TS/IP and
BISS-1 and BISS-E decryption
ASI
• Supports DVB-S2 Input Stream Identifier
updating
(ISI, optional) and DVB-T SFN MIP pass
• Supports VBI TELETEXT, EBU/DVB
through
• Redundant backup among Tuner, ASI and
• UDP/RTP, Unicast/Multicast, and SPTS/
TS/IP with configurable priority
MPTS over IP (full duplex, optional)
• SD/HD MPEG-2 and MPEG-4 AVC/H.264
digital video decoding
• Two Audio PIDs decode or pass through
software
(compressed) in SDI output
• PCM audio embedded in SDI and HDMI
outputs
CVBS, YPbPr, HDMI, SD/HD-SDI, AES/
• PCM audio output on two AES/EBU audio
EBU Audio, TS/IP
output ports
• Built-in TS re-multiplexer receives ASI,
Dual DVB Common
Interface and Multi
Programs decryption
Professional IRDs
HD 4:2:0 IRD and Processor
The DCH-5200P IRD and Processor
provides operators an ideal solution for
receiving, remultiplexing, descrambling
and decoding operations. Equipped with a
variety of inputs that ensures compatibility
with all transmission media. The DCH5200P' s remultiplexing capabilities enable
creation of new transport streams that are
subsets of the original stream. Customized
services may be output as multiple SPTS
or MPTS over IP, as well as over ASI. By
the dual DVB common interfaces, DCH5200P could decrypt multiple services in
one transport stream or two. DCH-5200P
is also a professional IRD that features
a broadcast quality decoder for MPEG-2
and MPEG-4 AVC/H.264 in both Standard
Definition and High Definition formats, and
provides a variety of industry standard
digital and analog outputs, including CVBS
video, AES/EBU Audio, analog Audio, SDSDI and HD-SDI. The unit also performs
HD down-conversion and aspect ratio
adaptation of HD programs to generate
professional quality baseband analog video
and audio outputs for easy integration with
existing cable network infrastructure. This
all-in-one architecture makes the DCH5200P an ideal product for distribution and
contribution networks.
• On Site software update through IP
Tuner and TS/IP Inputs
A variety of industry
standard digital and
analog outputs
HDMI / YPbPr
DVB-S / S2
DVB-C
SDH
Network
HD-SDI
DVB-T / T2
DCH-5200P
DS3
Professional Digital TV
IRD and Processor
TS
ASI
TS
ASI
HDTV
HDTV Monitor
Video
Processing / Encoding
DVB ReMultiplexer
DVB QAM Modulator
HFC
TS / IP
Gigabit Ethernet or Dual
100M TS/IP interface for IP
based networks
TS / IP
TS / IP
IP Streaming
IP Network
Media Server
SNMP
TS / IP
Data Broadcast
HDMS
TM
Device Management System
7
Professional IRDs
Specification
Standard
Input Bit Rate
DS3 Input (Option)
Tuner Input
DVB-S/S2 Tuner Input (ISI Factory Optional)
Connector Type
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
Roll-off Factor
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
FEC Code Rate
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
0/22KHz selectable
DiSEqC 1.0
ISI ID
1~255 user configurable
DVB-C Tuner Input
Connector Type
51~862MHz
51~75dBμV
Input Level
Symbol Rate
16QAM, 32QAM, 64QAM, 128QAM,
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
Input Return Loss
7dB (typ.)
Connector Type
Input Frequency
Input Level
-20 ~ -70dBm
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
FFT Mode
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guarding Interval
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16,
1/32, 1/64, 1/128
FEC Code Rate
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Input Return Loss
7dB (typ.)
DTMB Tuner Input
Connector Type
46.5~866MHz
Input Level
-87~-29dBm
Symbol Rate
7.56MBaud
Bandwidth
6MHz/7MHz/8MHz
4QAM-NR,4QAM,16QAM,32QAM,
Constellation
64QAM
Guard Interval
PN420, PN595, PN945
Roll-off Factor
0.05
Interleaving Depth
240,720
FEC Code Rate
0.4, 0.6, 0.8
ATSC Tuner Input
Connector Type
54~864MHz
Input Level
-75~-7dBm(ATSC 8VSB)
Symbol Rate
10.762MBaud
Constellation
8VSB
Roll-off Factor
0.115
Bandwidth
6MHZ
ASI Input
Connector Type
1×BNC female, 75Ω
Connector Type
Standard
Frame Structure
Bit Rate
TS over IP
Connector Type
Effective Bit Rate
Protocol
FEC
TS Processing
TS Input Management
TS Output Management
Service and PID Management
PSI/SI
Descrambler
BISS Mode
Common Interface
ASI Output
Connector Type
Standard
Output Bit Rate
TS Processing
HDMI Output
Standard
Video Resolution and Frame
Rate
Audio Embedded
Video Standard
Video PID Bit Rate
HD/SD-SDI Output
Connector Type
SD Standard
HD Standard
Level
Connector Type
Number of Output
Audio Sampling Rate
Audio Bit Rate
Nominal Output Level
Output Format
DVB-ASI, EN50083-9
≤ 100Mb/s
2×BNC female, 75Ω, including loop
through
G.804
44.736Mb/s
1×RJ-45, 10/100 Base-T or 100/1000
Base-T for TS/IP
70Mb/s for 10/100/1000 Base-T
UDP / RTP, Multicast / Unicast,
IGMPv3, ARP
SMPTE 2022M (Pro-MPEG) FEC (for
GbE only)
Demux and Remux among Tuner /
DS3(optional) / E3 (optional), ASI and
TS/IP Inputs
Demux and Remux for 2 independent
ASI outputs
Remux, filtering and remapping
PSI/SI table regeneration, NIT and
SDT edition, LCN Edition and Regeneration
DVB Common Scrambling Algorithm
(CSA)
BISS-1, BISS-E
Double PCMCIA slots, compatible with
2 pairs of BNC female, 75Ω
DVB-ASI, EN50083-9
≤ 99Mb/s
2 Independent TS Re-multiplexed from
tuner, TS/IP and 2 ASI inputs
1×HDMI 1.3 interface (up to 1080i)
1080i×30, 1080i×29.97,1080×25,720p
×60,720p×59.94, 720p×50, 480p×60,
576p×50, 576i×25, 480i×29.97
1×stereo
MPEG-2(MP@ ML for SD,
MP@HL for HD)
MPEG 4/H.264 AVC Part 10 (MP@L3
for SD, HP@L4.1 for HD)
1080i×30, 1080i×29.97, 1080i×25,
720p×60, 720p×59.94, 720p×50,
576i×25, 480i×29.97
< 80Mb/s
1 pair of BNCs (mirrored) , female, 75Ω
SMPTE 292M, 1.485 Gbit/s (10bit)
800mV p-p
2×D-sub 9 male with XLR adaptor
cables
2×audios are decoded or passed
through
32, 44.1 and 48 KHz
32, 64, 96, 128, 160, 192, 224, 256,
288, 320, 352, 384, 416 and 448 Kb/
s for MPEG-1 Layer I, 32, 48, 56, 64,
80, 96, 112, 128, 160, 192, 224,256,
320 and 384 Kb/s for MPEG-1 Layer II
1V p-p (with standard test stream)
AES/EBU
8
110Ω (with XLR adaptor cables)
VBI
Closed Caption
Redundancy
Redundancy Port
Switching Condition
Switching Mode
2×BNC female 75Ω
576i×25, 480i×29.97
1.0 Vp-p±5% (with standard test stream)
<±1 dB, at 5.5 MHz for PAL/SECAM,
4.2MHz for NTSC
<±30 ns
<2%
<1%
<2%
<3%
<2°
>55dB (luminance weighted)
Frequency Response
Chroma-Luma Delay
Differential Gain
Differential Phase
Analog Audio Output
Connector Type
Output Impedance
Output Mode
Number of Output
Cross Talk Among Channels
THD
Frequency Response
Output Level
Subtitle
Connector Type
Remote Control
Local Control
Serial Port
Teletext, WSS
EIA 608, EIA 708, EIA 608-to-708
among Tuner, ASI input and TS/IP input
TS Sync Loss
Main, Spare
1 × R J - 4 5 , 1 0 / 1 0 0 B a s e - T, f o r
equipment IP Control
S N M P, H T T P ( W e b I n t e r f a c e ) ,
Proprietary HDMS (Headend Device
Management System)
1×RS-232 D-sub female, for debug
use only
Embedded FTP loader and Telnet
Equipment Upgrade
Physical
Dimension
44mm×483mm×255mm
Weight
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
24W (exclusive of LNB power)
0~45℃
-10~60℃
Storage temperature
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007, EN
61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
2×D-sub 9 male, with XLR adaptor
cable
600Ω (balanced)
PIDs or 4 channels are decoded).
>70dB
<0.3% @ 400Hz, 1KHz test tone
±0.5dB over 20Hz ~ 18KHz
0dBm in 600Ω (0dBu), adjustable
range ±I0dB
DVB, EBU
Block Diagram
9
Professional IRDs
Load Impedance
Analog Video Output
CVBS Connector
CVBS Standard
CVBS Resolution
Professional IRDs
Order Information
DCH-5200P
Model
Interface
Tuner Input
TS Input
TS Output
CI
Video/Audio Output
TS/IP
Upgrade
Management
ALARM/RELAY
ASI In x1
ASI Out 2x2
CI x2
SD SDI
HD SDI
HDMI x1
CVBS x1
Audio1
Audio 2
GbE RJ45 x1
USB x2
RJ45 x1
1*D9
-20X
-22X
-30X
-32X
● Input signal: DVB-S2, DVB-T2, ISDB, ATSC, DTMB, DS3
Standard configuration: X=S2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Back panel Interface (Full option)
10
HD 4:2:2 IRD and Processor
The DCH-5500P is the newest model
and flagship of PBI’s IRD product family.
It provides operators an ideal solution for
receiving, remultiplexing, descrambling and
decoding operations, supporting all MPEG
profile from Main to High 422P including
MPEG-2 8-bit and MPEG-4 4:2:2 10-bit
(optional). Equipped with a variety of inputs,
it ensures compatibility with all transmission
media. The DCH-5500P’s remultiplexing
capabilities enable creation of new transport
streams that are subsets of the original
stream. Customized services may be output
as multiple SPTS or MPTS over IP, as well
as over ASI. By the dual DVB common
interfaces, DCH-5500P could decrypt
multiple services in one transport stream or
two. DCH-5500P is also a professional IRD
that features a broadcast quality decoder
for 4:2:0 or 4:2:2 of MPEG-2 and MPEG4 AVC/H.264 in both Standard Definition
and High Definition formats, and provides
a variety of industry standard digital and
analog outputs, including CVBS video, AES/
EBU Audio, analog Audio, SD-SDI and HDSDI, frame Synchronization to the external
black and burst signal is also available. The
unit also performs HD down-conversion
and aspect ratio adaptation of HD programs
to generate professional quality baseband
analog video and audio outputs for easy
integration with existing cable network
infrastructure. This all-in-one architecture
makes the DCH-5200P an ideal product for
distribution and contribution networks.
Main Feature
• Variety of input options DVB-T2/S2/S/C/T/
DTMB/ATSC/ISDB-T, DS3/E3, TS/IP and ASI
• Supports DVB-S2 Input Stream Identifier
(ISI, optional) and DVB-T SFN MIP pass
through
• Frame synchronizes the IRD to the external
black and burst reference
• Redundant backup among Tuner, ASI and
TS/IP with configurable priority
• 4:2:0 and 4:2:2 (optional) of SD/HD MPEG2 and MPEG-4 AVC/H.264 digital video
decoding
updating
Subtitle, Closed Caption, and can be
embedded in SDI
• UDP/RTP, Unicast/Multicast, and double
• Up to 8 Audio PIDs decode or pass through
(compressed) in SDI output
• Up to 6 Audio PIDs decode or pass through
(compressed) in AES output
full duplex SPTS/MPTS over IP
software
• One alarm Relay with D-sub 9 male connector
CVBS, HDMI, SD/HD-SDI, AES/EBU Audio,
• On Site software update through IP and USB
TS/IP
• Built-in TS re-multiplexer receives from ASI,
Tuner and TS/IP Inputs
• 1.5” TFT LCD on front panel for monitoring
• Hot-swappable redundant power supply
1.5” LCD Monitor on front
panel
Optional 4:2:2 receiving
and decoding
Hot-swappable redundant
power supply
11
Professional IRDs
DCH-5500P
Professional IRDs
Specification
ASI Input-1
Connector Type
Standard
Input Bit Rate
DS3 Input-2 (Option)
Connector Type
Standard
Input Bit Rate
DS3/E3 Input (Option)
Tuner Input
Connector Type
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
Roll-off Factor
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
FEC Code Rate
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
LNB Polarity Selection
Voltage
0/22KHz selectable
DiSEqC 1.0
ISI ID
DVB-C Tuner Input
Connector Type
51~862MHz
Input Level
51~75dBμV
Symbol Rate
Constellation
256QAM
6MHz, 7MHz, 8MHz
Bandwidth
Input Return Loss
7dB (typ.)
Connector Type
Input Frequency
Input Level
-20~-70dBm
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
FFT Mode
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guarding Interval
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
FEC Code Rate
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Input Return Loss
7dB (typ.)
DTMB Tuner Input
Connector Type
46.5~866MHz
Input Level
-87~-29dBm
Symbol Rate
7.56MBaud
Bandwidth
6MHz/7MHz/8MHz
Constellation
64QAM
Guard Interval
PN420, PN595, PN945
Roll-off Factor
0.05
Interleaving Depth
240,720
FEC Code Rate
0.4, 0.6, 0.8
ATSC Tuner Input
Connector Type
54~864MHz
Input Level
Symbol Rate
10.762MBaud
Constellation
8VSB
Roll-off Factor
0.115
Bandwidth
6MHZ
Connector Type
Standard
Frame Structure
Bit Rate
TS over IP
Connector Type
Effective Bit Rate
Protocol
FEC
TS Processing
TS Input Management
PSI/SI
Descrambler
BISS Mode
Common Interface
ASI Output
Connector Type
Standard
Output Bit Rate
TS Processing
HDMI Output
Standard
Rate
Audio Embedded
Video Decode
Video Profile/Level
Audio Decode
Audio Format
1×BNC female, 75Ω
DVB-ASI, EN50083-9
≤ 100Mb/s
1×BNC female, 75Ω
DVB-ASI, EN50083-9
≤ 100Mb/s
through
G.804
DS3: 44.736Mb/s
E3: 34.368Mb/s
2×RJ-45, seperated 100/1000 Base-T
for TS/IP
800Mb/s for 100/1000 Base-T, duplex
for SPTS and MPTS
UDP / RTP, Multicast / Unicast, IGMPv3,
ARP
SMPTE 2022M (Pro-MPEG) FEC (for
GbE only)
Demux and Remux among Tuner /
DS3(optional) / E3 (optional), ASI and
TS/IP Inputs
Demux and Remux for 2 independent
ASI outputs
(CSA)
BISS-1, BISS-E
2 pairs of BNC female, 75Ω
DVB-ASI, EN50083-9
≤ 200Mb/s
tuner, TS/IP and 2 ASI inputs
1080i×30, 1080i×29.97,1080×25,720p
×60,720p×59.94, 720p×50, 480p×60,
576p×50, 576i×25, 480i×29.97
1×stereo
MPEG-2(MP@ ML for SD, MP@HL for
HD),
Main Profile(MP) 4:2:0 8-bit,
High Profile(HP) 4:2:2 8-bit
MPEG-4/H.264 AVC Part 10 (MP@L3
for SD, HP@L4.1 for HD),
High-422(Hi442P) 4:2:2 8/10-bit,
High-10(Hi10P) 4:2:0 10-bit,
High (HiP) 4:2:0 8-bit,
Main (MP) 4:2:0 8-bit,
Constrained Baseline (CBP) 4:2:0 8-bit,
High 10 Intra Profile (AVC-I 50) 4:2:0 10bit,
High 4:2:2 Intra Profile (AVC-I 100) 4:2:2
8/10-bit
MPEG-1 Layer 2
12
a. 2 stereo pairs (Stereo, Dual Mono,
Left, Right)
b. Digital Audio Pass-through
MPEG-2 AAC
MPEG-4 HE-AAC v1/v2
Connector Type
Video PID Bit Rate
HD/SD-SDI Output
Connector Type
SD Standard
HD Standard
Level
Genlock
Connector Type
Input Signal
Connector Type
Number of Output
Output Format
Load Impedance
Analog video Output
CVBS Connector
CVBS Standard
CVBS Resolution
Frequency Response
Chroma-Luma Delay
Differential Gain
Differential Phase
Analog Audio Output
Connector Type
2 x BNC female, 75Ω
1080p×59.94,1080p×50,
1080i×30,1080i×29.97,
1080i×25,720p×60,720p×59.94,
720p×50, 720p×29.97, 720p×25,
576i×25, 480i×29.97
≤ 60Mb/s
1 pair of BNCs (mirrored) , female, 75Ω
800mV p-p
1 x BNC female, 75Ω
Analog SD (black & burst)
2×D-sub 9 male with XLR adaptor
cables and 6 x BNC female 75Ω
8×audio PIDs are decoded or passed
through
1V p-p (with standard test stream)
SDI (Embedded Audio), AES
AES1~AES2: 2 x D-sub9, 110Ω (with
XLR adaptor cables)
AES3~AES8: 6 x BNC, 75Ω
1×BNC female 75Ω
576i×25, 480i×29.97
4.2MHz for NTSC
<±30 ns
<2%
<1%
<2%
<3%
<2°
2×D-sub 9 male, with XLR adaptor cable
Output Impedance
Output Mode
Number of Output
THD
Frequency Response
Output Level
Subtitle
VBI
Closed Caption
Redundancy
Redundancy Port
Switching Condition
Switching Mode
Alarm
Connector Type
Switching Condition
600Ω (balanced)
PIDs or 4 channels are decoded).
>70dB
0dBm in 600Ω (0dBu), adjustable range
±I0dB
DVB, EBU
Teletext, WSS
EIA 608, EIA 708, EIA 608-to-708
TS Sync Loss
Main, Spare
2×D-sub 9 male
User Defined
Connector Type
1×RJ-45, 10/100 Base-T, for equipment
IP Control
Remote Control
SNMP 2.0, HTTP (Web GUI),
Management System)
Local Control
Monitoring
Serial Port
LCD display and Front control 6-key
keypad
1.5'' TFT LCD monitor
1×RS-232 D-sub female, for debug use
only
Embedded FTP loader ,Telnet and USB
Equipment Upgrade
Physical
Dimension
1U 19" Full-rack size
Weight
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
0~45℃
Storage temperature
-10~60℃
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007, EN
61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
Back panel Interface (Full option)
13
Professional IRDs
Professional IRDs
Block Diagram
Order Information
Model
DCH-5500P-20X
DCH-5500P-30X
CVBS
1*BNC
●
●
AUDIO
2*R/L, Balance
●
●
HD-VIDEO
1*HDMI
●
●
HD-SDI
2*BNC
●
●
AES1~AES2
2*D9, with extended cable adaptor
●
●
AES3~AES8
6*BNC
ASI IN 1
6*BNC
ASI IN 2
1*BNC
ASI OUT 1
1*BNC
●
●
ASI OUT 2
1*BNC
●
●
Genlock
1*BNC
●
●
●
●
Interface
Standard Video/Audio
Digital Video/Audio
TS Input
TS Output
Genlock
●
●
●
●
4:2:0 decoding
4:2:2 decoding
TS/IP
Control/Upgrade
●
GbE
2*RJ45
●
●
Management
1*RJ45
●
●
Upgrade
2*USB
●
●
RS-232
1*D9
●
●
ALARM/RELAY
1*D9
●
●
2*
●
●
Power Supply
X = Tuner
C
DVB-C
T
DVB-T
S2
DVB-S2
T2
DVB-T2
D
DS3
M
STM-1
Factory default option: X=S2
14
DXP-3400P
Main Feature
• Quad Tuner Input, Supports variety of input
• On Site software update through IP or USB
options DVB-T2/S2/S/C/T/DTMB/ATSC/
ISDB-T, DS3/E3,
updating
• Supports DVB-S2 Input Stream Identifier (ISI,
optional) and DVB-T SFN MIP pass through
• SD/HD MPEG-2 and MPEG-4 AVC/H.264
digital video decoding
• Two Audio PIDs decode or pass through
software
(compressed) for each SDI output
• PCM audio embedded in SDI and HDMI
• Built-in 2xTS re-multiplexer, one receives
outputs
from Tuner1, Tuner2, CI1 and CI2 Inputs,
• Digital audio can be passed through by SDI
the other receives from Tuner3, Tuner4, CI3
• VBI TELETEXT, WSS and Closed Caption
and CI4 Inputs
embedded in SDI
Up to 4 decoders and
descramblers integrated
HD-SDI 1
HD-SDI 2
DXP-3400P
Professional Quad
HDTV IRD
HD-SDI 3
HD-SDI 4
ASI 1
power supply
ASI 2
ASI 3
ASI 4
• Redundant power supply
Encoder
Encoder
Encoder
Encoder
DVB ReMultiplexer
DVB ReMultiplexer
The DXP-3400P provides operators
an ideal solution for multi receiving,
descrambling, remultiplexing and
decoding operations. By the quad
DVB common interfaces, DXP-3400P
could decrypt multiple services in 4
transport stream. DXP-3400P is also
a professional IRD that features a
broadcast quality decoder for MPEG2 and MPEG-4 AVC/H.264 in both
Standard Definition and High Definition
formats, and provides a variety of
industry standard digital and analog
outputs, including 4 separated CVBS
video, analog Audio, SD-SDI and HDSDI. The unit also performs HD downconversion and aspect ratio adaptation
of HD programs to generate professional
quality baseband analog video and audio
outputs for easy integration with existing
cable network infrastructure. This all-inone architecture makes the DXP-3400P
an ideal product for distribution and
contribution networks.
Professional IRDs
4-Channel H.264 HD IRD
Scrambler
QAM Modulator
HFC
QAM Modulator
HFC
CAS
Scrambler
CAS
15
Professional IRDs
Specification
Tuner Input
Connector Type
4×F type female 75Ω for Input
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
DVB-S QPSK: 0.35
Roll-off Factor
DVB-S2 8PSK: 0.35, 0.25, 0.2
FEC Code Rate
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
0/22KHz selectable
DiSEqC 1.0
ISI ID
DVB-C Tuner Input
Connector Type
51~862MHz
Input Level
51~75dBμV
Symbol Rate
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
7dB (typ.)
Input Return Loss
Connector Type
Input Frequency
Input Level
-20~-70dBm
Constellation
256QAM
6MHz, 7MHz, 8MHz
Bandwidth
FFT Mode
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guarding Interval
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
FEC Code Rate
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Input Return Loss
7dB (typ.)
DTMB Tuner Input
Connector Type
46.5~866MHz
Input Level
-87~-29dBm
Symbol Rate
7.56MBaud
Bandwidth
6MHz/7MHz/8MHz
Constellation
4QAM-NR,4QAM,16QAM,32QAM,64QAM
Guard Interval
PN420, PN595, PN945
Roll-off Factor
0.05
Interleaving Depth
240,720
FEC Code Rate
0.4, 0.6, 0.8
ATSC Tuner Input
Connector Type
54~864MHz
Input Level
Symbol Rate
10.762MBaud
Constellation
8VSB
Roll-off Factor
0.115
Bandwidth
6MHz
DS3 Input (Option)
Connector Type
through
Standard
Frame Structure
G.804
Bit Rate
44.736Mb/s
TS Processing
Demux and Remux among Tuner and CI
TS Input Management
Inputs
PSI/SI
Descrambler
BISS Mode
Common Interface
ASI Output
Connector Type
Standard
Output Bit Rate
TS Processing
Video Standard
Video PID Bit Rate
HD/SD-SDI or ASI Output
Connector Type
SD Standard
HD Standard
Level
Embedded Audios
Embedded Ancillary Data
Analog Video Output
CVBS Connector
CVBS Standard
CVBS Resolution
Frequency Response
Chroma-Luma Delay
Differential Gain
Differential Phase
Analog Audio Output
Connector Type
Output Impedance
Output Mode
Number of Output
THD
Frequency Response
Output Level
Subtitle
VBI
Closed Caption
Demuxand Remux for 4 independent
ASI outputs
(CSA)
BISS-1, BISS-E
4 independent BNC female, 75Ω
DVB-ASI, EN50083-9
≤ 100Mb/s
tuner1, Tuner2, CI1 and CI2.
The other 2 Independent TS Remultiplexed from tuner3, Tuner4, CI3
and CI4.
HD)
1080i×30, 1080i×29.97, 1080i×25,
720p×60, 720p×59.94, 720p×50,
576i×25, 480i×29.97
≤ 60Mb/s
4 Pairs of SDI output, BNC, female, 75Ω
800mV p-p
MPEG-1 Layer 2
a. 2 stereo pairs (Stereo, Dual Mono,
Left, Right)
b. Digital Audio Pass-through
MPEG-2 AAC
MPEG-4 HE-AAC v1/v2
Teletext, WSS, CC
4×BNC female 75Ω
576i×25, 480i×29.97
4.2MHz for NTSC
<±30 ns
<2%
<1%
<2%
<3%
<2°
2×D-sub 9 male included 4 pairs of
stereo audio with XLR adaptor cable
600Ω (balanced)
PIDs or 8 channels are decoded)
>70dB
0dBm in 600Ω (0dBu), adjustable range
±10dB
DVB, EBU
Teletext, WSS
EIA 608, EIA 708, EIA 608-to-708
16
Connector Type
IP Control
SNMP, HTTP (Web Interface),
Management System)
only
Embedded FTP loader and Telnet
Remote Control
Local Control
Serial Port
Equipment Upgrade
Physical
Dimension
Weight
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
0~45℃
Storage temperature
-10~60℃
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007, EN
61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
Block Diagram
Back Panel Interface
17
Professional IRDs
8-Channel DTV Receiver
DXP-3800D is a high-density, modular
and CI decryption professional TS
processor equipped with 8 independent
tuners, which can be either of DVB-T/
T2, DVB-S2/S, DVB-C, DTMB, ISDB-T
and ATSC types. It supports a wide
range of application by combining 8
tuners processing capability with industry
standard outputs including ASI and TS/
IP. DXP-3800D has 8 DVB common
most of well-known CAS in the market
to de-crypt multiple pay TV services.
DXP-3800D provides operators an
ideal solution for multi receiving, remultiplexing, descrambling and TS over
IP operations, the compact 8 tuners
and the powerful 8 CI decryption design
make DXP-3800D one of the most
competitive product in the head-end
market.
Main Feature
• 8xTuners Input, Supports variety of input
Slot1 to CI Slot8 or BISS decryption
options DVB-T2/T/S2/S/C/DTMB/ATSC/
• 1xchannel full duplex TS over IP or
ISDB-T
128xchannels IP out without IP input
• Remote Control and Supervision by SNMP
optional) and DVB-T2 Multi PLP and SFN
v2, HTTP WEB and Proprietary HDMS
MIP pass through
software
CI Slot1 to CI Slot8 and TS/IP inputs
• RSSI, received signal strength, Eb/N0, C/N
and BER monitoring
• Redundency power supply
• 8xASI output the transport stream from CI
Built-in Remultiplexer and
TS/IP interface
TS/IP-1
DXP-3800D
8-Channel DTV
Receiver
...
TS/IP-128
ASI 1
power supply
ASI 2
...
ASI-8
Transcoder
Transcoder
Transcoder
Switch
TS/IP-1
Up to 8 channels in one rack
Scrambler
Switch
IPTV
QAM Modulator
HFC
CAS
Transcoder
DVB ReMultiplexer
Professional IRDs
DXP-3800D
Scrambler
CAS
18
Constellation
Roll-off Factor
Bandwidth
TS Processing
Tuner Input
Connector Type
950 ~ 2150MHz
Input Level
-25 ~ -65dBm
Symbol Rate
2 ~ 45MBaud
Roll-off Factor
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
FEC Code Rate
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
Voltage
0/22KHz selectable
DiSEqC 1.0
ISI ID
1 ~ 255 user configurable
DVB-C Tuner Input
Connector Type
51 ~ 862MHz
Input Level
51 ~ 75dBμV
Symbol Rate
1 ~ 7MBaud (ITU J.83 Annex A)
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
Input Return Loss
7dB (typ.)
Connector Type
Input Frequency
Input Level
-20 ~ -70dBm
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
FFT Mode
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guarding Interval
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
FEC Code Rate
TS Input Management
PSI/SI
Descrambler
BISS Mode
Common Interface
ASI Output
Connector Type
Standard
Output Bit Rate
TS Processing
ASI Input
Connector Type
Standard
Input Bit Rate
Connector Type
TS over IP
Connector Type
Effective Bit Rate
Protocol
Alarm
Connector Type
Switching Condition
Connector Type
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
Input Return Loss
DTMB Tuner Input
Connector Type
Input Level
Symbol Rate
Bandwidth
Constellation
Guard Interval
Roll-off Factor
Interleaving Depth
FEC Code Rate
ATSC Tuner Input
Connector Type
Input Level
Symbol Rate
Remote Control
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
Local Control
Serial Port
46.5~866MHz
-87~-29dBm
7.56MBaud
6MHz/7MHz/8MHz
64QAM
PN420, PN595, PN945
0.05
240,720
0.4, 0.6, 0.8
8VSB
0.115
6MHz
Demux and Remux among ASI, TS/IP
and CI Inputs
Demux and Remux for ASI output
Service and PID level for Remux,
filtering and remapping
(CSA)
BISS-1, BISS-E
8 x PCMCIA slots, compatible with major
CA CAMs in the market
9 independence BNC female, 75Ω,
DVB-ASI, EN50083-9
≤ 200Mb/s
8xASI out pass through the TS from CI 1
to CI8, 1xASI Out from Remux,
1×BNC female, 75Ω
DVB-ASI, EN50083-9
≤100Mb/s
1×BNC female, 75Ω
1×RJ-45, 100/1000 Base-T
400Mb/s for 128 channel IP out without
IP in
80Mb/s for full duplex 1 channel
ARP
1×D-sub 9 male
User Defined
IP Control
Management System)
only
Embedded FTP loader ,Telnet and http
Equipment Upgrade
Physical
Dimension
44mm x 255mm x 430mm
Weight
3.5kg
Power Supply
AC 90V ~ 250V, 50/60Hz
Power Consumption
0~45℃
Storage temperature
-10~60℃
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007, EN
61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
54~864MHz
10.762MBaud
19
Professional IRDs
Specification
Professional IRDs
Block Diagram
20
4-Channel TS Processor and Decoder
DXP-3440DP is a high-density, modular
and CI decryption professional TS
processor equipped with 4 independent
tuners, which can be either of DVB-T/
T2, DVB-S2/S, DVB-C, DTMB, ISDB-T
and ATSC types. It supports a wide
range of application by combining 4
tuners processing capability with industry
standard outputs including ASI and TS/
IP. DXP-3440DP has 4 DVB common
most of well-known CAS in the market
to de-crypt multiple pay TV services.
DXP-3440DP is also a professional
IRD that features a broadcast quality
decoder of MPEG-2 and MPEG-4 AVC/
H.264 in both Standard Definition and
High Definition formats, and provides
a variety of industry standard digital
and analog outputs, including 4xHDMI,
4XCVBS video, 4XAES/EBU Audio, and
4xBalance Audio. The unit also performs
HD down-conversion and aspect ratio
adaptation of HD programs to generate
professional quality baseband analog
video and audio outputs for easy
integration with existing cable network
infrastructure. DXP-3440DP provides
operators an ideal solution for multi
receiving, re-multiplexing, descrambling,
multi decoding and TS over IP
operations, all these features make DXP3440DP one of the most competitive
product in the head-end markett.
Main Feature
• 4 x Tuners Input, Supports variety of input
ISDB-T
4xHDMI, 4xCVBS, 4xAES/EBU Audio, and
4x XLR Audio
MIP pass through
updating
• Built-in TS re-multiplexer receives from IP,
• 4xASI output the transport stream from CI
• 1xchannel full duplex TS over IP, 5xchannels
MPTS IP out, or 128xchannels SPTS IP out
• Multiple Analog and Digital Outputs,
software
• One alarm Relay with D-sub 9 male
connector
and BER monitoring
• Redundency power supply
TS/IP interface
power supply
21
Professional IRDs
DXP-3440DP
Professional IRDs
Specification
Tuner Input
Connector Type
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
DVB-S QPSK: 0.35
Roll-off Factor
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
FEC Code Rate
5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
0/22KHz selectable
DiSEqC 1.0
ISI ID
DVB-C Tuner Input
Connector Type
51~862MHz
Input Level
51~75dBμV
Symbol Rate
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
7dB (typ.)
