(Vibra-TITE) Interchange

Transcription

• THREADLOCKERS • THREAD SEALANTS
• RETAINING COMPOUNDS • LIQUID GASKETING
• CYANOACRYLATES • ANTI-SEIZE COMPOUNDS
• UV CURABLES • EPOXIES • AND MORE!
A Company You Can Rely On
Vibra-TITETM – A Trademark of ND Industries
Since 1955, ND Industries has been providing
Vibra-TITE is one of the world’s market leaders in
top
anaerobics, cyanoacrylates, epoxies and ultra-violet
quality
products
industries
fastening
and
services
including
and
to
assembly
a
wide
automotive,
related
of
technologies. Vibra-TITE is quickly becoming one of
electronics,
the most highly respected names in the adhesive
variety
aerospace, appliance,
industry. And, as a result
and
of ND’s low overhead
ND's
many
more.
commitment
to
expenses and in-house
improvement has led to
capabilities, Vibra-TITE
a continuous investment
products offer the same
in the best equipment,
high quality and superior
facilities, and people to serve you.
performance
of
other
name
brand
products
AT A COST SAVING OF UP TO 40%.
A Trademark of ND Industries
2
A Single-Source Supplier
A Global Presence
ND is a vertically integrated company and has
ND owns and operates numerous facilities in North
achieved a unique position in today’s market place with
America. ND’s latest state of the art expansion includes
a wide range of products designed to seal, cushion,
facilities in Taiwan and China with licensees located
insulate, temporarily retain, and control noise and
throughout the world. No matter where they are
vibration. ND's high quality line of products, customer
located, each ND facility is a fully supported member of
driven solutions and on-time-delivery is the reason why
the ND family dedicated to providing innovative,
more companies are turning to ND as their
affordable fastening and assembly related products
single-source supplier.
and services.
Table of Contents
Anaerobic Threadlockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Vibra-TITE® VC-3TM Original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Thread Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Liquid Gasketing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Anti-Seize Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cyanoacrylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
Light Cure Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Structural Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Primers, Accelerators & Activators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Epoxies
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Hot-melts / Urethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
MMA’s
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Vibra-TITE Specialty Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ND R & D, Chemical Blending, and Private Label Services . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
ND Pre-Applied Products and Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.com
®ND, ND logo and ND Industries are registered trademarks of ND Industries, Inc. Vibra-TITETM is a trademark of ND Industries, Inc.
3
Anaerobic
THREADLOCKERS
• Locks and seals threaded fasteners
• Stops fasteners from loosening from shock and vibration
• Performs better than lock washers, bevel washers, and
other forms of mechanical locking devices
• Alleviates rust-lock
• Prevents leakage
Vibra-TITE
Part #
111
11102
11110
11150
11125
11100
121
12102
12110
12150
12125
12100
125
!
NEW 12535
Available Loctite® Product
Color
Approx.
Max Gap Torque Strength,
Sizes Part # Description
Viscosity (cP) (FILL, IN) Break/Prevail (in LB)
222 LOW STRENGTH
2 ml bullet __ *__ Easy to remove –
Purple 1,200/5,000
0.007
75/25
10 ml bottle 21463 for fasteners smaller
Thixotropic
50 ml bottle 21464 than 1/4" in diameter.
250 ml bottle __ *__
1L bottle
__ *__
242® MEDIUM STRENGTH
2 ml bullet __ *__ Removable Grade
Blue 1,200/5,000
0.007
120/45
10 ml bottle 24221 for bolts 1/4" to 3/4”
Thixotropic
50 ml bottle 24231 in diameter.
250 ml bottle 24241
1L bottle
24243
MEDIUM STRENGTH GEL
35 ml pump
Removable Grade
Blue
Gel
0.015
120/45
Temperature Fixture Time Specific Suggested Agency
Range
(MIN)
Gravity Primer
Approvals
-65°F to +300°F
10 to 30
1.05
T or N
MIL-S-46163A
ASTM D-5363
NSF
-65°F to +300°F
10 to 30
1.07
T or N
MIL-S-46163A
ASTM D-5363
NSF
-65°F to +300°F
10 to 30
1.1
T or N
for nuts or bolts
1/4" to 3/4”
in diameter.
122
12202
12210
12250
12225
12200
131
13102
13110
13150
13125
13100
135
NEW! 13535
137
13750
13725
13700
140
14002
14010
14050
14025
14000
146
14602
14610
14650
14625
14600
150
15002
15010
15050
15025
15000
4
243
__ *__
24077
24078
24079
21433
262
2 ml bullet __ *__
10 ml bottle 26221
50 ml bottle 26231
250 ml bottle 26241
1L bottle
26243
OIL TOLERANT
35 ml pump
Locks nuts or bolts
up to 1/4”
in diameter.
2 ml bullet
10 ml bottle
50 ml bottle
250 ml bottle
1L bottle
Used on fasteners
from 1/4" to 3/4"
in diameter.
Blue
2,250-12,000
Thixotropic
PERMANENT STRENGTH
Red 1,800/5,000
Thixotropic
Permanently locks
nuts or bolts up to
than 3/4” in diameter.
PERMANENT STRENGTH GEL
Red
Gel
272 HIGH TEMP / HIGH STRENGTH
50 ml bottle 27240 Locks nuts and bolts up Red
9,500
250 ml bottle 27270 to 1 1/2” in diameter in
1L bottle
27285 high temp applications.
271 HIGH STRENGTH
2 ml bullet __ *__ Permanently locks
Red
500
10 ml bottle 27121 nuts or bolts
50 ml bottle 27131 up to 1” in diameter.
250 ml bottle 27141
1L bottle
27143
277 LARGE DIAMETER / HIGH STRENGTH
2 ml bullet __ *__ Permanently locks
Red
7,000
10 ml bottle 21434 nuts or bolts up to
50 ml bottle 27731 1 1/2” in diameter
250 ml bottle 27741
1L bottle
27743
290 WICKING GRADE / MEDIUM STRENGTH
2 ml bullet __ *__ Used on pre-assembled Green
12
10 ml bottle 29021 fasteners up to 1/2” in
50 ml bottle 29031 diameter and porous
250 ml bottle 29041 die castings.
1L bottle
29043
*Corresponding size not available.
0.015
195/70
-65°F to +300°F
5-10
1.08
T or N
0.007
200/100
-65°F to +300°F
5 to 20
1.05
T or N
0.015
200/100
-65°F to +300°F
5 to 20
1.1
T or N
0.007
300/250
-65°F to +450°F
5 to 60
1.11
T or N
0.007
250/275
-65°F to +300°F
10 to 30
1.10
T or N
MIL-S-46163A
ASTM D-5363
0.010
300/250
-65°F to +300°F
10 to 20
1.12
T or N
MIL-S-46163A
ASTM D-5363
0.004
85/250
-65°F to +300°F
5 to 20
1.08
T or N
MIL-S-46163A
ASTM D-5363
NSF
MIL-S-46163A
ASTM D-5363
NSF
Vibra-Tite Anaerobic
Threadlockers lock and seal
Anaerobic Threadlockers
NEW
Introduction!
Low Strength
Typical uses:
• Soft metal fasteners
• Locking fasteners smaller
than ¼" in diameter.
15-25 Applications
in each Tube!
Medium Strength
Vibra-TITE 111 Low Strength Threadlocker that eliminates vibrational
loosening and seals against leakage and corrosion. Ideal for use on assemblies requiring periodic adjustment. Typical uses include soft metal fasteners,
precision screws, and locking fasteners smaller than 1/4” in (6mm) diameter.
Typical uses:
• Locking nuts or bolts
larger than ¼" in diameter.
COMPARE TO LOCTITE® 222
Vibra-TITE 121 Medium, Removable Strength Threadlocker that seals
nuts and bolts allowing disassembly using standard tools. Typical uses
include locking nuts or bolts from 1/4” to 3/4” (6-60mm) in diameter.
COMPARE TO LOCTITE 242®
Vibra-TITE 122 Medium Strength Threadlocker with greater oil tolerance.
Typical uses include locking nuts or bolts ranging from 1/4” to 3/4” (20-60mm)
