SUMMER 2o15 - XKs Unlimited

Transcription

Coventry
Quarterly
SUMMER 2o15
the
Summer Driving Season Is Here
Tune It Up & Hit The Road
850 Fiero Lane San Luis Obispo CA USA | CALL: 805-544-7864 | 800-444-5247 | FAX: 805-544-1664 | email: info@xks.com
PLEASE DONATE TO SUPPORT MULTIPLE SCLEROSIS RESEARCH
Over the past several years XKs Unlimited has been a proud supporter of research for the cure of MS.
With your help we have been able to donate more than $130,000 to the Society, and we ask that you
will contribute this year, too.
We are pleased to announce the 2015 campaign includes a gift in return for your minimum donation. You can make your check out directly to the MS
Society, for tax purposes in any amount, but for
a gift of at least $75.00 we will send you
one of the 2015 MS pull-over sport shirts. These have the XKs Un$15000
limited racing E-Type and the Union Jack integrated with the MS
logo on the back and small MS/XKs Unlimited logo on the left
$12000
front breast.
Men’s tan shirt, smooth cotton
jersey with button neck.
$9000
17-9946L_________ $75.00
17-9946XL________ $75.00
$6000
17-9946XXL_______ $75.00
Women’s light blue shirt,
smooth cotton jersey with
‘V’ neck
17-9947M________ $75.00
17-9947L_________ $75.00
17-9947XL________ $75.00
$3000
UPDATE: We want to thank you for your tremendous support. Because of your generosity
we have raised nearly $12,000 toward our seasonal goal of $15,000. Please consider making your
donation if you have not already done so. Thank you.
Subscribe today
in the U.S.A.
1 Year, 12 packed issues shipped all the
way from England to your door for only $69!
Never miss aN issue • save 42% off the NewsstaNd price • exclusive subscriber beNefits & discouNts
online: www.themagazineshop.com/tclas-xkus514 • call: 1-888-201-5267 (6am-Noon est) Quote promo code: xKus514
e-mail us: usaclassic&sportscar@servicehelpline.co.uk
terms and conditions: this is offer is not open to uK or european residents. for uK and european rates please visit www.themagazineshop.com. offer is $69 for a one year subscription. this is based on the average overseas
cover price of $9.99 per issue. should you wish to cancel your subscription it will be cancelled on expiry of the current term which will not be refundable, other than in exceptional circumstances. please allow 35 days for
delivery of your first issue. offer ends 31st december 2015. for queries or more information please call 1-888-201-5267 or email usaclassic&sportscar@servicehelpline.co.uk. if you require any assistance following the
purchase of your subscription, then you can speak to a member of our customer service team on 01795 592 976 calls are charged at local rate. haymarket media Group ltd uses a best-practice layered privacy policy to
provide you with details about how we would like to use your personal information. to read the full privacy policy please visit our website www.haymarket.com/privacy.
CSCsubsPromoXKsJan15Catalog.indd 1
1/22/15 11:11:28 AM
E-Type Upgrades
2
There has been a lot of discussion in the motoring press relating to upgrades
for the venerable E-Type. We offer here eight pages of popular upgrades we
have sourced and also manufacture.
E-Type Parts Listing...............................................................................10
General parts section for all E-Type needs
20
E-Type 1R8112 Restored
This article chronicles the restoration of a nicely maintained OTS. Complete mechanical
disassembly, thorough rebuild and beautiful results. As these cars remain strong in the
resale marketplace, maybe now is the time for you to step up.
XKs Motorsport Workshop........................................................................22
24
DHC From The Frame UP: Update
Save With These
E-Type Oil, Gasoline
and Air Filter Bundles
We’ve packaged some of
our coolest and most popular new manufactured
items in convenient -- and
money saving -- bundles.
These bundles include an
oil filter, air filter(s) and fuel
filter. They do not include the
in-tank fuel pick-up filter.
Save five percent
when you buy one of
these bundles!
We continue our coverage on the restoration of the forlorn XK-140 DHC. This quarter
we share some photos of the rear body section and review the sealer, primer and color
paint process.
In This Issue…
$22.46
02-5005
XK-120, XK-140, XK-150 Parts Listing.....................................................26
General parts section for all XK-models
Early Saloon Parts Listing.................................................................33
General parts section for all Saloons
Late Model Parts Listing.................................................................................................................38
3.8 & 4.2 Series I, Earlier
Series II With Round Air Filter
‘SUPER SUMMER SALE’ Time............................................................................................................42
Multi-Application Specialty Parts.............................................................................................44
New Accessories.....................................................................................................................Cover 3
On The Cover
A recently restored E-Type OTS. This car was gently used over the years and was
brought to us for a restoration. Full mechanical, suspension, interior, top, minor
body repair and new paint. All done to the original. Now it’s once again a very
nice show piece and/or daily driver. Turn to page 20 for the whole story. DL
North America 800-444-5247 • International 805-544-7864 • Call Hours M-F 6am-5:30pm, Sat 9am-1pm Pacific Time
Classic Motorsports Magazine Monterey
Kickoff Cruise-In Presented by Hagerty
Coming to Monterey for auction week? Kick it off in style
along with the the staff of Classic Motorsports and XKs Unlimited. We’ll be gathering with a few
hundred of our closest friends at
beautiful Folktale Winery. Bring
your cool classic car and enjoy fine
wines, food and music.
Last year we had an incredible
turnout and we hope to fill the
parking lots with great classic cars
again this August. Admission is
free. You won’t want to miss this
gathering.
When: Tuesday, Aug. 11, 4pm-8pm
Where: Folktale Winery
8940 Carmel Valley Road
Carmel, CA 93923
Later Series II
$25.31
With Rectangular 02-5006
Air Filter
$33.24
02-5007
Series III V-12,
With Glass Bowl
Fuel Filter
$32.62
Series III V-12, With 02-5008
Metal Bowl Fuel Filter
800-444-5247
805-544-7864
E-Type UpgradeS
When the E-Type debuted more than 50 years ago, the reaction was nothing less than sensational.
Stunningly gorgeous, the E-Type offered an unprecedented combination of performance and sophistication that no other manufacturer could match -- at any price. But there was always room for improvement. On these pages you’ll find some of our most popular E-Type upgrades. Some simply make
your E-Type more reliable. Others will increase performance and that all-important driving pleasure.
SUSPENSION
Series I & II Adjustable
Torsion Bar Reaction Plate
17-1524
Isolation of adjuster
The best! Setting the front ride height on a Series I or II E-Type
used to be a tedious and time-consuming process. We once
carried an adjustable torsion bar reaction plate that eased the process,
but it was fairly crude and offered limited adjustment, so we developed the
Ultimate Adjustable Torsion Bar Reaction Plate. Hundreds are now in use.
Unlike those with cam adjusters, our plate offers infinite adjustability through
Porsche-style threaded adjuster rods. To set ride height, raise the car, turn the
recessed Allen-key socket and precisely dial-in the exact desired height. It
couldn’t be easier or more precise. You can easily set corner weights for more
precise handling for street or race. And from a pure labor-savings point of
view, our plate potentially eliminates the hours of shop time required to set
ride height with a standard plate.
$309.95
17-1524
High Performance Sway Bar Sets
Series I and II sway bar set with six GAZ Shocks. Our performance sway bars will
greatly improve the handling of your Series I or II E-Type. They eliminate wallow
and lean without creating a harsh ride. Bring out the sports car in your classic
Jaguar!
17-1052
17-1205-4
$1219.95
17-1052
Includes 1” front bar and ¾” rear bar.
$535.80
17-1205-4
Polyurethane Front Suspension Bushing Kits
Polyurethane bushings are truly the best of both worlds. Unlike reproduction
bushings, or even originals, they will last the life of the car and offer unequaled
resistance to dry rot, ozone and other environmental factors. Further, they deliver superior performance through less deflection compared to rubber and
do not compromise comfort. Nor do they squeak. We’ve sold these kits for the
better part of two decades and have used dozens in our restoration shop. Kits
include upper and lower A-Arm bushings, sway bar end link bushings and sway
bar mount bushings.
17-6004
17-6009
E-Type Series I and II
17-6004
E-Type Series III V-12
17-6009
$150.34
$174.92
800-444-5247
805-544-7864
High Performance Six-Cylinder
Torsion Bar Pairs
17-1201
These are superior-quality bars manufactured for us in the
USA. They are .860” diameter for a slightly stiffer -- but still fully
streetable -- ride.
17-1201
2 Summer 2015
$637.46
800-444-5247 www.xks.com
E-Type UpgradeS
BRAKES
Series I & III Wilwood Caliper Kit
While Jaguar was certainly at the leading edge of technology by fitting disc
brakes in the fifties, many improvements have been made since. Our Wilwood
brake conversion kits employ lightweight alloy calipers for a reduction in
un-sprung weight and large gains in pad area. Supplied with all necessary adapters, hardware and streetable brake pads. A great complement
would be a set of braided stainless brake lines. Kit includes four-piston
calipers and mounting hardware with new pads. Does not include rotors.
Series I
17-1210
Series III
17-1212
17-1212
$575.00
$600.00
Vented Rotor and Caliper Kit; Series I
Vented Rotor/Wilwood Caliper Conversion for Series I. Bring your Series I front
brakes into the modern era with our vented rotor/Wilwood caliper conversion kit.
Not only will you make huge gains in pad swept area, but the internally vented
rotors ensure the pads stay cool for greatly reduced fade. This kit is entirely bolton and includes new four-piston calipers, vented rotors, CNC-machined alloy rotor
adapter hats, caliper mounts, high performance street pad set and all hardware. It
does not include new splined hubs or flexible brake lines.
$1061.00
17-1210V
NEW Remote Bleeder Hoses
For the rear brakes on IRS Cars. Bleeding the rear brakes on an IRS-equipped Jaguar
has never been fun. These lines simply thread into the bleeder ports on the rear
brakes and an anchor bracket attaches to the IRS cage -- problem solved! Now
equipped with Speed Bleeder® nipples.
17-1210V shown installed does not
include new splined hubs
$99.95
06-0003
Teflon/Braided Stainless Steel Brake Hose Kits
06-0003
These high-performance brake flex lines improve brake feel by eliminating the
“give” associated with standard brake lines. Manufactured by XKs Unlimited.
17-1215
Series I Coupe and Roadster (shown)
17-1250
Series I 2+2
17-1251
Series II Coupe and Roadster
17-1252
Series II 2+2, Series III All
$89.95
$89.95
$89.95
$89.95
17-1215
Rear Vented Disc Brake Conversion Kit
Manufactured by XKs Unlimited
For track- or high-performance street use, the inboard rear brakes
can easily overheat. Many solutions have been tried over the
years but upgrading to vented rear rotors is one of the best. After poor availability from our previous vendor, we have now developed our own kit which includes rotors, rotor mount rings, caliper center spacers, caliper mount spacers, parking brake forks and
lock tabs, stainless steel caliper cross over pipes plus all hardware.
Kit For Girling Caliper Cars
17-1214
Kit With Rebuilt Girling Calipers
17-1620
$650.00
$1085.00
17-1620
www.xks.com 1-805-544-7864
Summer 2015 3
E-Type UpgradeS
ELECTRICAL and IGNITION
800-444-5247
805-544-7864
REOPUS H Replacement
Amplifier Circuit Board For V-12 E-Type
Jaguar’s problems with the Lucas OPUS ignition fitted to V-12 E-Types and
early XJ-12s are well documented. While sophisticated for its day, OPUS failures were common and age has done these components no favors. REOPUS
was an updated amplifier circuit board that cured all of these problems and made a
V-12 run like never before. REOPUS H, for “Hall Effect,” is another huge leap forward;
it also now replaces the pick-up unit, many of which are now failing due to age. Must
be used in conjunction with one of two pickup units: 08-1042 (two male and one
female connector) or 08-1044 (one male and two female connectors).
08-1040
08-1042
08-1044
REOPUS ‘H’ Circuit Board, V-12 E-Type
08-1040
Distributor Pick-Up Unit, Two Male Pins
Distributor Pick-Up Unit, One Male Pin
08-1042
08-1044
$314.95
$120.00
$120.00
4.2 Series I High Performance One-Wire Alternator Conversion
This kit brings vastly improved performance and reliability to your E-Type’s electrical system.
The 84-amp GM-type alternator uses all new components and can easily handle the increased
electrical demands of modern audio systems, cooling fans, etc. This kit is completely “bolt-in”
and will allow you to easily convert back to the stock alternator should you wish. Looks very
close to original and is about the same price as a rebuilt Lucas alternator. Installation couldn’t
be simpler: the new alternator bolts to the stock bracket and uses the stock belt. Our kit includes alternator with the custom pulley installed, custom adjusting bracket, a new belt and all
mounting hardware. Please note that this kit is for Series I cars with tachometer generator only.
Alternator Kit
$395.00
08-9010
Pertonix Flame-Thrower® Electronic Distributors
In addition to their ignition conversion kits, Pertronix manufactures complete distributors with an Ignitor® already installed. These are plug-and-play and you can easily
convert back to your original Lucas distributor. Please note that the high performance
distributor is mechanical advance only and is only available in negative ground.
Flame-Thrower Distributor, Positive Ground
17-D179600
Flame-Thrower Distributor, Negative Ground
17-D177600
High Performance Distributor, Negative Ground Only 17-D171600
Matched Pertronix Coil
17-3670
$254.32
$243.95
$279.70
$42.17
Pertronix Ignitor® Electronic Ignition Conversion Kits
Pertronix sets the standard for electronic ignition conversion kits. Their Ignitor® kits fit entirely
within the distributor, so no one will ever know you’ve ditched Joe Lucas. Highly recommended.
Application Dist Type
Part
Matched
Notes
(Polarity)Number
Coil
3.8 E-Type DMBZ.6A (+) 17-3652 $128.7917-3670
$42.17 R.1001-R.9999 & RA.1001-RA.1381; DSB116 Points
3.8 E-Type
DMBZ.6A (-) 17-3653 $115.9217-3670
$42.17 For cars converted to negative ground.
3.8 E-Type
22D6 (+)
17-3654 $114.2817-3670
$42.17 RA.1382-on; DSB101 Points
3.8 E-Type
22D6 (-)
17-3656 $104.3717-3670
$42.17 For cars converted to negative ground.
4.2 E-Type
22D (-)
17-3656 $104.3717-3670
$42.17
V-12 E-Type 36DE12 (-)
17-3664 $175.6317-3670
$42.17
Note: Numbers are engine numbers, not VIN. DSB116 points use two mounting screws; DSB101
points use a single mounting screw.
4 Summer 2015
800-444-5247 www.xks.com
E-Type UpgradeS
ELECTRICAL
Gear Reduction Starters