Input Return Loss
Connector Type
Input Frequency
Input Level
-20~-70dBm
Constellation
DVB-T2: QPSK, 16QAM, 64QAM,256QAM
Bandwidth
6MHz, 7MHz, 8MHz
DVB-T: 2K, 8K
FFT Mode
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
Guarding Interval
1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
FEC Code Rate
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
Input Return Loss
DTMB Tuner Input
Connector Type
46.5~866MHz
Input Level
-87~-29dBm
Symbol Rate
7.56MBaud
Bandwidth
6MHz/7MHz/8MHz
Constellation
64QAM
Guard Interval
PN420, PN595, PN945
Roll-off Factor
0.05
Interleaving Depth
240,720
FEC Code Rate
0.4, 0.6, 0.8
ATSC Tuner Input(compatible with ITU J.83 Annex B)
Connector Type
54~864MHz
Input Level
Symbol Rate
10.762MBaud
Constellation
8VSB
Roll-off Factor
0.115
Bandwidth
6MHz
TS Processing
Demux and Remux among IP input and
TS Input Management
CI1 to CI4 Inputs
ASI1 to ASI4 output directly pass
through the TS from CI1 to CI4,
Demux and Remux for ASI5, ASI6
output and IP output
Service and PID level for Remux1,
Remux2
PSI/SI
Descrambler
BISS Mode
Common Interface
ASI Output
Connector Type
Standard
Output Bit Rate
TS Processing
TS over IP
Connector Type
Effective Bit Rate
Protocol
A/V Decoding
Video Standard
Audio Standard
HDMI Output
Standard
Rate
Audio Embedded
Digital Audio Output
Connector Type
Number of Output
Audio Sampling Rate
Analog Audio Output
Connector Type
Output Impedance
Output Mode
Number of Output
THD
Frequency Response
Analog Video Output
Connector Type
CVBS Standard
Video PID Bit Rate
(CSA)
BISS-1, BISS-E
4×PCMCIA slots, compatible with major
Daughter Board: 4×BNC female,
independence output, 75Ω
Main Board: 2×BNC female,
independence output,75Ω
DVB-ASI, EN50083-9
≤ 200Mb/s
Daughter Board: ASI1 to ASI4 out pass
through the TS from CI 1 to CI4
Main Board: ASI5 out the TS from
Remux1, ASI6 out the TS from Remux2
1×RJ-45, 100/1000 Base-T
Support 3 different mode(need to reboot
unit if change the TS/IP mode):
1. Max.430Mb/s for 6xchannels
(4xchannels directly pass through the
TS from CI1 to CI4,
1×channel output the TS from Remux1,
and 1×channel output the TS from
Remux2) MPTS IP out without IP in,
2. Max.430Mb/s for 128xchannels SPTS
IP out the TS from one source, without
IP in,
3. Max.80Mb/s for full duplex 1xchannel
MPTS
UDP/RTP, Multicast/Unicast, IGMPv3,
ARP
HD)
MPEG-1 Layer-I/II, MPEG-2 Layer-II
LC-AAC, HE-AAC
1080i×30, 1080i×29.97,
1080i×25,720p×60,720p×59.94,
720p×50, 480p×60, 576p×50, 576i×25,
480i×29.97
4×stereo
4×DB15 female with AES/EBU adaptor
cable
4×audio are decoded or passed through
by AES
32K, 44.1K and 48 KHz
4×DB15 female with 1 pair XLR adaptor
cables
600Ω for balance
4 x stereo audio output for Balance(XLR
adaptor cables)
>70dB
4×DB15 female with CVBS adaptor
cable(BNC)
≤50Mb/s
22
Norminal Output Level
Frequency Response
Chroma-Luma Delay
Differential Gain
Differential Phase
Subtitle
VBI
Closed Caption
Alarm
Connector Type
Switching Condition
Connector Type
YPbPr
<±30 ns
<2%
<1%
<2%
<3%
<2°
DVB, EBU
Telete×t, WSS
EIA 608
1×D-sub 9 male
User Defined
IP Control
Remote Control
Local Control
Serial Port
Management System)
only
USB,WEB http and FTP
Equipment Upgrade
Physical
Dimension
Weight
7.9kg
Power Supply
AC 90V ~ 250V, 50/60Hz
Power Consumption
0~45℃
Storage temperature
-10~60℃
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007, EN
61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
Block Diagram
23
Professional IRDs
Professional IRDs
DXP-3440DM
4-Channel DVB Receiver and Transmodulator
DXP-3440DM integrates 4 DVB
Receiver and Transmodulator in one
1U 19” chassis. It provides operators
an ideal DTV headend setup solution
by combining multi-channel receiving,
descrambling, remultiplexing and DVB
QAM/COFDM modulation and TS over
IP operations together in one single
unit. Equipped with 4 independent tuner
front end with various factory options for
DVB-T/T2, DVB-S2/S, DVB-C, DTMB,
ISDB-T and ATSC types, and industrial
standard ASI and TS/IP inputs outputs,
DXP-3440DM ensures the compatibility
with all kind of transmission media.
The standard four PCMCIA common
interface on the rear panel are capable
of working with most of well-known CAS
in the market to de-crypt multiple pay
TV services. The compact space and
powerful functions make DXP-3440DM
one of the most competitive product in
the head-end market.
Main Feature
• 4×Tuner Input, Supports variety of input
ISDB-T
• 4×ASI output the transport stream from CI
• 1xchannel full duplex TS over IP or
MIP pass through
5xchannels IP out without IP input
• 4×DVB QAM/COFDM Modulation, 4 x RF
Channel Output (Adjacent channel)
software
and BER monitoring
TS/IP interface
DXP-3440DM
4-Channel DVB
Receiver
and Transmodulator
power supply
24
Tuner Input
Connector Type
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
Roll-off Factor
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
FEC Code Rate
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
0,13V,18V selectable, available for Tuner
Voltage
1&2
0/22KHz selectable, available for Tuner
1&2
DiSEqC 1.0
ISI ID
DVB-C Tuner Input
Connector Type
Standard
EN 300 429, ITU J.83 Annex A, B, C
51~862MHz
47~95dBμV 16QAM, SR=6.875Msps
Input Level
256QAM, SR=6.875Msps
Symbol Rate
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
Input Return Loss
8dB (typ.)
Connector Type
EN 300 744(DVB-T), EN 302 755
Standard
(DVB-T2)
Input Frequency
Input Level
-20 ~ -70dBm
Constellation
256QAM
Bandwidth
6MHz, 7MHz, 8MHz
FFT Mode
DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guarding Interval
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
FEC Code Rate
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Input Return Loss
7dB (typ.)
ASI Input
Connector Type
1×BNC female, 75Ω
Standard
DVB-ASI, EN50083-9
Input Bit Rate
≤216Mb/s
Built-in Remux
Number of Input
9xMPTS/SPTS
Number of Output
5xMPTS/SPTS
Demux and Remux among ASI, TS/IP
TS Input Management
and CI Inputs
Remux for ASI output, TS/IP output and
modulator
Service and PID level for Remux, filtering
and remapping
PSI/SI
Descrambling
Descrambler
(CSA)
4 x PCMCIA slots, compatible with major
Common Interface
BISS Mode
BISS-1, BISS-E
QAM Modulation
ETSI EN300 492, ITU J.83, Annex A/C:
Standard of System
16/32/64/128/256QAM
Symbol Rate
Constellation
I/Q Amplitude Error
I/Q Phase Error
Phase Jitter
MER
COFDM Modulation
Standard of System
Constellation
Bandwidth
FTT carrier number
Guard Interval
FEC rate
MER
RF Output
Interface
Carrier Central Frequency
Output Level
Spurious
Return Loss
ASI Output
Connector Type
Standard
Output Bit Rate
Data Mode
Package Length
Signal Level
2.5~6.99 Bauds
256QAM
≤ 0.1%
≤ 0.1%
< 0.5°RMS
36dB mi n., 42dB typ. (w i th tes ter
equalizer “off ” )
ETSI EN 300 744
QPSK/16QAM/64QAM
5/6/7/8MHz
2K, 8K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
36dB min., 40dB typ.
1x F-type Female, 1x F-type Female(20dB), 75Ω
48~996MHz adjustable, step by 1 KHz
92-109dBμV@1 RF output enabled,
88-105dBμV@ 2 RF output enabled
85-102dBμV@3 RF output enabled,
83-100dBμV@ 4RF output enabled
step by 1dB
≥55dBc typ.
≥12dB typ.
6x BNC female, 75Ω,
DVB-ASI, EN50083-9
≤ 200Mb/s
Byte
188/204 Bytes
800±80mV
ASI out 1-4: TS from Tuner 1 to 4 pass
ASI Output Source
through (Descrambled)
ASI 5-6: TS from Remux (mirrored)
TS/IP Gigabit Ethernet (Duplex mode)
1x RJ-45
Interface
Physical Layer Standard
IEEE 802.3, 10/100/1000 Base-T
1. Full-duplex: 1x multicast/unicast input
and output;
2. Multi-channel Output: 5x multicast/
Operation Mode
unicast MPTS/SPTS output;
3. IPTV Output: 128x multicast/unicast
output, unstuffed stream with video/audio
only
1. Full-duplex: Input: 80Mbps, Output:
80Mbps
Maximum Effective Bit Rate
2. Multi-channel Output: 700Mbps
3. IPTV Output: 430Mbps
Data Encapsulation
UDP, RTP
Other Protocols
Multicast/Unicast, IGMPv3,ARP
Alarm
Connector Type
1×D-sub 9 male
Switching Condition
User Defined
Connector Type
IP Control
Remote Control
SNMP, HTTP (Web Interface), Proprietary
HDMS (Headend Device Management
System)
Local Control
Serial Port
1×RS-232 D-sub female, for debug use only
Equipment Upgrade
Embedded FTP loader ,Telnet and http
Physical
Dimension
Net Weight
3.2kg
Power Supply
AC 90V ~ 250V, 50/60Hz
0~45℃
Storage temperature
-10~60℃
Operating Humidity
25
Professional IRDs
Specification
Professional IRDs
Order Information
DXP-3440DM-S2C
DXP-3440DM-S2T
DXP-3440DM-T2C
DXP-3440DM-T2T
DVB-S2/S
DVB-S2/S
DVB-T2/T/C
DVB-T2/T/C
ASI (BNC)
×1
×1
×1
×1
TS/IP (GbE, RJ45)
●
●
●
●
ASI x 4 (BNC)
●
●
●
●
TS/IP (GbE, RJ45)
●
●
●
●
QAM Modulation
●
Function
Tuner
Input
Output
●
COFDM Modulation
●
RF Monitor -20dB
●
●
●
●
●
Alarm (Contact Relay)
●
●
●
●
IP Control port (RJ45)
●
●
●
●
RS-232
●
●
●
●
Block Diagram
TUNER IN 1
TUNER IN 2
CI Slot 2/BISS
TUNER IN 3
CI Slot 3/BISS
TUNER IN 4
TS
CI Slot 1/BISS
TS
TS
TS
CI Slot 4/BISS
ASI Driver
ASI OUT 1
ASI Driver
ASI OUT 2
ASI Driver
ASI OUT 3
ASI Driver
ASI OUT 4
ASI IN
ASI OUT
TS Processing & Remux
TS/IP OUT
TS/IP IN
TS
POWER
SUPPLY
POWER
SUPPLY
AC 90~250V 50-60HZ
TS
TS
TS
DVB-C/T Modulation
CONTROL
RF OUT
RJ45 USB RS232
LCD & Keyboard
RF In
Backup
26
DCH-3000EC
DCH-3000EC is a real-time single
program 4:2:0 MPEG-2 encoder. It
provides both analog and digital audio/
video inputs like CVBS, S-Video and
SDI. By making compression of the base
band TV signal, the encoder outputs a
single program transport stream (SPTS)
to the ASI output port. Furthermore,
DCH-3000EC has an ASI input port
which can re-multiplex the encoded
SPTS with an external MPTS and
generate a new MPTS. As an option,
the MPTS of the encoder can also be
outputted through RJ-45 port over IP.
User can use SNMP for equipment
remote control and supervision. The
configuration of an encoder with built-in
re-multiplexer makes DCH-3000EC an
ideal product for the digital TV Headend
system where the high quality stable
video/audio compression is needed.
Single Channel MPEG-2 SD Encoder
Main Feature
• Compliant with 4:2:0 MPEG-2 MP@ML
20Mbps
video compression standard
• Configurable GOP
• Multiple video inputs S-Video, SDI, ASI and
CVBS
• Built-in two-way Re-multiplexer
• Support PAT, PMT and SDT generation and
• Multiple audio inputs Stereo, Balanced
NIT insertion
audio, and SDI embedded audio input
• SNMP based remote control system
• Support PAL, NTSC, and SECAM analog
TV standards
• LCD display and user friendly operation
menu
• User-configurable 4:3/16:9 aspect ratio
• Up to 6 MPTS or SPTS over multicast or
• Video compression bit rate from 1.5Mbps to
unicast IP streaming output
Multiple video inputs
S-Video, SDI, ASI and
CVBS
SNMP based remote control
system and optional 100M
TS/IP interface
Order Information
Model
DCH-3000EC-10
DCH-3000EC-30
DCH-3000EC-40
S-Video Input
●
●
●
CVBS Input (BNC)
●
●
●
●
●
●
●
●
●
Interface
SDI Input (BNC)
LCD display and user
friendly operation menu
Balanced audio XLR
●
ASI Input
Built-in Remultiplexer
●
●
●
ASI Output
●
●
●
10/100M TS/IP(RJ45 interface, 6
channels)
•
Standard function
27
●
Specification
Video Compression
Analog Input
Digital Input
Compression Standard
Video Resolution
Aspect Ratio
Video Compression bit rate
Audio Compression
Audio Channels
Audio Mode
Audio Sampling Rate
Audio Compression bit rate
Audio/Video Input Interface
Analog Audio
Analog CVBS
S-Video
SD-SDI
SDI embedded audio
ASI Input
Connector Type
Input bit rate
Packet Mode
Packet Length
TS Processing
TS Input Management
PSI/SI
TS over IP Output
Analog NTSC, PAL and SECAM
SD-SDI (SMPTE-259M)
MPEG-2 MP@ML
480i (720×480) @29.97Hz: SMPTE125M
576i (720×576) @25Hz: ITU-R BT.656-4
4:3/16:9 selectable
1.5~20Mb/s
1 pair of stereo
MPEG-1 Layer II
Stereo, Joint Stereo, Dual Mono, Mono
32, 44.1, 48 KHz
32, 64, 128, 192, 256, 384 Kb/s
Connector Type
Useful bit rate
Protocol
Source
ASI Output Interface
Connector Type
Output bit rate
Packet Length
Signal Level
Source
Connector Type
Remote Control
Balanced Audio XLR L / R
1×BNC female, 75Ω
1×S-Video female, 75Ω
1×BNC female, 75Ω
Group 1 to 4 selectable
1×BNC Female, 75Ω
≤ 100Mb/s
Byte or Burst
188/204 Bytes
Remux and demux between ASI input and
the SPTS encoded
PSI/SI table generation, NIT and SDT edition
1×RJ-45, 10/100 Base-T for TS/IP
70Mb/s min
ARP
Built-in Re-mux, ASI input, Encoder
2×BNC Female, 75Ω
≤ 99Mb/s
188 / 204 Bytes
800mVpp±10%
Any one of Built-in Re-mux, ASI input and
Encoder
IP Control
Software
Front Panel
Built-in FTP server + Telnet
Local Control
Software Upgrade
Physical
Dimension
44mm×483mm×240mm
Net weight
2.8Kg
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
Maximum 20W
Operating Temperature
0~45℃
Storage Temperature
-10~6℃
Operating Humidity
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007,
EN 61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
Block Diagram
28
DCH-5200EC
The DCH-5200EC is a high quality
single channel high definition MPEG4/
H.264 encoder. It has a wide range
of digital/ analog video and audio
inputs: CVBS, HD-SDI, YPbPr and
stereo audio. It can support up to high
definition TV up to 1080P, and the
compressed MPEG4/H.264 signal is
outputted from the ASI and IP port.
Compared to DCH-4000EC and
5000EC, it presents a unique function
of Time Base Correction to ensure the
audio and video synchronization, the
feature necessary for the professional
TV signal flow.
The DCH-5200EC’s re-multiplexing
function enables creation of a new
transport stream between the TS
of encoder and the TS from ASI or
IP. The encoder/trans-coder output
can be multiple SPTS or MPTS over
IP, a s w e l l a s o ve r ASI. In tra n scoding mode, the digital audios are
looped through and time stamping is
automatically implemented to ensure
the synchronization between video and
audio. This unique encoder/trans-coder
with built-in re-multiplexer architecture
makes the DCH-5200EC one of the
best solutions to meet the MPEG2 to
MPEG4/H.264 migration in today’s
digital broadcasting market.
Single Channel H.264 HD Encoder
Main Feature
• Multiple video resolution including 1080p,
1080i, 720p, 576i and 480i
• Built-in re-multiplexer for encoder loop
• Support VBR and CBR encoding mode
• Multiple inputs, HD-SDI, YPbPr, and CVBS
• Unique video and audio synchronization by
time base correction
• Support 2 pairs of analog stereo audio
encoding with optional extension board
• Remote Control and Supervision by SNMP,
• Support 10/100M TS/IP SPTS and MPTS
HTTP WEB
Multiple inputs HDMI, HDSDI, YPbPr, and CVBS
Order Information
10/100M TS/IP extension
board option
Remote Control and
Supervision by SNMP,
HTTP WEB and Proprietary
HDMS software
DCH-5200EC
Functionality
Input
-32
-40
ASI
●
●
●
●
CVBS
●
●
●
●
SDI
●
●
●
●
YPbPr
●
●
●
●
HDMI
●
●
●
●
Audio 1
●
●
●
●
●
Audio 2
Output
DCH-5100P-43X
-42
-30
ASI x2
●
●
GigE Full Duplex
●
●
●
●
●
Management
●
●
●
●
RS-232
●
●
●
●
29
Specification
Video Compression
Video Resolution
1080p（1920x1080）@ 59.94 Hz，50 Hz
SMPTE296M: 6~30Mb/s
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 6~24Mb/s
1080i（1440x1080@25Hz, 29.97Hz
SMPTE274M: 5~24Mb/s
720p（1280x720）@50Hz, 59.94Hz
SMPTE296M: 4~24Mb/s
480i（720x480）@29.97Hz:
SMPTE656M: 2~10Mb/s
576i（720x576）@25Hz:
SMPTE656M: 2~10Mb/s
Aspect Ratio
Video Encoding Bit Rate
Audio Compression
Audio Input
Audio Channels
Audio Sampling Rate
Audio compression Bit Rate
Analog Audio
H.264, High Profile Level 4.0
4:3/16:9 selectable
2Mb/s-30Mb/s
Analog CVBS
YPbPr
HDMI
ASI Input
Connector Type
Input bit rate
Packet Mode
Packet Length
TS Processing
1×BNC Female, 75Ω
3×RCA Female, 75Ω
1×HDMI 1.3
Embedded Audio, Analog audio
Maximum 2 pair of stereo
48KHz
32 ~ 384Kb/s
1×D-sub 9 Female male with XLR adaptor
cables
1×BNC Female, 75Ω
≤ 100Mb/s
Byte
188/204 Bytes
Remux and demux for mirrored ASI outputs
TS Input Management
Remux and demux between ASI input and
the SPTS encoded
PSI/SI
TS over IP
Connector Type
Useful bit rate
Protocol
Source
ASI Output
Connector Type
Output bit rate
Packet Length
Signal Level
Connector Type
PSI/SI table regeneration, NIT and SDT edition
1×RJ-45, 10/100M for TS/IP
70Mb/s for 10/100M
UDP / RTP, Multicast / Unicast, IGMPv2, ARP
Built-in Re-mux, ASI input, Encoder
2×BNC Female, 75Ω
≤ 99Mb/s
188 / 204 Bytes
800mVpp±10%
1×RJ-45, 10/100M, for equipment IP
Control
SNMP, HTTP Web
Built-in FTP loader and Telnet
Remote Control
Local Control
Software Upgrade
Physical
Dimension
44mm×483mm×340mm
Net weight
3.2Kg
Power supply
AC90~250V, 50Hz/60Hz
Power Consumption
Maximum 20W
0 ~ 45℃
Storage Temperature
-10 ~ 60℃
Humidity
10 ~ 90%, non-condensed
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007,
EN 61000-3-2:2006, EN 61000-3-3:2008
LVD: EN 60950-1:2006 + A11:2009
Block Diagram
30
DXP-3800EC
8-Channel MPEG-2 SD Encoder
DXP-3800EC is an integrated 8-way
high density MPEG-2 Encoder. Eight
ways of Standard Definition (SD) base
band real time A/V programs could be
encoded simultaneously. These streams
encoded could be re-multiplexed with the
stream from its ASI input port. The final
re-multiplexed Transport Stream (TS) is
available at its Gigabit TSoverIP port and
ASI output port.
Main Feature
• Compile with MPEG-1(ISO/IEC11172),
MPEG-2 MP@ML(ISO/IEC13818)
• Video resolutions: 576i (PAL, SECAM) &
480i (NTSC)
• 8-way encoder with re-multiplexed integrated
• SNMP & HTTP WEB
• 1 ASI input (for daisy chain) & 1 ASI output
• Redundant Power Supplies
• Full duplex Gigabit TS over IP
• 19” x 1 U EIA standard chassis
TS/IP interface
Order Information
Functionality
Audio/Video Input
power supply
TS Input
TS Output
Management
Upgrade
Alarm/Relay
Debug
Video CVBS
Audio R/L
ASI
TS/IP Input(Full dumplex)
ASI
TS/IP
RJ-45
USB
Alarm
RS-232
DXP-3800EC
DXP-3400EC
8
8
4
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
31
Specification
Video input & Encode
Number of input ports
Encoding Standard
Chrominance Format
Compression Bit Rate
Effective Data Rate
Data Transfer type
Packet Length
Signal Level
Gigabit TS_over_IP
CVBS x 8
MPEG-2 MP@ML
4:2:0
1.5Mbps~10Mbps
480i(720×480)@29.97Hz:
SMPTE656M: 3~6Mb/s
576i(720×576)@25Hz:
SMPTE656M: 3~6Mb/s
Half D1,SIF,QSIF
Main Video Resolutions &
Recommended
Compression Bit Rates
Other Video Resolutions
Audio Input & Encode
Standard
Data Protocol
Control Protocol
Interfaces on Rear Panel
ASI In
CVBS In
AUDIO In
ASI Out
Interfaces on Front Panel
Control
8 pairs of Stereo Audios
MPEG1 Layer I
MPEG1 Layer II
32KHz, 44.1KHz, 48KHz
MPEG1 Layer I: 64~256Kb/s
MPEG1 Layer II: 32~384Kb/s
Sampling Rate
DVB-ASI Input
Interface
Maximum Input Bit rate
Data Transfer type
Packet Length
Signal Level
DVB-ASI Output
Interface
1.5 Mb/s~70 Mb/s
Byte
188 or 204 Bytes
800±80mV
TS/IP
BNC Female, 75Ω
100 Mb/s
Byte
188 or 204 Bytes
200~880mVp-p
Display
Others
Power Supply
Storage Temperature
Operating Humidity
BNC Female, 75Ω
IEEE 802.3, 10/100/1000 Base-T, Full
Duplex
80Mb/s
UDP or RTP, SPTS or MPTS
ICMP, ARP, IGMPv2
1×BNC Female, 75Ω
8×BNC Female, 75Ω
8×BNC Female, 75Ω
2×BNC Female, 75Ω(1 Backup)
1 RJ-45, 10/100 Base-T
1×IP (GbE), RJ-45, 10/100/1000 Base-T,
Full Duplex
2 x 20 LCD Display
AC90~260V 50/60Hz
0~45℃
-10~60℃
Block Diagram
DXP-3800EC Functional Block Diagram
A/V In -1
A/V Receiver
Converter-1
Encoder -1
ASI Out*1
ASI
Transmitter
.
.
.
A/V In -8
A/V Receiver
Converter-8
ASI In*1
Encoder -8
TS
Processor
(MUX)
Keypad
LCD/LED
Control
ASI Out*2
MCU
RS-232
Alarm
AC-1
90-250V
Power
Supply-1
AC
90-250V
Power
Supply-2
TS Over IP
TS/IP
Multi Output Mode:
8SPTS Out + 2MPTS Out
Duplex Mode:
1MPTS In + 1MPTS Out
32
DXP-4800EC/4801EC
DXP-4800EC/4801EC is a high density
real-time H.264 HD/SD and MPEG-2 SD
Encoder that can support up to eight High
Definition (HD) A/V signals compressing
and encoding simultaneously. These
A/V signals can be fed into DXP4800EC/4801EC via 8 CVBS or 8x SDI
input ports depending on different factory
option. The encoded streams can be
then remultiplexed and output over its
GbE IP and ASI ports. DXP-4800EC
adopts the chipset solution that embeds
Time Base Correction (TBC) to ensure
the audio and video synchronization, the
features necessary for the professional
TV signal flow. DXP-4800EC/4801EC
allows user to configure, monitoring and
manage over the informative front panel
and keypad, or Web interface, or SNMP
based management software from 3rd
party. Brilliant picture quality, high density
design, high stability system architecture,
and the hot-swappable power supply
make the DXP-4800EC/4801EC the best
choice for real-time H.264 HD/SD or
MPEG-2 SD encoding.
8-Way H.264 HD/SD and MPEG-2 SD Encoder
Main Feature
•Compile with H.264/AVC HP@
•8-way encoder with re-multiplexed
L4.0&MPEG-2 MP@ML
integrated
•MPEG1 Layer II, MPEG-2/4 AAC-LC/HE-
•Low bit rate encoding. Minimum video
AAC audio compression (AAC is for DXP-
encoding bitrate can reach 500Kbps.
4800EC-X only)
•Support resolution down scale
•Support video resolution 1080i, 720p, 576i
•Support VBR and CBR
and 480i
•Full duplex Gigabit TS over IP I/O
•8 x HD-SDI or HDMI input type factory
•Redundant Power Supplies
option(CVBS support SD only)
•19”×1 U EIA standard chassis
•SNMP & HTTP WEB
TS/IP interface
Order Information
DXP-4800EC
-S
-H
Functionality
Audio/Video
Input
power supply
HD/SD SDI
8
DXP-4801EC
-S
-H
8
HDMI
4
8
ASI
TS Input
TS/IP Input
(Full dumplex)
ASI
TS Output
TS/IP
Management
RJ-45
Upgrade
USB
Alarm/Relay
Alarm
Debug
RS-232
Digital Audio HE-AAC，AAC-LC
DXP-4400EC
-S
-H
4
8
4
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Y
N
Y
N
33
DXP-4401EC
-S
-H
Specification
Video input & compression
Pixel Format
Video Resolution (with
recommended compress
bitrate)
Resolution down-scale
Aspect Ratio
Audio Input & compression
Input
Audio Compression
Sampling Rate
DVB-ASI Input
Interface
Data Transfer type
Packet Length
HD-SDI×8 or HDMI x 8
H.264/AVC HP@L4.0, MPEG-2 MP@ML
4:2:0, 8-bit, YCbCr
500Kbs~20Mbps for each channel
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 1~13Mb/s
1080i（1440x1080@25Hz, 29.97Hz
SMPTE274M: 5~24Mb/s
720p（1280x720）@50Hz, 59.94Hz
SMPTE296M: 1~13Mb/s
480i（720x480）@29.97Hz:
SMPTE656M: 600K~10Mb/s
576i（720x576）@25Hz:
Output resolution can be adjusted freely
by user
4:3/16:9 Selectable
HDMI or SDI Embedded audio
(factory option)
MPEG1 Layer II, MPEG-2/4 AAC-LC,
HE-AAC(V1,V2). Note: AAC is for DXP4800EC only
48KHz
MPEG1 Layer II :32~192Kbps(Mono),
64~384Kbps(Stereo)
MPEG2/4 AAC-LC :24~256Kbps(Mono),
48~512Kbps(Stereo)
MPEG2/HE-AAC(V1/V2):
16~128Kbps(Mono), 32~256Kbps(Stereo)
BNC Female, 75Ω
100 Mb/s
Byte
188 or 204 Bytes
Block Diagram
Signal Level
200~880mVp-p
DVB-ASI Output
Interface
BNC Female, 75Ω
Effective Data Rate
120 Mb/s
Data Transfer type
Byte
Packet Length
188 or 204 Bytes
Signal Level
800±80mV
Gigabit TS_over_IP (Full Duplex Mode)
IEEE 802.3, 10/100/1000 Base-T, Full
Standard
Duplex
80Mb/s
Data Protocol
Control Protocol
ICMP, ARP, IGMPv2
Gigabit TS_over_IP Output (Multi-Channel IPTV Mode)
Standard
IEEE 802.3, 10/100/1000 Base-T,
200Mb/s
Data Protocol
Control Protocol
ICMP, ARP, IGMPv2
Interfaces on Rear Panel
ASI In
1×BNC Female, 75Ω
8×BNC Female, 75Ω (only available on
HD-SDI In
DXP-4800EC/4801EC-S)
8×HDMI Male, 75Ω (DXPHDMI In
4800EC/4801EC-H)
ASI Out
Interfaces on Front Panel
Control
1×RJ-45, 10/100 Base-T
1×IP(GbE), RJ-45, 10/100/1000 Base-T,
TS/IP
Full Duplex
Display
2×20 LCD Display
Others
Power Supply
AC90~260V 50/60Hz
0~45℃
Storage Temperature
-10~60℃
Operation Humidity
10~90%, (Non-condensed)
DXP-4800EC/4801EC Functional Block Diagram
A/V In -1
A/V Receiver
Converter-1
Encoder -1
ASI Out*1
ASI
Transmitter
.
.
.
A/V In -8
A/V Receiver
Converter-8
ASI In*1
Encoder -8
TS
Processor
(MUX)
Keypad
LCD/LED
Control
ASI Out*2
MCU
RS-232
Alarm
AC-1
90-250V
Power
Supply-1
AC
90-250V
Power
Supply-2
TS Over IP
TS/IP
Multi Output Mode:
8SPTS Out + 2MPTS Out
Duplex Mode:
1MPTS In + 1MPTS Out
DXP-4800/4801EC-H
34
DXP-5800EC/5801EC
DXP-5800/5801EC is a series of high
density real-time H.264 HD/SD Encoders
that can support up to eight High
Definition (HD) A/V signals compressing
and encoding simultaneously. These A/
V signals can be fed into the unit via
8x SDI input ports as different factory
options. The encoded streams can be
then remultiplexed and output over its
GbE IP and ASI ports. All models support
Time Base Correction (TBC) to ensure
the audio and video synchronization, the
features necessary for the professional
TV signal flow. The series provide two
TS/IP operation modes. The first is “Full
Duplex”, which allows one MPTS or
SPTS inputted over 1 multicast/unicast
to make up a new MPTS with local
encoders, then sends out the new one
over 1 multicast/unicast. In the second
mode “Multiple output” which delivers
up to 9 streams over IP. There are 8 unstuffed SPTS (lower bit rate but less PCR
accurate than normal SPTS, from local
encoders) and 1 MPTS (from internal
reMultiplexer) over the IP with different
Unicast or Multicast IP addresses.
DXP-5800/5801EC allows user to
configure, monitoring and manage over
the informative front panel and keypad,
or Web interface, or SNMP based
management software from 3rd party.
This Encoder family presents brilliant
picture quality, high density design, high
stability system architecture, and the hotswappable power supply.
8-Channel H.264 HD/SD Encoder
Main Feature
•Compile with H.264/AVC HP@L4.0
•Full duplex Gigabit TS over IP I/O (under
•MPEG1 Layer II, MPEG2 AAC-LC, MPEG4
Full duplex operation mode)
AAC-LC audio compression (see ordering
•Up to 9 multicast/unicast output (under
information)
Multiple output operation mode)
•8-way real time encoder with re-multiplexed
•VBR and CBR encoding mode
integrated
•Free resolution downscale at same frame
•Built-in re-Mux accepts up to 10 SPTS/
rate
MPTS (8 from local encoders, 2 from
•SNMP & HTTP WEB
external input over IP and ASI)
•Redundant Power Supplies
•1 ASI input (for daisy chain) & Redundant
•19” x 1 U EIA standard chassis
ASI output
TS/IP interface
Order Information
Up to 8 SDI or HDMI input
Audio/Video
Input
power supply
DXP-5800EC
-S
-H
Functionality
HD/SD SDI
8
DXP-5801EC
-S
-H
8
HDMI
4
8
ASI
TS Input
TS/IP Input
(Full dumplex)
ASI
TS Output
TS/IP
Management
RJ-45
Upgrade
USB
Alarm/Relay
Alarm
Debug
RS-232
Digital Audio HE-AAC，AAC-LC
DXP-5400EC
-S
-H
4
8
4
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Y
N
Y
N
35
DXP-5401EC
-S
-H
Specification
Video input & compression
Video Sampling Format
Video Resolution &
Recommended Bit Rate
Other Video Resolution
Aspect Ratio
Audio Input & compression
Input
Audio Compression
Sampling Rate
DVB-ASI Input
Interface
Data Transfer type
Packet Length
HDMI x 8 or HD-SDI x 8
H.264/AVC HP@L4.0
4:2:0, 8-bit, YCbCr
2~30Mbps for each channel
1080p (1920×1080) @ 59.94 Hz,50Hz:
SMPTE296M: 6~30Mb/s
1080 (1920×1080) @25Hz,29.97Hz,
30Hz:SMPTE274M: 6~24Mb/s
1080i (1440×1080) @25Hz,29.97Hz,
720p (1280×720) @50Hz,59.94Hz,
480i (720×480) @29.97Hz:SMPTE656M:
2~10Mb/s
576i (720×576) @25Hz: SMPTE656M:
2~10Mb/s
Free resolution downscale at same frame
rate
4:3/16:9 Selectable
SDI Embedded audio
MPEG1 Layer II, MPEG2 AAC-LC,
MPEG4 AAC-LC (option)
48KHz
32~192Kbps(Mono), 64~384Kbps (Stereo),
128~512Kbps(AAC LC)
BNC Female, 75Ω
100 Mb/s
Byte
188 or 204 Bytes
Signal Level
200 ~ 880mVp-p
DVB-ASI Output
Interface
BNC Female, 75Ω
Max. Effective Data Rate
120 Mb/s
Data Transfer type
Byte
Packet Length
188 or 204 Bytes
Signal Level
800±80mV
Gigabit TS_over_IP (Full Duplex Mode)
IEEE 802.3, 10/100/1000 Base-T, Full
Standard
Duplex
Max. Effective Bit Rate
80Mb/s
Data Protocol
Control Protocol
ICMP, ARP, IGMPv2
Gigabit TS_over_IP Output (Multi-Channel IPTV Mode)
Standard
IEEE 802.3, 10/100/1000 Base-T,
Max. Effective Bit Rate
200Mb/s
Data Protocol
Control Protocol
ICMP, ARP, IGMPv2
Rear Panel
1×BNC Female, 75Ω
ASI In
8×BNC Female, 75Ω
HD-SDI In
(DXP-5800/5801EC-S)
ASI Out
Front Panel
Control
1×RJ-45, 10/100 Base-T
TS/IP
1× IP (GbE), RJ-45, 10/100/1000 Base-T
Display
2×20 LCD Display
Others
Power Supply
AC90~260V 50/60Hz
0~45℃
Storage Temperature
-10~60℃
Operation Humidity
10~90%, (Non-condensed)
Block Diagram
DXP-5800EC/5801EC-S
36
DXP-3410EM/4410EM/5410EM series
are accommodated in 1U x 19” standard
chassis with 2 redundant power
supply modules.It is the most suitable
deployment choice for any system in
DVB, IPTV and Surveillance industries.
