East West Stone Brochure 2013

Transcription

1
Vol 1 2010
Flooring and Wall Cladding
1. Matted Flagstone
2. Stone Tile
3. Installation Guidelines
Veneer Panels
1.
2.
3.
4.
5.
Natural Ledge
Classic Ledge
Contemporary
Natural Ledge Radius Panel
Installation Guidelines
p. 4
7
p.p.11-14
p.
10–11
p. 15-18
p. 19-20
p. 21-23
p. 12
p. 25-26
p. 14–15
p. 18
p.
p.27
20
p.
28
p. 22–23
Installation
Columns
1.
1.
2.
Laticrete recommended Adhesive p. 29-32
Modular
Ledgestone
p. 24
and
Installation
Guidelines
Installation Guidelines
p. 26
Finishing Touches
1.
2.
3.
4.
Column Cap
Wall Cap
Pool Coping
Wainscot Sill
p. 35
p. 35
p. 28
p. 37
p. 28
p. 37
p. 30
p. 30
To locate the dealer nearest you, contact
East West Stone at 760-603-9898 or visit us
at www.eastweststone.com
Please Note:
To ensure lasting beauty and to protect your stone against
spills and stains, it is recommended to seal all East West
Stone surfaces. Sealants are available at your East West
Stone dealer in either matte or gloss finish to meet your
desired look.
2
*Customer must
must determine
determine appropriate
appropriate use
use for
for any
any natural
natural stone
stone products
products
*Customer
purchased. Natural
stone is a product
nature andare
inherently
unifor-and
purchased.
Gneiss, Quartzite,
Slate, andofTravertine
productslacks
of nature
mity and
is subject
variation
color,
hardness,
strength,
slip resistance,
their
beauty
ascendstofrom
forcesinand
minerals
which
permeate
them. Therefore,
density
bleeding
due to in
iron
content.
Thetexture,
Midnight
Sky material
high
they
areand
subject
to variance
size,
thickness,
color,
hardness,has
sliparesisiron content
prone to
bleeding.
samples
are material
with the has a
tance,
densityand
andisbleeding
due
to iron Any
content.
Thesubmitted
Midnight Sky
understanding
thatand
these
qualities
are inherent
the nature
of the are
product
high
iron content
is prone
to bleeding.
Any insamples
submitted
with the
and are not tothat
be considered
latent
East
West
Stone,
be
understanding
these qualities
aredefects.
inherent
in the
nature
of llc.
thecannot
product
heldare
liable
of action
anddefects.
makes East
no expressed
or llc.
implied
warranty
and
notintoany
because
considered
latent
West Stone,
cannot
be
of merchandise
any of
type
of application.
held
liable in anyfor
cause
action
and makes no expressed or implied warranty
of merchandise for any type of application.
Honey Gold 3
Matted Flagstone
Mat Sizes:
• approximately 5.4 sq. ft., 5/8" thick (44 lbs.)
Suggested Uses:
• patios • pool decks
• walkways • walls
Slate
Autumn Rose
Bayside
Waters
Quartzite
Arctic
Ice
Midnight Sky
*See Table of Contents
Honey
Gold
3
Autumn Rose
Honey Gold
5
Honey Gold
Honey
Gold
6
Tile Sizes:
StoneTile
• 12" x 12"
• 18" x 18"
• approximately
5/8" thick
Suggested Uses:
• patios
• walkways
• backsplashes
• pool decks
• walls
• countertops
Slate
Autumn Rose
Bayside Waters
*Midnight
Sky
M
idnight Sky
Quartzite
Arctic Ice
Honey Gold
*Slate and Quartzite are products of nature and their beauty ascends from natural resources
which permeate them. Therefore, they are subject to variance in size, thickness, texture, and
color. The images shown, simply represent a fragment of the color variation and not the
product as a whole.
Honey Gold7
Autumn
Rose
8
Autumn Rose 9
Flooring and
and Wall
Wall Cladding
Cladding
Flooring
Matted
Flagstone
Suggested
Guidelines
Matted
Flagstone
Suggested
Guidelines
Matted
Flagstone
Suggested
East West Stone’s Matted Flagstone sections are specially Guidelines
engineered with
East West
West
Stone’s
Mattedthat
Flagstone
sections
are
specially
engineered
with
East
Stone’s
Matted
Flagstone
sections
specially
engineered
with
pre-cut
edges
and angles
fit together
likeare
simple
puzzle
pieces. Please
pre-cut
edges
and
angles
that
fit
together
like
simple
puzzle
pieces.
Please
pre-cut
edges and angles
fit together
like simple
pieces. Please
read
all instructions
prior that
to beginning
installation.
A puzzle
latex modified
mortar
read
all instructions
instructions prior
prior to
to beginning
beginning installation.
installation. A
A latex
latex
modified
mortar
Use
latexmodified
modified mortar
all
mortar
isread
recommended.
is
recommended.
recommended
by your dealer.
is recommended.
1. Surface Requirements: Matted Flagstone sections are best installed over a
1. concrete
Surface sub-base
