Section 1 (PDF - 3.7MB)
Transcription
Section 1 (PDF - 3.7MB)
HICKORY SAW & TOOL, INC. 406 9th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com Table of Contents Cover page……………………………………………………………………….……..1-2 Dedicated Insert raised panel cutters……………………………..……………….…….3-4 Stile & rail cutter sets…………………………………………………………….……..5-6 Multi-profile cutters……………………………………………………………….…….7-8 Finger joint cutters………………………………………………………………….……..9 Pricing on Service work, saw blades, dado sets……………………………………...10-16 ICK Inserts……………………………………………………………………………17-18 Panel saws……………………………………………………………………………….19 Split scoring & conic scoring saws………………………………………………………20 Hogging units…………………………………………………………………….…..21-22 Type “C” four flute countersinks………………………………………………...………23 Woodworking drills, countersinks, multi-spur and boring bits………………………24-51 Diamond tipped cutters and router bits……………………………………………….52-53 Hydraulic and straight bore moulder heads…………………………………………..54-55 HSS, jointer and planer knives……………………………………………………….56-57 Tool holders & collets .…………………………………..…………………………..58-59 ONSRUD ……..………………………………………………………………….…60-126 Solid carbide bits……..……………………………………………………………127-130 Carbide tipped straight bits………………………………………………………...131-132 Stagger tooth & mortise bits…………………………………………………………....133 Round and half-round bits ………………………………………………………….….134 V-Groove, Panel, and cove bits…………………………………………………….…..135 Rabbeting, round-over, ogee, flush, and Laminate bits………………….………..136-140 Solid Surface and T-Slot bits……………………………………………………...141-142 Edge profile bits…………………………………………………………………...143-145 Handrail & Molding bits……………………………………………………………..…146 Glue joint bits……………………………………………………………………...147-148 Groove profiles…………………………………………………………………………149 MDF door profiles…………………………………………………………………...…150 Stile & rail router bits………………………………………………………………......151 Raised panel router bits……………………………………………………………..….152 Cabinet, Door & Drawer, Window Sash bits……………………………………...153-155 Dovetail bits…………………………………………………………………………….156 Spoilboard & Slotting....................……………………………………………………..157 Dowel drills & Boring Bits.................................... …………………………………….158 Bearings & Accessories……………………………………………………………159-160 Pricing for pages (127-160)………………………………………………………..161-166 Conversion Charts…………………………………………………………………167-169 Page 2 RAISED PANEL CUTTERS DETAILS Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups, because inserts bolt against precision machined seats. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods. TECHNICAL SPECIFICATIONS: DIAMETER: 6” CUTTING CIRCLE BORE: 1-1/4” WINGS: 3 Clockwise or Counterclockwise rotation; material runs face down; “T” Bushings for ¾” spindle available upon request. Ball bearing rub collars are available upon request. CUSTOM PROFILES AVAILABLE Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools. MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results. Page 3 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 RAISED PANEL CUTTERS Page 4 STILE AND RAIL CUTTER SETS DETAILS Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups, because inserts bolt against precision machined seats. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods. TECHNICAL SPECIFICATIONS: DIAMETER: 4” SMALL CUTTING CIRCLE BORE: 1-1/4” WINGS: 3 Clockwise or Counterclockwise rotation; material runs face down; “T” Bushings for ¾” spindle available upon request. Ball bearing rub collars are available upon request. CUSTOM PROFILES AVAILABLE Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools. MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results. Page 5 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 STILE AND RAIL CUTTER SETS Page 6 MULTI-PROFILE CUTTERS DETAILS Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups. Utilizes HSS corrugated back backing plates so multiples of profiles can be achieved using only one cutter by just changing the inserts and backers. