gaS meterS - E-Gaz

G a s meters
from metering to data management
GAS meters
P roduct ran g e
GAS METERS
from METERING
to data management
Vision
Apator Group is one of the most important supplier in EMEA region in the development
and sales metering equipment and systems as well as switchgear equipment.
Mission
Be promoter and leading supplier of modern metering systems for utility services
and maintain the possition of important supplier on the market of low voltage
switchgear equipment.
Strategic objective
The establishment of strong technological group acting in metering
and switchgear segments based on strong brand of Apator and oriented
at the increase of sales on foreign markets.
from metering to data management
Apator Metrix
content
„„ exists from:
Established in 1948 (Pomeranian gas
meter factory) since 2004 is part of the
Apator Group
„„ Scope of business:
Diaphragm domestic, commercial
and industrial gas meter including
smart solutions.
„„ Certificates:
ISO 9001:2000, ISO 14001:2004
„„ Conformity to:
EN1359; 2004/22/EC (MID)
OIML R31/RC 71/318/EC
Residential and commercial gas meters
04
UG series___________________________________ 06
6G4L, 6G6___________________________________ 07
AM-G10, AM-G16_____________________________ 08
Industrial gas meters
10
2G25L______________________________________ 12
2G40L, 2G65L________________________________ 13
Smart gas meters
14
gas meters
Residential
and commercial
gas meters
with mechanical index
from metering to data management
110 / 130 mm
100 / 110 / 130 mm
152,4 / 160 mm
220 mm
000
130 mm
220 mm
250 mm
280 / 300 mm
Type
Maximum flow rate
m3/h
Minimum flow rate
m3/h
UG-G1,6
UG-G2,5
UG-G4
6G4L
6G6
AM-G10
AM-G16
2,5
4
6
6
10
16
25
0,04
0,06
0,1
0,16
0,016
0,016/0,025
0,016/0,025
/0,040
Nominal flow rate
3
m /h
1,6
2,5
4
4
6
10
16
Cyclic volume
dm3
1,2
1,2
1,2
2,2
2,2
5
5
Max working pressure
bar
0,5
0,5
0,5
0,5
0,5
0,5
0,5
Index max indication
m3/h
99999,999
99999,999
99999,999
99999,999
99999,999
999999,99
999999,99
Starting flow rate
dm3/h
3
5
5
5
8
13
13
bar
0,1
0,1
0,1
0,1
0,1
Fireproof up to 650 ºC
according to EN 1359
Thread
Threaded connections may be manufactured acc. to any international norm
(ISO; ANSI; British Standard etc.....)
5
gas meters
UG series
Ug series gas meters are designed for measurement of gas supplied
to appartments where sonsumption of gas is equivalent of 2,5 m3/h
(G1,6), 4 m3/h (G2,5) and 6 m3/h (G4) of air density of 1,2 kg/m3.
UG series
The gas meters can be used for measurement of:
„„ Natural gas
„„ City gas
„„ Propane-butane gas
Gas meter is equipped with pulse magnet as standard. Pulse
transmitter can be added at any time (1 imp = 0,01 m3).
Table 1. Technical Data
UG-G1,6
UG-G2,5
Maximum flow rate
m3/h
2,5
4
UG-G4
6
Minimum flow rate
m3/h
0,016
0,016/0,025
0,016/0,025/0,040
Nominal flow rate
m3/h
1,6
2,5
4
Cyclic volume
dm3
1,2
1,2
1,2
Max working pressure
bar
0,5
0,5
0,5
Index max indication
m3/h
99999,999
99999,999
99999,999
Starting flow rate
dm3/h
3
5
5
bar
0,1
0,1
0,1
Fireproof up to 650 ºC according to EN 1359
Dimensions
A
[mm]
B [mm]
Variant
I
Variant
II
C [mm]
Variant
I
Variant
II
D [mm]
Variant
I
Variant
II
E [mm]
Variant
I
Weight
Variant
II
100
–
200
–
205 to 211
–
161
–
70
1,7 kg
110
216
200
214
205 to 211
167
161
67
70
~ 2,0 kg
130
216
200
214
205 to 211
167
161
67
70
~ 2,0 kg
152,4
235
–
268
–
177
–
73
–
~ 3,0 kg
160
235
–
240
–
177
–
73
–
~ 3,0 kg
220
283
–
222
–
176
–
72
–
~ 2,0 kg
Curves of Typical error and Pressure loss
UG-G1,6
UG-G2,5
UG-G4
3
3
2
2
2
1
1
1
0
0
EN1359 /OIML R31
-1
-2
-3
3
-2
71/318/EWG
0
0,5
1
1,5
2,5
2
2.0
1.5
1
1.0
-3
-2
71/318/EWG
1
0
2
0
0,5
1
1,5
2
2,5
4
3
-3
71/318/EWG
0
2.0
2.0
1.5
1.5
1
2
3
4
5
6
1
1.0
1
2
2
1
2
EN1359 /OIML R31
-1
1.0
2
0.5
0
0
EN1359 /OIML R31
-1
0.5
0
0.5
0
1
2
3
4
0
0
1
2
3
4
5
6
from metering to data management
7
6G4L, 6G6
The gas meter 6G4L and 6G6 is designed for measurement of gas
supplied to appartments where maximum consumption of gas is
equivalent of 6m3 (G4) and 10m3 (G6) of air density of 1,2 kg/m3.
