Insul-Koat - Thermal Insulation Tiles

Marvel Insul-Koat
Nano Technology
MARVEL INSUL-KOAT
NANO TECHNOLOGY
MARVEL INSUL-KOAT is a remarkable new heat reflecting
roof coating utilising revolutionary Thermal Protection
Technology developed by JAPEVA Engineering Pvt.Ltd., to
reduce the temperature inside the building in hot weather. This
will save energy and cooling costs. It will also reduce greenhouse
emissions and the impact of building on the environment while
the roof looks great. MARVEL INSUL-KOAT will keep the
surface of your roof up to 25°C to 30°C. Inside the temperature
will be reduced around 4°C to 6°C less and making the room
cooler. Suitable for Roof top, Terrace, AC Sheets, Metal Roof,
sloping roof, exterior wall, parapet wall.
Heatproofing
TM
insulla
Planet Protection
Marvel Insul-Koat
Nano Technology
Waterproofing System Using Nano Technology & Multi Ceramic Technology
Terrace & Parapet Walls
Total System high water resistance vapour permeable, resistance to moisture, UV stable, heat resistance.
Marvel Supercrete HR is polysiloxane base coating acts as a base coat and Marvel Felxibond is top coat which eliminates
conventional brick bat coba system also eliminates replastering of parapet and exterior damp walls.
Marvel Supercrete HR, Polysiloxane base coating all nanoparticles penetrates into cracks at the same time
multiceramic technology base particles float on the top to bottom of the coating which creates water resistance
and hydrophobicity.
With the help of nanotechnology and multiceramic technology we creates high performance waterproofing parameters
are as follows:
.
Water repellent
.
Water impermeability
.
Water vapour permeability.
.
Hydrophobility
.
UV Stability
.
Heat resistance.
.
High inertness
.
High penetration.
Due to combination of nano and multiceramic technology product gives high performance at the
same times gives high dft with high coverage.
Due to nanotechnology product gives high coverage as well as high dft because nanoparticles
covers high surface area, when nanoparticle reacts with multiceramic particles both the
particles crosslink with each other and when it dries cross link network expand 100 times
and we get high dft and high coverage.
As a direct result of coating your roof with MARVEL INSUL-KOAT the reduced
requirement for air conditioning will save you money due to;
.
Water savings from reduced evaporative air conditioning
.
Reduced electricity usage conserving energy and valuable resources
.
Lower urban heat island build up resulting in reduced ozone and healthier living
.
Encourages recycling of older viable roof structures
.
Cooler buildings mean reduced chemicals and pollution for healthier cities
.
Cooler homes mean less dehydration and chemical emissions
.
Reduced product replacement costs and maintenance including air conditioning,
roof structure and roof located appliances such as hot water services and electronics.
Heatproofing
Insul Koat - Systems
MARVEL SUPERCRETE HR
(HEAT RESISTANCE POLYSILOXANE COATING)
DESCRIPTION:
MARVEL SUPERCRETE HR is polysiloxane modified heat resistance waterproof
coating.
It is nano tecnology and multi ceramic technology base high performance surface
coating.
WORKING PRINCIPLES:
When MARVEL SUPERCRETE HR is applied on the surface nano technology base
polysiloxane reacts with cementitious substrate and all nanoparticles penetrates
into capillary and forms hydrophobicity. Multi ceramic technology base particles
remains active on top and bottom of the coating which is 100% inert and
nonconductive material, hence it gives high water resistence as well as heat
resistance property.
SPECIALAPPLICATION PROPERTY:
When applied on cracks it penetrates into cracks and no crack filling is required.
APPLICATION PROCEDURE:
First remove all loose particles then clean the surface by water to remove oil, grease
and other loose materials contaminated on the surface then wet the surface with
water, then apply two coats of it diluted with 60% water.
COVERAGE : 30 Sq.ft in one coat
APPLICATION AREAS:
All cementitious surface ans china chips, e.g, parapet wall, new terrace slab,
old terrace surface (on ips, tiles, china mosaic), sunken slab, damp wall, new toilet
bathroom concrete surface, old toilet bathroom mineral substrate.
