specifications - YEONG CHIN MACHINERY INDUSTRIES CO., LTD
Transcription
specifications - YEONG CHIN MACHINERY INDUSTRIES CO., LTD
SPECIFICATIONS FV56T SPINDLE FV56A FV85A 15,000rpm Spindle Speed (opt.) Spindle Taper Front Bearing Diameter 5.5/7.5/11/15kW 7/10/15/20HP (7.5/11/15/22kW 10/15/20/30HP) (cont./30min./10min./5min.) (cont./30min./10min./5min.) BT30 ø45mm ø1.77" TRAVEL BBT40 ø70mm ø2.76" 560mm 22.05" 410mm 16.14" 450mm 17.72" X-axis Travel Y-axis Travel Z-axis Travel Distance Between Spindle Nose & Table Top 850mm 33.46" 110~560mm 4.33"~22.05" 3 x 14mm x 100mm 3 x 0.55" x 3.94" 300kg 661 lb FEEDRATE 1,270mm 50" 105~645mm 4.13"~25.39" 1,000 x 520mm 1,120 x 520mm 1,350 x 520mm 39.37" x 20.47" 44.09" x 20.47" 53.15" x 20.47" 5 x 18mm x 100mm 5 x 0.71" x 3.94" 500kg 1,102 lb 1,000kg 2,205 lb 700 x 420mm 27.56"~16.54" T-Slots × Size × Pitch Max. Load on Table 1,020mm 40.16" 520mm 20.47" 540mm 21.26" 150~690mm 5.91"~27.17" TABLE Table size FV125A 10,000rpm (12,000/15,000rpm ) 5.5/7.5/11/15kW 7/10/15/20HP 2.2/3.7kW 3/5HP (cont./15min.) Spindle Power (opt.) FV102A 24/24/24 m/min. 945/945/945ipm 36/36/24 m/min. (48/48/48 m/min.) 36/36/24 m/min. 1,417/1,417/945ipm 1,417/1,417/945ipm (1,890/1,890/1,890ipm) 1~10,000mm/min. (0.04~394ipm) Rapid Feedrate Cutting Feedrate ATC Tool Magazine Capacity Max. Tool Weight (per piece) Pull Stud Max. Tool Dimensions Max.Tool Dimensions (Without adjacent tools) Tool Changer Method Tool Selection Method 16T (20T) 4kg 8.8 lb MAS-P30T-1 ø63 x 200mm ø2.48" x 7.87" 20T 24T (30T) 6kg 13.2 lb MAS-P40T-1 ø90mm x 300mm (ø76mm x 300mm) ø3.54" x 11.81" (ø2.99" x 11.81") ø90mm x 250mm ø3.54" x 9.84" ø100mm ø3.94" ø125mm ø4.92" Arm Type Random Arm Type (Armless Type) Random (By Sequence) GENERAL Pneumatic Supplier Power Consumption (std.) Machine Weight 16kVA (17kVA) 2,800kg 6,173 lb 3,000kg 6,614 lb 5.5kg/cm2 78.2psl 25kVA (30kVA) 5,350kg 11,795 lb 5,260kg 11,596 lb 6,700kg 14,771 lb Note: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference. PULL STUD TOOL SHANK 48.4 1.91” 22 0.87” 70.4 2.77” 45° Taper 7/24 65.4 2.57” M16 x 2P ø53 ø2.09” ø44.45 ø1.75” M12 x 1.75P 30° 28 1.10” ø17 ø0.67” MAS-P40T-1 Ball Diameter ø10 ø0.39” 3 0.13” ø12.5 ø0.49” 18 0.71” ø9.5 ø0.37” ø7 ø0.28” ø11 ø0.43” ø16.5 ø0.65” ø46 ø1.81” ø38 ø1.5” ø31.8 ø1.25” 16 0.63” 2.5 0.1” 2 0.08” 25 0.98” ø15 ø0.59” 5 0.2” 0.16” 3.5 0.14” Taper 7/24 1-0.005 M16 x 2P 43 1.69” 4 3 0.12” 23 0.91” 0.31” M12 x 1.75P ø0.49” BBT40 ø10 ø0.39” ø23 ø0.90” MAS-P30T-1 ø63 ø2.48” ø75.7 ø2.98” BT30 35 1.38” 4 5 0.19” 0.16” 60 2.36” 16.6 0.65” ACCESSORIES Tool Kit Work Lamp Pilot Lamp Coolant Gun Coolant Equipment System Cuttng Air Blast Spindle Air Blast Spindle Air Seal Central Lubrication System Oil Skimmer Coolant Through Spindle System Foundation Bolts Leveling Blocks and Bolts Oil-Mist Coolant System Oil Hole Holder Function Chips Flush Coolant System Chip Conveyor Workpiece Measurement System Heat Exchanger for Electrical Cabinet A/C. Cooler for Electrical Cabinet ● ● ● ● ● ● ● ● ● ● ○ ● ○ ○ ○ ○ ● ○ ● ● ● ● ● ● ● ● ● ● ○ ○ ● ○ ○ ○ ○ ○ ● ○ ● ● ● ● ● ● ● ● ● ● ○ ○ ● ○ ○ ○ ○ ○ ● ○ ● ● ● ● ● ● ● ● ● ● ○ ○ ● ○ ○ ○ ○ ○ ● ○ ● ● ● ● ● ● ● ● ● ● ○ ○ ● ○ ○ ○ ○ ○ ● ○ Mechanical, Electrical & Operating Manuals Rigid Tapping Guideway Cover (X,Y,Z) Optical Scale Automatic Door Safty Door 4th Axis Rotary Table