The gas meters can be used for measurement of:
6G4L, 6G6
„„ Natural gas
„„ City gas
„„ Propane-butane gas
Gas meter is equipped with pulse magnet as standard. Pulse
transmitter can be added at any time (1 imp = 0,01 m3).
Table 3. Technical Data
6G4L
6G6
Maximum flow rate
m3/h
6
10
Minimum flow rate
m3/h
0,04
0,06
Nominal flow rate
m3/h
4
6
Cyclic volume
dm3
2,2
2,2
Max working pressure
bar
0,5
0,5
Index max indication
m3/h
99999,999
99999,999
Starting flow rate
dm3/h
5
8
bar
0,1
0,1
Fireproof up to 650 ºC according to EN 1359
Dimensions
A [mm]
B [mm]
C [mm]
78
3,0 kg
130
231
276
187
78
3,4 kg
220
326
286
190
79
3,4 kg
250
326
276
190
79
3,4 kg
3
2
1
1
0
0
-2
-3
-2
71/318/EWG
0
1
2
3
4
6
5
-3
71/318/EWG
0
2
4
6
8
10
2.0
2.0
1.5
1
1.5
1
1.0
2
1.0
2
0.5
0.5
0
EN1359 /OIML R31
-1
EN1359 /OIML R31
0
0
1
2
3
4
5
6
Weight
187
2
-1
E [mm]
289
6G6
3
231
Curves of Typical error and Pressure loss
6G4L
D [mm]
Single pipe
0
1
2
3
4
5
6
gas meters
AM-G10/AM-G16
AM-G10/AM-G16
The gas meters AM-G10 and AM-G16 are designed for measurement of gas supplied to commercial and industrial gas meters
where maximum consumption of gas is equivalent of 16 m3
(G10) and 25m3 (G16) of air density of 1,2 kg/m3.
The gas meters can be used for measurement of:
„„ Natural gas
„„ City gas
„„ Propane-butane gas
Gas meter is equipped with pulse magnet as standard. Pulse
transmitter can be added at any time (1 imp = 0,1 m3).
Table 4. Technical Data
AMG 10
AMG 16
Maximum flow rate
m3/h
16
25
Minimum flow rate
m3/h
0,1
0,16
Nominal flow rate
m3/h
10
16
Cyclic volume
dm3
5
5
Max working pressure
bar
0,5
0,5
Index max indication
m3/h
999999,99
999999,99
Starting flow rate
dm3/h
13
13
bar
0,1
0,1
Fireproof up to 650 ºC according to EN 1359
Dimensions
A [mm]
B [mm]
C [mm]
6,8 kg
300
395
345
214
93
6,8 kg
2
2
1
0
-2
-3
0
4
8
EN1359 /OIML R31
-1
-2
71/318/EWG
16
12
3.0
-3
71/318/EWG
0
5
10
15
25
20
3.0
1
2.5
2.0
2
2.0
1
2
1.0
1.5
1.0
0.5
0
0
4
8
12
16
Weight
93
1
EN1359 /OIML R31
E [mm]
214
3
0
345
AMG 10AMG 16
-1
D [mm]
395
Curves of Typical error and Pressure loss
3
280
0
0
5
10
15
20
25
from metering to data management
Innovative index
Innovative index
with innovative protection
against fraud
Place for applying
an ordinary seal (optional)
New generation solution
for seal (stamp from inside)
Index blockade
Applying (or not applying)
decides, if the index is
disassemblable
or non-disassemblable
9
gas meters
Industrial gas meters
with the mechanical index
from metering to data management
Type
2G25L
2G40L
2G65L
Maximum flow rate
m3/h
40
65
100
Minimum flow rate
3
m /h
0,25
0,40
0,65
Nominal flow rate
m3/h
25
40
65
Cyclic volume
3
dm
20
65
65
Max working pressure
bar
0,2
0,2
0,2
Index max indication
m3/h
999999,99
999999,99
999999,99
Starting flow rate
dm /h
20
32
32
3
11
gas meters
2G25L
The gas meter G25 is designed for measurement of gas supplied to industrial plants where maximum consumption of gas
is equivalent of 40m3/h of air of density of 1,2 kg/m3.
