Full Catalog - Utility Solutions, Inc.

Transcription

Manufacturer of
HOT LINE TOOLS
Utility Solutions was founded in 1990. We design and manufacture hot line tools
and products for the electrical power industry.
We are Lineman driven. Our products are Field proven.
• We manufacture tools and products that
linemen WANT to use.
• Our product line focuses on safety, reliability
and ease of use.
• Each product is designed and built to exceed
industry standards and have a long and useful
life.
• All products are Made in USA (excluding
cutouts).
• We are innovators in load break technology,
fiberglass construction, materials selection,
and machining.
• Many products in this catalog were invented
by linemen.
• We have the experience, resources and desire
to bring new products to market quickly and
efficiently.
Phone (828)323-8914
Fax
(828)323-8410
Email
sales@utilitysolutionsinc.com
Web
www.utilitysolutionsinc.com
101 33rd Street Drive SE · Hickory, NC 28602
UTILITY SOLUTIONS
PRODUCT CATALOG
Load Break Tools
LOAD-RANGER® XLT Load Break Tool
6
BREAK-SAFE® Load Break & Pick-up Tool
8
10
BREAK-SAFE® 600 Load Break & Pick-up Tool
Fuse-Safe‌12
Overhead Distribution
Jack Jumper™ Cutout Bypass Tool
14
16
Grab-It™ Cutout Fuse Tube Remover
Jumper Hook
17
Jumper-Aid™18
Jumper-T19
Conductor Cleaning Clamp 20
21
Conductor Cleaning Brush
Varmint Shield
22
23
BLUE STRIPE® Heavy Duty Ice Roller
Overhead Fuse Cutouts
Overhead Cutouts
Expendable Fuse Tube Caps
Underground Distribution
Elbow-Mule‌
Universal URD Wrench
Pad Mount Multi-Tool
Strip-N-Coil‌
Fiberglass Hot Sticks
26
28
30
31
31
32
BLUE STRIPE® Telescopic Hot Sticks
36
BLUE STRIPE® Measuring Sticks
38
BLUE STRIPE® Heavy Duty Substation Sticks
39
BLUE STRIPE® Shotgun Sticks
40
BLUE STRIPE® Universal Straight Sticks
42
43
BLUE STRIPE® Switch Head Straight Sticks
BLUE STRIPE® Disconnect Head Straight Sticks
43
BLUE STRIPE® Sectional Disconnect Sticks
44
Snap On Adapters for Disconnect Sticks
45
Bags for Sectional Disconnect Sticks
45
BLUE STRIPE® Discharge Hook
46
BLUE STRIPE® Rescue Hook
47
BLUE STRIPE® Severe Weather Stick
47
Hot Stick Accessories
48
Spline Torque Bar
48
Protective Bags for Fiberglass Sticks
50
Bucket Stick Storage Case
50
Boom Holster
51
BLUE STRIPE® Cloth52
BLUE STRIPE® Wipes52
53
BLUE STRIPE® Hot Stick Wax
53
BLUE STRIPE® General Purpose Cleaner
2
Metering Products
Meter Grabber
Electric Meter Jumper Leads
Low Voltage Bypass Tool
Safety & Training
Load-Trainer‌
Grounds Tester
Tool Demonstration Trailers
56
57
58
60
62
63
Rubber Goods
Insulated Rubber Blankets
66
Blanket Clamp
67
67
Blanket Buttons
Klondike Clamp
68
69
Blanket Mate Heavy Duty Blanket Holder
Jumper Hook
70
Jumper-Aid™71
Bucket Mate Polymeric Hook
72
Appendix
LOAD-RANGER® XLT Parts Guide
74
BREAK-SAFE® Parts Guide
77
83
Telescopic Hot Sticks Parts Guide
Shotgun Sticks Parts Guide
89
92
Sales Representative Directory
Standard Terms and Conditions of Sale
95
Index97
Phone (828)323-8914
Fax
(828)323-8410
Email
sales@utilitysolutionsinc.com
Web
101 33rd Street Drive SE · Hickory, NC 28602
3
Load Break Tools
LOAD-RANGER® XLT
Load Break Tool
6
BREAK-SAFE® Load Break
& Pick-up Tool
8
BREAK-SAFE® 600 Load Break
& Pick-up Tool
10
Fuse-Safe‌
12
LOAD-RANGER®
Load Break Tools
USLR-XLT
COMPARISON
LIGHT
LOAD-RANGER®
USLR-XLT -1
MAXIMUM VOLTAGE
27 kV
27 kV - 38 kV
27 kV - 38 kV
900 AMP
900 AMP
900 AMP
WEIGHT
4 lb 3 oz
5 lb 6 oz
4 lb 12 oz
6 lb
OPTIONAL
MANDATORY
OPTIONAL
MANDATORY
8.2” EST
7.1” EST
12.2” EST
10” EST
TOP LOCATION
UNIQUE SIDE
LOCATION
NO PINCH DESIGN
TOP LOCATION
UNIQUE SIDE
LOCATION
NO PINCH DESIGN
OPTIONS
The XLT line is offered with numerous
options including a Pad Mount
version, hard case, soft case,
extended insulated hood and an
economical non-counter version.
The XLT line was designed to be user
friendly and simple to operate. It incorporates
an optional counter and a unique reset button
located on the side which allows full tool
reset without glove removal. This results in NO
MORE PINCHED FINGERS. Spare parts are
readily available and inspection and maintenance
procedures are easy to follow.
USLR-XLT-1
USLR-XLT-2
The Pad Mount option “P” uses a
uniquely designed operating arm
that creates a lower profile to provide
maximum clearance for the tight
confines in pad gear. This option also
comes standard with an extended
insulated hood.
add “H”
for Hard Case
EASY
COMPETITION
27 kV
RESET FUNCTION
The Utility Solutions
XLT product line
has the highest
measured metalto-metal clearance
of any load break
tool. This greatly
reduces flash-over
potential during
operation.
LOAD-RANGER®
USLR-XLT -2
900 AMP
METAL TO METAL CLEARANCE
DURING STROKE
(FLASH-OVER RESISTANCE)
SAFE
COMPETITION
MAXIMUM AMPERAGE
COUNTER AVAILABLE
USLR-XLT-1
6
USLR-XLT
Lightweight, User-Friendly Portable Load Break Tool
LOAD-RANGER® XLT Load Break Tool
Weighing under 5 pounds,
the XLT line of Load Break
Tools are by far the lightest
portable load break tools
available in the world. The
XLT-1 is approximately
1 lb 3 oz lighter than the
competition. Tool weight
becomes
extremely
important
when
attached to the end of
a fiberglass operating
stick. The lighter the
better for optimum
tool control and
minimal operator
fatigue.
LOAD-RANGER®
Load Break Tools
add “S”
for Soft Case
add “E”
for Extended Hood
add “NC”
for No Counter
HOW TO ORDER:
USLR-XLT-1
UP TO 27 kV RATED, 900 AMP WITH COUNTER
USLR-XLT-2
27 kV - 38 kV RATED, 900 AMP WITH COUNTER
Most Common Versions:
USLR-XLT-1-H LOAD-RANGER® XLT Load Break Tool,
27 kV RATED, 900 AMP WITH COUNTER AND HARD
CASE
USLR-XLT-2-H LOAD-RANGER® XLT Load Break Tool,
27 kV -38 kV RATED, 900 AMP WITH COUNTER AND
HARD CASE
p.828.323.8914 f.828.323.8410
7
BREAK-SAFE®
Load Break Tools
USBS
BREAK-SAFE®
Load Break Tools
USBS
MINIMUM SAFE DISTANCE
BREAK-SAFE® Load Break & Pick-up Tool
In order to keep personnel
at a safe distance, the
BREAK-SAFE® is operated
with an insulated fiberglass
hot stick for load break
and load pick-up functions.
The BREAK-SAFE® is a jumper clamp that
functions like a portable switch. It is designed
to operate on overhead distribution lines in
conjunction with a mechanical jumper.
The Yellow Safety Lock is
also operated by a hot stick
and helps prevent the tool
from an unintended load
break or pick-up operation.
BREAK-SAFE®
OPERATIONAL
VOLTAGE
USBS-15
USBS-27
USBS-46
15 kV
27 kV
46 kV
LOAD BREAK RATING
LOAD PICK-UP
RATING
300 AMP
200 AMP
CONTINUOUS
CURRENT RATING
The BREAK-SAFE® has
three operating functions:
Floating Head
• LOAD BREAK
• LOAD PICK-UP
• CONTINUOUS
CURRENT DUTY
Duckbill Head
The BREAK-SAFE® is
available with either a
Floating or a Duckbill
Head and comes in
three models:
• 15 kV / 300 amp
• 27 kV / 300 amp
• 46 kV / 200 amp
8
CONDUCTOR SIZE
OPTIONS
There are two case
options
to
keep
the
BREAK-SAFE®
protected
during
transport and storage.
The new Hard Case
is lockable and water
tight.
WEIGHT
DIMENSIONS (approx)
#6 COPPER MIN. up to 954 ACSR
(1.1” dia.) MAX.
7 lb 1 oz
7 lb 14 oz
10 lb 1 oz
27” long x
2.5” dia.
31” long x
2.5” dia.
39” long x
2.5” dia.
PATENT NO. 6,078,008 Other Patents Pending
Hard Case
Soft Case
HOW TO ORDER:
USBS-15-1-PS
15 kV - 300 AMPS WITH FLOATING HEAD
USBS-15-2-PS
15 kV - 300 AMPS WITH DUCKBILL HEAD
USBS-27-1-PS
USBS-27-2-PS
USBS-46-1-PS
USBS-46-2-PS
USBS-xx-x-PS-S
ADD OPTIONAL SOFT CASE
USBS-xx-x-PS-H
ADD OPTIONAL HARD CASE
p.828.323.8914 f.828.323.8410
9
Load Break Tools
BREAK-SAFE®
USBS
BREAK-SAFE® 600 Load Break & Pick-up Tool
BREAK-SAFE®
Load Break Tools
USBS
600 Amp
7.2 - 27 kV
INDUSTRY FIRST
Introducing the industry’s first
portable switch rated at 600
amp for all three tool functions:
load break, load pick-up and
continuous current duty.
It is fully rated from 7.2 kV to
27 kV.
FEATURES
Some of the unique patent
pending features include
an extra large clamp
capable of handling
all wire sizes up to
nearly 2” diameter.
Dual
conductor bars
allow the use of
two mechanical jumper
clamps, which is needed
to go above the typical 300
amp rating of mechanical
jumpers.
10
SAFETY
The USBS-600
is designed with
a patent pending
internal safety lock. If
the tool is not reset, the
tool will not open. An
external, manual locking
pin keeps the tool either
locked open or closed,
until the operator is ready.
This tool
features durable
electrical grade
fiberglass
housings and
a glove friendly
design.
Extra Large Clamp
COMPARISON
OPERATIONAL VOLTAGE
Dual Conductor Bars
BREAK-SAFE®
USBS-600-1
BREAK-SAFE®
USBS-15
BREAK-SAFE®
USBS-27
7.2 - 27 kV
15 kV
27 kV
LOAD BREAK RATING
LOAD PICK-UP RATING
CONTINUOUS CURRENT
RATING
CONDUCTOR SIZE
WEIGHT
DIMENSIONS
600 AMP
300 AMP
All sizes
up to 2” dia.
#6 COPPER MIN. up to
954 ACSR (1.1” dia.) MAX.
10 lb 13 oz
7 lb 1 oz
7 lb 14 oz
32” long x approx.
3.5” dia.
2.5” dia.
2.5” dia.
Optional Soft Case
- Portable Switch
- 7.2 kV - 27 kV Range
- 600 amp
- Safe & Durable
HOW TO ORDER:
USBS-600-1
BREAK-SAFE® 600 AMP
USBS-600-1-S
WITH SOFT CARRYING CASE
p.828.323.8914 f.828.323.8410
11
‌
Fuse-Safe
Load Break Tools
USFS
Fuse-Safe‌
Lightweight, Portable Protection.
The Fuse-Safe‌is a temporary, portable current-limiting fuse and fault close-in
protection tool. This device offers an easier and safer method of protection compared
to traditional cut-out based devices which rely on fuse tubes and bulky insulators.
This device is extremely useful when placed in series with the Utility Solutions
BREAK-SAFE®.
The Fuse-Safe‌is the best choice for Fire prevention
areas which cannot use open fuse tube devices.
The
current-limiting
fuse
design will not expel hot metal
or gases when triggered.
Minimize Failures: Thomas
& Betts fuses, with interrupting
capability of up to 50,000 amps,
substantially reduces energy
pass through to minimize the
risk of catastrophic failures.
The Fuse-Safe‌consists of two
components: an upper duckbill
Duckbill Clamp
coupling ring and a lower
conductor bar coupling ring. These components directly attach
to any 5/8” studded end current limiting fuse using a standard
1/8” Allen wrench (provided). The fuse is easily replaced with
only two Allen screws.
The Fuse-Safe‌USFS-001/2 use a 5/8” diameter conductor bar
while the USFS-003/4 models use a 3/8” diameter conductor bar.
USFS-002/4 models include a current limiting fuse provided by
Thomas & Betts Hi-Tech Fuses. Our website has a complete list
of fuse options.
USFS-001
FUSE-SAFE‌5/8” CONDUCTOR BAR WITHOUT CURRENT
LIMITING FUSE
USFS-002
FUSE-SAFE‌5/8” CONDUCTOR BAR WITH FUSE
INCLUDED
USFS-003
FUSE-SAFE‌3/8” CONDUCTOR BAR WITHOUT CURRENT
LIMITING FUSE
USFS-004
FUSE-SAFE‌3/8” CONDUCTOR BAR WITH FUSE
INCLUDED
12
p.828.323.8914 f.828.323.8410
14
16
Jumper Hook
17
Jumper-Aid™
18
Jumper-T
19
Conductor Cleaning Clamp
20
21
Varmint Shield
22
23
Jack Jumper™
USJJ
All Jack Jumper™ Cutout Bypass Tools are rated at 100 AMP. Installation and removal
is done with a shotgun stick.
Soft Case
14
p.828.323.8914 f.828.323.8410
USJJ
Safe And Simple Bypass Tool
The patented Jack Jumper™ Cutout Bypass Tool permits a safe and quick method to
temporarily bypass an overhead cutout without the tedious use of bulky jumper cables.
The tool is indispensable for fuse coordination tasks and permits easy bypass of an
underground dip. The Jack Jumper™ Cutout Bypass Tool saves time and money,
eliminates risk of service interruption and prevents accidental cross phasing.
Jack Jumper™
Catalog
Number
Description
Weight
USJJ-001-S
15 kV Cutout Bypass Tool
12 oz
USJJ-002-S
27 kV Cutout Bypass Tool
15 oz
USJJ-003-S
15 kV Chance® Load Break Cutout Bypass Tool
15 oz
USJJ-004-S
15 kV ABB‌Load Break Cutout Bypass Tool
USJJ-005-S
38 kV Cutout & S&C‌SMD-20 15 kV Power Fuse Bypass Tool
USJJ-006-S
S&C‌SMD-20 27 kV Power Fuse Bypass Tool
1 lb 4 oz
USJJ-007-S
S&C‌SMD-20 38 kV Power Fuse Bypass Tool
1 lb 14 oz
USJJ-008-S
27 kV Chance® Load Break Cutout Bypass Tool
1 lb 2 oz
USJJ-009-S
27 kV ABB‌Load Break Cutout Bypass Tool
1 lb 2 oz
15 oz
1 lb 3 oz
p.828.323.8914 f.828.323.8410
15
Grab-It™
GRAB-IT
Jumper Hook
Jumper Hook
Eliminate Jumper
Lead Sag
GRAB-IT
The patented Grab-It™
GRAB-IT-1
offers a simple and economical
method to safely remove or install
overhead fuse barrels. The Grab-It™
design provides positive control of the fuse barrel even in high wind conditions to
prevent accidental drops. No need to find the fuse barrel pull ring or lifting eye which
is difficult in low lighting conditions. Simply sweep
behind the fuse barrel and lift. The Grab-It™ works
as well at the end of a 50
ft telescopic as it does at
the end of an 8 ft bucket
stick. Requires no special
stick movement or
procedure to operate.
