PUBLIC AUCTION

PUBLIC AUCTION
Fabricating, Welding, Tool Room & Material Handling Equipment
Assets no longer required in the ongoing operations of:
OK Champion
4714 Sheffield Avenue
Hammond, Indiana 46327
SALE DATE: Thursday, September 27
INSPECTION: Wednesday, September 26, 2012
10:00 am CDT
10:00 am - 4:00 pm CDT
Cable Pulling Truck • Lathes • Press Brakes • Shears • Band Saws • Shape Cutter
Welders • Turret Lathes • Ironworkers • Broach • Drills • Mills • Grinders
Bridge Crane • Material Handling Equipment • Air Compressors • Trucks • Trailers
Vehicle Service Equipment • Factory Equipment • Office Equipment • MORE
New
2011
3100 Dundee Rd., Suite 915
Northbrook, Illinois 60062
Phone: 224.927.5300
sales@pplauction.com
www.pplauction.com
BID ONSITE
or ONLINE AT
Buyer’s Premium 15% Onsite, 18% Online
Indiana Auctioneer License Numbers: David Muslin License No. AU11000138, Joel Bersh License No. AU11000137
CABLE PULLING TRUCK
2011 International Dura Star 4300 Single-Axle Electrical Cable Pulling Truck, VIN 1HTMMAAN4BH385026,
MaxxForce International DT466 Diesel Power, Automatic Transmission, 14’ Steel Flat Bed,
OK Champion Model CP9800 Articulating Cable Puller with 180° Rotation - 25,000 lb. Winch, 2500’ - 1/2” Steel Cable Capacity (New)
New
2011
PPL Auction
Phone: 224.927.5300
www.pplauction.com
Mark Your
Calendar Now
Plan to Attend
or Bid Online
LATHES • PRESS BRAKES • SHEARS
Clausing Colchester 21” x 150” Engine Lathe, S/N 8/0073/03130 (1998),
3.5” Spindle Bore, 12” 3-Jaw Chuck, 18 – 1400 RPM, Carriage with Cross Slide & Tool Post, Tailstock, Steady & Follower Rests, Pan Bed
Bradford 20” x 126” Engine Lathe, S/N 6519, with 4-Jaw Chuck, Carriage with Cross Slide, Steady Rest, Tailstock, Pan Bed
Reed 18” x 68” Cone Head Engine Lathe
Pacific 200 Ton, 14’ x 1/4” Hydraulic Press Brake Model 200-14, S/N 2475, 14’ Overall, 24” Left Horn, 125” Between Housings, 8.5” Throat
48” Manual Apron Brake • Assorted Press Brake Dies
Niagara 12’ x 1/4” Power Squaring Shear Model JL-12, S/N 45426, 112” Left Squaring Arm, Front Support Arms, Manual Back Gauge, 20” Gap
Pexto 44” x 16 ga. Power Shear
BAND SAWS • SHAPE CUTTER • WELDERS
IF YOU CAN’T ATTEND
PLACE BIDS ONLINE AT
Armstrong-Blum-Marvel 18” Tilting Head Automatic Vertical Band Saw Series 81A8/M3M/M5, S/N E308888,
24” Power Stroker, Power Clamping, Coolant, Roll In & Outfeed Tables, Adjustable Manual Stop
Armstrong-Blum-Marvel 18” Tilting Head Vertical Band Saw Model 8M8, S/N 811316, 25” x 33” Table, Coolant
Armstrong-Blum-Marvel 18” Tilt Head Vertical Band Saw Series 8 Model 8/E1, S/N 86768, 25” x 31” Table • 36” Vertical Band Saw
Esab 7’ x 12’ 2-Torch Plasma / Oxygen Acetylene Shape Cutter,
Dry Cutting Table, with Esab ESP-100i Plasma Power Supply, ATAS Programmable Control Model ANC41-GRM (S/N 014937, 2001)
