Placement machines Interactive Grid-Lok selection guide Inspection

Grid-Lok\Home
Interactive Grid-Lok selection guide
Simply hover and click to view the available Grid-Lok options and documents.
Screen Printers
Placement
machines
Grid-Lok Spares
Grid-Lok
Documents
Inspection
Machines
Version 31 OCT 2008
Grid-Lok\Screen Printers\
Screen Printer Grid-Lok selection guide
Click manufacturer to view the available Grid-Lok options
DEK
EKRA
Fuji
Minami
MPM/SpeedLine
Panasonic
Milara
Samsung
Sigmaprint
Speedprint
SMTECH
SJ Inno Tech
Sun East
ERSA
Version 31 OCT 2008
Grid-Lok\Pick and Place\
Pick and Place Grid-Lok selection guide
Click manufacturer to view the available Grid-Lok options
Fuji
Universal
I-Pulse
Mimot
Juki
Panasonic
Samsung
Siemens
Sanyo
Assembleon
Casio
DIMA
Yamaha
Version 31 OCT 2008
Grid-Lok\Vision\
Vision machine Grid-Lok selection guide
Click manufacturer to view the available Grid-Lok options
Viscom
Version 31 OCT 2008
Grid-Lok\Screen Printers\DEK
DEK Grid-Lok selection guide
Click model to view the available Grid-Lok options
DEK 265
GS
GSX
Infinity-all
Horizon-all
Galaxy
Europa
Europa Vi
248
Version 31 OCT 2008
Grid-Lok\Screen Printers\Ekra
Ekra Grid-Lok selection guide
Click model to view the available Grid-Lok options
E4
E5
X4
X5
X5 HSP
X5-36
X6
X6 HSP
Version 31 OCT 2008
Grid-Lok\Screen Printers\MPM
MPM Grid-Lok selection guide
Click model to view the available Grid-Lok options
AP25
AP25 Excel
UP1500
Accuflex
Accela
UP2000
UP2000HiE
UP2000 Elite
Momentum
UP3000HiE
UP3000
AP24X
AP20
AP24
Version 31 OCT 2008
Grid-Lok\Screen Printers\Speedprint
Speedprint Grid-Lok selection guide
Click model to view the available Grid-Lok options
SP200avi
SP210avi
SP200e
SP100
SP880avi
SPRINTavi
Version 31 OCT 2008
Grid-Lok\Screen Printers\Milara
Milara Grid-Lok selection guide
Click model to view the available Grid-Lok options
TP2929
SemiTouch STAV
ST2929
MT2020
Version 31 OCT 2008
Grid-Lok\Screen Printers\DEK\DEK HD
High Density (HD) Grid-Lok options for a DEK
Click here for Standard (GSX) Grid-Lok option
HD System
12“/306mm
18"=457mm
Set with 1 modules
GHD8112-1
GHD8118-1
Set with 2 modules
GHD8112-2
GHD8118-2
Set with 3 modules
GHD8112-3
GHD8118-3
Set with 4 modules
GHD8112-4
GHD8118-4
Set with 5 modules
GHD8112-5
GHD8118-5
Set with 6 modules
GHD8112-6
GHD8118-6
additional module
GHD8112
GHD8118
Note: Machine is integrated using pneumatic input from board clamps.
Click here for DEK technical specification, click here if you are using Pro-Flow.
Version 31 OCT 2008
Grid-Lok\Screen Printers\DEK\DEK Standard
Standard (GSX) Grid-Lok options for a DEK
Click here for High Density Grid-Lok option
Standard System
12“/306mm
18"=457mm
Set with 1 modules
GSX8112-1
GSX8118-1
Set with 2 modules
GSX8112-2
GSX8118-2
Set with 3 modules
GSX8112-3
GSX8118-3
Set with 4 modules
GSX8112-4
GSX8118-4
Set with 5 modules
GSX8112-5
GSX8118-5
Set with 6 modules
GSX8112-6
GSX8118-6
additional module
GSX8112
GSX8118
Note: Machine is integrated using pneumatic input from board clamps.
Click here for DEK technical specification, click here if you are using Pro-Flow.
Version 31 OCT 2008
Grid-Lok\Screen Printers\DEK\DEK Pro-Flow HD
High Density Grid-Lok options for a DEK with Pro-Flow
Click here for Standard (GSX) Grid-Lok options
HD System
12“/306mm
18"=457mm
Set with 1 modules
GHD8612-1
GHD8618-1
Set with 2 modules
GHD8612-2
GHD8618-2
Set with 3 modules
GHD8612-3
GHD8618-3
Set with 4 modules
GHD8612-4
GHD8618-4
Set with 5 modules
GHD8612-5
GHD8618-5
Set with 6 modules
GHD8612-6
GHD8618-6
additional module
GHD8612
GHD8618
optical sensor
077_SBA †
077_SBA †
† Optical sensor required Pro-Flow when software integration not available from DEK
Click here for DEK Pro-Flow technical specification.