Spindle Cooling System Heavy Duty Coolant Pump Auto Tool Length Measurement System Full Chip Enclosure Circular Coolant Nozzle Screw Type Chip Conveyor Air Gun Automatic Power Off Device Hydraulic System Oil-Mist Collector CNC Controller: MXP-200FB CNC Controller: MXP-200FC ● ● ● ● ● ● ● ○ ○ ● ○ ○ ○ ● ● ○ ○ ● ○ ○ ○ ● ● ○ ○ ● ○ ○ ○ ● ● ○ ○ ● ○ ○ ○ ● ● ○ ○ ● ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ● ○ ○ ○ ● ○ ● ○ ● ○ ○ ○ ● ○ ● ○ ● ● ○ ○ ○ ● ○ ● ○ ● ● ○ ○ ○ ● ○ ● ○ ● ○ ○ ○ ● ○ FP / High Precision Graphite Vertical Machining Center FP55LX, FP66A, FP100A / FP66G FV FV56T, FV56A, FV85A, FV102A, FV125A / FV50T XV XV560A, XV1020A, XV1250A NXV High Precision Die & Mold Vertical Machining Center NXV1020A, NXV1020AM TV TV116B, TV146A/B, TV158B, TV188B, TV2110B, TV2610B NTV High Efficiency T-base Vertical Machining Center NTV158A/B MV MV66A, MV76A, MV86A, MV106A WV WV108A/B FX High Performance FX380A NSV NSV66A, NSV85A, NSV102A, NSV156A NDV NDV66A, NDV85A, NDV102A NBX High Performance Swivel Head 5-axis Vertical Machining Center NBX102A TCV TCV2000A, TCV3000A, TCV3000A-5AF, TCV3000A-5AX DCV DCV2012A/B, DCV2016B, DCV3016B, DCV4016B, DCV3021B, DCV4021B, DCV5021B, DCV6021B, DCV3025B, DCV4025B, DCV5025B, DCV4035B, DCV5035B, DCV6035B, DCV4030B, DCV5030B, DCV6030B, DCV4030B-5AF, DCV5030B-5AX, DCV6030B-5AX, DCV4030B-5AF NDC High Performance Double Column Vertical Machining Center NDC2016B, NDC3016B, NDC3016B H H500A/B, H630B, H800B, H2612B NH High Speed High Precision Horizontal Machining Center NH450A, NH630B, NH800B HBM Horizontal Boring Milling Machining Center BMP BMP1416B NT High Accuracy Heavy Duty Boring Machine High Performance Mill-axis Mill/Turn Center NT-2000Y/SY, NT-2500Y/SY GT GT-200A/B/MA, GT-250A/B/MA/MB, GT-300A/B/LA/LB/MA/MB/LMA/LMB, GT-380A/B/LA/LB TC TC-16A/B/LA/LB/MA/MB/LMA/LMB, TC-26, TC-26L, TC-36, TC-36W, TC-46, TC-46M Remote Monitoring System A remote monitoring system YEONG CHIN MACHINERY INDUSTRIES CO., LTD. 888 Homu Road, Shengang District, Taichung, Taiwan 022013-E09-1000 High Speed High Performance Machining Vertical Center HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER The YEONG CHIN FV-Series High-Speed, High-Power Vertical Machining Centers are specially designed for industries that demand high precision, high productivity application such as automotive, aerospace, electronic, and job shop industries. With our unique IDD (Isolated Direct Drive) Spindle Design and our ultra-wide, ultra-rigid internally ribbed construction, our FVSeries delivers exceptional cutting finish and accuracy. With the addition of ATC system that changes tool-to-tool in 1 second for 30# spindle, and 3.5 seconds for 40# spindle, the newly developed NR type linear motion guide ways from THK, and the FANUC high responsive AC servo units, our FV-Series will more than pay for its value in no time, and we will bring you success. 1 * Optional functions under FANUC MXP-200FB or MXP-200FC control system. The most cost-effective solution in high-speed, high-precision mold & die machining. 0.1μm High Resolution Modular (HRM)* + Simultaneously Differential Feedrate Control (SDFC)* Take a YCM FV-Series Vertical Machining Center with the HRM and SDFC functions, conduct tests and then check by Heidenhain Grid Encoder with the following results, which prove HRM and SDFC not only enhance the feed rate control but also keep good accuracy. ■■ Conduct R = 40mm 1.58" circular interpolation on XY plane with 600mm/min. 23.62ipm and 5,000mm/min. 196.85ipm cutting feed respectively. 