BREN MK1 LMG PARTS SET MAGAZINE CHEST VEST

A2
Phones Open: Mon
- Fri, 8:30am –
5:00pm Showroom
Open: Monday Saturday, 10:00am
– 5:00pm, Friday
til 8:00pm
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
NEW
ITEM
!
U.S. WW2 M19 60MM
MORTAR (non firing)
U.S. Marine Raider and Army Airborne
units benefited from this lightweight mortar rushed into action in 1942 which saw
use in Europe and Pacific theaters and
from Korea through Vietnam. Our nonfiring mortar uses the original baseplate
and M15 sight assembly blended with our
new made tube. Never offered before in
the U.S.! Mortar only
.................................$495.00 MISC397
U.S. 60MM MORTAR SLING
WW2 style heavy duty sling made
from thick canvas with leather
ends. One end also has the wire
loop for attaching around the ‘ball’
end of the mortar tube while the
other end has a leather cup. Late
manufacture........................................ $24.95 SLNG105
M2 60MM MORTAR
BASEPLATE
$275.00 MISC409
BREN MK1 LMG PARTS SET
Nev
offer er
befo ed
re!
After over 50 years of searching for these on the international market, we’ve finally obtained the classic .308 Bren
as used from the 1950s through the 1990s! Last major use was in the Falklands War, but they are still blasting
away in the Congo, Sudan, and other hot spots.
Predecessor to the MAG-58, the Bren .308 LMGs evolved in many versions, whether converted from existing Bren
models or made completely new, these guns were a formidable improvement on the .303 models. Stalwart enough
for use in the Falkland operation where British 2 Para, employed them along side the MAG-58. The magazines were
ideally made to interchange with the the L1A1 service rifle of the time. Sarco has obtained the Model L4A3 Bren
Light Machine Gun and had the receivers cut to BATF specifications. All parts are
BREN /L1A1 30RD.,
included with the kit including the 4 pieces of Demil. Rec., new made short chambered
.308 NATO MAGAZINES
barrel with all original fittings (some assembly required), and we
include 1 – 30 rd. .308 magazine! The quality of the kit is generally in
.308 Bren / L1A1 magazines are here! Steel
30rd. magazines work with both the L4 series
very good condition with a new barrel. This would make a fabulous
of .308 Brens and also the L1A1 Rifle. Can be
‘semi’ build, or display gun. Get one while you can because they are
adapted to work with the Metric FALs as well.
Very good condition..............................BREN124
quite limited!
1 magazine $39.00, 2 for $29.00 each, 10
.............................................................................. $695.00 BREN122
for $25.00 each
NEW
ITEM
!
Evolution of the Bren stemmed from initial designs at the Brno factory in
Czechoslovakia. After licensing, patent changes, and political inclinations,
the British Commission brought the design to Enfield where production
commenced in 1937. From then on , it is a story of Hell, Death, and Destruction…. As one of the finest machine guns put to use on modern battlefields.
Bren Mk1 LMGs were the most expensive to make and perhaps the best
looking with all of it’s intricacies . Timing of production was excellent as in
less than 2 years, the ‘Tommy’ and Commonwealth soldiers would be carrying it into battle at Dunkirk, El Alamein,
Borneo, D-Day and untold of altercations and sorties as the Axis powers were rolled up. Ultimately, it served with well
over 30 countries and can still be found in remote regions. Our Bren Mk1 kit comes with all parts shown including a
very good MK1 barrel, five - .303 magazines, and the original receiver cut in 4 pcs per the BATF requirement.
..................................................................................................................................................... $649.95 BREN019
MAGAZINE CHEST
VEST w/4 BREN
.308 MAGS
NEW
ITEM
!
Rhodesian era Bren Chest Vest as
used to carry the .308 magazines.
We supply the vest with 4 excellent
condition , Bren .308 30 rd. magazines. Excellent bargain! Vest is new
and in grass pattern camo.
$119.95 BREN128
BREN MK 3 LMG PARTS SET
NEW
ITEM
!
Bren MK2 barrel, NEW
.................................$175.00 BREN066
P6/SIG 225 WEST GERMAN
POLICE
HOLSTER
Original West
German Police ‘long drop’ leather
holster. Extremely well made with
detachable swivel attachment.
Used, but in very good condition.
Holds SIG 225 & similar sized pistol
frames..................$18.95 HOL120
Regarded as the lightest of the Bren Guns, the MK3
had lightening cuts made to the receiver and usually
was found with a barrel @2-3/4 inches shorter than the
MK2 series barrel. Nevertheless, both sized barrels were
used on this gun in WW2 . This model was envisaged as
an answer for Airborne and Infantry troops fighting in
the jungles of the Pacific, but actually once production
started in 1943, it found its way to every theater of the
war. Our kit comes with all parts shown including the correct receiver cut to BATF specifications,
a very good condition MK2 barrel and 5 - .303 cal. magazines.........................................$495.00 BREN121
MK3 Parts Set w/New MK2 barrel...................................................................................$595.00 BREN125
SIG 225/226
SHOULDER
HOLSTER
German Police
shoulder holster for the SIG
225 & 226. Also referred to
as the P6 holster. Comes with
one spare magazine pouch
with belt slots. Very well made with Ox blood
finish and leather / elastic strap. Right hand
draw................................... $19.95 HOL127
WW2 37MM RUSSIAN SPADE MORTAR
Rare and truly innovative design as used
in the Russo Finn War and along the Soviet
western front. A shovel that turns into a
mortar! We have the ‘Kamabee Keep’ remake
of this item, made from steel and non-firing.
Complete with articulated spade that digs
and also acts as a baseplate when moved
to the perpendicular. Soviet infantry carried
this as a standard E-tool on their belt. You
can read more about it on our web site!
Limited production.
Mortar only...... $175.00 MISC458
Also available:
15 rd. bandolier chest rig with
Mosin Nagant pouch as worn by
Soviet troops
..........................$65.00 MISC429
Belt Carrier for the mortar
..........................$19.95 MISC421
37mm mortar round for display
......................$19.95 MISC356
ITALIAN WW2 ‘SAMURAI VEST’
WEST GERMAN POLICE
PPK BELT HOLSTER
Well made
right hand
draw undercover holster
nicely form fit
and curved.
Made for the PPK and similar sized pistols. Medium brown color. Used, but in very good condition.
Leather ‘Pancake style’.............. $14.95 HOL125
RPG-2 ROCKET
LAUNCHER
Original Com bloc RPG-2
Rocket Launcher that has
been demilled to comply with
BATF regulations. Anyone
can own this non firing,
original display piece that
is in excellent condition
otherwise. Well known for its
use in Vietnam, African conflicts, and in the Mid-East.
Read more about it on our website! Very Limited!
RPG-2 Launcher only...................................... $475.00
RPG-2 Rocket (inert) when purchased with launcher
......................................................................... $75.00
RPG-2 Backpack for holding 3 rockets.............. $60.00
Backpack with 3 rockets..................... $199.95
Highly coveted Italian
Paratrooper Assault
Vest also known as the
‘Samurai Vest’. Even
German Paratroops
tried to get their hands
on these because they
were comfortable, capable of holding lots of
ordnance and worked
well with magazines
from the Sten, Beretta
38,and MP40 SMGs.
Read more about it on
our web site. Originals
are almost impossible
to find! New made &
Limited Availability
$125.00 MISC459
NEW
ITEM
!
JAPANESE MODEL 99 ARMORED SHIELD
RL012
RL013
RL014
RL015
RPG2 Package of RPG2 launcher, backpack, Cleaning Rod,
Gunners Spares and tool set........................... $625.00 RL016
Japanese WW2
issued steel shield
as fielded in
1939 for Machine
Gunners and also
used by Arisaka
riflemen in defensive positions.
Seen throughout
the Pacific
campaign and in
China/Manchuria. Several versions were developed, and these were primarily used by Type 96
and Type 99 machine gunners, but riflemen also
used them as was seen extensively throughout
Guadalcanal. Shield has a carrying handle and
adjustable stability brace. Very few have made it
back to the U.S. after the war, but Sarco has had
the shield reproduced from an original. A smart
design and finally available for military collectors!
With some Kevlar laminates applied, this shield
could make an excellent personal combat shield
for today’s combat operations. Sold as a collectible
.............................................. $125.00 MISC443
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
AR15/M16 RIFLE PARTS
AM136 223 (5.56) Dummy Rounds from Lake City –
Original G.I. green tip......................10 for $8.95
AR098 AR Safety............................................... $10.95
AR100 AR15 Disconnector....................................$9.95
AR092 AR15 Hammer (Semi auto)..................... $15.00
AR001 AR15 Lower Receiver Parts Kit (SemiAuto)...................................................... $44.95
AR102 AR15 Trigger (Semi-Auto)....................... $17.95
AR082 AR15/M16 Action Spring..........................$4.00
AR120 AR15/M16 Action Spring (shorty style)......$4.00
AR032 AR15/M16 Barrel nut...............................$7.50
AR162 AR15/M16 Bipod Pouch New G.I. (nylon)
.................................................................$4.95
AR138
AR15/M16 Bipod with new canvas G.I. zipper
pouch with accessory pouch on side....... $13.50
AR137 AR15/M16 Bipod w/ O.D. Green Nylon pouch
.............................................................. $12.50
AR322 AR15/M16 Bipod w/o Pouch, used...........$9.95
AR060 AR15/M16 Bolt Cam Pin...........................$6.00
AR071 AR15/M16 Bolt Carrier Key.................... $13.50
AR070 AR15/M16 Bolt Carrier Key Screw............$1.00
AR106 AR15/M16 Bolt Catch...............................$7.50
AR105 AR15/M16 Bolt Catch Pin.........................$1.00
AR107 AR15/M16 Bolt Catch Plunger..................$7.50
AR108 AR15/M16 Bolt Catch Spring....................$1.00
AR057 AR15/M16 Bolt gas rings, set of 3.............$3.00
BRUSH-003 223 cal bore brushes, bronze 10 for
.................................................................$8.95
AR080 AR15/M16 Buffer .................................. $12.95
AR081 AR15/M16 Buffer Short......................... $12.95
AR15 AND M16 PARTS AND ACCESSORIES
AR087 AR15/M16 Buffer Retainer........................$2.00
AR088 AR15/M16 Buffer Retainer Spring.............$1.00
AR306 AR15/M16 Buttstock hinged trapdoor assy
.................................................................$9.95
AR307 AR15/M16 Buttstock trapdoor hinge..........$4.00
AR119 AR15/M16 Butt Swivel A1/A2...................$4.00
AR056 AR15/M16 Butt Swivel Pin........................$1.00
AR118 AR15/M16 Butt Swivel Screw M16A2........$2.85
AR002 AR15/M16 Charging Handle assy........... $16.95
AR188 AR15/M16 Cleaning Toothbrush, G.I.
.......................................... $2.00, 3 for $3.75
AR164 AR15/M16 Comb. Wrench (Original G.I.)
.............................................................. $16.95
AR104 AR15/M16 Disconnector Spring................$1.00
AR178 AR15/M16 Early prong flash hider......... $12.50
AR036 AR15/M16 Ejection Port Cover..................$7.95
AR034 AR15/M16 Ejection Port Cover Snap ring
.................................................................$1.00
AR035
AR15/M16 Ejection Port Cover Spring......... $1.50
AR172 AR15/M16 Ejection port cover pin.............$2.75
AR067 AR15/M16 Ejector....................................$3.00
AR066 AR15/M16 Ejector Pin..............................$1.00
AR068 AR15/M16 Ejector Spring.........................$1.00
AR064 AR15/M16 Extractor.............................. $10.95
AR063 AR15/M16 Extractor Pin...........................$2.00
AR065 AR15/M16 Extractor Spring......................$1.00
AR059 AR15/M16 Firing Pin................................$7.95
AR058 AR15/M16 Firing Pin Retaining.................$2.00
AR410 AR15 Fixed stock that looks collapsible
.............................................................. $39.95
AR011 AR15/M16 Flash Hider Washer.................$1.00
AR049 AR15/M16 Forward Assist, Teardrop type
SARCO DOES IT AGAIN!
Double time it and get these before
they’re gone..... Everything
present in this Kit to make
an AR15 type rifle except
for the Lower Receiver. All
parts included are new mfg
parts. Sling and magazine
are not included. Buttstock
supplied is the telescoping 6
position M4 stock with correct buffer and spring and
the 16" barrel is brand new
and has the front sight assy. installed. We use the
industry standard hammer/trigger pin with a diameter
of .154": Most Lower receivers use this size pin although
there are some Colt mfg. lower receivers that use .170" pins which are not
compatible with standard parts. The Upper Receiver is a flattop model and
we offer it with and without the carry handle/rear sight configuration.
A.KIT w/ Flat top
upper rec. w/ carry
handle and rear sight
$415.00, 3 for
$1230.00 AR150
(shown in picture)
AR111
AR15/M16 Magazine Catch Spring............$1.00
AR126 AR15/M16 Magazine Orlite (30 Round)
.....................................................$11.95 each,
AR163 AR15/M16 O.D. Web Case w/ Pouch...... $17.95
AR133 AR15/M16 Pin Kit.................................. $14.95
AR043
AR15/M16 Rear Sight Aperture, Standard
.................................................................$5.00
AR039 AR15/M16 Rear Sight Detent....................$2.00
AR040 AR15/M16 Rear Sight Detent Spring...........$1.00
AR038 AR15/M16 Rear Sight Drum.....................$6.50
AR037 AR15/M16 Rear Sight Drum Pin...............$1.00
AR046 AR15/M16 Rear Sight Spring....................$1.00
AR041 AR15/M16 Rear Sight Windage Screw.......$7.50
AR115 AR15/M16 Rear Takedown Pin..................$5.75
AR050 AR15/M16 Round Forward Assist.......... $14.75
AR130 AR15/M16 Rubberized Swivel front new.....$5.00
AR076 AR15/M16 Safety Detent...........................$2.00
AR075 AR15/M16 Safety Detent Spring...............$1.00
AR171 AR15/M16 Scope Mount Rings..................$6.95
AR095 AR15/M16 Sear Assembly...................... $20.00
AR116 AR15/M16 Sear Spring.............................$3.00
AR145 AR15/M16 Shorty Buttstock Assembly, high
strength fiberglass w/steel locking ring.. $29.95
AR134 AR15/M16 Spring Kit............................. $12.95
AR302 AR15/M16 Top sling adapter.....................$1.95
AR090 AR15/M16 Trigger Pin..............................$1.50
AR103 AR15/M16 Trigger Spring.........................$2.00
AR176 AR15/M16 Triggerguard, aluminum..........$6.75
AR112 AR15/M16 Triggerguard Pin.....................$1.00
AR006 AR15/M16A1 Birdcage Flash hider...........$6.95
AR085 AR15/M16A1 Buttcap Screw (Short).........$2.25
AR220 M16A1 Butt Swivel Screw..........................$3.00
COMPLETE UPPER KIT FOR OUR AR-RETRACTABLE STOCK
CARBINE
As shown to the left all
parts but lower receiver
parts and buttstock assy
parts $365.00, 3 for
$1079.00 AR335 This is the
flat top upper with detachable
handle.
PLEASE NOTE: Building an AR15 requires technical skills. Be
sure you are qualified before
you build or seek a professional gunsmith.
BEST DEAL ANYWHERE!
NEW!
ITEM
New production in the white!
Completely profiled and
perfect for a retro or contemporary
AR build! This has the lean ‘pencil
profile’ and is ready for the installation of the front sight post & drilling
of the gas hole. 1 in 12 twist, 5.56
cal., and made in the USA
...........................$145.00 AR201
COMPLETE M4/AR15 16"
BARREL
Complete 16 inch .223 ‘Wylde’ barrel
with 1 in 9 twist. Ready for installation....................... $125.00 AR426
AR15 ACCESSORIES
Cleaning rod 4 pc. CLN030............... $6.95
Muzzle Cap (plastic) AR192
...................................................... $1.50,
3 for................................................ $2.75
Stripper clip guide STC005................ $1.50
Magazine dust covers AR199
3 for................................................ $2.00
M16 G.I. cleaning “toothbrush” orig. G.I.
issue. AR188...................................$2.00,
3 for................................................ $3.75
SPECIAL - one each of all 5 items above.
AR321.............................................. $8.95
M16A2 PEEL OFF FLASH HIDER
WASHERS
AR358............................................. $7.95,
3 for............................................. $18.95
AR DELTA RING REMOVAL TOOL Makes
handguard removal simple AR326.... $8.95
FLASH HIDERS
1.M16A1 $6.95 AR006
2.M16A2 $8.95 AR007
3.Early 3 prong type flash hider
$12.50 AR178 Not for sale in NJ
AR /M16 ARMORER'S KIT
COMPLETE BOLT CARRIER
ASSEMBLED
$125.00, M16 AR264 AR15 AR263
3 for $360.00
SPECIAL SALE!
$110.00, 3 for $299.00
IT’S A SALE ON SALE!!
$99.95, 3 for $285.00
Be ready
when the time
comes! Quality tool set
for removal
& installation of parts.
Easily worth
the cost just
for the quality vise block set! INCLUDES
- VISE BLOCK, DELTA WRENCH, TOOL
BRUSH, GI COMBO TOOL, BROKEN
SHELL EXTRACTOR, BORE & CHAMBER
BRUSHES, 1 SIGHT TOOL, CLEANING
ROD SET $91.50 value for just
........................................$59.95 AR373
We have done the hard work
for you. These are fully assembled upper halves complete and ready to drop on to your complete lower. All parts made in the
U.S.A.! Includes Flat Top Upper, barrel assembly, complete bolt and carrier
assembly, charging handle assembly, forward assist and ejection port cover
assembly.........................................................................$359.00 AR013
Add ons: Kit with carry handle, rear sight assembly........ $389.00 AR014
Add ons: Lower parts kit and collapsible stock and
carry handle................................................................. $449.00 AR117
9MM AR-15 CONVERSION SET
Consists of a complete
upper flat top barreled
receiver with a rail gas
block in place of the front
sight, custom flash hider,
mag well adapter and 30
rd. magazine. (Deduct $15
from kit if you live in a state where you cannot have the magazine). Flash
hider is permanently attached to the barrel. Made in the USA.
...................................................................................... $595.00 AR395
(See Hi Cap Mag restrictions on page O)
AR15 & M16 MAGS
Orlites & Orig Colt & others – See
our e-sarcoinc.com for sales on these
items
NEW M16A2 ROUND HANDGUARD
SETS MILITARY PRODUCTION
Shortie length
w/liner $14.95 AR185
HIGH QUALITY AR/M4 CARBINE LENGTH QUAD RAIL HG
SYSTEM
$34.95 3 FOR
$94.50 AR145
Super price! Includes all parts shown except
for the receiver. Comes with late model pistol
grip and our hammer & trigger pin diameter
is the industry standard at .154. Some Colt
made guns use a .170 diameter which is
not compatible with our parts. Compare our
‘Shocktober’ price!.....................$44.95 ea.
Or 3 for........................................................................... $129.95 AR001
• Bore brush
• Chamber brush
• Cleaning rod
• Broken shell
• Tooth brush
extractor
•Oiler
• Stripper clip guide
• Muzzle cap
• Grenade launcher
• Dual front sight tool
Tension band
$17.50, 3 for $49.95 AR240
AR205 AR15/M16 chamber brush.......... 2 for $3.95
AR141 M16 Original G.I. Buttstock, plus lower receiver
extension, buffer and spring...............$59.95
COLLAPSIBLE AR-15 CARBINE STOCK
AR15 LOWER RECEIVER PARTS SET
AR15/M16 CLEANING KIT
& ACCESSORY KIT
AR018 AR15/M16A1 Frong Sight Post..................$5.00
AR142
AR15/M16A1 G.I. Buttstock w/trap plus lower
receiver extension, buffer, & spring........ $59.95
AR073 AR15/M16A1 Pistol Grip (Used)............. $12.50
AR228 AR15/M16A1 Complete Rear Sight Set... $20.00
M16A1 Rear Sight Assy. Includes the correct A1 aperture.
Getting hard to find!............................... $19.95
AR157 AR15/M16A1 Sight Tool (5 Prong).............$4.95
AR214 AR15/M16A2 Burst Trigger.................... $15.00
AR143 AR15/M16A2 Buttstock Crnt Prod. Comes
with buffer, spring & all hrdwr milspec... $54.95
AR007 AR15/M16A2 Flash hider..........................$8.95
AR144 AR15/M16A2 New Buttstock (Current
production) stripped............................... $34.95
AR074 AR15/M16A2 Pistol Grip new....................$8.95
AR158 AR15/M16A2 Sight Tool (4 Prong).............$4.90
AR091 M16 Hammer......................................... $15.00
AR424 M16 Front Sight Base, Early.................. $23.75
AR127 M16 Magazine 6 Orlites w/ Carriers....... $59.95
AR317 M16 port firing gun safety plate – new G.I. in
package.................................................. $24.95
SLNG099 M16 Single Point Sling, BLACK............. $17.95
SLNG100 M16 Single Point Sling, GREEN............ $17.95
SLNG101 M16 Single Point Sling, SCORCHED DARK
EARTH................................................... $17.95
AR399 M16A2 Buttplate used good
......................................$3.95, 10 for $29.95
AR358 M16A2...... Peel off flash hider washers. Used take
off. Work fine.............................................$7.95
$38.95 AR384
Other sell for up to
$150.00 or more
M4 16" COMPLETE BARRELED FLAT TOP UPPER ASSEMBLIES
B.KIT w/ Flat top
upper rec. without
carry handle & rear
sight $389.00, 3 for
$1155.00 AR224
20" 5.56 AR-15 BARREL
.............................................................. $21.50
AR047 AR15/M16 Forward Assist Pin..................$1.00
AR048 AR15/M16 Forward Assist Spring.............$1.00
AR077 AR15/M16 Front and Rear Takedown Detent
Spring.......................................................$1.00
AR078
AR15/M16 Front and Rear Takedown Detent
.................................................................$1.00
AR079 AR15/M16 Front Pivot Pin........................$4.95
AR020 AR15/M16 Front Sight Detent...................$2.00
AR021 AR15/M16 Front Sight Detent Spring........$1.00
AR024 AR15/M16 Front Swivel Pin......................$1.00
AR023 AR15/M16 Front Swivel Rivet...................$1.00
AR029 AR15/M16 Gas Tube 16" (Shorty).......... $11.95
AR028 AR15/M16 Gas Tube 20" (Standard)...... $13.50
AR027 AR15/M16 Gas Tube Pin...........................$1.00
AR072 AR15/M16 Grip Screw & Washer..............$1.00
AR089 AR15/M16 Hammer Pin............................$1.50
AR093 AR15/M16 Hammer Spring.......................$2.00
AR275
M16/M16A1 Handguard, new Colt (Right)
.............................................................. $14.95
AR005 AR15/M16 Handguard (Right) Used $10.00
AR025 AR15/M16 Handguard Cap (Triangular)
.................................................................$6.95
AR033 AR15/M16 Handguard Slip Ring (G.I)........$7.50
AR030 AR15/M16 Handguard Snap Ring.............$2.50
AR031 AR15/M16 Handguard Spring...................$6.00
AR083
AR15/M16 Lower Receiver Extension..... $20.00
AR165 AR15/M16 Mag Carrier.............................$1.50
AR109
AR15/M16 Magazine Catch.......................$7.50
AR200 AR15/M16 Magazine Catch Assembly.... $10.00
AR177 AR15/M16 Magazine Catch Button, metal
.................................................................$2.50
B2
M4 stock set with handguards &
pistol grip............... $50.00 AR316
New M16A2 or M4 pistol grip
................................ $8.95 AR074
ORIGINAL U.S. AIRFORCE .22
LONG RIFLE CONVERSION UNIT
for more M16 with Teflon magazine-1 or 2
only! Super Rare........... $350.00 AR425
EXTRA MAGAZINES FOR THE G.I.
M261 .22LR CONVERSION UNIT
FOR THE AR15
$24.95 ea. M26120
This is the end of these Send $1.00 for
complete list of our M261 parts (M26122) M261
manual (few only) - $4.95 M26121
See e-sarcoinc.com for a spare parts put-away kit for
the M261 kit
• Six Positions • Precision machined
Parts for Maximum Strength • Super
Quality Aluminum Buffer • Includes
complete stock assembly w/ buffer &
recoil spring. • Reinforced grids Black
(AR145)
SPECIAL SALE ON
UPPERS! BEST PRICE EVER!
WE GOT A GOOD BUY!!
AR FLAT TOP A4 UPPERS
Many choices to suit your needs.
A: Stripped flat top upper....... $48.95 AR196
B: Stripped Flat Top Upper with our complete
A-4 carrying handle assy. (includes complete
A2 rear sight assy).................$74.95 AR202
C: Stripped flat top upper with M4 carry
handle assy and also ejection port cover assy
and forward assist assy.......... $94.95 AR204
M4 AR15/M16 RECEIVER CARRYING
HANDLE AND REAR SIGHT ASSEMBLY
Fits Flat Top Upper reciever with Picatinny Rail.
Complete with M16A2
rear sight assembly.
AR180
SPECIAL SALE!
$29.95,
3 for $84.95
M16 AUTO SEAR
Orig U.S. G.I. exc cond. Few only
..........................$19.95 AR095
Buy a replacement(s) for your
legal M16. All NFA rules apply.
Note: These go out of time with use.
M16 BOLT CARRIERS
Just Came In The Door!!.......... $65.00
3 for........................... $180.00 AR229
SPECIAL SALE!
$49.95, 3 for $139.95
*****Original USGI*****
EARLY VIETNAM ERA M-16 STOCK SETS &
TRIANGULAR HANDGUARDS
1. Early Stock without trap door and with
rubber buttplate; good condition / no cracks
............................................$35.00 AR146
2.Original M16 Pistol Grip......... $9.95 AR364
3.Original Triangular Hand Guard Set
............................................$35.00 AR318
4.Set of early stock, triangular hand guard set,
and early pistol grip. Good condition, no
cracks..................................$69.95 AR255
M16-A1 STOCK SET
5.
6.
Original M16A1 stock with buttplate & swivel
................................................ $37.50 AR411
Complete set of M16A1 stock, triangular
handguards and pistol grip...... $ 69.95 AR412
ITALIAN POST WAR GARAND BM59 RIFLE PARTS SETS
BASIC BM59 KIT
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
SHOULDER HOLSTER ‘MID FRAME COMPACTS’
This kit includes all the unique BM59
parts – all other parts are interchangeable
with Garand. This allows you to get your
Last Chance! Price is about to go up!
basic kit at an affordable price and you
can acquire the Garand type parts by shopping or trading around but this will
let you get your kit stashed.Stripped BM59 bolt, original muzzle break, trigger
housing with mag catch assembly, bolt hold open with pin & spring, operating
rod, operating rod spring and guide, safety spring, stock, rear handguard, front
cartridge guide & magazine catch & pin, barrel (good VG cond) and magazine. All
other parts are interchangeable with Garand....................... $489.00 BM59030
SPECIAL OF THE MONTH...............................................................$395.00
Light West German Police Shoulder Holster for various ‘mid frame’
pistols like : Sig P238, Sig P938, Mauser 1910, Colt 1903
Hammerless, S&W Bodyguard, Colt Mustang XSP, Beretta PICO,
Keltec P32, Remington RM380, etc. and many others. Canvas
straps with strong leather reinforced junctions and holster body.