The Grab-It™ is
machined from aircraft
grade aluminum to
provide years of trouble
free operation. The GrabIt™ has no moving parts,
no springs and no plastic
parts to break.
GRAB-IT-3
Works well on a 50 ft telescopic
or an 8 ft bucket stick.
GRAB-IT-1
GRAB-IT-2
FUSE TUBES
100 AMP
100 & 200 AMP
SMU-20
DIMENSIONS
4.5” x 4.5” x 4”
4.5” x 4.5” x 4”
6” x 4.5” x 4”
11 oz
11 oz
15 oz
WEIGHT
USJH-001
Product Dimensions:
11” x 4.5” x .5”
Product Weight: 6 oz
The Jumper Hook is
designed to eliminate
jumper clamp sag and
prevent potential cross-phasing situations without the
time consuming use of tape, bungee cords or rope.
The Jumper Hook also minimizes a jumper clamp
swaying in high wind conditions.
Simply hang multiple Jumper Hook units along the intended jumper clamp path and
let the tool cradle the jumper clamp. The Jumper Hook installs easily with a gloved
hand or shotgun stick. It will fit over any class 2 or 3 line hose and exhibits a flashover resistance of
over 50 kV.
The Jumper Hook
is made of a high
visibility polymer
material that can
handle the rigors
of daily use even in
cold temperatures.
GRAB-IT-3
*add “F” for Hi Visibility
HOW TO ORDER:
HOW TO ORDER:
GRAB-IT-1
100 AMP CUTOUT FUSE TUBE REMOVER
GRAB-IT-2
100 & 200 AMP CUTOUT FUSE TUBE REMOVER
GRAB-IT-3
SMU-20 CUTOUT FUSE TUBE REMOVER
USJH-001
p.828.323.8914 f.828.323.8410
16
USJH
JUMPER HOOK (6 per pack)
p.828.323.8914 f.828.323.8410
17
Jumper-Aid™
USJH
Jumper-T
Jumper-T
Jumper-Aid™
USJT
Safely Extend or
Park Jumpers
USJH-002
Product Dimensions: 14” x 10” x 1”
Product Weight: 1 lb 3 oz
The patented USJH-002 Jumper-Aid™ is designed
to
support
a
jumper wire during
construction,
maintenance,
or repairs. It is
particularly useful
when a jumper is required to be in the vicinity of a
conductor of a different voltage/phase. The USJH-002
allows for the mechanical jumper and or conductor to
be supported while wrapped in an insulating rubber
blanket and or line hose while eliminating the need
for rope or tape. The pivoting nature of the USJH-002
offers positive locking about the jumper/conductor.
The USJH-002 is also a useful tool to prevent jumper
“sag” about a cross arm.
USJT-001
USJT-001/002
Product Dimensions: 26.5” x 12”
Product Weight: 3 lb
The Jumper-T tool series eliminates the need for purchasing
bulky lengths of extra long jumper cables by allowing a lineman to
combine shorter sections of jumper cable.
Use the Jumper-T with a BREAK-SAFE® tool to
create a straight forward visible gap. Meets or
exceeds all applicable industry performance
criteria including OSHA 1926.951(d)(1) and
ASTM F-711.
Non-conductive foam filled fiberglass provides
over 15” of metal-to-metal clearance between
the upper duckbill clamp and the lower parking
stand. The upper duckbill clamp will tighten on
wire ranging from #6 copper up to 1033 MCM.
Both USJT-001 and USJT-002 are rated for 400
Amperes Continuous Current.
The USJT-001 is manufactured
using a solid horizontal aluminum
parking stand (11 1/4” long x 5/8” diameter).
Duckbill top clamp
USJT-002
The USJT-002 is manufactured using a bent handlebar
configuration (3/4” diameter aluminum) that allows for mechanical jumpers to be
clamped in both the horizontal and vertical plane. Attachment of jumpers in the
vertical plane minimizes sag and reduces the potential for cross-phasing to occur.
Custom sizes available - Call your Sales Representative for details.
HOW TO ORDER:
HOW TO ORDER:
USJH-002
JUMPER-AID™
p.828.323.8914 f.828.323.8410
18
USJT-001
JUMPER-T 5/8” DIA. STRAIGHT JUMPER BAR
USJT-002
JUMPER-T ¾” DIA. BENT JUMPER BAR
p.828.323.8914 f.828.323.8410
19
USCC
Cleaning Brush
USCC
Stick Operable
Brush
USCC-004
Includes
2 Brush Sets
USCC-001
Product Dimension: 12” x 5” x 5”
Conductor Size range: #4 minimum through 750 MCM maximum C-clamp design
The Utility Solutions Conductor Cleaner Clamp offers optimum conductor cleaning
prior to infield grounding and jumping connections. The C-Clamp design permits
either hand held operation or shotgun operation while providing a full 360 degree
conductor cleaning. USCC-001 Conductor Cleaning Clamp ships with the USCC002 and USCC-003 brush pad sets.
Brush pad sets are 5” in length and can be interchanged without the use of any
tools. Includes USCC-002 brush pad set for 250 MCM - 750 MCM conductors and
the USCC-003 brush pad set for #4 - 250 MCM conductors.
USCC-004/006
The unique design of the Conductor Cleaning Brush allows full 360 degree cleaning
and remote operation with the use of an insulated shotgun stick. Simply lock the
brush into a shotgun stick and push the “V” throat against the conductor to open
the jaws and enclose the conductor. Now place the shotgun stick in the unlocked
position but keep the conductor cleaner secured within the shotgun end. This will
permit the operator to provide a full 360 degree cleaning action on the conductor.
Stainless steel tension springs assure aggressive brush cleaning action to remove
even the most stubborn oxide layer.
When cleaning is completed return the shotgun stick to the locked position and
remove the tool.
If you are serious about obtaining a solid jumper or grounding connection our
cleaning brushes are a must.
Our conductor cleaners are machined from a tough weather resistant polymer.
All hardware is stainless steel to provide years of trouble free service. Brush set
replacement requires only a Phillips screwdriver.
USCC-005
USCC-006
USCC-002
USCC-003
CONDUCTOR CLEANING BRUSH
(includes USCC-002 & USCC-003)
USCC-002
REPLACEMENT BRUSH SET FOR 250 MCM - 750
MCM CONDUCTOR
USCC-003
REPLACEMENT BRUSH SET FOR #4 - 250 MCM
CONDUCTOR
20
WEIGHT
REPLACEMENT
BRUSH
3” - 11”
1 lb 3 oz
USCC-005
USCC-006
3/4”-3”
15 oz
USCC-007
HOW TO ORDER:
HOW TO ORDER:
USCC-001
CONDUCTOR
SIZE
USCC-004
p.828.323.8914 f.828.323.8410
USCC-004
3”-11” CONDUCTOR CLEANING BRUSH
(includes USCC-005)
USCC-006
CLEANING BRUSH
(includes USCC-007)
USCC-005
REPLACEMENT BRUSH SET FOR USCC-004
USCC-007
REPLACEMENT BRUSH SET FOR USCC-006
USCC-007
p.828.323.8914 f.828.323.8410
21
Varmint Shield
Varmint Shield
USVS
Installs with a
Shotgun Stick
Ice Roller
The Ice Roller is a ground-based ice
removal system for overhead lines. It will
safely and effectively remove ice buildup without damage to conductors. The
aluminum roller can accommodate ice
coated conductors up to 1¾” total diameter.
The non-impact design is safe for insulated
and non-insulated conductors.
Each component attaches with a metal
push-button and makes for easy transport
and storage.
USVS
Product Dimensions: 16” / 20” diameter x .5 “ thickness
Product Weight: 14 oz / 1 lb 5 oz
Color: Gray or Red
The 1¼” BLUE STRIPE® Fiberglass
sections are foam filled and meet or exceed
all applicable industry performance criteria
including ASTM F711 and OSHA Sub. V
sec. 1926.951(d).
The Varmint Shield is the proactive approach to eliminating animal related electrical
service interruptions. The varmint shield prevents critters from simultaneously
touching the primary and metal case of a transformer. The varmint shield can also
be installed about substation insulators and bushings. The unique design permits the
unit to be installed quickly with an insulated shotgun stick and without the need to drop
service or expose the lineman to energized equipment during installation.
The Ice Roller has been proven effective
in some of the coldest climates in North
America for more than 20 years. When ice
removal is a necessary and frequent job on
your system, choose the safe and effective
BLUE STRIPE® Heavy Duty Ice Roller.
The Varmint Shield is molded from a UV stabilized and flame retardant (UL 94 V-0)
polymer to provide many years of maintenance free in field service. The unique
design will not trap or accumulate fallen leaves and has no spring components to
break off, especially during cold weather installations. The Varmint Shield will handle
all distribution system applications and can
simultaneously address both high
voltage bushing and adjacent
arrestor bushing. Diameter
lines are molded into the unit
to provide an accurate and
easy in-field cutting template on
bushing diameters ranging from
1.75” to 6”.
USVS-001
16” VARMINT SHIELD - GRAY
USIR-005-CA
5’ ICE ROLLER (1 SECTION)
USVS-002
16” VARMINT SHIELD - RED
USIR-010-CA
10’ ICE ROLLER (1 SECTION)
USVS-003
20” VARMINT SHIELD - GRAY
USIR-015-CA
15’ ICE ROLLER (2 SECTIONS)
USVS-004
20” VARMINT SHIELD - RED
p.828.323.8914 f.828.323.8410
22
A Safe & Proven Ice
Removal System
Ice Roller Head
Male End
Female End
HOW TO ORDER:
HOW TO ORDER:
USIR
Components available separately - Call your
Sales Representative for details.
Pull Ring
p.828.323.8914 f.828.323.8410
23
Overhead Cutouts
26
28
Overhead Cutouts
Overhead Cutout
USCO
Overhead Cutout
USCO
RUS Approved
Porcelain
EQUIVALENT
TO:
S&C
USCO
A.B. Chance®
USCO-003
USCO-004
89021R10-CD
89022R10-CD
89033R10-CD
C710-112PB
C710-211PB
C710-213PB
USCO-001
Utility Solutions offers both porcelain and
polymeric cutouts for systems rated at
15kV and 27kV.
Utility Solutions Cutouts are RUS
approved.
Utility Solutions Cutouts
meet and or exceed all applicable ANSI
performance requirements with testing
performed at an accredited independent
laboratory.
Utility Solutions cutouts are manufactured
with the following standard features:
USCO-001
VOLTAGE
RATING
CONTINUOUS
CURRENT
BIL
LEVEL
INTERRUPTION
LEVEL
LEAKAGE
DISTANCE
SHIPPING
SIZE
SHIPPING
WEIGHT
USCO-001
15 kV
100 AMP
110 kV
10 kA (ASYM)
8.5”
19” x 13.5”
x 4.5”
17 lb 8 oz
USCO-003
27 kV
100 AMP
125 kV
8 kA (ASYM)
11.0”
15.5” x 13” x 5”
21 lb 8 oz
USCO-004
27 kV
100 AMP
125 kV
12 kA (ASYM)
11.0”
15.5” x 13” x 5”
21 lb 8 oz
USCO-003
Polymeric
• All electrical contacts are silver
plated.
• Tin plated parallel grooves are
standard.
• Groove 1 handles #6 solid through
#6 stranded.
• Groove 2 handles #2 solid through
25 mil or 4/0 ACSR.
• Heavy-duty galvanized sleet shield,
arcing horns and NEMA Type B
brackets are standard.
• Polymeric cutouts are manufactured
out of 100% silicone rubber, not a
polymer alloy.
• All mechanical fasteners are
manufactured from 304 stainless
steel.
USCO-005
26
EQUIVALENT
TO:
S&C
A.B. Chance®
USCO-007
VOLTAGE
RATING
CONTINUOUS
CURRENT
USCO-005
USCO-007
USCO-008
89021R10-PCD
89022R10-PCD (150
kV BIL)
89052R10-PCD (150
kV BIL)
CP710112-PB
CP710211-PB
CP710213-PB
BIL
LEVEL
INTERRUPTION
LEVEL
LEAKAGE
DISTANCE
SHIPPING
SIZE
SHIPPING
WEIGHT
USCO-005
15 kV
100 AMP
110 kV
10 kA (ASYM)
12.6”
17” x 14.5” x 5”
12 lb 14 oz
USCO-007
27 kV
100 AMP
150 kV
8 kA (ASYM)
24.8”
20” x 15.5 x 5”
14 lb 12 oz
USCO-008
27 kV
100 AMP
150 kV
12 kA (ASYM)
24.8”
20” x 15.5 x 5”
14 lb 12 oz
HOW TO ORDER:
see chart above
p.828.323.8914 f.828.323.8410
27
Overhead Cutout
USCO
USCO
Utility Solutions
Expendable Fuse Caps
are manufactured in
accordance with ANSI
C37.42 design criteria
concerning thread pitch
and venting pressure.
The Utility Solutions
line of expendable caps will work on all 100 and 200 Amp expendable fuse tubes.
Stamped “E” on button head signifies Expendable Cap.
Elbow-Mule‌
30
31
31
Strip-N-Coil‌
32
The USCO-062 & USCO-063 use a “stove pipe” design which directs expelled
gases vertically for close horizontal phase-to-phase construction.
GE Durabute part number
A.B. Chance
USCO-060
USCO-061
USCO-062
USCO-063
9F34ALW032
-
9F34ALW028
9F34ALW029
W700-0345
-
-
-
3872A21G01
161A292H04
3872A23G01
403A062G03
Cooper part number
F024X1C
F085X1C
-
-
Kearney part number
129052
129023
-
-
100 Amp
200 Amp
100 Amp
200 Amp
1.1” dia x 5/8” high
1.4” dia x 5/8” high
1.1” dia x 1.4” high
1.4” dia x 1.5” high
1 oz
2 oz
2 oz
3 oz
ABB part number
Fuse Tube Amperage Type
Size
Weight
HOW TO ORDER:
USCO-060
100 AMP EXPENDABLE FUSE TUBE CAP
USCO-061
200 AMP EXPENDABLE FUSE TUBE CAP
USCO-062
100 AMP STOVEPIPE EXPENDABLE FUSE TUBE CAP
USCO-063
200 AMP STOVEPIPE EXPENDABLE FUSE TUBE CAP
28
p.828.323.8914 f.828.323.8410
Elbow-Mule‌
USEP
Elbow-Mule‌
Underground Distribution URD Wrench / Pad Mount Multi-Tool
USUW/USMT
Penta-head Wrench
Removes
Stubborn
Elbows
3/4” Hex Wrench
Aluminum & Stainless
Construction
Product Dimension: 12” x 5” x 2.5”
USEP-15-27
USUW-001
USEP-15-27/35
Product Dimensions: 24” x 7” x 1.5”
The Universal URD Wrench is a multi-functional tool designed
specifically for utility field personnel responsible for both electrical
and water services.