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods. TECHNICAL SPECIFICATIONS: DIAMETER: 4” SMALL CUTTING CIRCLE BORE: 1-1/4” WINGS: 3 Available in 40mm or 60mm wide; Clockwise or Counterclockwise rotation achieved with same cutter; material runs face down; “T” Bushings for ¾” spindle available upon request. Ball bearing rub collars are available upon request. MOULDER & TENON HEADS ALSO AVAILABLE These insert cutters can be supplied in any diameter and bore size per your requirements. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools. MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results. Page 7 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 MULTI-PROFILE CUTTERS Page 8 Page 9 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 PRICE LIST FOR C.T. CIRCULAR SAW BLADES ======================================================================= #OF TEETH DIA. > 0 TO 18" OVER 18" UP TO 36" ------------------------------------------------------------------------------------------------------------------------------0 - 29 . . . . . . . . . . . . . . . . . . . $10 . 00 . . . . . . . . . . .$16 . 00 30 - 40 . . . . . . . . . . . . . . . . . . . $14 . 00 . . . . . . . . . . .$24 . 00 41 - 60. . . . . . . . . . . . . . . . . . . . $15 . 00 . . . . . . . . . . . $25 . 00 61- 100. . . . . . . . . . . . . . . . . . . .$16 . 00 . . . . . . . . . . . $27 . 00 101 - 120. . . . . . . . . . . . . . . . . . $17 . 00 . . . . . . . . . . . $30 . 00 TIP REPLACEMENT =================== U P TO .220 KERF . . . . . . . . . . . . . . . . . . . . . . . .$1 . 50 EA. TIP OVER .220 KERF. . . . . . . . . . . . . . . . . . . . . . . SEE GROOVER TIP PRICE COMPLETE RETIP =================== TIP PRICE (X) NUMBER OF TEETH (NO SHARPENING CHARGE) ================================================================== DADO SETS ================== DADO SAWS . . . . . . . . . . . . . . . . . . . . . . . . . . SEE SHARPENING PRICES DADO FILLERS: KERF SHARPENING TIP REPLACEMENT -----------------------------------------------------------------------------------------------------------------------------------1 / 16 . . . . . . . . . . . . . . . . . . . . $ 6 . 00 . . . . . . . . . . . . . . . . . . $4 . 00 (EA. TIP) 1 / 8 . . . . . . . . . . . . . . . . . . . . $ 6 . 00 . . . . . . . . . . . . . . . . . . $4 . 00 (EA. TIP) 3 / 1 6 . . . . . . . . . . . . . . . . . $ 6 . 00 . . . . . . . . . . . . . . . . . . $4 . 00 (EA TIP) 1 / 4 . . . . . . . . . . . . . . . . . . . $ 8 . 00 . . . . . . . . . . . . . . . . . . $5 . 00 (EA. TIP) 5 / 16 . . . . . . . . . . . . . . . . . . . .$ 8 . 00 . . . . . . . . . . . . . . . . . . $6 . 00 (EA. TIP) 3 / 8 . . . . . . . . . . . . . . . . . . . . $ 8 . 00 . . . . . . . . . . . . . . . . . . $7 . 00 (EA. TIP) 1 / 2 . . . . . . . . . . . . . . . . . . . . $10. 00 . . . . . . . . . . . . . . . . . . $8 . 00 (EA. TIP) RETIP. . . . . . . . . . . . . . . . .#OF TIPS (X) TIP PRICE (NO SHARPENING CHARGE) =================================================================== MISCELLANEOUS SAW CHARGES OPENING BORE CHARGES ============================ UP TO 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 15 . 00 1" TO 1 1/2". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 20 . 00 1 1/2" TO 2 1/2". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 25 . 00 OVER 2 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 30 . 