Version 31 OCT 2008
Grid-Lok\Screen Printers\DEK\DEK Pro-Flow Standard
Standard (GSX) Grid-Lok options for a DEK with Pro-Flow
Click here for High Density Grid-Lok options
HD System
12“/306mm
18"=457mm
Set with 1 modules
GSX8612-1
GSX8618-1
Set with 2 modules
GSX8612-2
GSX8618-2
Set with 3 modules
GSX8612-3
GSX8618-3
Set with 4 modules
GSX8612-4
GSX8618-4
Set with 5 modules
GSX8612-5
GSX8618-5
Set with 6 modules
GSX8612-6
GSX8618-6
additional module
GSX8612
GSX8618
optical sensor
077_SBA †
077_SBA †
† Optical sensor required for Pro-Flow when software integration not available from DEK
Click here for DEK Pro-Flow technical specification.
Version 31 OCT 2008
Grid-Lok\Screen Printers\MPM\AP
Available Grid-Lok options for a MPM AP25, Excel
Standard System
16“/406mm
Set with 1 modules
GSX1590-1
Set with 2 modules
GSX1590-2
Set with 3 modules
GSX1590-3
Set with 4 modules *
GSX1590-4 *
Set with 5 modules
GSX1590-5
Set with 6 modules
GSX1590-6
additional module
GSX1590
AP25 and Excel require MPM’s Y snugger tooling or Ovations
Quik-Lok option, click here for details.
Click here for technical specification.
* Denotes recommended configuration for machine
Version 31 OCT 2008
Grid-Lok\Screen Printers\MPM\UP1500
Available Grid-Lok options for a MPM Accuflex and UP1500
Standard System
18"=457mm
Set with 1 modules
GSX3918-1
Set with 2 modules
GSX3918-2
Set with 3 modules
GSX3918-3
Set with 4 modules
GSX3918-4
Set with 5 modules
GSX3918-5
Set with 6 modules
GSX3918-6
additional module
GSX3918
optical sensor
077_SBA
Click here for MPM technical specification and
machine integration notes.
Version 31 OCT 2008
Grid-Lok\Screen Printers\MPM\Momentum
Available Grid-Lok options for a MPM Momentum and Accela
Standard System
18"=457mm
Set with 1 modules
GSX3918-1
Set with 2 modules
GSX3918-2
Set with 3 modules
GSX3918-3
Set with 4 modules
GSX3918-4
Set with 5 modules
GSX3918-5
Set with 6 modules
GSX3918-6
additional module
GSX3918
Click here for MPM technical specification and
machine integration notes.
Version 31 OCT 2008
Grid-Lok\Screen Printers\MPM\UP2000
Available Grid-Lok options for a MPM UP2000, UP2000HiE, UP2000 Elite
Standard System
16“/406mm
Set with 1 modules
GSX1590-1
Set with 2 modules
GSX1590-2
Set with 3 modules
GSX1590-3
Set with 4 modules *
GSX1590-4*
Set with 5 modules
GSX1590-5
Set with 6 modules
GSX1590-6
additional module
GSX1590
All UP2000 type machines require MPM’s Y snugger tooling or
Ovations Quik-Lok option, click here for details.
Click here for technical specification.
* Denotes recommended configuration for machine
Version 31 OCT 2008
Grid-Lok\Screen Printers\FUJI\GPX
Available Grid-Lok options for a FUJI GPX Screen Printer
Standard System
16“/406mm
Set with 1 modules
GSX5314-3
additional module
GSX1590
optical sensor
077_SBA
Click here for FUJI technical specification.
Version 31 OCT 2008
Grid-Lok\Screen Printers\Ekra\Ekra HD
High Density (HD) Grid-Lok options for EKRA
Click here for Standard (GSX) option
HD System
12“/305mm
18“/457mm
Set with 1 modules
GHD8712-1
GHD8718-1
Set with 2 modules
GHD8712-2
GHD8718-2
Set with 3 modules
GHD8712-3
GHD8718-3
Set with 4 modules
GHD8712-4
GHD8718-4
Set with 5 modules
GHD8712-5
GHD8718-5
Set with 6 modules
GHD8712-6
GHD8718-6
additional module
GHD8712
GHD8718
optical sensor
077_SBA
077_SBA
2pcs. PCB support bars,
LP SUPP 87
or EBS230
LP SUPP 87
or EBS230
Click here for EKRA HD specific application notes.
Note: X3, X4 and X6 all require the 077_SBA sensor for integration.