DXP-3410EM/4410EM/5410EM is
integrated with 4-channel real-time
encoders and 1 channel modulator.
Four sets of A/V inputs are encoded and
generated to 4 Transport Streams (TS)
independently. The TS streams from
the internal encoders, ASI input and TS/
IP (TS_over_IP) input (full duplex mode
only) could be re-multiplexed into one
MPTS ( Multiple Program TS), then
modulated to one DVB RF carrier, QAM
or COFDM. This MPTS is also available
at the ASI output & TS/IP output
simultaneously. With a built-in RF backup relay switch, any external RF signal
could be fed to the main output for backup in cases of internal malfunction (main
RF level < 75dBuV) or power supply lost.
DXP-3410EM
DXP-4410EM/4411EM
DXP-5410EM/5411EM
4-Channel Encoder and Modulator
Main Feature
• Comply with H.264/AVC HP@L4.1(DXP5410EM/5411EM)
• Comply with H.264/AVC HP@L4.0(DXP4410EM/4411EM)
• Comply with MPEG-2 MP@ML（ISO/
IEC13818-2）(DXP/3410EM/DXP4410EM/4411EM)
• MPEG-2/4 AAC-LC/HE-AAC Option for
DXP-4410EM/5410EM
• 4 independent real-time encoders
• Integrated 6-input TS reMUX, (4 for
encoders, 1 for ASI in, 1 for TS/IP in)
• ASI & TS/IP outputs
• Up to 5 TS/IP output streams (200Mb/s
Max.)( 4 for encoders, 1 for ASI mirrored or
reMUX)
• Constant Bit Rate (CBR) & Variable Bit
Rate (VBR)
• DVB-C/QAM (ITU J.83 Annex A/C) or
DVB-T/COFDM RF out, selectable
• 50MHz ~ 996MHz RF carrier output
frequency adjustable
• 120dBμV Total Output Level
• RF Back-up loop through input (RF relay)
• SNMP & HTTP remote control & monitor
• Software could be upgraded with Web
interface
• EIA 1U x 19” standard chassis with 2
redundant power supply modules
Order Information
Up to 4 encoders integrated
DXP3410EM
Functionality
Video
Standard
Built-in RF back-up relay
switch
Audio
Standard
Input
power supply
Output
MPEG-2 SD
H.264/AVC
MPEG1 Layer II
AAC-LC
AAC-LC，HE-AAC
CVBS
HDMI
HD-SDI
ASI
TS/IP (GbE)
(Full dumplex)
RF In (back up)
ASI x2
TS/IP (GbE)
RF Out –QAM&COFDM
RF Monitor -20dB
Alarm
Management（RJ-45 +USB）
RS-232
DXP4410EM
-H
-S
DXP4411EM
-H
-S
DXP5410EM
-H
-S
-H
-S
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●　●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
37
DXP5411EM
Specification
Video Input & Compression(DXP-3410EM)
Video Input
CVBSx 4
MPEG-2 MP@ML
Chrominance Space
4:2:0
1.5Mbps~10Mbps
480i(720×480)@29.97Hz:SMPTE656M:
Video Resolutions &
2~10Mb/s
Recommended Video
576i(720×576)@25Hz: SMPTE656M:
Encoding Bit Rates
2~10Mb/s
Other video resolutions
Full D1,Half D1,SIF,QSIF
Aspect Ratio
4:3 / 16:9 selectable
Audio Input & Compression(DXP-3410EM)
Audio Input
4 pairs stereo audio
MPEG1 Layer I, MPEG1 Layer II
Sampling Rate
32KHz, 44.1KHz, 48KHz
Audio Compression Bit Rate
MPEG1 Layer I: 64~256Kb/s
Video input & compression(DXP-4410EM/4411EM )
H.264/AVC HP@L4.0, MPEG-2 MP@ML
Pixel Format
4:2:0, 8-bit, YCbCr
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 1~13Mb/s
1080i（1440x1080@25Hz, 29.97Hz
SMPTE274M: 5~24Mb/s
Video Resolution (with
720p（1280x720）@50Hz, 59.94Hz
recommended compress
SMPTE296M: 1~13Mb/s
bitrate)
480i（720x480）@29.97Hz:
576i（720x576）@25Hz:
Output resolution can be adjusted freely
Resolution down-scale
by user
Aspect Ratio
4:3/16:9 Selectable
Audio Input & compression(DXP-4410EM/4411EM )
Input
MPEG1 Layer II, MPEG-2/4 AAC-LC,
HE-AAC(V1,V2). Note: AAC is for DXPAudio Compression
4400EM only
Sampling Rate
48KHz
MPEG1 Layer II :32~192Kbps(Mono),
64~384Kbps(Stereo)
MPEG2/4 AAC-LC :24~256Kbps(Mono),
48~512Kbps(Stereo)
MPEG2/HE-AAC(V1/V2):
16~128Kbps(Mono), 32~256Kbps(Stereo)
Video Input & Encoding(DXP-5410EM/5411EM )
Input type
Encoding Standard
H.264/AVC High Profile,up to Level 4.1
Y/Cb/Cr Sampling Format
4:2:0
1080p（1920x1080）@ 59.94 Hz，50 Hz
SMPTE296M: 6~30Mb/s
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 6~24Mb/s
1080i（1440x1080@25Hz, 29.97Hz
Video Resolution &
SMPTE274M: 5~24Mb/s
Recommended Bit Rate
720p（1280x720）@50Hz, 59.94Hz
(see ordering info.)
SMPTE296M: 4~24Mb/s
480i（720x480）@29.97Hz:
SMPTE656M: 2~10Mb/s
576i（720x576）@25Hz:
SMPTE656M: 2~10Mb/s
Full D1,Half D1,SIF,QSIF
Other Video Resolution &
Vertical & Horizontal Pixel down scalable
Down Scaler
respectively (with frame rate not changed)
Aspect Ratio
4:3 or 16:9 adjustable
Audio Input & Encoding(DXP-5410EM/5411EM )
Audio Input type
MPEG1 Layer II, Mono: 32~192Kb/s,
Standard & Recommended
Stereo: 64~384Kb/s
Bit Rate
AAC-LC 2ch, Stereo: 128~512Kb/s
(DXP-5410EM-X only)
32~192Kbps( MONO), 64~384Kbps(
STEREO)
48KHz
Sampling Rate
DVB-ASI Input
Interface Type
BNC Female, 75Ω
200 Mb/s
Data type
Byte
Packet Length
188/204 Bytes
Valid Receiving Amplitude
200~880mVp-p
DVB-ASI Output
Interface Type
BNC Female, 75Ω
200Mb/s
Data type
Byte
Packet Length
188/204 Bytes
Output Waveform Level
800±80mVp-p
IEEE 802.3, 10/100/1000 Base-T
Input: 200Mb/s, Output: 200Mb/s
Data Encapsulation
UDP, RTP, SPTS, MPTS
Other Protocols
ICMP, ARP, IGMPv2
TS/IP Multiple Stream, Output Only
IEEE 802.3, 10/100/1000 Base-T
Output: 200Mb/s
Data Encapsulation
UDP, RTP, SPTS, MPTS
Other Protocols
ICMP, ARP, IGMPv2
QAM Modulation
Standard of System
16/32/64/128/256QAM
Symbol Rate
3~7.2MS/s
I/Q Amplitude Error
≤ 0.1%
I/Q Phase Error
≤ 0.1%
Phase Jitter
< 0.5°RMS
36dB min., 42dB typ. (with tester
MER
equalizer “off ” )
COFDM Modulation
Standard of System
ETSI EN 300 744
Constellation
QPSK/16QAM/64QAM
Bandwidth
5/6/7/8MHz
FTT carrier number
2K, 8K
Guard Interval
1/4, 1/8, 1/16, 1/32
FEC rate
1/2, 2/3, 3/4, 5/6, 7/8
MER
RF Output
Interface
F-type Female, 75Ω
Output Level
90~120dBμV, step by 1dB
Spurious
≥60dBc @ 120dBuV
Return Loss
≥12dB(typ.)
Rear Panel
ASI In
1×BNC Female, 75Ω
4×BNC Female,
HD-SDI In
75Ω (DXP-5411EM-S only)
2×BNC Female,
ASI Out
75Ω (mirrored contents)
RF Out
1×F Type Female, 75Ω
Back-up RF In
Front Panel
Control
1×RJ-45, 10/100 Base-T
1×IP(GbE), RJ-45,
TS/IP
10/100/1000 Base-T
Display
20×2 character VFD
RF Monitor -20dB
Others
Operating Input Voltage
AC100~260V 50/60Hz
0~40℃
Storage Temperature
-10~60℃
Operating Humidity
10~90%, Non-condensed
38
Block Diagram
DXP-3410EM
DXP-4410EM/4411EM-H
DXP-4410EM/4411EM-S
DXP-5410EM/5411EM-S
DXP-5410EM/5411EM-H
39
DIH-4000V
Multi-Channel Low Bitrate H.264 Transcoder
The DIH-4000V low bitrate H.264
Transcoder is specially designed for
IPTV system, especially for those IPTV
systems over unmanaged network
architectures in which the bandwidth are
normally limited. Adopting the powerful
chipset and high quality compression
algorithm, the inputted video transport
stream can be compressed into relative
low bit rate (<600kbps/channel) while
the picture quality is guaranteed. DIH4000V supports both MPTS and SPTS
with a built-in IP re-multiplexer. DIH4000V is also suitable for the multiscreen
applications, where the inputted video
can be compressed into various bit
rates with different resolutions which are
suitable for Smart phones, Tablets, PC
and Flat screens simultaneously. DIH4000V can be managed and monitored
by user-friendly WEB interface.
Main Feature
• Comply with MPEG-2(MP@ML) and
MPEG-4 AVC Baseline,Main&HighProfile@
L4.0 or less
• Real-time monitoring on the rate of utilization
of CPU, running time, memory, etc.
• Last time memory for automatic encoding/
• Cpmply with MPEG-1 Layer II Audio, AAC,
MP3 Decoding and Encoding
• Up to 4 HD or 16 SD transcoding
• Support up to 200 IP output with maximum
bit rate of 100Mbps for each
• Off line local files transcoding
• Real-time monitoring on input bit rate, TS
counter error, output video/Audio bit rate,
transcoding after power recycles
• Re-multiplexer for PSI/SI editing PID pass
through/filtering/remapping, PCR
adjustment
• Keypad and LCD on front panel for status
monitoring and IP address setting
• Remote management over Web GUI
• Support 1:N redundency
PSI/SI information
Typical Application
40
IP Input
RJ45 x2pcs independent and full duplex
Interface
10000M/10M,900Mbps（Bandwidth<
1200Mbps）
UDP, ICMP, IGMP V1, V2, RTP (for reProtocol
multiplexer only)
IPaddress
Unicast, Multicast
Resource for transcoding
Local media files or TS/IP
Video/Audio format for Decoding
MPEG-2,H.264(baseline, main profile,
Video format
high profile)
Audio format
MPEG-1,MPEG-2,AAC
Re-Multiplexer
Format
SPTS/MPTS
Null packets processing
pass through or filtering
PSI/SI editing
TS processing
PID pass through/filtering/re-mapping
PCR adjustment
Bitrate
lower than 100Mbps for each SPTS
Numbers of TS
Maximum 200
IP Output
RJ45 x2pcs, 1000M/100M, full duplex,
Interface
900Mbps per RJ45 (Bandwidth <
1200Mbps)
Protocol
UDP, ICMP, RTMP, IGMP V1, V2, HTTP
IP address
Unicast, Multicast
Video/Audio format for Encoding
Video format
Audio format
Package Format
Video resolution
Video ratio
Video frame rate
Video bitrate
Audio sampling rate
Audio bitrate
Management
Interface
Protocol
Redundancy
General
Power supply
Working temperature
Storage temperature
Dimension
Weight
MPEG-2,H.264(baseline, main, high)
MPEG-1 L2 or AAC
MPEG-TS
720*480/720*576/544*576/480*576/352*5
76/352*288/1280*720
4:3/16:9
25fps, 29.97fps,30fps
User configuration, recommended value:
SD: High(800kbps), Medium(600kbps),
Low (512kbps)
HD: High(4000kbps), Medium( 2000kbps),
Low (1200kbps)
11.025KHz, 22.050 KHz, 44.1 KHz, 48
KHz
User configuration, recommended value:
32kbps, 64kbps, 128kbps
RJ45 x1pcs, 1000M/100M
HTTP Web GUI
1:N backup through IP
AC 110V~240V, 6A, 47~63Hz, Max.350W
5~45 ºC
-10~65 ºC
430mm*335mm*44mm
3Kg
*Note: all specifications are subject to change without notice
41
Specification
Re-Multiplexers
DCH-3000MX
8-Way Remultiplexer
The DCH-3000MX is an 8-way costeffective DVB re-multiplexer. It has
8 ASI input ports, 2 ASI output ports
and can re-multiplex up to 8 MPTS or
SPTS then generate a new MPTS. With
the built-in DVB PSI/SI re-generator,
DCH-3000MX provides on board
transport stream processing such as
PID remapping, program insertion and
deletion. It is remotely controlled and
supervised by SNMP based network
management software on PC. Its flexible
management and processing capabilities
give the DCH-3000MX a wide range
of application in digital TV broadcast
system.
Main Feature
• Re-multiplexing of up to 8 Transport Streams
• Flexible PSI/SI Processing
• Service or component based re-multiplexing
• 2 ASI outputs in mirror
• NIT, SDT, LCN edition, re-generation and
and Proprietary HDMS software
insertion
Multiplexing of up to 8
Transport Streams
Redundant ASI outputs
Remote Control and
Supervision by SNMP and
Proprietary HDMS software
42
ASI Input
Connector Type
Input bit rate
Data transmission mode
Packet Length
Signal Level
TS Processing
TS Input Management
PSI/SI
ASI Output
Connector Type
Output bit rate
Packet Length
Signal Level
Connector Type
8×BNC Female, 75Ω
≤ 216Mb/s
BYTE or BURST mode auto-detection
188 /204 bytes, auto-detection
200-800mVpp±10%
Remote Control
Local Control
Serial Port
Re-multiplexing up to 8 DVB-ASI inputs
2 ASI outputs in mirror
Service or component based
Remultiplexing, filtering and PID remapping
Equipment Upgrade
Physical
Dimension
Weight
Power Supply
Power Consumption
Storage temperature
Operating Humidity
2×BNC Female, 75Ω
≤ 108Mb/s
Byte
188 or 204 Bytes
200-800mVpp±10%
IP Control
SNMP, Proprietary HDMS Network System
Management Software
1×RS-232 9-pin D-sub, for debug use
only
FTP loader
44mm×483mm×340mm
3Kg Net, 4Kg Gross
AC 90V ~ 250V, 50/60Hz
24W
0 ~ 45℃
-10 ~ 60℃
10 ~ 90%, non-condensed
Block Diagram
43
Re-Multiplexers
Specification
Re-Multiplexers
DCH-5100MX
DCH-5100MX is a high density
advanced DVB transport stream remultiplexer and scrambler. It can receive
SPTS and MPTS from both GbE and
ASI input ports. By using the user
friendly web control interface, the input
TS is demuxed to SPTS, then routed
to the ASI and GbE output ports to
build new SPTS and MPTS with PSI/
SI regeneration or pass through. It can
support up to maximum 1024 PID with
re-mapping, bypass, filtering functions.
As an advanced option, DCH-5100MX
can provide with DVB scrambling
functions. It can support BISS-1, BISS-E
and Simulcrypt modes by using the DVB
common scrambling algorithm and builtin CW generator.
With its multiple TS over ASI and IP input
and output ports, flexible configuration
and powerful TS processing ability, DCH5100MX is a key routing equipment that
links the TV sources from professional
IRDs and encoders to DVB modulators
in the headend system.
Re-Multiplexer and Scrambler
Main Feature
• Support MPEG2/H.264 TS Re-Multiplexing
• EIT bypass or re-generation
• BISS 1/E, Simulcrypt mode Scrambling in
• PCR re-generation and correction function
advanced mode
• TS/IP through GbE port up to 950Mbps
• Support local or remote CAS synchronous
simulcrypt processing
input/output
• Null packet insertion for TS/IP transmission
• PSI/SI re-generation, insertion, NIT and SDT
edition
• Web remote management and SNMP
supervision
Order Information
Model
Function
ASI-In
TS/IP In
ASI-Out
DCH-5100MX
×4
×160
×8
Support Two switched GigE
ports inputs
Multiple ASI inputs and
outputs
Redundant power supplies
44
TS over IP
Connector type
Transmission mode
Operating Mode
Streaming Type
Number of streams
Type of TS Streaming
TTL
De-jitter
Effective Input Bit Rate
ASI Ports
Connector type
Standard
Input Return Loss
Minimum Input Level
Packet Length
Input bit rate
TS Re-Multiplexing
TS Input Management
Service and PID
management
PSI/SI
1000M Ethernet RJ-45 electrical
IPv4, ARP, UDP, RTP
Full duplex, Auto negotiable
Multicast or Unicast
160
SPTS or MPTS
1~255 (adjustable)
≤ 200ms
≤950Mb/s
4×BNC female, 75Ω
DVB-ASI, EN50083-9
15dB
200mV
Burst or Byte, 188 or 204 Byte/Packet
≤216Mb/s
Remultiplexing up to 4 DVB-ASI inputs and 160
MPTS/SPTS inputs
Service or component based Remultiplexing,
filtering and PID remapping
PSI/SI table regeneration,
NIT and SDT edition,
LCN Edition and Re-generation
PCR
Null packet
DVB Scrambling
Scrambling mode
Simulcrypt number per TS
Connector Type
Remote Control
Protocol
Local Control
Serial Port
Alarm and Contact Relay
Connector Type
PCR regeneration
Filtering or inserting
Simulcrypt, BISS-1, BISS-E
Maximum 4
1×RJ-45, 10/100 Base-T (for remote control)
SNMP, HTTP Web, Command Line
HTTP 1.1, SNMPv1&v2
LCD and 6-key on front panel
1×RS-232 D-sub 9-pin(for debug use only)
1×D-sub 9-pin
Dual colors LED on Front panel, Contact Relay
Alarm & Warning Indicator
on Rear panel
Trap
SNMP v1 & v2
Event Log
last 100 events logged in non-volatile memory
Power
Power Supply
AC 90V~250V, 50/60Hz
Power Consumption
50W
Physicals
Dimension
445mm×543mm×44mm
Weight
8Kg Net, 12Kg Gross
Temperature
Operating 0~45℃ ; Storage -10~60℃
Operating Humidity
Block Diagram
45
Re-Multiplexers
Specification
Re-Multiplexers
DXP-3800MX
8-to-2 DVB Remultiplexer
DXP-3800MX is a professional broadcast
DVB-TS Re-Multiplexer with dual
independent remultiplexing unit. It can
re-multiplex a large number of transport
streams received over ASI and GbE
interface and delivered via GbE interface
and 2 independent ASI output ports.
Remultiplexing up to 256 services with
advanced management of PSI/SI tables,
service filtering and remapping.
Main Feature
• Fully compliant with ISO13818 and EN300
468 standard
output) or 80Mbps(full duplex)
• Reultiplexing up to 256 services
• Dual MPEG2/H.264 transport stream
remultiplexing unit
• Advanced management of PSI/SI tables,
service filtering and remapping
• 8*ASI inputs, up to 216Mbps for each
interface
• EIT bypass or re-generate
• Web and SNMP control and monitoring
• 2*ASI independent outputs with backup, up
to 216Mbps for each interface
• Compact 1RU cabinet with dual hot-swap
power supplies
• GbE interface up to 700Mbps(multi-channel
Specification
Support TS/IP input/output
ASI Input
Connector Type
Standard
Input Bit Rate
TS over IP
Connector Type
Protocol
TS/IP Number
Max. Bit Rate
TS Processing
Max. Input Bit Rate
Max. Output Bit Rate
Package Length
Re-multiplexing
2 independent TS output
power supply
ASI output Monitoring
Connector Type
Standard
Function
Output Bit Rate
Connector Type
Control
Software Upgrade
Physical
Power Supply
Power Consumption
Temperature
Net Weight
Dimensions
Operating Humidity
Front Panel
Display
8×BNC female, 75Ω
DVB-ASI, EN50083-9
≤216Mb/s
1×RJ-45, 100/1000 Base-T
UDP/RTP, Multicast/Unicast, IGMP V2, V3
1 MPTS or SPTS (Full Duplex Mode); 10 MPTS (Multi-Channel Mode)
80Mb/s (Full Duplex Mode); 700Mb/s (Multi-Channel Mode)
8×216Mb/s
2×180Mb/s
188/204
PSI auto generation Service and PID filtering and re-mapping
NIT insertion and LCN edition EIT Processing
2×BNC female, 75Ω
DVB-ASI, EN50083-9
remux of 8 ASI inputs
≤216Mb/s
1×RJ-45, 10/100 Base-T, for equipment IP Control
Front panel, Web and SNMP
FTP Loader ,Telnet , USB and Web
AC90~260V 50~60Hz
50W
Storage -10 to 60℃; Operation 0 to 45℃
7kg
482mm×504mm×44mm
10 to 90%, non-condensed
2×20 LCD Display
46
Re-Multiplexers
Block Diagram
47
Modulators
DCH-3000TM
The DCH-3000TM is a flexible Digital
TV modulator and trans-modulator in the
market. Equipped with either of the tuner
input DVB-S/S2, DVB-C, DVB-T/T2 or
base band transport stream input ASI,
SPI or DS3, it can trans-modulate the
signal from satellite, cable or terrestrial
network to Digital cable network. It can
also be used as a stand-alone DVB-C
QAM or DVB-T COFDM modulator with
its ASI, SPI or DS3 input. Moreover
the tuner input can be re-multiplexed
with ASI.SPI or DS3 transport stream
input with powerful PSI/SI regeneration
function. It is a cost effective and highly
integrated solution with DVB-S/C/
T demodulation, transport stream remultiplexing, DVB-C QAM or DVB-T
COFDM modulation in a single rack.
The equipment can be easily configured
and supervised by the operator and
broadcaster, provide better service to his
cable TV network.
Single Channel QAM Transmodulator
Main Feature
• DVB-S/S2, DVB-C or DVB-T/T2 Tuner Input
• Agile RF output from 48 to 862MHz
• Tuner RSSI, received Eb/No & BER monitoring
• Flexible re-multiplexing between ASI and
• DVB-C QAM or DVB-T COFDM RF
modulation output
• Support Digital cable TV
ITU-T J.83 Annex A and B standard
• Support DVB-T ETSI-300 744 standard
• ASI input and output
• Maximum RF output level 120dBμV (for –
PlusXX series)
Tuner input
• PSI/SI re-generation, including NIT, LCN
edition and insertion
• Service Drop, PID filtering and Remapping
• Remote Control and Supervision by SNMP,
WEB and Proprietary HDMS software
DVB-S2/S, DVB-C or
48 ~ 862MHz agile RF output
ASI input and output
48
Tuner Input
Connector Type
Input Level
Symbol Rate
Roll-off Factor
FEC Code Rate
DVB-C Tuner Input
Connector Type
Input Frequency
Input Level
Symbol Rate
Constellation
Bandwidth
Input Return Loss
DVB-T Tuner Input
Connector Type
Input Frequency
Input Level
FFT Mode
Constellation
Guard Interval
FEC
ASI Input
Connector Type
Standard
TS Processing
Input Level
DS3 I/O (Option)
Connector Type
Standard
Frame Structure
Bit Rate
ASI Output
Connector Type
Standard
TS Processing
Signal level
TS Processing
TS Input Management
950~2150MHz
-25~-65dBm
2~45MBaud
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
0/22KHz selectable
DiSEqC 1.0
48~860MHz
45~75dBμV
16/32/64/128/256QAM
6MHz/7MHz/8MHz
7dB (typ.)
VHF: 174 ~ 230MHz; UHF: 470 ~ 862MHz
-20~-91dBm
2K/8K
QPSK/16QAM/64QAM
1/32, 1/16, 1/8, 1/4
1/2, 2/3, 3/4, 5/6, 6/7, 7/8
1×BNC, 75Ω
DVB-ASI, EN50083-9
Remultiplexing of ASI Inputs
800mVpp±10%
2×BNC Female, 75Ω, including loop through
G.804
44.736Mb/s
2×BNC Female, 75Ω
DVB-ASI, EN50083-9
2 mirrored TS, output sourcing from
remultiplexing among Tuner / DS3 and
ASI / SPI inputs
800mVpp±10%
Remux and demux among Tuner / DS3
(optional) and ASI / SPI inputs
PSI/SI
DVB-C QAM Trans-modulation
Constellation
Symbol Rate
I/Q Amplitude Error
I/Q Phase Error
Phase Jitter
MER
DVB-T COFDM Re-Modulation
Constellation
Bandwidth
FFT Mode
Guard Interval
Code Rate
MER
IF Output
Connector Type
Output Frequency
Output Level
MER
Frequency Offset
RF Output
Connector Type
Output Frequency Range
Output Level
Remux and demux for 2 mirrored ASI outputs
J.83 Annex A: 16/32/64/128/256QAM
J.83 Annex B: 64/256QAM
2~7.2MSymbol/s
<0.3%
<0.3°
<0.5°RMS
>35dB
QPSK/16QAM/64QAM
5/6/7/8MHz
2K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
>36dB
F type female, 75Ω
36MHz
90 dBμV
>38dB
±200HZ
F type female, 75Ω
48~860MHz agile, step by 10 KHz
90~120dBμV, step by 1dBμV
(for -PlusXX series
(for -30XX/-20A series)
Spurious Rejection
Output Return Loss
Connector Type
Remote Control
Local Control
Serial Port
Equipment Upgrade
Physical
Dimension
Weight
Power Supply
Power Consumption
Storage temperature
Operating Humidity
Certification
EMC: EN50083-2
LVD: EN 60065
55dB (typ.)
12dB (typ.)
1×RJ-45, 10/100 Base-T, for equipment IP
Control
SNMP, Proprietary HDMS Network
System Management Software
FTP loader
44mm×483mm×404mm
5.5Kg
AC 90V ~ 250V, 50/60Hz
30W
0~45℃
-10~60℃
49
Modulators
Specification
Modulators
Block Diagram
Order Information
DCH-3000TM-20X
Model
Interface
Tuner
-20S2
-20C
-20T
DVB-S2
DVB-C
DVB-T
ASI Input
DCH-3000TM-PlusX
-20A
-20D
●
DS3 Input
PlusS2
PlusC
PlusT
DVB-S2
DVB-C
DVB-T
PlusA
PlusD
●
●
●
×2
●
●
●
ASI TS Output
●
●
●
●
●
●
●
●
●
●
Filter
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Buit-in Re-Mux
RF Output
●
●
●
●
●
●
●
●
●
●
Ethemet
●
●
●
●
●
●
●
●
●
●
• standard configuration
50
IP to QAM Modulator
The DCH-5100TM is a professional high
density IP to DVB-C QAM modulator.
It receives up to 64 or 160 digital TV
transport streams from both Gigabit
Ethernet and ASI ports. After processing,
it can modulate these transport streams
to 16-way or 32-way QAM RF carriers.
For 16-way QAM modulator option, the
TS can be generated and re-multiplexed
from 160 SPTS/MPTS of ASI/IP inputs.
For 32 QAM modulator option, the remultiplexer function has to be disabled,
each QAM carrier is directly converted
from any one of the 64 TS from IP or
ASI input. These QAM RF carriers are
independently up-converted with high
speed DAC to achieve excellent RF
performance covering the full spectrum
up to 1GHz. The equipment is housed
in a 1-RU chassis with two AC power
supplies in redundancy.
Main Feature
• Compliant with ITU J.83 Annex A & C and
DVB-C EN300429 standards
• Up to 64 or 160 TS Inputs over GbE
• 16 or 32 independent QAM modulators
• Transport stream de-encapsulation from IP
of GbE port
• RF output backup port for 1+1 redundancy
• Redundant Power Supply
• 4 TS/IP GbE ports with 2 x RJ-45 & 2 x SFP,
2+2 redundancy mode
• Network Management through SNMP,
HTTP, CLI
• TS/IP input de-jitter ≤200ms
Support Two switched GigE
ports inputs
32 QAM output channels on
single RF output
DCH-5100TM
DVB IPQAM Modulator
Power
Warning
Alarm
RF Monitor
-20dB
DCH-5100TM
IP to QAM Modulator
Redundant power supplies
51
Modulators
DCH-5100TM
Modulators
Specification
IP Input
Connector Type
Output Return Loss
Shoulder Attenuation
Spurious Rejection
Spectrum Flatness
Useful Output Bit Rate
Connector Type
(1000Base-T + SFP) x 2, IEEE803.2, 2+2
redundant
IPv4, IGMPv2, IGMPv3, ARP, UDP, RTP
Full duplex, Auto negotiable
Multicast or Unicast
64 or 160 (software option)
SPTS or MPTS
1~256 (adjustable)
≤200ms
≤950Mb/s
Protocol
Operating Mode
Streaming addressing Type
Number of Streaming Input
Type of TS Streaming
TTL
De-jitter
Effective Input Bit Rate
ASI Input
Connector Type
4×BNC female, 75Ω
Standard
DVB-ASI, EN50083-9
Input Return Loss
15dB
Minimum Input Level
200mV
Input Data Mode
Burst or Byte, 188 or 204 Byte/Packet
Input Data Rate
≤216Mb/s
Re-Multiplexing (applicable to DCH-5100TM-16X)
TS Input Management
Remultiplexing up to 4 DVB-ASI inputs and
160 MPTS/SPTS inputs
Service and PID management Service or component based
Remultiplexing, filtering and PID remapping
PSI/SI
QAM Modulation
Standard
DVB-C EN300 429, J.83 Annex A & C
Symbol Rate
3.6MBauds~7MBauds
Roll-off Factor
12%, 15%, 18%
MER
>36dB (with Tester Equalizer = off)
Number of QAM Carrier
16 or 32 (software option)
RF Output
Connector Type
1×F type Female, 75Ω
Channel Spacing
6MHz, 8MHz
49 ~ 1000 MHz
Output Frequency Adjustment 1MHz
Step
Output Frequency Accuracy
±25ppm
Output Level
105dBuV (per channel)
Output Level Attenuation
30dB (step by 1dB)
Remote Control
Protocol
Local Control
Serial Port
RF Monitor Port
Alarm and Contact Relay
Connector Type
Alarm & Warning Indicator
Trap
Event Log
15dB min.
50dBc (typical.) @ BW±10%
60dBc (typical.)
4dB (over full output frequency range)
800Mb/s
1×RJ-45, 10/100 Base-T
(for remote control)
HDMS, HTTP 1.1
SNMP v1 & v2, HTTP 1.1
LCD and 6-key on front panel
1×RS-232 D-sub 9-pin (for debug use only)
1×F type female, 75Ω, -20dB lower than
the main RF output
1×D-sub 9-pin
Dual colors LED on Front panel, Contact
Relay on Rear panel
SNMP v1 & v2
last 100 events logged in non-volatile
memory
Sensors & Indicators
Temperature Sensor
Yes
Fan Status Sensor
Yes
Alarm Buzzer
Yes
Bit rate Capacity Indication
Yes (For each QAM)
Power Supply
Power Supply
AC 90V ~ 250V, 50/60Hz
Power Consumption
50Watts Max.
