AVO Subaru Parts lineup

57 TAUNTON DRIVE CHELTENHAM, MELBOURNE, VICTORIA 3192
TEL: +61 (0) 3-9584-4499 FAX: +61 (0) 3-9584-4008
57 TAUNTON DRIVE CHELTENHAM, MELBOURNE, VICTORIA 3192
TEL: +61 (0) 3-9584-4499 FAX: +61 (0) 3-9584-4008
Impreza WRX & STI
Legacy GT
New! USDM Legacy GT Ballbearing turbochargers!
AVO is proud to announce our new line of bolt-on ballbearing turbochargers for the USDM Legacy GT. These
high-response turbochargers breath new life into the 2.5liter turbo motor. Oil and water supply lines are a feature
of our turbos for OEM levels of longevity.
AVO 400 Type L • LEG-1270-000
AVO 450 Type RS • LEG-1300-000
AVO 500 Type D • LEG-1330-000
Bolting on parts can do more harm than
good without engine management!
AVO's SMT Subcom should be your first
stop when building for power!
AVO-SUB-500
New! Liberty TMIC!
After intensive R&D, AVO is proud to
present our top mount intercooler
upgrade for the Liberty GT turbo. This
bar and plate intercooler increases
response, suffers less pressure drop
than stock, and helps cooling on
those hot summer days!
LEG-1343-300
High-flow Cat Front Pipe
Blow Off Valve
We utilize the latest technology
in light-weight internal valving to
ensure optimum blow-off
response at all times.
This 50/50 recirc/vent
BOV is a bolt-on solution.
Our 76mm stainless steel front pipe and high-flow
sports catalytic converter is designed to bolt right in,
replacing your highly restrictive standard front pipe
with this state-of-the-art system, reducing
back-pressure and enhancing the
performance of your turbo.
LEG-2005-500
AVO-060
Power Air Intake
AVO's new "Flow Series" power filter has a top
feed intake and specially woven filter material
design to provide extra flow over other brands.
With the AVO cast aluminum
adapter bolting directly to
the air flow meter, it
makes for an extremely
easy installaion.
AVO knows Subaru like nobody else. From the day the turbocharnged flat
fours have been here, we have been applying our 34+ years of experience
making them go faster. From our unique turbochargers to intercoolers to
suit any power level, we've done it. AVO turboworld is an industry leader
in the field of turbosystem design and manufacturing.
Our engineering philosophy is unique in our focus on efficiency instead of relying on dangerously high boost
pressures. Our four tenets explain it all: optimising intake systems, opening up the exhaust, creating the best
possible intercooler, and then joining the whole package together with state of the art engine management that
is never miss-matched for the application.
Thousands of hours of have been spend designing, testing, and developing our range of WRX and STI
performance parts. Much of that time is spent on possibly the most important aspect of them all - ensuring that
all turbosystem parts integrate seamlessly with the stock engine, transmission, and electronics package.
Our Subaru Performance Programmes simply are without rival when it comes to design integrity, quality of
workmanship and materials used. When correctly chosen and fitted properly, you will experience significant
power increases that are also a pleasure to drive. And with proper servicing and maintenance, it will remain so
for many years of trouble-free operation.
AVO Edge Series Ball-Bearing Turbochargers
You want that extra edge at the races? AVO's famous Edge series ball-bearing turbochargers.
Time-tested and proven worldwide, they come in every size that you would need. Supplied
world-wide for street and race applications, you won't find a turbocharger offering better
performance, response, and driveability. Water and oil-cooled for maximum reliability under
all conditions.
LEG-1630-000
Gauge holder
Pod-style 52mm gauge holder.
Stainless Steel Centre Pipe
LEG-2005-098LH
Improve your mid-range and overall power with our
76mm full stainless steel center pipe. Improves one
of the biggest restrictions in the Legacy exhaust
system!
Boost Actuator
LEG-3005-300
An AVO actuator endows the factory
turbo with more solid boost response, also
ensuring that boost is maintained at a preset level. This results in increased torque
and power with high levels of response.
LEG-060
Panel Air Filter
Designed for a drop in
solution for better, safe air
flow. It doesn't get any easier
than this!