Bring modern starter technology to your classic Jaguar. These starters deliver more torque than a standard Lucas starter and draw less
power. They’re far lighter (up to 15 pounds in some cases) than an
original and their small size makes removal and installation much
easier. They are also an excellent value. Mounting hardware included where required. Highly recommended. One-year warranty.
3.8 E-Type (Non-Synchro Gearbox)
17-4000
4.2 E-Type (All Synchro Gearbox)
17-4001
V-12, Early, With Lucas 26327 Starter
17-4003
V-12, Later, All Lucas 26381 Starter 17-4002
17-4000
$207.95
$192.95
$207.95
$207.95
17-4001
17-4002
ENGINE
E-Type Alloy Flywheel
An alloy flywheel allows an engine to rev freer and greatly improves throttle response.
The effect is unleashing more horsepower and more flexibility throughout the rev
range.
Unlike some inferior flywheels on the market, our flywheels are made from high-quality aluminum billet with a replaceable high-carbon steel wear surface. A steel ring
gear is installed. While an alloy flywheel is a must for any high performance engine,
street-driven cars will benefit as well.
3.8 E-Type, MK II, 104 Teeth
17-1502/3
4.2 E-Type, 132 Teeth
17-1502/4
V-12 E-Type
17-1502/5
$389.95
$389.95
$389.95
High Performance Crankshaft Damper
Fits all E-Type six cylinder Jaguar engines. A must for high RPM
use or the enthusiast looking for a smoother-running engine.
Manufactured for the Jaguar engine, not adapted from another engine as some others. Each unit comes accurately marked
0-40 degrees for precise timing. Damper is supplied pre-drilled
to accept standard Jaguar crank pulley. Ideal for racing and
street engines where smoothness and reliability are important.
$544.28
17-8522
CARBURETORS
Nitrophyl Carburetor Floats
Standard brass (S.U.) and plastic (Stromberg) floats often crack and fill
with fuel. Manufactured by XKs Unlimited and molded from a single
piece of Nitrophyl, these floats eliminate the problem completely.
We’ve sold thousands. Lifetime warranty to original purchaser.
S.U. HD Carburetors (Series I)
03-0027
Stromberg Carburetors (Series II and III)
03-6175
Viton Carburetor Diaphragm,
S.U. HD8 Carbs
$22.95
$19.95
03-0027
Additives in today’s fuels can destroy older rubber fuel system components.
These diaphragms, made from DuPont Viton B, are more than up to the task.
03-6007 $24.95
www.xks.com 1-805-544-7864
03-6175
03-6007
Summer 2015 5
E-Type UpgradeS
ENGINE COOLING
4.2 Series I Alloy Water Pump
Another Jaguar Part Manufactured Exclusively For
XKs Unlimited – The Source for Classic Jaguar Parts!
These beautifully made pumps are four pounds lighter than a cast iron original, plus they’re just plain cool. Same high quality bearing and casting quality
as our cast iron pumps.
Our pumps are cast with high-quality, permanent, metal molds. They’re much
more expensive than the wooden molds commonly used for limited production
runs but yield a far more accurate casting with less flashing and therefore less
grinding. Compare our pumps to other reproductions on the market. The differences are dramatic.
Modern manufacturing techniques and state-of-the-art internal components are
used to produce a quality part that will give years of trouble-free service. The
pump casting is CNC milled and bored to exacting dimensions to ensure proper
alignment and a good bearing seal. The shafts and the permanently lubricated
and sealed bearings are upgraded and of the best quality available. Finally, the
impeller is designed for maximum flow. A gasket and all required fittings are included. Save $20.00 when purchased with an 09-5005 Series I hose kit.
$249.95
4.2 Alloy Water Pump CO-25091A
Now For Series I and II – A Modern Heater Core
Original heater cores were produced using an obsolete “expanded tube” design.
They performed poorly since there was little contact between the thin fins and
the water tubes. We decided to manufacture this core with “tube and fin” technology, where several layers of folded aluminum fin are sandwiched between wide,
flat tubes and then topped with header tanks. The entire assembly is oven brazed
so that a much greater surface area of fins is welded to the tubes, resulting in far
higher efficiency.
CO-17092
$129.95
Two Alloy Radiators
Now manufactured by XKs Unlimited, these
radiators offer excellent quality at an unbeatable price. They mount in the stock
location without modification. Not only do
they look great, but an alloy radiator offers
superior heat dissipation compared to a
stock unit -- just the thing for hot-running
E-Types.
CO-16770A
3.8 Liter
CO-24252A
4.2 Series I
$449.95
$449.95
Evans Waterless Coolant: Evans NPG +
When a classic Jaguar is driven in traffic or on hot days, the water temperature can easily rise beyond 230-degrees F. Such temperatures are not inherently dangerous, but if steam pockets form,
localized high temperatures can lead to cracks. Evans coolant is excellent insurance against such
pockets. It’s also an excellent guard against boil over. Since classic Jaguars do not have coolant
recovery systems, boil over associated with conventional coolants – and accumulated coolant loss
-- will eventually lead to extreme overheating.
09-9950
6 Summer 2015
$43.95/gallon
800-444-5247 www.xks.com
E-Type UpgradeS
ENGINE COOLING
Upgraded Jockey Pulleys
Beautifully CNC machined and powder coated, these pulleys employ sealed
bearings for smooth operation and long life -- a far cry from the original parts
that failed in short order. Manufactured in the USA by XKs Unlimited.
Jockey Pulley, Conventional “V” Belt
CO-18733
Jockey Pulley, Duplex “Double V” Belt
CO-19521
$109.95
$109.95
CO-18733
CO-19521
Stainless Steel Header Tanks
Just in and also manufactured by XKs Unlimited
are these beautiful stainless steel header tanks.
They offer unparalleled corrosion resistance and
all fittings, hose connections and attachment points are as per standard. Note
that the 3.8 part is based on the later version of that tank, so if your car is prior to
850657 (RHD OTS), 879044 (LHD OTS), 861091 (RHD FHC) or 888241 (LHD FHC),
you will need to update to hose number 09-21489. Get rid of that rusty original
or aftermarket tank! Supplied unpainted, but can be painted with Rust-Oleum
‘Hammerite Sliver’ (we can’t ship aerosols) to match original if desired, it’s available at most hardware stores.
CO-21512SS3.8-Liter
CO-24570SS
4.2 Series I
CO-21512SS
$199.95
$199.95
CO-24570SS
Fan Mount Bracket Set For Series I Radiators
A Positive Mounting System For An Efficient Electric Fan –
Mounts To The Radiator Without Damaging The Cooling Fins
Manufactured by XKs Unlimited, these alloy brackets make easy
work of mounting our 17-1570-17 high performance cooling fan to
either a 3.8 or 4.2 Series I radiator (aftermarket or standard). We’ve
never liked the idea of mounting electric fans directly to the fragile
radiator core and these brackets neatly solve that problem. Set includes upper and lower brackets and fan attaching hardware. Our
high performance fan pulls 2800 CFM of air, night and day compared to an original.
Bracket Set Only
17-1574
Bracket and Fan Bundle
17-1569
17-1574
$65.93
$394.83
Bracket set attaches to the fan assembly as shown at the right.
Then fan and bracket assembly attaches to the radiator frame
without touching or damaging the cooling fins.
17-1569
NEW Adjustable Fan Controller Kit
We have a new vendor for this item and have drastically reduced the price. It is supplied with wiring, relay, remote probe and adjustable temp control box to run one or two
fans. The probe can be inserted in the radiator fins or taped to the lower radiator hose to
activate the fans at a predetermined temperature from 160 to 210 degrees. Installation
instructions included.
17-9708
www.xks.com 1-805-544-7864
$34.95
Summer 2015 7
E-Type UpgradeS
EXHAUST and ENGINE
Stainless Steel Exhaust Headers & Link
Pipes
07-5024
Series I & II E-Type SWB. Manufactured by XKs Unlimited from type304 stainless steel, these free-flowing six-cylinder headers are beautifully formed and welded; they far surpass similar parts made in the
UK. What’s even more amazing, however, is the price. Set includes
two polished tubular headers and connector pipes to join to a standard system. Install these headers and you’ll enjoy a boost in power
and will never have to deal with flaking porcelain again! Please note
that we purposely made the link pipes on the long side, so they may
require a trim on some cars. Gaskets and other mounting hardware
sold separately.
$595.00
07-5024
800-444-5247
805-544-7864
Braided Stainless Steel Cam Oil Line
17-3553
This braided, flexible line assembly replaces the standard solid line
that is prone to fatigue cracks (with potentially disastrous results)
and persistent leaks. This flex line will not crack and adds significantly to the under-bonnet cool factor. Supplied with copper washers.
New banjo bolts, part CO-5846, available separately (three required).
$99.95
17-3553
Spin-On Oil Filter
Conversions
Tired of the mess associated with
cartridge-type oil filters? These kits
employ a conventional spin-on filter
for spill-free oil changes.
17-2004
17-2003
8 Summer 2015
17-2002
17-2009
3.8
17-2002 $211.00
4.2 Series I and Early Series II
17-2003
Later Series II
17-2004
V-12
$99.95
$178.18
17-2009 $295.00
800-444-5247 www.xks.com
E-Type UpgradeS
A Division Of XKs Unlimited
E-Type ‘XL’ FOR SALE
General Specs
3.8 Liter Engine
Big valves
High-lift cams
10:1 compression
Carrillo rods
ARP studs
Heavy duty crankshaft damper
Alloy flywheel
Vertex magneto ignition
45 DCOE Weber carburetors
Modern alternator
Holley fuel pump, stainless braided
lines, Holley fuel filter
No stranger to longtime Coventry Quarterly recipients, the XKs Unlimited E-Type
“XL” is an E-Type unlike any other. Not
only has this Jaguar been treated to a
full cosmetic and mechanical restoration
to concours standards, the list of modifications and improvements stretched
the imaginations of even the seasoned
technicians in our restoration and service shop, XKs Motorsport.
For more information, contact
Jason Len at 800-444-5247 ext. 223
or camplen@aol.com.
Exhaust
Polished, over-the-frame, stainless
headers with custom side exhaust
recessed into the body.
Body and Interior
Three inches of additional leg room
were gained by moving the firewall
forward and by modifying the rear
bulkhead for additional seat travel.
A Tilton pedal assembly was also
employed.
Additional headroom gained by replacing the standard floors with shortened V-12 floors, which sit lower.
Hand-made aluminum seats replicate
factory E-Type racing parts with
Cooling System
handmade British leather upholAlloy radiator
stery.
Custom stereo and rallye clock instalRemote oil cooler
lation
Drive Train,
Modified Smiths racing gauges, includSuspension, Brakes
ing a chronometric racing tachomT-5 five-speed close-ratio transmission
eter, simulate a lightweight E-Type
Front vented Wilwood four-piston disc
system.
brakes
Alloy bonnet with integral racing
Vented rotor rear brakes
driving lamps
Adjustable GAZ shocks front and rear
V-12 E-Type rear fender flares
Adjustable ride height front and rear
Custom-made bumpers (with over
riders removed) to harmoniously fit
Heavy duty sway bars front and rear
the body
Heavy duty torsion bars
Recessed
‘Aston’ flip-top fuel cap
Front polyurethane suspension
bushings
Solid alloy rack mounts
Custom rear suspension link system
Limited-slip differential
Lightweight Dunlop-style knock-off
alloy racing wheels
Three-ear knock-offs
Seeking $300,000
The ‘XL’ E-Type was built as a sister to the XKs
Unlimited competition car, only fully streetable.
www.xks.com 1-805-544-7864
Summer 2015 9
E-Type Parts Section • Series I • Series I.5 • Series II • Series III
NEW Electric Power Steering Conversions From EZ Electric Power Steering
If you find your E-Type’s steering is too heavy at slow speeds,
we have a solution: an EZ Power Steering conversion that’s
completely hidden under the dashboard. The standard
steering rack remains unchanged, as does the steering
ratio and under-bonnet appearance. Steering
assist is fully adjustable and is sensitive to
speed and load. CNC-cut brackets are used
to attach the system and no cutting, drilling or welding is required. What’s more,
the car can easily be converted back to
standard steering.
Electric steering offers several advantages over hydraulic. The electric motor
only uses power when steering assist is
required; conversely, a hydraulic pump runs
continuously and usually robs your engine of about four
horsepower – even when driving straight ahead.
14-5525
Because the electric power steering system is speed sensitive, it
provides assistance at low speeds but retains your E-Type’s excellent steering feel at higher speeds. And, the amount of assistance
can be adjusted to suit the driver’s preference or to compensate for
wider tires or a smaller steering wheel. With classic hydraulic systems,
the “feel” is not adjustable and often too light at high speeds. And should
the electric system ever fail (highly unlikely, we should add) the car would steer exactly as it did prior to the conversion, unlike a
hydraulic system where the steering could be dangerously heavy. Click here to see instructions before you begin. Available by
special order only. Delivery is usually about four weeks.
Series I
$2995.00
14-5525
Series II
$2995.00
14-5527
Supplied flat as shown.
Made to wrap around
column as illustrated.
Early Steering Column Felt Bushings
If your steering wheel has vertical or lateral movement,
these bushings have deteriorated. Made by XKs Unlimited from quality felt, they were fitted to 3.8-liter cars up
to 850857 (RHD OTS); 878036 (LHD OTS); 860862 (RHD
FHC) and 886753 (LHD FHC). Two required per car.
$6.84
CO-13855
800-444-5247
805-544-7864
NEW Series I and II
Proper Steering Tie Rod
Ends for Manual
Steering Cars
Now Manufactured by
XKs Unlimited
From the correct gold color to the
proper range of motion and clear
boots, these are the correct tie rod ends for all
Series I and II E-Types. Sold per pair.
CO-25447 10 Summer 2015
NEW Steering
Shaft Stop Button
Not the sexiest item we sell, but
it restricts the movement of the
splined steering shaft and prevents
the steering wheel from pulling out of the column
completely. (Always a good thing.) For all E-Types.
CO-16676
$19.12
$46.25/Pair
800-444-5247 www.xks.com
New Ductile Iron Manifolds
Six Cylinder Exhaust Manifolds
After years of development, we are excited to introduce six-cylinder exhaust
manifolds made by XKs Unlimited. Rather than the original gray iron, these
are superior ductile iron, a material known for its temperature resistance and
dimensional stability -- both of which should increase the durability of any
coating. We offer our manifolds two ways: bare, so you can source the coating
of your choice, or with a tough ceramic finish.
Ceramic-coated manifolds are first “polished” to yield a relatively smooth
surface (a laborious process) and then coated inside and out. This limits heat
absorption and ensures more heat simply exits the tail pipes. The coating is
rated to 1300 degrees F and carries a lifetime guarantee against corrosion
or failure of the adhesion to the manifold. (Any failures will be replaced one
for one and does not cover labor. No warranty against damage from abuse,
accident, or discoloration over time.) Purchase gaskets and nuts separately.
Front, Unfinished
CO-18396B
Rear, Unfinished
