NX Boats

Transcription

NX Boats
NX Series
Center
Console
Demand Value
Ve r s a t i l e , A f f o r d a b l e , R e l i a b l e
3
SV Series
Center
Console
9
FX Series
Flats Boat
15
CCR Series
Skiffs
19
CC Series
Skiffs
27
To u g h , w e l l b u i l t , s t r a i g h t f o r w a r d b o a t s .
Sensible boats for serious fisherman.
2
NX21 Console
NX Boats
Wire Conduit
What is the boat of the future? It will run offshore with ease. It will have a shallow draft to
fish the back bays. It will get great fuel mileage, measured as miles per gallon not gallons
per mile. The future is now.
The new Sundance NX Series boats are here today. The NX boats have a 30 degree
entry to cut through heavy chop for serious off shore duty. The hull transitions to a long
planing pad and 7 degree transom with a notched pocket tunnel for incredible fuel efficiency. And they all draft 9 inches or less.
Insulated Cockpit &
Rod Holder Drains
Insulated
Wells
The boats are available in many eye catching colors and you can even order your boat
with custom colors. Rigid rub rails with stainless steel insert is standard. We have loaded
the boats with features like hydraulic steering on the 21 foot and larger boats. All have
stainless steel flush pull-up cleats, 10-micron fuel filters and waterproof circuit breakers.
The entire boat is foam insulated for sound and temperature control.
A closer inspection reveals more attention to the details such as windshield and console
handrails are rigged with quick attachments so they can be removed or lowered, allowing
boat and trailer to clear a standard garage door. In the cockpit, the gunwale-mounted rod
holders are equipped with drainage tubes to prevent water from ending up in the bilge. All
the boats have multiple options for bait wells, fish ice boxes or live release wells.
And all our boats are backed by a comprehensive 10 Year Transferable Limited Warranty.
The NX Series, true hybrid inshore offshore boats ....
the NeXt generation of boats.
Rigid Rub Rail with
Stainless Trim
Optional
Leaning Post
Optional Front & Rear Bolsters
Optional Fresh
Water System
Tackle Station
NX25 NX23
NX25 aft lounge
PREMIUM FEATURES
● ALL COMPOSITE-NO WOOD construction
● 10 YEAR Transferable Warranty
● Foam Injected Fiberglass Stringer System
● Marine tinned wire by Ancor & Almo
● Cored Molded Non-Skid Inner Liners
● ISO-NPG Gel Coats by HK Research
● 316 grade Stainless Steel Fasteners
● Circuit Breaker Electrical Protection
● Hand Laid Hulls and Vacuum Infused Lids
4
NX25
SPECIFICATIONS
Length
25 - 1”
Beam
99”
Transom Ht.
25”
Approx. Weight
2,735 Lbs.
Fuel Capacity
72 gal.
Maximum H.P.
300 H.P.
Recommended H.P.
250 H.P.
Dead Rise
7o
Draft
9”
Inside Height
24 / 30”
feature highlights
●Flush Spring Cleats
Rub Rail w/ S.Steel Insert ●
Optional Coaming Cushions ●
Locking Bow Compartment ●
Large Anchor Locker ●
Flush Bow Cleat ●
Built In Step ●
Walk In Console ●
Cushioned Jump Seats ●
Flush Mount Spring Cleats ●
6 Gunwale Rod Holders ●
5
●Fold Down Swim Ladder
●Round Insulated Bait Well
●Aft Lounge & Bolsters
●Glove Box & Cup Holders
●Hydraulic Steering
●Leaning Post
●120qt Insulated Fish Box
●Round Insulated Bait Well
NX21
SPECIFICATIONS
Length
21’ - 1”
Beam
97”
Transom Height
25”
Approx. Weight
1,850 Lbs.
Fuel Capacity
45 Gals.
Maximum H.P.
150 H.P.
Recommended H.P.
115 H.P.
Dead Rise
5o
Draft
9”
Inside Height
20” / 27”
feature highlights
Flush Mount Spring Cleats●
Rub Rail w/ S.Steel Insert ●
Optional Coaming Cushions●
Locking Bow Compartment●
Large Anchor Locker●
Flush Bow Cleat●
Trolling Motor Plug●
Insulated Console Well●
Console Seat w/ 2 Cushions●
●Aft Spring Cleats
●Fold Down Swim Ladder
●Fishing Chair Seat Bases
●Large Battery Compartment
●Hydraulic Steering
●68 Qt. Round Insulated Bait Well
●Standard Flip Flop Seat
Optional Leaning Post shown
●2 Cup Holders
4 Console Cup Holders●
●100 Qt. Insulated Fish Box
6 Console Rod Holders●
●Fold Down Windshield
and Hand Rail
4 Gunwale Rod Holders●
6
NX19
SPECIFICATIONS
Length
18’ - 10”
Beam
91”
Transom Ht.
20”
Approx. Weight
1,475 Lbs.
Fuel Capacity
29 Gals.
Maximum H.P.
115 H.P.
Recommended H.P.
90 H.P.
Dead Rise
7o
Draft
7”
Inside Height
19 / 23”
Optional Leaning Post shown
feature highlights
Flush Mount Spring Cleats●
●Aft Spring Cleats
Rub Rail w/ S.Steel Insert ●
●Fold Down Swim Ladder
Optional Coaming Cushions●
Locking Bow Compartment●
Large Anchor Locker●
Flush Bow Cleat●
Trolling Motor Plug●
Insulated Console Well●
Console Seat w/ 2 Cushions●
2 Console Cup Holders●
6 Console Rod Holders●
7
4 Gunwale Rod Holders●
●Glove Box
●2 Cup Holders
●Fold Down Windshield
and Hand Rail
●Standard Flip Flop Seat
Optional Leaning Post shown
●68 Qt. Round Insulated Bait Well
NX17
SPECIFICATIONS
Length
17’ - 2”
Beam
90”
Transom Ht.
