Rotary Filtration Systems

Transcription

Rotary Filtration Systems
Filtration
technology
Filtration systems at a glance
Made in Germany
WelcoMe to gneuSS
We look forward to meeting you
With more than 25 years of experience and over 50 international patents, the family-owned and
operated company Gneuss has made a name for itself as a supplier of innovative solutions for the
plastics processing industry. The main characteristics of our Rotary Melt Filtration Systems can be
summarized in one word: “Gneussconstant” – in other words not only process constant, but pressure and throughput-constant in addition to their fully automatic operation.
Based in Bad Oeynhausen, Germany, Gneuss is
Gneuss is present throughout the world. The
committed to the expectations of products
best possible technical support, excellent service
“made in Germany” while serving its customers
and spare parts availability is provided on all five
worldwide.
continents. Support is available around the clock
With its daughter company in the USA, offices in
via a telephone service hotline. Pilot lines for trials
Brazil and China, a cooperation partner in Japan
and development work are available at several
and together with representatives worldwide,
locations.
BuSineSS areaS
Filtration Technology
2 | The company
Processing Technology
Measurement Technology
content
Multifaceted expertise | Filtered for your advantage
Page 4 - 5
RSFgenius
• Process-constant
• Pressure-constant
• Fully-automatic
• Self-cleaning
Pressure fluctuations p = ± 1.5 bar
Page 6 - 9
SFXmagnus
• Process-constant
• Pressure-constant
• Fully-automatic
Pressure fluctuations p = ± 1.5 bar
Page 10 - 13
SF
• Process-constant
• Pressure-constant
Pressure fluctuations p = ± 1.5 bar
Page 14 - 17
KSF
• Process-constant
Pressure fluctuations p = 5 - 30 bar
Page 18 - 21
HS/HSSprimus
• Simple, rugged and
compact „safety net“
filtration
Pressure fluctuations p = 40 - 70 bar
Page 22 - 24
Accessories
• Swivel Valve
• Screen Packs / Filter Elements
Page 25 - 26
Content | 3
MultiFaceted expertiSe
Gneuss at a glance
In addition to Filtration Technology, Gneuss offers a wide range of services to ensure permanent
production consistency and product quality in the manufacture and processing of plastics.
Processing Technology
MRS Extrusion Technology
The Gneuss MRS Multi Rotation System offers new possibilities in the venting or
devolatilization of polymer melts. It allows, for example, the processing of PET
without pre-drying. Alternatively, this technology can also be used to introduce
gases (for foamed products) or fillers / additives homogenously into the melt.
Process and Control Technology
The use of patented measurement and control technology allows Gneuss to
simplify extrusion processes while at the same time increasing their reliability.
Viscosity Measurement
The Gneuss Online Viscometer VIS allows the permanent, real time monitoring
of polymer viscosity. Its rugged design and measurement accuracy are well proven. The viscosity measurement takes place without material losses. The design
permits easy cleaning, without influencing the process.
Measurement Technology
Measurement Technology
Gneuss Melt Pressure and Temperature Sensors are characterized by their extremely high precision, combined with a high degree of robustness. Consistent
application of latest technology ensures permanent quality control during the
production process.
4 | Gneuss at a glance
Filtered For your advantage
Why plastic melts love Gneuss Filtration
When selecting a Screen Changer or Melt Filtration System, the operating efficiency must be
considered: not only the investment costs, but also the operating costs. For example the screen
element costs, throughput variations or the creation of off grade product during screen changes
or the back flushing waste from self-cleaning systems should be considered.
High profitability
The return on investment for Rotary
∑ costs*
conventional
filtration system
Filtration Systems is extremely short:
RSFgenius
* investment costs and running costs
time
return of investment
usually < 1 year
Some economic advantages of the rotary Filtration Systems
Our performance
Your advantage
Guaranteed process- and pressure
Reduction of production and material losses.
consistency even when changing screens.
Minimization of operator attention.
Possibility of finer filtration.
Protection of downstream equpiment.
Increased profit due to product quality.
Usage of cheaper material (e.g. recycled material).
Capacity increases.
Minimal thickness variations.
Reduction of production tolerances.
Material savings.
Minimized back flushing loss
Material savings through the reduction of produc-
(RSFgenius).
tion and / or material losses.
Improved re-use of filter elements due
Reduction of screen costs.
to improved cleaning efficiency with
RSFgenius.
Extremely low energy consumption due
Reduction of running costs.
to compact design and high quality
insulation.
