track english

Advanced Crushing Technology
Tracked
Crusher Range
The BL-Pegson Tracked Crusher Range has been
designed to maximise productivity in a wide range
of quarry, demolition and recycling applications.
Quarry • Demolition • Recycling
Metrotrak
900x600 (24”x36”)
l Rapid set-up time and ease of transportation.
l Well proven high performance 900mm x 600mm
(24”x36”) ‘M’ series single toggle jaw crusher.
l Heavy duty fabricated chassis and track frame.
l Remote control operation.
l Two step self cleaning Grizzly with underscreen option.
l
l
l
l
l
l
Fully skirted product conveyor.
Grizzly by-pass and fines chute.
Dust suppression sprays.
Dirt conveyor & magnetic separator fitted as standard.
Folding Hopper for transport (optional hydraulic folding).
Fuel efficient HFO (hydraulic) clutch as standard.
100
0
1
2
3
(inches)
4
5
6
7
8
Typical Plant Output
90
inches
mm
tph (U.S.)
mtph
80
CLOSED SIDE
SETTING
40mm (11/2”)
70
50mm
11/2”
40
85
75
2”
50
105
95
See
Notes
1
2 /2”
63
125
110
3”
75
135
120
4”
100
160
145
PERCENTAGE PASSING (%)
Closed Side Setting
(2”)
63mm (21/2”)
60
50
75mm
(3”)
100mm
(4”)
40
30
20
10
0
0
25
50
75
100
125
SCREEN MESH SIZE (mm)
150
175
200
Overall machine weight approximately 26 tonnes (28.5 US tons)
Notes: Crusher can only be operated at less than 50mm (2”) closed side setting with BL-Pegson Limited approval (i.e. on concrete and brick rubble). Capacities are typical only based on clean, dry, quarried hard limestone weighing loose approximately 1.6t/m3 (100lb/ft3).The feed should be well graded and of a size that will readily enter the mouth of the crusher chamber.The crusher has been designed
to work with feed materials having a 10% fines value not exceeding 390 kN. Crushing performance will vary with local conditions. For further advice contact your local dealer or BL-Pegson Ltd.
Premiertrak
1100x650 (26”x44”)
l Rapid set-up time and ease of transportation.
l High output and excellent reduction capability.
l Well proven high performance 1100mm x 650mm
(26”x44”) ‘M’ series single toggle jaw crusher.
l Heavy duty fabricated chassis and track frame.
l Remote control operation.
l Fully skirted product conveyor with hydraulic tail lift.
l
l
l
l
Folding Hopper for transport (optional hydraulic folding).
Two way dirt chute.
Dust suppression sprays.
Dirt Conveyor and Magnetic Separator fitted as
standard.
l Fuel efficient HFO (hydraulic) clutch as standard.
0
1
2
3
4
(inches)
5
6
7
8
9
100
See
Notes
Typical Plant Output
90
80
inches
mm
tph (U.S.)
mtph
2”
50
160
140
2 /2”
63
180
160
1
3”
75
210
185
4”
100
245
220
5”
125
280
250
PERCENTAGE PASSING (%)
Closed Side Setting
50mm (2”)
63mm (21/2”)
75mm (3”)
100mm (4”)
125mm (5”)
70
60
50
CLOSED SIDE
SETTING
40
30
20
10
0
0
25
50
75
100
125
150
SCREEN MESH SIZE (mm)
175
200
225
Overall machine weight approximately 47 tonnes (51.5 US tons)
Notes: Crusher can only be operated at less than 75mm (3”) closed side setting with BL-Pegson Limited approval (i.e. on concrete and brick rubble). Capacities are typical only based on clean, dry, quarried hard limestone weighing loose approximately 1.6t/m3 (100lb/ft3).The feed should be well graded and of a size that will readily enter the mouth of the crusher chamber.The crusher has been designed
to work with feed materials having a 10% fines value not exceeding 390 kN. Crushing performance will vary with local conditions. For further advice contact your local dealer or BL-Pegson Ltd.