Version 31 OCT 2008
Grid-Lok\Screen Printers\Ekra\Ekra Standard
Standard (GSX) Grid-Lok options for EKRA
Click here for High Density (HD) option
Standard System
12“/305mm
18“/457mm
Set with 1 modules
GSX8712-1
GSX8718-1
Set with 2 modules
GSX8712-2
GSX8718-2
Set with 3 modules
GSX8712-3
GSX8718-3
Set with 4 modules
GSX8712-4
GSX8718-4
Set with 5 modules
GSX8712-5
GSX8718-5
Set with 6 modules
GSX8712-6
GSX8718-6
optical sensor
077_SBA
077_SBA
additional module
GSX8712
GSX8718
2pcs. PCB support bars
LP SUPP 87
or EBS230
LP SUPP 87
or EBS230
Click here for EKRA Standard specific application notes.
Note: X3, X4 and X6 all require the 077_SBA sensor for integration.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Universal
Universal Grid-Lok selection guide
Click model to view the available Grid-Lok options
GSM I/II
AdVantis AC-30L
AdVantis AX-72e
AdVantis AI-42e
Genesis GC-30S
Genesis GX-11S
Genesis
GenesisGC-60D
GI-14D
Genesis GI-14D
Genesis GX-11D
Genesis GC-120Q
HSP4796
HSP4797
Version 31 OCT 2008
Grid-Lok\Pick and Place\Fuji
Fuji Grid-Lok selection guide
Click model to view the available Grid-Lok options
CP-643
NXT M3S
NXT M6S
CP-643E
CP-643ME
QP Series
XP Series
Version 31 OCT 2008
Grid-Lok\Pick and Place\Juki
Juki Grid-Lok selection guide
Click model to view the available Grid-Lok options
KE-2050R
KE-2055R
KE-2060R
KE-2070
KE-2080
FX-1R
FX-3
CX-1
Version 31 OCT 2008
Grid-Lok\Pick and Place\I-Pulse
I-Pulse Grid-Lok selection guide
Click model to view the available Grid-Lok options
M2
M3Plus
M4a
M4e
M4s
M6
M6e
M7
Version 31 OCT 2008
Grid-Lok\Pick and Place\Samsung
Samsung Grid-Lok selection guide
Click model to view the available Grid-Lok options
CP40CV
SM Series
Version 31 OCT 2008
Grid-Lok\Pick and Place\Casio
Samsung Grid-Lok selection guide
Click model to view the available Grid-Lok options
Casio 7000-8000
Version 31 OCT 2008
Grid-Lok\Pick and Place\Siemens
Siemens Grid-Lok selection guide
Click model to view the available Grid-Lok options
SIPLACE HS
SIPLACE HF
SIPLACE S
SIPLACE F
SIPLACE C
X Series
Version 31 OCT 2008
Grid-Lok\Pick and Place\Sanyo
Sanyo Grid-Lok selection guide
Click model to view the available Grid-Lok options
TCM 1000
Version 31 OCT 2008
Grid-Lok\Pick and Place\DIMA
DIMA Grid-Lok selection guide
Click model to view the available Grid-Lok options
HP110
Version 31 OCT 2008
Grid-Lok\Pick and Place\Panasonic
Panasonic Grid-Lok selection guide
Click model to view the available Grid-Lok options
CM101
CM212
CM401
CM602
Version 31 OCT 2008
Grid-Lok\Pick and Place\Assembleon
Assembleon Grid-Lok selection guide
Click model to view the available Grid-Lok options
Eclipse
Emerald
Sapphire
Topaz
Opal
AX-201
AX-301
AX-501
MG-1
MG-2
MG-8
Version 31 OCT 2008
Grid-Lok\Pick and Place\Yamaha
Yamaha Grid-Lok selection guide
Click model to view the available Grid-Lok options
YV Series
YG series
Version 31 OCT 2008
Grid-Lok\Pick and Place\Universal\GSM
Available Grid-Lok options for a Universal GSM I, GSM II,
AdVantis, Genesis
Standard System
14”/356mm
Set with 3 modules
GSX3914P-3
Set with 4 modules
GSX3914P-4
Set with 5 modules
GSX3914P-5
Set with 6 modules
GSX3914P-6
additional module
GSX3914P
Please read Universal technical specification before
kit selection.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Universal\GX11S
Available Grid-Lok options for a Universal GX11S
Standard System
16”/406mm
Set with 3 modules
GSX5216-3
Set with 4 modules
GSX5216-4
Set with 5 modules
GSX5216-5
Set with 6 modules
GSX5216-6
additional module
GSX5216
Please read Universal GX11S technical specification before kit selection.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Juki\KE-20XX
Available Grid-Lok options for a Juki KE-20XX
Standard System
18”/457mm
Set with 2 modules
GSX9718-2
additional module
GSX9718
optical sensor
077_SBA
Click here for Juki Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Fuji\Fuji Cp-643
Available Grid-Lok options for a Fuji CP-643, CP-643E,
CP643ME
Standard System
16”/406mm
Set with 1 modules
GSX3916-1
Set with 2 modules
GSX3916-2
Set with 3 modules
GSX3916-3
Set with 4 modules
GSX3916-4
Set with 5 modules
GSX3916-5
additional module
GSX3916
optical sensor
077_SBA
Click here for Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Samsung\CP40CV
Available Grid-Lok options for a Samsung CP40CV
Standard System
14”/355mm
Set with 2 modules
GSX6614-3
Set with 3 modules
GSX6614-4
Set with 4 modules
GSX6614-5
additional module
GSX6614
optical sensor
077_SBA
Click here for Samsung technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Siemens\SIPLACE
Available Grid-Lok options for a Siemens SIPLACE HS, S, F
and C Series
Standard System
14”/355mm
Set with 2 modules
GSX7714-2
Set with 3 modules
GSX7714-3
Set with 4 modules
GSX7714-4
Set with 5 modules
GSX7714-5
additional module
GSX7714
optical sensor
077_SBA
Click here for technical specification.
