BAUDTEC TW263R4 ADSL2+ MODEM

BAUDTEC TW263R4 ADSL2+ MODEM
ROUTER
System Requirements
1. Pentium 200 MHZ processor or above
2. Windows 98SE, Windows Me, Windows 2000, Windows XP and
Windows Vista.
3. 64 MB of RAM or above
4. 25 MB free disk space
Package Content
For Annex-B TW263R4-B2
ADSL2+ Router
For Annex-A TW263R4-A2
ADSL2+ Router
1. ADSL2+ Wireless Router
2. CD-ROM (Software & Manual)
3. Quick Installation Guide
4. 2 x Telephone Cables (RJ-11)
5. Ethernet Cable (RJ-45)
6. AC Adaptor
7. Annex B Splitter (ATF057)
1. ADSL2+ Wireless Router
2. CD-ROM (Software & Manual)
3. Quick Installation Guide
4. 2 x Telephone Cables (RJ-11)
5. Ethernet Cable (RJ-45)
6. AC Adaptor
7. 2 x Annex A Splitter (ATF085A1R)
Installation & Setup
Follow each STEP carefully and only go to the next step once you have
completed the previous STEP.
The Ethernet port no# 4 is ONLY FOR IPTV and cannot be utilized as
normal Ethernet port.
1
STEP 1
Connection of ADSL2+ Modem Router
If you have an ISDN telephone line connect the modem router as shown
below:
1.
2.
Connect one end of the RJ-45 Ethernet Cable to your PC’s Ethernet port
and the other end to one of the 3 “LAN” ports of the Wireless ADSL
MODEM ROUTER. . ATTENTION: The LAN port no 4 (purple marking)
can only be used for Set-Top-Box (STB) connection.
Connect the supplied RJ11 telephone cable from your home's telephone
jack to the "LINE " port of the supplied ATF057 splitter. Connect another
RJ11 telephone cable to the "MODEM" port of the splitter and connect the
other end of this cable to the " LINE " port of your WLAN ADSL2+ Router.
3.
Connect a RJ11 telephone cable to the "PHONE" port of the splitter and
connect the other end to the input which is underneath the NETMOD/NT1
OTE unit.
4.
Connect the power adapter to the power inlet "POWER" of the ADSL2+
WiFi Router and turn the "ON/OFF SWITCH" to switch of your ADSL2+
WiFi Router on and wait for 2 minutes before moving to the next step.
2
If you have a PSTN telephone line (normal analog line) connect the router
as shown below:
1.
2.
3.
4.
3
Connect one end of the RJ-45 Ethernet Cable to your PC’s Ethernet port
and the other end to one of the 3 “LAN “ports of the Wireless ADSL
MODEM ROUTER. ATTENTION:The LAN port no 4 (purple marking)
can only be used for Set-Top-Box (STB) connection.
Connect the supplied RJ11 telephone cable from your home's telephone
jack to the "LINE " port of the supplied ATF085A splitter. Connect the other
supplied RJ11 telephone cable to the " DSL " port of the splitter and
connect the other end of this cable to the " LINE " port of your WLAN
ADSL2+ Router.
Connect a RJ11 telephone cable to the " PHONE " port of the splitter and
connect the other end to your telephone. In case there are more than one
telephone devices in other telephone sockets inside the house, you have to
place a splitter to each one of them as well.
Connect the power adapter to the power inlet " POWER " of the ADSL2+
WiFi Router and turn the " ON/OFF SWITCH " to switch of your ADSL2+
WiFi Router on and wait for 2 minutes before moving to the next step.
LED Meaning
Your WLAN ADSL2+ Router has indicator lights on the front side.
Please see below for an explanation of the function of each indicator light.
: Power indicator
: ADSL Link indicator
: ADSL Active indicator
: Wireless Active indicator
: Ethernet Active indicator
Table 1.1: LED function
Label
Color
On
Flash
Off
Green
Ready
Not Ready
Power Off
Green
N/A
ADSL Active
ADSL IDLE
Green
Connect to
DSLAM
Disconnect to
DSLAM
N/A
Green
N/A
Wireless Active
N/A
Green
Ethernet
Connected
Transmit /
Receive Data
Ethernet
Disconnected
4
STEP 2
Configuration Procedures
Before starting the WLAN ADSL2+ Router configuration, please kindly
configure the PC computer as below, to have automatic IP address /
DNS Server.
For Windows 98SE / ME / 2000 / XP
1. Click on " Start " -> " Control Panel " (in Classic View).In the Control
Panel, double click on " Network Connections " to continue.
2. Single right click on " Local Area connection ", then click
" Properties ".
5
3. Double click on " Internet Protocol (TCP/IP) ".
4. Check " Obtain an IP address automatically " and " Obtain DNS
server address automatically " then click on " OK " to continue.