Has spare magazine pouch attached. Original, in excellent
condition.......................................................... $19.95 MISC490
M14 PARTS & ACCESSORIES
NEW G.I. SPEC M14 & M14A BOLTS WITH ROLLER
These are New production Rockola forged bolts to original GI blueprint and heat treat. 8620 H Steel/#719-0185 GI print. Heat treat
spec A-Z-2M47512. Fully Military compliant part check the TALK
boards....$175.00 M14155 (ORDER EARLY THESE WILL FLY OUT)
NEW!!! M14 BARRELS IN
STOCK
NEW
ITEM!
Brand new .308 cal M14 Barrels made by
one of the best U.S. barrel
manufacturers $175.00 ea. M14124
M14 FLASH HIDER PLIERS
Available once again. New condition. A
necessity for your M14 ensemble
$16.50 ea. TOOL039
M14 STRIPPER CLIPS
7 original clips for $9.95 STC016
Note: See our 1st of the month
ad or our E-com site for M-14
Magazines.
M14 FLASH HIDERS W/BAYO LUG
ORIGINAL G.I. TRW M14 RECOIL
SPRINGS
ORIGINAL G.I. M14 BUTTPLATE SETS
Also work of course in all semi autos.
Just in the door...................... $7.45,
5/......................................... $29.95,
10/............................$49.95 M14052
NM SIGHT & APERTURE BUYERS
PLEASE NOTE:
The aperture is made oversized to be fit to your
sight base. The procedure is simple & instructions are included. See our website for the
instructions if you wish.
National Match Rear
Sight Aperature
Your choice of .520 or
.595 diameter
$39.95 M14127
7.62MM BROKEN SHELL EXTRACTOR
$5.95 BSE002
M14 RIFLE CLEANING KIT
Kit consists of following items:
G.I. sectional
cleaning rod,Rod handle/
combination tool
Ratchet chamber
brush, .30 cal. bore brush
G.I. carrying pouch $12.50
3 for $29.95 CLN070
M14 SPECIAL ITEMS
1. M14 gas cylinder (Chinese)........$29.95 M14108
2. G.I. M14 connector rod.............. $14.95 M14049
.........................................................3/$36.50
3. G.I. front stock swivel set, new.....$8.95 M14117
4. National Match front swivel....................$23.75
5. M14 E2 stock liner set (front grip mounting
kit) G.I. new in package contains liner Grip
hinge base, screws & plugs
..................................................... $64.50 M14113
6. New bolt rollers.......................... $4.95 ea M14060
7. M14 bolt with roller, new............. $175.00 M14155
9. M14 bolt roller with retaining clip.....$7.95 M14352
10. M14 bolt roller retaining clip.............. 3.95 M14158
See our website for other M14 parts
Found a few more...
M14 G.I. “SPOTTY BOLTS”
Out of parade rifles – Spot weld in firing
pin hole and rear – last of the 1000 we
had. $39.95 M14147 While the few last
DELUXE M14/M1A
SNIPER SCOPE MOUNT
This M14/M1A Tactical Scope Mount with 3 Point
locking, mounts easily to the charger guide Dovetail
and Receiver mount lug. It also has open sight channel
that lets you use your iron sights. The top feature of
this mount is that it has a rigid 3 point mounting for
both rigidity of the scope system plus maintenance
of Zero. Special Value $24.95, 3 for $69.95 M14012
Rings ...................................................$4.95 SCP007
Set of rings & mount.....................................$27.95,
3 for.................................................$79.95 M14010
M14 ORIG G.I. FLASH HIDERS
Found a few only!...$89.95 M14157
(Note: BM59 prints are for the full auto only and are for dimensional reference only. They are also non returnable)
Just got a great report from a customer who built one of our BM59 kits on a Garand receiver with our
parts It came out FABULOUS
Original BM59 Mags $59.95 BM59-001
Extra mag with above kit $49.50 ea.
Last Chance! Price is
about to go up!
BM59014
AMERICAN GARAND
BRAND NEW M1 GARAND
BARRELS… Currently
produced in USA by a 30
Year Top Line Barrel MFG
.30-06 and .308 caliber
barrels in stock !
Newly manufactured barrels ready to install
on your M1 Garand Receiver. Made by one of
the premier barrel manufacturers in the USA,
these .30-06 caliber barrels and .308 barrels
are manufactured from 4140 steel with 4 groove
rifling and a 1 in 10 twist. Beautiful high quality parkerized replacement barrels. Because
they are made here in the US, they do not have
the ungainly import barrel markings. A great
chance to get rid of that ‘Blue Sky’ or other
import marked barrel and also restore accuracy!
Barrels should always be installed by a qualified
gunsmith.
.30-06................................. $149.95 GRD157
.308..................................... $149.95 GRD158
Mix or Match 3/.................. $429.95 GRD337
Please specify when ordering
In stock again! New Production
$29.50 M14079
Complete buttplate & the 2 screws
........................................$24.95 M14143
M1 GARAND KITS
Almost sold out! All parts but barrel &
receiver, and op rod catch & clip latch.
Good condition & serviceable. Some
parts are new. G.I. walnut handguards
included. G.I. walnut stock. Gathered a
few more......................$580.00 GRD331
Also have a selected kit – metal parts are
personally selected – wood is same as
above......................... $610.00 GRD332
7.62 NATO (.308) M1 GARAND KIT
All parts but receiver and op rod catch & clip latch
– for 7.62 NATO – Stock is exc to new, barrel is
rechambered in 7.62 NATO by shortening a G.I. barrel, G.I. handguards are new walnut, system is 1/2"
shorter due to NATO Round. Note: These are chambered for 7.62 NATO +.308. The NATO is a slightly
deeper chamber. Small lot $580.00 GRD333 Hand
select $610.00 GRD334
ADD A NEW .30-06 BARREL FOR $130.00
when you purchase one of our Garand kits
(Barrels (GRD157) are regularly $159.95)
US Made by old
school barrel maker
M1D GARAND SNIPER RIFLE KIT
A $942.00
Value !
A REALIZED DREAM FOR SARCO & OUR
VALUED CUSTOMERS!
Convert your M1 Garand into a military
grade M1D Sniper Rifle or build your own
M1D with our M1D Garand kit which
includes a new M1D Barrel with mounted
scope Block, Scope ring mount, T37 flash
hider, M84 scope with rubber eye piece,
Handguard, and leather Cheekpiece. Everything you need, to make the sniper rifle
you’ve always wanted. We also include an
original M84 data plate for the scope.
Bound to satisfy you on the range and
increase the value of your rifle too! These parts are normally quite expensive on their own! Barrels
are short chambered as per military specs, so make sure a Gunsmith checks the final assembly. Very
limited quantity in stock now....................................................................................$649.95 GRD335
Complete kit at an unbelievable price!
AVAILABLE AGAIN M14
FULL AUTO PARTS KITS
M14
M14
M14
M14
M14
Selector, Pin & Spring
Selector Shaft
Sear Release
Connector Rod Full Auto
Selector Lock...............$39.95 M14014
WORLD WAR I & WORLD
WAR II PATTERN U.S.
LEATHER RIFLE SLINGS
These beautiful recreations of the old style leather
slings are made to the standard U.S. M1907pattern, as used on all the U.S. military rifles since
the turn of the century. These are the proper
slings for use on all of the following arms:
M1903 Springfields
M1 Garand
M16
M1917 “Enfields”
Military “Trench” Shotguns
M14
Made from good quality leather with brass or
steel hardware, and marked with proper style
WWI or WWII markings and dates; these slings
will enhance that special old rifle in your collection. Specify when ordering:
1. WWI Model 1907 Sling (w/brass hardware and
WWI date)........................................... SLNG024
2. WWII Model 1907 Sling (w/steel hardware and
WWII date) SLNG025
.......................... $16.95 ea., 3 for $47.95
USGI M14 STOCK ASSEMBLY
Very good condition M14 walnut
stocks with buttplate assembly
with shoulder rest and sling mounts. Can still see the
National Defense cartouche marking. Some minor dings & blemishes,
but overall highly serviceable and the best we’ve had in years!
....................................................................................... $75.00 M14354
K2
These are all of the parts except the receiver for the early model 7.62mm Italian BM59SL
rifle. This rifle is essentially a standard M1 Garand semi-automatic that has been modified to use
20 rd. BM59 magazines, and has been chambered for 7.62mm Nato ammunition. It retains the
well proven Garand sights, trigger mechanism and gas system, while doing away with the 8 round
Garand clip in favor of a 20 round detachable box magazine. These parts sets can be assembled on
an M1 Garand receiver which will require a few modifications to accept the new feed system. Parts
are in very good condition, bores are nice.....................................................BM59002 $595.00 ea.
You can convert a Garand receiver. Set of blue prints for BM59 receiver: With kit.......$29.50 BM59003
Without kit......................................................................................................... $49.50 BM59004
U.S. MADE
BARREL!
M1 TANKER GARAND BARRELS
HAVEN’T BEEN AVAILABLE FOR YEARS!
Brand new and made by one of America's premier barrel manufacturers. Parkerized and
ready to install. Length 18.25 inches. .30-06........................................$129.95 GRD004
.308......................................................................................................$129.95 GRD336
M1 GARAND ACCESSORY PACK
Terrific set of accessories for the Shooter
or Reenactor! Made up of both original
and reproduction items, the Pack
includes the following items:
NEW!
GARAND GUN CASE
GARAND CARTRIDGE BELT
MILITARY MANUAL
M10 CLEANING SET w/brush
CHAMBER BRUSH
SNIPER CHEEK PAD
1 QUART OF LSA - MILITARY GUN
LUBRICANT
CLEANING ROD STOP
USGI DUMMY .30 RD
3 EN-BLOC STRIPPER CLIPS
M15 G.L. SGT.CASE
PULL THRU ROD &
CORD
ITEM
COLLECTOR GARAND PARTS:
Winchester, HRA hammer GRD231
...............................................$40.00
HRA gas cylinder lock screw GRD236
...............................................$30.00
HRA windage knob GRD237.........$35.00
HRA safety GRD238.....................$40.00
Win. Trigger housing reparked Stripped
GRD152....................................$65.00
Milled stock ferrule w/swivel GRD174
...............................................$40.00
Bullet guide, post war stamped GRD248
...............................................$10.00
Bullet guide, post war stamped with
thumb notch GRD249...............$15.00
ALSO: Your choice of
1907 Leather Sling or
Canvas WW2 style sling.
Specify when ordering.
A Retail Value of over
$145.00 For Just…
$79.95 GRD329
***A great gift for a
Garand owner!***
GARAND BROKEN SHELL EXTRACTORS
Dual use for .308 (7.62x51) and .30-06................................................... $5.95 BSE013
FRONT HALF G.I. M1
GARAND RECEIVER
$14.95, 3 for $39.95 GRD143
Neat paper weight!
M1D BARREL WITH MOUNTED
SCOPE BLOCK
Just in, new M1D Garand barrel ready to
install and mount your scope. U.S. Mfg!
........................................ $249.00 GRD159
NEW ITEM!! M1D BARREL BLOCK
(the base for the barrel) fully
machined from solid billet – 100%
like the original and to the G.I print
$89.95 GRD316 Investment cast M1D barrel
block $59.95 GRD113
M1 GARAND CLIPS
Current Production
By U.S. Government Contractor - GRD275
5 for....................................................... $9.95
10 for...................................................$14.95
20 for...................................................$24.95
40 for...................................................$45.00
Nice fresh spring tension in your clip
SPECIAL GARAND CLIPS
1.2 round clip for match shooters.....$8.00 ea,
5 for........................................ $24.95 GRD131
2.5 round hunting clips
................... $8.00 ea, 5 for $24.95 GRD130
COMBO. New Style M3A1
TOOLS WITH
CHAMBER BRUSH
The Latest and best.
A. Used G.I.................... $19.95 GRD134
B. Like new tool w/new brush
................................. $24.95 GRD138
C. Absolutely New G.I. WWII original tool
in orig G.I. grease & package (no brush)
.................................. $29.95 GRD165
USM82 SNIPER SCOPES FOR
THE M1C & M1D & 1903A4
SPRINGFIELD, WWII &
KOREAN WAR SNIPER RIFLES
Beautiful exact repro with original markings for the Griffin & Howe M1C mount
or the M1D scope mount. See info below
............... $399.00 $499.00 SCP040
7/8" diameter tube, crystal clear optics,
tapered post reticle, polished blued finish, sliding sun-shade and a rubber eye
cup. All of the major components are
stamped with military part numbers and
the tube is stamped with period serial
numbers and stock numbers. Each scope
comes factory set to zero/300 yards.
Note: We have been able to reduce the
price of our M82 scope by $100.00
M1 GARAND BLANK ADAPTER
GRD126 U.S. G.I. pattern, new..... $7.95
3 for.........................................$21.95
GRD161 NATO pattern................. $5.95
5 for.........................................$24.95
For bulk pricing on Garand BFA’s call
Mark, Dave or Cholly
LATE T-37 M1 GARAND SNIPER
FLASH HIDER
$34.50 GRD111
MI GARAND CLEANING KIT
Kit contains M10 cleaning rod, bore
brush and a G.I. carrying pouch. CLN064
$17.49 3 for $49.50
Handle for M10 cleaning
Rod for Garand Rifle –
hard to find $7.95,
3 for $22.50 CLN047
Orig G.I. M10 handles
..........$9.95 GRD281
D2
M1 GARAND PARTS
& ACCESSORIES
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
ORIGINAL WW2 ERA GARAND STOCK W/ MARKINGS
Finally found some original USGI stocks with good cartouche markings from the
manufacturers. The stocks have original markings and although the stocks have some
dings and dents, nothing major and in good general condition. May be your last chance
to obtain original marked stocks. We have the following markings available. We have
posted the serial number range for you to check against your rifle’s serial number.
GRD342 GRD343 GRD344
GRD341 S.A. S.A. S.A. S.A.
G.A. W. E.McF. J.L.G. N.F.R.
#1,860,001- #700,001- #4,200,000- #3,200,0013,200,000 1,860,000 4,350,000 3,890,000
$295.00 $295.00 $295.00 $395.00 (few)
****Note: Add $25 Per stock for special selection of best available.
Also have a supply of standard unmarked M1 Garand stocks: Same general condi­tion
as our marked stocks, but without markings. Stocks will have some dings and minor
dents. Good condition $80.00 GRD024, Average condition $60.00 GRD027
WWII U.S. PATTERN CLEANING ROD CASES
WITH WWII STYLE BELT HOOKS
These are nice as they have leather straps
ing – new – show some storage
For M1 Carbine rod................... $12.50
For M1 Garand rod.................... $12.50
Special – 1 of each..................... $21.95
NEW!
ITEM
& edgCLN117
CLN118
CLN119
LATE PLASTIC WWII OILER—G.I.
NEW $13.95 Few Only OIL035
ORIG WWII G.I. M1 GARAND KHAKI
CLEANING ROD POUCH
New cond. Few only WWII markings.
Found in warehouse $14.95 GRD299
PARTS FOR .308 (7.62x51) CAL M1
GARAND ORIGINAL .308 STOCK
New and like new............................................. $59.95
3 for................................................. $149.95 GRD028
Front and rear handguard set, new......$37.50 GRD274
ORIGINAL G.I. M1 GARAND BOLTS
See our K Page for more
Garand parts
Stripped........................ $69.95 GRD070
Complete....................... $89.95 GRD071
M1 GARAND & M1 CARBINE GRENADE
LAUNCHER SIGHT with pouch. Orig G.I.,
brand new.......................$9.95 MISC062
G.I. Sight pouch only.......$3.95 MISC262
G.I. Mounting jig for installing base to
gun – rare, original....... $40.00 MISC263
WWII M1 GARAND RIFLE
LEATHER SCABBARD
These leather scabbards were used by horse
cavalrymen and truck and jeep drivers.
These heavy leather scabbards have the
tunnel to cover the operating rod handle
and two leather carrying straps with brass
hardware. Perfect reproduction.
SALE $59.95 each
GRD137
Original G.I. new sling keepers for
Springfield and Garand 1907 leather
slings – buried for years. $5.95 ea,
2 for $9.95 SLNG067
Available Again –
Ratchet chamber
brushes for the
M1 Garand......................$4.95,
3 for............................... $9.95
.30-06 cal TOOL044
1.
2.
3.
4.
M1C/M1D SNIPER PARTS
M1D rear handguard New G.I. original
GRD033................................................. $25.00
T37 flash hider GRD111......................... $34.50
M1D barrel block GRD113...................... $59.95
M1D scope mount GRD112.................... $47.50
Orig. Brass oil & throng set, exc. condition.
OIL015 ............................................$35.00
Orig plastic oil & throng set, used exc.
condition OIL016 ............................... $8.50
•
•
•
•
•
•
•
•
•
GARAND ACCESSORY KIT
Perfect new leather sling
Orig. late oiler
Orig. combat cleaning throw
Cleaning brush
Front & rear sight cover
10 – 8 shot clips
Orig. WWII accessory pouch
Cleaning rod buffer
G.I. type carrying case
$70.00 value $49.95 GRD172
M1D SCOPE MOUNT
Price reduced! Only $47.50
Scope mounts for the M1D Garand
Sniper rifle. These are for the 7/8" diameter
M81 - M82 - M84 Scope. New condition. GRD112
ORIGINAL G.I. WWII M1 GARAND
SLOTTED COMBINATION TOOLS
In the original G.I. wrapper. Been
buried for 10 years. While the few
last - $29.95 TOOL016
A perfect reproduction of the
grenade launching rubber boot
(slip on) for the Springfield and M1
Garand. Absolutely meticulously
beautiful!!.......... $34.50 MISC088
M1 GARAND GAS CYLINDERS
U.S. G.I. Gas Cylinders, not
foreign made replacement
parts.
2A.Serviceable grade, gaged for functionality.
Sarco’s Price ONLY GRD096
......................................... $85.00 each
2B. Refinished, serviceable. $99.95 GRD097
SPECIAL THIS MONTH!
Free original G.I. M84 scope data plate
with each M84 scope purchase!
M84 TELESCOPE SIGHTS FOR
THE1903A4 SPRINGFIELD &
M1D GARAND SNIPER RIFLES
A Mil-Spec reproduction of the original – produced by a company that produced these scopes
for a military contract years ago. Used original
drawings for the production. Comes with rubber
eye shield & date plate. Factory c
............................................. $399.00 GRD260
Add on deals:
A. M84 scope with M1D scope mount
............................................. $434.95 GRD261
B. M84 scope with M1D scope mount & scope
mount barrel block................ $479.95 GRD262
C. M84 scope with M1D scope mount, barrel
block, orig. G.I. new M1D rear handguard, sniper
cheek pad & T-37 prong sniper flash hider
............................................. $549.95 GRD263
M84 repro scope buyers from other sources-we
have original G.I. unnumbered M84 sccope data
plates from Libbey Owen Ford (the manufacturer)
NOS..........................................$24.95 M84014
Rubber eyeshield for M84 scope. Current production...........................................$14.95 M84055
Special new low price. GRD124
Exact repro with proper markings
$18.95 3 for $49.95
Go to our websites for a complete selection of Garand bolts by maker and dash
variation. We have sorted out 13 variations – we even offer heat treat lots for
serious collectors.
COMPLETE SET OF M1
GARAND STOCK HARDWARE
All cleaned up and reparkerized. Buttplate
w/screws, rear swivel, stock ferrule &
swivel assy $39.95 GRD136
Hardware Set same as above but Not
reparkerized… $33.50 GRD213
SPECIAL M1D SNIPER COMBO SET
New G.I. Handguard
T-37 Flash hider
Cheek Pad
Barrel Block
Scope Mount
Value $200.00. GRD145 SPECIAL $149.50
The stocks are new walnut G.I. stocks that were .308 cal & we converted them to .3006. Fit is perfect for .30-06. There is a tiny hairline from the conversion that is visible.
Handguards are new production walnut.
Complete stock set (wood only)............................ $59.95, 3 for $169.95 GRD278
Quantity purchases, please call Cholly. Will trade on quantities
Original USGI unissued Sight,
Carry Case, Mounting Elevation
Bracket, and instructions from
1944. This sight was used on
the Garand, M1 Carbine, and
1903 series Springfield Rifles
................................................. $9.95 MISC062
Or….. Add the original metal Jig used to set the
sight correctly on the Springfield and M1 Carbine.
Sight set above with the Jig (shown in the picture ).
................................................ $39.95 MISC420
M1 STAINLESS STEEL GARAND OP ROD SPRINGS
The Best On The Market!
Just got a new fresh shipment made from G.I. blueprints. Replace
your tired spring or put away a spare now! Stainless Steel 17-7
....................................................................$7.45, 3 for $19.95 GRD171
Standard Music Wire Spring............................................................. $5.95,
3 for...................................................................................$14.95 GRD296
GARAND SNIPER LEATHER CHEEKPAD
BRAND NEW GARAND STOCK & HANDGUARD SETS IN WALNUT
M15 GRENADE LAUNCHER SIGHT SET
NEW!
ITEM
M1 GARAND BRAND NEW BUTTPLATE
ASSEMBLY $29.95 GRD220
‘BLACKOUT BLOWOUT’
‘300 Blackout ammunition at super
savings!
147 grain, full
metal jacket.
$14.99 box of
20rds. (1 box )
AM156
$69.95 per 100 rds (5 boxes)
$124.95 per CASE (200 rds.)
RARE M1A2 GRENADE ADAPTER
FOR U.S. SERIES OF GRENADE
LAUNCHER (ALSO MANY
EUROPEAN)
New condition.........$24.95,
3 for $69.95 Grenade not
included. MISC124
M1 GARAND OPERATING ROD
TIPS (pistons)
Brand new, made to Government
specs. Replace your worn piston diameter .5265” (high end + .0005") Made
of the proper 174PH steel........... $9.95,
3 for............................ $22.95 GRD211
.45 LONG COLT: AM152
255 gr, lead cowboy loads. 50 rds/boxq.. $34.99
OR 100 rds............................................. $59.95
.45 ACP: AM153
230 gr, full metal jacket. 50 rds/box....... $19.95
OR 100 rds............................................. $34.95
ALSO...
.30 CARBINE: AM149
FMJ, 110 gr., (ARMSCOR) 100 rds.......... $39.95
OR 1000 rds.............................................$349.50
NEW WALNUT FRONT AND REAR
HANDGUARD SET
With metal ................................ $32.95 GRD051
Without metal ........................... $24.95 GRD210
ORIGINAL WWII GARAND & M1CARBINE
G.I. canvas muzzle cover with strap $8.95
MISC047
M1923 (WWII Style) U.S. CARTRIDGE BELTS for M1 Garand
The standard 10-pocket with
cartridge belt as used during
W.W.II to carry .30-06 ammo
for the M1 Garand and M1903 Springfield Rifles. Each belt has 10 individual pockets which
can hold 2-5 round stripper clips or 1 - M1
Garand 8 rd. clip of ammo. The pocket flaps
are secured with typical lift-the-dot fasteners.
Belts are adjustable for waist size, and each
belt has many metal grommets for attaching
G.I. bayonet scabbards or other items of field
gear. Nicely marked “US” on the front pocket.
Belts are made from heavy webbing, dyed the
proper greenish/khaki color. Our belts are in
new condition. SPECIAL SALE!!! $19.95
ea. 3 for $54.95 GRD125
tion $46.50 GRD085
.30 CAL BORE BRUSHES
Normal .30 cal bronze
brushes
10/$9.95,
50/$39.95, 100/$69.95 BRUSH-001
Stainless steel bore brush fur cleaning those
tough military bores 5 for $8.95 CLN120
WWII PATTERN WEB SLING
Just reproduced for U.S. complete w/
markings. OD with all proper metal fittings
– Beautiful. Also proper for Springfield &
Enfield $9.95, 3 for $28.45 SLNG057
WORLD WAR II PATTERN
M1 GARAND CARRYING CASE
WWII military style canvas carrying case
for the M1 rifle. These “U.S.” marked cases
are made of heavy, olive drab canvas and
equipped with a zipper, leather tabs and a
shoulder carrying strap. GRD115
..................... $14.95 ea., 3 for $42.95
Also have some USMC marked covers
....................................... $14.95 GRD347
M1 GARAND BUTTSTOCKS
These are original U.S./G.I. walnut stocks, some in especially choice condition.
Several grades available (these are the wood butt stocks only, no handguards or
metal included).
Good to very good condition, has seen some use, but no abuse. Original finish, no
cracks, nice walnut, much better than average stocks GRD024............... $110.00
M1C/M1D Sniper Stocks, We found a small lot of sniper stocks mixed in with the
excellent condition reworked stocks described above. These sniper stocks have two
small screw holes in the bottom of the stock where the sniper cheek pad would
have been attached. GRD026 – These stocks are not marked
The cheek pads are not on these stocks, just the holes are present
GRD026$...........................................................................................145.00
Same stock with open box/SA inspectors mark ZZ2 ............................. $225.00
G.I. butt stock, average used condition, no cracks, might have minor chips on
edges GRD027............................................................................................$75.00
M1C/M1D stock as above with arsenal repair, no markings......................$89.50
EMCF stock.................................................................................. $350.00 & up
GAW stock.................................................................................... $350.00 & up
HRA stock.................................................................................... $225.00 & up
Original .308 (7.62 NATO) Garand stock, new G.I......................................$59.95
ORIGINAL NEW G.I. GARAND OP
ROD SPRING
Found some more in warehouse.
$7.50 3/$19.95 GRD059
NATIONAL MATCH REAR SIGHT
APERTURE
Your choice of .520
or .595 NM aperture.
$39.95 GRD089
Also for M14
NM SIGHT & APERTURE BUYERS
PLEASE NOTE: The aperture is made
slightly oversized to be fit to your sight
base. The procedure is simple & instructions are included. See our website for the
instructions if you wish.
AMMUNITION
38 SUPER: AM148
FMJ, 124 GR., (ARMSCOR) 100 rds
.............................................................. $34.95
OR 1000 rds.........................................$299.50
9mm LUGER: AM147
Ball ,FMJ,124 gr. (ARMSCOR) 100 rds
.............................................................. $29.95
OR 1000 rds.........................................$249.50
.22 Long Rifle High Velocity: AM154
Lead H.P., (ARMSCOR) 36 gr. 500 rds (brick)
.............................................................. $49.00
.50 CAL. BALL AMMUNITION
Big blasting action! .50 cal.
Ball ammo that has been
loaded & reassembled by
one of the most respected
reloaders in the business!
We love their ammo for
reliability and cost. We
sell this by the .50 cal.