LEG-PAN-000
Remove the roll and increase your stability
with these ARB upgrades!
REAR: LEG-ADJ-021R
300
260
Suspension Bushes
See our website for more details! Polyurethane
bushings to take the wobble out of your ride!
250
ALL Models
200
220
Put a pair of high-flow AVO mufflers on the back of
your Legacy and experience the power difference!
Stainless steel system improves powe across the
band, and looks great as well!
LEG-3005-500
180
150
140
100
Stabilizer End Links
FRONT: LEG-ADJ-022F
340
HP: AVO
HP: Stock
350
300
High-Flow Mufflers
Stabilizer bars
HP
Torque: AVO
Torque: Stock
Our newly designed end links help control pitch
and dive, plus minimises body roll during hard
cornering.
FRONT: AVO26
REAR: AVO26
www.avoturboworld.com
AVO 320 Type S
AVO 400 Type L
AVO 400 Type S
AVO 450 Type RS
AVO 500 Type D
• WRX-1220-000
• WRX-1270-000
• WRX-1275-000
• WRX-1300-000
• WRX-1330-000
1000
2000
3000
4000
5000
www.avoturboworld.com
6000
7000 rpm
To rq u e
SMT Subcom
Subaru GDA/GDB Pure Power Packages
SMT Subcom
Top Mount Intercoolers
Bolting on parts can do more harm than good without proper
engine management! The AVO SMT
Subcom should be your first stop
when building for power!
Our bar and plate designs are the best in the
industry! High flow, low pressure
drop and large cooling capacity
all add up to more power for
you, especially on hot
summer days.
Front Mount Intercoolers
The best setup for developing big power
reliably by keeping your air charge cool
under all conditions. Designed specifically
to fit for your WRX and STI, with
very little pressure drop and
huge air cooling capacity.
WRX • WRX-1344-250
STI • STI-1344-000
WRX • AVO-SUB-000
Stand-alone ECU solutions
Our stand-alone solutions give you full
control over all engine parameters,
allowing you to tune for
maximum performance
for all types of
competitive racing.
Exhaust Manifold
AVO 4-1 extractors deliver increased power
and torque via full stainless, mandrel bent,
purged tig welded construction.
Simply bolt the manifold in
place, and you will feel the
AVO difference!
All Models
Electronic Boost Controller
The AVO Electronic Boost Controller (EBC) is a fully
electronic boost pressure controller designed to tightly
control and adjust the boost pressure delivered
to the intake manifold.
Suitable for factory or
aftermarket turbo systems
using either a swing or poppet
valve actuator.
WRX • AV0-001
Our speed cut controller is extremely
easy to install and comes with
easy to follow instructions.
WRX • AVO-026
Knock Link with Outrigger
Make sure your engine is safe with our knock-detecting
KnockLink with outrigger display.
This 'Flow Series' power filter has a top feed
intake and a specially woven filter material
design which provides extra flow and
protection over other brands. With the
AVO cast aluminium adaptor bolting directly
to the air flow meter, it makes for an
extremely easy installation.
WRX & STI • WRX-1630-000
WRX • WRX-1001-2001
Cast Turbo Outlet
Our cast outlet for the WRX and STI
incorporates a splitter to deflect
wastegate gases, improving turbo
spool up. Together with our AVO
Edge turbochargers we now
offer the worlds most potent
'Emissions Legal' WRX turbo/
downpipe combination.
WRX • WRX-1005-000
Speed Cut
Power Air Filter
Panel Air Filter
Our flat panel air filters are a simple and elegant upgrade for
your intake system, flowing better
than stock while maintaining
high levels of protection.
WRX & STI • WRX-PAN-000
High-flow Intake Pipe
SS Front Pipe
Our cast outlet/stainless steel front pipe combo with it's
76mm high-flow sports cat converter, piping, and flanges
simply replaces the highly restrictive factory system,
reducing back pressure and restoring power and
turbocharger response. This is the real deal
for top-end high performance race use
while still being emissions legal on
the street.
This high-flow intake pipe of AVO turboworlds
own design offers 30% better flow than the
stock system and is much stronger, a necessity
when going for higher boost
levels. Increasing flow to the
turbocharger aids throttle
response and performance.
