jafco insulated digging tools insulated digging tools

Transcription

JAFCO
JAFCO
JAFCO
INSULATED DIGGING TOOLS
SAFE HAND DIGGING TOOLS
1
© ma-design.com
JAFCO
Jafco Tools Limited
Access House
Great Western Street
Wednesbury
West Midlands
WS10 7LE
UK
JAFCO
Tel: +44 (0) 121 556 7700
Fax: +44 (0) 121 556 7788
email: sales@jafcotools.com
featuring
NUPLAGLAS®
www.jafcotools.com
FIBREGLASS HANDLES
PRODUCT GUIDE - SEPTEMBER 2012
JAFCO INSULATED TOOLS...................................................................................... 2
NUPLAGLAS FIBREGLASS HANDLES.................................................................... 2
HSE GUIDANCE ON USE OF INSULATED DIGGING TOOLS ................................. 3
ELECTRICAL TESTING OF JAFCO INSULATED TOOLS ........................................ 3
INSULATED STANDARD LENGTH FORKS, SHOVELS & SPADES ..................... 4-7
INSULATED POWER PYLON SHOVELS & SPADES ............................................ 8-9
INSULATED LONG-HANDLED SPADES............................................................ 10-11
INSULATED CROWBARS & DIGGING BARS.................................................... 12-13
INSULATED CONTRACTORS’ TOOLS .............................................................. 14-20
SHOVELHOLER ................................................................................................... 14
POST HOLE DIGGER ........................................................................................... 15
BREAKING HAMMER ............................................................................................ 16
SOIL PROBE....................................................................................................... 16
PUNNERS & TAMPERS ........................................................................................ 17
PICK HANDLES ................................................................................................... 18
PICK HEADS....................................................................................................... 18
INSULATED HAMMERS ..................................................................................... 19-20
CLAW ............................................................................................................... 19
BALL PEIN ........................................................................................................ 20
CLUB ................................................................................................................ 20
SLEDGE ............................................................................................................ 20
JAFCO TOOLS LTD
2
Access House
Wednesbury
West Midlands
WS10 7LE
U.K.
HANDLES
Tel : +44 (0) 121-556 7700
Fax : +44 (0) 121-556 7788
3
JAFCO
JAFCO INSULATED TOOLS
JAFCO TOOLS is a well established manufacturer of quality hand tools, mainly featuring the many significant
advantages of NUPLA pultruded fibreglass (NUPLAGLAS) handles. In particular NUPLAGLAS provides excellent
electrical insulation. For over 20 years JAFCO has produced hand tools for safety-critical and onerous tasks.
Major established users include Transco, British Telecom, Water, Electricity and Railway Companies, and
Fire & Rescue Services. JAFCO is the major supplier of insulated railway track maintenance hand tools for
working under live rail conditions.
The JAFCO INSULATED TOOLS in this brochure are insulated for operations where electric cables may be
present, and are relevant to all companies engaged in groundworks associated with utilities, street lighting,
highway works, fencing etc.
Tools meet or exceed relevant British Standards (e.g. for hammers, picks, shovels). J AFCO uses heads
manufactured and tested to relevant British Standards. In addition, every J AFCO INSULATED TOOL is
individually electrically tested.
JAFCO INSULATED DIGGING TOOLS feature NUPLAGLAS shafts, specifically formulated to meet hand tool
requirements. NUPLAGLAS exceeds the requirements of the several British Standards for fibreglass used in
hand tools. Fibres are electrical grade, tensioned, continuous and parallel, with over 70% fibre by mass.
The electrical insulation performance of NUPLAGLAS is extremely high and well in excess of likely
