Radiotechnika Marketing

State-of-the-art Technologies In Practice
State-of-the-art
Technologies in Practice
The mission:
To offer effective leading edge
technologies to our customers
For over 60 years of its business activity
Radiotechnika has always been aiming to
satisfy our clients’ requirements. The company products have been designed and
made to fulfill these needs and live up to
market and competitors conditions. This
philosophy has been continuously developed
and improved till present days.
3500 m
2
facility, includes 1000 m2
for manufacturing and 1000 m2 warehouse
market oriented manufacturing facility
focussed and effective research
and development department
customer friendly embedded logistics
The market of electronic equipment,
particularly this designated for special application, challenges for very high regimen
of technology and organization. We are able
to meet these requirements, because our
employees are highly skilled, experienced,
supported by comprehensive base of research together with production equipment and fully aware of market demands.
Nothing would motivate us better than
the increasing market demands of today’s
world. This is what makes us constantly
improve the existing technologies and
products as well as to mark new trends
in our business area. We are for instance
offering new possibilities concerning not
only the examination of electronic devices
in our profiled laboratory of environmental
and electromagnetic compatibility but also
developed advisory system or – if needed
– a set of readymade solution systems
that will make your products meet all
EMC requirements.
We strongly believe that by offering such
a wide range of research and development
based services we can reach new customers
and assure the ones who already know
us, that continuous cooperation with
Radiotechnika Marketing in the area of
applying new technologies should be the
most satisfying and profitable solution.
and buffer stock
convenient location
Marek Dras
President
The History
Radiotechnika Marketing continues the
manufacturing tradition of Radiotechnika
Co-operative, one of the oldest companies
in Poland and the oldest electronic company in Wrocław.
The building damaged after the WWII. 1954.
1947
Co-operative „RADIOTECHNIKA” was established in Wrocław,
by the former employees of „Elektrit” domestic radio set manufacturer, located in Vilnius before the WW II.
1950 – 1973
Manufacturing of transformers. 1958.
Radiotechnika developed production of radios, including car
radios, ultrasonic defect-scopes and concrete-scopes, oscilloscopes, automobile diagnostic equipment, gas analysers, latest
systems for wireless transmition of maps and drawings.
1973
Radiotechnika was nationalised and incorporated into KABiD
conglomerate as Electronic Appliances Plant - ZAE Radiotechnika.
Exhibition at International
Poznan Fairs. 1967.
Synoptograph RH-2 for wireless drawing
transmission. 1968.
R&D department. 1968.
OK16 oscilloscope fine tuning. 1970.
BI-8 reflectoscope for concrete tests.1968.
SPR-2 Radio-set. 1952.
Broadcasting set. 1952.
1973 – 1990
ZEA Radiotechnika becomes the biggest producer of oscilloscopes
and automotive diagnostic equipment of the Eastern Block.
1991
Privatisation of Radiotechnika throughout employees leasing.
1992
Establishing of Radiotechnika Marketing Ltd, based on
the employees of the research and development department.
OS-3 car radio-set for
Warszawa M-20 car. 1956.
1993
Start as a distributor of electronic appliances and components.
1997
Recreation of own production based on the new technologies.
2003
ISO 9001:2001 and AQAP 2110:2003 Certificates.
KR-8006 automobile diagnostic
appliance. 1981.
2007
New location.
2010
Electromagnetic compatibility and environmental testing
laboratory starts its activity.
Electromagnetic compatibility
(EMC) and environmental testing
laboratory starts its activity. 2010.
Radiotechnika’s logo
through the years
Gold medal at the INFOSYSTEM
fairs for Vizy Lock system. 1997.
KR-7401 data-storage
oscilloscope. 1986.
The people
Every company is created by its people.
Their knowledge, personality, activity and
relationships with customers are building
a company’s success and image on the
market. Who are Radiotechnika’s people?
Our employees are highly qualified professionals. Most of them are with us
for more than ten years. We rely and depend on their deep technical knowledge, interdisciplinary skills and ability to learn and serve the market in the
best possible way. At present, the company employs over 100 people.