10μm /div F: 600mm/min. F: 23.62ipm 10μm/div Circularity: 4μ Circularity: 5μ F: 5,000mm/min. F: 196.85ipm ■■ Conduct 45mm 1.77" linear interpolation on XY plane with 600mm/min. 23.62ipm and 5,000mm/min. 196.85ipm cutting feed respectively. HEIDENHAIN ACCOM HEIDENHAIN ACCOM Error: 6μ Error: 6μ F: 600mm/min. F: 23.62ipm F: 5,000mm/min. F: 196.85ipm 2 Unique Spindle IDD Design Unique direct coupled spindle design could isolate heat source, reduce the thermal deformation, increase the spindle precision and prolong spindle life. Isolated polyurethane flexible coupling is used between motor and spindle. Optional spindle cooling system could achieve better accuracy control. Direct power transfer from spindle shaft to the cutting edge, ensures the power efficiency. Detecting the spindle speed from the build-in encoder of spindle ensures the best performance of rigid tapping. Hi-Speed, Hi-Power Spindle Design FV56T (30#) ■ Ceramic bearings are applied on 15,000rpm spindle, with features of lighter weight, low centrifugal force, high rigidity, low coefficient of heat expansion, so as to achieve better accuracy and spindle life. ■ High horse power design, maximum output for acceleration can achieve 20kW 27HP. ■ High torque, low inertia-form 0 to 6,000rpm takes only 0.3sec. to reach. Excellent in mass drilling and tapping works. ■ The high precision spindle bearing system, with ID. 45mm, is to match the small & precise mold making requirements. ■ Max. rigid tapping speed: 6,000rpm. FV56A/85A/102A/125A (40#) ■ The 10000rpm spindle deploys precision ceramic ball bearings of light mass, low centrifugal force, low swell factor, but high rigidity, which assure the optimal accuracy and spindle life span. ■ Oil-Air lubrication 12,000rpm or 15,000rpm spindle is available for option. 3 Various High-Speed Spindle Options for Selection to Meet the Utmost Machining Requirements. For : FV56A / FV85A / FV102A / FV125A 10,000rpm (std.) For : FV56T - 15,000rpm 5min. 6.96 50.34 5min. 2.38 17.21 3.7 5 0.54kgf-m 0.36kgf-m 0.67 4.85 3,000 5,500 8,000 15,000 1,500 2,100 For : FV56A / FV85A / FV102A / FV125A 12,000rpm (opt.) 12.98 93.89 1,500 2,100 2,700 4,000 1.07kgf-m 0.61kgf-m 0.45kgf-m 5,500 8,000 10,000 12,000 1,500 1min. 5min. 1,500 3,000 22 30 12.98 93.89 2min. 11.69 84.56 5min. 8,000 4,000 10,000 2min. 5min. 22 30 18.5 25 18.5 25 1.50kgf-m 1.22kgf-m 0.89kgf-m 0.61kgf-m L H 30 For : FV85A / FV102A / FV125A 15,000rpm (opt.) 1min. 5min. 22 2.14kgf-m 1.46kgf-m 1.07kgf-m 0.73kgf-m L H For : FV85A / FV102A / FV125A 12,000rpm (opt.) 11.69 84.56 10,000 5min. 5min. L H 12.98 93.89 8,000 For : FV85A / FV102A / FV125A 10,000rpm (opt.) 5min. 5min. 4,500 12,000 L H 1,500 4,000 1.43kgf-m 1.20kgf-m 0.97kgf-m 0.71kgf-m 0.49kgf-m 15,000 4 High Efficiency Utmost performance Integration, Solution & Automation Reliable ATC Unit ■ Fast and reliable roller gear cam ATC allows ATC time in 1 second (for FV56T), and 3.5 secods (for FV56A/FV85A/ FV102A/FV125A), lowers the idle time and enhances the machining efficiency. ■ The ATC units were running tested more than million times before their mass production to ensure high reliability. Complete