Note: The machines are integrated using the 077_SBA sensor, 1 is always included in the kit.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Siemens\SIPLACE X
Available Grid-Lok options for a Siemens SIPLACE X Series
and HF
Standard System
14”/355mm
Set with 2 modules
GSX9714-2
Set with 3 modules
GSX9714-3
Set with 4 modules
GSX9714-4
Set with 5 modules
GSX9714-5
additional module
GSX9714
Click here for technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Sanyo\TCM 1000
Available Grid-Lok options for a Sanyo TCM 1000,
TCM 1100 also known as Universal HSP 4796 and HSP 4797
Standard System
16”/406mm
Set with 1 modules
GSX3916-1
Set with 2 modules
GSX3916-2
Set with 3 modules
GSX3916-3
Set with 4 modules
GSX3916-4
Set with 5 modules
GSX3916-5
additional module
GSX3916
optical sensor
077_SBA
Click here for Sanyo TCM 1000 Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Casio\7000-8000
Available Grid-Lok options for a Casio 7000-8000
Standard System
14”/356mm
Set with 1 modules
GSX6614-3
additional module
GSX6614
optical sensor
077_SBA
Click here for Casio 7000-8000 Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Fuji\NXT M3
Available Grid-Lok options for a Fuji NXT M3
Standard System
9”/228.6mm
Set with 1 modules
GSX5309-3
additional module
GSX5309
optical sensor
077_SBA
Click here for Fuji NXT M3 Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Fuji\NXT M6
Available Grid-Lok options for a Fuji NXT M6
Standard System
18”/457mm
Set with 1 modules
GSX5318-3
additional module
GSX5318
optical sensor
077_SBA
Click here for Fuji NXT M6 Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\i-Pulse\M Series
Available Grid-Lok options for I-Pulse M Series
Standard System
14”/355mm
Set with 1 modules
GSX6012-2
Set with 3 modules
GSX6012-4
additional module
GSX6012
optical sensor
077_SBA
Click here for I-Pulse Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Assembleon\GEM Series
Available Grid-Lok options for a Assembleon Eclipse,
Emerald, Topaz, Opal
Standard System
14”/355mm
Set with 1 modules
GSX6614-3
Set with 3 modules
GSX6614-4
Set with 4 modules
GSX6614-5
additional module
GSX6614
optical sensor
077_SBA
Machines suffixed with an X require the sensor for integration.
Those without integrate using the pneumatic input.
Click here for Assembleon Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Yamaha\YV series
Available Grid-Lok options for a Yamaha YV series
Standard System
14”/355mm
Set with 1 modules
GSX6614-3
Set with 3 modules
GSX6614-4
Set with 4 modules
GSX6614-5
additional module
GSX6614
optical sensor
077_SBA
Click here for Yamaha Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Assembleon\M Series
Available Grid-Lok options for a Assembleon MG-1, MG-2
and MG-8
Standard System
14”/355mm
Set with 1 modules
GSX6609-2
Set with 3 modules
GSX6609-3
Set with 4 modules
GSX6609-4
additional module
GSX6609
optical sensor
077_SBA
Click here for Assembleon MG Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Yamaha\YG Series
Available Grid-Lok options for a Yamaha YG series
Standard System
14”/355mm
Set with 1 modules
GSX6609-2
Set with 3 modules
GSX6609-3
Set with 4 modules
GSX6609-4
additional module
GSX6609
optical sensor
077_SBA
Click here for Yamaha YG series Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Assembleon\AX301 AX501
Available Grid-Lok options for a Assembleon AX301 and AX-501
Standard System
18”/457mm
Set with 4 modules
GSX4718-4
Set with 6 modules
GSX4718-6
Set with 8 modules
GSX4718-8
Set with 12 modules
GSX4718-12
Set with 18 modules
GSX4718-18
additional module
GSX4718
optical sensor
003_SEN
AX-301 requires minimum 4 modules connected serially for 1 line of support
AX-501 requires minimum 6 modules connected serially for 1 line of support
Click here for Assembleon A series Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\DIMA\HP110
Available Grid-Lok options for a DIMA HP110
Standard System
9”/229mm
Set with 2 modules
GSX8109-2
additional module
GSX8109
optical sensor
077_SBA
Click here for DIMA HP110 Technical specification.
