KSC-360L

Users manual
US Subject to change
KSC-360L
Lithium-Ion Cordless Screwdriver
INT
ERTEK
CM
C
LISTED
3107195
www.ferm.com
0611-27
US
Art.No. CDM6056
US
Kingcraft Lithium-Ion Cordless Screwdriver
1
Table of contents:
Page:
1.
2.
3.
4.
5.
6.
7.
2
7
7
8
8
9
14
Safety instructions
Assembly instructions
Operation
Charging the battery
Maintenance
Technical specifications
Guarantee
7. GUARANTEE
The guarantee conditions and contact information (service and customer assistance) can be
found on the separately enclosed guarantee card.
It is our policy to continuously improve our products and we therefore reserve the right to
change the product specification without prior notice.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
Kingcraft
Kingcraft
14
US
US
1. SAFETY INSTRUCTIONS
Warning! Always read the instruction for electrical products carefully before use. It
will help you understand your product more easily and avoid unnecessary risks.
Keep this instruction manual in a safe place for future use.
1
The following symbols are used in these instructions for use:
Denotes risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instructions in this manual.
Indicates electrical shock hazard.
2
Read instructions carefully
3
Left and right rotation
This symbol designates that this tool is listed with both Canadian and U.S.
requirements by Underwriters Laboratories.
General safety instuctions
Warning! Read all instructions. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below
refers to your operated (corded) power tool or battery operated (cordless) power tool.
Save These Instructions!
1) Work area
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools create sparks which may ignite the dust
or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
4
5
6
Parts list
1.
Bit holder
2.
Housing
3.
Elektromotor
4.
Lithium-Ion battery 3.6 V
5+6. Switch
13
Kingcraft
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will
Kingcraft
2
US
US
d.
e.
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.Always
use tool in conjunction with a residual circuit breaker device.
3) Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. Amoment of inattention while operating power tools may
result in serious personal injury.
b. Use safety equipment. Always wear eye protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have the
switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. Awrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g. If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of these devices can
reduce dust related hazards.
4) Tool use and care
a. Use clamps or a vice to hold work. It’s safer than using your hand and it frees both hands
to operate tool.
b. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
c. Do not use the power tool if the switch does not turn it on and off.Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
d. Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
e. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
f. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
g. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
3
Kingcraft
Fig.8
Fig.9
Fig.10
Kingcraft
12
US
US
h.
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking
into account the working conditions and the work to be performed. Use of the power
tool for operations different from intended could result in hazardous situation.
Fig.2
5) Battery tool use and care
a. Ensure the switch is in the off position before inserting battery pack. Inserting the
battery pack into power tools that have the switch on invites accidents.
b. Recharge only with the charger specified by the manufacturer.Acharger that is
suitable for one type of battery pack may create a risk of fire when used with another battery
pack.
c. Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
d. When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together may
cause burns of a fire.
e. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritations or burns.
Fig.3
6)
a.
Service
Please use a qualified expert who uses original replacement parts to repair your
power tool. This will ensure proper functioning of the power tool.
Save These Instructions!
11
Fig.4
Fig.5
Fig.6
Fig.7
Kingcraft
Kingcraft
4
US
US
Important safety notes on charger and batterypack
If you should come into contact with acid from the battery pack, immediately wash
the acid off with water. If acid comes into contact with your eyes, immediately rinse
your eyes with water and seek additional medical help!
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
1
Read and observe the charger and battery pack safety instructions before use.
Note! Only use the charger and battery pack provided by the manufacturer, otherwise a
danger of accident exists.
Protect the charger, battery pack and electric tool from moisture, such as rain or snow.
Check the power cable for signs of damage before using the charger.
If you notice signs of damage to the power cable then you must not use the charger. Have
the damaged cable immediately replaced.
The power cable must be removed from the power socket when the charger is not being
used. Do not pull the power plug by the power cable.