00 KEYWAYS BUSHINGS $20.00 EA UP TO 1". . . . . .$ 15 .00 1" TO 2". . . . . .$ 20 .00 2 TO 3" . . . . .$ 25 .00 HAMMER AND ROLL FOR TENSION AND STRAIGHTNESS UP TO 18" . . . . . . . . . . . . . . . . .$2 . 00 PER INCH OF DIAMETER OVER 18" . . . . . . . . . . . . . . . . .$3 . 00 PER INCH OF DIAMETER Page 10 PRICE LIST FOR SHARPENING CARBIDE TIPPED WING CUTTER ========================================================================= # OF WINGS CUTTING EDGE WIDTH 1 / 2" 1" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4- 1/2" ========================================================================= 2 $16.00 $16.00 $17.50 $17.50 $17.50 $20.50 $20.50 20.50 $22.50 3 $19.00 $19.00 $20.50 $23.00 $23.00 $23.00 $25.00 $25.00 $25.00 4 $20.00 $20.00 $22.50 $25.00 $25.00 $25.00 $27.50 $27.50 $27.50 6 $22.00 $22.00 $25.50 $29.00 $29.00 $29.00 $30.50 $30.50 $30.50 8 $25.00 $25.00 $28.00 $33.00 $33.00 $33.50 $35.50 $35.50 $35.50 10 $28.00 $28.00 $31.50 $36.00 $36.00 $36.50 $39.00 $39.00 $39.50 12 $28.00 $28.00 $31.50 $36.00 $36.00 $36.50 $39.00 $39.00 $39.50 (PRICE FOR OVER 4-1/2" WIDE: ADD $3.00 PER EACH 1/2" LARGER WIDTH) (RETIP PRICES QUOTED UPON REQUEST PER CUTTER) ======================================================================== PRICE LIST FOR GROOVERS # OF WINGS===== KERF> 1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4" ========================================================================= 2 ............................... $9.50 $10.00 $10.00 $11.50 $12.75 3 ............................... $11.50 $11.75 $12.50 $13.25 $14.25 4 ............................... $12.00 $12.25 $13.25 $14.00 $15.00 6 ............................... $13.75 $14.50 $16.00 $16.50 $15.75 8 ............................... $15.00 $15.75 $17.00 $18.00 $20.25 10 ............................... $16.50 $17.25 $18.75 $19.75 $21.50 12 ............................... $19.00 $20.50 $22.50 $23.00 $24.50 18 ............................... $22.00 $23.50 $25.25 $26.00 $28.00 24 ............................... $25.25 $26.50 $29.00 $30.00 $31.75 FOR KERFS OVER 3 / 4" GO TO CUTTER PRICE TIP REPLACEMENT FOR GROOVERS 1 / 4" $8.00 3 / 8" $8.00 1 / 2" 5 / 8" 3 / 4" $10.00 $12.00 $15.00 COMPLETE RETIP=+ #OF TIPS --NO SHARPENING CHARGE Page 11 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 PRICE LIST FOR SHARPENING PROFILE HEADS ========================================================================= # OF WINGS -------------------------2 UP TO 6" LONG --------------------------$22.50 OVER 6" LONG -------------------------$24.00 4 $24.50 $26.00 6 $24.50 $32.00 8 $27.50 $32.00 FOR MORE WINGS GO TO MOULDER HEAD PRICE ==================================================================== TIP REPLACEMENT IN PROFILE HEADS ===================================== 1 / 4" $8.00 3 / 8" $9.00 1 / 2" $10.00 5 / 8" $11.00 3 / 4" $13.00 COMPLETE RETIP = # OF TIPS NO SHARPENING CHARGE ======================================================================== PRICE LIST FOR SHARPENING SPIRAL PROFILE HEADS UP TO 6" LONG......$34.50 OVER 6" LONG.......$49.00 TIP REPLACEMENT ON SPIRALS QUOTED PER HEAD ========================================================================= PRICE LIST FOR SHARPENING STAGGERED TOOTH MOULDER HEADS WIDTH ROWS OF TEETH PRICE 4 4 $31.50 4 6 $33.50 4 8 $36.50 4 12 $43.50 6 6 $41.50 6 8 $49.00 6 12 $53.00 8 6 $55.00 8 8 $60.00 8 12 $70.00 10 6 $61.50 10 8 $65.00 10 12 $75.50 12 8 $83.00 12 12 $93.00 Page 12 PRICE LIST FOR MISC. ITEMS ========================================================================= HSS AND C.T. CARVING CUTTERS WIDTH: 0 TO 2" CEL. SHARPEN AND TURN DOWN COLLARS ------------------- $45.00 ========================================================================= HSS AND CT ROUTER BITS STRAIGHT CUT ...................................................................................... $8.00 GROUND TO PATTERN 2 WING.......................................................... $19.00 GROUND TO PATTERN 4 WINGBUC....................................................