CO-18397B
$145.95
Front, Ceramic Coated
CO-18396C
$399.95
Rear, Ceramic Coated
CO-18397C
$399.95
Provided in bare
ductile iron for you to
finish on your own.
$145.95 ea.
$145.95
Gasket, Manifold to Head, Multi-Layer, 2 Required
CO-2318
$7.95
Donut Seal, Manifold to Downpipe, 2 Required
JA-EBC9388
$1.75
Washer, Manifold to Head, 16 Required
JA-FG105X
$0.12
Nut, Brass, Manifold to Head, 16 Required
JA-UFN.131/Q $1.60
Washer, Manifold to Downpipe, 8 Required
JA-FG105X
$0.12
Nut, Deep Brass, Manifold to Downpipe, 8 Required
CO-17916
$1.88
ranted For Life!
Ceramic Finish War
Also available finished in
black ceramic satin finish,
CO-18396C shown.
$399.95 ea.
Exhaust Manifold Installation Kit
Includes all the gaskets, seals, washers and nuts.
Fifty-two pieces. One kit required per car.
07-1505
$54.99
More Parts For The Spark
Solid Brass Core
Late 3.8 and All 4.2 Champion
WCX600-Style Spark Plug Ends
Correct V-12 Wire Set
Manufactured exclusively for us and configured correctly for the
V-12 E-type, rather than being an XJ-12/XJ-S set that “should” work.
Now made by XKs Unlimited. Sold per each. Great quality at a
reduced price.
08-0380
08-0420
www.xks.com 1-805-544-7864
$39.95
$9.49
Summer 2015 11
800-444-5247
805-544-7864
NEW
4.2 and V-12 Brake
Master Cylinder
Now manufactured by XKs Unlimited.
GR-4212-550
NEW V-12 Brake Booster/Servo
$239.95
We’ve struck a deal with the manufacturer of these quality
servos and can pass the savings on to you.
GR-4258-510
$335.95
New Lower Price…
4.2 Liter Brake Booster/Servo
New Top-Of-The Line Quality From XKs Unlimited.
We’ve ordered in bulk directly from the
manufacturer on these 4.2 brake boosters,
and can pass the savings on to you.
GR-4258-232
$274.95
Yellow Stripe
Low Pressure Hose
As used between the brake reservoirs and master cylinder, among
other locations. Sold in 11” sections.
CO-18717
$12.00
New Brakes Bring Back That Good-Time Feeling
GR-64325561SS
15% OFF SALE! SAVE AT LEAST 15% ON CALIPER REBUILD PARTS
Girling Caliper Rebuild Components, Series II and III
We supply top-quality stainless steel caliper pistons for Series II and III Girling calipers. Combined with a seal kit, some
additional hardware and a little elbow grease, these pieces will make your later-style calipers as good as new.
Stainless Steel Caliper Pistons, Caliper Seal Kits, Front
GR-64325434SS Two shown
GR-64325809SS Two shown
Stainless Steel Caliper Piston, Series II, Large, One Per Caliper
Stainless Steel Caliper Piston, Series II, Small, Two Per Caliper
Stainless Steel Caliper Piston, Series III, Large, One Per Caliper
Stainless Steel Caliper Piston, Series III, Small, Two Per Caliper
Caliper Seal Kit, Series II, Front, Axle Set
Caliper Seal Kit, Series III, Front, Axle Set
*Caliper Half O-Ring
GR-64325561SS
GR-64325434SS
GR-64325438SS
GR-64325809SS
GR-SP2517
GR-SP2511
GR-67320782
Regular
Sale
$38.70 $29.50 $27.46 $23.81 $32.16 $28.13 $1.90 $32.90
$25.08
$23.34
$20.24
$27.34
$24.76
$1.62
$1.64 $11.95 $8.19 $7.62 $18.45 $23.74 $1.39
$10.16
$6.96
$6.48
$15.68
$20.19
$23.94 $29.68 $31.53 $2.71 $14.95 $13.67 $10.75 $24.45 $32.48 $20.35
$25.23
$26.80
$2.30
$12.71
$11.62
$9.14
$20.78
$27.61
*Note: Two required per Series II caliper; four for Series III. Not included in caliper seal kits.
Brake Pad Set
Bleeder
O-Rings
Flex Hose
Brake Pad Set
JA-11370
06-7030
06-2000
06-2001
06-2083
06-GPM83
Stainless Steel Caliper Pistons, Caliper Seal Kits, Rear
GR-64325436SS
Two shown
Hardware Kit
Bleeder
Bleed Screw, Each, Series II and III
Front Brake Flex Hose, Series II and III
Hardware Kit, Brake Pads, Series II
Hardware Kit, Brake Pads, Series III
Brake Pad Set, Series II or III, Organic
Brake Pad Set, Series II or III, Semi-Metallic
Stainless Steel Caliper Piston, Two Per Caliper GR-64325436SS
Caliper Seal Kit, Axle Set
GR-SP2505
Caliper Bridge Pipe, Pair
JA-AEU1068
Bleed Screw, Each
JA-556508J
Rear Brake Flex Hose, Series II FHC & OTS
06-7016
Rear Brake Flex Hose, Series II 2+2, all V-12
06-0740
Hardware Kit, Rear Brake Pads
JA-JLM1540
06-2097
Seal Kit Brake Pad Set, Series II or Series III, Organic
Brake Pad Set, Series II or Series III, Semi-Metallic
06-GPX97
Flex Hoses
12 Summer 2015
800-444-5247 www.xks.com
NEW Adjustable Mechanical Brake Light Switch Kit, Series I and II
Some hydraulic brake light switches won’t activate your brake lights under light pedal application.
(Just the thing when Britnee is, like, totally texting her BFFs and doesn’t notice
your slowing E-Type.) These kits employ a reliable mechanical switch
mounted right on the brake pedal and allow precise adjustment to
your liking. The early kit is for cars with the original switch located on
the picture frame; the later kit is for cars with the switch located near
the brake booster. Easy installation using existing wiring. One hole
must be drilled in the firewall to provide a wiring entry point.
06-1000
Late Series I; Series II
06-1005
$34.00
$34.00
Brake Fluid Reservoir and Level Switch
Now manufactured by XKs Unlimited. Like our companion clutch fluid reservoir, the molding quality of our brake
fluid reservoir is crisp and robust; it incorporates a bottom filter and reinforcing sleeve, just like an original and an XKs
Unlimited exclusive. Original floats are made from cork (!) and aluminum, which often corrodes into oblivion. Ours is
stainless steel. Because the top differs from original, we include a correct rubber (EPDM actually) cap; with it in place
no one will be the wiser. Step up to superior parts manufactured by XKs Unlimited.
Reservoir and Level Switch Assembly
CO-36606
$47.95
Brake Fluid Reservoir Only
CO-36606-1
$19.95
Brake Fluid Level Switch and Rubber Cap Only
CO-23631
$36.95
CO-36606-1
Brake Reservoir Rubber Cap
Now made by XKs Unlimited. Excellent quality with crisp
mold lines, made from EPDM material.
CO-36606
$5.80
CO-23627
Back In Stock “Square” Clutch Fluid
Reservoir and Cap
A new production run has arrived. For later 3.8 and all 4.2 and
V-12 E-Type. Manufactured by XKs Unlimited, the quality of
this bottle far surpasses other reproductions. It’s thicker, the
molding quality is wonderfully “crisp” and the hose nipple
is reinforced with a metal sleeve. What’s more, our version
incorporates a bottom filter sock, just
like the originals and an XKs Unlimited exclusive. We’ve even included a
new cap (also available separately).
CO-36607
$49.95
CO-23631
Exclusive stainless steel float assembly
will last indefinitely unlike other cork
and aluminum replacements.
NEW Offset Clutch/Brake
Pedal
As any E-Type driver knows, pedal spacing is tight -- especially
for those of us with less than dainty feet. The mount stud on
our version is offset by 7/16”. While this doesn’t sound like
much, it makes a huge difference. Made in two layers with a
locating pin, just like an original. This part is the metal base and
does not include the rubber pad (CO-9934). Please note: manufactured with a 3/8” mounting stud; 3.8 E-Types and earlier
4.2 Series I cars use a 5/16” stud. The pedal will have to
be drilled out on earlier cars to fit the offset pedal.
CO-26532/OS CO-9934
$69.95
$4.52
E-Type Clutch Kits From England
Are things beginning to slip in the clutch department? It might be time for a
new clutch. Our three-piece kits include the clutch disc, pressure plate, throwout bearing and throw-out bearing clips. We highly recommend replacing the
pilot bushing along with the clutch.
3.8 E-type
04-HK5229
$299.95
$275.95
4.2 Liter
04-HK9702
V-12
04-HK9728 $329.95
Pilot Bushing
CO-2226
$5.95
Clutch Alignment Tool
17-0115
$3.30
www.xks.com 1-805-544-7864
Summer 2015 13
Shift Knob, 4.2 and
V-12 E-Type
$22.95
CO-23007
Duct Shield, Series I and II
Radiator
This panel ensures that no stones or other road debris can attack the radiator from below. Often badly bent and/or corroded.
CO-18282
SALE
Series
I and II 2+2
Exhaust Mount Pin
$48.84
Installation Kit, Duct Shield
Kit includes three clips, five bolts, five nuts and three washers
-- everything you need to install the shield.
Manufactured by XKs Unlimited from
stainless steel. Normal list price is $16.95.
$13.65
16-2457
CO-26160
$11.95
A Compilation Of Bits ‘n Bobs
NEW Series I
License Plate Lamps
Once again available, now manufactured
by XKs Unlimited.
LU-53993
Back in Stock
“Crimson” Brake
Fluid Sticker
This sticker was generally fitted to
all Series I and II E-Types. It is either
fixed to the brake reservoir heat
shield just opposite the reservoirs or
to the firewall just above the heater.
16-5046
NEW Placard Kit for
Series I and II Alternators
V12 Fresh-Air
Intake Screen
Assembly
Easily broken, these items are missing
from most cars. Includes triangular “NEG
EARTH” placard (with correct attaching
screw) and rounded rectangular “B+” placard. Please note that the placard on late Series II cars also said
“60 AMP”. This version does not carry that designation.
Nicely made with the correct screen pattern. Two required, sold individually.
$17.00
BD-40917
$4.30
$35.95
16-5054
$11.95
V-12 Round Cooling Fan Motor
We purchase these motors directly from the manufacturer in England. They’re generally considered far superior to the “square” motors used on Series I and II cars. With
our adapter bracket (a replica of the bracket supplied by Lucas in the 1970s and now
manufactured by XKs Unlimited) the round motor can easily be fitted to an earlier car.
LU-78497 $150.53
LU-78547-1 $29.95
SALE License Panel
Finisher, Series II E-Type
NEW V-12 Jack Shaft
Bearing Kit
We’re a bit overstocked on these quality items
from England. Normal list price is $169.73.
Discontinued by Jaguar, a V-12 engine rebuild
would be incomplete without these bearings.
Luckily, an engine builder friend in England
now makes a top-quality kit of three bearings.
BD-35962
01-0250
14 Summer 2015
$140.00
$225.00
V-12 Rubber
Pad, Over
Riders
Nicely made in England.
Replace cracked or faded
originals. These fit the front of 1971-1972 USA-spec cars
and the rear of 1971-1973 USA-spec. They fit all European-specification cars, front or rear.
BD-38827
$8.99
800-444-5247 www.xks.com
Series II Power
Steering Filter
BD-32696-7
Oddly enough, no Series II parts
book even mentions the power
steering fluid reservoir or related
components. If you haven’t
changed this filter recently, doing
so is cheap insurance to protect your
power steering pump and rack.
BD-36815
BD-36814
Series II and III Seat Hinge Covers
Original parts are flimsy at best and often cracked or missing. These are excellent
quality and more robust than originals.
Series II, Pair (enough for one seat)
BD-32696-7
$38.00
Series III, Left (outboard on driver’s seat)
BD-36814
$31.00
Series III, Right (outboard on passenger’s seat) BD-36815
$31.00
$17.50
02-MFH117
Power Steering
Reservoir Lid O-Ring
A flat seal did this job originally, but our
O-ring does the trick just fine.
JA-7751
$1.99
NEW Remote Control for Series I Clocks
These complex parts have not been available for decades. Made to accommodate
SWB and LWB cars which were originally different lengths. Includes JA-8409 chrome
screwed fixing escutcheon.
Series I FHC & OTS CO-17487
$123.26
Series II Fuel “T”
Some Items You May Have Forgotten About
Unavailable for years, this item has
been a perennial thorn in the side of concours
competitors. Incorporates the proper plastic
upper portion. No more points deductions! For
all Stromberg-equipped Series 1.5 and II. Fits
between the two carburetors.
800-444-5247
805-544-7864
NEW V-12
Antenna Grommet
At long last, we can offer the tear-dropshaped grommet as fitted to V-12 cars.
18-0002
$5.16
Available Again
V-12Air Pump
Elbow Hose
Long discontinued by Jaguar, one of our
aftermarket manufacturers has stepped up
to the plate.
CO-35099
Back in Stock
$17.35
Back In Stock!
Fuel Inlet Filter
After a long delay, we’ve received a new shipment of fuel inlet filters for Series I and II E-Types.
Manufactured by XKs Unlimited.
CO-21900
Chrome Trim Pair, Series I Roadster Rear Number Plate Panel. Top
quality parts from England. Right and left pair.
BD-19092-1-2
$124.95 Reduced $119.95
Center Joining Piece
$12.08
BD-24183
Shifter I.D. Plate
For V-12 E-Type but can be adapted
to Series II as well.
$41.76
Back in Stock
Back in Stock
Series I Heater Cable Escutcheon. Manufactured by XKs Unlimited.
www.xks.com 1-805-544-7864
$29.95
Sharpen The Interior
BD-38409
CO-17801
$95.00
CO-28915
$29.95
Chrome Bezel, Roadster Top Canopy
Panel. Manufactured by XKs Unlimited.
BD-20659
$6.95
Summer 2015 15
Series I Headlamp Glass
These are proper Triplex-branded parts. Replace cracked or
sand-blasted originals.
Right Side
BD-16786
$204.95
Left Side
BD-16787
$204.95
800-444-5247
805-544-7864
All New Lenses For Series II and III
Late Series II and
Series III Tail Lamp Lenses
Series II
Tail Lamp Lenses
Now Manufactured by XKs Unlimited. We can now offer a significant price
reduction on these lenses. Replace faded or cracked originals.
LU-54579870
Right Side
$44.95
LU-54579880
Left Side $44.95
Now manufactured by XKs Unlimited, these are the
single-reflector lenses fitted to later Series II and all
Series III. Great quality at a much lower price!
Left Side
LU-54581586
$44.95
Right Side
LU-54581613
$44.95
NEW V-12 Cubby Box
Latch and Striker
These parts were never what you might call “over
built” from the factory and are often broken. A very
nice item made in England.
BD-37358/59
$15.14
Series I Front
Motif Bar Badge
16-5007
$14.25
SALE Series I Reverse
Lamp Housing
This is an excellent reproduction.
Manufactured by XKs Unlimited.
BD-20754
$39.95
V-12 Grille
Finishers
Replace dented or pitted originals with these excellent English
reproductions.
Back In Stock, V-12 Grille Assembly
UpperBD-39521 $199.95
We have made a new production run of our all-stainless V-12 grilles. These are made for us in the USA and
the quality and attention to detail are excellent.
LowerBD-38832 $277.95
BD-38844/X
SALE Bonnet
Safety Catch Bracket
Manufactured by XKs Unlimited. For all Series
I and II. Normal list price is $19.95
BD-20320
16 Summer 2015
$14.95
$225.00
NEW Series III Wiper Blades
Correct For
These are the “Speed Blade” type blades originally supplied
for all V-12 cars. Sold per each.
JA-12441
$27.00
800-444-5247 www.xks.com
NEW Series I and II Roadster
Door Window Glass
Now manufactured by XKs Unlimited, this
glass is CNC-cut for accuracy. Great quality at
a lower price. Sold per each.
Clear 16-9030 $99.95
Tinted 16-9031 $99.95
NEW Rear Vent Window Catch Shim
For all E-Type FHC & 2+2. Use as required to adjust
fit of vent window.
$7.96
BD-25722
NEW Rear Vent Window
Catch Packing Piece
For all E-Type FHC & 2+2
BD-27268
$19.11
New Series I and II Chassis Plate for Power Steering
Please note this particular plate is for manual transmission cars.
16-1008P
$13.66
E-Type Rubber Seals
If you’re not ready to install a complete rubber kit but your E-Type is in need of a few key
seals, look no further. This, of course, represents just a small portion of what we have
available.
Outer Door Squeegee Seal, Series I & II FHC and OTS
18-2050
$10.17
Sill Seal, Proper Molded Type, Series I and II FHC and OTS BD-24789
$9.00
Sill Seal, Proper Molded Type, 2+2 and Series III OTS
BD-28447/1 $14.09
Door Shut Face Seal Pair, Series I & II FHC and OTS
BD-25898/99 $35.10
A-Post Seal Pair, Series I & II FHC and OTS
18-2015PR
Top to Door Window Seal, Series I & II OTS
Top to Windshield Header Seal, Series I & II Roadster
Top to Windshield Header Seal, V-12 Roadster