If the charger should fall, or be subjected to heavy mechanical stresses, have it checked for
damage by a recognized specialist workshop before use. Damaged parts must be
repaired.
Handle the battery pack carefully, do not drop it and protect it from sudden mechanical shocks.
Never attempt to repair the charger or the battery pack yourself. Repairs must always be
performed by a recognised specialist workshop otherwise the danger of accident exists.
Always removed the power plug from the power socket before cleaning or maintaining the
charger or battery pack.
Never charge the battery when the ambient temperature lies below 41 degrees Fahrenheit
or above 104 degrees Fahrenheit
The ventilation holes of the charger must remain free.
The battery pack must not be short-circuited.
8
2
3
A heavy current flows under short-circuit conditions. This can result in overheating,
fire or ruptures in the battery pack. This can damage the battery pack and/or
present the danger of an accident to the user
4
7
Therefore:
•
Never connect a cable to the battery terminal(s).
•
Ensure that no metal items (nails, paperclips, coins etc.) are in the battery
compartment.
•
Never subject the battery pack to water or rain.
•
Use only the battery pack provided with this cordless drill, to avoid mistakes and/or
risks.
5
Features
Fig. 1
1. Bit holder
2. On/Off-switch
3. Softgrip
4. Charging indicator
5. Charger connection
6. Extension piece
7. Bit
8. LED
14. Adamaged battery pack, or one that can no longer be charged, must be specially disposed
of. Do not throw this in the household rubbish.
15. Never throw the battery pack into a fire or into water. Adanger of explosion exists!
Electrical safety
When using electric tools, always observe the local regulations relating to fire risk, electric
shock and injury. In addition to the following instructions, also read the safety regulations in the
relevant special section.
5
Kingcraft
6
Fig.1
Kingcraft
10
US
US
Always check that the voltage of the battery pack matches the voltage specified on
the power label of the charger. Also check that your voltage matches the input
voltage of the charger.
6. TECHNICAL SPECIFICATIONS fications
D
Intended use
This screwdriver is intended for tightening and loosening screws (fig. 2 - 6). The screwdriver is
not suitable for screwdriving heavy constructions, for example repairing a big fence.
NL
Package contents
1 Cordless screwdriver
1 Charger
1 Magnetic bit holder
18 Accessories
1 Instruction manual
1 Warranty card
F
E
P
Charger input
Charger output
Battery capacity
Charging time
Max. torque
No-load speed
Weight
SF
N
NL
F
Remove the battery pack. When the electric tool is not being used, before maintenance
and when changing tools such as (e.g.) drills, bits.
E
Additional safety instructions
1. Only use the accumulator block with the battery charger provided – using other chargers
could be dangerous.
2. Keep the accumulator block, tool and battery charger away from damp and wet conditions.
3. Before using the battery charger, check all wires are properly connected.
4. If any wires on the charger are damaged, do not use it until these have been replaced.
5. When the charger is not in use it should not be plugged in. When unplugging, do not pull the
plug out by the cable.
6. If the charger breaks down or suffers from other technical problems, take it to a recognized
dealership to be checked before using it again. Any damaged parts must be replaced.
7. Take care when handling the accumulator block, do not drop it or knock it against other
things.
8. Never attempt to repair the battery charger or accumulator block yourself; this can be
extremely dangerous. Repairs should always be carried out by a
recognised dealership.
9. Always unplug the charger before cleaning or carrying out any other maintenance on it.
10. Do not attempt to charge the accumulator block in temperatures of below 41 degrees
Fahrenheit or above 104 degrees Fahrenheit.
11. Never throw the accumulator block into water or a fire – it may explode.
12. Turn the drill immediately off after the screw is fastened. Overloading and damaging the
battery or motor can be prevented this way. Use the torque to loosen the fastened screw.
Technical specifications
S
Replacing cables or plugs
If the power cable of this device is damaged then, to minimize danger, the manufacturer, their
customer service department or another suitably qualified person must replace it.