in diameter. COMPARE TO LOCTITE 243
Vibra-TITE 131 High Strength Permanent Threadlocker for maximum
security suitable for most applications where disassembly is not required.
Designed to withstand extreme environmental conditions and chemical
exposure. Ideal for the prevention of rust and corrosion. Typical uses include
permanently locking nuts or bolts up to 3/4” (60mm) in diameter. Heat and
hand tools are needed for disassembly. COMPARE TO LOCTITE 262
High Strength
Typical uses:
• Permanently locking nuts
or bolts larger than ¼" in
diameter.
THREADLOCKERS
2 ml Resealable
Bullet Tubes
threaded fasteners. Liquid threadlockers are considered to be the
most effective method of locking
threaded fasteners because they
utilize the entire assembly. They
perform better than traditional
mechanical devices such as lock
washers preventing any loosening from shock and vibration.
Vibra-TITE 137 High Strength Threadlocker for maximum security that
withstands temperatures to 4500 F. Typical uses include bolts up to 1 1/2” in
diameter. Heat and hand tools are needed for disassembly.
COMPARE TO LOCTITE 272
Vibra-TITE 140 High Strength Threadlocker for maximum security.
Suitable for most applications where disassembly is not required. Typical
uses include permanently locking nuts or bolts up to 1” (25mm) in diameter.
Heat and hand tools are needed for disassembly. COMPARE TO LOCTITE 271
Vibra-TITE 146 High Strength Threadlocker. Typical uses include permanently locking nuts or bolts up to 1 1/2” in diameter. Heat and hand tools are
needed for disassembly. COMPARE TO LOCTITE 277
Vibra-TITE 150 Wicking Grade, Medium Strength Threadlocker
designed specifically for use on pre-assembled connections. Seals small gaps
through capillary action. Typical uses include pre-assembled fasteners up to 1/2”
in diameter and porous die castings. Protects welds from rust and corrosion. Hand
tools are needed for disassembly. COMPARE TO LOCTITE 290
Vibra-TITETM is a trademark of ND Industries, Inc. ®Loctite and Loctite 242 are registered trademarks of the Henkel Corporation
Wicking Grade
Typical uses:
• Pre-assembled fasteners
and porous die castings.
5
Anaerobic
Threadlockers
NEW
Introduction!
100 ct. 2ml Bullet Tubes
in handy counter-top
fishbowl display.
Available with 121 and 131 threadlockers.
Part #12199
Vibra-TITE 121* Fishbowl
with 100 ct. 2ml Bullet Tubes
Medium Strength Threadlocker
Part #13199
Vibra-TITE 131* Fishbowl
with 100 ct. 2ml Bullet Tubes
*COMPARE TO LOCTITE 262
*COMPARE TO LOCTITE® 242®
#1
353 5 Hi g h
St
g
re n
®
th T hre ad
lo c
k e r Ge l
NEW
Introduction!
# 12 5 3 5 M e d i
Part #13535
High Strength Threadlocker
in 35ml pump dispenser.
6
No Mess!
No Waste!
No-drip
formulas
provide complete
coverage
every time!
um
e
Str
n g th T h r e a
d lo
c ker G e l
Part #12535
in 35ml pump dispenser.
Not an Adhesive!
Not an Anaerobic!
Reusable 5 or more times!
Part #21330 – 30cc bottle with
brush/cap applicator.
Part #21325 – 250cc can.
One Tough Application!
•
•
•
•
•
Stops fasteners from loosening from extreme shock and vibration
Works with metal, wood, plastic and more
Fasteners are easily adjusted, removed and reused
Works on fasteners of any shape or size, from tiny eyeglass screws to large construction bolts
Works with internal or external threads
This product is approved by TACOM*
for use on the US Army’s main battle tank!
*US Army Tank-automotive and Armaments Command Part# 11663357
THREADLOCKERS
Vibra-TITE VC-3 “Original” is a
powerful locking and sealing coating for
threaded fasteners that works on the
principle of "friction through viscosity".
Vibra-TITE VC-3 Original utilizes a
special blend of acrylic resins to prevent
fasteners from loosening even under
the stress of prolonged and
extreme shock and vibration.
Vibra-TITE VC-3 also works to
resist leakage at fastening
points by acting as a dam
between mated threads.
Vibra-TITE VC-3 Original Specifications
• Container size (manual application) . . . .1oz. (30 cc), 8 oz. (250 cc), or larger containers
Vibra-Tite VC-3 Original meets or exceeds the
• Color . . . . . . . . . . . . . . . . . . . . . . . . . . . .Red (custom colors are also available)
performance requirements of the following
• Solvent . . . . . . . . . . . . . . . . . . . . . . . . . .Methyl ethyl ketone
• Cured form . . . . . . . . . . . . . . . . . . . . . . .Resilient plastic
specifications and/or standards:
• Shelf life . . . . . . . . . . . . . . . . . . . . . . . . .Indefinite (under ideal storage conditions)
• Chemical resistance . . . . . . . . . . . . . . . .Offers resistance to most solvents (acts as a partial corrosion barrier)
MILITARY • Mis-28867
• Total resistance . . . . . . . . . . . . . . . . . . .Fresh and salt water
• Dries to touch . . . . . . . . . . . . . . . . . . . . .In seconds
• U.S. Air Force Part # 19207
• Dries for use . . . . . . . . . . . . . . . . . . . . . .In minutes
• U.S. Army Tank Automotive Command
• Drying method for bulk production . . . . .Best achieved using considerable airflow in addition to temperature
(General Dynamics) Part #11663357
not exceeding 130oF
o
o
o
o
•
National Stock Number NSN-8030-00-163-5792
• Operational temperature range . . . . . . .-65 F to +165 F (-54 C to +74 C)
For other temperature applications, please consult factory
• Reusable . . . . . . . . . . . . . . . . . . . . . . . .5 or more times
OEM
• Detroit Diesel 9S244 & 9S256
• Engagement torque . . . . . . . . . . . . . . . .Moderate
• Grumman Aerospace Standard GF105VP1, CA1
• Breakaway . . . . . . . . . . . . . . . . . . . . . . .No distinct break; slow, fluid release as material cold flows
• Allied Signal Aerospace Company Part #EMS73314
• Standard coating length . . . . . . . . . . . . .1 to 1 1/2 times diameter
• Lead thread requirement . . . . . . . . . . . .None
• Thread fill requirement . . . . . . . . . . . . . .30 – 50% of the thread root area
Note: See MSDS for Safety & Material Handling Instructions
®Vibra-TITE VC-3 Original is a registered trademark and Vibra-TITETM is a trademark of ND Industries, Inc.®Loctite and Loctite 242 are registered trademarks of the Henkel Corporation
7
THREAD SEALANTS
• Seals and secures metal pipes and fittings
• Fills the space between threaded metal parts
• Prevents leakage caused by tape shredding, vibration
loosening, solvent evaporation, damaged threads
• Prevents corrosion and galling of threads
• Low and high pressure applications
• Seals to the pipe burst strength
• Facilitates assembly
• Service removable
NEW!
Vibra-TITE
Part #
420
42050
_____
42025
!
W
E
N
_____
42016
_____
42000
440
44050
44025
44000
Color
Approx.
Max Gap Sealing Pressure Temperature Cure Speed Suggested Agency
Viscosity (cP) (FILL, IN) (cP)
(PSI)
Range
(MIN)
Primer Approvals
565/592 INDUSTRIAL GRADE SEALANT
50 ml tube 56531/ Industrial grade,
White 150,000 to
0.012
10,000
-65°F to +300°F
60
T or N
__________ 59231 controlled locking
550,000
250 ml tube 56541/ strength, metal fit.
(Paste)
__________ 59241 High temp & high
16 oz. jar
performance.
with Brush Top __ *__
1L bottle
56543/
59243
545 PNEUMATIC / HYDRAULIC SEALANT
50 ml bottle 54531 Pneumatic and
Purple
16,000
0.007
10,000
-65°F to +300°F
30
T or N
250 ml bottle 54541 hydraulic sealant
1L bottle
*
for fluid, power
and gas system
connections.
444
44450
44425
44400
569 HYDRAULIC SEALANT