At your disposal:
Product managers
Thanks to the technical and commercial knowledge of the
product range and market segment they are responsible for,
our Product Managers will help you find the best solutions
within our offer, point out innovative technologies and lead
you towards new technical possibilities.
Branch Representatives
Our branch offices are located in Warsaw, Katowice, Gdańsk
and Łódź. Our representatives are thus closer to our customers
and always ready to react to your needs with an immediate
effect and help you find the best way of solving any potential
problems.
Customer Service Specialists
Our Customer Service Team provides professional services of
the highest standard, concerning both commercial and technical area. They not only support all sales processes and take
full responsibility for your orders and queries but, having wide
technical knowledge about the products they sell, they become very helpful when there is a need to help you select
components or find replacements.
Research and Development Engineers
Using all their amazing brain powers, our Engineers will
make your ideas become real and effective technical solutions
by applying the newest technologies and development trends.
Production Team
Our highly qualified Production Specialists put your orders
into practice. Long years of experience and developed know
how on the production processes of complex and technically
most advanced products, make them a unique team of specialists, always eager to improve and develop their skills.
Finance and Logistics Specialists
All the professional service which is necessary to let the whole
cooperation process run smoothly for the client.
Quick, accurate and friendly people that effectively run logistic and financial processes.
Sales Structure
Since the team of experienced design engineers has always been the backbone of Radiotechnika Marketing, our
Management Board strongly believes in the development of our own production. Starting from 1996, the share of own
products and services in our sales has been systematically increasing, turning our once distribution-only company into
both a producer and distributor.
2010
2005
1996
2%
51%
29%
71%
98%
production & services
49%
distribution
Certificates
As a result of an audit conducted by the Military Institute for Quality Systems, on 19th January 2005, Radiotechnika
was awarded with the certificates that confirm conformance of our Quality Control System with the following norms:
PN-EN ISO 9001:2008 and AQAP 2110:2009.
In April 2005 Radiotechnika was
registered by the Military Centre for
Normalization and Coordination as
a NATO Commercial and Government
Entity (NCAGE Code No. 0897H).
Radiotechnika is licensed to manufacture and trade in the products
and technologies of military and police origin and destination (Certificate
No. B-058/2005).
In 2007 Radiotechnika was awarded with Qualified Product List (QPL)
certificate issued by Defence Supply
Center Columbus (DSCC) at US Department of Defence allowing us to mark
connectors from our assembly line as
JD38999 and JMS2746x.
Section for undisclosed information security
Due to the profile of Radiotechnika’s activity it is necessary to incorporate such a section in the company
structure. It is mainly determined by the fact that Radiotechnika is an approved direct supplier to the
army and to a number of military equipment producers.
The employees who closely cooperate with the military industry are holders of personal certificates of
industrial security at confidential and secret levels.
Fiber optic
technology
HYBRID CONNECTORS
We are able to design and
manufacture ruggedized
patchcords containing both
copper wires and optical
fibers terminated with electrical and optical contacts.
The number of electrical
and optical contacts (either
expanded beam or physical
contacts) in hybrid connectors may vary, depending
on user needs.
POLISHING MACHINE
A fundamental tool to manufacture fiber
optic connectors of highest and fully repeatable quality. Diamond polishing materials and precise ferrule fixtures enable to
reach the proper geometry of ceramic and
metal ferrules,, what is crucial for highest
g
quality termination
mination of single- an
and
nd multi-mode
m
nectors
rss.
optical connectors.
ELECTRIC AND OPTIC SLIP
RINGS
NGS ASSEMBLIES
Radiotechnika Marketing offers electric slip rings assemblies and fiber
optic rotary joint enabling continuous transfer of optic and electric
signals among rotating elements. We provide both miniature and
big-sized solutions transmitting from 1 to 600 electric control and supply
signals and 1 to 19 optic channels (MM/SM/POF).