Economic advantages | 5
rSFgenius
Fully-automatic, pressure-constant, permanent process consistency
With regard to the achievable product quality, economic efficiency and in terms of operator and
maintenance friendliness, the RSFgenius offers unrivalled possibilities. This fully-automatic and
pressure-constant filtration system can be used in virtually any application, for automation of
the production process and for the manufacture of a high quality final product.
application fields
• Canbeusedforallplasticmaterials
• Max.activescreenarea2,500 cm
2
2
• Max.filtrationcapacity1.8 m / h
• Max.pressure350 bar*
• Max.temperature320 °C*
* can be increased as an option
Design
The filter disk – on which the screen cavities are
procedure. Thanks to the modular design of
located in a ring pattern – is completely encap-
this filtration system, it is possible to replace the
sulated by the two filter blocks. Screens can be
few wearing parts (such as heater elements and
inserted into the cavities by opening a small hatch
bearing bushings) during operation. Continuous
door giving access to the cavities. The production
production over many years is thus made possible.
process is not disturbed by the screen change
Mode of operation
When a pressure increase upstream of the filter is
registered, the filter disk is indexed by means of
a hydraulic drive. This guarantees that the active
screen area is always kept constant.
Just before the contaminated screen
is reintroduced into the melt channel,
it is cleaned by a patented, integrated
back-flush piston system.
6 | RSFgenius
Safety cover
Drive
Filter disk
Hatch door for
screen change
Screen cavity
Junction box
Melt channel
Back-flush piston
Filter block
Melt discharge opening
The advantages of the RSFgenius Filtration System
Fully-automatic mode of operation with integrated self-cleaning
The filtration system operates fully-automatically and ensures 100 % availability of the line. Depending on
the contamination level, a screen change (which takes approx. 20 - 30 minutes) is carried out approx. every
1 - 16 weeks and has no influence on the production process and product quality.
Constant melt pressure, temperature, viscosity and throughput
By always keeping the size of the active screen area constant, pressure, temperature, viscosity and throughput of the melt remain constant, which guarantees the highest end product quality.
Guaranteed melt purity and quality, short dwell time of the melt
Optimal flow channel design and encapsulation guarantee lasting purity and quality of the melt after the
filtration. The short dwell time of the melt in the filtration system (< 1 minute) permits quick material or
color changes. Filtration finenesses down to 1μm are possible.
Simple and safe screen changes, low filtration costs
Screen changes do not expose personnel and environment to any danger. With the fully encapsulated design
of the RSFgenius, influences from the environment (e.g. moisture, oxygen) during the filtration process are
excluded. Due to the very effective screen cleaning with high pressure impulses, screens are automatically
re-used 100 - 400 times (depending on the filtration fineness).
Compact size and minimal installation effort
The small and compact design of the RSFgenius makes a simple and cost-efficient integration possible
even in a very confined space. Thanks to the compact design and the high quality insulation, the energy
consumption is extremely low.
RSFgenius | 7
rSFgenius
Technical data
technical data rSFgenius
filter type
screen area
active
in cm²
heating
capacity
in watt
capacity
in
cm² / h
electric
oil /
vapor
heater
zones
electric
oil /
vapor
pressure
in bar
max. (1)
temp.
in °C
max.
Q in
kg/h
dimensions in mm
weight
in kg
(3)
(2)
A
B
C
D
E
F
G
H(4)
I
RSFgenius 45
35
750
7960
8000
3
2
350
320
150
1035
321
725
265
430
185
92
20
110
240
RSFgenius 60
80
1000
7960
8000
3
2
350
320
400
1035
321
725
265
430
185
92
25
110
220
RSFgenius 75
115
1500
8270
9000
3
2
350
320
590
1100
351
785
270
510
232
65
25
140
360
RSFgenius 90
190
3000
18480
20000
4
2
300
320
870
1330
443
875
335
637
328
80
25
160
740
RSFgenius 150
400
4600
22080
22000
4
2
250
320
2175
1400
469
910
360
707
362
62
35
160
975
RSFgenius 175
590
5600
28400
30000
4
2
250
320
2700
1750
603
1165
480
855
405
120
40
220
1850
RSFgenius 200
860
6800
38000
40000
6
2
220
320
4050
1840
695
1250
390
840
555
120
45
250
3300
RSFgenius 250
1200
9500
46000
48000
6
2
220
320
5410
2000
750
1390
610
1080
605
80
50
300
4200
RSFgenius 330
1850
14000
-
60000
-
2
200
320
8330
2445
925
1820
735
1320
695
131
50
300
7300
RSFgenius 400
2500
18000
-
72000
-
2
180
320
11675
2675
1080
1960
820
1550
800
75
50
350
11500
(1) = High pressure versions available as an option.
(2) = Up to 400 °C possible as an option.
(3) = Based on: 1000 Pas, 60 μm und p 40 bar.
(4) = The dimension „H” can be freely chosen, the values given are minimum values.
8|RSFgenius
Applications RSFgenius
The RSFgenius, with its unique sequential back
flushing system, is the ultimate back flushing
screen changer and can be implemented for
practically all applications. It is in operation in the
manufacture of film and sheet, filament, staple
and nonwoven fibers, compounding and recycling
as well as on numerous other applications.
RSFgenius in recycling (repelletizing)
The RSFgenius provides the best possible return
on investment in applications with a very high
contamination level and / or where a high level of
automation or high product quality are important.
Thanks to its unique back flushing system, the back
RSFgenius in the manufacture of PET thermoforming sheet
flushing losses are minimal.
Depending on the application, this figure typically
lies between 0.01 % and 0.3 % of the throughput
rate – in most cases only 10 % of the material loss
from back flushing encountered with conventional
back flushing screen changers.