The Elbow-Mule‌is a standard insulated shotgun stick attachment designed to
remove stubborn seized elbows without applying destructive and dangerous
kinetic impact force.
The URD Wrench features an ANSI penta-head as well as a standard six point
¾” wrench incorporated on opposite ends of the handle. The stainless steel shaft
permits the easy prying of manhole covers and is also great for removing debris from
pad gear lock pockets. The shaft end doubles as a flat head screwdriver.
The Elbow-Mule‌applies consistent, controlled force in a highly localized manner
to free even the most stubborn elbow assembly.
The attachment legs permit an operator to utilize the tool on a wide variety of
transformer configurations and are manufactured from insulated fiberglass to
provide maximum safety to the operator and equipment.
USMT-001
Product Dimension: 10“ x 6“
All sockets 1/2 “ drive
Fits All Types of
Pad Gear on Most
Utility Systems
The Pad Mount Multi-Tool reduces the
number of tools required by an individual
to access pad gear. The Pad Mount MultiTool is supplied with the following easily
interchangeable ½” drive
sockets:
The elongated lug wrench design permits the user to apply
substantial torque to free stubborn fasteners, especially
3/4” Socket
penta-head bolts located near ground level.
5 Point Penta Socket
9/16” Deep Well Socket
Drag Link Socket
The lug wrench body is manufactured from chrome plated
cold rolled steel to provide years of trouble free field use.
HOW TO ORDER:
HOW TO ORDER:
USEP-15-27
15 kV & 27 kV ELBOW-MULE‌WITH STORAGE BAG
USUW-001
UNIVERSAL URD WRENCH
USEP-35
38 kV ELBOW-MULE‌WITH STORAGE BAG
USMT-001
PAD MOUNT MULTI-TOOL
p.828.323.8914 f.828.323.8410
30
p.828.323.8914 f.828.323.8410
31
Strip-N-Coil‌
USCS
Strip-N-Coil‌
USCS-001
Product Dimension: 1.75” Dia x 7.5”
The Strip-N-Coil‌is a time saving tool that permits easy cutting of the outer
insulation on underground cables.
Quickly twist the concentric neutrals
into a tight compact bundle for cutting.
It can also be used to install or remove
bushing inserts.
No more tedious twisting with pliers. The
Strip-N-Coil‌is designed for underground
cable from #2 through 750 MCM.
The Strip-N-Coil‌requires an electric drill
or a ratchet fitted with a 7/16” socket.
HOW TO ORDER:
USCS-001
STRIP-N-COIL‌
p.828.323.8914 f.828.323.8410
32
BLUE STRIPE® Telescopic Hot
Sticks
36
38
BLUE STRIPE® Heavy Duty
Substation Sticks
39
BLUE STRIPE® Shotgun Sticks
40
BLUE STRIPE® Universal
Straight Sticks
42
BLUE STRIPE® Switch Head
Straight Sticks
43
BLUE STRIPE® Disconnect Head
Straight Sticks
43
BLUE STRIPE® Sectional
Disconnect Sticks
44
Snap On Adapters for Disconnect
Sticks
45
46
continued. . .
continued
47
BLUE STRIPE® Severe Weather
Stick
47
48
Spline Torque Bar
48
Protective Bags for Fiberglass
Sticks
50
50
Boom Holster
51
BLUE STRIPE® Cloth & Wipes
52
BLUE STRIPE® Hot Stick Wax &
Cleaner
53
EPOXY RESIN
The BLUE STRIPE® Fiberglass Hot Stick line uses
Epoxy resin which is the most water resistant, durable
and longest lasting resin available and has superior electrical properties. Our sticks
have a very high resistance to failure due to water absorption or delamination.
HIGH PERFORMANCE CLOSED CELL FOAM
Tip sections and foam filled sticks offer an added measure of
safety by preventing water from entering the inside. Our superior
Closed Cell Foam construction is durable and long lasting;
extending the safety margin.
EASY TIP LOCK REPLACEMENT (patent pending)
Our patent pending Easy Tip
Lock
Replacement
feature
saves time and money. Buttons
can be replaced without sacrificing the entire tip section. The repair is easy enough to
be done in the field so sticks stay on the job longer and repair costs go down. Bucket
operable models not available with Tip Lock feature.
BLUE STRIPE® PATENTED ALIGNMENT FEATURE
The most revolutionary design change to hot sticks since fiberglass is our patented
BLUE STRIPE® alignment feature. Extending even our 50 footer is easy with this
ingenious button
alignment feature.
CNC MACHINED BUTTONS & SPLINE ENDS
The most vulnerable parts of any stick are the spring loaded plastic buttons and the
spline ends. Molded and cast parts can be less
expensive to produce, but are often less durable.
We machine each button and aluminum spline end
out of solid material.
36
USTS-050
50 FT.
15.2 m
68”
3 1/2”
11
20 lb
50’,45’,40’,35’,30’
USTS-045
45 FT.
13.7 m
66”
3 1/8”
10
16 lb 8 oz
45’,40’,35’,30’,26’
PROTECTIVE
BAG
OPERATING
LENGTHS
Our BLUE STRIPE® Fiberglass Hot Sticks meet all applicable industry standards,
including OSHA Sub V Sec. 1926.951(d) and ASTM F1826. Our U.S. production
capabilities are able to stay ahead of demand so we always have your next stick in
stock.
WEIGHT
Conventional fiberglass construction uses a woven
mat. This creates pockets and voids where dirt
and moisture can collect. Our unique non-woven
fiberglass is unidirectional which creates a smoother
surface. The BLUE STRIPE® Fiberglass Hot Sticks
have a lineman friendly grip, stay cleaner longer and
are easier to clean and meet standards.
APPROVED AND IN STOCK
NO . OF
SECTIONS
SMOOTHER SURFACE
USTS
BASE
DIAMETER
BLUE STRIPE® Telescopic Hot Sticks
Telescopic Sticks
CLOSED
LENGTH
USTS
SIZE
Telescopic Sticks
NEW Protective Bands Come Standard On Every Telescopic Stick.
GROUND OPERABLE w/ Tip Lock
USTS-040
40 FT.
12.2 m
65”
2 7/8”
9
13 lb 8 oz
40’,35’,30’,26’,21’
USTS-035
35 FT.
10.6 m
63”
2 5/8”
8
11 lb
35’,30’,26’,21’,17’
USTS-030
30 FT.
9.1 m
62”
2 3/8”
7
8 lb 14 oz
30’,26’,21’,17’
USTS-025
25 FT.
7.6 m
60”
2 1/8”
6
6 lb 14 oz
26’,21’,17’
USTS-020
20 FT.
6.2 m
58”
1 7/8”
5
5 lb 3 oz
21’,17’
USTS-016
16 FT.
4.9 m
56”
1 5/8”
4
4 lb
16’,12’
USSB-006
USSB-008
USSB-005
GROUND OPERABLE w/ Tip Lock and Heavy Duty Rubber Boot End Cap
USTS-045-BOOT
45 FT.
13.7 m
66”
3 1/8”
10
16 lb 8 oz
45’,40’,35’,30’,26’
USTS-040-BOOT
40 FT.
12.2 m
65”
2 7/8”
9
13 lb 8 oz
40’,35’,30’,26’,21’
USTS-035-BOOT
35 FT.
10.6 m
63”
2 5/8”
8
11 lb
35’,30’,26’,21’,17’
USTS-030-BOOT
30 FT.
9.1 m
62”
2 3/8”
7
8 lb 14 oz
30’,26’,21’,17’
USSB-006
USSB-008
GROUND OPERABLE w/ No Tip Lock
USTS-050-N
50 FT.
15.2 m
68”
3 1/2”
11
20 lb
50’,45’,40’,35’,30’
USTS-045-N
45 FT.
13.7 m
66”
3 1/8”
10
16 lb 8 oz
45’,40’,35’,30’,26’
USTS-040-N
40 FT.
12.2 m
65”
2 7/8”
9
13 lb 8 oz
40’,35’,30’,26’,21’
USTS-035-N
35 FT.
10.6 m
63”
2 5/8”
8
11 lb
35’,30’,26’,21’,17’
USTS-030-N
30 FT.
9.1 m
62”
2 3/8”
7
8 lb 14 oz
30’,26’,21’,17’
USSB-006
USSB-008
GROUND OPERABLE w/ No Tip Lock and Heavy Duty Rubber Boot End Cap
USTS-045-N-BOOT
45 FT.
13.7 m
66”
3 1/8”
10
16 lb 8 oz
45’,40’,35’,30’,26’
USTS-040-N-BOOT
40 FT.
12.2 m
65”
2 7/8”
9
13 lb 8 oz
40’,35’,30’,26’,21’
USTS-035-N-BOOT
35 FT.
10.6 m
63”
2 5/8”
8
11 lb
35’,30’,26’,21’,17’
USTS-030-N-BOOT
30 FT.
9.1 m
62”
2 3/8”
7
8 lb 14 oz
30’,26’,21’,17’
USSB-006
USSB-008
BUCKET OPERABLE w/ No Tip Lock
USTS-012
12 FT.
3.7 m
30”
2 5/8”
7
5 lb 11 oz
12’
USTS-010
10 FT.
3m
28”
2 3/8”
6
4 lb 11 oz
10’
USTS-008
8 FT.
2.5 m
26”
2 1/8”
5
3 lb 11 oz
8’
USTS-006
6 FT.
1.8 m
26”
1 7/8”
4
2 lb 8 oz
6’
USTS-004
4 FT.
1.2 m
26”
1 5/8”
3
2 lb
4’
USSA-ETE*
5 FT.
1.5 m
56”
1 1/4”
1
1 lb
adds 56”
USSB-003
OPTIONS:
Protective Bag
Heavy Duty Rubber Boot
5 FT Extension w/ Spline Ends
p.828.323.8914 f.828.323.8410
37
Measuring Stick
USTS-M
Key features include:
•Dual Button Design For Added Strength
•High Performance Closed Cell Foam Filled Inner Section
•Compact Telescopic Design
•Patented BLUE STRIPE® Alignment Feature
Our BLUE STRIPE® Fiberglass Hot Sticks meet all applicable industry standards,
including OSHA Sub V Sec. 1926.951(d) and ASTM F711.
Our Measuring Stick is the only round, telescoping hot stick
available in EIGHT different sizes. Choose from 16’ to 50’,
English or Metric versions.
Description
Our epoxy resin and unique non-woven fiberglass construction
creates a smoother surface that resists water absorption. Our
CNC machined spline end and buttons will hold up to the rigors
of daily use.
MM - Meters / Centimeters
EM - Feet / Inches
SIZE
CLOSED
LENGTH
WEIGHT
OPERATING
LENGTHS
USTS-050-EM
USTS-050-MM
50 ft.
15.2 m
68”
20 lb
50’,45’,40’,35’,30’
USTS-045-EM
USTS-045-MM
45 ft.
13.7 m
66”
16 lb 8 oz
45’,40’,35’,30’,26’
USTS-040-EM
USTS-040-MM
40 ft.
12.2 m
65”
13 lb 8 oz
40’,35’,30’,26’,21’
USTS-035-EM
USTS-035-MM
35 ft.
10.6 m
63”
11 lb
35’,30’,26’,21’,17’
USTS-030-EM
USTS-030-MM
30 ft.
9.1 m
62”
8 lb 14 oz
30’,26’,21’,17’
USTS-025-EM
USTS-025-MM
25 ft.
7.6 m
60”
6 lb 14 oz
26’,21’,17’
USTS-020-EM
USTS-020-MM
20 ft.
6.2 m
58”
5 lb 3 oz
21’,17’
USTS-016-EM
USTS-016-MM
16 ft.
4.9 m
56”
4 lb
16’,12’
USTS-H02-DH
2 SECTION SUBSTATION STICK w/ DISCONNECT HEAD
USTS-H02-SE
2 SECTION SUBSTATION STICK w/ SPLINE END AND
HOT STICK PROBE
USTS-H02-SH
2 SECTION SUBSTATION STICK w/ SWITCH HEAD
USTS-H02-QC
2 SECTION SUBSTATION STICK w/ QUICK CONNECT
HEX HEAD
USTS-H03-DH
3 SECTION SUBSTATION STICK w/ DISCONNECT HEAD
USTS-H03-SE
3 SECTION SUBSTATION STICK w/ SPLINE END AND
HOT STICK PROBE
USTS-H03-SH
3 SECTION SUBSTATION STICK w/ SWITCH HEAD
USTS-H03-QC
3 SECTION SUBSTATION STICK w/ QUICK CONNECT
HEX HEAD
HOW TO ORDER:
Collapsed
Length
Operating
Lengths
7’ 6”
13’, 12’, 11’, 10’
INNER: 1.25”
OUTER: 1.5”
6 lbs.
7’ 8”
18’ 6”, 17’ 6”,
16’ 6”, 15’ 6”,
13’ 3”, 12’ 3”,
11’ 3”, 10’ 3”
INNER: 1.25”
MIDDLE: 1.5”
OUTER: 1.75”
9 lbs.
Diameter
Weight
DH - Disconnect Head
SE - Spline End & Hot Stick Probe
Protective
Bag
USSB-009 Protective Bag
Tip Lock Option Available Upon Request Only
SH - Switch Head
see chart above
QC - Quick Connect Hex Head
p.828.323.8914 f.828.323.8410
38
USTS
Our Substation Sticks are robust, compact and built for heavy duty substation
applications.
The BLUE STRIPE® Measuring Stick is our standard Telescopic
Hot Stick (no tip lock) with large, clear print running along side
our patented BLUE STRIPE® feature. Available in English (EM)
or Metric (MM) versions, this stick allows for easy and accurate
measuring while still functioning as a normal telescoping hot
stick.
METRIC
Substation Sticks
BLUE STRIPE® Heavy Duty Substation Sticks
ENGLISH
Add “-BOOT” for optional
Heavy Duty Rubber Boot
p.828.323.8914 f.828.323.8410
39
Shotgun Sticks
USSG
Shotgun Sticks
USSG
Standard model internal and external shotgun sticks utilize a full view side break hook
(hook pivots in the horizontal plane in relation to the hook release trigger).
BLUE STRIPE Shotgun Sticks
®
Utility Solutions offers both internal rod and external
rod fixed length shotgun sticks.
Add the -BBH designation* to any internal rod shotgun stick to specify a bottom break
hook (hook pivots in the vertical plane in relation to the hook release trigger).
Every Utility Solutions shotgun stick is manufactured
from the highest electrical grade insulated
fiberglass and meet or exceed all applicable
industry performance criteria including ASTM F711,
IEC 855, and OSHA Sub. R Section 1910.269 (J)
and OSHA Sub. V Section 1926.951(d).
Shotgun sticks are available with four standard end options:
Some of the features found on Utility Solutions
BLUE STRIPE® shotgun sticks include:
•
•
•
Replaceable shotgun hanger hooks are not
molded into the head, making replacement
quick and inexpensive if necessary.
The patented BLUE STRIPE® is positioned
on the shotgun stick to assist the operator by
acting as a visual aide to minimize equipment
drops. When the BLUE STRIPE® is positioned
facing upward the stainless steel hook will
open downward.
The operating hook is manufactured from
stainless steel to provide maximum strength
when pulling, pushing or twisting stubborn
equipment.
•
Multiple rod guides ensure smooth operation
of the external rod shotgun sticks.
•
External rod shotgun sticks are filled with high
performance closed cell foam to prevent water
absorption.