PPL Auction
Phone: 224.927.5300
www.pplauction.com
(15) Welders
Available
WELDERS • TURRET LATHES • IRONWORKERS
Hypertherm Powermax 1100 Plasma Cutting System, with Cable & Gun
(5) Miller 450 Amp Portable MIG Welders Model Deltaweld 452, with Cables & Wire Feed, (1) with Miller Dual Wire Feed
(5) Miller 450 Amp MIG Welders Model Deltaweld 451, with Cables, Gun with Wire Feed, Some with Boom & Wire Feed
Miller 300 Amp Portable TIG Welder Model Gold Star 300SS, with Foot Treadle & Flow Meter
(3) Miller 300 Amp Portable MIG Welders Model Millermatic 300, with Built-in Wire Drive
Atlas Welding 8” Bench Top Rotary Welding Positioner • Nederman Portable Welding Fume Collector
Warner & Swasey #5 Preselector Turret Lathe Model M2250, S/N 1587150, Bar Feed, 10” 3-Jaw, Carriage w/Cross Slide & Toolpost, Turret, Coolant
Warner & Swasey #5 Preselector Turret Lathe Model M1740, S/N 909713W, Bar Feed, 10” 3-Jaw, Carriage w/Cross Slide & Toolpost, Turret, Coolant
Warner & Swasey #3A Lever Head Turret Lathe Model M-1950, S/N 915134, 4.75” Spindle Bore, Carriage with Tool Post, Turret, Coolant
Hill Acme Hydraulic Ironworker No. 5, S/N 506155, with Coping, Angle & Bar Shearing, Punching Capability
Buffalo Ironworker Model 1-1/2-UTW, S/N 45U21448, with Coping, Angle, Bar & Plate Shearing, Punching Capability
BROACH • DRILLS • MILLS • GRINDERS
Oilgear 20 Ton Horizontal Hydraulic Broach Model XL20, S/N 49767, 48” Stroke, Coolant
Cincinnati Bickford 4’ Arm x 9” Column Radial Drill, S/N 1R1538, with T-Slot Base, Power Elevation, Box Table
Cincinnati Bickford 4’ Arm x 11” Column Radial Drill, S/N E35, T-Slot Base, 30” x 32” Table, Power Elevation
Central Machinery 20” Drill Press • Craftsman 20” Drill Press • Canedy Otto 20” Heavy Duty Drill Press, T-Slot Table
Canedy Otto 18” Drill Press • Delta 16” Drill Press • Milwaukee Magnetic Base Drill
Cincinnati Horizontal Mill Model 2MI, S/N 2J2U1S-115, 10” x 58.5” Table, Arbor with Support, Vertical Head, Coolant System
Jeico/Vernon Vertical Mill, S/N 6204, 6” x 21” Table • Oliver Drill Point Sharpener Model 60 • Cincinnati 12” Double End Snag Grinder
PPL Auction
Phone: 224.927.5300
www.pplauction.com
BRIDGE CRANE • MATERIAL HANDLING EQUIPMENT • AIR COMPRESSORS
TM Equipment Co. 3 Ton x 20’ Span Single Girder Underhung Bridge Crane w/ End Trucks, S/N 50537 (2000), P&H Hoist w/ Trolley & Pendant
Broderson 8000 lb. LP Carry Deck Crane Model IC8020, S/N 218021, 3-Section Telescoping Boom, Outriggers
Yale 7000 lb. LP Forklift Model L83C-070-SCS-077, S/N P238545, Solid Tires, Overhead Guard, 139” Lift of 2-Stage Mast
Toyota 4800 lb. LP Forklift Model 42-5FG25, S/N 405FGU25-78004, Solid Tires, Overhead Guard, 169” Lift, 3-Stage Mast, Side Shift, 3129 hrs.