50 ml bottle 54531 Hydraulic sealant,
Brown
250 ml bottle 54541 non shrink, high
1L bottle
*
vibration and shock
300 to 500
0.007
10,000
-65°F to +300°F
10
T
10,000
-65°F to +300°F
10
T or N
10,000
-65°F to +400°F
60
T or N
10,000
-65°F to +300°F
90
T or N
resistant.
446
44650
44625
44600
460
46050
46025
46000
50 ml bottle
250 ml bottle
1L bottle
554
__ *__
55441
*
567
56747
56765
56790
50 ml tube
577 HIGH STRENGTH / YELLOW
21456 High performance
Yellow
50 ml bottle
250 ml bottle
1L bottle
NEW!
427
42750
REFRIGERANT SEALANT
Refrigerant sealant.
Red 6000 to 8000
Maximum solvent
resistance.
HIGH TEMP / STAINLESS STEEL SEALANT
General purpose
White
350,000
0.012
stainless steel and
other inert metal
threaded pipe and
fittings.
sealant.
8
420,000
0.012
GM 1182607
NFS
Thread Sealants
Seal up to Pressures of 10,000 psi
Vibra-TITE 420 Industrial Grade Sealant cures rapidly with controlled
lubricity preventing galling while protecting from corrosion and rust. Parts
may be repositioned up to 24 hours after assembly. Typical uses include
stainless steel and all other metal fittings. COMPARE TO LOCTITE® 565/592
Vibra-TITE 440 Hydraulic & Pneumatic High Pressure Sealant with
excellent solvent resistance. It locks hydraulic and pneumatic connections
producing a high strength, high pressure seal, while allowing easy disassembly
with standard tools. Typical uses include pneumatic fittings, small pipe
threads, and hydraulic fittings up to 2” in diameter. COMPARE TO LOCTITE® 545
Vibra-TITE 446 High Pressure Sealant – Refrigerant Sealant provides
excellent resistance to solvents on threaded pipes and fittings up to 3” in
diameter. Typical uses include refrigeration systems and service with volatile
chemicals. COMPARE TO LOCTITE® 554
Vibra-TITE 460 PTFE Instant Pipe Sealant prevents galling and provides
an instant low pressure seal on coarse fitting threads which is further
strengthened as the product cures. Assembled parts can withstand
temperatures up to 400o F and may be repositioned up to 24 hours after
assembly. Typical uses include stainless steel, aluminum, galvanized metal
and other inert metal threaded pipe fittings. COMPARE TO LOCTITE® 567
Vibra-TITE 427 High Pressure Yellow Sealant – High Viscosity locks
and seals threaded fittings with high performance withstanding temperatures
up to 300oF.
Benefits :
Lubricates during assembly
Seals regardless of assembly torque
Seals to the burst rating of the pipe
Provides controlled disassembly
torque
• Easy dispensing
• Good chemical and temperature
resistance, 300°F (150°C)
• Instant seal
• Seals and secures metal fittings
•
•
•
•
and secure metal pipes and
fittings, by filling the space
between threaded metal parts.
Thread sealants prevent leakage
caused by tape shredding,
vibration loosening, solvent
evaporation,
and
damaged
threads. Vibra-TITE products are
designed for both low and high
pressure applications. Thread
sealants seal to the burst strength
of most piping systems. Because
of the lubricating properties,
Vibra-TITE thread sealants make
it easy to assemble fittings as
well as prevent galling of the
threads. For repairs, parts may
be disassembled with basic hand
tools.
THREAD SEALANTS
Vibra-TITE 444 High Pressure Sealant is a general purpose pipe sealant
that creates an instant seal on threaded joints with a high resistance to solvents and withstands temperatures to 300o F (149o C). Typical uses: Small
pipe threads and hydraulic fittings. COMPARE TO LOCTITE® 569
Thread Sealants seal
Typical Applications:
• Fire protection industry
• Chemical processing industry
• Petroleum refining industry
• Waste treatment facilities
• Utilities and power generation
• Gas compression and
distribution
• Automotive and industrial
equipment
Vibra-TITETM is a trademark of ND Industries, Inc. ®Loctite and Loctite is a registered trademark of the Henkel Corporation
9
RETAINING COMPOUNDS
• Increases the shear strength on non-threaded,
cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakage
• Prevents corrosion
Vibra-TITE
Part #
530
53002
53010
53050
53025
_____
53000
538
53850
53825
53800
541
54110
54150
54125
54100
Color
Approx. Max Gap Shear Strength
Viscosity (cP) (FILL, IN)
(PSI)
609/675 GENERAL PURPOSE RETAINING COMPOUND
2 ml bullet __ *__ Retaining Compound Green
125
0.005
>2000
10 ml bottle 60921 Typical uses: rotors,
50 ml bottle 60931 augment press fits,
250 ml bottle 60941/ shafts, bushings,
__________ 67541 bearings, and pulleys.
1L bottle
60943
638 HIGH STRENGTH RETAINING COMPOUND
50 ml bottle 21448 High strength for loose Green
2500
0.015
>4000
250 ml bottle 21449 fitting parts.
1L bottle
*
680 HIGH STRENGTH RETAINING COMPOUND
10 ml bottle 68015 High strength gap filling Green
1200
0.015
>3000
50 ml bottle 68035 product. Permanently
250 ml bottle 68060 retains slip-fit.
1L bottle
68090 Typical uses:
Temperature Fixture Time Specific Suggested
Range
(MIN)
Gravity Primer
-65°F to +300°F
10 to 20
1.10
T or N
-65°F to +300°F
5
1.09
T or N
-65°F to +300°F
20 to 40
1.11
T
Agency
Approvals
MIL-R-46082
ASTM D-5363
GM-1183024
rotors, shafts,
impellers, and splines.
542
54210
54250
54225
54200
635
10 ml bottle __ *__
50 ml bottle 63531
250 ml bottle 63541
1L bottle
*
546
54650
54625
54600
548
54850
54825
54800
N/A
50 ml bottle __ *__
250 ml bottle __ *__
1L bottle
*
648
50 ml bottle 21444
250 ml bottle 21445
1L bottle
*
550
55050
560
56010
56050
56025
56000
567
56710
56750
56725
56700
11358
50 ml bottle 11358
640
10 ml bottle __ *__
50 ml bottle 64031
250 ml bottle 64041
1L bottle
*
620
10 ml bottle 62015
50 ml bottle 62040
250 ml bottle 62070
1L bottle
62085
10
HIGH STRENGTH RETAINING COMPOUND
Green
2000
0.015
>4000
-65°F to +300°F
20 to 40
1.05
T
IMPACT RESISTANT RETAINING COMPOUND
Green
600
0.015
>2000
-65°F to +300°F
20 to 40
1.09
N
RAPID CURING RETAINING COMPOUND
Green
500
0.007
>3500
-65°F to +350°F
5
1.09
T or N
>2300
-65°F to +300°F
10 to 20
1.09
N
>3000
-65°F to +400°F
5 to 60
1.12
T or N
MIL-R-46082
ASTM D-5363
>3500
-65°F to +450°F
20 to 30
1.16
T or N
GM-1183026
High viscosity
permits larger machine
tolerances.Typical uses:
rotors, shafts, impellers,
and splines.
Flexible for impact
resistance.
Fast fixturing for close
fitting parts, high
strength for
stainless steel.
CORE PLUG SEALANT
Blue
8500
0.02
HIGH TEMPERATURE RETAINING COMPOUND
High strength adhesive Green
600
0.007
Typical uses: rotors,
shafts, bushings,
bearings, and pulleys.
HIGH TEMPERATURE RETAINING COMPOUND
High strength adhesive Green
7000
0.015
Typical uses: rotors,
shafts, bushings,
bearings, and pulleys.
MIL-R-46082
ASTM D-5363
Retaining
Compounds
Vibra-TITE 530 General Purpose Retaining Compound bonds metal
assemblies. A low viscosity retaining compound recommended for diametral gap
distances up to 0.005” to augment press fits. Withstands temperatures of up to 300o
F providing a shear strength of 3,000psi after 24 hours with a fixture time of
10 minutes. Typical uses: Rotors, shafts, bushings, bearings, and pulleys.
COMPARE TO LOCTITE® 609/675
Vibra-TITE 538 Slip Fit / High Strength Retaining Compound – maximum
strength for use where high dynamic force or cyclic loading is anticipated.
Vibra-TITE 542 High Strength Retaining Compound is a high viscosity
retaining compound that allows parts to be adjusted during assembly. It provides a
shear strength greater than 4,000psi. Typical uses include slip fit components,