•
Universal spline ends are precision CNC
machined from aircraft grade aluminum. Utility
Solutions universal spline teeth simply will
not shear off as commonly occurs on cast
universal spline teeth.
EC - Rubber End Cap
FA - ½” Female Socket Adapter
QC - Quick Connect Hex Head
SE - Universal Spline End
INTERNAL
ROD
EXTERNAL
ROD
Size
Weight
PROTECTIVE
BAG
with Rubber End Cap (EC)
USSG-004-IREC
USSG-004-EREC
4’ 6”
1.4 m
4 lb 4 oz
USSB-005
USSG-006-IREC
USSG-006-EREC
6’ 6”
2m
5 lb 3 oz
USSB-007
USSG-008-IREC
USSG-008-EREC
8’ 8”
2.6 m
5 lb 14 oz
USSB-009
USSG-010-IREC
USSG-010-EREC
10’ 6”
3.2 m
6 lb 13 oz
USSB-011
with Universal Spline End (SE)
USSG-004-IRSE
USSG-004-ERSE
4’ 6”
1.4 m
4 lb 4 oz
USSB-005
USSG-006-IRSE
USSG-006-ERSE
6’ 6”
2m
5 lb 3 oz
USSB-007
USSG-008-IRSE
USSG-008-ERSE
8’ 8”
2.6 m
5 lb 14 oz
USSB-009
USSG-010-IRSE
USSG-010-ERSE
10’ 6”
3.2 m
6 lb 13 oz
USSB-011
with Female ½” Socket Adaptor End (FA)
USSG-004-IRFA
USSG-004-ERFA
4’ 6”
1.4 m
4 lb 4 oz
USSB-005
USSG-006-IRFA
USSG-006-ERFA
6’ 6”
2m
5 lb 3 oz
USSB-007
USSG-008-IRFA
USSG-008-ERFA
8’ 8”
2.6 m
5 lb 14 oz
USSB-009
USSG-010-IRFA
USSG-010-ERFA
10’ 6”
3.2 m
6 lb 13 oz
USSB-011
with Quick Connect Hex Head End (QC)
USSG-004-IRQC
USSG-004-ERQC
4’ 6”
1.4 m
4 lb 4 oz
USSB-005
USSG-006-IRQC
USSG-006-ERQC
6’ 6”
2m
5 lb 3 oz
USSB-007
USSG-008-IRQC
USSG-008-ERQC
8’ 8”
2.6 m
5 lb 14 oz
USSB-009
USSG-010-IRQC
USSG-010-ERQC
10’ 6”
3.2 m
6 lb 13 oz
USSB-011
*Add -BBH for optional Bottom Break Hook
Rugged and Versatile
Protective Bag
p.828.323.8914 f.828.323.8410
40
p.828.323.8914 f.828.323.8410
41
Straight Sticks
USSS
BLUE STRIPE® Foam Filled Straight Sticks
Straight Sticks
USSS
BLUE STRIPE® Switch Head Straight Sticks
USSS
All Utility Solutions straight sticks are manufactured from the highest quality electrical
grade fiberglass. Wall thickness has been engineered to provide the utmost in
mechanical strength to meet the rigors of pushing, pulling or twisting of stubborn
equipment.
Each stick interior is filled with a high performance closed cell
foam to prevent water absorption. The stick exterior has been
chemically sealed to provide a smooth surface texture for easy
cleaning.
Utility Solutions straight sticks meet or exceed all applicable industry performance
criteria including ASTM F711, ASTM F1826 and OSHA Sub. V sec. 1926.951(d).
BLUE STRIPE® Universal Straight Sticks
DIAMETER
ENDS
ENDS
PROTECTIVE
BAG
USSS-004-EC/SH
4’
1.2 m
1.25"
SWITCH HEAD / RUBBER END CAP
USSB-003
USSS-006-EC/SH
6’
1.8 m
1.25"
USSB-003
USSS-008-EC/SH
8’
2.5 m
1.25"
USSB-003
USSS-010-EC/SH
10’
3m
1.25"
USSB-003
USSS-012-EC/SH
12’
3.7 m
1.25"
USSB-003
USSS-H06-EC/SH
6’
1.8 m
1.5"
USSB-003
USSS-H08-EC/SH
8’
2.5 m
1.5"
USSB-003
USSS-H10-EC/SH
10’
3m
1.5"
USSB-003
USSS-H12-EC/SH
12’
3.7 m
1.25"
USSB-003
USSS-004-EC/DH
PROTECTIVE
BAG
USSS-S-104
4’
1.2 m
1.25"
SPLINE END / RUBBER END CAP
USSB-003
6’
1.8 m
1.25"
USSB-003
USSS-S-108
8’
2.5 m
1.25"
USSB-003
USSS-S-110
10’
3m
1.25"
USSB-003
USSS-S-112
12’
3.7 m
1.25"
USSB-003
USSS-H-110
10’
3m
1.5"
USSB-003
USSS-H-112
12’
3.7 m
1.5"
USSB-003
USSS-S-204
4’
1.2 m
1.25"
SPLINE END / SPLINE END
USSB-003
USSS-S-206
6’
1.8 m
1.25"
USSB-003
USSS-S-208
8’
2.5 m
1.25"
USSB-003
USSS-S-210
10’
3m
1.25"
USSB-003
USSS-S-212
12’
3.7 m
1.25"
USSB-003
USSS-H-210
10’
3m
1.5"
USSB-003
USSS-H-212
12’
3.7 m
1.5"
USSB-003
Each stick includes a replaceable, vinyl coated steel hanger.
42
DIAMETER
USSS-S-204
USSS-S-106
Don’t Forget
the Bag.
SIZE
BLUE STRIPE® Disconnect Head Straight Sticks
USSS-S-104
SIZE
USSS-004-EC/SH
p.828.323.8914 f.828.323.8410
SIZE
DIAMETER
ENDS
PROTECTIVE
BAG
USSS-004-EC/DH
4’
1.2 m
1.25"
DISCONNECT HEAD / RUBBER END CAP
USSB-003
USSS-006-EC/DH
6’
1.8 m
1.25"
USSB-003
USSS-008-EC/DH
8’
2.5 m
1.25"
USSB-003
USSS-010-EC/DH
10’
3m
1.25"
USSB-003
USSS-012-EC/DH
12’
3.7 m
1.25"
USSB-003
USSS-H06-EC/DH
6’
1.8 m
1.5"
USSB-003
USSS-H08-EC/DH
8’
2.5 m
1.5"
USSB-003
USSS-H10-EC/DH
10’
3m
1.5"
USSB-003
USSS-H12-EC/DH
12’
3.7 m
1.25"
USSB-003
Need a custom stick? We can make any size stick with any combination
of end attachments. Call the factory or your representative for all the avialable
options.
OPTION:
Quick Connect Hex Head
“QC” option available on any size straight stick
Example: USSS-008-EC/QC
p.828.323.8914 f.828.323.8410
43
Sectional Sticks
USDS
BLUE STRIPE® Sectional Disconnect Sticks
Sectional disconnect sticks snap together with interchangeable ends to create a
versatile and portable straight stick solution. Choose from three different top sections,
a base section with heavy duty rubber end cap, and optional extensions and snap on
adapters. Each section includes heavy-duty, push button connectors and are available
in either 1¼”(O) or 1½”(H) diameter sizes.
Sectional Sticks
USDS
Snap On Adapters for Disconnect Sticks
Snap on adapters are used with Sectional Disconnect Sticks to create double ended
straight sticks. Adapters are Interchangeable on any corresponding 1¼”(O) and
1½”(H) diameter Sectional Disconnect Sticks.
All Utility Solutions sectional sticks are manufactured from the highest quality electrical
grade fiberglass and are filled with a high performance closed cell foam to prevent
water absorption. The stick exterior has been chemically sealed to provide a smooth
surface texture for easy cleaning.
Top
Section
Base
Section
Extension
Section
MALE UNIVERSAL
SPLINE
Catalog
Number
MALE
DISCONNECT HEAD
FEMALE
BASE CAP
FEMALE UNIVERSAL
SPLINE
Description
Catalog
Number
Description
USDS-OAM-SE
1¼” Dia. Male Universal Adapter
USDS-HAM-SE
1½” Dia. Male Universal Adapter
USDS-OAF-SE
1¼” Dia. Female Universal Adapter
USDS-HAF-SE
1½” Dia. Female Universal Adapter
USDS-OAF-EC
1¼” Dia. Base Cap
USDS-HAF-EC
1½” Dia. Base Cap
USDS-OAM-DH
1¼” Dia. Male Disconnect Adapter
USDS-HAM-DH
1½” Dia. Male Disconnect Adapter
Bags for Sectional Disconnect Sticks
SE
DH
SH
B
E
Utility Solutions sectional sticks meet or exceed applicable industry performance
criteria including ASTM F711, ASTM F1826 and OSHA Sub. V sec. 1926.951(d).
Catalog Number
Size
Weight
Catalog Number
1 lb 9 oz
USDS-H04-XX
4’
.6 m
2 lb 4 oz
1¼” Diameter
Size
Weight
1½” Diameter
One Pocket
Case
Two Pocket
Case
2’ Length
Four Pocket
Case
USDS-BAG-32
USDS-BAG-42
USDS-BAG-34
USDS-BAG-44
USDS-BAG-16
USDS-BAG-26
USDS-BAG-36
USDS-BAG-46
USDS-BAG-18
USDS-BAG-28
2’
.6 m
USDS-004-XX
4’
1.2 m
2 lb 1 oz
USDS-H06-XX
6’
1.2 m
3 lb 5 oz
6’ Length
USDS-006-XX
6’
1.8 m
2 lb 14 oz
USDS-H08-XX
8’
1.8 m
4 lb 6 oz
8’ Length
USDS-008-XX
8’
2.5 m
3 lb 9 oz
USDS-H10-XX
10’
2.5 m
5 lb 15 oz
10’ Length
USDS-BAG-110
4’ Length
Three Pocket
Case
USDS-BAG-24
USDS-002-XX
USDS-BAG-14
HOW TO ORDER:
HOW TO ORDER:
see chart above
see chart above
p.828.323.8914 f.828.323.8410
44
Disconnect Stick
Length
p.828.323.8914 f.828.323.8410
45
Discharge Hook
USDH
Rescue Hook/ Storm Stick
USRH/USSS
USDH
The Utility Solutions BLUE STRIPE® Discharge Hook safely eliminates
a static charge after de-energizing. It is a 1¼” diameter, 4’ straight stick
made of high performance closed cell foam and includes a tin plated
copper “U” hook and 6’ of copper grounding cable attached to a Utility
Solutions aluminum clamp with serrated jaw.
It is also available as a 1’ universal spline attachment which can fit on
any length stick.
WARNING: Discharge Hooks are not grounding tools as described by
OSHA 1910.269 and carry no fault duty rating.
USRH-006/8
Product Dimensions: 8 1/3 ft.
Product Weight: 5 lb / 6 lb
/
10 1/3 ft.
The Utility Solutions Rescue Hook is designed to remove an injured worker from
a hazardous situation including confined spaces, on or near electrical gear or in
vaults.
The hook portion is manufactured out of tempered steel and then powder-coated in
high visibility safety yellow to resist corrosion and meets or exceeds ASTM F711.
The innovative design allows for the unit to ship as two separate components,
resulting in substantial shipping savings without sacrificing strength or
toughness.
HOW TO ORDER:
USRH-006
RESCUE HOOK 6 FT.
USRH-008
RESCUE HOOK 8 FT.
BLUE STRIPE® Severe Weather Stick
USDH-004
Extra Protection
USSS
Severe Weather Sticks provide a lineman with extra protection during inclement
weather. The tool consists of two rubber skirts added to the straight sticks that disrupt
water from forming an electrical path along the stick, thereby, improving the dielectric
properties of the stick.
USDH-001-SE
Available only in the universal spline end / rubber end cap configuration.
HOW TO ORDER:
HOW TO ORDER:
USSS-006-STORM
1¼” X 6’ STORM STICK
USDH-004
1¼” X 4’ (1.2 M) DISCHARGE HOOK
USSS-008-STORM
USDH-001-SE
1¼” X 1’ (.3 M) DISCHARGE HOOK ATTACHMENT
WITH SPLINE END
USSS-010-STORM
USSS-H06-STORM
1½” X 6’ STORM STICK
USSS-H08-STORM
USSS-H10-STORM
Custom sizes available, call factory.
46
p.828.323.8914 f.828.323.8410
p.828.323.8914 f.828.323.8410
47
Stick Accessories
USSA
Stick Accessories
USSA
We offer a wide range of hot stick accessories. All are tested and fit on a standard
Universal Spline(SE).
Catalog
Number
Name
USSA-ETE
56” FIBERGLASS EXTENSION SPLINE ATTACHMENT
Weight
Page
1 lb
35
USSA-ASD
POLYMERIC ICE REMOVAL SPLINE ATTACHMENT
1 lb
USSA-BRH
POLYMERIC REMOVAL HOOK SPLINE ATTACHMENT
4 oz
USSA-HGR
VINYL COATED STEEL HANGER & CLAMP
4 oz
USSA-HOE
HOE ATTACHMENT
8 oz
USSA-MSC
SHOESTRING CUTTER SPLINE ATTACHMENT (METAL)
4 oz
USSA-BRH
USSA-ODP
DOUBLE PRONG STICK END
4 oz
USSA-OEC
RUBBER END CAP FOR 1 1/4” DIA. FIBERGLASS
4 oz
USSA-OHP
UNIVERSAL HOT STICK PROBE
8 oz
UNIVERSAL HOT STICK PROBE WITH HI VISIBILITY
FLOURESCENT COATING
8 oz
USSA-ORB
ROTARY BLADE SPLINE ATTACHMENT
4 oz
USSA-ORP
ROTARY PRONG SPLINE ATTACHMENT
4 oz
USSA-OSE
UNIVERSAL SPLINE END FOR 1 1/4” DIA. FIBERGLASS
6 oz
USSA-PSC
SHOESTRING CUTTER SPLINE ATTACHMENT (PLASTIC)
4 oz
not shown
18” TORQUE BAR SPLINE ATTACHMENT
1 lb
Below
1/4”-20 THREADED STUD SPLINE ADAPTER
4 oz
USSA-OHP-F
USSA-STB-018
USSA-TSA
Spline Torque Bar
USSA-ASD
USSA-HGR
USSA-HOE
USSA-MSC
USSA-ODP
USSA-OEC
USSA-OHP
USSA-OHP-F
USSA-ORB
USSA-ORP
USSA-OSE
USSA-STB-018
Product Dimensions: ¼” Dia. x 18”
Product Weight: 1 lb
The Spline Torque Bar allows an operator to apply increased torque at a
safe distance to insulated shotgun stick applications (when equipped with a
universal spline end).
Tool consists of foam filled insulated fiberglass with a foam grip for operator
comfort. Specially designed universal end is precision CNC machined from
aluminum grade bar stock for superior strength.
HAVE AN IDEA. . . NEED
SOMETHING SPECIAL?
We are constantly designing and
engineering new tools and products
for the electric power industry. Call or
email us with YOUR ideas.
48
p.828.323.8914 f.828.323.8410
USSA-TSA
p.828.323.8914 f.828.323.8410
49
Bags & Cases
USSB/USBC
Protective Bags for Fiberglass Sticks
Utility Solutions offers a complete line of fiberglass hot stick storage bags. Every bag
is water resistant, mold resistant and incorporates a folded end snap lock.
