Knauf Wedge Anchor

Technical Datasheet
Knauf Wedge Anchor
Wedge Anchor is an accessory which can be used as a best solution for Knauf Ceiling Systems,
perimeter fixing for ceiling and for partitions where fire resistance is required.
05- 2015
Knauf Wedge Anchor
Product Description
Properties
Wedge Anchor is an accessory which can
be used as a best solution for Knauf Ceiling
Systems, perimeter fixing for ceiling and for
partitions where fire resistance is required.
Freatures
Fire - Resistant
Fast & Easy to apply
Zinc Electro-plated minimum 5 um l
according to EN12329-
Applicable for cilings, perimeter fixings
Standard Length Plus
and fire-resistant Partition systems
Fixing Dimensions: 6 x 40 mm
Maximum Fixture Thickness: 10 mm
Performance Data
Effective embedment depth
[mm]
30
Characteristic resistance
[KN]
3.05
Design resistance*
[KN]
1.2
Characteristic resistance
[KN]
6.84
Design resistance *
[KN]
2.7
Characteristic resistance
[KN]
6.15
Design resistance *
[KN]
2.45
Cracked Concrete C25/20
Non-Cracked Concreate C25/20
Solid Brick 15 Mpa
Installation Data
Anchor Diameter
6 mm
Hole Diameter
6 mm
Hole Diameter in fixture
7 mm
Minimum hole depth
35 mm
Effective embedment depth
30 mm
Minimum substrate thickness
50 mm
Minimum spacing
30 mm
Minimum edge distance
30 mm
Base Materials
Concrete (Both cracked and non-cracked zone)
Solid Brick
Stone
* With Partial safety factor 2.5, unless other national safety factors are applicable
Please contact our sales department for inquiries about storage and packing.
Knauf Head Office
Phone: +971 4 337 7170
Fax: +971 4 334 9659
P.O. Box: 112871, Dubai
info@knauf.ae
Knauf Qatar Branch
P.O.Box 27111
Doha, State of Qatar
Tel: +974 44528191
Fax: +974 44528181
Knauf Manufacturing Plant
P.O.Box 50006
Ras Al Khaimah, U.A.E.
Tel: +971 7 221 5300
Fax: +971 7 221 5301
Made in UAE
The information provided in this leaflet is only intended to give guidance in selecting and using Knauf products. While we make every effort to ensure its accuracy, neither Knauf LLC and its branches
nor any of this employees or affiliates warrant or assume any legal liability or responsibility for the completeness or usefullness of any failure in installation or constructing structure installation or builiding
or caused by using this leaflet. Readers are adviced to independently verify this information prior to reply on it. In particular, readers must obtain appropriate independent advice on the use of products in
specific structures, installations or buildings to ensure compliance with all regulations, in cluding health and safety regulations. Knauf reserves the right to amend technical specification without notice.
www.
.ae
The constructional and structural properties, and characteristic building physics Knauf system can solely be
ensured with the exclusive use Knauf system components, or other product expressly recommended by Knauf.