BD-21800 $30.03
BD-17413 $19.42
BD-37782-1 $11.89
Trunk Lid Seal, Early 3.8 OTS, Attached to Lid
Trunk Lid Seal, All Later E-Type OTS
BD-18055/1 $29.63
BD-25715/1 $15.43
Cowl Seal, All E-Type
18-2003
$14.95
Hatch Seal, All E-Type FHC and 2+2
BD-23347
$24.48
Luggage Runner Strip, Coupe and 2+2 (not shown)
(sold per foot; 17’ required for SWB; 23’ for 2+2)
18-2754
$2.95
Foam Grommet, Heater Intake on Bonnet, All E-Types
18-2011
$5.92
BD-37782-1
www.xks.com 1-805-544-7864
BD-18055/1
18-2050
BD-24789
BD-28447/1
$33.88
BD-25715/1
BD-25889/99
18-2015PR
BD-21800
BD-17413
18-2003
BD-23347
Summer 2015 17
4.2 Series I Thermostat Housing
These are superior-quality die castings manufactured by XKs Unlimited. Purchase a high-quality
American-made gasket as well.
Thermostat Housing
CO-23233
$59.95
Gasket
CO-23234 $1.95
NEW Series I FHC and OTS Trip
Odometer Reset Cable
Detail of
cable joiner
We have a limited supply of these previously unavailable remote
control cables.
NEW Series II 2+2 Choke Cable
CO-15468
$79.95
This part has not been available for years.
Now manufactured by XKs Unlimited.
$40.76
CO-31397
NEW Upgraded Jack Pouch
Now manufactured in the XKs Motorsport upholstery shop with the correct burlap lining. A nicely
detailed jack pouch.
$35.95
17-0102
We’ll Bet This Piece Is Missing From Your Early E-Type!
Jacking Wood, Series I and II
Jaguar recommended that Series I and II E-types be jacked from the front using a piece of wood under the front cross member, or “picture frame.” We’ve
improved upon their suggested design by providing a wider “land” for the
jack. Manufactured locally for XKs Unlimited using tough hardwood. If your
car has been repeatedly lifted without using such a block (and most have),
the flanges at the bottom of the picture frame may be bent; they’ll need to
be straightened for this block to fit.
$19.95
17-9735
Series I and II Engine Block Drain Tap
Manufactured by XKs Unlimited, this is an excellent reproduction of the original
drain tap and includes the “warts” of the originals. Use one CO-2296-3 copper
washer and as many CO-316 fiber washers as required to properly align the tap.
Note that this is also the correct part for original 3.8-liter and Series II radiators.
CO-2354
$31.95
Basically identical to the C2354 engine block drain tap above, with slightly
different threads.
This is the proper sender with the knurled holddown knob as opposed to a spade connector.
We’ve made a special purchase and are passing
the savings on to you.
CO-25126
CO-16895
Series I 4.2 Radiator Drain Tap
18 Summer 2015
New Lower Price
Series I & II
Temperature Gauge
Sending Unit
$49.95
$23.40
800-444-5247 www.xks.com
Replacement Series I Water Pumps
Our pumps are cast with high-quality, permanent, metal
molds. These molds are much more expensive than the
common wooden molds used for limited production. The
metal molds yield a far more accurate casting with less
flashing. Compare our pumps to other reproductions
on the market. The differences are dramatic.
This modern manufacturing technique
and state-of-the-art internal components
produce a quality part that will give years of
CO-15694
trouble-free service. The pump casting is inspected,
then CNC milled and bored to exacting dimensions. The
shafts and the permanently lubricated, sealed bearings are upgraded and of the best quality
available. The carbon housing-to-impeller seal is also of upgraded quality. Finally, the impeller is
designed for maximum flow and the gasket and all required fittings are included.
3.8 Iron Water Pump CO-15694
$164.95
4.2 Iron Water Pump
CO-25091
$185.00
CO-25091
800-444-5247
805-544-7864
Complete-Car Cooling Hose Kits
6-Cylinder Hose Kits
Just in are our own hose kits for Series
I E-Types. Quality is great and we have
lowered pricing significantly. Kits include
all formed and straight cooling and
heater hoses for each application.
We’ve just added a version for the ear09-5000
lier 3.8 E-Types. The breaking point is 850656 (RHD
OTS), 879043 (LHD OTS), 861090 (RHD FHC) and 888240 (LHD FHC).
3.8 E-Type, Early
09-4999
$69.50
3.8 E-Type, Later
09-5000
$69.50
4.2 Series I E-Type
09-5005
$68.00
09-5005
09-5020
NEW V-12 E-Type Cooling Hose Kit
Now at a greatly reduced price, this kit includes all cooling
and heater hoses, including all overflow hoses and header tank bleed hoses. Made to much higher quality and
reinforced for added strength and longevity. For all V-12
E-Types. A perfect project to get your V-12 ready for Spring.
09-5020
www.xks.com 1-805-544-7864
$91.60
09-5010
Series II Hose Kits
USA-Spec Coupe and Roadster
09-5010
$99.95
USA-Spec 2+2
09-5012
$99.95
European Spec (SU Carbs), Coupe and Roadster
09-5014
$96.95
European Spec (SU Carbs), 2+2
09-5017
$99.95
Summer 2015 19
Cover Car
E-Type
1R8112
Restored
Story and photos by Dave Light, XKs Unlimited
One of the perks of this job is photographing and writing about Jaguars restored by XKs Unlimited. This
1969 Series II roadster came to us in
October 2013 looking a little worn,
but otherwise very sound. Minimal
rust, straight body and rebuildable
mechanicals made this an ideal candidate for a full restoration.
We’ll let the photos and captions do
most of the talking, but here are the
With one of the local vineyards as a backdrop, the sleek E-Type OTS stands out.
highlights: We performed a total mechanical rebuild including engine, suspension, gauges, and brakes. We installed a 5-speed transmission, electronic ignition and
a rear crankshaft seal upgrade. The body was stripped to bare metal, sealed, primed and sprayed in the original Carmen Red. We
had all the chrome redone. A new black leather interior was fabricated along with new black carpets. The only untouched part of
the interior is the original steering wheel. It’s a little worn and ‘creaky’ with a few splinters, but we heeded the customer’s request.
(I would hang it in my den and put a new one in service if it was me.) Prior to the full restoration the owner had the top replaced,
so we were able to reinstall that piece as well. XKs Unlimited has been repairing, restoring, and racing E-Types longer than any
company in the world! 42years of continuous ownership, that’s experience.
The completed restoration on a, brisk, clear winter morning shows very well.
As can be seen, this is a pretty clean starting point.
Although when stripped naked it appears a daunting task,
the solid platform of this car shows here.
20 Summer 2015
Once again I’m impressed by the craftsmanship the trim department turns out. All
new leather over completely rebuilt seats makes for a comfortable perch to watch
the miles roll past. Per customer request, the original steering wheel remains.
800-444-5247 www.xks.com
Venerable is an overused word, but it certainly applies
to the 4.2 Jaguar XK engine.
A routine part of any restoration is the teardown. Again
no rust present.
The rebuilt engine on the rolling test bed -- looks like
valve-clearance adjustment time.
The meticulous process of reassembly, shown coming
along nicely.
‘The body was
stripped to bare
metal, sealed,
primed and
sprayed in the
original Carmen
Red.’
A Division of XKs Unlimited, Inc.
You can see the body came to us in very good shape. The ‘After’ of the rear quarter is on the facing page.
The close-up of the completed under-bonnet is truly show-worthy condition. You can see an example of the polished triple S.U. carbs and the spotless
appearance we like to see. With the differential-axle assembly completely overhauled it’s ready to mate up to the tub, as the front suspension is pieced
together on the lift.
www.xks.com 1-805-544-7864
Summer 2015 21
XKs Motorsport
Cylinder Head
Reconditioning
805-594-1585 CALL • 805-544-1664 FAX
www.xksmotorsport.com
XKS Motorsport has done quality Jaguar engine work for nearly
40 years. We know the XK engine and how to repair them right. The
newest XK engine is now over 30 years old and many are 50 or more.
A lot of heads have seen years of abuse and rebuilding at the hands of
the inexperienced. You will see by the detailed listing below that all the
guess-work has been replaced with expertise.
While not all cylinder heads are in great shape, many are candidates for a package price based on typical needs. Bear in mind each cylinder head can have its own
combination of problems, so the first step is a close inspection. The following parts and
procedures will apply to most heads.
Parts Replaced During Cylinder Head Reconditioning
• Valve Seats
• Valve Guides
• Valve Springs
• Valve Spring Retainers
• Valve Keepers
• Valve Stem Seals
• Intake Valves
• Exhaust Valves
• Cam Followers
• Cam Bearings
send us your
head for a quote
Procedures Included In Cylinder Head Reconditioning
• Disassemble and Clean
• Pressure Test
• Minimal-Cut Resurfacing
• Polish and Paint Exterior to Original Specification
• Remove/Replace Valve Seats
• Remove/Replace Valve Guides
• Install Cam Follower Guide Hold-Down Kit
• Install Valve Train In Head
• Install and Shim Camshafts
A properly reconditioned cylinder head can make all the difference between a professional
restoration and just a lot of money down the drain. XKS Motorsport’s extensive experience
with Jaguar engine building pays dividends to you over the long term. All pricing and procedures are based on the customer providing a cylinder head worthy of reconditioning.
Extra Charges For Additional Parts And Procedures May Include:
Replacing cam follower guides, removing and/or replacing broken or damaged studs, replacing missing or damaged parts, replacing
camshafts, align boring cam journals, welding damaged or cracked areas, and upgrading to big valves & sport cams. Prices for above
are quoted after inspection of your cylinder head. Crating and shipping cylinder heads is extra, based on location. We will be pleased to
quote in advance.
CONTACT XKS MOTORSPORT AT 805-594-1585
EMAIL: SHOP@XKS.COM • VISIT WWW.XKSMOTORSPORT.COM
22 Summer 2015
1-805-594-1587 www.xksmotorsport.com
Jaguar of Course! But Oh So Much More…
YOUR COMPLETE BRITISH SPORTS CAR
RESTORATION & SERVICE CENTER
• SINCE 1973 •
Every facet and each detail of your project performed under
one roof by the caring craftsmen of XKS Motorsport
FREE CAR PICKUP AND DELIVERY WITHIN CALIFORNIA
Getting your car to XKS cannot be easier, just contact us and we send our own truck and trailer
to your door and transport the car to our shop for FREE when having work done by us.*
Call 805-594-1585 To Discuss Your Project Today
Visit: www.xksmotorsport.com | email: shop@xks.com
www.xksmotorsport.com 1-805-594-1587
* Call for complete details on car pick-up and delivery
Summer 2015 23
A quick update, not a full report, on the XK-140
DHC project car. The body restoration is complete.
805-594-1585 CALL • 805-544-1664 FAX
www.xksmotorsport.com
DHC From
The Frame
Up: Update
Story and Photos by Dave Light XKs Unlimited
The XK-140 DHC we have chronicled in the
past few editions has reached a milestone.
All the repairs and fabrication of the body
assembly are now complete. From the photos you can see it is ready to go off to the
spray booth. After proper curing time, it
will mate up to the rolling chassis and the
reassembly will begin.
All the body repairs have been made, it has been sealed and primed and now goes of to get
color. Many will recall the first article where we had the rolling chassis complete; below are a
couple of refresher photos.
Not only have we done the full body restoration but we rebuilt the motor to the highest standards,
converted the car to a five speed, converted to disc brakes, added power rack-&-pinion steering, along
with subtle suspension up-grades. We have been restoring and improving the performance of classic
Jaguars longer than any shop. We developed many of the upgrades seen elsewhere including England!
24 Summer 2015
800-444-5247 www.xks.com
Front Disc Brakes
For The XK-120
and XK-140
Story by Michael Marter
Photos by Dave Light
The E-Type upgrades get a lot of publicity,
but we haven’t neglected the earlier cars.
It’s our feeling the XK-120 and 140 cars need
upgraded brakes as much as the E-Types.
Our goal with this kit (above) was to put
XK-150 front disc brakes on the XK-120 and
XK-140 -- not to create the monster kit with Above is the complete kit (order number 06-0031) laid out to see the level of detail we have put
into it. We’ve retained Jaguar parts throughout along with some custom adapters and brake
six-pot calipers gripping rotors the size of a hose upgrades. This kit is applicable to the wire-wheeled cars only.
medium pizza. The photo tells the story, but
this is the most complete kit in the industry, with all the required hardware included, not to mention new splined hubs, rotors,
disc brake cylinders, hoses, etc., etc. For single or dual master cylinder, but wire wheel cars only. This kit includes our proprietary
braided stainless steel brake lines. They eliminate the need to modify the front brake pipes and make the kit totally bolt-on or
bolt-off should you wish to convert back to drums. We also include a braided rear line. Bring some stopping power to your XK120 or XK-140! XKs Unlimited order number 06-0031.
The 06-0031 disc brake kit, above, has been a great success and we also offer an alternative version utilizing Wilwood brand
forged alloy calipers (06-0032) in place of the original-style Dunlop calipers. This results in a greater pad swept area and a further
reduction in un-sprung weight. It’s also quite a bit less expensive. Key to the kit is our braided stainless steel brake flex-lines,
they allow for a totally bolt-on conversion that’s completely reversible any time you wish. Kit includes splined wheel hubs, rotors, calipers, caliper mounting brackets, braided stainless flex lines (we also include
a new rear line with this kit) and all hardware. This kit is applicable for all XK-120s and
XK-140s with wire wheels. Visit www.xks.com for more details.
These isolated photos show the 06-0032
Wilwood caliper kit in place. With the
caliper adapters you’re able to bolt on
truly state-of-the-art brakes. Directly
above is an XK-140 and below is
the kit on an XK-120.
Illustrated here is the kit (order number 06-0032) as developed with Wilwood. It too is a complete nut
and bolt conversion kit, lacking nothing but your labor. If you’re in the throes of a restoration on a car
you intend to drive, either kit will make a worthwhile improvement.
www.xks.com 1-805-544-7864
Summer 2015 25
XK-120-140-150 UpgradeS
Just like the E-Type, XK-120’s introduction was nothing short of a revelation. Its aerodynamic envelope-body and DOHC six-cylinder engine wowed the public and relegated
just about every other sports car obsolete. XKs Unlimited has kept the XK-120 -- and its
successors, the XK-140 and XK-150 -- on the road for decades now. In addition to a full
range of standard replacement parts, we also offer a number of upgrades to improve
the performance and reliability of your XK.
Ignition Upgrades
Pertronix Ignitor® Ignition Kits for XK
We’ve sold thousands of Pertronix products over the years and
they yield consistently excellent results. Ignitor® electronic ignition conversion kits eliminate troublesome breaker points forever
with a slick magnetic pick-up that’s fully contained within the distributor cap for a “no one will ever know” installation. Available for
positive ground (standard) or for cars that have been converted to