5. Click " Show icon in notification area when connected " (see screen
image in 3. above) then Click on " OK " to complete the setup
procedures.
6
For Windows Vista-32/64
1. Click on " Start " -> " Control Panel " (in Classic View) -> " Network
and Sharing Center ". In the Manage network connections, double click
on " Manage network connections " to continue.
2. Single right click on " Local Area connection ", then click
" Properties ".
7
3. The screen will display the information " User Account Control " and
click " Continue " to continue.
4. Double click on " Internet Protocol Version 4(TCP/IPv4) ".
5. Check " Obtain an IP address automatically " and " Obtain DNS
server address automatically " then click on " OK " to continue.
6.You can see the screen will appear as shown in step 4. above, then click
on " OK " to complete the setup procedures.
8
STEP 3
WLAN ADSL2+ Router Configuration
1. Please insert the supplied CD into your CD-ROM drive.
2. The CD should auto-start, displaying the window shown in 3. below. If
your CD does not start automatically go to Windows Explorer, Select your
CD drive and double click " setup.exe ".
3. Please choose your language (Greek or English) and then click button to
continue.
4. Please click " Ethernet connection " button to continue.
9
5. Please fill in the User name and Password fields with those ones which
have been provided to you during the purchase of the conn-x package and
press "Save configuration". Please wait for 2-3 minutes.
NOTE: The User name must be followed by @otenet,gr
(username@otenet.gr).
STEP 4
Connect Wirelessly
For easy installation it is advised to keep the default settings. You can later
change the wireless settings via the wireless configuration menu. (see user
manual on the CD – Chapter 9 and other) or, if you want to change the
network key now and/or to change the password on device’s login
webpage, please go to below step 5.
In case the below settings do not appear on your computer, please check
your Wireless USB Stick or your Wireless Network Card User Manuals
which are included in their packaging.
1. Double click on the wireless icon on your computer and search for the
wireless network named OTE CONNX
10
2. Click on the wireless network named OTE CONNX to connect
3. Enter the network key that belongs to your wireless network. (the default
key is 1234567890123) You can later change this network key via the
wireless configuration menu. (see user manual on the CD – Chapter 9
and other) or, if you want to change the network key now and/or to
change the password on device’s login webpage, please go below to
chapter 5.
11
4. Click on Connect or Apply
5. If you want to change the network key, and /or to change the password on
device’s login webpage, launch your web browser (Internet Explorer 6.0
and above, or Netscape Navigator 7.0 and above), and type
http://192.168.1.1
6. Please enter user name (" admin " is the default), password (" 1234 " is
the default) and click " OK ".
12
7. Go to Interface Setup → Wireless to change the default key of the
Wireless Lan Network. Delete all characters from field " Key#1 " and
type 13 characters of your desire for your new key (you can type either
letters or numbers, symbols are excluded) and then press SAVE (write
the password on a piece of paper in case you forget it). For further details
on Wireless Lan settings or on the different security modes, such as:
“WEP-64Bits” / “WEP-128Bits” / “WPA-PSK” / “WPA2-PSK”, please refer
to the User Manual on the CD – Chapter 9 and other.
13
8. To change the password on device’s login webpage, go to Maintenance
-> Administration as below figure, then enter the new password to
below figure twice, and SAVE it. (write the password on a piece of paper
in case you forget it).The default is admin (Username) and 1234
(Password)
9. Change User name and Password
A. In case you want to change the User name and Password (the User
name can be changed only once, while the Password can be
changed as many times as you wish), open the Internet Explorer and
type: http://www.oteshop.gr/myservices/myid.
B. Please follow the instructions as these are shown on the page you
have opened.
14
Important notice – Safety
Risk of fire or electric shock!
z Ensure that air can circulate freely through the ventilation holes on
this unit. Allow at least 5~10 cm clearance around the unit.
z Never expose this unit to direct sunlight, naked flames or heat.
z Never place this unit on other electrical equipment.
z Keep away from this unit during lightning storms.
z Never remove the casing of this unit. Please leave all maintenance
work to qualified personnel.
z Keep this unit away from water, moisture and liquid filled objects.
Recycle Notice
Your product is designed and manufactured with high quality material
and components which can be recycled and reused. When this
crossed-out wheeled bin symbol is attached to a product, it means the
product is covered by the European Directive 2002/95/EC. Please
inform yourself about the local separate collection system for electrical
and electronic products or contact the supplier of this product for further
information on their environmental performances. Please act according
to your local regulations and do not dispose your old products with your
normal household waste. The correct disposal of your old product will
help to prevent potential negative consequences for the environment
and human health.
This product complies with the radio interference requirements of the
European Community. This product complies with the requirements of
the following directives and guidelines: EN60950-1, R&TTE 99 / 5 / EC.
The product comes with 12 months warranty period which begins
15
from the date of purchase.
16