chips disposal system ■ Ensure the cleanness of machining environment. Optional flush coolant can be used to prove the chips disposal efficiently. ■ Screw type chip conveyor makes the chips disposal more easily & efficiently. (FV85A / FV102A) ■ Complete set of the Y-axis back side plate well protects the guide-way for durable operation. Shuttle Type Automatic Pallet Changer (FV102A, Option) ■ APC's swivel arm is driven by X-axis servo motor with unique rack transmission design, features fast and accurate pallet change mechanism. ■ APC time is around 15 seconds. ■ Over sized taper pins are applied to ensure backlash-free positioning and rigid clamping on the pallet. ■ APC feed rate is adjustable to appropriate speed for different work pieces' demand. Advanced APC Design (FV56T/A, Option) ■ Hi-speed rotary auto-pallet changer. ■ APC time takes 9 seconds only. ■ Reliable rotary mechanism driven by servo motor reducer achieves quick APC speed. ■ Rotary speed is adjustable to ensure better stability when heavy loading on the pallet. ■ Shot flush coolant could clean the positioning block automatically. ■ The minimum floor space required, saving floor space and saving money. 5 / / Super-Accuracy & Rigidity Construction for High Speed Epoch ■ Tough and durable MEEHANITE castings deliver exceptional cutting stability and consistent accuracy - the massive, rigid internally ribbed construction reduces damping effect for superb part finishing. ■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during heavy-duty machining. ■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning repeatability and accuracy during long machining cycles. ■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction, low noise, thus to assure much smoother movement in high-speed traverse. ■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional cutting rigidity and stability. FV56T Headstock Extra W e n Bas olum ide C Axial Rapid Feedrate (opt.) ide Extra W 60mm Mac ase 9 hine B 37.80" X 36m/min. (48m/min.) 1,417ipm (1,890ipm) Y 36m/min. (48m/min.) 1,417ipm (1,890ipm) Z 24m/min. (48m/min.) 9,45ipm (1,890ipm) 6 / / Super-Accuracy & Rigidity Construction for High Speed Epoch ■ Tough and durable MEEHANITE castings deliver exceptional cutting stability and consistent accuracy - the massive, rigid internally ribbed construction reduces damping effect for superb part finishing. ■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during heavy-duty machining. ■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning repeatability and accuracy during long machining cycles. ■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction, low noise, thus to assure much smoother movement in high-speed traverse. ■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional cutting rigidity and stability. Extra lumn Co Wide Base Axial Rapid Feedrate Extra 7 ase hine B Mac Wide mm 1,090 " 42.91 X 36m/min. 1,417ipm Y 36m/min. 1,417ipm Z 24m/min. 9,45ipm / / Super-Accuracy & Rigidity Construction for High Speed Epoch ■ Tough and durable MEEHANITE castings deliver exceptional cutting stability and consistent accuracy - the massive, rigid internally ribbed construction reduces damping effect for superb part finishing. ■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during heavy-duty machining. ■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning repeatability and accuracy during long machining cycles. ■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction, low noise, thus to assure much smoother movement in high-speed traverse. ■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional cutting rigidity and stability. se mn Ba e Colu id W Extra Y-Aaxis 4-Slideway Design Axial Rapid Feedrate Extra chine Ma Wide mm B ,455 ase 1 57.28" X 24m/min. 9,45ipm Y 24m/min. 9,45ipm Z 24m/min. 9,45ipm 8 / / DIMENSIONS * The appearance of the machines will be diverse due to different model and selectivity of controllers. 420 16.54 110 3.94 420 16.54 100 100 3.94 3.94 100 100 3.94 3.94 110 TABLE SIZE 110 4.33 3.94 9 0.35 27.5 1.08 2 0.08 30° 14 0.55 23 0.91 0.5 0.02 700 27.56 14 H8 0.55 700 27.56 2,740 107.87 2,090 82.28” 1,660 62.35” T-SLOTS FV56T : 2,330 91.73” FV56A : 2,480 97.64” 2,167 85.31” 230 9.06” 2,120 83.46” 1,990 78.35” 678 23.62” (Door Open) FV56T : 1,620 63.78” FV56A : 1,850 72.83” 9 1,625 63.98” 2,280 89.76” Unit : mm inch / / DIMENSIONS * The appearance of the machines will be diverse due to different model and selectivity of controllers. TABLE SIZE 3,430 135.04” T-SLOTS 18 H8 31 1.22 0.71 32 1.26 0.5 0.02 13 0.51 FV85A : 1,000 39.37 / FV102A : 1,120 44.09 75 7” R6 6.5 R2 520 20.47 60 100 100 100 100 60 2.36 3.94 3.94 3.94 3.94 2.36 2,413 95” 2,300 90.55” 2,780 109.45” (CTS: 3,110 122.44”) 2,235 87.99” 2,030 79.92” 2,445 96.26” 3,040 119.69” 150 5.91” 216 8.5” 1,290 50.79” FV85A : 2,150 84.65” FV102A : 2,580 101.57” Unit : mm inch 10 / / DIMENSIONS * The appearance of the machines will be diverse due to different model and selectivity of controllers. 520 20.47 90 R .4 3” 0 TABLE SIZE R 35 520 20.47 100 100 100 100 60 3.94100 3.94 100 3.94 3.94 2.36 60 100 100 2.36 100 100 100 100 32 1.26 0.5 0.02 13 0.51 31 1.22 0.71 3,100 122.05” 1,275 50.2” 1,650 64.96” 1,050 43.34” 2,975 117.13” 2,300 90.55” 2,070 81.5” 1,890 74.41” 2,500 98.43” 2,240 88.19” 1,250 49.21” 3,500 137.8” 11 Unit : mm inch 2,466 97.09” H8 2,125 83.66” 18 3,000 118.11” 1350 53.15 1350 53.15 T-SLOTS / / DIMENSIONS Relevant Specifications of APC (Option) Model FV56T Pallet Size 560 x 410mm 22.05" x 16.14" Table Load Capacity 120kg 265 lb Distance Between Spindle Nose and Table Top Axial Rapid Feedrate FV56A 25 ~ 475mm 0.98"~18.70" 36/36/24 m/min. 1,417/1,417/945ipm (X/Y/Z) Machine Weight 3,630kg 8,003 lb 3,850kg 8,488 lb * The appearance of the machines will be diverse due to different model and selectivity of controllers. 250 9.84 SCREW HOLE 865 34.06 R5 R2 40 1.2 6 40 R5 .26 1 R2 1,100 43.31 0.5 0.02 22.5 0.89 ø13.5 ø0.53 80 80 3.15 3.15 M12x1.75P 460 18.11 160 6.30 160 6.30 410 16.14 1,850 72.83 2,230 87.80 800 31.50 2,045 80.51 2,185 86.02 1,930 75.98 1,175 46.26 260 10.24 2,155 84.84 2,190 86.22 (top cover , option) FV56T : 2,145 84.45 / FV56A : 2,470 97.24 FV56A :2,675 105.31 (α T6,CTS*, option) 195 7.68 1,600 62.99 1,960 77.17 2,500 98.43 (option) 2,210 87.01 80 80 3.15 3.15 240 9.45 250 9.84 R6 R2 75 6.5 7 118o 160 6.30 160 6.30 240 9.45 560 22.05 DIMENSIONS 1,350 53.15 3,295 129.72 APC TABLE SIZE 310 12.20 3,095 121.85 Unit : mm inch 12 / / DIMENSIONS Relevant Specifications of APC (Option) Model FV102A Pallet Size 1,000 x 480mm 39.37" x 18.9" Table Load Capacity 400kg 882 lb Distance Between Spindle 30~570mm Nose and Table Top Axial Rapid Feedrate 1.18"~22.44" (X/Y/Z) Machine Weight 24/24/24 m/min. 945/945/945ipm 6,360kg 14,021 lb * The appearance of the machines will be diverse due to different model and selectivity of controllers. 