Version 31 OCT 2008
Grid-Lok\Pick and Place\Panasonic\CM
Available Grid-Lok options for a Panasonic CM series
Standard System
9”/229mm
Set with 2 modules
GSX7509-2
additional module
GSX7509
optical sensor
077_SBA
Click here for Panasonic CM Technical specification.
Note: On CM401 and CM601, 2 kits are needed. On CM402 and CM602, 4
kits are needed.
Version 31 OCT 2008
Grid-Lok\ Screen Printers\MPM\Quik-Lok
Quick-Lok replacement over the top tooling for MPM UP2000
type machines
Part
Number
Description
159_GBC
Quik-Lok with 300mm PCB Clamping blades
200_QLB
1 set (2 pcs) clamping blades 200mm
300_QLB
1 set (2 pcs) clamping blades 300mm
Click here for Quik-Lok Brochure
Version 31 OCT 2008
Grid-Lok\Spares
Grid-Lok spares selection guide
Click selection to view the available Grid-Lok options
Top Caps
Pin repair Kits 1
Pin repair Kits 2
Control Boxes, etc
Fittings 1
Fittings 2
Sensors
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\Top caps
Available module top caps
025_TIP
25 Silicone ESD safe GSX top caps (Except 39mm)
100_TIP
100 Silicone ESD safe GSX top caps (Except 39mm
025_UTP
25 Silicone ESD safe GHD top caps
100_UTP
100 Silicone ESD safe GHD top caps
xxx_TIP
xxx_UTP
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\Pin Repair Kits 1
Pin Repair Kits 1
018_PRK
GSX DEK, Ekra, Siemens, MPM Pin repair kit
114_PRK
Universal 39mm Pin Repair Kit
118_PRK
MPM 39mm Pin Repair Kit
318_PRK
GSX 47mm, 55mm, 60mm Pin repair kit
214_PRK
Assembleon, Yamaha, 66mm Pin repair kit
881_PRK
DEK HD Pin Repair Kit, (25 pins, caps and 3 magnetic strips)
887_PRK
DEK (ProFlow), Ekra, HD Pin Repair Kit, (25 pins, caps and 3 magnetic strips)
018_PRK
114_PRK
118_PRK
318_PRK
214_PRK
881_PRK
887_PRK
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\Pin Repair Kits 2
Pin Repair Kits 2
216_PRK
39mm (Spring up) Repair kit
216_PRK
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\Manifold
Manifold, Power supply, etc.
006_MAN
006_MAN
6 Station Manifold fully fitted
001_DCP
24 Volt Power supply
103_CTL
Grid-Lok control box (mark 2)
002_CON
Hand Controller (mark 2)
003_FIK
Field installation kit
103_PCB
Programmed circuit board
103_VAL
Control Box valve
001_DCP
103_CTL
002_CON
003_FIK
103_PCB
103_VAL
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\sensors
Sensors
077_SBA
Optical Sensor with magnetic base
002_SEN
Optical Sensor (no magnetic base)
003_SEN
Barrel proximity sensor
Picture required
077_SBA
002_SEN
003_SEN
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\Fittings 1
Fittings 1
006_FLO
006_FLO
90 Deg. X 1/4" Tube x 1/8" npt Flow Control (manifold)
006_AFT
90 Deg. X 1/4" Tube x 1/8" npt (manifold)
006_SMF
Qty.: 6 Female Silver Quick Connect
006_RMF
Qty.: 6 Female Red Quick Connect
024_LEA
Twin Tubing w/ fittings
005_SFT
(Qty.: 5) 5/32" Tube x 10-32 Thread Straight Fitting
005_AFT
(Qty.: 5) 5/32" Tube x 10-32 Thread 90 Deg. Fitting
006_AFT
006_SMF
006_RMF
024_LEA
005_SFT
005_AFT
Version 31 OCT 2008
Grid-Lok\Pick and Place\Spares\Fittings 2
Fittings 2
018_FLO
HD Module Flow controller (pack of 5)