Depending on type, slip rings assembly may transmit supply (1kA/1kV)
and high-frequency signals (up to over 250 MHz). Attainable rotation
speed reaches as much as 16 000 rpm. Because of ingress protection
factor IP68 (waterproof) and wide range of operating temperatures, our
slip rings may be used in all kinds of applications.
TACTICAL FIBER OPTIC CABLES
They are produced based on the
Amphenol CTOS connector technology.
They are core transmission cables for the
field installable, mobile C4I networks.
Field deployable, high durability cables
provide superior mechanical strength and
high resistance to a harsh environment.
Hermaphroditic CTOS connectors enable daisy-chain connections without installing any additional adapters at the
beginning or end of the jumper.
We are able to produce tactical jumpers
with other connectors (expanded beam
or butt-joint), drums and cables.
MEDIA CONVERTERS
We design and manufacture
special versions of media converters which allow transmission
of various types of electrical
signal via fiber optic links and
at the end of the links reconvert it back into the electrical
signal (digital or analogue).
S
TOOLS
CTOS EXPANDED BEAM CONNECTORS
We assembly CTOS connectors,
approved by the Polish Army as
a standard for tactical fiber optic
connector, for its perfect mechanical interface and easy service.
The lenses used within these connectors, expand the light beam,
which makes the entire solution
more resistant to the mechanical
filth and the stainless steel shell
delivers extraordinary robustness
and durability.
METROLOGY
Our test equipment is always calibrated at the certified laboratories.
It is to guarantee and secure an appropriate quality of our products.
During the production process we
use only verified materials, and we
do final quality control for 100% of
out coming products.
We have technologies of other major expanded beam connectors at our disposal, including
single mode solutions.
PHYSICAL CONTACT CONNECTORS
We manufacture optical patchcords using
physical contact connectors. They are
simpler and more cost effective solutions
They require more attention during
the maintenance process but they are
characterized by lower insertion loss
and better return loss in comparison
to the expanded beam connectors.
INTERFEROMETER
Maximum number of contacts for the butt
joint connectors can be significantly higher
when compared to the expanded beam
solutions (up to 37 channels and more).
A key tool to verify and setup polishing process of optical ferrules. Optical method of measurement both with
the white and monochromatic light
enables to examine the geometry of
ferrule with the nanometre accuracy.
FIBER OPTIC PATCH CORDS
SERVICE AND MAINTENANCE
Our customer can be sure of
our help and support if they
need it.
We dispose of the technology to
rebuild optical continuity, mechanical strength and environmental resistance of the damaged
and broken fiber optic jumpers.
We do deliver all necessary repair and maintenance kits and
materials.
We conduct necessary trainings for all customers that require to repair tactical cables by themselves.
Connectors
and cable harness
DESIGN ENGINEERING
HARNESS SHOP
The processes of designing,
making and installation of harnesses are usually the last
steps in production of avionic,
floating or land vehicle mobile
platforms. Making use of their
know-how and many years of
experience, our specialists take
part in the process of measurements and design from an early
prototype stage. Our team will
accompany and support you
throughout the whole way from
the very birth of the idea to the
final product, choosing matching technology and selecting
the finest practical solutions.
Since 1995 we have designed and produced electric harnesses,
based on the technology developed by the industry‘s international leader TE Connectivity (Tyco Raychem) whose authorized
representatives we are. Radiotechnika Marketing is the only
company in Poland in possession of TE Connectivity’s Codes of
Practice (CoPs) thus ensuring the ultimate compliance of our
harnesses with technological requirements and customers’
specifications, and the technological requirements. Making use
of their broad knowledge gained through long years of market
presence our engineers take part in many wiring systems
projects for military, rail, cosmonautics, air, maritime and automotive industries.
Our participation in customers’ projects lasts from very early
stages of works on the new concept through the selection of
technologies, components and suppliers, making measurements and tests on created or modernized platforms to the
design, creation and installment of the wiring systems.