20”
Approx. Weight
1,350Lbs.
Fuel Capacity
29Gals.
Maximum H.P.
90 H.P.
Recommended H.P.
70 H.P.
Dead Rise
7o
Draft
7”
Inside Height
19 / 23”
Optional Leaning Post shown
feature highlights
Rub Rail w/ S.Steel Insert ●
Optional Coaming Cushions●
Locking Bow Compartment●
Large Anchor Locker●
Flush Bow Cleat●
Trolling Motor Plug●
Insulated Console Well●
Console Seat w/ 2 Cushions●
2 Console Cup Holders●
●Aft Spring Cleats
●Fold Down Swim Ladder
●Glove Box
●2 Cup Holders
●Fold Down Windshield
and Hand Rail
●Standard Flip Flop Seat
Optional Leaning Post shown
●68 Qt. Round Insulated Bait Well
●2 Gunwale Rod Holders
6 Console Rod Holders●
8
SV Boats
Master patterns cut by robotic CNC machines
Want the most versatile bay boats on the market? The Sundance SV Series center console boats are for you. These boats are adaptable to both fresh water and saltwater and can
be used inshore or offshore. The aggressive 17 to 19 degree dead rise hulls have 2 lifting
strakes and a wide reverse chine. They strike a good balance between rough water performance and shallow draft.
The AKS Hull has a small air step on the keel directly below the console. With a very long
planing pad behind the AKS you get under 3 second hole shots with very little bow lift. The
long planing pad gets the boat on top of the water for a shallower running draft.
Planing pad and keel step
Stainless steel thur-hulls
and brass seacocks
There is no wood in our boats. We build with proven all composite materials including urethane core transoms, molded fiberglass stringers and cored decks. Our hatches are resin
infused for precision lay up. The whole boat is foam insulated for sound and temperature
control and makes her virtually unsinkable. We back our boats with a 10 Year Transferable
Limited Warranty.
Insulated
console
well
Optional
areation
The wider beams and higher freeboard make for a completely dry and self bailing deck.
These boats are a fisherman’s dream with large casting platforms and multiply live well options, rod holders and storage options.
If you are looking for a bay / off shore fish boat that can handle a tournament or a family
outing, take a close look at the SV Series from Sundance.
SV Panel
Vacuum Assisted Resin
Transfer Molding
Optional
Wheel
Foam insulated cockpit & wells
Drains on rod holders
9
PREMIUM FEATURES
● ALL COMPOSITE-NO WOOD construction
● 10 YEAR Transferable Warranty
● Foam Injected Fiberglass Stringer System
● Marine tinned wire by Ancor & Almo
● Cored Molded Non-Skid Inner Liners
● ISO-NPG Gel Coats by HK Research
● 316 grade Stainless Steel Fasteners
● Circuit Breaker Electrical Protection
● Hand Laid Hulls and Vacuum Infused Lids
SV171
SV186
SV205
SV23
All Sundance Boats are Factory Pre-Rigged with Reliable Yamaha Outboards.
Combine the durability of Sundance Boats with the legendary reliability of Yamaha Outboards, and you’re in
for quite an experience. We chose to partner exclusively with Yamaha for it’s outstanding customer satisfaction - winning the Marine Industry Customer Satisfaction Index Award every year it’s been presented and
most recently, a J.D. Powers Award for highest customer satisfaction.
10
SV23
SPECIFICATIONS
Length
23’ - 1”
Beam
98”
Transom Height
25”
Approx. Weight
2,150 Lbs.
Fuel Capacity
72 Gals.
Maximum H.P.
250 H.P.
Recommended H.P.
250 H.P.
Dead Rise
19o
Draft
14”
Inside Height
22”
Boat pictured with optional leaning post
feature highlights
4 - S.S. Rod Holders●
Insulated Fish Box●
Hydraulic Steering●
Custom Gauge Panel●
Optional Leaning post ●
Aerated Center Bait Well●
Locking Glove Box●
Locking Console Door●
6 S.S. Rod Holders●
Large Battery Compartment●
Flush Mount Spring Cleats●
Rub Rail w/ S.Steel Insert●
●Locking Side Compartments
●Large Bow Casting Deck
●Trolling Motor Plug
●Locking Bow Compartment
●Anchor Locker
●Flush Mount Front Cleat
●Insulated Well under Seat
or Optional Aerated Bait Well
●Windshield with Grab Rail
●4 S.S. Console Cup Holders
●Flush Mount Spring Cleats
SV205
SPECIFICATIONS
Length
20’ - 5”
Beam
98”
Transom Height
25”
Approx. Weight
1,850 Lbs.
Fuel Capacity
45 Gals.
Maximum H.P.
200 H.P.
Recommended H.P.