WRX & STI • WRX-3120-000
STI • STI-2005-500
STI & WRX • LINK-085-1
WRX • WRX-2005-500
Turbo Up-pipe
'Cat-less' up-pipe for those interested in serious
performance. Off-road and track applications only.
Blow Off Valve
We utilise the latest technology in
lightweight internal valving to ensure
optimum blow-off response at all
times. AVO BOVs are designed to
replace the factory part by
retaining the return tube,
keeping the computer happy.
An additional vent to send hot
air to atmosphere is designed
in as well.
WRX & STI • WRX-2009-2001
Exhaust - Cat Back
Designed and manufactured to provide unrestricted flow
while absorbing high frequency exhaust notes.
WRX-2001-008
Carbon Fibre Cold Air Box
Our own design, this carbon fibre adds a bit
of WRC style to your engine bay as well as
keeping your intake air cooler
by isolating your air filter
from the hot engine bay.
Highly recommended
to go with the AVO Power
Air Filter kit.
WRX & STI • WRX-CFAK-300
STI: STI-060
Manufactured from super high quality silicon, Samco hoses
withstand high boost pressure
and temperatures,
making them a must for
racing applications.
Available in Red or Blue.
Carbon Fibre Air Box Lid
AVO has developed a range of high
quality carbon fibre replacement
parts that not only improve the
aesthetics of your engine bay
to show level, they also are
lighter than stock, improving
overall performance.
WRX: WRX-060
AVO's high-flow fuel pump is a direct
bolt-in, extremely quiet, and delivers
210lt per hour @ 45psi.
High-Flow Injectors
Our 660cc and 800cc Fuel injectors
offer exeptional flow while retaining
the same resistance as a factory
injector. Choosing the correct
injector for an application
ensures the engine always
has enough fuel to meet
the demands of high boost.
Radiator Hoses
High quality hoses to
the radiator,
available in Red or Blue.
WRX & STI •
WRX-TCS135C
800cc • WRX-INJ-8004
660cc • WRX-INJ-6604
Gauge Holder
Hi-pressure Parallel
Fuel Regulator Kit
Our gauge pods take a 52mm
or 2" gauge. Sits discretely in
the corner of the dash for
a true 'factory' look.
AVO's fuel regulator system is
designed to give equal fuel
distribution to your fuel rails and
also allows for you to increase your fuel
pressure for a more reliable
fuel supply.
WRX • WRX-2001-096
Boost Gauge
Intercooler Water Spray
This waterspray kit utilises the
factory washer bottle spray
switch, the control unit is
located near the driver,
and is comes with 2 to 30
second spray adjustment.
AVO-077
WRX • WRX-2001-016
Multi-function Meter
This integrated multi-function digital turbo monitoring system
reads turbo boost, but also engine air intake temperature and
engine coolant temperature. In addition to this it can be
configured to automatically trigger and run intercooler system
water sprays. Note: can be ordered in psi or bar.
AVO-079
Suspension Bushings
See our website for details.
For all your suspension
bushing needs. Our
polyurethane bushings
take the waffle out
of your setup.
Short Shift with Bushing
Breather Tank Kit
WRX & STI-WRX-096
Billet Steel Flywheel
High rpm, high output engines
don't only deserve, they
demand this one-piece,
lightweight billet steel
flywheel upgrade, a
must for any serious racer.
WRX-050
Billet Con-rods
Heat-treated chrome-moly I-beam connecting rods designed
for the late night street guy or full-on circuit racer. Big
boost, big turbos, and
big revs can have a
devastating effect on
the stock Subaru
con-rods.
WRX-FUEL-PARALLEL
AVO's 52mm boost gauge is whitefaced with green backlighting.
Monitors boost up to 1.4 bar.
When you fit a larger turbo or simply increased your boost,
you raise the chances of blow-by, a phenomenon whereby
misted oil is pumped out of the breathers and back through
the engine's induction system.
This can even affect stock
systems. Our Oil Breather Tank
kit prevents the oil from
re-entering the system, reducing
the possibility of detonation.
WRX & STI • WRX-2001-065
WRX & STI • WRX-2001-ABL
High-flow Fuel Pump
AVO's specially developed clutch
for 5-speed Subaru's.