Ammo can with 150 rds. In
Stock!....$397.00 AM158
NATIONAL MATCH
REAR SIGHT BASES
FOR M1 GARAND &
M14 (M1A) New condi-
M1 GARAND OP. RODS
Original USGI op rods made in the U.S.A. for use
on the Italian Garand. We have had a precision
made Stainless Steel 174 P.H. tip made to replace
the shorter Italian tip. These rods are proper length
for the M1 Garand Rifle and are freshly parkerized
and function fit for guaranteed performance. The
original M1 Garand op rods are getting EXTREMELY
DIFFICULT TO FIND, so please consider this now in
order to hedge against the scarcity of this item in the
very near future........................$140.00 GRD052
SPARE PIN & SPRING KIT FOR M1 GARAND
Clip latch spring
Hammer pin
Extractor spring
Trigger pin
& plunger
Lower band pin
Hammer spring
Op rod catch
Op rod spring
pin
Clip latch pin
Value over $25 - $12.95 GRD219
.22 cal Magnum 40gr JHP: AM155
500 rds (brick)......................................$150.00
.223 FMJ, 55 gr
(ARMSCOR) AM157
100 rds................................................... $34.95
OR 1000 rds.........................................$335.00
223 FMJ, 62 gr:
(ARMSCOR) AM159
100 rds................................................... $34.95
OR 1000 rds.........................................$335.00
.308 NATO
(7.62 x 51)
NEW!
ITEM
Great deal on 7.62x51 (.308 ball
ammunition) New Tula mfg—loose,
steel case, berdan, non-corrosive,
FMJ AM160
100 rds........................ $41.95,
250 rds........................ $97.50,
500 rds...................... $184.95
‘PROJECT’ REAR SIGHT FOR PISTOLS
Similar to 1911 standard rear sights,
this dovetailed rear sight has a width of
1.608", stands .328" high with a 1.20
peep notch that descends .074" into the
body. Width of the dovetail is .341" $3.95 ea, or
10 for $30.00, or 50 for $125.00 C45359
FRONT TACTICAL COMBAT
SIGHT FOR 1911 FOR
DOVETAIL SLIDE
170" height .135 blade width.
For standard 1/4" dovetail red
highlight on back. SARCO
PRICE $4.95, 3 for $9.95 C45140
(Comparable price $19.95)
1911 PISTOL
PARTS &
ACCESSORIES
SUPER SPECIAL
All 3 kits of springs,
pins & screws above
for the 1911 Colt. Sale
value is $18.65. Super
Sarco Value $14.95
for all 3 sets C45259
Whoaaaa…. Cholly’s Done it Again!!!
1911 Series 80 single stack, single action, full size pistol frames available in
either ordnance grade steel or lightweight aluminum! These are finished frames
except for several features that are unfinished to comply with BATF directives
classifying these as Non-Firearms in their present condition. Slide rails, hammer & sear pin holes, mainspring housing retaining pin, and ejector leg holes
remain to be applied. Grip screw holes are drilled and tapped. The frames can
be easily modified to Series 70 with the use of a commonly available adapter
shim. The Steel frame accepts the ‘Clark©’ type 1911 barrel while the Aluminum
frame accepts standard 1911 barrels. A BATF letter of ‘non-firearm’ status,
accompanies each order. These are the best quality 80% frames on the market,
manufactured by a major 1911 manufacturer! Act now before this small lot is
gone! Fits 4.25" slide or smaller.
ALUMINUM 80% FRAME......................................................................................................................................................... $125.00 C45328
STEEL 80% FRAME................................................................................................................................................................. $125.00 C45329
ALSO THESE 80% FRAMES JUST IN !!!!!
#500649 Extra Small Para Frame for 3" slide. Series 80, aluminum, Double stack, Single action............................................. $125.00 C45331
#500675 Para LDA Officers length grip frame in steel with checkered front grip strap. Accepts 4.25" or smaller slide. Single stack and Double
action............................................................................................................................................................... $99.95 3 for $249.95 C45332
#500678 ‘Agent’ extra small steel frame with checkered front strap. Single stack, Double action, and fits 3" slide
........................................................................................................................................................................$99.95 3 for $249.95 C45333
1911 PATTERN SLIDE BONANZA!
1911 PATTERN SLIDES FROM PARA ORDNANCE (SEE COMPLETE DETAILS ON LINE AT E-SARCOINC.COM
Sarco’s got em! Over 125 varieties! These include Standard models, Discontinued models, Overruns
and Custom Variations. Perfect time to upgrade your Para pistol or build up that 1911 frame! These
slides will also allow you to change pistol length, or caliber, or even upgrade your sights! Sarco’s
BIG VOLUME purchase, means BIG SAVINGS for you! These slides are premium material ... not
rejects or returns; material is the remaining inventory from the Corporate change over from Para
Ordnance to Para USA.
GUIDANCE FOR YOUR PARA SLIDE PURCHASE
All our Para slides are cut for the series 80 type firing pin interlock. Complete slides are built
with series 80 parts and a ramped barrel that will fit in 1911 frames that are modified for ramped
match barrels. You can build these up to work in standard U.S. G.I. 1911 type (series 70) pistols
if you wish, However doing so disables the safety features of the series 80.
Striped single action slides will work on any standard series 70 or 80, 1911 frame (series 70 is the
standard 1911) when built with the appropriate parts.
The Para LDA is a double action slide that will work only on Para LDA frames. You can however
cut the disconnector scallop in and use the slide on any standard series 70 or 80 1911 frame.
The 6" and 5" slide use standard 1911 recoil spring plugs and barrel bushing. The 4.25" slides
use Commander type recoil parts. The 3" and 3.5" slides use a unique recoil mechanism that is
available commercially.
There are 2 variations of extractors used on these Para slides. The first is the standard type which
uses any standard .45 extractor. The second is a PXT type. On this style the forward part of the extractor support rib is slightly larger in diameter. We have read that people have used G.I. extractors
as they are the same diameter in the back. PXT extractors or adapter bushings are available from
other sources. We will also soon have these available.
COMMEMORATIVE PARA SLIDES
5 inch
$119.95 PARA095
4-1/4
inch
3-1/2
inch
$139.95 PARA041
$119.95 PARA030
3 inch
$74.95 PARA001
BACKUP PISTOL OR EASY CONCEALED
CARRY?
Want a 3", 3.5" or 4" Hi-Cap
‘Snubby’? This may be the only 3”
slide on the market!!! We offer a
completely finished
new slide and one
of our wide body
frame castings
in steel or aluminum
for as little as $140.!
‘Way Less’ than the regular
price on the slide alone!
CHECK OUR WEBSITE FOR SPECIAL PARA SLIDES USED TO COMMEMORATE UNITS OR
MILITARY ACTION. LIMITED QUANTITY OF THESE EXCITING SLIDES IN STOCK!
PRICING DISCOUNTS - buy 10 slides (any assortment), take 5% off, or 25 slides (any assortment),
10% off, or 50 slides (any assortment), 15% off. WANT MORE ? Call or email Dave at mgdave@sarcoinc.com or Cholly at csteen@sarcoinc.com
(610) 250-3960 SPECIAL COMBO DEAL!
Pick anyone of our PARA Slides and pair it with one of our Frame castings .... TAKE OFF $10.00!
Just got a new shipment of 500 slides and barrels in! We’ve been out for a few
months! The last 1000 went quickly so act fast before they run out again!
Oth
A NICE ASSORTMENT these 8e0rs%mray call
eceive
rs
OF FACTORY CASTINGS
C45284 - P12/P13 type, wide body 1911 type double action frame casting.
No parts interchange with 1911
C45286 - 1911 type, Single stack double action frame casting. No parts
interchange with 1911
C45288 -P12/P13 type double stack single action. Uses most 1911 type parts (see
other ad) Alloy light weight frame.
C45289 - P14 type double stack double action steel frame. No parts interchange
with 1911.
C45294 -P14 type, wide body 1911 type steel double action frame casting. These
also have the enhancement of a lower accessory rail in front of the trigger guard. No parts interchange with 1911.
C45296 -P13 type double stack 1911 .45 frame casting. Uses most 1911 type
parts. Alloy light weight frame. No parts interchange with 1911.
Special price for all above frame castings..................................................$29.95,
Mix or match 4 for.................................................................................. $100.00
Big Buyers call MG Dave or Cholly. We also have other wide body configurations
available. No returns on frame castings.
C45284
C45286
C45288
C45289
C45294
C45296
SERIOUS ABOUT COMBAT SHOOTING? ROTO 4M COMPENSATED BARREL
TRIJICON 1911 REAR SIGHT
2011 production of genuine Trijicon rear sights
designed for Para Ordnance style slides. Bottom dove tail width is .360". Use for a custom build, and
it will work with a variety of .121" wide & .160" high
front Trijicon sights...............................$44.95 ea, or
3 for.............................................$119.95 PARA137
NEW G.I. CLONE ROCK ISLAND
ARMORY .45 1911 &
1911A1 BARRELS
The rifling is absolutely beautiful and
the bore surface is very smooth. Made
from ordnance steel........... $49.95,
3 for.....................$143.50 C45202
.45 SLIDE CASTINGS
Colt 1911/1911A1 .45
ACP Slide Castings
We have 3 size castings.
These are in the white and require
machining to finish.
— 3" barrel sub compact C45293
— 3.5" barrel sub compact C45292
— 4" barrel compact C45291
— 5" barrel full size C45290
Your choice and mix or match the length
$14.95, 10 for $120.00, 50 for $500.00
DOD contractors have been buying up our Roto 4M barrels because they work! MODEL 1911
COMPENSATED BARRELS in 2 calibers will reduce recoil and speed your target acquisition
especially during multiple shots. Takes a minute to install our barrel that comes with Barrel
Bushing and permanently attached and ported Compensator. Also there is less weight on the
muzzle end than with conventional screw on muzzle compensators. Most
people comment on the change of performance, but also that it looks great
too! Sold elsewhere for $175-$200, Sarco’s price is $99.95 Specify caliber
when ordering: New, made in USA. .38 caliber C45024, .400 corbon C45194
E2
THREADED 1911 BARRELS
5-1/2 Inch
Brand new black oxide finished barrels in 3 calibers.
Thread is standard .578x28 TPI.
9mm Model 1911 5-1/2” barrel
..............................$60.00 C45360
.38 Super Model 1911 5-1/2” barrel
..............................$60.00 C45361
.400 Corbon Model 1911 5-1/2” barrel...........................$60.00 C45362
.45 ACP model 1911, 5.5” barrel
.............................. $60.00 C45321
THREADED PROTECTION CAP
FOR THREADED BARRELS
Side Note:
Threaded protection caps for threaded barrels are used to protect barrel
threads when not using a
suppressor or muzzle break.
Barrels with .578x28 threads per
inch........................$13.00 C45363
STILL LOWER PRICES ON ALL .45 AUTO KITS
.45 AUTO “BUILDERS KITS”
Put together your own .45 “Government” pistol with our Builder Kits. Several different
kits available to best fit your needs. Our parts are standard M1911A1/Pre-’70 Government type.
Price List: #1.Builders Kit - All parts in the gun less frame and slide
$149.95 or 3 for $429.95 C45095
#2.Builders Kit – All parts in the gun less frame,
slide,and barrel.$119.95 C45096
#3.Kit - All parts in the gun less frame. Kit
includes one of our new current manufacture G.I.
type slide (unmarked) C45097 $229.95
(Regular value $300)
C45218 - Builders Kit with Commercial Slide $254.95
Compare our prices and see how much you’ll save compared to
the competition!
Note: All gun parts may require some fitting and technical
knowledge for assembly. If you are not knowledgeable seek
professional assistance.
BEST QUALITY COMMERCIAL .45 SLIDES
o Special wide angled front and rear cocking serrations – for
easy grasping
o Nice subdued blue finish with sand blasted inner serrations o Lowered & beveled ejection port
o Unmarked slide o With desirable snag-free rear sight
o Free sight set ($20 value) All this for only..................................................$139.95 C45172
Note: Due to variations we have seen in frames & parts, slight fitting
of ejectors & extractors may be necessary
OUR NEW G.I STYLE 1911 GOVT. MODEL SLIDE
Current production compete with both G.I. sights installed. ($15 value) Made with improved
beveled ejecting port.................................................................................... $124.95 C45160
PARA LDA SLIDES
Brand new precision engineered PARA light double
action slides with Trijicon
front and rear sights
installed are now available at Sarco. We offer
one for the 3 inch 9mm ‘PARA LDS CARRY 9’,
and one for the 3.5” 9mm ‘PARA LDS OFFICER
9’ pistols. Beautifully finished in a dark gray
Physical Vapor Deposition (PVD) finish. Wide
rear serrations on the slide ensure an easy grip
and the pronounced Trijicon sights ensure the
fastest eye ‘line up’ to target. The value of this
package is astounding as the market price on
the sights is almost the same as the cost of the
stripped slide! In this package, it’s like you are
getting the slide for free!
1. 9mm Para LDA Officer 9 Slide w/sights
........................................ $159.95 PARA154
2. 9mm Para LDA Carry 9 Slide w/sights
........................................ $159.95 PARA159
*Specify the 3 inch or the 3.5 inch slide when
ordering.
www.e-sarcoinc.com
610.250.3960
COMPLETE 1911 .45 SLIDE KIT
(All Parts For Slide)
A complete set of the top half of a .45 Government model. Kit
includes one of our new current manufacture slides (unmarked),
barrel, firing pin, recoil spring parts, sights, extractor, link & pin, band bushng. Over $198.00
worth of parts for only..................................................................................$174.50 C45092
Complete upper commercial slide kit for.......................................................$184.95 C45200
Our commercial slide set also available with one of our compensated barrel assy. for
........................................................................................................................... $229.95 C45093
OUTSTANDING ASSORTMENT OF QUALITY 1911 BARRELS
ROTO 4M HAMMER FORGED .45 ACP, 9MM & .38 SUPER
Built to precise tolerance by a special hammer forging process, these barrels are the best you can buy!
The hammer forging forms the barrel around a precision mandrel and holds the tolerance to .0001".
This is much better than the typical broached barrels found elsewhere
Note: 5" & 6" .45 barrels are L.H. twist – all others are R.H. twisted
COMPARE THE ROTO-4M BARREL FOR ROUNDNESS AGAINST A
STANDARD BROACHED BARREL FROM A WELL KNOWN MANUFACTURER. ALL ROTO-4M BARRELS ARE MADE IN THE USA.
Brand new extra length barrels for all Colt/1911/Government Model
type automatic pistols. These barrels are made by the Special Roto-4M
Hammer forge process which produces the most precise and consistent
barrels for the best accuracy. Minor hand fitting may be necessary for
some guns. Barrels do not include link & pin. Link & pin available
w/barrel purchase for additional $5.00 C45281 Available in:
.400 Corbon Barrels
41/4" Commander
$53.70 C45105
6"
$58.70 C45104
STD 5"
$53.70 C45025
.45 ACP
41/4" Comm.$51.70 C45010
5"......... $51.70 C45011
6"......... $59.70 C45013
7"......... $61.70 C45014
16"....... $79.50 C45016
.38 SUPER
5".....$51.70
6".....$58.70
7".....$62.70
41/4" Comm
....$51.70
.40 S&W 1911 5" barrel C45277 $53.70
9MM LUGER
C45017
C45009
C45018
C45164
41/4" Comm
$53.70 C45163 5"
$53.70 C45019 6"
$58.70 C45020 7"
$62.70 C45021
Note: 9mm & .38’s will not fit the .45 slide
9MM SINGLE ACTION 3 INCH SLIDE W/ TRIJICON SIGHT
Para 1911 single action slide with PVD finish , front sight slot cut,
and a Trijicon Wedge rear sight installed. Originally designed for the
LDA Carry 9mm pistol, but modified to work with all 1911 single
action frames. Accepts standard 1911 extractors.
........................................................................$139.95 PARA177
9MM SINGLE ACTION 3 INCH SLIDE
Para 1911 Single Action slide with PVD finish, front & rear sight
cutouts, wide rear serrations and accepts standard 1911 extractors.
Originally made for the Para LDA Carry 9mm, but modified to work
with all 1911 single action frames.
............................................................................................................................... $119.95 PARA176
STAINLESS STEEL 1911 PARTS C45038 Recoil spring guide (matt finish) Commander..................$3.50
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
.45 ACP PROJECT BARREL
Nice 6 inch .965 OD chambered barrel
blank for your next project
$19.95 MISC276
8 ROUND .45 MAGAZINE
New, blued steel
magazine for all .45
ACP Government
Model/M1911 type
pistols. Base plate also acts as finger rest
to improve your grip on the gun.
................................ $16.95 ea. RPM122
WIDE SPUR HAMMER
Desirable M1911 type
checkered wide spur hammers for the Colt .45 auto
pistol. These are new, ready
to install and upgrade your
pistol. Heavily checkered
(not grooved) wide spur
provides a sure grip when
thumb cocking or decocking. $12.50
C45054 (Comparable price $23.00) Note:
These are due in a month. Send order
and get on the list
For Colt mfg barrels, see our website.
.45 ACCURACY KIT
Upgrade your .45 Auto pistol and improve your
score with our Accuracy Kit. medium steel. Adj.
Trigger for smooth crisp trigger pull, a No. 13
match barrel link to tighten up the barrel in the
slide at the moment of firing, a high speed recoil
spring and a high speed firing pin spring.
SPECIAL KIT PRICE $13.95 C45089
.45 AUTO FRAME KIT
All parts to build a 1911A1 frame
(except the frame itself). Includes trigger, hammer,
grips, sear, mainspring, safety, etc., etc., (no slide
stop). $89.95 ea. C45099
M1911 “DIAMOND” GRIPS
These brand new
walnut grips are made
in the original World War I
style with the “Diamond” pattern
checkering. Give your
45 Auto the classic look
and feel of the original
Colt 1911 design.
$13.95/pr. 3/$36.50 GRP162
FOUND IN WAREHOUSE!!
ORIGINAL WWII G.I. COLT .45
AUTO COMPOSITION GRIPS
These were long ago taken off G.I.
1911A1’s – when the guns were
demilled. V.G. excellent condition.
$14.95 GRP131
3 HOLE LIGHTENED COLT 1911 LONG
TRIGGERS SPECIAL RUN
trigger pad is serrated
for good contact
....................$12.95,
3 for................................$36.50 C45173
1911 .45 AUTO PISTOL PARTS
C45095 Auto Builders Kit (Less
Frame & Slide)........................ $149.95
C45097 Auto Builders Kit (Less
Frame).................................... $229.95
C45096 A
uto Builders Kit (Less Frame, Slide &
Barrel)................................... $119.95
C45218 Builders Kit w/ Commercial
Slide....................................... $225.00
C45099 Frame Kit..................................$89.95
C45089 Accuracy Kit..............................$13.95
C45091 Auto Repair Parts Kit.................$22.50
C45017 Barrel, 5", Roto, .38...................$49.70
C45019 Barrel, 5", Roto, 9mm................$51.70
C45009 Barrel, 6", Roto, .38...................$56.70
C45020 Barrel, 6", Roto, 9mm................$56.70
C45021 Barrel, 7", Roto, 9mm................$60.70
C45018 Barrel, 7", Roto, .38...................$60.70
C45016 Barrel, 16", Roto........................$76.50
C45011 Barrel, 5", Roto, .45...................$48.70
C45025 Barrel, 5", Roto, 400 Cor-Bon....$51.70
C45013 Barrel, 6", Roto, .45...................$56.70
C45014 Barrel, 7", Roto, .45...................$58.70
C45010 Barrel, Commander, Roto, .45....$48.70
C45015 Barrel, Roto .45 w/ Compensator
.................................................$99.95
C45024 Barrel, Roto, .38, w/ Compensator
.................................................$99.95
C45040 Barrel Bushing............................ $6.50
C45087 Barrel Bushing Wear Gauge,
................................................Sold Out
C45085 Barrel Bushing Wrench................ $2.95
C45026 Barrel Link Pin............................ $1.00
C45028 Barrel Link, #13, NM......................$8.95
C45027 Barrel Link, Std........................... $4.95
C45098 .45 Cal. Bore Brush..................... $1.25
C45251 Colt 1911 Cleaning Rod M4......... $6.95
C45045 Disconnector............................... $7.50
C45299 Ambidextrous slide stop matte finish........................................................................... $12.95
C45150 Reverse recoil spring plug...............................................................................................$6.95
C45312 Hammer pin...................................................................................................................$2.00
C45313 Mag catch lock...............................................................................................................$3.00
C45314 Mainspring Housing pin.................................................................................................$2.00
NICKEL .45 PARTS 1911
C45315 Slide stop.................................................................................................................... $15.00
C45316 Barrel bushing...............................................................................................................$8.50
4 PRONG SEAR SPRINGS
FOR THE 1911
NEW, ARMSCOR…
Once again available. The
normal spring acts on the sear, disconnector
& grip safety. This spring acts on the trigger as well to tighten up any slop. A great
innovation. Spring exerts constant forward
pressure on the trigger for nice crisp trigger
& prevents hammer and sear notch damage
and hammer follow on.................... $5.95,
3 for................................. $14.95 C45168
.45 FLAT MAINSPRING HOUSINGS
Brand new, flat (M1911 Style) steel
housings, grooves nicely for a sure
grip. Matte gray/black finish. These
are nice! $13.50 ea., 3 for $37.50 C45082
WIDE BEAUTIFUL GRIP SAFETY FOR 1911
.45 AUTO Stop the pinch in the
web of your hand (I used to get
bloody) $16.50, 3 for $49.95
C45079 (Note: These are for
short rear tang frame. You can
fit them to Std. frame)
.45 Recoil Springs for the 1911 pistol
rated at 16lbs.................$4.95 C45326
Mag Catch for wide body 1911 frames.
Comes with release and spring
................................... $16.95 C45327
SPECIAL .45 COLT AUTO
REPAIR PARTS KIT
Containing the following parts: 4 grip
screws, 2 grip screw escutcheons, 2
mainsprings, plunger tube spring, sear
spring, 2 ejector pins, 2 mag. catch
springs, 1 firing pin stop, 2 firing pin
springs, 4 hammer strut pins, 2 firing
pins, 2 mainspring housing pins, 1 recoil
spring. Regular $37.00
SPECIAL........................$22.50 C45091
.45 1911 ORIG. SEAR SPRINGS
Another find in the warehouse — while the few
last. $5.95ea., 3 for $14.95 C45319
OUR NEW COLLECTION OF 1911 TRIGGER STEEL & LIGHT WEIGHT
C45064
C45175
C45149
C45174
C45066
C45137
C45065
Long aluminum adjustable .................................................. $11.95,
Long aluminum non-adjustable............................................ $11.95,
Long steel adjustable ........................................................... $11.95,
Long steel non-adjustable .................................................... $11.95,
Medium aluminum adjustable ............................................. $11.95,
Medium aluminum non-adjustable ...................................... $11.95,
Medium steel adjustable.....................$11.95, 3/$32.50
3/$32.50
3/$32.50
3/$32.50
3/$32.50
3/$32.50
3/$32.50
Note: All triggers have serrated face for solid finger contact. The medium length is a perfect compromise as the short and long triggers don’t
fit all hands. Shoe length is 5⁄16". Comparable price $18.00 or more.
PISTOL & RIFLE STRIPPER CLIPS
EA.
3 for
10 for
STC003 Carcano – (light rust but works fine - Last of ‘em!)
$4.95
STC005 AR15/M16 Guide $1.50$3.50 $9.95
STC008 Steyr ‘95 Rifle
$3.95 $11.00$30.00
STC009 6.5 Dutch Rifle
$4.00 $11.00$39.95
STC010 Enfield .303
$3.00
STC011 Steyr Hahn 9mm Auto
$3.00$8.00 $20.00
STC014 Mosin Nagant $2.50 $5.00
$16.95
STC016M14
7 for $9.95
STC020 Swedish Mauser N/A $4.00$10.00
STC025 1903 Springfield, Brass, Original
$4.00 $10.00$30.00
STC029 1891 & 1909 Argentine
$1.50 $3.25
$9.00
STC031 Mannlicher 7.65 pistol $6.50 $18.00 $49.95
STC013 ‘98 Mauser steel stripper clip
$2.00 N/AN/A
STC018 ’93 Mauser brass stripper clips
$3.00$8.00 $20.00
STC028 Orig. ’98 Mauser brass stripper clips, never seen before. Few only
$3.00 ea.
STC033Replacement Mauser C-96 Broomhandle 8rd
original military N/AN/A $10.00
STC006 Rare 1896 Mannlicher stripper clips
$24.95 $59.95
STC024 SKS stripper clip $1.00$2.95 $7.95
SARCO’S MODEL 1911 .45
AUTO MAGAZINES
Extensively tested and perform as
well if not better than Government
mags ! Purchasing in high volume
allows us to offer the best price
around. For use in all Govt.& Commercial 1911 , 1911A1, Govt. series
70 & 80, Commander, Essex, Rock
Island etc. pistols....... $8.95 each
or 10 for............... $74.95 C45298
SARCO SPECIAL
Two of our famous 1911 .45
mags plus a web mag pouch
(below) for only........$20.95,
2 sets for.....$39.95 C45310
STC032 Fine workable stripper clips for Jap type 99 & 38
5/$9.95,
10/$14.95
Note: all above stripper clips are original except 91/30
1911 .45 AUTO MAGS
Only $8.95, 10 for $74.95 C45298.
This is is half the price of
most reasonable .45 mags! See our website for more details!
C45068 Ejector......................................... $4.75
C45067 Ejector Pin................................... $1.00
C45030 Extractor...................................$12.00
C45044 Firing Pin..................................... $4.95
C45301 Just in the door! Series 80,
9mm & .38 Super firing
pins– Now available for 1911
pistols........................................ $5.95,
3 for............................................ 14.95
C45029 Firing Pin Spring......................... $1.75
C45043 Firing Pin Stop............................. $4.25
C45032 Front Sight A1............................. $5.00
C45079
Grip Safety, Wide Extended Black (Note:
These are for short rear tang frame. You
can fit them to Std. frame)
.................................................$16.50
C45078 Grip Safety, Long Tang
.................................................$12.00
C45151 Grip screws, Stainless Steel, 4 for
................................................... $5.95
C45073 Grip Screw Bushing..................... $1.00
GRP131 Grip Set, Plastic, GI, exc.