Physicals
Dimension
445mmx543mmx44mm
Weight
8Kg Net, 12Kg Gross
0 ~ 45℃
Storage Temperature
-10 ~ 60℃
Operating Humidity
10 ~ 90%, non-condensing
Certification
EMC: EN 55024:1998+A1:2001+A2:2003, EN 55022:2006+A1:2007, EN
61000-3-2:2006, EN 61000-3-3:2008
Environment: RoHS, WEEE
Block Diagram of DCH-5100TM-16X:
16 Diagram
Channel QAM modulation with Remux function
DCH-5100TM Functional Block
SFP 1
GbE 1
SFP 2
GbE 2
ASI In
ASI In
ASI In
ASI In
1
2
3
4
GbE PHY-1
GbE PHY-2
ASI
Receiver
ASI
TS
Processor
Transmitter
16 Channel
QAM
Modulation
RF
Amplifier
ASI Out
Keypad
LCD/LED
RJ-45
MCU
RS-232
AC
90-250V
AC
90-250V
Power
Supply -1
Power
Supply -2
RF In
Backup
RF Out
RF Monitor
20dB
52
Block Diagram of DCH-5100TM-32: 32 Channel QAM modulation without Remux function
SFP 1
GbE PHY-1
GbE 1
SFP 2
GbE PHY-2
GbE 2
ASI In
ASI In
ASI In
ASI In
Modulators
DCH-5100TM Functional Block Diagram
1
2
3
4
ASI
Receiver
ASI
TS
Processor
Transmitter
32 Channel
QAM
Modulation
RF
Amplifier
ASI Out
Keypad
LCD/LED
MCU
RJ-45
RS-232
AC
90-250V
Power
Supply -1
AC
90-250V
Power
Supply -2
RF In
Backup
RF Out
RF Monitor
20dB
Order Information
Model
Function
ASI-In
DCH-5100TM-16X
DCH-5100TM-32
x4
x4
Built-in Remux
YES
NO
TS/IP In
x160
x64
RF-In Backup
x1
x1
RF-Out
x1
x1
ASI-Out
Modulation
x1
x1
16 channel QAM
32 channel QAM
2
1
Alarm
ASI Out-1
RF Out
Backup
RF In
SFP 2
SFP 1
GbE 1
GbE 2
ASI Out-2
3
ASIIn
4
RS-232
Control
53
Modulators
DXP-3000IM
Professional QAM Modulator
DXP-3000IM is a single channel digital
T V m o d u l a t o r, w h i c h r e c e i v e t h e
transport stream from ASI or IP input and
modulate to DVB QAM or COFDM via
RF output. The built-in re-multiplexer can
be used to process the TS and generate
a new TS which can be output via ASI
output or TS/IP interface.
DXP-3000IM accommodated in 1U x 19”
standard chassis with 2 redundant power
supply modules. It is the most suitable
deployment choice for any system in
DVB, IPTV and Surveillance industries.
Main Feature
• DVB-C/QAM (ITU J.83 Annex A/C) or
DVB-T/COFDM RF out selectable
• 120dBμV Total Output Level
• ASI & TS/IP outputs
• built-in re-multiplexer
• SNMP & HTTP remote control & monitor
• Software could be upgraded with Web
interface
• EIA 1U x 19” standard chassis with 2
redundant power supply modules
• Full duplex TS/IP input and output
Block Diagram
54
DVB-ASI Input
Interface Type
BNC Female, 75Ω
100 Mb/s
Data type
Byte
Packet Length
188/204 Bytes
Valid Receiving Amplitude
200~880mVp-p
DVB-ASI Output
Interface Type
BNC Female, 75Ω
120Mb/s
Data type
Byte
Packet Length
188/204 Bytes
Output Waveform Level
800±80mVp-p
IEEE 802.3, 10/100/1000 Base-T
80Mb/s
UDP/RTP
SPTS or MPTS
Protocols
ICMP, ARP, IGMPv2
QAM Modulation
Standard of System
16/32/64/128/256QAM
Symbol Rate
3~7.2MS/s
I/Q Amplitude Error
≤ 0.1%
I/Q Phase Error
≤ 0.1%
Phase Jitter
< 0.5°RMS
36dB min., 42dB typ. (with tester equalizer
MER
“off ” )
COFDM Modulation
Standard of System
ETSI EN 300 744
Constellation
Bandwidth
FTT carrier number
Guard Interval
FEC rate
MER
RF Output
Interface
Output Level
Spurious
Return Loss
Rear Panel
ASI In
ASI Out
RF Out
Back-up RF In
Front Panel
Control
TS/IP
Display
RF Monitor -20dB
Others
Operating Input Voltage
Storage Temperature
Operating Humidity
QPSK/16QAM/64QAM
5/6/7/8MHz
2K, 8K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
F-type Female, 75Ω
90~120dBμV, step by 1dB
≥60dBc @ 120dBuV
≥12dB(typ.)
1×BNC Female, 75Ω
2×BNC Female, 75Ω (mirrored contents)
1×RJ-45, 10/100 Base-T
1×IP(GbE), RJ-45, 10/100/1000 Base-T
20×2 character LCD
AC100~260V 50/60Hz
0~40℃
-10~60℃
55
Modulators
Specification
Accessories
DCH-2000AD
SDI/DVB-ASI Active Signal Splitter
DCH-2000AD is a high-density active
DVB-ASI/SD-SDI signal splitter, which
can duplicate one SDI (SMPTE 259M)
or DVB-ASI (EN50083) signal to 4 or 8
signals. In each 1RU unit, either 4 groups
of 1 to 4 splitter or 2 groups of 1 to 8
splitter can be implemented. It provides
clock regeneration and equalization
of the input signals and it allows more
Main Feature
than 100 meter signal distribution. DCH-
• Compatible with DVB-ASI EN50083 and SDI
2000AD is a reliable ASI/SDI signal
splitting device that could be widely used
in broadcast system redundancy.
SMPTE 259M standards
• DVB-ASI and SD-SDI source automatic
detection
• LED indication of input lock and bit rate on
front panel
• Provides automatic input cable re-clocking
and equalization to 100 meters (Beldon
• DC 12V backup power supply
8281)
duplicates single SDI or
DVB-ASI signal to 4 or 8
outputs
Dual Color LED indication
of input lock and rate on
front panel
DC 12V backup power
supply
56
Input
Connector Type
Input Port Number
Input Return Loss
ASI/SDI Input Amplitude
Output
Connector Type
Output Number
ASI/SDI Output
Amplitude
Local Monitoring
2 x LED indication of input lock for
DCH-1000AD-218
BNC Female, 75Ω
4 or 2
≥15dB (5~270MHz)
200~1000mV
Physical
Dimension
Weight
Power Supply
Power Consumption
Storage Temperature
Operating Humidity
BNC Female, 75Ω
4* or 8*
800mVpp±10%
44mm×483mm×255mm
AC 90V~250V, 50/60Hz
5W
0~45℃
-10~60℃
* the input signal cannot be looped through when power is off.
4×LED indication of input lock for
DCH-1000AD-414
Block Diagram
Order Information
Functionality
Model
Input interface
Output interface
DCH-2000AD-218
DCH-2000AD-414
2
4
2×8
4×4
57
Accessories
Specification
Accessories
DCH-2000AV
Audio/Video 1+1 Redundancy Switch
DCH-2000AV is an 1+1 analog base
band audio/video redundancy switch.
Three groups of independent 1+1 switch
are implemented in a single 1RU chassis.
Each switch has 1 primary audio/video
input port, 1 backup audio/video input
port and 2 audio/video output ports in
mirror. The primary port is automatically
switched to the back-up port in case
of primary port failure by using built-in
analog video signal quality monitor. The
change-over condition is the detection of
consecutive synchronization of analog
TV signal. DCH-2000AV uses RF Relay
switch to ensure reliable transition from
primary to secondary input port in the
case. With its high performance and
stability, DCH-2000AV is an ideal product
for broadcast system redundancy.
Main Feature
• 3 groups of 1+1 redundancy switch in
compact 19”1RU chassis
• Support NTSC, PAL and SECAM standards
• Automatic or manual switching mode
• User-configurable automatic switch back to
primary
• Remote Control and Supervision by HTTP
WEB
selection
3-in-1 redundant switch
within a compact 19” 1RU
chassis
LED alarm on front panel
Remote Control and
Supervision by HTTP WEB
58
Frequency Response
Analog Video
Number of input
Number of output
Connector type
Video Standard
White level amplitude
Horizontally sync. amplitude
K-factor
Differential gain
Differential phase
Chroma-Luma Gain
Chroma-Luma Delay
Nonlinear Luminance
Horizontal Sync Edge Jitter
Frequency Response
Analog Audio
Number of input
1 Primary input and 1 Backup input for
each of the 3 Groups of 1+1 Switch
2 Outputs in mirror for each of the 3
Groups of 1+1 Switch
RCA female, 75Ω
NTSC or PAL, or SECAM
±3mVpp
±2mVpp
0.1%
0.1%
0.05°
1.5%
±13ns
0.2%
±1.5p-p
0.5MHz ~ 4.8MHz, ±0.4 dB; 5.5MHz,
+1/-2 dB
1 pair primary inputs and 1 pair backup
input for each of the 3 Groups of 1+1 Switch
2 Outputs in mirror for each of the 3
Groups of 1+1 Switch
Number of output
Connector type
Output Impedance
Total Harmonic Distortion
RCA female, Stereo L/ R
600Ω (balanced)
60Hz -10kHz, 0.02%
Amplitude
Audio/Video Switching
Switching Mode
Switching Condition
Switching Time
Power Failure Switching
Connector Type
Remote Control
Local Control
Serial Port
Equipment Upgrade
Physical
Dimension
Weight
Power Supply
Power Consumption
Storage temperature
Operating Humidity
Left: 40Hz -15Hz, ±0.5dB
Right: 40Hz -15kHz, ±0.5dB
1kHz, 0dB, ±0.5dB
Auto/Manual
Video signal loss, Video loss of Sync by 3
times in 1 sec, or Audio mute period
longer than user’s setting
< 300 ms
Mechanical by pass through relay when
power failure
IP Control
HTTP Web
Built-in FTP server + Telnet
483mm×220mm×44mm
3Kg Net, 4Kg Gross
AC 90V ~ 250V, 50/60Hz
12W
0~45℃
-10~60℃
* Note: Video parameters are measured using standard test signal (PAL D, 1Vpp, S/N=60dB).
Audio parameters are measured using standard test signal (Mono, 0dBu, S/N=85dB).
Block Diagram
59
Accessories
Specification
Accessories
DCH-3000AL
DVB-ASI 1+1 Redundant Switch
DCH-3000AL is a digital TV redundant
switch based on DVB-ASI standard.
It has 6-way 1+1 ASI switches in
1RU chassis. the ASI signal will be
automatically routed to backup port
if technical failure of the primary port
happens. The switching condition is
supervised by a built-in comprehensive
TS monitor which can continuously
analyze the quality of each ASI input
stream. Furthermore, it can detect up to
8 PIDs as the switching conditions for
each way. By using the RF delay, it can
ensure rapid transition from primary port
to buck-up port with high performance
and stability. It also can be controlled
and supervised by SNMP and HTTP
Web. DCH-3000AL is an ideal product
for broadcast system redundancy.
Main Feature
• Compatible with DVB-ASI (EN50083-9)
standard
• TS sync loss and PIDs loss as switching
condition
• Up to 6 independent 1+1 switching modules
in 1RU 19”chassis
• Mechanical Bypass Relay to output in the
event of power failure
• Built-in real time transport stream monitoring
• DC 12V backup power supply
• Input and Output bit-rate up to 160 Mb/s on
• Remote control, supervision and by SNMP
each switch module
and HTTP Web
• Automatic or manual switch mode
Switch to the back-up
transport stream source
automatically when
problems occur
Up to 6 independent
switch modules in 1RU 19”
chassis
DCH-3000AL
DVB-ASI 1+1 Redundant Switch
DC 12V backup power
supply
60
ASI Input
Input Interface
Connector Type
TS Bit Rate
Packet Format
ASI Switching
Switching Mode
Switching Condition
Switching Time
Power Failure Switching
ASI Output
Output Interface
Connector Type
TS Bit Rate
Packet Format
12 (6 primary, 6 secondary)
BNC, 75Ω
< 160Mb/s
188 /204 byte packets, without RS code
Primary/Secondary, Auto/Manual
TS Sync Loss and up to 8 PID losses
< 300 ms
Mechanical by pass relay
12 (6×2 duplicated outputs)
BNC, 75Ω
< 160Mb/s
188/ 204 byte packets, without RS code
Connector Type
Local Control
LCD
LED
Physical
Dimension
Weight
Power Supply
Power Consumption
Storage Temperature
Operating Humidity
RS232 (DB-9), for PC configuration and
software upgrade
2×10 characters LCD display
7 (one for Power indicator, the others for
switch status)
44mm×483mm×240mm
AC 90~260V, 50Hz/60Hz
25W (MAX)
0~45℃
-10~60℃
Block Diagram
61
Accessories
Specification
Accessories
62
Compact Modular Digital TV Headend
DMM-1000 is a compact modular digital
TV headend that includes professional
MPEG-2 and MPEG-4 AVC/H.264 SD/
HD IRD, MPEG-2 and MPEG-4 AVC/
H.264 SD/HD Encoder/Transcoder,
Re-Multiplexer, QAM/COFDM TransM o d u l a t o r, D u a l C h a n n e l A n a l o g
Modulator, DVB Scrambler and so on.
Within a 4U×19" chassis, it provides
8 slots for any type of modules and 2
redundant power supply units. Thanks for
its flexibility and high density, DMM-1000
offers operators the advanced headend
architectures in the marketplace for
delivering analog and digital broadcast
services to their subscribers. Coming
with more new modules, DMM-1000 is
most suitable for future multiple network
architectures: streaming and multiplexing
of digital content over IP based networks
and conversion of digital content for
analog networks.
Main Feature
• DVB-S2/S, DVB-S, DVB-C, DVB-T2/T IRD
• Web, SNMP Remote Control or handheld
modules with CI
programmer unit local control
• DVB-S/S2T/T2 to DVB-C QAM and DVB-T
• 4RU 19”chassis compact modular design,
COFDM trans-modulator module
supporting up to 8 modules
• MPEG-2, H.264 HD/SD encoder and transcoder module
• Functional module hot-swappable
• 8 Way re-multiplexer module
• Intelligent cooling system with temperature
• DVB Simulcrypt, BISS-1, BISS-E scrambler
• Stand alone function of each module
module
• Cost-saving by backward compatible with
• Rich interface with ASI, IP, SDI, YPbPr,
new modules
CVBS, XLR
• On site software update through IP
Independent Hot-Swappable
Functional Modules
Product List
Five hot-swappable fans
assembly for longer MTBF
Product name
RID
Encoder Transcoder
Redundant power supply
unit
DMM-1000
Re-Multiplexer
Scrambler
Modulator
Trans-modulator
Chassis Accessory
Model No.
Description
DMM-1510P
Single channel HD IRD
DMM-2200P
Dual Channel HD IRD
DMM-2410D
4-channel Demodulator
DMM-1300EC
Single Channel MPEG-2 SD Encoder
DMM-1520EC
DMM-2400EC/2401EC
4-channel HD/SD Encoder/Transcoder
DMM-2410EC/2411EC
4-channel H.264 HD Encoder
DMM-1400MX
8-way Re-multiplexer
DMM-2200MX/2200DX
Re-Multiplexer and Scrambler
DMM-2200TP
Dual Channel Scrambler
DMM-1300TM
QAM/COFDM Trans-modulator
DMM-1400PM
QAM/COFDM Trans-modulator
DMM-2400TM
4-channel Trans-modulator
DMM-1000MF
4U chassis with 8 slots
DMM-210MF
2U chassis with 8 slots
DMM-1000CU
Programmer Unit
63
Modular Digital TV Headend DMM-1000
DMM-1000
Chassis
DMM-1000MF Main Chassis
• Standard 4 RU chassis with 8 slots for functional modules and
2 slots for Power Supplies
• Hot-backup power supply unit
• Intelligent cooling system with temperature sensor
• Wall mounted or Rack mounted
• Compatible with new successive modules
• Power Supply: AC 90V-250V, 150Watts, 50-60Hz
• Optional Build-in IP Switch
• Dimension: L=387mm, W=483mm, H=176mm (4U)
• Operating temperature: 0 ~ 45℃(for all modules)
• Storage temperature: -10 ~ 60℃(for all modules)
DMM-210MF Main Chassis
• Standard 1 RU chassis with 2 slots for functional modules
• 1 power supply
• Intelligent cooling system with temperature sensor
• Wall mounted or Rack mounted
• Compatible with new successive modules
• Power Supply: AC 90V-250V, 150Watts, 50-60Hz
• Dimension: L=387mm, W=483mm, H=44mm (1U)
DMM-1000CU Programmer Unit
• 2×20 LCD display screen and 6-key keypad
• No external power nor battery needed
• Easy and quick on site system configuration without PC
• Compatible with new modules
• Dimension 170×70×22 mm
64
DMM-1510P Series
Professional HD/SD IRD and Processor Module
As the up-to-date PBI’s professional IRD and HDTV Processor of DMM1000 series, DMM1510P succeeds all functions from DMM-1500P, and exceeds the previous generation in terms
of performance & functionalities. DMM-1520P could support two AC-3 audio or down-mixed PCM
audio pass-through over SDI and AES-EBU. The integrated decoder complies with MPEG-4 (AVC
high profile level 4.1) and MPEG-2 (MP@ML&MP@HL) standards. Depending on the hardware
configuration, DMM-1520P is able to support various optional of reception for DVB-T2/T, DVB-S2/
S, DVB-C, DTMB, ASTC, ISDB-T, TS over IP, and ASI input. Equipped with two CI slots, multidescramble could be achieved by working with professional CAM modules. The descrambled stream
could be delivered to the ASI output directly, or to the built-in re-multiplexer, or to the IP Output.
Meantime, the decoded video could be outputted via HDMI, SDI with embedded audio, and CVBS
(down scaled) interfaces. The built-in re-multiplexer could accept transport streams from tuner,
ASI input, IP input, and the descrambled stream from CI slot, and output stream could be highly
customized through the user-configurable PSI/SI regenerator. The compact design and the powerful
decoding ability make DMM-1520P one of the most competitive modules in DMM1000 series.
Main features
• Factory optional for DVB-S2/S/C/T2/T, DTMB, ISDB-T and ATSC demodulations
• MPEG-2 (MP@ ML& MP@HL) and MPEG 4 Part 10 (AVC high profile level 4.1) standards
compliant and decoding
• Wide choice of I/O interfaces, including ASI input/output, CVBS output, HDMI output, SD/HD-SDI
output (embedded 2 pairs stereos audio), AES/EBU output, 10M/100M/1000M TS over IP input/output
• PLS(Physical Layer Signalling) function available on DVB-S2 tuner
• Single or Multi PLP(Physical Layer Pipe) function available on DVB-T2 tuner
• Built-in 1 TS re-multiplexer
• BISS 1 or BISS E decryption
• Dynamic PMT detection and automatic update
• Support Tuner, ASI input and TS over IP input redundance
• VBI TELETEXT, WSS and Closed Caption support over analog output or embedded in SDI
• 10M/100M/1000M Ethernet TSoIP Input and Output
• UDP/RTP & Unicast/Multicast for TS over IP input and output
• DVB (MPTS) and IPTV (SPTS) mode IP output
• Control and surveillance over WEB or HDMS software remotely
• Two DVB-CI slots, support multiple programs decryption
• Software up-gradable in the field easily through USB or update remotely by Web interface
• Support audio embedded in SDI output
• Support NTP(Network Time Protocol)
• Support16 groups of parameters configuration preset
• RSSI, received Eb/No & BER available on Web interface
65
H.264 HD IRD and Processor Module
Specification
Tuner Input
DVB-S/S2
Connector Type
Input Level
Symbol Rate
Roll-off Factor
FEC Code Rate
Voltage
DVB-T/T2
Connector Type
Input Frequency
Input Level
Constellation
Bandwidth
FFT Mode
Guard Interval
FEC Code Rate
Input Return Loss
DVB-C
Connector Type
Input Level
Symbol Rate
Constellation
Bandwidth
Input Return Loss
TS over IP
Effective Bit Rate
Protocol
TS Processing
TS Input Management
Service and PID
Management
Descrambler
BISS Mode
Common Interface
ASI Output
0/22KHz selectable
DiSEqC 1.0
female 75Ω for Loop through
-20~-70dBm
256QAM
6MHz, 7MHz, 8MHz
DVB-T: 2K/8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
51~862MHz
45~75dBμV
1~7Mbaud (ITU J.83 Anne× A)
256QAM
6MHz, 7MHz, 8MHz
7dB (typ.)
1×RJ-45, 10M/100M/1000M Base-T for
TS/IP
80Mb/s for full duplex with ProMPEG
FEC,
200Mb/s for full duplex without ProMPEG
FEC,
500Mb/s for 32xSPTS IP out only
UDP/RTP, Multicast/Unicast, IGMPv3,
ARP
Connector Type
PSI/SI
950~2150MHz
-25~-65dBm
2~45MBaud
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9,9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
Demu× and Remu× among Tuner, ASI
Input and TS/IP Input
Demu× and Remu× for ASI output
Remu×, filtering and remapping
PSI/SI table regeneration, PMT and SDT
edition
(CSA)
BISS-1, BISS-E
Connector Type
Standard
Output Bit Rate
TS Processing
A/V Decoding
Video Standard
Audio Standard
HDMI Output
Standard
1xBNC female, 75Ω
DVB-ASI, EN50083-9
≤200Mb/s
TS Re-multiple×ed from Tuner, ASI Input
and TS/IP Input
MPEG-2(MP@ ML for SD, MP@HL for HD)
MPEG 4/H.264 AVC Part 10 (MP@L3 for
SD, HP@L4.1 for HD)
LC-AAC, HE-AAC
1080i×30, 1080i×29.97,
1080i×25,720p×60,720p×59.94,
Rate
720p×50, 480p×60, 576p×50, 576i×25,
480i×29.97
Audio Embedded
1×stereo
HD/SD-SDI Output(Can be configured as ASI Output)
Connector Type
1xBNC, female, 75Ω
Standard
SMPTE 259M, 270 Mb/s for SD, SMPTE
292M, 1.485 Gbit/s for HD
Level
800mV p-p
1080i×30, 1080i×29.97, 1080i×25,
Rate
720p×60, 720p×59.94, 720p×50,
576i×25, 480i×29.97
≤50Mb/s
Video PID Bit Rate
Digital Audio Output
Connector Type
SDI embedded
Number of Output
2 pairs of audio PCM downmix or passed
through by SDI
Audio Sampling Rate
32K, 44.1K and 48 KHz
Analog Audio Output
Connector Type
1×DB9 female with 2 pairs of BNC
adaptor 75Ω, or
1×DB9 female with 1 pairs of XLR
adaptor 600Ω
Output Mode
Number of Output
1×DB9 female with 2 pairs of BNC
adaptor 75Ω, or
1×DB9 female with 1 pairs of XLR
adaptor 600Ω
>70dB
THD
Frequency Response
Analog Video Output
Connector Type
1×BNC
CVBS Standard
Video PID Bit Rate
≤50Mb/s
Norminal Output Level
Frequency Response
YPbPr
Chroma-Luma Delay
<±30 ns
<2%
<1%
<2%
Differential Gain
<3%
Differential Phase
<2°
Subtitle
DVB, EBU
VBI
Telete×t, WSS
Closed Caption
EIA 608, EIA 708, EIA 608-to-708
SDI Embedded
Teletext, WSS, Closed Caption
Redundancy
Redundancy Port
Switching Condition
TS Sync Loss or no PAT packet
Switching Mode
Main, Spare
66
1 × R J - 4 5 , 1 0 M / 1 0 0 M B a s e - T, f o r
equipment IP Control
SNMP v1/v2, HTTP (Web Interface),
Management System)
Handset display and 6-key keypad with
VGA interface
Remote Control
Local Control
Equipment Upgrade
Physical
Power Supply
Power Consumption
Storage temperature
Operating Humidity
WEB HTTP or USB or Telnet
DC 3.3V/5V/12V
20W
0~45℃
-10~60℃
Block Diagram
Order Information
-20X
AV Output
ASI In x1
ASI Out x1
CI x2
HD/SD SDI x1
SD SDI x1
HDMI x1
CVBS x1
Audio L/R x2
OR
TSoIP
Upgrade
Control
-22X
-30X
-32X
FrontEnd Options: DVB-S2, DVB-T2, ISDB, ATSC, DTMB, DS3
Factory default: X=S2
Input
TS Input
TS Output
CI
DMM-1510P
Model
Interface
Audio XLR x1
GbE RJ45 x1
USB x2
RJ45 x1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
67
Control & Management
Connector Type
DMM-2200P Series
Twin Professional HD/SD IRD and Processor Module
DMM-2200P is a high-density, cost-effective modular receiver equipped with two
independent tuners, which can be chosen respectively from DVB-T2/S2/S/C/T/T2 inputs.
DMM-2200P supports a wide range of application by combining dual tuner processing
capability with MPEG2, H.264, SD/HD video decoding and industry standard outputs
including ASI, CVBS, HDMI, TS/IP. It has 2 DVB common interface slots capable of working
with most of well-known CAS in the market to de-crypt multiple pay TV services. The
compact dual-tuner design and the powerful decoding ability make DMM-2200P one of the
most competitive modules in DMM1000 series.
Main features
• SD/HD MPEG-2(MP@ML&MP@HL) and MPEG-4/H.264(AVC high profile level 4.1)
digital Video decoding
• Twin-tuner design, wide tuner options from DVB-S2/S/C/T/T2
• 2x DVB-CI Slots, Multi Programs, BISS 1 and BISS E decryption
• Support services re-mux/filter and 204/188 transfer
• UDP/RTP & Unicast/Multicast SPTS and MPTS over IP I/O
• Support VBI TELETEXT, EBU/ DVB Subtitle, Closed Caption
• Dynamic PMT detection and automatic updating
• Multiple Analog and Digital Outputs, ASI, CVBS, HDMI, TS/IP
• Support NTP(Network Time Protocol)
• Remote Control and Supervision by SNMP and HTTP WEB
• Quick upgraded via USB port
• Auto save settings when sudden power-off
Specification
Tuner Input
Connector Type
Input Level
Symbol Rate
Rolling-off Factor
Punctured Rates
LNB Polarization
LNB Band Switching Tone
DiSEqC
DVB-C Tuner Input
Connector Type
Input frequency
Input level
Symbol rate
Constellation
Bandwidth
Input return loss
Connector Type
Input frequency
Input level
2×F type female 75Ω for input
950~2150MHz
-25~-65dBm
2~45MS/s for QPSK and 8PSK
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
Constellation
Bandwidth
FFT mode
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Guard interval
0/22KHz selectable
DiSEqC 1.0
Input return loss
TS over IP
Connector Type
Useful bit rate
51~862MHz
45~75dBuV
1~7MS/s (ITU J.83 Annex A)
16/32/64/128/256QAM
6/7/8MHz
7dB (typ.)
FEC code rate
Protocol
Uni/Multicast
TS Processing
TS input
TS output
Re-mux
BISS descramble
-20~-70dBm
DVB-T: QPSK/16-QAM/64-QAM
256QAM
6MHz/7MHz/8MHz
DVB-T: 2K/8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
1×RJ45, 10/100M for TS/IP
70Mb/s for 10/100M
ARP
support maximum 32 channel uni/multicast
output
Tuner1, Tuner2 or TS/IP input
2 independent ASI outputs
Re-mux services, edit PSI/SI
BISS-1, BISS-E
68
CI slots
ASI Output
Connector Type
Standard
Output bit rate
HDMI Output
Standard HDMI
Video Resolution
2×PCMCIA Slots, comply with most major
CAMs in market
Analog Audio Output
Connector Type
Output type
Baseband Data Output
Subtitle
VBI
Closed Caption
A/V monitor
Monitor Port
Monitor Condition
Connector Type
Remote Control
Local Control
Software Upgrade
General
Power supply
Power consumption
Storage temperature
Operating Humidity
2×BNC Female, 75Ω
DVB-ASI, EN50083-9
≤160Mb/s
1×HDMI 1.3 interface (partial)
1080i×30, 1080i×29.97, 1080i×25,
720p×60, 720p×59.94, 720p×50,
480p×60, 576p×50, 576i×25, 480i×29.97
Audio Embedded
1×Stereo or Loop Through
Digital Video/Audio Processing
MPEG-2(MP@ ML for SD, MP@HL for HD),
Video Standard
MPEG 4/H.264 AVC high profile level 4.1
Audio Standard
LC-AAC, HE-AAC
Analog Video Output
Connector Type
1×BNC female
Video Standard
Video bit rate
≤50Mb/s
1×DB9, 600Ω, has a DB-9 to XLR converter
DVB/EBU
Teletext, WSS
EIA 608, EIA 708, EIA 608-to-708
HDMI, CVBS
User define
1×RJ45, 10/100M, for equipment IP Control
SNMP, HTTP Web
Handheld Programmer Unit
1×USB Port or FTP loader
DC 3.3V/5V/12V
20W
0~45℃
-10~60℃
Block Diagram
Order Information
Interface
Input
Output
Model
DVB-S2/S
DVB-T2/T/C
CI
TS/IP
HDMI
CVBS&Audio L/R
ASI
TS/IP
DMM-2200P-S2
DMM-2200P-T2
×2
×2
×2
×2
●
●
●
●
●
●
×2
×2
●
●
69
DMM-2410D Series
Professional Quad Demodulator
The DMM-2410D professional Quad Demodulator provides operators an ideal solution for
multiple channel receiving and remultiplexing operations. Equipped with 4 independent
tuners and 1 TS over IP inputs, DMM-2410D ensures compatibility with all transmission
media, such as DVB-S2/S/T/T2/C and so on. The DCH-2410D's remultiplexing capabilities
enable the creation of new transport streams that are subsets of the original inputted
stream. Customized services may be output as multiple SPTS or MPTS over IP, as well as
over ASI. All these architectures make the DCH-2410D an ideal product for DTV signals
receiving and demodulation.
Main features
•
•
•
•
•
•
•
Variety of tuner factory options DVB-T2/S2/S/C/T/T2 and TS/IP
Built-in TS re-multiplexer receives 4xTuner and TS/IP input
Dynamic PMT detection and automatic updating
UDP/RTP, Unicast/Multicast, and SPTS/MPTS over IP
Remote Control and Supervision by SNMP, HTTP WEB and Proprietary HDMS software
On Site software update through IP
RSSI, received Eb/No & BER monitoring
Specification
Connector Type
Input Level
Symbol Rate
Roll-off Factor
FEC Code Rate
DVB-C Tuner Input
Connector Type
Input Level
Symbol Rate
Constellation
Bandwidth
Return Loss
Connector Type
Input Frequency
Input Level
950~2150MHz
-25~-65dBm
2~45MBaud
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DiSEqC 1.0
0/22KHz selectable
4×F type female 75Ω
48~860MHz
45~75dBμV
1~7MBauds (ITU J.83 Anne× A)
16/32/64/128/256QAM
6MHz/7MHz/8MHz
7dB
DVB-T2: QPSK, 16QAM,
64QAM,256QAM
Bandwidth
FFT Mode
6MHz/7MHz/8MHz
DVB-T: 2K/8K
FEC Code Rate
Return Loss
TS over IP
Connector Type
Protocol
Effective Bit Rate
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB (typ.)
UDP/RTP, Multicast/Unicast, IGMP 2, V3
Support 3 different mode (reboot is
needed to change the TS/IP mode):
1. Max.430Mb/s, output only, 5x multicast/
unicast MPTS (TS comes from Tuner 1
to 4 pass through, 1x channel from
built-in Remux)
2. Max.430Mb/s, output only,
128x multicast/unicast SPTS (TS comes
from either tuner 1 to 4 or built-in Remux)
3. Max.80Mb/s, full duplex, 1x multicast/
unicast MPTS/SPTS input and output
Connector Type
Remote Control
-20~-70dBm
Constellation
Guard Interval
Software Upgrade
Physical
Power Supply
Power Consumption
Weight
Storage temperature
Operating Humidity
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
IP Control
System)
FTP Loader and Telnet
DC 3.3V/5V/12V
15W
560g
-10 to 55℃
70
Block Diagram
Order Information
Model
Interface
Tuner Input
Output
DVB-S/S2
DVB-T/T2
DVB-C
ASI
TS/IP
DMM-2410D-S2/S
DMM-2410D-T2/T
DMM-2410D-C
×4
×4
×4
×4
×4
×4
●
●
●
71
MPEG-2 SD encoder module
DMM-1300EC Series
Single Channel MPEG-2 SD Encode
• Digital SDI with embedded digital audio input
• Analog Composite Video for PAL/NTSC/SECAM Input
• MPEG-2 MP@ML Video encoding
• User configurable GOP
• User configurable 4:3/16:9 aspect ratio
• PAT, PMT and SDT generation and NIT Insertion
• 10/100M IP Output, UDP/RTP & Unicast/Multicast SPTS and MPTS
• Remote Control and Supervision by SNMP, HTTP WEB and Proprietary
HDMS software
Specification
Video Compression
Analog Input
Digital Input
Video Resolution
Aspect Ratio
Video output Bit rate
Audio Compression
Audio Channels
Audio Sampling Rate
Audio Output Bit rate
Analog Audio
Analog CVBS
SD-SDI
SDI embed audio
TS Processing
Analog NTSC, PAL and SECAM
SD-SDI (SMPTE-259M)
MPEG-2 MP@ML
480i (720x480) @29.97Hz: SMPTE125M
576i (720x576) @25Hz: ITU-R BT.656-4
4:3/16:9 selectable
1.5 ~ 20Mb/s
PSI/SI
TS over IP Output
Connector Type
Useful bit rate
Protocol
ASI Output Interface
Connector Type
Output bit rate
Packet Length
Signal Level
onnector Type
1 pair of stereo
32, 44.1, 48 KHz
32, 64, 128, 192, 256, 384 Kb/s
RCA female, Stereo L/ R
RCA female, 75Ω
1×BNC female, 75Ω
Group 1 to 4 selectable
Remux and demux for mirror ASI outputs
edition
1×RJ45, 10/100M for TS/IP
70Mb/s for 10/100M
UDP / RTP, Multicast / Unicast, IGMPv2
ARP
2×BNC Female, 75Ω
≤ 99Mb/s
188 / 204 Bytes
800mVpp±10%
Remote Control
networ Management Software
Local Control
Software Upgrade
FTP loader
Order Information
DMM-XXXX-XX
Model
Interface
CVBS
SD-SDI Input
ASI Output
TS/IP Output
1300EC-30
●
1300EC-40
●
●
×2
×2
●
●
72
DMM-1520EC
DMM-1520EC is a highly adaptable single channel H.264 (MPEG-4 AVC) HD Encoder, which provide
users a high-level operation experience to meet the requirement of the Digital broadcasting market. The
DMM-1520EC support various input interface that include HD/SD-SDI, and CVBS. The compressed
stream could output via GbE IP and ASI. DMM-1520EC can encode two pairs of stereo audio with its 2nd
audio daughter board. With built-in re-multiplexer, DMM-1520EC could re-multiplex the SPTS generated
itself and a MPTS input from ASI or IP, which makes DMM-1520EC the most suitable deployment choice
for any broadcast system.