Requirements:
Matted Flagstone
Flagstone
sections
are
best installation
installed over
over
that is a minimum
of 3.5 inches
thick.
Entire
surface
1.
Surface
Requirements:
Matted
sections
are
best
installed
aa
concrete
sub-base
thatand
is aafree
minimum
of 3.5
3.5grease
inchesor
thick.
Entire
installation surface
surface
must
be clean
and flat,
of sealants,
other
compounds.
concrete
sub-base
that
is
minimum
of
inches
thick.
Entire
installation
must be
be clean
clean and
and flat,
flat, and
and free
free of
of sealants,
sealants, grease
grease or
or other
other compounds.
compounds.
must
2. “Dry Layout:” For best results, and to ensure a fast, efficient installation, place
2. the
“Dry
Layout:”
Forthe
best
results,
and to
to area
ensure
fast, efficient
efficient
installation,
place
mats
throughout
DRY
installation
(USING
NO
MORTAR).
Thisplace
will
2.
“Dry
Layout:”
For
best
results,
and
ensure
aa fast,
installation,
the
mats
throughout
the
DRY
installation
area
(USING
NO
MORTAR).
This
will
show
you throughout
how the entire
area will
be covered,
well asNO
confirm
that you
have
the mats
the DRY
installation
area as
(USING
MORTAR).
This
will
show
you
how
the
entire
area
will
be
covered,
as
well
as
confirm
that
you
have
enough
Matted
Consider
numbering
of
show you
how Flagstone
the entire for
areayour
will project.
be covered,
as well
as confirmeach
thatsection
you have
enoughFlagstone
Matted Flagstone
Flagstone
foror
your
project.
Consider
numbering
each section
section
of
Matted
using chalk
masking
tape.
This willnumbering
help you remember
exactly
enough
Matted
for
your
project.
Consider
each
of
Matted
Flagstone
using
chalk
or
masking
tape.
This
will
help
you
remember
exactly
where
mat goes
and
howorit masking
fits together
the adjoining
mats. Referexactly
to
Mattedeach
Flagstone
using
chalk
tape.with
This will
help you remember
where
each
matEast
goes
and Stone
how ititinstallation
fits together
together
with the
the adjoining
adjoining mats.
mats. Refer
Refer to
to
page
11each
for the
West
grid.
where
mat
goes
and
how
fits
with
page
1
1
for
the
East
West
Stone
installation
grid.
page
1
1
for
the
East
West
Stone
installation
grid.
Refer to East West Stone Installation Grid.
3. Spreading Mortar: Once you’re ready to begin laying the mats in place, use a
3. masonry
Spreading
Mortar:
Once
you’re
ready
to
begin
laying
theOnce
mats you’re
in1/2place,
use
Spreading
the
recommended
bybegin
yourlaying
dealer:
ready
trowel
to
spread
an you’re
evenmaterial
layer
ofto
mortar—approximately
inch
thick.
3.
Spreading
Mortar:
Once
ready
the
mats
in
place,
use
aa
masonry
trowel
to
spread
an
even
layer
of
mortar—approximately
1/2inch
thick.
to
begin
laying
the
mats
in
place,
use
a
masonry
trowel
to
spread
an
even
layer
of
the
Spread
the
mortar
out
in
an
area
that
is
slightly
larger
than
the
size
of
your
first
masonry trowel to spread an even layer of mortar—approximately 1/2- inch thick.
recommended
material,
1/2-inch
thick.
Spread
thethe
recommended
material
Spread of
theMatted
mortar
outapproximately
in an
anPlease
area that
that
is that
slightly
larger
than
the
sizeto
ofset
your
first
section
Flagstone.
note
thelarger
mortar
will
begin
(harden)
Spread
the
mortar
out
in
area
is
slightly
than
size
of
your
first
out
in anof
area
that isFlagstone.
slightly larger
than
the that
size of
your
first will
section
of to
Matted
Flagstone.
section
Matted
Please
note
the
mortar
begin
set
(harden)
in
five toof10Matted
minutes.
section
Flagstone. Please note that the mortar will begin to set (harden)
in five
five to
to 10
10 minutes.
minutes.
in
4. Setting
the Flagstone:
Set the
theMatted
MattedFlagstone
Flagstone(in(inthethe
same
position
as your
Set
same
position
as your
dry
4. dry
Setting
the
Flagstone:
Set
therecommended
Matted
Flagstone
(in
theensure
same
position
asbacking
your
layout)
andFlagstone:
firmly
itthe
into
the mortar
bed
to(in
ensure
thatthat
the the
mesh
layout)
andthe
firmly
presspress
it into
material
to
mess
4.
Setting
Set
the
Matted
Flagstone
the
same
position
as
your
dry
layout)
and
firmly
press
it ainto
into
the
mortar
bed stone
to
ensure
that
theIfrecommended
mesh
backing
backing
is embedded
that is
isthe
a between
bond
between
theensure
stone
and the
is
embedded
andfirmly
thatand
there
bond
the
and mortar.
you encoundry
layout)
and
press
itthere
mortar
bed
to
that
the
mesh
backing