.................................................$14.95
GRP162 Grip Walnut, Diamond Style, new
..................................................... $13.95
C45052 Hammer Pin................................ $1.00
C45056 Hammer Strut............................. $3.50
C45055 Hammer Strut Pin....................... $1.00
C45053 Hammer, Regular Spur................ $9.95
C45054 Hammer, Wide Spur...................$12.50
C45060 Mag Catch................................... $6.95
C45061 Mag Catch Extended.................... $9.95
C45327 Mag Catch Wide Body, Armscor
.................................................$16.95
C45062 Mag Catch Lock........................... $2.00
C45063 Mag Catch Spring........................ $1.00
C45094 Magazine Pouch........................... $7.95
C45047 Main Spring................................. $2.00
C45084 Main Spring Cap.......................... $1.25
DOUBLE MAG POUCHES
FOR COLT 1911 .45
Exact repro with WWII markings. We
had these 2 years ago but got lost in
the warehouse....................... $4.95,
3 for........................ $11.95 C45280
C45083 Main Spring Cap Pin.................... $1.00
C45059 Main Spring Housing Retainer Pin
................................................... $1.40
C45082
Main Spring Housing, Flat (Checkered)
.................................................$13.50
C45145
Main Spring Housing Flat &
Grooved, Composite..................... $8.75
C45171
Main Spring Housing, Steel w/loop
.................................................$16.50
C45050 Main Spring Retainer................... $1.00
C45049
Main Spring, for Alum.Frame
................................................... $1.25
C45001 Rear Sight................................... $4.75
C45326 Recoil Spring, Armscor................ $4.95
C45036 Recoil Spring, Standard............... $2.75
C45037 Recoil Spring Guide..................... $4.65
C45038 Recoil Spring Guide, Commander
................................................... $3.50
C45034 Recoil Spring Plug........................ $4.00
C45232 Recoil Spring Plug G.I. New
.................................................$14.95
C45126 Recoil Spring, High Speed............ $3.95
C45138 Reverse Recoil Spring Plug........... $7.50
C45074 Safety Plunger............................. $1.45
C45075 Safety Plunger Spring.................. $1.75
C45086 Screw Driver & Take Down Tool
................................................... $4.95
C45058 Sear............................................. $8.50
C45057 Sear Pin....................................... $1.00
C45051 Sear Spring.................................. $3.95
C45111 Sight Set, Battle Combat............$14.95
C45092 Slide Kit.................................. $168.95
C45076 Slide Stop Plunger....................... $1.45
C45003 Slide Stop, Standard..................$12.00
C45002 Spring Kit.................................... $7.75
C45046 Thumb Safety............................$10.00
C45173 Trigger Alum 3 Hole...................$12.95
C45064 Trigger Long Alum Adj...............$11.95
C45175 Trigger Long Alum Non-Adj........$11.95
MORE 1911 PARTS & ACCESSORIES
.45 1911 SKELETON HAMMERS
Available again and at a special price
- Others get $50 to $75 for these.
Could require very minor fitting to
some grip safeties due to the variations in manufacture of
NEW
grip safeties.Our Price $14.95,
ITEM!
3 for $36.95 C45256
MODEL 1911 SCREWDRIVER
& TAKE DOWN TOOL
Original WW2 era tool for
the Model 1911 pistol.
Handy and very compact in
size. Issued from WW1 on,
these tools were originally
part of the 1912 Squad Cleaning Kit. VG/
Exc. condition
......................................... $4.95 C45086
We have a few with manufacture markings
like ‘Stanley’ and ‘Metlglas’. Specify mfg
when ordering $9.95 ea. C45320
COLT 1911 STEEL MAINSPRING
HOUSING w/LANYARD LOOP
Housing is grooved for a sure
grip 1911A style - nicely blued
$16.50, 3 for $47.50 C45171
ORIGINAL NEW 6in SLIDE
1911 RECOIL SPRINGS
Can also cut to length for 5" 9mm guns
9mm.$3.95ea or 10/$24.95 Para150
.45 ACP $3.95ea or 10/$24.95
Para151
BACK AGAIN AFTER BEING OUT
OF STOCK. 1911 COLT HIGH
SPEED RECOIL SPRINGS
Great story: Our spring maker is a gun
buff. He tried one of these springs in
his 1911 and had to call us to tell us
how great it is. Our first overwhelmed
customer on this product.
..................................................$3.95,
3 for...........................................$8.45,
10 for........................... $22.95 C45126
HIGH QUALITY 10 ROUND
.45 1911 MAG
.45 single stack magazines for 1911
Colt Special...................$19.95 ea,
3 for........................$49.95 RPM127
ORIGINAL BROLIN 1911 MAGS
C45238 7RD for detachable bottom
weight with orange composite trough
follower..................................$24.95
RPM158 7RD Brolin marked mag
...................................$19.95
RPM283 8RD Brolin marked with composite floorplate.....................$24.95
F2
BRONZE .45 CAL. CLEANING BRUSHES
5 for $4.85 C45098
1911 combat sight set millet
rear sight plus (tactical)
wide blade front with 1/4"
dovetail red highlight Retail
value $62.00. Sarco Special
$19.95/set, 3 sets for
$42.50 C45177
MILLET MARK I
Combat High Profile Rear White Outline
Sights Fits Colt 1911 dovetail. White outline
gives clear sight picture. Retail value $22.75.
C45131 Sarco Special $9.95, 3 for $24.95
Full pin set for Colt .45
NEW!
Auto. All seven pins for the
ITEM
M1911. New $4.85/ set,
10 sets for $38.50,
100 sets for $285.00 C45195
Just in the door!
NEW
.40 S&W, 9MM & .38 SUPER
ITEM!
FIRING PINS – Now available
for 1911 pistols......................... $5.95,
3 for..............................14.95 C45301
Will fit both 70 Series and Series 80 pistols
.45 BARREL BUSHING WRENCH
$2.95 Free Bonus –
Other end is an M16
shorty buttstock installation wrench TOOL031
.45 AUTO SPRING KIT
One each of all 6 springs in a Colt .45.
A $13.25 value for only. Includes sear spring
$7.75 ea. C45002, 10 sets for $65.00, 100
sets for $450.00
SUPER SPECIAL
All 3 kits of springs, pins & screws above for the
1911 Colt. Sale value is $18.65. Super Sarco
Value $14.95 for all 3 sets C45259
FRONT TACTICAL COMBAT SIGHT FOR
1911 FOR DOVETAIL SLIDE
170" height .135 blade width. For standard
1/4" dovetail red highlight on back. SARCO
PRICE $4.95,
3 for $9.95 C45140 (Comparable price $19.95)
NEW VARIATIONS OF OUR
1911 .45 ACP MAGS - JUST
IN THE DOOR
Stainless steel magazines
.......................................$10.95,
3 for.................... $29.95 RPM121
G.I. marked 1911 magazine marked
.45 ACP #1005-00-8694 MFR8R320.
$10.95,
3 for$29.95 RPM155
WWI PATTERN .45 1911 MAGS
WITH LANYARD LOOP
............$12.95 ea.
OR buy
3 mags for..$36.95
and get a free pistol
lanyard for the mags!
C45295
U.S. PREMIUM GRADE HOLSTERS
Sarco offers a long line of standard grade
quality holsters which can be found in this ad
on the ‘Y’ page. We also offer some exceptionally tanned U.S. Military historic holsters for
presentation grade pistols. The finish and crisp
embossing are superior to our standard line
and are still affordably priced. Beautiful quality
holsters for your top grade pistols!
A) 1916 Hip Holster (Right Hand & Left
Hand Available)
Model 1911 hip holster in original WW2 color of
russet brown w/ leg strap. Right Hand draw:........................................$35.00 HOL106
Left Hand draw:....................................................................................$35.00 HOL071
B) 1917 S&W .45 REVOLVER HOLSTER (Left & Right)
Butt back model in russet for the right hip with leg strap......................$35.00 HOL101
Butt forward model for right hip with left hand draw. Can be used on left hip for left
hand draw too......................................................................................$35.00 HOL102
C) 1912 Cavalry Holster ( Right & Left Hand Available)
Long drop cavalry holster for the Model 1911 pistol in the WW2 russet brown color with
leg strap.
Right Hand draw..................................................................................$35.00 HOL099
Left Hand draw.....................................................................................$35.00 HOL070
D) Victory Model S&W Revolver Holster (Right Hand)
WW2 russet brown color.......................................................................$35.00 HOL107
E) Colt 1892 & S&W 1902 .38 Revolver Holster
Original russet color with brass ring at bottom. Made for the standard 5" barrel.
Commonly called the M1905 holster.....................................................$35.00 HOL103
C45149
C45174
C45066
C45137
Trigger Long Steel Adj................$11.95
Trigger Long Steel Non-Adj
.................................................$11.95
Trigger Med Alum Adj................$11.95
Trigger Med Alum Non-Adj
.................................................$11.95
C45065
C45148
C45077
Trigger Med Steel Adj
.................................................$11.95
Trigger Med Steel Non-Adj
.................................................$11.95
Tube Slide Stop & Safety Plunger
................................................... $4.95
U.S. MILITARY FLECHETTES PACK
Historically used through the ages for defense, these 1 inch
long Flechette Darts were thoughtfully saved from Beehive
munitions. Since we have a limited
supply, we are offering you a 2 oz.
pack which holds about 100 flechettes
$7.00/2oz pack (100+pcs)
MISC288
Save BIG when you buy a POUND!!
1 LB/$24.95 MISC307
GUNSTOCK FURNISHINGS
M1 GARAND WALNUT BAR STOOL STOCK PROJECT
M1 Garand Walnut Stocks for that special project! Outstanding value in
original ‘new’ old stock walnut Garand stocks that have had the front ends cut
and flattened by about an inch or so for a furniture contract that never got
off the ground. You benefit because we want to move them and Cholly’s got a
friendly price in hand. These stocks are really beautiful and still have military
cartouche markings on them and a smooth walnut finish. Great for making
project furniture. These pictured items are just some of the great ideas you
can try! Stocks are approximately 28
inches long.
1 Stock $10.00
4 Stocks $29.95
8 Stocks $49.95
11 Stocks $69.95
100 Stocks $399.00 GRD339 *For
even larger quantities, we’ve got you
covered…. Call Mark, Dave or Cholly
for Big quantity pricing!
1903 SPRINGFIELD
BAR STOOL STOCKS
Here is
a neat
Sprin
project for
gfi
Bar S eld
the home
to
Stock ol
handyman.
s
We have a
big pile of
unissued condition G.I. 1903
Springfield walnut stocks
that were modified years
ago to make into bar stools!
Ouch! What a waste of good stocks! The stocks were shortened and notched to hold a seat and foot rest
ring (not included). The fellow who was doing this went out of business and we bought all of his stock
legs. To illustrate the concept we have made up a simple bar stool so you can see the possibilities. It is
a shame he cut the stocks, as they were new, unissued G.I. 1903 stocks, but his loss can be your gain.
Add a swivel seat of your choice to the top. All stocks have been precut and drilled. You have to make 2
circular or octagonal spacers........................................................................... $39.95/set of 4 SPF124
UNBELIEVABLE SPECIAL CLOSE OUT PRICE!! SUIT OF
MEDIEVAL ARMOR (FULL SIZE!)
Full sized set made from 20 gauge steel , complete with stand!.
Stands over 6 feet tall and when on it’s base, 80" tall! Comes complete with helmet, skirt, and battle sword. A quality set of armor
which will be eye candy to anyone who comes in your store!
We purchased in bulk
so compare at current
WW2 BRITISH COMMO WEALTH
market retail of $2400 HELMET W/ AUSTRALIAN
$5,000!
EMBLEM
Well-made steel British
style helmet with 1st
pattern spring loaded
canvas chinstrap. The
famed Australian 6th
Division emblem is
adorned on the left side
....................$32.95 HLM027
.50 CAL INERT
AMMUNITION FOR
DISPLAY
Finally back
in stock
and cleaner
& brighter
than ever,
this inert
ammo looks
great as the
cases and
projectiles
are polished brass & copper. No holes
drilled in the cases and the expended
primers are still intact. Perfect for displays, military aircraft, or vehicles!
Each round...................$2.50 AM019
Belt of 10 rds., linked.$22.00 AM161
Belt of 50 rds., linked.$95.00 AM162
(Be sure to comply with your State
or Local regulations in the few States
where they apply, when buying linked
inert ammo)
Quantity is very limited
so act quickly.
Some assembly required.
$695.00 each MISC401
HANDSOME PRE WWI MODEL
MILITARY GERMAN HELMET
1889 PRUSSIAN
KURASSIER,
PICKELHAUBE
Helmet made from
steel with leather
liner, brass scalloped
chinstrap, cockades,
steel spike and brass
emblem. Inscription
embossed on brass
emblem translates from
German as, ‘With God
for Kind and Fatherland’. (Mit Gott Fur
Koenig und Vaterland)
..........$84.95 HLM012
BRITISH PATTERN ‘SAM
BROWN’ BELT SET
Ruggedly crafted with strong
leather, saddle stitching, and
solid brass hardware, this
SAM BROWN BELT is as
good as it gets for military
or police duty. Has sword
connecting rings too ! We
have two colors: Black or
Brown. Additionally we
can offer the brown belt
set with a British Webley
holster as used a
century ago.
BLACK “SAM
BROWN” BELT
$44.95 MISC389BLK
BROWN “SAM
BROWN” BELT
$44.95
MISC389-BRN
BROWN “SAM BROWN” SET W/ WEBLEY
HOLSTER $54.95 MISC390
H2
Phones Open: Mon Fri, 8:30am – 5:00pm
Showroom Open:
Monday - Saturday,
10:00am – 5:00pm,
Friday til 8:00pm
MACHINE GUN CLOTH BELTS AND LINKS
Elsa’s made some new deals to
keep your guns rockin with our Browning 1919A4
CLOTH BELTS which work with .30-06, 8mm,
& .308. 100 Rd. length. $14.95 ea.or 5 for
$54.95 A4276
JUST IN! 200 RD BROWNING CLOTH BELT
$18.00 ea or 5/$67.95 A4279
.308 Browning Links – Great for 1919A4s in
.308/7.62 caliber! Original Israeli links which are
reusable over and over again. A4115
1000 pcs. $70
2000 pcs. $134 ($67 per thousand)
3000-9000 pcs ($65 per thousand)
10,000 pcs ($60 per thousand)
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
#4 MK1 Rifle Magazine
.303, 10 rd. capacity and broad arrow marked. We’ve worked on having these made accurately for over 2 years of development & testing. Exactly like the WW2 issue magazine!
Extremely difficult to find on the market and we’ve been very challenged to keep originals
in stock. Now all of our hard work to bring these to you can pay off and at an unbeatable
price! $29.95 each, 3 for $84.95, 10 for $229.95 RM61
NEW!
ITEM
ENFIELD PARTS & ACCESSORIES
RARE STOCK SET
(stock, forend & HG’s) for #4 MKII Enfield (trigger
on the receiver) – New condition. Need to stain to
match. Without cross bolt.... $140.00 LE4074
#4 MKII Stock Set, used w/o cross bolt
............................................................ $109.95
#4 Standard Enfield Stock Set, used........$99.95
ENFIELD RIFLE KHAKI RIFLE
CASE
Made
from
heavy
canvas material, this gun case was used for Enfield #1 MKIII & #1 MKIV rifles. Will fit many other
rifles. Includes khaki sling!......... $16.95 LE3092
Complete set of #1 MKlll stock hardware–
buttplate, swivels, forend collar assembly,
bands, nose cap, rear sight protector, stock bolt
and all related parts. 27 parts $48.50 LE3094
See our website for complete list of parts in kit
#1 MKIII & # 4 ENFIELD
SPECIAL ITEMS
LE3074 Brand new original G.I. Buttstock
#1 MKIII.............................................$19.95
LE3075 #1 MKIII complete Safety Assy............$16.50
LE3078 #1 MKIII Original brass buttplate.......$14.95
LE3076 #1 MKIII Enfield .22 LR cal bolts,
complete super rare........................ $100.00
LE4063 #4 MKI complete Safety Assy..............$16.50
LE4077 Original #4 Enfield brass buttplate VG.$14.95
LE4004 #4 Bolt head size # 1, new orig...........$24.95
3 for...................................................$64.95
LE4005 Bolt head for # 4 Enfield, new standard
............................................................$13.50
LE4062 Original pull thru field cleaning
device, new......................................... $2.95,
3 for..................................................... $6.95
LE5001 # 5 Complete buttstock assy for jungle carbine
–current production Includes buttplate assembly
........................................................... $39.95
MISC196Original Extractors for the .308 (7.62mm
Nato) cal #1 MKIII Enfield – These are
called the model 2A.........................$19.95
LE4096 Original Israeli # 4 Enfield scope rings for
the brass Israeli #32 scope for the Israeli #4
Enfield sniper rifle (few only).. $59.95/set
LE4010 # 4 Enfield striker (firing pin) new original
factory........................................... $17.50
LE4104 #4 Enfield L shaped battle sight.......$8.00
LE4079 #4 Enfield stock & handguards set, used
..................................................... $99.95
LE3049 # 1 MKIII Enfield striker (firing pin) new
original factory.............................. $17.50
LE4014 # 4 Enfield complete bolt............... $90.00
LE3064 # 1 MKIII Enfield complete bolt...... $69.95
RM57 Just a couple - .45-70 magazine for Navy
Arms .45-70 Enfield...................... $85.00
LE4013 #4 Enfield extractor spring...............$7.85
LE3095 Rare long Lee and Lee Medford sliding dust
cover, few only.............................$100.00
LE3059 #1 MKIII Enfield extractor spring.. $10.00
THE NO. 4 ENFIELD TARGET/
MATCH SIGHTS
These sights were made by the famous British gun maker. Parker-Hale, for use on a
high power military target or sniper rifle.
• Long range vernier micrometer sight
• Adjustments up to 1300 meters
•M
icrometer click adjustments for windage
• Windage scale plate for possible adaptation
This has got to be one of the most outstanding Enfield No. 4 micrometer target sights
ever offered.
TO INSTALL THIS SIGHT ON YOUR #4 ENFIELD. TWO SIMPLE
OPERATIONS ARE
NEEDED. Full and
clear instructions are
included for the installation of this sight on
your fine Enfield rifle.
We could have charged
$100 to $125 for this fine sight, but we’ll offer
it now at only
................................................. $49.95 PH007
ORIGINALLY HAD 4,000 PIECES, NOW WE’RE
ALMOST SOLD OUT!!
FULL ENSEMBLE/ENFIELD #32 MK1 SNIPER SCOPE
Outstanding detailed steel reproduction telescope
used on the Lee Enfield sniper rifle. Ruggedly built ,
it has a sliding eyeshade, drum adjustments w/ distinctive and solid clicking allowing for deflection of
16 minutes of angle left or right, as well as elevation
settings at 2 minutes of angle each. Range drum
allows adjustments at 50Yds per click out to 1000
Yds. Complete set comes w/ steel case, adjustment tool, scope mount, lens covers ..... and as
a bonus Sarco includes 2 bases, screws, taps and drill bits so you can install the mount. The
Sniper Scope and all the accessories for.........................................................$595.00 N3207
Original #32 Scopes fetch as high as $7500.00!
COMPONENT PARTS AVAILABLE INDIVIDUALLY TOO!
1. #32 MK1 SCOPE by itself......................................................................... $297.00 SCP034
2. Set of rings & mount w/o bases............................................................... $129.95 SCP001
3. Leather Lens Cover.....................................................................................$21.50 SCP036
4. Front & Rear Base (Pads).............................................................................$39.95 LE4071
5. Drum Adjusting Tool...................................................................................$22.50 SCP037
6. Transit Chest for scope............................................................................ $139.95 SCP035
7. Full Set of Base Screws & Drills & Taps...................................................... $39.95 LE4075
ENFIELD MK4 #1
EARLY SWIVEL
NEW!
ITEM
Early production butt swivel
later replaced by the easier to
produce oval style..............$7.00 LE4111
Enfield parts, parts & more parts!
NOTE: We have most all parts for #1 MKIII, #4
MKI and #5 Enfield– along with many variations &
accessories. Check our website.
BUILDING A #4 MKIT SNIPER RIFLE?
Mounting & tapping the bases is not easy. We got
a turnkey set for you – all one with the proper
British thread.
1. 7 proper screws (we send you 2 extra in case you
loose or mess up any)
2. The two taps you need with the proper thread.
3. The two proper drills you need for the job – .British size.............................................. $39.95 LE4075
Note: these tools are industrial quality and not
returnable. Set of 5 proper screws for the job w/o
the tools....................................... $14.95 LE4076
ENFIELD #4 MKIT SNIPER RIFLE CHEEK
PIECES
Just in the door!
Complete with
proper brass
screws. Use to
build your sniper rifle or also to create a
high comb buttstock...........$24.95 LE4106
BRITISH ENFIELD CANVAS SLING
We are now able to
offer you 2 of the
Wartime canvas
slings used on the
Lee Enfield Rifles
as well as 1 post
war issue sling.
These are new
made and all feature brass hardware and an accurate cotton weave.
Colors available:
TAN
SLNG102
BLACK
SLNG096
RAF BLUE SLNG095
Your choice…
$6.95 each
NEW!
ITEM
BRITISH ENFIELD ACCESSORY KIT
Sling, firing pin tool,
oiler, field cleaning rod (pull
through), and brush. Value
$22, Special $16.95 LE4061
NEW!
ITEM
JUST IN...LEE ENFIELD
RIFLE MAGAZINES
#1 MK3 Enfield Rifle
Magazine
.303, 10 rd. capacity
$40.00 RM011
Enfield 2A1 Rifle Magazine,
.308 Nato, 10 rd.
capacity… $44.50 RM039
COMPLETE SET OF #4
ENFIELD STOCK HARDWARE
Buttplate, bands, swivels, handguard ring,
bolt and all related screws and washers. 17
parts..............................…$39.95 LE4103
See our website for complete list of parts in kit
Enfield questions? Email Lucas for
answers! Lgreb@sarcoinc.com
#4 MKIT ENFIELD SNIPER RIFLE SCOPE
MOUNT BASES
• (Also called the “pads”) • Front and rear pads (set)
LE4071 $39.95 (only have a few of the sets)
#4 MKIT SNIPER COMPLETE PROGRAM
Includes the scope mount, mounting bases
(pads), plus the 7 proper screw & 2 drills &
2 taps. This all you need to build your # 4
MKIT Sniper on a
#4 Enfield rifle..........................$219.95,
3 for...............................$624.00 LE4080
Special – complete scope mount with the
mounting pad set......... $189.95 LE4081
ENFIELD #4 MKIT SNIPER SCOPE
MOUNTS
These fine
scope mounts
are now in
stock again.
Telescope
mounts for the
British Enfield
#4 MK I (T)
Sniper Rifle. We made these because there
are so many #4 MK I (T)’s that were imported
with out scopes. The good news!! These
mounts will take a standard commercial 1”
tube scope to use on your rifle while you are
seeking an original scope for the rifle. Made
to meticulous detail to the original as we have
with all our reproduction scope mounts. Sold
at a very special price considering the rarity
and value of an original mount.
................................ $159.95 each SCP001
(Note - does not include scope or receiver
pads)
ENFIELD STRIPPER CLIPS
We just bought the last small quantity we know of.
They are now dinosaurs. While they last!
................................................ $3.00 ea. STC010
ENFIELD RIFLE ID DISC
NEW!
ITEM
Brass 1 inch diameter disc which
is fitted into the right side of the
Lee Enfield Rifle stock. Frequently
found on British & Commonwealth
forces service rifles, these discs
sometimes had proof marks and or mfg.
names, dates etc. A great way to improve the
appearance of the Enfield Rifle. Engraved
brass disc w/ 4 markings .......$6.95 LE3084
50 Hilton Street,
Easton PA 18042
610.250.3960
Fax: 610.250.3961
www.e-sarcoinc.com
PISTOL
AND
RIFLE
MAGAZINES
RIFLE MAGAZINES
ITEM
NUMBER
DESCRIPTIONPRICE
RM019 AK 7.62x39, 10 Round................$14.95
RM004 Carbine Destroyer......................... $6.95
RM64 CZ-452 Rifle 10rd Original, steel. Fits CZ
452 rifle and holds 10rds of 22LR. Also
good for the Norinco JW-15 rifle.
Excellent Condition....................$70.00
RM46 Egyptian Hakim 8x57mm, 10 rd
..................................................$79.95
RM47 Egyptian Maadi 10 rd. 7.62x39 mag
single stack................................$34.95
RM011 Lee Enfield MKIII 10 Round........$39.95
RM012 Lee Enfield MKIII 10 Round, Early
version w/follower retainer tab...$42.95
RM001 .22 Hornet M4 survival rifle magazine,
original.......................................$49.95
RM008 Squires Bingham .22 semi auto rifle Squires Bingham .22 Armscorp .22 Model
# 20C, 20P, 2000, 5C..................$24.95
RM007 Remington (.22 Cal) 10 Round
..................................................$19.95
RM002 Winchester M52..........................$19.95
MISC056Winchester M131 .22 rifle magazines
original factory. Almost sold out!...$19.95
BRN003 Original BRNO .22 LR bolt action 10 shot
mag............................................$39.95
RM43 Original KKW Mauser & MAS 45 .22
training rifle mag........................$24.95
PISTOL MAGAZINES
.22 CALIBER
RPM001 Astra Constable..........................$30.00
RPM002 Beretta Minx S.R........................$38.00
RPM003 Beretta Model 948 L.R................$36.00
RPM004 Bernardelli Model 60..................$34.00
RPM005 Bernardelli V.P. (Vest Pocket
..................................................$34.00
RPM006 Browning Challenger/Nomad
..................................................$40.00
RPM007 Colt Woodsman Early
..................................................$36.00
RPM008 Colt Woodsman Late (Magazine Catch
on Side)......................................$38.00
RPM010 Galesi.........................................$30.00
RPM011 Galesi (Vest Pocket).....................$28.00
RPM012 Hi-Standard Duramatic L.R.
..................................................$38.00
RPM013 Hi-Standard H.D.........................$36.00
RPM015 Hi-Standard H.D.M.....................$36.00
RPM014 Hi-Standard Model B
..................................................$36.00
RPM016 Hi-Standard Supermatic.............$38.00
RPM019 Star Model F
..................................................$38.00
.25 CALIBER
RPM126 Astra Cub...................................$34.00
RPM021 Astra Fire Cat, Orig.....................$28.00
RPM023 Bauer.........................................$32.00
RPM024 Bayard.......................................$30.00
RPM025 Bayard Model 1908.....................$30.00
RPM028 Beretta Jet Fire...........................$32.00
RPM026 Beretta Model 1915....................$28.00
RPM029 Beretta Model 418......................$35.00
RPM030 Beretta Model 950B....................$34.00
RPM027 Bernardelli Flat Bottom
..................................................$28.00
RPM031 Browning Baby...........................$32.00
RPM032 Browning Model 1906
..................................................$25.00
RPM033 Colt Repro/Hammerless
..................................................$32.00
RPM034 CZ-DUO.....................................$32.00
GLOCK 17 - 17RD,
9MM MAGAZINE
Composite magazine
holding 17 rds.
$14.95 RPM292
TAURUS M92 9MM
Super price. $17.50ea,
3 for $48.00 RPM112
DESERT EAGLE MAGAZINE
Original .41 caliber
magazine holds 8 rds of
‘wall blasting’ ammunition - Used, excellent.
Difficult mag to find!
.........$35.00 RPM303
TOKAREV 7.62x54
RIFLE MAGAZINES
New Condition
$79.95 MISC053
STAR 9MM SUPER MAGS
ORIGINAL MAGS FOR STAR MODELO
SUPER 9MM LARGO.
$24.95, RPM132
MODEL 1911 .45 DRUM
MAGAZINE
Original in very
good condition.
Rarely found nowadays! 7.62x39
caliber, 10 round
.....$95.00 RM40
Fast shooting became much more
fun with this reliable and well-made
28 rd, .45 ACP, drum magazine for
the 1911 pistol. Easy to load and
operate!