DESIGN
Using dedicated Harn-Ware
software and other CAD
applications help us optimize
the electric and mechanical
aspects of cable harnesses
production thus enabling
RM to create value-added
products. This software
makes the design process
up to 90% faster and the
libraries attached comprise
over 60b000 elements and
are constantly enriched
with new solutions. The
documentation created this way contains assembly drawing, diagram, table of connections, manuals
and estimated time of assembly.
PROTOTYPE
While taking part in the process of harness system design
we gain a complete know-how
needed to build prototype wiring used to verify the construction. This is the moment to
check functionality and harness' leading, and make sure
that the solution we applied is
the most suitable. After implementing adjustments (if any)
the trial production may begin.
PRODUCTION
DEPARTMENTS
MILITARY CONNECTORS D38999,
series I and III
Miniature connectors with a very
high screening efficiency. Scoopproof system eliminates the risk
of shorting or breaking the contacts, even in extremely severe
conditions.
MILITARY CONNECTORS
DEPARTMENT
Radiotechnika is value-added assembling manufacturer of military connectors licensed by Amphenol and QPL agency. We provide immediate delivery
of both single items and whole series with no limit as to quantity. Connectors
produced by Radiotechnika are a great example of the use of Polish national
products within the military industry.
Mil-C-38999 series III connectors have been additionally furnished with self-locking system
against vibrations. The quality of
our production has been confirmed by QPL (Qualified Product
List) Certificate granted by Defense Logistics Agency.
The Military Connectors Department is equipped with over 100 specialized
tools such as presses, torque wrenches, measurement needles and marking
printers. Over 350 different kinds of components are kept in stock for our
current ongoing production. Our annual production capacity is 60 000 pieces.
MILITARY CONNECTORS VG95234
Cylindrical connectors with
fast locking system (reversed
bayonet coupling), allowing to
arrange many high-current
contacts (up to 250A per
connector). We are offering
wide range of adapters for
different types of wiring, integrated with receptacles
and plugs.
New military
connectors series
coming soon!
MASS-PRODUCTION
Our Harness Production
Department has been fully
equipped to produce elements of wiring systems for
both small and large production series. We possess the
tools and machines enabling
us to cut and strip wires, to
mark wires and cables as well
as manual and machine contacts crimp tool, tools for
operating heat shrink sleeves
and testers for either regular
or DataBus harnesses.
TESTING
The critical stage of any
harness production process is the final testing,
when the correctness of its
performance is thoroughly
checked. The testers made
by highly recognizable producers used in our department enable us to apply
the four-point method of
checking continuity, insulation resistance, dielectric
strength and the passive elements. Each and every piece of harness produced by RM
undergoes the testing process and its unique serial number must correspond with
tests and measurements results which may be attached to your delivery.
Power supply
and control systems
POWER SUPPLY SYSTEMS
Our team of experienced specialists
may provide complete power supply
systems tailored to your needs and
specifications. A perfectly matched
system architecture will ensure optimal power supply for all receivers installed in the vehicle. Every single element of our power supply system is
designed to function in most severe
and demanding environment, at both
high altitude or extreme temperature.
CONTROL SYSTEMS
Set of systems designated
to switch, oversee and filter
electrical signals controlling
functional modules and control circuits in special application vehicles.
Depending on low-voltage
signals provided by control
units (board computers),
these systems ensure the
steering of executive facilities of military vehicle such
as gear box (VJB) or turret
of the tank or cannon (TIB).
CBRN AND AC SYSTEMS
We produce two-way NBC systems for
vehicles operated in the areas exposed to
CBRN contamination. The device shall automatically switch the incoming stream
of air and direct it into filter at the very
moment any contamination is detected.
We are also offering AC systems, including
condensers integrated with the engine
cooling system, which provide optimal
working conditions for crew, electronic devices of the vehicle and the engine.
Highly profiled air conditioning systems
guarantee ultimate operating conditions
for COTS class electronic devices.