In terms of performance and cost efficiency, the
RSFgenius represents the highest level available
worldwide.
RSFgenius in the manufacture of PET strapping tape
typical applications for the rSFgenius:
Sheet manufacture:
Semi-finished
resins:
Fiber manufacture:
• (Biaxially)orientedfilm
products:
• Monomer
• Technicalyarn
• Thermoformingsheet/
• Pipes
• Polymer
• Textilefiber/
• Sheet
• Pellets
castfilm
filament
• Foamsheet
• Profiles
• Staplefiber
• Blownfilm
• Tubes
• Nonwovens
• Spandex
recycling:
compounding:
• Recycling
• Masterbatch
• PETbottleflakes
• Technical
polymers
RSFgenius | 9
SFxmagnus
Permanent pressure and process consistency
The SFXmagnus operates fully-automatically as well as process- and pressure-constant. It is
suitable for almost every application. It is characterized by an extra large active screen surface
area, its compact design, as well as extremely easy operation. Screen changes do not have any
influence on the product quality.
application fields
• Canbeusedforallplasticmaterials
• Max.activescreenarea7,600 cm
2
• Max.pressure350 bar *
• Max.temperature320 °C *
* can be increased as an option
Design
The filter disk – on which the screen cavities are lo-
Thanks to the modular design of this filtration sys-
cated in a ring pattern – is completely encapsulated
tem, it is possible to replace the few wearing parts
by the two filter blocks. Screens can be inserted
(such as heater elements and bearing bushings)
into the cavities by opening a small hatch door gi-
during operation. Continuous production over
ving access to the cavities. The production process
many years is thus made possible.
is not disturbed by the screen change procedure.
Mode of operation
When a pressure increase upstream of the filter is
registered, the filter disk is indexed automatically
by means of a pneumatic or hydraulic drive. This
guarantees that the active screen area is always
kept constant and that the pressure upstream of
the filter increases only slightly during the whole
production process.
After the cavities have passed through the melt
flow, the screens can be removed without disturbing the production process.
10|SFXmagnus
Safety cover
Filter disk
Drive
Hatch door for
screen change
Melt channel
Filter block
Screen cavity
TheadvantagesoftheSFXmagnus Filtration System
High economic efficiency
The extra large active screen surface area in relation to the screen changer size allows a unique economic
efficiency of the SFXmagnus. The return on investment is realized within a very short period of time.
Consistency of melt pressure, temperature, viscosity and throughput
By assuring a consistent active screen area, the pressure can be kept nearly constant during the whole
production process. Melt temperature, viscosity and throughput are also free of variations at any time.
Constant quality of the final product is guaranteed even during screen changes.
Melt purity and quality are always guaranteed
Thanks to the optimized melt channel flow path and completely airtight encapsulated design, the requirements with regard to the purity and quality of the melt can be achieved and permanently maintained.
Minimized Melt Residence Time
The optimized rheological design of the melt channel flowpath ensures a minimized residence time (< 1
minute) thus ensuring for example fast material or color changes.
User-friendly screen changes
The control system informs the operator in advance of an upcoming screen change. The screens can be
changed quickly and easily and without any influence on the process or pressure consistency.
Small size and easy installation
The remarkably compact size of the SFXmagnus allows an easy and inexpensive integration even
within limited space. Thanks to the compact design and the high quality insulation, the energy consumption is extremely low.
SFXmagnus|11
SFxmagnus
Technical data
technical data SFxmagnus
filter type
screen area
heating
capacity
in watt
active
in cm²
total in
cm²
electric
SFXmagnus 45
90
250
7500
SFXmagnus 60
160
450
SFXmagnus 75
220
SFXmagnus 90
oil /
vapor
heater
zones
pressure
in bar
max. (1)
temp.
in °C
max.
dimensions in mm
Q in
kg/h
weight
in kg
(3)
(2)
electric
oil /
vapor
A
B
C
D
E
F
G
H(4)
8500
3
2
350
320
400
800
300
720
700
190
110
185
20
250
8000
10000
3
2
350
320
700
830
360
750
800
220
125
185
20
350
600
8500
10000
3
2
350
320
900
880
390
800
900
230
140
232
25
450
350
1000
19000
22000
4
2
300
320
1000
1100
500
1050
960
280
160
328
30
800
SFXmagnus 130
500
1400
19000
25000
4
2
300
320
2000
1150
530
1100
1000
300
175
362
30
950
SFXmagnus 150
600
1600
19000
25000
4
2
300
320
2500
1200
550
1200
1050
320
175
405
35
1050
SFXmagnus 175
1000
2200
25000
32000
4
2
250
320
3500
1300
650
1300
1100
380
250
405
40
1700
SFXmagnus 200
1300
3100
35000
36000
6
2
200
320
5000
1300
750
1350
1400
450
270
555
45
3500
SFXmagnus 250
1700
4000
46000
48000
6
2
200
320
7800
1400
800
1400
1500
500
320
605
50
4200
SFXmagnus 330
2900
6400
-
60000
-
2
200
320
12000
1700
950
1700
1550
550
350
695
55
7000
SFXmagnus 400
3800
8700
-
60000
-
2
200
320
16000
1800
1100
1800
1600
650
400
800
60
9000
SFXmagnus-D 330
5800
12800
-
60000
-
3
200
320
24000
1800
950
1700
1600
550
350
1100
55
9500
SFXmagnus-D 400
7600
17400
-
80000
-
3
200
320
32000
1900
1100
1800
1700
650
400
1400
60
14000
(1) = High pressure versions available as an option.