rotors, shafts, impellers, and splines. COMPARE TO LOCTITE® 635
Vibra-TITE 546 Substantial Impact Resistance – flexible for high shock/impact
performance from hub to rotor.
Vibra-TITE 548 Press Fit / Rapid Cure – works with continuous operating
temperatures up to 350OF. It provides a shear strength greater than 3,500psi.
Vibra-TITE 550 Core Plug Sealant COMPARE TO LOCTITE® 11358
are designed to increase shear
strength on non-threaded,
cylindrical metal assemblies.
The liquid anaerobic material
fills voids between close-fitting
metal assemblies. It cures to a
toughened thermoset-plastic
which creates a solid one
piece assembly. Retaining
compounds
seal
joints
against leakage and prevent
corrosion. These materials
have gained wide acceptance
as a standard method for
assembling
press-fit
and
slip-fitted parts.
R E TA I N I N G
Vibra-TITE 541 High Strength Retaining Compound that cures in room temperatures filling diametral gaps up to 0.015”. Typical uses include fitted cylindrical
parts replacing set screws, clamp rings, and snap rings. It provides a shear
strength greater than 3,000psi after 24 hours with a fixture time of 10 minutes.
Retaining Compounds
Vibra-TITE 560 High Temperature Retaining Compound is a high temperature
(400o F), high strength adhesive for retention of cylindrical components, where
disassembly is not required on press-fit assemblies. It provides a shear strength
greater than 3,000psi. Typical uses: Rotors, shafts, bushings, bearings, and pulleys
with temperatures up to 400OF. COMPARE TO LOCTITE® 640
Vibra-TITE 567 High Temperature Retaining Compound locks metal
cylindrical assemblies with diametral clearances up to 0.015”. Provides a shear
strength greater than 3,500 psi on steel sealing against leakage while preventing
corrosion. Typical uses: Rotors, shafts, bushings, bearings, and pulleys.
Benefits:
• Reduce machining costs
• Press/shrink fits can be replaced
with slip fits
• No expensive finishes required
• Increase mechanical strength
of the assembly
• 100% surface contact
• Retains and seals, eliminate
corrosion and seizure
• Restore fit to worn or out-oftolerance assemblies
• Eliminate part replacement
• Part distortion is eliminated
Typical Applications
• Mount bearings in housings or shafts
• Mount motors, gears, sprockets
and pulleys on shafts
• Retain cylindrical linings
• Replace keys and set screws
• Augment slip fits
• Lock keyways
• Secure splines, Bushings, Bearings,
Oil seals, Water pumps, Core plugs
11
LIQUID GASKETING
Form-In-Place Gasket for close fitting rigid metal
flanges. Ideal for flanges that move in service.
Vibra-TITE Anaerobic Liquid Gasketing is designed
primarily for close fitting (small gap) rigid metal flanges.
The Anaerobic material remains liquid when exposed to
air, but cures when confined between mating flanges.
Anaerobic liquid gasketing can fill gaps of 0.050
(primed) and alleviates the need for preformed gaskets.
It is ideal for flanges that move in service and can be
used as form-in-place gaskets.
Benefits:
• Remains liquid when exposed to air
• Cures when confined between mating flanges
• Can fill gaps as large as 0.050*
• Alleviates the need for preformed gaskets
Vibra-TITE
Part #
709
70950
Typical Applications:
Can be used as a Form-In-Place Gasket for:
• Thermostats
• Compressors
• Pumps
• Transmission housings
• Gearboxes
• Axle covers
Color
Approx. Max Gap Temperature Cure Speed Specific
Viscosity (cP) (FILL, IN)
Range
Gravity
509 GASKET MAKER
50 ml tube
*
Flexible flange sealant Blue
65,000/
Unprimed: -65°F to +300°F
Unprimed:
1.12
withstands minor
200,000
0.010
6 - 48 hrs.
movements caused by
Thixotropic
Primed:
Primed:
0.020
1 - 6 hrs.
vibrations. Fluorescent
Suggested Agency
Primer
Approvals
T or N
N/A
1.16
T or N
N/A
1.13
N
GM-1182863
1.10
N
N/A
blue color aid visual
assembly inspections.
710
71050
71025
510 HIGH TEMPERATURE RIGID FLANGE SEALANT
50 ml tube 51031 High temperature
Red
188,000/
Unprimed:
250 ml tube 51041 rigid flange sealant
500,000
0.010
withstands temperatures
Thixotropic
Primed:
0.020
to 400°F with excellent
-65°F to +400°F
Unprimed:
4 - 24 hrs.
Primed:
30 min. - 4 hrs.
chemical and solvent
resistance.
730
73050
73025
73030
518 FLEXIBLE GASKET MAKER
50 ml tube 51831 Solvent resistant –
Red
800,000/
250 ml tube __ *__ Aluminum flange
3,750,000
300 ml
51845 surfaces, flexible
Thixotropic
cartridge
parts.Flexible gasket
Unprimed:
-65°F to +300°F
0.010
Unprimed:
1 - 12 hrs.
*Primed:
Primed:
0.050
15 min. - 2 hrs.
for rigid machine flanges.
Eliminates pre-formed,
pre-cut paper, rubber
and cork gaskets.
732
73250
73225
515 FLEXIBLE GASKET MAKER
50 ml tube 51531 General purpose
Purple
275,000/
250 ml tube
*
gasket maker that
950,000
flexes with flanges.
Thixotropic
Eliminates pre-formed,
pre-cut paper, rubber
and cork gaskets.
12
Unprimed:
-65°F to +300°F
Unprimed:
0.010
4 - 24 hrs.
*Primed:
0.050
30 min. - 4 hrs.
Primed:
ANTI-SEIZE LUBRICANTS
907N
__90722__ 2 ml bullet__
90724 4 oz.
___________ brush-top can
90728 8 oz.
90726 16oz.
brush-top can
Loctite®
Part #
Silver
__ *__
80209
_____
76732
Product
Color
Approx. Temperature K-Value Agency
Description
Viscosity (cP) Resistance
Approvals
ANTI-SEIZE COMPOUND ALUMINUM
Lubricant ideal for all Silver
120,000 - 1600°F (871°C)
0.18 MIL A-907E
metals to prevent
175,000
GM-6108M
seizing, galling and
Paste
76764
excessive wear.
Resists harsh chemical
environments.
C5-A
__ *__
__ *__
51144
ANTI-SEIZE COMPOUND COPPER
Lubricant ideal for use Copper
120,000 on softer metal parts
175,000
such as copper and
Paste
______
brass. Protects from
rust and corrosion as
well as prevents
seizing, galling and
excessive wear.
Excellent resistance
to harsh chemical
environments.
______
51147
______
51007
Nickel ANTI-SEIZE COMPOUND NICKEL
__ *__ Lubricant ideal for Silver
500,000 extreme temperature
350,000
__ *__ copper free base.
Paste
77124 Resistant to harsh
______
77164
NEW
Introduction!
2 ml Bullet Tubes
1800°F (982°C)
0.16
2400°F (1315°C)
0.13
Multiple Applications
in each Tube!
chemical environments.
Excellent for stainless
steel and other metal
fittings.
Versatile: Vibra-TITE Anti-Seize 907 is available in four different formulas:
1) 907A Aluminum-graphite is a
2) 907C Copper-graphite is a
general purpose lubricant.
general purpose lubricant. Ideal
Resists seizing, galling, galvanic
for soft metal parts, plastics and
attack, and excessive wear.
nonmetallic gasketing.
G A S K E T I N G & L U B R I C AT I N G
Vibra-TITE Available
Part #
Sizes
907A
__90702__ 2 ml bullet__
90704 4 oz.
90708 8 oz.
90706 16oz.
brush-top can
907C
__90712__ 2 ml bullet__
NEW! 90713
3 oz tube
90714 4 oz.
90718 8 oz.
90716 16oz.
brush-top can
The Anti-Seize 907 family of lubricants
is specially formulated to prevent
seizing, galling, pitting, excessive wear,
and corrosion. The lubricating formulation
is a protective paste consisting of fine
flakes of graphite suspended in a blend
of lubricants and oils. It will not wash,
squeeze or burn out, even at elevated
temperatures and high pressures.
3) 907N Nickel-graphite is a high
temperature lubricant suitable where
different metals (such as brass and steel)
come in contact. This product is also
available Pre-Applied.
13
CYANOACRYLATES
are single-part clear adhesives that rapidly
polymerize at room temperature and develop