Suitable for applications
from mild to wild without
compromising pedal feel
and weight throw by
maintaining the stock
pivot point.
WRX & STI •
WRX-PUM-003
WRX & STI •
WRX-TCS-168
This carbon fibre air intake gives your engine bay that WRC
look while increasing the
amount of cold air
available to your
intake system.
WRX & STI • WRX-2001-AP
WRX & STI • WRX-2002-500
Clutch Kits
Intercooler Hoses
Carbon Fibre Air Intake
Solid Boost Actuator
An AVO actuator endows the factory turbo with a quicker,
harder boost response, and ensures that boost is maintained
at user-adjusted levels, resulting in increased torque and
power. Where the factory actuator drops boost as the revs
rise, the AVO actuator delivers consistant
boost levels across the rev range.
A safe, reliable and effective method
of gaining control over your boost.
WRX & STI • WRX-1348-000
Our design incorporates a 30mm shorter
throw and is 10mm shorter in height.
The result is a smoother throw
and faster shifting.
2.5: WRX-043-25
2.0: WRX-043
Forged Pistons
Having built WRX engines that have developed over 500hp,
we know what it takes to build a reliable big-power engine.
When looking for big gains, you must look at forged pistons.
We offer pistons to suit a range of applications, in either
stock uncoated or
ceramic/teflon
coated trim, and in
any compression
ratio desired.
2.5: WRX-054-25
2.0: WRX-054
Engine Bearings
Heavy-duty engine bearings
ensure the life of your engine.
AVO-BEARING
WRX • WRX-2001-095
Big Brake Kit
Stabilizer End Links
AVO's newly designed adjustable
end-links will help you control pitch
and dive under acceleration and
braking, while minimizing
body roll in cornering.
Front • AVO26
The AVO Big Brake Rotor kit incorporates adapters that
allow you to retain your factory 4-pot calipers, or to
add your own. Give your car
the braking capabilities a
high-speed car needs!
Note: 17" wheels are
required to fit this
big brake kit.
WRX-AVO-000
www.avoturboworld.com
SMT Subcom
Top Mount Intercoolers
Bolting on parts can do more harm than good without proper
engine management! The AVO SMT
Subcom should be your first stop
when building for power!
Our bar and plate designs are the best in the
industry! High flow, low pressure
drop and large cooling capacity
all add up to more power for
you, especially on hot
summer days.
Front Mount Intercoolers
The best setup for developing big power
reliably by keeping your air charge cool
under all conditions. Designed specifically
to fit for your WRX and STI, with
very little pressure drop and
huge air cooling capacity.
WRX • WRX-1344-250
STI • STI-1344-000
WRX • AVO-SUB-000
Stand-alone ECU solutions
Our stand-alone solutions give you full
control over all engine parameters,
allowing you to tune for
maximum performance
for all types of
competitive racing.
Exhaust Manifold
AVO 4-1 extractors deliver increased power
and torque via full stainless, mandrel bent,
purged tig welded construction.
Simply bolt the manifold in
place, and you will feel the
AVO difference!
All Models
Electronic Boost Controller
The AVO Electronic Boost Controller (EBC) is a fully
electronic boost pressure controller designed to tightly
control and adjust the boost pressure delivered
to the intake manifold.
Suitable for factory or
aftermarket turbo systems
using either a swing or poppet
valve actuator.
WRX • AV0-001
Our speed cut controller is extremely
easy to install and comes with
easy to follow instructions.
WRX • AVO-026
Knock Link with Outrigger
Make sure your engine is safe with our knock-detecting
KnockLink with outrigger display.
This 'Flow Series' power filter has a top feed
intake and a specially woven filter material
design which provides extra flow and
protection over other brands. With the
AVO cast aluminium adaptor bolting directly
to the air flow meter, it makes for an
extremely easy installation.
WRX & STI • WRX-1630-000
WRX • WRX-1001-2001
Cast Turbo Outlet
Our cast outlet for the WRX and STI
incorporates a splitter to deflect
wastegate gases, improving turbo
spool up. Together with our AVO
Edge turbochargers we now
offer the worlds most potent
'Emissions Legal' WRX turbo/
downpipe combination.