„„ Natural gas
„„ City gas
„„ Propane-butane gas
Gas meter is equipped with pulse magnet as standard. Pulse
transmitter can be added at any time (1 imp = 0,1 m3).
Table 6. Technical Data
2G25L
Maximum flow rate
m3/h
40
Minimum flow rate
m3/h
0,25
Nominal flow rate
m3/h
25
Cyclic volume
dm3
20
Max working pressure
bar
0,2
Index max indication
m3/h
999999,99
Starting flow rate
dm3/h
20
bar
0,1
Fireproof up to 650 ºC according to EN 1359
Dimensions
A
E
D
A [mm]
335
C
2G25L
The gas meters can be used for measurement of:
B [mm]
538
B
Curves of Typical error and Pressure loss
2G25L
3
2
1
0
EN1359 /OIML R31
-1
-2
-3
71/318/EWG
0
10
20
30
3.0
40
1
2
2.0
1.0
0
0
10
20
30
40
C [mm]
520
D [mm]
308
E [mm]
151
Weight
30 kg
from metering to data management
13
2G40L, 2G65L
The gas meters 2G40L and 2G65L are designed for measurement of gas supplied to industrial plants where maximum consumption of gas is equivalent of 65 m3 (G40) and 100 m3 (G65)
of air density of 1,2 kg/m3.
2G40L, 2G65L
The gas meters can be used for measurement of:
„„ Natural gas
„„ City gas
„„ Propane-butane gas
Gas meter is equipped with pulse magnet as standard. Pulse
transmitter can be added at any time (1 imp = 0,1 m3).
Table 7. Technical Data
2G40L
2G65L
Maximum flow rate
m3/h
65
100
Minimum flow rate
m3/h
0,40
0,65
Nominal flow rate
m3/h
40
65
Cyclic volume
dm3
65
65
Max working pressure
bar
0,2
0,2
Index max indication
m3/h
999999,99
999999,99
Starting flow rate
dm3/h
32
32
bar
0,1
0,1
Fireproof up to 650 ºC according to EN 1359
Dimensions
437
720 ±2,5
666
ø100
ø 145
A [mm]
ø 18
Kołn ierz
ruchomy
560
796
ø 205
214
B [mm]
720
C [mm]
601
796
437
ø170
362
601
Curves of Typical error and Pressure loss
2G40L
2G65L
3
3
2
2
1
1
0
0
EN1359 /OIML R31
-1
-2
-3
-2
71/318/EWG
0
10
20
30
EN1359 /OIML R31
-1
40
50
60 65
-3
71/318/EWG
0
3.0
3.0
2.0
2.0
40
20
80
60
100
1
2
1
1.0
22
0
0
10
20
30
40
50
60 65
1.0
0
0
10
20
30
40
50
60
70
80
D [mm]
90 100
E [mm]
214
Weight
90 kg
gas meters
Smart gas meters
with the remote reading
They were designed for use within AMR and AMM systems, which will be beyond
any doubt commonly developing in coming years.
Gas meters fulfill conditions of valid norms and European standards, and for last
years have been installed in EU countries in smart metering implementation process.