Main features
• Fully compliant with H.264 HP@Level 4.0 and MP@Level 3.0
• Multiple video resolution including 1080p, 1080i, 720p, 576i and 480i
• Multiple inputs, HD/SD-SDI, and CVBS for encoding
• Support GbE TS/IP input/output(full duplex)
• Built-in Re-mux can multiplex services from ASI Input, IP input with encoded service.
• Can edit PSI/SI
• Support VBR and CBR encoding mode
• Support 2 pairs of analog stereo audio encoding with optional extension audio board
• Remote Control and Supervision by SNMP, HTTP WEB
• 4RU 19” chassis compact modular design, supporting up to 8 modules
• Support Down scale without changing frame rate.
Specification
Video Input & Compression
Video Input
Chrominance Space
Video Resolutions&
Recommended Video
Encoding Bit Rates
1×HD/SD-HDMI(v1.3)
1×BNC for CVBS input
1×BNC for HD/SD-SDI input(for DMM1520-3x and DMM-1520-4x model only)
H.264/AVC HP@L4.0
4:2:0
2Mbps~30Mbps
1080p（1920x1080）@ 59.94 Hz，50 Hz
SMPTE296M: 6~30Mb/s
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 6~24Mb/s
1080i（1440x1080@25Hz, 29.97Hz
SMPTE274M: 5~24Mb/s
720p（1280x720）@50Hz, 59.94Hz
SMPTE296M: 4~24Mb/s
480i（720x480）@29.97Hz:
SMPTE656M: 2~10Mb/s
576i（720x576）@25Hz:
SMPTE656M: 2~10Mb/s
Audio Input & Compression
Audio Input
Sampling Rate
Audio Compression
Bit Rate
HDMI Embedded
Analog L,R audio input via a 2.5mm phone
jack SDI Embedded(for DMM-1520-3x and
DMM-1520-4x model only)
2nd analog L.R audio input via an
extension audio board(for DMM-1520-x2
model only)
MPEG1 Layer II Encoding (Mono, Stereo)
MPEG2 AAC-LC Encoding (Stereo)
MPEG4 AAC-LC Encoding (Stereo)
48KHz
MPEG1 Layer II: 32~256Kb/s (Both 2 pairs
of audio on DMM-1520EC-x2 model)
AAC-LC: 128~512Kb/s (1st pair of audio only)
DVB-ASI Input
Connector Type
Maximal Input Bit Rate
Packet Mode
Packet Length
Signal Level
DVB-ASI Output
Connector Type
Effectual Output Bit Rate
Packet Mode
Packet Length
Signal Level
GigE Full Duplex
GbE Full Duplex
Maximal Effectual Outpu
t Bit Rate
UDP/RTP
Protocol
Control&Monitoring
Connector Type
Remote Control
Local Control
Software Upgrade
Physical parameter
Power supply
Power Consumption
Storage Temperature
Storage Temperature
Humidity
1×BNC Female, 75Ω
100 Mb/s
Byte
188/204 Bytes
200~880mVp-p
1×BNC Female, 75Ω
1.5 Mb/s~70 Mb/s
Byte
188/204 Bytes
800±80mV
IEEE 802.3, 10/100/1000 Base-T
80Mb/s
SPTS or MPTS
IGMPv2
1×RJ45, 10/100 Base-T, for equipment Control
SNMP, HTTP(WEB interface)
FTP loader and Telnet
DC 3.3V/5V/12V
<18W
0~45℃
0~45℃
-10~60℃
73
Block Diagram
Order Information
DMM-1520EC-XX
Model
Interface
Input
Output
TS/IP GbE
CVBS
Audio 1
Audio 2
SDI
ASI
ASI x2
-30
-32
-40
-42
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
74
DMM-2400EC/2401EC Series
4-Channel H.264 HD Encoder
• 4 SDI inputs with internal re-multiplexer in one module
• Support H.264 AVC HD Encoding
• Multiple video resolutions including 1080p 1080i, 720p, 576i and 480i
• Support down-scale function without changing frame rate
• Built-in TBC(Time Base Correction), very robust against to input signal intermittence
• Supports 1000 Base-T full duplex TS-over-IP
• Supports VBR and CBR encoding modes
• Accommodated in 4RU 19” chassis (DMM-1000MF) which supports up to 8 modules
and equipped with auto-backup Power Supply module.
Specification
Video Input & Compression
Video Input
Chrominance Space
Video Resolutions &
Recommended Video
Encoding Bit Rates
Audio Input & Compression
Audio Input
Sampling Rate
Audio Compression Bit Rate
DVB-ASI Input
Connector Type
Maximal Input Bit Rate
or 4×HD/SD-SDI
H.264/AVC HP@L4.0
4:2:0
2Mbps~30Mbps
1080p（1920x1080）@ 59.94 Hz，50 Hz
SMPTE296M: 6~30Mb/s
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 6~24Mb/s
1080i（1440x1080@25Hz, 29.97Hz
SMPTE274M: 5~24Mb/s
720p（1280x720）@50Hz, 59.94Hz
SMPTE296M: 4~24Mb/s
480i（720x480）@29.97Hz:
SMPTE656M: 2~10Mb/s
576i（720x576）@25Hz:
SMPTE656M: 2~10Mb/s
HD/SD-SDI Embedded
MPEG1 Layer II Encoding
MPEG2 AAC-LC Encoding, MPEG4
AAC-LC Encoding
48KHz
AAC-LC: 128~512Kb/s
1×BNC Female, 75Ω
100 Mb/s
Packet Mode
Packet Length
Signal Level
DVB-ASI Output
Connector Type
Effectual Output Bit Rate
Packet Mode
Packet Length
Signal Level
GigE Full Duplex
GbE Full Duplex
Maximal Effectual Output Bit
Rate
UDP/RTP
Protocol
Control&Monitoring
Connector Type
Remote Control
Local Control
Software Upgrade
Physical parameter
Power supply
Power Consumption
Storage Temperature
Humidity
Byte
188/204 Bytes
200~880mVp-p
1×BNC Female, 75Ω
1.5 Mb/s~70 Mb/s
Byte
188/204 Bytes
800±80mV
IEEE 802.3, 10/100/1000 Base-T
80Mb/s
SPTS or MPTS
ICMP, ARP, IGMPv2
1×RJ45, 10/100 Base-T, for equipment
Control
Quick upgrade via USB, or FTP loader
and Telnet
DC 3.3V/5V/12V
20W (Max.)
0~45℃
-10~60℃
Order Information
Interface
Video Input
TS Input
TS Output
Digital Audio
Model
HD/SD SDI
HDMI
ASI
TS/IP(GbE)
ASI (1+1)
TS/IP(GbE)
AAC-LC
DMM-2400EC-S
DMM-2400EC-H
x4
DMM-2401EC-S
DMM-2401EC-H
x4
x4
x4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
75
Block Diagram
76
DMM-2410EC/2411EC
4-way Encoder/Transcoder Series
DMM-2410EC/2411EC are a series of high density H.264 HD/SD & MPEG-2 SD real time
encoders/transcoders. This blade type design integrates 4 independent encoders/transcoders,
1 Re-multiplexer, 1 ASI_in, 1 ASI_out, and 1 Gigabit (GbE) TS/IP port. New MPTS could be
generated with the built-in Re-multiplexer from any combination of services among ASI_in,
TS/IP_in and the local encoders. HD-SDI and CVBS inputs are available as factory hardware
options.
All models provide two TS/IP operation modes. The first is “Full Duplex”, which allows one
MPTS or SPTS inputted to make up a new MPTS with local encoders, then sends the new one
over IP & ASI_out. In the second mode “Multiple output” which delivers up to five streams over
IP. There are four un-stuffed SPTS (lower bit rate but less PCR accurate than normal SPTS,
from local encoders) and one MPTS (from internal Re-multiplexer) over the IP with different
Unicast or Multicast IP addresses. All models support transcoding function. They accept an
MPTS and transcode up to 4 channels inside and the final output is formed as an MPTS and/
or 4 un-stuffed SPTS.
Main features
• Compliant with H.264/AVC Baseline, Main & High Profile @ L4.0 or less & MPEG-2 MP@ML
• 4 independent AV inputs (SDI, CVBS, note: see Model List)
• Independent Encoding/Transcoding mode control
• Internal reMultiplexer, new MPTS is made up from ASI_in, TS/IP_in & Local Encoders
• MPTS remultiplexed and 4 local un-stuffed SPTS available over IP
• Video Input Resolution: 1080i, 720p, 576i, 480i (note: CVBS models support SD only, see Model List)
• Minimum Video Bit Rate 500Kb/s (Standard PAL or NTSC SD video, while total bit rate ~ 700Kb/s)
• Independent Vertical & Horizontal pixel scale
• Transcoding from MPEG2 to H.264/AVC & vice versa
• VBR & CBR mode for encoding/transcoding
• Audio coding: MPEG1 Layer II, MPEG2/4 AAC-LC , HE-AAC(note: see Model List)
• SNMP & HTTP WEB for monitoring & control
Block Diagram
77
1-ASIOut-2
1
3
2
4
Specification
Video Input & compression Coding
4×SDI, or 4×CVBS (note: see Model
Video Input Interfaces
List)
Coding Profile & Level
Sampling Format
Video Resolution &
Recommend Compression Bit
Rate H.264
H.264/AVC BLP, MP, HP @ L4.0 or less,
MPEG-2 MP@ML (note: see Model List)
4:2:0, 10-bit, YCbCr
600K~20Mbps
1080i（1920x1080）@25Hz , 29.97Hz
SMPTE274M: 1~13Mb/s
1080i（1440x1080@25Hz, 29.97Hz
SMPTE274M: 5~24Mb/s
720p（1280x720）@50Hz, 59.94Hz
SMPTE296M: 1~13Mb/s
480i（720x480）@29.97Hz:
576i（720x576）@25Hz:
Video Resolution &
Rate MPEG 2
480i (720×480) @29.97Hz:
SMPTE656M: 3~10Mb/s
576i (720×576) @25Hz:
SMPTE656M: 3~10Mb/s
Video Resolution Down
Scaling
Vertical & Horizontal adjustable
respectively (frame rate is not scalable)
4:3, 16:9 Selectable
Aspect Ratio
Audio Input & Compression Coding
SDI Embedded or Analog (note: see
Audio Input Interfaces
Model List)
MPEG1 Layer II
Coding Standard
MPEG-2/4 AAC-LC/HE-AAC(V1, V2)
(available on DMM-2410EC series)
Sampling Rate
48KHz
MPEG1 Layer II :32~192Kbps(mono),
64~384Kbps( stereo)
Rate
MPEG-2/4 AAC-LC :24~256Kbps(mono),
48~512Kbps( stereo)
MPEG2/4 HE-AAC(V1, V2) :
16~128Kbps(mono), 32~256Kbps(
stereo)
Transcoding
H.264 to MPEG-2, H.264 to H.264,
Transcoding Mode
MPEG-2 to MPEG-2, MPEG-2 to H.264
MPTS, MPEG2 MP@ML MP@HL,
MPTS, H.264/AVC Main/High/Baseline
Input Standard
Profile @ L4.0 or less (but not FMO,
ASO & RS of Baseline)
MPTS and/or un-stuffed TS, MPEG2
MP@ML
MPTS and/or un-stuffed TS, H.264/AVC
Main/High/Baseline Profile @ L4.0 or
less (but not include FMO, ASO & RS of
Baseline)
Output Standard
DVB-ASI Input
Input Interface
BNC Female, 75Ω
Maximum Bit Rate
100 Mb/s
Data Type
Byte
Packet Length
188/204 Bytes
Signal Level
200~880mVp-p
DVB-ASI Output
Input Interface
BNC Female, 75Ω
Effective Bit Rate
120Mb/s
Data Type
Byte
Packet Length
188/204 Bytes
Signal Level
800±80mV
TS/IP Gigabit Ethernet (note: see Model List)
Standard
IEEE 802.3, 10/100/1000 Base-T
80Mb/s (note: Full Duplex mode) ,
200Mb/s (note: Multiple Output mode)
SPTS or MPTS
Encapsulation
Protocol
UDP, RTP, ICMP, ARP, IGMPv2
Rear Panel options
4×BNC Female, 75Ω (DMM-2410EC-S
SDI In
or DMM-2411EC-S, see Model List)
ASI In
1×BNC Female, 75Ω
2×D-Sub15 (with D-Sub 15 to BNC
CVBS In & Analog Audio In
female adapter cablings, total 4 sets of
inputs, see Model List)
ASI Out
Front Panel
Control
1×RJ-45, 10/100 Base-T
TS/IP
1×RJ-45, 10/100/1000 Base-T
1×Power, 4x Encoder Status, 1x ASI/IP
LED
Status
Press for 5 second or more to return the
IP Reset
default IP address of control port
Reset
Local reset
Others
Power
DC 3.3V/5V/12V
0~40℃
Storage Temperature
-10~60℃
Operating Humidity
10~90% (Non-condensed)
Order Information
Interface
Input
TS Input
TS Output
Model
HD/SD SDI with
Embedded Audio
HDMI with
Embedded Audio
CVBS & Analog Audio
DMM-2410EC-S
DMM-2411EC-S
x4
x4
DMM-2410EC-H
DMM-2411EC-H
x4
x4
DMM-2410EC-C
DMM-2411EC-C
x4
x4
ASI
●
●
●
●
●
●
TS/IP(GbE)
●
●
●
●
●
●
ASI (1+1)
●
●
●
●
●
●
TS/IP(GbE)
●
●
●
●
●
●
Audio AAC-LC /HE-AAC
●
●
●
78
DMM-1400MX
Re-multiplexer Module
•
•
•
•
•
•
8-way SPTS or MPTS ASI inputs
Redundant ASI outputs
Gigabit Ethernet for TS over IP Output
PSI/SI table regeneration, NIT, EIT and SDT edition, LCN Edition and Re-generation
Remote Control and Supervision by SNMP and Proprietary HDMS software
On Site software update through IP
Specification
ASI Input
Connector Type
Input Bit Rate
Packet Length
ASI Output
Connector Type
Output bit rate
Packet Length
Signal Level
PSI/SI generating
Connector Type
Remote Control
Local Control
Software Upgrade
TS over IP
Connector Type
Effective Bit Rate
Protocol
8×BNC Female, 75Ω
≤ 216Mb/s
BYTE or BURST mode auto-detection
2×BNC Female, 75Ω
≤ 216Mb/s
Byte
188 or 204 Bytes
800mVpp±10%
PAT, PMT, SDT, CAT, NIT, EIT Actual P/F, EIT Schedule
SNMP, Proprietary HDMS network Management Software
FTP loader
80Mb/s for 1000 Base-T
UDP / RTP, Multicast / Unicast, IGMPv2, ARP
79
Re-Multiplexer
Block Diagram
Order Information
Model
DMM-1400MX-30
DMM-1400MX-40
ASI In
x8
x8
ASI Out
x2
x2
Interface
TS/IP(GbE)
●
TS/IP IN
●*
TS/IP Out
●
th
*The 8 ASI Input is not availble whe TS/IP Input is enabled
80
DMM-2200MX / DMM-2200DX Series
Re-Multiplexer and Scrambler Module
DMM-2000MX/DX is a series of high density advanced DVB transport stream re-multiplexer and
scrambler modules. It can receive SPTS and MPTS from both GbE and ASI input ports. By using the
user friendly web control interface, the input TS is demuxed to SPTS, then routed to the ASI and GbE
output ports to build new SPTS and MPTS with PSI/SI regeneration or pass through. It can support
up to maximum 256 PID or 32 TV services per TS with re-mapping, bypass, filtering functions. PCR
jitter is improved by PCR correction and re-stamping features.
As an advanced option, DMM-2200MX/DX can provide with DVB scrambling functions. It can support
BISS-1, BISS-E and Simulcrypt modes by using the DVB common scrambling algorithm and built-in
CW generator.
With its multiple TS over ASI and IP input and output ports, flexible configuration and powerful TS
processing ability, DMM-2000MX/DX is a key routing equipment that links the TV sources from
professional IRDs and encoders to DVB modulators in the headend system.
Features
• MPEG2 and MPEG4/H.264 TS Re-Multiplexing
• BISS 1/E, Simulcrypt mode Scrambling in advanced mode
• TS Input and Output from both ASI and IP
• ASI Input or Output up to 160Mbps
• TS/IP through GbE port up to 860Mbps input/output
• TS/IP in UDP/TCP/RTP, Multicast and Unicast modes
• Null packet insertion for TS/IP transmission
• Maximum processing of 32 services or 256 PIDs per TS
• Service, component, data de-multiplexing, filtering and re-multiplexing
• PCR re-generation and correction function
• PID and service remapping, bypass, filtering, conflict detection
• PSI/SI re-generation, insertion, NIT and SDT edition
• EIT bypass or re-generation
• TS Analyzer with TS, service bit rate and alarm supervision
• Web remote control and SNMP supervision
Order Information
Model
DMM-2200MX
DMM-2200MX-TP
DMM-2200DX
DMM-2200DX-TP
ASI In
×8
ASI Out
×2
Remultiplexer
●
×8
×2
×2
×2
×8
Interface
Ethernet Management
RS-232
TS/IP In
TS/IP Out
●
●
●
DVB Scrambling
TS/IP (GbE)
●
×8
●
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
×1
2
2
8
8
32
32
32
32
81
Specification
ASI Ports
Number
Input bit rate
Output bit rate
Data mode
Packet Length
Signal Level
Connector type
TS over IP
Transmission mode
Number of streams
Input and output Bit Rate
Encapsulation
FEC(option)
PCR clock reference
Connector type
TS Processing
Maximum throughput
Maximum TS
Maximum service
Service management
Component management
EMM, ECM and private
data
10
≤ 213Mb/s
≤ 160Mb/s
BYTE or BURST auto-detection
200-800mVpp±10%
BNC Female, 75Ω
Bandwidth management
(option)
PSI/SI and Data
PSI/SI
Multicast or Unicast , IGMP V2/V3
64, 128 or 256
Maximum 420Mb/s, future extension to
860Mb/s
UDP or UDP/RTP 1-7 TS packets in each
IP packet
Pro MPEG COP#3 (SMPTE 2022) future
evolution
PCR regeneration
1000M Ethernet RJ-45 electrical
21Gb/s
64 TS from IP and 8 TS from 8 ASI
64 services from each of 8 ASI port, 32
services if PCR regeneration
64 services from each of 64 TS over IP
Local service building
Live service input pass through, stop,
filtering, sharing and redundancy
Service proprieties’ edition and modification
Local component building
Live component input pass through, stop,
filtering, sharing, redundancy
EIT
Data(option)
DVB Scrambling
Scrambling mode
Simulcrypt number per TS
Processing capability
EMM
ECM
Connector Type
Local Control
Remote Control
Equipment Upgrade
Physicals
Power Supply
Power Consumption
Temperature
Operating Humidity
Crossing and filtering
Transport stream and service bit rate view
Quality of service definition, service
policing, Overflow prevention
Regeneration and edition tables and
descriptors through on line editor
Tree structure view in XML format
Pass through, regrouping, automatic
remapping of TS ID, ON_ID and Service ID
in the EITs from different ASI and IP inputs
Opportunist data insertion to replace null
packets
Simulcrypt, BISS-1, BISS-E
Maximum 4
<54Mb/s per TS
Maximum number 64; Protocol TCP or
UDP; Maximum bandwidth 8Mb/s
Maximum number 64; Protocol TCP;
Maximum bandwidth 3.8Mb/s
RJ-45, 10/100 Base-T
16 LED, Support external key pad with LCD
display and 6-key
HTTP Web, SNMP future extension
HTTP web page
DC 5V, 5A
25W
Operating 0~45℃; Storage -10~60℃
Block Diagram
82
DMM-2200TP
Dual Channel DVB Scrambler
DMM-2200TP is a professional broadcast level Twin DVB-TS Scrambler module,which
can support 2 TS streams scrambling with one signal unit. Each ASI Out ports can output
independent scrambled TS streams or transparent loop through input TS stream out. It can
support up to four different Simulcrypt scramble or BISS 1/E scramble by using the DVB
common scrambling algorithm and built-in CW generator. With its high performance and
stability, DMM-2200TP can be widely used in current or new-style DVB-S/T/C digital TV
headend system.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fully compliant with IOS13818 and EN300 468 standard
Support MPEG2/H.264 TS stream scrambling
Support BISS 1/E, Simulcrypt scrambling
2*ASI for SPTS/MPTS input, up to 213Mbps for each ASI.
2*ASI for independent MPTS output, up to 52Mbps for each scrambled TS.
Can process maximum 48 EMM and ECM for each scramble tunnel
Support most major CAS in market
Support local or remote CAS synchronous simulcrypt processing
Support error alarm of TS level
Support statistics of PID and service bit rate
Support PSI/SI insertion or re-generation
IP GbE interface with up to 860Mbps input/output (transparent TS)
Large cache with powerful output buffer against burst overflow
Web remote management and SNMP supervision
Order Information
Interface
ASI Input
ASI Scrambling Output
ASI Loop-through Output
Re-Multiplexing
Scrambling
TS/IP Interface(GbE)
Ethernet Interface
RS-232
Model
DMM-2200TP
×2
×2
×2
●
●
×1
×1
×1
Specification
TS over IP
Connector Type
Connector Type
Protocol
Transport type
IP Stream type
IP Jitter
Input/Output Bit Rate
ASI Input/Output
Deterministic Jitter(peak)
Random Jitter(peak)
Return Loss
Data Format
Packet Length
Input Bit Rate
1×RJ45, 1000Base-T full duplex, IEEE803.2
IPv4, IGMPv2/V3, UDP, RTP
Multicast
SPTS/MPTS
200ms
≤860Mb/s
Connector Type
2×BNC female, 75Ω for Input
2× BNC female, 75Ω for Scrambling Output
2×BNC female, 75Ω for Loop Though Output
Standard
Receiving Sensitivity
Input Voltage
Output voltage
Rising Time
Falling Time
DVB-ASI, EN50083-9
≤200mV
200~880mV
800±80mV
≤1200ps
≤1200ps
Output Bit Rate
Input/Output Service
Quantity
TS Scrambling
Scrambling Algorithm
Scrambling Mode
Connector Type
Remote Control
Front Panel Operation
≤10%
≤8%
15dB
Byte / Burst / Auto
188(byte) / 204(burst) / Auto
≤213Mbps/per port (transparent TS)
≤213Mbps/per port (transparent TS)
≤213Mbps/per port (scrambled TS)
256 PIDs/32 services
DVB common scrambling algorithm, built-in
CW generator
Simulcrypt, BISS 1/E
1×RJ-45, 10/100 Base-T, for equipment IP
Control
SNMP, HTTP (Web Interface)
LCD Display, Buttons control
83
Digital TV Modulator and Trans-Modulator
DMM-1300TM Series
Single Channel Transmodulator
• DVB-S2/S, DVB-C or DVB-T Tuner Input
• ASI input and output
• Flexible re-multiplexing between ASI and Tuner inputs
• PSI/SI adapting and re-generation, including NIT insertion, LCN insertion etc.
• Service Drop or PID filtering and Re-mapping
• Remote Control and Supervision by SNMP, HTTP WEB and Proprietary
HDMS software
Specification
Tuner Input
Connector Type
Input Level
Symbol Rate
Roll-off Factor
Punctured Rates
LNB Polarization
DVB-C Tuner Input
Connector Type
nput Frequency Range
Symbol Rate
Constellation
Input Level
Bandwidth
Input Return Loss
DVB-T Tuner Input
950~2150MHz
-25~-65dBm
DVB-S QPSK: 5~45MS/s; DVB-S2 8PSK
10~31MS/s
DVB-S QPSK: 0.35; DVB-S2 8PSK: 0.35,
0.25, 0.2
DVB-S2 8PSK: 2/3, 3/4, 3/5, 5/6, 8/9, 9/10
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
0/22KHz selectable
Input Level
-20~-70dBm
Constellation
Carrier Bandwidth
FTT Mode
Guard Interval
FEC Code Rate
ASI Input
Connector Type
Standard
Input Bit Rate
Package Length
TS Processing
QPSK, 16-QAM, 64-QAM
6/7/8 MHz
2K/8K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
Remux and demux between Tuner and ASI
Inputs
Service and PID
management
PSI/SI
ASI Output
Connector Type
Standard
TS Processing
1×BNC Female, 75Ω
DVB-ASI, EN50083-9
≤ 100Mb/s
188 or 204 Bytes
1×BNC Female, 75Ω
DVB-ASI, EN50083-9
2 mirror TS Re-multiplexing from Tuner and
ASI inputs
DVB-C Re-Modulation
Constellation
Symbol Rate
I/Q Amplitude Error
I/Q Phase Error
Phase jitter
MER
DVB-T Re-Modulation
Constellation
Bandwidth
FFT Mode
Guard Interval
Code Rate
MER
RF Output
Connector Type
Output Level
Spurious Rejection
Output Return Loss
Connector Type
48~860MHz
1~7MS/s (ITU J.83 Annex A)
64/128/256 QAM
-15~15dBmV
6/7/8MHz
7dB (typ.)
174~230MHz (VHF); 470~860MHz (UHF)
Connector Type
TS Input Management
Remote Control
Local Control
Software Upgrade
J.83 Annex A: 16/32/64/128/256QAM;
J.83 Annex B: 64/256QAM
3~7.2MS/s
< 0.3%
< 0.3°
< 0.5°RMS
> 35dB
QPSK/16QAM/64QAM
5/6/7/8MHz
2K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
>36dB
F type female, 75Ω
55dB (typ.)
12dB (typ.)
FTP loader
84
DMM-XXXX-XX
Model
Interface
Tuner
ASI Input
Built-in Re-mux
ASI Output
QAM Modulation
COFDM Modulation
1300TM-S2C
1300TM-CC
1300TM-TC
-S2/S
-C
-T
●
●
●
●
●
●
●
●
●
●
1300TM-AC
1300TM-S2T
1300TM-CT
1300TM-TT
-S2/S
-C
-T
1300TM-AT
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
DMM-1400PM Series
Professional IRD and Trans-modulator Module
DMM-1400PM is a professional IRD and trans-modulator products, which combine IRD and modulator
into one module. It can receive signal from multiple sources such as DVB-S2/S/C/T/T2, de-modulate
to TS stream, descramble with CAM card, then modulate to DVB-C QAM RF signal or DVB-T COFDM
or DVB-T2 or DTMB RF signal. With its GbE full duplex IP interface, it also support TS over IP input/
output function. With its high performance and stability, DMM-1400PM is your best choice for various
broadcast system or SMATV system.
Main features
•
•
•
•
•
•
•
•
•
•
•
Multiple inputs DVB-S2/S/C/T/T2, TS/IP, and ASI optional
DVB-C QAM or DVB-T COFDM or DVB-T2 or DTMB RF modulation output
Supports 2K/4K/8K FFT Mode for DVB-T COFDM modulation
GbE UDP/RTP, Unicast/Multicast, and SPTS/MPTS over IP(full duplex)
Flexible re-multiplexing among Tuner, ASI and TS/IP inputs
PSI/SI adapting and re-generation, including NIT, LCN insertion etc.
Service Drop or PID filtering and Re-mapping
2 x DVB-CI slots, Multiple TV program decryption
Remote Control and supervision by SNMP, HTTP WEB
On Site software update through IP or USB
Specification
Tuner Input
Connector Type
Input Level
950~2150MHz
-25~-65dBm
DVB-S: 0.35
DVB-S2: 0.2, 0.25, 0.35
Roll-off Factor
FEC Code Rate
DVB-C Tuner Input
Connector Type
Input Level
Symbol Rate
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
0/22KHz selectable
DiSEqC 1.0
1×F type female 75Ω for Input,
1×F type female 75Ω for loop through output
48~862MHz
45~75dBμV
1~7MBaud(ITU J.83 Annex A)
Constellation
Bandwidth
Input Return Loss
DVB-T Tuner Input
Connector Type
Input Level
Modulation
Carrier Bandwidth
FTT Mode
Guard Interva
Viterb Error Correction
Code Rate
ASI Input
Connector Type
Standard
Input Bit Rate
Package Length
TS over IP
Connector Type
16/32/64/128/256QAM
6MHz/7MHz/8MHz
7dB(typ.)
1×F type female 75Ω for Input,
1×F type female 75Ω for loop through output
174~230MHz(VHF); 470~860MHz(UHF)
-20~-70dBm
QPSK, 16-QAM, 64-QAM
6/7/8 MHz
2K/8K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
1×BNC female, 75Ω
DVB-ASI, EN50083-9
≤ 100Mb/s
188 or 204 Bytes
1 x RJ-45, 1000 Base-T
85
Order Information
Effective Bit Rate
Protocol
TS Processing
800Mb/s
Unicast/Multicast, UDP/RTP, IGMPv2, ARP
TS Input Management
PSI/SI
Descrambler
Common Interface
Remux and demux among Tuner, ASI and
TS/IP inputs
Remux and demux for mirrored ASI outputs
PSI/SI table regeneration,
NIT and SDT edition,
LCN Edition and Re-generation
Double PCMCIA slots,
compatible with major CA CAMs in the
market
ASI Output
Connector Type
Standard
1 x BNC Female, 75Ω
DVB-ASI, EN50083-9
Can output TS Re-multiplexing from Tuner,
TS Processing
ASI and TS/IP inputs
DVB-C Modulation (for DMM-1400PM-xC model)
J.83 Annex A: 16QAM, 32QAM, 64QAM,
Constellation
128QAM, 256QAM
J.83 Annex B: 64QAM, 256QAM
Symbol Rate
3~7.2MS/s
I/Q Amplitude Error
< 0.3%
I/Q Phase Error
< 0.3°
< 0.5°RMS
Phase jitter
MER
> 35dB
DVB-T Modulation (for DMM-1400PM-xT model)
Constellation
QPSK, 16QAM, 64QAM
Bandwidth
5/6/7/8MHz
FFT Mode
2K/4K/8K
Guard Interval
1/4, 1/8, 1/16, 1/32
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
MER
>36dB
DTMB Modulation (for DMM-1400PM-xM model)
Constellation
QPSK, 16QAM, 64QAM, 4QAM-NR, 32QAM
Bandwidth
8MHz
Sub Carriers
1 or 3780
Guard Interval
1/4, 1/7, 1/9
FEC BCH LDPC
0.4, 0.6, 0.8
Time Inter-leaver Depth
240, 720
MER
>36dB
DVB-T2 Modulation (for DMM-1400PM-xT2 model)
Constellation
QPSK, 16QAM, 64QAM, 256QAM
Bandwidth
5/6/7/8MHz
FFT Mode
2K
Guard Interval
1/4, 1/8, 1/16, 1/32
Code Rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/60.8
MER
>38dB
RF Output
Connector Type
Output Level
Spurious Rejection
Output Return Loss
Connector Type
Remote Control
Local Control
Software Upgrade
1x F type female, 75Ω (primary output)
1x F type female 75Ω (-20dB for
monitoring)
55dB (typ.)
12dB (typ.)
1×RJ-45, 10/100M, for equipment IP Control
SNMP, HTTP (Web Interface)
Embedded FTP loader and Telnet or USB
Block Diagram
86
DMM-1400PM-XX
Model
Function
Tuner Input
ASI Input
Built-in Remux
ASI Out
GbE TS/IP
QAM Modulation
COFDM Modulation
T2 Modulation
-S2C
-CC
-TC
-DC
-S2T
-CT
-TT
-DT
S2T2
CT2
TT2
DT2
-S2M
-CM
-TM
-DM
DVB-S2
DVB-C
DVB-T
DS3-E3
DVB-S2
DVB-C
DVB-T
DS3-E3
DVB-S2
DVB-C
DVB-C
DS3-E3
DVB-S2
DVB-C
DVB-T
DS3/E3
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
DTMB Modulation
• Standard Configuration
DMM-2400TM Series
4-Channel Transmodulator
DMM-2400TM is a high density 4-Way modulator and trans-modulator module. It
could receive up to 4 independent TS streams from Tuner, ASI or TS/IP (note 1)
inputs, then modulates and combines them to 4 adjacent DVB-C RF carriers over
a coaxial output. Different types of inputs are available as factory options, such
as DVB-S/S2, DVB-C/T/T2 and ASI. With its built-in remux (note 1) functional
block, DMM-2400TM also provides TV program filtering and re-multiplexing of TS
inputs(note 2) to rebuild new TS outputs for modulation. TS/IP input is a software
option.
Main features
• 4 independent TS inputs from DVB-S2/C/T/T2 tuners or TS/IP or ASI
• Built-in remux for TS from Tuner or ASI (note 1, 2)
• Service and PID filtering and re-multiplexing
• PSI/SI re-generation, NIT and LCN Insertion (note 2)
• TS/IP GbE input supports RTP/UDP, IGMP V2/V3, Multicast/Unicast (note 1)
• 4 adjacent DVB-C QAM over 48 ~ 996MHz
• Excellent MER (>40dB) & BER (<10E-9)
• Web remote control and SNMP supervision
• Software update via Ethernet or USB port
Order Information
DMM-2400TM
30S2C
Tuner input
DVB-S/S2
30T2C
DVB-T/T2/C
30IC
×4
ASI-In
Built-in Remux
TS/IP In
RF-Out
Modulation
30AC
×4
×4
●
×4
×4
DVB-C
●
×4
×4
DVB-C
●
×4
×4
DVB-C
Note: when enable TS/IP In function, the remux function will be disabled.