requirements.
JAFCO
JAFCO
HSE GUIDANCE ON USE OF INSULATED DIGGING
TOOLS
x
x
“Buried services are widespread and it should be assumed that
they are present unless it has been shown otherwise”…… ( para 2 )
FIRE
AND RESCUE TOOLS
“Trial holes (to be) dug using suitable hand tools...to confirm the
position of any buried services”
……………...………………….. ( para 69 )
featuring
x
“Insulated tools should be used when hand digging near electric
®
NUPLAGLAS
FIBREGLASS HANDLES
cables”
…………………………………………….…………………….….
( para 71 )
Product Guide - May 2009
Extracts from HSG47 “Avoiding Danger From Underground Services” 2005.
OF CONTENTS
Please refer to HSE publication HSG47 for TABLE
full guidance
JAFCO TOOLS LTD.........................................................................................................................................................2
NUPLAGLAS® FIBREGLASS HANDLES.......................................................................................................................3
JAFCO FIRE & RESCUE TOOLS...................................................................................................................................4
JAFCO TOOLS is registered to ISO 9001 : 2008.
NEW FOR 2009.............................................................................................................................................................5
FIRE & RESCUE LONG HANDLED TOOLS : FIXED HANDLES ........................................................................ 6 - 10
Ceiling Hooks.......................................................................................................................................................6
NUPLAGLAS
ELECTRICAL
TESTING
ofGrabJAFCO
INSULATED TOOLS
Wall / Ceiling Hook,
Rubbish Hook, Rescue
Hook...................................................................................7
FIBREGLASS HANDLES
Pitch Fork, Hay Fork, Manure Drag...................................................................................................................8
Strong : Safe : Durable
is widely recognised as the safest, strongest, most durable and cost-effective material available
for tool handles. Designed specifically for hand tools, the high specification of NUPLAGLAS provides the
many beneficial qualities for hand tools, including :
NUPLAGLAS
x
Excellent electrical insulation
x
Highly resistant to damage through wear and overstrike
x
Securely fixed to tool heads - majority of tools feature bonded assembly
x
Comfortable to use - low sting and vibration, warm to the touch
x
Unaffected by storage and weather conditions, immersion in water, etc.
x
Highly resistant to most industrial oils, greases and chemicals
ENTRY TOOLS ..................................................................................................................................................... 15 - 18
Hatchets & Axes ........................................................................................................................................ 15 - 16
It is the responsibility
of the customer and/or user to decide if the requirements and
Sledge Hammers & Wrecking Hammer.............................................................................................................17
electrical tests
in BS8020:2011 meet the requirements of the specific circumstances of
Pick Axe Handles & Bolt Cutters .......................................................................................................................18
use.
FIRE & RESCUE ‘FIRST AID ENTRY KIT’ ...................................................................................................................19
SHOVELS & SPADES...................................................................................................................................................20
UnderSMALL
BS8020:2011
each tool must be individually tested to 10,000V a.c. and marked for full
HAMMERS .......................................................................................................................................................21
traceability. For full details please refer to the British Standard BS8020:2011.