150 H.P.
Dead Rise
17o
Draft
12”
Inside Height
20”
feature highlights
4 S.S. Rod Holders●
Insulated Fish Box●
Hydraulic Steering●
Custom Gauge Panel●
Standard Flip Flop Seat●
Aerated Center Bait Well●
Locking Glove Box●
Locking Console Door●
6 S.S. Rod Holders●
Large Battery Compartment●
Rub Rail w/ S.Steel Insert●
●Locking Side Compartments
●Large Bow Casting Deck
●Trolling Motor Plug
●Locking Bow Compartment
●Flush Mount Front Cleat
●Anchor Locker
●Insulated Well under Seat
or Optional Aerated Bait Well
●Windshield with Grab Rail
●4 S.S. Console Cup Holders
●SS Spring Cleats
12
SV186
SPECIFICATIONS
Length
18’ - 6”
Beam
90”
Transom Height
25”
Approx. Weight
1,450 Lbs.
Fuel Capacity
40 Gals.
Maximum H.P.
150 H.P.
Recommended H.P.
115 H.P.
Dead Rise
17o
Draft
11”
Inside Height
19”
Optional Bait
Well in SV
Console
feature highlights
Rub Rail w/ S.Steel Insert●
Large Bow Casting Platform●
Locking Bow Compartment●
Anchor Locker●
Flush Mount Front Cleat●
Insulated Well under Seat●
or Optional Aerated Bait Well
Trolling Motor Plug●
●Large Battery Compartment
●Locking Glove Box
●Standard Flip Flop Seat
●Custom Gauge Panel
●Stainless Destroyer Wheel
●No Feed Back Steering
Windshield with Grab Rail●
●Aerated Bait Well
4 S.S. Console Cup Holders●
●SS Spring Cleats
6 S.S. Rod Holders●
13
●2 S.S. Rod Holders
SS Spring Cleats●
SV171
SPECIFICATIONS
Length
17’ - 1”
Beam
90”
Transom Ht.
20”
Approx. Weight
feature highlights
Rub Rail w/ S.Steel Insert●
Large Bow Casting Platform●
Large Storage Well●
Flush Mount Front Cleat●
Trolling Motor Plug●
Windshield with Grab Rail●
Triple Rod Racks●
1,250 Lbs.
Fuel Capacity
34 Gals.
Maximum H.P.
115 H.P.
Recommended H.P.
90 H.P.
Dead Rise
17o
Draft
11”
Inside Height
18”
SV171 uses FB Console
●SS Spring Cleats
●Large Battery Compartment
●Standard Flip Flop Seat
●Custom Gauge Panel
●Stainless Destroyer Wheel
●No Feed Back Steering
●Aerated Bait Well
SS Spring Cleats●
14
FX Console
Flush Cleats & Pole Holders, SS Rub Rail, 3D Decals
FX Boats
Sundance has been refining the skiff concept for over 16 years and
we simply could not fathom why Light Tackle Flats and Technical
Poling skiffs were so expensive. So we decided to build our own.
We proudly offer you our newest line of boats - the FX Series Flats
Boats.
Optional Back Rest to replace Pole Platform
These are true technical poling skiffs with a 10 degree dead rise at
the transom. We eliminated the hull strakes and did a very mild reverse chine to minimize hull slap noise while still maintaining a certain crispness to the steering feel.
Like our other skiff series, the FX Boats are built with our proven IBeam construction system. This solid glass and foam system creates an incredible strong hull and a also makes a very quiet hull
when scooting across the grass flats.
Rear Deck Bait and Release Wells
The FX series has a molded inner liner, and multiple insulated bait
and release wells. The poling platform, flush mount cleats and push
pole holders are standard equipment and every boat is factory rigged
with a Yamaha outboard and Yamaha PowerMatched components
and propellers.
And all our boats are backed by a comprehensive 10 Year Transferable Limited Warranty to protect your investments for years to
come.
FX Console insulated well (optional aeration)
Foam I Beam construction on FX Boats
9 ft. Rod Holders under Gunwales
15
FX19 Vapor
FX17 Flicker
16
FX17 Flicker
SPECIFICATIONS
Length
17’ - 1”
Beam
77”
Transom Ht.
20”
Approx. Weight
890 Lbs.
Fuel Capacity
18 Gals.
Maximum H.P.
70 H.P.
Recommended H.P.
70 H.P.
Dead Rise
10o
Draft
7”
Inside Height
12”
feature highlights
Rub Rail w/ S.Steel Insert ●
●SS Spring Cleats
Wide Gunwale Walkways●
●Large Storage Well
Flush Mount Pole Holders●
●Std Poling Platform
Large Casting Deck●
Anchor Locker●
Flush Bow Cleat●
Insulated Console Well●
Trolling Motor Plug●
Console Seat w/ 2 Cushions●
6 Console Rod Holders●
4 Gunwale Rod Holders●
17
●Windshield & Hand Rail
●Aerated Bait Well 100 Qt
●Cushion Seat & Back Rest
●No Feed Back Steering
●Stainless Wheel
●Aerated 100 Qt Release Well
F X 1 9 VA P O R
SPECIFICATIONS
Length
19’ - 1”
Beam
83”
Transom Ht.
20”
Approx. Weight
1,020 Lbs.
Fuel Capacity
31 Gals.
Maximum H.P.
150 H.P.
Recommended H.P.
90 H.P.
Dead Rise
10o
Draft
6”
Inside Height
13”
feature highlights
Rub Rail w/ S.Steel Insert ●
Wide Gunwale Walkways●
Flush Mount Pole Holders●
Extra Large Casting Deck●
Large Well & Anchor Locker●
Insulated 100 Qt Well●
Flush Bow Cleat●
Insulated Console Well●
Trolling Motor Plug●
Console Seat w/ 2 Cushions●
●SS Spring Cleats
●Large Storage Well
●Std Poling Platform
●Windshield & Hand Rail
●Aerated Bait Well 100 Qt
●Cushion Seat & Back Rest
●No Feed Back Steering
●Stainless Wheel
●Aerated 100 Qt Release Well
6 Console Rod Holders●
4 Gunwale Rod Holders●
18
We started Sundance in 1993 with the desire to build the best shallow draft fishing skiffs
available and to do it for a reasonable price.