87
×4
×4
DVB-C
Order Information
Specification
DVB-S/S2 Tuner Input (factory option)
Connector Type
Standard
EN 300 421(DVB-S), EN 302 307 (DVB-S2)
Frequency Range
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
DVB-S QPSK: 0.35
Roll-off Factor
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
FEC Code Rate
8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
13V for Vertical, 18V for Horizontal,
500mA Max., available only on tuner 1 &
Voltage
tuner 2
0/22KHz selectable, available only on
tuner 1 & tuner 2
DVB-C Tuner Input (factory option)
Connector Type
Standard
EN 300 429
51~862MHz
Input Level
45~95dBμV @ 256QAM, 6.875MBauds
Symbol Rate
1~7MBauds
Constellation
16/32/64/128/256QAM
Bandwidth
6MHz/7MHz/8MHz
Return Loss
7dB (typ.)
DVB-T/T2 Tuner Input (factory option)
Connector Type
Standard
EN 300 744(DVB-T), EN 302 755 (DVB-T2)
Input Frequency
Input Level
-20~-70dBm
DVB-T2: QPSK, 16QAM, 64QAM, 256QAM
Constellation
Bandwidth
FFT Mode
Guard Interval
FEC Code Rate
Return Loss
ASI Input (factory option)
Connector Type
Standard
6MHz/7MHz/8MHz
DVB-T: 2K/8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32,
1/64, 1/128
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
7dB
4×BNC female, 75Ω
DVB-ASI, EN50083-9
Input Bit Rate
≤216Mb/s
TS over IP Input (software option)
Connector Type
1×RJ-45, 100/1000 Base-T
Protocol
RTP/UDP, IGMP V2/V3, Multicast/Unicast
TS/IP Number
4 MPTS or SPTS
Max. Bit Rate
320Mb/s (total bit rate of 4 TS streams)
TS Processingof Built-in Re-Multiplexer (software option)
Max. Input Bit Rate
4×216Mb/s
Max. Output Bit Rate
4×108Mb/s
Package Length
188/204
PSI auto generation Service and PID
Re-multiplexing functions
remux, filtering and re-mapping NIT
insertion and LCN edition EIT Processing
DVB-C Modulation
J.83 Annex A, (Annex C available upon
Standard
request)
Constellation
16QAM, 32QAM, 64QAM, 128QAM,256QAM
Symbol Rate
2.5~6.99MS/s
BER
≤10E-9
MER
>40dB (with Tester Equalizer enabled)
RF output
2 x F type female(1 for -20dB Monitoring),
Connector Type
75Ω
Frequency Range
48~996MHz with a step of 1kHz adjustable
95~110dBμV with a step of 1dB
Output Level
adjustable, total of 4 carriers
Spurious Rejection
55dB (typical)
Return Loss
-10dB (typical)
ASI output Monitoring
Connector Type
1×BNC female, 75Ω
Standard
DVB-ASI, EN50083-9
Loop through Monitoring of either of 4
Function
Tuner or ASI inputs
Output Bit Rate
≤216Mb/s
Connector Type
IP Control
HTTP Web Interface and SNMP
Remote Control
Software Upgrade
FTP and Telnet through IP
Physical
Power Supply
DC 3.3V/5V/12V
Power Consumption
25W Max.
0 ~ 45℃
Storage Temperature
-10 ~ 55℃
10 ~ 90% Non-condensed
Operating Humidity
Note:
1. TS/IP input and re-multiplexer are exclusive software options. When the software for TS/IP input is loaded, the re-multiplexer function will be void,
vice versa.
2. TS/IP input is not allowed to use.
88
Block Diagram
89
90
DMM-1000AS
DMM-1000AS is a compact modular
SMATV headend, supporting up to
16 channels in one 19” 4U chassis. It
integrates multiple functions including
DTV signal reception, descrambling,
decoding and analog modulation. DMM1000AS has various options for RF
input front end, such as DVB-S/S2/T/
T2/C, ATSC, ISDB-T and DMBT etc.,
moreover, analog AV and IP input are
also available. Equipped with dual
DVB-CI, the DMM-1000AS module can
decrypt multiple pay TV services and
loop through the TS to the neighbor
modules through internal cables for
further processing. Each DMM-1000AS
module can process two MPEG-2 or
H.264 HD/SD services and downscale
the HD content to SD, then modulate
and output via two adjacent analog
RF channels. DMM-1000AS supports
various analog modulation standard,
such as PAL B/G, PAL D/K, NTSC, and
SECAM etc. Each DMM-1000AS module
can be controlled and supervised by
SNMP and HTTP WEB.
Compact Modular SMATV Headend
Main Feature
• Support various analog modulation standard,
such as PAL B/G, PAL D/K, NTSC, and
SECAM etc.
• DVB-S/S2/T/T2, ATSC, ISDB-T, DMBT front
end option
• Support IP input and analog AV input
• MPEG-2, H.264 HD/SD decoding
• Two adjacent analog RF channel output per
module
• Dual DVB-CI for multi-decryption
• TS loop through between modules
• Functional module hot-swappable
• Web, SNMP remote control or handheld
programmer unit local control
• 19” 4RU chassis compact modular design,
supporting up to 8 modules in one chassis
• Intelligent temperature control cooling system
• Stand alone function of each module
• Cost-saving by backward compatible with
new modules
• On site software update through IP or USB
Application Diagram
DVB-S / S2
TV
DVB-C
DVB-T
PAL / NTSC / SECAM
HFC
TV
IP
Network
IPTV / OTT TV
DMM-1000AS
AV
TV
Product List
Model No.
Description
DMM-1701PM
Dual Channel IRD and Analog Modulator Module
DMM-1701IM
Dual Channel IPTV Decoder and Analog Modulator Module
DMM-1701M
Dual Channel PAL/NTSC/SECAM modulator
DMM-1710PM
Advanced Dual Channel IRD and Analog Modulator Module
Signal Splitter
DMM-1701LD
8-Way Active Satellite Signal Splitter
Combiner and Amplifier
MM-1701CA
7-inputs Combiner and Amplifier
Product name
Analog Modulator Module
DMM-1000AS
91
Signals Processing Modules
DMM-1701PM series
DVB Tuner to Analog Trans-modulator
•
•
•
•
•
•
•
•
Multiple RF input front end option DVB-S2/S/C/T/T2, ATSC, ISDB-T, DMBT
Two adjacent analog channels output in range of 48-860MHz
Output level 100dBμV per channel
Support MPEG-2, H.264 SD/HD decoding
Remote Control and Supervision by SNMP and HTTP WEB
Support BISS-1, BISS-E descrambling
Dual DVB-CI for multi-decryption
DMM-1701IM series
Twin TS/IP to Analog Trans-modulator
•
•
•
•
•
Two IP multicast/unicast input ports
Two adjacent analog channels output in range of 48-860MHz
Supports MPEG-2, H.264 SD/HD decoding
Output level 100dBμV per channel
Remote Control and Supervision by SNMP and HTTP WEB
Alarm
DMM-1701M series
Twin Analog Modulator
• Two analog AV input
• Two adjacent analog channels output in range of 48-860MHz
• Modular design for easy installation and maintenance
• Output level 100dBμV per channel
92
VHF: △f ≤ 5KHz
UHF: △f ≤ 10KHz
DMM-1701M
77.5~97.5%
DMM-1701PM/1701IM
87.5%
≤2dB
≤7%
≤5°
≥45dB
Video carrier frequency
accuracy
Tuner Input (for DMM-1701PM Series)
Connector Type
950~2150MHz
Input Level
-25~-65dBm
DVB-S: 1~45MBauds/s for QPSK
Symbol Rate
DVB-S2: 1~45MBauds/s for QPSK, 8PSK
DVB-S: 0.35
Roll-off Factor
DVB-S2: 0.2, 0.25, 0.35
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
FEC Code Rate
8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Voltage
0/22KHz selectable
DiSEqC 1.0
DVB-C Tuner Input
Connector Type
51~858MHz
Input Level
40~85dBμV
Symbol Rate
1~7MBaud
Constellation
16/32/64/128/256QAM (ITU J.83 Annex A)
Bandwidth
6MHz/7MHz/8MHz
DVB-T Tuner Input
Connector Type
49~861MHz
Input Level
-25~-65dBm
Carrier Bandwidth
6/7/8 MHz
FTT Model
2K/8K
Guard Interval
1/4, 1/8, 1/16, 1/32
Viterb Error Correction Code
1/2, 2/3, 3/4, 5/6, 7/8
Rate
IP Input (for DMM-1701IM series)
Connector Type
2×RJ-45, 10/100M
Standard
UDP, RTP, Multicast, Unicast, MPTS, SPTS
A/V Input (for DMM-1701M series)
Video Input
2 sets of RCA, 75Ω
2 sets of RCA mono or A2(optional),
Audio Input
10Ω(unbalance)
Descramble (for DMM-1701PM series)
Descrambler
BISS Mode
BISS-1, BISS-E
Common Interface
Analog channels Modulation (for DMM-1701PM/1701IM/1701M)
Video
Video modulation depth
Video in-band flatness
Differential Gain
Differential Phase
Video S/N ratio
Chrominance/Luminance
delay
K factor of 2T pulse
Audio
△τ ≤45nS
≤4%
DMM-1701M
40~160KHz (D/K, B/G, I)
20~80KHz (M/N)
FM modulation deviation
DMM-1701PM/1701IM
40~100KHz (D/K, B/G, I)
50KHz (M/N)
Audio frequency response
±1.5dB (40Hz~15KHz)
≤1.2% (1KHz tone with ±60KHz(D/K, B/G,
Total harmonic distortion
I) or ±30KHz(M/N) FM deviation)
(THD)
6.5MHz±5KHz/6.0MHz±5KHz/5.5MHz±
1st audio carrier frequency
5KHz/4.5MHz±5KHz(basing on different
standards)
6.742MHz±5KHz/6.258MHz±5KHz/5.74
2nd audio carrier frequency
2MHz±5KHz/4.742MHz±5KHz(basing on
different standards)
Audio S/N ratio
≥55dB
Audio Pre-emphasis
50μS (B/G,D/K,I), 75μS (M/N)
RF Output (for DMM-1701PM/1701IM/1701M)
1×F type female, 75Ω (primary output)
Connector Type
1×F type female 75Ω (-20dB for monitoring)
48~860MHz adjacent, step by 10 KHz
Output Level
100±3dBμV
0~18dB adjustable, step by 1 dB
Output Return Loss
≥ 10dB
Connector Type
1×RJ-45, 10/100M, for equipment IP Control
Remote Control
System)
Local Control
Handheld programmer unit
Software Upgrade
Embedded FTP loader and USB
Physical
Dimension
379.7×111.5×39mm
Power Consumption
30W Max.
0- +45℃
Storage Temperature
-10~ +50℃
Operating Humidity
Order Information
Interface
Video Audio
PAL D/K
PAL D/K(Poland)
PAL B/G
NTSC
SECAM D/K
SECAM L
PAL-I
1701PM-XX
Model
DVB-T
DVB-S2
1701IM-XX
DVB-C
1701M-XX
MONO
02S2
A2
04S2
MONO
02T
A2
04T
MONO
02C
A2
04C
MONO
02
A2
04
MONO
02
A2
04
02S2
08S2
02T
08T
02C
08C
02
08
02
08
12S2
14S2
12T
14T
12C
14C
12
14
12
14
22S2
22T
32
34
22
32C
34C
22
32T
34T
22C
32S2
34S2
32
34
42S2
-
42T
-
42C
-
42
-
42
-
52S2
-
52T
-
52C
-
52
-
52
-
93
Specification
Block Diagram
TS Out
94
DMM-1710PM series
DVB Tuner to Analog Trans-modulator
DMM-1710PM is a high performance Digital to analog trans-modulator. With 2 independent
built-in decoders, it can decode 2 DVB programs from a tuner port and 2 IP streams with
MPEG-2/H.264, HD/SD definition, then trans-modulate these 2 programs by built-in modulators
and output a combined signal via RF output port. It has 2 GbE TS/IP ethernet ports and can
receive 2 IP SPTS/MPTS streams received by each port. IP port2 is hard backup for IP port1
with automatic monitoring. With its full compliance to analog standards including PAL, NTSC
and SECAM, DMM-1701PM is an ideal deployment for digital to analog system.
Main features
•
•
•
•
•
•
•
•
•
•
•
•
Support MPEG-2/H.264 HD/SD TS decoding
Support various analog TV standards including PAL, SECAM and NTSC
Two adjacent analog channels output in range of 48~860Mhz
Support DVB/EBU Subtitle, Teletext, WSS
2 independent IP input with each port,up to 150Mbps for each IP
Support dual DVB-CI for multi-decryption, BISS-1, BISS-E descrambling
Out level 100dBuV per channel
Support SNMP V1/V2, IGMP V2, NTP(Network Time Protocol)
Remote control and supervision by SNMP and HTTP web, upgrade via FTP or USB
Accommodated in 4RU 19” chassis (DMM-1000MF) which supports up to 8 modules and
equipped with auto-backup Power Supply module.
Specification
DVB-S/S2 Input
Connector Type
Input Signal Level
Symbol Rate
Roll-off Factory
Forward Error Correction
LNB Control Voltage
LNB Tone Switch
DiSEqc
DVB-T Input
Connector Type
Input Signal Level
Tuner Bandwidth
Viterbi Error Correction
Guard Interval
FFT mode
DVB-C Input
Connector Type
1×F Type female, 75Ω(input)
1×F Type female, 75Ω(loop through
output)
950 ~ 2150MHz
-65 ~ -25dBm
DVB-S: 2~40MBauds/s for QPSK
DVB-S2: 2~40MBauds/s for QPSK,
8PSK
DVB-S: 0.35
DVB-S2: 0.2, 0.25, 0.35
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
0, 22KHz selectable
DiSEqc 1.0
1×FType female, 75Ω(loop through
output)
48MHz~861MHz
-65 ~ -25dBm
6MHz, 7MHz, 8MHz
2/1, 2/3, 4/3, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
2K, 8K
1×FType female, 75Ω(loop through
output)
Input Signal Level
Constellation
Symbol Rate
TS over IP
Connector Type
Useful bit rate
Protocol
RF Output
Connector Type
Carrier Output Level
Spurious Rejection
Output Return Loss
Video Modulation
Video modulation depth
Video in-band flatness
Differential Gain
Differential Phase
Video SN Ratio
Chrominance/Brightness
Delay Differential
K2T(2T Pulse K factor)
Video Carrier Frequency
Audio Modulation
Audio SN Ratio
Audio Pre-emphasis
Audio Frequency Response
Total Harmonic Distortion
51MHz~858MHz
40 ~ 85dBuV
16, 32, 64, 128, 256 QAM (ITU J.83
Anne×A)
1 ~ 7MBaud
2×RJ-45，10/100/1000M Base-T
300Mbps per port (150Mbps per IP ×2）
UDP/RTP, Multicast/Unicast ,IGMPv2
1×F Type female, 75Ω(primary output)
1×FType female, 75Ω(-20dB for monitoring)
48MHz agile, step by 10KHz
100±3dBuV
≥55dBc
10dB
0~18dB(adjustable)
85%~87.5%
≤2dB
≤7%
≤5°
≥45dB
≤45nS
≤4%
VHF: ± 5KHz, UHF: ± 10KHz
≥55dB
50μs(B/G, D/K, I), 75μs (M/N)
±1.5dB （40Hz~15KHz）
≤1.2%
95
Audio Modulation Deviation
Audio Carrier
Frequency(main)
Audio Carrier Frequency
(second, Only suitable to A2
Stereo trans-modulator)
Connector Type
40 ~ 100KHz peak to peak（D/K,B/G,I）
50KHz peak to peak (M/N)
6.5MHz ± 5KHz (D/K)
6.0MHz ± 5KHz (I)
5.5MHz ± 5KHz (B/G)
4.5MHz ± 5KHz (M/N)
6.742MHz ± 5KHz (D/K)
6.258MHz ± 5KHz (D/K, Poland)
5.742MHz ± 5KHz (B/G)
4.742MHz ± 5KHz (M/N)
Remote Control
Local Control
Software Upgrade
Physical parameter
Dimension
Weight
Power supply
1×RJ45, 100/1000 Base-T, for Web
Control
Power Consumption
Storage Temperature
Humidity
External Hand-held Programmer Unit
Quick upgrade via USB, or FTP loader
379.7mm *111.5mm *39mm
610g Net.
DC 3.3V/5V/12V, supplied by
DMM-1000MF chassis
20W (Max.)
0 ~ 45℃
-10 ~ 60℃
10 ~ 90%, Non-condensed
Block Diagram
Order Information
DMM-1710PM-xx
DVB-S2
Input type
Video Audio
PAL D/K
PAL D/K(Poland)
PAL B/G
MONO
02S2
12S2
NTSC
22S2
SECAM D/K
SECAM L
PAL-I
32S2
DVB-T
A2
MONO
04S2
02T
08S2
14S2
12T
DVB-C
A2
04T
08T
14T
22T
34S2
32T
MONO
02C
12C
A2
04C
08C
14C
22C
34T
32C
42S2
42T
42C
52S2
52T
52C
34C
96
DMM-1701LD
8-Way Active Satellite Signal Splitter
DMM-1701LD is an 8-Way active L-band satellite signal splitter. The RF input port can be fed with
13/18V and 0/22KHz to drive the LNB and antenna. By using micro strip line technology, the portto-port isolation between 8 RF outputs is higher than 40dB. It is a useful and cost effective spare
part for satellite professional IRD product line.
Main Feature
• Used with professional satellite receiver and decoder modules in DMM product line
• Isolated DC between input and output based on micro strip directional coupler
• Active splitter to keep good RF output level
• High isolation between 8 RF output ports
• Loop output of RF input on front panel for supervision
• Manual LNB 13/18V, 0/22kHz switches with LED status
Specification
RF Input
Input Number
Connector type
Frequency range
Input level
LNB Control
13/18V
0/22KHz
Load current
RF Output
Output Number
Connector type
Gain
Return loss
Flatness
Isolation
Switch
1
Type F, 75Ω
950MHz - 2150MHz
-65 ~ -25dBm
LED
13±1V, 18±1.5V
0.7±0.1Vpp, 22±1KHz
350mA
Physical
Dimension
Power consumption
Operation temperature
Storage temperature
8 outputs, 1 loop output
Type F, 75Ω
0±2dB
≥10dB
±2dB
≥40dB
3 switches for LNB power ON/OFF, 13V/18V
and 0/22KHz
6 LEDs for Power, LNB Power, 13V, 18V,
0kHz, 22kHz
379.7×111.5×39 mm
10W Max
0~45ºC
-10~50ºC
Block Diagram
97
DMM-1701CA
High Linear Combiner and Amplifier Module
The DMM-1701CA is a high linear combiner and amplifier module which can combine 7 RF inputs
into 1 RF output and amplify output level up to 110dBμV per channel. Modular design make it very
easy for installation and maintenance. User can adjust gain manually and monitor output RF signal
via -30dB monitor port. DMM-1701CA is suitable for both analog and digital system.
Main Feature
• Manual adjusted gain amplifier
• Support -30dB monitor port
• Support 7 RF input into 1 RF output
• Modularized design for easy installation and maintenance
Specification
Connector Type
Frequency Range
Input Level
Output Level
Input Return Loss
Output Return Loss
CTB
XMOD
CSO
Noise factor
Passband Flatness
Isolation between Input
Ports
Isolation between Input
and Output Ports
7 x F type female 75Ω for Input, 1 x F type female 75Ω for
output,1 x F type female 75Ω for -30dB monitor
48～860MHz
100dBμV(per channel)
110dBμV(per channel)
≥7dB
≥12dB
112CH analog, flat, Vo=44dBmV TYP: -62dBc Max.: -60dBc
MAX：6dB
MIN：0.5 dB MAX：2.5 dB
TYP：20dB
MIN：16.5dB
MIN：27dB
Block Diagram
98
CATV Modulator Bank
SMA-1600 TV Modulator Bank consists
of 16 modularized professional adjacent
fixed-channel or agile adjustable
modulators in a 19” x 4RU chassis,
with 105dBμV output power level per
channel (117dBμV in total) and spurious
rejection greater than 60dB. SMA1600 is applicable for CATV network
where analog TV signal’s frequency
ranges from 47 to 862 MHz. Final RF
output level, individual channel RF
level, audio FM modulation deviation,
Main Feature
video AM modulation index and A/V
• High density with 16 channels in 1 rack of
ratio are adjustable. SMA-1600 has a
serials modules including SMA-1600M
for fixed-channel, SMA-1600MUV for
agile frequency and SMA-1600EM
19”4U
• output power level 117dBμV in total
• spurious rejection greater than 60dB
• Modulator options for fixed-channel or agile
frequency
• Hot-swappable redundant power
supply(Optional)
• Support PAL D/K, PAL B/G, NTSC system
• Easy to setup
for encoding plus modulation. These
modules can help you to setup a CATV
headend easily.
High density with 16
channels in 1 rack
Integrated RF combiner and
amplifier
Product List
Product name
Redundant power supply
CATV Modulator Bank
SMA-1600
Model No.
Description
SMA-1600MF
116-channels main frame
SMA-1600M-PAL B/G
Fixed-channel PAL-B/G Modulator
SMA-1600M-PAL D/K
Fixed-channel PAL-D/K Modulator
SMA-1600M-NTSC
Fixed-channel NTSC Modulator
SMA-1600MUV-PAL B/G
Agile frequency PAL-B/G Modulator
SMA-1600MUV-PAL D/K
Agile frequency PAL-D/K Modulator
SMA-1600MUV-NTSC
Agile frequency NTSC Modulator
SMA-1600EM
Integrated Encoder and Modulator
DMM-1000CU
Programmer Unit
99
CATV Modulator Bank
SMA-1600
CATV Modulator Bank
16-channels Main Frame
SMA-1600MF
Specification
Output Frequency
Range
RF Output Level
Relative Humidity
Power Supply
Dimension
Net Weight
47MHz~862MHz （PAL-B/G）
48MHz~862MHz (PAL D/K)
54MHz~804MHz （NTSC）
105 dBμV (per channel)，117dBμV in total
0￣45°C
≤90%(non-condensed)
180ACV to 260ACV,50Hz±2Hz, 80 Watt Max.
(16 modules equipped)
483mm×195mm×176mm
~13Kg（16 modules equipped）
Modulator Modules
SMA-1600M（Fixed-channel）
SMA-1600MUV（Agile frequency）
Specification
Specification
Channel Bandwidth
RF Output Level
Output Level Adjust Range
Video/Audio Carrier Power Ratio
Spurious Rejection
RF Output Return Loss
Carrier Frequency Accuracy
Video Modulation Depth
Output Impedance
Differential Gain
Differential Phase
C/L Delay △ τ
Video Flatness
Video S/N Ratio
Audio Frequency
Audio Pre-emphasis
Audio Modulation Deviation
Audio Flatness
Audio Harmonic Distortion
Audio S/N Ratio
Relative Humidity
Power Supply
Dimension
Net Weight
Parameters
47MHz~862MHz （PAL B/G）
48MHz~862MHz (PAL D/K)
54MHz~804MHz （NTSC）
7MHz & 8MHz （PAL B/G）
8MHz （PAL D/K）
6MHz（NTSC）
105 dBμV (per channel)
0 ~ -20dB (Continuously adjustable)
10~20dB (Continuously adjustable)
SMA-1600M: ≥60dB
SMA-1600MUV: ≥57dB
≥12dB (VHF); ≥10dB (UHF)
VHF —△ f — ≤5 KHz
UHF —△ f — ≤10 KHz
87.5% @Video input level 1Vp-p
75Ω
5% Max. @ 87.5% Modulation depth
5°Max.
—△ τ — ≤45ns
≤2dB
50dB min. (single module)
5.5MHz±2KHz (PAL B/G)
6.5MHz±2KHz (PAL D/K)
4.5MHz±2KHz (NTSC)
50μs(PAL B/G、PAL D/K)
75μs(NTSC)
±50KHz @ Audio input level is 0dBm±6dB
±1.5dB
≤1%
58dB min. (single module)
0 ～ 45°C
≤90%(non-condensed)
SMA-1600M: +5DCV±5%, ~ 2.5 Watt Max.
SMA-1600MUV: +5DCV±5%, ~ 3 Watt Max.
159mm×134mm×25mm
~100g
100
CATV Modulator Bank
Integrated Encoder and Modulator
SMA-1600EM
SMA-1600EM is an integrated base band TV signals to DVB-T/C digital RF TV signal conversion unit (Analog_to_Digital and RF output).
Any signal from its AV and HDMI inputs can be encoded, multiplexed and modulated onto one DVB-T/C RF carrier. The RF output signal
could be easily mixed into the exist CATV or HFC network without disturbing the exist signals nor re-build the co-axial cabling network.
Multiple STB’s (Set Top Box) or integraged TV’s can receive the clear & clean digitized TV signal simultaneously, and no professional
reception equipment is needed. Transmission range over co-axial cable could be longer than 100m without degrade of signal quality, and
could be more than 1000m with appropriate external amplifier.
SMA-1600EM is suitable for private video distribution, community surveillance network, campus conference, factory on-site monitoring, etc.
Main Feature
• Compile with H.264/AVC BLP, MP, HP @ L4.0 or lower level, MPEG-2 MP@ML
• Compile with DVB-T and DVB-C standard
• Video input from HDMI and CVBS
• Supporting NTSC, PAL and SECAM video system
• PAT, PMT, NIT, SDT, LCN generated automatically
• LCD Display and front panel operation, supporting DMM-1000CU programmer unit
• Quickly setup in 30 seconds by selecting channel number directly
• Anti-conflict for TS ID, PID, Service name, LCN
• Supporting IR remote (for specified model)
• Output frequency range for RF from 100MHz to 860MHz
• Easy to setup and maintain
Product List
Functions and interfaces
1600EM-T
DVB-T COFDM Modulation
DVB-C QAM Modulation
CVBS Input
HDMI Input
H.264 HD Encoding
H.264 SD Encoding
MPEG2 SD Encoding
Programmer Unit supported
●
1600EM-C
●
●
●
●
●
●
●
●
●
●
●
●
●
101
CATV Modulator Bank
Specification
Interfaces
CVBS, Audio_L/Audio _R, 3.5mm
phonejack type
HDMI 1.4 (SD or HD)(HDCP)
F-type female, 75Ω
AV Input
HDMI Input
RF Output
Video Encoding
Video System
Encoding Standard
Video Resolution and
recommended bitrate
(H.264)
Video Resolution and
recommended bitrate
(MPEG-2)
Aspect Ratio
Audio Encoding
Audio Input
Encoding Standard
Sampling Rate
Audio bitrate
TS Processing
PSI/SI
DVB-T COFDM Modulation
NTSC, PAL and SECAM
H.264/AVC BLP, MP, HP @ L4.0 or less,
MPEG-2 MP@ML
500K~13Mbps
1080i(1920×1080)@25Hz,29.97Hz,30Hz
SMPTE274M: 1.5~11Mb/s
720p（1280×720）@25Hz,29.97Hz,30Hz
SMPTE296M: 1.5~11Mb/s
480i（720×480）@29.97Hz SMPTE656M:
500K~6Mb/s
576i（720×576）@25Hz SMPTE656M:
500K~6Mb/s
480i（720×480）@29.97Hz SMPTE656M:
3.5~6Mb/s
576i（720×576）@25Hz SMPTE656M:
3.5~6Mb/s
4:3/16:9 selectable
HDMI or L/R Stereo
MPEG-1 Layer II
48 KHz
MPEG1 Layer II :128Kbps (Stereo)
PAT, PMT, NIT, SDT, LCN generated
automatically
Constellation
Bandwidth
FFT mode
Guard Interval
Code Rate
MER
DVB-T RF Output
RF Output Level
Spurious Rejection
Return Loss
DVB-C QAM Modulation
Standard
Constellation
Bandwidth
Symbol Rate
Roll-off factor
MER
DVB-C RF Output
RF Output Level
Return Loss
Spurious Rejection
Flatness
Phisical
Dimmention
Net Weight
Power Supply
Storage Temperature
Relative Humidity
QPSK/16QAM/64QAM
6MHz, 7MHz, 8MHz
2K, 8K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
>38dB
100~860MHz， step by 10KHz
92dB
50dBc (typ.)
10dB (typ.)
DVB-C EN300429
16QAM/32QAM/64QAM/128QAM/256QAM
6MHz, 7MHz, 8MHz
3.6MBaud~7MBaud
0.15
MER >36dB（ with Tester Equalizer = off）
49~1000 MHz
92dB
10dB
50dBc (typical.)
4dB（Full frequency range）
159mm×134mm×25mm
~100g
+5DCV±5%, ~ 8Watt Max.
0~45℃
-10~60℃
102
DHC-3601
DVB-C STB
DHC-3601 is a Digital Cable HDTV Receiver. It's the best solution to enjoy
HDTV program!
DHC-3601 can convert all DVB HD format programs to SD output or HD
output simultaneously. DHC-3601 supports parental control, and OSD
Teletext.
Affordable price, user- friendly interface, great reception, and easy
installation, DHC-3601 is no doubt the best choice to experience high
resolution, high quality video, and surround audio!
Main Feature
• Compliant with Digital Cable TV standard
• DVB-C Tuner from 42-1002MHz,bandwidth 6/8MHz
• Symbol Rate 1~7M bauds
• Video MPEG2/H.264 SD and HD decoding up to 1080p
• Audio MPEG1 Layer II, AAC and HE-AAC decoding
• Analog and Digital Outputs, CVBS, YPbPr, HDMI,S/PDIF
• Automatic and Manual channel search
• Up to 2000 channels processing
• Support EPG of 7 days
• Embedded Topreal CAS
• Software update through USB port or on Air
Specification
DVB-C
Tuner input
Demodulation
Bandwidth
Frequency range
DVB-C
1*F type female for Input
1*F type female for loop through output
16/32/64/128/256QAM
6/8MHz(IF filter 6,7,8 MHz)
42~1002MHz
Input impedance
75Ohm
Input level
Symbol rate
System
OS
-15~+15 dBuV
1~7Mbaud with step of 1kBauds
Tuner input type
CPU
SPI Flash
DDR RAM
Video
Standards
Frame Frequency
Resolution
Bit Rate
Aspect Ratio
Audio
Standard
Linux
M3601E,Dual-core
Main system:1500MIPs
4MB
128MB
MPEG-2 MP@ML for SD
MPEG-2 MP@HL FOR HD
H.264/AVC MP@L3.0 for SD,HP@L4.1 for
HD VC-1 AP@L1 for SD,AP@L3 for HD
25/50Hz
Up to 1920*1080p(60Hz)
MPEG-2 MP@ML: 2–15 M bps
MPEG-2 MP@HL: <19 M bps
MPEG-4 AVC HP@L3:<10 M bps
MPEG-4 AVC HP@L4: <20 M bps
4:3 and 16:9
MPEG 1 Layers 1, 2 (mono, dual channel,
and stereo);
MPEG-2 AAC-LC & MPEG4 HE-AAC
Sampling Rate
Audio Output
Front Panel
IR
Keys
LED
Smart Card
Interface
Video Output
Audio Output
USB
HDMI
S/PDIF (Digital Audio
Port)
DC Input
Conditional Access
CA Vendor
CA type
Others
Power Supply
Power Consumption
Temperature
Humidity
Weight
STB Dimension
Gift Box Dimension
Accessories
Shipment Information
32,44.1,48KHz
mono, dual mono, stereo, joint stereo
IR
MENU/OK/VOL+/VOL-/CH+/CH-,Power ON/
OFF
Power indicate*1, Signal Lock*1
Reader compliant to ISO
CVBS RCA Jack81, YPbPr RCA Jack*1
1 pairs of RCA stereo(Audio Left/Audio
Right)
USB2.0*1
HDMI*1, HDCP 1.3
Coaxial RCA type
12V/1.5A
Topreal
Smart card less or Smart card
100~240VAC 50/60 Hz
Stand By <1W
Working mode < 8W
Max 12W
Work Temperature: 5~45ºC
Storage Temperature: -10~65ºC
20~90%,non-condensed
910g with gift box
200mm ×152mm ×40mm
318mm ×238mm ×62mm
Remote Control, Battery, RF adapter, AV
Cable, HDMI Cable in option
3880 units per 20’ Container
103
STBs
ProBox-F975 ProBox
STBs
DVB+OTT+CloudTV Dual Core Multi-Tuner Hybrid STB
F975FSC is an advanced Digital Home Media STB. Based on Android 4.4 OS and Cloud Peer-to-Peer technology, it can receive LiveTV, VOD and
internet radio services. With multi-tuner and FSC(Full Spectrum Capture) design, it supports seamless programs switching, watching A and recording
B at same time and Picture-in-Picture functions. The special SDvIP (super distribution via IP) can share the content to other equipments, like phones,
pads, etc.
F975FSC is embedded a ProBrain cloud system platform (including CMBS, CMS, OTT, LiveTV(P2S), VOD(P2V), Tracker, ProAD, ProANA, ProAPK,
ProVote, ProPVR, etc), which is specially customized for operators. Based on open source Android system, it’s easy to develop or install any other
OTT apps(such as Cloud-Kara OK, games, on-line shopping etc). With a unique digital identifier, the box and contents is protected from illegal copy
or using. Based on Airplay, Miracast, DLNA DMP(Digital Media Player) technology, F975FSC supports P-Link multi-screen sharing via WiFi.