is embedded
embedded
and
that there
there
is stone,
bond
between
the that
stone
and
mortar.
you
encounmaterial.
youand
encounter
a low
simply
remove
piece
from
the IfIf
mat
and
add
ter
a lowIfstone,
simply
remove
piece
from
the
mat
and
add
extra
mortar
to
is
that
is
aathat
bond
between
stone
and
mortar.
you
encounter aaarea.
lowrecommended
stone, simply
simply
remove
that
piece
from
the
mat
and
add
extra
mortar
to
extra
the
material
to
that
area.
Replace
the
stone
in the
same
location
that
Replace
the stone
in the
same
location
with
the
added
mortar
and
the
ter
low
stone,
remove
that
piece
from
the
mat
and
add
extra
mortar
to
that
area.
Replace
the
stone
in
the
same
location
with
the
added
mortar
and
the
with
the
added
recommended
material
and
the
stone
will
now
be
the
same
height
as
the
stone
will Replace
now be the same
the location
others. Use
leveladded
or other
straight
edge
that area.
stoneheight
in the as
same
witha the
mortar
and the
stone
will
now
be
the
same
height
as
the
others.
Use
a
level
or
other
straight
edge
others.
Use
a
level
or
other
straight
edge
to
confirm
a
flat
and
uniform
surface
from
one
to
confirm
a
flat
and
uniform
surface
from
one
piece
of
stone
to
the
next.
Gentle
stone will now be the same height as the others. Use a level or other straight edge
piece
of stone
to the
Gentle
tapseffectively
from
large
rubber
will
effectively
take
to confirm
confirm
a flat
flat
andnext.
uniform
surface
fromaone
one
piece
of mallet
stone
to the
the
next.
Gentle
taps
from
a alarge
rubber
mallet
will
take
down
any high
points.
Repeat
to
and
uniform
surface
from
piece
of
stone
to
next.
Gentle
down
any
high
points.
Repeat
steps
#3
and
#4
until
you’ve
covered
all
surfaces
that
do
taps
from
a
large
rubber
mallet
will
effectively
take
down
any
high
points.
Repeat
steps
#3 and
#4 until
you’ve
covered
all surfaces
that
do not
custom
taps from
a large
rubber
mallet
will effectively
take
down
anyrequire
high points.
Repeat
not
require
custom
cutting/fitting
along
borders,
walls
or
edges.
steps
#3
and
#4
until
you’ve
covered
all
surfaces
that
do
not
require
custom
cutting/fitting
along
borders,
or edges.
steps #3 and #4
until
you’ve walls
covered
all surfaces that do not require custom
cutting/fitting along
along borders,
borders, walls
walls or
or edges.
edges.
cutting/fitting
5. Making Templates: Where your Matted Flagstone will butt up against walls or
5. other
Making
Templates:
Where
yourtoMatted
Matted
Flagstone
will
buttlight
up against
against
wallsoror
or
straight
borders,Where
it’s helpful
create Flagstone
a templatewill
(using
cardboard
5.
Making
Templates:
your
butt
up
walls
other straight
straight
borders,
it’s
helpful
to create
create
template
(using
light
cardboard
orto
butcher
paper)borders,
to showit’s
youhelpful
the exact
shapeaaoftemplate
the partial
matlight
section
neededor
other
to
(using
cardboard
butcher
paper)
to show
show
the exact
exact
shape
of the
the partial
partial mat
mat section
section
needed
to
fill
the void.
Simply
place you
ayou
straight
edgeshape
of your
cardboard
along
the wall
and trace
butcher
paper)
to
the
of
needed
to
fill
the
void.
Simply
place
a
straight
edge
of
your
cardboard
along
the
wall
and
trace
the
outline
the area
to abestraight
filled with
partial
section.along the wall and trace
fill the
void.ofSimply
place
edgea of
your mat
cardboard
the outline
outline of
of the
the area
area to
to be
be filled
filled with
with aa partial
partial mat
mat section.
section.
the
6. Cutting
Mat Sections:
Identifythe
thesection
sectionofofa afullfullmat
mat
that
best
Identify
that
best
fitsfits
thethe
areaarea
to to
6. be
Cutting
Mat
Sections:
Identify
the
section
of
full
mat
that best
best
fits
thewall)
area
to
filled.Use
Use
the
templatetoIdentify
to
draw
the
straight
line
(that
corresponds
with
the
wall)
filled.
the
template
draw
the
straight
line
(that
corresponds
with
the
6.
Cutting
Mat
Sections:
the
section
of
aa full
mat
that
fits
the
area
to
be
filled.
Use
the
template
to
draw
the
straight
line
(that
corresponds
with
the
wall)
onto
the
section
of
mat
that
must
be
cut.
Set
the
mat
on
top
of
a
pressed
board
onto
the Use
section
mat thattomust
cut.
Set the
on corresponds
top of a pressed
be filled.
the of
template
drawbe
the
straight
linemat
(that
withboard
the wall)
onto
the section
section
of
mat
that
must
be cut.
cut.
Set
the surface.