Boom Holster
USBC
Boom Holster
Protect Your Investment
USBC-002
USSB-003
Protective Bag
USSB-005
USSB-006
USSB-007
Protective Bag
6” X 89”
USSG-006, USSS-006
USSB-008
Protective Bag
7.5” X 72”
USTS-030 thru USTS-040
6” X 36”
USTS-004 thru USTS-012
Protective Bag
6” X 65”
USSG-004, USSS-004, USTS-16 thru USTS-025
Protective Bag
8.5” X 78”
USTS-045, USTS-050
USSB-009
Protective Bag
6” X 113”
USSG-008, USSS-008
USSB-011
Protective Bag
6” X 135”
USSG-010, USSS-010
The Boom Holster is a unique, two-piece hot stick holder that easily mounts on a
boom. The rugged molded design is spring loaded at one end so an operator can
remove and insert a hot stick with just one hand.
Disconnect and NEMA Switch heads conveniently fit into a slot closest to the operator.
The Boom Holster is a convenient and safe way to secure a hot stick.
Installation is quick and easy with 3 supplied
straps, ratchets and rubber pads. It mounts
on round, square or oval booms of any size.
The Boom Holster can hold any length stick
and adjusts to accommodate different sticks
easily.
Product Dimension: 4 “ x 4 “ x 32 “
The Utility Solutions bucket stick storage case will work with any size bucket sick on
the market. Molded from tough waterproof blue polymer the bucket case conveniently
clips to the side of the bucket without the need to drill or otherwise modify the bucket.
The cover is secured to the base to prevent
accidental loss and drainage holes in the
base provide rain drainage to ensure the
interior stays dry. The cover/base design
permits bucket stick storage without the
need to rotate the hot
stick probe end and
permits one to grab
the stick body when
removing so as not
to extend the stick.
USBC-001
Bucket Storage
Case
4” X 32”
ALL 4’ thru 12’ BUCKET
STICKS
Your Favorite
Stick Is Always
Within Reach
HOW TO ORDER:
USBC-002
p.828.323.8914 f.828.323.8410
50
BOOM HOLSTER WITH STRAPS
p.828.323.8914 f.828.323.8410
51
Cleaning Supplies
Cloth & Wipes
Cleaning Supplies
BLUE STRIPE® Hot Stick Wax
BLUE STRIPE® Cloth
USTS-SILCLOTH
USTS-WAX
Size: 18” x 18” (approximately)
14 oz. cans
Microfiber silicone impregnated hot stick
wiping cloth.
Our high grade Carnauba wax creates a high
temperature, water resistant durable finish on
fiberglass, gelcoat, painted metal and wood
surfaces.
Our unique microfiber material both contains more
silicone and traps more dirt, dust and debris.
Our cloth comes with a durable clear bag that is
resealable.
OSHA Requires Daily
Inspection & Wiping of
Hot Sticks.
The BLUE STRIPE® Cloth imparts a clear
protective film of silicone on a hot stick. It complies with the OSHA requirement of
daily inspection and wiping of high voltage rated fiberglass hot sticks.
Create a High Temp, Water
A good coat of Carnauba wax on any
Resistant Finish
fiberglass product is recommended on a
routine basis. Carnauba wax inherently repels water and dirt to optimize dielectric
properties. Stay OSHA compliant and extend the life of your hot stick with our BLUE
STRIPE® Hot Stick Wax.
BLUE STRIPE® General Purpose Cleaner
BLUE STRIPE® Wipes
USTS-CLEANER
USTS-SILWIPE
1 US Gallon as mixed
Size: 8” x 12” Towel
We have created a specially formulated neutral
cleaner for tools, trucks, fiberglass, painted
surfaces, rubber goods and most any nonabsorbing surface.
Our daily hot sticks wipes are premoistened with silicone to leave
behind a thin protective water
repellent surface.
Perform a light cleaning and leave
a thin layer of silicone on your hot stick every day to
comply with OSHA requirements of daily inspection
and wiping of high voltage rated fiberglass hot sticks.
Our BLUE STRIPE® Wipes come in our convenient
dispenser box of 50 to mount on a wall.
HOW TO ORDER:
Convenient
Dispenser
Box Can
Be Wall
Mounted.
Freight Saving Ships Concentrated
HOW TO ORDER:
USTS-CLOTH
BLUE STRIPE® CLOTH
USTS-WAX
BLUE STRIPE® HOT STICK WAX - 14oz CAN
USTS-SILWIPE
BLUE STRIPE® WIPES (BOX OF 50)
USTS-CLEANER
BLUE STRIPE® GENERAL PURPOSE CLEANER 1 Gallon as mixed
p.828.323.8914 f.828.323.8410
52
Wax & Cleaner
p.828.323.8914 f.828.323.8410
53
Metering Products
Meter Grabber
56
57
58
Meter Grabber
Metering Products
USMG
Meter Grabber
Metering Products
Jumper Leads
USMG
Product Dimensions: 6.8 “ dia. x 15.5 “
Product weight: 2 lb 6 oz
Color: Clear with water cooler blue tint
USJL-001/002
The Utility Solutions Meter Grabber is an indispensable
tool for electric meter installation, removal or changeouts. The Meter Grabber provides superior protection
from exploding meters due to faults.
Our Electric Meter Jumper Lead sets are
a convenient and safe method to prevent a
customer outage during a meter removal or
change-out. They are constructed from #6 AWG
highly flexible insulated copper.
Operator protection is paramount therefore the Meter
Grabber has no metal components about the tools
working end. Side slots permit venting during a fault.
The working end of the tool provides a positive capture
around the entire base, eliminating the chance of a
dropped or broken meter as well as offering additional
mechanical leverage when removing stubborn meters.
USJL-002
Leads are available with a 100 AMP breaker
option (USJL-002). The resettable single
pole 240 volt hydraulic breaker allows for
added safety and protection of property.
Ferrule End
Safely Install and Remove
ALL Electric Meters
Shown with optional arc shield for
additional operator safety. (USMG-002)
Optional carrying bag is
constructed of heavyduty water resistant
fabric with a polymeric
base.
Optional carrying bag is
constructed of heavy-duty
water resistant fabric with
a polymeric base.
HOW TO ORDER:
HOW TO ORDER:
USMG-001
METER GRABBER
USJL-001
USMG-002
WITH ARC SHIELD RINGS
ELECTRIC METER JUMPER LEADS - FERRULE
END (SET OF TWO)
USMG-001-BAG
CARRYING BAG FOR USMG-001
USJL-002
ELECTRIC METER JUMPER LEADS - FERRULE
END WITH 100 AMP BREAKER (SET OF TWO)
USMG-002-BAG
CARRYING BAG FOR USMG-002
USMG-001-BAG
CARRYING BAG FOR USJL-001
p.828.323.8914 f.828.323.8410
USJL-001
The ferrule ends are machined of solid
copper for utmost performance and beveled
for easy push on installation. Simply push
the meter lead end over the bypass horn
and turn the knurled handle until the lead is
tightly secured in place.
Molded of a rugged polymer the tool is rugged, lightweight
and tinted to allow the operator to visually observe the
entire operation.
56
USJL
p.828.323.8914 f.828.323.8410
57
Metering Products
USJL
Safety & Training
USJL-005 & 006
The Low Voltage Bypass Tool
can be used as a portable switch
to pick-up and drop secondary
loads between a transformer
and an electric meter. Includes
#6 AWG highly flexible insulated
copper cable with solid copper
ferrule ends.
Load-Trainer‌
60
Grounds Tester
62
63
The resettable single pole 240 volt hydraulic breaker allows for safe load pick-up and
load break operations. The Low Voltage Bypass Tool can be used to bypass liquid
fuse holders that cannot be opened under load, as well as pick-up or drop load over
secondary isolators.
Used with standard utility approved secondary cable connectors.
Optional
Carrying Bag
HOW TO ORDER:
USJL-005
LOW VOLTAGE BYPASS TOOL - 100 AMP
USJL-006
LOW VOLTAGE BYPASS TOOL - 200 AMP
USMG-001-BAG
CARRYING BAG FOR USJL-005 or USJL-006
p.828.323.8914 f.828.323.8410
58
Safety & Training
Load-Trainer‌
XFMR
Load-Trainer‌
Safety & Training
XFMR
FLEXIBLE
Load-Trainer‌
TRAINING
The Load-Trainer‌is a
fully functional electrical
trainer that allows for the
simulation of most distribution transformer connection schemes. This
makes the Load-Trainer‌
a valuable addition to
any safety and training
program.
There are two Load-Trainer‌models. The XFMR-3BUSHING simulates
low side voltage three bushing transformers. The XFMR-4BUSHING
simulates low side voltage four bushing transformers. The XFMR-PRL
option supplies an additional front panel that acts as a slave unit to the
standard front panel.
Note: 3BUSHING design does NOT permit open primary or open secondary simulation, only the 4BUSHING design.
The Load-Trainer‌transformer simulator and trainer is wheel portable,
compact and easily transported. The unit is powered using a conventional 110 VAC power outlet.
Training = Safety.
The Load-Trainer‌transformer trainer & simulator has the capability to connect single-phase
and the following types of three-phase transformers:
•
•
•
•
•
•
Delta-Delta
Delta-Wye
Open Delta-Open Delta
Wye-Delta
Wye-Wye
Wye (one leg out)-Open Delta
SIMULATION
Hidden toggle switches can
be manipulated to introduce
common infield problems at
the time of installation or after the installation has been
performed. Some of these
include:
•Low voltage bushing hookups
•Polarity
•Back-feed
•High side phasing
•Open primary
•Open secondary
60
XFMR-3BUSHING
LOAD-TRAINER‌THREE BUSHING TRANSFORMER SIMULATOR
XFMR-4BUSHING
LOAD-TRAINER‌FOUR BUSHING TRANSFORMER SIMULATOR
XFMR-PRM
PHASE ROTATION METER
XFMR-LEADS
ASSORTMENT OF EXTRA BANANA LEADS
XFMR-3BUSHING-PRL
ADDITIONAL THREE BUSHING FRONT PANEL
XFMR-4BUSHING-PRL
ADDITIONAL FOUR BUSHING FRONT PANEL
HOW TO ORDER:
See Chart Above
p.828.323.8914 f.828.323.8410
61
Grounds Tester
Safety & Training
USGT
Grounds Tester
Safety & Training
Demonstration Trailers
Isolates Failure
Location
Utility Solutions tool demonstration trailers
provide an excellent means to evaluate
hot line tools in a hands on setting. Utility
Solutions periodically upgrades each
of our trailers to reflect our constantly
growing array of products. Additionally
our USGT-600 Grounds Tester and XFMR
Load Trainer Transformer Simulator are
fully functional (requires a 110 VAC power
supply).
USGT-600
Product Dimension: 20 “ x 15 “ x 7.5 “
Product Weight: 45 lbs
The USGT-600 Grounds Tester provides
a straightforward means of evaluating in
service grounding assemblies in compliance
with ASTM standards. A built in voltmeter
allows the operator to determine pass/
fail criteria of various lengths of cable
sizes #2 through double 4/0.
REACH Technology saves time and
eliminates guess work by troubleshooting
failed grounding assemblies and isolating
the failure location.
The USGT-600 Grounds Tester requires
a
120 Volt power supply.
The device is contained
in a rugged case and
ships with both brass
ball stud and brass flat
head electrodes.
Trailers are located about the United
States and Canada. Call your local sales
representative to schedule a trailer visit at
your earliest convenience.
ACCESSORY ADAPTERS
Accessory adapters allow for the
testing of assemblies with 15kV or
27kV load break elbow terminations,
15kV or 27kV bushing terminations
and a 3 1/8” OD adapter for testing
substation clamps.
USI currently has 8 trailers throughout
North America. Check our website for
details.
15 kV ELBOW
USGT-600-15KVELBOW
27 kV ELBOW
USGT-600-27KVELBOW
15 kV BUSHING
USGT-600-15KVBUSHING
27 kV BUSHING
SUBSTATION CLAMP
ADAPTER
Hands on Demos
Right in Your Parking Lot
Call your Rep for a Demo
HOW TO ORDER:
HOW TO ORDER:
USGT-600
GROUNDS TESTER
USGT-600-15KVELBOW
15 kV LOAD BREAK ELBOW ADAPTER(FEMALE)
15 kV LOAD BREAK BUSHING ADAPTER(MALE)
USGT-600-27KVELBOW
27 kV LOAD BREAK ELBOW ADAPTER (FEMALE)
27 kV LOAD BREAK BUSHING ADAPTER(MALE)
USGT-600-SUB
3 1/8” OD SUBSTATION CLAMP ADAPTER
62
TRAILER
TRAILER
p.828.323.8914 f.828.323.8410
CALL YOUR REPRESENTATIVE
p.828.323.8914 f.828.323.8410
63
Rubber Goods
66
Blanket Clamp
67
Blanket Buttons
67
Klondike Clamp
68
Blanket Mate Heavy Duty Blanket
Holder
69
Jumper Hook
70
Jumper-Aid™
71
72
Rubber Blankets
Rubber Goods
USRB
Tested by NAIL
Approved
Laboratory
USRB
Blanket Clamps & Buttons
Rubber Goods
Blanket Clamp
USBA-001
USBA-001/002
Utility Solutions blankets meet or exceed all applicable ASTM D-1048 performance
criteria. All blankets are Type II, manufactured from EDPM to provide maximum
resistance to ozone damage. All blankets are Style A and free from any internal
reinforcement for maximum flexibility. Utility Solutions blankets are molded in high
visibility yellow color and every blanket is tested at an independent NAIL certified
laboratory to assure highest quality.
EVERY blanket is tested and date stamped prior to shipping.
USBA
USBA-002
Product Dimensions: 10 “ x 5 “ x .75 “
USBA-001
Hand operable Blanket Clamp.
USBA-002
Blanket Clamp designed for remote operation using a shotgun stick.
Blanket Buttons
USBA-003
CLASS
SIZE
DESIGN
NO.
EYES
EYE
DIAMETER
WEIGHT
4
36” X 36”
solid
6
.375”
8 lb 4 oz
USRB-36-28-SLT
4
36” X 36”
slotted
28
.375”
8 lb 4 oz
USRB-22-28-SLT
4
22” x 22”
slotted
28
.375”
2 lb 8 oz
USRB-36-6-SLD
Product Dimensions: 1“ dia. .75”
Standard push button for installation
of blankets that incorporate perimeter
holes.
HOW TO ORDER:
HOW TO ORDER:
USRB-36-6-SLD
36” INSULATED RUBBER BLANKET - SOLID
USBA-001
BLANKET CLAMP - BOX OF 10
USRB-36-28-SLT
36” INSULATED RUBBER BLANKET - SLOTTED
USBA-002
BLANKET CLAMP - STICK OPERABLE - BOX OF 10
USRB-22-28-SLT
22” INSULATED RUBBER BLANKET - SLOTTED
USBA-003
BLANKET BUTTONS - BOX OF 100
p.828.323.8914 f.828.323.8410
66
p.828.323.8914 f.828.323.8410
67
Rubber Goods
Klondike Clamp
USCP
Rubber Goods
Blanket Mate
USBM
Blanket Mate Heavy Duty Blanket Holder
Klondike Clamp
The Klondike Clamp safely and quickly
secures rubber blankets without causing
damage and eliminates the need for tie wrap,
bungee cords, Velcro® or tape.
STANDARD - USCP-001
Save Time
& Protect
Blankets
Find it Hard
to Position a
Blanket?
USBM-001/002
LARGE - USCP-002
The Klondike Clamp comes in 3 models:
• Standard - Great on cross arms, bushings, poles and even pad mount gear.