All NUPLAGLAS handles exceed the performance requirements for fibreglass handles in relevant British
Standards. The NUPLA CORPORATION of Los Angeles, U.S.A. have continued to be leading innovators and
manufacturers of fibreglass tool handles for over 50 years. The NUPLA range of specifications is unique.
NUPLAGLAS
2 4
Fire Beaters.............................................................................................................................9
At present Forester’s
there isRake,
no British
Standard or Code of Practice for electrical testing of insulated
ground excavation
Many ground excavation tools are similar to tools used on the
Water Depthtools.
Pole ..............................................................................................................................................10
railways,
thereTAKE-APART
is a BritishSYSTEM
Standard
for railway track tools used on/near live conductor
FIREand
& RESCUE
.........................................................................................................
11 - 14
rails. Therefore
J
AFCO
electrically
tests
the
insulated
tools
in
this
brochure
to the
Grip Ends, Extensions .......................................................................................................................................11
requirements
ofEnds
that.................................................................................................................................................
Standard : BS8020:2011 Insulating Railway Track Tools for working
Head
12 - 13 on/
near live conductor
rails
operating
to
voltages
up
to
1,000V
a.c
.or
1,500V
d.c.
.
Brooms & Squeegee Heads ..............................................................................................................................14
is a registered trademark of the NUPLA CORPORATION of Los Angeles, U.S.A.
2011/09
Every
JAFCOTOOLS
tool classed
as insulated is electrically tested in accordance with BS8020:2011
JAFCO
LTD
and
has orange
Access
House handles. The electrical testing is carried out by JAFCO, in-house.
Wednesbury
West Midlands
WS10 7LE
UK
2011/09
Tel : +44 (0) 121-556 7700
Fax : +44 (0) 121-556 7788
53
JAFCO
JAFCO
STANDARD LENGTH FORKS, SHOVELS and SPADES
INSULATION OF STANDARD LENGTH FORKS, SHOVELS
and SPADES
ALL JAFCO INSULATED STANDARD LENGTH SHOVELS, FORKS, SPADES, DRAINERS, conforming to
BS3388 are fully insulated, including full insulation of the metal socket. The socket insulation
consists of a specially designed and profiled, double-sleeved insulated guard system, bonded
over the metal sockets (see below). The solid NUPLAGLAS fibreglass shafts are epoxy bonded to
the sockets, and the overguard and the NUPLAGLAS shafts are coloured orange. These tools also
fully conform to BS8020:2011, and are individually electrically tested in-house by JAFCO.
In addition, the JAFCO POWER PYLON RANGE of STANDARD LENGTH SHOVELS and SPADES is fully
insulated; please see pages 8 & 9 for further information on the Power Pylon concept.
INSULATION OF METAL SOCKETS
In JAFCO’s range of INSULATED STANDARD LENGTH
every use in ground excavations and works :
FORKS SHOVELS AND SPADES
there is a tool for
CONTRACTOR’S FORK
for penetrating and breaking-up hardcore,
and TAPER MOUTH SHOVELS for moving and working aggregates and backfilling,
ROUND MOUTH SHOVEL
for ground works in earth and loose materials,
DRAINER,
}
GRAFTER,
}
for digging narrow holes and trenches,
CABLE LAYER,
}
RABBITING SPADE
}
GENERAL SERVICE SHOVEL (preferred in Scotland)
for general digging and shovelling tasks.
SQUARE
Full list on pages 6-7.
THE JAFCO INSULATED STANDARD LENGTH SHOVELS, FORKS and SPADES (pages 5-7) are
manufactured to the same design configuration and specification as supplied by JAFCO for
Insulated Rail Track tools. These tools feature a specially designed and profiled, doublesleeved, double-insulated overguard system, bonded over the metal sockets.
The overguard, made from rigid abrasion-resistant fibreglass-reinforced nylon, is coloured
ORANGE and epoxy bonded to an underguard, also of fibreglass-reinforced nylon, which is
coloured WHITE and epoxy bonded to the metal socket. This double overguard system of