018_FLO
Version 31 OCT 2008
Grid-Lok\In progress
Please contact your Ovation representative for
more details on this option
Version 31 OCT 2008
Grid-Lok\Not available
This Grid-Lok configuration not yet available
please contact your ovation representative for
more details
Version 31 OCT 2008
Grid-Lok\unavailable
Grid-Lok is unavailable for this machine type
Version 31 OCT 2008
Grid-Lok\Information
Ovation Products
3864 Courtney Street, Suite 220, Bethlehem, PA 18017.
Telephone +1 484 893 1028
www.ovation-products.com
Navigation buttons kindly provided by www.aaa-buttons.com
Version 31 OCT 2008
Grid-Lok\under construction
This part of the document is still under construction
please check web site for latest version.
www.ovation-products.com
Version 31 OCT 2008
Grid-Lok® GSX1590-X MPM
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.The GSX1590-X is suitable for the MPM
UP2XXX and AP2XXX series Screen Printing machines..
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
159mm
Grid-Lok Tooling Height (Retracted)
137mm
Number of pins, configured in 1 row
16 pins for 406mm/16”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the MPM machines using pneumatic input.
The modules are located on the table using magnets located on the modules.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX3914P-X Universal
Technical Specification
Grid-Lok® is a modular, fully automatic PCB Pin support system for stencil printers, pick and
place machines or AOI applications.
The GSX3914P-X has been optimised specifically for Universal placement machine
application. The system consists of a replacement tooling (See Note) (table) plate for the
machine, which facilitates the instalation your chosen number of 355.6mm (14“) modules. A
special 2 piece module is included for the front part of the machine which is partially obscured
due to machine design.The system consists of five components, modules (in kits and available
seperately), tooling plate controller, manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
39mm
Grid-Lok Tooling Height (Retracted)
6.35mm (body of module is below table).
Except front tooling module 27mm.
Number of pins, configured in 1 row
14 pins for 356mm/14”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the Universal machine range using the pneumatic
input. No external sensor is required.
NOTE
There are 3 tooling plate sizes available from universal. The correct size must be stated at the
time of ordering to ensure kits suitability. The available sizes are 473mmx441mm,
523.87mmx441mm and 371mmx441mm
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX3916-X
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX3916-X is suitable for Fuji CP series placement machines.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
39mm
Grid-Lok Tooling Height (Retracted)
27mm
Number of pins, configured in 1 row
16 pins for 406mm/16”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the Fuji machine ??
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX3916S-X
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX3916S-X is suitable for Sanyo TCM 1000 placement machines and the Universal
HSP4796 and HSP4797.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
39mm
Grid-Lok Tooling Height (Retracted)
27mm
Number of pins, configured in 1 row
16 pins for 406mm/16”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the machine ??
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX3918-X
Technical Specification
Grid-Lok® is a modular, fully automatic PCB Pin support system for stencil printers, pick and
place machines or AOI applications.
The GSX3918-X is suitable for MPM UP1500, Accuflex, Accela and the Momentum. The
system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
39mm
Grid-Lok Tooling Height (Retracted)
27mm
Number of pins, configured in 1 row
18 for the 457mm/18” module
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
Grid-Lok integrates with the MPM UP1500 and the Accuflex using the 077_SBA sensor or the
solenoid valve for the venturi vacuum option if available on the machine. The valve can be
bought separately (SMC VQZ115-5LO-CP) providing the option is available in the software.
The Momentum and the Accela integrate from the solenoid valve used for the venturi vacuum
option.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX4718-X Assembleon
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX6614-X is suitable for Assembleon A series machines, AX-301and AX-501.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
47mm
Grid-Lok Tooling Height (Retracted)
31mm
Number of pins, configured in 1 row
18 pins for 457mm/18”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the machine using the 003_SEN sensor.
For the AX301 kits should be ordered in quantities of 4, 8 and 12 modules. For the AX501 the
kits should be order in quantities of 6, 12 and 18 modules.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX5309-X and GSX5318-X Fuji
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX5314-X is suitable for the Fuji NXT machines 5309-X for the M3 and 5318 for the M6.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
43mm
Grid-Lok Tooling Height (Retracted)
39mm
Number of pins, configured in 1 row
18 pins for 457mm/18” and 9 for 229mm/9”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the Fuji machines ???
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX6012-X I-Pulse
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX6012-X is suitable for the i-Pulse M series machines.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
60mm
Grid-Lok Tooling Height (Retracted)
44mm
Number of pins, configured in 1 row
12 pins for 306mm/12”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the I-Pulse???