negative ground. To get the most of an Ignitor® kit, also purchase
the matched coil.
XK-120, XK-140 Positive Ground
17-3650
XK-120, XK-140 Negative Ground
17-3651
XK-150, Positive Ground
17-3652
XK-150, Negative Ground
17-3653
Matched Coil, All Above Applications
17-3670
$202.18
$189.76
$128.79
$115.92
$42.17
Suspension Upgrades
High Performance Front Sway Bar Kit
Easily owner-installed, this 7/8” bar is one of the easiest ways to eliminate body roll and
improve your XK’s handling. For all XK-120, XK-140, XK-150. This top quality USA-made
bar is black powder coated for a lasting appearance. Supplied with new mount bushings
but not end link bushings. (We suggest purchase of part number 17-6025, also.)
17-1205-1C $299.95
Front Sway Bar, XK
Polyurethane Front
Suspension Bushing Kits
We’ve sold thousands of polyurethane suspension bushings over the
years and use many of them ourselves. Poly bushings offer a cake-andeat-it-too combination of better performance without a harsh ride or
increased vibration transmission. All bushings are supplied in black for a
standard appearance. Please see our XK catalog for partial bushing kits.
Front Bushing Kit, all XK
$183.14
17-6020
Note: Kit includes upper and lower A-arm bushings, sway bar mount bushings and
upper and lower sway bar link bushings.
Sway Bar End Link Bushing Kit Only
17-6025
$46.76
Note: Includes four conical lower link bushings and four upper link
bushings. (These items are included in the 17-6020 kit.)
26 Summer 2015
800-444-5247
805-544-7864
800-444-5247 www.xks.com
XK-120-140-150 UpgradeS
Brake Upgrades
Wilwood Caliper
Front Disc Brake
Conversion Kit
For XK-120 and
XK-140 With
Wire Wheels
Our disc brake kit with
Dunlop calipers was a great
success so we developed an
alternative using Wilwood
forged alloy calipers for
greater pad swept area
and a further reduction in
un-sprung weight. It’s also
quite a bit less expensive.
Key to the kit is our exclusive braided stainless steel
brake flex-lines -- they allow
for a bolt-on conversion that’s completely reversible. Kit includes splined wheel hubs, rotors, calipers, caliper mounting
brackets, braided stainless flex lines (we even include a new rear line) and all hardware. For all XK-120 and XK-140 with wire
wheels. Does not fit disc-wheel cars or XK-150.
06-0032
$1499.99
XK-150
Wilwood
Caliper Kit
While Jaguar was certainly at the leading edge of technology by fitting disc brakes in the fifties, many
improvements have been made since. Our Wilwood brake conversion kits employ lightweight
alloy calipers for a reduction in un-sprung weight and large gains in pad area. Supplied with all
necessary adapters, hardware and streetable brake pads. A great complement would be a set of braided stainless brake
lines. Kit includes four-piston calipers and mounting hardware with new pads. Does not include rotors.
XK-15017-1210
$575.00
Teflon/Braided Stainless Steel
Brake Line Kits
These high performance brake flex lines improve brake
feel by eliminating the “give” associated with standard,
rubber, brake lines. Manufactured by XKs Unlimited and
sold in car sets of three hoses.
$99.95
XK-15017-1215
$89.95
XK-120 and XK-140
www.xks.com 1-805-544-7864
17-1254
Summer 2015 27
XK Parts Section • XK-120 • XK-140 • XK-150
NEW Electric Power Steering Conversions From EZ Electric Power Steering
If you find your XK’s steering is too heavy at slow speeds, we have
a solution: an EZ Power Steering conversion that’s hidden under the dashboard. The standard steering box/rack remains
unchanged, as does the steering ratio and under-bonnet appearance. Steering assist is fully adjustable and is sensitive to
speed and load.
Electric steering offers several advantages over hydraulic.
The electric motor only uses power when steering assist is
required; conversely, a hydraulic pump runs continuously
and usually robs your engine of about four horsepower –
even when driving straight ahead.
14-5510 for XK-150
Because the electric power steering system is speed sensitive, it provides assistance at low speeds but retain your XK’s
steering feel at higher speeds. And, the amount of assistance can be
adjusted to suit the driver’s preference or to compensate for wider tires
or a smaller steering wheel. With classic hydraulic systems, the “feel” is not adjustable and often
too light at high speeds. And should the electric system ever fail (highly unlikely, we should add) the car would steer exactly as it
did prior to the conversion, unlike a hydraulic system where the steering could be dangerously heavy.
If you’ve read about these systems in the E-Type section, please note that installation in an XK-120 is more complex and requires
taking a section out of the steering column tube and shaft. Welding is required and some material must be removed under the
dash. The XK-140 and XK-150 upgrade is much simpler than a 120 but under-dash sheet metal must still be removed for clearance. Click here to see instructions before you begin. Available by special order only. Delivery is usually about four weeks.
XK-120
14-5500
$3195.00
Correct Steering Tie Rod
Ends For XK-140
and XK-150
Until now, the only tie rod ends available
for the XK-140 and XK-150 were
aftermarket parts that looked
nothing like an original. We’ve
duplicated the distinctive shape
of the originals and even painted
them black -- also just like an
original. Sold per pair. Manufactured
by XKs Unlimited.
CO-8323
$74.95/pr.
$2995.00
XK-14014-5505
XK-150
$2995.00
14-5510
Early XK-120 Sway Bar
Mount Bushing
This smaller bushing
was fitted to 660001
to 661004 (RHD OTS),
670001 to 672669 (LHD
OTS), 669001 to 669002 (RHD
FHC), 679001 to 679896 (LHD
FHC). Not fitted to Drophead Coupe.
This bushing is about 19/32 (15mm); later cars
used a 5/8” (17mm) bushing. Sold individually.
CO-3056
$8.11
Rear Suspension Upper
Bump Stop
For all XKs. Restricts movement of axle assembly.
These are often “perished” to use the UK parlance.
Sold per each, two required.
$13.61
CO-3208
Front Suspension
Rebuild Kits
Nothing will put your XK back on track like a
font suspension rebuild. Our kits include upper
and lower A-Arm bushings, upper and lower ball
joints, sway bar end link bushings and mount
bushings plus upper and lower ball joint lock
tabs -- everything you’ll need for a complete
rebuild.
Note: Early kit pertains to cars with a smaller
anti-roll bar fitted to 660001 to 661004 (RHD
OTS), 670001 to 672669 (LHD OTS), 669001
to 669002 (RHD FHC), 679001 to 679896
(LHD FHC). Not fitted to Drophead Coupe.
28 Summer 2015
Early XK-120
14-0999
$320.44
Later XK-120, All XK-140, All XK-150 14-1000
$309.86
800-444-5247 www.xks.com
09-1403
XK-140 OTS
Jubilee Hose Clamp Kits
XK-120 09-1600 $41.06
XK-140 09-1601 $52.46
XK-15009-1602$52.46
XK-120
Roadster to 670682 (About Mid 1950)
Roadster From 670683 (About Mid 1950)
DHC and FHC
XK-140
XK-120
09-8702 $110.93
OTS To VIN 811423 (June 1955)
OTS From VIN 811424 (June 1955)
DHC To VIN 817459 (Mid 1955)
DHC From VIN 817460 (Mid 1955)
FHC To VIN 814240 (Mid 1955)
FHC From VIN 814241 55-ON
XK-140
09-8706 $143.44
XK-150
Cheney Hose Clamp Kits
XK-150 - Early Heater 09-8708 $293.89
XK-150 - Late Heater 09-8710 $293.89
Complete Cooling
Hose Kits
09-1400 XK-120 Roadster
With Early Heater
With Late Heater
“S” Triple Carburetor
09-1400 $70.57
09-1401 $68.28
09-1402 $74.70
09-1403
09-1404
09-1405
09-1406
09-1407
09-1408
XKs Unlimited offers complete cooling/
heater hose kits made from top-quality
reinforced hoses. A perfect winter project
to get your XK ready for summer. Kit
prices are accurate at time of publication
but might fluctuate slightly.
$101.36
$101.95
$101.36
$101.95
$94.73
$95.32
09-1409 $76.37
09-1410 $84.42
09-1411 $84.78
09-1409 XK-150 Early
New Ductile
Iron
Manifolds
Manufactured by
XKs Unlimited
Ceramic Finish
!
Warranted For Life
Provided in bare ductile
iron for you to finish on
your own.
$145.95 each
Also available finished in
black ceramic satin finish, CO-2213C shown.
$389.95 each
After years of development, we are excited to introduce six-cylinder exhaust manifolds made by XKs Unlimited. Rather than
the original gray iron, these are superior ductile iron, a material known for its temperature resistance and dimensional stability — both of which should increase the durability of any coating. We offer our manifolds two ways: bare, so you can source the
coating of your choice, or with a tough ceramic finish.
Ceramic-coated manifolds are first “polished” to yield a relatively smooth surface (a laborious process) and then coated inside
and out. This limits heat absorption and ensures more heat simply exits the tail pipes. The coating is rated to 1300 degrees F and
carries a lifetime guarantee against corrosion or failure of the adhesion to the manifold. (Any failures will be replaced one
for one and does not cover labor. No warranty against damage from abuse, accident, or discoloration over time.)
Front, Unfinished
CO-2213B
$145.95 ea.
Front, Ceramic Coated
CO-2213C
$389.95 ea.
Rear, Unfinished
CO-2214B
$145.95 ea.
Rear, Ceramic Coated
CO-2214C
$389.95 ea.
Loose Manifold Hardware
Gasket, Manifold to Head, Multi-Layer, 2 Required
Gasket, Manifold to Downpipe, 2 Required
Manifold Installation Kit
Includes all above gaskets, washers and nuts.
Fifty-two pieces. One kit required per car.
07-1504
$79.44
www.xks.com 1-805-544-7864
Washer, Manifold to Head, 16 Required
Nut, Brass, Manifold to Head, 16 Required
Washer, Manifold to Downpipe, 8 Required
Nut, Deep Brass, Manifold to Downpipe, 8 Required
CO-2318
$7.95
CO-495
$4.95
JA-FG105X
$.17
JA-UFN.131/Q
$1.46
JA-FG105X
$.17
JA-NN.137/Q
$3.12
Summer 2015 29
Master Carburetor Restoration Kits
If you’re planning to restore your XK’s carburetors, look no further. Kits include our USA-made
rebuild kits, overflow pipes, our Nitrophyl
floats, metering needles, Grose-type jets,
dampers, damper springs, float filters,
insulation blocks, dashpot and float chamber
screws, damper oil and starting carburetor
washers -- everything required to restore
your carburetors. Save ten percent off individual prices. One kit required per car.
XK-120, XK-140 03-7000 $384.91 XK-150 03-7004 $331.19
XK-150 “S” 03-7006 $596.03
Distributor Vacuum Advance Units
A properly functioning vacuum unit is vital to the performance of any street-driven
Jaguar. Our units are beautifully made in the USA and carry all original markings.
Want to know more? Read the informative article Understanding Distributor Vacuum
Advance Units on our website
$89.95
XK-120LU-419066
XK-120 & XK-140 Fuel
Pump Rubber Cover
XK-140LU-421720
XK-150 3.4-Liter, 8:1 Compression
LU-421027
LU-54412348
LU-54410709
LU-421189
XK-150 3.4 Liter, “S”, 9:1 Compression
LU-423461
XK-150 3.8 Liter, “S”, 8:1 or 9:1 Compression
An easily installed “Saturday Morning” part. Replace
scratched originals.
$7.29
16-0069
XK-120 & XK-140
Kidney Plate
Door Pull
Top quality parts from
England.
Split Rivet
$32.13
$0.98 ea.
XK-120 & XK-140 Roadster
Door Striker Plate
Mounted on the door shut face, these
plates engage the latch mechanism
mounted in the door. Same right or
left. As per BD2930. Two screws required per striker. Made in England.
$88.66
16-0242 JA-AS.302/4H
30 Summer 2015
Original housings were chromed pressings with crisply defined details.
Until now, reproductions were thick castings; quality was good but the
excessive wall thickness blunted the finer points. One of our UK vendors
has resumed production of a proper pressing and the quality is exceptional.
Sold individually.
$85.79
16-0051
Rubber Pad Pair
18-0006
$20.96
XK-120 & XK-140
Roadster Door
Dovetail Pair
Made in England, these mating pieces
ensure proper door alignment and are
subject to wear over time. As per BD2941
& BD2942. Fits right or left. Four mounting screws required per side.
16-0241
Attaching Screw
For door striker plate
$11.74
Early
XK-120
Improved
Sidelamp
Housings
Under sidelamp housings
Attaches kidney Plate. Four required per plate.
BD-22385
CO-2839
LU-54412348
XK-120 & XK-140
Roadster Top Attaching
Spear
16-0211
Living under the car, XK fuel pumps can take a
beating from road spray and mud. Jaguar fitted
this cover to protect the pump.
$1.68 ea.
$42.69
Door Dovetail Pair Attaching
Screw
JA-AS.502/4H
$0.93 ea.
800-444-5247 www.xks.com
XK-120 Bonnet Hinges
Made in England, these XK-120 bonnet
hinges offer top-drawer quality at a
reasonable price. Same right or
left. For all body styles.
BD-4379
$191.74
NEW RHD XK-120 & XK-140 Roadster
Window-Frame Mirror
Nicely made and easily removed, this mirror is perfect for XK-120 and XK-140 roadsters. Its alloy arm
clips and screws into the windshield frame. The stainless steel mirror housing swivels to adjust. Uses
existing screw holes -- no new holes need be drilled.
Right Side, RHD Cars
17-1403
$119.74
Left Side, LHD Cars
17-1402
$116.66
XK-140, XK-150
Overdrive Buffer
XK Heater Valve
and Knob
Made in England, this buffer keeps movement of the
overdrive unit in check. These are
often attacked by various leaking fluids.
Now manufactured by XKs Unlimited. After a long
“availability black out” from England, we decided to
make our own XK heater valves. Quality is excellent,
we have plenty in stock and the price is now lower.
Finally, we’ve also included the knob.
$20.14
CO-8398
CO-4392
$119.95
800-444-5247
805-544-7864
Wiper Motor Mount Bracket
XK-120 & XK-140
LU-741583
$22.12
SALE XK-120
Bonnet Rod Clip
Jack Stowage Rubber Socket
Prevents jack from rattling when stored. For all XKs.
One required.
$10.36
BD-3527
Jack Tubes Rubber Socket
Located in Chassis Frame, for all XKs,
two required per car.
JA-1048
Holds rod in closed position.
Normal list price is $27.65
BD-4834
$23.95
$6.02
XK-140/XK-150 Rear
Bumper Bar Grommets
We have to buy these in large quantities and a new production run is now in stock. Nicely made. Replace cracked
originals.
Inner (Near Boot Lid)
BD-10331
BD-10331
$4.39
Outer (In Fender/Wing) BD-10330
$4.41
www.xks.com 1-805-544-7864
BD-10330
Summer 2015 31
NEW Later XK-120 & All XK-140
Brake Restoration Kit
If your spring plans include some serious brake work, this
bundle is for you. It includes wheel cylinders, brake shoes,
brake flex hoses, return springs, bleed screws, wheel cylinder banjo bolts and washers and front friction pads -- everything to “zero-time” your braking system. All parts are
for front and rear, so just one kit required per car. Forty
three pieces total. Save 20 percent when you buy the bundle! This kit is for later XK-120 with dual master cylinder/self
adjusting brakes and all XK-140. Kit price may vary slightly.
06-0015
$1,167.94
Additional New Brake Components
Front Wheel Cylinder
XK-120 With Single Master Cylinder
Early XK-120 and All
XK-140 Brake Master
Cylinder, Single Type
GR-25452
These are quality TRW/Lucas-brand
master cylinders.
GR-28708
GR-30635
GR-25452
$185.14
$88.95
You’ll Want New Hardware Too
NEW XK-120, XK-140 Brake Shoes
GR-30635
Along with the wheel cylinders, we also recommend replacing
the following components. One of each is required per wheel
cylinder and they are manufactured by XKs Unlimited.
Now manufactured by XKs Unlimited, our shoe sets use a
modern ceramic lining material for excellent
braking performance. They are sold outright
-- no cores to fiddle with. Sold per axle set.
Two sets required per car (same front and
rear). For later XK-120 with dual master
cylinder and all XK-140.
JA-35130
$63.95