• Large - Easily fits Poles up to 20” diameter.
• Hands-Free - This model attaches to a shotgun stick and offer hands-free operation.
The Klondike Clamp is made from a tough weather
resistant polymer and assembled with stainless steel
hardware.
The Blanket Mate Heavy Duty Blanket Holders solve the problem of safely and
securely positioning a rubber insulating blanket. The tear drop shaped ends easily
slide through the molded holes on a blanket. The strong, nearly indestructible
Blanket Mate is quick and easy and protects both equipment and blankets.
Electrical insulating blankets come in many sizes and can weigh as much as 9 lbs.
Choose from the USBM-001 6 magnet Blanket Mate or the USBM-002 8 magnet
Blanket Mate, depending on what size blanket you need to secure.
All magnetic Blanket Mates are designed to conform to curved surfaces typically
found on overhead apparatus and are manufactured from a unique polymer that
remains strong and flexible
even in cold weather.
This product comes with a
5 year unlimited warranty
against breakage.
HANDS-FREE - USCP-004
HOW TO ORDER:
HOW TO ORDER:
USCP-001
6”-11” DIA. KLONDIKE CLAMP
USCP-002
11”-20” DIA. KLONDIKE CLAMP
USCP-003
6”-11” DIA. KLONDIKE CLAMP / SINGLE SPRING
MECHANISM
USCP-004
6”-11” DIA. HANDS-FREE KLONDIKE CLAMP
68
p.828.323.8914 f.828.323.8410
USBM-001
BLANKET MATE - 6 MAGNET
USBM-002
BLANKET MATE - 8 MAGNET
p.828.323.8914 f.828.323.8410
69
Rubber Goods
Jumper Hook
USJH
Jumper Hook
Rubber Goods
Jumper-Aid™
USJH
Jumper-Aid™
Eliminate Jumper
Lead Sag
USJH-002
Product Dimensions: 14” x 10” x 1”
The patented USJH-002 Jumper-Aid™ is designed
to
support
a
jumper wire during
construction,
maintenance,
or repairs. It is
particularly useful
when a jumper is required to be in the vicinity of a
conductor of a different voltage/phase. The USJH-002
allows for the mechanical jumper and or conductor to
be supported while wrapped in an insulating rubber
blanket and or line hose while eliminating the need
for rope or tape. The pivoting nature of the USJH-002
offers positive locking about the jumper/conductor.
The USJH-002 is also a useful tool to prevent jumper
“sag” about a cross arm.
USJH-001
Product Dimensions:
11” x 4.5” x .5”
The Jumper Hook is
designed to eliminate
jumper clamp sag and
prevent potential cross-phasing situations without the
time consuming use of tape, bungee cords or rope.
The Jumper Hook also minimizes a jumper clamp
swaying in high wind conditions.
Simply hang multiple Jumper Hook units along the intended jumper clamp path and
let the tool cradle the jumper clamp. The Jumper Hook installs easily with a gloved
hand or shotgun stick. It will fit over any class 2 or 3 line hose and exhibits a flashover resistance of
over 50 kV.
The Jumper Hook
is made of a high
visibility polymer
material that can
handle the rigors of
daily use even in
cold temperatures.
HOW TO ORDER:
HOW TO ORDER:
USJH-001
USJH-002
JUMPER HOOK (6 per pack)
p.828.323.8914 f.828.323.8410
70
JUMPER-AID™
p.828.323.8914 f.828.323.8410
71
Bucket Mate
Rubber Goods
USBM
USBM-004
USBM-004-W
Appendix
1½”
USBM-004/004-W
Product Dimensions: 6.5” x 6.5” x .5”
75 lb Weight Rating
Unlike conventional molded bucket hooks, the Bucket Mate is machined from high
performance polymer and far more rugged than traditional PVC. Nearly indestructible
even in cold temperatures and rated at 75 lbs.
74
77
83
89
92
Standard Terms and Conditions
95
Index
97
The Bucket Mate is double ended allowing the large hook to accept a tool bag, while
the opposing smaller ½” end will accept blanket holes without damaging the blanket.
Designate USBM-004-W
to specify the wider slot
Bucket Mate that can
accommodate the next
generation
of
thicker
insulated buckets.
This product comes with a
5 year unlimited warranty
against breakage.
HOW TO ORDER:
USBM-004
BUCKET MATE POLYMERIC HOOK
USBM-004-W
WIDE SLOT BUCKET MATE POLYMERIC HOOK
p.828.323.8914 f.828.323.8410
72
LOAD-RANGER® XLT PARTS GUIDE
Appendix
Appendix
USLR-XLT-1 (and P models)
USLR-XLT-2 (and P models)
C-00520 XLT-1 LONG ONDUCTOR
PATH
C-00524 XLT END CAP (MOLDED)
C-00528 XLT-1 SPACER
C-00539 XLT EXTENDED HOOD
C-00541 XLT-2 LONG CONDUCTOR
PATH
C-00554 XLT ARC SNUFFER
C-00558 XLT-2 SPACER
P-00043 XLT HOOK LOOP ASSEMBLY
P-00484 USLR-XLT Fastener / Repair Kit
Includes C-01080 Slit “O” Ring & LOCTITE 263
B-01030 DEOXIT L260AP MECHANICAL
& ELECTRICAL GREASE
C-00497 XLT GUIDE PIN
C-00498 XLT THREADED PIN PLUG
C-00507 XLT STOP BAR
C-00509 XLT ARC SHIM
C-00513 XLT EXTERNAL GASKET
P-00044 XLT MUFFLER CAP
ASSEMBLY
C-00517 XLT FEMALE CONTACT
74
P-00048 XLT-1 YELLOW TUBE
ASSEMBLY
C-00519 XLT SHORT CONDUCTOR
PATH
75
Appendix
BREAK-SAFE® PARTS GUIDE
Appendix
USBS-15-1-PS (GEN 2)
P-00049 XLT-1 PROBE SHAFT
ASSEMBLY
P-00055 XLT PADMOUNT ARM
ASSEMBLY
P-00325 XLT COUNTER ASSEMBLY
P-00449 XLT-2 PROBE SHAFT
ASSEMBLY
76
P-00052 XLT OVERHEAD ARM
ASSEMBLY
P-00404 BS REPAIR FASTENER KIT
(2ND GEN)
Includes P-00945 BS CONDUCTING
COIL & LOCTITE 263
B-00119 COMPRESSION SPRING 6.000”
X 1.335” X 0.091”
B-00159 KEARNEY FIBERGLASS
CLEANER/WAX
B-00593 CYLINDRICAL COMPRESSION
SPRING - .81”
B-00970 USBS 2YR MAINTENANCE
LABEL
& ELECTRICAL GREASE
C-01206 USBS 2ND GEN PULL RING
C-01209 BS INTERNAL FEMALE
CONTACT
C-01211 BS CONTACT FOLLOWER
C-01215 BS ARC SHIELD
C-01216 BS/15 SHORT ARC TUBE
C-01262 BS ARC TUBE
P-00323 XLT-1 BLACK TUB / CAN
ASSEMBLY
P-00447 XLT-2 YELLOW TUBE
ASSEMBLY
P-00452 XLT-2 BLACK TUB / CAN
ASSEMBLY
77
Appendix
Appendix
P-00247 BS/15 PROBE SHAFT
ASSEMBLY
P-00249 BS/15 YELLOW TUBE W/ TRIGGER
ASSEMBLY
P-00250 BS/15 SLIDING CONTACT
ASSEMBLY
P-00251 BS/15-1 FLOATING HEAD MAIN
BODY ASSEMBLY
P-00256 PICKUP TRIGGER ASSEMBLY
P-00261 FLOATING HEAD ASSEMBLY
P-00263 BS/15-2 DUCKBILL HEAD MAIN
BODY ASSEMBLY
P-00267 BS BASE ASSEMBLY
P-00271 DUCKBILL CLAMP W/
ATTACHED CONNECTOR ROD
P-00314 SAFETY LOCK ASSEMBLY
P-00408 BS/15-1 FLOATING HEAD
P-00409 BS/15-2 DUCKBILL HEAD
CLEAR TUBE ASSEMBLY w/ ATTACHED CLEAR TUBE ASSEMBLY w/ ATTACHED
LABELS
LABELS
78
(2ND GEN)
COIL & LOCTITE 263
SPRING - 11”
CLEANER/WAX
SPRING - .81”
LABEL
& ELECTRICAL GREASE
CONTACT
C-01215 BS ARC SHIELD
79
Appendix
Appendix
C-01262 BS ARC TUBE
ASSEMBLY
ASSEMBLY
ASSEMBLY
BODY ASSEMBLY
CLEAR TUBE ASSEMBLY w/
ATTACHED LABELS
80
BODY ASSEMBLY
(2ND GEN)
COIL & LOCTITE 263
CLEANER/WAX
B-00593 CYLINDRICAL COMPRESSION B-00917 CYLINDRICAL COMPRESSION
SPRING - 16”
SPRING - .81”
LABEL
& ELECTRICAL GREASE
C-00087 LIFESAVER CONTACT SHIM
CONTACT
ATTACHED LABELS
C-01260 BS/46 SPACER
81
Appendix
TELESCOPIC HOT STICKS PARTS GUIDE
Appendix
USTS-004 THRU USTS-050
C-01262 BS ARC TUBE
#9
#8
#7
#6
#5
#4
#3
#2
#1
Inside Sections
Bucket Operable Fiberglass Sections
SECTION #
USTS-004
USTS-006
USTS-008
USTS-010
USTS-012
4’
6’
8’
10’
12’
#1
C-00836
#2
C-00837
#3 INSIDE
#3 OUTSIDE
C-00838
C-00839
#4 INSIDE
C-00840
#4 OUTSIDE
C-00841
#5 INSIDE
C-00842
#5 OUTSIDE
C-00843
#6 INSIDE
C-00844
#6 OUTSIDE
C-00845
#7 OUTSIDE
ASSEMBLY
SECTION #
USTS-016
USTS-020
USTS-025
USTS-030
USTS-035
USTS-040
USTS-045
USTS-050
16’
20’
25’
30’
35’
40’
45’
50’
#1 TIPLOCK
C-00610
#1 NON TIPLOCK
C-01270
#2
C-00620
#3
C-00630
C-00640
C-00641
#5 INSIDE
#5 OUTSIDE
C-00650
C-00651
#6 INSIDE
#6 OUTSIDE
C-00660
C-00661
#7 INSIDE
BODY ASSEMBLY
CLEAR TUBE ASSEMBLY w/ ATTACHED
LABELS
C-00670
#7 OUTSIDE
C-00671
#7 OUTSIDE w/BOOT
C-01140
#8 INSIDE
C-00680
#8 OUTSIDE
C-00681
#8 OUTSIDE w/BOOT
C-01139
#9 INSIDE
ATTACHED LABELS
82
C-00690
#9 OUTSIDE
C-00691
#9 OUTSIDE w/BOOT
C-01138
#10 INSIDE
C-00700
#10 OUTSIDE
C-00701
#10 OUTSIDE w/BOOT
C-01137
#11 OUTSIDE
Tip-Lock
#4 OUTSIDE
NON Tip-Lock
#4 INSIDE
Section #1
BODY ASSEMBLY
Ground Operable Fiberglass Sections
Section #1
ASSEMBLY
ASSEMBLY
C-00846
C-00710
83
84
C-00610-020-EM
C-00610-016-EM
C-00620-016-EM
C-00630-016-EM
#1
#2
#3
C-00651
C-00640-020-EM
C-00630-020-EM
C-00661
C-00650-025-EM
C-00641-025-EM
C-00640-025-EM
C-00630-025-EM
C-00620-025-EM
C-00610-025-EM
25’
USTS-025
C-00610-020-MM
C-00610-016-MM
C-00620-016-MM
C-00630-016-MM
#1
#2
#3
#11 OUTSIDE
#10 OUTSIDE
#10 INSIDE
#9 OUTSIDE
#9 INSIDE
#8 OUTSIDE
#8 INSIDE
#7 OUTSIDE
#7 INSIDE
#6 OUTSIDE
#6 INSIDE
#5 OUTSIDE
C-00651
C-00640-020-MM
C-00630-020-MM
C-00661
C-00650-025-MM
C-00641-025-MM
C-00640-025-MM
C-00630-025-MM
C-00620-025-MM
C-00610-025-MM
25’
USTS-025
C-00671
C-00660-030-MM
C-00651-030-MM
C-00650-030-MM
C-00641-030-MM
C-00640-030-MM
C-00630-030-MM
C-00620-030-MM
C-00610-030-MM
30’
USTS-030
C-00681
C-00670-035-MM
C-00661-035-MM
C-00660-035-MM
C-00651-035-MM
C-00650-035-MM
C-00641-035-MM
C-00640-035-MM
C-00630-035-MM
C-00620-035-MM
C-00610-035-MM
35’
USTS-035
C-00681
C-00670-035-EM
C-00661-035-EM
C-00660-035-EM
C-00651-035-EM
C-00650-035-EM
C-00641-035-EM
C-00640-035-EM
C-00630-035-EM
C-00620-035-EM
C-00610-035-EM
35’
USTS-035
C-00691
C-00680-040-MM
C-00671-040-MM
C-00670-040-MM
C-00661-040-MM
C-00660-040-MM
C-00651-040-MM
C-00650-040-MM
C-00641-040-MM
C-00640-040-MM
C-00630-040-MM
C-00620-040-MM
C-00610-040-MM
40’
USTS-040
C-00691
C-00680-040-EM
C-00671-040-EM
C-00670-040-EM
C-00661-040-EM
C-00660-040-EM
C-00651-040-EM
C-00650-040-EM
C-00641-040-EM
C-00640-040-EM
C-00630-040-EM
C-00620-040-EM
C-00610-040-EM
40’
USTS-040
C-00701
C-00690-045-MM
C-00681-045-MM
C-00680-045-MM
C-00671-045-MM
C-00670-045-MM
C-00661-045-MM
C-00660-045-MM
C-00651-045-MM
C-00650-045-MM
C-00641-045-MM
C-00640-045-MM
C-00630-045-MM
C-00620-045-MM
C-00610-045-MM
45’
USTS-045
C-00701
C-00690-045-EM
C-00681-045-EM
C-00680-045-EM
C-00671-045-EM
C-00670-045-EM
C-00661-045-EM
C-00660-045-EM
C-00651-045-EM
C-00650-045-EM
C-00641-045-EM
C-00640-045-EM
C-00630-045-EM
C-00620-045-EM
C-00610-045-EM
45’
USTS-045
C-00710
C-00700-050-MM
C-00691-050-MM
C-00690-050-MM
C-00681-050-MM
C-00680-050-MM
C-00671-050-MM
C-00670-050-MM
C-00661-050-MM
C-00660-050-MM
C-00651-050-MM
C-00650-050-MM
C-00641-050-MM
C-00640-050-MM
C-00630-050-MM
C-00620-050-MM
C-00610-050-MM
50’
USTS-050
C-00710
C-00700-050-EM
C-00691-050-EM
C-00690-050-EM
C-00681-050-EM
C-00680-050-EM
C-00671-050-EM
C-00670-050-EM
C-00661-050-EM
C-00660-050-EM
C-00651-050-EM
C-00650-050-EM
C-00641-050-EM
C-00640-050-EM
C-00630-050-EM
C-00620-050-EM
C-00610-050-EM
50’
USTS-050
Appendix
#5 INSIDE
#4 OUTSIDE
#4 INSIDE
C-00641
20’
16’
C-00620-020-MM
USTS-020
USTS-016
SECTION #
C-00671
C-00660-030-EM
C-00651-030-EM
C-00650-030-EM
C-00641-030-EM
C-00640-030-EM
C-00630-030-EM
C-00620-030-EM
C-00610-030-EM
30’
USTS-030
Metric Measuring Fiberglass Sections
#11 OUTSIDE
#10 OUTSIDE
#10 INSIDE
#9 OUTSIDE
#9 INSIDE
#8 OUTSIDE
#8 INSIDE
#7 OUTSIDE
#7 INSIDE
#6 OUTSIDE
#6 INSIDE
#5 OUTSIDE
#5 INSIDE
#4 OUTSIDE
#4 INSIDE
C-00641
20’
C-00620-020-EM
USTS-020
16’
SECTION #
USTS-016
English Measuring Fiberglass Sections
NOTE: Measuring Stick Sections are unique for each size stick!
