HARBOUR TUG 45 TON BOLLARD PULL

HARBOUR TUG
45 TON BOLLARD PULL
In November 2005 Remontowa S.A. and WUŻ-Shipping and Services Gdynia signed the contract for the construction and delivery of
a 45 ton BP Harbour- Coastal Tug.
The vessel delivered to the Owner in March 2007 was named Centaur II. The tug boat is one of the most active tug boats belonging
to the fleet of the Owner and has received many compliments from the crew and clients because of its parameters and abilities.
The vessel is used to carry out the tug services for cargo ships both within and outside the port. It includes assistance, towing, piloting
and all other tasks assigned for these types of vessels. Design and workshop drawings of the vessel were made by the Naval Engineering
& Design Ltd. belonging to REMONTOWA Group.
The tug boat represents state-of-the-art technology and complies with PRS notation  KM II L3 TUG. The hull of the vessel was reinforced
to meet ice class L3 requirements for tug boats operating in the Baltic Sea, in mean ice conditions.
Main dimensions of Centaur II are as follows: 30.30 m in length, 9.8 m in beam and 3.65 m in depth.
The vessel project is a tailor made one especially prepared to fulfil requirements of the harbour and sea going tug boats.
The vessel is powered by two CAT main engines - each 1425 kW, and two SCHOTTEL propellers both giving a 45 ton bollard pull and
13.3 knots speed. The vessel’s electric network is supplied by two 100 kW generator sets. One of the most attractive characteristics
of this tug boat is that, she achieves the same bollard pull when pulling astern as ahead. This is a result of specially designed hull form.
In addition, the tug boat is equipped with a 50 ton MAMPAEY towing hook responsible for towing operation mainly in harbour and
also at sea. The harbour tug is equipped with two towing bitts and two winches in aft and fore part of the vessel which are used
mostly at sea.
To decrease heating costs at port, a 100 kW oil burned boiler is assembled to heat up the sanitary water. Additional feature of the vessel
is an External Fire Fighting System capable of 250 m³/hr water-foam spray from a monitor assembled on the wheelhouse. Also a water
curtain is assembled on the main deck. All main systems are controlled locally and remotely from wheelhouse. Monitoring of engine
room machinery is installed on control desk in wheelhouse as well as in the machinery room.
Poland 80-958 Gdańsk Na Ostrowiu 1
tel (+4858) 307 23 10 fax (+4858) 307 23 20
e-mail: miroslaw.jasinski@remontowa.com.pl www.remontowa.com.pl
PRINCIPAL PARTICULARS
Length overall
30.30 m
Length waterline
29.60 m
Breadth moulded
9.80 m
Depth to main deck
4.85 m
Design draught
3.65 m
Draught max.
4.60 m
Deadweight
210 ton
Speed
13.3 kn.
Bollard pull
ab 45 ton Ahead
ab 44 ton Astern
Class
PRS KM II L3 TUG
CAPACITIES
Fuel oil
Water ballast
Potable water
Foam
Provision storage
COMPLETMENT
Crew (harbour/sea)
195.5 m³
46.7 m³
22.4 m³
5.2 m³
0.6 ton
5/8
PROPULSION / POWER SYSTEM
Type Output power CAT
Azimuth thrusters SCHOTTEL
Diesel – Rudderpropellers
2 x 1425 kW at 1600 rpm
2 x 2200 mm ducted propeller FP
DECK EQUIPMENT
Bow towing winch KRAAJEVELD
Brake force
Line capacity
15 ton on the 1st layer at 11m/min
100 ton
2x150 m of 44 mm
diam. line on splitted drum
Aft towing winch KRAAJEVELED
Brake force
Line capacity
15 ton on the 1st layer at 11m/min
150 ton
520 m of 48 mm diam. line on a drum
Towing hook MAMPAEY
50 ton capable of carrying
two synthetic ropes 100 mm each
NAVIGATION AND COMMUNICATION
GMDSS sea area A2 Radio Station SPERRY MARINE
DESIGN
Naval Engineering & Design Ltd, Poland according to design No. B 845
Poland 80-958 Gdańsk Na Ostrowiu 1
tel (+4858) 307 23 10 fax (+4858) 307 23 20
e-mail: miroslaw.jasinski@remontowa.com.pl www.remontowa.com.pl