F975FSC supports ProANA (Analytics of User Behavior in TV watching, one of the ProBrain iCloud utilities) which is developed to help broadcasters
to measure television and other digital media audiences through a real-time and accurate survey, and analyze all survey data to generate a
readable report. The ProANA is an automatic running program in background of F975FSC that will not affect user experience in watching a live
program. It’s able to track on the current playing channel that may come from cable TV and internet TV and sends the relevant information back to
the survey server for further analysis. It can store analytics data for one year or longer time for data analysis, searching or other usages. ProANA
helps broadcasters and advertisers to plan more accurate and customer-oriented marketing strategy. Based on this ProANA function, ProAD helps
broadcasters and advertisers to plan more accurate advertisement. ProVote system makes the user and broadcaster communicate in realtime, and
helps broadcaster to get more feedback to improve the user experience.
In additional, broadcasters can build a private app market and manage all the APKs. IN such way users can download and install all the APK from the
market, watch new TV series and movies, listen to global radios, read global news etc. These powerful functions make the F975FSC good enough for
the extending applications.
Main Feature
• Comply with DVB-C standards and major internet standards.
• Support dual DVB-C tuners which can play and record TV programs at the same time.
• Support SDvIP(super distribution Via IP)
• Support seamless switch between DVB, OTT and Internet video
• Support SD/HD contents from both DVB-C cable network and internet
• Support full DVB-C RF frequency range scan or specific frequency scan
• Support ProBrain PUDRM High Security CAS and Standard Security smart card CAS which can simucrypt with current DVB TV system like Topreal,
CTi, Enigma,etc.
• Support 1080P decoding to HDMI
• Support PPPoE, DHCP and Static IP protocol
• Base on Android OS and Peer-to-Peer(P2P) technology
• Support PDRM to protect copyright and avoid illegal copy or pirate.
• Supports ProANA (Analytics of User Behavior in TV watching, one of the ProBrain iCloud utilities), ProAD, ProAPK, ProVote, ProPVR functions
• Support P-Link to share multimedia contents in network
• User can share contents among Android or iOs based TVs, pads, smart phones, STBs, etc.
• User can share text, picture, video, music, voice with friends via P-Chat application
• Software upgrade via USB or online
104
Specification
Video Decoding Format
Video Output Format
Video Resolution
Audio Decoding Format
Audio Mode
Audio Sampling Rate
Photo Format
IP Protocol
Network
DVB-C
16/32/64/128/256QAM
47~999MHz
6MHz,8MHz
75Ohm
-15 to 15dBm
IEC type
3.6~6.952Mbaud
Andriod 4.4.x
Dual Core 1.5G
4GByte
1GByte
MPEG-1,MPEG-2,MPEG-4,DivX3.11~6.
x,AVC,H.264,VC-1,AVC,AVS,SVC,MVC,FLV
PAL/NTSC/SECAM
1920*1080p(60Hz),1920*1080i(50Hz),1280*
720p(50Hz),720*480i(60Hz),720*480p
(60Hz)
AAC LC, MPEG-1 Layer1,2,3
Mono, Stereo
8KHz,16KHz,11.05kHz,24kHz,32kHz,
44.1kHz,48kHz
JPEG,PNG
TCP/IP, UDP, TFTP, FTP, HTTP
Access control
Front panel
LED
Control Button
DVB Smart Card slot
USB port
Rear panel
Analog audio output
ETHERNET port
USB port
HDMI port
Micro SD Card slot
IR Extender
WIFI module
DC power supply
Power switch
Others
Power supply
Temperature
Net Weight
Net Dimension
Accessories
PPPoE, DHCP, Static IP address configuration
7 segment Digital Display ,Power indicate,
Tuner lock status, LED display, IR
7 Keys(Power,Up,Down,Left,Right,Ok,
Menu,)
1
USB2.0*1
CVBS+Audio_L/Audio_R+SPDIF(coaxial)*1
RJ45(transfer device) 10/100M Base-T
USB2.0*2
HDMI*1
1
3.5mm
optional
12V/1.5A, <15W
1
175~265 VAC, 50/60 Hz, Max.20W
Work Temperature: 5~45 ºC
Storage Temperature: -25~75 ºC
2Kg
Remote controller*1, AA battery*1, HDMI
cable*1, RCA cable*1, Power adapter*1,
Warranty card*1, User manual*1
Application
105
STBs
RF Tuner
Constellation
Frequency range
Bandwidth
Input impedance
Input level
RF connector type
Symbol rate
System
OS
CPU
NAND Flash
DDR3
Video & Audio Decoding
STBs
ProBox-G966
G966 is an advanced Digital Home Multi-Media Internet Player based on Android 4.4 OS. With a quad-core A9 processor and up to 1.5GHz frequency,
3D image can be handled high efficiently and perfectly. Embedded H.265 hardware decoding engine would provide a better picture performance than
software decoding.
Main Feature
• Based on Android 4.4 OS
• Quad-core A9 processor, 1.5GHz Frequency, Quad-core GPU for 3D Processing
• Support H.265 hardware decoding
• Support 4K decoding
• Build-in Wifi 2.4G & Bluetooth 4.0
• Support P-Link Multi-screen remote control and contents sharing between different devices such as smart phones and pads by using Airplay，
Miracast，DLNA DMP( Digital Media Player) technology
• Supports ProANA (Analytics of User Behavior in TV watching, one of the ProBrain iCloud utilities), ProAD, ProAPK, ProVote functions
G966 ProBox
Specification
Application
CPU
OS
FLASH
DDR
Interface
HDMI
AV
SPDIF
Ethernet
USB Memory card
IR
WIFI
Bluetooth
DC input
Video/Audio Format
Video
Audio
resolution
Main Function
CAM / Monitor
Advertisement
online vote, online survey
Multiscreen
Control
OTT
Quad-core processor, 1.5GHz Frequency
Android 4.4
4GB
1GB
1.4b
Phonejack type
coaxial, Phonejack type
RJ45
2.0*1
Micro SD (TF)
Phonejack type
2.4G/11n , single antenna
Bluetooth 4.0
5V/3A, <15W
H.264、H.265、MPEG-1/2/4、WMV/VC-1、AVS、RealVideo 8/9/10、MKV、MPG、dat、AVI、MOV、ISO、MP4、RM
MP3、AAC、WMA、RM、FLAC、Ogg
up to 1080P
After connect with camera, G966 can be used as a videophone or monitor and controlled by smart phone or tablet
Customer-oriented advertisement including video, picture and texts which would be renew automatically
online vote or survey for different countries and regions
Support AirPlay，Miracast，DLNA for local media content sharing. Content from Phone and Pad would be displayed on TV
1. Remote controller
2. Wireless mouse
3. Wireless keyboard
4. P-Link interactive control( support both Android & iOS)
(1) smart control〈virtual controller,virtual touch board, virtual mouse〉
(3) Video / Audio share with Phone Pad
(4) Voice Control
(5) Kala OK（extra audio processor needed）
106
DVB-T2 Modulator
DTTV Modulator
Tenor-GAF2
Main Feature
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fully compliant with DVB-T2 standard
Support Mode A, Mode B and Multi-PLP
2xASI inputs, 1xGigabit Ethernet IP input, optional satellite input
Support 1k, 2k, 4k, 8k , 16k , 32k FFT modes
Guard Interval: 1/4, 1/8, 1/16, 1/32,1/128,19/128,19/256
Rotated constellation: 29°, 16.8°, 8.6°, Antan(1/ 16°)
FEC: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Constellation: QPSK, 16QAM, 64QAM, 256QAM
Support SFN-SISO-MISO and MFN
Channel Bandwidth: 5MHz, 6MHz, 7MHz, 8MHz
RF agile from 30MHz to 900MHz with step 1Hz
High performance RF feature with MER>40dB
External 1pps and 10MHz Clock inputs
Onboard GPS option
Powerful Linear and non linear correction
IP remote control and RS232 serial control
Specification
ASI Input
• Standard:Compliant with EN 50083 ASI interface standard
• Packet Length:188 or 204 packet, Packet mode and Burst mode
• TS Redundancy Mode:Manual or Auto, seamless in SFN mode
• Connector Type:BNC female, impedance 75Ohm
Satellite Input
• Standard:Compliant with DVB-S and DVB-S2 standard
• Frequency Range:950MHz to 2150MHz
• Sensitivity:-65dBm to -25dBm
• Connector Type:BIS- F connector, 75Ω
Ethernet stream Input
• Transceiver Type:Copper transceiver or optical transceiver
• Connector Type:
one RJ45 for 1000base-T, one SFP for Gigabit optical input
Stream Processing and Modulation
• Stream Input:Stream input redundancy management
• Network:MFN, SFN-SISO and SFN-MISO
• Modulation Mode:Mode A, Mode B and Multi-PLP
• FFT:1k,2k, 4k, 8k, Extended 8k, 16k, Extended 16k,32k,
Extended 32k
• FEC:1/2, 3/5, 2/3, 3/4, 4/5,5/6
• Guard Interval:1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256
• Constellation:QPSK,16QAM,64QAM,256QAM (normal or rotated)
• Time Interleaving:Adjustable Time Interleaving
Digital Pre-correction
• Pre-correction:Linear and non-linear pre-correction
• Spectrum tilt adjustment:+/-1dB, step 0.1dB
• Peak to Average Power Reduction(PAPR)
RF Output
• Central Frequency:30MHz to 900MHz
• Signal Level(Main):0dBm +/- 1dB with 0dB to -10dB attenuation
adjustable by 0.1dB step
• Output Level Stability:+/- 0.1dB/10ºC
• Modulation Error Ratio(MER):>40dB
• Shoulder:<-50dB @ +/-4.2MHz from central frequency
• Spurious:<-50dBc relative to total power
• Return Loss:>15dB
• Connector Type:N female, impedance 50 Ohm
Test Signal Modes
• Mode 1:PRBS TS sequence
• Mode 2:Sinus tone generation
• Mode 3:Spectrum Gap
• Mode 4:Null Symbol Insertion
Clock Reference
• Internal 10MHz:Stability:
0.5ppm(typ), Output level: 0dBm +/- 3dB
107
DTTV Modulator
• External 10MHz:Input level: -5dBm to +10dBm
Input connector type: SMA female, 50 Ohm
• External 1PPS Reference:
Input level: LVTTL and TTL level, Pulse width: 1us
Input connector type: SMA female, 5 KOhms;
Built-in GPS Receiver Option
• Locked Accuracy:+/-1 x 10-9
• Status Monitoring: Antenna status, GPS lock status, Satellite Number and
signal strength, YY/MM/DD and HH/MM/SS
Control and Alarm
• Remote Control:IP Ethernet RJ-45 or RS232
• Contact Relay:Major alarms
Physical Conditions
• Power Supply:AC 190V - 240V, 50/60Hz
• Power Consumption:100W max
• Operating Temperature:0 - +50ºC
• Dimension:44mm(Height)×483mm(Width)×500mm(Depth)
• Weight:Net 3.3 kg, Gross 5 kg
Non linear Pre-correction
Correction
Nb point
Abscissa range
Ordinate range
Step
AM/AM
16
-12 dB to +12dB
-6dB to +6dB
0.05dB
AM/PM
16
-12 dB to +12dB
-25° to +25°
0.05dB/0.2°
108
ISDB-T/TB Modulator
DTTV Modulator
Bossa-GAF
Main Feature
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fully Compliant with ISDB-T and ISDB-TB Standard
High MER, RF Stability, Shoulder Level and Low Phase Noise
Support 1k, 2k, 4k FFT Modes
Guard Interval: 1/4, 1/8, 1/16, 1/32
FEC: 1/2, 2/3, 3/4, 5/6, 7/8
Constellation: DQPSK, QPSK, 16QAM, 64QAM
MFN and SFN Network Operation (IIP Packets)
RF Agile from 50MHz to 860MHz with step 1Hz
Option IF Agile from 34MHz to 70MHz with step 1Hz
Powerful Linear and Non-linear Precorrection
Support Crest Factor Adjustment
External 1pps and 10MHz Clock Inputs
Optional Pre- Amplifier
Optional Onboard GPS
RS232 Control and Supervision or IP Web Browser in Option
Specification
TS Input
• Fully complaint with ARIB STB-B31 and TR-B14 standard
• 2 x ASI inputs
• Support 188/204 packet, Packet mode and Burst mode
• Input Transport Stream Packet de-multiplexer
• IIP packet management for SFN operating
• TS Redundancy: Manual/Auto, Seamless in SFN mode
• Connector type: BNC female, Impedance 75Ohm
Modulation and channel coding
• FFT: 1k ,2k, 4k
• FEC: 1/2, 2/3, 3/4, 5/6, 7/8
• Guard Interval: 1/4, 1/8, 1/16 or 1/32
• Constellation: DQPSK, QPSK, 16QAM, 64QAM
• Time interleave: 0 to 16
• Channel Bandwidth: 6MHz
IF Output Option
Central frequency: 34MHz to 70MHz, Step 1Hz
• Signal level(Main): 0dBm +/- 2dB with 0dB to
-10dB attenuation adjustable by 0.1dB step
• Modulation error ratio(MER): >42dB
• Shoulder: >55dB
• Spurious: 50dB relative to total power
• MFN and SFN network operation (IIP packets)
• Connector type: N female, Impedance 50 Ohm
Linear Pre-correction
• Number of Pre correction points: 32
• Amplitude pre correction: +/-3dB
• Phase pre correction: +/-1us
Adjustable Crest Factor
• The range of Crest Factor: 8-20dB
• The crest factor optimization: 1-255
RF Output:
• Central frequency: 50MHz to 860MHz
• Signal level(Main): 0dBm +/- 2dB with 0dB to
-10dB attenuation adjustable by 0.1dB step
• Signal stability: +/- 0.5dB,+/-10kHz
• Modulation error ratio(MER): >40dB
• Shoulder: >50dB
• Spurious: 50dB relative to total power
• Connector type: N female, Impedance 50 Ohm
RF Pre-Amplifier Option
• Ultra linear amplifier for VHF, UHF Bands
• Gain: 15dB
• Gain Flatness <1dB, Gain Stability <0.1dB
Test Signal Modes
• PRBS TS Sequence
• Sinus tone insertion
• Null Symbol Insertion
• Central Carrier Cancelled
ISDB-T/TB Network
• SFN: Time offset setting
• MFN: BR adaptation, Static delay setting
Clock Reference
• Internal 10MHz
109
DTTV Modulator
Stability: <+/-5×10-9(typ), Output level: 0dBm +/- 3dB
• External 10MHz
Input level: -7dBm to +2dBm
Input connector type: BNC female, 50 Ohm
• External 1pps reference
Input level: TTL level 5 KOhms; Pulse width: 1us
Input connector type: BNC female
• Optional onboard GPS
Control and Alarm
• Local control: 6 buttons, LCD screen, LED
• Remote control: RS232 or WEB browser through IP Ethernet RJ-45
in option
Phyical
• Power supply: AC 110V+/-15% or 220V+/-10%, 80W
• Operating temperature: 0 to 50 degrees
• Dimension: L=540mm,W=483mm, H=44mm (1RU)
• Weight: Net 7 kg, Gross 10 kg
Non linear Pre-correction:
Correction
Nb point
Abscissa range
Ordinate range
Step
AM/AM
16
-12 dB to +12dB
-6dB to +6dB
0.05dB
AM/PM
16
-12 dB to +12dB
-25° to +25°
0.05dB/0.2°
110
Model: Symphony-130W
Symphony-130W is Digital Horizon’s most amazing achievement, as it combines a complete transmitter with output power up to 130W rms and
multiple input interfaces in a single 1U 19” rack chassis. This astonishing engineering is today a unique and unequaled solution in the market.
Supporting DVB-T/H, DVB-T2, ISDB-T/Tb, DAB/DAB+/T-DMB, PAL and NTSC modulations (dual-cast Analog and Digital is also supported),
Symphony-130W natively offers adaptive pre-correction circuits and built in GPS receiver for accurate synchronization and SFN operations.
Whether you need a Terrestrial or Satellite fed transmitter, an on channel repeater, a re-transmitter or even a transposer, then Symphony-130W is
the required solution as it can be equipped and configured with different input interfaces (Satellite Receiver, ASI, Gigabit Ethernet, or RF).
For the South American ISDB-Tb market, Symphony-130W is today the only solution in the market combining Satellite Receiver, Re-Multiplexer /
BTS Adapter and up to 130W Transmitter in a single box 1U 19” rack!
Main Feature
• Compact 1U 19” Rack chassis
• Output Power up to 130W rms
• High efficiency wideband amplifier technology
• DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB modulations fully supported
• Embedded Re-Multiplexer/BTS Adapter and Layer Combiner for ISDB-Tb
• Adaptive pre-correction circuits
• Powerful echo canceller when Symphony-130W is used as an on-channel repeater
• On-board high stability GPS receiver with battery
• Flexible input interfaces:
▲1 x DVB-S/S2 Satellite Receiver input
▲4 x ASI inputs (TS, BTS, T2MI) + Analog input
▲2 x ASI inputs and 2 x Gigabit Ethernet
▲1 x RF input
• SNMP, Web Interface and Touch Screen display
Specification
TRANSMITTERS
Digital output Power
Analogue output power
Frequency agility
Frequency resolution
Pre-Correction
RF Connector
MODULATOR
DVB-T/-H/-T2
Standard
Inputs
FFT
Code Rate
Guard Interval
Constellation
MISO Processing
ISDB-Tb
Standard
20W, 50W, 80W and 130W rms@ MER>36 dB
50W, 100W, 220W p.s.
UHF Band IV and V or VHF Band III
1 Hz
Adaptive
N(f), 50 Ohm
EN300744, EN302304, EN302755, TS101191,
TS102773 (T2-MI), TS102034
4x ASI BNC (f), 75 Ohm or 2x ASI BNC (f), 75
Ohm and 2x RJ45 TSoIP 10/100/1000
Switch seamless between ASI inputs
Hierarchical and not hierarchical (DVB-T)
1K (DVB-T2), 2K, 4K, 8K, 8K ext. (DVB-T2),
16K & 16K ext. (DVB-T2), 32K & 32K ext.
(DVB-T2)
All modalities available according to the
standard
Block Short or Normal (DVB-T2)
DVB-T: Reed-Solomon (204, 188)
DVB-T2: BCH, LDPC
1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128
(DVB-T2), 1/128 (DVB-T2)
QPSK, 16QAM, 64QAM, 256QAM (DVB-T2).
Rotated and non rotated (DVB-T2)
Supported
ABNT NBR 15601, ABNT NBR 15603
Inputs
FFT
Code rate
Guard Interval
Hierarchical Modulation
Constellation
Time interleaver
Partial reception
DAB/DAB+/T-DMB
Standard
Inputs
Transmission Modes
Operation
Analogue
Standard
Inputs
Color system
Satellite Receiver (Option)
Standard
DVB-S2
4x ASI TS/BTS BNC (f),
75 Ohm or 2x ASI TS/BTS BNC (f), 75 Ohm
and 2x RJ45 TS/BTS oIP 10/100/1000
Mode 1 (2K), Mode 2 (4K), Mode 3 (8K)
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
Up to 3 layers
QPSK, 16QAM, 64QAM
Fully supported
Supported
EN 300401, ETS 300 799
4x ETI (NI[G703], NA5376[G704] or
NA5592[G704]) BNC (f), 75 Ohm
Mode I, II, III, IV (Automatically detected from
the ETI stream, or user selectable)
MFN or SFN operations
B, G, D, K, M, N, I
Video BNC (f), 75 Ohm, audio Tini-QG “Mini
XLR”, 6 Pin (m), 600 Ohm
PAL, NTSC
ETSI EN 300 421 (QPSK) (DVB-S)
ETSI EN 302 307 (QPSK, 8PSK, 16APSK)
(DVB-S2)
ETSI EN 50083-9 (ASI)
ETSI EN 50221 (Common Interface)
VCM, CCM, Multi Stream and Single Stream,
Normal & Short FEC frames
111
DTTV Transmitter
Digital TV Transmitter
Symbol Rate
DTTV Transmitter
Constellation
FEC
Roll–Off
Input connector
Frequency
LNB control voltage
RF input level
Output connector
Modality
Max input bit rate
CAM interface
CA mode
(Conditional Access)
CAS support
REPEATER/GAP FILLER
RF Input
Signal type
Frequency range
Sensitivity
Selectivity
NF (Pi=-50 dBm)
Conversion type
Return losses
Connector
Echo Canceller
1 - 45 Msym/s (DVB-S)
2 - 45 Msym/s (DVB-S2)
QPSK, 8PSK, 16APSK
Automatic, all modalities available according to
the standard Block Short or Normal
DVB-S: Reed-Solomon (204,188)
DVB-S2: BCH, LDPC
0.2, 0.25, 0.35
F (f), 75 Ohm
L–band 930~2250 MHz
Off, +13/18 Vdc, 22 kHz, 0.25 A (overload
protection)
40~100 db/μV (with attenuator)
BNC (f), 75 Ohm
188bytes
80Mbps (CAM limit: 72 Mbps)
PCMCIA DVB-CI Common Interface
Multicrypt, Simulcrypt
M e d i a g u a r d , Vi a c c e s s , I r d e t o , C o n a x ,
BISS with Professional multiprogram CAM
(descrambling of up to 24 Elementary
Streams) Betacrypt, Cryptoworks, Nagravision
with standard consumer CAM (descrambling of
up to 4 services)
One DTV channel (DVB-T/H/T2, ISDB-T/Tb,
ATSC)
170~862 MHz (agile tuning)
-75~ -15 dBm
> 60dB ± 4.2 MHz
< 6dB
Direct Base Band Conversion (Zero IF)
> 15dB
N (f), 50Ohm
Cancellation level
Cancellation window
Doppler cancellation
Maximum echo level
Total delay
GPS (Option)
Input connector
Input/Monitor output 10
MHz
Input/Monitor output
PPS
Phase noise
Stability
Hold-over stability
MECHANICAL
Chassis
Width
Height
Depth
Weight
CONTROLS
Controls
ENVIRONMENTAL
Range
Max. relative Humidity
Max. operating altitude
ELECTRICAL
Power Supply
Maximum consumption
40dB, typical
20μsec
yes
+15dBc (over the main signal), typical
< 10μsec
N (f), 50Ohm
BNC (f), 75Ohm
BNC (f), 75Ohm
-140dBc/Hz @ 10kHz, -150dBc/Hz @ 100kHz
1e-12 / 24 H with disciplined OCXO
5 μs after 5 hours (optional 1 μs after 24 hours)
1U rack 19”
482 mm
43.6 mm
460.5 mm without fans
7.5 Kg
TFT touchscreen
Web GUI
SNMP
GPIO
-5°C~40°C
90% non condensing
2500 m. a,s,l, (>2500 m. optional)d
Single Phase 100~240 V~50/60 Hz, IEC320
C14 Plug
196 W @ 20 W rms (Symphony-20W)
470 W @ 130 W rms (Symphony-130W )
Ordering Information
Model
Symphony-20W UD
Symphony-50W UD
Symphony-80W UD
Symphony-130W UD
Symphony-20W UI
Symphony-50W UI
Symphony-80W UI
Symphony-130W UI
Opt. G
Opt. KA
Opt. S
Opt. R
Opt. T2
Opt. L
Opt. P
Opt. N
Description
20 W rms UHF DVB-T2/T/H Digital TV transmitter, 1RU
20 W rms UHF ISDB-T/Tb Digital TV transmitter, 1RU
Options
GPS receiver plug-in board
26 dB LNA GPS antenna kit including mounting kit and 25 mt. coaxial cable
DVB-S/S2 receiver board, single and multistream, with integrated CAM
DVB-T receiver plug-in board
Software upgrade for DVB-T2 modulation
Software upgrade for ISDB-Tb Remux/BTS adapter and Layer Combiner
Dual-cast option for analogue modulation (PAL)
Dual-cast option for analogue modulation (NTSC or PAL-M)
Symphony-130W back panel
Symphony-130W back panel + GPS
112
DTTV Transmitter
Symphony-400W is an all-in-one transmitter, fully supporting DVB-T/H, DVB-T2, ISDB-T/Tb, DAB/ DAB+/T-DMB, PAL and NTSC modulations
(dual-cast Analog and Digital is also supported), able to provide an output power up to 400W rms.
Symphony-400W comes as an ultra compact chassis available in 2U 19” rack (single power supply) or 3U 19” rack (double redundant power
supply), with adaptive pre-correction circuits natively offered, and built in GPS receiver for accurate synchronization and SFN operations.
Different input interfaces can be configured (Satellite Receiver, ASI, Gigabit Ethernet, or RF), which makes Symphony-400W the perfect flexible
platform to cover the different applications of any Digital TV network (terrestrial or satellite fed transmitter, re-transmitter, on channel repeater,
transposer, etc.).
For the South American ISDB-Tb market, Symphony-400W is today the only solution in the market combining Satellite Receiver, Re-Multiplexer/
BTS Adapter and Transmitter in a single box.
Main Feature
• Compact 2U 19” Rack chassis or 3U 19” Rack chassis
• Output Power up to 400W rms in digital and up to 1200W p.s. in analogue
• Powerful echo canceller when Symphony-400W is used as an on-channel repeater
▲1 x DVB-S/S2 Satellite Receiver input
▲1 x RF input
• SNMP, Web Interface and Touch Screen display
Specification
TRANSMITTERS
Digital Output Power
Analogue Output Power
Frequency agility
Pre-correction
RF Connector
MODULATOR
DVB-T/-H/-T2
Standard
Inputs
FFT
Up to 400W rms @ MER > 36dB
Up to 600W p.s.(version H), up to 1200W
p.s.(version R)
UHF Band IV and V(470-809MHz), or VHF
Band III
1Hz
Adaptive
7/16(f), 50 Ohm
EN300744, EN302304, EN302755, TS101191,
TS102773 (T2-MI), TS102034
Switch seamless between ASI inputs.
16K & 16K ext. (DVB-T2), 32K & 32K ext.
(DVB-T2)
Code Rate
Guard Interval
Constellation
MISO Processing
ISDB-Tb
Standard
Inputs
FFT
Code rate
Guard Interval
Constellation
standard
DVB-T2: BCH, LDPC
1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128
(DVB-T2), 1/128 (DVB-T2)
Supported
4x ASI TS/BTS BNC (f),
75 Ohm or 2x ASI TS/BTS BNC (f), 75 Ohm
and 2x RJ45 TS/BTSoIP 10/100/1000
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
Up to 3 layers
QPSK, 16QAM, 64QAM
113
DTTV Transmitter
Time interleaver
Partial reception
DAB/DAB+/T-DMB
Standard
Inputs
Transmission Modes
Operation
Analogue
Standard
CA mode
Fully supported
Supported
EN 300401, ETS 300 799
4x ETI (NI[G703], NA5376[G704] or
NA5592[G704]) BNC (f), 75 Ohm
Mode I, II, III, IV(Automatically detected from
B, G, D, K, M, N, I
Inputs
Color system
PAL, NTSC
SATELLITE RECEIVER (Option)
Standard
(DVB-S2)
DVB-S2
1 - 45 Msym/s (DVB-S)
Symbol Rate
2 - 45 Msym/s (DVB-S2)
QPSK, 8PSK, 16APSK
Constellation
Automatic, all modalities available according to
the standard
FEC
Block Short or Normal
DVB-S2: BCH, LDPC
Roll–Off
0.2, 0.25, 0.35
Input connector
F (f), 75 Ohm
Frequency
LNB control voltage
protection)
RF input level
40~100 db/μV (with attenuator)
Output connector
BNC (f), 75 Ohm
Modality
188 bytes
Max input bit rate
80 Mbps (CAM limit: 72 Mbps)
CAM interface
CAS support
GPS(Option)
Input connector
MHz
PPS
Phase noise
Stability
Hold-over stability
MECHANICAL
Chassis
Width
Height
Depth
Weight
CONTROLS
Controls
ENVIRONMENTAL
Range
ELECTRICAL
Power Supply
Average consumption
with standard consumer CAM (descrambling
of up to 4 services)
N (f), 50Ohm
BNC (f), 75Ohm
BNC (f), 75Ohm
-140 dBc/Hz @ 10 kHz
-150 dBc/Hz @ 100 kHz
5μs after 5 hours (optional 1μs after 24 hours)
2U rack 19” (Symphony-400W H)
3U rack 19” (Symphony-400W R)
482 mm
87.1 mm (Symphony-400W H)
130.8 mm (Symphony-400W R)
14 Kg (Symphony-400W H)
21 Kg (Symphony-400W R)
TFT touchscreen
Web GUI
SNMP
GPIO
-5°C~40°C
90% non condensing
2500 m. a.s.l. (>2500 m. optional)
Single Phase 100~240 V ~ 50/60 Hz, IEC320
C20 Plug
Up to 40% efficiency in digital
Model
Symphony-400W HUD
Symphony-400W RUD
Symphony-400W HUI
Symphony-400W RUI
Description
UHF DVB-T2/T/H Digital TV transmitter, 2RU, single power supply unit
UHF DVB-T2/T/H Digital TV transmitter, 3RU, double power supply unit
UHF ISDB-T/Tb Digital TV transmitter, 2RU, single power supply unit
UHF ISDB-T/Tb Digital TV transmitter, 3RU, double power supply unit
Symphony-400W H back panel
Symphony-400W H + GPS back panel
Symphony-400W R back panel
Symphony-400W R + GPS back panel
114
DTTV Transmitter
Symphony-900W is the most outstanding last engineering achievement from Digital Horizon.
In a compact 3+1U Rack, and with 2 power supplies Symphony-900W delivers up to 900W rms of high efficiency Digital output power.
The system is composed by a 1 RU exciter and an RF amplifier (3 RU), which makes an 900W rms DVB-T/H/T2, DAB/DAB+ /T-DMB or ISDB-T/
Tb complete transmitter with built in adaptive pre-correction circuits, built in GPS receiver for accurate synchronization and SFN operations, and
multiple input interfaces (Satellite Receiver, ASI, Gigabit Ethernet, or RF) so to be configured as Terrestrial or Satellite fed transmitter, on channel
repeater, re-transmitter or even transposer.
Symphony-900W final stage embeds 2 hot swappable power supply units, as well as a built in ASI and RF matrix, so 2 exciters can be connected
to it to ensure a maximum level of redundancy and avoid the use of an additional external switch over unit.
Main Feature
• Compact 3+1U 19” Rack chassis
• Up to 900 W rms output power
• Built in ASI/RF matrix for automatic switch over, without the need of using an external switch over unit
• DVB-T/H/T2, ISDB-T/Tb , DAB/DAB+/T-DMB modulations fully supported
▲1 x DVB-S/S2 Satellite Receiver input with integrated CAM
▲1 x RF input
• Easy connection to 1 or 2 exciters as main drivers
Specification
AMPLIFIER
Output Power
Configurations
RF output connector
RF input connector
RF monitor connectors
ASI Matrix in/out
connectors
EXCITER
Single
Dual
Frequency agility
Pre-Correction
MODULATOR
DVB-T/-H/-T2
Standard
Inputs
900W rms @ MER ≥ 35 dB
Single or dual driver
7/16 (f), 50 Ohm
N (f), 50 Ohm
included in the amplifier in dual exciter
configuration
BNC (f), 75 Ohm
1 x exciter
2 x exciter, ASI and RF matrix included in the
amplifier
1 Hz
Adaptive
EN300744, EN302304, EN302755, TS101191,
TS102773 (T2-MI), TS102034
FFT
Code Rate
Guard Interval
Constellation
MISO Processing
ISDB-Tb
Standard
Inputs
FFT
Code rate
Guard Interval
Constellation
Time interleaver
16K & 16K ext. (DVB-T2), 32K & 32K ext.
(DVB-T2)
standard
DVB-T2: BCH, LDPC
1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128
(DVB-T2), 1/128 (DVB-T2)
Supported
4x ASI TS/BTS BNC (f), 75 Ohm or 2x ASI
TS/BTS BNC (f), 75 Ohm and 2x RJ45 TS/
BTSoIP 10/100/1000
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
Up to 3 layers
QPSK, 16QAM, 64QAM
Fully supported
115
DTTV Transmitter
Partial reception
DAB/DAB+/T-DMB
Standard
Inputs
Transmission Modes
Operation
Analogue
Standard
EN 300401, ETS 300 799
4xETI (NI[G703], NA5376[G704] or
NA5592[G704]) BNC (f), 75Ohm
B, G, D, K, M, N, I
PAL, NTSC
Inputs
Color system
Satellite Receiver
Standard
DVB-S2
Symbol Rate
Constellation
FEC
Roll–Off
Input connector
Frequency
CAS support
LNB control voltage
RF input level
Output connector
Modality
Supported
(DVB-S2)
1-45 Msym/s (DVB-S), 2-45 Msym/s (DVB-S2)
QPSK, 8PSK, 16APSK
Automatic, all modalities available according
to the standard
Block Short or Normal
DVB-S2: BCH, LDPC
0.2, 0.25, 0.35
F (f), 75 Ohm
with standard consumer CAM(descrambling of
up to 4 services)
protection)
40 ~ 100 db/μV (with attenuator)
BNC (f), 75 Ohm
188 bytes
Max input bit rate
CAM interface
CA mode
GPS
Input connector
MHz
PPS
Phase noise
Stability
Hold-over stability
MECHANICAL
Amplifier
Chassis
Width
Height
Depth
Weight
Exciter
Chassis
Width
Height
Depth
Weight
ENVIRONMENTAL
Range
CONTROLS
Controls
ELECTRICAL
Power Supply
Exciter
Amplifier
Average efficiency
80 Mbps (CAM limit: 72 Mbps)
N (f), 50 Ohm
BNC (f), 75 Ohm
BNC (f), 75 Ohm
-140dBc/Hz @10kHz, -150dBc/Hz @ 100kHz
5 μs after 5 hours(optional 1 μs after 24 hours)
3U rack 19”
482 mm
132.5 mm
558 mm including fans and connectors
26 Kg
1U rack 19”
482 mm
43.6 mm
7.5 Kg
-5°C~40°C
90% non condensing
2500 m. a.s.l. (>2500 m. optional)
TFT touchscreen, Web GU, SNMP, GPIO
2 hot swappable power supplies feeding one
half of the amplification stages each
Single Phase 100~240 V~ 50/60 Hz, IEC320
C14 Plug
C20 Plug
35%
Model
SYMPHONY-900W UD
SYMPHONY-900W U2D
SYMPHONY-900W UI
SYMPHONY-900W U2I
Opt. G
Opt. KA
Opt. S
Opt. R
Opt. T2
Opt. L
Opt. P
Opt. N
Description
900 W rms UHF DVB-T/H Digital TV transmitter, 3+1 RU
900 W rms UHF DVB-T/H Digital TV transmitter, dual driver, 3+2 RU
900 W rms UHF ISDB-T/Tb Digital TV transmitter, 3+1 RU
900 W rms UHF ISDB-T/Tb Digital TV transmitter, dual driver, 3+2 RU
Options
Dual-cast option for analogue modulation (NTSC or PAL-M)
Symphony-900W with Single Exciter Back Panel
Symphony-900W with Dual Exciter Back Panel
116
DTTV Transmitter
Symphony-1500W is the most outstanding last engineering achievement from Digital Horizon.