Premiertrak
1100x800 (32”x44”)
l Rapid set-up time and ease of transportation.
l High output and excellent reduction capability.
l Well proven high performance 1100mm x 800mm
(32”x44”) ‘M’ series single toggle jaw crusher.
l Heavy duty fabricated chassis and track frame.
l Remote control operation.
l
l
l
l
l
l
Fully skirted product conveyor with hydraulic tail lift.
Hydraulically folding hopper fitted as standard.
Two way dirt chute.
Dust suppression sprays.
Optional Dirt conveyor.
Fuel efficient HFO (hydraulic) clutch as standard.
0
1
2
3
4
5
(inches)
6
7
8
9
10
11
100
Typical Plant Output
inches
tph (U.S.)
3 /2”
1
mm
90
230
mtph
210
4”
100
245
220
5”
125
280
250
6”
150
295
265
90
PERCENTAGE PASSING (%)
See
Notes
Closed Side Setting
80
CLOSED SIDE
SETTING
70
90mm (31/2”)
100mm (4”)
60
125mm (5”)
50
150mm (6”)
40
30
20
10
0
0
25
50
75
100
125
150
175
200
225
250
275
SCREEN MESH SIZE (mm)
Overall machine weight approximately 57.5 tonnes (63.4 US tons)
Notes: Crusher can only be operated at less than 90mm (31/2”) closed side setting with BL-Pegson Limited approval (i.e. on concrete and brick rubble). Capacities are typical only based on clean, dry,
quarried hard limestone weighing loose approximately 1.6t/m3 (100lb/ft3).The feed should be well graded and of a size that will readily enter the mouth of the crusher chamber.The crusher has been
designed to work with feed materials having a 10% fines value not exceeding 390 kN. Crushing performance will vary with local conditions. For further advice contact your local dealer or BL-Pegson Ltd.
428 Trakpactor
1067x711 (28”x42”)
l Rapid set-up time and ease of transportation.
l Well proven high performance 1067mm x 711mm
(28”x42”) impact crusher with manganese hammers.
l Heavy duty chassis and track frame.
l 2 step self cleaning Grizzly with under screen.
l Remote control operation.
l Two way dirt chute.
l Fully skirted product conveyor with heavy duty ‘rip
stop’ belt.
l Dust suppression sprays.
l Dirt conveyor & magnetic separator fitted as standard.
l Available with or without Grinding Path for Quarry
or Recycling (specify when ordering).
l Optional Chrome Hammers (specify when ordering).
100
Technical Information for Impactor
Rotor
Diameter
1067x711mm
1060mm
(28”x42”)
(42”)
Rotor
Speed
650rpm
approx (variable)
No. of
Hammers
4
PERCENTAGE PASSING (%)
Feed
Opening
Estimated Product Envelope
with Grinding Path Fitted.
90
80
Estimated Product Envelope
with Grinding Path Excluded.
70
60
50
40
30
Typical
Feed
Grading
20
10
500
400
300
200
175
150
125
100
75.0
63.0
50
40
28.0
20.0
14.0
10.0
6.30
5.00
3.35
2.36
1.70
850
1.18
600
425
300
212
0
150
- 150 - 350 tph
75
Plant Capacity
3280 (10’9”)
Overall machine weight approximately 31 tonnes (34 US tons)
3075 (10’1”)
3300 (10’10”) CTRS
7200 (23’8”)
Notes: Product curves shown are typical only, based on average limestone, and indicate the product gradings from the Impactor only. Any natural fines in the feed material which bypass the Impactor are not taken into account. Curves will vary dependant on nature, type and grading of the material being processed. Capacity shown is based on feed material
weighing loose, approximately 1.6t/m3 (100lbs/ft3) and indicates the throughput of the plant. For suitability of particular applications, please consult your local dealer or BL-Pegson Ltd.
Maxtrak 1000
Automax & Autosand Tracked Cone Crushers
l Unique design giving excellent product shape and high
l
l
l
l
l
l Feed Hopper and level controls included to ensure choke
reduction ratios.
No need for pre-screening on many applications
reducing cost and increasing profitability.
Self-contained diesel driven plant.
Metal detection fitted as standard.