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX6609-X
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX6609-X is suitable for Assembleon MG-1, MG-2 and MG-8 placement machines. It is
also suitable for the Yamaha YG series placement machines.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
69.7mm
Grid-Lok Tooling Height (Retracted)
50mm
Number of pins, configured in 1 row
9 pins for 228.6mm/9”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the machine using ???
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX6614-X
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX6614-X is suitable for Assembleon (Eclipse, Emerald Topax, Opal) series placement
machines. It is also suitable for the Yamaha YV (except YV112) series placement machines
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
69.7mm
Grid-Lok Tooling Height (Retracted)
50mm
Number of pins, configured in 1 row
14 pins for 355mm/14”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the machine ranges using the pneumatic input. For
any of the machines suffixed with an X or II will require a sensor.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX6614-X
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX7509-X is suitable for the Panasonic series machines. CM401, CM601, CM402 and
CM602.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
75mm
Grid-Lok Tooling Height (Retracted)
53mm
Number of pins, configured in 1 row
9 pins for 229mm/9”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the CM Series ???
On CM401 and CM601, 2 kits are needed and on CM402 and CM602 4 kits are needed.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX7714-X
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX7714-X is suitable for Siemens SIPLACE HS, S, F and C series placement
machines.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
77mm
Grid-Lok Tooling Height (Retracted)
60mm
Number of pins, configured in 1 row
14 pins for 355mm/14”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the all Siemens SIPLACE machines using the
077_SBA sensor, there is no need to order one as it is included in the kit.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX8109-X DIMA
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX8109-X is suitable for the DIMA HP110 machine.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
81mm
Grid-Lok Tooling Height (Retracted)
59mm
Number of pins, configured in 1 row
9 pins for 229mm/9”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the HP110 ???
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
GSX9714-X Siemens
Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX9714-X is suitable for Siemens X series machines. X2, X3, X4 and X4i and HF series
The system consists of five components, modules (in kits and available seperately), controller,
manifold/regulator, integration sensor and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
97mm/3.8”
Grid-Lok Tooling Height (Retracted)
80mm/3.14”
Number of pins, configured in 1 row
14 pins for 355mm/14”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the X series machines using the included 077_SBA
magnetic sensor
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Grid-Lok®
Technical Specification
GSX9718-X Juki
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The GSX9718-X is suitable for the Juki KE-20XX range of machines.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
97mm
Grid-Lok Tooling Height (Retracted)
75mm
Number of pins, configured in 1 row
18 pins for 457mm/18”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the Juki???
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
HD Grid-Lok® GHD8112-X, GHD8118-X DEK Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
HD Grid-Lok® has been optimised specifically for Printing Machine applications. Increased pin
density reduces the load on underside components during printing, improves print quality and
comforms to any given board profile.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
HD Grid-Lok Tooling Height (Extended)
87mm
HD Grid-Lok Tooling Height (Retracted)
60mm
Number of pins, configured in 2 rows
Pin Pitch
Module width
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
70 pins for 18”/457mm or 52 for 12”/305mm
12mm in X, 18mm in Y
38mm/1.5”
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the DEK machines using the pneumatic input (board
clamps) A sensor is required only when using Pro-Flow and 86mm high modules. Or an
electrical output from the machine provided by DEK as an option.
The modules are located on the table using magnetic strips on the modules
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
HD Grid-Lok® GSX8112-X, GSX8118-X DEK Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
81mm
Grid-Lok Tooling Height (Retracted)
59mm
Number of pins, configured in 1 row
18 pins for 457mm/18” or 12 for 305mm/12”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the DEK machines using the pneumatic input (board
clamps) A sensor is required only when using Pro-Flow and 86mm high modules. Or an
electrical output from the machine provided by DEK as an option.
The modules are located on the table using magnetic strips on the modules
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
HD Grid-Lok® GHD8612-X, GHD8618-X DEK Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
HD Grid-Lok® has been optimised specifically for Printing Machine applications. Increased pin
density reduces the load on underside components during printing, improves print quality and
comforms to any given board profile.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•‘Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
HD Grid-Lok Tooling Height (Extended)
87mm
HD Grid-Lok Tooling Height (Retracted)
60mm
Number of pins, configured in 2 rows
Pin Pitch
Module width
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
70 pins for 18”/457mm or 52 for 12”/305mm
12mm in X, 18mm in Y
38mm/1.5”
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the DEK machines using the pneumatic input (board
clamps) A sensor is required only when using Pro-Flow and 86mm high modules. Or an
electrical output from the machine provided by DEK as an option.
The modules are located on the table using magnetic strips on the modules
The 86mm high modules are designed to support the stencil with the use of Pro-Flow.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
HD Grid-Lok® GSX8612-X, GSX8618-X DEK Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
86mm
Grid-Lok Tooling Height (Retracted)
64mm
Number of pins, configured in 1 row
18 pins for 457mm/18” or 12 for 305mm/12”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the DEK machines using the pneumatic input (board
clamps) A sensor is required only when using Pro-Flow and 86mm high modules. Or an
electrical output from the machine provided by DEK as an option.