WRX • WRX-1005-000
Speed Cut
Power Air Filter
Panel Air Filter
Our flat panel air filters are a simple and elegant upgrade for
your intake system, flowing better
than stock while maintaining
high levels of protection.
WRX & STI • WRX-PAN-000
High-flow Intake Pipe
SS Front Pipe
Our cast outlet/stainless steel front pipe combo with it's
76mm high-flow sports cat converter, piping, and flanges
simply replaces the highly restrictive factory system,
reducing back pressure and restoring power and
turbocharger response. This is the real deal
for top-end high performance race use
while still being emissions legal on
the street.
This high-flow intake pipe of AVO turboworlds
own design offers 30% better flow than the
stock system and is much stronger, a necessity
when going for higher boost
levels. Increasing flow to the
turbocharger aids throttle
response and performance.
WRX & STI • WRX-3120-000
STI • STI-2005-500
STI & WRX • LINK-085-1
WRX • WRX-2005-500
Turbo Up-pipe
'Cat-less' up-pipe for those interested in serious
performance. Off-road and track applications only.
Blow Off Valve
We utilise the latest technology in
lightweight internal valving to ensure
optimum blow-off response at all
times. AVO BOVs are designed to
replace the factory part by
retaining the return tube,
keeping the computer happy.
An additional vent to send hot
air to atmosphere is designed
in as well.
WRX & STI • WRX-2009-2001
Exhaust - Cat Back
Designed and manufactured to provide unrestricted flow
while absorbing high frequency exhaust notes.
WRX-2001-008
Carbon Fibre Cold Air Box
Our own design, this carbon fibre adds a bit
of WRC style to your engine bay as well as
keeping your intake air cooler
by isolating your air filter
from the hot engine bay.
Highly recommended
to go with the AVO Power
Air Filter kit.
WRX & STI • WRX-CFAK-300
STI: STI-060
Manufactured from super high quality silicon, Samco hoses
withstand high boost pressure
and temperatures,
making them a must for
racing applications.
Available in Red or Blue.
Carbon Fibre Air Box Lid
AVO has developed a range of high
quality carbon fibre replacement
parts that not only improve the
aesthetics of your engine bay
to show level, they also are
lighter than stock, improving
overall performance.
WRX: WRX-060
AVO's high-flow fuel pump is a direct
bolt-in, extremely quiet, and delivers
210lt per hour @ 45psi.
High-Flow Injectors
Our 660cc and 800cc Fuel injectors
offer exeptional flow while retaining
the same resistance as a factory
injector. Choosing the correct
injector for an application
ensures the engine always
has enough fuel to meet
the demands of high boost.
Radiator Hoses
High quality hoses to
the radiator,
available in Red or Blue.
WRX & STI •
WRX-TCS135C
800cc • WRX-INJ-8004
660cc • WRX-INJ-6604
Gauge Holder
Hi-pressure Parallel
Fuel Regulator Kit
Our gauge pods take a 52mm
or 2" gauge. Sits discretely in
the corner of the dash for
a true 'factory' look.
AVO's fuel regulator system is
designed to give equal fuel
distribution to your fuel rails and
also allows for you to increase your fuel
pressure for a more reliable
fuel supply.
WRX • WRX-2001-096
Boost Gauge
Intercooler Water Spray
This waterspray kit utilises the
factory washer bottle spray
switch, the control unit is
located near the driver,
and is comes with 2 to 30
second spray adjustment.
AVO-077
WRX • WRX-2001-016
Multi-function Meter
This integrated multi-function digital turbo monitoring system
reads turbo boost, but also engine air intake temperature and
engine coolant temperature. In addition to this it can be
configured to automatically trigger and run intercooler system
water sprays. Note: can be ordered in psi or bar.
AVO-079
Suspension Bushings
See our website for details.
For all your suspension
bushing needs. Our
polyurethane bushings
take the waffle out
of your setup.
Short Shift with Bushing
Breather Tank Kit
WRX & STI-WRX-096
Billet Steel Flywheel
High rpm, high output engines
don't only deserve, they
demand this one-piece,
lightweight billet steel
flywheel upgrade, a
must for any serious racer.