XK-120 With Dual Master Cylinder,
All XK-140
Copper Washer, Small CO-3925
Copper Washer, Large CO-3926
Banjo Bolt
CO-3906
$1.63
$1.63
$13.95
$159.95/axle set
Updated XK-150
Brake Servo
XK-150 Brake
Rotors
This is the later “replacement” type
servo that requires less pedal effort.
Much less expensive than a rebuilt
original.
GR-4258-221
Now manufactured by XKs
Unlimited. Excellent quality
at a reduced price. Same front
and rear.
$249.95
06-0024
$59.95 ea.
XK-140, XK-150 Front Turn Signal Lamp Boot
JA-8059
These boots prevent dirt and moisture from entering the back of
the lamp units.
JA-8059 $12.11
XK-120 Rear Lamp Pad Pair
Now sourced from England, these pads fit between the body and
the lamp housings.
18-0015
18-0017
32 Summer 2015
JA-8083
18-0020
18-0015 $13.75
XK-120 Tail Lamp Rubber Body
These pads fit between the body and the lamp housings on all
XK-140 and earlier XK-150 with “single” tail lamps.
LU-575003
Early XK-150 Rear Lamp Pad Pair, XK-140
These boots retain the lens/rim and prevent moisture from reaching the bulb holder.
$6.60
18-0016 $24.56
XK-140 and Early XK-150 Rear Lens Seal
These pads fit between the body and the lamp housings on later
XK-150 with “dual” tail lamps.
18-0020 $4.29
Late XK-150 Rear Lamp Pad Pair
18-0016
LU-575003
18-0017
$29.95
800-444-5247
805-544-7864
These fit all XK-140 and earlier XK-150 with
“single” tail lamps.
Late XK-150 Rear Lens Seal
For cars with dual tail lamps. An easy Saturday morning project to
protect the lamp unit internals.
JA-8083 $9.02
800-444-5247 www.xks.com
Saloons • MK VII • MK VIII • MK IX • MK I & II • 3.8S • 420 • MK X • 420G
Heater Cables, MK II
There is still plenty of cool-weather driving ahead for
many parts of the country. Replace frayed or sticking
cables with our modern cable and housing assemblies.
They’re manufactured exclusively for XKs Unlimited in
the USA.
Cable to Heater Valve
Cable to Heater Flap
CO-15975-1
CO-15976
CO-15975-1
CO-15975
$12.61
$29.61
As Spring Becomes Summer A Man’s Thoughts Turn To A Tune UP!!
(Especially If He’s Got A Jaguar He Hasn’t Driven All Winter)
Ignition Components and Filters
Before the summer driving season begins, now is the time to replace any
questionable ignition system components and refresh your filters.
Ignition Parts
Distributor Cap, MK VII, MK VIII
Distributor Cap, MK IX, MK I, Early MK II, MK X 3.8
Distributor Cap, Later MK II, 3.4S/3.8S, 420, MK X 4.2/420G
LU-DDB161
LU-DDB192
LU-DDB115/X
$44.95
$44.95
$15.95
Points Set, MK VII
Points Set, MK VIII, MK IX, MK I, Early MK II, MK X 3.8
Points Set, Later MK II, 3.4S/3.8S, 420, MK X 4.2/420G
LU-DSB122
LU-DSB116
LU-DSB101
$9.10
$6.59
$3.10
Condenser, MK VII
Condenser, All Other Early Sedans
LU-DCB121
LU-DCB101
$15.40
$3.26
Rotor, All
LU-DRB106
$2.50
Oil Filter, MK VII, MK VIII, MK IX
Oil Filter, MK I, MK II, 3.4S/3.8S, 420, 420G, MK X
02-FG2421
02-GFE101P
$13.50
$5.20
Air Filter, MK VII, MK VIII, MK IX
Air Filter, MK I, MK II, Earlier 340
Air Filter, Later 340, 3.4S/3.8S, 420, MK X, 420G
JA-5903
CO-16484
CO-19530
$121.41
$27.89
$13.36
Fuel Pick-Up Filter, In Fuel Tank, All (2 required)
Washer, For CO-990 Filter
Fuel Filter, MK IX, MK II, 3.4S/3.8S, 420, MK X, 420G
CO-990
CO-1617
CO-28080
$52.95
$2.05
$7.49
Power Steering Filter, MK IX and Later
02-MFH117
$17.58
Note: Early points are secured with two screws, late with one.
Oil, Air, Fuel & Power Steering Filters
L.E.D. Dash Bulb Kits
Many owners of classic Jaguars find the dashboard
lights dim and the instruments difficult to read at night. We’ve
matched up the various Lucas bulbs with super bright LED counterparts to
solve the issue completely. These kits include bulbs for the instruments, panel lights, warning lights and interior lights. Because LEDs are polarity sensitive, please take note if your car has been converted to negative ground.
MK VII, MK VIII, MK, Positive Ground, 7 Pieces
Sample shown actual kits may vary
www.xks.com 1-805-544-7864
08-6044
$36.96
MK VII, MK VIII, MK, Negative Ground, 7 Pieces 08-6046
$36.96
MK I, Positive Ground, 7 Pieces
08-6048
$35.64
MK I, Negative Ground, 7 Pieces
08-6050
$35.64
MK II, Positive Ground, 18 Pieces
08-6052
$93.06
MK II, Negative Ground, 18 Pieces
08-6054
$93.06
3.4S/3.8S, Positive Ground
08-6056
$104.28
3.4S/3.8S, Negative Ground
08-6058
$104.28
Summer 2015 33
All New Cooling Components For Your Saloon
NEW MK VII, MK VIII, MK IX Alloy Radiator
At the risk of sounding like a broken record, our alloy radiators for the Series I
E-Type and MK II have been so successful we’ve expanded the program to include
the MK VII, MK VIII and MK IX. While brass and copper efficiently dissipate heat, all
the solder used to hold them together acts as a huge heat sink, which is why an
alloy radiator is often far superior to an original. Please note that these radiators
are not concours-correct.
$449.95
CO-8108A
Alloy Radiator, MK II
Our Series I E-Type alloy radiators have been such a success that we’ve now made
a MK II version. They offer the same improved cooling and excellent value as the
E-Type units. Supplied with steel frame as shown. Requires use of pressure cap
17-703-2444. Purchase separately.
CO-18920A
17-703-2444
$249.95
$10.24
Order a new
cap separately
Radiator Mount Kit, MK I, MK II, 3.4S/3.8S
Includes special mount bolts and spacers, nuts, washers and
grommets; 22 pieces in total.
16-0018
$25.02
MK II radiator mount kit, extra
Touring and ‘Keepin’ It Cool’
Early Saloon Water Pumps
Heater fitting
gasket separately
CO-7618
Manufactured by XKs Unlimited. All new materials, no core charges. Our
pumps are cast with high-quality, permanent, metal molds. They’re much
more expensive than the wooden molds commonly used for limited
production runs but yield a far more accurate casting with less flashing and
therefore less grinding. A modern bearing and impeller design ensure top
performance. Compare our pumps to other reproductions on the market.
The differences are dramatic.
MK VII from engine B.2917; All MK VIII;
MK IX Engine NC.1001 to NC.7000; 3.4-Liter MK I
CO-7618
CO-7618 Includes pump gasket.
Pump Gasket Included
$185.00
$2.00
CO-7733
Order CO-7733 heater fitting gasket separately.
CO-15694
Pump Gasket and Fittings Included
MK II; MK IX Engines NC.7001 to NC.9999 and all NE-Series Engines;
Early 3.8 MK X
CO-15694
$164.95
MK I & MK II Thermostat
Housing/Water Outlet
Now manufactured by XKs Unlimited. These are die cast rather than
sand cast. Die casting is a high-pressure casting method that produces
a much more dense casting with no air bubbles and a smoother surface
finish. Not only have we greatly improved quality, but the price is now
lower, too! Purchase CO-4985 gasket separately.
34 Summer 2015
HousingCO-12422 $49.95
GasketCO-4985
$1.95
800-444-5247 www.xks.com
Flex Fans
‘Keepin’ It Cool’
…Continues
We’ve carried these flex fans for decades for one simple reason: they work. While obviously not original, they go a long
way toward keeping your cat cool in traffic. The principle is
simple: At low RPM, the highly curved fan blades provide
maximum airflow when needed most. At higher RPM, the
blades flex (hence the ‘flex” name ... ) to a flatter profile to
improve mileage and performance as ram air takes over. Includes flex fan, customer adaptor hub and hardware.
Flex Fan, MK I, MK II, 3.4S/3.8S
17-0776-2
$299.95
Early Saloon Cooling Hose Kits
XKs Unlimited offers complete cooling/heater hose kits made from top-quality reinforced hoses. A perfect winter project to get your sedan ready for summer. Kit prices
are accurate at time of publication but might fluctuate slightly.
MK IX order number 09-1414
340 order number 09-1418
Product Highlight
A highly recommended addition
would be the Evans
Coolant. Please go
to page 6 for full
details on features
and benefits of
changing your
coolant to Evans.
MK II 3.4 TO VIN 175696 & 3.8 TO 212773
order number 09-1399
MK VII to 735526
MK VII from 735527
MK VIII
MK IX
09-1412
09-1412-1
09-1413
09-1414
$56.91
$54.46
$90.47
$39.87
MK I
MK II 3.4 TO VIN 175696 & 3.8 TO 212773
MK II 3.4 175697 TO 179115 3.8 212774 TO222523
MK II 3.4 179116 TO 180034 3.8 222524 TO224588
MK II 3.4 VIN 180035-ON, 3.8 224588-ON & 3.8S
09-1398
09-1399
09-1415
09-1416
09-1417
$75.00
$69.25
$70.23
$73.88
$72.87
34009-1418
$69.94
MK X 4.2 and 420G
09-5025
$87.23
42009-5030
$116.12
Finish off your cooling system “zero time” with a new set of Jubilee or Cheney-style hose clamps.
Jubilee Clamp Kits
Featuring a hex head and made nearly
to the original style, the kerfs do not cut
into the hose. Made in the U.K.
MK II, 3.8S
09-1609
$46.28
34009-1608
$45.52
Cheney Clamp Kit
After years of development and painstaking
research, XKs Unlimited is pleased to introduce
first-class reproductions of the ever-elusive
Cheney-type hose clamps.
MK II, 3.8S
09-8730
$126.23
42009-5031
$47.68
Reduce Bonnet Temperature and Suppress Noise
This custom tailored insulation kit will do
wonders for reducing the surface temperature of the bonnet and under-bonnet
components. Includes: Under-bonnet insulators, firewall insulator, heater box top
insulator, heater box front insulator, heater
fan box insulator.
16-3750
www.xks.com 1-805-544-7864
$200.00
Summer 2015 35
MK II Leaf Springs
If the old girl looks like she’s lost the gravity battle, it might be time
for a set of new leaf springs. Restore proper ride height and handling.
Leaf Spring, Each
CO-10791-2
Pad, Front of Spring, Each
CO-10843
$120.68
$5.46
Note: Springs include end bushings and center pads. Always replace in pairs.
Freshen The Ride With New Suspension Pieces and Hubs
Front Suspension Rebuild Kits
Nothing will put your sedan back on track like a font suspension rebuild. Our kits
include upper and lower A-Arm bushings, upper and lower ball joints, sway bar
end link bushings and mount bushings plus upper and lower ball joint lock tabs
(where applicable) -- everything you’ll need for a complete rebuild. Kit prices are
accurate at time of publication but might fluctuate slightly.
MK VII, MK VIII, MK IX
14-1000
$334.18
MK I, Early (To LHD VIN 990269 -- about 12/58)
14-1900
$293.30
MK I, Later (From LHD VIN 990269 -- about 12/58)
14-1905
$186.40
MK II, Early (Cars with 11/16” Sway Bar)
14-2000-1
$238.26
MK II, Late (Cars with 13/16” Sway Bar)
14-2000-4
$237.04
3.4S, 3.8S, 420
14-2000-4
$237.04
Wire Wheel Splined Hubs
Splined hubs are a wear item with a finite service life. If the individual splines on your hubs are the least bit pointed or sharp,
the hub should be replaced. We’ve worked with the same UK
manufacturer for decades. You will not find better quality hubs.
MK II, 3.4S/3.8S, 420, Right Front
CO-19225-1
$169.75
MK II, 3.4S/3.8S, 420, Left Front
CO-19226-1
$170.28
MK II, Right Rear
CO-13094
$174.91
MK II, Left Rear
CO-13095
$164.99
3.4S/3.8S, 420, Right Rear
CO-20889
$162.96
3.4S/3.8S, 420, Left Rear
CO-20890
$160.26
Two-Eared Knock-Off, Right Side
CO-1102
$62.94
Two-Eared Knock-Off, Left Side
CO-1103
$63.07
Overdrive Buffer
For all MK VII, MK VIII and MK IX. Restricts movement of axle
assembly. These are often “perished” to use the UK parlance.
Sold per each, two required.
For all Sedans with “A”-type overdrive: MK VII, MK VIII, MK IX, MK
I, and non-synchro MK II and
3.4S/3.8S. Made in England,
this buffer keeps movement of the
overdrive unit in check. These are often
attacked by various leaking fluids.
CO-3208
CO-8398
Two shown angles for clarity. Sold individually.
Rear Suspension Upper Bump Stop
36 Summer 2015
$13.61
$20.14
800-444-5247 www.xks.com
NEW Stop Button, Steering Shaft
For later MK II, 3.4S/3.8S, 420, 420G/MK X. It restricts
the movement of the splined steering shaft and
prevents the steering wheel from pulling out of the
column completely. (Always a good thing.) Fitted
to MK II after 151466 (RHD 3.4); 175683 (LHD 3.4);
201087 (RHD 3.8) and 212640 (LHD 3.8).
$19.12
CO-16676
Steering Column
U-Joint
Replacing these joints (or joint for later
cars that use just one) can go a long way
to restoring directional stability. As fitted
to MK I, MK II, 3.4S/3.8S, 420, MK X/420G.
800-444-5247
805-544-7864
$13.74
14-5426
Master Carburetor Restoration Kits
MK VII
Kit prices are accurate at time of publication but might fluctuate slightly.
3.8S, MK VIII & MK IX
MK I, MK II
420
420G/MK X
03-7000
$384.91
03-7004
$331.19
03-7002
$331.94
03-7014 $401.74
03-7016
$614.15
03-7000
If you’re planning to restore your sedan’s carburetors, look no further. Kits include our USA-made rebuild kits, overflow pipes,
our Nitrophyl floats, metering needles, Grose-type jets, dampers, damper springs, float filters, insulation blocks, dashpot and
float chamber screws, damper oil and starting carburetor washers -- everything required to restore your carburetors. Save ten
percent off individual prices. One kit required per car.
Regain The Confidence In Your Brakes
Updated Brake Servo
This is the later “replacement”
type servo that requires about 30
percent less pedal effort than the
standard part. Much less expensive than a rebuilt original. For
MK IX, disc brake MK I, all MK II
and 3.4S to 1B.25285 and 3.8S to
1B.76291.
GR-4258-221
www.xks.com 1-805-544-7864
$249.95
Get your own
Early Saloon
catalogue
This 370 page
book covers the
MK VII, MK VIII, MK
IX, MK I, MK II, 3.8S,
420, MK X and
420G. The most
complete parts
catalog available for these classic cars.
Summer 2015 37
Late Model Jaguar Parts
XJ-S 5.3 V-12
Cooling Hose Kits
If there’s one thing you don’t
want a Jaguar V-12 to do it’s over
heat. Replacing all cooling hoses
is an excellent preventive measure. Our convenient hose kits
make the parts acquisition part
of the job easy.
09-8600
$72.26
105048-18519 (1982-1992) 09-8602
To 105047 (pre H.E.)
$70.38
185820-190527 (1993)
09-8604
$69.17
190528-On (1994)
09-8606
$89.93
Aftermarket Crankshaft
Damper, Later 5.3 V-12 XJ-S
This is a quality, brand new aftermarket crankshaft damper for all XJ-S with the 5.3 liter and
a serpentine belt, which started at engine
8S.57572.
JA-EAC9693/X $247.22
1
XJ-S 5.3 HE Fuel Pipe/Hose Assemblies
The blistering under-bonnet heat of an XJ-S has a nasty habit of cooking things like
wiring and cooling hoses. We highly recommend regular inspection of the fuel hoses
as well. If they are no longer flexible, replacement would be prudent. All of these hoses fit 1981 to 1991 XJ-S HE V-12, VIN 105048 to 179739; they are quality aftermarket
hoses made in the USA. The originals are no longer available from Jaguar.
2
3
4
1 Feed Hose, to Inlet Regulator
JA-CBC7979
$89.95
2 Feed Hose, Inlet Regulator to Rail
JA-EAC9987
$89.95
3 Return Hose, Rail to Outlet Regulator
JA-EAC9986
$89.95
4 Return Hose, Clamped to Outlet Regulator
JA-EAC7938
$69.95
NEW XJ-S Door Seals
We’ve long offered quality aftermarket
door seals for earlier XJ-S coupes, but
owners of convertibles and later coupes have been out of luck since Jaguar
discontinued these items several years ago. We’re happy to report, however, that these items have now been reproduced. The quality is excellent and the price is now realistic. The coupe seals fit cars after VIN
153037 (early 1989) and the convertible seals fit all convertibles
with the exception of the Hess & Eisenhardt conversions.
Coupe, Right
JA-BEC24882
$74.95
Coupe, Left
JA-BEC24883
$74.95
Convertible, Right
JA-HHE5300AA
$74.95
Convertible, Left
JA-HHE5301AA
$74.95
38 Summer 2015
800-444-5247 www.xks.com
SALE Rebuilt Stub Axle Assembly For
1995-1997 “X300” XJ-6
The beauty of this assembly is that it’s plug-and-play: no