Skiff Boats
To accomplish this we needed light weight hulls to maximize the power to weight ratio so we could use lower horsepower engines.
Smaller engines weigh less, cost less, use less fuel and require smaller fuel tanks. And we needed extraordinary planing efficiency to
get the desired performance from these engines.
How do you make a hull both lighter and stronger? You add more stringers. Stringers are like floor joist,
the closer the spacing the stiffer the floor. A typical power boat has four stringers running fore and aft. Adding more conventional stringers
would make it stronger. But it would also make the boat much heavier and more expensive.
Sundance engineers developed the I-Beam Stringer using foam preforms to build the
stringer system during hull lay up. The advantages are a fore and aft stringer every six
inches. And the stringers, hull and floor are laid up at the same time and cure together
for a perfect primary bond. This balanced sandwich construction makes an incredible
strong stiff hull using less material and less labor. Sundance I-Beam hulls are stiffer,
stronger and lighter, with more rigidity per pound than traditional lay up methods.
We build with woven and stranded fiberglass and high
density urethane foam for an all composite "No Wood"
construction.
Along with strength we wanted uncompromising safety. Our
boats are virtually unsinkable. The half boat picture is the aft
section of an F19 hull. The five men have a combined weight of 1,125 lbs. The boat is sitting level in the water
and you can clearly see most of the six-inch thick foam preforms. The boat is drafting three inches. That's
unsinkable safety!
We spent years addressing ride and spray concerns. Our new "Posi-Grip, No-Trip" hull design has minimized these problems. By moving the outer chine inward, the boat will lean into a turn. No other flat bottom
does this. And with multiple turning rails on the bottom, our boat will turn smoothly and with little side slip at
any reasonable speed. Our new SRV bow sends spray laterally and away from the boat and the "No-Trip"
chine lets spray fully exhaust to the side, not forward. Other skiffs trap spray between the chine and when
the boat slaps, it sneezes the spray forward. No other skiff runs as dry or turns as well as a Sundance.
Better performance, more standard features, Sundance is the Best Skiff at the Best
Price and the only skiff backed with a 10 Year Transferable Warranty
19
Which Sundance Skiff is right for you? First pick your size - Series K, F or B.
F Series
K Series
g Our smaller boats
g 64” Beam Width
B Series
g Narrower Beams
g Our regular boats
g Standard Beams
g Our larger boats
g Wider Beams
g 50” Floor Width
g 76” Beam Width
g 65” Floor Width
g 94” Beam Width
g 80” Floor Width
g 19” Gunwales
g 13” Gunwales
K14
g Taller sides - 22”
K16
F17
F19
CCR
B22
B20
B18
Then pick a finish level...either CCR or CC
CC
CCR
● Full ring cap connects front and rear decks
● Rigid rub rail with stainless steel insert
● Choice of 3 rub rail colors - Grey, White or Black
● Choice of 4 hull colors plus any custom color you pick
● Stainless steel deck hardware
● Upgrade NX Console standard on B Series
● 3D rigid decals in chrome or black chrome
● Fold down windshield and hand rail standard on B Series
● Rod holders under gunwale on B Series
CC
● Separate front and rear decks
● Semi rigid rub rail with vinyl insert
● Rub rail color is Lazer Blue
● White hull color
● Mylon deck hardware
● FB Console
● Vinyl decals
20
Leaning Post w/ Rod Holders & Cooler
Standard Flip Flop Cooler Seat
CCR Series
Built Right.. The first time
(1) first to build skiff V Bow (1994)
(2) first to incorporate a floor sump in a skiff (1995)
(3) first fuel side fill in a skiff (1995)
(4) first all composite urethane transom core (1997)
(5) first to move the chines in to make the skiff drier (2002)
(6) first to build a full ring cap liner on a skiff. (2005)
(7) first skiff to use all 316 grade stainless fasteners (2006)
F CCR Front Deck
(8) first skiff to use all Deutsch electrical connectors (2007)
B CCR Front Deck
(9) first and Only Skiff to offer a 10 Year Warranty ( 2008)
For over 16 years...the true skiff innovators.
316 stainless steel
Deutsch Connectors
Optional Cooler and Cushions in front of FB Console
NX Console Seat w/ Insulated Well (Optional Aeration)
F19 CCR Rear Deck w/ Aerated Bait Well
21
B22CCR
SPECIFICATIONS
Length
21’ - 10”
Beam
94”
Transom Height
25”
Approx. Weight
1,685 Lbs.
Fuel Capacity
33 Gals.
Maximum H.P.
150 H.P.
Recommended H.P.
115 H.P.
Draft
6”
Floor Width
80”
Inside Height
22”
B22CCR with standard NX Console
feature highlights
Rod Holders Under Rail ●
Standard NX Console for B-CCR Boats
Standard insulated front storage well or
optional aerated bait well
●Flush Mount SS Spring Cleats
Flush Mount SS Spring Cleats●
●Stainless Rod Holders
Cushioned Jump Seats●
●Optional Swim Ladder
Large Bow Casting Deck●
●Battery & Storage Well
Insulated Well under Seat●
Flush Mount SS Front Cleat●
Bow Storage Compartment●
Windshield with Grab Rail●
Trolling Motor Plug●
Storage under Jump Seats●
●Cup Holders & Glove Box
●Below Floor Rigging Tube
●CCR molded Splash Well
●Custom Gauge Panel
●No Feed Back Steering
●72 Qt. Cooler Seat
●NX Console w Rod Racks
Rub Rail w/ S.Steel Insert ●
22
B20CCR
SPECIFICATIONS
Length
19’ - 10”
Beam
94”
Transom Height
25”
Approx. Weight
1,525 Lbs.