WRX-050
Billet Con-rods
Heat-treated chrome-moly I-beam connecting rods designed
for the late night street guy or full-on circuit racer. Big
boost, big turbos, and
big revs can have a
devastating effect on
the stock Subaru
con-rods.
WRX-FUEL-PARALLEL
AVO's 52mm boost gauge is whitefaced with green backlighting.
Monitors boost up to 1.4 bar.
When you fit a larger turbo or simply increased your boost,
you raise the chances of blow-by, a phenomenon whereby
misted oil is pumped out of the breathers and back through
the engine's induction system.
This can even affect stock
systems. Our Oil Breather Tank
kit prevents the oil from
re-entering the system, reducing
the possibility of detonation.
WRX & STI • WRX-2001-065
WRX & STI • WRX-2001-ABL
High-flow Fuel Pump
AVO's specially developed clutch
for 5-speed Subaru's.
Suitable for applications
from mild to wild without
compromising pedal feel
and weight throw by
maintaining the stock
pivot point.
WRX & STI •
WRX-PUM-003
WRX & STI •
WRX-TCS-168
This carbon fibre air intake gives your engine bay that WRC
look while increasing the
amount of cold air
available to your
intake system.
WRX & STI • WRX-2001-AP
WRX & STI • WRX-2002-500
Clutch Kits
Intercooler Hoses
Carbon Fibre Air Intake
Solid Boost Actuator
An AVO actuator endows the factory turbo with a quicker,
harder boost response, and ensures that boost is maintained
at user-adjusted levels, resulting in increased torque and
power. Where the factory actuator drops boost as the revs
rise, the AVO actuator delivers consistant
boost levels across the rev range.
A safe, reliable and effective method
of gaining control over your boost.
WRX & STI • WRX-1348-000
Our design incorporates a 30mm shorter
throw and is 10mm shorter in height.
The result is a smoother throw
and faster shifting.
2.5: WRX-043-25
2.0: WRX-043
Forged Pistons
Having built WRX engines that have developed over 500hp,
we know what it takes to build a reliable big-power engine.
When looking for big gains, you must look at forged pistons.
We offer pistons to suit a range of applications, in either
stock uncoated or
ceramic/teflon
coated trim, and in
any compression
ratio desired.
2.5: WRX-054-25
2.0: WRX-054
Engine Bearings
Heavy-duty engine bearings
ensure the life of your engine.
AVO-BEARING
WRX • WRX-2001-095
Big Brake Kit
Stabilizer End Links
AVO's newly designed adjustable
end-links will help you control pitch
and dive under acceleration and
braking, while minimizing
body roll in cornering.
Front • AVO26
The AVO Big Brake Rotor kit incorporates adapters that
allow you to retain your factory 4-pot calipers, or to
add your own. Give your car
the braking capabilities a
high-speed car needs!
Note: 17" wheels are
required to fit this
big brake kit.
WRX-AVO-000
www.avoturboworld.com
57 TAUNTON DRIVE CHELTENHAM, MELBOURNE, VICTORIA 3192
TEL: +61 (0) 3-9584-4499 FAX: +61 (0) 3-9584-4008
57 TAUNTON DRIVE CHELTENHAM, MELBOURNE, VICTORIA 3192
TEL: +61 (0) 3-9584-4499 FAX: +61 (0) 3-9584-4008
Impreza WRX & STI
Legacy GT
New! USDM Legacy GT Ballbearing turbochargers!
AVO is proud to announce our new line of bolt-on ballbearing turbochargers for the USDM Legacy GT. These
high-response turbochargers breath new life into the 2.5liter turbo motor. Oil and water supply lines are a feature
of our turbos for OEM levels of longevity.
AVO 400 Type L • LEG-1270-000
AVO 450 Type RS • LEG-1300-000
AVO 500 Type D • LEG-1330-000
Bolting on parts can do more harm than
good without engine management!
AVO's SMT Subcom should be your first
stop when building for power!
AVO-SUB-500
New! Legacy TMIC!
After intensive R&D, AVO is proud to
present our top mount intercooler
upgrade for the Legacy GT turbo. This
bar and plate intercooler increases
response, suffers less pressure drop
than stock, and helps cooling on
those hot summer days!