shims to fiddle with or clearances to worry
about. Normal list price is $192.30. Refundable $150 core charge.
$139.95
JA-JLM12137/RB
Undertray/Valance
NEW Air Bag Warning Sticker,
XJ, XK Sun Visor
Under Front Bumper, 1995-1997 XJ6/XJR and 1998-2008 XJ8/XJR
Hardware Kit, JA-BEC19939 Undertray/Valance
$11.12
JA-BEC19939/KIT
$4.95
16-1156
$90.52
JA-BEC19939
Originals quickly faded into oblivion. A must if you
show your car or are fastidious about its care. Fitted
to most late 1990s and later. XJ and XK.
XJ-6
Parts
and Trim
800-444-5247
805-544-7864
Available Again XJ-6/
XJ-12 Series III Outer
Door Handle Gasket
Made in the USA, these gaskets can
be installed from the outside so you
don’t have to disturb the fussy-to-adjust lock linkage. Sold per each.
JA-BAC2003
$27.00
Cup not
included
03-1501
Cup Holder Pair, XJ-6 Series III
Simply remove your ashtray inserts and replace them with this kit.
You’ll have individual cup holders for driver and passenger. The inserts employ a simple one-handed adjustable slider to accommodate
cups from 2” to 4” in diameter. Each unit secures to the console with
the two screws formerly used to hold the ashtray assemblies in place.
Fuel Cap Seals for XJ-6/XJ-12
Series I, II and III
Early Type, Leaded Gasoline. Pair
03-1500
$20.00
17-3692
Later Type, Unleaded Gasoline. Pair
03-1501
$20.00
www.xks.com 1-805-544-7864
$49.95
Back in stock and now manufactured by XKs Unlimited -- Fuel Cap Seals for XJ-6/XJ-12 Series I, II and III.
Summer 2015 39
V-8 Upper Timing Chain
with Master Link
Late Model V-8
Under-Bonnet
This is a huge time saver as the chain can
be changed without removing the timing cover. This is the early version of the
upper timing chain. It fits S-Type, XJ8 and
XK8 to Engine 0108122359 (during the
2001 model year.) Two required per car.
$69.86
JA-EAZ1286ML
Hydraulic Engine Mount, XJ8 & XK8
These are excellent aftermarket units that fit all “Series
I” XK8 and XKR from 1997 to 2006 and XJ8 and XJR from
1998-2002. While not a high failure item, all mounts are
considered wear items and the oldest applicable vehicles are 18 years old. Compare at more than $144 from
the dealer.
$79.95
JA-MNC7500AB/X
Late Model V-8
Suspension &
Chassis
1997-2003 XJ-8 Upper Shock
Mount Bushing Kit
NEW Lower Price
XK8 Upper A-Arm
Bushing
Like the XK8 bushings, “Series I” XJ8 (1997 to 2003) upper shock
mounts are a known weak point. Jaguar forces you to
buy a complete mount assembly. This kit is not only
far less expensive, but it’s an upgrade over the factory
pieces. Installation is straightforward (instructions are
included) but note that a hydraulics press is required.
One kit required per car.
JA-MNC2168/69.KIT
One assembly shown. Sold individually, four
assemblies required per car.
JA-MJA1462AB
$29.95 ea.
$95.00
1997-2006 XK8 Spring/Damper Mount
Repair and Upgrade Kit
Factory bushings are made of foam rubber which has proved to degrade over time and cause front
end “chatter” and a loose and sloppy feel. This bushing kit not only repairs a worn set of mounts
but upgrades them to high quality urethane bushings that far outlast originals. Simple assembly
required. Two kits required per car. For all “Series 1” XK8, 1997-2006.
JA-MJA2170BD.KIT
$170.00
800-444-5247
805-544-7864
1998-2002 XJ8/XJR NEW
Aftermarket Upper Shock Mounts
These are a small fraction of the cost from the dealer and replace a
known weak point on the first generation XJ8 and XJR. For cars without
Adaptive Control Damping only.
Right-hand
40 Summer 2015
Left-hand
Right
JA-MNC2168 AF
Left
JA-MNC2169AF $78.78
$78.78
800-444-5247 www.xks.com
Civilized — Aggressive Ride Control
Story and photos by Dave Light
We’ve featured our E-Type ‘XL’ before as one of our project cars.
This time we want to focus on the build-up of that car
a little bit. Our topic is the use of urethane bushings
throughout the front suspension. In the early days of
adapting this material to automotive use the net results insofar as reducing the ’squish’ of the suspension was accomplished nicely. The downside to this
17-6004
adaptation was having a suspension that sounded
like Dr. Frankenstein’s rusty front gate. Many innovators tried, with varying degrees of success,
to work out a means of lubricating the various joints to make the product suitable for daily use.
The E-Type ‘XL’ project car
The real solution came to us in the form of the bushing manufacturers developing the right recipe in the chemical mix of the material. The modern urethane material is as rigid as ever and
produces none of the annoying noises of days gone by.
Polyurethane bushings are truly the best of both worlds. Unlike reproduction bushings, or even originals, they will last the life
of the car and offer unequaled resistance to dry rot, ozone and other environmental factors. Further, they deliver superior performance through less deflection compared to rubber and do not compromise comfort. Nor do they squeak. We’ve sold these
kits for the better part of two decades and have used dozens in our restoration shop. Our Series I & II front kit, 17-6004, includes
upper and lower A-Arm bushings, sway bar end link bushings and sway bar mount bushings.
The bushings are available in whole-car kits or as individual pieces. If you have the suspension torn down we suggest the whole
kits. Or, one could make incremental upgrades as replacement of ancillary bushings
(sway bar mount and links for instance) becomes necessary.
The accompanying photos show one of our technicians, Miguel, assembling the front
end for our E-Type ‘XL’ project car.
Right: Parts to be used
during the assembly
of the front suspension and brakes
Far right: Miguel
begins the bench
assembly of the bushing assemblies
Miguel installs the A-Arm assemblies on the chassis
www.xks.com 1-805-544-7864
The completed left front corner, shown with the Wilwood/XKs Unlimited
(17-1210V) brake upgrade installed as well
Summer 2015 41
SUPER SUMMER SALE
We’re blowing out over-stocks and some odd lots. All items are limited to
stock on hand and cannot be back ordered at this price should we run out.
800-444-5247
805-544-7864
CO-13416
16-0041
17-0722
16-0106
XK-120, XK-140, XK-150
Part Number
CO-3225
Description
BD-36742
E-Type
List Sale
PricePrice
Part Number
Description
List Sale
PricePrice
BD-8569
Support Bracket, Battery, XK-140 OTS & DHC
$171.23 $99.95
BD-37888
Hardtop Bracket, V-12
$105.92 BD-13286/7
Gutter Chromes, Pair, XK-150 FHC
$210.26 $149.95
BD-36742
Gearbox Side Panel, V12, LH
$278.64 $219.95
BD-5092
Seal Channel, RH Hinge Pillar, XK-120 & XK-140 DHC & FHC
$179.25 $139.95
BD-32688
Seat Recline Lever, Early Series II, RH or LH
$68.54 BD-13803
Striker Plate on Door, XK-150
$75.09 BD-37407
Mudshield, LH, V-12
$181.36 $139.95
CO-5728SS
Exhaust Downpipe, LH, XK-120 Dual. Stainless
$158.13 $124.95
BD-37163
Air Vent, RH, V-12
$138.45 $109.95
CO-15275
Air Filter Element, XK-150 “S”
$118.78 $89.95
BD-37164
Air Vent, LH, V-12
$166.15 $129.95
BD-15049
Mount Plate, Later XK-150 Heater
$56.04 $44.95
IT-2210BIS
Center Console Re-trim Kit, Series II, Biscuit
$308.22 $204.95
CO-13416
XK-150 Wiring Connector Cover, Over 10-Way Connector
$42.55 $31.95
19-0012GRY
Sill Trim Kit, Vinyl and Foam, Series I & II FHC & OTS, Grey
$167.62 $149.95
CO-7427
Pulley, Generator, XK-140, Early XK-150, Later MK VII
$152.34 $109.55
19-0012RED
Sill Trim Kit, Vinyl and Foam, Series I & II FHC & OTS, Red
$157.36 $124.95
BD-4327
Boot Stay Rod, XK-120 & XK-140
$92.67 $69.95
CO-3225
Inner Taper Washer, XK-120 Front Bumper
$14.95 $9.95
16-9013
Windshield, E-Type Series III 2+2, Tinted, Triplex
$563.73 $489.95
CO-3831
“Cow Horn” Bracket, XK-120 Front Bumpers
$323.98 $259.95
11-0111
XK-120 Parts Manual Set, 3 Pieces in Orig.-Style Binders
$404.37 $299.95
CO-9288
Heater Core, Later XK-150 With Cable-Operated Valve
$246.66 $199.95
$49.95
BD-9055
B-Post Chrome Finisher, Right, XK-150 DHC
$88.06 $69.95
BD-14009/10
Finisher Pair, Door Shut Face, XK-150 DHC/FHC
$115.29 16-0291
Sun Visor Bracket, XK-150, Three-Hole Version
$24.00 $18.95
CO-13001SS
Exh. Downpipe, LH, Stainless; 140/150 Man. Trans.
$200.43 $159.95
$96.95
CO-33378/33497 Cross Braces, V-12 E-Type; Per Pair
$84.95
$54.95
$193.95 $159.95
BD-24403
Chrome Strip, Edge Of Hinged Boot Extension, 4.2 FHC
$242.21 $194.95
16-2032RH
Shut Face, RH, Series II E-Type FHC & OTS (Not 2+2)
$131.80 BD-29099
Quarter Window Glass, RH, Tinted, V-12 E-Type 2+2
$374.88 $194.95
08-0111RHD
Wiring Harness, Main/Engine, Early RHD 3.8 W/ Fan Relay
$551.58 $324.95
ZZ-3016
Clutch Disc, 3.8 W/ Medatronics 5-Speed Conversion
$74.95
Call To Order
Early Saloons
19-2412SF BLT XK-120 OTS Top, Early Short Type, W/ Plastic Wndw, Blue on Tan$653.44 $239.95
BD-9888
Lock Assembly, MK I & MK II Boot Lid
$168.25 $129.95
19-2415SF BKT XK-150 OTS Top, 58-60, 1 Zipper Plastic Window, Black/Tan
$536.78 $399.95
CO-16324SS
Exhaust Downpipe, RH, MK VIII, Earlier MK IX, Stainless
$130.15 19-2415NSF TAT XK-150 OTS Top, No Plastic Window; Tan on Tan
$513.76 $299.95
BD-9717
Bonnet Chrome, MK II Without Leaper
$90.83 $75.70
CO-5123SS
Tailpipe, Stainless Steel, MK VII
$99.91 $69.98
16-0298
Lock & Key Set, MK VII, MK VIII, MK IX
$101.80 $69.95
BD-25713
Headlamp Bezel, 3.4S & 3.8S Sedans
$165.76 $136.95
BD-9695
Vent Seal, LH, MK I Rear Vent Window, Molded
$258.43 $174.95
CO-5123SS
Tail Pipe, Stainless Steel, MK VII
$99.09 LU-37301/RB
Rebuilt Voltage Regulator, No Core.
MK IX W/ Lucas 22804 Generator.
$205.75 $149.95
14-G450
Spax Shock, Front, 3.4S/3.8S, 420, MK X, 420G, Per Each
$180.61 $142.95
JA-8816P
Caliper Piston (only), Stainless, MK II Rear (1.5”)
$61.18 19-0140
Stowage Bag, Early XK-120 Side Curtains
$239.95 $174.95
16-0446LH
Rear Mud Shield, LH, XK-150
$76.89 $59.95
16-0446RH
Rear Mud Shield, RH, XK-150
$86.95 $69.95
16-0041
Inner Headlamp Ring, XK-120 W/ 7” Lights
$59.95 $41.95
ZZ-3016
Clutch Disc, Medatronics 5-Speed Conversion
Call To Order
19-0140
$89.95
$69.95
$42.95
CO-12812
11-0111
BD-9888
CO-15275
42 Summer 2015
16-0298
19-0004
800-444-5247 www.xks.com
SUPER SUMMER SALE
We’re blowing out over-stocks and some odd lots. All items are limited to
stock on hand and cannot be back ordered at this price should we run out.
800-444-5247
805-544-7864
JA-EAC4527
JA-JLM117187
JA-HMD2549AA
JA-MMD7410AA
XJ-6/XJ12 Series I, II & III; XJ-S
JA-CBC6377
JA-LHE1510AB
Late Model (continued)
JA-XR8-47319
Part Number
Description
List Sale
PricePrice
Part Number
Description
CO-37413
A/C Hose, Receiver/Drier to Evaporator, XJ-6 Series I
$69.00 $31.95
JA-AJ8-2289
CO-42077
Mount Colet, Fuel Injector
$21.01 $12.95
JA-MND2140AD Front Shock, XJ8 Ser I, Non Adaptive, Comfort Suspension
GZ-GT6-2108
GAZ Shock, Front, XJ-6/XJ-12 Series I-III, XJ-S
$124.93 $103.95
17-0750
Car Cover, Technalon, XK-8 Convertible, 1987-2006
$274.93 $204.95
07-FSJR122
RH Muffler, Sleeve Type, Stainless, XJ-6 Series I, Early Series II $100.64 $79.95
17-5743
Car Cover, Technalon, ‘07-On XK8/XKR All
$232.35 $199.95
07-FSJR123
LH Muffler, Sleeve Type, Stainless, XJ-6 Series I, Early Series II $100.64 $79.95
JA-BEC19907/S Mesh Grille, Lower, 1995-1997 “X300” XJ-6
16-4547
Gutter Chrome Set, XJ-6/XJ-12 Coupe, Six Pieces
$358.92 $249.95
04-KT90350
Clutch Kit, X-Type (Disc And Pressure Plate)
$317.54 $199.95
07-FSJR174
Rear Muffler (RH Or LH), Stainless Steel, XJ-6 Through 1975
$178.88 $144.95
JA-DBC10862
Oxygen Sensor, XJ-S 4.0 Liter, VIN 185821 to VIN 195695
$148.48 JA-CAC4566
Header Tank, XJ-S HE 1982-1984 (to VIN 115815)
$315.15 $259.95
08-PFR5G-13E
NGK Spark Plug, XJ8, XK8
$24.82 $10.95
JA-511598
Headlamp Rim, XJ-S, Outer, Four-Lamp System
$47.31 $38.95
17-0749
Car Cover, Poly Cotton, XK-8 Convertible, 1987-2006
$225.96 $199.95
JA-CBC7958*
Catalytic Converter, RHF, XJ-S 5.3 V-12 from VIN 104146.
Not Calif. certified.
14-9309
Rear Shock, KYB, “XJ-40” XJ-6 1988-1994, Non Self-Level
$178.11 $104.95
$415.33 $249.95
17-0264
Bonnet Vents, Chrome W/ Large Surround, 1997-2006 XKR
$285.00 $185.00
17-0778-2
Flex Fan, Fuel Injected XJ-12, Pre-HE XJ-S
$305.47 $189.95
JA-C2C-25336
Brake Rotor Pair, OEM, 326mm, Multiple Non-Supercharged $299.75 $179.95
JA-JLM1982
Ignition Switch, 1990-1991 XJ-6
$116.05 JA-JLM20480
Transmission Seal and O-Ring Kit, ‘98-’02 XJR, ‘97-’02 XKR
$297.55 $184.95
JA-BEC2753
Trunk Finisher, XJ-6 Sovereign,
Vanden Plas & Daimler 1990 (VIN 594576) thru 1992.
$69.69 17-0373
Car Cover, WeatherShield, XK8 & XKR Coupe, 1987-1996
$418.92 $324.95
Late Model
LU-S3121
Starter, “XJ-40” XJ-6, 1988-1994, Lucas Type ($150 core)
$391.55 $195.00
JA-EAC4527
Timing Chain Tensioner, AJ-6/AJ-16 Engines
$25.07 $18.95
JA-C2C-26852
Shock Bushing, S-Type Rear, Lower
$28.60 $19.95
JA-JLM11718
Driveshaft Universal Joint Kit, XJ-S 6.0 V-12 and 1988-1994 XJ-6 $140.08 $60.93
JA-CAC2449-3
A/C Hose, Evaporator to Fuel Cooler, 1978-1982 XJ-S
$180.70 $124.95
JA-HMD2549AA
Bonnet Release Cable, Right Side, XJ-6 Series I, II and III
$79.18 $58.95
JA-LHE1510AB
On-Plug Coil, AJ-16 Engines
$52.77 $39.95
JA-LCA1510AB
On-Plug Ign Coil, Two-Pin Connector,XJ8, XK8, XKR, Aftermarket $133.92 $69.95
JA-XR8-47319
Strut, Bonnet, S-Type 1999-2008
$128.20 $54.95
List Sale
PricePrice
Primary Timing Chain, AJ26 V-8 From 0108130000
$177.98 $109.95
$148.16 $129.64
$285.79 $199.95
JA-HNJ3401AA Door Mirror, LH, 1998-2002, XJ8 w/o “powerpark” feature.
$99.95
$69.95
$49.95
$619.93 $395.00
JA-XR8-57738
Leaping Cat, S-Type Bonnet/Hood
$264.61 $194.95
JA-JLM1131
Ambient Air Temperature Sensor, 1988-1994 XJ-6
$223.30 $149.95
JA-DBC4975
Seat Switch Assembly, LH, 1988-1990 XJ-6
$412.57 $249.95
JA-XR8-58224
Brake Rotor Pair, S-Type Non-supercharged,
V-6 & V-8 from M01613 to N52047 Genuine Jaguar
$263.45 $199.95
17-0368
Center Muffler, High Performance, XK8/XKR 4.2 Liter, 2003-2006$299.95 $259.95
JA-MMD7410AA
Air Conditioning Receiver/Drier, XJ-40 & X300 XJ-6
$113.53 $69.95
JA-MJD6863AA
Cabin Filter, XK8 1997-2006
$76.86 $49.95
JA-C2S-48024
Brake Pad Set, Rear, X-Type, OEM, From E24054
$70.76 $49.95
JA-C2C-36985
Stabilizer Link, Rr Susp, 2nd-Gen XJ-8, S-Type from 2002.5
$89.21 $74.95
JA-XR8-2007
Oxygen Sensor, Lower, S-Type 3.0 V-6 to VIN M45254
$133.16 $73.23 $59.95
JA-XR8-2523
Water Pump, S-Type 4.0 Liter Heater System
$252.12 $179.95
JA-C2C-39468
Anti-Roll Bar Link, Front, 2003-2010 XJ8, 2007-on XK
JA-GJA1730AD
Regulator/Motor, Right Side Window, 1997-2006 XK8/XKR
JA-JLM747
Susp Springs, Rear Pair, XJ-40 With Self Level, To VIN 696458 $551.92 $159.95
17-9770
EBC Rotor Pair, Front, XJ8 & XK8, 305mm
$249.39 $159.95
JA-C2S-20488-S
Mesh Grille, Lower, X-Type
$408.41 $295.00
JA-HNA5502EA/PR Mesh Grille Inserts, “X300” XJ-6 1995-1997
$1,354.08 $795.00
$155.95 $124.95
JA-XR8-27823
On-Plug Coil, S-Type To M45254 (2002.5); XJ8 Ser I 2001-on
$45.37 JA-NAC2215AA
Fan Clutch, XJ-40 6.0 & X-300 6.0 V-12
$218.26 $99.95
$36.79
$99.95
Accessories & Multiple Application
17-2119
XK-120 Refrigerator Magnet, 3-1/4” x 2-3/8”
$4.83 $2.95
17-0196
Inner Tube, 14”
$21.95 $14.95
GR-688382/RB
Sleeved and Rebuilt Dunlop Wheel Cylinder, 1-9/16” ($25 Core) $127.10 17-3569
Battery Minder
17-70476
7” Hella Lamp, H4 “Off Road Use Only”
$77.69 $54.95
17-9955
Enamel Sign, Leaping Cat, 50cm X 25cm
$132.64 $119.95
$84.95
$159.95 $114.95
NGK Spark
Plugs
17-0169
17-9955
17-3569
www.xks.com 1-805-544-7864
JA-JLM361
JA-AJ8-2289
17-0749
Summer 2015 43
Multiple Application & Specialty Parts
Hard To Find… Factory Key Blanks