matsurface.
on Cut
topCut
of aathe
pressed
board
plywood.
Hold
stone
firmly
against
thethe
cutting
the
marked
or
plywood.
Holdthe
themat
stone
firmly
against
cutting
marked
onto
the
of
that
must
be
Set
the
mat
on
top
of
pressed
board
or plywood.
plywood.
Hold
the stone
stone
firmly
against
the
cutting
surface.
Cut masonry
the marked
marked
Matted
Flagstone
Section
using
a acircular
saw
fitted
with
asurface.
special
masonry
saw blade.
Matted
Flagstone
section
using
circular
saw
fitted
with
a special
saw
or
Hold
the
firmly
against
the
cutting
Cut
the
Matted
Flagstone
section
using
a
circular
saw
fitted
with
a
special
masonry
saw
Spread
the
1/2
inch
layer
of
the
recommended
material
and
set
the
newly
cut
matsaw
blade.
the 1/2
inch using
layer of
mortar saw
and fitted
set the
newly
cut mat
section
MattedSpread
Flagstone
section
a circular
with
a special
masonry
blade.in
Spread
the
1/2steps
inch
layer
of
mortar
and set
set the
the newly
newly cut
cut mat
mat section
section
section
firmly
place
(as
in #3
steps
#3#4).
and #4).and
firmly
placeinthe
(as
in
andof
blade.
Spread
1/2
inch
layer
mortar
firmly in
in place
place (as
(as in
in steps
steps #3
#3 and
and #4).
#4).
firmly
9
99
7.
Allow the recommended
material
beneath your newly-installed
Installing Grout: Allow
mortar beneath
your newly-installed
Matted
Matted Flagstone
for at6least
6 hours
installing
grout.
Prepare
Flagstone
to dry to
fordry
at least
hours
beforebefore
installing
grout.
Prepare
youryour
selected
selected
grout mixture
according
to the directions
the packaging.
the grout
grout
mixture
according
to the directions
on theon
packaging.
WorkWork
the grout
into
intospaces
the spaces
between
piece
of natural
stone
andremove
removeexcess
excessgrout
grout with
with a
the
between
eacheach
piece
of natural
stone
and
wet sponge,
behind
on on
thethe
surface
of the
stone.
Finished
wet
sponge,making
makingsure
surenonogrout
groutis isleftleft
behind
surface
of the
stone.
grouting should
beshould
level with
of the
stone.ofUse
standard
material,
Finished
grouting
be the
levelsurface
with the
surface
theastone.
Usegrout
a standard
and bematerial,
sure to ask
dealer
on grout color choices
to match
grout
andyour
be sure
tofor
askrecommendations
your dealer for recommendations
on grout
your stone.
color
choices to match your stone.
8.
Optional Sealant: To ensure lasting beauty and to protect your stone against
spills and stains, we recommend sealing all East West Stone surfaces. Sealants are
available at your East West Stone dealer in either matte or gloss finish to meet
your desired look.
These are only suggested guidelines. East West Stone, llc. cannot be held liable in any cause of action
and makes no expressed or implied warranty of merchandise for any type of application.
Matted Flagstone Installation Grid
10
Veneer Panels
Panel Size:
Natural Ledge Panel
Rustic, Stacked Stone
Suggested Uses:
• interior walls • exterior walls
• columns
• pools/ spas
• archways
approximately
6" x 24" x .75" – 1.25"
1 sq ft. (13.5 lbs)
• backsplashes
• outdoor kitchens
Slate
Autumn Rose
Midnight Sky
Bayside Waters
Quartzite
Arctic Ice
Honey Gold
*All panels available in Stepped, Double Corner, Mountain Peak
Stepped Corner (6”x12” & 6”x24”), or Finished Ends.
11
11
Quartzite
Arctic Ice
SeaGlass
Honey Gold
Mountain Peak
11
Veneer Panels
Panels
Veneer
Panel Size:
Natural Ledge Panel
Travertine
Rustic, Stacked Stone
Suggested Uses:
• columns
• pools/ spas
• archways
approximately
6" x 24" x .75" – 1.25"
1 sq ft. (13.5 lbs)
• backsplashes
Slate
Autumn Rose
Midnight Sky
*All panels available in Stepped, Double Corner,
Bayside Waters
12
Natural Honey Gold
Natural Midnight Sky
13
Natural Honey Gold
Natural Autumn Rose
Veneer Panels
Classic Ledge Panel
Veneer Panels
Refined, Stacked Stone
Classic
Ledge Panel
Suggested Uses:
Refined,
• interiorStacked
walls Stone
• exterior walls
• columns
Suggested Uses:
• pools/ spas
• backsplashes
• archways
• columns
• pools/ spas
• backsplashes
• archways
Classic Panels:
approximately
6" x 24"x .75" – 1.25"
Classic
Panels:
1 sq ft., (12.5
lbs)
approximately
6" x 24"x .75"Corner
– 1.25"
Stepped
Panel:
1 sq ft., (12.5 lbs)
approximately
Stepped
Corner
6" x 12" x 1.25"
Panel:
6" x 24" x 1.25"
approximately
6" x 12" x 1.25"
6" x 24" x 1.25"
Slate
Bayside
Slate Waters
Bayside Waters
Slate
Slate
Autumn
Rose
Autumn Rose