............................ $59.95 RPM309
RPM035 CZ-Model 1936...........................$26.00
RPM038 Mauser Model 1910
..................................................$35.00
RPM037 Mauser WTP...............................$28.00
RPM039 Ortgies.......................................$34.00
RPM040 Raven.........................................$21.95
RPM041 Sterling Model 300......................$26.00
RPM042 Unique.......................................$26.00
RPM043 Walther Model # 8.......................$36.00
RPM044 Walther Model # 9.......................$35.00
RPM045 Walther Model 2&5
..................................................$28.00
RPM046 Webley Model 1906/1909 w/o Ejector
..................................................$28.00
.32 CALIBER
RPM047 Astra Model 300/3000, Side Magazine
Catch.........................................$26.00
RPM048 Bayard Model 1908.....................$34.00
RPM049 Beretta Model 1919....................$34.00
RPM050 Beretta Model 1934....................$38.00
RPM051 Beretta Model 70 Puma
..................................................$36.00
RPM053 Browning Model 1900.................$35.00
RPM054 Browning Model 1910
..................................................$35.00
RPM055 Browning Model 1922
..................................................$35.00
RPM263 1922 Browning German
Marked.......................................$50.00
RPM056 Colt Model 1903.........................$34.00
RPM057 CZ Model 1927 ..........................$36.00
RPM058 Dreyse Model 1907.....................$34.00
RPM059 Femaru Model 37........................$40.00
RPM060 Frommer Stop............................$36.00
RPM064 MAB Model D .32 ACP orig.
..................................................$22.95
RPM065 Mauser Model 1910, 1914, 1934
..................................................$40.00
RPM066 Mauser Model HSC.....................$42.00
RPM067 Ortgies.......................................$36.00
RPM070 Sauer Model 38-H.......................$38.00
RPM072 Steyr .........................................$28.00
RPM073 Walther Model #4 .......................$35.00
RPM075 Walther PP/PPKS, early flat side repro w/
finger rest...................................$38.00
RPM076 Walther PPK................................$34.00
RPM078 Webley........................................$30.00
.38 & .357 CALIBER
RPM079 Colt Model 1900 .38 Auto
..................................................$38.00
RPM151 Colt .38 Super............................$29.00
RPM131 Desert Eagle .357
..................................................$35.00
RPM080 Llama .38 Super, Narrow Floorplate
..................................................$30.00
RPM081 Llama Model 6 .38 Super
..................................................$30.00
RPM082 Llama Model 8 .38 Super
..................................................$30.00
RPM083 Star Model A .38 Super 9mm
..................................................$38.00
.380 CALIBER
RPM182 Beretta Mod 70S.......................... $30.00
RPM084 Browning Model 1910.................$35.00
RPM085 Browning Model 1922 ................$35.00
RPM088 Colt Pony (Star-Model D)............$38.00
RPM153 Colt Mustang..............................$28.00
RPM089 CZ DA Model 1938
..................................................$36.00
RPM090 CZ Model 1924...........................$30.00
RPM091 Femaru P-37..............................$40.00
RPM092 Frommer Stop............................$28.00
RPM093 H&K Model # 4...........................$35.00
RPM094 Mauser HSC Reproduction
..................................................$40.00
MAGAZINES FOR REMINGTON .22 RIFLES
NEW!
ITEM
EGYPTIAN ‘RASHID’
RIFLE MAGAZINE
New, blued steel replacement
magazine for the 513T series
of Rem. .22 rifles and all Rem
series 500 rifles
5rd $19.95 RM058
ITEM
NUMBER
DESCRIPTIONPRICE
RPM095 Ortgies.......................................$36.00
RPM096 Remington Model 51
..................................................$35.00
RPM097 Savage Model 1910/1917
..................................................$36.00
RPM098 Walther PPK
..................................................$32.00
RPM099 Walther PPK/S
..................................................$27.00
9MM CALIBER
RPM290 .22 TCM/9mm 17 round.............$32.99
RPM159 Astra Model 400
..................................................$24.95
RPM101 Astra Model 600
..................................................$36.00
RPM150 Beretta Brigadeer & Helwan........ $30.00
RPM105 Browning Hi-Power 13 Round, Blued
(9mm Caliber).............................$17.95
RPM106 Hungarian Hi-Power P9R
............................................. $19.95
RPM107 Lahti Original....................... $20.00
RM39 Orig. Joloar
............................................. $60.00
RPM109 Radom
............................................. $36.00
RPM110 S&W Model 39
............................................. $26.00
RPM111 Star BM, BKM, BKS
Starfire, Starlite.................... $36.00
RPM152 Star Firestar.......................... $30.00
RPM114 Star Model B
............................................. $35.00
RPM112 Taurus Model 92
............................................. $17.50
RPM102 Glisenti repro........................ $60.00
NEW VARIATIONS OF OUR
1911 .45 ACP MAGS JUST IN THE DOOR
Stainless steel magazines
........................................ $10.95,
3 for..................... $29.95 RPM121
G.I. marked 1911 magazine marked
.45 ACP #1005-00-8694 MFR8R320.
........................................ $10.95,
3 for..................... $29.95 RPM155
WWI pattern 1911 magazines with
lanyard loop
............................ $13.95 C45295,
3 for...................................$36.95
RUGER P85
GREAT DEALS ON MAGAZINES!!
RIFLE MAGAZINES
FAL 20 rd
M14 20 rd
new $19.95 metric, new
$14.95
RM024
RM63
AK47 30rd
Yugoslavian,
original exc
condition
$22.95
AK056
AK47 30rd
Korean, exc
condition
$14.99
AK057
MACHINE GUN MAGAZINES
M1 Carbine
30rd, new
$14.95
CRB008
HIGH QUALITY 10 ROUND
.45 1911 MAG
.45 single stack magazines for 1911
Colt
Special ........................$19.95 ea,
3 for .....................$49.95 RPM127
MAKAROV ORIGINAL PISTOL MAGS
BROWNING HI POWER
ASTRA 400 MAGS
Ex. Condition $24.95 RPM268
9mm Largo - original
$24.95 3 for $64.95 RPM159
M1 Carbine
15rd, new
$12.95
CRB010
Glock 50rd
drum, new
$69.99
GLK17022
AR15/M16 100rd
drum w/bag,
loader, new
$119.95 AR383
AR15/M16
50rd drum, new
$79.95 AR422
AK47 75rd drum,
new $69.99
AK007
AK47 30rd composite,
new $9.95 or buy 2
get one FREE AK015
10 rd. AK-47 MAGAZINE
$14.99ea,
3/$35.00 AK054
UZI 32rd
steel
$18.95
UZI100
MORE RIFLE/SMG/ LMG, LARGE CAPACITY MAGAZINES
AR15/M16 Orlite synthetic 30 rd 5.56mm............................................................... $20.00 AR126
AR15/M16 PMAG, 30 rd, 5.56mm........................................................................... $12.95 GAL097
AR15/M4 PMAG GEN M3 MOE, 30 rd, 5.56mm....................................................... $13.95 MAGPUL056
AR15 15 ROUND HEX POLYMER MAGAZINE.......................................................... $15.99 RM65
BM 59 20 rd, .308................................................................................................... $49.50 BM59014
BREN LMG, 20rd, .303............................................................................................ $8.00 BREN007
BREDA 30 LMG, 30rd.............................................................................................. $200.00 RM52
CETME (C), 20rd, .308............................................................................................. $20.00 CET008
CETME (L), 30rd, 5.56/.223.................................................................................... $7.00 CET023
CHATELLERAULT M24/29 LMG, 25rd, 7.5mm........................................................ $20.00 RM27
DANISH M40/M1941, 100rd Drum, 8mm................................................................ $250.00 MISC287
DP28, 47rd drum, 7.62mm...................................................................................... $25.00 DP2806
DPT, 30rd drum, 7.62mm........................................................................................ $30.00 MISC220
ERMA 32rd 9mm Largo........................................................................................... $35.00 RM54
FAL, 20rd, 7.62mm.................................................................................................. $14.95 RM63
FND LMG, .30-06, 20rd........................................................................................... $10.00 FND005
GALIL BLANK FIRING MAGAZINE, 35 rd, .223......................................................... $19.95 GAL097
GALIL 35rd steel mag.............................................................................................. $19.95 GAL093
GALIL 50RD MAGAZINE.......................................................................................... $29.95 GAL004
M8 SPOTTING RIFLE 20RD MAG, .50CAL................................................................ $125.00 106R021
MAS 38 SMG, 32rd, 9mm........................................................................................ $25.00 RM26
MG34 50rd BELT, 8mm........................................................................................... $5.95 MG34075
Mini 14, 30rd, .223.................................................................................................. $25.00 MINI404
MP34 SMG, 32rd, 9mm........................................................................................... $35.00 RM32
OERLIKON DRUM, 20mm........................................................................................ $275.00 MCAN017
PPSH 41 DRUM, 71rd, 7.62..................................................................................... $40.00 MISC269
SCORPION SMG, 20rd, .32...................................................................................... $19.95 SCR008
STEN SMG, 32rd, 9mm........................................................................................... $25.00 STN007
SWEDISH K SMG, 30rd, 9mm................................................................................. $45.00 SWK038
RPD Drum w/100rd belt. New or like new................................................................ $59.95 RPD14
THOMPSON SMG, 30rd, .45.................................................................................... $30.00 TMP074
UZI SMG, 25rd, 9mm............................................................................................... $18.95 UZI099
UZI SMG, 32rd, 9mm............................................................................................... $18.95 UZI100
YUGO.M56 SMG, 30rd, 7.62.................................................................................... $45.00 RM45
ZB-26 LMG, 20rd, 8mm........................................................................................... $49.95 RM55
New, blued steel
magazine for all
.45 ACP Government Model/
M1911 type pistols. Base plate also
acts as finger rest to improve your
grip on the gun.
...................... $16.95 ea. RPM122
15rd 9mm Magazine, Stainless
Steel..............$25.00 RPM230
13 round – Super price. $17.95,
3 for $49.50 RPM105
ABOUT HIGH CAPACITY MAGAZINES:
Although we try to stay abreast of current State gun laws, it is a herculean task with
over 20,000 laws on the books. By ordering, you are stating that you are complying with
your Local & State laws. Most States allow large capacity magazines. Some do not. If you
are unsure on this issue, contact your Local or State law enforcement to confirm what is
allowed. This is a partial list of States with some hi-capacity restrictions: NJ, NY, MA, MD,
HI, KS, CO, CT, IL and various county laws therein including Chicago, D.C.
8 ROUND .45 MAGAZINE
Steel CZ-52, 8rd magazine for 7.62x25mm
Ammunition. Original
CZ mag body! Get one
now before they’re
gone again!
$17.50 CZ5202
G2
Model 1911, 8 round .45 ACP stainless steel magazine
................................................................. $15.95 RPM306
Model 1911, 15 round .45 ACP stainless steel magazine
................................................................. $17.95 RPM307
Model 1911 , 15 round .45 ACP standard blued finish
magazine....................................................$17.95 RPM308
.41 & .45 CALIBER
RPM289 1911 Double Stack 13 round (.45 caliber)
..................................................$24.99
RPM119 Ballister Molina (.45 Caliber)
.................................................... $5.95
RPM122 Colt 1911 Blued 8 Round
(.45 Caliber)................................$16.95
RPM123 Colt 1911 w/Lanyard Loop (.45
Caliber).......................................$45.00
C45103 Colt Import Model 1911 (.45 Caliber)
.................................................... $6.95
RPM121 Colt Model 1911 Stainless Steel 7
round (.45 Caliber).....................$10.95
RPM137 Norwegian Model 1914 Original (.45
caliber) Rare.............................. $65.00
RPM118 Star Model S.S. (.45 Caliber)...... $38.00
RPM117 Star Model PD (.45 Caliber)........ $35.00
CZ-52 PISTOL MAGAZINE
See sarcoinc.com for
extensive magazine
listings
JUST IN …..
FOR YOUR MODEL 1911 PISTOL!
ORIGINAL TOKAREV PISTOL
MAGAZINES 7.62x25
1. Standard mag or Chinese model 213
........ $18.00 ea, 3 for $49.50 TOK052
2. Few Tok mags w/lanyard loop or Chinese
model 213
..................................... $24.00 TOK085
3. Orig. finger rest Tokarev mags cal. 9x19
(Luger). Chinese model 213B
..................................... $40.00 RPM163
Swiss K31 Rifle Magazines....$51.00 RM51
U.S. G.I. MAGAZINES FOR
BERETTA M9 & M92
- Just In New in wrap................... $16.95 BR9207
COLT JUNIOR .25
MAGAZINE
Original COLT .25 ACP magazine
in stainless steel. Holds 7 rounds.
Got lost in our ‘grotto’ 25 years
ago. Hard to find originals! New old
stock. Very Limited.
............................$34.95 RPM291
EGYPTIAN HAKIM
8X57MM RIFLE MAGAZINES
Just arrived. Only got 40 mags so get yours
now .....................................$79.95 RM46
Please note: These magazines have slightly
over-sized catches to accommodate worn
receivers. In certain instances, the catches
might have to be adjusted to allow proper
seating in the mag well.
P38 MAGAZINE
New production............$19.95 P38034
VZ52 RIFLE MAGS 7.62x45
Just found a small quantity
........................................ $64.95 RM58
LAHTI PISTOL MAGAZINES
Genuine Swedish surplus magazines for the
9mm Model 1940 Lahti Pistol. Excellent condition. $20.00 ea., 3 for $49.95 RPM107
I2
SPECIAL OF THE MONTH!
Take 20% Off this M1A1 stock for Ruger 10/22 purchase
SARCO’S M-1 CARBINE STOCK CONVERSION
FOR THE RUGER®
10/22®
Stock
50 18042
Hilton Street,
EastonSTOCK
PA 18042
M1A1
FOR RUGER® 10/22® IN STOCK!
50 Hilton Street, Easton PA
www.e-sarcoinc.com
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
Hot/ off
the wood mill, we’ve got the best stock to trick
610.250.3960 Fax: 610.250.3961
out your fine 10/22® rifle. Simply insert your barreled
www.e-sarcoinc.com
action into Sarco’s stock assy, and within minutes you
have a version of the 10/22® that closely resembles and
WW2 JAPANESE ARMY CARTRIDGE
handles like a U.S. Paratrooper M1A1 Carbine! Comes
BELT SET Excellent quality leather belt
complete with handguard and swivel band assy. Looks
and pouch set with bayonet frog as
great, and with a folding stock, you will benefit from
issued to Imperial Japanese Infantry.
the versatility of use and easy storage! Beautifully made
Very rugged, sturdy, high grade belt
hardwood stock, handguard, and metal & leather folding
set with brass buckle. Consists of belt,
stock assy, are sure to convince friends that you have a
3 pouches and frog. Adjusts out to 46
real .30 cal. M-1 Carbine. Makes one of the world’s best
inches...................... $49.95 MISC489
.22 rifles even better!......................... $149.95 STK380
Sarco
Ruger® 10/22® rifles
are a great platform
This is what you don’t get.
for making all sorts
Our stocks are authentic
M1 Carbine.
of custom hunting,
target, and military
configuration rifles. We like it just the way it is, but now
we have constructed a new way to enjoy this dependable
firearm. Sarco, Inc. has created the M-1 Carbine stock
specifically made to drop the 10/22® rifle into without
any alteration! That’s right! No alterations! The front
sling swivel is also properly installed like the USGI M1
Carbine. Others stocks on the market do not have this
accurate feature. The wood grain/finish mimic the Tung
Oiled finish of the Govt. Carbine stock. This fine stock
comes with matching wood handguard, steel buttplate,
M1 Carbine front band, M1 Carbine sling and oiler
........................... $74.95 or 3 for $199.95 STK340
(This is a SARCO, INC. product for use with the 10/22®)
NEW!
ITEM
1st Grenadier Guard Flag as flown over
the battlefield at Waterloo, 200 years
ago. This flag represented the personal
guard of Napoleon. Just about impossible
to find this flag anywhere on the market.
Dimensions of @3 feet by 3 feet. One side
of the flag shows the unit designation
and the other lists 15 battle honors up
until Waterloo. A strikingly glamorous
flag with gold fringe for display or household decor................... $34.95 FLAG03
M1 CARBINE PARTS & ACCESSORIES
Dont forget to visit
E-SARCOINC.COM for 1000's of
Carbine Rifle items!
OUR FAMOUS M1A1 PARATROOPER CARBINE STOCKS
AVAILABLE AGAIN !!
M1 CARBINE BARRELS
New & Made to the G.I. Print !
WWII PATTERN M1 CARBINE
CARRYING CASE
These are a very close copy of the
World War II M1 carbine case. Made
from the same type and color heavy
cotton O.D. duck, with proper brass
zipper and leather tabs, this case
is even “U.S.” marked, as were the
originals, carrying strap included. Will
hold all M1 and M2 carbines. Ideal for
storing or carrying your carbine; for
reenactors and collectors. New condition SALE!!..................$17.50 ea.
3 for...................... $47.50 CRB094
M1 CARBINE DUAL CLIP HOLDER
$5.95 CRB101
M1 CARBINE SPRING & PIN KIT
All the pins & springs in a M1 Carbine
$9.95, 3 for $27.95 CRB173
M1 CARBINE PISTON NUT WRENCH
Available again................$12.95,
3 for..................... $34.95 CRB003
CARBINE TOOLS & ACCESSORIES
Blank Adaptor.........$9.95
Magazine, 15 shot, new
............................ $11.95
Tool, trigger spring removal
...............................$3.95
Bolt Assembly tool
............................ $22.50
NEW M1
CARBINE TOOLS
JUST IN!
NAPOLEONIC FLAG
CRB093
Finally after decades of searching for M1 Carbine barrels worthy of consideration as a replacement on a GI issue Carbine,
Sarco has obtained brand new U.S. made barrels in 4140
steel that are completely machined, bored, properly cut with
inlets for the front sight, machined & swedged gas block/
piston, breech with proper hood not found on commercial barrels, and bore with a 1 in 20 twist! What better way to obtain
an M1 Carbine barrel with the true military GI profile! Barrels
are in the ‘white’, without finish. Finally you can be assured of
the perfect replacement barrel for your M1 Carbine.
NOTE: features of this barrel also include : USA MADE BY
NEW!
Short chambered .015
OLD SCHOOL
ITEM
BARREL MAKER
Heat treated 4140 (28-30 RC)
Gas Cylinder/Block made from 4140 steel, rolled and swedged
onto the barrel. These are NOT castings nor are they soldered
or welded onto the barrel, but made from forged bar, pressed,
swedged, and rolled into place as the original GI barrels were
prepared! This process alone, separates the quality of this
barrel over the competition! All of the quality steel, preparation, machining, and U.S. skilled labor involved to bring this
barrel to you…and we can still offer this at an amazing price!
Sarco’s special introductory price: $149.95 CRB183
M1 CARBINE RECEIVER DEMIL FRONT
Front 2" of a Carbine receiver ....$12.50 CRB028
Sheared rear end of a Carbine receiver – sheared in front of rear
sight base........................................................... $9.95 CRB179
Set of both of above............................................. $18.95 CRB180
CRB004
We have M3 sniper scopes and
one super rare M2 sniper scope in
stock. Also new original G.I. parts –
Check our website or call MG Dave
CRB002
M1 CARBINE SCOPE MOUNT
CRB010
NEW!
ITEM
A. Front sight
installation tool
..............$26.50 CRB174
B. Front sight removal tool
..............$26.50 CRB175
C. Receiver wrench with barrel
block set for barrel removal
and installation
..............$49.95 CRB006
SPECIAL – Set of all A, B & C tools
....................................$99.50 CRB176
D. Rear sight installation adjustment tool
....................................$79.95 CRB177
SPECIAL – Set of all A, B, C,
& D tools above
.....................$159.95 CRB178
Sorry tools are not returnable
M1 CARBINE MAGAZINE
DUST COVER
Original rubber dust covers back in stock after
many years! These are G.I. and
in excellent condition. They fit
easily over the top feed area of the
magazine.…
5 pcs. for........................... $4.95,
10 pcs. for.........................$7.95,
25 pcs. for........... $14.95 CRB095
Installs in seconds with no special tools. No drilling
or tapping. Fits all G.I. or commercial carbine only
$11.95 $17.50 CRB103
Scope mount with 1” rings
$15.95 $22.50 CRB104
Special of the Month
Original military cartridge deflector
for M1 Carbine – fastens to top of
receiver w/wire form
“grippers” to deflect
NEW!
fired cases to right of
ITEM
gun – keeps ‘em out
of your line of sight.
New surplus.....................$7.95,
3 for...................$19.95 CRB096
ERMA EM1 PARTS AVAILABLE!
SEE OUR WEBSITE!!
M1 CARBINE SPRING KIT
A put-away special: slide
stop, recoil, extractor, ejector,
sear, hammer trigger, & mag
catch spring $14.00 value.
Only $6.95, 3 for $18.95
CRB137
NEW!
ITEM
This is a perfect and exact reproduction of the
WWII M1A1 Paratrooper Stock. Each stock
has a matching handguard, so your treasured
carbine will look beautiful.
(See website for other M1A1 Stock Parts)
3 for
This is absolutely the best
quality available
$149.95
$399.95
CRB098
(Gun Not Included)
Other Accessories Available: Carbine Stock Pouch $9.45
CRB134 Sling and Oiler $10.95 CRB088
Bulk buyers of this great stock, call Dave or Cholly.
M1 CARBINE SLINGS AND OILERS
SLING AND OILER SET $10.95 ea.
50 sets for $349.50 ($7.00/set)
100 sets for $599.00 ($6.00/set) CRB088
OILER ONLY.................................................................. $4.95 ea.
50 for.......................................................................... $149.50
100 for.............................................................. $275.00 OIL019
SLING ONLY.................................................................. $7.95 ea.
50 for.......................................................................... $300.00
100 for........................................................... $350.00 SLNG005
Early WWII pattern Khaki color M1
Carbine sling............................................................ $9.95 SLNG006
M1 CARBINE MILLED REAR COMBAT SIGHT
Back in stock...........................................$29.95 CRB154
M-1 CARBINE POUCHES
& MAGAZINE SETS
Individual pouches for sale as well as combination
sets with magazines. Every order with magazines
gets a free original USGI rubber dust cover with
each mag.!
1. CARBINE STOCK POUCH - holds
2-15 rd. magazines and slides onto
the wood stock. New repro. With
markings on front & back................ $9.45 or
3 for.......................................$24.95 CRB134
( pictured on Left )
2. CARBINE BELT POUCH - holds 2-15
rd. magazines and slides onto belt.
New, GI.................................... $8.00 CRB092
3. CARBINE BANANA CLIP POUCH holds 4- 30rd. magazines. Slides onto
belt...............$9.95 or 3 for $24.95 CRB090
( pictured on Right )
____________________________
4. COMBO A: 2- 15 rd. Magazines and
Stock Pouch w/dust covers
..............................................$29.95 CRB191
5. COMBO B: 2- 15 rd. Magazines and
Belt Pouch w/dust covers
..............................................$28.95 CRB192
6. COMBO C: 4- 30rd. Magazines and
Banana Clip Pouch w/dust covers
..............................................$69.50 CRB193
*Follow State & Local laws when ordering
magazines*
Check our website for new 15 & 30 round
Carbine magazines – In stock – GI pattern
CRB010 15rd magazine...................... $11.95
CRB008 30rd magazine...................... $14.95
Ordering instructions are in the ad or on our
website
M1 CARBINE
RECOIL CHECK
New, G.I. style “muzzle
brake”, clamps onto
muzzle of any G.I.
M1 Carbine. Designed
to reduce recoil on
the M-2 Carbine. Marked “Check,
Recoil M1” on bottom
......................$29.95 ea. CRB102
M1 CARBINE
PROJECT BARRELS
These are new barrels in process
from the old PMC Carbine Factory.
Bought ‘em 30 years ago. Just dug
out of the warehouse. These are
fully profited and threaded but have
no chamber or gas block. Barrel is
milled for front sight key slot
........................... $29.95 CRB194
Your choice with gas port hole or
without.
*Front sight key slot is milled.
M1 CARBINE REAR
ADJUSTABLE SIGHTS
New condition
$17.50 CRB155
Original
leather holster
for Police
NEW!
operations
ITEM
where the
MP5 series SMG is strapped to
the leg or assault pack. Used
with the MP5A3 with mounted
light/laser on end as well as
MP5K. Old stock as used in the
late 70s/80s. These are used,
but in excellent shape. Very
Limited!
...................... $90.00 HOL133
M1 CARBINE FLASH
HIDERS
New, G.I. style flash
hider, clamps easily onto
the muzzle of any G.I.
type M1 Carbine Marked
“Hider, Flash M3”........$29.95 CRB097
SPECIAL! Flash hider recoil check
combo........................$52.95 CRB132
WWII M1 CARBINE
LEATHER SCABBARD
NEW!
ITEM
ORIGINAL BOX OF 100 DUST COVERS
M1 Carbine fans will love this deal! Original G.I. cardboard box containing 100
pcs. of the rubber carbine dust cover
..................................... $25.00 CRB188
WEST GERMAN GSG9 MP5K
SMG HOLSTER
Also have a small number of these
barrels as noted above, but with
a non-military piston housing attached.................$39.95 CRB114
Gun not included
These are truly Scarce as Hens Teeth!
For whatever reason there are very few of
these remaining on the collectors market
so we have thoughtfully had them made
from an original utilizing strong leather,
brass cover and correct fasteners, and
markings. This was used by Cavalry, on
motorcycles, jeeps, half-tracks etc. Originally made for the full stock M-1 Carbine,
it also fits similar sized firearms like the
Ruger® 10/22® with the Sarco stock.
Originals can fetch $400-$700. Sarco
brings this quality leather item to you at
the fabulous price of......$57.95 CRB189
ORIG WWII G.I. M1 CARBINE
KHAKI CLEANING ROD POUCH
New cond. Few only. WWII markings. Found in the warehouse
$9.95 CRB172
NEW FLAT (WWII STYLE) M1 FORGED
CARBINE BOLTS
Stripped $59.95 CRB070
Complete $89.95 CRB072
M1 CARBINE BANDS
First model barrel band
assembly with swivel and
screw. Perfect for restoration of an
early WWII pattern carbine. New.
Just bought a good deal on 1st
model M1 Carbine barrel bands and
will pass it on to you. Previously
$20-$25 ea, now!!............. $14.95,
3 for.......................$39.95 CRB023
J2
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
SEE E-SARCOINC.COM FOR
THOUSANDS OF K98 PARTS!
SPRINGFIELD
PARTS &
ACCESSORIES
Phones Open: Mon - Fri, 8:30am –
5:00pm Showroom Open: Monday
- Saturday, 10:00am – 5:00pm,
Friday til 8:00pm
K98 GERMAN MAUSER
ORIGINAL K98 MAUSER AMMO
POUCHES
K98 MAUSER SPARE PARTS KIT
German WW2 triple ammunition pouches used by
all riflemen. Black leather
in good shape. Getting
more and more difficult to
find originals! Markings are mixed...Pair
for............................... $50.00 MSR623
Been out of these for a while.