strength extremely fast (fixture 0 to 60
seconds). They are initiated by moisture on
the parts surface or by accelerators.
Cyanoacrylates, commonly known as
Super Glues, are highly useful in virtually
every industry. Some of the higher volume
applications include printed circuit board
wires and a broad range of medical
devices.
OEM applications include small and large
appliances, automotive applications, toys,
and cosmetic packaging.
MRO applications include repair of
plastic, rubber and metal parts.
NEW
Everyday consumers are a large volume
user of Super Glues for use and repair on
everything from crafts to broken toys and
household gadgets.
Introduction!
#39502 2ml Resealable Bullet Tubes
15-25Applications in each Tube!
Factors that Effect CA Performance
• Low humidity = slower cure speed
• Low viscosity for small gaps
• Difficult to bond surfaces: Teflon, Silicone,
Polyethylene, Polypropylene
• Excess adhesive - Less is best
14
• Wire tacking on PC boards
• Ceramic, fabric, metal and leather bonding
• Bonding molded parts such as
automotive weather striping, wiper blades
• Speaker cones
• Identification tags to equipment
• Bonding control panel switches
• Bond rubber pads to equipment base or legs
CYANOACRYLATES
Vibra-TITE
Part #
C YA N O A C R Y L A T E S
Category Color
Approx.
Max Gap
Shear
Temperature Fixture Specific
Agency
Viscosity (cPA) (FILL, IN) Strength (PSI)
Range
Time Gravity
Approvals
GENERAL PURPOSE INSTANT SUPERGLUE
320
420
32002 2 ml bullet __ *__ Wicking type plastic
Ethyl
Clear
2
0.002
2,900
-65°F to +180°F
20
1.05 A-A3097 Type II
32028 1 oz bottle 42050 bonder.
seconds
CL1 Ethyl
32054 1 lb bottle
42061
CL 2 Ethyl
_______________________________________________________________________________________________________________________________________________________________
395
495
39502 2 ml bullet __ *__ General purpose.
Ethyl
Clear
45
0.004
2,750
-65°F to +180°F
20
39528 1 oz bottle 49550
seconds
CL1 Ethyl
39554 1 lb bottle
49561
GM-1183022
_______________________________________________________________________________________________________________________________________________________________
314
414
31402 2 ml bullet __ *__ Plastic bonder.
Ethyl
Clear
110
0.006
3,200
-65°F to +180°F
20
1.05
GM-1183023
31428 1 oz bottle 41450
31454 1 lb bottle
41461
seconds
_______________________________________________________________________________________________________________________________________________________________
362
498
36202 2 ml bullet __ *__ Thermal cycling.
Ethyl
Clear
125
0.006
3,600
-65°F to +180°F
30
1.09
N/A
36220 20 gm bottle __ *__
seconds
36254 1 lb bottle
49861
_______________________________________________________________________________________________________________________________________________________________
300
30002 2 ml bullet
General purpose.
Ethyl
Clear
250-350
0.006
2,500-3000 -65°F to +180°F
20
1.05
N/A
30028 1 oz tube
seconds
30054 1 lb bottle
_______________________________________________________________________________________________________________________________________________________________
344
444
34402 2 ml bullet __ *__ Wire tacking.
Ethyl
Clear
700
0.002
2,900
-65°F to +180°F
30
1.05
N/A
34428 1 oz bottle __ *__
seconds
34454 1 lb bottle
12294
_______________________________________________________________________________________________________________________________________________________________
316
416
31602 2 ml bullet __ *__ Gap filling
Clear
1,500
0.008
3,200
-65°F to +180°F
30
31628 1 oz bottle 41650 plastic bonder.
Ethyl
seconds
CL3 Ethyl
31654 1 lb bottle
41661
_______________________________________________________________________________________________________________________________________________________________
322
422
32202 2 ml bullet __ *__ Gap filling plastic
Ethyl
Clear
2,500
0.008
3,200
-65°F to +180°F
30
32228 1 oz bottle 42250 bonder.
seconds
CL3 Ethyl
32254 1 lb bottle
42261
_______________________________________________________________________________________________________________________________________________________________
311
382
31102 2 ml bullet __ *__ Gap filling –
Ethyl
Clear
5,000
0.008
3,200
-65°F to +180°F
30
1.05
N/A
31120 20 gm bottle 38240 wire tacking
seconds
31154 1 lb bottle
38261
_______________________________________________________________________________________________________________________________________________________________
309
409
30903 3 gm tube __ *__ General purpose gel.
Ethyl
Clear
Thixo Gel
0.01
3,200
-65°F to +180°F
75
30920 20 gm tube 40945
seconds
CL3 Ethyl
SURFACE INSENSITIVE SUPERGLUE
306
406
30602 2 ml bullet __ *__ Surface Insensitive
Ethyl
Clear
20
0.004
3,200
-65°F to +180°F
15
1.05
N/A
30620 20 gm bottle 40640 wicking grade.
seconds
30654 1 lb bottle
40661
_______________________________________________________________________________________________________________________________________________________________
301
401
30102 2 ml bullet __ *__ General purpose
Ethyl
Clear
90-120
0.005
3,200
-65°F to +180°F
15
1.05
N/A
30120 20 gm bottle 40140 surface Insensitive.
seconds
30154 1 lb bottle
40161
_______________________________________________________________________________________________________________________________________________________________
360
4471
36020 20 gm tube __ *__ Surface Insensitive.
Ethyl
Clear
500-600
0.007
3,000-3,500 -65°F to +180°F
15
1.05
36054 1 lb bottle
*
seconds
_______________________________________________________________________________________________________________________________________________________________
331
33120 20 gm tube __ *__ Surface Insensitive.
Ethyl
Clear 1,000-1,500
0.002
3,000-3,500 -65°F to +180°F
15
1.05
N/A
33154 1 lb bottle
*
seconds
_______________________________________________________________________________________________________________________________________________________________
354
454
35403 3 gm tube
45404 Surface Insensitive
Ethyl
Clear
Thixo Gel
0.01
3,000-3,500 -65°F to +180°F
30
GM-1183021
35420 20 gm tube 45440 for porous surfaces.
seconds
TOUGHENED SUPERGLUE
388
380
38802 2 ml bullet __ *__ Close fitting parts.
Ethyl Black
300
0.006
3,750
-65°F to +225°F
90
1.10
GM-1183025
38828 1 oz bottle 38050
seconds
38854 1 lb bottle
38061
_______________________________________________________________________________________________________________________________________________________________
310
410
31002 2 ml bullet __ *__ Gap filling.
Ethyl Black
3,500
0.008
3,200
-65°F to +180°F
90
1.07
N/A
31020 20 gm bottle 41045
seconds
31054 1 lb bottle
41061
METAL AND RUBBER BONDER
330
430
33028 1 oz bottle 43050 Metal bonder for
Methyl Clear
80
0.005
3,600
-65°F to +180°F
30
1.09
A-A3097 Type I
33054 1 lb bottle
43061 close fitting parts.
seconds
CL 2 Methyl
See page 18 for Vibra-TITE Accelerators and other surface preparation products.
15
Vibra-TITE Light Cure Adhesives
are single part photo-initiated
curing acrylates that cure on
demand when exposed to UV-light.
LIGHT CURE
ADHESIVES
Benefits:
• Almost instant cure
• Some cure with very low intensity
• Flexible or rigid products available
• High optical clarity & non-yellowing
• Bond a wide range of substrates
• Will not shadow-cure
• Jewelry-crystal and stone setting
• Glass ornaments, house-hold
objects and more
• One of the substrates must be clear