•
Check the machine, loose parts and accessories for transport damage.
I
D
120V / 60 Hz / 8 W
3,6 V / 600 mA
1,1 Ah
4 - 5 hours
3 Nm
230 r/min
340 gr.
DK
H
P
I
S
SF
N
DK
H
CZ
CZ
SL
SL
PL
PL
RU
RU
GR
GR
9
Kingcraft
Kingcraft
6
US
US
2. ASSEMBLY INSTRUCTIONS
4. CHARGING THE BATTERY
D
D
Save These Instructions!
NL
The numbers in the following text correspond with the pictures on page 10 - 12
Inserting and removing bits
Fig. 1 + 7
The bits can easily be placed directly into the bit holder or on the extension piece. The extension
piece can be used for screws that are difficult to reach.
F
E
3. OPERATION
Always observe the safety instructions and applicable regulations.
Use
Firmly hold the machine and ferm the bit with even pressure into the workpiece. Do not force the
machine. Use only bits that do not yet show any signs of wear. Worn bits have a negative effect
on the efficiency of the machine.
S
Locking the screwdriver
Fig. 8
The screwdriver is fitted with an automatic spindle lock feature. When the On/Off switch (2) is
not pressed, the spindle is locked. Now it is possible to use the screwdriver (even when the
battery is empty) as a manual tool.
SF
N
DK
Screwdriving
Fig. 1
To switch the tool on, press the On/Off switch (2).
Press the tumbler switch (R) for clockwise rotation (tightening screws)
Press the tumbler switch (L) for counterclockwise rotation (loosening screws)
To switch the tool off, release the on/off switch.
The LED (8) will go on, when the tumbler switch is pressed.
H
CZ
User tips for optimum use
•
Always hold the tool and screwdriver bit in a straight line with the screw and always use the
correct type and size of bit.
•
If screws are difficult to tighten, try applying a small amount of washing liquid or soap as a
lubricant (Fig. 9).
•
Use the spindle lock feature to loosen very tight screws or to firmly tighten screws.
•
When screwing in wood, it is recommended to drill a hole with a depth equal to almost the
length of the screw. Apilot hole guides the screw and prevents splintering or distortion of
the work piece.
PL
RU
GR
7
F
E
•
•
•
•
•
•
P
Put the adapter plug of the charger into the handle (underside).
Plug the mains adapter into the (wall) socket.
The charging process starts; the red LED is now on.
The battery is fully charged when the red LED goes out.
Charging the battery takes maximum 5 hours.
During the charging procedure, the handgrip of the machine warms up. This is normal.
I
S
5. MAINTENANCE
SF
This Kingcraft tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
N
DK
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly
clean the tool housing with a soft cloth, preferably after each use. Keep the ventilation slots free
from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage
the plastic parts.
Caution: looking directly at LED lights for a prolonged period of time within a short
distance may cause eye injury.
SL
NL
The charging procedure starts as soon as the plug of the battery charger is inserted into the
socket and the adapter plug is connected to the appliance (the underside of the handgrip).
P
I
Charging Li-ion battery
Fig. 10
The battery charger supplied is matched to the Li-ion battery installed in the machine. Do not
use another battery charger.
The Li-ion battery is protected against deep discharging. When the battery is empty, the
machine is switched off by means of a protective circuit: the tool holder no longer rotates.
Caution: if the On/Off switch is subject to continued use, the Li-ion battery can be damaged.
Kingcraft
H
CZ
Lubrication
The tool requires no additional lubrication.
SL
Faults
Should a fault occur, e.g. after wear of a part, please contact the address on your guarantee
card.
PL
Environment
In order to prevent the tool from damage during transport, it is delivered in a sturdy packaging.
Most of the packaging materials can be recycled. Take these materials to the appropriate
recycling locations.
RU
GR
Do not dispose of the power tool or the battery into household waste, fire or water.
Kingcraft
8