contrasting colours, as well as being securely fixed and insulating the metal socket, is a safety
warning indicator which ensures the socket remains safely insulated from the user, even when
the warning WHITE underguard becomes visible, however SHOULD BE INSPECTED BOTH BEFORE AND REGULARLY DURING USE, AND IF
AT ANY TIME THE WHITE UNDERGUARD BECOMES VISIBLE, USE OF THE TOOL SHOULD
CEASE IMMEDIATELY AND THE TOOL REPLACED.
All tools fully conform to BS3388 and BS8020:2011 - shape, dimensions and performance, and
are electrically insulated with orange solid NUPLAGLAS fibreglass shafts, and the metal sockets
insulated with an abrasion resistant double-sleeve system. Every tool is tested in-house to
10,000V. and marked for traceability.
All standard length digging tools have the high strength NUPLA plastic PYD grip bonded to the
shaft. Treaded blades are available where improved grip by, and reduced wear, on insulated
boots is a priority.
TOOLS
For INSULATED LONG HANDLED SPADES see page 10-11.
white underguard sleeve
NUPLAGLAS
shaft
metal socket
For railway applications, please see the JAFCO RAILWAY TRACK TOOLS brochure, which includes
specialised track tools such as insulated ballast forks, and gives NETWORK RAIL Catalogue
Numbers and LONDON UNDERGROUND Part Numbers.
orange overguard sleeve
(diagram not to scale)
4 6
2011/09
2011/09
75
JAFCO
JAFCO
EXCAVATING NEAR ELECTRIC CABLES?
INSTALLING STREET LIGHTING?
Equip your workforce for safe hand digging,
specify JAFCO INSULATED DIGGING TOOLS.
Used by local authorities, major street lighting, electrical, utilities and railway contractors.
CONTRACTOR’S
TREADED SPADE
SQUARE MOUTH
SHOVEL
TAPER MOUTH
SHOVEL
ROUND MOUTH
SHOVEL
GENERAL SERVICE
SHOVEL
Hard wearing, heavy duty tools providing excellent electrical insulation :
– Non-conductive Nupla fibreglass shafts, used by utilities and railways
for over 15 years.
– Every tool electrically tested to 10,000 volts, in-house, and marked for traceability.
p
– All tool handles are orange, marked p 1000V.
Tools meet and exceed relevant British Standards.
INSULATED STANDARD LENGTH
SHOVELS, SPADES & FORKS
NARROW TRENCH
SHOVEL
PART No.
CABLE LAYER
NEWCASTLE
DRAINER
blade length
(13”)
blade width
710mm
(28”)
330mm
200mm
(8”)
710mm
(28”)
290mm (11.5”)
190mm (7.5”)
710mm
(28”)
320mm (12.5”)
255mm (10”)
710mm
(28”)
320mm (12.5”)
255mm (10”)
plastic YD grip
INSULATED TREADED SPADE
SP75IT/O/P
RABBITING
SPADE
GRAFTER
shaft to blade
shoulder, nominal
DESCRIPTION
INSULATED CONTRACTOR’S FORK
CF17IT/O/P
Double-insulation over metal sockets :
– Wear-resistant, fibreglass-reinforced nylon orange overguard.
– White fibreglass warning underguard.
– Fully bonded to metal socket.
plastic YD grip
INSULATED SHOVEL, SQUARE MOUTH NO. 2
SV22IT/O/P
plastic YD grip
SV22IT/O/PTR
plastic YD grip ;
treaded
INSULATED SHOVEL, TAPER MOUTH
SV00IT/O/P
plastic YD grip
SV00IT/O/PTR
plastic YD grip ;
treaded
Available in 10 patterns.
Left to Right: Taper Mouth, Spade, Square Mouth, Contractors’ Fork, Rabbiting Spade, Round Mouth, Newcastle Drainer, Narrow Trench, Cable Layer, Grafter
6 8
2011/09
9
JAFCO
shaft to blade
shoulder, nominal
DESCRIPTION
INSULATED SHOVEL, ROUND MOUTH
SV01IT/O/P
plastic YD grip
SV01IT/O/PTR
plastic YD grip ;
plastic YD grip
SV26IT/O/PTR
plastic YD grip ;
plastic YD grip
SV07IT/O/PTR
plastic YD grip ;
plastic YD grip
SV53IT/O/PTR
plastic YD grip ;
plastic YD grip
SV31IT/O/PTR
plastic YD grip ;
plastic YD grip
SP44IT/O/PTR
plastic YD grip ;
10
2011/09
plastic YD grip ;
710mm
(28”)
280mm
(11”)
190mm (7.5”)
710mm
(28”)
280mm
(11”)
140mm (5.5”)
710mm
(28”)
405mm
(16”)
178mm (7”)
ROUND MOUTH
SQUARE MOUTH
(28”)
320mm
(12.5”)
165mm (6.5”)
PART No.
treaded
710mm
(28”)
270mm (10.5”)
140mm (5.5”)
treaded
INSULATED GENERAL SERVICE SHOVEL
SV35IT/O/P
All POWER PYLON tools conform to BS3388 and BS8020:2011, and are individually electrically
tested to the requirements of BS8020:2011. The POWER PYLON socket is electrically nonconductive and requires no insulating covering.
710mm
INSULATED RABBITING SPADE
SP44IT/O/P
255mm (10”)
treaded
INSULATED GRAFTER
SV31IT/O/P
POWER PYLON tools conform to BS3388 and perform to British Standards for digging tools. They
are not intended as alternatives for the JAFCO tools designed for extreme wear and conditions of