You know how frustrating it is to get a correct key for your Jaguar; we’ve got a supply of these now. You ought to get
some spares made up. These are uncut blanks.
FA Style
16-6478
$5.46
FP Style
16-6480
$3.82
FS Style
16-6498
$5.59
FT Style
16-6501
$4.46
FA
FT
FP
FS
A New Book
The Jaguar C-Type, D-Type &
Lightweight E-Type Register
The complete histories of Jaguar’s C-Type, D-Type and Lightweight E-Type have now been combined into a
single incredibly detailed volume and it incorporates a wealth of new information that has come to light since
these cars were last treated to a comprehensive update.
Every C-Type, D-Type and Lightweight E-Type is recorded in terms of its chassis, engine, gearbox and body
number, its original color, date of dispatch, distributor and first and all known subsequent owners. The story
of each car is told in detail, including competition appearances and their adventures over the years. The XK-SS
derivative is included in the D-type section, while other well-known E-Types are recorded too. The book includes many tables of statistics and features many previously unpublished color photos.
Bound to become the standard reference work on these cars, this book is highly recommended for all truly
serious enthusiasts and historians of the sports-racing and competition Jaguars from the 1950s and ‘60s.
$109.95
11-9139
E-Type Jaguar DIY
Restoration and Maintenance,
By Chris Rooke
Original Jaguar XK
By Philip Porter
A new third edition of this perennial best seller with
nearly three times as many pages and four times as
many photographs. With over 25,000 sold and five
reprints, this book has established itself as the XK
bible. And now it is even better with new information and 1000 photographs.
11-9008
44 Summer 2015
$89.95
An expert could not have written this book. Experts start
with knowledge and experience, and so inevitably make
assumptions and gloss over important details. Chris Rooke
had played with classic cars before but had never fully
restored one, and knew nothing about E-types. He learned
by trial and error, making mistakes and correcting them.
With admirable courage, he does not hide his mistakes
but details them for the benefit of others. This unique
approach has created a brilliantly useful and very readable
book that really will help you if you want to work on your
E-type or know more about the workings. Brutally honest,
very detailed, 360 pages, over 550 photos.
11-9135
$49.95
E-Type Restoration Book
Motor Books International —
This book was one of our top sellers before it
went out of print several years ago. A small supply
has been located, however, and this invaluable
reference manual is available again. This is not a
coffee-table book but a detailed chronology of
the evolution of the E-Type. The story is told with
hundreds of photographs and a written time line
of changes by production date and chassis and/or
engine number. An absolute must for the serious
E-Type owner or enthusiast.
11-9022
$69.95
800-444-5247 www.xks.com
NEW Jaguar Log Book
Similar to an aircraft log book, our new Jaguar version
makes easy work of documenting all maintenance and
operating information for yourself or a potential buyer.
11-0787
$9.95
IMPORTANT
NEW Improved Stickers
We worked with a domestic manufacturer to improve quality and reduce costs.
Early “Wings” Run-In Sticker, Pre-1963
16-5018E
$9.95
Jaguar Sticker, Multiple Application
16-5023
$4.00
Dunlop Wheel Sticker
16-5024
$5.95
Lucas Battery Sticker, Series II and III E-Type
16-5010
$5.73
WE ARE EQUALLY AS ANXIOUS AS YOURSELF
THAT YOU SHOULD OBTAIN THE BEST PERFORMANCE AND THE UTMOST SATISFACTION FROM
THIS CAR. WE HOPE, THEREFORE, THAT YOU WILL
CAREFULLY OBSERVE THE FOLLOWING
IMPORTANT RECOMMENDATIONS.
DURING THE FIRST 1,000 MILES DO NOT EXCEED 2,500
R.P.M.
DO NOT OVERSTRESS THE ENGINE. USE THE GEARS SO THAT
THE ENGINE RUNS LIGHTLY WITH MINIMUM OF THROTTLE
OPENING.
AFTER 1,000 MILES AND UP TO 2,000 MILES DO NOT EXCEED
3,000 R.P.M. AND CONTINUE TO DRIVE WITHOUT OVERSTRESSING THE ENGINE.
Only if the above recommendations
are observed will the high
performance of with this
car is capable be
obtained.
Jaguar Original Technical Publications on DVD & Web
Carefully reproduced from Jaguar’s archives in the UK and USA, we are pleased to introduce the original Jaguar publications needed to run and maintain your Jaguar or Daimler, including parts catalogs,
service manuals, technical information, owners literature and lots of supplementary model and service
information. While contents vary by title, all provide a wealth of information at a bargain price. What’s
more, each disc now includes an “on-line card” that allows access to the same information on-line (one
device only), meaning you’ll have access to any and all updates and additions forever. We think you’ll
agree these discs are an excellent investment. See our website at http://xks.com/c-202792-books-reference-manuals-parts-service-manuals-on-cd-dvd.html for complete contents lists by title.
SS and Jaguar Saloons, MK V through MK IX, 1936-1961
JA-JTP1001
$74.95
XK-120, XK-140, XK-150, C-Type, D-Type, XK-SS
JA-JTP1002
$74.95
MK I, MK II, 240, 340, 1955-1969
JA-JTP1003
$74.95
E-Type Series I, II and III
JA-JTP1004
$74.95
MK X, 420, 420G and S-Type, 1961-1970
JA-JTP1005
$74.95
XJ-6/XJ-12 Series, I, II and III, 1968-1992
JA-JTP1006
$74.95
XJ-S, XJR-S, XJS, 1975-1996
JA-JTP1007
$74.95
XJ-6 (XJ-40), XJR (XJ-40), XJ12 (XJ81), 1987-1994
JA-JTP1008
$74.95
XJ220, 1991-1994
JA-JTP1009
$74.95
XJ-6 & XJ-12 (X300), 1995-1997
JA-JTP1010
$74.95
XK8 & XKR, 1996-2011
JA-JTP1011
$74.95
XJ8 & XJR, 1998-2002
JA-JTP1012
$74.95
Daimler Variants, 1953-1992 (Excluding XJ Saloons)
JA-JTP1013
$74.95
S-Type, 1998-2008
JA-JTP1020
$74.95
X-Type, 2001-2009
JA-JTP1021
$74.95
XJ8 & XJR, (X350 & X358) 2003-2009
JA-JTP1022
$74.95
XK & XFR, 2008-2010
JA-JTP1023
$74.95
www.xks.com 1-805-544-7864
Summer 2015 45
GR-64325434SS
Two shown
GR-64325809SS
Two shown
GR-64325561SS
GR-64325436SS
Two shown
GR-64325438SS
NEW Stainless Steel Brake Pistons
Just in and now manufactured by XKs Unlimited, these stainless pistons will last virtually forever. The price is now lower, too!
800-444-5247
805-544-7864
Front Outer (Small) Series II E-Type
GR-64325434SS
$25.08
Front Inner (Large) Series II E-Type
GR-64325561SS
$32.90
Front Outer (Small) V-12 E-Type, 420, Series I XJ-6 & XJ-12
GR-64325809SS
$20.24
Front Inner (Large), Series III E-Type, 420, XJ-6 & XJ-12 Series I
GR-64325438SS
$23.24
Rear, Series II and III E-Type, 420, XJ-6, XJ-12, XJ-S without lock ring groove
GR-64325436SS
$20.35
“Jaguar” Boot Motif
Large Bonnet Leaper
This version of the iconic “leaper” bonnet motif is
approximately 7” overall length.
17-0800C
$62.49
Used on a host of Jaguars from the
1960s and 1970s. Excellent quality. Purchase barrel mount clips separately;
three required.
BD-26762
Barrel Mount Clip
BD-25659
$15.45
39¢ ea.
Alloy Timing
Cover for Multiple
Six-Cylinder Applications
Manufactured by XKs Unlimited. At this price it simply
is not worth the time to refurbish a corroded original.
For XK-140 from Engine G.1908; all XK-150; all Series I
E-Type; Series II E-Type FHC and OTS to Engine 7R1914;
Series II E-Type 2+2 to Engine R35388; MK VII from
Engine D.6723 and all N-Series Engines; MK VIII; MK IX;
MK I; MK II; 3.4S/3.8S; 420; 420G/MK X. Must be “decked”
to match height of cylinder block. Sold without studs.
CO-8614/1 $189.95SALE
$159.95
High/Low Horn Pair
Just in, these horns can be used for virtually any
application. While not original, the quality is
great and the price is about half of our former
aftermarket horns. Sold per pair.
08-2500/01
$39.95
Early-Type Remote-Start
Solenoid
08-8000
A very nice reproduction of the early, remote, starter
solenoid. Please note that this part is supplied with a
plain rubber button cover. For the correct cover with the
Lucas “lion” logo, order 18-0026 below.
08-8001
Silicon-Bronze Battery
Terminals
These are the same excellent replicas of the Lucas
“Helmet Head” terminals we use for our assembled
battery cables. Made from silicon-bronze for crisp
detail definition, they solder beautifully.
Positive, Marked “+”
08-8000
$39.95
Negative, Marked “-” 08-8001
$39.95
46 Summer 2015
$39.95
LU-76445
Compact Battery Switch Solenoid
Installs on negative battery terminal to make for a Button Cover
quick disconnect for theft deterrent or storage. For With Lucas Logo
top-post batteries.
17-3565
$9.95
Logo Button 18-0026
$6.50
800-444-5247 www.xks.com
NEW Rebuilt SU Fuel Pumps
Calling these pumps “rebuilt” doesn’t do them justice. “Re-manufactured, improved and restored to perfection” comes
a little closer. All internal components are replaced and all seals and gaskets are ethanol resistant. The Viton diaphragms are exclusive to our rebuilder and are rated to withstand 25 percent ethanol. Finally, all pumps are converted
to pointless style and are 100 percent solid state. In many ways, these pumps are superior to a brand new SU pump
and are cosmetically as new with re-plated hardware and all labels, etc. An excellent value. Core Charges Apply.
A.
C.
B.
A “Square Body” for all XKs, MK VII-MK IX and MK I and II; Positive Ground
03-AUA152/RB
$191.68
A “Square Body” for all XKs, MK VII-MK IX and MK I and II; Negative Ground
03-AUA152N/RB
$181.92
B Round Body, Negative Ground,
Series I E-Type, 420, 420G, MK X (and earlier cars converted to negative ground)
03-AZX1307EN/RB
$189.56
C V-12 E-Type, Carbureted XJ-12
03-AZX1405EN/RB
$343.65
Kit includes
seven core plugs,
seven core plug straps,
Allen-head attaching screws
and even the correct drill and tap!
Drilling and tapping of the
engine block is required.
SALE Engine Block Core Plug Strap Kit
NEW V-12 Crankshaft
Damper Cone
Discontinued by Jaguar but now made by one of
our manufacturers in England.
CO-13892
$54.50
A core plug is one of those little parts that can cause a big problem. These clever little straps are
designed specifically for Jaguar six-cylinder engines and provide an extra measure of security.
Drilling and tapping of the engine block is required. Kit includes seven core plugs, seven core
plug straps, Allen-head attaching screws and even the correct tap! Normal list price is $173.10.
17-3575
$149.95
Back In Production
Hub Puller For All Rear Splined Hubs
This is an updated version of the factory tool that removes splined rear wheel hubs on
both solid-axle and IRS cars. To say it is essential is an understatement; hub removal is
virtually impossible without this tool. Used in our workshop almost daily. This item is
drop-shipped from the manufacturer.
17-J7
$425.00
Dynamat® Sound Deadening Sheets
Our restoration shop uses Dynamat seemingly by the mile. It’s simply incredible stuff that
makes vintage cars like Jaguars much quieter and feel much younger. We apply Dynamat
to the entire interior in some cases, including doors, floors and the roof. Each order
contains three sheets measuring .060” thick and 18” x 32”. Installation takes a little
planning but is simple. Highly recommended.
$69.00
17-3600
Dynamat® Installation Roller
This is a top-quality tool that will last for years.
17-3603
www.xks.com 1-805-544-7864
$22.95
Summer 2015 47
White
Ceramic Mug
XKs Unlimited
‘Pin-Up Girl’ clock
Our new wall clock measures 16” in diameter and is powered by two AA batteries (included). The frame is made of
birch wood and features a sweep second hand. The hands are chrome.
A new piece from XKs Unlimited. This
sturdy designed ceramic mug features
glossy white finish inside and out. The
11 oz. capacity is just right to get the
day off to a great start or wind down
with your favorite bed-time tea. Sold
individually, so get a set of six or eight.
$6.00 each
17-9961
A PLUS for any office, den or workshop.
17-9591
$49.95
The “Safari”
Full-Brimmed
Straw Hat Is Back
We’re pleased to re-introduce the
“Winged” safari sea-straw hat. The crown
is lined to reduce sun contact so protect
yourself during all sorts of outdoor activities with one of these stylish covers.
There’s a comfortable elastic inner head
band and colorful outer band on which
the classic Jaguar “Winged” emblem is
embroidered. Made to fit men’s sized
7½ and larger.
$36.59
17-9930
Original Accessories
Timeless Wrist Watch Designs
Case: 1-1/4” Diameter”
Jaguar Watch
Round Jaguar Watch
Rectangular 17-9504
High accuracy quartz movement.
Mineral crystal scratch-resistant
lens. Luminous hands and hours
markings. Stainless steel bracelet
band, 1 ATM water resistant and
shock proof.
17-9502
$49.95
$39.95
High accuracy quartz movement. Rectangle design metal
case, Italian style, hand-crafted padded and stitched black
leather band.
Case: 1-1/16” x 1-13/32”
CATALOGUES FOR JAGUARS OF EVERY SPOT
Click anywhere here to go to our catalogue order page. Remember the catalogues
are sent no charge postage paid. Coverage from XK-120 - XK8 and more…
48 Summer 2015
800-444-5247 www.xks.com
NEW Magnetic Identity Ovals
Made from UV-protected material that will not fade, yellow
or rub off. Plates are secured magnetically and are easily
removed for washing and waxing; 5” x 3” approximate dimensions.
$7.95
NEW Flag Medallion Key tag
Excellent quality chrome-plated brass with international
emblem. Nicely weighted; 1-1/8” diameter.
Union Jack
Union Jack
17-9088
GB
USA Flag
17-9089
$7.95
USA Flag
17-9090
17-9091
$12.95
17-9092
$12.95
$7.95
Some Nice Union Jack Accessories
Quality License Plate Frames
Most auto parts store license plate frames are, well, junk, to be frank. Our
made-in-the USA stainless-steel frames are available in a variety of finishes
and styles and feature crisp lines and a nice heft. All frames include matching hardware hider caps. It’s time to treat you Jaguar to the best.
Four Hole, Polished Stainless Steel
17-9074
$31.95
Four Hole, Black Powder Coat
17-9076
$29.95
Four Hole, Gold -- Close-Out!
17-9075
$49.95
Two Hole, Polished Stainless Steel
17-9085
$29.95
Two Hole, Black Powder Coat
17-9086
$26.95
Union Jack Frame, Four Hole, Polished Stainless Steel
17-9881
$39.95
“Black Jack” Frame, Four Hole, Black Powder Coat
17-9084
$37.95
4-hole style
‘Union Jack’
‘Black Jack’
2-hole style
Union Jack Valve Stem Caps
We’ve added a black set to our range. Sold in sets of four.
Silver
17-9882
$15.95
Black
17-9087
$15.95
XKs Unlimited Inc SM | 850 Fiero Lane | San Luis Obispo, CA 93401 | U.S.A.
XKs Unlimited is not responsible for typographical errors or errors in pricing and descriptions herein.
Some product photographic depictions have been retouched for clarity. Pricing is good through
August 31, 2015 or while supplies last. 2015©, XKs Unlimited, Inc., San Luis Obispo, CA. This edition
replaces and supersedes any previous. Any reproduction, storage, or use of this document and its
depictions without written authorization is prohibited. All reference to Jaguar™ is provided strictly for
descriptive purposes. XKs Unlimited, Inc.SM is Service Trademarked as an independent Jaguar parts,
restoration and repair source, and has no affiliation with Jaguar Cars, nor any of its holdings.
www.xks.com 1-805-544-7864
SM
Summer 2015 49

SUMMER 2o15 - XKs Unlimited

Transcription

Similar documents

HANDBRAKE COMPENSATOR

Newsletter - The Car Nut

Johnny Tremain by Esther Forbes Objectives

official press kit 2015

BPI 04-03 Brake Hardware Clip Position

45 Plateau Incentive Program

updated master cobra cost sheet .xlsx

2015 Ford F-150 4Wd

compact wheel loaders

Jaguar E-type Forum - New Forest Classic Cars