The modules are located on the table using magnetic strips on the modules
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
HD Grid-Lok® GHD8712-X, GHD8718-X Ekra Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
HD Grid-Lok® has been optimised specifically for Printing Machine applications. Increased pin
density reduces the load on underside components during printing, improves print quality and
comforms to any given board profile.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
HD Grid-Lok Tooling Height (Extended)
87mm
HD Grid-Lok Tooling Height (Retracted)
60mm
Number of pins, configured in 2 rows
Pin Pitch
Module width
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
70 pins for 18”/457mm or 52 for 12”/305mm
12mm in X, 18mm in Y
38mm/1.5”
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the Ekra machines using the pneumatic input on the
controller. X3, X4 and X6 require the use of 077_SBA sensor. Other machines can use just
the pneumatic input, it is recommended that all machines use the sensor.
LPSUPP87 (EBS230) will need to be ordered seperately if the machine does not already
have board lifters
The modules are located on the table using magnetic strips on the modules.
Note: E4 will require 305mm/12” modules at the front and back rails to achieve full table
coverage.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
HD Grid-Lok® GSX8712-X, GSX8718-X Ekra Technical Specification
Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil
printers, pick and place machines or AOI applications.
The system consists of four components, modules (in kits and available seperately), controller,
manifold/regulator and the operator interface.
Function
Grid-Lok provides full support to the underside of both populated and unpopulated boards. The
systems has two modes of operation
•Stealth’ (Auto) – Dynamically set to each board for every cycle
•Manual – one time set-up using a ‘golden board’
Capability Specification (available options)
Grid-Lok Tooling Height (Extended)
87mm
Grid-Lok Tooling Height (Retracted)
65mm
Number of pins, configured in 1 row
18 pins for 457mm/18” or 12 for 305mm/12”
Pin Pitch
25.4mm/1”
Module width
25.4mm/1”
Controller supply Voltage
Air Supply
Force per pin
Pin Cap material
Supplied mains power supply
5.5bar/80psi
Maximum 20g, typically <5g, configurable.
Electrically conductive silicone rubber
compound. SE67-CON Conductive Silicone
Machine Integration
The Grid-Lok controller integrates with the Ekra machines using the pneumatic input on the
controller. X3, X4 and X6 require the use of 077_SBA sensor. Other machines can use just
the pneumatic input, it is recommended that all machines use the sensor.
LPSUPP87 (EBS230) will need to be ordered seperately if the machine does not already
have board lifters
The modules are located on the table using magnetic strips on the modules.
Note: E4 will require 305mm/12” modules at the front and back rails to achieve full table
coverage.
Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.
www.ovation-products.com
Quik-Lok
TM
Vertrieb Europa - Sales Europe
Ovation Products l 31 Marlborough Avenue l Weymouth l Dorset l DT4 9AN
Paddy Ash l pash@grid-lok.com l Fon: +44 (0) 7917633526 l www.grid-lok.com
„QUIK-LOK“
LP Klemmung für
MPM UP2000/AP HiE
Schablonendrucker
„Quik-Lok“ ist das „over the top“
LP Klemmsystem für Ihren MPM
UP2000HiE bzw. AP HiE Schablonendrucker, der bisher Ihre LP nur mit
Vakuum fixieren kann.
„QUIK-LOK“
PCB clamping for
MPM UP2000/AP
HiE stencil printer
„Quik-Lok“ is the „over the top“ PCB
clamping system for your MPM UP2000HiE
or AP HiE stencil printer, currently equipped
with the vacuum tower to fix the board.
> Komplettes mechanisches Umbaukit ohne
Eingriff in die Maschinensteuerung
> Ersetzt die bisherige Fixierung der LP mit
Vakuum, und garantiert daher absolute Wiederholbarkeit ihrer Druckqualität
> Integrierter Pneumatikverteiler für den Anschluss
eines GRID-LOK LP Unterstützungssystems mit
bis zu 5 Modulen
> LP Klemmung mit 300mm Messerleisten
> Einfachster Einbau innerhalb weniger Stunden
> Optional Umbau des Home Sensors möglich
(mit Original MPM APOPT20 Umbausatz)
> Complete mechanical retrofit kit without
any interference in the machine control
> Replaces the current PCB fixation with vacuum
and therefor ensures absolute repeatability of
your print quality
> Integrated manifold to connect up to
5 Grid-Lok PCB support modules
> PCB clamping with 300mm blades
> Simple installation within 2 hours
> Optionally relocation of the Home Sensor
position might be required
(using the original MPM APOPT20 retro kit)