Now’s a great time to pick up
a pack of these original parts
before they are gone again!
Contains:
EJECTOR, FOLLOWER,
MILLED, TRIGGER
SEAR, SAFETY, FOLLOWER SPRING, SEAR SPRING,
BOLT SLEEVE, FIRING PIN, FIRING PIN SPRING
$29.95 MSR370 VALUE $65.00
GERMAN 98K WWII STYLE
MAUSER AMMO POUCH
BRAND NEW ORIGINAL 98 MAUSER
STRAIGHT BODY STRIPPED BOLTS
MAUSER STOCK MILITARY ISSUE
Extra Special – our new ’98 bolt a new extractor and a new firing pin
............... $79.95 MSR518
Pebble grain… $9.95
ea, $18.95 per
pair, $34.95 for 2
pairs MSR483
1.Israeli K98 handguard only
....................................... $19.95 MSR403
2.1908 Brazilian long rifle stock good cond.
....................................... $49.95 MSR366
3.A– Select (very few only) 1908 Brazilian
long rifle stock.............. $85.00 MSR366A
4.1908 Brazilian long rifle stock with hand guard, good cond............ $65.00 MSR375
5. 1908 Brazilian long rifle stock with hanguard,
Select............................ $100.00 MSR375A
6. Steyer M1912 stock w/buttplate & bayo lug
.............................................$39.95 MSR548
7. Steyer 1912 Rifle Stock, good
condition...............................$49.95 MSR549
Use above 1908 Mauser stocks to rework the 1908’s
with cracked stocks currently on the market.
Just in the door as I am writing this. The original
FN production. These came out of the FN Factory
in a buy of left over parts in the warehouse. Unnumbered. Never in a gun. $49.95 MSR517
See our website for 1903 Springfield Drill Rifle Barrels SPF271
1903A3 SPRINGFIELD HANGUARD
New manufacture! Spruce up that Springfield
with a new wooden 03A3 handguard with both
metal clips installed. You’ll be very glad when you replace your dinged, splintered, or
split handguard with our fresh stained replacement. Excellent quality $19.95 SPF377
1903 & 1903A3 SPRINGFIELD STOCKS
A. Good, may have arsenal repair, straight stocks................................................... $75.00 SPF118
B. Select, much better than A. Nicer finish. Only very minor or no repairs, straight stocks
........................................................................................................................ $125.00 SPF116
C. WWII scant stock (semi PG) V.G........................................................................ $125.00 SPF144
D. Composite Springfield drill rifle stock & handguard, exc cond
........................................................................................................................... $39.95 SPF257
E. Good cond composite stock and HG..................................................................... $29.95 SPF362
F. Rough composite stock and HG........................................................................... $19.95 SPF363
G. Original finger groove stock, good condition as # 118 above
........................................................................................................................ $145.00 SPF267
H. WWI straight grip finger groove, reproduction stock.......................................... $160.00 SPF251
I. Original new G.I. unissued walnut 1903 & A3 Springfield scant stocks – also
called semi P.G.................................... $199.95 SPF259 might have slight rusting on cross bolt.
Few only, found in pile. VG to Exc. These
come with a new original correct copper
headspace jam screw – not installed…
$250.00 SPF216
See our website for all M1 & M2 .22
Springfield parts.
M1903 TRIGGER GUARDS
(NOT STAMPED 03A3 TYPE)
Absolutely beautiful repro of 1903 Springfield milled
trigger guard. Can’t really tell from original. Replace
the stamped ‘A3 guard in your rifle with one of these
beauties. Finished in matte black, stripped (no floorplate) $49.95 ea. SPF117, Complete assy – trigger
guard with floorplate & catch assy $69.50 SPF343
SPRINGFIELD 1907 SLINGS, LEATHER –
AS USED IN WWI & WWII
SLNG024 WWI Model 1907 Sling (w/ brass
hardware and WWI date)........$16.95 ea.
3 for.............................................$47.95
SLNG025 WWII Model 1907 Sling (w/ steel
hardware and WWII date).......$16.95 ea.
3 for.............................................$47.95
1903A4 Springfield Scope and
Mount available – See our website
1903 SPRINGFIELD CARTRIDGE BELT
$24.95 ea., 3 for $67.50 SPF146
SPRINGFIELD RIFLE
ACCY. SET
NEW!
ITEM
Canvas roll up pouch
with original spares
like extractor, ejector
& pin ,striker, front
sight hood, 3 blade
combo tool, pull
through cleaning jag,
tub of gun grease, oiler, and a new .30 cal.
bore brush. Terrific maintenance items to
keep your Springfield Rifle running well
......................................$36.95 SPF389
GRENADE LAUNCHING
SIGHT JIG FOR 1903
SERIES
NEW!
ITEM
Springfield Rifles
and M1 Carbines
Original U.S. WW2 metal sight jig for
setting the M15 grenade launcher sight
correctly in Springfield and M1 Carbine
stocks.............................$25.00 SPF390
SPRINGFIELD HANDGUARDS
Original G.I. walnut handguards.
M1903, New, unissued
............................................ $14.95 HNGD01
1903A3 used cracked repairable
10 for..................................... $59.95 SPF261
1903A3 plastic for drill rifle.... $15.00 SPF043
1903A3 used good................ $14.95 HNGD03
1903A3 used VG-Exc ............. $19.95 SPF089
1903 handguard Type 2 (1910 to 1916)
.......................................................$150.00
1903 handguard NM........................$100.00
U.S. M1936
PISTOL BELT
New made, canvas WW2
style pistol belt with
three tiers of grommets
and in a size that adjusts
out to 45 inches. U.S.
marked
..........$16.95 MISC326
Commercial set, new.......$6.95 MSR158
MISC. 98 MAUSER ITEMS
1. Rare brass Turkish Mauser cleaning
funnel – locks on to muzzle. To pour
solvent down the bore – for Turk M1890
& M1893 ............................ $14.95 MSR300
2. Original Argentine SOM sniper scope w/base
& leather case..............................$3495.00
3. Rare M98/43 La Coruna Spanish
muzzle cover........................... $9.95 MSR217
4. M98/43 Handguards, replace your
cracked one......................... $16.50 MSR216
5. VZ24 Mauser new original stock disc.. $4.95
3 for.................................... $12.50 MSR523
6. Original Israeli K98 grenade launcher, like
new..................................... $49.95 MSR575
7. Orig Yugoslav, 98 & M48 etc Mauser oiler
..............................................$4.95 MSR576
8. Rare original 1904 Portuguese Verguiero front
sight cover, new......................$9.95 MSR591
Original stocks in good condition (no
junk)! Really hard to find on the market
now, and they normally command prices
of $200-300 when you can find one.
MSR195 German stocks with cupped buttplates - with late style
hole in the cupped buttplate......................................................................... $175.00
Get one while you can! They will not last long!
For Special Selection of what we have, add .....................................................$10.00
GETTING LOW!! ALMOST GONE!! ACT SOON!!
U.S. M1903 & 03A3 RIFLE PARTS
SPRINGFIELD M2 .22 COMPLETE BOLTS
98 MAUSER COMMERCIAL
GUARD SCREW SETS
GERMAN K98 STOCKS! JUST FOUND A HANDFUL!
Note: Almost all of our Springfield parts are original, new G.I. bought 30-40 years ago.
1.
2.
DON’T FORGET TO VISIT OUR
AMAZING SHOWROOM!! GO
TO E-SARCOINC.COM
FOR DIRECTIONS!
ORIGINAL 1903 & A3 SPRINGFIELD STOCK
FRONT ENDS – removed
from original G.I. stocks.
These are cut just behind the band – you can
use these to fix your Springfield stock with a
buttered front end. Glue it under the lower band
so you cant see it. We cut ‘em off years ago.
We’re using them too..........................$34.95,
3 for...................................... $100.00 SPF372
CHROME SPRINGFIELD PARTS
SEE OUR WEBSITE
IT
Increasingly difficult to find,
these canteens are in very
good shape with a few blemishes but
completely serviceable and with good
cork and caps! All of these have Mfg. stamps with various wartime dates on the bottom. Covers are new made,
and we have your choice of Olive Drab or Khaki covers.
All are imprinted with “U.S.” and have standard belt
hooks. It’s a great time to get them because these steel
canteens have all but disappeared from the market. Supply limited. U.S. Canteen with your choice of color Cover.
............................................................$40.00 MISC282
SPRINGFIELD RIFLE
BRAND NEW!! SPRINGFIELD 1903A3 BARRELS
1903A3 SPRINGFIELD
Same list as parts to the left only 1903A3
late pattern. Value $55.00
Special $49.95 SPF265
1903 SPRINGFIELD LOW
SCOPE SAFETY ASSY
$14.30 SPF054
M1903 & 03-A3 “SPRINGFIELD” RIFLE KITS
These kits consist of every part of the “Springfield”
rifle except the stock, receiver, and barrel assy. (w/sight bases).
Kits will have bolts, bands, stamped trigger guard, swivels, trigger,
etc. Use these kits to build up to a rifle on your receiver or to rebuild an old ‘03.
All parts are in new or like new condition.
M1903 KITS
A. Parts kit includes new handguard..$159.95 ea. SPF127
M1903A3 KITS
A. Parts kit.........................................$149.95 ea. SPF126
C. For a new G.I. 2 groove 03A3 barrel add........ $190.00
Barrels only sold at this price with kit purchase.
Note: Rear sight parts may be used G.I.
FALL SPECIAL!!
Add a new Springfield stock & handguard set to
either Springfield kit (1903 or 1903A3) for only:
1903........................................ $149.00 SPF380
1903A3.................................... $159.00 SPF381
Price only good with a Springfield kit purchase.
1903A3 PIN & SPRING KITS
.30 caliber brass bore brushes, new.
$9.95/10 • $39.95/50 •
$69.95/100
BRUSH-001
SPRINGFIELD STRIPPER CLIPS
Early brass WWI......................$4.00 ea,
5 for.................................$14.95 STC025
1903 SPRINGFIELD GRENADE
LAUNCHING BOOTS
A perfect reproduction of the
grenade launching rubber
boot (slip on) for the Springfield and M1 Garand. Absolutely meticulously beautiful!!
........................$34.50 MISC088
SPRINGFIELD PUT AWAY KIT 1/2 PRICE!
NEW!
ITEM
EXTRA LONG REAR GUARD SCREWS
FOR 1903A3 RECEIVERS
The standard guard screw only goes up part way
in an A3 receiver. This screw fills the hole to make
your rifle more attractive. Haven’t had these for 20
years. The G.I. screws only engages a few threads.
$3.95 ea, 3 for $9.95 SPF360
1903 & A3 SPRINGFIELD SPRING KIT
A put-away for the future all springs in the
gun – bolt sleeve lock, main, cut-off, sear,
floor plate catch, & magazine follow $15.00
value – Only.................................... $4.45,
3 for................................. $11.45 SPF248
1903A3 TRIGGER
GUARD ASSEMBLIES
A brand new complete assembly –
trigger guard + follower + spring + 2
screws -$51 value $39.50 SPF375
Complete assembly, used surplus - $51.50 value...
$39.50 SPF376
Trigger guard only, brand new..... $31.50 SPF079
Trigger guard, used G.I................ $32.00 SPF368
All the pins & springs in a Springfield rifle – 03 &
A3 included $9.95, 3 for $24.95 SPF341
SPF143 Screw, windage.......................................* $7.50
SPF094 r ear sight, complete without windage screw w/o
barrel ring, VG to Exc............................ $39.95
SPF264 R
ear sight complete w/windage screw & w/o
barrel ring........................................... $44.95
SPF273 1
903 sight base (around barrel).............. $45.00
* Above parts are new. Check our website for all other
‘03 sight parts
1903A3 SPRINGFIELD DRILL RIFLE BARRELS
BORE CLEANING BRUSHES
NEW!
ITEM
Yes we just received a shipment of
high quality 4140, 4-groove barrels
with shallow chamber, extractor cut, front sight cut out for base, with a 1 in
10 twist. We had these made with a shallow chamber (.044") to accommodate for receiver variations. In the white and unmarked!
................................................ $135.00 SPF387 (Very Limited Availability)
1903 SPRINGFIELD REAR SIGHT PARTS
COMPLETE HARDWARE SET FOR
Trigger, 2 sears, 1 milled follower, 2 ejector, 2 strikers, 1
mainspring, 2 trigger pins, 1/2
price special. $15.80 SPF095
ORIGINAL U.S. WWII DATED CANTEEN
WITH NEW COVER NEEW
M!
These were removed from drill rifles & have their
chambers welded or have a rod in the barrel with
a small plug weld to hold it in. Front sight base
not included................................... $12.50 ea,
10 for..................................................$99.95,
50 for.....................................$400.00 SPF270
BRAND NEW 1903A3 SPRINGFIELD REAR SIGHTS ASSEMBLIES
Forgot we had ‘em...................................$29.95,
3 for............................................ $84.95 SPF370
Original G.I. A3 rear sight new in wrap
................................................... $50.00 SPF065
Original G.I. A3 rear sight used VG
................................................... $40.00 SPF294
Check our website for A3 Sight Parts - Have all
parts
NEW GI SPRINGFIELD BARRELS
1.New G.I. 4 groove 1903 Springfield barrel, dated
1943. 1903 front and rear sight bases were added
as a modification for use as a 1903.
.................................................... $269.95 SPF386
2. M1903A3, New, G.I., 2 groove...... $199.00 SPF080
3. M1903A3, New, G.I., 4 groove...... $229.00 SPF130
SPF344
SPF016
SPF015
SPF121
SPF342
SPF353
SPF355
1903 & A3 SPRINGFIELD
BUTTPLATE COLLECTION
New G.I. milled.................................. $30.00
Used milled buttplate........................ $18.00
Standard A3 used............................. $12.00
Milled fine checkered......................... $34.95
Original G.I. die cast buttplate.......... $39.95
Hand select Smith Corona buttplate
A3, used............................................ $29.95
G.I. stippled armorer match milled
buttplate........................................... $30.00
COMPLETE NEW SCREW SET FOR 1903 &
1903A3 SPRINGFIELD Includes:
Upper band screw
Rear guard screw
Front guard screw
3 Small buttplate and
Large buttplate screw
swivel screws
Stacking swivel screw
Cut off screw
Lower band screw
Note: the 1903 kit also includes the front sight screw
(value $23.00) SPF378 – screw set for 1903A3
.......................................................... $11.95
(value $26.00) SPF379 – screw set for 1903
.......................................................... $13.95
CMP SPRINGFIELD DRILL RIFLE
REPAIR KITS
All the missing or destroyed parts. Cut off,
Front sight, Cut off spindle, Bolt body, Cut
off plunger, Striker (firing pin), Cut off spring,
Stamped drill rifle rear sight $61.40 regular
value – Sarco Value..........................$34.95
3 sets for........................................$99.95,
10 sets for.........................$250.00 SPF361
03A4 SNIPER SCOPE MOUNT BASE
Late production military scope mounts for the 03A4
sniper rifle. Parkerized steel, unmarked. Will accept
Redfield rings (not included) $44.95 SPF136
U.S. SPRINGFIELD 1903 & 1903A3 “TYPE C” FULL PISTOL
GRIP STOCKS
FALL SALE ON C STOCKS!
These stocks will fit on the 1903, 1903A1 and the 1903A3. These will also fit on
your 1903A4 sniper rifle with small inletting for the bolt handle and is also correct
for the national Match rifle.
This stock was standardized in 1928 by the army for all Springfield rifles
going forward and was issued on all National Match rifles.
Crossbolt & nut included but not installed.
Guard screw bushing included
.............................................................. $179.95 $149.95 SPF276 (stock only)
Stock with new 1903A3 handguard.......................... $199.95 $169.95 SPF278
Stock with new original G.I. 1903 Handguard.......... $189.95 $159.95 SPF277
Hardware not included.
While these are truly “drop in stocks” we cannot guarantee proper
installation as it is beyond our control. Minor variations
occur in Springfields
GERMAN WW2 TROPICAL LUGER GERMAN WW2 SPLINTER
‘B’ CAMO. M43 STYLE HAT
HOLSTER
GERMAN WW2 FIELD GEAR
Sampling of quality uniform items for re-enacting or completing
static displays. We are pleased to include uniform camouflage
fabric too! See our web site for more items.
GERMAN WW2 STICK
GRENADE (Potato Masher)
Accurately made inert German M1924
‘Potato Masher’
grenade with removNEW!
able base cap. The
ITEM
primary grenade
used throughout the war by Infantry. Comes
with markings. Excellent for re-enacting or
static displays. Real wood lathe turned handle
with steel head & cap...........$24.95 MISC464
Paratroop holster for P08/ P38.
Skeletal design safely holds the
pistol without the bulk of a hardshell holster.$16.95 HOL109
German Breadbag with strap
and WW2 markings...... $19.95
MISC403
German A-Frame with WW2
markings.......$19.95 MISC404
German canvas
leggings with WW2 markings....
$17.95 MISC405
German MP40 pouch set:
Two 3-cell pouches
.....................$19.95 MP4009
MP44 Pouch set:
Two 3-cell pouches.
.................. $32.95 MP44005
Combat Pack—soldier
canvas pack used with the A
frame........$19.95 MISC406
German A- frame with Combat
Pack.................. $37.95 MISC383
G-43 Double
magazine canvas pouch
........................................ $12.95 G43002
K98 Grenade Launcher
Pouch with strap. Black
leather........ $19.95 HOL117
German Splinter Camouflage—A favorite of the
Luftwaffe & Wehrmacht.
Fabric can be used to
make uniforms, tents, etc.
Sold by the meter: 1 meter
German Oakleaf Type B, Camouflage
Material Oak leaf camouflage material as used
by German SS forces
during the WW2. The
material is reversible so
it is great for making
tunics, trousers and
Zeltbahns. Pattern Sold by the Yard.
....................................... $22.00 MISC460
GERMAN PANZERSCHRECK LAUNCHER
SHIELD
Steel replacement shield
for the all of
the German
Panzerschrecks
that came into the country without shields in
the 1960s. This was essentially a blast shield
and frequently left on the battlefield or discarded
during heavy combat use because it sustained
damage or was unwieldy. Our new made shield
is stamped out of steel and has the glass hangers
(no glass), brackets for camo, and barrel locking
collar. No finish. Shield only. Best price on the
market!.....................................$60.00 MISC461
GERMAN WW2 HELMET CARRIER
Wearing your helmet was arduous
especially when you had to march
great distances through Eastern
Europe and the Russian plateau in
the summer. Troops were happy to
have a means to fasten their helmet
to their gear so they could use their
soft caps. Originally made in the late 1930s and
used with the M35, M40 & M42 helmets. New
made, in strong black leather with steel clips
.................................................. $16.95 HLM036
FINNISH WW2 ANTI-TANK
MANUAL
Shows use of German weapons
..........................................$7.00 SB169
WWII GERMAN PANZERFAUST INSTRUCTIONS
We have accurately copied the original
issue instructions provided to the soldier
when issued the Panzerfaust 60 Launchers..................................... $5.00 SB170
AUGENSCHUTZER ‘42’
EYESHIELDS
NEW!
ITEM
German eyeshields
for protecting eyes
from the elements.
Tinted flexible eyeshield has periphery
protection with
venting. Comes with
head strap.
Excellent condition..
............................................... $8.95 each
or 10 for........................... $49.50 MISC001
by @ 58". .. $20.00 MISC396
German Wehrmacht Note
Pad—Adjutant note pads copied from original. Size 7-1/8"
x 4-7/8"........ $3.95 MISC296
German Rubber Stamp Set—set of
6 rubber stamps used by adjutants
and units. You can mark almost
anything..... $25.00 STAMP03
German WW2 Box Stencils:
A. Panzerfaust Klein Launchers
...................... $14.95 MISC350
B. Mines/ Schutzenmne.. $14.95 MISC351
C. Panzergrenaten........... $14.95 MISC352
Or buy all 3 for................ $35.00 MISC353
WW2 Metal German Wall Plaques:
SMALL REICH PLAQUE- wingtip
to wingtip distance 15 inches
$22.95 MISC371, LARGE REICH
PLAQUE- wingtip to wingtip distance 27
inches...............................$49.95 MISC372
Mauser K98 Ammo Pouch
...................................$9.95 ea,
Pair for............................. $18.95 MSR483
Khaki canvas Luger
holster used in the
last year of the North
Africa campaign.
Strong canvas fabric
with leather accents and magazine
pouch. Luger tool pouch under main
flap. New mfr w/WW2 German markings...........................$14.95 HOL142
GERMAN OFFICER VISOR CAP
SS, White......$45.00 MISC378
GERMAN OFFICER VISOR CAP
SS, Black, Wool
.................. $45.00 MISC379
WW2 GERMAN M43 WOOL HAT
GERMAN OFFICER VISOR CAP
SS, Field Green, Wool
.................. $45.00 MISC380
GERMAN OFFICER VISOR CAP
Afrikakorps Luftwaffe
.................... $49.00 MISC38
GERMAN MAXIM MG WATER CAN
Steel WWI
designed
water can
used with
both the
Maxim
NEW!
08 and
ITEM
08/15 machine guns. Steel
casing with solid brass spigot
and brass water fill cap. Accurate copy of
the original, but stronger steel used and
resists dents and edge separation better
than the original
.................................. $85.00 MISC440
ORIGINAL WW2 GERMAN MILITARY
REPLACEMENT GLASS LENS
43mm round lens for replacing
broken lenses in the the Neophan/
Auer, German mnfr. glasses furnished to
MG13/MG34/MG42 gunners during the
war. These glasses were a familiar sight from
the 1920s through the early 40s. Usually
seen on tortoise shell and wire frame GlassMP44 Mag Loading Tool
Will save your fingers the wear es, normally issued in a metal case. Original
and tear. Works with original and
in excellent condition / Green color
repro mags.......................$5.95 MP44003 ........................................$14.95 MISC466
Mauser K98 RIFLE BOOKLET
Reprint of original WW2 German manual
.......................... $6.95 SB171
MP44 GRIP SETS
Beautiful repro MP44 grips–Just in! Made in
wood just like the original
........................................ $24.50 GRP141
German Dot-44 Camouflage—A favorite
of the Waffen SS. Fabric
to make uniforms,
tents, etc. 1 meter by
58" $20.00 MISC407
K98 MAUSER AMMO POUCHES,
ORIGINAL
Pair of German WW2 triple
ammunition pouches used
by all riflemen. Black leather
in good shape. Getting more
and more difficult to find
originals! Markings are
mixed
.....................................$60.00 MSR623
NEW!
ITEM
WW2 GERMAN HELMET LINER
Double steel banded liner with
German markings, leather lining,
and correct M31 German Chinstrap
with buckle and metal studs. Size is
7-1/2 inch (Large). Excellent replacement for worn or damaged liners in M35, M40 &
M42 helmets.............................$21.95 HLM035
REICH EAGLE STENCILS
Steel stencils great for marking
up boxes, vehicles and other
WW2 display items. Two sizes
available. Reusable, easy to clean
and flexible. LARGE REICH EAGLE STENCIL,
13"x10"$22.00 MISC279 SMALL REICH EAGLE
STENCIL, 9"x6".......................... $18.00 MISC280
GERMAN MP44 (STG) ‘BUTTSTOCK’ MANUAL REPRINT
OF THE ORIGINAL GERMAN WW2 POCKET MANUAL ISSUED WITH THE ASSAULT RIFLE
This is the 1944 updated version
usually carried in the buttstock
trap with takedown tool and gas
cylinder brush..$4.95 MP44009
WW2 GERMAN SPLINTER
CAMO JACKET
(Reversible for forest &
snow camo) A favorite
of the Wehrmacht &
Luftwaffe troops! One side
is German WW2 Splinter
camo while the opposite
is white for snow operations. Complete with waist belt and hood. New mnfr.
Best Price around! $79.95. MISC472 Sizes- Large,
X-Large, 2XL (specify when ordering)
Standard
ruck or
backpack
that replaced
the 1930s
tornister
pack. The
M41 was
much better
for its mission and had capacity beyond that
of the tornister. Comes with leather
shoulder straps or you can use with
your Y straps...... $49.95 MISC487
GERMAN MP-40 SMG
(non-firing)
Excellent - new manufacture, earth brown
colored M43 cap with two WW2 emblems.
We like this one best as the color of the
cap goes well with most clothing and it
has a functional chin and ear protection
flap that is excellent protection for cold
weather. Made with a medium weight
wool so it works in North American climates throughout the year! Sizes 7-3/8",
7-1/2", 7-5/8"........... $22.95 MISC345
GERMAN M35 WW2 HELMET
Model M35 helmet
with leather steel
banded liner and
leather chinstrap and
shell with rolled edge
like the originals.
We provide a free
German WW2 era
emblem decal. U.S.
Size is @7-1/2",(Large), which works well
between 7-1/4 to 7-5/8" head sizes. New
mnfr., Green................ $49.50 HLM037
GERMAN LUFTSCHUTZ WW2
HELMET
GERMAN G-43 MAGAZINE
Famous full size
display gun with
operating bolt, recoil
assembly, folding
stock, mag catch
and trigger. Saw combat throughout Europe,
Africa, and even Vietnam! Bound to spark
interest and conversations from all who see
it. Realistic metal and plastic construction
and it comes with steel magazine and leather
sling.................................. $210.00 REP02
WW2 GERMAN BOOT KNIFE &
SCABBARD
NEW!
M
ITE
Fighting knife
or utility
knife, this new
made version
of the venerable German
‘trench knife’
is convenient
and easy handling. Blade is @5-75 inches
long and steel scabbard has a 2-3/8 inch
suspension clip. Wood slotted grips.
.................................... $24.95 BAY269
GERMAN LUGER PISTOLS
www.e-sarcoinc.com
GERMAN METAL HAND STAMPS
Metal handstamps for imprinting
leather, wood and soft metals with
iconic WW2 German markings commonly found on issue items. Just like
the original production and inspector
stamps!
SET OF WWII GERMAN INSPECTOR’S STAMPS
One of each of the German WWII
Date/Code stamp & the Waffen
Eagle inspector's stamps. Perfect
for adding interest and value to
your original or reproduction leather harnesses, holsters, belts, wood, and soft metal
items. Simply wear safety glasses, hold the
metal hand stamp and hit it with a hammer
to leave a clean impression of either the German WWII Date/Code stamp or the Waffen
Eagle inspector's stamp. These are not for
hardened 'gun' metal, but can be used to
stamp non hardened items like wood stocks,
copper, brass, leather etc. Stamps are well
made, shipped in perfect condition and not
returnable$100.00 STAMP06
Waffenstamp size: 1/2"x7/16"
Date/Code stamp size: 1/2"x1/2" '44 date
DATE/MANUFACTURE CODE STAMP
............................ $65.00 STAMP05
WAFFEN #135 METAL HAND STAMP
............................. $50.00 STAMP04
WAFFEN #655 METAL HAND STAMP
..........................................$50.00
WAFFEN #623 METAL HAND STAMP
..............................$50.00 STAMP08
REICH EAGLE HAND STAMP
..............................$50.00 STAMP10
NEW!! WW2 ITALIAN FASCIST HAND STAMP .........