Actually they are the most innovative products in their class in the market.
from metering to data management
110 / 130 mm
100 / 110 / 130 mm
000
152,4 / 160 mm
220 mm
220 mm
250 mm
130 mm
280 / 300 mm
UNIFO SERIES
Type
Maximum flow rate
m /h
3
G1,6S
G2,5S
G4S
G4S
G6S
G10S
G16S
2,5
4
6
6
10
16
25
0,04
0,06
0,1
0,16
4
6
10
16
Minimum flow rate
m3/h
0,016
0,016 /
0,025
0,016 /
0,025/
0,04
Nominal flow rate
m3/h
1,6
2,5
4
Cyclic volume
3
dm
1,2
1,2
1,2
2,2
2,2
5
5
Max working pressure
bar
0,5
0,5
0,5
0,5
0,5
0,5
0,5
Index max indication
m3/h
99999,999
99999,999
99999,999
99999,999
99999,999
999999,99
999999,99
Starting flow rate
dm3/h
3
5
5
5
8
13
13
bar
0,1
0,1
0,1
0,1
0,1
Fireproof up to 650 ºC
according to EN 1359
Thread
Threaded connections may be manufactured acc. to any international norm.
(ISO; ANSI; British Standard ect...)
15
gas meters
Uniflo series
„„ Error curve correction allows for ±0,5% accuracy in full
measurement range (standard requirement is ±1,5%)
„„ Built-in electronic temperature conversion
„„ Built-in valve for remote closing and safe opening of
gas flow
„„ Data communication: wired or radio
„„ Data log of readings, alarms and events
„„ Standard IR interface for service (EN62056-21)
„„ Flexibility
–– replaceable option board for communication
–– software upgrade function
„„ Safety
–– tamper protection and detection
–– encryption AES-128
–– data log: hourly, daily and monthly
„„ Reliabilty
–– optical detection of measuring unit
–– resistance to interference of neodymium magnets
–– resistance to interference in index housing
–– index battery lifetime min. 10 years (calculated for
20 years)
Certificate 2004/22/EC (MID)
Compliance with norms: EN1359:1998 with annex B,
EN1359-A1:2006, NTA 8130:2007
DSMR 2.2 (Netherlands), EN12405 (electronic index),
OIML D11 (EMC) (electronic index)
Dimensions
Vc [dm3]
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]
Weight
100
216
214
154
67
~ 2,0 kg
110
216 / 200
214 /
205 to 211
160 / 154
67 / 70
~ 2,0 kg
130
216 / 200
214 /
205 to 211
160 / 154
67 / 70
~ 2,0 kg
152,4
235
268
170
73
~ 3,0 kg
160
235
268
170
73
~ 3,0 kg
220
283
222
169
72
~ 2,0 kg
Single pipe
231
289
180
78
3,0 kg
130
231
276
180
78
3,4 kg
220
326
286
183
79
3,4 kg
250
326
276
183
79
3,4 kg
280
395
345
207
93
6,8 kg
300
395
345
207
93
6,8 kg
D
A
E
1,2
C
Uniflo series
Main features
B
2,2
5
Curves of Pressure loss
G1,6S | (1,2 dm3)
G2,5S | (1,2 dm3)
2.0
1.5
1
1.0
2.0
2.0
1.5
1.5
1.0
2
2
0
0,5
1
1,5
2
2,5
1
1.0
1
2
2
1
0.5
0
G4S | (1,2 dm3)
0.5
0
0.5
0
1
2
3
4
0
0
1
2
3
4
5
6
from metering to data management
G4S | (2,2 dm3)
G6S | (2,2 dm3)g10S | (5 dm3)
2.0
2.0
1.5
1.0
1
1.5
2
1.0
1
2
3.0
2.0
1
2
0.5
0
1
4
3
2
6
5
0
0
0
1
2
3
4
5
6
0
4
8
12
16
G16S | (5 dm3)
3.0
1
2.5
2
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
New electronic index
The new electronic index offers compact and smart design, innovative features - and is prepared for future requirements and international standards.
Display: 9 digits, 0, 3 or 4 decimals (configurable)
Alarm log
Uniflo G4S electronic index has an auto diagnostic system, monitoring the conditions of the meter:
„„ Remaining life of battery
„„ Gas temperature, low and high limit*
„„ Temperature sensor error*
„„ High and high-high flow limit
„„ Gray-Code detection error
„„ Daily max. consumption error
„„ Self check error (hardware and software)
„„ Tamper detection (mechanical, magnetic)
30 latest alarms are stored with time stamp.