Fuel Capacity
33 Gals.
Maximum H.P.
130 H.P.
Recommended H.P.
90 H.P.
Draft
6”
Floor Width
80”
Inside Height
22”
Rod Racks under CCR gunwale rail
Rod Holders Under Rail ●
Flush Mount SS Spring Cleats●
Cushioned Jump Seats●
Large Bow Casting Deck●
feature highlights
●Flush Mount SS Spring Cleats
●Stainless Rod Holders
●Optional Swim Ladder
●Battery & Storage Well
●Cup Holders & Glove Box
Insulated Well under Seat●
●Below Floor Rigging Tube
Flush Mount SS Front Cleat●
●CCR molded Splash Well
Bow Storage Compartment●
●Custom Gauge Panel
Windshield with Grab Rail●
Trolling Motor Plug●
Storage under Jump Seats●
Rub Rail w/ S.Steel Insert ●
23
●No Feed Back Steering
●72 Qt. Cooler Seat
●NX Console w Rod Racks
B18CCR
SPECIFICATIONS
Length
17’ - 10”
Beam
94”
Transom Height
20”
Approx. Weight
1,355 Lbs.
Fuel Capacity
33 Gals.
Maximum H.P.
90 H.P.
Recommended H.P.
75 H.P.
Draft
6”
Floor Width
80”
Inside Height
22”
feature highlights
Flush Mount SS Spring Cleats●
Rod Holders Under Rail ●
Cushioned Jump Seats●
●Flush Mount SS Spring Cleats
●Battery & Storage Well
●Cup Holders & Glove Box
Large Bow Casting Deck●
●Below Floor Rigging Tube
Insulated Well under Seat●
●CCR molded Splash Well
Flush Mount SS Front Cleat●
●Custom Gauge Panel
Bow Storage Compartment●
●No Feed Back Steering
Windshield with Grab Rail●
Trolling Motor Plug●
Storage under Jump Seats●
●72 Qt. Cooler Seat
●NX Console w Rod Racks
●Stainless Rod Holders
Rub Rail w/ S.Steel Insert ●
24
F19CCR
SPECIFICATIONS
Length
18’ - 9”
Beam
76”
Transom Height
20”
Approx. Weight
1,190 Lbs.
Fuel Capacity
24 Gals.
Maximum H.P.
90 H.P.
Recommended H.P.
70 H.P.
Draft
6”
Floor Width
65”
Inside Height
19”
Boat shown with optional leaning post and igloo
cooler and cushions in front of console
feature highlights
Optional Leaning Post
●S.S. Rod Holders
Rub Rail w/ S.Steel Insert ●
Stainless Steel Spring Cleats●
Large Bow Casting Deck●
Flush Mount Front Cleat●
Bow Compartment●
Windshield with Grab Rail●
25
●Large Battery Compartment
●Custom Gauge Panel
●Dash Power Point
●CCR molded Splash Well
●No Feed Back Steering
●72 Qt. Cooler Seat standard
●Console Fuel Tank w side Fill
Trolling Motor Plug●
●Triple Rod Racks
Deck Steps●
●Aerated Bait Well
F17CCR
SPECIFICATIONS
Length
16’ - 9”
Beam
76”
Transom Height
20”
Approx. Weight
1,070 Lbs.
Fuel Capacity
24 Gals.
Maximum H.P.
70 H.P.
Recommended H.P.
60 H.P.
Draft
6”
Floor Width
65”
Inside Height
19”
Below shown with optional Bow Rails
feature highlights
Rub Rail w/ S.Steel Insert ●
Stainless Steel Spring Cleats●
●S.S. Rod Holders
●Large Battery Compartment
●Custom Gauge Panel
Large Bow Casting Deck●
●Dash Power Point
Flush Mount Front Cleat●
●CCR molded Splash Well
Bow Compartment●
Windshield with Grab Rail●
●No Feed Back Steering
●72 Qt. Cooler Seat
●Console Fuel Tank w side Fill
Trolling Motor Plug●
●Triple Rod Racks
Deck Steps●
●Aerated Bait Well
26
K16CC
SPECIFICATIONS
Length
15’ - 9”
Beam
65”
Transom Height
20”
Approx. Weight
680 Lbs.
Fuel Capacity
10 Gals.
Maximum H.P.
50 H.P.
Recommended H.P.
40 H.P.
Draft
5”
Floor Width
50”
Inside Height
13”
Below shown with optional Seat Deck Plate on front deck
Aerated Bait Well●
Console Fuel Tank with side Fill●
No Feed Back Steering●
feature highlights
●Trolling Motor Plug
●Large Bow Casting Deck
●Bow Compartment
●4 side cleats and bow chocks
48 qt. Cooler Helm Seat●
Custom Switch Panel●
Double Rod Racks●
Large Battery Compartment●
27
●Windshield with Grab Rail
●Vinyl Rub Rail
K16FLX
Go to www.sundanceboats.com to see the F17, F19, B18, B20 and B22 CC Models
SPECIFICATIONS
Length
15’ - 9”
Beam
65”
Transom Height
20”
Approx. Weight
680 Lbs.
Fuel Capacity
10 Gals.
Maximum H.P.