Midnight Sky
Midnight Sky
Gneiss
Sesame
13
Honey Gold
13
Honey Gold
15
Quartzite
Quartzite
Quartzite
Arctic Ice
Arctic Ice
Honey Gold
Honey Gold
Mountain Peak
Mountain Peak
Sea Glass
Sea Glass
Champagne
14
Glacier White
14
Sandy Rose
16
Classic Seaglass
Honey
Gold
Classic Bayside Waters
16
Honey Gold
Classic Honey Gold
Classic Autumn Rose
17
Veneer Panels
Contemporary Panel
Precision, Beveled Edge
Panel Size:
approximately
6" x 24" x .75"-1.25"
1 sq ft. (10 lbs )
Slate
Autumn Rose
Finished Panel
BaysideWaters
Finished Panel
Midnight Sky
Finished Panel
Quartzite
Arctic Ice
Finished Panel
Honey Gold
Finished Panel
Sea Glass
Finished Panel
Mountain Peak
Finished Panel
19
19
Contemporary Honey Gold
Contemporary Bayside Waters
19
Veneer Panels
Natural Ledge
Radius Panels
Panel Size:
approximately
6" x 24" x .75"–1.25"
1 sq ft. (13.5 lbs)
*Radius Panels are only available in the Natural Ledge
Inside Radius:
Suggested Uses:
• interior curved wall
• exterior curved wall
• backsplashes
• water features
2', 3', 4', 5' and 6'
Autumn Rose
Inside Radius
• pools/ spas
• archway
Outside Radius:
2', 3', 4', 5' and 6'
Contact
Your Dealer
for Available
Colors
Honey Gold
Outside Radius
Mt. Peak
Outside Radius
Midnight
Outside Radius
Autumn Rose
20
21
Fire
Ring
Kit
Veneer
Panels
Panel Size:
KitNatural
Includes:
approximately
Ledge
6" x 24" x .75"–1.25"
• Radius
12” wide, 2’
Outside Radius Wall Caps
1 sq ft. (13.5 lbs)
Panels
(length varies by color, please check with your local
dealer
Inside
Radius:
for availability)
2', 3', 4', 5' and 6'
Suggested Uses:
• interior curved wall
• exterior curved wall
• backsplashes
• water features
• 15 each
2’ Outside
radius panels
• pools/ spas
• archway
Autumn Rose
Inside Radius
Available Colors:
• Arctic Ice
• Autumn Rose
• Bayside Waters
Outside Radius:
2', 3', 4', 5' and 6'
Contact
Your Dealer
for Available
Colors
• Honey Gold
• Midnight Sky
• Mountain Peak
* Available colors vary by region. Please call your local dealer
Honey Gold
for availability
Outside Radius
Autumn Rose
20
Radius Wall Caps
Suggested Uses:
• Benches • Fire Pits • Water features
Sizes:
12” Wide, 2’, 3’, 4’ & 6’ Outside Radius
Colors:
• Arctic Ice • Autumn Rose • Bayside Waters
• Honey Gold • Midnight Sky • Mountain Peak
Honey Gold
Autumn Rose
*Available colors & sizes vary by region.
Please call your local dealer for availability.
23
Honey Gold
21
Veneer Panels
Suggested Guidelines
With East West Stone’s products, it’s fast and easy to build custom veneered columns and stunning, natural stone wainscoting (vertical cladding) applications. Standard sized 6" x 24" veneer panels make it simple to design columns in heights measured to the foot or half-foot. A latex modified
mortar is recommended. Veneer Wainscot
East West Stone’s Modular Veneer Panels can be used to create a beautiful veneer or wainscot on interior or exterior walls. Check with your city or county building department and follow the building code for installation of veneer panels.
1. Do NOT apply over paint or stucco. Make sure your substrate is a clean, rigid surface. For exterior house application, do NOT apply to the scratch coat. You must have a brown coat on top of the scratch coat. 2. Apply layer of mortar to the back of the veneer panel and press
firmly panel
Apply
layer of adhesive recommended by your dealer to the backthe
of panel
the veneer
in place. To ensure maximum adhesion of each panel to the wall surface, use and
press the panel firmly in place. Take the recommended adhesive and apply each
a rubber mallet to tap each veneer
panel
into to
its tap
finaleach
position
making
panel
to the wall surface, use a rubber
mallet
veneer
panelsure that it into its final
is level. making sure that is level.
position
Repeat step #2, adding panels in a linear direction (end-to-end, rather than stacking) to create multiple courses (layers) of panels until the desired height of wainscoting is reached. Do NOT use dry or retamped mortar. This may cause an improper bond.
3. These are only suggested guidelines. East West Stone, llc. cannot be held liable in any cause of action and makes no expressed or implied warranty of merchandise for any type of application.
Panel "A"
Panel "B"
Stepped Panels are designed to interlock together like puzzle pieces. Panel B interlocks into Panel A for a seamless fit.
Stepped Double Corner Panel