and transmit UV light
Special Note
• Vibra-TITE Light Cure Adhesives
are available in 10 ml and 30 ml
syringes if needed.
Vibra-TITE
Part #
211
21150
21100
220
22050
22025
22000
229
22950
22900
208
20850
20800
230
23050
23000
291
29150
29100
Available Loctite Product
Cure Type Color
Key
Viscosity
Elongation Shore Temperature Fixture
Shear
Suggested
Substrates Brookfield (cP) At Break (%) Hardness
Range
Time Strength (PSI) Activator
LIGHT CURE ADHESIVE
50 ml bottle
Low viscosity glass Ultraviolet/ Clear
Glass
100
100
D 80
-65°F to
10
2300
1 L bottle
bonder.
Visible
+250°F Seconds
LIGHT CURE ADHESIVE
50 ml bottle
Medium viscosity Ultraviolet/ Amber
Glass
1,200
-65°F to
3
2000
250 ml bottle
Glass bonder.
Visible
+250°F Seconds
1 L Bottle
349 LIGHT CURE ADHESIVE
50 ml bottle 34931 High viscosity
Ultraviolet Clear/ Glass, Metal
9,500
300
D 70
-65°F to
1,600
1 L bottle
34990 Glass bonder.
Straw
+266°F
UV STRUCTURAL ADHESIVE
50 ml bottle
Impact resistant
UV/
Opaque Glass,
Gel
100
D 70
-65°F to
10
2500
638
1 L bottle
gel.
Primer
Metal
+250°F Seconds
352 UV STRUCTURAL ADHESIVE
50 ml bottle 35241 Impact resistant
Ultraviolet/ Clear/ Glass, Metal
19,500
290
D 60
-65°F to
2,400
600/638
1 L bottle
35286 adhesive.
Heat/
Light
+374°F
Activator Amber
3921 ACRYLIC UV/VISIBLE WITH FLUORESCENCE
50 ml bottle __ *__ Medical device
Ultraviolet/ Clear to Glass, Metal
150
-65°F to
1 L bottle
36485 bonder.
Visible
Hazy/ Thermoplastic,
+300°F
Fluorescent Polycarbonate,
Polyvinylchloride
297
29750
29700
3971 ACRYLIC UV/VISIBLE WITH FLUORESCENCE
50 ml bottle __ *__ Needle bonder.
Ultraviolet/ Clear to
Metal
1 L bottle
36805
Visible
Hazy/ Thermoplastic,
320
-65°F to
+300°F
FluorescentPolyvinylchloride,
Polyurethane
250
25050
25000
255
25550
25500
294
29450
29400
265
26550
26500
215
21550
21500
50 ml bottle
1 L bottle
50 ml bottle
1 L bottle
50 ml bottle
1 L bottle
50 ml bottle
1 L bottle
50 ml bottle
1 L bottle
LIGHT CURE ADHESIVE
Ultraviolet/
Visible
LIGHT CURE ADHESIVE
Doming product for Ultraviolet/
metals.
Visible
LIGHT CURE ADHESIVE
__ *__ UV plastics bonder. Ultraviolet/
*
Visible
LIGHT CURE ADHESIVE
Light tacking
Ultraviolet/
adhesive.
Visible
LIGHT CURE ADHESIVE
UV/Visible potting Ultraviolet/
material.
Visible
Doming product for
plastics.
Clear
Plastics
6,000
Clear
Metals
6,000
Clear
Plastics
7,500
300
Clear
Glass,
Plastics
200
10
Clear
Glass,
Plastics
8,000
200
D 60
-55°F to
+188°F
3
Seconds
3000
-65°F to
+188°F
3
Seconds
2900
5
Seconds
16
STRUCTURAL ADHESIVES
Structural Adhesives, a Methacrylate technology,
are room temperature curing, 2-part, no-mix systems
comprised of resin and hardener that form structural
bonds on metal, composite, plastic, wood, ceramic &
many other substrates. They are ideal for parts where
extended open time is needed.
226
22650
22600
233
23325
23300
240
24050
24000
274
27450
27400
Color Viscosity (cP) Max Gap
at 20 RPM (FILL, IN)
312 NO-MIX STRUCTURAL ACRYLICS
50 ml bottle 31231 Fast cure on close Amber
1,000
0.003
1 L Bottle 31243 fitting parts.
50 ml bottle 32530 Severe environment Trans20,000
0.040
1 L bottle
32586 applications.
parent
Solvent resistant. Dark
Brown
50 ml bottle 32629 Fast fixturing
Trans18,000
0.0420
1 L bottle
32685 applications.
parent
Dark
Brown
25 mlcartridge __ *__ Rough or porous
Pale
67,500
0.005
1 L bottle
33081 surfaces.
Yellow
50 ml bottle 39250 Fast fixturing
Amber 6,500/17,500
0.025
1 L Bottle
39280 magnet bonder.
Thixotropic
NO-MIX STRUCTURAL ACRYLICS
50 ml bottle
Amber
3200
0.01
1 L Bottle
Shear
Strength (PSI)
Temperature Fixture Time Specific Suggested
Range
Gravity Activator
3,000
-65°F to +300°F
30 seconds
1.08
638
2,200
-65°F to +300°F
5 minutes
1.11
638
3,500
-65°F to +250°F
1 minute
1.10
638
3,300
-65°F to +250°F
5 minutes
1.05
638
2,500
-65°F to +300°F
1 minute
1.16
638 / 600
2,300
-65°F to +250°F
1 minute
1.1
611
Primers, Accelerators & Activators
Vibra-TITE
Part #
600
60028
60025
60000
638
63800
611
61102
61108
61100
612
61202
61208
61200
621
62102
62104
62108
62100
623
62302
62304
62308
62300
624
62402
62404
62408
62400
Color Viscosity
Base
On-Part Life
(cP)
7380 Structural Activator
1 oz bottle
__ *__ Structural
Light
43
Monomer
2 Hrs
250 cc bottle __ *__ activator.
Brown
1L
*
7387 Structural Activator
1L
*
General structural Light
1.5
Heptane/
2 Hrs
activator.
Brown
Isopropanol
7649 Excel Primer N
2 oz bottle
__ *__ General purpose Clear/
2
Acetone
30 Days
8 oz bottle __ *__ primer.
Green
1 gal can
19266
7471 Excel Primer T
2 oz bottle
__ *__ Fast acting
Amber
Acetone/
7 Days
8 oz bottle __ *__ primer.
2
Isopropanol
1 gal can
19268
7113 Excel Accelerator
2 oz bottle
__ *__
Clear
0.4
Heptane
24 Hrs
4 oz bottle __ *__
8 oz bottle __ *__
1 gal can
19606
Excel Accelerator
2 oz bottle
General purpose Clear/
1
Heptane
1 Minute
4 oz bottle
accelerator.
Amber
8 oz bottle
1 gal can
712 Excel Accelerator
2 oz bottle
__ *__ Accelerator for
Clear/
1
Isopropanol
1 Minute
4 oz bottle __ *__ plastics.
Amber
8 oz bottle __ *__
1 gal can
18390
Dry Time
Application
None
Structurals
None
Structurals
30-70 Seconds
Anaerobics
30-70 Seconds
Anaerobics
1 Minute
All
Cyanoacrylates
1 Minute
All
Cyanoacrylates
<30 Seconds
All
Cyanoacrylates
Vibra-TITETM is a trademark of ND Industries, Inc. ®Loctite is a registered trademark of the Henkel Corporation.
Vibra-TITE surface
preparation products
promote maximum
performance of
adhesives and sealants.
BONDING PRODUCTS
Vibra-TITE
Part #
212
21250
21200
225
22550
22500
Benefits:
• Kits comprise brush-on initiator
and resin (from a syringe)
• Toughened - high peel strength
and impact resistance
• Very rapid curing
• Rapid curing
• High shear strength
• Good chemical resistance
17
BONDING PRODUCTS
Vibra-TITE offers a wide range of bonding products including Epoxies, Hot-melts,
Urethane, and MMA’s designed to meet a variety of assembly requirements. Ask your
sales representative for a complete list of dispensers and mix nozzles.
Epoxies
Vibra-TITE Available
Part #
Sizes
210
21006 6 pk clamshell
21000 400 pc. bulk
910
91050
91040
50 ml dual cartridge
Product
Description
(FILL, IN)
UNIQUE SINGLE-USE NO MEASURING EPOXY
2-part Epoxy System Clear
100,000
in a single-use pack.
to
No Mess - No Waste
Gray
2-PART EPOXY
Compare to
White
125,000
0.25
3M DP190®
990
99050
99040
FLEXIBLE TOUGHENED 2-PART EPOXY
Compare to
Amber
8,000
3M DP420®
920
92050
92040
HIGH PEEL / HIGH SHEAR 2-PART EPOXY
White
25,000
or
Black
Shear
Strength (PSI)
Temperature Fixture Time Specific
Range
Gravity
550 Metal to Metal
460 Wood to Wood
65 Nylon to Nylon
40 C to 100 C
30-60 Min.
1400
-65°F to +300°F
5 minutes
1.1
0.07
1500
-55°F to +200°F
240 Minutes
1.14
0.1
3500
-55°F to +250°F
120 Minutes
1.14
Hot-melts / Urethane
Vibra-TITE
Part #
917
91755
5 lb brick
963
96355
5 lb brick
989
98902
98904
98900
2oz.
4oz.
1 L bottle
Available
Hot-melts
Sizes
Product
Description
PRESSURE SENSITIVE HOT MELT
White
36,000
N/A
@350°F
HOT MELT GASKETING COMPOUND
White
36,000
N/A
Strength
Temperature Fixture Time Specific
Range
Gravity
12.5 pli
-65°F to +200°F
N/A
0.91
0.5
-65°F to +210°F
N/A
0.92
Typical Values:
Substrate failure
-40°F to +200°F
90 Minutes
1.1
URETHANE
Light
Brown
7,000
0.05
MMA’s
Vibra-TITE
Part #
285
28550
281
28150
282
28237
28240
Available Plexus®
Sizes Product
300
50 ml
*
cartridge
310
50 ml
*
cartridge
320
37 ml cart. __ *__
370 ml cart. *
Product