$22.00 REGRIND ENDS .................................................................................... $ 2.50 CUT OFF ................................................................................................ $ 3.50 REPROFILE 2 X SHARPENING PRICE ================================================================ HAUNCHING CUTTERS ------SHARPENING 2 PC. X 3" MAX CEL.. ...................................................$ 35.00 3 PC. OR 3" PLUS CEL. ...............................................$ 47.50 RETIP - - 3/4" TO 1-1/2" ..................................................$ 105.00 EA. PC. 1- 9/16" TO 3" ..................................................$ 150.00 EA. PC. ======================================================================== STRAIGHT CUTTING EDGE CORR.BACK MOULDER KNIVES HSS $1.00 PER INCH OF CEL. C. T. $2.70 PER INCH OF CEL. ========================================================================= GROUND TO PATTERN SHAPER & MOULDER KNIVES PER KNIFE SHARPEN & REPROFILE - COST PLUS $10.00 TEMPLATE CHARGE HSS WIDTH OF KNIFE: 1" - - - - - - - - - -2" - - - - - - - - - -3" - - - - - - - - - -4" $13.00 - - - - - -$17.00 - - - - - $21.00- - - - - - -$22.00 -------------------------------------------------------------------------------------------REPROFILE ONLY - - - - - - - - - - - - - - $13.00 TEMPLATE CHARGE -------------------------------------------------------------------------------------------C. T. WIDTH OF KNIFE: 1" - - - - - - - - - -2" - - - - - - - - - -3" - - - - - - - - - -4" $19.00 - - - - - - $21.00 - - - - - - $23.00 - - - - - - -$25.00 Page 13 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 PRICE LIST FOR MISC. ITEMS ========================================================================= DRILL SHARPENING HSS. AND C.T. CARBIDE TIPPED HSS BRADPOINT 1 / 8 " TO 1 / 2 " - - - $4.50 = = = = = = = = = == = = = UP TO 5 / 16 " - - - - - - - $2.00 33 / 64 " TO 1" - - - - - $5.50 = = = = = = = = = = = = = = 11 / 32 " TO 1 / 2" $3.00 9 / 16 "TO 3 / 4" $4.50 13 / 16 " TO 1-1 / 8 " - - - $6.50 ========================================================================= MULTI SPUR BIT SHARPENING HSS SHARPENING C.T. SHARPENING UP TO 1-1 / 2 " DIA. - - - - - - $8.00 EA. . . . . . . . . . . . . . . . . . . . . . . . . . . $9.50 EA. 1 - 9 / 16 " TO 2 - 1 / 2 " - - $9.50 EA. . . . . . . . . . . . . . . . . . . . . . . . . . . $11.00 EA. 2 - 9 / 16 " TO 3 - 1 / 2 " - - $10.00 EA . . . . . . . . . . . . . . . . . . . . . . . . . . $12.50 EA. OVER 3 - 1 / 2" - - - - - - - -$14.00 EA .. . . . . . . . . . . . . . . . . . . . . . . . . . $16.00 EA. MULTI SPUR TIP REPLACEMENT - - - - - - - - -1 - 4 TIPS . . . . . . .$ 10.00 EA. TIP 5 + TIPS . . . . . . . . . . .$ 9.00 EA. TIP CHIP LIFTERS. . . . . . . . .$ 25.00 EA. TIP ========================================================================= STEEL MOULDER FEED WHEEL SHARPENING UP TO 2 " - - - - -$65.00 EA - - - - - - - - - -2 " TO 3 " - - - - - - - - - -$80.00 EA. OVER 3 " WIDE ADD $10.00 PER INCH OF WIDTH (STANDARD FEED WHEELS ONLY - OTHERS QUOTED UPON REQUEST) REMILLING GROOVES IN FEED WHEELS - - - - - - - - - - - -$60.00 EA. REHARDENING FEEDWHEELS - - - - - - - - - - - - - - - - - - - -$35.00 EA. ========================================================================= BANDSAW GUIDE WHEELS # 0 WHEELS - - - -$ 110.00 EA . . . . . . . . . . . . . . .