use (pages 6-7), but are suitable for lighter duty uses.
treaded
INSULATED NEWCASTLE DRAINER
SV53IT/O/P
320mm (12.5”)
blade width
treaded
INSULATED CABLE LAYER
SV07IT/O/P
(28”)
The NUPLA POWER PYLON socket is a totally new concept in digging tools. By replacing the
necked metal socket in traditional tools with a uniquely designed rigid, fibreglass-reinforced
socket, POWER PYLON SHOVELS AND SPADES are significantly lighter weight than traditional
versions. Being lighter than the traditional tools, POWER PYLON tools reduce fatigue for the user.
treaded
INSULATED SHOVEL, NARROW TRENCH
SV26IT/O/P
710mm
blade length
POWER PYLON SHOVELS & SPADES
PART No.
JAFCO
710mm
(28”)
270mm (10.5”)
205mm (8”)
forward flat tread
7
DESCRIPTION
DIGGING SPADE /
TRENCH SHOVEL
overall length
DRAINER
blade length
blade width
INSULATED E-SERIES POWER PYLON SHOVELS
& SPADES
- sleeved fibreglass-cored shaft, integral D-grip, orange
SP14DP/IT/O
E-Series - Square Mouth Shovel
990mm
(39”) 295mm (111/2”) 245mm (91/2”)
RP14DP/IT/O
E-Series - Round Mouth Shovel
990mm
(39”) 295mm (111/2”) 220mm (83/4”)
GS14DP/IT/O
E-Series - Digging Spade / Trench Shovel
990mm
(39”) 295mm (111/2”) 175mm
SS14DP/IT/O
E-Series - Drainer
8
(7”)
1030mm (401/2”) 350mm (133/4”) 140mm (51/2”)
11
2011/09
JAFCO
POWER PYLON SHOVELS & SPADES
JAFCO
JAFCO INSULATED LIGHTWEIGHT POWER PYLON TOOLS are available in two versions :
INSULATED
LONG-HANDLED SPADES
Special JAFCO designs for deep and restricted excavations, and
difficult ground conditions.
E-SERIES,
having NUPLAGLAS-cored shafts with contoured orange sleeving
incorporating integral D grips ( page 8, opposite )
CLASSIC,
this page )
Detail photographs show Standard (left) and Heavy Duty (right) versions.
having heavier solid NUPLAGLAS orange shafts with plastic YD grips (page 9,
The Heavy Duty versions, recommended for street lighting work, have a
heavy duty JAFCO-designed super-socket welded to the blade, and
large diameter shafts.
Insulated Newcastle Drainer
Insulated Grafter
SQUARE MOUTH
PART No.
ROUND MOUTH
DESCRIPTION
DIGGING SPADE /
TRENCH SHOVEL
overall length
DRAINER
blade length
blade width
Insulated GPO Rabbiting Spade
& SPADES
- solid orange fibreglass shaft, black plastic YD-grip
INSULATED POWER PYLON CLASSIC SHOVELS
SP14PD/PC/IT/O
Classic - Square Mouth Shovel
990mm (39”) 295mm (111/2”) 245mm (91/2”)
RP14PD/PC/IT/O
Classic - Round Mouth Shovel
990mm (39”) 295mm (111/2”) 220mm (83/4”)
GS14PD/PC/IT/O
Classic - Digging Spade / Trench Shovel
990mm (39”) 295mm (111/2”) 175mm
SS14PD/PC/IT/O
Classic - Drainer
12
2011/09
(7”)
1030mm (401/2”) 350mm (133/4”) 140mm (51/2”)
9
Insulated Rabbiting Spade
13
JAFCO
JAFCO
LONG HANDLED SPADES
LONG HANDLED SPADES
JAFCO has developed special INSULATED LONG-HANDLED SPADES, including GRAFTERS, DRAINERS,
RABBITTING SPADES and GPO RABBITTING SPADES, designed for deep and restricted excavations and
difficult ground conditions where wear is heavy, common in work such as street lighting, highway
works and fencing.
Heavy duty versions of the NEWCASTLE DRAINER, GRAFTER, and RABBITING SPADE are available.
The heavy duty tools have a larger diameter shaft and a heavy duty JAFCO-designed super-socket
welded to the blade, increasing the strength of the throat of the blade and the socket itself,
improving impact performance where ground is compacted or stony.
In exceptional circumstances, JAFCO can offer very heavy duty 38mm (11/2”) diameter fibreglass
shafts.
Lengths can be shortened to suit individual preferences, and longer lengths on heavy duty and
very heavy duty versions on selected tools are available.
have orange solid NUPLAGLAS fibreglass shafts bonded to the
sockets. Every tool is individually electrically tested. Blades conform to BS3388 for shape,
dimensions and performance of tools.
INSULATED LONG HANDLED SPADES
The heavy duty versions have a large diameter shaft and a heavy duty JAFCO-designed supersocket welded to the blade.
PART No.
DESCRIPTION
LONG INSULATED NEWCASTLE DRAINER
This blade is sometimes known as a ‘Graft’, but has a tapered, longer blade than the
diagram opposite, and blade dimensions on page 5).
SP34ND/O
SP34ND/HD/O
STANDARD LONG INSULATED NEWCASTLE DRAINER