Appendix
85
Appendix
PLUGS, BUTTONS, AND SPRINGS
Plug & Button Assembly
(Includes Plug, Spring, Button, Spring Caps, and
Fasteners)
Button & Spring Kit
(Includes Spring, Button, and Spring Caps)
SECTION #
PART #
Appendix
FITS
# of
SPRING
CAPS
SECTION #
COMPLETE Button & Spring Kit
(Includes all necessary Plugs, Springs,
Buttons, Spring Caps, and Fasteners)
FOR STICK
PART #
PART #
FITS
#1 TIPLOCK BUTTON
P-00127
USTS-004
USTS-004-BUTTON-KIT
#1
P-00128
USTS-006
USTS-006-BUTTON-KIT
#2
P-00129
USTS-008
USTS-008-BUTTON-KIT
#1 TIPLOCK BUTTON
P-00157
0
#1
P-00147
0
#2
P-00148
1
#3 INSIDE
P-00130
USTS-010
USTS-010-BUTTON-KIT
#3 INSIDE
P-00149
1
#4 INSIDE
P-00131
USTS-012
USTS-012-BUTTON-KIT
#4 INSIDE
P-00150
1
#5 INSIDE
P-00132
USTS-016
USTS-016-BUTTON-KIT*
#5 INSIDE
P-00151
1
#6 INSIDE
P-00133
USTS-020
#6 INSIDE
P-00152
1
#7 INSIDE
P-00134
USTS-025
#7 INSIDE
P-00153
2
#8 INSIDE
P-00135
USTS-030
#8 INSIDE
P-00154
3
#9 INSIDE
P-00136
USTS-035
#9 INSIDE
P-00155
4
#10 INSIDE
P-00137
USTS-040
#10 INSIDE
P-00156
5
USTS-045
USTS-050
Spring
Spring Cap
Button
Plug & Button Assembly
* includes Tiplock Button & Spring
Heavy Duty Substation Sticks Sections*
SECTION #
USTS-H02-DH
#1 INSIDE
#2 INSIDE
*
USTS-H03-DH
USTS-HO2-SE
P-00481
P-00186
#2 OUTSIDE
P-00185
#2 OUTSIDE w/ BOOT
P-00223
USTS-HO3-SE
USTS-HO2-QC
P-00480
USTS-HO3-QC
P-00184
P-00186
P-00185
P-00186
P-00185
P-00223
Tip-Lock Button & Spring Kit (P-00127)
(includes Roll Pin, 3/8”-16 Hex Head Removal Tool, Button, and Spring)
P-00223
#3 OUTSIDE
P-00187
P-00187
P-00187
#3 OUTSIDE w/ BOOT
P-00205
P-00205
P-00205
Substation Stick sections include end caps, end fitings and come assembled. See “Complete Button & Spring
Kit” for buttons.
86
87
Appendix
END CAPS, BOOTS, SPLINE END, AND BANDS
Appendix
SHOTGUN STICKS PARTS GUIDE
USSG-004 THRU USSG-010
End Cap Assembly (includes fasteners)
Rubber Boot (includes fasteners)
FOR STICK
PART #
USTS-004
P-00158
USTS-016
P-00224
USTS-006
P-00159
USTS-020
P-00225
USTS-008
P-00160
USTS-025
P-00226
USTS-010
P-00161
USTS-030
P-00227
USTS-012
P-00162
USTS-035
P-00228
USTS-016
P-00159
USTS-040
P-00229
USTS-020
P-00160
USTS-045
P-00230
USTS-025
P-00161
USTS-030
P-00162
USTS-035
P-00163
USTS-040
P-00164
USTS-045
P-00165
USTS-050
P-00166
FOR STICK
PART #
B-00302 5/16”-18 X 1-1/2” FULL THREAD
STUD (INTERNAL ROD ONLY)
B-00551 10-24 X 1/4 FLAT HEAD
MACHINE SCREW
C-00320 SHOTGUN HOOK
C-00321 RACK STOP
Spline End
ITEM
PART #
FITS
USTS SPLINE END ASSEMBLY w/
FASTENER
P-00045
THUMB SCREW w/ CAPTIVEWASHER
B-00105
C-00456 INTERNAL ROD MACHINED SLOT COVER CLEAR
Protective Silicone Band
FOR STICK
PART #
USTS-016
B-01040
USTS-020
B-01041
USTS-025
B-01042
USTS-030
B-01043
USTS-035
B-01044
USTS-040
B-01045
USTS-045
B-01046
USTS-050
B-01047
88
89
SHOTGUN STICKS PARTS GUIDE
Appendix
P-00168 SHOTGUN HANDLE ASSEMBLY
P-00181 INTERNAL ROD HANDLE
CONNECTOR
USSA-HGR PLASTISOL HANGER &
CLAMP
OPERATING ROD ASSEMBLY
FOR STICK
EXTERNAL ROD
PART #
USSG-004-ER**
P-00169
USSG-008-ER**
P-00171
USSG-006-ER**
USSG-010-ER**
INTERNAL ROD
P-00170
P-00172
USSG-004-IR**
P-00173
USSG-008-IR**
P-00175
USSG-006-IR**
USSG-010-IR**
P-00174
P-00176
INTERNAL ROD W/ BOTTOM BREAK HOOK
USSG-004-IR**-BBH
P-00177
USSG-008-IR**-BBH
P-00179
USSG-006-IR**-BBH
USSG-010-IR**-BBH
90
P-00178
P-00180
ALABAMA
UTILITY-SPECIALISTS INC.
3908 CYPRESS DRIVE
BIRMINGHAM, AL 35243
(205) 967-4602
FAX: (205) 967-4673
www.utility-specialists.com
CALIFORNIA – SOUTH
M.A. HANSON & SON, LLC
409 BEVERLY DRIVE
REDLANDS, CA 92373
(909) 593-7109
FAX: (909) 593-9311
www.mahanson.com
DELAWARE
J.B. SALES COMPANY
7957 INDUSTRIAL PARK ROAD
EASTON, MD 21601
(410) 822-9611
FAX: (410) 822-8358
www.jbsales.com
ALASKA
HEES ENTERPRISES
#1 12TH STREET, SUITE #15
ASTORIA, OR 97103
(503) 325-8778
FAX: (503) 325-2467
www.heesenterprises.com
CANADA
ALBERTA, BRITISH COLUMBIA,
MANITOBA, SASKATCHEWAN AND
MARITIME PROVINCES
LINESTAR UTILITY SUPPLY, INC.
1103 KEEWATIN STREET
WINNIPEG, MB R2X 2Z3
(204)783-9771
www.linestar.ca
DISTRICT OF COLUMBIA
J.B. SALES COMPANY
EASTON, MD 21601
(410) 822-9611
FAX: (410) 822-8358
www.jbsales.com
ARIZONA
SOURCEWEST ELECTRICAL SALES
PO BOX 13080
CHANDLER, AZ 85249
(480) 699-9013
Fax: (480) 699-9014
www.sourcewestsales.com
CANADA – ONTARIO
PEFCO ONTARIO
1734 FINCH AVENUE
PICKERING, ON L1V 1K4
(905) 427-9294
FAX: (905) 427-0540
ARKANSAS
COLORADO
SOUTHERN UTILITY SALES AGENCY
VIKING UTILITY SALES, INC.
PO BOX 816
894 N. CASTLEWOOD CANYON RD
PASS CHRISTIAN, MS 39571-0816
FRANKTOWN, CO 80116
(228) 452-6235
(303) 660-6899
FAX (888) 492-9322
FAX: (303) 663-7366
www.susallc.com
www.viking-sales.com
CALIFORNIA -NORTH
CONNECTICUT
ISBERG-NOTT COMPANY
LVA SALES
4725 FIRST STREET #265
56 HARVESTER AVENUE
PLEASANTON, CA 94566
BATAVIA, NY 14020
(925) 426-4718
(585) 201-7040
FAX: (925) 426-0323
FAX: (585) 219-5859
www.isberg-nott.com
www.lvasales.com
FLORIDA
3908 CYPRESS DRIVE
(205) 967-4602
FAX: (205) 967-4673
GEORGIA
3908 CYPRESS DRIVE
(205) 967-4602
FAX: (205) 967-4673
HAWAII
M.A. HANSON & SON, LLC
409 BEVERLY DRIVE
REDLANDS, CA 92373
(909) 593-7109
FAX: (909) 593-9311
www.mahanson.com
91
UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORY
UNITED STATES
UNITED STATES
IDAHO
HEES ENTERPRISES
ASTORIA, OR 97103
(503) 325-8778
FAX: (503) 325-2467
KENTUCKY
POWERLINK ELECTRICAL SALES
30555 CLEMENS ROAD
WESTLAKE, OH 44145
(440) 899-0884
FAX: (440) 899-1185
www.yourpowerlink.com
MISSISSIPPI
PO BOX 816
(228) 452-6235
FAX (888) 492-9322
www.susallc.com
NEW HAMPSHIRE
LVA SALES
56 HARVESTER AVENUE
BATAVIA, NY 14020
(585) 201-7040
FAX: (585) 219-5859
www.lvasales.com
OKLAHOMA
JONES POWER PRODUCTS
3415 HUNTERS RIDGE
BLANCHARD, OK 73010
(405) 485-2019
FAX: (405) 485-3484
www.jonespowerproducts.com
ILLINOIS – NORTH
MIDWEST ELECT. RESOURCES
N109 ERIN ROAD
OCONOMOWOC, WI 53066
(920) 474-3504
FAX: (630) 778-9822
www.mwelecres.com
LOUISIANA
PO BOX 816
(228) 452-6235
FAX (888) 492-9322
www.susallc.com
MISSOURI
POWER EQUIPMENT SALES
1507 LAKE AVENUE
KANSAS CITY, KS 66103
(913) 384-3848
FAX: (913) 384-5097
www.powerequipsales.com
NEW JERSEY
ENSALES, INC.
140B EAST PARK DRIVE
BEULAVILLE, NC 28518
PHONE (910)298-3305
FAX (866)589-2099
www.ensales.com
OREGON
HEES ENTERPRISES
ASTORIA, OR 97103
(503) 325-8778
FAX: (503) 325-2467
ILLINOIS – SOUTH
1507 LAKE AVENUE
(913) 384-3848
FAX: (913) 384-5097
MAINE
LVA SALES
56 HARVESTER AVENUE
BATAVIA, NY 14020
(585) 201-7040
FAX: (585) 219-5859
www.lvasales.com
MONTANA -EAST
UTILITY SALES ASSOCIATES, INC.
930 E OAK STREET
LAKE IN THE HILLS, IL 60156
(800) 253-6248
FAX: (800) 459-8078
www.utilitysales.net
PENNSYLVANIA
ENSALES, INC.
140B EAST PARK DRIVE
BEULAVILLE, NC 28518
PHONE (910)298-3305
FAX (866)589-2099
www.ensales.com
INDIANA - LESS NORTHERN
CORNER
30555 CLEMENS ROAD
WESTLAKE, OH 44145
(440) 899-0884
FAX: (440) 899-1185
MARYLAND
J.B. SALES COMPANY
EASTON, MD 21601
(410) 822-9611
FAX: (410) 822-8358
www.jbsales.com
MONTANA - WEST
HEES ENTERPRISES
ASTORIA, OR 97103
(503) 325-8778
FAX: (503) 325-2467
NEW MEXICO
894 N. CASTLEWOOD CANYON
ROAD
FRANKTOWN, CO 80116
(303) 660-6899
FAX: (303) 663-7366
MASSACHUSETTS
LVA SALES
56 HARVESTER AVENUE
BATAVIA, NY 14020
(585) 201-7040
FAX: (585) 219-5859
www.lvasales.com
NEBRASKA
THE MCCASKEY COMPANY
5925 COUNCIL STREET, NE
SUITE #112
CEDAR RAPIDS, IA 52402
(319) 743-3730
FAX: (319) 743-3733
www.mccaskey-co.com
NORTH CAROLINA
POWERTECH, LLC
9004 YELLOW PINE COURT
Waxhaw, NC 28173
Phone (704) 843-7271
FAX (704)843-7283
www.powertechllc.com
NEVADA -NORTH
ISBERG-NOTT COMPANY
4725 FIRST STREET #265
PLEASANTON, CA 94566
(925) 426-4718
FAX: (925) 426-0323
www.isberg-nott.com
NORTH DAKOTA
930 E OAK STREET
(800) 253-6248
FAX: (800) 459-8078
INDIANA - NORTHERN CORNER
N109 ERIN ROAD
(920) 474-3500
FAX: (630) 778-9822
www.mwelecres.com
IOWA
SUITE 112
(319) 743-3730
FAX: (319) 743-3733
www.mccaskey-co.com
KANSAS
1507 LAKE AVENUE
(913) 384-3848
FAX: (913) 384-5097
92
MEXICO
MAYECEN S.A. DE C.V.
ANGEL GARCIA ABURTO NO. 364
COL. BALDERRAMA, C.P. 83180
HERMOSILLO SONORA, MEXICO
001 52 - (662) 260-2080 EXT. 113
FAX: 52- (662) 260-2035
www.mayecen.com
MICHIGAN
GAR-NET ASSOCIATES, INC.
4160 BRIARHILL DRIVE
MILAN, MI 48160
(734) 434-8868
FAX: (734) 434-5663
MINNESOTA
930 E OAK STREET
(800) 253-6248
FAX: (800) 459-8078
NEVADA -SOUTH
SOURCEWEST ELECTRICAL SALES,
PO BOX 13080
CHANDLER, AZ 85248
(480) 699-9013
Fax: (480) 699-9014
www.sourcewestsales.com
NEW YORK
LVA SALES
56 HARVESTER AVENUE
BATAVIA, NY 14020
(585) 201-7040
FAX: (585) 219-5859
www.lvasales.com
PUERTO RICO
J.L. FLORES, INC.