Description
MMA 5 MINUTE
General purpose.
MMA 10 MINUTE
High strength.
MMA
Flexible.
18
Vibra-TITETM is a trademark of ND Industries, Inc.
®Plexus is a registered trademark of Illlinois Tool Works Inc.
Shear
Strength (PSI)
Mix Ratio
by Volume
Temperature Fixture
Range
Time
Specific
Gravity
Off
White
100,000
0.1
4500
1 to 1
-40°F to +250°F 5 Minutes
1.1
Off
White
100,000
0.1
4600
1 to 1
1.1
White
150,000
0.125
2000
10 to 1
1.1
REACT-A-PACK
NEW
Introduction!
A Complete 2-Part Epoxy System
in a Single-Use Pack!
S P E C I A LT Y P R O D U C T S
React-A-Pack Epoxy is a system that delivers the advantages
of a 2-part epoxy adhesive in a single pack. Inside the pack
the epoxy resin and hardener are separated by a patented
process. When mixed by mashing the hardener and resin
together the product becomes a five minute epoxy with the
advantage of no mess and the correct mix ratio in every pack.
Part #21006 – 6 Pack Clamshell
Part #21000 – 400 Pc. Bulk
No Measuring!
No Mess!
• General purpose epoxy bonds plastic, steel, ceramic and wood.
No Waste!
Suggested Uses
Great for wire nuts and outdoor electrical applications.
•
•
•
•
Will not run or drip on Works great on household
items, furniture and cabinetry.
vertical applications.
Electric: Sealing wire connectors, lawn sprinkler systems, pumps.
Auto: Trailer wire connectors.
Marine: Loose screws in fiberglass, wire connector seal & vibration proof.
Home: General adhesive needs, furniture, loose wallboard hooks & screws,
sealing, towel bars, fillet & supports, candle holder sockets.
D riveGrip
TM
Anti Cam-Out
Fluid
Increases the grip-strength
between the fastener
head and tool by
as much as
BENCH
PACK
5
A must for
every tool box!
Vibra-TITE Bench Pack 5
is a handy assortment of our
most popular threadlockers,
a retaining compound and
DriveGrip anti cam-out fluid
in a light weight clear plastic
container.
700%
Part #47002
.5 oz. Tube in cello
bag for easy display
and handling.
Part #27005
Use with:
• Screwdrivers of all kinds • Hex Keys • Pliers • Vise Grips
• Unlimited shelf-life
• Odorless, non-toxic, non-corrosive • Channel Locks • Open-end & Box-end Wrenches
• Works instantly, won’t irritate skin
• Wipes clean, no staining
• Works great in applications where fastener heads or drives are worn or damaged.
• Eliminates tool wear, rounding, and deforming of fasteners.
• Eliminates the need for specially designed screwdrivers.
DriveGrip
Anti cam-out fluid
makes it easy to remove
or tighten screws!
Vibra-TITE 541
High Strength Retaining
Compound
Prevents Driver
Slippage
Reduces Worker
Fatigue
Prevents Stripped
Screws
Vibra-TITE 121
Medium, Removable
Strength Threadlocker
Vibra-TITE 140
High Strength
Threadlocker
Vibra-TITE 150
Wicking Grade, Medium
Strength Threadlocker
COMPARE TO LOCTITE 242®
Vibra-TITETM, BenchPack 5TM and DriveGripTM are trademarks of ND Industries, Inc. ®Loctite and Loctite 242 are registered trademarks of the Henkel Corporation
19
CHEMICAL BLENDING, CUSTOM SERVICES,
TOLL BLENDING AND PRIVATE LABELING
Your Formula Supplied in Bulk or Bottle
ND Industries manufactures annually in
excess of 1 million pounds of a wide variety
of Vibra-TITE Adhesives, Anaerobics,
Cyanoacrylates,
Epoxies,
Urethanes,
Ultraviolets, MMA's, Acrylics, and more
offering custom service formulation and toll
blending to meet specific customers' needs.
COMMITTED TO YOU AND YOUR CUSTOMERS
Vibra-TITE products can be supplied to suit your specific needs. We are dedicated to providing
innovative, affordable products and services.
ND Chemical Blending offers services for:
• Toll Blending
• Supply (In Bulk or Bottle) of:
- Anaerobic Adhesives
- Threadlockers
- Retaining Compounds
- Sealants
- Structural Adhesives
- Cyanoacrylates
- 2 part Epoxies
- Urethanes
CREATE YOUR OWN UNIQUE BRAND IDENTITY
ND Industries manufactures many adhesives and sealants for private label use and can
fill, label, and package bottled products to your specifications. ND can
also supply bulk materials if your company does not require packaging services.
ND provides private labeling services including design and production with quantity
requirements substantially lower than our competitors.
20
VERSATILE, POWERFUL, COST-CUTTING TECHNOLOGY
In the high-tech world of manufacturing, tolerances are tight and specifications are rigid. Consequently,
locking, sealing, bonding, and assembly related products and processes designed to meet these
requirements are generally associated with high cost, and in many cases, slow response times. As a
vertically integrated supplier ND Industries provides cost effective, highly responsive alternatives to
products and services from companies such as Loctite®, 3M®, and others.
ND Industries provides top quality fastening and assembly related products and services, specializing
in threadlockers, sealants, anaerobics, lubricants, adhesives and more to a wide range of industries
including automotive, electronics, aerospace, marine, construction,and appliance.
Our engineering and chemical research capabilities, along with a strong emphasis on individualized
problem solving, constantly lead us to the development of the most cutting-edge original technologies.
That means new products with improved results.
A VERTICALLY INTEGRATED SUPPLIER
This means we do it all from top to
bottom; we’re a one-stop source providing
design engineering, custom chemical
formulations and distribution.
Our in-house capabilities help us fulfill
multiple functions for our customers and,
at the same time , keep our overhead low.
This allows us to provide high quality
products and services at costs generally
lower than our competitors.
TECHNOLOGY AND SERVICES
ND’s specialized team of chemists are
second to none. They are hard at work
developing customized applications to
meet individual customer's needs.
ND Industries is ISO certified.
Vibra-TITETM is a trademark of ND Industries, Inc. ®Loctite is a registered trademark of the Henkel Corporation, 3M is a registered trademark of Minnesota Mining and Manufacturing Co.
21
INERT LOCKING
ND's service centers can Pre-Apply ND products on ND-supplied
fasteners or on fasteners that you supply. ND’s service centers are
tooled with state-of-the-art fastener processing equipment to
provide quality products and rapid distribution.
ONE OF THE INDUSTRY’S BROADEST PRODUCT LINES
ND offers a wide range of fastening and assembly related products
and processes that exhibit one or more of the following characteristics:
Locking
Sealing
Bonding
Lubricating
Re-Useability
Cushioning
Insulating
Identification
Noise & Vibration Reduction
Minimize Galling/Stripping
Masking
Temporary Retention
ND categorizes its products by their physical properties: Inert
Coatings, Reactive Coatings, Formed Products, and Special
Products. ND also offers customized formulations for your unique
fastening and assembly needs.
ND STRIP®, ND PELL-IT®,
SOFT TOUCH TIP® PELL-IT, SURE TEMP®
ND PATCH® & 3600 RING PATCHTM
VIBRA-TITE® VC-3 ORIGINALTM
ND inserts are offered in Nylon,
KEL-F® or VESPEL® which ND
automatically inserts into a fastener, making it self-locking and selfsealing, yet fully adjustable.
ND Patch products make threaded fasteners self-locking and selfsealing, while leaving them fully
adjustable. Compare to Tuf-Lok®..
Vibra-TITE VC-3 Original is not an
anaerobic or an adhesive. It is a