In a compact 3+1U Rack, and with 2 power supplies Symphony-1500W delivers up to 1500W (wideband) or 1300W (broadband) rms of high
efficiency Digital output power.
The system is composed by a 1 RU exciter and an RF amplifier (3 RU), which makes a DVB-T/H/T2, DAB/DAB+/T-DMB or ISDB-T/Tb complete
transmitter with native adaptive pre-correction circuits, built in GPS receiver for accurate synchronization and SFN operations, and multiple input
interfaces (Satellite Receiver, ASI, Gigabit Ethernet, or RF) so to be configured as Terrestrial or Satellite fed transmitter or even transposer.
Symphony-1500W final stage embeds 2 hot swappable power supply units, as well as a built in ASI and RF matrix, so 2 exciters can be
connected to it to ensure a maximum level of redundancy and avoid the use of an additional external switch over unit.
Main Feature
• Compact 3+1U 19” Rack chassis
• Up to 1500 W rms output power
• High efficiency broadband or wideband amplifier technology
• Built in ASI/RF matrix for automatic switch over, without the need of using an external switch over unit
▲1 x DVB-S/S2 Satellite Receiver input with integrated CAM
▲1 x RF input
• Easy connection to 1 or 2 exciters as main drivers
Specification
AMPLIFIER
Wideband Output Power
Broadband Output
Power
Configurations
RF output connector
RF input connector
RF monitor connectors
ASI Matrix (dual) and RF
ASI Matrix in/out
connectors
EXCITER
Single
Dual
Frequency agility
Pre-Correction
MODULATOR
DVB-T/-H/-T2
Standard
FFT
1500W rms @ MER ≥ 35dB
1300W rms @ MER ≥ 35dB
Single or dual driver
7/8” (f), 50Ohm
N (f), 50Ohm
SMA (f), 50Ohm
included in the amplifier in dual exciter
configuration
BNC (f), 75 Ohm
1 x exciter
2 x exciter, ASI and RF matrix included in the
amplifier
1 Hz
Adaptive
EN300744, EN302304, EN302755,
TS101191, TS102773 (T2-MI), TS102034
16K & 16K ext. (DVB-T2), 32K & 32K ext.
(DVB-T2)
Inputs
Code Rate
Guard Interval
Constellation
MISO Processing
ISDB-Tb
Standard
Inputs
FFT
Code rate
Guard Interval
Constellation
Time interleaver
Partial reception
4x ASI BNC (f), 75Ohm or 2x ASI BNC (f), 75
Ohm and 2x RJ45 TS oIP 10/100/1000
standard
DVB-T2: BCH, LDPC
1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128
(DVB-T2), 1/128 (DVB-T2)
Supported
4x ASI TS/BTS BNC (f), 75 Ohm or 2x ASI
TS/BTS BNC (f), 75 Ohm and 2x RJ45 TS/
BTS oIP 10/100/1000
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
Up to 3 layers
QPSK, 16QAM, 64QAM
Fully supported
Supported
117
DTTV Transmitter
DAB/DAB+/T-DMB
Standard
EN 300401, ETS 300 799
4xETI (NI[G703], NA5376[G704] or
NA5592[G704]) BNC (f), 75 Ohm
Inputs
Transmission Modes
Operation
Analogue
Standard
B, G, D, K, M, N, I
PAL, NTSC
Inputs
Color system
Satellite Receiver
Standard
DVB-S2
Symbol Rate
Constellation
FEC
Roll–Off
Input connector
Frequency
LNB control voltage
RF input level
Output connector
Modality
Max input bit rate
CAM interface
CA mode (Conditional
Access)
CAS support
(DVB-S2)
1-45Msym/s (DVB-S), 2-45Msym/s (DVB-S2)
QPSK, 8PSK, 16APSK
Automatic, all modalities available according
to the standard Block Short or Normal
DVB-S2: BCH, LDPC
0.2, 0.25, 0.35
F (f), 75Ohm
L–band 930~2250MHz
Off, +13/18Vdc, 22kHz, 0.25 A (overload
protection)
40 ~ 100db/μV (with attenuator)
BNC (f), 75Ohm
188bytes
80Mbps (CAM limit: 72Mbps)
GPS
Input connector
MHz
PPS
Phase noise
Stability
Hold-over stability
MECHANICAL
Amplifier
Chassis
Width
Height
Depth
Weight
Exciter
Chassis
Width
Height
Depth
Weight
ENVIRONMENTAL
Range
CONTROLS
Controls
ELECTRICAL
Power Supply
Exciter
Mediaguard,Viaccess, Irdeto, Conax,
Amplifier
Average efficiency
Streams) Betacrypt, Cryptoworks,
Nagravision with standard consumer
CAM(descrambling of up to 4 services)
N (f), 50Ohm
BNC (f), 75Ohm
BNC (f), 75Ohm
-140dBc/Hz @10kHz, -150dBc/Hz @100 kHz
5 μs after 5 hours (optional 1 μs after 24 hours)
3U rack 19”
482 mm
132.5 mm
710 mm including fans and connectors
35 Kg
1U rack 19”
482 mm
43.6 mm
7.5 Kg
-5°C ~ 40°C
90% non condensing
2500 m. a.s.l. (>2500 m. optional)
TFT touchscreen, Web GUI, SNMP, GPIO
2 hot swappable power supplies feeding one
half of the amplification stages each
C14 Plug
C20 Plug
35%
Model
SYMPHONY-1500W HUD
SYMPHONY-1500W HU2D
SYMPHONY-1500W HUI
SYMPHONY-1500W HU2I
Opt. G
Opt. KA
Opt. S
Opt. R
Opt. T2
Opt. L
Opt. P
Description
1500W (WB) or 1300W (BB) rms UHF DVB-T2/T/H Digital TV transmitter
1500W (WB) or 1300W (BB) rms UHF DVB-T2/T/H Digital TV transmitter, dual driver version
1500W (WB) or 1300W (BB) rms UHF ISDB-T Digital TV transmitter
1500W (WB) or 1300W (BB) rms UHF ISDB-T Digital TV transmitter, dual driver version
Options
Symphony-1500W with Single Exciter Back Panel
Symphony-1500W with Dual Exciter Back Panel
118
Model: ANT-U-P-11
Antenna
UHF Panel Antenna
Electrical Specification
•
•
•
•
•
•
•
Frequency range: 470-862MHz
Gain: 11dBd(13.2dBi)
VSWR: < 1.1
Polarization: horizontal
Half Power Beamwidth:E-Plane-23°, H-Plane-57°
Power: 2.5kW / piece in max
Lightning Protection: all metal parts DC Grounded
including inner conductors
• Impedance: 50Ω
• Input connector: N type or EIA 7/8” or DIN 7/16 by
power
• Materials: reflector in stainless steel, lines and dipoles in copper and brass, Teflon
isolators, silicon O-rings.
• Mounting: directly on supporting structure via 4 holes ø8mm.
• Mounting Brackets: fixed brackets or tiltable brackets.
• Icing Protection: SMC(fiberglass) radome.
• Treatments: silver-plated lines, dipoles and connector.
• Pressurization: 5.0 psi.
• Antenna Dimension: 450mmx1000mmx250mm.
• Antenna Weight: 13Kg net.
• Wind Surface: 0.45 m2 front - 0.24 m2 side.
• Wind Load (at 160km/h and 30℃ air temperature): 85.03kg front - 45.35kg side.
• Survival Wind: 220Km/h.
• Packing Dimension:530mmx1050mmx370mm Packing Weight: 15.5kg.
Single Panel Radiation Patterns
Antenna Array Data
N. Faces
N. Bays
System Gain(dBd)
Vertical angle Deg. -3 dB
Weight (kg)
Vertical Aperture (mt)
Wind Load (kg)
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
1
2
4
6
8
12
1
2
4
6
8
12
1
2
4
6
8
12
1
2
4
6
8
12
11
14
17
18.6
20
21.6
8
11
14
15.6
17
18.6
6.2
9.2
12.2
13.8
15.2
16.8
5
8
11
12.6
14
15.6
24
11.2
5.5
3.7
2.8
1.8
24
11.2
5.5
3.7
2.8
1.8
24
11.2
5.5
3.7
2.8
1.8
24
11.2
5.5
3.7
2.8
1.8
14
30
78
112
165
250
30
78
165
250
335
520
60
122
252
386
514
796
78
165
345
512
705
1048
1
2.15
4.45
6.75
9.05
13.65
1
2.15
4.45
6.75
9.05
13.65
1
2.15
4.45
6.75
9.05
13.65
1
2.15
4.45
6.75
9.05
13.65
89
178
356
533
711
1067
136
273
545
818
1090
1636
184
367
735
1102
1470
2204
273
545
1090
1636
2181
3271
119
Antenna
UHF Turnstile Antenna
Model: ANT-U-T-6
Specifications
Electrical Features
Working Band
Bandwidth
Gain
VSWR
Polarization
Half power Beam width
Power Handling
Lighting Protection
Connector
Mechanical Features
Materials
Mounting
Mounting Bracket
Icing Protection
Treatments
Antenna Dimensions
Weight
Wind Load(at 160Km/h and 30° C air temperature)
Packing Dimensions
470-860MHz
UHF band IV/V
Max 6dBi
≤ 1.12:1
Horizontal
E-Plane - 22°; H-Plane - 360°
200W or 1000W
DC grounded dipoles
N or DIN 7/8” female, Impedance 50Ω
--ABS radome
--Bolts in stainless steel
--Lines and dipoles in silver-plated copper and brass
--Teflon insulators
--Silicon O-Rings
Directly on tower/mast top(Ф60-114 mm)
Included
ABS radome in white
--Silver-plating
--Hot dip galvanized
--Military grade treated MIL-C-5541
365 x 365 x 1460 mm
23.5 Kg net
230N
450 x 600 x 1600 mm(47kg gross weight)
120
UHF Turnstile Antenna
Antenna
Model: ANT-U-T-10
H-Plane
E-Plane
Specifications
Electrical Features
Working Band
Bandwidth
Gain
VSWR
Polarization
Half power Beam width
Power Handling
Lighting Protection
Connector
Mechanical Features
Materials
Mounting
Mounting Bracket
Icing Protection
Treatments
Antenna Dimensions
Weight
Wind Surface
Wind Load(at 160Km/h and 30° C air temperature)
Survival Wind
Packing Dimensions
470-860MHz
UHF band IV/V
Max 10.7 dBi
≤ 1.12:1 (-25 dB)
Horizontal
E-Plane - 11°; H-Plane - 360°
2000W – 5000W
All metal parts DC grounded including inner conductors
7/8” for 200W or 1 5/8” for 5000W
Aluminium, hot dip galvanized steel bracket
Directly on supporting mast (60-114 mm) safety hoist hook
Included
ABS radome
Bracket, covers and bolts in galvanized steel silver plated
connector and lines, military norms treatment (MIL-C-5541)
dipoles
365x365x2360 mm
43.5 Kg net
0.82 m2 front - 0.82 m2 side
67.50 Kg front - 67.50 Kg side
180Km/h
wooden cage (ISPM-15) 450x600x2500 mm - 80Kg
121
Antenna
UHF Terrestrial TV Antenna
Model: TAO-8P1/12P1
Model
TAO-8P1
TAO-12P1
Frequency
UHF
UHF
Connector
75ohm, F type Female
75ohm, F type Female
Gain
8dB
12dB
VSWR
<1.2
<1.5
Weight
0.29kg
0.6kg
Length
29cm
88cm
Installation Diagram
122
Antenna
TAO-8P1 Antenna Mechanical Drawing
TAO-12P1 Antenna Mechanical Drawing
123
Mobile TV Terminal
Mobile TV USB Dongle
Model: Tim-Dongle
Main Feature
• DVB-T/T2 and DVB-T2 Lite
• MPEG-2/MPEG-4AVC/H.264 decoding
• Android based APP for digital mobile TV receiver
• Automatic and manual full band channel scanning
• Electronic program guide
• Manage up to 1000 TV and Radio channels
• Multi languages menu, English by default
• Mini USB 2.0 connection to host device
• Offline browsing of recorded video
• Powered by OTG of USB
• Embedded software CA system Enigma
• Telescopic antenna via MCX port
124
DVB-T2/T Tuner and Demodulator
Input Frequency
Input Level
-90~-20dBm
DVB-T(EN 300 744) and DVB-T2 (EN302 755)
Demod standard
DVB-T2 Lite 1.3.1 Annex 1
QPSK, 16QAM, 64QAM for DVB-T
Demodulation
QPSK, 16QAM, 64QAM, 256QAM for DVB-T2
2K, 8K for DVB-T
FFT Mode
1K, 2K, 4K, 8K, 16K, 32K, 32K ext for DVB-T2
1/2, 2/3, 3/4, 5/6, 7/8 for DVB-T
FEC Code Rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6 for DVB-T2
1/4, 1/8, 1/16, 1/32 for DVB-T
Guard Interval
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128 for
DVB-T2
Bandwidth
6MHz, 7MHz, 8MHz
Digital Video Decoding
Standard
ISO/IEC 13818-2 and ISO/IEC 14496-10
MPEG-2 MP@ ML for SD, MP@ HL for HD
Video Decoding
H.264/AVC MP@ L3.0 for SD, HP@ L4.1 for HD
VC-1 AP@L1 for SD, AP@L3 for HD
Video Resolution
480i/480p/576i/576p/720p/1080i/1080p
Digital Audio Decoding
ISO/IEC13818-3 and TR1011154
Standard
MPEG-1 Layer I & Layer II Musicam
Dolby Digital (AC3) & Dolby Digital AC-3/E-AC3
Audio Decoding
in option
Recommended smart phone
Galaxy Nexus; SII, SIII, S4, Note 2, 8.0,10.1;
Samsung
TAB 2, 7.0 PLUS; 3 8.0
Nexus 7, New Nexus 7(2013); Fone Pad, MEMO
Asus
Pad ME172V,PadPhone Infinity; Memo Pad
smart 10” me301; EeePad2 (TF201)
Accer
ICONIA Tab A510
Archos
101 XS
ONE X(OS 4.1.1 above), ONE X Plus (OS 4.1.1
HTC
above)
Butterfly (OS 4.3 or above), New One
Sony
ARC S, LT18i, Xperia Z, ZL,VC, Z Ultra
MI
Kruger&Matz
Modecom
LG
Menu Function
Channel Search
MI 2S(OS 4.1.1 above); Mi 3, Redmi 1S(OS 4.2.2
above)
Tablet 7” model KM0793
FreeTAB 9701 HD
G Pro
Automatic and Manual search based on
Frequency and channel number
Channel
Up to 1000 channels edition, delete, mov
Management
EPG
7 days
Language
English, French , other languages in option
Conditional Access in Option
CA Vendor
Hardware less Enigma
CA Type
Required Resource from host
CPU
1.2GHz above
Operating System
Android 4.2 above
Memory
1GB above
Power supply
OTG from USB
Interface
RF Input
1 x MCX female 75Ω
USB
Mini USB 2.0
Antenna
Type
Telescopic
Gain
3dB @ 666MHz
Physicals
Power Supply
DC 5V via USB port
Power Consumption
0.5W in operation
Temperature
Operation 0~+45℃ ; Storage -10~+60℃
Humidity
Dimension
35mmx32mmx8mm
Weight
50 g with gift box
Gift box
115 x81 X 22mm
Accessories
Rod antenna in option, MCX adapter in option
125
Mobile TV Terminal
Specification
Mobile TV Terminal
DVB-T2 Smart Phone
Model: Tim-Phone-T2
Specification
Parameter
DTV standard
DTV Video Resolution
Mobile Bands
SIM Card
Operating System
CPU
Memory
Display/TP
Camera
Multimedia
Video Codec
Audio Codec
Enhanced Version
DVB-T & DVB-T2 & ISDB-T
480i/480p/576i/576p/720p/1080i/1080p
GSM 850/900/1800/1900MHz (2G)
WCDMA 850/900/2100MHz(3G)
Dual SIM, Dual stand-by
Android v4.4.2 (kitkat)
BCM 23550M,Quad-core Cortex-A7,1.2GHz
eMMC 4GB + 512MB LPDDR2
5.0’’ FWVGA IPS/ Cap. TL (upto 5 Points, GFF)
Back Camera:8.0MP AF
Front Camera:5.0MP AF
Video Player/Recorder, Music Player, FM
H.263, H.264, MPEG4
AMR-NB, AMR-WB, mp3, AAC, AAC+, eAAC+
Data Connectivity
Messaging
Connectors
Battery
Dimensions
Colors
Others
HSPA+ DL 21Mbps/UL5.76Mbps
GPRS
EDGE(DL & UL)
WIFI 802.11 b/g/n, Wi-Fi Direct
Bluetooth v4.0
Micro USB v2.0
Web Browser, SMS, MMS, Email, IM
Micro-USB
3.5mm Audio Jack
Micro SD Card External Memory (Up to 32GB)
2900mAh, Li- Ion
Stand-by up to 500 hours
Talking time up to 870 min
147 x 72 x 9.3 mm
White, Black , Blue
GPS+AGPS+Glonass, G-Sensor
126
DVB-T2/S2 Dual Tuner STB
STB
Model: Timbox-Combo
Smart Card Less CAS
Main Feature
• DVB-T2/T and DVB-S2/S dual tuner inputs
• RF Signal Strength and signal quality display
• MPEG-2/MPEG-4 AVC/H.264 SD/HD decoding
• Channel edition, delete , favorite and parental lock
• True colors on screen display user friendly menu
• Multi languages English and French etc
• Electronic Program Guide (EPG) up to 7 days
• Channel information save in memory after power off
• Automatic PAL/NTSC conversion
• Teletext via OSD & VBI
•
•
•
•
•
•
•
•
•
•
•
Multi-lingual DVB subtitling and audio track support
Software upgrade through USB and on air
Embedded hardware less CA system Enigma
Front panel channel number or time display
HDTV HDMI output and analog CVBS output
Digital audio coaxial output
Low power consumption and green power standby mode
External 12V AC-DC adaptor
USB port for multimedia content play
RF re-modulator(21CH~69CH)
In-menu advertisement insertion in option
Specification
DVB-T2/T Tuning and De-Multiplexing
1x F type female 75Ω for Input,
Connector
1x IEC 169-2 male 75Ω for loop through
output
Input Frequency
-70~-20dBm
Input Level
DVB-T(EN 300 744) and DVB-T2
Demod standard
(EN302 755)
Demodulation
QPSK, 16QAM, 64QAM, 256QAM for
DVB-T2
2K, 8K for DVB-T
FFT Mode
1K, 2K, 4K, 8K, 16K, 32K, 32K ext for
DVB-T2
1/2, 2/3, 3/4, 5/6, 7/8 for DVB-T
FEC Code Rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6 for DVB-T2
1/4, 1/8, 1/16, 1/32 for DVB-T
Guard Interval
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
for DVB-T2
Bandwidth
6MHz, 7MHz, 8MHz
De-multiplexer
MPEG2 ISO/IEC 13818-1
DVB-S/S2 Tuning and De-Multiplexing
1 x F type female 75Ω for Input
Connector Type
1 x F type female 75Ω for loop through
output
950~2150MHz
Input Level
-25~-65dBm
Symbol Rate
2~45MBaud
DVB-S QPSK: 0.35
Roll-off Factor
DVB-S2 8PSK: 0.35, 0.25, 0.2
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
FEC Code Rate
8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Voltage
Standard
Video Decoding
Aspect Ratio
Video Resolution
Standard
Audio Decoding
Audio Mode
Subtitle & Teletext
Subtitle
Teletext
Menu Function
Channel Search
Channel Management
EPG
Language
Software Update
Security
LCN
0/22KHz selectable
MPEG-2 MP@ML and MP@HL
MPEG-4/H.264 AVC BP,MP and HP@
L4.1
AVS Jizhun profile @ L6.1/4.0/2.0
4:3 and 16:9, HD to SD Conversion
480i/480p/576i/576p/720p/1080i/1080p
ISO/IEC13818-3 and TR1011154
MPEG-1, 2 for Layer I,II and III
MPEG-2,4 AAC-LC and MPEG4 HE-AAC
Dolby Digital (AC3) & Dolby Digital AC-3/
E-AC3 option
Single channel, Dual Channel, Stereo,
Joint Stereo
DVB Subtitle
EBU TELETEXT
Automatic search based on LCN or NIT
Manual search based on Frequency and
channel number
Up to 1000 channels edition, delete, move,
lock, rename; 8 favorite channel groups
7 days
English, other languages in option
loader through USB and on Air
Menu lock, Parental lock, PIN lock
Support V1 and V2 service listing
127
STB
Parental Control
Conditional Access Option
CA Vendor
CA Type
UHF re-modulator in option
RF re-modulator
RF Output Connector
Interactive application in option
Advertisement
System Resource
CPU
Operating System
SDRAM
FLASH
Front Panel
Keys
7-Segment LED
Bi-colored LED
Smart Card
Back Panel
DVB-T2 RF Connectors
DVB-S2 RF Connectors
Default setting ‘disabled’
HDMI
CVBS
Digital Audio
USB Port
CH 21~69
1 x IEC 16902 female 75Ω for output,
1 x IEC 169-2 male 75Ω for loop through
output
Re-modulator Output
Connectors
In-menu advertising data push
Power Supply
Double Core MIPS 4K Ec@350MHz
UCOS II
128Mbytes DDR2/DDR3
8Mbytes
Power Consumption
Power Supply Connector
Physicals
Temperature
Humidity
STB Dimension
POWER/OK/VOL+/VOL-/CH+/CH-,MENU/
EXIT
To display the channel number or/and
other information
Red/Green to indicate the various states
of the STB
Reader compliant to ISO in option
output
1 x F type female 75Ω for loop through
output
Gift Box Dimension
Weight
Carton Information
Shipment Information
Accessories
Remote Control Unit
Keys
Mode
Battery
1 x HDMI1.3 with HDCP (up to 1920x1080p)
3 x RCA female for Video, Audio Left and
Audio Right
1 x S/PDIF coaxial
1 x USB 2.0 software update
1 x IEC 16902 female 75Ω for output,
output
12V DC IN
Input: 100V-240V AC, 50/60Hz
Output 12V DC, 1.5A Max
8W in operation, <0.7W auto Standby
Green Power Mode
43mm(Height) × 220mm(Width) ×
132mm(Depth)
65mm(Height)x 280mm(Width)x
230mm(Depth)
0.75kg with gift box
650*280*235mm, Gross Weight: 7.5kg, 10
STB/Carton
17000 units per 40’ High Container
Remote Control, AV Cable, User Guide,
AC-DC Adaptor, HDMI Cable in option
46 with digit, Up/Down/Left/Right/OK,
Volume+/-, Program+/-, PVR keys, EPG
key, etc
Infra Red with 38kHz Carrier
2 x 1.5V, AAA
Rear Panel
128
Model: VIP-Timbox+
Smart Card Less CAS
Main Feature
• Support DVB-C,DVB-T/T2 tuner
• RF Signal Strength and signal quality display
• MPEG-2/MPEG-4AVC/H.264 SD/HD decoding
• Channel edition, delete , favorite and parental lock
• True colors on screen display user friendly menu
• Multi languages, English by default
• HDMI, S/PDIF and CVBS outputs
• Automatic PAL/NTSC conversion
• EPG up to 7 days
• PVR via external USB HDD
• Software upgrade through USB and on air
• Channel information save in memory after power off
• Front panel displaying channel number or time
• Teletext and DVB subtitle
• Low power consumption and green power standby mode
• Embedded hardware less CA system Enigma
• HbbTV interactive application in option
Specification
DVB-T2/T Tuning and De-Multiplexing
1 x IEC 16902 female 75Ω for Input,
Connector
output
Input Frequency
Input Level
-70 ~ -20dBm
DVB-T(EN 300 744) and DVB-T2
Demod standard
(EN302 755)
Demodulation
QPSK, 16QAM, 64QAM, 256QAM for
DVB-T2
2K, 8K for DVB-T
FFT Mode
1K, 2K, 4K, 8K, 16K, 32K, 32K ext for
DVB-T2
1/2, 2/3, 3/4, 5/6, 7/8 for DVB-T
FEC Code Rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6 for DVB-T2
1/4, 1/8, 1/16, 1/32 for DVB-T
Guard Interval
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
for DVB-T2
Bandwidth
6MHz, 7MHz, 8MHz
De-multiplexer
DVB-C Tuning and De-Multiplexing
1xIEC 169-24 female 75Ω for Input
Connector
1xIEC169-1 male 75Ω for loop through
output
Compliant with ITU J.83 Annex A,C, Annex
Standard
B in option
Input Frequency
Input Level
Symbol Rate
Constellation
Bandwidth
De-multiplexer
Standard
Video Decoding
Aspect Ratio
Video Resolution
Video Bit Rate
Audio Decoding
47~862MHz
43~73dBuV for 64QAM, 47~ 77dBuV for
256QAM
1~7MBaud with step of 1kBauds
16/32/64/128/256QAM
8MHz in Annex A and C
6MHz in Annex B in option
MPEG-2 MP@ ML for SD, MP@ HL for HD
H.264/AVC MP@ L3.0 for SD, HP@ L4.1
for HD
VC-1 AP@L1 for SD, AP@L3 for HD
4:3 and 16:9, HD to SD Conversion
480i/480p/576i/576p/720p/1080i/1080p
MPEG-2 MP@ML: 2~15 Mbps
MPEG-2 MP@HL: <19 Mbps
MPEG-4 AVC HP@L3:<10Mbps
MPEG-4 AVC HP@L4: <20Mbps
MPEG-1 Layer I & Layer II Musicam
Dolby Digital (AC3) & Dolby Digital AC-3/
E-AC3 in option
AAC5.1, AAC+ Level 2
129
STB
Digital TV HD Receiver
Standard
STB
Audio Mode
Audio Sampling Rate
Subtitle & Teletext
Subtitle
Teletext
Menu Function
Channel Search
Channel Management
EPG
Language
Software Update
Security
LCN
Parental Control
PVR Option
Function
ISO/IEC13818-3 and TR1011154
Single channel, Dual Channel, Stereo,
Joint Stereo
22.1kHz, 32kHz, 44.1kHz and 48kHz
7-Segment LED
Bi-colored LED
USB
DVB Subtitle
EBU TELETEXT
Back Panel
RF
Automatic search based on LCN or NIT
Manual search based on Frequency and
channel number
Up to 1000 channels edition, delete, move,
lock, rename; Favorite channel
7 days
English, French , other languages in option
loader through USB and on Air
Menu lock, Parental lock, PIN lock
Support V1 and V2 service listing
Default setting ‘disabled’
CVBS
HDMI
Digital Audio
USB
Power Switch
Physicals
Power Supply
Play/Stop/Record/Pause/Forward/Back
USB 2.0 supporting external hard disk of
250-500GB
Connector
Power Consumption
Temperature
Humidity
Conditional Access Option
CA Vendor
CA Type
UHF re-modulator in option
RF re-modulator
CH 21~69,default channel 65
Interactive application in option
Hbb TV
ETSI TS 102 796 V.1.1.1
System Resource
CPU
MIPS 34Kf@600MHz /1000DMIPS
Operating System
Linux/ECOS
SDRAM
128Mbytes DDR2/DDR3
FLASH
32Mbytes
Front Panel
MENU/OK/VOL+/VOL-/CH+/CH-,ON/OFF/
Keys
Standby
Smart Card
Reader compliant to ISO in option
STB Dimension
Gift Box Dimension
Weight
Carton Information
Accessories
Remote Control Unit
Keys
Mode
Battery
To display the channel number or/and
other information
Red/Green to indicate the various states of
the STB
1 x USB 2.0 for external Hard Disk PVR
function
1 x IEC 16902 female 75Ω for Input,
output
3 x RCA female for Video, Audio Left and
Audio Right
1xHDMI 1.3 with HDCP (up to 1920x1080p)
1 x S/PDIF coaxial
1 x USB 2.0 for external Hard Disk PVR
function and software update
ON/OFF
Adaptor 100-240V AC, 12V DC, 50/60HZ
Antenna power DC +5V supply, (Output,
default ‘OFF’)
10W in operation
<1W auto Standby Green Power Mode
35mm(Height) × 170mm(Width) ×
120mm(Depth)
78mm(Height)x 228mm(Width)x
148mm(Depth)
0.5Kg with gift box
828*295*248mm, Gross Weight: 13.5kg,
20 STB/Carton
Remote Control, Battery, AV Cable, User
Guide, Quick Guide, HDMI Cable in
option
42 with digit, Up/Down/Left/Right/OK,
Volume+/-, Program+/-, PVR keys, EPG
key, etc
Infra Red with 38kHz Carrier
2 x 1.5V, AAA
Order Information
Product Name
Model
DVB-T STB with CAS
DVB-C STB with CAS
DVB-T2/T/C STB with CAS
VIP-TimBox+ T2/T
VIP-TimBox+ C
VIP-TimBox+ T2/TC
130
Model: IPM-16
Main Feature
• MPTS and SPTS over IP input
• MPEG2, MPEG4, H.264 decoding
• 16 SD or 4 HD TV channel display
• 36 Radio channel display
• Loop display for more than 16 channels
• HDMI and VGA video outputs, Audio L/R outputs
• Mosaic screen streaming through IP and remote monitoring by VLC
• Web remote management and configuration
• Alarms on audio, video, channels
• Physical dimension:193mmx106mmx50mm(L x W x H), weight: 0.4kg
Local Multi Channel View via HDMI or VGA:
1 Channel View
4 Channel View
9 Channel View
16 Channel View
Multi Channel Loop View for more than 16 channels :
1-16 Channel
1-12 and 17-20 Channel
131
Digital TV Mosaic Monitor
Multi Audio Channel Monitoring
Mouse Quick Configuration Key
Rear Panel
Remote Multi Channel View via IP
132
Model: Tango-T2
• 1x PLP decoded at the same time
• Automatic L1-Signalling decoding
• Automatic constant rate TS output
• Null packet insertion
RF Measurement
• Full band input level: -50dBm to -10dBm
• Channel Input level: -90dBm to -30dBm
• MER: up to 36 dB ±1dB
• Shoulders: > 44 dB
• SNR, Pre LDPC BER, Pre BCH BER, FER
• T2 symbols per T2 frame
• Tone Reservation, ISSY, PLP Id List
• Carrier Frequency Offset
• Measurement Display
Constellation
Signal Spectrum
Channel Impulse Response
• Monitoring Display
SFN Windows
Signal Power Bar Graph
Recovery Transmission Modes
Specification
Standard
• DVB-T/H: EN 300 744, EN 302 304
• DVB-T2: EN 302 755, TS 102 831, EN 102 773
RF Input
• 1×RF input-BNC-50Ω
• Input Sensitivity:-95dBm ±3dB
• Input Frequency: 48MHz - 862MHz
• Bandwidth: 6MHz, 7MHz, 8MHz
TS Measurement
• Stream management
• MPEG-TS Figures: TS_Sync, Continuity_count_error, PCR jitter,
PCR repetition and PTS difference
• TS/ IP data rate
TS Input
• 1×TS input, BNC female-50Ω
• Data Format: 188/188+8(+8)/204 bytes
• Burst or Packet mode,
• Bit Rate: 50Mbps max
TS Output
• TS output via ASI port, BNC female connector
• TS streaming over IP output, RJ-45 connector
Control port
• Serial control protocol via RS-232/-485
• TCP/IP control interface Via Ethernet
Demodulation
• Support Two Inputs: RF and TS
• Real-time demodulation and measurement process
• All DVB-T2 modes supported including Single & Multi-PLPs
• Transmission mode Monitoring, including FFT, GI, Constellation,
Cell_ID, LDPC, etc.
Physical
• Supply voltage: AC 220V-DC 12V Adapter, 15W
• Aluminium package (224X378X266mm)
• Operating temperature range :0 ℃ to 50 ℃
Block Diagram
133
Portable DVB-T/T2 DTV Analyzer
Configuration and Monitoring Screen
General Monitoring
Advanced Monitoring
PCR/PTS Monitoring
Power Distribution Monitoring
Spectrum Analyzer
Constellation
Delay Profile
134
20150318
dtv.pbicn.com www.dh-tv.com

Digital TV Equipment and System

Transcription

Similar documents

WDH-5600P