Hough Payloader Rubber Tire Loader Model HM, 84” Bucket • (6) Assorted 33” x 140” Heavy Duty Material Transport Carts
10’ x 12’ Portable Adjustable Height Gantry, with Chain Hoist & Trolley
Devair, Inc. 15 HP Reciprocating Air Compressor Model VAVC-5000, S/N 35526-OF, with Pro-Dry Air Dryer & Vertical Air Receiver Tank
Speedaire 10 HP Dual 2-Stage Horizontal Tank Mounted Reciprocating Air Compressor Model 5Z402B, with Sullair Refrigerated Air Dryer
Quincy 10 HP Recip. Horiz. Tank Mounted Air Compressor Model QE-10-120, S/N 5010340
ATTEND OR
Speedaire 10 HP Horizontal Tank Mounted Air Compressor Model SZ402B (2001)
BID ONLINE AT
MISC. EQUIPMENT
Ridgid Power Chuck Model 1224, S/N EB19128-100, Cut-off, Threading, Reaming Accessories • PowR Pac 2-Hole Reach-in Blast Cabinet
(6) Assorted Welded Multiple-Tier Steel Storage Racks • Jancy 3” Horizontal Belt Sander Series 75X2000, S/N 28475, w/ Single End Table
4-Post Hydraulic Press, 14” x 15” Bed, Hydraulics • Williams & White Mechanical Bulldozer, 6” x 35” Ram
Dake Pedestal Compound Mandrel Press • Safety Kleen Parts Washing Station • (150) Sections 30” x 18” x 84” (est.) Storage Shelving
Aeroquip Bench Top Digital Hydraulic Hose Fitting Crimper • 6” Bench Top Hydraulic Hose Cut-off • Bench Top Paint Conditioner
TRUCKS • TRAILERS • VEHICLE SERVICE EQUIPMENT
2002 Chevrolet C2500 HD Extended Cab Pick-up Truck, VIN 1GCHC29U32Z127576, Gas, Automatic, Reese Gooseneck Trailer Ball Hitch in Bed
1994 Jeep Wrangler 4x4 2-Door Convertible, VIN 1J4FY19P7RP405506, Automatic, Meyer 6’ Snow Plow w/ Hydraulics & Dash Board Controls
90” x 140” Steel Deck Truck Stake Body, with Steel Sides
1994 International 91” x 20’ Wood & Steel Deck Gooseneck Equipment Trailer, VIN 1ZFGF2024RB004752, GVWR 14,000 lb., Flip Down Ramps
1988 BRW 76” x 16’ Wood Deck Tandem-Axle Equipment Trailer, VIN 0488124 • Miller 8’ x 16’ (est.) 3-Axle Wood Deck Equipment Trailer
Line-O-Tronics 8000 lb. 2-Post 4-Arm Hydraulic Vehicle Lift Model 3, with Hydraulics • FMC Digital Tire Balancing Machine
Model 502 Pneumatic Tire Mounting Machine • 1000 lb. Push Around Hydraulic Engine Lift
FACTORY EQUIPMENT • OFFICE
Factory Equipment including: Pallet Jacks, Hand Tools, Pallet Rack, Stacker Lift, Machine Vises, Drills, Taps, Reamers, Milling Cutters,
Double End Grinders, Inspection Equipment, Trash Containers, Benches, Bench Vises, Shop Carts, Shop Stools, Shop Fans, Safety Stairways,
Steel Horses, Hand Trucks, Tool Carts, Drill Presses, etc.
Contents of Administrative Offices including: Photocopier, Desks, Chairs, Computer Furniture, Tables, Computer Equipment, etc.
PPL
PPLAuction
Auction
Phone:
Phone:224.927.5300
224.927.5300
www.pplauction.com
www.pplauction.com
PUBLIC AUCTION
3100 Dundee Road, Suite 915
Northbrook, Illinois 60062
www.pplauction.com
OK Champion
4714 Sheffield Avenue
Hammond, IN 46327
SALE DATE: Thursday, September 27 10:00 am CDT
INSPECTION: Wed. September 26
10:00 am - 4:00 pm CDT
New
2011
ATTENTION: PLANT MANAGER
OR MACHINERY BUYER
PUBLIC AUCTION
OK Champion
SALE DATE: Thurs. September 27 10:00 am CDT
INSPECTION: Wed. September 26
Auction Terms & Conditions
REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer’s normal “Terms of Sale”, which
are available at the site or by request at 224-927-5300. A 15% Buyer’s Premium will be added to the final bid price. All bids are in US dollars. An
18% Buyer’s Premium will be added to online bids. Your bid is a contract: Place a bid only if you’re serious about buying the item. If you are the
high bidder, you will enter into a legally binding contract with PPL Auction.
PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, Bank
Check or Cashier’s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter from
your bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subject
to sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only.
10:00am - 4:00pm CDT
UNABLE TO ATTEND?
Bid online in real time at
ON-LINE BIDS SUBJECT TO 18% BUYER’S PREMIUM
VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty
or guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages.
Buyer agrees to accept assets purchased per standard auction terms, “AS IS, WHERE IS, WITH ALL FAULTS” WITHOUT ANY
REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIED
REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR
WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicle
to remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction has
completed and payment in full has been made.
ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser’s address on file after payment is received and cleared.
All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resold
by auctioneer, any loss incurred in the resale to be borne by the original buyer.
Scan
with
your
phone
to link
to our
website
3100 Dundee Road - Suite 915 • Northbrook, Illinois 60062
Ph: 224.927.5300 • Fax: 224.927.5311 • sales@pplauction.com
www.pplauction.com
Indiana Auctioneer License Numbers: David Muslin License No. AU11000138, Joel Bersh License No. AU11000137