(2) = Up to 400 °C possible as an option.
(3) = Based on: 1000 Pas, 60 μm und p 40 bar.
(4) = The dimesion „H” can be freely chosen, the values given are minimum values.
12|SFXmagnus
ApplicationsSFXmagnus
The SFXmagnus is suitable for practically every
application. It is operated with great success on
sheet, film, filament, staple and nonwoven fibers,
pipe, profile, compounding and recycling as well
as on numerous other applications. The SFXmagnus is used wherever the application does not
require a self-cleaning system due to the level of
contamination and / or filtration fineness.
SFXmagnus in the manufacture of blown film
The SFXmagnus is one of the most compact Filtration Systems available on the market and can be
installed on even the most cramped extrusion lines.
SFXmagnus in the manufacture of non woven
fibers
In automatic mode, the screens are used equally.
They are changed as a set, without any influence
on the process. Typically, the unit will run for
several days before a screen element change is
necessary.
SFXmagnus in the manufacture of thermoforming sheet
typical applications for SFxmagnus:
Sheet manufacture:
Semi-finished
resins:
Fiber manufacture:
• (Biaxially)orientedfilm
products:
• Monomer
• Technicalyarn
• Thermoformingsheet/
• Pipes
• Polymer
• Textilefiber/
• Sheet
• Pellets
castfilm
filament
• Foamsheet
• Profiles
• Staplefiber
• Blownfilm
• Tubes
• Nonwovens
• Spandex
recycling:
compounding:
• Recycling
• Masterbatch
• PETbottleflakes
• Technical
polymers
SFXmagnus|13
SF
Maximumpressureandprocessconsistency
The SF Filtration System operates continuously and pressure- and process constant. The screen
change procedure does not influence the product quality. Furthermore, short flow channels –
free from dead spots – guarantee an extremely short dwell time of the melt in the system.
application fields
• Canbeusedforallplasticmaterials
• Max.activescreenarea500 cm
2
• Max.pressure500 bar *
• Max.temperature320 °C *
* can be increased as an option
Design
The filter disk – on which the screen cavities are
Thanks to the modular design of this filtration sys-
located in a ring pattern – rotates between the
tem, it is possible to replace the few wearing parts
two filter blocks. To change the screens, the safety
(such as heater elements and bearing bushings)
cover has to be opened. The production process is
during operation. Continuous production over
not disturbed by the screen change procedure.
many years is thus made possible.
Mode of operation
When a pressure increase upstream of the filter
due to contamination is registered, the filter disk is
indexed by means of a pneumatic drive.
This guarantees that the free screen area is always
kept constant and that the pressure variation in
front of the filter is < 1.5 bar.
14|SF
Safety cover
Drive
Junction
box
Filter disk
Melt channel
Screen cavity
Filter block
The advantages of the SF Filtration System
Constant melt pressure, temperature and viscosity
By always keeping the size of the free active screen area constant, the pressure can be kept constant
during the whole production process (max. pressure variations of ±1.5 bar). Also, melt temperature and
viscosity are permanently free from variations. Thus, the end product quality is always constant.
Melt purity and quality are always guaranteed
Melt purity and quality downstream of the filtration system are permanently achieved. Rheologically optimized melt flow channels.
Very short dwell time of the melt
Due to the optimal rheological flow channel design, the dwell time of all the melt in the filtration system is
very short (< 1 minute).
Simple handling during screen changes
The operator is informed in time about upcoming screen changes by the control system. Changing screens
is a simple and quick procedure and does not have any influence on the process and product quality.
Compact size and simple installation
The compact design of the SF makes a simple and cost-efficient integration possible even in a very confined space. Thanks to the compact design and the high quality insulation, the energy consumption is
extremely low.
SF|15
SF
Technical data
technical data SF
filter
type
active
screen
area
heating
capacity
in watt
in cm²
electric
SF 30
8
1200
SF 45
19
SF 60
liquid
heater
zones
pressure in
bar
max.(1)
temp.
in °C
max.
dimensions in mm
Q in
kg/h
weight
in kg
(3)
(2)
electr.