Cut the Double Corner Panel in half to make one complete corner. Vary the cuts to avoid an obvious pattern, then notch the cut end to match up to the Stepped Panel. 25
Double Corner Panel cut in half.
Double Corner Panel with notch cuts
Double Corner Panel ready to install
Completed Double Corner Panel
Stepped
Corner
Panel
Stepped
Corner
Panel
Stepped Corner Panel
Suggested Installation:
• Pieces have a stepped end on one side and a corner on the other
• Fits right into the stepped panels without cutting
• Available sizes: 6” x 12” & 6” x 24”
• Alternating the different sizes will stagger the seam and result in
a properly bonded corner
Before
Before
After After
Before
Custom
Veneer
Columns
Custom
Veneer
Columns
After
Suggested
Guidelines
Suggested
Guidelines
Custom
Veneer Columns
Determine
the the
dimensions
of your
column
substrate
and dig
adequate
footing
(according
Determine
dimensions
of your
column
substrate
andandig
an adequate
footing
(according
Suggested
Guidelines
to code)
to support
the mass
and weight
of your
finished
stonestone
veneer
column.
(Note:(Note:
A
to code)
to support
the mass
and weight
of your
finished
veneer
column.
A
standard
x 20.5"
structure
will result
in dig
a 24"
24"xNatural
Ledge
Column.
A
standard
20.5"
x 20.5"
block
structure
will and
result
inanaxadequate
24"
24"footing
Natural
Ledge
Column.
A
Determine
the 20.5"
dimensions
ofblock
your
column
substrate
(according
Classic
Ledge
Panel
Column
will need
a 21.5"
x 21.5"
blockveneer
structure
and a(Note:
Contemporary
to code)
to
support
thePanel
mass
and weight
your
column.
A
Classic
Ledge
Column
willofneed
afinished
21.5"
xstone
21.5"
block
structure
and
a Contemporary
Panel
Column
requires
a 22.5"
x will
22.5"
blockin
structure.)
6"
x 8"
standard
20.5"
xColumn
20.5"
block
structure
a 24"structure.)
x 24"Use
Natural
Ledge
A blocksblocks
Panel
requires
a 22.5"
x result
22.5"
block
Use
6" xx 14"
8"Column.
xprecision
14" precision
build
bothboth
structures.
sure
to
install
steelsteel
rebarrebar
as required
code. code.
ClassictoLedge
Panel
Column
willBeneed
21.5"
21.5"
block
structure
andbya your
Contemporary
to build
structures.
Be asure
toxinstall
as required
by local
your building
local building
making
a
few
cuts
and/or
adding
standard
East
West
Stone
Veneer
Panels,
you
can
easily
Panel By
Column
requires
a
22.5"
x
22.5"
block
structure.)
Use
6"
x
8"
x
14"
precision
blocks
By making a few cuts and/or adding standard East West Stone Veneer Panels, you can easily
construct
magnificent
or custom-sized
columns.
to build
both
structures.
Be standard
surestandard
to install
rebar stone
as required
by your local building code.
construct
magnificent
orsteel
custom-sized
stone
columns.
By making a few cuts and/or adding standard East West Stone Veneer Panels, you can easily
Once your desired concrete block column has been constructed, you’re ready to begin
your desired
concrete
block column
been constructed, you’re ready to begin
constructOnce
magnificent
standard
or custom-sized
stonehas
columns.
adhering the natural veneer panels to the block using mortar.
adhering the natural veneer panels to the block using mortar.
Once your desired concrete block column has been constructed, you’re ready to begin
1. the
Working from
the bottom
of the
column upward,
coat the concrete block with a 1/2adhering
veneer
to the
block
mortar.
1. natural
Working
frompanels
the bottom
of theusing
column
upward, coat the concrete block with a 1/2inch plus layer of mortar, covering slightly more than the width of each veneer panel.
inch plus layer of mortar, covering slightly more than the width of each veneer panel.
1. Working from the bottom of the column upward, coat the concrete block with a 1/22. plus
Apply
layer mortar,
of mortar
to the slightly
back ofmore
the veneer
panel
andofpress
the
panelpanel.
firmly in place.
inch
layer
covering
than
the
width
each
veneer
layer
ofofadhesive
recommended
bytoyour
toand
thepress
back
of
the
veneer
2.ToApply
Applyof
layer
mortar
to
the
back panel
of the
veneer
panel
panel
firmlypanel
in place.
ensure
maximum
adhesion
of each
the dealer
concrete
block,
usethe
a heavy
ruband
press
the
panel
firmly
in
place.
Take
the
recommended
adhesive
and
apply
each
To
ensure
maximum
adhesion
of
each
panel
to
the
concrete
block,
use
a
heavy
rubmallet
to taptoeach
veneer
panelveneer
into itspanel
