AL 4 ENG - GIF Modul Kft

AMPLIROLL AL4 - Telescopic hoist
Range AL4
Container Length
(mini/maxi)
Fixed underride
(650 mm)
AMPLIROLLS
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
2300
LG mm 3100
2300
3400
2300
3600
2600
3800
2600
3900
2600
4000
2600
4100
2900
4200
2900
4300
2900
4400
2900
4500
Loading angle (maxi) *
Tipping angle
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
°
36
36
33
33
33
33
33
33
33
33
29
°
56
56
56
56
56
56
56
53
53
53
53
Hook lift length
LT mm 2660
2760
2860
2960
3060
3160
3260
3360
3460
3560
3660
Dist. hook to rear rollers
L1 mm 2550
2650
2750
2850
2950
3050
3150
3250
3350
3450
3550
Telescopic Jib stroke
L2 mm
550
650
750
550
650
750
850
650
750
850
950
Equipment net weight **
Pd Kg
605
615
625
635
645
655
665
675
685
695
705
Installation height
H
160
160
160
160
160
160
160
160
160
160
160
l/min
25
25
25
25
25
25
25
25
25
25
25
s
22
22
23
24
25
25
25
27
27
27
28
s
29
29
29
32
32
32
33
35
36
36
36
Operational cycle time
- Loading
- Unloading
mm
* These values are indicative, they depend of the truck , the length of the body and the final installation study.
** Assembled equipment net weight (excluding oil and without mounting accessories)
LG Mini & maxi body length will be confirmed by the study of the load distribution.
Indicated figures in this document are for information only and can be changed without any prior notice
January 2015 Rev : Ind 00
AMPLIROLL AL 4 – Hoist with telescopic jib
The key points of the telescopic hoist concept
Large range of units that will suit to all truck configuration
Hook translation enables to recover containers of
different lengths, with short rear overhang for installation
of fixed rear under ride bumper
Self-automatic mechanical lock to secure main arm and
tilting frame in tipping mode.
Tilting frame that remains fixed on the sub-frame when
loading bodies
Improved visibility to engage the hook to container
Pre-drilled frame for easier installation
Self-automatic lock between main arm and tilting frame
Standard configuration of the unit
Mechanical structure :
Electrical control with digital display
Intuitive digital interface
•
Steel with high tensile strength
•
Casting parts used for critical functions
•
A perfect mastery of the Jib translation, without
gliding pads.
•
Welding by robot welders and machining of the
articulations.
•
Modular assembling concept for a large equipment
range
•
Anti-corrosion treatment : grinding and prepainting of all mechanical welding components
Hydraulics :
Hyd. external locking – 2 rails width
Manual underride bumper
•
Hydraulic cylinders manufactured by Marrel
•
Check valve for main cylinder
•
Direction valve with electrical controls 12 V or 24V
•
Electrical cabin control with digital display
Safety and container locking
•
Rear hydraulic body locking ( outside or inside)
•
Safety device to prevent miss-use of the
equipment.
•
Operation instruction through the display
Options :
• Hook with mechanical safety lock
• Different hook height - local standard
Installation in Side box
Mechanical safety latch on hook
User’s friendly– Power safe – Insured resale
- Long lifetime - Reduced maintenance cost
• Hook height for higher ranged bodies
(1425 to 1570 mm )
• Rear hydraulic locking for two frame width 850 or
1060 mm
• Electro-pump unit 12 V or 24 V
• Finish painting in one RAL color
• Rear under ride bumper fixed or telescopic
M ARR EL S AS F ra n c e
Rond-Point Auguste Colonna - B.P.70056 42161 Andrézieux-Bouthéon cedex – France
Téléphone : +33 (0)4 77 36 28 28
Site internet : www.marrel.com
January 2015 Rev : Ind 00