LEG-1343-300
High-flow Cat Front Pipe
Blow Off Valve
We utilize the latest technology
in light-weight internal valving to
ensure optimum blow-off
response at all times.
This 50/50 recirc/vent
BOV is a bolt-on solution.
Our 76mm stainless steel front pipe and high-flow
sports catalytic converter is designed to bolt right in,
replacing your highly restrictive standard front pipe
with this state-of-the-art system, reducing
back-pressure and enhancing the
performance of your turbo.
LEG-2005-500
AVO-060
Power Air Intake
AVO's new "Flow Series" power filter has a top
feed intake and specially woven filter material
design to provide extra flow over other brands.
With the AVO cast aluminum
adapter bolting directly to
the air flow meter, it
makes for an extremely
easy installaion.
AVO knows Subaru like nobody else. From the day the turbocharnged flat
fours have been here, we have been applying our 34+ years of experience
making them go faster. From our unique turbochargers to intercoolers to
suit any power level, we've done it. AVO turboworld is an industry leader
in the field of turbosystem design and manufacturing.
Our engineering philosophy is unique in our focus on efficiency instead of relying on dangerously high boost
pressures. Our four tenets explain it all: optimising intake systems, opening up the exhaust, creating the best
possible intercooler, and then joining the whole package together with state of the art engine management that
is never miss-matched for the application.
Thousands of hours of have been spend designing, testing, and developing our range of WRX and STI
performance parts. Much of that time is spent on possibly the most important aspect of them all - ensuring that
all turbosystem parts integrate seamlessly with the stock engine, transmission, and electronics package.
Our Subaru Performance Programmes simply are without rival when it comes to design integrity, quality of
workmanship and materials used. When correctly chosen and fitted properly, you will experience significant
power increases that are also a pleasure to drive. And with proper servicing and maintenance, it will remain so
for many years of trouble-free operation.
AVO Edge Series Ball-Bearing Turbochargers
You want that extra edge at the races? AVO's famous Edge series ball-bearing turbochargers.
Time-tested and proven worldwide, they come in every size that you would need. Supplied
world-wide for street and race applications, you won't find a turbocharger offering better
performance, response, and driveability. Water and oil-cooled for maximum reliability under
all conditions.
LEG-1630-000
Gauge holder
Pod-style 52mm gauge holder.
Stainless Steel Centre Pipe
LEG-2005-098LH
Improve your mid-range and overall power with our
76mm full stainless steel center pipe. Improves one
of the biggest restrictions in the Legacy exhaust
system!
Boost Actuator
LEG-3005-300
An AVO actuator endows the factory
turbo with more solid boost response, also
ensuring that boost is maintained at a preset level. This results in increased torque
and power with high levels of response.
LEG-060
Panel Air Filter
Designed for a drop in
solution for better, safe air
flow. It doesn't get any easier
than this!
LEG-PAN-000
Remove the roll and increase your stability
with these ARB upgrades!
REAR: LEG-ADJ-021R
300
260
Suspension Bushes
See our website for more details! Polyurethane
bushings to take the wobble out of your ride!
250
ALL Models
200
220
Put a pair of high-flow AVO mufflers on the back of
your Legacy and experience the power difference!
Stainless steel system improves powe across the
band, and looks great as well!
LEG-3005-500
180
150
140
100
Stabilizer End Links
FRONT: LEG-ADJ-022F
340
HP: AVO
HP: Stock
350
300
High-Flow Mufflers
Stabilizer bars
HP
Torque: AVO
Torque: Stock
Our newly designed end links help control pitch
and dive, plus minimises body roll during hard
cornering.
FRONT: AVO26
REAR: AVO26
www.avoturboworld.com
AVO 320 Type S
AVO 400 Type L
AVO 400 Type S
AVO 450 Type RS
AVO 500 Type D
• WRX-1220-000
• WRX-1270-000
• WRX-1275-000
• WRX-1300-000
• WRX-1330-000
1000
2000
3000
4000
5000
www.avoturboworld.com
6000
7000 rpm
To rq u e
SMT Subcom
Subaru GDA/GDB Pure Power Packages