# 1 WHEELS - - - -$ 120.00 EA. ========================================================================= BANDSAW GUIDE JAWS PLAIN JAWS C. T. JAWS # 0 - - $80.00 EACH SET OF 4 PCS....................0 - - $ 110.00 EACH SET OF 4 PCS. # 1 - - $90.00 EACH SET OF 4 PCS....................1 - - $ 120.00 EACH SET OF 4 PCS. RETIP BANDSAW GUIDE PRICE - - - - - -$ 10.00 PER END TANNEWITZ R - 84 AND R- 84A JAWS PLAIN AND CT ARE AVAILABLE BANDSAW THROAT PLATES - - - - -SQUARE $ 38.00 EA. ROUND $48.00 EA. ========================================================================= Page 14 PRICE LIST FOR BANDSAW BLADES AND ROLL STOCK =================================================================== LENGTH WIDTH (IN FEET)--1/8 3 / 16 1/4 3/8 1/2 3/4 -----------------------------------------------------------------------------------------------------------------------------------9 10.50 10.50 10.50 10.50 10.50 13.00 -------------------------------------------------------------------------------------------------------------------------------------10 11.00 11.00 11.00 11.00 11.00 13.00 -------------------------------------------------------------------------------------------------------------------------------------11 11.50 11.50 11.50 11.50 11.50 15.00 -------------------------------------------------------------------------------------------------------------------------------------12 12.00 12.00 11.50 11.50 11.50 15.00 -------------------------------------------------------------------------------------------------------------------------------------13 12.50 12.50 11.50 11.50 11.50 16.00 -------------------------------------------------------------------------------------------------------------------------------------14 13.00 13.00 12.50 12.50 12.00 16.00 -------------------------------------------------------------------------------------------------------------------------------------15 13.50 13.50 12.25 12.25 12.25 17.00 -------------------------------------------------------------------------------------------------------------------------------------16 14.00 14.00 13.00 13.50 14.00 18.00 -------------------------------------------------------------------------------------------------------------------------------------17 14.00 14.00 13.00 13.50 14.00 19.00 -------------------------------------------------------------------------------------------------------------------------------------18 15.00 15.00 13.50 14.50 14.50 20.00 -------------------------------------------------------------------------------------------------------------------------------------19 16.50 16.50 15.00 15.50 16.00 22.00 -------------------------------------------------------------------------------------------------------------------------------------20 17.00 17.00 15.00 15.50 16.00 22.00 -------------------------------------------------------------------------------------------------------------------------------------21 17.50 17.50 16.00 16.50 17.00 22.00 -------------------------------------------------------------------------------------------------------------------------------------22 18.00 18.50 16.00 17.50 17.00 22.00 -------------------------------------------------------------------------------------------------------------------------------------FOR IN BETWEEN SIZES GO TO THE NEXT LONGER SIZE ALL WOOD CUTTING BLADES UP TO 8' LONG - - -$9.00 EA STANDARD METAL CUTTING 64-1/2" X 1 / 2 - - -$10.00 EA BANDSAW STOCK ROLL PRICES 1 / 4 - - - -$125.00 1 / 2 - - - -$167.00 UP TO 1 / 2 WIDE - - - -$4.00 .025 OR .032 THICK 3 / 8 - - - -$139.00 3 / 4 - - - -$175.00 WELD PRICES OVER 1 / 2 WIDE - - - -$5.00 BI-METAL BLADES - - - $10.00 SHARPENING CHARGE FOR BLADES UP TO 3 / 4 WIDE - - - -$4.50 OVER 3 / 4 WIDE - - - -$9.00 SHARPENING CHARGE FOR SPIRAL ROUTER BITS UP TO 1/2"DIA. 2 WING UPCUT OR DOWNCUT ...........