unique blend of acrylic resins that
makes any threaded fastener selflocking and self-sealing, while
remaining service removable.
EPOXY-LOCK®
ND MICROSPHERES®
EXPAND-A-SEAL ES0105®
ND Epoxy-Lock® is a powerful
ND Microspheres® is offered in
locking/ sealing adhesive which is
pre-applied to either male or
female threaded fasteners. Though
the adhesive surface is dry to the
touch, the forces of engagement
initiate a chemical reaction.
acrylic and epoxy formulations,
available in pre-applied or in bulk for
application by other fastener
coater/converters. Compare to
3M® Scotch-Grip®, Loctite DriLoc®, & omniTECHNIK PreCoat®.
Expand-A-Seal ES0105 is an
original 2-in-1 application and
the most effective way to simultaneously lock and bond fasteners
and seal against all air and fluid
leakage.
REACTIVE LOCKING
With its growing family of fastening and assembly products and
services, ND meets or exceeds many of the rigorous standards
established by the automotive, aerospace, and defense industries.
Customers Served:
DAIMLERCHRYSLER
GENERAL MOTORS
FORD MOTOR COMPANY
BOEING
LOCKHEED MARTIN
JOHN DEERE
MACK TRUCK
CUMMINS ENGINE
VOLKSWAGEN
Accreditation:
QS 9000 Registered
ISO 9002 Registered
ISO17025 Registered
AS 9000 Registered
QPL-18240 Listed
QSLM Registered
Member Industrial
Fasteners Institute
ADVANCED SEALING
ST-3®
ND PLASTISOL® APPLIED-TO-METAL
ND PLASTISOL® OPEN MOLD
ND MASTICS & EXPANDABLES
FORM RINGS®
ST-3® is designed to be applied by
ND or on the customer’s automated
band coating equipment or tumble
coater. Compare to 3M® ScotchGrip® 4291, and Loctite® VibraSeal® 516, 517, 503, and 503H.
ND Plastisol Applied-To-metal
provides a positive seal that
eliminates leaks. It is available in
a wide variety of durometers and
colors.
ND Plastisol Open-Mold are parts
made of moldable PVC materials
that can seal, trim, cushion, insulate
and control noise and vibration…
often at a fraction of the cost of die
cutting and injection molding.
Crushable mastics evenly fill and
seal all voids and are applied by
the assembler. Heat causes the
material in Expandables to expand
and adhere to metal, creating a
seal while filling in the gaps.
Form Rings® are mashable
polyamide rings for sealing
threaded and unthreaded fasteners.
Form Rings® are ideal for on-thejob applications to a wide variety
of nails, screws, bolts, and rivets.
ASSEMBLE EZ
MASKING & LUBRICATING
ND ANTI-SEIZE 907TM
ND Anti-Seize compounds are
formulated to prevent seizing,
galling, pitting and excessive wear
and corrosion. ND Anti-Seize will
not wash, squeeze or burn out.
22
LM-1293®
An automotive approved process,
ND LM-1293 is a Teflon-type fastener coating that lubricates and
prevents undesirable substances
from adhering to fastener
threads. Compare to Nycote®.
ND EZ DRIVE 200™
ND STAY-PUT®
ND COLOR CODETM
ND EZ Drive 200 is an ergonomic
assembly aid designed to
increase installation efficiency
by reducing friction by as much
as 75%.
ND Stay-Put provides temporary,
dependable retention for fasteners or other components prior to
and during the assembly
process.
Whether your need is to identify
some special characteristics or to
color match a fastener head to a
mating surface, ND is your
source for color identification.
ND Pre-Applied Product / Industry
Cross Reference Chart
ND Pre-Applied
Process
Compare To
ND Epoxy-Lock ............................. COMPARE TO ................ 3M Scotch-Grip, Loctite Dri-Loc, PRECOTE 80
ND Microspheres 593-S ................ COMPARE TO ................ 3M® Scotch-Grip®2353 & 4844
ND Microspheres 1193-S .............. COMPARE TO ................ 3M Scotch-Grip 2451 & 2510
ND Microspheres TA300 ................ COMPARE TO ................ PRECOTE® 30
ND Microspheres TA800 ................ COMPARE TO ................ PRECOTE® 80
Epoxy-Lock®
®
ND Microspheres TA850 ................ COMPARE TO ................ PRECOTE 85
ND Microspheres AA0695.............. COMPARE TO ................ Loctite® Dri-Loc® 200
ND Microspheres AA0696.............. COMPARE TO ................ Loctite Dri-Loc 200
ND Microspheres® Epoxy Type
ND Microspheres AA1195.............. COMPARE TO ................ Loctite Dri-Loc STS
ND Microspheres AA1196.............. COMPARE TO ................ Loctite Dri-Loc STS
ND Microspheres® TA Series
ND ST-3-W ..................................... COMPARE TO ................ 3M Scotch-Grip 4291
ND ST-3-L3 .................................... COMPARE TO ................ 3M Scotch-Grip 4291
ND ST-3-L4 ................................... COMPARE TO ................ Omni TECHNIK PRECOTE® 5
ND ST-3-L5 .................................... COMPARE TO ................ Loctite Vibra Seal® 503
ND ST-3-L5A .................................. COMPARE TO ................ Loctite Vibra Seal 503HV
ND ST-3-L6 .................................... COMPARE TO ................ Loctite Vibra Seal 516
ND Microspheres® Acrylic Series
ND ST-3-L7 .................................... COMPARE TO ................ Loctite Vibra Seal 517
ND ST-3-L8 .................................... COMPARE TO ................ Loctite Vibra Seal 503 mod
ND ST-3-L8A .................................. COMPARE TO ................ Loctite Vibra Seal 503 HVmod
ND ST-3-L10 .................................. COMPARE TO ................ Loctite Vibra Seal 517 mod
ND ST-3-L11 .................................. COMPARE TO ................ Loctite Dri-Seal 506
ND ST-3-L13 .................................. COMPARE TO ................ Loctite Dri-Seal 513
Call: 248-288-0000 or visit: www.ndindustries.com
ST-3 Masking / Lubricating
®3M & Scotch-Grip are registered trademarks of the Minnesota Mining & Manufacturing Company. ®Loctite, Dri-Loc and Vibra-Seal are registered trademarks of Henkel Corporation.
®PRECOTE is a registered trademark of PRECOTE USA. ®ND and ND Industries are registered trademarks of ND Industries, Inc.
23
A Trademark of ND Industries
ND Vibra-TITE Divisions
Orders in USA: ND Division #19 – Sanford, Florida
PH: 1-800-521-2663 • FX: 407-322-5679
Orders outside USA: ND Division #10 – Troy, Michigan
PH: 248-655-2580 • FX: 248-655-2582
Orders in Mainland China: ND Adhesive Technology (Shanghai) Co., Ltd – Jiading District, Shanghai
PH: 86-021-59959049 • FX: 86-021-59959045
ND Western
Fastener Processing Division
Santa Fe Springs, California
ND Midwestern
Fastener Processing Division/Cleveland
Twinsburg, Ohio
ND Southwestern
Arlington, Texas
ND Southeastern
Charlotte, North Carolina
ND Midwestern
Fastener Processing Division/Chicago
Northbrook, Illinois
Rockford, Illinois
ND Eastern
Oakland, New Jersey
ND Midwestern
Fastener Processing Division/Detroit
Clawson, Michigan
ND Industries Asia, Inc./Taiwan
Kaoshiung, Taiwan R.O.C.
ND Electronics (Kunshan) Co., Ltd.
Kunshan City, China
Corporate Offices
1000 North Crooks Road · Clawson, Michigan 48017 USA · Phone: 248-288-0000 · Fax: 248-288-0022
Visit our web site at www.ndindustries.com · e-mail: ndinfo@ndindustries.com

(Vibra-TITE) Interchange

Transcription

Similar documents

Blow Molds

Water Xylophone - Abu Dhabi Science Festival

Liquor Capabilities Presentation

SAPS - Making an eco

LED Catalogue

Océ TDS450 - A/E Graphics, Inc.

See you 13th April. Di Loxton - The Decoupage Guild of Queensland

Specification Brochure

wine menu - Brooks Country House

Welcome to Dr Bob`s retro-fit quick-fill system