- solid NUPLAGLAS fibreglass shaft, 32mm (11/4"
) dia.
GRAFTER
(see
overall length 1980mm. (78”)
HEAVY DUTY LONG INSULATED NEWCASTLE DRAINER, with super-socket
- solid NUPLAGLAS fibreglass shaft, 35mm (13/8" ) dia.
overall length
Longer lengths available by negotiation
2055mm. (81”)
LONG INSULATED GRAFTER
Shape, dimensions and performance of GRAFTER blade as defined in BS 3388.
(see diagram opposite, and blade dimensions on page 5).
SP37GR/O
SP37GR/HD/O
STANDARD LONG INSULATED GRAFTER
- solid NUPLAGLAS fibreglass shaft,
32mm (11/4" ) dia.
HEAVY DUTY LONG INSULATED GRAFTER, with super-socket
- solid NUPLAGLAS fibreglass shaft, 35mm (13/8" ) dia.
Longer lengths available by negotiation.
overall length 1980mm. (78")
LONG INSULATED RABBITING SPADE
(see diagram opposite, and blade dimensions on page 5).
SP44RS/O
SP44RS/HD/O
STANDARD LONG INSULATED RABBITING SPADE
- solid NUPLAGLAS fibreglass shaft, 32mm
(11/4" ) dia.
overall length 1930mm. (76”)
HEAVY DUTY LONG INSULATED RABBITING SPADE, with super-socket
- solid NUPLAGLAS fibreglass shaft, 35mm (13/8") dia.
overall
Longer lengths available by negotiation.
length 1930mm. (76")
INSULATED GPO RABBITING SPADE
Occasionally preferred where soil removal is considered an important requirement.
Bulldog 5391 (GPO) blade, welded socket.
NEWCASTLE
DRAINER
14
10
HEAVY DUTY
NEWCASTLE
DRAINER
GRAFTER
HEAVY DUTY
GRAFTER
RABBITING
SPADE
GPO RABBITING
SPADE
2011/09
SP72RB/2/O
STANDARD INSULATED GPO RABBITING SPADE
SP72RB/3/O
HEAVY DUTY INSULATED GPO RABBITING SPADE.
2011/09
(11/4" ) dia.
(13/8" ) dia.
15
11
JAFCO
JAFCO
CROWBARS and DIGGING BARS
CROWBARS and DIGGING BARS
Crowbars and Digging bars are essential tools for ground operations. JAFCO has developed a
range of INSULATED CROWBARS and DIGGING BARS with NUPLAGLAS fibreglass shafts to reduce the
risks to operator safety from cable strike, when underground cables may be present.
For safe use INSULATED CROWBARS and DIGGING BARS are only available as single ended. With
choice of chisel or point or heel carbon steel ends (EN8 or equivalent) in INSULATED CROWBARS,
and chisel or point ends in INSULATED DIGGING BARS.
Fibreglass shaft size has been selected to
optimise breaking strength and deflection (bend) of these tools in use.
JAFCO INSULATED CROWBARS and INSULATED DIGGING BARS have solid orange NUPLAGLAS fibreglass
shafts bonded to the heads, and every tool is individually electrically tested.
are used for digging in normal ground conditions and levering, and the steel chisel/
point/heel end has a long steel shank to allow use in levering tasks. The heel-ended crowbar is
recommended where the user’s policy is to avoid use of bars with vertical cutting edges in ground
where buried services may be present.
PART No.
DESCRIPTION
INSULATED CROWBARS
Single-ended with heavy duty black vinyl grip. Orange NUPLAGLAS fibreglass shaft. Chisel, point or heel
ends.
Standard length 1.5m (60”), or to user specification.
( Heavy duty NUPLAGLAS shaft, 38mm. dia. available, subject to enquiry)
- solid NUPLAGLAS fibreglass shaft, 35mm. (13/8”) dia.
Length 1.5m. (60”),
3.8kg.
CROWBARS
are used almost exclusively for digging, especially in difficult ground conditions, and
have a heavier chisel/point end than those offered on JAFCO CROWBARS.
DIGGING BARS
PLEASE NOTE : For slewing bars and crowbars for Railway Track Maintenance work, see the
JAFCO RAILWAY TRACK TOOLS brochure or ask us for advice; crowbars in this brochure are not
suitable for slewing rail.
CB60IT/ST/C/G/O Chisel end.
CB60IT/ST/P/G/O
Point end.
CB60IT/ST/H/G/O Heel end
INSULATED DIGGING BARS
Single-ended with heavy duty black vinyl grip. Orange NUPLAGLAS fibreglass shaft.
Standard length 1.8m (71”), or to user specification.
( Heavy duty NUPLAGLAS shaft, 38mm. dia. available, subject to enquiry)
LIGHT DUTY INSULATED DIGGING BAR
CROWBAR : CHISEL
DB72IT/LT/C/G/O
Chisel end.
DB72IT/LT/P/G/O
Point end.
STANDARD INSULATED DIGGING BAR
DIGGING BAR : CHISEL
16
12
2011/09
DB72IT/ST/C/G/O
Chisel end.
DB72IT/ST/P/G/O
Point end.
2011/09
Length 1.8m. (71”),
4.8kg.
Length 1.8m. (71”),
5.1kg
17
13
JAFCO
JAFCO
Narrow Bladed
Insulated Shovelholer
CONTRACTORS’ TOOLS
HEAVY DUTY INSULATED SHOVELHOLER