$10.00 5/8"DIA. AND UP................................................$15.00 3 WING AND UP (ANYSIZE)..................................$15.00 SPIRAL COMPRESSION......2 FLUTE......$15.00 ......4FLUTE........$25.00 Page 15 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 NEW CARBIDE TIPPED SAWS (FLAT A.T.B. & T. CHIP) ========================================================================= DIAMETER NO. TEETH 8" 10" 12" 14" 16" 18" ========================================================================= 20 $70.25 72.75 $78.75 82.75 $87.00 $90.50 24 $77.00 78.75 $89.00 92.75 $95.25 $100.50 30 $92.50 95.00 $96.50 98.00 $102.50 $106.50 36 $100.00 102.00 $103.75 106.00 $110.00 $112.50 40 $104.75 106.25 $108.50 112.50 $118.25 $121.75 48 $114.25 116.00 $118.25 122.25 $128.25 $132.00 60 $128.25 129.75 $133.75 137.75 $139.25 $145.00 72 $143.00 144.50 $148.75 152.50 $156.50 $159.75 80 $163.50 165.50 $167.75 173.50 $177.00 $180.50 90 -------- ---------- $187.25 191.25 $195.00 $198.50 96 ------- --------$194.25 198.25 $202.00 $206.00 100 -------- --------- $204.75 210.75 $214.50 $217.50 120 ----------------------- 235.25 $243.00 $243.00 DADO HEADS DADO SAWS------PER ABOVE SAW SCHEDULE NEW DADO FILLERS: 1 / 16" 1 / 8" 1 / 4" =================================================================== 10” X 5/8 OR 1” BORE…. 12” X 1” BORE…………... 14” X 1” BORE…………. $34.50 $36.50 $41.25 $35.25 $37.00 $56.50 $47.25 $60.50 $68.25 (Providing filler blanks are available) BORING CHARGES FOR NEW SAWS ONLY UP TO 1” ..................................... $15.00 1” TO 1- 1 / 2 “................................ $20.00 1- 1 / 2” TO 2- 1 / 2 “....................... $25.00 Page 16 35° Standard reversible knives Standard Wendeschneidplatten Plaquettes reversibiles standard Coltelli reversibili standard Cuchillas reversibles standard L W T a T04F T03SMG T10MG TL15 T08SMG mm mm mm mm 7.5 8.6 9.0 12.0 12.0 12.0 1.5 1.5 1.5 12001 13182 12043 13811 13963 13734 14225 9.6 10.0 10.5 12.0 12.0 12.0 1.5 1.5 1.5 12015 13165 13167 13850 14010 30833 11.0 11.6 13.0 12.0 12.0 12.0 1.5 1.5 1.5 13168 13183 13170 13.6 14.6 15.0 12.0 12.0 12.0 1.5 1.5 1.5 13185 13186 12003 13819 13972 13741 14232 15.7 16.0 17.0 12.0 12.0 12.0 1.5 1.5 1.5 13172 13203 13173 18.0 12.0 1.5 13174 19.0 20.0 25.0 12.0 12.0 12.0 1.5 1.5 1.5 13175 12004 12025 13823 13853 13977 14013 13745 13766 14235 25.0 30.0 35.0 12.0 12.0 12.0 1.5 1.5 1.5 14.0 14.0 26.0 12011 12005 13208 13843 13828 14001 13982 13759 13749 14239 40.0 50.0 60.0 12.0 12.0 12.0 1.5 1.5 1.5 26.0 26.0 26.0 12014 12006 12007 13847 13834 13839 14006 13987 13994 13763 13753 13754 14255 14244 14248 T08MF T03SMG T10MG TL15 T08SMG L W T a mm mm mm mm 2.2 2.2 2.2 60.0 60.0 60.0 12008 12009 12010 13841 30831 30832 13997 13998 13999 13755 13756 13757 T04F T03SMG T10MG TL15 80.0 13.0 100.0 13.0 120.0 13.0 L W T a mm mm mm mm 20.0 9.0 1.5 24.0 30.0 40.0 50.0 9.0 9.0 9.0 9.0 1.5 1.5 1.5 1.5 T08SMG 13195 14.0 14.0 26.0 26.0 13197 13199 13200 13201 Page 17 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 Standard reversible knives Standard Wendeschneidplatten Plaquettes reversibiles standard Coltelli reversibili standard Cuchillas reversibles standard For Holz-Her system* L W T d mm mm mm mm T08MF 10.5 10.5 12.0 12.0 13.0 13.0 1.5 1.5 2.5 35° 35° 35° 4.0 4.0 4.0 17.0 17.0 17.0 17.0 19.0 19.0 2.0 2.0 2.0 35° 35° 35° 3.0 4.0 4.0 10.5 13.0 13.6 13.6 10.5 13.0 13.6 13.6 1.5 2.5 2.0 2.0 35° 30° 30° 45° 