liquid
A
B
C
D
E
F
G
H
I(4)
K
1870
2
2
500
320
40
460
154
-
250
90
200
95
93
15
90
30
1900
2730
2
2
500
320
120
560
210
-
335
130
250
138
112
20
120
75
35
3090
3690
2
2
500
320
220
670
270
-
420
150
310
172
112
20
240
115
SF 75
45
5860
8580
2
2
500
320
310
720
290
-
440
170
350
225
112
25
175
220
SF 90
70
7300
10140
2
2
350
320
550
900
395
20
580
220
440
319
122
30
220
460
SF 130
135
8000
10760
2
2
350
320
910
950
432
20
630
245
470
352
122
30
220
530
SF 150
180
8000
10760
2
2
350
320
1430
950
432
20
630
245
470
352
122
35
220
550
SF 175
250
12000
16380
3
2
350
320
2080
1100
550
20
940
305
580
400
162
40
310
1200
SF 200
320
-
28000
-
2
300
320
2850
1200
635
20
1150
360
680
445
175
45
320
1680
SF 250
500
-
32000
-
2
250
320
4070
1300
690
20
1170
400
685
545
125
50
370
2300
(1) = High pressure versions available as an option.
(2) = Up to 400 °C possible as an option.
(3) = Based on: MFI 2-5, filtration fineness 200 μm and differential pressure 50 bar.
(4) = The dimesion „I” can be freely chosen, the values given are minimum values.
16|SF
Applications SF
The SF was the first ever Rotary Filter and is running on many applications for over 25 years now.
This model is suitable for most applications but is
used today mainly on PVC processes and in the
manufacture of PS foam sheet.
The rheologically optimized, extremely streamlined melt flow channels with no dead spots come
into their own when processing rigid PVC, together with the pressure-stable operation (± max.
1.5 bar guaranteed) this system offers.
SF in the manufacture of foam sheet
Thanks to the constant processing conditions with
regard to shear, pressure and temperature, burn
ups can be avoided. The SF Melt Filtration System
is used on both rigid and flexible PVC, for example
in recycling or blown and cast film, as well as in the
manufacture of pipes and tubing.
SF in PVC processing
typical applications for SF:
Sheet manufacture:
Semi-finished products:
• Thermoformingsheet/
• Pipes
• Sheet
castfilm
• Foamsheet
• Profiles
• Blownfilm
• Tubes
SF|17
KSF
Permanent process consistency
The KSF Filtration System guarantees a constant production process. As neither pressure spikes
nor degraded material are created, melt purity and a constant product quality are guaranteed.
Further, short flow channels – free from dead spots – guarantee a short dwell time of the melt.
application fields
• Canbeusedforallplasticmaterials
• Max.activescreenarea1,920cm
2
• Max.pressure600bar*
• Max.temperature320°C*
* can be increased as an option
Mode of operation
The KSF Filtration System is characterized by rheo-
screen cavities, thereby avoiding pressure spikes
logically optimized melt flow channels absolutely
and consequently avoiding process disturbances.
free from dead spots. The channels are matched
It is possible to remove the breaker plates during
individually to the respective filtration task. When
screen changes and replace them with clean
the pressure upstream of the filter increases due to
plates. This is especially important for thermally
contamination of the screen and the selected pres-
sensitive materials, to make sure that always a
sure value is reached, a screen change is carried
100 % clean cavity and breaker plate enter into
out automatically. During screen changes, poly-
the melt flow.
mer flows briefly over either 2 (KSF) or 3 (KSF x 2)
KSF x 1
Changing position
Operation position
(2cavities)
(1activecavity)
18|KSF
KSF x 2
Changing position
Operation position
(3cavities)
(2activecavities)
Filter disk
Filter disk
Cavity
Cavity
Filter block
Filter block
Safety cover
Filter disk
Drive
Hatch door for
screen change
Melt channel
Screen
cavity
Filter block
TheadvantagesoftheKSFFiltrationSystem
No pressure spikes during screen changes
Since the active screen area is enlarged during screen changes, no additional pressure increase is caused.
Pressure spikes are avoided.
No degraded material during screen changes
Since the filter disk always turns in one direction, self-cleaning is ensured. This avoids the creation of
degraded material. Furthermore, the filter disk can be cleaned completely without any problems.
Very short dwell time of the melt
Dead spots in the filtration system are avoided by matching the melt channel to the individual application.
Therefore, the lowest possible pressure drop as well as the shortest dwell time of the melt in the system
are guaranteed.
Simple handling during screen changes
The operator is warned by the control system in advance of automatic screen changes. The changing of the
screen packs is a simple and quick procedure. The control system can also be configured to run through a timedependent change sequence (e.g. during 1 week). This is recommended for production cycles < 1 week.
Compact size and simple installation
The small and compact design of the KSF makes simple and cost-efficient integration possible even in a very
confined space, and guarantees process-constant filtration even at high melt pressures.