1,360 53.54 245 9.65 TABLE SIZE SCREW HOLE 40 1.57 500 19.69 ° 60 2C2C ° 240 9.45 ø110 2C 2C 18 6 18 6 1,000 39.37 100x9 0° 60 1,350 53.15 35 45 50 1.97 M16x2P ° 675 26.57 120° ø20 60 4,090 161.02 1,680 66.14 DIMENSIONS 480 18.90 100x4 3 0.12 ø50 3,475 136.81 1,630 64.17 13 2,820 111.02 170 6.69 R400 R15.75 635 25 870 34.25 1,365 53.74 CTS* : 3,110 122.44 2,920 114.96 (MAX.) 2,015 79.33 995 39.17 2,455 96.65 2,030 79.92 920 36.22 (door open) 2,525 99.41 4,090 161.02 1,210+40 47.64+1.57(handle) Unit : mm inch CONTROL CONTROL byby High High Performance Performance ACAC Digital Digital Servo Servo && Spindle Spindle Drives Drives with withSuper SuperPrecision Precision Absolute Absolute Positioning Positioning Encoders Encoders AIAI NANO NANO CNC CNC Controller Controller forfor High High Precision Precision Operation OperationininNanometers Nanometersand andAcknowledged AcknowledgedHRV HRVControl Control AICC AICC II High II High Speed Speed High High Accuracy Accuracy JERK JERK Function Function && Auto AutoSwitching Switchingon/off on/offMachining Machining Control Control Function Function High High Speed Speed High High Accuracy Accuracy Rigid Rigid Tapping, Tapping, Helical Helical Interpolation, Interpolation,Custom CustomMarco MarcoB,B, and and Tool Tool Path Path Graphics Graphics Manual Manual Guide Guide i with i with Big Big && Double Double Screen Screen Display Display (MXP-200FC, (MXP-200FC,opt.) opt.) Program Program File File Management Management forfor Easy Easy Program Program Classifying Classifying USB USB Drive Drive Port Port forfor Easy Easy Parameters Parameters && CNC CNC Programs ProgramsTransfer Transfer Large Large Program Program Capacity Capacity with with 1,280 1,280 Meters Meters ofof Memory Memory High High Speed Speed Positioning Positioning Function Function (MXP-200FC, (MXP-200FC, opt.) opt.) Memory Memory Card Card Program Program Edit Edit && Operation Operation (opt.) (opt.) 3D3D Interference Interference Check Check (opt.) (opt.) NANO NANO Smooth Smooth (opt.) (opt.) G-menu G-menu Function Function User-friendly User-friendly G-menu G-menu function function provides provides multiple multiple machining machining cycles cycles that that greatly greatly simplifies simplifies programming programming steps steps Calculator Calculator Function Function Convenient Convenientcalculator calculatorfunction function provides providesfast fastcalculation calculationand and setting settingofofworkpiece workpieceoffsets offsets Easy Easy Shop-floor Shop-floor Programming Programming Manual Manual Guide Guide i i Easy Easy to to use use conversational conversational software software offers offers convenience convenience of of part part programming programming right right onon thethe shop-floor shop-floor with with 3D3D graphical graphical display display and and fullfull simulation simulation function function Counter Counter Function Function Allows Allowsuser usertotoeasily easilykeep keep track trackononnumber numberofof workpieces workpieceswith: with: Main MainCounter Counter Periodical PeriodicalCounter Counter Daily