The JAFCO HEAVY DUTY INSULATED SHOVELHOLER is for digging and clearing spoil in narrow holes
which restrict the use of standard spades. The HEAVY DUTY INSULATED SHOVELHOLER should not
be used directly on solid surfaces such as tarmac and concrete, etc, or on hard and stony
ground, which first must be broken with the appropriate DIGGING BAR (see pages 12-13).
JAFCO’S HEAVY DUTY INSULATED SHOVELHOLER features high strength sockets and cross-over joint,
fixed securely to solid orange NUPLAGLAS fibreglass handles with epoxy bond.
The shafts are vertical when lifting the spoil to minimise fatigue and strain to the user’s back and
arms.
Jaw spread : 250mm (10”).
Available in three lengths.
Every JAFCO INSULATED SHOVELHOLER is individually electrically tested.
As robust as the conventional heavy duty Jafco Shovelholer but with
reduced blade width.
Width of blade 7” tapering to 6.25” at blade arc.
PART No
STANDARD BLADE
NARROW BLADE
70” SC48OS/2J/O SC48OS/3J/N/O
Standard 8.75 Blade
Narrow Blade
OPEN POSITION
for initial entry
PART No.
CLOSED POSITION
for withdrawal of spoil
SIDE VIEW
showing spade
blade
DESCRIPTION
HEAVY DUTY INSULATED SHOVELHOLER
SC48OS/2J/O
Solid NUPLAGLAS fibreglass handles,
overall length
1780mm
( 70” )
SC62OS/2J/O
overall length
2135mm
( 84” )
SC72OS/2J/O
overall length
2390mm
( 94” )
Standard 8.75 Blade
18
14
2011/09
Narrow Blade
19
JAFCO
INSULATED POST HOLE DIGGER
The JAFCO INSULATED POST HOLE DIGGER is designed for light digging and clearing spoil for fence
posts requiring a small diameter hole. For heavy digging (compacted, stony ground, etc.) the
POST HOLE DIGGER should be used in conjunction with a DIGGING BAR (see pages 12-13).
JAFCO’S INSULATED POST HOLE DIGGER features specially designed forged blades ( jaw spread
162mm (61/2”) ), and orange NUPLAGLAS fibreglass handles. The head is securely bolted to the
NUPLAGLAS handles.
Standard 1200mm (48”) handle.
JAFCO
INSULATED CROWBARS,
DIGGING BARS, SHOVELHOLERS
& HAMMERS
Single-ended with heavy duty black vinyl grips.
Chisel or point carbon steel ends.
Shovelholer for digging and clearing spoil; available in 3 lengths.
Crowbars (left) and Digging bars (right)
Every JAFCO INSULATED POST HOLE DIGGER is individually electrically tested.
POST HOLE DIGGER
Hammers and Sledgehammers
HANDLES
PART No.
DESCRIPTION
INSULATED POST HOLE DIGGER
PHD4/1J/O
20
2011/09
Orange
NUPLAGLAS
fibreglass handles,
overall length 1475mm (59”)
15
21
JAFCO
JAFCO
INSULATED BREAKING HAMMER - CAST IRON PIPING
PUNNERS & TAMPERS
The JAFCO INSULATED BREAKING HAMMERS were developed with National Grid (Transco) for the
task of breaking old cast iron gas mains piping, and are used in the cast iron gas mains
replacement programme.
These tools are designed for use in the vertical mode only, and should be used only by trained
operatives in accordance with the safe system of work defined by the user organisation.
JAFCO INSULATED PUNNERS AND TAMPERS feature solid NUPLAGLAS handles, providing a strength
and consistency not found in wooden handles.
In addition to the traditional Square- and Round-Head punners, the JAFCO range includes C- and
D-Head designs which are ideal for compacting earth around lamp standards, telegraph poles and
fencing posts.
Solid orange NUPLA fibreglass shaft, 38mm. (11/2”) diameter.
Alternative handle lengths available on request.
Every JAFCO INSULATED PUNNER AND TAMPER is individually electrically tested.
BREAKING HAMMER MARK
I
BREAKING HAMMER MARK
PART No.
III
DESCRIPTION
D-Pactor
INSULATED BREAKING HAMMER
Round
PB60BS/1J/O
INSULATED BREAKING HAMMER MARK I
- solid NUPLAGLAS fibreglass shaft, orange,
overall length 1500mm (60”),
PB87BS/3J/O
INSULATED BREAKING HAMMER MARK III
- solid NUPLAGLAS fibreglass shaft, orange,
overall length 2220mm (87”), 16.5kg (36lb)
10kg (22lb)
Square
Mini
D-Pactor
C-Pactor
INSULATED SOIL PROBE
The JAFCO INSULATED SOIL PROBE was developed at the request of SCOTIA GAS NETWORKS, and is
used to assist in identifying the locations of gas leaks.
Every JAFCO INSULATED SOIL PROBE is individually electrically tested.
PART No.
DESCRIPTION
PB48TH/2J/O
22
16
- solid NUPLAGLAS fibreglass
shaft, orange,
overall length 1270mm
PART No.
DESCRIPTION
PUNNERS & TAMPERS
PR10SQ/2R/OO
4.5kg (10lb)