PACKING: 20 Kg
MARVEL FLEXIBOND
DESCRIPTION:
MARVEL FLEXIBOND is elastomeric heat reflective coating made from
polyurethane, acrylic and silicon emulsion modified with multi ceramic and nano
technology.
TM
insulla
Planet Protection
PROPERTIES:
. Elastomeric.
. Heat Reflective.
. Water resistance.
. Water and Co2 vapour permeable.
. Sulphate and chloride resistence.
. Anti fungus.
. Breathable.
. Water Repellent.
TECHNICAL DATA:
. Base : Polyurethane acrylic silicon emulsion.
. Solid Content: 50 - 52%.
. Colour : White or as per customer requirement.
. Modifier : Multi ceramic and nano technology base materials.
. Viscosity : 250 - 500 cps.
. Ph : 8.5 to 9 .
. Flexibility : 300%. DFT in two coat : 1000 microns.
. Recommended coat : Two
APPLICATION AREAS:
Coating on cementitious and mineral substrate where durability of water proofing
is desire like flat roof, sloping roof, exterior wall, parapet wall and A.C.Sheets.
Heatproofing
Marvel Insul-Koat
Nano Technology
LIMITATIONS
• Minimum application temperature of substrate is 40°F (4°C) and rising. Low temperatures adversely affect flowability
and strength gain.
• Cold temperatures lengthen working time, hot temperatures decrease working time.
• Do not thin with solvents.
• Do not inject moving or leaking cracks.
• Minimum age of concrete must be 21 to 28 days, depending on curing and drying conditions prior to application.
• For cracks over 1/2 inch (13 mm), call JAPEVA Engineering Pvt.Ltd., at Chennai.
CAUTION
Irritant, toxic, strong sensitizer. Contains epoxy resin and amine. This product may cause skin irritation. Do not inhale vapors.
Provide adequate ventilation. Protect against contact with skin and eyes. Wear rubber gloves, long sleeve shirt, goggles with
side shields. In case of contact with eyes, flush repeatedly with water and contact a physician. Areas of skin contact should
be promptly washed with soap and water. Do not take internally. Keep product out of reach of children.
PRIOR TO USE, REFER TO MATERIAL SAFETY DATA SHEET.
S P E C I F I C AT I O N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The surfaces must be waterproofed and/or protected with twopack cementitious skimming plaster with JAPEVA technology of
the MARVEL INSUL-KOAT type by JAPEVA Engineering Pvt.Ltd., applied by roller or brush in two coats each 1 mm thick.
The product must guarantee crack bridging ability at low temperatures (-20°C) and the immersion in clorinated water
performance.
JAPEVA reminds you to examine the “notes” document that completes the information in this data sheet.
The document can be downloaded in the pdf format.
The advice about technical matters and applications in the technical data sheets, or given verbally or in writing by our personnel as part of our customer
assistance service, are the result of our best and most up to date experience. Since we are unable to personally modify the conditions in the building site or the
way the work is carried out, this information is purely indicative and, thus, binds us neither legally nor in any other way in relation to third parties. This information
does not relieve the end user from being responsible for testing our products so as to make sure they are fit for the required use. We therefore strongly advise the
customer/user to subject JAPEVA’s products to preventive tests in order to ensure that they are suitable. The end user is also responsible for checking to make
sure that this technical data sheet is not obsolete and that more recent editions have not replaced it. Thus, before using out products, you are advised to download
the most up to date version of the technical data sheet from our web site www.insulla.com.
TM
JAPEVA
ENGINEERING PVT.LTD.,
#115, MB Plot, Vanagaram Main Road, Metro Nagar, Alapakkam, Chennai-600 116.Tamil Nadu. India.
E-Mail: japevaengg@gmail.com web:
www.insulla.com
Phone: 91-44-24 76 62 12 / 30 62 62 62 / 8056-345678