*) Only for meter with temperature conversion
Uniflo series
1.0
0.5
0
17
gas meters
independent of the inlet gas temperature and the
ambient temperature. Correct measurement of gas
temperature improves the accuracy with up to 3%.
Gray-code detection system
Uniflo series
Tamper proof
The movement of the gas measuring unit is detected
by a unique, High Frequency optical detection system, based on Gray-Code and 3 optical sensors on
the PCB. This system offers high resolution, tamper
proof ness and failsafe detection, fit for instant flow
calculation and error curve correction.
Excellent accuracy
Final error code
after correction
Correction by
linear interpolation
Original meter
error curve
Mechanical tampering of the index is not possible, as
moving parts in the index are reduced to a minimum.
Removal of front cover will activate tamper alarm. The
gas meter is not sensitive to normal magnetic fields.
In case of extremely powerful magnets, a magnetic
tamper alarm will be activated.
Communication is secured by encryption (AES compatible) with individual encryption keys, and by detection of invalid communication format, activating
alarm.
Reverse gas flow will be stopped by mechanical lock
in measuring unit, and reverse rotation will be detected by the “Gray-Code” and immediately activate an
alarm. Also exceeding max. flow limit, or max. daily
consumption limit will activate alarm.
Alarms will be stored in the memory, with time
stamp, to be transferred at the next meter reading,
or immediately, when radio is used. Alarms can be
reset remotely.
Integrated valve (option)
The initial error curve of the diaphragm gas meter is
programmed into the micro-processor in the index at
3 flows: Qmin, 0.2 Qmax and Qmax.
With the High Frequency Gray-Code detection, flow is
calculated and consequent error by linear interpolation. The error curve of
the measuring unit is corrected to approx. 0.1%.
Temperature conversion (option)
Temperature conversion may be performed for read
out of base volume or energy. A unique temperature
measurement system ensures a precise measurement of gas temperature inside the measuring unit,
The meter may be supplied with built-in valve, offering remote closing of the gas flow after receiving the
signal from back office.
Because opening of gas valve may have important
safety impacts (e.g. an opened unsecured gas cooker), Flonidan has developed a dedicated procedure
both in hardware and software. After the communication unit has given the signal “Open valve”, customer
may have to push a button on the index to reopen the
valve (see flow chart “Open indirect”).
If the meter after opening detects, within a given time
frame, too high gas flow, the valve will automatically
close again. Customer must first shut off gas consuming devices, before pushing the button again.
Time frame and max. gas flow can be configured on
customer specifications (See flow chart).
Command for safe opening without customer intervention is also available (see flow chart “Open direct”)
from metering to data management
Close
Open direct
Open indirect
Communication Unit
gives command
to close gas-valve
Communication Unit gives
command for direct opening
of gas-valve
Communication Unit gives
command to indirect
opening of gas-valve
LCD changes between:
„PRESS” and counter value
Customer checkes on
open gas-cooker etc.
Gas-valve is closed
Customer pushes Button
on Index
LCD indicates „ERROR”
for 10 seconds
LCD indicates: „OPENS”
and gas-valve opens halfway
Wait for pipe filling
Wait for Flow control
Valve opens fully, LCD indicates counter value and the
customer has gas again
NO
YES
Flow to hight?
Gas-valve closes
AMR (Automatic Meter Reading)
The meter may be supplied with M-bus, wired (EN-13757-2) (standard with 2m cable) or wireless (EN13757-4).
Exemplary configuration scheme of AMR system is shown below.
Configuration and cost of the system depend on location of gas meters and technical requirements of the
customer, therefore please contact our sales department to receive the suitable offer.
Uniflo series
LCD changes between:
„NO GAS” and counter value
19
Apator Metrix S.A.
ul. Piaskowa 3, 83-110 Tczew, Poland
tel. +48.58 53 09 200, fax +48.58 53 09 300
metrix@metrix.pl
Switchgear
water
meters
heat
meters
Mining
equipment
gas
meters
Automation
sensors
www.apator.eu
IT Systems
metering
solutions
EN.00004/2010
electricity
meters
Surge
Arresters