50 H.P.
Recommended H.P.
40 H.P.
Draft
5”
Floor Width
50”
Inside Height
13”
feature highlights
● Large Battery Compartment
Vinyl Rub Rail●
● Fuel Tank with side Fill
Large Bow Casting Deck●
Bow Compartment●
4 side cleats & bow chocks●
Windshield with Grab Rail●
Trolling Motor Plug●
● No Feed Back Steering
● Custom Switch Panel
● Double Rod Racks
● Aerated Bait Well
28
6
775
1380
6
775
1380
6
790
1400
6
790
1400
8
1160
1900
8
1160
1900
8
1320
2100
8
1320
2100
S
S
S
S
S
S
S
O
O
S
O
S
O
O
S
O
S
O
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
RO
O
O
O
O
O
O
O
O
O
O
S
S
S
O
O
O
O
O
S
S
S
O
O
O
O
S
S
S
O
O
O
O
O
S
S
S
O
O
O
O
S
S
S
O
S
S
O
O
O
O
RO
O
O
O
O
O
O
S
O
S
O
RO
O
O
O
O
O
O
O
O
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
O
O
O
O
S
S
S
O
S
S
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
S
O
13
13
15
15
15
15
15
15
15
15
15
15
15
15
10
S
Sg
10
S
S
21
S
S
21
S
S
18
S
pS
21
S
S
21
S
S
18
S
S
34
S
S
34
S
q Sp
34
34
S
S
S p S
34
S
S
34
S
S
notice or incurring any obligations. Specification and measurements are approximate and subject to variancesAll Rights Reserved.
Revised Oct 1, 2010. Confirm all specification and options with your Dealer prior to purchase.
S = Standard O = Optional RO
= Recommended Option
29
O
S
S
S
O
O
5
5
S
30
S
S
S
S
S
5
5
O
S
S
S
S
S
4
S
5
4
6
S
40
S
S
O
O
S
O
O
S
6
2
S
40
S
S
32
O
O
S
S
S
S
S
4
S
5
S
O
O
S
O
O
O
S
S
S
S
S
4
S
5
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
O
S
S
S
O
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
S
O
S
S
S
S
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
S
40
S
S
6
2
S
40
S
S
32
O
4
1
O
O
O
O
O
O
O
O
O
4
1
O
O
O
O
O
6
B22CCR
S
O
O
S
O
O
S
40
S
S
6
2
S
40
S
S
32
O
B22CC
5
S
O
O
S
O
O
S
40
S
6
B20CCR
5
S
40
S
6
B20CC
S
O
O
S
O
O
S
40
S
4
B18CCR
O
S
S
S
O
O
6
4
B18CC
K16T
5
F19CCR
6
775
1380
F19FLX
5
640
1200
S
O
O
S
O
O
F19CC
S
O
5
640
1200
S
O
O
S
O
O
F17CCR
S
O
5
640
1200
S
40
S
F17FLX
4
475
980
S
40
S
6
2
S
40
S
6
2
S
30
S
F17CC
4
475
980
S
6
6
K16FLX
F40LA F40LA T60TL T60TL T60TL F70LA F70LA F70LA F70LA F70LA F90TX F90TX F115TX F115TX
Fishing Hardware & Plumbing
Rod Racks under Ring Cap
Rod Holder Racks on Console
Rod Holders (SS) on G'wales
Insulated Well - port side aft
Size in Qts.
Raw Water Aeration
Insulated Console Well
Size in Qts.
Raw Water Aeration
Installed Hardware & Accessories
Skiff Rub Rail - Lazer Blue
S
Rigid Rub Rail w/ SS trim
White, Grey or Black Rub Rail
Console Windshield & Handrail
Quick Remove Windshield
Quick Remove Console Rail
SS Cup Holders on Console
Starboard Glove Box
Black Cleat Thru-Bolted
5
Stainless Cleats
Flush Mount Bow Cleat
ALL Flush Mount Cleats
Transom Swim Platform
O
SS Split Bow Rail
O
SS Stern Rail
O
SS Side Rail
O
Electrical & Plumbing Systems
Bow Light 9" removable
S
Stern Light 52" folding
S
Nav Light Storage under Deck
S
2 Switch Electrical Panel
S
4 Switch Electrical Panel
Yamaha Tach, Fuel & Volt
Marinco Power Point on dash
Trolling Wire Kit (6 AWG)
S
Battery Selector Switch
O
Battery Tray
S
Auto Bilge Pump
S
Aerator Pump
Aerator Hi-Speed PickUp
Tops
Bimini Top w/ Boot
O
Tee Top
Sunbrella Mooring Cover
O
Sunbrella Console Cover
O
K16CC
18-9 17-10 17-10 19-10 19-10 21-10 21-10
76"
94"
94"
94"
94"
94"
94"
65"
80"
80"
80"
80"
80"
80"
20"
20"
20"
25"
25"
25"
25"
1190 1295 1355 1470 1525 1590 1685
0
0
0
0
0
0
0
6"
6"
6"
6"
6"
6"
6"
24
33
33
33
33
33
33
19"
21"
22"
21"
22"
21"
22"
90
90
90
130
130
150
150
70
70
70
90
90
115
115
K14T
18-9
76"
65"
20"
1100
0
6"
24
18"
90
70
B22CCR
18-9
76"
65"
20"
1100
0
6"
24
18"
90
70
B22CC
F19FLX
16-9
76"
65"
20"
1070
0
6"
24
19"
70
60
B20CCR
F19CC
16-9
76"
65"
20"
975
0
6"
24
18"
70
60
B20CC
F17CCR
16-9
76"
65"
20"
975
0
6"
24
18"
70
60
B18CCR
F17FLX
15-9
65"
50"
20"
680
0
5"
10
13"
50
40
B18CC
F17CC
15-9
65"
50"
20"
680
0
5"
10
13"
50
40
F19CCR
K16FLX
Specifications
Length Overall
13-9 15-9
Beam
65"
65"
Floor Width (at Transom)
50"
50"
Transom Height
20"
20"
Weight (No Fuel or Engine)
525
595
Dead Rise (degs at Transom)
0
0
Draft
5"
5"
Fuel Capacity
10
10
Interior Height (at Transom)
13"
13"
Max Horsepower
40
50
Recommended Horsepower
25
40
Recommend Yamaha Engine F25LEH F40LEH
Maximum Passengers
3
4
Max. Person Capacity
355
475
Max Capacity Total
755
980
Cockpit
K Console
FX Console
FB Console
NXS Console
SV Console
48 qt. Cooler(helm seat )
74 qt. Flip-Flop Cooler Seat
Leaning Post w/ 76 qt. Cooler
48Q Cooler (front of console)
72Q Cooler (front of console)
Front Deck Bass Chair
O
O
Rear Deck Bass Chair
Rear Deck Chair Bases (S.S.)