final and
position
making
surefirmly
that itinisplace.
level.
2. Apply ber
layer
ofmallet
mortar
the
backveneer
of
press
theveneer
panel
panel
to theto
wall
surface,
usethe
a panel
rubberinto
mallet
to tap
each
panel
into it
itsisfinal
ber
tap
each
its final
position
making
sure that
level.
To ensure
maximum
adhesion
of
each
panel
to
the
concrete
block,
use
a
heavy
rubposition making sure that is level.
ber
to step
tap each
veneer panel
into itsaround
final position
making
sureinthat
it is level.direction.
3. mallet
Repeat
#2, wrapping
the panels
the block
column
a clockwise
3.Natural
Repeat
stepand
#2,Classic
wrapping
thePanels
panelsfeature
arounda the
block
column
a clockwise
direction.
Ledge
Ledge
unique
design
that in
forms
natural lookNaturaljoints.
LedgeContinue
and Classic
Ledge
Panels(layers)
featureofapanels
uniqueuntil
design
that
forms
natural looking
corner
adding
courses
the
top
of
the
column
3. Repeat step #2, wrapping the panels around the block column in a clockwise direction.
ing corner
joints.
Continue
courses (layers)
panels
until the top of the column
is reached.
Finish
each
column
byadding
adding
layerofof
mortar
Natural
Ledge and
Classic
Ledge
Panels
featurea agenerous
unique design
that
forms(approximately
natural lookis reached.
each
column
by adding
a generous
layer of mortar (approximately
1-inch
thick)Continue
onFinish
whichadding
to set
your stone
column
cap. until
ing corner
joints.
courses
(layers)
of panels
the top of the column
1-inch thick) on which to set your stone column cap.
is reached. Finish each column by adding a generous layer of mortar (approximately
1-inch thick) on which to set your stone column cap.
only suggested
guidelines.
East of
West
Stone, llc.for
cannot
be held
liable in any cause of action
and These
makes are
no expressed
or implied
warranty
merchandise
any type
of application.
Honey Gold
Stepped
Double
Honey
Gold
Corner
Panels
Stepped
Double
Honey
Gold
Corner Panels
Stepped Double
Corner Panels
26
26
26
Columns
Modular Ledgestone
Column
Columns Sizes:
approximately 18"x18"x12" (170 lbs.)
Slate
Autumn Rose
Midnight Sky *See Table of Contents
Bayside Waters
Quartzite
Honey Gold
Arctic Ice
27
Columns
Modular Ledgestone Column
Suggested Guidelines
Before starting the installation of your Modular Ledgestone Columns, refer to your local building code to ensure that your project complies with all construction requirements. 1. Dig a footing for each column according to code.
2. masonry trowel (insert steel rebar according to code). Allow concrete to set up and dry for twenty four hours before continuing to step #3.
3. Apply mortar to the area on top of the concrete footing where the column will be located. Set the first section of your Modular Ledgestone Column on top of the mortar making sure that the column section is level. This will be the first course.
4. Stack the next column section (second course) on top of the first course. To ensure a close, stone to stone fit between each column section, a light grinding of both the top and bottom may be required. Coat (parge) the inside joint of the column section with mortar to prevent water seepage when grouting. Repeat step #4 for each section.
5. DO NOT APPLY MORTAR to the surface of the column where the next column section will be placed.
6. Stack the Modular Ledgestone Column sections to your desired height.
7. Fill (grout) the space inside the column with concrete, adding steel rebar according to code. 8. Finish column by setting a matching 21" x 21" x 2" column cap on a 1/2" bed of mortar.
These are only suggested guidelines. East West Stone, llc. cannot be held liable in any cause of action and makes no expressed or implied warranty of merchandise for any type of application.
28
Thin Veneer Installation
This guide gives you the basic overview of materials and
installation guidelines for your East West Stone Thin Veneer
project. These guidelines do not encompass all project conditions, nor do they replace general installation knowledge.
For more assistance on designing with thin veneers visit East
West Stone at http://eastweststone.com.
For more information on LATICRETE® installation
materials visit www.laticrete.com/mvis
Trimming and Prep Perhaps the most efficient method
for trimming thin veneer is through the use of a 4” (1 cm)
angle grinder equipped with a diamond blade† (figure A). Cuts