.............................$60.00 STAMP11
All steel construction, this full size
WWII German
Panzerfaust Rocket Launcher was the precursor for the RPG series. It packed a terrible
punch and gained respect by Allied tank
crews who faced this on many campaigns, especially when driving through small German
towns where it was the easiest way to close
down a road. Our Panzerfaust comes complete
with a reprint of the original WWII operator
instructions, flip up sight/trigger unit, and
rocket with flexible fins. A terrific display piece
for museums, static displays or
reenacting..............$180.00 RL002
SOLDBUCH (book)........$6.75 SB168
WW2 PANZERFAUST 60M ROCKET
Full size, inert, steel replica of the
original warhead used to defeat
American and Soviet Armor in
WW2. Very realistic with folding
fins.................................................... $75.00 RL003
WW2 GERMAN PANZERFAUST ‘KLEIN’
ROCKET
(3 VARIETIES)
Beautifully made, full size
replicas in metal with
knurled wood grips. Very
realistic looking. We offer
a couple with and without
holsters:
1. Standard luger w/ 4" barrel
............................................. $112.95
Standard luger w/ WWI canvas holster
............................................. $122.95
2. Naval Luger w/ 5" barrel........ $112.95
Naval Luger w/ WWI canvas holster
............................................. $122.95
3. Artillery luger w/ 8" barrel.....$124.95
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
GERMAN PANZERFAUST 60M
LAUNCHER & ROCKET (Inert/Non-Firing)
Well-made multiple piece construction like the original. Used
by all of the services. Large size
7-1/2" ............$55.00 HLM024
Well-made and tested, steel 10rd.
magazine for the G-43 semi-automatic rifle. Meticulously made identical to
the original............. $44.95 G43001
WW2 GERMAN M41
RUCKSACK
MAKE YOUR OWN TENTS OR ZELTBAHN !
M2
The M43 cap is a true German
innovation from WW2 and our
Enlisted hat
newly manufactured splinter
camouflage cap is sure to
satisfy. Strong HBT material w/
venting grommets. Used by Luftwaffe and Wehrmacht units in
the last years of the war. 4 sizes Officer’s hat
available: 7-1/4", 7-1/2", 7-5/8", 7-3/4.
Both Enlisted & Officers version are available. Officers hat comes with sliver braid
piping and badge on front. Enlisted hat
has no attached embroidery. ENLISTED
SPLINTER B HAT......... $19.00 MISC375
OFFICER’S SPLINTER B HAT
................................... $20.00 MISC376
The first ‘bazooka rocket’
of the war! Full size, steel,
inert. New........................... $60.00 RL004
REP06
REP14
REP09
REP18
REP10
PPK PISTOL (NON - FIRING )
Another of
our well-made
metal replicas
of the stalwart
sidearm of the
Wehrmacht,
007, and many
other good
guys and arch
villains! Full
size metal replica with moving slide and
hammer/trigger click...... $84.95 REP21
SEE E-SARCOINC.COM FOR MORE AMAZING ITEMS!!
GERMAN WW2 MP44
ASSAULT RIFLE (NON-FIRING)
Full size,
solidly built
with some functioning parts.
Comes with magazine.
Feels and looks like the
real thing!...............................$240.00 REP03
GERMAN P38 PISTOL (NON-FIRING)
Issued to Wehrmacht
troops in 1940, this
pistol became the regular
sidearm of 3rd Reich
Officers & some NCOs.
Cheaper to produce than
the Luger, it was light and effective.
NEW!
Even a half pound lighter than the Model
ITEM
1911 and with an 8 rd. magazine. Our
authentic looking non firing display
gun looks and feels like the real thing. Slide can be
cocked, hammer pulled and trigger squeezed with
a distinctive click. A classic display piece in metal
with black plastic grips like the original. We have two
offers: 1. P38 non firing pistol........... $72.95 REP05
2. P38 pistol with our WW2 dated hard shell holster
........................................................ $87.95 REP15
O2
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
PLEASE VISIT US AT
E-SARCOINC.COM!! OR
BETTER YET, VISIT OUR
SHOWROOM IN EASTON, PA!!
Showroom Open:
Monday - Saturday,
10:00am - 5:00pm
Friday til 8:00pm
SARCO HAS A NICE ASSORTMENT OF GERMAN WWII SCOPES & ACCESSORIES
ZF39 SCOPE FOR GERMAN 98K WWII SNIPER RIFLE
Here you have a faithful reproduction of the ZF39 Scope as used by German Snipers
during WWII. This scope has the proper finish, weight, size and steel tube diameter
(26.5mm) to install the low turret mount and short side rail mount that
Germany produced for their Sharp Shooters (Scharfschutzen). The power
scope has bullet drop compensator that runs from 100 to 1,000 meters, with
increment marks every 50 meters and a focus adjustment vane. The three-post
reticle and clarity is superb, both ends are just hand tight in order to remove and
install closed rings low turret mounts, if other mount is going to be used, just
tightened by hand all the way. Now you have the chance to get your Mauser 98K or
long rifle fitted with the optics and mounts that made the German Sniper System so
famous. Best of all is at a price you can afford !!!
MAUSER SCOPES & MOUNTS
MSR499 ZF39 Scope 4 power............................... $299.00
MSR573 ZF39 scope 6 power................................ $299.00
MSR401 Short side rail scope mount assembly..... $199.00
MSR545 Low turret scope mount assembly with closed
rings....................................................... $175.00
MSR544 Low turret scope mount assembly with split
rings....................................................... $179.00
MSR500 Mauser swept back scope mount............. $149.95
MSR501 Mauser swept back mount with ZF4 scope
.............................................................. $429.00
MSR554 ZF39 scope with closed ring low turret mount –
specify 4 or 6 power............................... $435.95
MSR555 ZF39 scope with split ring low turret mount
Specify 4 or 6 power scope...................... $459.00
MSR571 ZF39 sniper scope with short side rail mount Specify 4 or 6 power............................... $449.00
Please Note: Base screws are not included.
closed ring low turret
MSR545
Open ring low turret
MSR544
GERMAN WW2 ZF39 SCOPE MOUNT
New and accurate
manufactured Scope
Mount as used by the
Wehrmacht & SS from
1941-1945. Improved
last model mount with
the top lock screw,2
pins and extra long
locking lever. Set up with 27mm
rings. If you need for a 1” scope,
we can include shims at no
charge, but you must ask! Perfect
for creating a WWII German
Sniper Rifle
......................$199.00 MSR401
THE ZF41 MOUNT
Was made by Berlin-Lübecker Maschinenfabrik, a German WWII firearms
manufacturer, the company made all the
ZF-41 Marksman scope mounts from 1941
till 1944.
Another added feature is that you can
install it yourself without the need for drilling and tapping and that was something
the German Army had in mind, they could
send the mount and scope to the field and
with a small punch and a brass hammer,
the scope was installed in minutes, thus
making a standard 98K into a Sniper
System.
You will ask yourself, how come I did not
buy it sooner?
ZF41 Scope....................$289.00 MSR473
ZF41 Scope Mount.........$189.00 MSR474
ZF41 Scope & Mount.....$469.00 MSR476
Exact repro of the original ZF41 Scope
can cover with cleaning bursh, sunshade
retainer & canvas belt strap
.....................................$200.00 MSR475
Now set as a package deal. You canhave
a ZF39 K98 Mauser sniper scope with the
side rail mount assembly....... $449.95,
3 for........................ $1249.95 MSR571
Please Note: The closed rings are standard
WWII issue but many folks want the open
rings for ease of installation and the open
rings are acceptable in the national sniper
scope matches.
WW2 ITALIAN M91 FIGHTING KNIFE
Say what you will about the Italian Army
in WW2…. But one thing is true, and that
is the quality of their fighting instruments
like the M91 knife were among the finest
battle weapons. Our late production knife
with scabbard is a terrific combat knife
sporting an 8 inch steel blade, hardwood handle and scabbard with locking
belt keeper. It has very good balance
compared to most fighting knives that
are usually way too heavy on the grip
end. U.S. GIs loved to use them for knife
throwing. Originals will cost you $400800. Sarco’s price buster special
.....................................$26.95 BAY255
Original FN contract scope mount for the FAL rifle. Each mount is fastened to a standard metal FAL rifle cover and the mount can be reversed, depending on the scope
and eye relief required. Standard Nato lug notches are inset for settling the scope in
place. We offer two versions: Standard Stanag Mount, and Paratrooper Stanag Mount
for which there are distinct differences in the metal cover used. These are in excellent
shape, but may have some slight blemishes from being stored for 20+ years. SARCO is
selling these at a fraction of the original price!
A. STANDARD FAL STANAG MOUNT............................................................................................. $74.95 FAL195
B. PARATROOPER FAL STANAG MOUNT ..................................................................................... $99.95 FAL196
*RED/GREEN DOT SCOPE*
SARCO also sells our Stanag Mounts with a versatile Red/Green dot scope, with fast on/off locking levers.
Features:
• Emerald lens coating/anti glare -unlimited eye relief.
• 4.0 MOA dot sight with red or green illumination.
• Flip open front & rear caps.
• Illumination rheostat w/ various brightening levels / adjustments.
• Fits Picatinny mounting rails - Which is why we can offer it to you
with one of the STANAG MOUNTS at a package price!
SCOPE W/ STANDARD STANAG MOUNT..................................................................................... $129.95 FAL280
SCOPE W/ PARATROOP STANAG MOUNT................................................................................... $149.95 FAL281
PURCHASE EITHER ITEM# FAL 195 OR 196 - and receive an original night vision mount adapter.
PURCHASE EITHER ITEM# FAL 280 OR 281 - and receive a Picatinny Rail Adapter!
TAKE 15% OFF ANY OF THE ITEMS IN THIS BOX!!!
GETTING LOW!
HURRY UP & GET
ONE NOW!!
~ There are different procedures for Ordering PARTS vs Ordering FIREARMS ~
Prices are subject to change without notice. We are not responsible for
typographical errors or misprints
ATTENTION – EASTON SHOWROOM CUSTOMERS
Re: In Stock Inventory - We try and maintain stock of most items in our Easton, PA showroom,
however with the vast array of material we carry, this is not always possible. If you are planning
on visiting the showroom, please feel free to call ahead to make sure that we stock the item(s) that
you need. If these parts are not at the showroom, we will arrange to have them brought in from our
warehouse for you to purchase or look at. Please give us a least a few days’ notice before your visit
so we have time to bring the goods in. Please note that the prices in Shotgun News are dealer prices
and may not be the same prices as in our showroom. We are striving to make your shopping experience with us a pleasant and hassle free as possible.
PLEASE NOTE: Please, do not send us your original parts for comparison. We
are not responsible for lost, damaged, or misplaced parts in transit or upon
receipt. Please include only a picture and dimensions of parts needed for comparison. Thank you.
DISCLAIMER: Parts sold by Sarco should be installed only by a competent gunsmith. These products are sold as is and without a warranty. No liability is expressed or implied for damage or
injury which may result from the improper installation or use of these products.
REGARDING LOCAL, CITY & STATE REGULATIONS!
SARCO makes a large effort to keep abreast of state & local gun laws. With over 20,000 laws on the
books this is a Herculean and impossible job. Some of the products sold by SARCO could be restricted for
sale in your local area, while not restricted nationally. This could include, but not be limited to firearms,
ammo, parts, high cap mags, edged weapons, air guns, etc. You must determine your right to purchase,
own, use or resell specific products offered by SARCO in your jurisdiction. As local laws are constantly
changing, it your responsibility to determine if a product is prohibited before ordering from SARCO. You
warrant by ordering from SARCO that you are a legal adult without any legal restrictions from ordering
and are complying with all state, local, and federal laws. Please check your local laws before ordering.
LEGAL ADVICE????? PLEASE, DO NOT CALL SARCO for legal advice on guns. We are not a legal
firm and therefore are not able to give any advice. Any discussions had with any SARCO employee are
to be considered as guidance only. For questions on legal gun matters we suggest you call ATF. That’s
what we do.
Quality reproduction of this
incredibly rare
sniper scope
mount. It takes the
ZF-4 scope, which
we have available.
Mount is complete
with the rings.
These mounts were made to standardize the ZF-4 scope at the very end of
WWII. This is the rarest of the rare. It
comes complete with the mounting base
& rings & screws for attachment to a
standard 98K WWII Mauser. Developed
by Sauer. $179.95 MSR500 Combo
Special – Swept back mount with ZF4
scope $469.95 MSR501
SPECIAL OF THE MONTH
MSR500 - $149.95, MSR501 $429.95
WWII GERMAN ZF39
SCOPE AND MOUNT
MILITARY ISSUE MOUNT STANAG’ FAL SCOPE MOUNTS
ORDERING INSTRUCTIONS
SUPER RARE SWEPT BACK
MOUNT FOR K98 MAUSER
SNIPER
RIFLE
PHONE ORDER – Call (610) 250-3960
ONLINE ORDER – Go to www.sarcoinc.com
FAX ORDER – (610) 250-3961
MAIL ORDER – Sarco Inc, 50 Hilton St, Easton
PA 18042
SHOWROOM VISIT – Mon-Sat 10am-5pm /
Friday Opened til 8pm
For directions to the showroom, see website.
CUSTOMER SERVICE – info@sarcoinc.com
PARTS QUESTIONS: parts@sarcoinc.com,
MACHINE GUN QUESTIONS: mgdave@sarcoinc.com
MAGAZINE SALES IN CONNECTICUT
Until we get further clarification we can ship
NO cartridge magazines, feeding devices, or
drums to Connecticut. We are able to send 10
round or under magazines to holders of FFL.
OUR INVENTORY
· We try to ship the best condition parts at the
time of your order. Some are new and some
are used, many hard to get.
· Prices are subject to change without notice.
Our ads in the Shotgun News are catalogue
prices and may not reflect any sales or higher
pricing found on our website.
· All sales subject to availability. Acceptance
or receipt of order does not constitute confirmation of order. Employees are not authorized
to modify prices or conditions stated in ads.
· All NFA rules apply.
Sarco only sells products to persons 18
years or older
Please note: Sarco’s responsibility for goods
shipped ends when it leaves our door. Lost or
damaged claims are the responsibility of the claims
carrier. We will assist in every way for you on
claims to carriers.
Visit E-SARCOINC.COM for loads
of bayonets and fighting knives!
ABOUT HIGH CAPACITY MAGAZINES:
Although we try to stay abreast of current
State gun laws, it is a herculean task with over
20,000 laws on the books. By ordering, you are
stating that you are complying with your Local
& State laws. Most States allow large capacity
magazines. Some do not. If you are unsure
on this issue, contact your Local or State law
enforcement to confirm what is allowed. This
is a partial list of States with some hi-capacity
restrictions: NJ, NY, MA, MD, HI, KS, CO, CT,
IL and various county laws therein including
Chicago, D.C.
RETURNS
We offer a 5-day inspection period on all of our
merchandise, except for special order items
which are not refundable. Items that state
they are sold “as-is” are not returnable. Tools
and marketing devices are not returnable.
· PHONE ORDERS, EMAILED, FAXED OR MAILED-IN
ORDERS: You will need a Return Authorization
Number to return something. Please email
returns@sarcoinc.com or call (610) 250-3960
ext.114
for a RT #. Feel free to check on the status of
your return, credit or refund.
· ONLINE ORDERS: Please visit our website
www.e-sarcoinc.com and click the Return Policy link. Fill out the printable form and mail it
back with your package. Feel free to email our
e-Comm department at ecomm@sarcoinc.com
to check on the status of your return or call
(610) 250-3960 and ask to be transferred to
the e-Commerce Department.
We do not refund any shipping cost unless the
error/problem causing the return is our fault.
Returns may be subject to a 10% restocking
charge.
SHIPPING
ALL ORDERS WILL BE RECEIVED,
PROCESSED AND SHIPPED OUT OF OUR
PENNSYLVANIA LOCATION.
MINIMUM SHIPPING AND HANDLING
CHARGES START AT: $9.50
Rifle Stocks and Barrels…. $12.50
Call for larger items on prepaid orders
* NJ residents please add 7% sales tax. Not
all items available to NJ residents.
* PA residence please add 6% sales tax
All orders to Alaska and Hawaii shipped
via US Mail, unless customer specifically
requests Blue or Red Label UPS (not available
for online orders). Employees not authorized
to modify prices or conditions stated in this
advertisement.
OUR GUARANTEE
Our guarantee is simple and easy to understand.
If you are not satisfied with any item received from
us you have 5 days to return it for a replacement
or a refund of the advertised price. All returns
must be accompanied by a letter WITH YOUR INVOICE NUMBER and explanation of the problem.
All returns must be in the same condition as you
received them-any alterations or work will void
the guarantee. Special order items not returnable.
We can not accept returns on TOOLS unless the
tool is defective. We do not refund any shipping
costs unless the error/problem causing the return
is our fault. Returns may be subject to 10%
restocking charge. Send all shipments pre-paid.
CODs will be refused. Any items returned due to
customer’s error are subject to a 10% restocking
charge. ($2.00 minimum). As we do not install the
parts we sell, we cannot guarantee they will function when installed by others. For proper function
and safety, many gun parts should be installed by
a competent gunsmith - see our disclaimer:
U.S. WWII PARATROOPER SIGNAL CRICKET
X2
Phones Open: Mon Fri, 8:30am – 5:00pm
Showroom Open:
Monday - Saturday,
10:00am – 5:00pm,
Friday til 8:00pm
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
JUST GOT ANOTHER SHIPMENT OF PICKELHAUBES
Finely crafted of heavy leather with solid brass trim, cockades, spike
assembly and detailed eagle emblem. These are M1895 Prussian
German Fusilier Regiment Helmets - Nicely done. All the metal is a
beautiful brass. An extremely accurate & detailed recreation and fit
for use or display and will be the topic of conversations in your collection or “man cave”. German spiked helmet. These helmets were
used up to the end of WWI. Beautiful huge brass Prussian spread
eagle on the front. Last shipment we sold out for $99.95. SARCO
struck a tremendous deal to bring you this helmet at 1/10th the
price of an original............................................... $59.95 HLM015
RUSSIAN PPSH-41 SMG (non-firing)
WEST GERMAN P6, SIG
225 HIP HOLSTER
RHODESIAN SELOUS
SCOUT RIFLE/SHOTGUN
CASE
Heavy cotton gun bag very similar to
the British rifle bag, but slightly shorter and in a mustard color. About 41" long.
Large Rhodesian Selous Scout emblem stenciled on one side. These gun bags will
hold some rifles, but were primarily used to hold Greener and Belgian Browning
Shotguns in barracks, watchtowers, Eland Armored Cars etc.......$15.95 MISC394
1889 PICKELHAUBE STEEL
W/SAXON REGIMENTAL BADGE
Truly one of the world’s first class sub machine guns of WW2 & beyond. Over 5 million produced
and many of them came face to face with U.S. servicemen in Korea and Vietnam. Spewing a voracious 900+ rds. a minute with 7.62x25 Tokarev ammo, this gun demanded respect, especially when
the Soviets outfitted entire Companies of their infantry with this SMG against German troops in
WW2 and the Chinese against U.N. troops
in Korea.This glorious full size, non-firing
display gun in wood and metal with removable 71rd.
drum, has an action that allows you to cock the bolt and pull
the trigger. We also offer an Original Ppsh41 sling and
Drum Pouch with this package ,as long as
supplies last. ( colors of pouch & sling may vary ).
EW
PPSH41 W/ POUCH & SLING... $199.95 REP29
Used in the days before and
after D-Day, this device put out a
distinctive clicking sound so that
allied troops could communicate
to “friendlies” by sound instead of
with a bullet in the dark! Probably
saved a lot of lives. Very few originals remain, except in museums.
These work well and are made of
brass with a metal flapper. U.S.
embossed….........$7.50 MISC284
N
!
ITEM
* Brass & Steel badge, Steel Spike with Cockades, brass scalloped
chinstrap. Limited Stock! THE PRUSSIANS ARE COMING! WWI
Picklehaubes Iconic head wear of Prussia and Imperial Germany
available at fabulous prices! Long recognized as a symbol of
Germany’s military might, and worn by such famous figures as
Bismark, The Red Baron, ‘Sgt. Schultz’, and Mata Hari in her
disappearing clothing act. Actually used in trench warfare in the first 3 years
of WWI. Sarco worked out a deal to provide these beautifully crafted late
manufacture helmets to you at very competitive prices.........$99.95 HLM016
BREN 30RD. .308 COMBAT VEST
Chest rigs as used with the Bren L4 series guns , AKs,
and similar assault weapons in African ‘Bush’ wars.
Originally fielded in Rhodesia for 30rd .308 magazines,
it can still be seen in use from Mali, Congo, Southern
Sudan and elsewhere on the continent. Simple, practical,
and comfortable to wear. Has fastening waist strap and
shoulder straps. This item has never been on the market!
Vest only. We offer this in two varieties:
Inert, original bodies
significantly different from
the fake cast bodies sold
elsewhere on the market.
Complete with expended
fuse and ring assembly.
Limited.....$14.50 AM032
A. Rhodesian type grass pattern
Mag. Vest $36.00 BREN129
NEW!
ITEM
NOTE ON NON-FIRING DISPLAY GUNS
STEN MK-2 SMG DISPLAY GUN
Outstanding new arrival of a non-firing, all metal
replica of the venerable Sten Gun used since WWII.
Stock is removable, bolt can be charged, and magazine is removable. We have two
versions in stock:
A. STEN MK2 WITH SLING & MAGAZINE
...........................................$145.00 REP22
B. STEN MK2 WITH SLING, ..... MAGAZINE AND
COMMANDO PISTOL GRIP FOR
CONVERTING THE GUN INTO A PARA
TROOP VERSION.................$159.95 REP23
W/20 RD. MAG. (NON-FIRING)
Some functional parts, includes sling and 20 rd. stick
magazine....................................................$242.95 REP13
B. Khaki South African
Mag. Vest $34.00 BREN130
Fits on
your
belt.
$12.95 MISC303
M1 GARAND RIFLE (NON-FIRING)
U.S. M1A1 PARATROOP CARBINE
ALLIED & AXIS DISPLAY GUNS (NON-FIRING)
While most Americans can own non-firing display guns, some States and municipalities have enacted
regulations inhibiting ownership. It is important that you check your State’s gun laws to see if you reside
in one of these areas. We cannot ship our display guns out of the country. Below is a partial list of States
where there are laws concerning ownership of display guns. Remember, by ordering from Sarco, Inc.,
you are confirming to us that you are complying with your State regulations on this issue. CA, CT, KS,
MA, MN, WI *All non-firing display guns come with an orange plug inserted in the muzzle – required by
Commerce law.
U.S. THOMPSON
1928 SMG
The wood on this rifle is better looking
than most govt. wood stocks. Wellmade w/some functioning parts…$235.00 REP08
(check local/state laws to
make sure you can own this item)
Sarco presents an increasing new line of finely made metal and wood replica firearms, noted for their
historical significance in the battle for and against, the rise of fascism and geo political domination in the
World Wars of the last century. These display guns are full size and the best quality on the market. Many
of them come with markings and or accessories not available from the competition. These are perfect for
presentation, static display, reenacting, or for outfitting that military vehicle in the garage!
Black leather P38 pistol
holster with rugged
black 2 inch wide standard WW2 Army belt with embossed
NEW!
steel buckle. @49" long with inside
ITEM
reducing length strap. WW2 markings.
New........................................$37.95 HOL134
U.S. 12 GA SHOTGUN
POUCH
ORIGINAL U.S.
BASEBALL GRENADES
Original West German hip holster
used by the Police.
These have detachable belt loop hangers.
Can be used without the
hangers by running a belt
through the back strap.
Excellent condition
...............$15.95 HOL136
P38 HARDSHELL HOLSTER W/ WW2
WEHRMACHT BELT
(NON-FIRING)
FRENCH LRAC-50 BAZOOKA
Rarely seen since their use in Indochina, Algeria, and the
Yom Kippur War, these rocket launchers were similar to
U.S. Bazookas , but added a shield and optic housing.
Very compact, they were easier to maneuver in tight spaces and primarily saw service with French forces in Colonial frontiers and the Israeli Army.
Demilled to BATF specs. Sarco is the only place to get these! $495.00 RL006 (non firing)
Also… original LRAC-50 canvas Bazooka cover from the French Army in used serviceable
condition. Covers the launcher with shield attached. Very few................$65.00 MISC410
B.
Very realistic looking with some
functioning parts. This version is
the standard WW2 model w/o bayonet lug
$218.95 REP07
STOCKS AND FORENDS ... SARCO’s GOT A
BOATLOAD OF WOODEN STOCKS & FORENDS
Super Commercial Stock Deal.... all brand
new original stocks and forends!
Seriously, a great deal on wood for
firearms under the mfg names such
as Mossberg, Marlin, H&R, Savage,
Ithaca, S&W, and Winchester. 15 difWOW! THIS IS
ferent stock and forends at a fraction
75% OFF!
of the cost and with no duplicates.
Total Value $587.00, but Sarco’s Special Price is all 15 pcs. for $150.00 or buy 2 LOTS
for $265.00! This is the best deal we have offered in a long time. I would have bought
it myself 30 years ago when we were building our commercial gun parts business. This
is a great opportunity for Gun Show sale items and if you sell 3 of the 15 items, you’re
out of it! ONE LOT of stocks & forends.... $150.00, TWO LOTS for $265.00 STK363
RPG-75 SHOULDER FIRED ROCKET LAUNCHER
Watch the news and you will probably see the RPG75 being used in
combat by both sides in the Syrian conflict! This 2 foot long inert training RPG-75, opens and extends to 35” long, when ready for fire. Very similar to the U.S. M72
LAW Rocket Launcher, this Czech made rocket launcher weighs 7 lbs., and comes with shoulder
strap and flip up sights. This is the same RPG you will see in many hot spots around the world,
especially in various Bush Wars in Africa, by SWAPO units in Angola, and the Near East
...................................................................................................................... $199.95 RL010
Properly cut British Sten MKII Parts Set
consists of T-buttstock, bolt assy. and
recoil spring, magazine housing with
catch assy./lock/ejector, trigger housing
with internals, cover & screws, rear &
front sight, and rear caps. Our fabulous
price may not last long as these guns are
getting more difficult to find overseas! Get
one before they run out. This kit does not
come with a barrel.
MKII kit w/o barrel..... $139.95 STN028
MKII kit with barrel.... $204.90 STN030
*Almost all States allow ownership of this
kit, but we recommend you consult your
local & State laws prior to ordering.
Very accurate folding stock version of the
Paratroop M1A1 carbine. Some functional
parts and magazine. $220.95 REP11
A.