KSF|19
KSF
Technical data
technical data KSF
filter
type
active
screen
area
heating
capacity
in watt
pressure
in bar
max. (1)
heater
zones
in cm²
electric
liquid
electr.
liquid
technische
daten
KSF
KSF 30
KSF 45
KSF 60
7
Filtertyp
HeizFilterleistung in
28fläche3400
4400
Watt
1
-
2
Heizzonen
F
G
H
I(4)
K
35
555
160
250
310
98
-
190
135
15
90
Q100
in
kg/h
685
225
310
Abmessungen
in
428
108
25 mm
205
145
15
110
120
50
Ge-80
wicht
100
in kg
505
145
15
238
175
20
385
545
150
35
300
230
20
120
290
64 in cm² 6400elektr. 8320flüssig 2 elektr. 2 flüssig 600
320
500
A891
B339
C421
D583
E 163
F 42
G340
H 295
I(4) 25
K180
350
95
2
600
500
320
320
700
40
945
460
415
154
205
800
250
215
25
90
200
375
95
363
93
30
220
90
550
30
2
600
500
500
320
320
320
900
120
1400
1065
468
560
210
1190
550
855
249
30
425
400
335
130
250
138
112
250
1110
300
30
525
445
220
20
120
35
240
800
75
1000
2
400500
320
320
220
2000
670
1270 270
600
-300 420
1000 150330 310 40 172
570 112490
20 40 240
285
115
1500
2
300
500
320
320
2800
310
1447
685
720
290
2
300
350
250
320
320
320
4000
550
5800
1135
790
900
395
1210
910
2
250350
320
320
910
7900
2
500
350
500
320
320
320
70
1430
200
2
350
500
320
320
8
6800
8800
2
1200
1870
2
SF 45
2
KSF 175SF 60
240 35 200002240260003690 3
2
KSF 200
315
45
490
-
36000
5860
8580
2
70
2
KSF 350 SF 130
960 135
10760 - 800084000
2
KSF 30 x 2
SF 150
KSF 45 x 2
14
1600
1
180
8000
10760
32
1760
2
SF 175
KSF 60 x 2
56
705
-
250
2
2
62000
7300
10140
84000
-
SF 90
E
340
14000
18200
2
19
1900
2730
180
16000
20800
3
KSF 300
(2)
600
D
305
135
SF 75
(1)
2
C
280
2
600
in
B
875
7400
2
A
715
KSF 110
KSF 250
Druck
bar
Max.
320
Temp.
320
in °C
weight
in kg
300
KSF 90
KSF 150
Max.
600
320
dimensions in mm
(3)175
5680
2
600
Q in
kg/h (3)
320
44
SF 30
-
16Aktive1760
KSF 75
KSF 130
1600
temp.
in °C
max.(2)
2
2
2
2
2
2
2
-
12000
16380
3400
4400
2
3
KSF 75 x SF
2 200
88 320 5680 - 740028000 2
-
KSF 90 x 2
SF 250
KSF 110 x 2
130
8320
2
500
32000
190
6800
8800
2
KSF 130 x 2
265
14000
18200
KSF 150 x 2
355
16000
KSF 175 x 2
480
20000
KSF 200 x 2
630
KSF 250 x 2
2
172
1120
375
50
650
560
440
170
350
225
112
30
325
175
1680
220
365
1910
645
20
750
660
20
580
220
440
319
122
400
2040
710
20
850
670
360
30
220
60
420
3800
460
6500
950
1555 432
1115
20695 630
2980 245
1325 470 20 352
945 122790
30100 220
315
530
8500
555
950
685
160
432
225
250
310
98
190
135
20
630
245
470
352
122
310
428
108
25
205
145
90
35
220
25
110
50
550
80
2080
350
1100
715
550
280
20
940
305
580
400
162
340
505
145
15
238
175
40
310
110
1200
100
-
340
15
25
45
50
15
35
2
500300
320
320
600
2850
875
1200
305
635
545 360150 680 35 445
300 175230
20385 1150
120
45 45 320
290
1680
2
2
500
250
500
320
320
320
1000
4070
1400
891
1300
945
339
690
415
295
55
180
421
583
163
42
340
20
1170
400
685
545
125
50
370
205
800
215
25
375
362,5
60
220
350
2300
550
2
2
400
320
1800
1065
468
172
855
249
30
425
400
65
220
800
20800
3
2
350
320
2800
1190
550
250
1110
300
30
525
445
80
240
1000
26000
3
2
300
320
4000
1270
600
300
1000
330
40
570
490
90
285
1500
-
36000
-
2
250
320
5600
1447
685
340
1120
375
50
650
560
100
325
1680
980
-
62000
-
2
250
320
8000
1135
790
365
1910
645
20
750
660
100
360
3800
KSF 300 x 2
1410
-
84000
-
2
200
320
11600
1210
910
400
2040
710
20
850
780
100
420
7500
KSF 350 x 2
1920
-
84000
-
2
200
320
16000
1555
1115
695
2980
1325
20
945
790
100
315
8500
6400
-
2
-
2
(1) = High pressure versions available as an option.
(2) = Up to 400 °C possible as an option.
20|KSF
(3) = Based on: MFI 2-5, filtration fineness 200 μm and differential pressure 50 bar.
(4) = The dimesion „I” can be freely chosen, the values given are minimum values.
ApplicationsKSF
The KSF is frequently used on compounding applications or those whereby frequent material type,
grade or color changes are made.
Thanks to the rheologically streamlined melt
channels and removable breaker plates, material
type, grade or color changes can be carried out
in only a few minutes. The rotary disk can be
completely cleaned without difficulty.