DailyCounter Counter Over OverCycle CycleAlarm Alarm Intelligent Intelligent Tool Tool Data Data Management Management Comprehensive Comprehensive tool tool data data management management function function allows allows operators operators to to monitor monitor and and manage manage allall positions positions in in tool tool magazine magazine High HighSpeed SpeedMachining Machining Mode: Mode:M400 M400 Combined Combinedwith withartificial artificial intelligence, intelligence,M400 M400provides providesusers users more moreconvenient convenientand andeasier easier ways waysofofoperation operationand andachieves achieves fast fastcycle cycletime timeforforthe thebest best machining machiningresult. result. Pop-up Pop-up Alarm Alarm Display Display Detailed Detailed troubleshooting troubleshooting procedures procedures willwill bebe automatically automatically displayed displayed when when machine machine alarm alarm occurs occurs that that allows allows users users to to restore restore machine machine status status and and minimize minimize down down time time Intelligent IntelligentMaintenance Maintenance Reminder Reminder Pre-set Pre-setmaintenance maintenance schedules schedulesare areprogrammed programmed totoremind remindoperators operatorstoto inspect inspectperiodically periodically prolonging prolongingmachine machinelife life Automatic Automatic Tool Tool Length Length Measurement Measurement Manual ManualTool ToolLength Length Measurement Measurement Pre-set Pre-set macros macros and and graphical graphical procedure procedure areare provided provided forfor automatic automatic tool tool length length measurement measurement function function Easy Easysetup setupofoftool toollength length measurement measurementprovides provides convenient convenientsetting setting ofoftool tooloffsets offsetsdata datafrom from one onetool tooltotoanother another 1. The 1. The manufacturer manufacturer reserves reserves the the right right to modify to modify thethe design, design, specifications, specifications, mechanisms, mechanisms, etc.etc. to improve to improve thethe performance performance of of thethe machine machine without without notice. notice. All the All the specifications specifications shown shown above above areare justjust for for reference. reference. 2. The 2. The functions functions of the of the controllers controllers willwill be be distinct distinct duedue to different to different model model andand selectivity. selectivity. OPERATION Software enhancement exclusively from YCM Multi-function Display Easily select multiple windows from the following list of display for your monitoring needs. G-code Status M-code Status Spindle Status Feedrate Tool Data Work Coordination Machining Hours Date and Time Controller Running Hours Spindle Load Function Display Parts Count High Speed Machining Mode: M400 Artificially intelligent machining function that is developed from accumulation of all YCM knowledge and experience on high speed to achieve the fastest cycle time with best machining results. Machining efficiency improved by 25% without sacrificing machining accuracy. Wireless Message Notification (opt.) Integrating GSM communication and CNC technology, YCM developed the WMN system for wireless notification of machine and work status report. YCM WORKP IECE STATUS : COMP LETE