U.S. M1 CARBINE (NON-FIRING)
STEN MK2 PARTS KIT
SMAW TRAINER
SARCO has a few of the Shoulder Launched
Multi-Purpose Assault Weapon training
Note: Originally
launchers as used by the USMC and U.S.
produced as a
Army. The spotting rifle, optical sight, foregrip
training unit for
and front tube have been removed and
U.S. Govt by
replaced with similar mounted parts to maintain appearance. The original F.A.T.S.
spotting rifle magazine has been fastened in the magazine well, new optical
sight is mounted and the iron sights are still in place too. This is non-firing, so no transfer or
license is needed. Made using Military parts w/some new mfg parts as needed.
.............................................................................................................. $1,200.00 RL007
Add a barrel to this kit for the discounted
price of $64.95 (barrels regularly
$74.95)
STEN MK3 PARTS SET
Properly cut British Sten MKIII parts
set with T-Stock, bolt assembly w/
cocking handle, trigger housing w/
internals, cover & screws, magazine
housing w/catch assembly, ejector and
front & rear sight, recoil spring and
rear caps. Also includes about 1-3/4"
of the front muzzle receiver tube with
front sight. This kit does not come with
barrel.
MK3 kit w/o barrel.$89.95 STN098
*Almost all states allow ownership
of this kit, but we recommend you
consult your local & State laws before
ordering.
THOMPSON 1928 DISPLAY GUN (non-firing)
Wood and metal replica of the
venerable submachine gun that
made history with gangsters of the 20s, and
our troops and allies in WW2. Well made and
has a cocking mechanism that moves back and
forth and trigger that allows the bolt forward.
Magazine catch also works. Comes with steel 50rd. display
drum. A real crowd pleaser and guaranteed to start conversations!
........................................................................................................$249.95 REP01
DISPLAY PISTOLS (NON-FIRING)
U.S. MODEL 1911 (NON-FIRING)
Full sized metal reproduction with diamond knurled wood grips.
Sold with lanyard. Model 1911 Pistol w/lanyard…
1. Model 1911 Pistol w/lanyard ............................. $135.95 REP12
2. Model 1911 Pistol Pistol/lanyard & Hip Holster
........................................................................... $147.95 REP16
RPG-7 ROCKET
Original Russian training rocket, full size, weight, and comes
with separate rocket motor in waxed container. @36" long
when assembled. Limited........................ $124.95 RL011
HARLEY DAVIDSON MOTORCYCLE
WW2 ‘WLA’ SADDLE BAGS
We sold out of these quickly last time we
had them. Tough well-made leather saddle
bags to go with a tough motorcycle and a
price that is the best around! Color- Black.
Pair of saddle…......$245.00 MISC335-BLK
Also available in brown!
GP1
S&W MODEL 10 SHOULDER
HOLSTER
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
Aviators revolver holster w/
shoulder strap. New & U.S.
embossed!.....$24.00 HOL110
1911 HAWK (matte finish)
45ACP
1911A1 G.I. TYPE
45ACP
• 45acp 5" barrel,
Government size 1911
• Matte blued finish
• GI style external parts
• Fixed rear dovetail
sight & fixed post front
sight
NEW!
• Vertical Rear serrations
ITEM
• Slightly beveled magwell
to make
magazine changes quicker &
easier
• Walnut, double diamond, fine line
checkered grips
$459.00 GUN646
• 45acp 4.25” barrel,
Commander size 1911 –
• Matte blued finish
• Novak LoMount style rear sight w/
dovetail front sight
• Front and rear angled serrations
• Extended slide stop & thumb
NEW!
safety for easy reach
ITEM
• 3 hole trigger & skeleton hammer
• Beavertail grip safety w/ memory
bump
• Lowered & flared ejection port
• Slightly beveled magwell to make magazine
changes quicker & easier
• Walnut, double diamond, fine line checkered
grips
$599.00 GUN647
1916 MODEL 1911 HIP
HOLSTER Our standard grade
U.S. WW2 PISTOL LANYARD
U.S. M7 SHOULDER
HOLSTER Standard grade
Woven cotton OD lanyard
with leather cinch & attaching
hook. Very difficult to find
originals. This was wartime
issue for the 1911 & S&W
Model 10 pistols.................$7.95 MISC385
WW2 style leather holster with
shoulder & chest strap. Right
hand draw...$29.95 HOL067
durable 1911 holster with
leg strap. Excellent value.
...................$17.50 C45112
NEW !!! IVER JOHNSON 1911's IN STOCK !!
THRASHER SS POLISHED THRASHER (matte
EAGLE (matte finish)
45ACP
black) 45ACP
45ACP
Thrasher SS Polished is
Thrasher is matte black in
• 45acp 5" barrel,
Government size 1911 Matte blued finish
• Millett, fully adjustable, white
outline, rear sight w/ dovetail
front sight
• Front and rear angled serrations
• Extended slide stop & thumb
safety for easy reach
NEW!
ITEM
• 3 hole trigger & skeleton
hammer
• Beavertail grip safety w/ memory bump
• Lowered & flared ejection port
• Slightly beveled magwell to make
magazine changes quicker & easier
• Walnut, double diamond, fine line
checkered grips
$599.00 GUN648
finish. This model comes with
Walnut large diamond grips. It has
the following features:
• Weight: 1.9 lbs.
• Barrel length: 3 1/8” black
bull barrel
• Frame and slide are 4140 CNC
machined steel
• Capacity: 7 + 1 (45acp)
NEW!
• Capacity: 8 + 1 (9mm)
ITEM
• 2 stage recoil spring system
• Military style trigger
• Beavertail Grip Safety with memory
• Military style fixed front and rear sights
• Military style thumb safety
• Ejection port lowered and flared
• Beveled magwell $524.00 GUN650
of a stainless steel construction
with a polished finish on the
sides of the frame and slide. The top
of the slide is satin in finish. This
model comes with beautiful Rosewood
double diamond, double border grips
with owl head logo.
NEW!
• Weight: 1.9 lbs.
ITEM
• Barrel length: 3 1/8" black bull
barrel
• Frame and slide are 416 stainless steel
• Capacity: 7 + 1 (45acp) - Capacity: 8 + 1
(9mm)
• 2 stage recoil spring system
• Beavertail Grip Safety with memory
• Military style fixed front and rear sights
• Military style thumb safety
$699.00
• Ejection port lowered and flared
GUN649
• Beveled magwell
“ROCK” OUT ON THE RANGE THIS SPRING WITH A NEW ROCK ISLAND!
America’s Fascination with the 1911 .45 goes on. Back to the Basics with a “good ‘ol .45” at an affordable price.
ROCK ISLAND ARMORY STANDARD 5” 1911 .45 ACP
High Quality and Great Traditional Appearance
• Beautiful GI Style Parkerized Finish • SPECIAL - 8 Round Magazine with Finger Rest
• 1911 A1 Style Sights • Long Milled Grooved Trigger - Consistent 51⁄4 to 51⁄2 Pound Trigger Pull • Flat Steel
Grooved Mainspring Housing
PARTS INTERCHANGABLE WITH U.S. G.I. • All Steel Ordinance Grade 4140 Steel - Made on Computerized Numerical Control CNC Machines • ISO 9001 COMPLIANT • ALL GUNS COME IN HARD PLASTIC
CASE WITH MANUAL & SHELL CASING
5" Pistol Not CA Legal PLEASE NOTE :ALL PISTOLS Not for Sale in Massachusetts
(Please Check Local Laws)
GUN037 - $365.00
(Extra 8 Round Mag. (Blued)
$20.00 – RPM122) Pre-Paid Orders Add $15.00 for
Shipping or Ask About UPS Overnight Saver for Faster Delivery
ROCK ISLAND RAIL GUN - TACTICAL 2011
1911 FRAMES
$119.95 GUN012
Build your own custom .45
Manufactured from 4140 Steel on CNC
Machinery. Fully machined. Above frame with our
internal parts kit ($89.95 value) for $184.95 GUN595
ROCK ISLAND 1911 MICROMAG
BLOW
22 TCM / 9MM
OUT!
Randy from GunsForSale.com writes that this is a brand new
1911-style autoloader chambered in the new .22 TCM caliber. Rock
Island Armory cartridge designer Fred Craig said the proprietary
.223-based pistol caliber round sends a 40 grain jacketed hollow point
bullet downrange at 2100 feet per second. The goal was to make a
1911-type pistol “with the same weight, but double the firepower and
delivering more foot pounds of energy.”
.22 TCM AND 9MM • 2 DIFFERENT BARRELS • Composite grips • 5
inch barrel
TWO GUNS FOR THE PRICE OF ONE ! $599.95
$569.00 GUN442
.22 TCM 1911 MID SIZE
TCM .22 Midsize standard model delivers blazing
performance using a .22 caliber bullet that travels over
2,000 fps. The gun is outfitted with an original Armscor
cartridge creaing excellent muzzle energy and light
recoil making this a truly unique high-capacity pistol.
17 round capacity $574.95
$549.00 GUN570
ROCK ISLAND TACTICAL 1911 .45
“The Hottest Seller Right Now” • .45 ACP • Semi Auto • 5” Barrel •
8 Round Magazine Capacity • Combat Sights - Dovetail • Beavertail
Grip Safety • Skeletonized Hammer & Trigger (Target Grade) • Ambidextrous Thumb Safety • CA Legal $439.00 GUN276
ROCK ISLAND 1911 .45 COMPACTS – BACK IN STOCK!!
STANDARD .45 ACP G.I.
6 Round Mag., 31/2" Bull Barrel, Not CA Legal....................... $415.95
............................................................................. $399.00 GUN035
TACTICAL .45 ACP 3.5" Barrel, Extended Beavertail Full Guide Rod Snagfree combat style sight, Fully parkerized............. $449.000 GUN569
MATCH GRADE ROCK ISLAND 1911’S JUST IN!!
The Rock Island Match 1911
O
SARC E!
USIV
EXCL
This is Rock Island Armory’s top of the line 1911. The pistol is
hand fit for superior slide and frame match. Triggers are
crisp with a clean break. The front fiber optic sight makes
BLOW
acquiring your sight picture effortless. If you are looking for a
OUT!
great range gun for target shooting or steel matches for a great
price look no further $649.99
$599.00 GUN384
.22 TCM AMMO, ARMSCOR
Specs: Caliber: .22 TCM, Grain Weight:
40 Bullet Type: JHP
1875 Muzzle Velocity
1686 fps Velocity at 50 yards
1511 Velocity at 100 yards
312 ft/lbs Muzzle Energy
252 ft/lbs Energy at 50 yards
203 ft/lbs Energy at 100 yards
A Real “Slab Side”! Full length, Squared Dust Cover with 1913 Picatinny Rail, mounted to a full-girth squared slide without lightening
cuts. In addition to the upgrades on the original Tactical model, such
as Skeletonized Hammer and Trigger, Beaver Tail Grip Safety, and
Ambi-Thumb Safety, the 2011 Tactical also adds Tru Dot™ Night
Sights as an option.
With Tru Dot Nights Sights...................................$599.00 GUN430
Without Tru Dot Night Sights............$529.99 $515.00 GUN431
Parkerized finish, Semi auto, 5 inch battle Slide and frame hand fit, Skeletonized trigger and hammer, 8 round capacity mag, front sight is a dovetail fiber
optic, rear sight is a LAP adjustable, checkered grips, ambidextrous thumb
safety, beavertail grip safety.
(this is not for 22.LR firearms)
$25.00/BOX AM144
(50 to a box)
NEED SPARE MAGS? THESE JUST IN!
.22 TCM / 9mm, 17 rd. Magazine - In Stock!.............. $32.99 RPM290
.45 1911 Compact Magazine....................................... $24.50 RPM158
1911 Double Stack .45, 13 rd Magazine - In Stock!..... $24.99 RPM289
OUT
BLOW ST
O
M
AL
OST!
AT C
9MM ROCKS
1911 COMPACT TACTICALS 9MM
3.5 inch barrel, Extended beavertail,
Full guide rod, Snag-free combat style
sight, Fully parkerized
9mm $459.99
BLOW
OUT!
$449.00 GUN568
9MM PARA (9X19)
9mm Standard G.I. 5" $409.99
$399.00 GUN341
9mm Tactical $450.00
BLOW
OUT!
$399.00 GUN342
These are not for sale in California
ROCK ISLAND ARMORY 1911A2 2011 VZ
SPECS:
- 2dot adjustable rear sight with tru-glo
high vis. Front sight
- Front and back wide-angled slide serrations
- Full dust cover rail to even the weight
and reduce recoil
BLOW
OUT!
- 13 round mag
- ambidextrous safety
- combat hammer
- extended beavertail for maximum comfort and safety.
- competition style over-sized magwell
$575.00
GUN577
ROCK ISLAND ARMORY 1911 MIDSIZE SPECS:
Chambered in .45acp and outfitted with
a shorter barrel, smooth wood grips and
a parkerized finish 1911 Midsize GI.
Faithful to the original 1911 design, the
Standard GI is equipped with a 4.25
inch barrel, fixed sights, and an 8
round magazine.
$439.95
GUN038
DON’T FORGET!! ALL OUR ROCK ISLANDS COME
WITH A LIFETIME FACTORY WARRANTY!
ROCK ISLAND & ARMSCOR FRAMES
Quality ‘Armscor’ 1911 frames in standard full size, compact, midsize, and tactical styles. These are precision CNC machined
from castings made from ordnance grade steel. Great chance to obtain a high precision, carefully machined, quality frame for
your ‘1911’ build! And all have correct ejectors installed! These are closeout prices and may never be available again!
GUN636 - Mid size, standard 1911 frame,.45 cal. parkerized. For 7 rd. magazines and 4.25" slides................................................................................................... $139.00
GUN641 - Full size, standard GI frame,.45 cal.,
parkerized..................................................$129.00
GUN637 - Mid size, Tactical frame with full length rail, .45 cal., parkerized. For 7 rd.
magazine & 4.25” slide......................................................................... $169.00
GUN642 - Full size Tactical frame with rail, .45cal.,
parkerized.................................................................. $169.00
GUN638 - Full size, standard Tactical frame with serrated front strap, .45 cal., parkerized.
............................................................................................................ $149.00
GUN643 - Full size wide body tactical frame with full length rail, 9mm cal.,
parkerized.................................................................. $200.00
GUN639 - Compact size, standard Tactical frame, .45 cal., parkerized. For 6 rd. magazine &
3.5" slide.............................................................................................. $169.00
GUN644 - Full size Tactical frame with full length rail, .40 S&W/10mm cal., parkerized.
............................................................................................................ $149.00
GUN640 - Wide body, standard GI frame,.45 cal.,parkerized
............................................................................................................ $199.00
GUN645 - Mid size Tactical frame with full length rail ,.40S&W/10mm cal., parkerized.
............................................................................................................ $159.00
15
www.e-sarcoinc.com
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
Phones Open: Mon - Fri, 8:30am – 5:00pm
Showroom Open: Monday Saturday, 10:00am–5:00pm, Friday til 8:00pm
BULGARIAN MAKAROVS
GUN466 $324.95 each, or buy 2 at $299.95 ea.
• Excellent- New Condition • 9x18 Makarov • Will be
shipped with 2 grips, 1 (black) and 1original (brown with
star)• Comes with 1 magazine, holster and cleaning rod
• Add extra mag for $19.95 each • Add a lanyard for
$4.95 • Hand select available for additional $19.95
I.O., INC. AKM247 RIFLE
Back In Stock! AKM247 (AK type) rifles
7.62x39
These rifles feature all new
parts with fully heat treated
receivers and black composite
furniture with heat shield.
Bolt hold open , recoil buffer,
cleaning kit and one mag.
$499.99 GUN578
(we also have some CA. Compliant rifles available) For an
additional $30.00
CHINESE TOKAREV 213 FRAME
Great deal on original Chinese Model 213 frames!
Perfect for a pistol build at an unbeatable price.
Used in good condition. While they last!
...................................................$9.95 GUN256
PPK & MINI COMPACT SHOULDER HOLSTER
East German Stasi low profile shoulder holster used
by numerous police agencies behind the Iron Curtain. Perfect for carrying backup pistols or maintaining a low profile with a sweater, vest, or dress jacket.
Original, natural leather.................$14.95 HOL092
IMAGINATION IS NOW THE MOTHER OF INVENTION!
***What could you build with a 93’ Mauser Action ?***
That unusual or unorthodox firearm design you’ve longed to build, could just be a little closer to
reality if you use our Mauser1893 Receiver. The opportunity is here and at a price designed to fit
anyone’s wallet!
Cholly has dreamed of a ‘Camp Gun’ project for years and has been putting away small ring short
Mauser actions. We now have come to market with the concept, but no time to do the project. We
will build a ‘camp gun’ when the time opens up! This project lends itself well to creating a short
barrel, lightweight gun built on a small ‘action’ similar to the classic German G33/40
mountain carbine. We can offer you the receiver by itself or a complete Receiver & Action.
RECEIVER alone: $20.00 Ea, 5 for $90.00,
10 for $160.00, 50 for $750.00 GUN001
RECEIVER & ACTION: $75.00 Ea ,
Or 10 for $650.00 GUN653
If you like the Flash Hider shown in the picture to the right, we
can offer it to you at $9.95 each, or 3 for $24.95 with a
purchase of a 93’ Mauser Receiver TOK087
Note: When building any gun, seek advice of a competent
gunsmith or expert, especially in experimental projects.
1903A4 U.S. SPRINGFIELD
SNIPER RIFLES
12 GA. PASI1 TACTICAL SHOTGUN
THE LATEST SARCO SLEEPER DISCOVERY
This may be the BEST Shotgun Deal on
the market! Proven reliability and affordability in one 12 Ga. Pump action shotgun
holding 4 rds in the tube and one in the chamber. Barrel is machined
from 4140 steel, honed & chrome lined in similar fashion to premium rifles.
Dual action bars are CNC machined and heat treated, bolt chromed and treated for
low luster finish and the overall finish is black. Additional notable features include an easy
point bead front sight, oversize 2 position cross bolt safety, 18.5" barrel, fixed recoil reducing stock
and smooth operating trigger. All of this jammed into an ‘easy day’ carry weight of just 8 lbs. Manufactured by ASI, they are known for using only the highest quality materials! This price is just too
good to pass! $179.00 each, 3 for $495.00 GUN571 FFL Dealers call for prices!
AR LOWER RECEIVER & KIT
Great Deal on Bushmaster lower receiver.
Just................................................... $79.95 GUN574
As a kit, we offer the Bushmaster lower receiver with the lower
receiver internal parts, grip, and collapsible buttstock, recoil
spring and buffer
.......................................................$139.95 GUN579
GUN ORDERING INFORMATION
•C
all our Ordering department, (610) 2503960, Monday – Friday 8:30 to 5:00. All guns
can only be shipped to FFL Dealers. All firearms laws apply. Please review your local &
federal laws. Please Note: All firearms, frames
& receivers should be checked or assemble by
a competent gunsmith before firing.Include
daytime phone number with your order.
• Guns can be ordered via credit card (Visa
or MasterCard only), check, or money order.
• Sorry we do not do COD’s.
A Note On Shipping Costs: (approximate)
Rifles: One rifle averages $15.00 to $20.00
+ insurance
3 rifles average $22.00 to $35.00 +
insurance
Pistols: via USPS - 1 pistol averages $20.00
to $25.00 + insurance
via USPS - 3 pistols averages $35.00
+ insurance
via UPS - 1 pistol averages $25.00
to $50.00
+ insurance
via UPS - 3 pistols average $70.00
to $80.00
+ insurance
Pistols to California (UPS only) about $55.00
to $60.00 + insurance
Hawaii & Alaska - via USPS - Pistols $25.00 via UPS Red - $90.00
UPS Rifles - 1 rifle $45.00 to $50.00,
3 rifles $90.00 - $95.00
Pennsylvania residence please add 6% sales tax
All charges are charged at actual cost of shipping & handling. Above information is for your
reference and reasonably accurate. For orders
with check or money orders, include sufficient
shipping - low range is East Coast and high
range is West Coast. All guns can only be
shipped to FFL Dealers or C&R Collectors for
C&R guns. All firearm laws apply. Please review
your local & federal laws. Massachusetts no
pistol or pistol frame sales. California Pistol
must be on approved list.
In accordance with California state law, pistols
can no longer be shipped to California by means
of the US Postal Service. All pistols will need to
go UPS Overnight or Overnight Saver.
Due to US Postal Service regulations, pistols,
revolvers, and other firearms capable of being
concealed on the person are NOT PERMITTED
to be mailed unless they are mailed to a manufacturer or dealer. C&R license holders are not
dealers and therefore cannot receive these firearms through the US Postal Service. C&R license
holders that wish to purchase pistols, revolvers,
and other firearms capable of being concealed
on the person will have to have them shipped
via UPS Overnight. PLEASE NOTE THAT SHIPPING CHARGES ARE NOT REFUNDABLE IF YOU
ARE NOT SATISFIED WITH YOUR PURCHASE.
Please Note: Prices in our ads are those for
shipments to FFL dealers – You may have your
choice shipped to your dealer. Some may vary
from prices in our showroom due to additional
over head and processing costs.
GALIL .223 RECEIVERS
We found you small lot of Galil
.223 receivers.
Only a few available
.....................$399.95 GUN289
STAR BM
Steel frame, 4"
barrel plastic
grips
Good $269.00
GUN440
STAR
MODEL
30PK
Good condition
$225.00 GUN409
STAR BS
The BS in a
normal second
model B but has the addition
mag safety. Made from
1957-1983
Good-VG $275.00 GUN434
STAR MODEL B – “SECOND
MODEL”
Production
started in
1931 and
ended in 1983 9mm
para blue finish. Good
bores. Good – VG
$265.00 GUN438
RE: RETURNED FIREARMS, SARCO IS NOT
RESPONSIBLE FOR ANY RETURN TRANSFER
FEES. BEFORE RETURNING ANY FIREARMS
TO SARCO, CALL AND GET AN RMA NUMBER FROM THE GUNROOM.
Stunning Price Busting Deal of 2015!
PARA ORDNANCE LDA PISTOL PACKAGE
Brand new LDA complete Frame assembly
in original Para Ordnance box! You can
purchase this alone or reap tremendous
savings on purchasing this with a SLIDE of your
choice. The Para steel Frame accepts 3.5 inch and
4.25" slides and can be used with 3" slides if the hood is
trimmed back - Will not work with a 5” slide. The frame is the
Officer’s Model LDA, single stack, and is not caliber specific so
you can customize it to 38 Super, 9mm, 40 S&W, .45 ACP. The
frame is cut for the Clark® type ramped barrels. The barrels and recoil
spring assemblies are available
from numerous commercial
sources and the frame accepts the
shorter 1911 Officers magazine.
Enormous savings will be
realized when you examine these
prices against the price of a new
LDA pistol of at $700-800!
1.Frame assembly in box
$235.00 GUN588
2.Slide of your choice – 40% off retail price online! Go to our website
and choose from a host of 3", 3.5"
& 4.25" Para LDA slides. Valid on up to 10
Para LDA slides when purchased with Frame assy in box.
Go to www.e-sarcoinc.com to make your selection.
Note: Para Ordnance Light Double Action Pistols are premium compact firearms popular
for ‘concealed carry’ and well respected for quality and performance. Para Ordnance has
been absorbed into Remington, and Sarco will also have a position in selling many of
the original quality parts. In fact, our substantial inventory of Para Ordnance parts, will
allow us to supply parts for many, many years to come!
with
proper
M73B1
Scope!
Small lot available. These rifles have original
1903A3 G.I. receivers and most parts are
original G.I. They have a new criterion 4 groove
barrel identical to the original. The scope is an
exact repro of the M73 B1 scope by HiLux with
some current technology internal improvements. External is exact repro. These guns
are produced by the acclaimed Rock Ridge
machine & are fully approved for CMP vintage
sniper rifle matches. Scope mount is an exact
repro—stock is beautiful “C” type full pistol
grip stock. Rifle is fully parkerized
......................................$1395.00 GUN564
1903A3 SPRINGFIELD
RIFLES FROM ‘THE PACIFIC’
A small number of good condition, firing
rifles from the HBO series, The Pacific,
are still available. These were wartime
rifles that served again in the filming of
the mini series. Most are Smith Corona
or Remington. Stored since the filming,
and each rifle is sold with certificates of
Authenticity, certificates of formal handling
from Customs documents, Armament prop
handlers, and the production firm. Chain
of custody is fully authenticated and Sarco
was the supplier and final recipient after
production. A rare chance to obtain a piece
of movie memorabilia and an actual firing
1903A3 Springfield. (FFL required).
$895.00 GUN369
SWEDISH MAUSER /CARL GUSTAV CG-63 MATCH RIFLE, (CROWN JEWEL)
6.5MM
Specially made in Swedish military arsenals for 300m ‘Match’ shooting.
They feature a heavy, non-stepped barrel, tuned trigger assembly , a stock
with Monte-Carlo check pieces on both sides, a pistol grip, short forend
and handguard. Barrels are free floated and sights are match quality micrometer aperture sights of various makes. The Swedish
equivalent of a U.S. National Match Springfield rifle. They were built in both Germany and Sweden, and were manufactured with
high grade tool steel and alloyed with vanadium, nickel and copper for superior strength and corrosion resistance. Renown for accuracy in the Swedish Army where it was designated the Gevar 6. Fewer than 40 pcs. available! Had these 12 years ago and they
went fast!!............................................................................................................................................................$795.00 GUN114
ATTENTION M1 CARBINE FANS:
Own A Piece of History. We just discovered a cache of German Erma-Werke EM1 .22LR carbines! These complete rifles resemble M1 Carbines…
except that they are in .22LR caliber and are dovetailed for a .22 scope
mount. The Israeli Military used them as trainers in the late 60’s and
early 70’s. The condition of these rifles is good with some stock dents and dings from training, shipping and storage. Bores are
excellent and have many years of life left in them. All Guns come with (1) 15 Round Magazine. We are also offering some rifles missing both front and rear sights at a lower price for those who wish to mount a scope on their EM1. Don’t procrastinate!! These rifles
won’t last long. This is a rare find!
GUN593 – Erma-Werke EM1 without Sights...................................................................................................................... $225.00
GUN596 – Erma-Werke without rear sight......................................................................................................................... $249.00
RM66 – Spare magazines also available.................................................................................................................................$59.95
THE RENOWNED FULTON ARMS M14 RECEIVER
There’s a reason that we are still using the M14 platform 50 years after its adoption..... IT DELIVERS! Whether you’re a military contractor heading to Iraq, Afghanistan, Kurdistan, Somalia
or American marksman looking for the basic or Sniper based Platform, this is a Solid Great
Deal. We offer 4 flavors of Semi Auto M14 Receivers precision made utilizing 8620 Alloy steel,
precision geometric CNC processing from Lost Wax Investment Castings & made in the USA!
Properly heat treated & core hardened to Mil Specification. We have 4 flavors of receiver:
A. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M14................................................................................ $549.95 GUN581
B. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M21 (NJ compliant)......................................................... $549.95 GUN582
C. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt, marked U.S. Rifle 7.62mm M14
........................................................................................................................................................................... $699.95 GUN583
D. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt, marked U.S. Rifle 7.62mm M21(NJ compliant)..................................................................................................................................................................... $699.95 GUN584
*Always assemble receiver with parts, by a qualified gunsmith who can check head spacing & fit for safety.