DEVELOPMENT,
ADVISORY AND TRAINING
RESEARCH AND DEVELOPMENT
Our Research & Development Department consists of exceptionally
ed
educated and experienced electronic and mechanical engineers,
having constant access to highly developed research resources
ha
and equipment. They are eager to transform new technologies,
an
trends and ideas into technical solutions ready to be implemented
tr
into
in production processes at either RM or your plant. We take
pride
pr in being recognized as specialists in designing the most reliable and technically advanced devices which may be operated in exbl
treme environmental conditions. This is the place where all our
tr
products are born and developed.
pr
R&D department has been continuously working to make our company ready to meet the requirements of dynamically changing market
and to offer our customers constant access to state-of-the-art
technologies and practical solutions.
We are currently exploring the following areas:
• vehicle highvoltage power supply systems,
• fibre optics data transmission systems,
• devices designated to provide Electromagnetic Compatibility of
hybrid harnesses.
Radiotechnika Marketing specializes in many areas of electronics
thus being able to provide those of our Customers, who would like
to implement our solutions, with professional advice, consult or
organize suitable training.
EMC FILTERS
Our knowledge together with the use of specialized measurement equipment let us identify the source of electromagnetic interferences and eliminate them.
The most common method used for lowering the level of noises
is improving the shielding, designing fitting filter and installing it
inside or outside of devices.
Our specialists are able to solve every problem regarding electromagnetic interferences and as a result bring the whole system to full compatibility with MIL-STD-461.
EMC
laboratory
EMC LABORATORY
Our laboratory carries out commissioned
measurements and prepares custom-designed
testing programs to fit our customers’ needs.
The aim of such programs is to establish
whether the tested appliances or systems
comply with valid applicable standards and
norms. We perform tests for compliance with
military and civil standards.
EMC CHAMBER
Our laboratory is equipped with the top class anechoic chamber
Rainford (size 6bxb9bxb5,5bm/20bxb30bx 18 ft) and measurement
distance 3 m. It enables us to measure radiated emission and
immunity against electromagnetic field. Unique, double shielded
construction of chamber secures against influence of outside
electromagnetic fields with frequencies over 40 GHz. The chamber is equipped with system to take away exhaust gases.
Pneumatically latched doors of chamber (2 x 2,5 m) enable tests
of big-sized devices, with mass up to 500 kg.
Project co-financed by European Union
from the European Regional Development
Fund (ERDF) and National Funds
under the Regional Operational Program
for Lower Silesia in 2007-2013
ON SITE TESTS
We provide on site EMC tests for stationary and mobile objects that are either too difficult or
impossible to transport such as military vehicles or whole systems. We are able to carry out the
tests on our customers premises or on the carefully selected and suitable site.
Electromagnetic compatibility
(EMC) and environmental
testing laboratory
MODIFICATION OF DEVICES
M
MEASURING
APPARATUS
A
The EMC chamber is supTh
plemented by wide range
ple
of m
measurement equipment,
provided by leaders in this
pro
field.
fiel
Our customers can rely on our specialist help when the results of the tests exceed the required standards. Furthermore, based on outstanding knowledge of
our specialists, highly experienced in implementing practical solutions of several
EMC problems, we are offering our customers a possibility to adjust their products
to the requirements of EMC norms and standards. Cooperating closely with the
customer’s R&D Department, our engineers deliver solutions ensuring that the
final product fully complies with the requirements of EMC standards. The customers can thus save their time and resources which would otherwise have to be involved in a costly redesigning process. We can prepare and implement updates
and improvements in order to meet both, the military and civil requirements.
CLIMATIC
TEST CHAMBER
Climatic test chamber with capacity of 1700 liters and temperature
range of -70 to +180b°C and humidity of up to 95% enables simulation of different types of climate.
SHOCK AND VIBRATION
BRATION
TESTING SYSTEM
TRAININGS AND CONSULTANCY
Shock and vibration machine with special controller
enables performing sophisticated mechanical tests.
Maximum static load: 600 kg.
EMI FILTERS
We produce EMI/EMC filters utilized in military vehicles, engine-generators, computer systems
and other equipment operating in
extreme environmental conditions (vibration, high or low temperature, high humidity)
We do provide technical support in subject of EMI/EMC and
organize trainings designed especially for our customers.