Square Punner,
1350mm
(54”)
solid handle, orange
PR10RD/2R/OO
4.5kg (10lb)
Round Punner,
1350mm
(54”)
JP72IT/ST/C/O
‘C’ Pactor,
1800mm
(72”)
JP72IT/ST/D/O
‘D’ Pactor,
1800mm
(72”)
JP72MD/2J/O
Mini ‘D’ Pactor,
1800mm
(72”)
JP54MD/2J/O
Mini ‘D’ Pactor,
1350mm
(54”)
( 50”),
2011/09
2011/09
23
17
JAFCO
JAFCO
INSULATED HAMMERS
INSULATED PICK AXE HANDLES and HEADS
JAFCO’S INSULATED PICK HANDLES conform to British Standard BS 1421 and are designed to fit
heads with No. 6 universal eye conforming to BS 1421.
INSULATED PICK HANDLES are the profiled E-Series design, consisting of a hard-wearing orange polypropylene sleeve, over an extra heavy-duty fibreglass core. The integral supergrip provides a
safe hold for gloved hands.
Every JAFCO INSULATED PICK HANDLE is individually electrically tested.
All JAFCO INSULATED HAMMERS conform to BS876 AND BS8020:2011 and have orange NUPLAGLAS
fibreglass shafts bonded to the heads. Every tool is individually electrically tested to 10,000 volts
AC and certified to 1,000 volts in accordance with BS8020:2011.
Users should follow the advice on the safe use of Hand Hammers
contained in British Standard BS876:1995.
( heads sold separately )
Any striking tool is liable to chip if struck against another striking tool or
other hardened metal surface.
This may result not only in damage to the tool itself but possible bodily
injury to the user from flying fragments.
PART No.
USERS ARE ADVISED TO WEAR SAFETY GOGGLES
DESCRIPTION
INSULATED PICK HANDLE
Heavy duty fibreglass core, orange polypropylene sleeve, integral supergrip.
EE-I-NS6-118/O
INSULATED PICK HANDLE, SLEEVED E -SERIES,
For railway applications please see the JAFCO RAILWAY TRACK TOOLS brochure, which includes
specialised tools such as INSULATED KEYING HAMMERS and BRIDGE INSPECTION HAMMERS, and
contains details of NETWORK RAIL Catalogue Numbers and LONDON UNDERGROUND Part Numbers
and specifications.
orange
PICK & MATTOCK HEADS
Heads only, for use with our JAFCO NUPLA pick handles.
Navvy pick axe head, with chisel and point ends;
Pick mattock with pick point and mattock ends;
Grubbing mattock with cutter and mattock ends.
PART No.
DESCRIPTION
INSULATED CLAW HAMMERS
Classic solid NUPLAGLAS orange fibreglass handle, with black “H Grip”.
PICK M ATTOCK
PICK AXE
(chisel, point)
PICK HEADS
Conforming to British Standard BS 1421.
H/NS6CP
PICK AXE HEAD
- chisel, point
3.2kg
(7lb).
H/NS6PM
PICK MATTOCK HEAD
- mattock, point
2.25kg
(5lb).
H/NS6GM
24
18
GRUBBING MATTOCK HEAD
- mattock, cutter
2.25kg
(5lb).
2011/09
AC20BS/O
CLAW
HAMMER,
20OZ.
overall length 13”
( 32mm.)
AC24BS/O
CLAW
HAMMER,
24OZ.
( 35mm.)
2011/09
25
19
JAFCO
JAFCO
Interactive Web Catalogue
INSULATED HAMMERS
PART No.
JAFCO
RESERVED FORcreated
YOUR
by: NOTES
DESCRIPTION
INSULATED BALL PEIN HAMMERS
Classic solid NUPLAGLAS orange fibreglass handle, with black “H Grip”
BP24BS/O
BALL PEIN HAMMER, 24OZ.
( 35mm.)
BP32BS/O
BALL PEIN HAMMER, 32OZ.
( 40mm.)
INSULATED CLUB HAMMERS
Classic solid NUPLAGLAS orange fibreglass handle, with black “C Grip”.
CH25BS/O
CLUB HAMMER, 2.5LB.
( 25mm.)
CH40BS/O
CLUB HAMMER, 4LB.
( 25mm.)
INSULATED SLEDGEHAMMERS
E-series polypropylene sleeved
NUPLAGLAS
fibreglass handle in orange, with integral
DS04BS/O
SLEDGEHAMMER, 4LB.
( 70mm.)
DS07BS/O
SLEDGEHAMMER, 7LB.
( 80mm.)
DS10BS/O
SLEDGEHAMMER, 10LB.
( 90mm.)
DS14BS/O
SLEDGEHAMMER, 14LB.
( 90mm.)
Sledgehammers are also available with solid
“C grip”
26
20
NUPLAGLAS
SUPERGRIP
orange fibreglass Classic style handle, with black
2011/09
2011/09
27
21
© ma-design.com
JAFCO
JAFCO
JAFCO
Jafco Tools Limited
Access House
Wednesbury
West Midlands
WS10 7LE
UK
Tel: +44 (0) 121 556 7700
Fax: +44 (0) 121 556 7788
email: sales@jafcotools.com
28
www.jafcotools.com
HANDLES

jafco insulated digging tools insulated digging tools

Transcription

Similar documents

Klean Kanteen

Get info about What Is The Song Roulette By System Of A Down About

Residential Evaporative Coolers Essick Excel

Presented by: Andries Steegstra Listing #00000000000006914

BELLWIRE

Chesa Futura - Foster + Partners

Aluminum Inserts - Columbia Windows

Whispering Pine - The Villages

Sports Concessions Adult Beverage Products - Whirley

journal

Giving Every Child a Place to Belong