3.5m high discharge conveyor.
Hydraulic crusher setting adjustment as standard.
AUTOMAX
CRUSHER
MODEL
1000 MC
Short Throw
MAXIMUM
FEED SIZE
MINIMUM
C.S.S.
mm
ins
mm
ins
160
61/4
16
5/8
1000 X.C.
Short Throw
195
1000 M.C.
Long Throw
160
1000 X.C.
Long Throw
195
71/2
61/4
71/2
AUTOSAND MAXIMUM
FEED SIZE
CRUSHER
MODEL
mm
ins
19
19
22
3/4
3/4
7/8
feed hence optimum shape.
l Rapid Set-up time.
l Choice of Concave and Eccentric Throw available on 1000
machines.
l Suitable for Aggregate Rail Ballast or Road-Base Production.
l Fuel efficient HFO (hydraulic) clutch as standard.
CLOSED SIDE SETTING AND APPROXIMATE CAPACITIES
CLOSED SIDE
SETTING
mm
ins
mm
ins
mm
ins
mm
ins
mm
ins
mm
ins
16
5/8
19
3/4
22
7/8
25
1
28
1 /8
32
11/4
M. tph
90 - 110
105 - 120
115 - 140
120 - 150
130 - 160
U.S. tph
100 - 120
115 - 130
125 - 155
130 - 165
140 - 175
M. tph
105 - 120
115 - 150
135 - 160
145 - 170
150 - 180
U.S. tph
115 - 130
125 - 165
150 - 175
160 - 185
165 - 200
M. tph
125 - 145
140 - 170
145 - 180
155 - 190
U.S. tph
135 - 160
155 - 185
160 - 195
170 - 210
M. tph
140 - 180
165 - 195
175 - 205
180 - 220
U.S. tph
155 - 195
180 - 215
190 - 225
200 - 240
CLOSED SIDE SETTING AND APPROXIMATE CAPACITIES
MINIMUM
C.S.S.
ins
mm
ins
mm
ins
CLOSED SIDE mm
SETTING
mm
ins
13
1/2
16
5/8
19
3/4
1000
Short Throw
63
21/2
13
1/2
1000
Long Throw
63
21/2
13
1/2
1
M. tph
70 - 100
80 - 110
85 - 125
U.S. tph
75 - 110
90 - 120
95 - 135
M. tph
U.S. tph
85 - 120
95 - 130
95 - 130
105 - 140
100 - 150
110 - 165
Capacities are based on actual test
data. If the feed varies from that
shown contact BL-Pegson for advice.
* For product curves see publication
AMB 200/1
Overall machine weight approximately 33 tonnes (36.4 US tons)
Notes: Capacities are typical only based on clean, dry, quarried limestone weighing loose approximately 1.6t/m3 (100lb/ft3) The feed should be well
graded and of a size that will readily enter the mouth of the crusher chamber. Crushing performance will vary with local conditions. For further advice contact your local dealer or BL-Pegson Ltd.
Premiertrak
Applications
1100x650 Premiertrak in land reclamation application.
Metrotrak working in a mining operation.
Metrotrak recycling brick rubble.
428 Trakpactor recycling concrete and asphalt
428 Trakpactor recycling construction and demolition waste.
Maxtrak 1000 sand and gravel application.
Maxtrak 1000 in quarry application.
Maxtrak 1000
Trakpactor
Metrotrak
1100x800 Premiertrak crushing blasted hard rock.
Advanced Crushing Technology
Your Local Authorised BL-Pegson Dealer:
BL-Pegson Ltd
Mammoth Street, Coalville,
Leicestershire, LE67 3GN. England.
Tel: +44 (0) 1530 518600.
Fax: +44 (0) 1530 518618
email sales@bl-pegson.com
www.bl-pegson.com
US Office:
11001 Electron Drive, Louisville,
Kentucky, 40299 USA.
Tel: (502) 736 5200
Fax: (502) 736 5202
All reasonable steps have been taken to ensure the accuracy of this publication,
however due to a policy of continual product development we reserve the right
to change specification without notice.
Publication No.Trak 3 / 2001/2