Front Deck Jump Seats
Storage underJump Seats
Storage under Front Deck
S
S
Front Deck Sun Pad
O
O
Steering
U-Flex No-Feed-Back Steering
Uflex Hyco Hydraulic Steering
Uflex ProTech Hydraulic Steer
SS Steering Wheel (DIA.)
Fuel Systems
Fuel Tank in Console
Console side fill w/ SS Cap
Yamaha Fuel Filter
O g O
K16CC
K16T
SKIFFS
K14T
2011 Specifications
O
O
O
O
4
1
O
O
O
O
O
O
O
O
O
4
1
O
O
O
O
O
FX19
4
S
48
S
NX25
2
S
48
S
NX23
6
NX21
SV23
SV205
SV186
6
FX17
Anchor Locker
Storage under Front Deck
Front Deck Sun Pad
Front Deck Bolsters
Rear Cockpit Bolsters
Steering
U-Flex No-Feed-Back Steering
Uflex Hyco Hydraulic Steering
Uflex ProTech Hydraulic Steering
Stainless Steel Steering Wheel (Dia)
Tops
Bimini Top w/ Boot
Tee Top w/ or wo/ Electronics Box
Sunbrella Mooring Cover
Sunbrella Console Cover
NX19
Length Overall
Beam
Floor Width (at Transom)
Transom Height
Weight (No Fuel or Engine)
Dead Rise (degrees at Transom)
Draft
Fuel Capacity
Interior Height (at Transom)
Max Horsepower
Recommended Horsepower
Recommended Yamaha Engine
Maximum Passengers
Max. Person Capacity
Max Capacity Total
Cockpit
FX Console
FB Console
NXS Console
SV Console
NX Console
74 qt. Flip-Flop Cooler Seat
Leaning Post w/ 76 qt. Cooler
Rod Holders on Leaning Post
Foot Rest on Leaning Post
Fiberglass Helm Station
Fresh Water Tank and Sink
Helm Station Tackle Center
Helm Station Bait Well
Front Deck Bass Chair
Rear Deck Bass Chair
Rear Deck Chair Bases (S.S.)
Folding Rear Jump Seats
Aft Lounge Seat
Front Deck Jump Seats
Storage under Front Jump Seats
SV, NX, FX
NX17
Specifications
SV171
FX19
2011 Specifications
FX17
NX25
NX23
NX21
NX19
NX17
SV23
SV205
SV186
SV, NX, FX
SV171
2011 Specifications
S
4
S
4
S
70
O
S
70
O
S
70
S
S
70
S
S
32
O
S
32
O
S
S
S
S
S
S
3
S
S
3
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
O
S
S
S
S
O
S
S
S
Fishing Hardware & Plumbing
17-1
90"
70"
20"
1250
17
11"
34
18"
115
90
F90TL
5
635
1240
18-6
90"
70"
25"
1450
17
11"
40
19"
150
115
20-5
98"
75"
25"
1850
17
12"
45
20"
200
150
23-1
98"
76"
25"
2150
19
14"
72
22"
250
250
F115TX F150TX F200TX
5
635
1300
6
775
1525
8
1160
2100
17'-2"
90"
67"
20"
1350
7
7"
29
19"
90
70
18-10
91"
67"
20"
1475
7
7"
29
19"
115
90
F70LA
F90TL
5
737
1520
6
775
1525
21-1
97"
74"
25"
1850
7
9"
45
20"
150
150
23-1
99
74
25
2475
7
9
72
24"
250
225
25-1
99
74
25
2735
7
9
72
24"
300
250
F150TX F200TX F250XC
8
1160
1900
8
1160
2529
10
1442
3380
17-1
77"
51"
20"
890
10
7"
18
12"
70
70
19-1
83"
59"
20"
1020
10
7"
31
13"
150
115
F70LA
F90TL
3
355
980
3
475
1250
S
S
S
S
S
S
S
S
S
S
O
O
O
S
O
O
O
S
O
O
O
O
O
O
S
O
O
O
O
O
O
O
O
O
S
O
S
S
O
O
O
S
S
S
S
S
S
O
S
S
O
O
S
O
O
S
O
15
15
S
13
O
O
O
O
O
O
O
O
O
O
O
O
S
13
O
O
O
O
S
S
O
O
O
S
O
O
O
O
O
O
O
O
O
O
S
O
S
O
O
O
O
S
S
S
S
S
O
O
O
O
S
S
S
O
O
O
O
O
S
O
S
S
O
O
O
O
S
S
S
S
S
S
S
O
O
O
S
S
O
O
O
S
S
O
O
O
S
S
O
O
O
S
O
S
O
S
15
15
13
S
13
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
S
S
S
O
S
O
S
13
13
15
O
O
O
O
O
O
O
O
Rod Racks under gunwale
Rod Holder Racks on Console
Rod Holders (SS) on Console
Rod Holders (SS) on Gunwales
Insulated Well - port side aft
Size in Qts.