made at an angle from the back (sawn) side at 1/2” (12 mm)
depth will allow the stone to be “snapped” with a small hammer along the cut line leaving a natural edge on the front side.
Ensure units are clean of laitance, loose concrete, and any film
that could impede bond.
Substrate Prep For moisture and air infiltration protection, coat the substrate with LATICRETE® Air and Water
Barrier. First, verify that the substrate is properly prepared
and fully cured. Apply 1 coat at 0.015” – 0.022 and allow to
fully cure (Figure B). Apply a second coat. The Air and Water
Barrier will go from a light sage green to a darker olive
green when fully cured. Seal and make air and water tight all
penetrations through the Air and Water Barrier, including
mechanical anchors, brick ties, furring strips, finish cladding
supports and other penetrations.
Setting Use a flat trowel to key a thin coat of LATICRETE
Hi Bond Masonry Veneer Mortar to cover entire back of
the veneer units (figure C). Spread additional mortar onto
the back of the skim coated veneer sufficient to completely
fill the space between the veneer and the substrate when
compressed against the substrate Press the mortar covered
back of the veneer against the substrate at the desired final
position. Slide the unit roughly 1” (25 mm) diagonally while
maintaining even pressure (figure D). Take care to keep the
joints between the stones consistent and to stagger the
vertical joints. Remove excess mortar from the joints prior
to setting the next piece (figure E). Periodically pull a piece
of stone off the wall to ensure 100% coverage of the mortar
between the stone and the substrate (figure F).
Installation of East West Stone
with the Laticrete MVIS System
East West Stone recommends the use of the LATICRETE MVIS
installation system for all interior and exterior applications of stone
panels. By using MVIS, as an owner, architect, contractor, or
homeowner, you will receive the following benefits:
l
l
l
l
l
l
l
The only comprehensive labor and materials warranty in the indus
try against delamination and water intrusion
A history of success backed up with independent testing and over
56 years of vertical stone installation success
Unmatched adhesive strength to the substrate
The fastest installation method available for vertical stone
Adjustability during installation for creating that perfect look
Fully factory-controlled installation products for guaranteed
consistent performance in every application
Experienced team of technical sales and service representatives available to help with installation questions
East West Stone recommends the use of LATICRETE® MVIS™
for all thin stone Veneer installations over both masonry construction and steel or wood framed construction.
Backed by the LATICRETE 15 and 25 Year System Warranties*,
LATICRETE MVIS delivers a faster, more accurate platform for our
natural thin stone veneer lines and ensures an uncompromised
standard of quality.
Over masonry construction
25 Year System Warranty
* See Data Sheet 025.0SPD for complete warranty information or visit www.laticrete.com/mvis.
Square foot quantities reflect raw material coverage only, exclusive of any manipulation of the stone itself. Final results will vary depending on joint width and installation style.
^ All technical service calls are recorded and returned within a maximum 24 hour time frame.
Over steel or wood framing
15 Year System Warranty
Honey Gold
Midnight Sky
Natural Arctic Ice
Bayside Waters
25
Mt. Peak
8
Mt. Peak
35
29
Natural Bayside Waters
/ Planter Cap
Available in hand Chiseled Edge one side or Smooth Bullnose one side.
Your choice of: Slate (Autumn Rose, Midnight Sky, or Bayside Waters)
or Quartize (Arctic Ice, Honey Gold, or Mt. Peak).
* Chiseled Edge
Planter Caps
37
* Smooth Bullnose Pool Coping
(only available in a 12”x24”)
* Contact your dealer for available colors.
Autumn Rose
31
Honey Gold
32
Natural Ledge Mountain Peak
760-603-9898 • www.eastweststone.com

East West Stone Brochure 2013

Transcription

Similar documents

Hardscaping Installation Manual

Natural Ledge Panel

Inspiring Surface Design

The beauty of stone, the simplicity of siding.

October 30, 2000

How to use a pestle and mortar

On letterhead

Stone Source - Trinity Logistics

Laminate - Amtekco Industries, Inc.

View Event Flier - Click Here