P.O. BOX 9719
CAGUAS, PR 00726
(787) 747-5906
FAX: (787) 747-4663
www.jlflorespr.com
RHODE ISLAND
LVA SALES
56 HARVESTER AVENUE
BATAVIA, NY 14020
(585) 201-7040
FAX: (585) 219-5859
www.lvasales.com
SOUTH CAROLINA
POWERTECH, LLC
Waxhaw, NC 28173
Phone (704) 843-7271
FAX (704)843-7283
SOUTH DAKOTA
OHIO
930 E OAK STREET
30555 CLEMENS ROAD
(800) 253-6248
WESTLAKE, OH 44145
FAX: (800) 459-8078
(440) 899-0884
FAX: (440) 899-1185
TENNESSEE – EAST 2/3
POWER SERVICE AGENCY
2509 JOYA DRIVE
NASHVILLE, TN 37214
(615) 885-6362
FAX: (615) 885-1261
www.powerserviceagency.com
TENNESSEE – WEST 1/3
PO BOX 816
(228) 452-6235
FAX (888) 492-9322
TEXAS
JONES POWER PRODUCTS
4804 SNOWS HILL COURT
ARGYLE, TX 76226
(405) 485-2019
FAX: (405) 485-3484
www.jonespowerproducts.com
UTAH
HEES ENTERPRISES
ASTORIA, OR 97103
(503) 325-8778
FAX: (503) 325-2467
VERMONT
LVA SALES
56 HARVESTER AVENUE
BATAVIA, NY 14020
(585) 201-7040
FAX: (585) 219-5859
www.lvasales.com
VIRGINIA
J.B. SALES COMPANY
EASTON, MD 21601
(410) 822-9611
FAX: (410) 822-8358
www.jbsales.com
WASHINGTON
HEES ENTERPRISES
ASTORIA, OR 97103
(503) 325-8778
FAX: (503) 325-2467
WEST VIRGINIA
POWERTECH, LLC
Waxhaw, NC 28173
Phone (704) 843-7271
FAX (704)843-7283
93
UNITED STATES
WISCONSIN
N109 ERIN ROAD
(920) 474-3504
FAX: (630) 778-9822
www.mwelecres.com
Standard Terms and Conditions of Sale
Standard Terms and Conditions
These terms and conditions govern the sale of products (“Product or Products) and provisions of services
(“Services”) by Utility Solutions Inc. (USI). These terms and conditions (“Agreement”) take precedence
Standard
Terms
andterms
Conditions
of notice
Sale
over Buyer’s supplemental
or conflicting
and conditions to which
of objection is hereby given.
Neither Seller’s commencement of performance or delivery shall be deemed or construed as acceptance of
Buyer’s supplemental or conflicting terms and conditions. USI’s failure to object to conflicting or additional
terms will not change or add to the terms of this agreement. Buyer’s acceptance of the Products and / or
Services from Seller shall be deemed to constitute acceptance of the terms and conditions contained herein.
1.
WYOMING – EAST
SUITE 112
(319) 743-3730
FAX: (319) 743-3733
www.mccaskey-co.com
2.
WYOMING -SOUTH
894 N. CASTLEWOOD CANYON
ROAD
FRANKTOWN, CO 80116
(303) 660-6899
FAX: (303) 663-7366
4.
3.
5.
6.
7.
Orders: All orders placed by Buyer are subject to acceptance by Seller. Orders may not be cancelled
or rescheduled without the Seller’s consent. All orders must identify the product, part number,
quantity, unit price, freight forwarder, contact information, Bill and Ship To information as well as
purchase order number, date and quotation reference if applicable. Seller may at its sole discretion
allocate Product among its customers.
Prices: The prices of the Products are those specified through price list or quotation. Pricing is subject
to change in the event of an increase in Seller’s cost, change in market conditions or any other causes
beyond Seller’s control. Price quotations shall automatically expire in thirty (30) days from date of
issue, or as otherwise stated in the quotation.
Taxes: Unless otherwise agreed to in writing by Seller, all prices quoted are exclusive of transportation
and insurance costs, duties, and all taxes including federal, state and local sales, excise and value
added, goods and services taxes, and any other taxes. Buyer agrees to indemnify and hold Seller
harmless for any liability for tax in connection with the sale, as well as the collection or withholding
thereof, including penalties and interest thereon.
Payment: Payment may be made by check, money order, credit card, or wire transfer (all fees are
borne by the buyer). Where Seller has extended credit to the Buyer, terms of payment shall be net
thirty (30) days from date of invoice. On any past due invoice, Seller may impose interest at the rate
of 1.5% per month. If Buyer fails to make each payment when it is due, Seller reserves the right to
change or withdraw credit and hereby suspend or cancel performance under any and all purchase
order agreements in which Seller has extended credit to the Buyer. In the event of default by Buyer,
Seller shall be entitled to costs, fees, and expenses, including but not limited to recover of attorney
fees, court costs and fees, and collection costs.
Delivery and Title: All deliveries shall be made “EXWORKS” place of shipment, unless otherwise
agreed upon. Title and risk of loss pass to the Buyer upon delivery of the Product to the carrier.
Seller’s delivery dates are estimates only and Seller is not liable for delays in delivery or for failure
to perform due to causes beyond the reasonable control of the Seller, nor shall carrier be deemed an
agent of the Seller. A delayed delivery of any part of an order does not entitle Buyer to cancel other
deliveries. Deliveries within four (4) weeks of scheduled date shall be considered firm and cannot be
modified without acceptance from the Seller.
Acceptance / Returns: Shipments will be deemed to have been accepted by the Buyer upon delivery
of the said shipments to the Buyer unless rejected upon receipt. Any discrepancy in shipment quantity
must be reported within 7 days after delivery. Buyer may not return Products without a return for
material authorization (RMA). RMA valid for 30 days from date issued. Any product returned by
Buyer due to Buyer’s error may be subject to a restocking change equivalent to 50% of the value
of such Product as specified in Sellers’s invoice to Buyer, and total returns shall not exceed 5% of
Buyers annual sales.
Limited Warranty: Seller warrants to Buyer that Products purchased hereunder will conform to the
manufacture’s specifications for such products and is warranted from material defect for a period of
one (1) year from the date of shipment. If Seller breaches this warranty, Buyer’s remedy is limited to
(at Seller’s election) (1) refund of Buyer’s purchase price for such production (without interest), (2)
repair of such Products, or (3) replacement of such Products; provided that such Products must be
returned to Seller, along with acceptable evidence of purchase No warranty will apply if the Product
as been subjected to misuse, neglect, accident or modification.
SAVE AS EXPRESSLY PROVIDED IN THESE TERMS AND CONDITIONS, ALL IMPLIED
WARRANTIES, TERMS AND CONDITIONS (WHETHER STATUTORY OR OTHERWISE)
ARE EXCLUDED TO THE FULLEST EXTENT PERMITTED BY LAW.
8.
94
Limitation of Liabilities: BUYER SHALL NOT BE ENTITLED TO, AND SELLER SHALL NOT
BE LIABLE FOR, LOSS OF PROFITS OR REVENUE, PROMOTIONAL OR MANUFACTURING
EXPENSES, OVERHEADS, BUSINESS INTERUPPTION COSTS, INJURY TO REPUTATION
OR LOSS OF BUYERS, PUNITIVE DAMAGES, LOSS OF CONTRACTS OR ORDERS OR
ANY INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE. BUYER’S RECOVERY FROM SELLER FOR ANY CLAIM SHALL NOT EXCEED
THE PURCHASE PRICE PAID FOR THE AFFECTED PRODUCTS IRRESPECTIVE OF THE
NATURE OF THE CLAIM WHETHER IN CONTRACT, TORT, WARRANTY OR OTHERWISE.
BUYER WILL INDEMNIFY, DEFEND AND HOLD SELLER HARMLESS FROM ANY CLAIMS
BASED ON (a) SELLERS COMPLIANCE WITH BUYER’S DESIGNS, SPECIFICATIONS, OR
INSTRUCTIONS, (b) MODIFICATION OF ANYH PRODUCTS BY ANYONE OTHER THAN
SELLER, OR (c) USE IN COMBINATION WITH OTHER PRODUCTS.
95
Index
Standard Terms and Conditions of Sale . . . continued
9.
10.
11.
12.
13.
Export Control: Buyer certifies that it will be the recipient of the Products to be delivered by the
Seller. Buyer acknowledges that the products are subject to the export/import control laws and
regulations of various countries, including the Export Administration Laws of the United States.
Products sold by the Seller cannot be transferred, sold or re-exported to any part on the Entity List
or Restricted Persons List of the U.S. Department of Commerce Bureau of Industry and Security,
any party designated by the U.S. Department of Treasury Department’s Office of Foreign Assets
Control, and any party debarred or sanctioned for proliferation of terrorism reasons by the U.S. State
Department.
Use of Products: Buyer agrees that Seller and manufacturer of the Products are not liable, in whole or
in part, for any claim. Buyer agrees to indemnify, defend and hold seller and manufacturer of Products
harmless from and against any and all claims, damages, losses, costs, expenses, and liabilities arising
out of or in connection with use or sale.
Force Majeure: Seller is not liable for failure to fulfill its obligations for any accepted order or for
delays in delivery due to causes beyond Seller’s reasonable control including, but not limited to,
acts of God, natural or artificial disaster, riot, war, strike, delay by carrier, shortage of product, acts
or omissions of other parties, acts or omissions of civil or military authority, Government priorities,
changes in law, material shortages, fire, floods, epidemics, quarantine restrictions, acts of terrorism,
delays is transportation or inability to obtain labor, materials or products through its regular sources,
which shall be considered as an event of force majeure excusing Seller from performance and
barring remedies for non-performance. In an event of force majeure condition, the Seller’s time
for performance shall be extended for a period equal to the time lost as a consequence of the force
majeure condition with subjecting Seller to any liability or penalty. Seller may, at its option, cancel
the remaining performance, without liability or penalty, by giving notice of such cancellation to the
Buyer.
Technical Assistance or Advice: Any technical assistance or advice offered to the Buyer is provided
only as an accommodation to the Buyer. Seller shall not be held liable for the content or Buyer’s use
of such technical assistance or advice nor shall any statement made by any of Seller’s representatives
in connection with the Products or Services constitute a representation or warranty, express or
implied.
General: (a) The laws of the state of North Carolina will exclusively govern any dispute between
Seller and Buyer, (b) Buyer may not assign this Agreement without the prior written consent of
the Seller. This agreement is binding on successor and assigns, (c) Products, including intellectual
property, are subject to any applicable rights of third parties, such as patents, copyrights and/or user
licenses.
T&C_8-14-14_RevA
A
Adapters 48
Arc Shield 56
B
Bags & Cases 50
Bags For Fiberglass Sticks 50
Bands 37
Blanket Buttons 67
Blanket Clamp 67
Blanket Holders 69
Blanket Mate 69
BLUE STRIPE® 36, 38, 39, 40, 42, 43, 44, 46, 47
BLUE STRIPE® Patented Alignment Feature 44
Boom Holster 51
BREAK-SAFE® 8, 9, 10, 11
Bucket Hook 72
Bucket Mate 72, 83, 84, 85, 86, 87, 88
Bucket Operable 37
Bucket Stick Storage Case 50
Bushing 61
Bypass Tool 58
C
Cable Stripping 32
Clamps 20, 67, 68
Cleaning Brush 21
Cleaning Supplies 52, 53
Cloth 52
Conductor Bar 12
Conductor Cleaning 20, 21
Conductor Cleaning Brush 21
Conductor Cleaning Clamp 20
Cutout 14, 16
Cutout Bypass Tool 14
Cutout Fuse Tube Remover 16
D
Demonstration Trailers 63
Discharge Hook 46
Disconnect Head 45
Double Prong Stick End 48
Dual Conductor Bars 11
Duckbill 12
E
Elbow-Mule™ 30
Elbows 30
Electric Meter 56
Electric Meter Jumper Leads 57, 58
Expendable Fuse Tube Caps 28
External Rod 40
G
General Purpose Cleaner 53
GRAB-IT 16
Grounding Assemblies 62
Ground Operable 37
Grounds Tester 39, 62
H
Hex Head 41
Hoe Attachment 48
Hot Stick Accessories 48
Hot Stick Holder 51
Hot Sticks 36
Hot Stick Wax 53
Hot Stick Wiping Cloth 52
I
Ice Roller 23
Insulated Rubber Blankets 66
Internal Rod 40
J
Jack Jumper™ 14, 15
Jumper-Aid™ 18, 71
Jumper Clamp 17, 70
Jumper Hook 17, 70
Jumper Leads 57, 58
Jumper-T 19
Jumper Wire 18, 71
K
Klondike Clamp 68
L
Load Break Tools 5
Load Pick-Up Tool 10
LOAD-RANGER® 6, 7
Load-Trainer™ 60, 61
Low Voltage Bypass Tool 58
M
Magnet 69
Measuring Sticks 38, 39
Meter Grabber 56
Metering Products 55
Molded Bucket Hooks 72
O
Overhead Cutout 26, 27, 28
Overhead Distribution 13
Overhead Fuse Cutouts 25, 26
F
Female Socket Adaptor 41
Ferrule End 57
Fiberglass Hot Sticks 33, 40, 41, 42, 43, 44, 45,
46, 47, 51
Fuse-Safe™ 12
Fuse Tube Caps 28
Fuse Tubes 16, 28
96
97
P
Pad Gear 31
Pad Mount 30, 31
Pad Mount Multi-Tool 31
Penta-Head Bolts 31
Phase Rotation Meter 61
Pick-Up Tool 8
Plastisol Hanger & Clamp 48
Polymeric Cutouts 26
Polymeric Ice Removal Spline Attachment 48
Polymeric Removal Hook Spline Attachment 48
Porcelain Cutouts 26
Portable Switch 10, 58
Q
Quick Connect 41
R
REACH Technology 62
Replacement Brush Set 20, 21
Rescue Hook 47
Rotary Blade Spline Attachment 48
Rotary Prong Spline Attachment 48
Rubber Blankets 66
Rubber End Cap For 1 1/4” Dia. Fiberglass 48
Rubber Goods 65
S
Safety Gear 47
Safety & Training 59
Sales Representative Directory 91
Sectional Disconnect Sticks 44
Sectional Sticks 44, 45
Severe Weather Stick 47
Shoestring Cutter 48
Shotgun Sticks 40, 41
Silicone Wipes 52
Simulation 60
Snap On Adapters 45
Socket 31
Spline End 40, 45
Storage Bags 45
Storm Stick 38, 47
Straight Sticks 42, 43
Strip-N-Coil™ 32
Substation Insulators And Bushings 22
Substation Sticks 39, 86
T
Tele-Pole 36
Telescopic Sticks 36, 37
Tool Demonstration Trailers 63
Torque Bar Spline Attachment 48
Trailer 63
Training 60
Transformer 22
98
U
Underground Cables 32
Underground Distribution 29
Universal Hotstick Probe 48
Universal
Spline 36, 38, 39, 40, 41, 45, 48, 86
URD Wrench 31
USBA 67
USBC 50, 51
USBM 69, 72
USBS 8, 9, 10, 11
USCC 20, 21
USCO 26, 27, 28
USCP 68
USCS 32
USDS 45
USEP 30
USFS 12
USGT 39, 62
USJH 17, 18, 70, 71
USJJ 14, 15
USJL 57, 58
USJT 19
USLR 6, 7
USMG 56
USMT 31
USRB 66
USRH 46, 47
USSA 48
USSB 50
USSG 40, 41
USSS 38, 42, 43
USTS 36, 37, 38, 39
USUW 31
USVS 22, 23
V
Varmint Shield 22, 23
Visible Gap 19
W
Wax & Cleaner 53
Wipes 52
Wrench 31
X
XFMR 60, 61
XLT 6, 7

Full Catalog - Utility Solutions, Inc.

Transcription

Similar documents

Power, Steering Proxes R888 sticks to the track whilst you stick to

Exploring Nature Play

fireplace

Service Manual

MADE to STICK - Heath Brothers

“Teaching that Sticks” is an article written

MYO Puili.indd - Around This World

Snare Drum Guidelines

Innovative AHEAD Drumsticks Mark 20th Anniversary