13324 13299 37522 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 1.2 1.7 1.7 2.0 30° 22° 30° 30° 13295 13297 13307 13273 14.0 14.0 1.2 30° 13303 14.3 14.3 14.6 14.6 15.0 15.0 2.5 2.5 2.5 35° 30° 30° 14.0 14.0 15.0 15.0 15.0 15.0 2.0 2.5 2.5 30° 30° 30° 15.0 15.0 2.5 30° 14.0 14.0 2.0 30° 21.0 21.0 5.5 40° T04F T03SMG T10MG TL15 13259 12002 13863 13815 14027 13968 13769 13737 16564 13265 13264 13864 30838 30830 30827 13770 30826 13328 16565 13266 40343 13260 13865 14028 13329 13314 13315 13276 43895 13320 R=50 R=150 44289 44486 22695 Page 18 13771 Page 19 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 Page 20 Page 21 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845 Page 22 Fuller Countersinks · Counterbores · Tapered Drills · Plug Cutters · Step Drills · Stop Collars Type ‘C’ Four Flute Countersinks Stock Number C8 Used to countersink and counterbore for heads of screws in woods, plastics and non-ferrous materials. Heat treated for long tool life. (see explanation on page 3 and size recommendations on page 4) C4 The countersink is held in place with two hex-socket screws and is easily adjustable up and down the drill so only one countersink and length of drill is required for one screw size. C92 Shown above Mounted on a Taper Point Drill with Stop Collar: This combination of Tapered Drill and Countersink, drills, Countersinks and Counterbores in one quick operation. Makes driving screws easier and assures the best possible holding power. Designed for clean cutting and hardened for long wear. Complete list of Taper Point Drills shown on page 6 & 7. Stop Collar (shown above mounted on Type “C” Countersink) can be furnished to control depth of cut. Stop Collar sizes are shown on page 6. C16 Shown above Mounted on a Brad or Regular Point Drill: This combination can be used to drill and countersink clearance through the material for screws and bolts or to drill pilot holes for other types of screws. The Countersinks can also be mounted on ordinary straight twist drills allowing the screw thread to cut its own hole or by using correct pilot drill size for root diameter of thread allowing shank of screw to force its way into the wood. See Screw Chart on page 4 for screw sizes. C244 Drills are not included unless specified. Types and sizes are shown on pages 36 through 42. To cut wood plug to fit in hole over head of screw, use matching Plug Cutter shown on page 9. Special sizes - Quotation on request. For left hand cutting add 50% to prices shown in price list and add L to stock number. Price includes two hex-socket set screws. Does not include drill or stop collar. See page 118 &119 for replacement set screws and hex keys. Also see page 117 for all sizes of Countersinks mounted on Taper Point Drills (and Stop Collars if required). C324 Page 23 C2 C3 C4 C44 C65 C410 C411 C43 C56 C57 * C5 * C6 * C7 * C8 * C9 C913 C97 C105 C1011 C103 * C10 C1014 C104 C122 C129 C125 C1211 * C92 * C102 * C12 C1415 * C14 C145 * C143 C167 * C16 C1617 * C169 C1619 * C18 C243 C247 C244 C245 C20 C24 C284 C285 C286 C287 C324 C326 C328 Stock Sizes Drill Cutting Hole Diameter Size 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 1 1 1 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 5/32 11/64 3/16 13/64 7/32 1/4 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 5/32 3/16 7/32 1/4 17/64 9/32 19/64 5/16 3/16 7/32 1/4 5/16 21/64 3/8 1/4 5/16 3/8 7/16 1/4 3/8 1/2 Overall Length 3/4 3/4 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1-1/16 1-1/16 1-1/16 1-1/16 1-1/16 1-1/16 1-1/16 1-1/16 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-3/8 1-1/2 Hickory Saw & Tool 1-800-762-8999 Fax 1-800-762-6845