KSF in pipe compound manufacture
This model is therefore suitable for thermally
The KSF has proven itself to be very successful in
sensitive materials.
the processing not only of TPU and TPE, rubber
and silicone, but also foamed polyolefins.
KSF in cable compounding
typical applications for KSF:
Semi-finished products:
compounding:
• Pipes
• Masterbatch
• Sheet
• Rubber
• Profiles
• Technicalpolymers
• Tubes
• Siliconeprocessing
KSF|21
hSprimus and hSSprimus
The hydraulic screen changers
With the hydraulic screen changers HSprimus and HSSprimus sturdy screen changers are
available, which represent major technical advances combined with operator friendliness
and permanent availability. The HSprimus and HSSprimus are also available as diverter valves.
application fields
• Canbeusedforallplasticmaterials
• Max.activescreenarea855 cm
2
• Max.pressure800 bar
• Max.temperature280 °C *
* can be increased as an option
Mode of operation
1
2
3
4
5
6
1
Housing clamping blocks, floating design, simple tightening via a single screw.
2
Housing blocks, absolutely leak-free through flexible high pressure tensioning.
3
Melt channel sleeves, matched to the individual processing-technical requirements.
4
Support breaker plate (removable), with maximum possible active filtration area. The shape of the
HSprimus breaker plate is round, whereas it is oval for the HSSprimus, which therefore is especially
suited for twin screw extruders.
5
Sliding ring in special steel ensures permanent leak free operation and high availability of the
extrusion line.
6
EMS ring (Elastic Metal System) guarantees a leak-free operation unaffected by high pressures and
temperatures.
22 | HSprimus, HSSprimus
Junction box
Drive
Filter block
Melt channel
Safety cover
The advantages of the HSprimus and HSSprimus screen changers
Sturdy design
The metallic sealing system is highly wear-resistant. It is, however, flexible and guaranteed leak-free even
with low-viscosity melts up to 800 bar.
Optimum rheological properties
The rheology of the melt channel and the inner parts of the screen changer can be individually adjusted to
the specific requirements. There are no edges, “dead spots“ and no seals. These screen changers are therefore excellent for PVC.
Short residence time
The residence time of the melt in the screen changer is < 1 minute, which ensures that material or color
changes can take place quickly and without problems.
Simple handling during screen changes
A screen change can be made at any time (even while the production is running).
Maximum screen surface area
The increased screen surface area of the HSSprimus leads to great technological and economic advantages
without rheological compromises – especially for twin screw extruders, but also for single screw extruders.
Applications HSprimus and HSSprimus
The HSprimus is intended for applications where continuous filtration is not required. For example where
only virgin material is used or only “safety net” filtration is required.
HSprimus, HSSprimus | 23
hSprimus and hSSprimus
Technical Data
technical data hSprimus
filter type
screen
area
heating
capacity
in watt
heater
zones
pressure
in bar
max.(1)
in cm²
dimensions in mm
A1 / A2
(max.)(1)
B
C (2)
weight
in kg
D
E
F
G
HSprimus 20
5
920
1
800
20
120
75
(4xM12)
70
475
215
130
50
HSprimus 30
10
920
1
800
30
139
110
(4xM16)
120
500
215
260
50
HSprimus 45
20
1020
1
800
45
139
110
(4xM16)
120
560
290
260
60
HSprimus 60
35
1400
1
800
60
164
120
(8xM12)
130
650
300
275
75
HSprimus 75
50
2800
1
800
75
204
140
(8xM20)
155
800
305
290
120
HSprimus 90
70
3000
1
800
90
229
155
(8xM20)
160
880
390
325
170
HSprimus 110
105
4600
2
800
110
264
225
(8xM24)
200
1000
405
360
280
HSprimus 130
145
5840
2
500
130
284
245
(8xM24)
210
1050
460
380
370
HSprimus 150
195
8000
2
500
150
324,5
285
(8xM24)
250
1150
565
400
600
HSprimus 180
285
10000
2
300
180
374
295
(8xM30)
260
1400
625
420
1000
HSprimus 220
415
11200
2
250
220
450
370
(12xM30)
300
1550
685
450
1400
HSprimus 270
615
12500
2
200
270
550
455
(12xM36)
380
1800
800
520
2200
HSprimus 320
855
15600
2
200
320
600
530
(12xM36)
420
1880
870
560
3500
technical data hSSprimus
filter type
screen
area
heating
capacity
in watt
heater
zones
pressure
in bar
max. (1)
in cm²
dimensions in mm
A1 / A2
(max.)(1)
B
C (2)
weight
in kg
D
E
F
G
HSSprimus 20
10
1600
1
450
20
183
75
(4xM12)
150
590
280
260
HSSprimus 30
20
1600
1
350
30
183
110
(4xM16)
150
590
280
260
90
HSSprimus 45
40
1600
1
350
45
183
110
(4xM16)
150
590
280
260
100
HSSprimus 60
70
2400
1
350
60
192
120
(8xM16)
165
740
310
275
140
HSSprimus 75
110
3400
1
300
75
220
140
(8xM20)
185
730
350
290
165
HSSprimus 90
150
4000
2
300
90
230
155
(8xM20)
210
880
450
325
220
HSSprimus 110
225
5600
2
300
110
260
200
(8xM24)
245
980
480
360
310
HSSprimus 130
310
7200
2
250
130
300
220
(8xM24)
260
1195
600
400
460
HSSprimus 150
425
9500
2
250
150
330
250
(8xM30)
290
1350
750
430
700
HSSprimus 180
625
12800
2
250
180
380
295
(8xM30)
300
1750
800
450
1200
(1) = Diameter individually adjustable.