Raw Water Aeration
Insulated Well - Stbd side aft
Size in Qts.
Raw Water Aeration
Insulated Well - center aft
Size in Qts.
Raw Water Aeration
Insulated Fish Box - Aft Lounge Seat
Insulated Console Well
Size in Qts.
Raw Water Aeration
Installed Hardware & Accessories
Rigid Rub Rail w/ Stainless Steel
White, Grey or Black Rub Rail
Console Wind Shield & S.S. Hand Rail
Quick Remove Windshield Fasteners
Quick Remove Console rail
Stainless Cleats
Flush Mount SS Bow Cleat
ALL Flush Mount Spring Cleats
SS Cup Holders on Console
Console Glove Box
Transom Swim Platform
Integrated Transom Swim Ladder
Electrical & Plumbing Systems
Bow Light & Stern Light
Nav Light Storage under Front Deck
Side Rail, Stainless Steel, Full Weld
4 Switch Electrical Panel
7 Switch Electrical Panel
Circuit Breakers
Yamaha Tachometer, Fuel & Volt
Yamaha Tachometer & Fuel
Yamaha Speedometer
Marinco Power Point on dash
Trolling Wire Kit (6 AWG) to console
Battery Selector Switch
Battery Tray
Auto Bilge Pump
Aerator Pump w/ High Speed Pick-Up
Aerator Sea Cock (bronze)
Aerator Pump for Fish Ice Box
Fuel Systems
Fuel Tank below floor
SS Gas Cap
Yamaha 10 micron fuel separator
6
S
40
S
6
2
S
40
S
6
4
S
48
O
6
4
S
48
O
6
4
S
100
O
S
36
S
S
84
S
S
32
O
S
32
O
S
32
O
S
32
O
S
32
O
S
32
O
S
S
S
S
S
5
S
O
4
S
O
S
S
S
S
S
5
S
S
4
S
O
S
S
S
S
S
5
S
S
4
S
O
S
S
S
S
S
3
S
S
4
O
S
S
S
S
S
5
S
S
4
O
S
S
S
S
S
5
S
S
4
S
S
S
S
S
S
5
S
S
2
S
S
S
S
S
S
5
S
S
2
S
S
S
S
S
S
6
S
84
S
S
84
S
S
84
S
120
S
S
S
O
5
S
O
O
S
S
6
S
84
S
S
84
S
120
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
O
S
S
S
O
S
S
S
S
S
S
S
S
S
S
S
S
S
S
O
S
S
S
S
S
S
S
O
S
S
S
S
O
S
S
S
O
S
S
S
S
O
1
S
S
O
S
S
S
S
O
S
S
O
S
S
S
S
O
S
S
O
S
S
S
S
S
S
S
O
S
S
S
S
O
S
S
S
S
S
S
S
S
S
O
S
S
S
S
S
O
S
S
O
S
S
S
S
O
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
1
30
Authorized Dealer
www.sundanceboats.com
6131 Sundance Rd, Blackshear, GA 31516 912-449-0033
Fax: 912-449-0038
Email: info1@sundanceboats.com
Sundance Boats, Inc. continually strives to improve and enhance our products. We reserve the right to change, discontinue or alter specifications, models, features, equipment or prices without notice or incurring any obligations. Some photographs in this brochure may feature boats with optional installed equipment. Some options may conflict with other options. Specification and measurements are approximate and subject to variances. All Sundance Boats are built to meet
or exceed U.S. Coast Guard requirements at time of manufacturer. Sundance Boats, Sundance Skiffs, K Series, F Series, B Series, SV Series, FX Series and NX Series are trademarks of Sundance Boats, Inc. All Rights Reserved. Revised July 1, 2010. Confirm all specification and options with your Dealer prior to purchase.

Similar documents

Woodford Price Guide

Woodford Price Guide The MB30BX includes a high impact composite box that is stubbed out of a frame or masonry wall. After the wall is finished, a durable composite door and fascia assembly is simply screwed into the b...

More information

(410) 335-6200 - The Salty Dog

(410) 335-6200 - The Salty Dog 22’ 1987 GRADYWHITE SEAFARER, 1999 225 john son,ttop,ff,amfm,gps,vhf,windless anchor,clean, runs good.Trailer included., $9,500, 443-907-5234 csac2@ aol.com

More information

(410) 335-6200 - Used Boats For Sale

(410) 335-6200 - Used Boats For Sale 36’ 1967 WATER TAXI, turn key, business opportunity, fiberglass, 19 passenger w/prof capt license, 36’ x 11’, 5’5” draft, cabin, head, new canopy, $29,900 REDUCED, 301-765-0750, fred@dc-cruises. com

More information