Distribution
Radiotechnika Marketing started its activity as a distributor
of electronic components and measurement appliances such as
oscilloscopes and gas analyzers.
With the company development the range of products of our
official cooperators was extending and thus we became a representative and a distributor of these companies and their products.
The motto of Radiotechnika Marketing is to offer devices and
components of the highest quality. The range of products has
been chosen from many corresponding and complementing
areas to fully satisfy our customers’ needs and requirements. All
foreign companies that we cooperate with are the leaders in
their field and are ISO certified.
1000 m
2
of warehouse,
3000
50 brands
part numbers in stock,
represented
FIBER OPTIC TECHNOLOGIES
AMPHENOL
GLENAIR
TE CONNECTIVITY
OCC
MICROSENS
PANDECT
CONNECTORS FOR TYPICAL AND EXTREME WORK CONDITIONS
FIBER OPTIC AND HYBRID CABLES
MEDIA CONVERTERS
ELECTRIC SLIP RINGS ASSEMBLIES AND FIBER OPTIC ROTARY JOINTS
INDUSTRIAL AND MILITARY ELECTRONIC COMPONENTS
(SUBASSEMBLIES)
ESTERLINE/LEACH
RECOM
TE CONNECTIVITY
MPE
AMETEK
RELAYS, CONTACTORS
CONVERTERS DC/DC, AC/DC, DC/AC
POLYSWITCH PROTECTION DEVICES
FILTERS, FEEDTHRU CAPACITORS
FANS FOR MILITARY APPLICATIONS
HARNESS COMPONENTS
AMPHENOL
GLENAIR
TE CONNECTIVITY
POLAMCO
HELLERMAN
SSO
HONEYWELL
FEDERAL MOGUL
BACKSHELLS
WIRES, CABLES, SHRINK TUBES AND BOOTHS
BRAIDED SCREENS
HEAT SHRINK SLEEVES AND PROFILES
LABELS AND SLEEVES FOR CABLE MARKING
LIMIT SWITCHES AND SENSORS
PRODUCTS FOR CABLE DUCTING
COMPONENTS FOR SHAPING AND LEADING HARNESSES
STANDARD, HIGH-CURRENT AND GROUND TERMINALS
PANDUIT
INDUSTRIAL CABLE RACEWAYS
CIRCUIT BREAKERS AND GATE VALVES LOCKOUT DEVICES
LABELS AND STAMPS FOR CABLE MARKING
CONNECTORS
INDUSTRIAL CONNECTORS
MILITARY CONNECTORS:
AMPHENOL
GLENAIR
POLAMCO
• D38999 series I, II, III
• VG 95234, VG 95238, MIL-C-26842
• Other military connectors
• Tool for assembling connectors
COAXIAL CONNECTORS
COMPUTER NETWORKS
PHYSICAL INFRASTRUCTURE MANAGEMENT
PANDUIT
COPPER SYSTEMS
FIBER OPTIC SYSTEMS
CABLE RACEWAYS
MICROSENS
ETHERNET FOR INDUSTRIAL APPLY
MEASUREMENT SYSTEMS
TTI, SEFRAM
TEST AND MEASUREMENT EQUIPMENT
Radiotechnika Marketing sp. z o.o. PL 55-080 Kąty Wrocławskie, ul. Fabryczna 20, Pietrzykowice, Poland
tel. +48/ 71/ 327 07 00, fax +48/ 71/ 327 08 00
e-mail: office@radiotechnika.com.pl, www.radiotechnika.com.pl
BRANCHES: 01-460 Warszawa, ul. Rzędzińska 3, tel./fax +48/ 22/ 631 07 00, tel. +48/ 22/ 631 07 26
80-229 Gdańsk, ul. Jaśkowa Dolina 15, tel./fax +48/ 58/ 342 69 72
40-085 Katowice, ul. A. Mickiewicza 29, tel./fax +48/ 32/ 209 08 55
90-254 Łódź, ul. G. Piramowicza 11/13, tel./fax +48/ 42/ 630 80 59