24 | HSprimus, HSSprimus
(2) = Diameter.
90
SWivel valve Wv
Discharge valve for polymer melts
The Swivel Valve WV is a rugged value for money discharge valve. Its advanced design
combines easy operation with excellent availability. Thanks to the compactness of its design,
it is ideal for modern extrusion lines. The discharge valve is also available with a filtration
function (screen changer). The customers can select between manually, hydraulically and
pneumatically operated designs.
application fields
• Canbeusedforallplasticmaterials
• Max.channelØ 490 mm
• Max.pressure800 bar
Operating
position
Discharge
position
The advantages of the swivel valve WV
Sturdy design
The metallic sealing system is highly wear-resistant and is backed by a ten year warranty.
It guarantees a leak-free operation at pressures up to 800 bar.
Optimum rheological properties
The melt channel rheology of the Swivel Valve WV is optimized and thus ensures an
even melt flow.
Simple handling
The melt flow can be diverted at any time, even while the production is running.
Optimum performance even at high temperatures
The standard unit is suitable for temperatures of up to 320 °C. Special versions for higher
temperatures are available (option).
Integrated melt filtration
As an option, the Swivel Valve WV can also be supplied with integrated melt filtration.
WV | 25
Filter eleMentS / Screen pacKS
Fromthespecialistsinthefieldofpolymermeltfiltration
Gneuss guarantees consistently high polymer melt and product purity. Only wirecloth of
the highest quality, with the highest specification and with clearly defined openings are used
(ISO 9001 certified). We are pleased to make our long and extensive experience in the design
and specification of filter elements available for your advantage.
number of layers *
RSFgenius
Filtration
fineness in
microns
all model
sizes
1
5
SFXmagnus, SF, KSF,
HS/HSSprimus
45 - 75
90 - 150
175 - 400
5
5
5
3
5
5
5
5
6
5
5
5
5
8
5
5
5
5
12
5
5
5
5
16
5
5
5
5
20
5
5
5
5
25
5
4
4
4
30
5
4
4
4
40
5
3
4
4
60
5
3
4
4
80
5
3
4
4
100
5
3
4
4
125
5
3
4
4
160
5
3
3
3
250
5
2
3
3
315
5
2
3
3
500
3
2
2
2
800
3
1
1
2
1000
3
1
1
2
Compressed edges
as sealing area
2 supporting layers
Main filtration layer,
absolute fineness
down to 1μm
2 pre-filter layers
RSFgenius screen
* Standard Design. Material-specific custom made designs on request.
Reusability RSFgenius screens
400
400
250
200
200
150
30
100
70
50
40
60
120
150
80
100
1-6
8-12
16-30
40-80
0
100-200
250-315
Number of screen pack uses
300
250
400-500
Screen fineness [μm]
26 | Filter Elements
alWayS SoMeWhere near you
Our Locations
Based in Bad Oeynhausen, Germany, Gneuss is
headquarters in Bad Oeynhausen. Pilot lines are
committed to the expectations of products “made
also available for trials at our daughter company,
in Germany” while serving its customers worldwi-
Gneuss Inc. in the USA and at our cooperation
de. A technology center for processing technical
partner, Itochu SysTech in Japan.
trials and development work is available at Gneuss´
Subsidiary
Headquarters
Gneuss, Inc.
Gneuss Kunststofftechnik GmbH
10820-G Independence Pointe Parkway
Moenichhusen 42
Matthews, NC 28105, USA
32549 Bad Oeynhausen, Germany
Phone
+1.704.841.7251
Phone
+49.5731.5307.0
Fax
+1.704.841.7254
Fax
+49.5731.5307.77
E-Mail
gneuss.usa@gneuss.com
E-Mail
gneuss@gneuss.com
Sales and Service Centers
Gneuss Office Shanghai
Gneuss - Divisão America do Sul
Room 702 Block D, Everbright
Al. Rio Negro, 1084 - cj 114
Convention & Exhibition Center
06454-000 - Barueri - SP, Brazil
No. 80 Cao Bao Rd.
Phone
+55.11.4191.1449
200235 Shanghai, China
Fax
+55.11.4191.1449
Phone
+86.21.6432.6953
E-Mail
gneuss@uol.com.br
Fax
+86.21.6432.5231
E-Mail
gneuss.china@gneuss.com
GNEUSS
Service hotline: +49 700 463877 24
www.gneuss.com
G
Locations | 27
www.gneuss.com